cgroup: use a dedicated workqueue for cgroup destruction

commit e5fca243abae1445afbfceebda5f08462ef869d3 upstream.

Since be44562613851 ("cgroup: remove synchronize_rcu() from
cgroup_diput()"), cgroup destruction path makes use of workqueue.  css
freeing is performed from a work item from that point on and a later
commit, ea15f8ccdb430 ("cgroup: split cgroup destruction into two
steps"), moves css offlining to workqueue too.

As cgroup destruction isn't depended upon for memory reclaim, the
destruction work items were put on the system_wq; unfortunately, some
controller may block in the destruction path for considerable duration
while holding cgroup_mutex.  As large part of destruction path is
synchronized through cgroup_mutex, when combined with high rate of
cgroup removals, this has potential to fill up system_wq's max_active
of 256.

Also, it turns out that memcg's css destruction path ends up queueing
and waiting for work items on system_wq through work_on_cpu().  If
such operation happens while system_wq is fully occupied by cgroup
destruction work items, work_on_cpu() can't make forward progress
because system_wq is full and other destruction work items on
system_wq can't make forward progress because the work item waiting
for work_on_cpu() is holding cgroup_mutex, leading to deadlock.

This can be fixed by queueing destruction work items on a separate
workqueue.  This patch creates a dedicated workqueue -
cgroup_destroy_wq - for this purpose.  As these work items shouldn't
have inter-dependencies and mostly serialized by cgroup_mutex anyway,
giving high concurrency level doesn't buy anything and the workqueue's
@max_active is set to 1 so that destruction work items are executed
one by one on each CPU.

Hugh Dickins: Because cgroup_init() is run before init_workqueues(),
cgroup_destroy_wq can't be allocated from cgroup_init().  Do it from a
separate core_initcall().  In the future, we probably want to reorder
so that workqueue init happens before cgroup_init().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com
Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvils
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: pl061: move irqdomain initialization

commit 2ba3154d9cb13697b97723cce75633b48adfe826 upstream.

The PL061 driver had the irqdomain initialization in an unfortunate
place: when used with device tree (and thus passing the base IRQ
0) the driver would work, as this registers an irqdomain and waits
for mappings to be done dynamically as the devices request their
IRQs, whereas when booting using platform data the irqdomain core
would attempt to allocate IRQ descriptors dynamically (which works
fine) but also to associate the irq_domain_associate_many() on all
IRQs, which in turn will call the mapping function which at this
point will try to set the type of the IRQ and then tries to acquire
a non-initialized spinlock yielding a backtrace like this:

CPU: 0 PID: 1 Comm: swapper Not tainted 3.13.0-rc1+ #652
Backtrace:
[<c0016f0c>] (dump_backtrace) from [<c00172ac>] (show_stack+0x18/0x1c)
 r6:c798ace0 r5:00000000 r4:c78257e0 r3:00200140
[<c0017294>] (show_stack) from [<c0329ea0>] (dump_stack+0x20/0x28)
[<c0329e80>] (dump_stack) from [<c004fa80>] (__lock_acquire+0x1c0/0x1b80)
[<c004f8c0>] (__lock_acquire) from [<c0051970>] (lock_acquire+0x6c/0x80)
 r10:00000000 r9:c0455234 r8:00000060 r7:c047d798 r6:600000d3 r5:00000000
 r4:c782c000
[<c0051904>] (lock_acquire) from [<c032e484>] (_raw_spin_lock_irqsave+0x60/0x74)
 r6:c01a1100 r5:800000d3 r4:c798acd0
[<c032e424>] (_raw_spin_lock_irqsave) from [<c01a1100>] (pl061_irq_type+0x28/0x)
 r6:00000000 r5:00000000 r4:c798acd0
[<c01a10d8>] (pl061_irq_type) from [<c0059ef4>] (__irq_set_trigger+0x70/0x104)
 r6:00000000 r5:c01a10d8 r4:c046da1c r3:c01a10d8
[<c0059e84>] (__irq_set_trigger) from [<c005b348>] (irq_set_irq_type+0x40/0x60)
 r10:c043240c r8:00000060 r7:00000000 r6:c046da1c r5:00000060 r4:00000000
[<c005b308>] (irq_set_irq_type) from [<c01a1208>] (pl061_irq_map+0x40/0x54)
 r6:c79693c0 r5:c798acd0 r4:00000060
[<c01a11c8>] (pl061_irq_map) from [<c005d27c>] (irq_domain_associate+0xc0/0x190)
 r5:00000060 r4:c046da1c
[<c005d1bc>] (irq_domain_associate) from [<c005d604>] (irq_domain_associate_man)
 r8:00000008 r7:00000000 r6:c79693c0 r5:00000060 r4:00000000
[<c005d5d0>] (irq_domain_associate_many) from [<c005d864>] (irq_domain_add_simp)
 r8:c046578c r7:c035b72c r6:c79693c0 r5:00000060 r4:00000008 r3:00000008
[<c005d814>] (irq_domain_add_simple) from [<c01a1380>] (pl061_probe+0xc4/0x22c)
 r6:00000060 r5:c0464380 r4:c798acd0
[<c01a12bc>] (pl061_probe) from [<c01c0450>] (amba_probe+0x74/0xe0)
 r10:c043240c r9:c0455234 r8:00000000 r7:c047d7f8 r6:c047d744 r5:00000000
 r4:c0464380

This moves the irqdomain initialization to a point where the spinlock
and GPIO chip are both fully propulated, so the callbacks can be used
without crashes.

I had some problem reproducing the crash, as the devm_kzalloc():ed
zeroed memory would seemingly mask the spinlock as something OK,
but by poisoning the lock like this:

u32 *dum;
dum = (u32 *) &chip->lock;
*dum = 0xaaaaaaaaU;

I could reproduce, fix and test the patch.

Reported-by: Russell King <linux@arm.linux.org.uk>
Cc: Rob Herring <robherring2@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: lg: fix ReportDescriptor for Logitech Formula Vibration

commit 7f50547059bd55ac6a98c29fd1989421bdc36ec9 upstream.

By default the Logitech Formula Vibration presents a combined accel/brake
axis ('Y'). This patch modifies the HID descriptor to present seperate
accel/brake axes ('Y' and 'Z').

Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID:hid-lg4ff: Initialize device properties before we touch autocentering.

commit 114a55cf9dd1576e7ac56189832cd4d7dc56c218 upstream.

Re-arrange code slightly to ensure that device properties are configured
before calling auto-center command.

Reported-by: Michal Malý <madcatxster@prifuk.cz>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID:hid-lg4ff: Switch autocentering off when strength is set to zero.

commit d2c02da549b468bbb28e67d269bd3c9e10683ff5 upstream.

When the autocenter is set to zero, this patch issues a command to
totally disable the autocenter - this results in less resistance
in the wheel.

Reported-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID:hid-lg4ff: Scale autocentering force properly on Logitech wheel

commit f8c231569a7a455dfa1907294a46ba52b3aa8859 upstream.

Adjust the scaling and lineartity to match that of the Windows
driver (from MOMO testing).

Reported-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: multicouh: add PID VID to support 1 new Wistron optical touch device

commit bf9d121efc18c30caa2caad85358cf9408eca117 upstream.

This patch adds PID VID to support for the Wistron Inc. Optical touch panel.

Signed-off-by: KaiChung Cheng <kenny_cheng@wistron.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hid-sensor-hub: fix report size

commit d4b1bba76171cb783e32441b28462fe841073ed8 upstream.

Most of the hid sensor field size is reported in report_size field
in the report descriptor. For rotation fusion sensor the quaternion
data is 16 byte field, the report size was set to 4 and report
count field is set to 4. So the total size is 16 bytes. But the current
driver has a bug and not taking account for report count field. This
causes user space to see only 4 bytes of data sent via IIO interface.
The number of bytes in a field needs to take account of report_count
field. Need to multiply report_size and report_count to get total
number of bytes.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: hid-multitouch: add support for SiS panels

commit a6802e008e19845fd9669511b895f7515ef9c48b upstream.

Add support for SiS multitouch panels.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: logitech - lg2ff: Add IDs for Formula Vibration Feedback Wheel

commit bd04363d3990c0727b7512a79a08c68436878bb0 upstream.

Add USB IDs for Logitech Formula Vibration Feedback Wheel (046d:ca04).

The lg2ff force feedback subdriver is used for vibration and
HID_GD_MULTIAXIS is set to avoid deadzone like other Logitech wheels.

Kconfig description etc are also updated accordingly.

Signed-off-by: Elias Vanderstuyft <Elias.vds@gmail.com>
[anssi.hannula@iki.fi: added description and CCs]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: multitouch: Fix GeneralTouch products and add more PIDs

commit 7b2262920db2b98fe2cd32cde52141f02fd9eecf upstream.

GeneralTouch products should use the quirk SLOT_IS_CONTACTID
instead of SLOT_IS_CONTACTNUMBER.

Adding PIDs 0101,e100,0102,0106,010a from the new products.

Tested on new and older products by GeneralTouch engineers.

Signed-off-by: Luosong <android@generaltouch.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9p: send uevent after adding/removing mount_tag attribute

commit e0d6cb9cd3a3ac8a3b8e5b22b83c4f8619786f22 upstream.

This driver adds an attribute to the existing virtio device so a CHANGE
event is required in order udev rules to make use of it. The ADD event
happens before this driver is probed and unlike a more typical driver
like a block device there isn't a higher level device to watch for.

Signed-off-by: Michael Marineau <michael.marineau@coreos.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: armada-370: fix tclk frequencies

commit 1022c75f5abd3a3b25e679bc8793d21bedd009b4 upstream.

This patch fixes the tclk frequency array for the Armada-370 SoC.
This bug has been introduced by commit 6b72333d
("clk: mvebu: add Armada 370 SoC-centric clock init").

A wrong tclk frequency affects the following drivers: mvsdio, mvneta,
i2c-mv64xxx and mvebu-devbus. This list may be incomplete.

