nvmet-tcp: fix lockdep complaint on nvmet_tcp_wq flush during queue teardown

[ Upstream commit 533d2e8b4d5e4c89772a0adce913525fb86cbbee ]

We probably need nvmet_tcp_wq to have MEM_RECLAIM as we are
sending/receiving for the socket from works on this workqueue.
Also this eliminates lockdep complaints:
--
[ 6174.010200] workqueue: WQ_MEM_RECLAIM
nvmet-wq:nvmet_tcp_release_queue_work [nvmet_tcp] is flushing
!WQ_MEM_RECLAIM nvmet_tcp_wq:nvmet_tcp_io_work [nvmet_tcp]
[ 6174.010216] WARNING: CPU: 20 PID: 14456 at kernel/workqueue.c:2628
check_flush_dependency+0x110/0x14c

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: Notify sysfs sync_completed in md_reap_sync_thread()

[ Upstream commit 9973f0fa7d20269fe6fefe6333997fb5914449c1 ]

The mdadm test 07layouts randomly produces a kernel hung task deadlock.
The deadlock is caused by the suspend_lo/suspend_hi files being set by
the mdadm background process during reshape and not being cleared
because the process hangs. (Leaving aside the issue of the fragility of
freezing kernel tasks by buggy userspace processes...)

When the background mdadm process hangs it, is waiting (without a
timeout) on a change to the sync_completed file signalling that the
reshape has completed. The process is woken up a couple times when
the reshape finishes but it is woken up before MD_RECOVERY_RUNNING
is cleared so sync_completed_show() reports 0 instead of "none".

To fix this, notify the sysfs file in md_reap_sync_thread() after
MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes
it to continue and write to suspend_lo/suspend_hi to allow IO to
continue.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacks

[ Upstream commit f2812227bb07e2eaee74253f11cea1576945df31 ]

The exynos-pcie driver called phy_power_on() before phy_init() for some
historical reasons. However the generic PHY framework assumes that the
proper sequence is to call phy_init() first, then phy_power_on(). The
operations done by both functions should be considered as one action and as
such they are called by the exynos-pcie driver (without doing anything
between them). The initialization is just a sequence of register writes,
which cannot be altered without breaking the hardware operation.

To match the generic PHY framework requirement, simply move all register
writes to the phy_init()/phy_exit() and drop power_on()/power_off()
callbacks. This way the driver will also work with the old (incorrect)
PHY initialization call sequence.

Link: https://lore.kernel.org/r/20220628220409.26545-1-m.szyprowski@samsung.com
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openrisc: io: Define iounmap argument as volatile

[ Upstream commit 52e0ea900202d23843daee8f7089817e81dd3dd7 ]

When OpenRISC enables PCI it allows for more drivers to be compiled
resulting in exposing the following with -Werror.

    drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':
    drivers/video/fbdev/riva/fbdev.c:2062:42: error:
    passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type

    drivers/video/fbdev/nvidia/nvidia.c: In function 'nvidiafb_probe':
    drivers/video/fbdev/nvidia/nvidia.c:1414:20: error:
    passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type

    drivers/scsi/aic7xxx/aic7xxx_osm.c: In function 'ahc_platform_free':
    drivers/scsi/aic7xxx/aic7xxx_osm.c:1231:41: error:
    passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type

Most architectures define the iounmap argument to be volatile.  To fix this
issue we do the same for OpenRISC.  This patch must go before PCI is enabled on
OpenRISC to avoid any compile failures.

Link: https://lore.kernel.org/lkml/20220729033728.GA2195022@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed

[ Upstream commit 1e42f82cbec7b2cc4873751e7791e6611901c5fc ]

It's not allowed to quit remove early without cleaning up completely.
Otherwise this results in resource leaks that probably yield graver
problems later. Here for example some tasklets might survive the lifetime
of the sprd-dma device and access sdev which is freed after .remove()
returns.

As none of the device freeing requires an active device, just ignore the
return value of pm_runtime_get_sync().

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/20220721204054.323602-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/kprobe: Do not test for GRP/ without event failures

[ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ]

A new feature is added where kprobes (and other probes) do not need to
explicitly state the event name when creating a probe. The event name will
come from what is being attached.

That is:

  # echo 'p:foo/ vfs_read' > kprobe_events

Will no longer error, but instead create an event:

  # cat kprobe_events
 p:foo/p_vfs_read_0 vfs_read

This should not be tested as an error case anymore. Remove it from the
selftest as now this feature "breaks" the selftest as it no longer fails
as expected.

Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan@quicinc.com/
Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

csky/kprobe: reclaim insn_slot on kprobe unregistration

[ Upstream commit a2310c74d418deca0f1d749c45f1f43162510f51 ]

On kprobe registration kernel allocate one insn_slot for new kprobe,
but it forget to reclaim the insn_slot on unregistration, leading to a
potential leakage.

Reported-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Limit the number of calls to each tasklet

[ Upstream commit eff6d998ca297cb0b2e53b032a56cf8e04dd8b17 ]

Limit the maximum number of calls to each tasklet from rxe_do_task()
before yielding the cpu. When the limit is reached reschedule the tasklet
and exit the calling loop. This patch prevents one tasklet from consuming
100% of a cpu core and causing a deadlock or soft lockup.

Link: https://lore.kernel.org/r/20220630190425.2251-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dw-axi-dmac: ignore interrupt if no descriptor

[ Upstream commit 820f5ce999d2f99961e88c16d65cd26764df0590 ]

If the channel has no descriptor and the interrupt is raised then the
kernel will OOPS. Check the result of vchan_next_desc() in the handler
axi_chan_block_xfer_complete() to avoid the error happening.

Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220708170153.269991-4-ben.dooks@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: dw-axi-dmac: do not print NULL LLI during error

[ Upstream commit 86cb0defe0e275453bc39e856bb523eb425a6537 ]

During debugging we have seen an issue where axi_chan_dump_lli()
is passed a NULL LLI pointer which ends up causing an OOPS due
to trying to get fields from it. Simply print NULL LLI and exit
to avoid this.

Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Link: https://lore.kernel.org/r/20220708170153.269991-3-ben.dooks@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setups

[ Upstream commit dda520d07b95072a0b63f6c52a8eb566d08ea897 ]

QEMU has a -no-reboot option, which halts instead of reboots when the
guest asks to reboot. This is invaluable when used with
CONFIG_PANIC_TIMEOUT=-1 (and panic_on_warn), because it allows panics
and warnings to be caught immediately in CI. Implement this in UML too,
by way of a basic setup param.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ACPI: Guard ARM64-specific mcfg_quirks

[ Upstream commit 40a6cc141b4b9580de140bcb3e893445708acc5d ]

Guard ARM64-specific quirks with CONFIG_ARM64 to avoid build errors,
since mcfg_quirks will be shared by more than one architectures.

Link: https://lore.kernel.org/r/20220714124216.1489304-2-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: Fix a memory leak in an error handling path

[ Upstream commit 3a15b45b5454da862376b5d69a4967f5c6fa1368 ]

A bitmap_zalloc() must be balanced by a corresponding bitmap_free() in the
error handling path of afu_allocate_irqs().

Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ce5869418f5838187946eb6b11a52715a93ece3d.1657566849.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: intel: Check against matching data instead of ACPI companion

[ Upstream commit c551bd81d198bf1dcd4398d5454acdc0309dbe77 ]

In some cases we may get a platform device that has ACPI companion
which is different to the pin control described in the ACPI tables.
This is primarily happens when device is instantiated by board file.

In order to allow this device being enumerated, refactor
intel_pinctrl_get_soc_data() to check the matching data instead of
ACPI companion.

