review.tizen.org Git - platform/kernel/linux-rpi.git/log

firmware/sysfb: Fix EFI/VESA format selection

Select color format for EFI/VESA firmware scanout buffer from the
number of bits per pixel and the position of the individual color
components. Fixes the selected format for the buffer in several odd
cases. For example, XRGB1555 has been reported as ARGB1555 because
of the different use of depth and transparency in VESA and Linux.

Bits-per-pixel is always the pixel's raw number of bits; including
alpha and filler bits. It is preferred over color depth, which has a
different meaning among various components and standards.

Also do not compare reserved bits and transparency bits to each other.
These values have different meanings, as reserved bits include filler
bits while transparency does not.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-2-tzimmermann@suse.de

drm/virtio: Spiff out cmd queue/response traces

Add a sequence # for more easily matching up cmd/resp, and the # of free
slots in the virtqueue to more easily see starvation issues.

v2: Fix handling of string fields as well

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130000841.318037-1-robdclark@gmail.com

drm/bridge: panel: Set pre_enable_prev_first from drmm_panel_bridge_add

Commit 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to drm_panel")
added code to copy prepare_prev_first from drm_panel to pre_enable_prev_first
in drm_bridge when called through devm_panel_bridge_add, but
missed drmm_panel_bridge_add.

Add the same code to drmm_panel_bridge_add.

Fixes: 5ea6b1702781 ("drm/panel: Add prepare_prev_first flag to drm_panel")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221222185213.3773336-1-dave.stevenson@raspberrypi.com

drm/vc4: drop all currently held locks if deadlock happens

If vc4_hdmi_reset_link() returns -EDEADLK, it means that a deadlock
happened in the locking context. This situation should be addressed by
dropping all currently held locks and block until the contended lock
becomes available. Currently, vc4 is not dealing with the deadlock
properly, producing the following output when PROVE_LOCKING is enabled:

[  825.612809] ------------[ cut here ]------------
[  825.612852] WARNING: CPU: 1 PID: 116 at drivers/gpu/drm/drm_modeset_lock.c:276 drm_modeset_drop_locks+0x60/0x68 [drm]
[  825.613458] Modules linked in: 8021q mrp garp stp llc
raspberrypi_cpufreq brcmfmac brcmutil crct10dif_ce hci_uart cfg80211
btqca btbcm bluetooth vc4 raspberrypi_hwmon snd_soc_hdmi_codec cec
clk_raspberrypi ecdh_generic drm_display_helper ecc rfkill
drm_dma_helper drm_kms_helper pwm_bcm2835 bcm2835_thermal bcm2835_rng
rng_core i2c_bcm2835 drm fuse ip_tables x_tables ipv6
[  825.613735] CPU: 1 PID: 116 Comm: kworker/1:2 Tainted: G        W 6.1.0-rc6-01399-g941aae326315 #3
[  825.613759] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[  825.613777] Workqueue: events output_poll_execute [drm_kms_helper]
[  825.614038] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  825.614063] pc : drm_modeset_drop_locks+0x60/0x68 [drm]
[  825.614603] lr : drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[  825.614829] sp : ffff800008313bf0
[  825.614844] x29: ffff800008313bf0 x28: ffffcd7778b8b000 x27: 0000000000000000
[  825.614883] x26: 0000000000000001 x25: 0000000000000001 x24: ffff677cc35c2758
[  825.614920] x23: ffffcd7707d01430 x22: ffffcd7707c3edc7 x21: 0000000000000001
[  825.614958] x20: 0000000000000000 x19: ffff800008313c10 x18: 000000000000b6d3
[  825.614995] x17: ffffcd777835e214 x16: ffffcd7777cef870 x15: fffff81000000000
[  825.615033] x14: 0000000000000000 x13: 0000000000000099 x12: 0000000000000002
[  825.615070] x11: 72917988020af800 x10: 72917988020af800 x9 : 72917988020af800
[  825.615108] x8 : ffff677cc665e0a8 x7 : d00a8c180000110c x6 : ffffcd77774c0054
[  825.615145] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[  825.615181] x2 : ffff677cc55e1880 x1 : ffffcd7777cef8ec x0 : ffff800008313c10
[  825.615219] Call trace:
[  825.615232]  drm_modeset_drop_locks+0x60/0x68 [drm]
[  825.615773]  drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[  825.616003]  output_poll_execute+0xe4/0x224 [drm_kms_helper]
[  825.616233]  process_one_work+0x2b4/0x618
[  825.616264]  worker_thread+0x24c/0x464
[  825.616288]  kthread+0xec/0x110
[  825.616310]  ret_from_fork+0x10/0x20
[  825.616335] irq event stamp: 7634
[  825.616349] hardirqs last  enabled at (7633): [<ffffcd777831ee90>] _raw_spin_unlock_irq+0x3c/0x78
[  825.616384] hardirqs last disabled at (7634): [<ffffcd7778315a78>] __schedule+0x134/0x9f0
[  825.616411] softirqs last  enabled at (7630): [<ffffcd7707aacea0>] local_bh_enable+0x4/0x30 [ipv6]
[  825.617019] softirqs last disabled at (7618): [<ffffcd7707aace70>] local_bh_disable+0x4/0x30 [ipv6]
[  825.617586] ---[ end trace 0000000000000000 ]---

