Kenneth Graunke [Fri, 21 Mar 2014 09:33:09 +0000 (02:33 -0700)]
i965: Print number of multisamples in INTEL_DEBUG=blorp output.
This lets us distinguish MSAA resolves from other ordinary blits.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Kenneth Graunke [Thu, 20 Mar 2014 21:41:43 +0000 (14:41 -0700)]
i965: Drop BLT TexSubImage Y-tiling restriction on Gen6+.
Currently, we don't use this path on Sandybridge because we suspect
other paths will be faster. But we potentially could. If we do, we
should allow it to support Y-tiled BLTs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Chris Forbes [Fri, 21 Mar 2014 10:00:58 +0000 (23:00 +1300)]
i965: Enable ARB_vertex_type_10f_11f_11f_rev for Gen4/5 also.
Tested on ILK and CTG (with the GL3isms taken out of the piglits).
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tom Stellard [Fri, 21 Mar 2014 18:08:26 +0000 (11:08 -0700)]
clover: Fix typo in validate_object()
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Roland Scheidegger [Thu, 20 Mar 2014 15:43:36 +0000 (16:43 +0100)]
llvmpipe: add support for b5g6r5_srgb
The conversion code for srgb was tuned for n x 4x8bit AoS -> 4 x nxfloat SoA
(and vice versa), fix this to handle also 16bit 565-style srgb formats.
Still not really all that generic, things like r10g10b10a2_srgb or
r4g4b4a4_srgb wouldn't work (the latter trivial to fix, the former would not
require more work to not crash but near certainly need some higher precision
calculation) but not needed right now.
The code is not fully optimized for this (could use more direct calculation
instead of expanding to 8-bit range first) but should be good enough.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Roland Scheidegger [Thu, 20 Mar 2014 15:27:57 +0000 (16:27 +0100)]
gallium: add b5g6r5 srgb format
GL generally doesn't seem to allow srgb formats with less (or more) than 8 bit
for the rgb channels, though some hw could easily do it (typically for formats
with up to 10 bits for the rgb channels, at least for formats with less than 8
bits support is likely widespread even). While it may be true there aren't
really any benefits for such formats, we need for it for d3d, though luckily
only for b5g6r5_srgb it seems.
So add this format along with the util code for conversion - since that util
code is heavily tuned for 8bit srgb this isn't really all that well optimized
and rounding doesn't seem right but at least it should give some halfway
meaningful results.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Ilia Mirkin [Thu, 20 Mar 2014 21:37:00 +0000 (17:37 -0400)]
nvc0/ir: move sample id to second source arg to fix sampler2DMS
The nvc0 texfetch instruction expects the sample id to be in the second
source (usually used for the offset) rather than as part of the texture
coordinate.
This fixes all the sampler2DMS/Array tests on nvc0.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Marek Olšák [Mon, 10 Mar 2014 15:27:21 +0000 (16:27 +0100)]
st/mesa: drop the lowering of quad strips to triangle strips
This fallback to triangle strips is silly and should be done in drivers
if they need it.
This should fix the case when quad strips are used with flatshading that is
enabled by the "flat" GLSL varying modifier. It also fixes primitive restart
for quad strips.
This fixes piglit:
NV_primitive_restart/primitive-restart-draw-mode-quad_strip
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Marek Olšák [Wed, 12 Mar 2014 01:18:06 +0000 (02:18 +0100)]
gallium/u_gen_mipmap: remove the software fallback
The last changes to it are from 2008 and 2009.
It doesn't support most texture formats and some texture targets.
Nobody can possibly be using this.
Reviewed-by: Brian Paul <brianp@vmware.com>
Marek Olšák [Tue, 11 Mar 2014 13:52:39 +0000 (14:52 +0100)]
st/mesa: fix generating mipmaps for cube arrays
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Marek Olšák [Wed, 12 Mar 2014 01:04:03 +0000 (02:04 +0100)]
mesa: fix software fallback for generating mipmaps for 3D textures
It didn't use the driver-provided src/dstRowStride at all.