About the mvneta Ethernet driver, note that the tclk frequency is used
to compute the Rx time coalescence. Then, this bug harms the coalescence
configuration and also degrades the networking performances with the
default values.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Michael Turquette <mturquette@deferred.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: highbank-cpufreq: Enable Midway/ECX-2000

commit fbbc5bfb44a22e7a8ef753a1c8dfb448d7ac8b85 upstream.

Calxeda's new ECX-2000 part uses the same cpufreq interface as highbank,
so add it to the driver's compatibility list.

This is a minor change that can safely be applied to the 3.10 and 3.11
stable trees.

Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: usbtouchscreen: ignore eGalax/D-Wav/EETI HIDs

commit ae2aa3a512fa5f50f67feba9e66bc2efb394bd63 upstream.

The HID driver now handles these devices, regardless of what protocol
the device claims it supports.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: don't ignore eGalax/D-Wav/EETI HIDs

commit 95d50b6c5e18ff7351c5f2a6ff53afaed5f7e664 upstream.

Certain devices with class HID, protocol None did not work with the HID
driver at one point, and as a result were bound to usbtouchscreen
instead as of commit 139ebe8 ("Input: usbtouchscreen - fix eGalax HID
ignoring").  This change was prompted by the following report:

https://lkml.org/lkml/2009/1/25/127

Unfortunately, the device mentioned in this report is no longer
available for testing.

We've recently discovered that some devices with class HID, protocol
None do not work with usbtouchscreen, but do work with usbhid.  Here is
the report that made this evident:

http://comments.gmane.org/gmane.linux.kernel.input/31710

Driver binding for these devices has flip-flopped a few times, so both
of the above reports were regressions.

This situation would appear to leave us with no easy way to bind every
device to the right driver.  However, in my own testing with several
devices I have not found a device with class HID that does not work with
the current HID driver.  It is my belief that changes to the HID driver
since the original report have likely fixed the issue(s) that made it
unsuitable at the time, and that we should prefer it over usbtouchscreen
for these devices.  In particular, HID quirks affecting these devices
were added/removed in the following commits since then:

fe6065d HID: add multi-input quirk for eGalax Touchcontroller
77933c3 Merge branch 'egalax' into for-linus
ebd11fe HID: Add quirk for eGalax touch controler.
d34c4aa HID: add no-get quirk for eGalax touch controller

This patch makes the HID driver no longer ignore eGalax/D-Wav/EETI
devices with class HID.  If there are in fact devices with class HID
that still do not work with the HID driver, we will see another round of
regressions.  In that case I propose we investigate why the device is
not working with the HID driver rather than re-introduce regressions for
functioning HID devices by again binding them to usbtouchscreen.

The corresponding change to usbtouchscreen will be made separately.

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add PNP modaliases

commit 78551277e4df57864b0b0e7f85c23ede2be2edb8 upstream.

This allows the module to be autoloaded in the common case.

In order to work on non-PnP systems the module should be compiled in or
loaded unconditionally at boot (c.f. modules-load.d(5)), as before.

Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: cypress_ps2 - do not consider data bad if palm is detected

commit 5df682b297f6b23ec35615ed7bb50cbb25d25869 upstream.

If hardware (or firmware) detects palm on the surface of the device it does
not mean that the data packet is bad from the protocol standpoint. Instead
of reporting PSMOUSE_BAD_DATA in this case simply threat it as if nothing
touches the surface.

BugLink: http://bugs.launchpad.net/bugs/1229361
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Tested-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: evdev - fall back to vmalloc for client event buffer

commit 92eb77d0ffbaa71b501a0a8dabf09a351bf4267f upstream.

evdev always tries to allocate the event buffer for clients using
kzalloc rather than vmalloc, presumably to avoid mapping overhead where
possible.  However, drivers like bcm5974, which claims support for
reporting 16 fingers simultaneously, can have an extraordinarily large
buffer.  The resultant contiguous order-4 allocation attempt fails due
to fragmentation, and the device is thus unusable until reboot.

Try kzalloc if we can to avoid the mapping overhead, but if that fails,
fall back to vzalloc.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Allow events to have NULL strings

commit 4e58e54754dc1fec21c3a9e824bc108b05fdf46e upstream.

If an TRACE_EVENT() uses __assign_str() or __get_str on a NULL pointer
then the following oops will happen:

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c127a17b>] strlen+0x10/0x1a
*pde = 00000000 ^M
Oops: 0000 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc1-test+ #2
Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006^M
task: f5cde9f0 ti: f5e5e000 task.ti: f5e5e000
EIP: 0060:[<c127a17b>] EFLAGS: 00210046 CPU: 1
EIP is at strlen+0x10/0x1a
EAX: 00000000 EBX: c2472da8 ECX: ffffffff EDX: c2472da8
ESI: c1c5e5fc EDI: 00000000 EBP: f5e5fe84 ESP: f5e5fe80
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 01f32000 CR4: 000007d0
Stack:
 f5f18b90 f5e5feb8 c10687a8 0759004f 00000005 00000005 00000005 00200046
 00000002 00000000 c1082a93 f56c7e28 c2472da8 c1082a93 f5e5fee4 c106bc61^M
 00000000 c1082a93 00000000 00000000 00000001 00200046 00200082 00000000
Call Trace:
 [<c10687a8>] ftrace_raw_event_lock+0x39/0xc0
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c106bc61>] lock_release+0x57/0x1a5
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c10824dd>] read_seqcount_begin.constprop.7+0x4d/0x75
 [<c1082a93>] ? ktime_get+0x29/0x69^M
 [<c1082a93>] ktime_get+0x29/0x69
 [<c108a46a>] __tick_nohz_idle_enter+0x1e/0x426
 [<c10690e8>] ? lock_release_holdtime.part.19+0x48/0x4d
 [<c10bc184>] ? time_hardirqs_off+0xe/0x28
 [<c1068c82>] ? trace_hardirqs_off_caller+0x3f/0xaf
 [<c108a8cb>] tick_nohz_idle_enter+0x59/0x62
 [<c1079242>] cpu_startup_entry+0x64/0x192
 [<c102299c>] start_secondary+0x277/0x27c
Code: 90 89 c6 89 d0 88 c4 ac 38 e0 74 09 84 c0 75 f7 be 01 00 00 00 89 f0 48 5e 5d c3 55 89 e5 57 66 66 66 66 90 83 c9 ff 89 c7 31 c0 <f2> ae f7 d1 8d 41 ff 5f 5d c3 55 89 e5 57 66 66 66 66 90 31 ff
EIP: [<c127a17b>] strlen+0x10/0x1a SS:ESP 0068:f5e5fe80
CR2: 0000000000000000
---[ end trace 01bc47bf519ec1b2 ]---

New tracepoints have been added that have allowed for NULL pointers
being assigned to strings. To fix this, change the TRACE_EVENT() code
to check for NULL and if it is, it will assign "(null)" to it instead
(similar to what glibc printf does).

Reported-by: Shuah Khan <shuah.kh@samsung.com>
Reported-by: Jovi Zhangwei <jovi.zhangwei@gmail.com>
Link: http://lkml.kernel.org/r/CAGdX0WFeEuy+DtpsJzyzn0343qEEjLX97+o1VREFkUEhndC+5Q@mail.gmail.com
Link: http://lkml.kernel.org/r/528D6972.9010702@samsung.com
Fixes: 9cbf117662e2 ("tracing/events: provide string with undefined size support")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Check leaf nodes to find aamix amps

commit 2ded3e5b61d61d0bc90bebb8004db6184c7db6eb upstream.

The current generic parser assumes blindly that the volume and mute
amps are found in the aamix node itself.  But on some codecs,
typically Analog Devices ones, the aamix amps are separately
implemented in each leaf node of the aamix node, and the current
driver can't establish the correct amp controls.  This is a regression
compared with the previous static quirks.

This patch extends the search for the amps to the leaf nodes for
allowing the aamix controls again on such codecs.
In this implementation, I didn't code to loop through the whole paths,
since usually one depth should suffice, and we can't search too
deeply, as it may result in the conflicting control assignments.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65641
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Initialize missing bass speaker pin for ASUS AIO ET2700

commit 1f0bbf03cb829162ec8e6d03c98aaaed88c6f534 upstream.

Add a fixup entry for the missing bass speaker pin 0x16 on ASUS ET2700
AiO desktop.  The channel map will be added in the next patch, so that
this can be backported easily to stable kernels.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65961
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Create Headhpone Mic Jack Mode when really needed

commit ced4cefc75fdb8be95eaee325ad0f6b2fc0a484b upstream.

When a headphone jack is configurable as input, the generic parser
tries to make it retaskable as Headphone Mic.  The switching can be
done smoothly if Capture Source control exists (i.e. there is another
input source).  Or when user explicitly enables the creation of jack
mode controls, "Headhpone Mic Jack Mode" will be created accordingly.

However, if the headphone mic is the only input source, we have to
create "Headphone Mic Jack Mode" control because there is no capture
source selection.  Otherwise, the generic parser assumes that the
input is constantly enabled, thus the headphone is permanently set
as input.  This situation happens on the old MacBook Airs where no
input is supported properly, for example.

This patch fixes the problem: now "Headphone Mic Jack Mode" is created
when such an input selection isn't possible.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Fix hp-mic mode without VREF bits

commit 16c0cefe8951b2c4b824fd06011ac1b359b1ab3b upstream.

When the hp mic pin has no VREF bits, the driver forgot to set PIN_IN
bit.  Spotted during debugging old MacBook Airs.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65681
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add support of ALC231 codec

commit ba4c4d0a9021ab034554d532a98133d668b87599 upstream.

It's compatible with ALC269.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Set pcbeep amp for ALC668

commit 9ad54547cf6f4410eba83bb95dfd2a0966718d6d upstream.

Set the missing pcbeep default amp for ALC668.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuset: Fix memory allocator deadlock

commit 0fc0287c9ed1ffd3706f8b4d9b314aa102ef1245 upstream.