Therefore, deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().

[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking

Fixes: 6bed2ea3cb38 ("drm/vc4: hdmi: Reset link on hotplug")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221229194638.178712-1-mcanal@igalia.com

drm/tiny: ili9486: Do not assume 8-bit only SPI controllers

The pixel data for the ILI9486 is always 16-bits wide and it must be
sent over the SPI bus. When the controller is only able to deal with
8-bit transfers, this 16-bits data needs to be swapped before the
sending to account for the big endian bus, this is on the contrary not
needed when the SPI controller already supports 16-bits transfers.

The decision about swapping the pixel data or not is taken in the MIPI
DBI code by probing the controller capabilities: if the controller only
suppors 8-bit transfers the data is swapped, otherwise it is not.

This swapping/non-swapping is relying on the assumption that when the
controller does support 16-bit transactions then the data is sent
unswapped in 16-bits-per-word over SPI.

The problem with the ILI9486 driver is that it is forcing 8-bit
transactions also for controllers supporting 16-bits, violating the
assumption and corrupting the pixel data.

Align the driver to what is done in the MIPI DBI code by adjusting the
transfer size to the maximum allowed by the SPI controller.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-2-f86b4463b9e4@baylibre.com

drm/tiny: ili9486: Enable driver module autoloading

SPI devices use the spi_device_id for module autoloading even on
systems using device tree.

Add the spi_device_id entry to enable autoloading for the 3.5inch RPi
Display (rpi-lcd-35 and piscreen).

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-1-f86b4463b9e4@baylibre.com

dt-bindings: display/panel: Add the Focaltech gpt3

Add bindings for the Forcaltech gpt3, which is a 640x480 3.0" 4:3
IPS LCD Panel found in the YLM/Anbernic RG300X handheld.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219195233.375637-3-cbranchereau@gmail.com

drm/panel: add the orisetech ota5601a

Add the orisetech ota5601a ic driver

For now it only supports the focaltech gpt3 3" 640x480 ips panel
found in the ylm rg300x handheld.

Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219195233.375637-2-cbranchereau@gmail.com

drm/todo: update the debugfs clean up task

The structs drm_debugfs_info and drm_debugfs_entry introduced a new
debugfs structure to DRM, centered on drm_device instead of drm_minor.
Therefore, remove the tasks related to create a new device-centered
debugfs structure and add a new task to replace the use of
drm_debugfs_create_files() for the use of drm_debugfs_add_file() and
drm_debugfs_add_files().

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-8-mcanal@igalia.com

drm/vkms: use new debugfs device-centered functions

Replace the use of drm_debugfs_create_files() with the new
drm_debugfs_add_files() function, which centers the debugfs files
management on the drm_device instead of drm_minor. Moreover, remove the
debugfs_init hook and add the debugfs files directly on vkms_create(),
before drm_dev_register().

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-7-mcanal@igalia.com

drm/v3d: use new debugfs device-centered functions

Replace the use of drm_debugfs_create_files() with the new
drm_debugfs_add_files() function, which centers the debugfs files
management on the drm_device instead of drm_minor.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-6-mcanal@igalia.com

drm/vc4: use new debugfs device-centered functions

Currently, vc4 has its own debugfs infrastructure that adds the debugfs
files on drm_dev_register(). With the introduction of the new debugfs,
functions, replace the vc4 debugfs structure with the DRM debugfs
device-centered function, drm_debugfs_add_file().