This was broken for the cases when stride != width*bpp.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Marek Olšák [Tue, 11 Mar 2014 14:04:33 +0000 (15:04 +0100)]
mesa: fix software fallback for generating mipmaps for cube arrays
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Marek Olšák [Tue, 11 Mar 2014 14:04:00 +0000 (15:04 +0100)]
mesa: allow generating mipmaps for cube arrays
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Marek Olšák [Tue, 11 Mar 2014 14:02:39 +0000 (15:02 +0100)]
mesa: fix texture border handling for cube arrays
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>
Marek Olšák [Mon, 17 Mar 2014 00:19:51 +0000 (01:19 +0100)]
r600g: use more appropriate names for async DMA functions
*_dma_copy calls either *_dma_copy_buffer or *_dma_copy_tile.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Marek Olšák [Mon, 17 Mar 2014 00:18:43 +0000 (01:18 +0100)]
r600g: deobfuscate async DMA code
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Marek Olšák [Sun, 16 Mar 2014 18:59:50 +0000 (19:59 +0100)]
r600g: don't flush the gfx IB explicitly before doing DMA
It's flushed by calling r600_context_bo_reloc.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Marek Olšák [Sun, 16 Mar 2014 16:17:58 +0000 (17:17 +0100)]
winsys/radeon: only add duplicate relocations for DMA if VM isn't supported
Also rewrite the comment for it to be readable and reorder the code.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Niels Ole Salscheider [Mon, 17 Mar 2014 17:48:06 +0000 (18:48 +0100)]
radeonsi: Implement DMA blit
This code is a slightly modified version of evergreen_dma_blit (and
evergreen_dma_copy as well as evergreen_dma_copy_tile).
It would be nice to share some of the code in the long term.
I have reused some "cik"-prefixed functions that also return the right
value for SI. I am not sure if they should be renamed.
v2: Marek> removed gfx.flush in si_dma_copy_tile
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Niels Ole Salscheider [Mon, 17 Mar 2014 17:48:05 +0000 (18:48 +0100)]
radeon: Move r600_need_dma_space to common code
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Richard Sandiford [Wed, 19 Mar 2014 17:12:38 +0000 (17:12 +0000)]
llvmpipe: Tighten check for alpha-only formats
The AoS version of ld_build_blend_factor was assuming that if the first
channel was alpha, there were no rgb components.
Fixes glean/blendFunc on System z. No piglit regressions on x86_64.
The shortcut is still used in tests like spec/ARB_framebuffer_object/
fbo-alpha.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Jonathan Gray [Thu, 20 Mar 2014 03:43:29 +0000 (14:43 +1100)]
nouveau: don't assume libdrm include prefix
drm headers may be installed in a different directory
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Jonathan Gray [Thu, 20 Mar 2014 03:45:04 +0000 (14:45 +1100)]
nouveau: use DLOPEN_LIBS instead of -ldl
libdl does not exist on many platforms which have dlopen in libc.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Brian Paul [Tue, 18 Mar 2014 23:25:07 +0000 (17:25 -0600)]
c11/threads: don't include assert.h if the assert macro is already defined
In the gallium code, the assert() macro could come from either the
system's assert.h file (via c11/threads.h) or from gallium's u_debug.h.
It looks like all known assert.h files unconditionally #undef assert
before defining their own version. So the assert you get depends on
whether threads.h or u_debug.h was included last.
In the gallium code we really want to use the assert() from u_debug.h
(it behaves better on Windows). In gallium, c11/threads.h is only
included after u_debug.h in the os_thread.h wrapper. So Adding
an #ifndef assert test in the threads*.h files avoids using the system's
assert().
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Ilia Mirkin [Mon, 17 Mar 2014 14:37:12 +0000 (10:37 -0400)]
nouveau: there may not have been a texture if the fbo was incomplete
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Ilia Mirkin [Thu, 13 Mar 2014 14:36:25 +0000 (10:36 -0400)]
nouveau: add forgotten GL_COMPRESSED_INTENSITY to texture format list
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Ilia Mirkin [Thu, 13 Mar 2014 11:01:15 +0000 (07:01 -0400)]
mesa/main: condition GL_DEPTH_STENCIL on ARB_depth_texture
EXT_packed_depth_stencil is supported by all drivers, but
ARB_depth_texture isn't (notably nouveau_vieux). This should avoid
passing unexpected values down to ChooseTextureFormat.
The EXT_packed_depth_stencil spec does not make any explicit references
to requiring ARB_depth_texture in order to allow textures with that
format, however if there is no dependency, ARB_depth_texture would be
practically implied by the extension.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
Note for 10.0 backport: This will produce a conflict, the solution is to
move the surrounding if as well.