Juri hit the below lockdep report:

[    4.303391] ======================================================
[    4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[    4.303394] 3.12.0-dl-peterz+ #144 Not tainted
[    4.303395] ------------------------------------------------------
[    4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[    4.303399]  (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290
[    4.303417]
[    4.303417] and this task is already holding:
[    4.303418]  (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100
[    4.303431] which would create a new lock dependency:
[    4.303432]  (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...}
[    4.303436]

[    4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[    4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 {
[    4.303922]    HARDIRQ-ON-W at:
[    4.303923]                     [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0
[    4.303926]                     [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303929]                     [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303931]                     [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303933]    SOFTIRQ-ON-W at:
[    4.303933]                     [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0
[    4.303935]                     [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303940]                     [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303955]                     [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303959]    INITIAL USE at:
[    4.303960]                    [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0
[    4.303963]                    [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[    4.303966]                    [<ffffffff81063dd6>] kthreadd+0x86/0x180
[    4.303969]                    [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[    4.303972]  }

Which reports that we take mems_allowed_seq with interrupts enabled. A
little digging found that this can only be from
cpuset_change_task_nodemask().

This is an actual deadlock because an interrupt doing an allocation will
hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin
forever waiting for the write side to complete.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Mel Gorman <mgorman@suse.de>
Reported-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: fix ordered workqueues in NUMA setups

commit 8a2b75384444488fc4f2cbb9f0921b6a0794838f upstream.

An ordered workqueue implements execution ordering by using single
pool_workqueue with max_active == 1.  On a given pool_workqueue, work
items are processed in FIFO order and limiting max_active to 1
enforces the queued work items to be processed one by one.

Unfortunately, 4c16bd327c ("workqueue: implement NUMA affinity for
unbound workqueues") accidentally broke this guarantee by applying
NUMA affinity to ordered workqueues too.  On NUMA setups, an ordered
workqueue would end up with separate pool_workqueues for different
nodes.  Each pool_workqueue still limits max_active to 1 but multiple
work items may be executed concurrently and out of order depending on
which node they are queued to.

Fix it by using dedicated ordered_wq_attrs[] when creating ordered
workqueues.  The new attrs match the unbound ones except that no_numa
is always set thus forcing all NUMA nodes to share the default
pool_workqueue.

While at it, add sanity check in workqueue creation path which
verifies that an ordered workqueues has only the default
pool_workqueue.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Libin <huawei.libin@huawei.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/uaccess: add missing page table walk range check

commit 71a86ef055f569b93bc6901f007bdf447dbf515f upstream.

When translating a user space address, the address must be checked against
the ASCE limit of the process. If the address is larger than the maximum
address that is reachable with the ASCE, an ASCE type exception must be
generated.

The current code simply ignored the higher order bits. This resulted in an
address wrap around in user space instead of an exception in user space.

Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:accel:kxsd9 fix missing mutex unlock

commit 0ee005c7dc2803125275e24598f0fb37775a6af3 upstream.

This will leave a lock held after reading from the device, preventing
any further reads.

Signed-off-by: Frank Zago <frank@zago.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/signals: Improved mark VSX not saved with small contexts fix

commit ec67ad82814bee92251fd963bf01c7a173856555 upstream.

In a recent patch:
  commit c13f20ac48328b05cd3b8c19e31ed6c132b44b42
  Author: Michael Neuling <mikey@neuling.org>
  powerpc/signals: Mark VSX not saved with small contexts

We fixed an issue but an improved solution was later discussed after the patch
was merged.

Firstly, this patch doesn't handle the 64bit signals case, which could also hit
this issue (but has never been reported).

Secondly, the original patch isn't clear what MSR VSX should be set to.  The
new approach below always clears the MSR VSX bit (to indicate no VSX is in the
context) and sets it only in the specific case where VSX is available (ie. when
VSX has been used and the signal context passed has space to provide the
state).

This reverts the original patch and replaces it with the improved solution.  It
also adds a 64 bit version.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: uhid: fix leak for 64/32 UHID_CREATE

commit 80897aa787ecd58eabb29deab7cbec9249c9b7e6 upstream.

UHID allows short writes so user-space can omit unused fields. We
automatically set them to 0 in the kernel. However, the 64/32 bit
compat-handler didn't do that in the UHID_CREATE fallback. This will
reveal random kernel heap data (of random size, even) to user-space.

Fixes: befde0226a59 ('HID: uhid: make creating devices work on 64/32 systems')

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix calculation of stacking limits on level change.

commit 02e5f5c0a0f726e66e3d8506ea1691e344277969 upstream.

The various ->run routines of md personalities assume that the 'queue'
has been initialised by the blk_set_stacking_limits() call in
md_alloc().

However when the level is changed (by level_store()) the ->run routine
for the new level is called for an array which has already had the
stacking limits modified.  This can result in incorrect final
settings.

So call blk_set_stacking_limits() before ->run in level_store().

A specific consequence of this bug is that it causes
discard_granularity to be set incorrectly when reshaping a RAID4 to a
RAID0.

This is suitable for any -stable kernel since 3.3 in which
blk_set_stacking_limits() was introduced.

Reported-and-tested-by: "Baldysiak, Pawel" <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

setfacl removes part of ACL when setting POSIX ACLs to Samba

commit b1d93356427be6f050dc55c86eb019d173700af6 upstream.

setfacl over cifs mounts can remove the default ACL when setting the
(non-default part of) the ACL and vice versa (we were leaving at 0
rather than setting to -1 the count field for the unaffected
half of the ACL.  For example notice the setfacl removed
the default ACL in this sequence:

steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir ; setfacl
-m default:user:test:rwx,user:test:rwx /mnt/test-dir
getfacl: Removing leading '/' from absolute path names
user::rwx
group::r-x
other::r-x
default:user::rwx
default:user:test:rwx
default:group::r-x
default:mask::rwx
default:other::r-x

steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir
getfacl: Removing leading '/' from absolute path names
user::rwx
user:test:rwx
group::r-x
mask::rwx
other::r-x

Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

edac, highbank: Fix interrupt setup of mem and l2 controller

commit a72b8859fd3941cc1d2940d5c43026d2c6fb959e upstream.

Register and enable interrupts after the edac registration. Otherwise
incomming ecc error interrupts lead to crashes during device setup.

Fixing this in drivers for mc and l2.

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Robert Richter <rric@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

radeon: workaround pinning failure on low ram gpu

commit 97b6ff6be9da7675aab339334fda996d6c5077d9 upstream.

GPU with low amount of ram can fails at pinning new framebuffer before
unpinning old one. On such failure, retry with unpinning old one before
pinning new one allowing to work around the issue. This is somewhat
ugly but only affect those old GPU we care about.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: don't share PPLLs on DCE4.1

commit 70471860ff9f335c60c004d42ebd48945bfa5403 upstream.

Sharing PPLLs seems to cause problems on some boards.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=45334

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: activate UVD clocks before sending the destroy msg

commit c154a76311293f9671439286834aa325b7ef59fe upstream.

Make sure the UVD clocks are still active before sending
the destroy message, otherwise the hw might hang.

Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/si: fix define for MC_SEQ_TRAIN_WAKEUP_CNTL

commit d5693761b2b4ff530c8af8af9ec55b6eae76e617 upstream.

Typo in the register offset.

Noticed-by: Sylvain BERTRAND <sylware@legeek.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence

commit 9360bd1112d8874d21942e2ae74f5416b00a8db6 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: flush cursors harder

commit b2ea8ef559b4d94190009f3651b5b3ab7c05afd3 upstream.

Apparently they need the same treatment as primary planes. This fixes
modesetting failures because of stuck cursors (!) on Thomas' i830M
machine.

I've figured while at it I'll also roll it out for the ivb 3 pipe
version of this function. I didn't do this for i845/i865 since Bspec
says the update mechanism works differently, and there's some
additional rules about what can be updated in which order.

Tested-by: Thomas Richter <thor@math.tu-berlin.de>
Cc: Thomas Richter <thor@math.tu-berlin.de>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Fix ttm_bo_move_memcpy

commit da95c788ef0c645378ffccb7060a0df1a33aee38 upstream.

All error paths will want to keep the mm node, so handle this at the
function exit. This fixes an ioremap failure error path.
Also add some comments to make the function a bit easier to understand.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Handle in-memory region copies

commit 9a0599ddeae012a771bba5e23393fc52d8a59d89 upstream.

Fix the case where the ttm pointer may be NULL causing
a NULL pointer dereference.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ttm: Fix memory type compatibility check

commit 59c8e66378fb78adbcd05f0d09783dde6fef282b upstream.

Also check the busy placements before deciding to move a buffer object.
Failing to do this may result in a completely unneccessary move within a
single memory type.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Fix function graph with loading of modules

commit 8a56d7761d2d041ae5e8215d20b4167d8aa93f51 upstream.

Commit 8c4f3c3fa9681 "ftrace: Check module functions being traced on reload"
fixed module loading and unloading with respect to function tracing, but
it missed the function graph tracer. If you perform the following

 # cd /sys/kernel/debug/tracing
 # echo function_graph > current_tracer
 # modprobe nfsd
 # echo nop > current_tracer

You'll get the following oops message:

 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9()
 Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt
 CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
  0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000
  0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668
  ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000
 Call Trace:
  [<ffffffff814fe193>] dump_stack+0x4f/0x7c
  [<ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b
  [<ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9
  [<ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c
  [<ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9
  [<ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364
  [<ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b
  [<ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78
  [<ffffffff810c4b30>] graph_trace_reset+0xe/0x10
  [<ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a
  [<ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd
  [<ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde
  [<ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e
  [<ffffffff81122aed>] vfs_write+0xab/0xf6
  [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
  [<ffffffff81122dbd>] SyS_write+0x59/0x82
  [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
  [<ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b
 ---[ end trace 940358030751eafb ]---

The above mentioned commit didn't go far enough. Well, it covered the
function tracer by adding checks in __register_ftrace_function(). The
problem is that the function graph tracer circumvents that (for a slight
efficiency gain when function graph trace is running with a function
tracer. The gain was not worth this).

The problem came with ftrace_startup() which should always be called after
__register_ftrace_function(), if you want this bug to be completely fixed.

