review.tizen.org Git - platform/kernel/linux-rpi.git/log

Input: dlink-dir685-touchkeys - fix a typo in driver name

[ Upstream commit 38347374ae3f1ec4df56dd688bd603a64e79a0ed ]

According to the file name and Kconfig, a 'k' is missing in this driver
name. It should be "dlink-dir685-touchkeys".

Fixes: 131b3de7016b ("Input: add D-Link DIR-685 touchkeys driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200412213937.5287-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - add custom init packet for Xbox One S controllers

[ Upstream commit 764f7f911bf72450c51eb74cbb262ad9933741d8 ]

Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers
fixes an issue where controller is stuck in Bluetooth mode and not sending
any inputs.

Signed-off-by: Łukasz Patron <priv.luk@gmail.com>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: evdev - call input_flush_device() on release(), not flush()

[ Upstream commit 09264098ff153f60866039d60b31d39b66f55a31 ]

input_flush_device() should only be called once the struct file is being
released and no open descriptors remain, but evdev_flush() was calling
it whenever a file descriptor was closed.

This caused uploaded force-feedback effects to be erased when a process
did a dup()/close() on the event FD, called system(), etc.

Call input_flush_device() from evdev_release() instead.

Reported-by: Mathieu Maret <mathieu.maret@gmail.com>
Signed-off-by: Brendan Shanks <bshanks@codeweavers.com>
Link: https://lore.kernel.org/r/20200421231003.7935-1-bshanks@codeweavers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: usbtouchscreen - add support for BonXeon TP

[ Upstream commit e3b4f94ef52ae1592cbe199bd38dbdc0d58b2217 ]

Based on available information this uses the singletouch irtouch
protocol. This is tested and confirmed to be fully functional on
the BonXeon TP hardware I have.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c

[ Upstream commit 95f59bf88bb75281cc626e283ecefdd5d5641427 ]

This patch fixes the following warning:
=============================
WARNING: suspicious RCU usage
5.7.0-rc5-next-20200514-syzkaller #0 Not tainted
-----------------------------
drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!!

Since rtnl lock is held, pass this cond in list_for_each_entry_rcu().

Reported-by: syzbot+bb82cafc737c002d11ca@syzkaller.appspotmail.com
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: bpf: Fix build error

[ Upstream commit 23ad04669f81f958e9a4121b0266228d2eb3c357 ]

GCC 10 is very strict about symbol clash, and lwt_len_hist_user contains
a symbol which clashes with libbpf:

/usr/bin/ld: samples/bpf/lwt_len_hist_user.o:(.bss+0x0): multiple definition of `bpf_log_buf'; samples/bpf/bpf_load.o:(.bss+0x8c0): first defined here
collect2: error: ld returned 1 exit status

bpf_log_buf here seems to be a leftover, so removing it.

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200511113234.80722-1-mcroce@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup raw_copy_from_user()

[ Upstream commit 51bb38cb78363fdad1f89e87357b7bc73e39ba88 ]

If raw_copy_from_user(to, from, N) returns K, callers expect
the first N - K bytes starting at to to have been replaced with
the contents of corresponding area starting at from and the last
K bytes of destination *left* *unmodified*.

What arch/sky/lib/usercopy.c is doing is broken - it can lead to e.g.
data corruption on write(2).

raw_copy_to_user() is inaccurate about return value, which is a bug,
but consequences are less drastic than for raw_copy_from_user().
And just what are those access_ok() doing in there?  I mean, look into
linux/uaccess.h; that's where we do that check (as well as zero tail
on failure in the callers that need zeroing).

AFAICS, all of that shouldn't be hard to fix; something like a patch
below might make a useful starting point.

I would suggest moving these macros into usercopy.c (they are never
used anywhere else) and possibly expanding them there; if you leave
them alive, please at least rename __copy_user_zeroing(). Again,
it must not zero anything on failed read.

Said that, I'm not sure we won't be better off simply turning
usercopy.c into usercopy.S - all that is left there is a couple of
functions, each consisting only of inline asm.

Guo Ren reply:

Yes, raw_copy_from_user is wrong, it's no need zeroing code.

unsigned long _copy_from_user(void *to, const void __user *from,
unsigned long n)
{
        unsigned long res = n;
        might_fault();
        if (likely(access_ok(from, n))) {
                kasan_check_write(to, n);
                res = raw_copy_from_user(to, from, n);
        }
        if (unlikely(res))
                memset(to + (n - res), 0, res);
        return res;
}
EXPORT_SYMBOL(_copy_from_user);

You are right and access_ok() should be removed.

but, how about:
do {
...
        "2:     stw     %3, (%1, 0)     \n"             \
+       "       subi    %0, 4          \n"               \
        "9:     stw     %4, (%1, 4)     \n"             \
+       "       subi    %0, 4          \n"               \
        "10:    stw     %5, (%1, 8)     \n"             \
+       "       subi    %0, 4          \n"               \
        "11:    stw     %6, (%1, 12)    \n"             \
+       "       subi    %0, 4          \n"               \
        "       addi    %2, 16          \n"             \
        "       addi    %1, 16          \n"             \

Don't expand __ex_table

AI Viro reply:

Hey, I've no idea about the instruction scheduling on csky -
if that doesn't slow the things down, all the better.  It's just
that copy_to_user() and friends are on fairly hot codepaths,
and in quite a few situations they will dominate the speed of
e.g. read(2).  So I tried to keep the fast path unchanged.
Up to the architecture maintainers, obviously.  Which would be
you...

As for the fixups size increase (__ex_table size is unchanged)...
You have each of those macros expanded exactly once.
So the size is not a serious argument, IMO - useless complexity
would be, if it is, in fact, useless; the size... not really,
especially since those extra subi will at least offset it.

Again, up to you - asm optimizations of (essentially)
memcpy()-style loops are tricky and can depend upon the
fairly subtle details of architecture.  So even on something
I know reasonably well I would resort to direct experiments
if I can't pass the buck to architecture maintainers.

It *is* worth optimizing - this is where read() from a file
that is already in page cache spends most of the time, etc.

Guo Ren reply:

Thx, after fixup some typo “sub %0, 4”, apply the patch.

TODO:
- user copy/from codes are still need optimizing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Fix null pointer check in cifs_read

[ Upstream commit 9bd21d4b1a767c3abebec203342f3820dcb84662 ]

Coverity scan noted a redundant null check

Coverity-id: 728517
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Shyam Prasad N <nspmangalore@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (nct7904) Fix incorrect range of temperature limit registers

[ Upstream commit 7b2fd270af27edaf02acb41a7babe805a9441914 ]

The format of temperature limitation registers are 8-bit 2's complement
and the range is -128~127.
Converts the reading value to signed char to fix the incorrect range
of temperature limitation registers.

Signed-off-by: Amy Shih <amy.shih@advantech.com.tw>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup remove duplicate irq_disable

[ Upstream commit 6633a5aa8eb6bda70eb3a9837efd28a67ccc6e0a ]

Interrupt has been disabled in __schedule() with local_irq_disable()
and enabled in finish_task_switch->finish_lock_switch() with
local_irq_enabled(), So needn't to disable irq here.

Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup perf callchain unwind

[ Upstream commit 229a0ddee1108a3f82a873e6cbbe35c92c540444 ]

[ 5221.974084] Unable to handle kernel paging request at virtual address 0xfffff000, pc: 0x8002c18e
[ 5221.985929] Oops: 00000000
[ 5221.989488]
[ 5221.989488] CURRENT PROCESS:
[ 5221.989488]
[ 5221.992877] COMM=callchain_test PID=11962
[ 5221.995213] TEXT=00008000-000087e0 DATA=00009f1c-0000a018 BSS=0000a018-0000b000
[ 5221.999037] USER-STACK=7fc18e20 KERNEL-STACK=be204680
[ 5221.999037]
[ 5222.003292] PC: 0x8002c18e (perf_callchain_kernel+0x3e/0xd4)
[ 5222.007957] LR: 0x8002c198 (perf_callchain_kernel+0x48/0xd4)
[ 5222.074873] Call Trace:
[ 5222.074873] [<800a248e>] get_perf_callchain+0x20a/0x29c
[ 5222.074873] [<8009d964>] perf_callchain+0x64/0x80
[ 5222.074873] [<8009dc1c>] perf_prepare_sample+0x29c/0x4b8
[ 5222.074873] [<8009de6e>] perf_event_output_forward+0x36/0x98
[ 5222.074873] [<800497e0>] search_exception_tables+0x20/0x44
[ 5222.074873] [<8002cbb6>] do_page_fault+0x92/0x378
[ 5222.074873] [<80098608>] __perf_event_overflow+0x54/0xdc
[ 5222.074873] [<80098778>] perf_swevent_hrtimer+0xe8/0x164
[ 5222.074873] [<8002ddd0>] update_mmu_cache+0x0/0xd8
[ 5222.074873] [<8002c014>] user_backtrace+0x58/0xc4
[ 5222.074873] [<8002c0b4>] perf_callchain_user+0x34/0xd0
[ 5222.074873] [<800a2442>] get_perf_callchain+0x1be/0x29c
[ 5222.074873] [<8009d964>] perf_callchain+0x64/0x80
[ 5222.074873] [<8009d834>] perf_output_sample+0x78c/0x858
[ 5222.074873] [<8009dc1c>] perf_prepare_sample+0x29c/0x4b8
[ 5222.074873] [<8009de94>] perf_event_output_forward+0x5c/0x98
[ 5222.097846]
[ 5222.097846] [<800a0300>] perf_event_exit_task+0x58/0x43c
[ 5222.097846] [<8006c874>] hrtimer_interrupt+0x104/0x2ec
[ 5222.097846] [<800a0300>] perf_event_exit_task+0x58/0x43c
[ 5222.097846] [<80437bb6>] dw_apb_clockevent_irq+0x2a/0x4c
[ 5222.097846] [<8006c770>] hrtimer_interrupt+0x0/0x2ec
[ 5222.097846] [<8005f2e4>] __handle_irq_event_percpu+0xac/0x19c
[ 5222.097846] [<80437bb6>] dw_apb_clockevent_irq+0x2a/0x4c
[ 5222.097846] [<8005f408>] handle_irq_event_percpu+0x34/0x88
[ 5222.097846] [<8005f480>] handle_irq_event+0x24/0x64
[ 5222.097846] [<8006218c>] handle_level_irq+0x68/0xdc
[ 5222.097846] [<8005ec76>] __handle_domain_irq+0x56/0xa8
[ 5222.097846] [<80450e90>] ck_irq_handler+0xac/0xe4
[ 5222.097846] [<80029012>] csky_do_IRQ+0x12/0x24
[ 5222.097846] [<8002a3a0>] csky_irq+0x70/0x80
[ 5222.097846] [<800ca612>] alloc_set_pte+0xd2/0x238
[ 5222.097846] [<8002ddd0>] update_mmu_cache+0x0/0xd8
[ 5222.097846] [<800a0340>] perf_event_exit_task+0x98/0x43c

The original fp check doesn't base on the real kernal stack region.
Invalid fp address may cause kernel panic.