Moreover, remove the explicit error handling of debugfs related functions,
considering that the only failure mode is -ENOMEM and also that error
handling is not recommended for debugfs functions, as pointed out in [1].

[1] https://lore.kernel.org/all/YWAmZdRwnAt6wh9B@kroah.com/

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-5-mcanal@igalia.com

drm/debugfs: create debugfs late register functions

Although the device-centered debugfs functions can track requests for
the addition of DRM debugfs files at any time and have them added all
at once during drm_dev_register(), they are not able to create debugfs
files for modeset components, as they are registered after the primary
and the render drm_minor are registered.

So, create a drm_debugfs_late_register() function, which is responsible
for dealing with the creation of all the debugfs files for modeset
components at once. Therefore, the functions drm_debugfs_add_file()
and drm_debugfs_add_files() can be used in late_register hooks.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-4-mcanal@igalia.com

drm: use new debugfs device-centered functions on DRM core files

Replace the use of drm_debugfs_create_files() with the new
drm_debugfs_add_files() function in all DRM core files, centering the
debugfs files management on the drm_device instead of drm_minor.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-3-mcanal@igalia.com

drm/debugfs: create device-centered debugfs functions

Introduce the ability to track requests for the addition of DRM debugfs
files at any time and have them added all at once during
drm_dev_register().

Drivers can add DRM debugfs files to a device-managed list and, during
drm_dev_register(), all added files will be created at once.

Now, the drivers can use the functions drm_debugfs_add_file() and
drm_debugfs_add_files() to create DRM debugfs files instead of using the
drm_debugfs_create_files() function.

Co-developed-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-2-mcanal@igalia.com

drm/ast: Init iosys_map pointer as I/O memory for damage handling

Ast hardware scans out the primary plane from video memory, which
is in I/O-memory space. Hence init the damage handler's iosys_map
pointer as I/O memory.

Not all platforms support accessing I/O memory as system memory,
although it's usually not a problem in ast's x86-based systems.

The error report is at [1].

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: f2fa5a99ca81 ("drm/ast: Convert ast to SHMEM")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/lkml/202212170111.eInM0unS-lkp@intel.com/T/#u
Link: https://patchwork.freedesktop.org/patch/msgid/20221216193005.30280-1-tzimmermann@suse.de

drm/sprd: remove redundant error logging

A call to platform_get_irq() already prints an error on failure within
its own implementation. So printing another error based on its return
value in the caller is redundant and should be removed. The clean up
also makes if condition block braces unnecessary. Remove that as well.

Issue identified using platform_get_irq.cocci coccicheck script.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y5XhPJ39ipMCcctq@qemulion

drm/drv: Make use of local variable driver in drm_dev_register()

There is a local variable that contains dev->driver. Make use of it
instead of "open coding" it.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219183147.1639399-1-u.kleine-koenig@pengutronix.de

drm/qxl: stop using ttm_bo_wait

TTM is just wrapping core DMA functionality here, remove the mid-layer.
No functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-6-christian.koenig@amd.com

drm/v3d: replace obj lookup steps with drm_gem_objects_lookup

As v3d_lookup_bos() performs the same steps as drm_gem_objects_lookup(),
replace the explicit code in v3d to simply use the DRM function.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221205135538.3545051-3-mwen@igalia.com

drm/v3d: cleanup BOs properly when lookup_bos fails

When v3d_lookup_bos fails to `allocate validated BO pointers`,
job->bo_count was already set to args->bo_count, but job->bo points to
NULL. In this scenario, we must verify that job->bo is not NULL before
iterating on it to proper clean up a job. Also, drm_gem_object_put
already checks that the object passed is not NULL, doing the job->bo[i]
checker redundant.

Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221205135538.3545051-2-mwen@igalia.com

drm/imx: move IPUv3 driver into separate subdirectory

The IPUv3 and DCSS driver are two totally separate DRM drivers. Having
one of them live in the drivers/gpu/drm/imx toplevel directory and the
other one in the dcss/ subdirectory is confusing. Move the IPUv3 driver
into its own subdirectory to make the separation more clear.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20221125112519.3849636-1-l.stach@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125112519.3849636-1-l.stach@pengutronix.de

drm/imx: ipuv3-plane: Fix overlay plane width

ipu_src_rect_width() was introduced to support odd screen resolutions
such as 1366x768 by internally rounding up primary plane width to a
multiple of 8 and compensating with reduced horizontal blanking.
This also caused overlay plane width to be rounded up, which was not
intended. Fix overlay plane width by limiting the rounding up to the
primary plane.

drm_rect_width(&new_state->src) >> 16 is the same value as
drm_rect_width(dst) because there is no plane scaling support.

Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix")
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20221108141420.176696-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221108141420.176696-1-p.zabel@pengutronix.de

gpu: ipu-v3: common: Add of_node_put() for reference returned by of_graph_get_port_by_id()

In ipu_add_client_devices(), we need to call of_node_put() for
reference returned by of_graph_get_port_by_id() in fail path.

Fixes: 17e052175039 ("gpu: ipu-v3: Do not bail out on missing optional port nodes")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220720152227.1288413-1-windhl@126.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220720152227.1288413-1-windhl@126.com

drm/omap: dsi: Fix excessive stack usage

dsi_dump_dsi_irqs(), a function used for debugfs prints, has a large
struct in its frame, which can result in:

drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As the performance of the function is of no concern, let's allocate the
struct with kmalloc instead.

Compile-tested only.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916082206.167427-1-tomi.valkeinen@ideasonboard.com

drm/omapdrm: Remove unused struct csc_coef_rgb2yuv

After commit 64ff18911878, struct csc_coef_rgb2yuv is not used any more
and can be removed as well.

Fixes: 64ff18911878 ("drm/omap: Enable COLOR_ENCODING and COLOR_RANGE properties for planes")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014024810.21675-1-yuancan@huawei.com

drm: tidss: Fix pixel format definition

There was a long-standing bug from a typo that created 2 ARGB1555 and
ABGR1555 pixel format entries. Weston 10 has a sanity check that alerted
me to this issue.

According to the Supported Pixel Data formats table we have the later
entries should have been for Alpha-X instead.

Signed-off-by: Randolph Sapp <rs@ti.com>
Fixes: 32a1795f57eecc ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202001803.1765805-1-rs@ti.com

drm/tidss: Set max DMA segment size

We have no segment size limitations. Set to unlimited.

Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220823001634.11461-1-afd@ti.com

drm/display/dp_mst: Fix payload addition on a disconnected sink

If an MST stream is enabled on a disconnected sink, the payload for the
stream is not created and the MST manager's payload count/next start VC
slot is not updated. Since the payload's start VC slot may still contain
a valid value (!= -1) the subsequent disabling of such a stream could
cause an incorrect decrease of the payload count/next start VC slot in
drm_dp_remove_payload() and hence later payload additions will fail.

Fix the above by marking the payload as invalid in the above case, so
that it's skipped during payload removal. While at it add a debug print
for this case.

Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-3-imre.deak@intel.com

drm/display/dp_mst: Fix down message handling after a packet reception error

After an error during receiving a packet for a multi-packet DP MST
sideband message, the state tracking which packets have been received
already is not reset. This prevents the reception of subsequent down
messages (due to the pending message not yet completed with an
end-of-message-transfer packet).

Fix the above by resetting the reception state after a packet error.

Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-2-imre.deak@intel.com

drm/display/dp_mst: Fix down/up message handling after sink disconnect

If the sink gets disconnected during receiving a multi-packet DP MST AUX
down-reply/up-request sideband message, the state keeping track of which
packets have been received already is not reset. This results in a failed
sanity check for the subsequent message packet received after a sink is
reconnected (due to the pending message not yet completed with an
end-of-message-transfer packet), indicated by the

"sideband msg set header failed"

error.

Fix the above by resetting the up/down message reception state after a
disconnect event.

Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214184258.2869417-1-imre.deak@intel.com

drm: bridge: it66121: Add support for the IT6610

Add support for the IT6610 HDMI encoder.

The hardware is very similar, and therefore the driver did not require
too many changes. Some bits are only available on the IT66121, and
vice-versa. Also, the IT6610 requires specific polarities on the DE and
pixel lines.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214130131.12962-1-paul@crapouillou.net

drm: bridge: it66121: Move VID/PID to new it66121_chip_info structure

This will make it easier later to introduce support for new chips in
this driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214130122.12911-1-paul@crapouillou.net

drm: bridge: it66121: Set DDC preamble only once before reading EDID

The DDC preamble and target address only need to be set once before
reading the EDID, even if multiple segments have to be read.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-9-paul@crapouillou.net

drm: bridge: it66121: Don't clear DDC FIFO twice

The DDC FIFO was cleared before the loop in it66121_get_edid_block(),
and at the beginning of each iteration; which means that it did not have
to be cleared before the loop.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-8-paul@crapouillou.net

drm: bridge: it66121: Don't use DDC error IRQs

The DDC error IRQs will fire on the IT6610 every time the FIFO is empty,
which is not very helpful. To resolve this, we can simply disable them,
and handle DDC errors in it66121_wait_ddc_ready().