Anyway, this solution moves __register_ftrace_function() inside of
ftrace_startup() and removes the need to call them both.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Fixes: ed926f9b35cd ("ftrace: Use counters to enable functions to trace")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

prism54: set netdev type to "wlan"

commit 8e3ffa471091c560deb6738ed9ab7445b7a5fd04 upstream.

Userspace uses the netdev devtype for stuff like device naming and type
detection.  Be nice and set it.  Remove the pointless #if/#endif around
SET_NETDEV_DEV too.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

avr32: fix out-of-range jump in large kernels

commit d617b338bbfdd77e9cbd8e7dc949cee3dd73d575 upstream.

This patch fixes following error (for big kernels):

---8<---
arch/avr32/boot/u-boot/head.o: In function `no_tag_table':
(.init.text+0x44): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o
arch/avr32/kernel/built-in.o: In function `bad_return':
(.ex.text+0x236): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o
--->8---

It comes up when the kernel increases and 'panic()' is too far away to fit in
the +/- 2MiB range. Which in turn issues from the 21-bit displacement in
'br{cond4}' mnemonic which is one of the two ways to do jumps (rjmp has just
10-bit displacement and therefore a way smaller range). This fact was stated
before in 8d29b7b9f81d6b83d869ff054e6c189d6da73f1f.
One solution to solve this is to add a local storage for the symbol address
and just load the $pc with that value.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

avr32: setup crt for early panic()

commit 7a2a74f4b856993218aa7cdeeb6c3103101340db upstream.

Before the CRT was (fully) set up in kernel_entry (bss cleared before in
_start, but also not before jump to panic() in no_tag_table case).

This patch fixes this up to have a fully working CRT when branching to panic()
in no_tag_table.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: correct locking in selinux_netlbl_socket_connect)

commit 42d64e1add3a1ce8a787116036163b8724362145 upstream.

The SELinux/NetLabel glue code has a locking bug that affects systems
with NetLabel enabled, see the kernel error message below.  This patch
corrects this problem by converting the bottom half socket lock to a
more conventional, and correct for this call-path, lock_sock() call.

 ===============================
 [ INFO: suspicious RCU usage. ]
 3.11.0-rc3+ #19 Not tainted
 -------------------------------
 net/ipv4/cipso_ipv4.c:1928 suspicious rcu_dereference_protected() usage!

 other info that might help us debug this:

 rcu_scheduler_active = 1, debug_locks = 0
 2 locks held by ping/731:
  #0:  (slock-AF_INET/1){+.-...}, at: [...] selinux_netlbl_socket_connect
  #1:  (rcu_read_lock){.+.+..}, at: [<...>] netlbl_conn_setattr

 stack backtrace:
 CPU: 1 PID: 731 Comm: ping Not tainted 3.11.0-rc3+ #19
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  0000000000000001 ffff88006f659d28 ffffffff81726b6a ffff88003732c500
  ffff88006f659d58 ffffffff810e4457 ffff88006b845a00 0000000000000000
  000000000000000c ffff880075aa2f50 ffff88006f659d90 ffffffff8169bec7
 Call Trace:
  [<ffffffff81726b6a>] dump_stack+0x54/0x74
  [<ffffffff810e4457>] lockdep_rcu_suspicious+0xe7/0x120
  [<ffffffff8169bec7>] cipso_v4_sock_setattr+0x187/0x1a0
  [<ffffffff8170f317>] netlbl_conn_setattr+0x187/0x190
  [<ffffffff8170f195>] ? netlbl_conn_setattr+0x5/0x190
  [<ffffffff8131ac9e>] selinux_netlbl_socket_connect+0xae/0xc0
  [<ffffffff81303025>] selinux_socket_connect+0x135/0x170
  [<ffffffff8119d127>] ? might_fault+0x57/0xb0
  [<ffffffff812fb146>] security_socket_connect+0x16/0x20
  [<ffffffff815d3ad3>] SYSC_connect+0x73/0x130
  [<ffffffff81739a85>] ? sysret_check+0x22/0x5d
  [<ffffffff810e5e2d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
  [<ffffffff81373d4e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff815d52be>] SyS_connect+0xe/0x10
  [<ffffffff81739a59>] system_call_fastpath+0x16/0x1b

Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / hotplug: Fix conflicted PCI bridge notify handlers

commit ca499fc87ed945094d952da0eb7eea7dbeb1feec upstream.

The PCI host bridge scan handler installs its own notify handler,
handle_hotplug_event_root(), by itself.  Nevertheless, the ACPI
hotplug framework also installs the common notify handler,
acpi_hotplug_notify_cb(), for PCI root bridges.  This causes
acpi_hotplug_notify_cb() to call _OST method with unsupported
error as hotplug.enabled is not set.

To address this issue, introduce hotplug.ignore flag, which
indicates that the scan handler installs its own notify handler by
itself.  The ACPI hotplug framework does not install the common
notify handler when this flag is set.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
[rjw: Changed the name of the new flag]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()

commit e7cc5cf74544d97d7b69e2701595037474db1f96 upstream.

The pcie_portdrv .probe() method calls pci_enable_device() once, in
pcie_port_device_register(), but the .remove() method calls
pci_disable_device() twice, in pcie_port_device_remove() and in
pcie_portdrv_remove().

That causes a "disabling already-disabled device" warning when removing a
PCIe port device.  This happens all the time when removing Thunderbolt
devices, but is also easy to reproduce with, e.g.,
"echo 0000:00:1c.3 > /sys/bus/pci/drivers/pcieport/unbind"

This patch removes the disable from pcie_portdrv_remove().

[bhelgaas: changelog, tag for stable]
Reported-by: David Bulkow <David.Bulkow@stratus.com>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: log the audit_names record type

commit d3aea84a4ace5ff9ce7fb7714cee07bebef681c2 upstream.

...to make it clear what the intent behind each record's operation was.

In many cases you can infer this, based on the context of the syscall
and the result. In other cases it's not so obvious. For instance, in
the case where you have a file being renamed over another, you'll have
two different records with the same filename but different inode info.
By logging this information we can clearly tell which one was created
and which was deleted.

This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: add child record before the create to handle case where create fails

commit 14e972b4517128ac8e30e3de2ee4fbd995084223 upstream.

Historically, when a syscall that creates a dentry fails, you get an audit
record that looks something like this (when trying to create a file named
"new" in "/tmp/tmp.SxiLnCcv63"):

    type=PATH msg=audit(1366128956.279:965): item=0 name="/tmp/tmp.SxiLnCcv63/new" inode=2138308 dev=fd:02 mode=040700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmp_t:s15:c0.c1023

This record makes no sense since it's associating the inode information for
"/tmp/tmp.SxiLnCcv63" with the path "/tmp/tmp.SxiLnCcv63/new". The recent
patch I posted to fix the audit_inode call in do_last fixes this, by making it
look more like this:

    type=PATH msg=audit(1366128765.989:13875): item=0 name="/tmp/tmp.DJ1O8V3e4f/" inode=141 dev=fd:02 mode=040700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmp_t:s15:c0.c1023

While this is more correct, if the creation of the file fails, then we
have no record of the filename that the user tried to create.

This patch adds a call to audit_inode_child to may_create. This creates
an AUDIT_TYPE_CHILD_CREATE record that will sit in place until the
create succeeds. When and if the create does succeed, then this record
will be updated with the correct inode info from the create.

This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record

commit 79f6530cb59e2a0af6953742a33cc29e98ca631c upstream.

The old audit PATH records for mq_open looked like this:

  type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023

...with the audit related changes that went into 3.7, they now look like this:

  type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655
  dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00
  obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926
  dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00
  obj=system_u:object_r:tmpfs_t:s15:c0.c1023
  type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq"

Both of these look wrong to me.  As Steve Grubb pointed out:

 "What we need is 1 PATH record that identifies the MQ.  The other PATH
  records probably should not be there."

Fix it to record the mq root as a parent, and flag it such that it
should be hidden from view when the names are logged, since the root of
the mq filesystem isn't terribly interesting.  With this change, we get
a single PATH record that looks more like this:

  type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914
  dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00
  obj=unconfined_u:object_r:user_tmpfs_t:s0

In order to do this, a new audit_inode_parent_hidden() function is
added.  If we do it this way, then we avoid having the existing callers
of audit_inode needing to do any sort of flag conversion if auditing is
inactive.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reported-by: Jiri Jaburek <jjaburek@redhat.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: fix info leak in AUDIT_GET requests

commit 64fbff9ae0a0a843365d922e0057fc785f23f0e3 upstream.

We leak 4 bytes of kernel stack in response to an AUDIT_GET request as
we miss to initialize the mask member of status_set. Fix that.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: use nlmsg_len() to get message payload length

commit 4d8fe7376a12bf4524783dd95cbc00f1fece6232 upstream.

Using the nlmsg_len member of the netlink header to test if the message
is valid is wrong as it includes the size of the netlink header itself.
Thereby allowing to send short netlink messages that pass those checks.

Use nlmsg_len() instead to test for the right message length. The result
of nlmsg_len() is guaranteed to be non-negative as the netlink message
already passed the checks of nlmsg_ok().

Also switch to min_t() to please checkpatch.pl.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: printk USER_AVC messages when audit isn't enabled

commit 0868a5e150bc4c47e7a003367cd755811eb41e0b upstream.

When the audit=1 kernel parameter is absent and auditd is not running,
AUDIT_USER_AVC messages are being silently discarded.

AUDIT_USER_AVC messages should be sent to userspace using printk(), as
mentioned in the commit message of 4a4cd633 ("AUDIT: Optimise the
audit-disabled case for discarding user messages").

When audit_enabled is 0, audit_receive_msg() discards all user messages
except for AUDIT_USER_AVC messages. However, audit_log_common_recv_msg()
refuses to allocate an audit_buffer if audit_enabled is 0. The fix is to
special case AUDIT_USER_AVC messages in both functions.