Reported-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: tmio: avoid glitches when resetting

[ Upstream commit 2e586f8a5b0ed4a525014a692923ac96f6647816 ]

If we reset because of an error, we need to preserve values for the
clock frequency. Otherwise, glitches may be seen on the bus.

To achieve that, we introduce a 'preserve' parameter to the reset
function and the IP core specific reset callbacks to handle everything
accordingly.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20220625131722.1397-1-wsa@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs/gaudi: mask constant value before cast

[ Upstream commit e3f49437a2e0221a387ecd192d742ae1434e1e3a ]

This fixes a sparse warning of
"cast truncates bits from constant value"

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

habanalabs/gaudi: fix shift out of bounds

[ Upstream commit 01622098aeb05a5efbb727199bbc2a4653393255 ]

When validating NIC queues, queue offset calculation must be
performed only for NIC queues.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: etm4x: avoid build failure with unrolled loops

[ Upstream commit 4d45bc82df667ad9e9cb8361830e54fc1264e993 ]

When the following configs are enabled:
* CORESIGHT
* CORESIGHT_SOURCE_ETM4X
* UBSAN
* UBSAN_TRAP

Clang fails assemble the kernel with the error:
<instantiation>:1:7: error: expected constant expression in '.inst' directive
.inst (0xd5200000|((((2) << 19) | ((1) << 16) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 7) & 0x7)) << 12) | ((((((((((0x160 + (i * 4))))) >> 2))) & 0xf)) << 8) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 4) & 0x7)) << 5)))|(.L__reg_num_x8))
      ^
drivers/hwtracing/coresight/coresight-etm4x-core.c:702:4: note: while in
macro instantiation
etm4x_relaxed_read32(csa, TRCCNTVRn(i));
^
drivers/hwtracing/coresight/coresight-etm4x.h:403:4: note: expanded from
macro 'etm4x_relaxed_read32'
read_etm4x_sysreg_offset((offset), false)))
^
drivers/hwtracing/coresight/coresight-etm4x.h:383:12: note: expanded
from macro 'read_etm4x_sysreg_offset'
__val = read_etm4x_sysreg_const_offset((offset));       \
        ^
drivers/hwtracing/coresight/coresight-etm4x.h:149:2: note: expanded from
macro 'read_etm4x_sysreg_const_offset'
READ_ETM4x_REG(ETM4x_OFFSET_TO_REG(offset))
^
drivers/hwtracing/coresight/coresight-etm4x.h:144:2: note: expanded from
macro 'READ_ETM4x_REG'
read_sysreg_s(ETM4x_REG_NUM_TO_SYSREG((reg)))
^
arch/arm64/include/asm/sysreg.h:1108:15: note: expanded from macro
'read_sysreg_s'
asm volatile(__mrs_s("%0", r) : "=r" (__val));                  \
             ^
arch/arm64/include/asm/sysreg.h:1074:2: note: expanded from macro '__mrs_s'
"       mrs_s " v ", " __stringify(r) "\n"                      \
 ^

Consider the definitions of TRCSSCSRn and TRCCNTVRn:
drivers/hwtracing/coresight/coresight-etm4x.h:56
 #define TRCCNTVRn(n)      (0x160 + (n * 4))
drivers/hwtracing/coresight/coresight-etm4x.h:81
 #define TRCSSCSRn(n)      (0x2A0 + (n * 4))

Where the macro parameter is expanded to i; a loop induction variable
from etm4_disable_hw.

When any compiler can determine that loops may be unrolled, then the
__builtin_constant_p check in read_etm4x_sysreg_offset() defined in
drivers/hwtracing/coresight/coresight-etm4x.h may evaluate to true. This
can lead to the expression `(0x160 + (i * 4))` being passed to
read_etm4x_sysreg_const_offset. Via the trace above, this is passed
through READ_ETM4x_REG, read_sysreg_s, and finally to __mrs_s where it
is string-ified and used directly in inline asm.

Regardless of which compiler or compiler options determine whether a
loop can or can't be unrolled, which determines whether
__builtin_constant_p evaluates to true when passed an expression using a
loop induction variable, it is NEVER safe to allow the preprocessor to
construct inline asm like:
  asm volatile (".inst (0x160 + (i * 4))" : "=r"(__val));
                                 ^ expected constant expression

Instead of read_etm4x_sysreg_offset() using __builtin_constant_p(), use
__is_constexpr from include/linux/const.h instead to ensure only
expressions that are valid integer constant expressions get passed
through to read_sysreg_s().

This is not a bug in clang; it's a potentially unsafe use of the macro
arguments in read_etm4x_sysreg_offset dependent on __builtin_constant_p.

Link: https://github.com/ClangBuiltLinux/linux/issues/1310
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220708231520.3958391-1-ndesaulniers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

gadgetfs: ep_io - wait until IRQ finishes

[ Upstream commit 04cb742d4d8f30dc2e83b46ac317eec09191c68e ]

after usb_ep_queue() if wait_for_completion_interruptible() is
interrupted we need to wait until IRQ gets finished.

Otherwise complete() from epio_complete() can corrupt stack.

Signed-off-by: Jozef Martiniak <jomajm@gmail.com>
Link: https://lore.kernel.org/r/20220708070645.6130-1-jomajm@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix possible memory leak when failing to issue CMF WQE

[ Upstream commit 2f67dc7970bce3529edce93a0a14234d88b3fcd5 ]

There is no corresponding free routine if lpfc_sli4_issue_wqe fails to
issue the CMF WQE in lpfc_issue_cmf_sync_wqe.

If ret_val is non-zero, then free the iocbq request structure.

Link: https://lore.kernel.org/r/20220701211425.2708-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Prevent buffer overflow crashes in debugfs with malformed user input

[ Upstream commit f8191d40aa612981ce897e66cda6a88db8df17bb ]

Malformed user input to debugfs results in buffer overflow crashes.  Adapt
input string lengths to fit within internal buffers, leaving space for NULL
terminators.

Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: clk-alpha-pll: fix clk_trion_pll_configure description

[ Upstream commit 94bed9bb05c7850ff5d80b87cc29004901f37956 ]

After merging lucid and trion pll functions in commit 0b01489475c6
("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid")
the function clk_trion_pll_configure() is left with an old description
header, which results in a W=2 compile time warning, fix it.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220701062711.2757855-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

zram: do not lookup algorithm in backends table

[ Upstream commit dc89997264de565999a1cb55db3f295d3a8e457b ]

Always use crypto_has_comp() so that crypto can lookup module, call
usermodhelper to load the modules, wait for usermodhelper to finish and so
on.  Otherwise crypto will do all of these steps under CPU hot-plug lock
and this looks like too much stuff to handle under the CPU hot-plug lock.
Besides this can end up in a deadlock when usermodhelper triggers a code
path that attempts to lock the CPU hot-plug lock, that zram already holds.

An example of such deadlock:

- path A. zram grabs CPU hot-plug lock, execs /sbin/modprobe from crypto
  and waits for modprobe to finish

disksize_store
 zcomp_create
  __cpuhp_state_add_instance
   __cpuhp_state_add_instance_cpuslocked
    zcomp_cpu_up_prepare
     crypto_alloc_base
      crypto_alg_mod_lookup
       call_usermodehelper_exec
        wait_for_completion_killable
         do_wait_for_common
          schedule

- path B. async work kthread that brings in scsi device. It wants to
  register CPUHP states at some point, and it needs the CPU hot-plug
  lock for that, which is owned by zram.

async_run_entry_fn
 scsi_probe_and_add_lun
  scsi_mq_alloc_queue
   blk_mq_init_queue
    blk_mq_init_allocated_queue
     blk_mq_realloc_hw_ctxs
      __cpuhp_state_add_instance
       __cpuhp_state_add_instance_cpuslocked
        mutex_lock
         schedule

- path C. modprobe sleeps, waiting for all aync works to finish.

load_module
 do_init_module
  async_synchronize_full
   async_synchronize_cookie_domain
    schedule

[senozhatsky@chromium.org: add comment]
Link: https://lkml.kernel.org/r/20220624060606.1014474-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20220622023501.517125-1-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uacce: Handle parent device removal or parent driver module rmmod

[ Upstream commit 80fc671bcc0173836e9032b0c698ea74c13b9d7c ]

The uacce driver must deal with a possible removal of the parent device
or parent driver module rmmod at any time.