Ilia Mirkin [Mon, 17 Mar 2014 18:42:12 +0000 (14:42 -0400)]
loader: add special logic to distinguish nouveau from nouveau_vieux
There are a lot of different pci ids supported by nouveau, and more are
added all the time. The relevant distinguisher between drivers is the
chipset id.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Matt Turner [Sun, 2 Mar 2014 18:34:45 +0000 (10:34 -0800)]
glsl: Allow dot() on scalars, and throw out dotlike().
In all uses of dotlike() we're writing generic code that operates on 1-4
component vectors. That our IR requires ir_binop_dot expressions'
operands to be 2+ component vectors is an implementation detail that's
not important when implementing built-in functions with dot(), which is
defined for scalar floats in GLSL.
Reviewed-by: Eric Anholt <eric@anholt.net>
Matt Turner [Fri, 28 Feb 2014 21:33:19 +0000 (13:33 -0800)]
glsl: Optimize pow(x, 2) into x * x.
Cuts two instructions out of SynMark's Gl32VSInstancing benchmark.
Reviewed-by: Eric Anholt <eric@anholt.net>
Matt Turner [Tue, 18 Mar 2014 22:40:49 +0000 (15:40 -0700)]
glsl: Match whitespace changes from previous patch.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Matt Turner [Tue, 11 Mar 2014 19:36:04 +0000 (12:36 -0700)]
glsl: Expose pack/unpack built-ins for ARB_gpu_shader5.
ARB_gpu_shader5 and ES 3.0 expose different subsets of
ARB_shading_language_packing.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Eric Anholt [Thu, 13 Mar 2014 23:53:09 +0000 (16:53 -0700)]
i965: Drop some more dead code from the old CACHED_BATCH feature.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Eric Anholt [Wed, 5 Mar 2014 01:26:54 +0000 (17:26 -0800)]
i965: Drop special case for edgeflag thanks to Marek's change to core.
As of
780ce576bb1781f027797039693b98253ee4813e, we end up with R8_SSCALED
anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Brian Paul [Tue, 18 Mar 2014 17:55:50 +0000 (11:55 -0600)]
mesa: include stdbool.h in register_allocate.h to fix build
https://bugs.freedesktop.org/show_bug.cgi?id=76331
Ian Romanick [Tue, 4 Mar 2014 09:08:05 +0000 (11:08 +0200)]
i965: Enable EWA anisotropic filtering algorithm
Volume 4, part 1 of the Ivybridge PRM says, "Generally, the EWA
approximation algorithm results in higher image quality than the legacy
algorithm." Using a classic anisotropic filtering "tunnel" demo, it
appears that there is *no* anisotropic filtering on IVB without this bit
set.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Tue, 18 Mar 2014 17:49:10 +0000 (10:49 -0700)]
i965: Actually initialize simd16_unsupported and no16_msg.
I meant to include this fixes in v3 of commit
de7ad2c88f4ec243c95eaed22c41d0e537912e01, but accidentally pushed a
previous version.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Kenneth Graunke [Mon, 3 Mar 2014 07:09:20 +0000 (23:09 -0800)]
i965/upload: Refactor open-coded ALIGN-like computations.
Sadly, we can't use actual ALIGN(), since that only supports
power-of-two values for the alignment parameter.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Mon, 3 Mar 2014 00:39:56 +0000 (16:39 -0800)]
i965: Fix indentation in brw_upload_indices().
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Sun, 2 Mar 2014 23:02:54 +0000 (15:02 -0800)]
i965: Consolidate code for setting brw->ib.start_vertex_offset.
This was set identically in three places.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Kenneth Graunke [Mon, 17 Mar 2014 20:53:44 +0000 (13:53 -0700)]
i965: Allocate register sets at screen creation, not context creation.
Register sets depend on the particular hardware generation, but don't
depend on anything in the actual OpenGL context. Computing them is
fairly expensive, and they take up a large amount of memory. Putting
them in the screen allows us to compute/allocate them once for all
contexts, saving both time and space.
Improves the performance of a context creation/destruction
microbenchmark by about 3x on my Haswell i7-4750HQ.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Mon, 17 Mar 2014 20:57:14 +0000 (13:57 -0700)]
i965: Allocate the screen using ralloc rather than calloc.