It looks like commit 50397bd1 ("[AUDIT] clean up audit_receive_msg()")
introduced this bug.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: fix wrong eth_hdr usage for bridged packets in AP mode

commit 8d93f1f309d38b65fce0b9f0de91ba6c96990c07 upstream.

The eth_hdr is never defined in this driver but it gets compiled
without any warning/error because kernel has defined eth_hdr.

Fix it by defining our own p_ethhdr and use it instead of eth_hdr.

Signed-off-by: Ujjal Roy <royujjal@gmail.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: correct packet length for packets from SDIO interface

commit d03b4aa77e1187b77dfe37d14a923547f00baa66 upstream.

While receiving a packet on SDIO interface, we allocate skb with
size multiple of SDIO block size. We need to resize this skb
after RX using packet length from RX header.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qxl: avoid an oops in the deferred io code.

commit cc87509d87696d7cd393882f5dedea01e03e41a9 upstream.

If we are using deferred io due to plymouth or X.org fbdev driver
we will oops in memcpy due to this pointless multiply here,

removing it fixes fbdev to start and not oops.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / runtime: Use pm_runtime_put_sync() in __device_release_driver()

commit baab52ded242c35a2290e1fa82e0cc147d0d8c1a upstream.

Commit fa180eb448fa (PM / Runtime: Idle devices asynchronously after
probe|release) modified __device_release_driver() to call
pm_runtime_put(dev) instead of pm_runtime_put_sync(dev) before
detaching the driver from the device.  However, that was a mistake,
because pm_runtime_put(dev) causes rpm_idle() to be queued up and
the driver may be gone already when that function is executed.
That breaks the assumptions the drivers have the right to make
about the core's behavior on the basis of the existing documentation
and actually causes problems to happen, so revert that part of
commit fa180eb448fa and restore the previous behavior of
__device_release_driver().

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: fa180eb448fa (PM / Runtime: Idle devices asynchronously after probe|release)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / hibernate: Avoid overflow in hibernate_preallocate_memory()

commit fd432b9f8c7c88428a4635b9f5a9c6e174df6e36 upstream.

When system has a lot of highmem (e.g. 16GiB using a 32 bits kernel),
the code to calculate how much memory we need to preallocate in
normal zone may cause overflow. As Leon has analysed:

 It looks that during computing 'alloc' variable there is overflow:
 alloc = (3943404 - 1970542) - 1978280 = -5418 (signed)
 And this function goes to err_out.

Fix this by avoiding that overflow.

References: https://bugzilla.kernel.org/show_bug.cgi?id=60817
Reported-and-tested-by: Leon Drugi <eyak@wp.pl>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-core: Fix memory corruption if blkcg_init_queue fails

commit fff4996b7db7955414ac74386efa5e07fd766b50 upstream.

If blkcg_init_queue fails, blk_alloc_queue_node doesn't call bdi_destroy
to clean up structures allocated by the backing dev.

------------[ cut here ]------------
WARNING: at lib/debugobjects.c:260 debug_print_object+0x85/0xa0()
ODEBUG: free active (active state 0) object type: percpu_counter hint:           (null)
Modules linked in: dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev ipt_MASQUERADE iptable_nat nf_nat_ipv4 msr nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand cpufreq_conservative spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack lm85 hwmon_vid snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq freq_table mperf sata_svw serverworks kvm_amd ide_core ehci_pci ohci_hcd libata ehci_hcd kvm usbcore tg3 usb_common libphy k10temp pcspkr ptp i2c_piix4 i2c_core evdev microcode hwmon rtc_cmos pps_core e100 skge floppy mii processor button unix
CPU: 0 PID: 2739 Comm: lvchange Tainted: G        W
3.10.15-devel #14
Hardware name: empty empty/S3992-E, BIOS 'V1.06   ' 06/09/2009
 0000000000000009 ffff88023c3c1ae8 ffffffff813c8fd4 ffff88023c3c1b20
 ffffffff810399eb ffff88043d35cd58 ffffffff81651940 ffff88023c3c1bf8
 ffffffff82479d90 0000000000000005 ffff88023c3c1b80 ffffffff81039a67
Call Trace:
 [<ffffffff813c8fd4>] dump_stack+0x19/0x1b
 [<ffffffff810399eb>] warn_slowpath_common+0x6b/0xa0
 [<ffffffff81039a67>] warn_slowpath_fmt+0x47/0x50
 [<ffffffff8122aaaf>] ? debug_check_no_obj_freed+0xcf/0x250
 [<ffffffff81229a15>] debug_print_object+0x85/0xa0
 [<ffffffff8122abe3>] debug_check_no_obj_freed+0x203/0x250
 [<ffffffff8113c4ac>] kmem_cache_free+0x20c/0x3a0
 [<ffffffff811f6709>] blk_alloc_queue_node+0x2a9/0x2c0
 [<ffffffff811f672e>] blk_alloc_queue+0xe/0x10
 [<ffffffffa04c0093>] dm_create+0x1a3/0x530 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6c07>] dev_create+0x57/0x2b0 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6bb0>] ? list_version_get_info+0xe0/0xe0 [dm_mod]
 [<ffffffffa04c6528>] ctl_ioctl+0x268/0x500 [dm_mod]
 [<ffffffff81097662>] ? get_lock_stats+0x22/0x70
 [<ffffffffa04c67ce>] dm_ctl_ioctl+0xe/0x20 [dm_mod]
 [<ffffffff81161aad>] do_vfs_ioctl+0x2ed/0x520
 [<ffffffff8116cfc7>] ? fget_light+0x377/0x4e0
 [<ffffffff81161d2b>] SyS_ioctl+0x4b/0x90
 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f
---[ end trace 4b5ff0d55673d986 ]---
------------[ cut here ]------------

This fix should be backported to stable kernels starting with 2.6.37. Note
that in the kernels prior to 3.5 the affected code is different, but the
bug is still there - bdi_init is called and bdi_destroy isn't.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ioatdma: fix selection of 16 vs 8 source path

commit 21e96c7313486390c694919522a76dfea0a86c59 upstream.

When performing continuations there are implied sources that need to be
added to the source count. Quoting dma_set_maxpq:

/* dma_maxpq - reduce maxpq in the face of continued operations
 * @dma - dma device with PQ capability
 * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
 *
 * When an engine does not support native continuation we need 3 extra
 * source slots to reuse P and Q with the following coefficients:
 * 1/ {00} * P : remove P from Q', but use it as a source for P'
 * 2/ {01} * Q : use Q to continue Q' calculation
 * 3/ {00} * Q : subtract Q from P' to cancel (2)
 *
 * In the case where P is disabled we only need 1 extra source:
 * 1/ {01} * Q : use Q to continue Q' calculation
 */

...fix the selection of the 16 source path to take these implied sources
into account.

Note this also kills the BUG_ON(src_cnt < 9) check in
__ioat3_prep_pq16_lock().  Besides not accounting for implied sources
the check is redundant given we already made the path selection.

Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ioatdma: fix sed pool selection

commit 5d48b9b5d80e3aa38a5161565398b1e48a650573 upstream.

The array to lookup the sed pool based on the number of sources
(pq16_idx_to_sedi) is 16 entries and expects a max source index.
However, we pass the total source count which runs off the end of the
array when src_cnt == 16.  The minimal fix is to just pass src_cnt-1,
but given we know the source count is > 8 we can just calculate the sed
pool by (src_cnt - 2) >> 3.

Cc: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: allocate buffer for messages with small number of arguments using GFP_NOIO

commit f36afb3957353d2529cb2b00f78fdccd14fc5e9c upstream.

dm-mpath and dm-thin must process messages even if some device is
suspended, so we allocate argv buffer with GFP_NOIO. These messages have
a small fixed number of arguments.

On the other hand, dm-switch needs to process bulk data using messages
so excessive use of GFP_NOIO could cause trouble.

The patch also lowers the default number of arguments from 64 to 8, so
that there is smaller load on GFP_NOIO allocations.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: fix a race condition between queuing new migrations and quiescing for a shutdown

commit 66cb1910df17b38334153462ec8166e48058035f upstream.

The code that was trying to do this was inadequate.  The postsuspend
method (in ioctl context), needs to wait for the worker thread to
acknowledge the request to quiesce.  Otherwise the migration count may
drop to zero temporarily before the worker thread realises we're
quiescing.  In this case the target will be taken down, but the worker
thread may have issued a new migration, which will cause an oops when
it completes.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm array: fix bug in growing array

commit 9c1d4de56066e4d6abc66ec188faafd7b303fb08 upstream.

Entries would be lost if the old tail block was partially filled.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm mpath: fix race condition between multipath_dtr and pg_init_done

commit 954a73d5d3073df2231820c718fdd2f18b0fe4c9 upstream.

Whenever multipath_dtr() is happening we must prevent queueing any
further path activation work.  Implement this by adding a new
'pg_init_disabled' flag to the multipath structure that denotes future
path activation work should be skipped if it is set.  By disabling
pg_init and then re-enabling in flush_multipath_work() we also avoid the
potential for pg_init to be initiated while suspending an mpath device.

Without this patch a race condition exists that may result in a kernel
panic:

1) If after pg_init_done() decrements pg_init_in_progress to 0, a call
   to wait_for_pg_init_completion() assumes there are no more pending path
   management commands.
2) If pg_init_required is set by pg_init_done(), due to retryable
   mode_select errors, then process_queued_ios() will again queue the
   path activation work.
3) If free_multipath() completes before activate_path() work is called a
   NULL pointer dereference like the following can be seen when
   accessing members of the recently destructed multipath:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
RIP: 0010:[<ffffffffa003db1b>]  [<ffffffffa003db1b>] activate_path+0x1b/0x30 [dm_multipath]
[<ffffffff81090ac0>] worker_thread+0x170/0x2a0
[<ffffffff81096c80>] ? autoremove_wake_function+0x0/0x40

[switch to disabling pg_init in flush_multipath_work & header edits by Mike Snitzer]
Signed-off-by: Shiva Krishna Merla <shivakrishna.merla@netapp.com>
Reviewed-by: Krishnasamy Somasundaram <somasundaram.krishnasamy@netapp.com>
Tested-by: Speagle Andy <Andy.Speagle@netapp.com>
Acked-by: Junichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: atmel-mci: fix oops in atmci_tasklet_func

commit fbd986cd420d1deeabf1039ec4e74075a5639db5 upstream.