Signed-off-by: Mao Han <han_mao@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky: Fixup msa highest 3 bits mask

[ Upstream commit 165f2d2858013253042809df082b8df7e34e86d7 ]

Just as comment mentioned, the msa format:

cr<30/31, 15> MSA register format:
31 - 29 | 28 - 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
BA Reserved SH WA B SO SEC C D V

So we should shift 29 bits not 28 bits for mask

Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ti: am33xx: fix RTC clock parent

[ Upstream commit dc6dbd51009fc412729c307161f442c0a08618f4 ]

Right now, trying to use RTC purely with the ti-sysc / clkctrl framework
fails to enable the RTC module properly. Based on experimentation, this
appears to be because RTC is sourced from the clkdiv32k optional clock.
TRM is not very clear on this topic, but fix the RTC to use the proper
source clock nevertheless.

Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200424152301.4018-1-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: stacktrace: Fix undefined reference to `walk_stackframe'

[ Upstream commit 0502bee37cdef755d63eee60236562e5605e2480 ]

Drop static declaration to fix following build error if FRAME_POINTER disabled,
riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0':
perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe'

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()

[ Upstream commit 856ec7f64688387b100b7083cdf480ce3ac41227 ]

Local variable netdev is not used in these calls.

It should be noted, that this change is required to work in bonded mode.
Otherwise we would get the following assert:

"RTNL: assertion failed at net/core/dev.c (5665)"

With the calltrace as follows:
dump_stack+0x19/0x1b
netdev_master_upper_dev_get+0x61/0x70
i40iw_addr_resolve_neigh+0x1e8/0x220
i40iw_make_cm_node+0x296/0x700
? i40iw_find_listener.isra.10+0xcc/0x110
i40iw_receive_ilq+0x3d4/0x810
i40iw_puda_poll_completion+0x341/0x420
i40iw_process_ceq+0xa5/0x280
i40iw_ceq_dpc+0x1e/0x40
tasklet_action+0x83/0x140
__do_softirq+0x125/0x2bb
call_softirq+0x1c/0x30
do_softirq+0x65/0xa0
irq_exit+0x105/0x110
do_IRQ+0x56/0xf0
common_interrupt+0x16a/0x16a
? cpuidle_enter_state+0x57/0xd0
cpuidle_idle_call+0xde/0x230
arch_cpu_idle+0xe/0xc0
cpu_startup_entry+0x14a/0x1e0
start_secondary+0x1f7/0x270
start_cpu+0x5/0x14

Link: https://lore.kernel.org/r/20200428131511.11049-1-den@openvz.org
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: freescale: select CONFIG_FIXED_PHY where needed

[ Upstream commit 99352c79af3e5f2e4724abf37fa5a2a3299b1c81 ]

I ran into a randconfig build failure with CONFIG_FIXED_PHY=m
and CONFIG_GIANFAR=y:

x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier'

It seems the same thing can happen with dpaa and ucc_geth, so change
all three to do an explicit 'select FIXED_PHY'.

The fixed-phy driver actually has an alternative stub function that
theoretically allows building network drivers when fixed-phy is
disabled, but I don't see how that would help here, as the drivers
presumably would not work then.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: legacy: fix redundant initialization warnings

[ Upstream commit d13cce757954fa663c69845611957396843ed87a ]

Fix the following cppcheck warnings:

drivers/usb/gadget/legacy/inode.c:1364:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
value = -EOPNOTSUPP;
       ^
drivers/usb/gadget/legacy/inode.c:1331:15: note: value is initialized
int    value = -EOPNOTSUPP;
              ^
drivers/usb/gadget/legacy/inode.c:1364:8: note: value is overwritten
value = -EOPNOTSUPP;
       ^
drivers/usb/gadget/legacy/inode.c:1817:8: style: Redundant initialization for 'value'. The initialized value is overwritten$
value = -EINVAL;
       ^
drivers/usb/gadget/legacy/inode.c:1787:18: note: value is initialized
ssize_t   value = len, length = len;
                 ^
drivers/usb/gadget/legacy/inode.c:1817:8: note: value is overwritten
value = -EINVAL;
       ^
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: twl6030-usb: Fix a resource leak in an error handling path in 'twl6030_usb_probe()'

[ Upstream commit f058764d19000d98aef72010468db1f69faf9fa0 ]

A call to 'regulator_get()' is hidden in 'twl6030_usb_ldo_init()'. A
corresponding put must be performed in the error handling path, as
already done in the remove function.

While at it, also move a 'free_irq()' call in the error handling path in
order to be consistent.

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: pci: Enable extcon driver for Intel Merrifield

[ Upstream commit 066c09593454e89bc605ffdff1c9810061f9b1e1 ]

Intel Merrifield provides a DR support via PMIC which has its own
extcon driver.

Add a property string to link to that driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cachefiles: Fix race between read_waiter and read_copier involving op->to_do

[ Upstream commit 7bb0c5338436dae953622470d52689265867f032 ]

There is a potential race in fscache operation enqueuing for reading and
copying multiple pages from cachefiles to netfs.  The problem can be seen
easily on a heavy loaded system (for example many processes reading files
continually on an NFS share covered by fscache triggered this problem within
a few minutes).

The race is due to cachefiles_read_waiter() adding the op to the monitor
to_do list and then then drop the object->work_lock spinlock before
completing fscache_enqueue_operation().  Once the lock is dropped,
cachefiles_read_copier() grabs the op, completes processing it, and
makes it through fscache_retrieval_complete() which sets the op->state to
the final state of FSCACHE_OP_ST_COMPLETE(4).  When cachefiles_read_waiter()
finally gets through the remainder of fscache_enqueue_operation()
it sees the invalid state, and hits the ASSERTCMP and the following
oops is seen:
[ 2259.612361] FS-Cache:
[ 2259.614785] FS-Cache: Assertion failed
[ 2259.618639] FS-Cache: 4 == 5 is false
[ 2259.622456] ------------[ cut here ]------------
[ 2259.627190] kernel BUG at fs/fscache/operation.c:70!
...
[ 2259.791675] RIP: 0010:[<ffffffffc061b4cf>]  [<ffffffffc061b4cf>] fscache_enqueue_operation+0xff/0x170 [fscache]
[ 2259.802059] RSP: 0000:ffffa0263d543be0  EFLAGS: 00010046
[ 2259.807521] RAX: 0000000000000019 RBX: ffffa01a4d390480 RCX: 0000000000000006
[ 2259.814847] RDX: 0000000000000000 RSI: 0000000000000046 RDI: ffffa0263d553890
[ 2259.822176] RBP: ffffa0263d543be8 R08: 0000000000000000 R09: ffffa0263c2d8708
[ 2259.829502] R10: 0000000000001e7f R11: 0000000000000000 R12: ffffa01a4d390480
[ 2259.844483] R13: ffff9fa9546c5920 R14: ffffa0263d543c80 R15: ffffa0293ff9bf10
[ 2259.859554] FS:  00007f4b6efbd700(0000) GS:ffffa0263d540000(0000) knlGS:0000000000000000
[ 2259.875571] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2259.889117] CR2: 00007f49e1624ff0 CR3: 0000012b38b38000 CR4: 00000000007607e0
[ 2259.904015] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2259.918764] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2259.933449] PKRU: 55555554
[ 2259.943654] Call Trace:
[ 2259.953592]  <IRQ>
[ 2259.955577]  [<ffffffffc03a7c12>] cachefiles_read_waiter+0x92/0xf0 [cachefiles]
[ 2259.978039]  [<ffffffffa34d3942>] __wake_up_common+0x82/0x120
[ 2259.991392]  [<ffffffffa34d3a63>] __wake_up_common_lock+0x83/0xc0
[ 2260.004930]  [<ffffffffa34d3510>] ? task_rq_unlock+0x20/0x20
[ 2260.017863]  [<ffffffffa34d3ab3>] __wake_up+0x13/0x20
[ 2260.030230]  [<ffffffffa34c72a0>] __wake_up_bit+0x50/0x70
[ 2260.042535]  [<ffffffffa35bdcdb>] unlock_page+0x2b/0x30
[ 2260.054495]  [<ffffffffa35bdd09>] page_endio+0x29/0x90
[ 2260.066184]  [<ffffffffa368fc81>] mpage_end_io+0x51/0x80

CPU1
cachefiles_read_waiter()
20 static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode,
21                                   int sync, void *_key)
22 {
...
61         spin_lock(&object->work_lock);
62         list_add_tail(&monitor->op_link, &op->to_do);
63         spin_unlock(&object->work_lock);
<begin race window>
64
65         fscache_enqueue_retrieval(op);
182 static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op)
183 {
184         fscache_enqueue_operation(&op->op);
185 }
58 void fscache_enqueue_operation(struct fscache_operation *op)
59 {
60         struct fscache_cookie *cookie = op->object->cookie;
61
62         _enter("{OBJ%x OP%x,%u}",
63                op->object->debug_id, op->debug_id, atomic_read(&op->usage));
64
65         ASSERT(list_empty(&op->pend_link));
66         ASSERT(op->processor != NULL);
67         ASSERT(fscache_object_is_available(op->object));
68         ASSERTCMP(atomic_read(&op->usage), >, 0);
<end race window>

CPU2
cachefiles_read_copier()
168         while (!list_empty(&op->to_do)) {
...
202                 fscache_end_io(op, monitor->netfs_page, error);
203                 put_page(monitor->netfs_page);
204                 fscache_retrieval_complete(op, 1);

CPU1
58 void fscache_enqueue_operation(struct fscache_operation *op)
59 {
...
69         ASSERTIFCMP(op->state != FSCACHE_OP_ST_IN_PROGRESS,
70                     op->state, ==,  FSCACHE_OP_ST_CANCELLED);

Signed-off-by: Lei Xue <carmark.dlut@gmail.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Use GEM obj reference for KFD BOs

[ Upstream commit 39b3128d7ffd44e400e581e6f49e88cb42bef9a1 ]

Releasing the AMDGPU BO ref directly leads to problems when BOs were
exported as DMA bufs. Releasing the GEM reference makes sure that the
AMDGPU/TTM BO is not freed too early.