Although uacce_remove(), called on device removal and on driver unbind,
prevents future use of the uacce fops by removing the cdev, fops that
were called before that point may still be running.

Serialize uacce_fops_open() and uacce_remove() with uacce->mutex.
Serialize other fops against uacce_remove() with q->mutex.
Since we need to protect uacce_fops_poll() which gets called on the fast
path, replace uacce->queues_lock with q->mutex to improve scalability.
The other fops are only used during setup.

uacce_queue_is_valid(), checked under q->mutex or uacce->mutex, denotes
whether uacce_remove() has disabled all queues. If that is the case,
don't go any further since the parent device is being removed and
uacce->ops should not be called anymore.

Reported-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20220701034843.7502-1-zhangfei.gao@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: ipq8074: dont disable gcc_sleep_clk_src

[ Upstream commit 1bf7305e79aab095196131bdc87a97796e0e3fac ]

Once the usb sleep clocks are disabled, clock framework is trying to
disable the sleep clock source also.

However, it seems that it cannot be disabled and trying to do so produces:
[  245.436390] ------------[ cut here ]------------
[  245.441233] gcc_sleep_clk_src status stuck at 'on'
[  245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140
[  245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio
[  245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215
[  245.463889] Hardware name: Xiaomi AX9000 (DT)
[  245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  245.474307] pc : clk_branch_wait+0x130/0x140
[  245.481073] lr : clk_branch_wait+0x130/0x140
[  245.485588] sp : ffffffc009f2bad0
[  245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000
[  245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20
[  245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0
[  245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7
[  245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777
[  245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129
[  245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001
[  245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001
[  245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027
[  245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026
[  245.557122] Call trace:
[  245.564229]  clk_branch_wait+0x130/0x140
[  245.566490]  clk_branch2_disable+0x2c/0x40
[  245.570656]  clk_core_disable+0x60/0xb0
[  245.574561]  clk_core_disable+0x68/0xb0
[  245.578293]  clk_disable+0x30/0x50
[  245.582113]  dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom]
[  245.585588]  platform_remove+0x28/0x60
[  245.590361]  device_remove+0x4c/0x80
[  245.594179]  device_release_driver_internal+0x1dc/0x230
[  245.597914]  device_driver_detach+0x18/0x30
[  245.602861]  unbind_store+0xec/0x110
[  245.607027]  drv_attr_store+0x24/0x40
[  245.610847]  sysfs_kf_write+0x44/0x60
[  245.614405]  kernfs_fop_write_iter+0x128/0x1c0
[  245.618052]  new_sync_write+0xc0/0x130
[  245.622391]  vfs_write+0x1d4/0x2a0
[  245.626123]  ksys_write+0x58/0xe0
[  245.629508]  __arm64_sys_write+0x1c/0x30
[  245.632895]  invoke_syscall.constprop.0+0x5c/0x110
[  245.636890]  do_el0_svc+0xa0/0x150
[  245.641488]  el0_svc+0x18/0x60
[  245.644872]  el0t_64_sync_handler+0xa4/0x130
[  245.647914]  el0t_64_sync+0x174/0x178
[  245.652340] ---[ end trace 0000000000000000 ]---

So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try
to disable the sleep clock.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-10-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

vboxguest: Do not use devm for irq

[ Upstream commit 6169525b76764acb81918aa387ac168fb9a55575 ]

When relying on devm it doesn't get freed early enough which causes the
following warning when unloading the module:

[249348.837181] remove_proc_entry: removing non-empty directory 'irq/20', leaking at least 'vboxguest'
[249348.837219] WARNING: CPU: 0 PID: 6708 at fs/proc/generic.c:715 remove_proc_entry+0x119/0x140

[249348.837379] Call Trace:
[249348.837385]  unregister_irq_proc+0xbd/0xe0
[249348.837392]  free_desc+0x23/0x60
[249348.837396]  irq_free_descs+0x4a/0x70
[249348.837401]  irq_domain_free_irqs+0x160/0x1a0
[249348.837452]  mp_unmap_irq+0x5c/0x60
[249348.837458]  acpi_unregister_gsi_ioapic+0x29/0x40
[249348.837463]  acpi_unregister_gsi+0x17/0x30
[249348.837467]  acpi_pci_irq_disable+0xbf/0xe0
[249348.837473]  pcibios_disable_device+0x20/0x30
[249348.837478]  pci_disable_device+0xef/0x120
[249348.837482]  vbg_pci_remove+0x6c/0x70 [vboxguest]

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pascal Terjan <pterjan@google.com>
Link: https://lore.kernel.org/r/20220612133744.4030602-1-pterjan@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: gadget: remove D+ pull-up while no vbus with usb-role-switch

[ Upstream commit db638c6500abaffb8f7770b2a69c40d003d54ae1 ]

When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is
cleared, whatever the vbus valid signal state is. The pull-up should not
be set when vbus isn't present (this is determined by the drd controller).

This patch ensures that B-Session (so Peripheral role + vbus valid signal)
is valid before clearing the DCTL_SFTDISCON bit when role switch is used.
Keep original behavior when usb-role-switch isn't used.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20220622160717.314580-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: renesas: Fix refcount leak bug

[ Upstream commit 9d6d5303c39b8bc182475b22f45504106a07f086 ]

In usbhs_rza1_hardware_init(), of_find_node_by_name() will return
a node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220618023205.4056548-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: ohci-ppc-of: Fix refcount leak bug

[ Upstream commit 40a959d7042bb7711e404ad2318b30e9f92c6b9b ]

In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return
a node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators

[ Upstream commit 3fd23b8dfb54d9b74eba6dfdd3225db3ac116785 ]

Currently the LPM configurations of device regulators may not work since
VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.

Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm().

Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ti: Stop using legacy clkctrl names for omap4 and 5

[ Upstream commit 255584b138343d4a28c6d25bd82d04b09460d672 ]

With the addition of clock-output-names, we can now unify the internal
clock naming for omap4 and 5 to follow the other TI SoCs.

We are still using legacy clkctrl names for omap4 and 5 based on the clock
manager name which is wrong. Instead, we want to use the clkctrl clock
based naming.

We must now also drop the legacy TI_CLK_CLKCTRL_COMPAT quirk for the
clkctrl clock.

This change will allow further devicetree warning cleanup as already
done for am3/4 and dra7.