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-7-paul@crapouillou.net

drm: bridge: it66121: Fix wait for DDC ready

The function it66121_wait_ddc_ready() would previously read the status
register until "true", which means it never actually polled anything and
would just read the register once.

Now, it will properly wait until the DDC hardware is ready or until it
reported an error.

The 'busy' variable was also renamed to 'error' since these bits are set
on error and not when the DDC hardware is busy.

Since the DDC ready function is now working properly, the msleep(20) can
be removed.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-6-paul@crapouillou.net

drm: bridge: it66121: Write AVI infoframe with regmap_bulk_write()

Since all AVI infoframe registers are contiguous in the address space,
the AVI infoframe can be written in one go with regmap_bulk_write().

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-5-paul@crapouillou.net

drm: bridge: it66121: Use regmap_noinc_read()

Use regmap_noinc_read() instead of reading the data from the DDC FIFO one
byte at a time.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-4-paul@crapouillou.net

drm: bridge: it66121: Use devm_regulator_bulk_get_enable()

Simplify the code of the driver by using
devm_regulator_bulk_get_enable(), which will handle powering up the
regulators, and disabling them on probe error or module removal.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-3-paul@crapouillou.net

dt-bindings: display: bridge: it66121: Add compatible string for IT6610

Add a new ite,it6610 compatible string to the IT66121 binding
documentation, since the two chips are very similar.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214125821.12489-2-paul@crapouillou.net

drm/bridge: add it6505 driver to read data-lanes and link-frequencies from dt

Add driver to read data-lanes and link-frequencies from dt property to
restrict output bandwidth.

Signed-off-by: allen chen <allen.chen@ite.com.tw>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-3-allen.chen@ite.com.tw
Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-2-allen.chen@ite.com.tw
Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-3-allen.chen@ite.com.tw

dt-bindings: it6505: add properties to restrict output bandwidth

Currently there are no "upstream" users. So, no existing users to break.
Add properties to restrict dp output data-lanes and clock.

Signed-off-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: allen Chen <allen.chen@ite.com.tw>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103091243.96036-2-allen.chen@ite.com.tw

drm/bridge: it6505: Add caching for EDID

Add caching when EDID is read, and invalidate the cache until the
bridge detects HPD low or sink count changes on HPD_IRQ.

It takes 1.2s for IT6505 bridge to read a 3-block EDID, and skipping
one EDID read would be a notable difference on user experience.

Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115112720.911158-1-treapking@chromium.org

drm/bridge: lt9611: Fix PLL being unable to lock

This fixes PLL being unable to lock, and is derived from an equivalent
downstream commit.

Available LT9611 documentation does not list this register, neither does
LT9611UXC (which is a different chip).

This commit has been confirmed to fix HDMI output on DragonBoard 845c.

Suggested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221213150304.4189760-1-robert.foss@linaro.org

drm/vc4: dsi: Remove entry to ULPS from vc4_dsi post_disable

Post_disable was sending the D-PHY sequence to put any device
into ULPS suspend mode, and then cutting power to the DSI block.
The power-on reset state of the DSI block is for DSI to be in
an operational state, not ULPS, so it then never sent the sequence
for exiting ULPS. Any attached device that didn't have an external
reset therefore remained in ULPS / standby, and didn't function.

Use of ULPS isn't well specified in DRM, therefore remove entering
it to avoid the above situation.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-6-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: dsi: Convert to using a bridge instead of encoder

Remove the encoder functions, and create a bridge attached to
this dumb encoder which implements the same functionality.

As a bridge has state which an encoder doesn't, we need to
add the state management functions as well.