In some cases, a NULL pointer dereference happens because data is NULL when
STATE_END_REQUEST case is reached in atmci_tasklet_func.

Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: atmel-mci: abort transfer on timeout error

commit c1fa3426aa5c782724c97394303d52228206eda4 upstream.

When a software timeout occurs, the transfer is not stopped. In DMA case,
it causes DMA channel to be stuck because the transfer is still active
causing following transfers to be queued but not computed.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reported-by: Alexander Morozov <etesial@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: ensure get_unmapped_area() returns higher address than mmap_min_addr

commit 2afc745f3e3079ab16c826be4860da2529054dd2 upstream.

This patch fixes the problem that get_unmapped_area() can return illegal
address and result in failing mmap(2) etc.

In case that the address higher than PAGE_SIZE is set to
/proc/sys/vm/mmap_min_addr, the address lower than mmap_min_addr can be
returned by get_unmapped_area(), even if you do not pass any virtual
address hint (i.e.  the second argument).

This is because the current get_unmapped_area() code does not take into
account mmap_min_addr.

This leads to two actual problems as follows:

1. mmap(2) can fail with EPERM on the process without CAP_SYS_RAWIO,
   although any illegal parameter is not passed.

2. The bottom-up search path after the top-down search might not work in
   arch_get_unmapped_area_topdown().

Note: The first and third chunk of my patch, which changes "len" check,
are for more precise check using mmap_min_addr, and not for solving the
above problem.

[How to reproduce]

--- test.c -------------------------------------------------
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/errno.h>

int main(int argc, char *argv[])
{
void *ret = NULL, *last_map;
size_t pagesize = sysconf(_SC_PAGESIZE);

do {
last_map = ret;
ret = mmap(0, pagesize, PROT_NONE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
// printf("ret=%p\n", ret);
} while (ret != MAP_FAILED);

if (errno != ENOMEM) {
printf("ERR: unexpected errno: %d (last map=%p)\n",
errno, last_map);
}

return 0;
}
---------------------------------------------------------------

$ gcc -m32 -o test test.c
$ sudo sysctl -w vm.mmap_min_addr=65536
vm.mmap_min_addr = 65536
$ ./test  (run as non-priviledge user)
ERR: unexpected errno: 1 (last map=0x10000)

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2400pci: fix RSSI read

commit 2bf127a5cc372b9319afcbae10b090663b621c8b upstream.

RSSI value is provided on word3 not on word2.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qeth: avoid buffer overflow in snmp ioctl

commit 6fb392b1a63ae36c31f62bc3fc8630b49d602b62 upstream.

Check user-defined length in snmp ioctl request and allow request
only if it fits into a qeth command buffer.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Reviewed-by: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Fix incorrect signal strength for unassociated AP

commit 78dbfecb95be4635b995af3bd29fa10013409fcd upstream.

The routine that processes received frames was returning the RSSI value for the
signal strength; however, that value is available only for associated APs. As
a result, the strength was the absurd value of 10 dBm. As a result, scans
return incorrect values for the strength, which causes unwanted attempts to roam.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192se: Fix incorrect signal strength for unassociated AP

commit b4ade797668e33b4e8353c2701ce01d7084dfafa upstream.

The routine that processes received frames was returning the RSSI value for the
signal strength; however, that value is available only for associated APs. As
a result, the strength was the absurd value of 10 dBm. As a result, scans
return incorrect values for the strength, which causes unwanted attempts to roam.

This patch fixes https://bugzilla.kernel.org/show_bug.cgi?id=63881.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Matthieu Baerts <matttbe@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192de: Fix incorrect signal strength for unassociated AP

commit 3545f3d5f4af715c914394123ce7725a9cf0a1c4 upstream.

The routine that processes received frames was returning the RSSI value for the
signal strength; however, that value is available only for associated APs. As
a result, the strength was the absurd value of 10 dBm. As a result, scans
return incorrect values for the strength, which causes unwanted attempts to roam.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/blkback: fix reference counting

commit ea5ec76d76da9279d12027c1828544c5ccbe7932 upstream.

If the permission check fails, we drop a reference to the blkif without
having taken it in the first place. The bug was introduced in commit
604c499cbbcc3d5fe5fb8d53306aa0fae1990109 (xen/blkback: Check device
permissions before allowing OP_DISCARD).

Cc: Jan Beulich <JBeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: avoid bh leak in retry path of ext4_expand_extra_isize_ea()

commit dcb9917ba041866686fe152850364826c4622a36 upstream.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: gpmi: fix kernel BUG due to racing DMA operations

commit 7b3d2fb92067bcb29f0f085a9fa9fa64920a6646 upstream.

[1] The gpmi uses the nand_command_lp to issue the commands to NAND chips.
    The gpmi issues a DMA operation with gpmi_cmd_ctrl when it handles
    a NAND_CMD_NONE control command. So when we read a page(NAND_CMD_READ0)
    from the NAND, we may send two DMA operations back-to-back.

    If we do not serialize the two DMA operations, we will meet a bug when

    1.1) we enable CONFIG_DMA_API_DEBUG, CONFIG_DMADEVICES_DEBUG,
         and CONFIG_DEBUG_SG.

    1.2) Use the following commands in an UART console and a SSH console:
         cmd 1: while true;do dd if=/dev/mtd0 of=/dev/null;done
         cmd 1: while true;do dd if=/dev/mmcblk0 of=/dev/null;done

    The kernel log shows below:
    -----------------------------------------------------------------
    kernel BUG at lib/scatterlist.c:28!
    Unable to handle kernel NULL pointer dereference at virtual address 00000000
      .........................
    [<80044a0c>] (__bug+0x18/0x24) from [<80249b74>] (sg_next+0x48/0x4c)
    [<80249b74>] (sg_next+0x48/0x4c) from [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4)
    [<80255398>] (debug_dma_unmap_sg+0x170/0x1a4) from [<8004af58>] (dma_unmap_sg+0x14/0x6c)
    [<8004af58>] (dma_unmap_sg+0x14/0x6c) from [<8027e594>] (mxs_dma_tasklet+0x18/0x1c)
    [<8027e594>] (mxs_dma_tasklet+0x18/0x1c) from [<8007d444>] (tasklet_action+0x114/0x164)
    -----------------------------------------------------------------

    1.3) Assume the two DMA operations is X (first) and Y (second).

         The root cause of the bug:
   Assume process P issues DMA X, and sleep on the completion
 @this->dma_done. X's tasklet callback is dma_irq_callback. It firstly
 wake up the process sleeping on the completion @this->dma_done,
 and then trid to unmap the scatterlist S. The waked process P will
 issue Y in another ARM core. Y initializes S->sg_magic to zero
 with sg_init_one(), while dma_irq_callback is unmapping S at the same
 time.

 See the diagram:

                   ARM core 0              |         ARM core 1
 -------------------------------------------------------------
         (P issues DMA X, then sleep)  --> |
                                           |
         (X's tasklet wakes P)         --> |
                                           |
                                           | <-- (P begin to issue DMA Y)
                                           |
         (X's tasklet unmap the            |
      scatterlist S with dma_unmap_sg) --> | <-- (Y calls sg_init_one() to init
                                           |      scatterlist S)
                                           |

[2] This patch serialize both the X and Y in the following way:
     Unmap the DMA scatterlist S firstly, and wake up the process at the end
     of the DMA callback, in such a way, Y will be executed after X.

     After this patch:

                   ARM core 0              |         ARM core 1
 -------------------------------------------------------------
         (P issues DMA X, then sleep)  --> |
                                           |
         (X's tasklet unmap the            |
      scatterlist S with dma_unmap_sg) --> |
                                           |
         (X's tasklet wakes P)         --> |
                                           |
                                           | <-- (P begin to issue DMA Y)
                                           |
                                           | <-- (Y calls sg_init_one() to init
                                           |     scatterlist S)
                                           |

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: map: fixed bug in 64-bit systems

commit a4d62babf988fe5dfde24437fa135ef147bc7aa0 upstream.

Hardware:
CPU: XLP832,the 64-bit OS
NOR Flash:S29GL128S 128M
Software:
Kernel:2.6.32.41
Filesystem:JFFS2
When writing files, errors appear:
Write len 182  but return retlen 180
Write of 182 bytes at 0x072c815c failed. returned -5, retlen 180
Write len 186  but return retlen 184
Write of 186 bytes at 0x072caff4 failed. returned -5, retlen 184
These errors exist only in 64-bit systems,not in 32-bit systems. After analysis, we
found that the left shift operation is wrong in map_word_load_partial. For instance:
unsigned char buf[3] ={0x9e,0x3a,0xea};
map_bankwidth(map) is 4;
for (i=0; i < 3; i++) {
int bitpos;
bitpos = (map_bankwidth(map)-1-i)*8;
orig.x[0] &= ~(0xff << bitpos);
orig.x[0] |= buf[i] << bitpos;
}

The value of orig.x[0] is expected to be 0x9e3aeaff, but in this situation(64-bit
System) we'll get the wrong value of 0xffffffff9e3aeaff due to the 64-bit sign
extension:
buf[i] is defined as "unsigned char" and the left-shift operation will convert it
to the type of "signed int", so when left-shift buf[i] by 24 bits, the final result
will get the wrong value: 0xffffffff9e3aeaff.

If the left-shift bits are less than 24, then sign extension will not occur. Whereas
the bankwidth of the nor flash we used is 4, therefore this BUG emerges.

Signed-off-by: Pang Xunlei <pang.xunlei@zte.com.cn>
Signed-off-by: Zhang Yi <zhang.yi20@zte.com.cn>
Signed-off-by: Lu Zhongjun <lu.zhongjun@zte.com.cn>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: hack ONFI for non-power-of-2 dimensions

commit 4355b70cf48363c50a9de450b01178c83aba8f6a upstream.