Cc: linux-clk@vger.kernel.org
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220615064306.22254-1-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Fix overflow implicit truncation warnings

[ Upstream commit 98692f52c588225034cbff458622c2c06dfcb544 ]

Fix -Woverflow warnings for drm/meson driver which is a result
of moving arm64 custom MMIO accessor macros to asm-generic function
implementations giving a bonus type-checking now and uncovering these
overflow warnings.

drivers/gpu/drm/meson/meson_viu.c: In function ‘meson_viu_init’:
drivers/gpu/drm/meson/meson_registers.h:1826:48: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
 #define  VIU_OSD_BLEND_REORDER(dest, src)      ((src) << (dest * 4))
                                                ^
drivers/gpu/drm/meson/meson_viu.c:472:18: note: in expansion of macro ‘VIU_OSD_BLEND_REORDER’
   writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) |
                  ^~~~~~~~~~~~~~~~~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/tegra: Fix overflow implicit truncation warnings

[ Upstream commit 443685992bda9bb4f8b17fc02c9f6c60e62b1461 ]

Fix -Woverflow warnings for tegra irqchip driver which is a result
of moving arm64 custom MMIO accessor macros to asm-generic function
implementations giving a bonus type-checking now and uncovering these
overflow warnings.

drivers/irqchip/irq-tegra.c: In function ‘tegra_ictlr_suspend’:
drivers/irqchip/irq-tegra.c:151:18: warning: large integer implicitly truncated to unsigned type [-Woverflow]
   writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);
                  ^

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: aardvark: Fix reporting Slot capabilities on emulated bridge

[ Upstream commit bcdb6fd4f3e9ac1097698c8d8f56b70853b49873 ]

Slot capabilities are currently not reported because emulated bridge does
not report the PCI_EXP_FLAGS_SLOT flag.

Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers
are supported.

Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read
function to static buffer as it is only statically filled the
PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this
register.

Set Presence State Bit to 1 since there is no support for unplugging the
card and there is currently no platform able to detect presence of a card -
in such a case the bit needs to be set to 1.

Finally correctly set Physical Slot Number to 1 since there is only one
port and zero value is reserved for ports within the same silicon as Root
Port which is not our case for Aardvark HW.

Link: https://lore.kernel.org/r/20220524132827.8837-3-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: call uvc uvcg_warn on completed status instead of uvcg_info

[ Upstream commit a725d0f6dfc5d3739d6499f30ec865305ba3544d ]

Likewise to the uvcvideo hostside driver, this patch is changing the
usb_request message of an non zero completion handler call from dev_info
to dev_warn.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220529223848.105914-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: uvc: calculate the number of request depending on framesize

[ Upstream commit 87d76b5f1d8eeb49efa16e2018e188864cbb9401 ]

The current limitation of possible number of requests being handled is
dependent on the gadget speed. It makes more sense to depend on the
typical frame size when calculating the number of requests. This patch
is changing this and is using the previous limits as boundaries for
reasonable minimum and maximum number of requests.

For a 1080p jpeg encoded video stream with a maximum imagesize of
e.g. 800kB with a maxburst of 8 and an multiplier of 1 the resulting
number of requests is calculated to 49.

        800768         1
nreqs = ------ * -------------- ~= 49
          2      (1024 * 8 * 1)

Tested-by: Dan Vacura <w36195@motorola.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220529223848.105914-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: cdns3: fix random warning message when driver load

[ Upstream commit 8659ab3d936fcf0084676f98b75b317017aa8f82 ]

Warning log:
[    4.141392] Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xa20 (GFP_ATOMIC). Fix your code!
[    4.150340] CPU: 1 PID: 175 Comm: 1-0050 Not tainted 5.15.5-00039-g2fd9ae1b568c #20
[    4.158010] Hardware name: Freescale i.MX8QXP MEK (DT)
[    4.163155] Call trace:
[    4.165600]  dump_backtrace+0x0/0x1b0
[    4.169286]  show_stack+0x18/0x68
[    4.172611]  dump_stack_lvl+0x68/0x84
[    4.176286]  dump_stack+0x18/0x34
[    4.179613]  kmalloc_fix_flags+0x60/0x88
[    4.183550]  new_slab+0x334/0x370
[    4.186878]  ___slab_alloc.part.108+0x4d4/0x748
[    4.191419]  __slab_alloc.isra.109+0x30/0x78
[    4.195702]  kmem_cache_alloc+0x40c/0x420
[    4.199725]  dma_pool_alloc+0xac/0x1f8
[    4.203486]  cdns3_allocate_trb_pool+0xb4/0xd0

pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags)
{
...
page = kmalloc(sizeof(*page), mem_flags);
page->vaddr = dma_alloc_coherent(pool->dev, pool->allocation,
 &page->dma, mem_flags);
...
}

kmalloc was called with mem_flags, which is passed down in
cdns3_allocate_trb_pool() and have GFP_DMA32 flags.
kmall_fix_flags() report warning.

GFP_DMA32 is not useful at all. dma_alloc_coherent() will handle
DMA memory region correctly by pool->dev. GFP_DMA32 can be removed
safely.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20220609154456.2871672-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: cdns3 fix use-after-free at workaround 2

[ Upstream commit 7d602f30149a117eea260208b1661bc404c21dfd ]

BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xac

cdns3_wa2_remove_old_request()
{
...
kfree(priv_req->request.buf);
cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request);
list_del_init(&priv_req->list);
^^^ use after free
...
}

cdns3_gadget_ep_free_request() free the space pointed by priv_req,
but priv_req is used in the following list_del_init().

This patch move list_del_init() before cdns3_gadget_ep_free_request().

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Faqiang Zhu <faqiang.zhu@nxp.com>
Link: https://lore.kernel.org/r/20220608190430.2814358-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_proto: don't show MKBP version if unsupported

[ Upstream commit b36f0643ff14a2fb281b105418e4e73c9d7c11d0 ]

It wrongly showed the following message when it doesn't support MKBP:
"MKBP support version 4294967295".

Fix it.

Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-14-tzungbi@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add ACS quirk for Broadcom BCM5750x NICs

[ Upstream commit afd306a65cedb9589564bdb23a0c368abc4215fd ]

The Broadcom BCM5750x NICs may be multi-function devices.  They do not
advertise ACS capability. Peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.

Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.

Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: new device class fix Lenovo X12 trackpad sticky

[ Upstream commit 54eed5c7b938dc4ef6b14d4ee048bbdafdbce352 ]

The trackpad of the given device sends continuous report of pointers
status as per wxn8 spec. However, the spec did not clarify when the
fingers are lifted so fast that between the interval of two report
frames fingers on pad reduced from >=2 to 0. The second last report
contains >=2 fingers with tip state 1 and the last report contains only
1 finger with tip state 0. Although this can happen unfrequently, a
  quick fix will be improve the consistency to 100%. A quick fix is to
disable MT_QUIRK_ALWAYS_VALID and enable MT_QUIRK_NOT_SEEN_MEANS_UP.

Test for hid-tools is added in [1]

In addition to this, I2C device 04CA:00B1 may also need similar class
but with MT_QUIRK_FORCE_MULTI_INPUT disabled (but it does not harm to
 enable it on non-multi-input device either). The respective owner has
been notified and a patch may coming soon after test.

[1]: https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/130

Signed-off-by: Tao Jin <tao-j@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Reject 32bit user PSTATE on asymmetric systems

[ Upstream commit b10d86fb8e46cc812171728bcd326df2f34e9ed5 ]

KVM does not support AArch32 EL0 on asymmetric systems. To that end,
prevent userspace from configuring a vCPU in such a state through
setting PSTATE.

It is already ABI that KVM rejects such a write on a system where
AArch32 EL0 is unsupported. Though the kernel's definition of a 32bit
system changed in commit 2122a833316f ("arm64: Allow mismatched
32-bit EL0 support"), KVM's did not.

Fixes: 2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-3-oliver.upton@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Treat PMCR_EL1.LC as RES1 on asymmetric systems

[ Upstream commit f3c6efc72f3b20ec23566e768979802f0a398f04 ]

KVM does not support AArch32 on asymmetric systems. To that end, enforce
AArch64-only behavior on PMCR_EL1.LC when on an asymmetric system.