Also take a GEM reference when importing BOs from DMABufs to keep
references to imported BOs balances properly.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/powerplay: perform PG ungate prior to CG ungate

[ Upstream commit f4fcfa4282c1a1bf51475ebb0ffda623eebf1191 ]

Since gfxoff should be disabled first before trying to access those
GC registers.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: drop unnecessary cancel_delayed_work_sync on PG ungate

[ Upstream commit 1fe48ec08d9f2e26d893a6c05bd6c99a3490f9ef ]

As this is already properly handled in amdgpu_gfx_off_ctrl(). In fact,
this unnecessary cancel_delayed_work_sync may leave a small time window
for race condition and is dangerous.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Grab glock reference sooner in gfs2_add_revoke

[ Upstream commit f4e2f5e1a527ce58fc9f85145b03704779a3123e ]

This patch rearranges gfs2_add_revoke so that the extra glock
reference is added earlier on in the function to avoid races in which
the glock is freed before the new reference is taken.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: move privileged user check to gfs2_quota_lock_check

[ Upstream commit 4ed0c30811cb4d30ef89850b787a53a84d5d2bcb ]

Before this patch, function gfs2_quota_lock checked if it was called
from a privileged user, and if so, it bypassed the quota check:
superuser can operate outside the quotas.
That's the wrong place for the check because the lock/unlock functions
are separate from the lock_check function, and you can do lock and
unlock without actually checking the quotas.

This patch moves the check to gfs2_quota_lock_check.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: microchip: encx24j600: add missed kthread_stop

[ Upstream commit ff8ce319e9c25e920d994cc35236f0bb32dfc8f3 ]

This driver calls kthread_run() in probe, but forgets to call
kthread_stop() in probe failure and remove.
Add the missed kthread_stop() to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: add mapping for ASRock TRX40 Creator

[ Upstream commit da7a8f1a8fc3e14c6dcc52b4098bddb8f20390be ]

This is another TRX40 based motherboard with ALC1220-VB USB-audio
that requires a static mapping table.

This motherboard also has a PCI device which advertises no codecs. The
PCI ID is 1022:1487 and PCI SSID is 1022:d102. As this is using the AMD
vendor ID, don't blacklist for now in case other boards have a working
audio device with the same ssid.

alsa-info.sh report for this board:
http://alsa-project.org/db/?f=0a742f89066527497b77ce16bca486daccf8a70c

Signed-off-by: Andrew Oakley <andrew@adoakley.name>
Link: https://lore.kernel.org/r/20200503141639.35519-1-andrew@adoakley.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: tegra: mask GPIO IRQs during IRQ shutdown

[ Upstream commit 0cf253eed5d2bdf7bb3152457b38f39b012955f7 ]

The driver currently leaves GPIO IRQs unmasked even when the GPIO IRQ
client has released the GPIO IRQ. This allows the HW to raise IRQs, and
SW to process them, after shutdown. Fix this by masking the IRQ when it's
shut down. This is usually taken care of by the irqchip core, but since
this driver has a custom irq_shutdown implementation, it must do this
explicitly itself.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Link: https://lore.kernel.org/r/20200427232605.11608-1-swarren@wwwdotorg.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi

[ Upstream commit 855bdca1781c79eb661f89c8944c4a719ce720e8 ]

A test with the command below gives these errors:

arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-evb.dt.yaml: spi-1:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-0:
'#address-cells' is a required property
arch/arm/boot/dts/rk3229-xms6.dt.yaml: spi-1:
'#address-cells' is a required property

The $nodename pattern for spi nodes is
"^spi(@.*|-[0-9a-f])*$". To prevent warnings rename
'spi-0' and 'spi-1' pinctrl sub nodenames to
'spi0' and 'spi1' in 'rk322x.dtsi'.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/spi-controller.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200424123923.8192-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: swap clock-names of gpu nodes

[ Upstream commit b14f3898d2c25a9b47a61fb879d0b1f3af92c59b ]

Dts files with Rockchip 'gpu' nodes were manually verified.
In order to automate this process arm,mali-utgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-utgard.yaml expects clock-names values
in the same order, so fix that.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425192500.1808-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: swap interrupts interrupt-names rk3399 gpu node

[ Upstream commit c604fd810bda667bdc20b2c041917baa7803e0fb ]

Dts files with Rockchip rk3399 'gpu' nodes were manually verified.
In order to automate this process arm,mali-midgard.txt
has been converted to yaml. In the new setup dtbs_check with
arm,mali-midgard.yaml expects interrupts and interrupt-names values
in the same order. Fix this for rk3399.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/
arm,mali-midgard.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425143837.18706-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: fix status for &gmac2phy in rk3328-evb.dts

[ Upstream commit c617ed88502d0b05149e7f32f3b3fd8a0663f7e2 ]

The status was removed of the '&gmac2phy' node with the apply
of a patch long time ago, so fix status for '&gmac2phy'
in 'rk3328-evb.dts'.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200425122345.12902-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: fix phy nodename for rk3229-xms6

[ Upstream commit 621c8d0c233e260232278a4cfd3380caa3c1da29 ]

A test with the command below gives for example this error:

arch/arm/boot/dts/rk3229-xms6.dt.yaml: phy@0:
'#phy-cells' is a required property

The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200416170321.4216-2-jbx6244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: fix phy nodename for rk3228-evb

[ Upstream commit 287e0d538fcec2f6e8eb1e565bf0749f3b90186d ]

A test with the command below gives for example this error:

arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0:
'#phy-cells' is a required property

The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200416170321.4216-1-jbx6244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum: Fix use-after-free of split/unsplit/type_set in case reload fails

commit 4340f42f207eacb81e7a6b6bb1e3b6afad9a2e26 upstream.

In case of reload fail, the mlxsw_sp->ports contains a pointer to a
freed memory (either by reload_down() or reload_up() error path).
Fix this by initializing the pointer to NULL and checking it before
dereferencing in split/unsplit/type_set callpaths.

Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload")
Reported-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: fix a memory leak bug.

commit febfd9d3c7f74063e8e630b15413ca91b567f963 upstream.

In function mlx4_opreq_action(), pointer "mailbox" is not released,
when mlx4_cmd_box() return and error, causing a memory leak bug.
Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can
free this pointer.

Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sun: fix missing release regions in cas_init_one().

commit 5a730153984dd13f82ffae93d7170d76eba204e9 upstream.

In cas_init_one(), "pdev" is requested by "pci_request_regions", but it
was not released after a call of the function “pci_write_config_byte”
failed. Thus replace the jump target “err_write_cacheline” by
"err_out_free_res".

Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: free record only on encryption error

commit 635d9398178659d8ddba79dd061f9451cec0b4d1 upstream.

We cannot free record on any transient error because it leads to
losing previos data. Check socket error to know whether record must
be freed or not.

Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: fix encryption error checking

commit a7bff11f6f9afa87c25711db8050c9b5324db0e2 upstream.

bpf_exec_tx_verdict() can return negative value for copied
variable. In that case this value will be pushed back to caller
and the real error code will be lost. Fix it using signed type and
checking for positive value.

Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error")
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Annotate mutex destroy for root ns

commit 9ca415399dae133b00273a4283ef31d003a6818d upstream.

Invoke mutex_destroy() to catch any errors.

Fixes: 2cc43b494a6c ("net/mlx5_core: Managing root flow table")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix error flow in case of function_setup failure

[ Upstream commit 4f7400d5cbaef676e00cdffb0565bf731c6bb09e ]

Currently, if an error occurred during mlx5_function_setup(), we
keep dev->state as DEVICE_STATE_UP.
Fixing it by adding a goto label.

Fixes: e161105e58da ("net/mlx5: Function setup/teardown procedures")
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Update netdev txq on completions during closure

[ Upstream commit 5e911e2c06bd8c17df29147a5e2d4b17fafda024 ]

On sq closure when we free its descriptors, we should also update netdev
txq on completions which would not arrive. Otherwise if we reopen sqs
and attach them back, for example on fw fatal recovery flow, we may get
tx timeout.

Fixes: 29429f3300a3 ("net/mlx5e: Timeout if SQ doesn't flush during close")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Fix memory leak in mlx5_events_init

[ Upstream commit df14ad1eccb04a4a28c90389214dbacab085b244 ]

Fix memory leak in mlx5_events_init(), in case
create_single_thread_workqueue() fails, events
struct should be freed.

Fixes: 5d3c537f9070 ("net/mlx5: Handle event of power detection in the PCIE slot")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: Fix inner tirs handling

[ Upstream commit a16b8e0dcf7043bee46174bed0553cc9e36b63a5 ]

In the cited commit inner_tirs argument was added to create and destroy
inner tirs, and no indication was added to mlx5e_modify_tirs_hash()
function. In order to have a consistent handling, use
inner_indir_tir[0].tirn in tirs destroy/modify function as an indication
to whether inner tirs are created.
Inner tirs are not created for representors and before this commit,
a call to mlx5e_modify_tirs_hash() was sending HW commands to
modify non-existent inner tirs.

Fixes: 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5e: kTLS, Destroy key object after destroying the TIS

[ Upstream commit 16736e11f43b80a38f98f6add54fab3b8c297df3 ]

The TLS TIS object contains the dek/key ID.
By destroying the key first, the TIS would contain an invalid
non-existing key ID.
Reverse the destroy order, this also acheives the desired assymetry
between the destroy and the create flows.

Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: block BH before using dst_cache

[ Upstream commit 1378817486d6860f6a927f573491afe65287abf1 ]

dst_cache_get() documents it must be used with BH disabled.

sysbot reported :

BUG: using smp_processor_id() in preemptible [00000000] code: /21697
caller is dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68
CPU: 0 PID: 21697 Comm: Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
check_preemption_disabled lib/smp_processor_id.c:47 [inline]
debug_smp_processor_id.cold+0x88/0x9b lib/smp_processor_id.c:57
dst_cache_get+0x3a/0xb0 net/core/dst_cache.c:68
tipc_udp_xmit.isra.0+0xb9/0xad0 net/tipc/udp_media.c:164
tipc_udp_send_msg+0x3e6/0x490 net/tipc/udp_media.c:244
tipc_bearer_xmit_skb+0x1de/0x3f0 net/tipc/bearer.c:526
tipc_enable_bearer+0xb2f/0xd60 net/tipc/bearer.c:331
__tipc_nl_bearer_enable+0x2bf/0x390 net/tipc/bearer.c:995
tipc_nl_bearer_enable+0x1e/0x30 net/tipc/bearer.c:1003
genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362
___sys_sendmsg+0x100/0x170 net/socket.c:2416
__sys_sendmsg+0xec/0x1b0 net/socket.c:2449
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29

Fixes: e9c1a793210f ("tipc: add dst_cache support for udp media")
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: Start shutdown on association restart if in SHUTDOWN-SENT state and socket is closed

[ Upstream commit d3e8e4c11870413789f029a71e72ae6e971fe678 ]

Commit bdf6fa52f01b ("sctp: handle association restarts when the
socket is closed.") starts shutdown when an association is restarted,
if in SHUTDOWN-PENDING state and the socket is closed. However, the
rationale stated in that commit applies also when in SHUTDOWN-SENT
state - we don't want to move an association to ESTABLISHED state when
the socket has been closed, because that results in an association
that is unreachable from user space.