This will allow us to use the screen as a memory context.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Mon, 17 Mar 2014 21:53:08 +0000 (14:53 -0700)]
ra: Convert another bool array to bitsets.
This one saves about 2MB peak allocation in glsl-fs-algebraic-add-add-1,
with no performance difference on timing short shader-db runs (n=9/10,
warmup outlier removed).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Kenneth Graunke [Sat, 22 Feb 2014 03:50:15 +0000 (19:50 -0800)]
ra: Use a bitset for storing which registers belong to a class.
This should use 1/8 the memory.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Christoph Brill <egore911@gmail.com>
Kenneth Graunke [Sat, 22 Feb 2014 03:31:44 +0000 (19:31 -0800)]
ra: Create a reg_belongs_to_class() helper function.
This is a little easier to read.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Christoph Brill <egore911@gmail.com>
Kenneth Graunke [Sat, 22 Feb 2014 03:32:24 +0000 (19:32 -0800)]
ra: Use bool instead of GLboolean.
This isn't the GL API, so there's no reason to use GLboolean.
Using bool is safer: any non-zero value is treated as "true". When
converting a value to a GLboolean, all but the low byte is discarded,
which means that values like 256 will be incorrectly rendered as false.
Done via the following vim commands:
:%s/GLboolean/bool/g
:%s/GL_TRUE/true/g
:%s/GL_FALSE/false/g
and one line of manual whitespace tidying.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Kenneth Graunke [Fri, 7 Mar 2014 08:49:45 +0000 (00:49 -0800)]
i965: Accurately bail on SIMD16 compiles.
Ideally, we'd like to never even attempt the SIMD16 compile if we could
know ahead of time that it won't succeed---it's purely a waste of time.
This is especially important for state-based recompiles, which happen at
draw time.
The fragment shader compiler has a number of checks like:
if (dispatch_width == 16)
fail("...some reason...");
This patch introduces a new no16() function which replaces the above
pattern. In the SIMD8 compile, it sets a "SIMD16 will never work" flag.
Then, brw_wm_fs_emit can check that flag, skip the SIMD16 compile, and
issue a helpful performance warning if INTEL_DEBUG=perf is set. (In
SIMD16 mode, no16() calls fail(), for safety's sake.)
The great part is that this is not a heuristic---if the flag is set, we
know with 100% certainty that the SIMD16 compile would fail. (It might
fail anyway if we run out of registers, but it's always worth trying.)
v2: Fix missing va_end in early-return case (caught by Ilia Mirkin).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz> [v1]
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> [v1]
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Sat, 8 Mar 2014 00:10:50 +0000 (16:10 -0800)]
i965/fs: Support pull parameters in SIMD16 mode.
This is just a matter of reusing the pull/push constant information set
up by the SIMD8 compile.
This gains us 78 SIMD16 programs in shader-db.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Wed, 12 Mar 2014 05:24:39 +0000 (22:24 -0700)]
i965/fs: Use a single instance of the pull_constant_loc[] array.
Now that we don't renumber uniform registers, assign_constant_locations
and move_uniform_array_access_to_pull_constants use the same names.
So, they can share a single copy of the pull_constant_loc[] array.
This simplifies the code considerably. assign_constant_locations()
doesn't need to walk through pull_params[] to rediscover reladdr
demotions; it just has that information in pull_constant_loc[]. We also
only need to rewrite the instruction stream once, instead of twice.
Even better, we now have a single array describing the layout of
all pull parameters, which we can pass to the SIMD16 program.
This actually hurts a few shaders in Serious Sam 3, and one in KWin:
total instructions in shared programs: 1841957 -> 1842035 (0.00%)
instructions in affected programs: 1165 -> 1243 (6.70%)
Comparing dump_instructions() before and after the pull constant
transformations with and without this patch, it appears that there is
a uniform array with variable indexing (reladdr) and constant indexing
(of array element 0). Previously, we uploaded array element 0 as both
a pull constant (for reladdr) /and/ a push constant.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Tue, 11 Mar 2014 21:35:27 +0000 (14:35 -0700)]
i965/fs: Don't renumber UNIFORM registers.
Previously, remove_dead_constants() would renumber the UNIFORM registers
to be sequential starting from zero, and the resulting register number
would be used directly as an index into the params[] array.