As there is no bridge atomic_mode_set, move the initialisation
code that was in mode_set into _pre_enable.
The code to actually enable and disable sending video are split
from the general control into _enable and _disable.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-5-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: dsi: Convert to use atomic operations

The atomic calls are preferred as the non-atomic ones
are deprecated. In preparation for conversion to a bridge,
switch to the atomic calls.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-4-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: dsi: Remove splitting the bridge chain from the driver

Splitting the bridge chain fails for atomic bridges as the
framework can't add the relevant state in
drm_atomic_add_encoder_bridges.
The chain was split because we needed to power up before
calling pre_enable, but that is now done in mode_set, and will
move into the framework.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-3-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: dsi: Move initialisation to encoder_mode_set

Breaking the bridge chain does not work for atomic bridges/panels
and generally causes issues.
We need to initialise the DSI host before the bridge pre_enables
are called, so move that to encoder_mode_set in the same way that
dw-mipi-dsi does.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-2-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: dsi: Rename bridge to out_bridge

In preparation for converting the encoder to being a bridge,
rename the variable holding the next bridge in the chain to
out_bridge, so that our bridge can be called bridge.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-dsi-bridge-v1-1-8f68ee0b0adb@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: Improve the KUnit documentation

The command-line can be expressed using a code-block, and we were
missing which architectures were available.

Suggested-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208094727.2848310-1-maxime@cerno.tech

drm/bridge: it6505: Guard bridge power in IRQ handler

Add a pair of pm_runtime_get_if_in_use and pm_runtime_put_sync in the
interrupt handler to make sure the bridge won't be powered off during
the interrupt handlings. Also remove the irq_lock mutex because it's not
guarding anything now.

Fixes: ab28896f1a83 ("drm/bridge: it6505: Improve synchronization between extcon subsystem")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221109095227.3320919-1-treapking@chromium.org

dt-bindings: display: panel: mipi-dbi-spi: Add io-supply

Add documentation for the new io-supply property, which specifies the
regulator for the I/O voltage supply on platforms where the panel
panel power and I/O supplies are separate.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201160245.2093816-4-otto.pflueger@abscue.de

drm/tiny: panel-mipi-dbi: Read I/O supply from DT

To support platforms with a separate I/O voltage supply, set the new
io_regulator property along with the regulator property of the DBI
device. Read the I/O supply from a new "io-supply" device tree
property.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201160245.2093816-3-otto.pflueger@abscue.de

drm/mipi-dbi: Support separate I/O regulator

The MIPI DBI specification defines separate vdd (panel power) and
vddi (I/O voltage) supplies. Displays that require different voltages
for the different supplies do exist, so the supplies cannot be
combined into one as they are now. Add a new io_regulator property to
the mipi_dbi_dev struct which can be set by the panel driver along
with the regulator property.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201160245.2093816-2-otto.pflueger@abscue.de

drm/i915: stop using ttm_bo_wait

TTM is just wrapping core DMA functionality here, remove the mid-layer.
No functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125102137.1801-7-christian.koenig@amd.com

drm/bridge: anx7625: keep last configure timing

Sometimes kernel may resume back quickly after suspend,
and DRM not call .mode_set() to re-config
display timing before calling .atomic_enable(), bridge
driver with this patch to keep last configure timing.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Acked-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209030418.713935-1-xji@analogixsemi.com

drm/bridge: ti-sn65dsi83: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-36-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: parade-ps8622: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-29-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: adv7511: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-15-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

Merge branch 'i2c/client_device_id_helper-immutable' of https://git./linux/kernel/git/wsa/linux into drm-misc-next

This branch has been applied to the I2C tree and others, and
is a dependency of a large series of changes switching many
drivers to use i2c_client_get_device_id.

drm: exynos: Remove #ifdef guards for PM related functions

Use the DEFINE_RUNTIME_DEV_PM_OPS(), SYSTEM_SLEEP_PM_OPS(),
RUNTIME_PM_OPS() and pm_ptr() macros to handle the runtime and suspend
PM callbacks.

These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_PM is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191733.137897-10-paul@crapouillou.net

drm/i915/gt: Remove #ifdef guards for PM related functions

Instead of defining two versions of intel_sysfs_rc6_init(), one for each
value of CONFIG_PM, add a check on !IS_ENABLED(CONFIG_PM) early in the
function. This will allow the compiler to automatically drop the dead
code when CONFIG_PM is disabled, without having to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-13-paul@crapouillou.net

drm: gm12u320: Remove #ifdef guards for PM related functions

Use the pm_ptr() macro to handle the .suspend / .resume / .reset_resume
callbacks.

This macro allows the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_PM is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch. It also allows to drop the
__maybe_unused tags.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-11-paul@crapouillou.net

drm: vboxvideo: Remove #ifdef guards for PM related functions

Use the pm_sleep_ptr() macro to handle the .suspend / .resume callbacks.