The problem scenario:

1.  Client crashes and/or restarts.

2.  Server (using one-to-one socket) calls close(). SHUTDOWN is lost.

3.  Client reconnects using the same addresses and ports.

4.  Server's association is restarted. The association and the socket
    move to ESTABLISHED state, even though the server process has
    closed its descriptor.

Also, after step 4 when the server process exits, some resources are
leaked in an attempt to release the underlying inet sock structure in
ESTABLISHED state:

    IPv4: Attempt to release TCP socket in state 1 00000000377288c7

Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if
an association is restarted in SHUTDOWN-SENT state and the socket is
closed, then start shutdown and don't move the association or the
socket to ESTABLISHED state.

Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.")
Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: Don't add the shutdown timer if its already been added

[ Upstream commit 20a785aa52c82246055a089e55df9dac47d67da1 ]

This BUG halt was reported a while back, but the patch somehow got
missed:

PID: 2879   TASK: c16adaa0  CPU: 1   COMMAND: "sctpn"
#0 [f418dd28] crash_kexec at c04a7d8c
#1 [f418dd7c] oops_end at c0863e02
#2 [f418dd90] do_invalid_op at c040aaca
#3 [f418de28] error_code (via invalid_op) at c08631a5
    EAX: f34baac0  EBX: 00000090  ECX: f418deb0  EDX: f5542950  EBP: 00000000
    DS:  007b      ESI: f34ba800  ES:  007b      EDI: f418dea0  GS:  00e0
    CS:  0060      EIP: c046fa5e  ERR: ffffffff  EFLAGS: 00010286
#4 [f418de5c] add_timer at c046fa5e
#5 [f418de68] sctp_do_sm at f8db8c77 [sctp]
#6 [f418df30] sctp_primitive_SHUTDOWN at f8dcc1b5 [sctp]
#7 [f418df48] inet_shutdown at c080baf9
#8 [f418df5c] sys_shutdown at c079eedf
#9 [f418df70] sys_socketcall at c079fe88
    EAX: ffffffda  EBX: 0000000d  ECX: bfceea90  EDX: 0937af98
    DS:  007b      ESI: 0000000c  ES:  007b      EDI: b7150ae4
    SS:  007b      ESP: bfceea7c  EBP: bfceeaa8  GS:  0033
    CS:  0073      EIP: b775c424  ERR: 00000066  EFLAGS: 00000282

It appears that the side effect that starts the shutdown timer was processed
multiple times, which can happen as multiple paths can trigger it.  This of
course leads to the BUG halt in add_timer getting called.

Fix seems pretty straightforward, just check before the timer is added if its
already been started.  If it has mod the timer instead to min(current
expiration, new expiration)

Its been tested but not confirmed to fix the problem, as the issue has only
occured in production environments where test kernels are enjoined from being
installed.  It appears to be a sane fix to me though.  Also, recentely,
Jere found a reproducer posted on list to confirm that this resolves the
issues

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: jere.leppanen@nokia.com
CC: marcelo.leitner@gmail.com
CC: netdev@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8152: support additional Microsoft Surface Ethernet Adapter variant

[ Upstream commit c27a204383616efba5a4194075e90819961ff66a ]

Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to
Ethernet and USB Adapter' and may be used as a component of other devices
in future. Tested and working with the r8152 driver.

Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend'
issue which this device will cause (personally confirmed).

Signed-off-by: Marc Payne <marc.payne@mdpsys.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nexthop: Fix attribute checking for groups

[ Upstream commit 84be69b869a5a496a6cfde9b3c29509207a1f1fa ]

For nexthop groups, attributes after NHA_GROUP_TYPE are invalid, but
nh_check_attr_group starts checking at NHA_GROUP. The group type defaults
to multipath and the NHA_GROUP_TYPE is currently optional so this has
slipped through so far. Fix the attribute checking to handle support of
new group types.

Fixes: 430a049190de ("nexthop: Add support for nexthop groups")
Signed-off-by: ASSOGBA Emery <assogba.emery@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/tls: fix race condition causing kernel panic

[ Upstream commit 0cada33241d9de205522e3858b18e506ca5cce2c ]

tls_sw_recvmsg() and tls_decrypt_done() can be run concurrently.
// tls_sw_recvmsg()
if (atomic_read(&ctx->decrypt_pending))
crypto_wait_req(-EINPROGRESS, &ctx->async_wait);
else
reinit_completion(&ctx->async_wait.completion);

//tls_decrypt_done()
   pending = atomic_dec_return(&ctx->decrypt_pending);

   if (!pending && READ_ONCE(ctx->async_notify))
   complete(&ctx->async_wait.completion);

Consider the scenario tls_decrypt_done() is about to run complete()

if (!pending && READ_ONCE(ctx->async_notify))

and tls_sw_recvmsg() reads decrypt_pending == 0, does reinit_completion(),
then tls_decrypt_done() runs complete(). This sequence of execution
results in wrong completion. Consequently, for next decrypt request,
it will not wait for completion, eventually on connection close, crypto
resources freed, there is no way to handle pending decrypt response.

This race condition can be avoided by having atomic_read() mutually
exclusive with atomic_dec_return(),complete().Intoduced spin lock to
ensure the mutual exclution.

Addressed similar problem in tx direction.

v1->v2:
- More readable commit message.
- Corrected the lock to fix new race scenario.
- Removed barrier which is not needed now.

Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net sched: fix reporting the first-time use timestamp

[ Upstream commit b15e62631c5f19fea9895f7632dae9c1b27fe0cd ]

When a new action is installed, firstuse field of 'tcf_t' is explicitly set
to 0. Value of zero means "new action, not yet used"; as a packet hits the
action, 'firstuse' is stamped with the current jiffies value.

tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.

Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: revert "net: get rid of an signed integer overflow in ip_idents_reserve()"

[ Upstream commit a6211caa634da39d861a47437ffcda8b38ef421b ]

Commit adb03115f459 ("net: get rid of an signed integer overflow in ip_idents_reserve()")
used atomic_cmpxchg to replace "atomic_add_return" inside the function
"ip_idents_reserve". The reason was to avoid UBSAN warning.
However, this change has caused performance degrade and in GCC-8,
fno-strict-overflow is now mapped to -fwrapv -fwrapv-pointer
and signed integer overflow is now undefined by default at all
optimization levels[1]. Moreover, it was a bug in UBSAN vs -fwrapv
/-fno-strict-overflow, so Let's revert it safely.

[1] https://gcc.gnu.org/gcc-8/changes.html

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiong Wang <jiongwang@huawei.com>
Signed-off-by: Yuqi Jin <jinyuqi@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qrtr: Fix passing invalid reference to qrtr_local_enqueue()

[ Upstream commit d28ea1fbbf437054ef339afec241019f2c4e2bb6 ]

Once the traversal of the list is completed with list_for_each_entry(),
the iterator (node) will point to an invalid object. So passing this to
qrtr_local_enqueue() which is outside of the iterator block is erroneous
eventhough the object is not used.

So fix this by passing NULL to qrtr_local_enqueue().

Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: nlmsg_cancel() if put fails for nhmsg

[ Upstream commit d69100b8eee27c2d60ee52df76e0b80a8d492d34 ]

Fixes data remnant seen when we fail to reserve space for a
nexthop group during a larger dump.

If we fail the reservation, we goto nla_put_failure and
cancel the message.

Reproduce with the following iproute2 commands:
=====================
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add dummy3 type dummy
ip link add dummy4 type dummy
ip link add dummy5 type dummy
ip link add dummy6 type dummy
ip link add dummy7 type dummy
ip link add dummy8 type dummy
ip link add dummy9 type dummy
ip link add dummy10 type dummy
ip link add dummy11 type dummy
ip link add dummy12 type dummy
ip link add dummy13 type dummy
ip link add dummy14 type dummy
ip link add dummy15 type dummy
ip link add dummy16 type dummy
ip link add dummy17 type dummy
ip link add dummy18 type dummy
ip link add dummy19 type dummy
ip link add dummy20 type dummy
ip link add dummy21 type dummy
ip link add dummy22 type dummy
ip link add dummy23 type dummy
ip link add dummy24 type dummy
ip link add dummy25 type dummy
ip link add dummy26 type dummy
ip link add dummy27 type dummy
ip link add dummy28 type dummy
ip link add dummy29 type dummy
ip link add dummy30 type dummy
ip link add dummy31 type dummy
ip link add dummy32 type dummy

ip link set dummy1 up
ip link set dummy2 up
ip link set dummy3 up
ip link set dummy4 up
ip link set dummy5 up
ip link set dummy6 up
ip link set dummy7 up
ip link set dummy8 up
ip link set dummy9 up
ip link set dummy10 up
ip link set dummy11 up
ip link set dummy12 up
ip link set dummy13 up
ip link set dummy14 up
ip link set dummy15 up
ip link set dummy16 up
ip link set dummy17 up
ip link set dummy18 up
ip link set dummy19 up
ip link set dummy20 up
ip link set dummy21 up
ip link set dummy22 up
ip link set dummy23 up
ip link set dummy24 up
ip link set dummy25 up
ip link set dummy26 up
ip link set dummy27 up
ip link set dummy28 up
ip link set dummy29 up
ip link set dummy30 up
ip link set dummy31 up
ip link set dummy32 up

ip link set dummy33 up
ip link set dummy34 up

ip link set vrf-red up
ip link set vrf-blue up

ip link set dummyVRFred up
ip link set dummyVRFblue up

ip ro add 1.1.1.1/32 dev dummy1
ip ro add 1.1.1.2/32 dev dummy2
ip ro add 1.1.1.3/32 dev dummy3
ip ro add 1.1.1.4/32 dev dummy4
ip ro add 1.1.1.5/32 dev dummy5
ip ro add 1.1.1.6/32 dev dummy6
ip ro add 1.1.1.7/32 dev dummy7
ip ro add 1.1.1.8/32 dev dummy8
ip ro add 1.1.1.9/32 dev dummy9
ip ro add 1.1.1.10/32 dev dummy10
ip ro add 1.1.1.11/32 dev dummy11
ip ro add 1.1.1.12/32 dev dummy12
ip ro add 1.1.1.13/32 dev dummy13
ip ro add 1.1.1.14/32 dev dummy14
ip ro add 1.1.1.15/32 dev dummy15
ip ro add 1.1.1.16/32 dev dummy16
ip ro add 1.1.1.17/32 dev dummy17
ip ro add 1.1.1.18/32 dev dummy18
ip ro add 1.1.1.19/32 dev dummy19
ip ro add 1.1.1.20/32 dev dummy20
ip ro add 1.1.1.21/32 dev dummy21
ip ro add 1.1.1.22/32 dev dummy22
ip ro add 1.1.1.23/32 dev dummy23
ip ro add 1.1.1.24/32 dev dummy24
ip ro add 1.1.1.25/32 dev dummy25
ip ro add 1.1.1.26/32 dev dummy26
ip ro add 1.1.1.27/32 dev dummy27
ip ro add 1.1.1.28/32 dev dummy28
ip ro add 1.1.1.29/32 dev dummy29
ip ro add 1.1.1.30/32 dev dummy30
ip ro add 1.1.1.31/32 dev dummy31
ip ro add 1.1.1.32/32 dev dummy32