This renumbering made it difficult to collect and save information about
pull constant locations, since setup_pull_constants() and
move_uniform_array_access_to_pull_constants() used different names.
This patch generalizes setup_pull_constants() to decide whether each
uniform register should be a pull constant, push constant, or neither
(because it's unused). Then, it stores mappings from UNIFORM register
numbers to params[] or pull_params[] indices in the push_constant_loc
and pull_constant_loc arrays. (We already did this for pull constants.)
Then, assign_curb_setup() just needs to consult the push_constant_loc
array to get the real index into the params[] array.
This effectively folds all the remove_dead_constants() functionality
into assign_constant_locations(), while being less irritable to work
with.
v2: Add assert(remapped <= i), requested by Topi.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Mon, 10 Mar 2014 20:14:03 +0000 (13:14 -0700)]
i965/fs: Split pull parameter decision making from mechanical demoting.
move_uniform_array_access_to_pull_constants() and setup_pull_constants()
both have two parts:
1. Decide which UNIFORM registers to demote to pull constants, and
assign locations.
2. Mechanically rewrite the instruction stream to pull the uniform
value into a temporary VGRF and use that, eliminating the UNIFORM
file access.
In order to support pull constants in SIMD16 mode, we will need to make
decisions exactly once, but rewrite both instruction streams.
Separating these two tasks will make this easier.
This patch introduces a new helper, demote_pull_constants(), which
takes care of rewriting the instruction stream, in both cases.
For the moment, a single invocation of demote_pull_constants can't
safely handle both reladdr and non-reladdr tasks, since the two callers
still use different names for uniforms due to remove_dead_constants()
remapping of things. So, we get an ugly boolean parameter saying
which to do. This will go away.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Fri, 7 Mar 2014 23:45:13 +0000 (15:45 -0800)]
i965/fs: Record pull constant locations for all array elements.
When demoting a variably indexed uniform array to pull constants, we
only recorded the location for the base of the array (element 0).
Recording locations for all array elements is a trivial amount of code
and will make subsequent refactoring easier.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Fri, 7 Mar 2014 10:10:14 +0000 (02:10 -0800)]
i965/fs: Save push constant location information.
Previously, both move_uniform_array_access_to_pull_constants() and
setup_pull_constants() maintained stack-local arrays with this
information. Storing this information will allow it to be used from
multiple functions, allowing us to split and move code around.
We'll also eventually want to pass pull constant location information
to the SIMD16 compile. Saving this information will help us do that.
Unfortunately, the two functions *cannot* share the contents of the
array just yet. remove_dead_constants() renumbers all the UNIFORM
registers to be contiguous starting at zero, so the two functions
talk about uniforms using different names. We can't even remap them,
since move_uniform_array_access_to_pull_constants() deletes UNIFORM
registers that are only accessed with reladdr, so remove_dead_constants
can't even see them.
This situation will improve in the next few patches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Kenneth Graunke [Tue, 11 Mar 2014 06:22:48 +0000 (23:22 -0700)]
i965/fs: Delete dead code to fail compiles with SIMD16 pull parameters.
The SIMD8 compile will determine whether pull parameters are necessary.
If so, it will set prog_data->nr_pull_params to a value greater than 0.
brw_wm_fs_emit checks if nr_pull_params > 0 and skips the SIMD16 compile
altogether. So, this code should never occur.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Brian Paul [Mon, 17 Mar 2014 21:13:55 +0000 (15:13 -0600)]
gallium/docs: update SLT, SGE, SFL, STR opcode docs
To emphasize that the result is floating point 1.0 or 0.0, to match
other opcodes like SLE and SEQ.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Charmaine Lee [Thu, 13 Mar 2014 17:33:00 +0000 (11:33 -0600)]
glx: Fix incorrect pdp assignment in dri2_bind_context().
pdp should be set to dpyPriv->dri2Display.
Fixes blank frame failure running glretrace ClearView.
Reviewed-by: Brian Paul <brianp@vmware.com>
Maarten Lankhorst [Tue, 18 Mar 2014 13:47:40 +0000 (14:47 +0100)]
nvc0: Handle user mapped vertex buffer for edgeflag
Handle mapping edgeflag data similar to the code around it.
This fixes a crash in piglit test gl-2.0-edgeflag.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Francisco Jerez [Fri, 14 Mar 2014 10:31:11 +0000 (11:31 +0100)]
clover: Fix region size error checking in some buffer transfer commands.