Fixes: 2122a833316f ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-2-oliver.upton@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: start MHI channel after endpoit creation

[ Upstream commit 68a838b84effb7b57ba7d50b1863fc6ae35a54ce ]

MHI channel may generates event/interrupt right after enabling.
It may leads to 2 race conditions issues.

1)
Such event may be dropped by qcom_mhi_qrtr_dl_callback() at check:

if (!qdev || mhi_res->transaction_status)
return;

Because dev_set_drvdata(&mhi_dev->dev, qdev) may be not performed at
this moment. In this situation qrtr-ns will be unable to enumerate
services in device.
---------------------------------------------------------------

2)
Such event may come at the moment after dev_set_drvdata() and
before qrtr_endpoint_register(). In this case kernel will panic with
accessing wrong pointer at qcom_mhi_qrtr_dl_callback():

rc = qrtr_endpoint_post(&qdev->ep, mhi_res->buf_addr,
mhi_res->bytes_xferd);

Because endpoint is not created yet.
--------------------------------------------------------------
So move mhi_prepare_for_transfer_autoqueue after endpoint creation
to fix it.

Fixes: a2e2cc0dbb11 ("net: qrtr: Start MHI channels during init")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Hemant Kumar <quic_hemantk@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: dsi: Prevent underflow when computing packet sizes

[ Upstream commit 82a1356a933d8443139f8886f11b63c974a09a67 ]

Currently, the packet overhead is subtracted using unsigned arithmetic.
With a short sync pulse, this could underflow and wrap around to near
the maximal u16 value. Fix this by using signed subtraction. The call to
max() will correctly handle any negative numbers that are produced.

Apply the same fix to the other timings, even though those subtractions
are less likely to underflow.

Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220812031623.34057-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Fix refcount bugs in meson_vpu_has_available_connectors()

[ Upstream commit 91b3c8dbe898df158fd2a84675f3a284ff6666f7 ]

In this function, there are two refcount leak bugs:
(1) when breaking out of for_each_endpoint_of_node(), we need call
the of_node_put() for the 'ep';
(2) we should call of_node_put() for the reference returned by
of_graph_get_remote_port() when it is not used anymore.

Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Liang He <windhl@126.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726010722.1319416-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf()

[ Upstream commit 94c1ceb043c1a002de9649bb630c8e8347645982 ]

snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).

This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.

Fixes: 29c8e4398f02 ("ASoC: SOF: Intel: hda: add extended rom status dump to error log")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801165420.25978-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda: Define rom_status_reg in sof_intel_dsp_desc

[ Upstream commit 71778f7940f0b496aa1ca1134f3b70b425a59bab ]

Add the rom_status_reg field to struct sof_intel_dsp_desc and define
it for HDA platforms. This will be used to check the ROM status during
FW boot.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/imx/dcss: get rid of HPD warning message

[ Upstream commit 30bdc36b8c776cd4fce5de2a96ff28b37f96942f ]

When DCSS + MIPI_DSI is used, and the last bridge in the chain supports
HPD, we can see a "Hot plug detection already enabled" warning stack
trace dump that's thrown when DCSS is initialized.

The problem appeared when HPD was enabled by default in the
bridge_connector initialization, which made the
drm_bridge_connector_enable_hpd() call, in DCSS init path, redundant.
So, let's remove that call.

Fixes: 09077bc311658 ("drm/bridge_connector: enable HPD by default if supported")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721120912.6639-1-laurentiu.palcu@oss.nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/eprobes: Fix reading of string fields

commit f04dec93466a0481763f3b56cdadf8076e28bfbf upstream.

Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.

Now when a string field is used, the ":string" type can be used to display
it:

  echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events

Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file

commit 012e8d2034f1bda8863435cd589636e618d6a659 upstream.

Commit 36d4b36b6959 ("lib/nodemask: inline next_node_in() and
node_random()") refactored some code by moving node_random() from
lib/nodemask.c to include/linux/nodemask.h, thus requiring nodemask.h to
include random.h, which conditionally defines add_latent_entropy()
depending on whether the macro LATENT_ENTROPY_PLUGIN is defined.

This broke the build on powerpc, where nodemask.h is indirectly included
in arch/powerpc/kernel/prom_init.c, part of the early boot machinery that
is excluded from the latent entropy plugin using
DISABLE_LATENT_ENTROPY_PLUGIN. It turns out that while we add a gcc flag
to disable the actual plugin, we don't undefine LATENT_ENTROPY_PLUGIN.

This leads to the following:

    CC      arch/powerpc/kernel/prom_init.o
  In file included from ./include/linux/nodemask.h:97,
                   from ./include/linux/mmzone.h:17,
                   from ./include/linux/gfp.h:7,
                   from ./include/linux/xarray.h:15,
                   from ./include/linux/radix-tree.h:21,
                   from ./include/linux/idr.h:15,
                   from ./include/linux/kernfs.h:12,
                   from ./include/linux/sysfs.h:16,
                   from ./include/linux/kobject.h:20,
                   from ./include/linux/pci.h:35,
                   from arch/powerpc/kernel/prom_init.c:24:
  ./include/linux/random.h: In function 'add_latent_entropy':
  ./include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
     25 |         add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
        |                                              ^~~~~~~~~~~~~~
        |                                              add_latent_entropy
  ./include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
  make[2]: *** [scripts/Makefile.build:249: arch/powerpc/kernel/prom_init.o] Fehler 1
  make[1]: *** [scripts/Makefile.build:465: arch/powerpc/kernel] Fehler 2
  make: *** [Makefile:1855: arch/powerpc] Error 2

Change the DISABLE_LATENT_ENTROPY_PLUGIN flags to undefine
LATENT_ENTROPY_PLUGIN for files where the plugin is disabled.

Cc: Yury Norov <yury.norov@gmail.com>
Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216367
Link: https://lore.kernel.org/linuxppc-dev/alpine.DEB.2.22.394.2208152006320.289321@ramsan.of.borg/
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220816051720.44108-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: fix the modules order between drivers and libs

commit 113147510b48e764e624e3d0e6707a1e48bc05a9 upstream.

Commit b2c885549122 ("kbuild: update modules.order only when contained
modules are updated") accidentally changed the modules order.

Prior to that commit, the modules order was determined based on
vmlinux-dirs, which lists core-y/m, drivers-y/m, libs-y/m, in this order.

Now, subdir-modorder lists them in a different order: core-y/m, libs-y/m,
drivers-y/m.

Presumably, there was no practical issue because the modules in drivers
and libs are orthogonal, but there is no reason to have this distortion.

Get back to the original order.

Fixes: b2c885549122 ("kbuild: update modules.order only when contained modules are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: Add lock to avoid data race

commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream.

The commit c23d92b80e0b ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.

However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.

 (FREE from device detaching)      |   (USE from netdev core)
igb_remove                         |  igb_ndo_get_vf_config
 igb_disable_sriov                 |  vf >= adapter->vfs_allocated_count?
  kfree(adapter->vf_data)          |
  adapter->vfs_allocated_count = 0 |
                                   |    memcpy(... adapter->vf_data[vf]

Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.

 (FREE from device detaching)      |   (USE from requests)
igb_remove                         |  igb_msix_other
 igb_disable_sriov                 |   igb_msg_task
  kfree(adapter->vf_data)          |    vf < adapter->vfs_allocated_count
  adapter->vfs_allocated_count = 0 |

To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")

Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()

commit 5c23d6b717e4e956376f3852b90f58e262946b50 upstream.

Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()

This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
   While unloading the dwmac-intel driver, clk_disable_unprepare() is
   being called twice in stmmac_dvr_remove() and
   intel_eth_pci_remove(). This causes kernel panic on the second call.
"

However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.

So this call should now be called from intel_eth_pci_remove().

Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fec: Fix timer capture timing in `fec_ptp_enable_pps()`

commit 61d5e2a251fb20c2c5e998c3f1d52ed6d5360319 upstream.

Code reimplements functionality already in `fec_ptp_read()`,
but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call.

Fixes: 28b5f058cf1d ("net: fec: ptp: fix convergence issue to support LinuxPTP stack")
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix to stop tx_timeout recovery if GLOBR fails

commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream.

When a tx_timeout fires, the PF attempts to recover by incrementally
resetting.  First we try a PFR, then CORER and finally a GLOBR.  If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.

If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: pca9450: Remove restrictions for regulator-name

commit b0de7fa706506bf0591037908376351beda8c5d6 upstream.

The device bindings shouldn't put any constraints on the regulator-name
property specified in the generic bindings. This allows using arbitrary
and descriptive names for the regulators.

Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 7ae9e3a6bf3f ("dt-bindings: regulator: add pca9450 regulator yaml")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20220802064335.8481-1-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: imx: Make sure to unregister adapter on remove()

commit d98bdd3a5b50446d8e010be5b04ce81c4eabf728 upstream.

If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.

So unregister the software resources even if resume failed, and only skip
the hardware access in that case.

Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ice: Ignore EEXIST when setting promisc mode

commit 11e551a2efa4481bd4f616ab75374a2710b480e9 upstream.

Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.

Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions()

commit fd8e899cdb5ecaf8e8ee73854a99e10807eef1de upstream.

If an error occurs in dsa_devlink_region_create(), then 'priv->regions'
array will be accessed by negative index '-1'.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region")
Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it

commit 211987f3ac734000ea1548784b2a4539a974fbc8 upstream.

ds->ops->port_stp_state_set() is, like most DSA methods, optional, and
if absent, the port is supposed to remain in the forwarding state (as
standalone). Such is the case with the mv88e6060 driver, which does not
offload the bridge layer. DSA warns that the STP state can't be changed
to FORWARDING as part of dsa_port_enable_rt(), when in fact it should not.

The error message is also not up to modern standards, so take the
opportunity to make it more descriptive.

Fixes: fd3645413197 ("net: dsa: change scope of STP state setter")
Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220816201445.1809483-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: genl: fix error path memory leak in policy dumping

commit 249801360db3dec4f73768c502192020bfddeacc upstream.

If construction of the array of policies fails when recording
non-first policy we need to unwind.

netlink_policy_dump_add_policy() itself also needs fixing as
it currently gives up on error without recording the allocated
pointer in the pstate pointer.

Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com
Fixes: 50a896cf2d6f ("genetlink: properly support per-op policy dumping")
Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters

commit 40d21c4565bce064c73a03b79a157a3493c518b9 upstream.

What the driver actually reports as 256-511 is in fact 512-1023, and the
TX packets in the 256-511 bucket are not reported. Fix that.

Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: microchip: ksz9477: fix fdb_dump last invalid entry

commit 36c0d935015766bf20d621c18313f17691bda5e3 upstream.

In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.

Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix potential refcount leak in ndisc_router_discovery()

commit 7396ba87f1edf549284869451665c7c4e74ecd4f upstream.

The issue happens on specific paths in the function. After both the
object `rt` and `neigh` are grabbed successfully, when `lifetime` is
nonzero but the metric needs change, the function just deletes the
route and set `rt` to NULL. Then, it may try grabbing `rt` and `neigh`
again if above conditions hold. The function simply overwrite `neigh`
if succeeds or returns if fails, without decreasing the reference
count of previous `neigh`. This may result in memory leaks.

Fix it by decrementing the reference count of `neigh` in place.

Fixes: 6b2e04bc240f ("net: allow user to set metric on default route learned via Router Advertisement")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: moxa: pass pdev instead of ndev to DMA functions

commit 3a12df22a8f68954a4ba48435c06b3d1791c87c4 upstream.

dma_map_single() calls fail in moxart_mac_setup_desc_ring() and
moxart_mac_start_xmit() which leads to an incessant output of this:

[   16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error
[   16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error
[   16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error

Passing pdev to DMA is a common approach among net drivers.

Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum: Clear PTP configuration after unregistering the netdevice

commit a159e986ad26d3f35c0157ac92760ba5e44e6785 upstream.

Currently as part of removing port, PTP API is called to clear the
existing configuration and set the 'rx_filter' and 'tx_type' to zero.
The clearing is done before unregistering the netdevice, which means that
there is a window of time in which the user can reconfigure PTP in the
port, and this configuration will not be cleared.

Reorder the operations, clear PTP configuration after unregistering the
netdevice.

Fixes: 8748642751ede ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88e6060: prevent crash on an unused port

commit 246bbf2f977ea36aaf41f5d24370fef433250728 upstream.

If the port isn't a CPU port nor a user port, 'cpu_dp'
is a null pointer and a crash happened on dereferencing
it in mv88e6060_setup_port():

[    9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014
...
[    9.942216]  mv88e6060_setup from dsa_register_switch+0x814/0xe84
[    9.948616]  dsa_register_switch from mdio_probe+0x2c/0x54
[    9.954433]  mdio_probe from really_probe.part.0+0x98/0x2a0
[    9.960375]  really_probe.part.0 from driver_probe_device+0x30/0x10c
[    9.967029]  driver_probe_device from __device_attach_driver+0xb8/0x13c
[    9.973946]  __device_attach_driver from bus_for_each_drv+0x90/0xe0
[    9.980509]  bus_for_each_drv from __device_attach+0x110/0x184
[    9.986632]  __device_attach from bus_probe_device+0x8c/0x94
[    9.992577]  bus_probe_device from deferred_probe_work_func+0x78/0xa8
[    9.999311]  deferred_probe_work_func from process_one_work+0x290/0x73c
[   10.006292]  process_one_work from worker_thread+0x30/0x4b8
[   10.012155]  worker_thread from kthread+0xd4/0x10c
[   10.017238]  kthread from ret_from_fork+0x14/0x3c

Fixes: 0abfd494deef ("net: dsa: use dedicated CPU port")
CC: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220811070939.1717146-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/sunrpc: fix potential memory leaks in rpc_sysfs_xprt_state_change()

commit bfc48f1b0505ffcb03a6d749139b7577d6b81ae0 upstream.

The issue happens on some error handling paths. When the function
fails to grab the object `xprt`, it simply returns 0, forgetting to
decrease the reference count of another object `xps`, which is
increased by rpc_sysfs_xprt_kobj_get_xprt_switch(), causing refcount
leaks. Also, the function forgets to check whether `xps` is valid
before using it, which may result in NULL-dereferencing issues.

Fix it by adding proper error handling code when either `xprt` or
`xps` is NULL.

Fixes: 5b7eb78486cd ("SUNRPC: take a xprt offline using sysfs")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: meson-spicc: add local pow2 clock ops to preserve rate between messages

commit 09992025dacd258c823f50e82db09d7ef06cdac4 upstream.

At the end of a message, the HW gets a reset in meson_spicc_unprepare_transfer(),
this resets the SPICC_CONREG register and notably the value set by the
Common Clock Framework.

This is problematic because:
- the register value CCF can be different from the corresponding CCF cached rate
- CCF is allowed to change the clock rate whenever the HW state

This introduces:
- local pow2 clock ops checking the HW state before allowing a clock operation
- separation of legacy pow2 clock patch and new enhanced clock path
- SPICC_CONREG datarate value is now value kepts across messages

It has been checked that:
- SPICC_CONREG datarate value is kept across messages
- CCF is only allowed to change the SPICC_CONREG datarate value when busy
- SPICC_CONREG datarate value is correct for each transfer

This didn't appear before commit 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support")
because we recalculated and wrote the rate for each xfer.