ip next add id 1 via 1.1.1.1 dev dummy1
ip next add id 2 via 1.1.1.2 dev dummy2
ip next add id 3 via 1.1.1.3 dev dummy3
ip next add id 4 via 1.1.1.4 dev dummy4
ip next add id 5 via 1.1.1.5 dev dummy5
ip next add id 6 via 1.1.1.6 dev dummy6
ip next add id 7 via 1.1.1.7 dev dummy7
ip next add id 8 via 1.1.1.8 dev dummy8
ip next add id 9 via 1.1.1.9 dev dummy9
ip next add id 10 via 1.1.1.10 dev dummy10
ip next add id 11 via 1.1.1.11 dev dummy11
ip next add id 12 via 1.1.1.12 dev dummy12
ip next add id 13 via 1.1.1.13 dev dummy13
ip next add id 14 via 1.1.1.14 dev dummy14
ip next add id 15 via 1.1.1.15 dev dummy15
ip next add id 16 via 1.1.1.16 dev dummy16
ip next add id 17 via 1.1.1.17 dev dummy17
ip next add id 18 via 1.1.1.18 dev dummy18
ip next add id 19 via 1.1.1.19 dev dummy19
ip next add id 20 via 1.1.1.20 dev dummy20
ip next add id 21 via 1.1.1.21 dev dummy21
ip next add id 22 via 1.1.1.22 dev dummy22
ip next add id 23 via 1.1.1.23 dev dummy23
ip next add id 24 via 1.1.1.24 dev dummy24
ip next add id 25 via 1.1.1.25 dev dummy25
ip next add id 26 via 1.1.1.26 dev dummy26
ip next add id 27 via 1.1.1.27 dev dummy27
ip next add id 28 via 1.1.1.28 dev dummy28
ip next add id 29 via 1.1.1.29 dev dummy29
ip next add id 30 via 1.1.1.30 dev dummy30
ip next add id 31 via 1.1.1.31 dev dummy31
ip next add id 32 via 1.1.1.32 dev dummy32

i=100

while [ $i -le 200 ]
do
ip next add id $i group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19

echo $i

((i++))

done

ip next add id 999 group 1/2/3/4/5/6

ip next ls

========================

Fixes: ab84be7e54fc ("net: Initial nexthop code")
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: fix RX hashing for non-10G ports

[ Upstream commit 3138a07ce219acde4c0d7ea0b6d54ba64153328b ]

When rxhash is enabled on any ethernet port except the first in each CP
block, traffic flow is prevented.  The analysis is below:

I've been investigating this afternoon, and what I've found, comparing
a kernel without 895586d5dc32 and with 895586d5dc32 applied is:

- The table programmed into the hardware via mvpp22_rss_fill_table()
  appears to be identical with or without the commit.

- When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports
  that c2.attr[0] and c2.attr[2] are written back containing:

   - with 895586d5dc32, failing:    00200000 40000000
   - without 895586d5dc32, working: 04000000 40000000

- When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as:

   04000000 00000000

The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the
first value is the queue number, which comprises two fields. The high
5 bits are 24:29 and the low three are 21:23 inclusive. This comes
from:

       c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) |
                     MVPP22_CLS_C2_ATTR0_QLOW(ql);

So, the working case gives eth2 a queue id of 4.0, or 32 as per
port->first_rxq, and the non-working case a queue id of 0.1, or 1.
The allocation of queue IDs seems to be in mvpp2_port_probe():

        if (priv->hw_version == MVPP21)
                port->first_rxq = port->id * port->nrxqs;
        else
                port->first_rxq = port->id * priv->max_port_rxqs;

Where:

        if (priv->hw_version == MVPP21)
                priv->max_port_rxqs = 8;
        else
                priv->max_port_rxqs = 32;

Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1
(eth2) be 32. It seems the idea is that the first 32 queues belong to
port 0, the second 32 queues belong to port 1, etc.

mvpp2_rss_port_c2_enable() gets the queue number from it's parameter,
'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns
port->rss_ctx[0].

mvpp22_rss_context_create() is responsible for allocating that, which
it does by looking for an unallocated priv->rss_tables[] pointer. This
table is shared amongst all ports on the CP silicon.

When we write the tables in mvpp22_rss_fill_table(), the RSS table
entry is defined by:

                u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) |
                          MVPP22_RSS_INDEX_TABLE_ENTRY(i);

where rss_ctx is the context ID (queue number) and i is the index in
the table.

If we look at what is written:

- The first table to be written has "sel" values of 00000000..0000001f,
  containing values 0..3. This appears to be for eth1. This is table 0,
  RX queue number 0.
- The second table has "sel" values of 00000100..0000011f, and appears
  to be for eth2.  These contain values 0x20..0x23. This is table 1,
  RX queue number 0.
- The third table has "sel" values of 00000200..0000021f, and appears
  to be for eth3.  These contain values 0x40..0x43. This is table 2,
  RX queue number 0.

How do queue numbers translate to the RSS table?  There is another
table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field
of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE
register. Before 895586d5dc32, it was:

       mvpp2_write(priv, MVPP22_RSS_INDEX,
                   MVPP22_RSS_INDEX_QUEUE(port->first_rxq));
       mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE,
                   MVPP22_RSS_TABLE_POINTER(port->id));

and after:

       mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx));
       mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx));

Before the commit, for eth2, that would've contained '32' for the
index and '1' for the table pointer - mapping queue 32 to table 1.
Remember that this is queue-high.queue-low of 4.0.

After the commit, we appear to map queue 1 to table 1. That again
looks fine on the face of it.

Section 9.3.1 of the A8040 manual seems indicate the reason that the
queue number is separated. queue-low seems to always come from the
classifier, whereas queue-high can be from the ingress physical port
number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG.

We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high
comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to
be where our bug comes from.

mvpp2_cls_oversize_rxq_set() sets this up as:

        mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id),
                    (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS));

        val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
        val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
        mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);

Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high
for eth2 is _always_ 4, so only queues 32 through 39 inclusive are
available to eth2. Yet, we're trying to tell the classifier to set
queue-high, which will be ignored, to zero. Hence, the queue-high
field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be
ignored.

This means we end up directing traffic from eth2 not to queue 1, but
to queue 33, and then we tell it to look up queue 33 in the RSS table.
However, RSS table has not been programmed for queue 33, and so it ends
up (presumably) dropping the packets.

It seems that mvpp22_rss_context_create() doesn't take account of the
fact that the upper 5 bits of the queue ID can't actually be changed
due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that
mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either
way, these two functions mutually disagree with what queue number
should be used.

Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU
validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used
for over-sized packets attempting to egress through this port. With
the classifier having had RSS enabled and directing eth2 traffic to
queue 1, we may still have packets appearing on queue 32 for this port.

However, the only way we may end up with over-sized packets attempting
to egress through eth2 - is if the A8040 forwards frames between its
ports. From what I can see, we don't support that feature, and the
kernel restricts the egress packet size to the MTU. In any case, if we
were to attempt to transmit an oversized packet, we have no support in
the kernel to deal with that appearing in the port's receive queue.

So, this patch attempts to solve the issue by clearing the
MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH()
from the classifier to define the queue-high field of the queue number.

My testing seems to confirm my findings above - clearing this bit
means that if I enable rxhash on eth2, the interface can then pass
traffic, as we are now directing traffic to RX queue 1 rather than
queue 33. Traffic still seems to work with rxhash off as well.

Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx5: Add command entry handling completion

[ Upstream commit 17d00e839d3b592da9659c1977d45f85b77f986a ]

When FW response to commands is very slow and all command entries in
use are waiting for completion we can have a race where commands can get
timeout before they get out of the queue and handled. Timeout
completion on uninitialized command will cause releasing command's
buffers before accessing it for initialization and then we will get NULL
pointer exception while trying access it. It may also cause releasing
buffers of another command since we may have timeout completion before
even allocating entry index for this command.
Add entry handling completion to avoid this race.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipip: fix wrong address family in init error path

[ Upstream commit 57ebc8f08504f176eb0f25b3e0fde517dec61a4f ]

In case of error with MPLS support the code is misusing AF_INET
instead of AF_MPLS.

Fixes: 1b69e7e6c4da ("ipip: support MPLS over IPv4")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: inet_csk: Fix so_reuseport bind-address cache in tb->fast*

[ Upstream commit 88d7fcfa3b1fe670f0412b95be785aafca63352b ]

The commit 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
added a bind-address cache in tb->fast*.  The tb->fast* caches the address
of a sk which has successfully been binded with SO_REUSEPORT ON.  The idea
is to avoid the expensive conflict search in inet_csk_bind_conflict().

There is an issue with wildcard matching where sk_reuseport_match() should
have returned false but it is currently returning true.  It ends up
hiding bind conflict.  For example,

bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::2]:443"); /* with    SO_REUSEPORT. Succeed. */
bind("[::]:443");  /* with    SO_REUSEPORT. Still Succeed where it shouldn't */

The last bind("[::]:443") with SO_REUSEPORT on should have failed because
it should have a conflict with the very first bind("[::1]:443") which
has SO_REUSEPORT off.  However, the address "[::2]" is cached in
tb->fast* in the second bind. In the last bind, the sk_reuseport_match()
returns true because the binding sk's wildcard addr "[::]" matches with
the "[::2]" cached in tb->fast*.

The correct bind conflict is reported by removing the second
bind such that tb->fast* cache is not involved and forces the
bind("[::]:443") to go through the inet_csk_bind_conflict():

bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::]:443");  /* with    SO_REUSEPORT. -EADDRINUSE */

The expected behavior for sk_reuseport_match() is, it should only allow
the "cached" tb->fast* address to be used as a wildcard match but not
the address of the binding sk.  To do that, the current
"bool match_wildcard" arg is split into
"bool match_sk1_wildcard" and "bool match_sk2_wildcard".

This change only affects the sk_reuseport_match() which is only
used by inet_csk (e.g. TCP).
The other use cases are calling inet_rcv_saddr_equal() and
this patch makes it pass the same "match_wildcard" arg twice to
the "ipv[46]_rcv_saddr_equal(..., match_wildcard, match_wildcard)".

Cc: Josef Bacik <jbacik@fb.com>
Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

__netif_receive_skb_core: pass skb by reference

[ Upstream commit c0bbbdc32febd4f034ecbf3ea17865785b2c0652 ]

__netif_receive_skb_core may change the skb pointer passed into it (e.g.
in rx_handler). The original skb may be freed as a result of this
operation.