Tested-by: Tom Stellard <thomas.stellard@amd.com>
Ilia Mirkin [Sat, 15 Mar 2014 16:42:51 +0000 (12:42 -0400)]
nv50/ir/gk110: add postfactor support for fmul
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Sat, 15 Mar 2014 14:22:22 +0000 (10:22 -0400)]
nv50/ir/gk110: set not modifier on first source of logic op
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Fri, 14 Mar 2014 12:16:00 +0000 (08:16 -0400)]
nv50/ir/gk110: use shl/shr instead of lshf/rshf so that c[] is supported
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Fri, 14 Mar 2014 10:20:36 +0000 (06:20 -0400)]
nv50/ir/gk110: add 64/128-bit fetch/export support
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Fri, 14 Mar 2014 10:11:37 +0000 (06:11 -0400)]
nv50/ir/gk110: fix handling of OP_SUB for floating point ops
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Fri, 14 Mar 2014 09:46:14 +0000 (05:46 -0400)]
nv50/ir/gk110: presin/preex2 take their source at bit 23
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Wed, 12 Mar 2014 16:00:58 +0000 (12:00 -0400)]
nv50/ir/gk110: add implementations of div u32/s32
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Wed, 12 Mar 2014 13:33:00 +0000 (09:33 -0400)]
nv50/ir/gk110: implement quadop
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 18:54:25 +0000 (14:54 -0400)]
nv50/ir/gk110: fill in mov from predicate
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 17:03:02 +0000 (13:03 -0400)]
nv50/ir/gk110: handle derivAll flag, fix useOffsets for non-txf
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 16:13:45 +0000 (12:13 -0400)]
nv50/ir/gk110: fix setting texture for txd/txf/txq
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 15:21:35 +0000 (11:21 -0400)]
nv50/ir/gk110: add texcsaa implementation
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 14:48:15 +0000 (10:48 -0400)]
nv50/ir/gk110: add pfetch support
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 14:25:29 +0000 (10:25 -0400)]
nv50/ir/gk110: add emit/restart implementations
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 13:38:38 +0000 (09:38 -0400)]
nv50/ir/gk110: add missing break in sched emit
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 12:30:49 +0000 (08:30 -0400)]
nv50/ir/gk110: implement partial txq support
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 12:30:01 +0000 (08:30 -0400)]
nv50/ir/gk110: fill out texture instruction support
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Ilia Mirkin [Tue, 11 Mar 2014 09:44:00 +0000 (05:44 -0400)]
nv50/ir/gk110: fix control flow opcode emission, add sat flag
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Chad Versace [Thu, 23 Jan 2014 15:26:10 +0000 (07:26 -0800)]
egl/main: Enable Linux platform extensions
Enable EGL_EXT_platform_base and the Linux platform extensions layered
atop it: EGL_EXT_platform_x11, EGL_EXT_platform_wayland,
and EGL_MESA_platform_gbm.
Tested with Piglit's EGL_EXT_platform_base tests under an X11 session.
To enable running the Wayland and GBM tests, windowed Weston was running
and the kernel had render nodes enabled.
I regression tested my EGL_EXT_platform_base patch set with Piglit on
Ivybridge under X11/EGL, standalone Weston, and GBM with rendernodes. No
regressions found.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Sun, 9 Feb 2014 17:13:27 +0000 (09:13 -0800)]
egl/wayland: Emit EGL_BAD_PARAMETER for eglCreatePlatformPixmapSurface
From the EGL_EXT_wayland_spec, version 3:
It is not valid to call eglCreatePlatformPixmapSurfaceEXT with a <dpy>
that belongs to Wayland. Any such call fails and generates
EGL_BAD_PARAMETER.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Sun, 9 Feb 2014 17:13:08 +0000 (09:13 -0800)]
egl/gbm: Emit EGL_BAD_PARAMETER for eglCreatePlatformPixmapSurface
From the EGL_MESA_platform_gbm spec, version 5:
It is not valid to call eglCreatePlatformPixmapSurfaceEXT with a <dpy>
that belongs to the GBM platform. Any such call fails and generates
EGL_BAD_PARAMETER.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Tue, 7 Jan 2014 22:54:51 +0000 (14:54 -0800)]
egl/main: Stop using EGLNative types internally
Internally, much of the EGL code uses EGLNativeDisplayType,
EGLNativeWindowType, and EGLPixmapType. However, the EGLNative type
often does not match the variable's actual type.