Fixes: 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support")
Reported-by: Da Xue <da@libre.computer>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220811134445.678446-1-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pci: Fix get_phb_number() locking

commit 8d48562a2729742f767b0fdd994d6b2a56a49c63 upstream.

The recent change to get_phb_number() causes a DEBUG_ATOMIC_SLEEP
warning on some systems:

  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper
  preempt_count: 1, expected: 0
  RCU nest depth: 0, expected: 0
  1 lock held by swapper/1:
   #0: c157efb0 (hose_spinlock){+.+.}-{2:2}, at: pcibios_alloc_controller+0x64/0x220
  Preemption disabled at:
  [<00000000>] 0x0
  CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0-yocto-standard+ #1
  Call Trace:
  [d101dc90] [c073b264] dump_stack_lvl+0x50/0x8c (unreliable)
  [d101dcb0] [c0093b70] __might_resched+0x258/0x2a8
  [d101dcd0] [c0d3e634] __mutex_lock+0x6c/0x6ec
  [d101dd50] [c0a84174] of_alias_get_id+0x50/0xf4
  [d101dd80] [c002ec78] pcibios_alloc_controller+0x1b8/0x220
  [d101ddd0] [c140c9dc] pmac_pci_init+0x198/0x784
  [d101de50] [c140852c] discover_phbs+0x30/0x4c
  [d101de60] [c0007fd4] do_one_initcall+0x94/0x344
  [d101ded0] [c1403b40] kernel_init_freeable+0x1a8/0x22c
  [d101df10] [c00086e0] kernel_init+0x34/0x160
  [d101df30] [c001b334] ret_from_kernel_thread+0x5c/0x64

This is because pcibios_alloc_controller() holds hose_spinlock but
of_alias_get_id() takes of_mutex which can sleep.

The hose_spinlock protects the phb_bitmap, and also the hose_list, but
it doesn't need to be held while get_phb_number() calls the OF routines,
because those are only looking up information in the device tree.

So fix it by having get_phb_number() take the hose_spinlock itself, only
where required, and then dropping the lock before returning.
pcibios_alloc_controller() then needs to take the lock again before the
list_add() but that's safe, the order of the list is not important.

Fixes: 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220815065550.1303620-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified

commit 1b6345d4160ecd3d04bd8cd75df90c67811e8cc9 upstream.

Since f3a2181e16f1 ("netfilter: nf_tables: Support for sets with
multiple ranged fields"), it possible to combine intervals and
concatenations. Later on, ef516e8625dd ("netfilter: nf_tables:
reintroduce the NFT_SET_CONCAT flag") provides the NFT_SET_CONCAT flag
for userspace to report that the set stores a concatenation.

Make sure NFT_SET_CONCAT is set on if field_count is specified for
consistency. Otherwise, if NFT_SET_CONCAT is specified with no
field_count, bail out with EINVAL.

Fixes: ef516e8625dd ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END

commit fc0ae524b5fd2938c94d56da3f749f11eb3273d5 upstream.

These flags are mutually exclusive, report EINVAL in this case.

Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags

commit 88cccd908d51397f9754f89a937cd13fa59dee37 upstream.

If the NFT_SET_CONCAT|NFT_SET_INTERVAL flags are set on, then the
netlink attribute NFTA_SET_ELEM_KEY_END must be specified. Otherwise,
NFTA_SET_ELEM_KEY_END should not be present.

For catch-all element, NFTA_SET_ELEM_KEY_END should not be present.
The NFT_SET_ELEM_INTERVAL_END is never used with this set flags
combination.

Fixes: 7b225d0b5c6d ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag

commit 5a2f3dc31811e93be15522d9eb13ed61460b76c8 upstream.

If the NFTA_SET_ELEM_OBJREF netlink attribute is present and
NFT_SET_OBJECT flag is set on, report EINVAL.

Move existing sanity check earlier to validate that NFT_SET_OBJECT
requires NFTA_SET_ELEM_OBJREF.

Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: really skip inactive sets when allocating name

commit 271c5ca826e0c3c53e0eb4032f8eaedea1ee391c upstream.

While looping to build the bitmap of used anonymous set names, check the
current set in the iteration, instead of the one that is being created.

Fixes: 37a9cc525525 ("netfilter: nf_tables: add generation mask to sets")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: possible module reference underflow in error path

commit c485c35ff6783ccd12c160fcac6a0e504e83e0bf upstream.

dst->ops is set on when nft_expr_clone() fails, but module refcount has
not been bumped yet, therefore nft_expr_destroy() leads to module
reference underflow.

Fixes: 8cfd9b0f8515 ("netfilter: nftables: generalize set expressions support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag

commit 4963674c2e71fc062f8f089f0f58ffbb5533060b upstream.

These are mutually exclusive, actually NFTA_SET_ELEM_KEY_END replaces
the flag notation.

Fixes: 7b225d0b5c6d ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: uninitialized variable in ntfs_set_acl_ex()

commit d4073595d0c61463ec3a87411b19e2a90f76d3f8 upstream.

The goto out calls kfree(value) on an uninitialized pointer.  Just
return directly as the other error paths do.

Fixes: 460bbf2990b3 ("fs/ntfs3: Do not change mode if ntfs_set_ea failed")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access

commit 3400278328285a8c2f121904496aff5e7b610a01 upstream.

The generation ID is bumped from the commit path while holding the
mutex, however, netlink dump operations rely on RCU.

This patch also adds missing cb->base_eq initialization in
nf_tables_dump_set().

Fixes: 38e029f14a97 ("netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: codec: tlv320aic32x4: fix mono playback via I2S

commit b4b5f29a076e52181f63e45a2ad1bc88593072e3 upstream.

The two commits referenced below break mono playback via I2S DAI because
they set BCLK to half the required speed. For PCM transport over I2S, the
number of transmitted channels is always 2, even for mono playback.

Fixes: dcd79364bff3 ("ASoC: codec: tlv3204: Enable 24 bit audio support")
Fixes: 40b37136287b ("ASoC: tlv320aic32x4: Fix bdiv clock rate derivation")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220810104156.665452-1-p.zabel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Fix handling of mute/unmute

commit 1e5907bcb3a3b569be0a03ebe668bba2ed320a50 upstream.

Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one can mute an ongoing stream
by toggling a speaker pin control.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Drop conflicting set_bias_level power setting

commit 482c23fbc7e9bf5a7a74defd0735d5346215db58 upstream.

The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Allow mono streams

commit bf54d97a835dfe62d4d29e245e170c63d0089be7 upstream.

The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: tas2770: Set correct FSYNC polarity

commit e9ac31f0a5d0e246b046c20348954519f91a297f upstream.

Fix setting of FSYNC polarity for DAI formats other than I2S. Also
add support for polarity inversion.

Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: SOF: debug: Fix potential buffer overflow by snprintf()

commit 1eb123ce985e6cf302ac6e3f19862d132d86fa8f upstream.

snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).

This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.

Fixes: 5b10b6298921 ("ASoC: SOF: Add `memory_info` file to debugfs")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220801165420.25978-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: Fix reset error handling

commit 31071173771e079f7bc08dacd61e0db913262fbf upstream.