Some bright specification writers decided to write this in the ONFI spec
(from ONFI 3.0, Section 3.1):

  "The number of blocks and number of pages per block is not required to
  be a power of two. In the case where one of these values is not a
  power of two, the corresponding address shall be rounded to an
  integral number of bits such that it addresses a range up to the
  subsequent power of two value. The host shall not access upper
  addresses in a range that is shown as not supported."

This breaks every assumption MTD makes about NAND block/chip-size
dimensions -- they *must* be a power of two!

And of course, an enterprising manufacturer has made use of this lovely
freedom. Exhibit A: Micron MT29F32G08CBADAWP

  "- Plane size: 2 planes x 1064 blocks per plane
   - Device size: 32Gb: 2128 blockss [sic]"

This quickly hits a BUG() in nand_base.c, since the extra dimensions
overflow so we think it's a second chip (on my single-chip setup):

    ONFI param page 0 valid
    ONFI flash detected
    NAND device: Manufacturer ID: 0x2c, Chip ID: 0x44 (Micron MT29F32G08CBADAWP), 4256MiB, page size: 8192, OOB size: 744
    ------------[ cut here ]------------
    kernel BUG at drivers/mtd/nand/nand_base.c:203!
    Internal error: Oops - BUG: 0 [#1] SMP ARM
    [... trim ...]
    [<c02cf3e4>] (nand_select_chip+0x18/0x2c) from [<c02d25c0>] (nand_do_read_ops+0x90/0x424)
    [<c02d25c0>] (nand_do_read_ops+0x90/0x424) from [<c02d2dd8>] (nand_read+0x54/0x78)
    [<c02d2dd8>] (nand_read+0x54/0x78) from [<c02ad2c8>] (mtd_read+0x84/0xbc)
    [<c02ad2c8>] (mtd_read+0x84/0xbc) from [<c02d4b28>] (scan_read.clone.4+0x4c/0x64)
    [<c02d4b28>] (scan_read.clone.4+0x4c/0x64) from [<c02d4c88>] (search_bbt+0x148/0x290)
    [<c02d4c88>] (search_bbt+0x148/0x290) from [<c02d4ea4>] (nand_scan_bbt+0xd4/0x5c0)
    [... trim ...]
    ---[ end trace 0c9363860d865ff2 ]---

So to fix this, just truncate these dimensions down to the greatest
power-of-2 dimension that is less than or equal to the specified
dimension.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: fix crash when using unassigned loop device

commit ef7e7c82e02b602f29c2b87f42dcd6143a6777da upstream.

When the loop module is loaded, it creates 8 loop devices /dev/loop[0-7].
The devices have no request routine and thus, when they are used without
being assigned, a crash happens.

For example, these commands cause crash (assuming there are no used loop
devices):

Kernel Fault: Code=26 regs=000000007f420980 (Addr=0000000000000010)
CPU: 1 PID: 50 Comm: kworker/1:1 Not tainted 3.11.0 #1
Workqueue: ksnaphd do_metadata [dm_snapshot]
task: 000000007fcf4078 ti: 000000007f420000 task.ti: 000000007f420000
[  116.319988]
     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001001111111100001111 Not tainted
r00-03  000000ff0804ff0f 00000000408bf5d0 00000000402d8204 000000007b7ff6c0
r04-07  00000000408a95d0 000000007f420950 000000007b7ff6c0 000000007d06c930
r08-11  000000007f4205c0 0000000000000001 000000007f4205c0 000000007f4204b8
r12-15  0000000000000010 0000000000000000 0000000000000000 0000000000000000
r16-19  000000001108dd48 000000004061cd7c 000000007d859800 000000000800000f
r20-23  0000000000000000 0000000000000008 0000000000000000 0000000000000000
r24-27  00000000ffffffff 000000007b7ff6c0 000000007d859800 00000000408a95d0
r28-31  0000000000000000 000000007f420950 000000007f420980 000000007f4208e8
sr00-03  0000000000000000 0000000000000000 0000000000000000 0000000000303000
sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  117.549988]
IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d82fc 00000000402d8300
 IIR: 53820020    ISR: 0000000000000000  IOR: 0000000000000010
 CPU:        1   CR30: 000000007f420000 CR31: ffffffffffffffff
 ORIG_R28: 0000000000000001
 IAOQ[0]: generic_make_request+0x11c/0x1a0
 IAOQ[1]: generic_make_request+0x120/0x1a0
 RP(r2): generic_make_request+0x24/0x1a0
Backtrace:
 [<00000000402d83f0>] submit_bio+0x70/0x140
 [<0000000011087c4c>] dispatch_io+0x234/0x478 [dm_mod]
 [<0000000011087f44>] sync_io+0xb4/0x190 [dm_mod]
 [<00000000110883bc>] dm_io+0x2c4/0x310 [dm_mod]
 [<00000000110bfcd0>] do_metadata+0x28/0xb0 [dm_snapshot]
 [<00000000401591d8>] process_one_work+0x160/0x460
 [<0000000040159bc0>] worker_thread+0x300/0x478
 [<0000000040161a70>] kthread+0x118/0x128
 [<0000000040104020>] end_fault_vector+0x20/0x28
 [<0000000040177220>] task_tick_fair+0x420/0x4d0
 [<00000000401aa048>] invoke_rcu_core+0x50/0x60
 [<00000000401ad5b8>] rcu_check_callbacks+0x210/0x8d8
 [<000000004014aaa0>] update_process_times+0xa8/0xc0
 [<00000000401ab86c>] rcu_process_callbacks+0x4b4/0x598
 [<0000000040142408>] __do_softirq+0x250/0x2c0
 [<00000000401789d0>] find_busiest_group+0x3c0/0xc70
[  119.379988]
Kernel panic - not syncing: Kernel Fault
Rebooting in 1 seconds..

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: fix crash if blk_alloc_queue fails

commit 3ec981e30fae1f3c8728a05c730acaa1f627bcfb upstream.

loop: fix crash if blk_alloc_queue fails

If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the
identifier allocated with idr_alloc. That causes crash on module unload in
idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to
remove non-existed device with that id.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000380
IP: [<ffffffff812057c9>] del_gendisk+0x19/0x2d0
PGD 43d399067 PUD 43d0ad067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but!
 ton unix
CPU: 7 PID: 2735 Comm: rmmod Tainted: G        W    3.10.15-devel #15
Hardware name: empty empty/S3992-E, BIOS 'V1.06   ' 06/09/2009
task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000
RIP: 0010:[<ffffffff812057c9>]  [<ffffffff812057c9>] del_gendisk+0x19/0x2d0
RSP: 0018:ffff88043d21fe10  EFLAGS: 00010282
RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000
RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff
R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800
FS:  00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800
 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60
 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec
Call Trace:
 [<ffffffff8100aba4>] ? native_sched_clock+0x24/0x80
 [<ffffffffa05102b4>] loop_remove+0x14/0x40 [loop]
 [<ffffffffa05102ec>] loop_exit_cb+0xc/0x10 [loop]
 [<ffffffff81217b74>] idr_for_each+0x104/0x190
 [<ffffffffa05102e0>] ? loop_remove+0x40/0x40 [loop]
 [<ffffffff8109adc5>] ? trace_hardirqs_on_caller+0x105/0x1d0
 [<ffffffffa05135dc>] loop_exit+0x34/0xa58 [loop]
 [<ffffffff810a98ea>] SyS_delete_module+0x13a/0x260
 [<ffffffff81221d5e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f
Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00
00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20
RIP  [<ffffffff812057c9>] del_gendisk+0x19/0x2d0
 RSP <ffff88043d21fe10>
CR2: 0000000000000380
---[ end trace 64ec069ec70f1309 ]---

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/srp: Report receive errors correctly

commit cd4e38542a5c2cab94e5410fb17c1cc004a60792 upstream.

The IB spec does not guarantee that the opcode is available in error
completions.  Hence do not rely on it.  See also commit 948d1e889e5b
("IB/srp: Introduce srp_handle_qp_err()").

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/qib: Fix txselect regression

commit 2fadd83184d58701f1116ca578465b5a75f9417c upstream.

Commit 7fac33014f54("IB/qib: checkpatch fixes") was overzealous in
removing a simple_strtoul for a parse routine, setup_txselect().  That
routine is required to handle a multi-value string.

Unwind that aspect of the fix.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/ipath: Convert ipath_user_sdma_pin_pages() to use get_user_pages_fast()

commit 4adcf7fb6783e354aab38824d803fa8c4f8e8a27 upstream.

ipath_user_sdma_queue_pkts() gets called with mmap_sem held for
writing.  Except for get_user_pages() deep down in
ipath_user_sdma_pin_pages() we don't seem to need mmap_sem at all.

Even more interestingly the function ipath_user_sdma_queue_pkts() (and
also ipath_user_sdma_coalesce() called somewhat later) call
copy_from_user() which can hit a page fault and we deadlock on trying
to get mmap_sem when handling that fault.  So just make
ipath_user_sdma_pin_pages() use get_user_pages_fast() and leave
mmap_sem locking for mm.

This deadlock has actually been observed in the wild when the node
is under memory pressure.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
[ Merged in fix for call to get_user_pages_fast from Tetsuo Handa
  <penguin-kernel@I-love.SAKURA.ne.jp>.  - Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: chap auth shouldn't match username with trailing garbage

commit 86784c6bdeeef78eed94d298be7a8879f6a97ee2 upstream.

In iSCSI negotiations with initiator CHAP enabled, usernames with
trailing garbage are permitted, because the string comparison only
checks the strlen of the configured username.

e.g. "usernameXXXXX" will be permitted to match "username".

Just check one more byte so the trailing null char is also matched.

Signed-off-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: fix extract_param to handle buffer length corner case

commit 369653e4fb511928511b0ce81f41c812ff1f28b6 upstream.

extract_param() is called with max_length set to the total size of the
output buffer.  It's not safe to allow a parameter length equal to the
buffer size as the terminating null would be written one byte past the
end of the output buffer.