The concept of EGLNative types are a bad match for Linux, as explained
below. And the EGL platform extensions don't use EGLNative types at all.
Those extensions attempt to solve cross-platform issues by moving the
EGL API away from the EGLNative types.
The core of the problem is that eglplatform.h can define each EGLNative
type once only, but Linux supports multiple EGL platforms.
To work around the problem, Mesa's eglplatform.h contains multiple
definitions of each EGLNative type, selected by feature macros. Mesa
expects EGL clients to set the feature macro approrpiately. But the
feature macros don't work when a single codebase must be built with
support for multiple EGL platforms, *such as Mesa itself*.
When building libEGL, autotools chooses the EGLNative typedefs based on
the first element of '--with-egl-platforms'. For example,
'--with-egl-platforms=x11,drm,wayland' defines the following:
typedef Display* EGLNativeDisplayType;
typedef Window EGLNativeWindowType;
typedef Pixmap EGLNativePixmapType;
Clearly, this doesn't work well for Wayland and GBM. Mesa works around
the problem by casting the EGLNative types to different things in
different files.
For sanity's sake, and to prepare for the EGL platform extensions, this
patch removes from egl/main and egl/dri2 all internal use of the
EGLNative types. It replaces them with 'void*' and checks each explicit
cast with a static assertion. Also, the patch touches egl_gallium the
minimal amount to keep it compatible with eglapi.h.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Tue, 7 Jan 2014 22:23:49 +0000 (14:23 -0800)]
egl: Add STATIC_ASSERT() macro
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 01:03:03 +0000 (17:03 -0800)]
egl/dri2: Dispatch eglCreateImageKHR by display, not driver
Add dri2_egl_display_vtbl::create_image, set it for each platform, and
let egl_dri2 dispatch eglCreateImageKHR to that.
To remove ambiguity, rename egl_dri2.c:dri2_create_image() to
dri2_create_image_from_dri().
This prepares for the EGL platform extensions.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 03:38:39 +0000 (19:38 -0800)]
egl/dri2/x11: Don't clobber _EGLDriver::API
dri2_initialize_x11_swrast() does a strange thing. For some extensions
it doesn't support, it sets the corresponding functions in
_EGLDriver::API to NULL. The intention here is clear, but misplaced.
NULL or not, the function pointers never get called because their
extensions aren't supported.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 01:03:03 +0000 (17:03 -0800)]
egl/dri2: Dispatch eglCreateWaylandBufferFromImageWL by display, not driver
Add dri2_egl_display_vtbl::create_wayland_buffer_from_image, set it for
each platform, and let egl_dri2 dispatch
eglCreateWaylandBufferFromImageWL to that.
This prepares for the EGL platform extensions.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 02:53:56 +0000 (18:53 -0800)]
egl/dri2: Consolidate eglTerminate
egl_dri2.c:dri2_terminate() handled terminating X11 and DRM displays.
The Wayland platform implemented its own dri2_wl_terminate(), which was
nearly a copy of the common one.
To implement the EGL platform extensions, we either need to dispatch
eglTerminate per display or define a common implementation for all
platforms. This patch chooses consolidation. It removes
dri2_wl_terminate() by folding it into the common dri2_terminate().