Do not call iavf_close in iavf_reset_task error handling. Doing so can
lead to double call of napi_disable, which can lead to deadlock there.
Removing VF would lead to iavf_remove task being stuck, because it
requires crit_lock, which is held by iavf_close.
Call iavf_disable_vf if reset fail, so that driver will clean up
remaining invalid resources.
During rapid VF resets, HW can fail to setup VF mailbox. Wrong
error handling can lead to iavf_remove being stuck with:
[ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53
...
[ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds.
[ 5267.189520]       Tainted: G S          E     5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5267.190062] task:repro.sh        state:D stack:    0 pid:11219 ppid:  8162 flags:0x00000000
[ 5267.190347] Call Trace:
[ 5267.190647]  <TASK>
[ 5267.190927]  __schedule+0x460/0x9f0
[ 5267.191264]  schedule+0x44/0xb0
[ 5267.191563]  schedule_preempt_disabled+0x14/0x20
[ 5267.191890]  __mutex_lock.isra.12+0x6e3/0xac0
[ 5267.192237]  ? iavf_remove+0xf9/0x6c0 [iavf]
[ 5267.192565]  iavf_remove+0x12a/0x6c0 [iavf]
[ 5267.192911]  ? _raw_spin_unlock_irqrestore+0x1e/0x40
[ 5267.193285]  pci_device_remove+0x36/0xb0
[ 5267.193619]  device_release_driver_internal+0xc1/0x150
[ 5267.193974]  pci_stop_bus_device+0x69/0x90
[ 5267.194361]  pci_stop_and_remove_bus_device+0xe/0x20
[ 5267.194735]  pci_iov_remove_virtfn+0xba/0x120
[ 5267.195130]  sriov_disable+0x2f/0xe0
[ 5267.195506]  ice_free_vfs+0x7d/0x2f0 [ice]
[ 5267.196056]  ? pci_get_device+0x4f/0x70
[ 5267.196496]  ice_sriov_configure+0x78/0x1a0 [ice]
[ 5267.196995]  sriov_numvfs_store+0xfe/0x140
[ 5267.197466]  kernfs_fop_write_iter+0x12e/0x1c0
[ 5267.197918]  new_sync_write+0x10c/0x190
[ 5267.198404]  vfs_write+0x24e/0x2d0
[ 5267.198886]  ksys_write+0x5c/0xd0
[ 5267.199367]  do_syscall_64+0x3a/0x80
[ 5267.199827]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 5267.200317] RIP: 0033:0x7f5b381205c8
[ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8
[ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001
[ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820
[ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0
[ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002
[ 5267.206041]  </TASK>
[ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks
[ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S          E     5.18.0-04958-ga54ce3703613-dirty #1
[ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019
[ 5267.209623] Call Trace:
[ 5267.210569]  <TASK>
[ 5267.211480]  dump_stack_lvl+0x33/0x42
[ 5267.212472]  panic+0x107/0x294
[ 5267.213467]  watchdog.cold.8+0xc/0xbb
[ 5267.214413]  ? proc_dohung_task_timeout_secs+0x30/0x30
[ 5267.215511]  kthread+0xf4/0x120
[ 5267.216459]  ? kthread_complete_and_exit+0x20/0x20
[ 5267.217505]  ret_from_fork+0x22/0x30
[ 5267.218459]  </TASK>

Fixes: f0db78928783 ("i40evf: use netdev variable in reset task")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iavf: Fix adminq error handling

commit 419831617ed349992c84344dbd9e627f9e68f842 upstream.

iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent
memory for VF mailbox.
Free DMA regions for both ASQ and ARQ in case error happens during
configuration of ASQ/ARQ registers.
Without this change it is possible to see when unloading interface:
74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32]
One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]

Fixes: d358aa9a7a2d ("i40evf: init code and hardware support")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: add force_successful_syscall_return()

commit fd0c153daad135d0ec1a53c5dbe6936a724d6ae1 upstream.

If we use the ancient SysV syscall ABI, we'd better have tell the
kernel how to claim that a negative return value is a success.
Use ->orig_r2 for that - it's inaccessible via ptrace, so it's
a fair game for changes and it's normally[*] non-negative on return
from syscall.  Set to -1; syscall is not going to be restart-worthy
by definition, so we won't interfere with that use either.

[*] the only exception is rt_sigreturn(), where we skip the entire
messing with r1/r2 anyway.

Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: restarts apply only to the first sigframe we build...

commit 411a76b7219555c55867466c82d70ce928d6c9e1 upstream.

Fixes: b53e906d255d ("nios2: Signal handling support")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: fix syscall restart checks

commit 2d631bd58fe0ea3e3350212e23c9aba1fb606514 upstream.

sys_foo() returns -512 (aka -ERESTARTSYS) => do_signal() sees
512 in r2 and 1 in r1.

sys_foo() returns 512 => do_signal() sees 512 in r2 and 0 in r1.

The former is restart-worthy; the latter obviously isn't.

Fixes: b53e906d255d ("nios2: Signal handling support")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: traced syscall does need to check the syscall number

commit 25ba820ef36bdbaf9884adeac69b6e1821a7df76 upstream.

all checks done before letting the tracer modify the register
state are worthless...

Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: don't leave NULLs in sys_call_table[]

commit 45ec746c65097c25e77d24eae8fee0def5b6cc5d upstream.

fill the gaps in there with sys_ni_syscall, as everyone does...

Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nios2: page fault et.al. are *not* restartable syscalls...

commit 8535c239ac674f7ead0f2652932d35c52c4123b2 upstream.

make sure that ->orig_r2 is negative for everything except
the syscalls.

Fixes: 82ed08dd1b0e ("nios2: Exception handling")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix missing i_op in ntfs_read_mft

commit 37a530bfe56ca9a0d3129598803f2794c7428aae upstream.

There is null pointer dereference because i_op == NULL.
The bug happens because we don't initialize i_op for records in $Extend.
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")

Reported-by: Liangbin Lian <jjm2473@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Do not change mode if ntfs_set_ea failed

commit 460bbf2990b3fdc597601c2cf669a3371c069242 upstream.

ntfs_set_ea can fail with NOSPC, so we don't need to
change mode in this situation.
Fixes xfstest generic/449
Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix double free on remount

commit cd39981fb92adf0cc736112f87e3e61602baa415 upstream.

Pointer to options was freed twice on remount
Fixes xfstest generic/361
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Don't clear upper bits accidentally in log_replay()

commit 926034353d3c67db1ffeab47dcb7f6bdac02a263 upstream.

The "vcn" variable is a 64 bit.  The "log->clst_per_page" variable is a
u32.  This means that the mask accidentally clears out the high 32 bits
when it was only supposed to clear some low bits.  Fix this by adding a
cast to u64.

Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix NULL deref in ntfs_update_mftmirr

commit 321460ca3b55f48b3ba6008248264ab2bd6407d9 upstream.

If ntfs_fill_super() wasn't called then sbi->sb will be equal to NULL.
Code should check this ptr before dereferencing. Syzbot hit this issue
via passing wrong mount param as can be seen from log below

Fail log:
ntfs3: Unknown parameter 'iochvrset'
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 1 PID: 3589 Comm: syz-executor210 Not tainted 5.18.0-rc3-syzkaller-00016-gb253435746d9 #0
...
Call Trace:
 <TASK>
 put_ntfs+0x1ed/0x2a0 fs/ntfs3/super.c:463
 ntfs_fs_free+0x6a/0xe0 fs/ntfs3/super.c:1363
 put_fs_context+0x119/0x7a0 fs/fs_context.c:469
 do_new_mount+0x2b4/0xad0 fs/namespace.c:3044
 do_mount fs/namespace.c:3383 [inline]
 __do_sys_mount fs/namespace.c:3591 [inline]

Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")
Reported-and-tested-by: syzbot+c95173762127ad76a824@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Fix using uninitialized value n when calling indx_read

commit ae5a4e46916fc307288227b64c1d062352eb93b7 upstream.

This value is checked in indx_read, so it must be initialized
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block")

Signed-off-by: Yan Lei <chinayanlei2002@163.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>