Signed-off-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn

commit 5e8e6b4b3adebf01a9d97056cbbfd8c44330df99 upstream.

This patch fixes a >= v3.10 regression bug with mutex_trylock() usage
within iscsit_increment_maxcmdsn(), that was originally added to allow
for a special case where ->cmdsn_mutex was already held from the
iscsit_execute_cmd() exception path for ib_isert.

When !mutex_trylock() was occuring under contention during normal RX/TX
process context codepaths, the bug was manifesting itself as the following
protocol error:

  Received CmdSN: 0x000fcbb7 is greater than MaxCmdSN: 0x000fcbb6, protocol error.
  Received CmdSN: 0x000fcbb8 is greater than MaxCmdSN: 0x000fcbb6, protocol error.

This patch simply avoids the direct ib_isert callback in lio_queue_status()
for the special iscsi_execute_cmd() exception cases, that allows the problematic
mutex_trylock() usage in iscsit_increment_maxcmdsn() to go away.

Reported-by: Moussa Ba <moussaba@micron.com>
Tested-by: Moussa Ba <moussaba@micron.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: add Marvell 9230 to the AHCI PCI device list

commit 6d5278a68a75891db1df5ae1ecf83d288fc58c65 upstream.

Tested with a DAWICONTROL DC-624e on 3.10.10

Signed-off-by: Samir Benmendil <samir.benmendil@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: disabled FBS prior to issuing software reset

commit 89dafa20f3daab5b3e0c13d0068a28e8e64e2102 upstream.

Tested with Marvell 88se9125, attached with one port mulitplier(5 ports)
and one disk, we will get following boot log messages if using current
code:

  ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
  ata8.15: Port Multiplier 1.2, 0x1b4b:0x9715 r160, 5 ports, feat 0x1/0x1f
  ahci 0000:03:00.0: FBS is enabled
  ata8.00: hard resetting link
  ata8.00: SATA link down (SStatus 0 SControl 330)
  ata8.01: hard resetting link
  ata8.01: SATA link down (SStatus 0 SControl 330)
  ata8.02: hard resetting link
  ata8.02: SATA link down (SStatus 0 SControl 330)
  ata8.03: hard resetting link
  ata8.03: SATA link up 6.0 Gbps (SStatus 133 SControl 133)
  ata8.04: hard resetting link
  ata8.04: failed to resume link (SControl 133)
  ata8.04: failed to read SCR 0 (Emask=0x40)
  ata8.04: failed to read SCR 0 (Emask=0x40)
  ata8.04: failed to read SCR 1 (Emask=0x40)
  ata8.04: failed to read SCR 0 (Emask=0x40)
  ata8.03: native sectors (2) is smaller than sectors (976773168)
  ata8.03: ATA-8: ST3500413AS, JC4B, max UDMA/133
  ata8.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  ata8.03: configured for UDMA/133
  ata8.04: failed to IDENTIFY (I/O error, err_mask=0x100)
  ata8.15: hard resetting link
  ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
  ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
  ata8.15: PMP revalidation failed (errno=-19)
  ata8.15: hard resetting link
  ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
  ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
  ata8.15: PMP revalidation failed (errno=-19)
  ata8.15: limiting SATA link speed to 3.0 Gbps
  ata8.15: hard resetting link
  ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
  ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
  ata8.15: PMP revalidation failed (errno=-19)
  ata8.15: failed to recover PMP after 5 tries, giving up
  ata8.15: Port Multiplier detaching
  ata8.03: disabled
  ata8.00: disabled
  ata8: EH complete

The reason is that current detection code doesn't follow AHCI spec:

First,the port multiplier detection process look like this:

ahci_hardreset(link, class, deadline)
if (class == ATA_DEV_PMP) {
sata_pmp_attach(dev) /* will enable FBS */
sata_pmp_init_links(ap, nr_ports);
ata_for_each_link(link, ap, EDGE) {
sata_std_hardreset(link, class, deadline);
if (link_is_online) /* do soft reset */
ahci_softreset(link, class, deadline);
}
}
But, according to chapter 9.3.9 in AHCI spec: Prior to issuing software
reset, software shall clear PxCMD.ST to '0' and then clear PxFBS.EN to
'0'.

The patch test ok with kernel 3.11.1.

tj: Patch white space contaminated, applied manually with trivial
    updates.

Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ahci: Add Device IDs for Intel Wildcat Point-LP

commit 9f961a5f6efc87a79571d7166257b36af28ffcfe upstream.

This patch adds the AHCI-mode SATA Device IDs for the Intel Wildcat Point-LP PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc/sem.c: synchronize semop and semctl with IPC_RMID

commit 6e224f94597842c5eb17f1fc2208d20b6f7f7d49 upstream.

After acquiring the semlock spinlock, operations must test that the
array is still valid.

 - semctl() and exit_sem() would walk stale linked lists (ugly, but
   should be ok: all lists are empty)

 - semtimedop() would sleep forever - and if woken up due to a signal -
   access memory after free.

The patch also:
 - standardizes the tests for .deleted, so that all tests in one
   function leave the function with the same approach.
 - unconditionally tests for .deleted immediately after every call to
   sem_lock - even it it means that for semctl(GETALL), .deleted will be
   tested twice.

Both changes make the review simpler: After every sem_lock, there must
be a test of .deleted, followed by a goto to the cleanup code (if the
function uses "goto cleanup").

The only exception is semctl_down(): If sem_ids().rwsem is locked, then
the presence in ids->ipcs_idr is equivalent to !.deleted, thus no
additional test is required.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc: update locking scheme comments

commit 18ccee263c7e250a57f01c9434658f11f4118a64 upstream.

The initial documentation was a bit incomplete, update accordingly.

[akpm@linux-foundation.org: make it more readable in 80 columns]
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc, msg: forbid negative values for "msg{max,mnb,mni}"

commit 9bf76ca325d5e9208eb343f7bd4cc666f703ed30 upstream.

Negative message lengths make no sense -- so don't do negative queue
lenghts or identifier counts. Prevent them from getting negative.

Also change the underlying data types to be unsigned to avoid hairy
surprises with sign extensions in cases where those variables get
evaluated in unsigned expressions with bigger data types, e.g size_t.

In case a user still wants to have "unlimited" sizes she could just use
INT_MAX instead.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc, msg: fix message length check for negative values

commit 4e9b45a19241354daec281d7a785739829b52359 upstream.

On 64 bit systems the test for negative message sizes is bogus as the
size, which may be positive when evaluated as a long, will get truncated
to an int when passed to load_msg().  So a long might very well contain a
positive value but when truncated to an int it would become negative.

That in combination with a small negative value of msg_ctlmax (which will
be promoted to an unsigned type for the comparison against msgsz, making
it a big positive value and therefore make it pass the check) will lead to
two problems: 1/ The kmalloc() call in alloc_msg() will allocate a too
small buffer as the addition of alen is effectively a subtraction.  2/ The
copy_from_user() call in load_msg() will first overflow the buffer with
userland data and then, when the userland access generates an access
violation, the fixup handler copy_user_handle_tail() will try to fill the
remainder with zeros -- roughly 4GB.  That almost instantly results in a
system crash or reset.

  ,-[ Reproducer (needs to be run as root) ]--
  | #include <sys/stat.h>
  | #include <sys/msg.h>
  | #include <unistd.h>
  | #include <fcntl.h>
  |
  | int main(void) {
  |     long msg = 1;
  |     int fd;
  |
  |     fd = open("/proc/sys/kernel/msgmax", O_WRONLY);
  |     write(fd, "-1", 2);
  |     close(fd);
  |
  |     msgsnd(0, &msg, 0xfffffff0, IPC_NOWAIT);
  |
  |     return 0;
  | }
  '---

Fix the issue by preventing msgsz from getting truncated by consistently
using size_t for the message length.  This way the size checks in
do_msgsnd() could still be passed with a negative value for msg_ctlmax but
we would fail on the buffer allocation in that case and error out.

Also change the type of m_ts from int to size_t to avoid similar nastiness
in other code paths -- it is used in similar constructs, i.e.  signed vs.
unsigned checks.  It should never become negative under normal
circumstances, though.

Setting msg_ctlmax to a negative value is an odd configuration and should
be prevented.  As that might break existing userland, it will be handled
in a separate commit so it could easily be reverted and reworked without
reintroducing the above described bug.

Hardening mechanisms for user copy operations would have catched that bug
early -- e.g.  checking slab object sizes on user copy operations as the
usercopy feature of the PaX patch does.  Or, for that matter, detect the
long vs.  int sign change due to truncation, as the size overflow plugin
of the very same patch does.

[akpm@linux-foundation.org: fix i386 min() warnings]
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Pax Team <pageexec@freemail.hu>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192cu: Fix more pointer arithmetic errors

commit eafbdde9c5629bea58df07275c5917eb42afbbe7 upstream.

This driver uses a number of macros to get and set various fields in the
RX and TX descriptors. To work correctly, a u8 pointer to the descriptor
must be used; however, in some cases a descriptor structure pointer is used
instead. In addition, a duplicated statement is removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8192se: Fix wrong assignment

commit 3aef7dde8dcf09e0124f0a2665845a507331972b upstream.

There is a typo in the struct member name on assignment when checking
rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40, the check uses pwrgroup_ht40
for bound limit and uses pwrgroup_ht20 when assigning instead.

Signed-off-by: Felipe Pena <felipensp@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: Fix endian error in extracting packet type

commit 0c5d63f0ab6728f05ddefa25aff55e31297f95e6 upstream.

All of the rtlwifi drivers have an error in the routine that tests if
the data is "special". If it is, the subsequant transmission will be
at the lowest rate to enhance reliability. The 16-bit quantity is
big-endian, but was being extracted in native CPU mode. One of the
effects of this bug is to inhibit association under some conditions
as the TX rate is too high.

Based on suggestions by Joe Perches, the entire routine is rewritten.

One of the local headers contained duplicates of some of the ETH_P_XXX
definitions. These are deleted.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>