It was necessary to invert the `if (disp->PlatformDisplay == NULL)` and
the switch statement because, unlike DRM and X11, Wayland's terminator
performed action even when EGL didn't own the native display. In the
inversion, I replaced `disp->PlatformDisplay == NULL` with
`dri2_dpy->own_device` because the two expressions are synonymous, but
the latter's meaning is clearer.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 02:52:00 +0000 (18:52 -0800)]
egl/dri2/x11: Set dri2_dpy->own_device
When the user calls eglGetDisplay(EGL_DEFAULT_DISPLAY), the Wayland and
DRM platforms set dri2_dpy->own_device=true. This patch makes the X11
platform do the same for consistency.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 01:03:03 +0000 (17:03 -0800)]
egl/dri2: Dispatch eglPostSubBufferNV by display, not driver
Add dri2_egl_display_vtbl::post_sub_buffer, set it for each
platform, and let egl_dri2 dispatch eglPostSubBufferNV to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 01:03:03 +0000 (17:03 -0800)]
egl/dri2: Dispatch eglSwapBuffersRegionNOK by display, not driver
Add dri2_egl_display_vtbl::swap_buffers_region, set it for each
platform, and let egl_dri2 dispatch eglSwapBuffersRegionNOK to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 01:03:03 +0000 (17:03 -0800)]
egl/dri2: Dispatch eglCopyBuffers by display, not driver
Add dri2_egl_display_vtbl::copy_buffers, set it for each
platform, and let egl_dri2 dispatch eglCopyBuffers to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 01:03:03 +0000 (17:03 -0800)]
egl/dri2: Dispatch API.QueryBufferAge by display, not driver
Add dri2_egl_display_vtbl::query_buffer_age, set it for each
platform, and let egl_dri2 dispatch API.QueryBufferAge to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 01:03:03 +0000 (17:03 -0800)]
egl/dri2: Dispatch eglDestroySurface by display, not driver
Add dri2_egl_display_vtbl::destroy_surface, set it for each
platform, and let egl_dri2 dispatch eglDestroySurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 01:03:03 +0000 (17:03 -0800)]
egl/dri2: Dispatch eglCreatePbufferSurface by display, not driver
Add dri2_egl_display_vtbl::create_pbuffer_surface, set it for each
platform, and let egl_dri2 dispatch eglCreatePbufferSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 00:45:07 +0000 (16:45 -0800)]
egl/dri2: Dispatch eglCreatePixmapSurface by display, not driver
Add dri2_egl_display_vtbl::create_pbuffer_surface, set it for each
platform, and let egl_dri2 dispatch eglCreatePixmapSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 00:39:09 +0000 (16:39 -0800)]
egl/dri2: Dispatch eglCreateWindowSurface by display, not driver
Add dri2_egl_display_vtbl::create_window_surface, set it for each
platform, and let egl_dri2 dispatch eglCreateWindowSurface to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 00:26:44 +0000 (16:26 -0800)]
egl/dri2: Dispatch eglSwapBuffersWithDamage by display, not driver
Add dri2_egl_display_vtbl::swap_buffers_with_damage, set it for each
platform, and let egl_dri2 dispatch eglSwapBuffersWithDamageEXT to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Wed, 29 Jan 2014 00:21:21 +0000 (16:21 -0800)]
egl/dri2: Dispatch eglSwapBuffers by display, not driver
Add dri2_egl_display_vtbl::swap_buffers, set it for each platform, and
let egl_dri2 dispatch eglSwapBuffers to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Tue, 28 Jan 2014 20:34:19 +0000 (12:34 -0800)]
egl/dri2: Dispatch eglSwapInterval by display, not driver
Add dri2_egl_display_vtbl::swap_interval, set it for each platform, and
let egl_dri2 dispatch eglSwapInterval to that.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Tue, 28 Jan 2014 00:42:10 +0000 (16:42 -0800)]
egl/wl,x11: Call dri2_swap_interval() statically
Don't call it through the driver dispatch table. Just call it
statically.
This prepares for the EGL platform extensions.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Tue, 28 Jan 2014 20:47:38 +0000 (12:47 -0800)]
egl/dri2: Put platform func names into proper namespaces
Each of the egl_dri2 platforms (except Android) prefix their function
names with "dri2", not "dri2_${platform}". This means many function
names have three separate definitions in the egl_dri2 directory: one in
each of platform_drm.c, platform_wayland.c, and platform_x11.c. For
example, each of the three files defines dri2_create_window_surface().
The name collisions make it difficult to review patches for correctness
("Is this patch hunk calling a platform_x11 function or a global
egl_dri2 function?"), complicate debugging, and confuse code navigation
tools.
For each function in platform_x11.c prefixed with 'dri2', this patch
changes its prefix to 'dri2_x11'. Likewise for platform_drm.c and
'dri2_drm'; and platform_wayland.c and 'dri2_wl'.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Chad Versace [Tue, 28 Jan 2014 19:41:46 +0000 (11:41 -0800)]
egl/dri2: Move dri2_egl_display virtual funcs to vtbl
dri2_egl_display has only one virtual function, 'authenticate'. Define
dri2_egl_display::vtbl and move 'authenticate' there.
This prepares for the EGL platform extensions, which will add many
more virtual functions to dri2_egl_display.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>