The callers of __netif_receive_skb_core may further process original skb
by using pt_prev pointer returned by __netif_receive_skb_core thus
leading to unpleasant effects.

The solution is to pass skb by reference into __netif_receive_skb_core.

v2: Added Fixes tag and comment regarding ppt_prev and skb invariant.

Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend

[ Upstream commit 4c64b83d03f4aafcdf710caad994cbc855802e74 ]

vlan_for_each() are required to be called with rtnl_lock taken, otherwise
ASSERT_RTNL() warning will be triggered - which happens now during System
resume from suspend:
  cpsw_suspend()
  |- cpsw_ndo_stop()
    |- __hw_addr_ref_unsync_dev()
      |- cpsw_purge_all_mc()
         |- vlan_for_each()
            |- ASSERT_RTNL();

Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls.

Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mt7530: fix roaming from DSA user ports

[ Upstream commit 5e5502e012b8129e11be616acb0f9c34bc8f8adb ]

When a client moves from a DSA user port to a software port in a bridge,
it cannot reach any other clients that connected to the DSA user ports.
That is because SA learning on the CPU port is disabled, so the switch
ignores the client's frames from the CPU port and still thinks it is at
the user port.

Fix it by enabling SA learning on the CPU port.

To prevent the switch from learning from flooding frames from the CPU
port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames,
and let the switch flood them instead of trapping to the CPU port.
Multicast frames still need to be trapped to the CPU port for snooping,
so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames
to disable SA learning.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: don't return invalid table id error when we fall back to PF_UNSPEC

[ Upstream commit 41b4bd986f86331efc599b9a3f5fb86ad92e9af9 ]

In case we can't find a ->dumpit callback for the requested
(family,type) pair, we fall back to (PF_UNSPEC,type). In effect, we're
in the same situation as if userspace had requested a PF_UNSPEC
dump. For RTM_GETROUTE, that handler is rtnl_dump_all, which calls all
the registered RTM_GETROUTE handlers.

The requested table id may or may not exist for all of those
families. commit ae677bbb4441 ("net: Don't return invalid table id
error when dumping all families") fixed the problem when userspace
explicitly requests a PF_UNSPEC dump, but missed the fallback case.

For example, when we pass ipv6.disable=1 to a kernel with
CONFIG_IP_MROUTE=y and CONFIG_IP_MROUTE_MULTIPLE_TABLES=y,
the (PF_INET6, RTM_GETROUTE) handler isn't registered, so we end up in
rtnl_dump_all, and listing IPv6 routes will unexpectedly print:

  # ip -6 r
  Error: ipv4: MR table does not exist.
  Dump terminated

commit ae677bbb4441 introduced the dump_all_families variable, which
gets set when userspace requests a PF_UNSPEC dump. However, we can't
simply set the family to PF_UNSPEC in rtnetlink_rcv_msg in the
fallback case to get dump_all_families == true, because some messages
types (for example RTM_GETRULE and RTM_GETNEIGH) only register the
PF_UNSPEC handler and use the family to filter in the kernel what is
dumped to userspace. We would then export more entries, that userspace
would have to filter. iproute does that, but other programs may not.

Instead, this patch removes dump_all_families and updates the
RTM_GETROUTE handlers to check if the family that is being dumped is
their own. When it's not, which covers both the intentional PF_UNSPEC
dumps (as dump_all_families did) and the fallback case, ignore the
missing table id error.

Fixes: cb167893f41e ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: fix usage as DSA master, try 3

[ Upstream commit 5d14c304bfc14b4fd052dc83d5224376b48f52f0 ]

The dpaa-eth driver probes on compatible string for the MAC node, and
the fman/mac.c driver allocates a dpaa-ethernet platform device that
triggers the probing of the dpaa-eth net device driver.

All of this is fine, but the problem is that the struct device of the
dpaa_eth net_device is 2 parents away from the MAC which can be
referenced via of_node. So of_find_net_device_by_node can't find it, and
DSA switches won't be able to probe on top of FMan ports.

It would be a bit silly to modify a core function
(of_find_net_device_by_node) to look for dev->parent->parent->of_node
just for one driver. We're just 1 step away from implementing full
recursion.

Actually there have already been at least 2 previous attempts to make
this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
  https://patchwork.ozlabs.org/project/netdev/cover/1508178970-28945-1-git-send-email-madalin.bucur@nxp.com/
  (I couldn't really figure out which one was supposed to solve the
  problem and how).

Point being, it looks like this is still pretty much a problem today.
On T1040, the /sys/class/net/eth0 symlink currently points to

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0

which pretty much illustrates the problem. The closest of_node we've got
is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000,
which is what we'd like to be able to reference from DSA as host port.

For of_find_net_device_by_node to find the eth0 port, we would need the
parent of the eth0 net_device to not be the "dpaa-ethernet" platform
device, but to point 1 level higher, aka the "fsl,fman-memac" node
directly. The new sysfs path would look like this:

../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0

And this is exactly what SET_NETDEV_DEV does. It sets the parent of the
net_device. The new parent has an of_node associated with it, and
of_dev_node_match already checks for the of_node of the device or of its
parent.

Fixes: a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
Fixes: c6e26ea8c893 ("dpaa_eth: change device used")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ax25: fix setsockopt(SO_BINDTODEVICE)

[ Upstream commit 687775cec056b38a4c8f3291e0dd7a9145f7b667 ]

syzbot was able to trigger this trace [1], probably by using
a zero optlen.

While we are at it, cap optlen to IFNAMSIZ - 1 instead of IFNAMSIZ.

[1]
BUG: KMSAN: uninit-value in strnlen+0xf9/0x170 lib/string.c:569
CPU: 0 PID: 8807 Comm: syz-executor483 Not tainted 5.7.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
strnlen+0xf9/0x170 lib/string.c:569
dev_name_hash net/core/dev.c:207 [inline]
netdev_name_node_lookup net/core/dev.c:277 [inline]
__dev_get_by_name+0x75/0x2b0 net/core/dev.c:778
ax25_setsockopt+0xfa3/0x1170 net/ax25/af_ax25.c:654
__compat_sys_setsockopt+0x4ed/0x910 net/compat.c:403
__do_compat_sys_setsockopt net/compat.c:413 [inline]
__se_compat_sys_setsockopt+0xdd/0x100 net/compat.c:410
__ia32_compat_sys_setsockopt+0x62/0x80 net/compat.c:410
do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
do_fast_syscall_32+0x3bf/0x6d0 arch/x86/entry/common.c:398
entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f57dd9
Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000ffae8c1c EFLAGS: 00000217 ORIG_RAX: 000000000000016e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000101
RDX: 0000000000000019 RSI: 0000000020000000 RDI: 0000000000000004
RBP: 0000000000000012 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Local variable ----devname@ax25_setsockopt created at:
ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536
ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.4.43

sched/fair: Fix enqueue_task_fair() warning some more

[ Upstream commit b34cb07dde7c2346dec73d053ce926aeaa087303 ]

sched/fair: Fix enqueue_task_fair warning some more

The recent patch, fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
did not fully resolve the issues with the rq->tmp_alone_branch !=
&rq->leaf_cfs_rq_list warning in enqueue_task_fair. There is a case where
the first for_each_sched_entity loop exits due to on_rq, having incompletely
updated the list. In this case the second for_each_sched_entity loop can
further modify se. The later code to fix up the list management fails to do
what is needed because se does not point to the sched_entity which broke out
of the first loop. The list is not fixed up because the throttled parent was
already added back to the list by a task enqueue in a parallel child hierarchy.

Address this by calling list_add_leaf_cfs_rq if there are throttled parents
while doing the second for_each_sched_entity loop.

Fixes: fe61468b2cb ("sched/fair: Fix enqueue_task_fair warning")
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200512135222.GC2201@lorien.usersys.redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Fix reordering of enqueue/dequeue_task_fair()

[ Upstream commit 5ab297bab984310267734dfbcc8104566658ebef ]

Even when a cgroup is throttled, the group se of a child cgroup can still
be enqueued and its gse->on_rq stays true. When a task is enqueued on such
child, we still have to update the load_avg and increase
h_nr_running of the throttled cfs. Nevertheless, the 1st
for_each_sched_entity() loop is skipped because of gse->on_rq == true and the
2nd loop because the cfs is throttled whereas we have to update both
load_avg with the old h_nr_running and increase h_nr_running in such case.

The same sequence can happen during dequeue when se moves to parent before
breaking in the 1st loop.

Note that the update of load_avg will effectively happen only once in order
to sync up to the throttled time. Next call for updating load_avg will stop
early because the clock stays unchanged.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 6d4d22468dae ("sched/fair: Reorder enqueue/dequeue_task_fair path")
Link: https://lkml.kernel.org/r/20200306084208.12583-1-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Reorder enqueue/dequeue_task_fair path

[ Upstream commit 6d4d22468dae3d8757af9f8b81b848a76ef4409d ]

The walk through the cgroup hierarchy during the enqueue/dequeue of a task
is split in 2 distinct parts for throttled cfs_rq without any added value
but making code less readable.

Change the code ordering such that everything related to a cfs_rq
(throttled or not) will be done in the same loop.

In addition, the same steps ordering is used when updating a cfs_rq:

- update_load_avg
- update_cfs_group
- update *h_nr_running

This reordering enables the use of h_nr_running in PELT algorithm.

No functional and performance changes are expected and have been noticed
during tests.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: "Dietmar Eggemann <dietmar.eggemann@arm.com>"
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Link: https://lore.kernel.org/r/20200224095223.13361-5-mgorman@techsingularity.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm: check event log version before reading final events

[ Upstream commit b4f1874c62168159fdb419ced4afc77c1b51c475 ]

This fixes the boot issues since 5.3 on several Dell models when the TPM
is enabled. Depending on the exact grub binary, booting the kernel would
freeze early, or just report an error parsing the final events log.

We get an event log in the SHA-1 format, which doesn't have a
tcg_efi_specid_event_head in the first event, and there is a final events
table which doesn't match the crypto agile format.
__calc_tpm2_event_size reads bad "count" and "efispecid->num_algs", and
either fails, or loops long enough for the machine to be appear frozen.

So we now only parse the final events table, which is per the spec always
supposed to be in the crypto agile format, when we got a event log in this
format.

Fixes: c46f3405692de ("tpm: Reserve the TPM final events table")
Fixes: 166a2809d65b2 ("tpm: Don't duplicate events from the final event log in the TCG2 log")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1779611
Signed-off-by: Loïc Yhuel <loic.yhuel@gmail.com>
Link: https://lore.kernel.org/r/20200512040113.277768-1-loic.yhuel@gmail.com
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Matthew Garrett <mjg59@google.com>
[ardb: warn when final events table is missing or in the wrong format]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix ack discard

[ Upstream commit 441fdee1eaf050ef0040bde0d7af075c1c6a6d8b ]

The Rx protocol has a "previousPacket" field in it that is not handled in
the same way by all protocol implementations.  Sometimes it contains the
serial number of the last DATA packet received, sometimes the sequence
number of the last DATA packet received and sometimes the highest sequence
number so far received.

AF_RXRPC is using this to weed out ACKs that are out of date (it's possible
for ACK packets to get reordered on the wire), but this does not work with
OpenAFS which will just stick the sequence number of the last packet seen
into previousPacket.

The issue being seen is that big AFS FS.StoreData RPC (eg. of ~256MiB) are
timing out when partly sent.  A trace was captured, with an additional
tracepoint to show ACKs being discarded in rxrpc_input_ack().  Here's an
excerpt showing the problem.

52873.203230: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 0002449c q=00024499 fl=09

A DATA packet with sequence number 00024499 has been transmitted (the "q="
field).

...
52873.243296: rxrpc_rx_ack: c=000004ae 00012a2b DLY r=00024499 f=00024497 p=00024496 n=0
52873.243376: rxrpc_rx_ack: c=000004ae 00012a2c IDL r=0002449b f=00024499 p=00024498 n=0
52873.243383: rxrpc_rx_ack: c=000004ae 00012a2d OOS r=0002449d f=00024499 p=0002449a n=2

The Out-Of-Sequence ACK indicates that the server didn't see DATA sequence
number 00024499, but did see seq 0002449a (previousPacket, shown as "p=",
skipped the number, but firstPacket, "f=", which shows the bottom of the
window is set at that point).

52873.252663: rxrpc_retransmit: c=000004ae q=24499 a=02 xp=14581537
52873.252664: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244bc q=00024499 fl=0b *RETRANS*

The packet has been retransmitted.  Retransmission recurs until the peer
says it got the packet.

52873.271013: rxrpc_rx_ack: c=000004ae 00012a31 OOS r=000244a1 f=00024499 p=0002449e n=6

More OOS ACKs indicate that the other packets that are already in the
transmission pipeline are being received.  The specific-ACK list is up to 6
ACKs and NAKs.

...
52873.284792: rxrpc_rx_ack: c=000004ae 00012a49 OOS r=000244b9 f=00024499 p=000244b6 n=30
52873.284802: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=63505500
52873.284804: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c2 q=00024499 fl=0b *RETRANS*
52873.287468: rxrpc_rx_ack: c=000004ae 00012a4a OOS r=000244ba f=00024499 p=000244b7 n=31
52873.287478: rxrpc_rx_ack: c=000004ae 00012a4b OOS r=000244bb f=00024499 p=000244b8 n=32

At this point, the server's receive window is full (n=32) with presumably 1
NAK'd packet and 31 ACK'd packets.  We can't transmit any more packets.

52873.287488: rxrpc_retransmit: c=000004ae q=24499 a=0a xp=61327980
52873.287489: rxrpc_tx_data: c=000004ae DATA ed1a3584:00000002 000244c3 q=00024499 fl=0b *RETRANS*
52873.293850: rxrpc_rx_ack: c=000004ae 00012a4c DLY r=000244bc f=000244a0 p=00024499 n=25

And now we've received an ACK indicating that a DATA retransmission was
received.  7 packets have been processed (the occupied part of the window
moved, as indicated by f= and n=).

52873.293853: rxrpc_rx_discard_ack: c=000004ae r=00012a4c 000244a0<00024499 00024499<000244b8

However, the DLY ACK gets discarded because its previousPacket has gone
backwards (from p=000244b8, in the ACK at 52873.287478 to p=00024499 in the
ACK at 52873.293850).

We then end up in a continuous cycle of retransmit/discard.  kafs fails to
update its window because it's discarding the ACKs and can't transmit an
extra packet that would clear the issue because the window is full.
OpenAFS doesn't change the previousPacket value in the ACKs because no new
DATA packets are received with a different previousPacket number.

Fix this by altering the discard check to only discard an ACK based on
previousPacket if there was no advance in the firstPacket.  This allows us
to transmit a new packet which will cause previousPacket to advance in the
next ACK.

The check, however, needs to allow for the possibility that previousPacket
may actually have had the serial number placed in it instead - in which
case it will go outside the window and we should ignore it.

Fixes: 1a2391c30c0b ("rxrpc: Fix detection of out of order acks")
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Trace discarded ACKs

[ Upstream commit d1f129470e6cb79b8b97fecd12689f6eb49e27fe ]

Add a tracepoint to track received ACKs that are discarded due to being
outside of the Tx window.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: stm32-dfsdm: fix device used to request dma

[ Upstream commit b455d06e6fb3c035711e8aab1ca18082ccb15d87 ]

DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink

Fix this by using device struct from platform device to request dma chan.

Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()

[ Upstream commit a9ab624edd9186fbad734cfe5d606a6da3ca34db ]

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Olivier Moysan <olivier.moysan@st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: stm32-adc: fix device used to request dma

[ Upstream commit 52cd91c27f3908b88e8b25aed4a4d20660abcc45 ]

DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink

Fix this by using device struct from platform device to request dma chan.

Fixes: 2763ea0585c99 ("iio: adc: stm32: add optional dma support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: stm32-adc: Use dma_request_chan() instead dma_request_slave_channel()

[ Upstream commit 735404b846dffcb320264f62b76e6f70012214dd ]

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/unwind/orc: Fix unwind_get_return_address_ptr() for inactive tasks

commit 187b96db5ca79423618dfa29a05c438c34f9e1f0 upstream.

Normally, show_trace_log_lvl() scans the stack, looking for text
addresses to print.  In parallel, it unwinds the stack with
unwind_next_frame().  If the stack address matches the pointer returned
by unwind_get_return_address_ptr() for the current frame, the text
address is printed normally without a question mark.  Otherwise it's
considered a breadcrumb (potentially from a previous call path) and it's
printed with a question mark to indicate that the address is unreliable
and typically can be ignored.

Since the following commit:

  f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")

... for inactive tasks, show_trace_log_lvl() prints *only* unreliable
addresses (prepended with '?').

That happens because, for the first frame of an inactive task,
unwind_get_return_address_ptr() returns the wrong return address
pointer: one word *below* the task stack pointer.  show_trace_log_lvl()
starts scanning at the stack pointer itself, so it never finds the first
'reliable' address, causing only guesses to being printed.

The first frame of an inactive task isn't a normal stack frame.  It's
actually just an instance of 'struct inactive_task_frame' which is left
behind by __switch_to_asm().  Now that this inactive frame is actually
exposed to callers, fix unwind_get_return_address_ptr() to interpret it
properly.

Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

flow_dissector: Drop BPF flow dissector prog ref on netns cleanup

commit 5cf65922bb15279402e1e19b5ee8c51d618fa51f upstream.

When attaching a flow dissector program to a network namespace with
bpf(BPF_PROG_ATTACH, ...) we grab a reference to bpf_prog.

If netns gets destroyed while a flow dissector is still attached, and there
are no other references to the prog, we leak the reference and the program
remains loaded.

Leak can be reproduced by running flow dissector tests from selftests/bpf:

  # bpftool prog list
  # ./test_flow_dissector.sh
  ...
  selftests: test_flow_dissector [PASS]
  # bpftool prog list
  4: flow_dissector  name _dissect  tag e314084d332a5338  gpl
          loaded_at 2020-05-20T18:50:53+0200  uid 0
          xlated 552B  jited 355B  memlock 4096B  map_ids 3,4
          btf_id 4
  #

Fix it by detaching the flow dissector program when netns is going away.

Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20200521083435.560256-1-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kexec_file: fix initrd location for kdump kernel

commit 70b690547d5ea1a3d135a4cc39cd1e08246d0c3a upstream.

initrd_start must not point at the location the initrd is loaded into
the crashkernel memory but at the location it will be after the
crashkernel memory is swapped with the memory at 0.

Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader")
Reported-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Tested-by: Lianbo Jiang <lijiang@redhat.com>
Link: https://lore.kernel.org/r/20200512193956.15ae3f23@laptop2-ibm.local
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix a memory leak in rxkad_verify_response()

commit f45d01f4f30b53c3a0a1c6c1c154acb7ff74ab9f upstream.

A ticket was not released after a call of the function
"rxkad_decrypt_ticket" failed. Thus replace the jump target
"temporary_error_free_resp" by "temporary_error_free_ticket".

Fixes: 8c2f826dc3631 ("rxrpc: Don't put crypto buffers on the stack")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix the excessive initial retransmission timeout

commit c410bf01933e5e09d142c66c3df9ad470a7eec13 upstream.

rxrpc currently uses a fixed 4s retransmission timeout until the RTT is
sufficiently sampled.  This can cause problems with some fileservers with
calls to the cache manager in the afs filesystem being dropped from the
fileserver because a packet goes missing and the retransmission timeout is
greater than the call expiry timeout.

Fix this by:

(1) Copying the RTT/RTO calculation code from Linux's TCP implementation
     and altering it to fit rxrpc.

(2) Altering the various users of the RTT to make use of the new SRTT
     value.

(3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO
     value instead (which is needed in jiffies), along with a backoff.

Notes:

(1) rxrpc provides RTT samples by matching the serial numbers on outgoing
     DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets
     against the reference serial number in incoming REQUESTED ACK and
     PING-RESPONSE ACK packets.

(2) Each packet that is transmitted on an rxrpc connection gets a new
     per-connection serial number, even for retransmissions, so an ACK can
     be cross-referenced to a specific trigger packet.  This allows RTT
     information to be drawn from retransmitted DATA packets also.

(3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than
     on an rxrpc_call because many RPC calls won't live long enough to
     generate more than one sample.

(4) The calculated SRTT value is in units of 8ths of a microsecond rather
     than nanoseconds.

The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers.

Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kasan: disable branch tracing for core runtime

commit 33cd65e73abd693c00c4156cf23677c453b41b3b upstream.

During early boot, while KASAN is not yet initialized, it is possible to
enter reporting code-path and end up in kasan_report().

While uninitialized, the branch there prevents generating any reports,
however, under certain circumstances when branches are being traced
(TRACE_BRANCH_PROFILING), we may recurse deep enough to cause kernel
reboots without warning.

To prevent similar issues in future, we should disable branch tracing
for the core runtime.

[elver@google.com: remove duplicate DISABLE_BRANCH_PROFILING, per Qian Cai]
Link: https://lore.kernel.org/lkml/20200517011732.GE24705@shao2-debian/
Link: http://lkml.kernel.org/r/20200522075207.157349-1-elver@google.com
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r//20200517011732.GE24705@shao2-debian/
Link: http://lkml.kernel.org/r/20200519182459.87166-1-elver@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rapidio: fix an error in get_user_pages_fast() error handling

commit ffca476a0a8d26de767cc41d62b8ca7f540ecfdd upstream.

In the case of get_user_pages_fast() returning fewer pages than
requested, rio_dma_transfer() does not quite do the right thing. It
attempts to release all the pages that were requested, rather than just
the pages that were pinned.

Fix the error handling so that only the pages that were successfully
pinned are released.

Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200517235620.205225-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

device-dax: don't leak kernel memory to user space after unloading kmem

commit 60858c00e5f018eda711a3aa84cf62214ef62d61 upstream.

Assume we have kmem configured and loaded:

  [root@localhost ~]# cat /proc/iomem
  ...
  140000000-33fffffff : Persistent Memory$
    140000000-1481fffff : namespace0.0
    150000000-33fffffff : dax0.0
      150000000-33fffffff : System RAM

Assume we try to unload kmem. This force-unloading will work, even if
memory cannot get removed from the system.

  [root@localhost ~]# rmmod kmem
  [   86.380228] removing memory fails, because memory [0x0000000150000000-0x0000000157ffffff] is onlined
  ...
  [   86.431225] kmem dax0.0: DAX region [mem 0x150000000-0x33fffffff] cannot be hotremoved until the next reboot

Now, we can reconfigure the namespace:

  [root@localhost ~]# ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax
  [  131.409351] nd_pmem namespace0.0: could not reserve region [mem 0x140000000-0x33fffffff]dax
  [  131.410147] nd_pmem: probe of namespace0.0 failed with error -16namespace0.0 --mode=devdax
  ...

This fails as expected due to the busy memory resource, and the memory
cannot be used.  However, the dax0.0 device is removed, and along its
name.

The name of the memory resource now points at freed memory (name of the
device):

  [root@localhost ~]# cat /proc/iomem
  ...
  140000000-33fffffff : Persistent Memory
    140000000-1481fffff : namespace0.0
    150000000-33fffffff : �_�^7_��/_��wR��WQ��^�� ...
    150000000-33fffffff : System RAM

We have to make sure to duplicate the string.  While at it, remove the
superfluous setting of the name and fixup a stale comment.

Fixes: 9f960da72b25 ("device-dax: "Hotremove" persistent memory that is used like normal RAM")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org> [5.3]
Link: http://lkml.kernel.org/r/20200508084217.9160-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kaslr: add support for R_390_JMP_SLOT relocation type

commit 4c1cbcbd6c56c79de2c07159be4f55386bb0bef2 upstream.

With certain kernel configurations, the R_390_JMP_SLOT relocation type
might be generated, which is not expected by the KASLR relocation code,
and the kernel stops with the message "Unknown relocation type".

This was found with a zfcpdump kernel config, where CONFIG_MODULES=n
and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined
__weak symbols in virt/kvm/vfio.c, which results in the generation
of R_390_JMP_SLOT relocation types.

Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT.

Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/pci: Fix s390_mmio_read/write with MIO

commit f058599e22d59e594e5aae1dc10560568d8f4a8b upstream.

The s390_mmio_read/write syscalls are currently broken when running with
MIO.

The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed
similiarly to normal load/store instructions and do address translation
in the current address space. That means inside the kernel they are
aware of mappings into kernel address space while outside the kernel
they use user space mappings (usually created through mmap'ing a PCI
device file).

Now when existing user space applications use the s390_pci_mmio_write
and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped
into user space so as to be usable with the new instructions without
needing a syscall. Accessing these addresses with the old instructions
as done currently leads to a kernel panic.

Also, for such a user space mapping there may not exist an equivalent
kernel space mapping which means we can't just use the new instructions
in kernel space.

Instead of replicating user mappings in the kernel which then might
collide with other mappings, we can conceptually execute the new
instructions as if executed by the user space application using the
secondary address space. This even allows us to directly store to the
user pointer without the need for copy_to/from_user().

Cc: stable@vger.kernel.org
Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipack: tpci200: fix error return code in tpci200_register()

commit 133317479f0324f6faaf797c4f5f3e9b1b36ce35 upstream.

Fix to return negative error code -ENOMEM from the ioremap() error handling
case instead of 0, as done elsewhere in this function.

Fixes: 43986798fd50 ("ipack: add error handling for ioremap_nocache")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Link: https://lore.kernel.org/r/20200507094237.13599-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: release me_cl object reference

commit fc9c03ce30f79b71807961bfcb42be191af79873 upstream.

Allow me_cl object to be freed by releasing the reference
that was acquired by one of the search functions:
__mei_me_cl_by_uuid_id() or __mei_me_cl_by_uuid()

Cc: <stable@vger.kernel.org>
Reported-by: 亿一 <teroincn@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200512223140.32186-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: add missing spin_lock_init for SiFive serial console

commit 17b4efdf4e4867079012a48ca10d965fe9d68822 upstream.

An uninitialised spin lock for sifive serial console raises a bad
magic spin_lock error as reported and discussed here [1].
Initialising the spin lock resolves the issue.

The fix is tested on HiFive Unleashed A00 board with Linux 5.7-rc4
and OpenSBI v0.7

[1] https://lore.kernel.org/linux-riscv/b9fe49483a903f404e7acc15a6efbef756db28ae.camel@wdc.com

Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART")
Reported-by: Atish Patra <Atish.Patra@wdc.com>
Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1589019852-21505-2-git-send-email-sagar.kadam@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: rtsx: Add short delay after exit from ASPM

commit 7a839dbab1be59f5ed3b3b046de29e166784c9b4 upstream.

DMA transfers to and from the SD card stall for 10 seconds and run into
timeout on RTS5260 card readers after ASPM was enabled.

Adding a short msleep after disabling ASPM fixes the issue on several
Dell Precision 7530/7540 systems I tested.

This function is only called when waking up after the chip went into
power-save after not transferring data for a few seconds. The added
msleep does therefore not change anything in data transfer speed or
induce any excessive waiting while data transfers are running, or the
chip is sleeping. Only the transition from sleep to active is affected.

Signed-off-by: Klaus Doth <kdlnx@doth.eu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: ti-ads8344: Fix channel selection

commit bcfa1e253d2e329e1ebab5c89f3c73f6dd17606c upstream.

During initial submission the selection of the channel was done using
the scan_index member of the iio_chan_spec structure. It was an abuse
because this member is supposed to be used with a buffer so it was
removed.

However there was still the need to be able to known how to select a
channel, the correct member to store this information is address.

Thanks to this it is possible to select any other channel than the
channel 0.

Fixes: 8dd2d7c0fed7 ("iio: adc: Add driver for the TI ADS8344 A/DC chips")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'

commit aad4742fbf0a560c25827adb58695a4497ffc204 upstream.

A call to 'vf610_dac_exit()' is missing in an error handling path.

Fixes: 1b983bf42fad ("iio: dac: vf610_dac: Add IIO DAC driver for Vybrid SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: sca3000: Remove an erroneous 'get_device()'

commit 928edefbc18cd8433f7df235c6e09a9306e7d580 upstream.

This looks really unusual to have a 'get_device()' hidden in a 'dev_err()'
call.
Remove it.

While at it add a missing \n at the end of the message.

Fixes: 574fb258d636 ("Staging: IIO: VTI sca3000 series accelerometer driver (spi)")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: Fix uninitialized scalar variable

commit 34625c1931f8204c234c532b446b9f53c69f4b68 upstream.

In the "gb_tty_set_termios" function the "newline" variable is declared
but not initialized. So the "flow_control" member is not initialized and
the OR / AND operations with itself results in an undefined value in
this member.

The purpose of the code is to set the flow control type, so remove the
OR / AND self operator and set the value directly.

Addresses-Coverity-ID: 1374016 ("Uninitialized scalar variable")
Fixes: e55c25206d5c9 ("greybus: uart: Handle CRTSCTS flag in termios")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200510101426.23631-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: kpc2000: fix error return code in kp2000_pcie_probe()

commit b17884ccf29e127b16bba6aea1438c851c9f5af1 upstream.

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function. Also
removed var 'rv' since we can use 'err' instead.

Fixes: 7dc7967fc39a ("staging: kpc2000: add initial set of Daktronics drivers")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200506134735.102041-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: ad2s1210: Fix SPI reading

commit 5e4f99a6b788047b0b8a7496c2e0c8f372f6edf2 upstream.

If the serial interface is used, the 8-bit address should be latched using
the rising edge of the WR/FSYNC signal.

This basically means that a CS change is required between the first byte
sent, and the second one.
This change splits the single-transfer transfer of 2 bytes into 2 transfers
with a single byte, and CS change in-between.

Note fixes tag is not accurate, but reflects a point beyond which there
are too many refactors to make backporting straight forward.

Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.")
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: fdp1: Fix R-Car M3-N naming in debug message

[ Upstream commit c05b9d7b9f3ece2831e4e4829f10e904df296df8 ]

The official name is "R-Car M3-N", not "R-Car M3N".

Fixes: 4e8c120de9268fc2 ("media: fdp1: Support M3N and E3 platforms")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "gfs2: Don't demote a glock until its revokes are written"

[ Upstream commit b14c94908b1b884276a6608dea3d0b1b510338b7 ]

This reverts commit df5db5f9ee112e76b5202fbc331f990a0fc316d6.

This patch fixes a regression: patch df5db5f9ee112 allowed function
run_queue() to bypass its call to do_xmote() if revokes were queued for
the glock. That's wrong because its call to do_xmote() is what is
responsible for calling the go_sync() glops functions to sync both
the ail list and any revokes queued for it. By bypassing the call,
gfs2 could get into a stand-off where the glock could not be demoted
until its revokes are written back, but the revokes would not be
written back because do_xmote() was never called.

It "sort of" works, however, because there are other mechanisms like
the log flush daemon (logd) that can sync the ail items and revokes,
if it deems it necessary. The problem is: without file system pressure,
it might never deem it necessary.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: Remove debug info from kallsyms linking

[ Upstream commit af73d78bd384aa9b8789aa6e7ddbb165f971276f ]

When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.

Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.
Additionally move "info BTF" to the correct place since commit
8959e39272d6 ("kbuild: Parameterize kallsyms generation and correct
reporting"), which added "info LD ..." to vmlinux_link calls.

For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Avoid setting bpf insns pages read-only when prog is jited

[ Upstream commit e1608f3fa857b600045b6df7f7dadc70eeaa4496 ]

For the case where the interpreter is compiled out or when the prog is jited
it is completely unnecessary to set the BPF insn pages as read-only. In fact,
on frequent churn of BPF programs, it could lead to performance degradation of
the system over time since it would break the direct map down to 4k pages when
calling set_memory_ro() for the insn buffer on x86-64 / arm64 and there is no
reverse operation. Thus, avoid breaking up large pages for data maps, and only
limit this to the module range used by the JIT where it is necessary to set
the image read-only and executable.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191129222911.3710-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>