This macro allows the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-9-paul@crapouillou.net

drm: tilcdc: Remove #ifdef guards for PM related functions

Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle
the .suspend/.resume callbacks.

These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Jyri Sarha <jyri.sarhaı@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-8-paul@crapouillou.net

drm: shmobile: Remove #ifdef guards for PM related functions

Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle
the .suspend/.resume callbacks.

These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-6-paul@crapouillou.net

drm: rcar-du: Remove #ifdef guards for PM related functions

Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle
the .suspend/.resume callbacks.

These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-4-paul@crapouillou.net

drm: panfrost: Remove #ifdef guards for PM related functions

Use the EXPORT_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr() macros to handle
the PM callbacks.

These macros allow the PM functions to be automatically dropped by the
compiler when CONFIG_PM is disabled, without having to use #ifdef
guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191942.138244-3-paul@crapouillou.net

drm: imx/dcss: Remove #ifdef guards for PM related functions

Use the EXPORT_GPL_DEV_PM_OPS() and pm_ptr() macros to handle the PM
callbacks.

These macros allow the PM functions to be automatically dropped by the
compiler when CONFIG_PM is disabled, without having to use #ifdef
guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Tested-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191733.137897-11-paul@crapouillou.net

drm: atmel-hlcdc: Remove #ifdef guards for PM related functions

Use the DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to handle
the .suspend/.resume callbacks.

These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.

This has the advantage of always compiling these functions in,
independently of any Kconfig option. Thanks to that, bugs and other
regressions are subsequently easier to catch.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221129191733.137897-9-paul@crapouillou.net

drm/bridge: tfp410: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-38-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge/tc358775: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-35-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: tc358768: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-34-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: tc358767: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-33-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: sii8620: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-32-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: sii9234: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-31-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: sii902x: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-30-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: nxp-ptn3460: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-28-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: megachips: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-27-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt9611uxc: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-26-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt9611: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-25-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt9211: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-24-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt8912b: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-23-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: it66121: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-22-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: it6505: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-21-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: icn6211: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-19-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: anx7625: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-18-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge/analogix/anx78xx: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-17-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge/analogix/anx6345: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-16-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: lt8912b: Add hot plug detection

Enable hot plug detection when it is available on the HDMI port.
Without this connecting to a different monitor with incompatible timing
before the 10 seconds poll period will lead to a broken display output.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128112320.25708-1-francesco@dolcini.it

drm/bridge: chrontel-ch7033: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/all/20221118224540.619276-20-uwe@kleine-koenig.org/

drm/gud: Fix missing include

Add missing vmalloc.h include.

Fixes: c17d048609bf ("drm/gud: Use the shadow plane helper")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207-gud-missing-include-v1-0-c5b32c9c59da@tronnes.org

drm/bridge: Document the expected behaviour of DSI host controllers

The exact behaviour of DSI host controllers is not specified,
therefore define it.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221205173328.1395350-7-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/panel: Add prepare_prev_first flag to drm_panel

Mapping to the drm_bridge flag pre_enable_prev_first,
add a new flag prepare_prev_first to drm_panel to allow
the panel driver to request that the upstream bridge should
be pre_enabled before the panel prepare.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221205173328.1395350-6-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/bridge: Introduce pre_enable_prev_first to alter bridge init order

DSI sink devices typically want the DSI host powered up and configured
before they are powered up. pre_enable is the place this would normally
happen, but they are called in reverse order from panel/connector towards
the encoder, which is the "wrong" order.

Add a new flag pre_enable_prev_first that any bridge can set
to swap the order of pre_enable (and post_disable) for that and the
immediately previous bridge.
Should the immediately previous bridge also set the
pre_enable_prev_first flag, the previous bridge to that will be called
before either of those which requested pre_enable_prev_first.

eg:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
Would result in pre_enable's being called as Panel, Bridge 1, Bridge 3,
Bridge 2, Bridge 6, Bridge 5, Bridge 4, Encoder.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20221205173328.1395350-5-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/bridge: Drop unused drm_bridge_chain functions

The drm_bridge_chain_{pre_enable,enable,disable,post_disable} has no
users left and we have atomic variants that should be used.
Drop them so they do not gain new users.

Adjust a few comments to avoid references to the dropped functions.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221205173328.1395350-4-dave.stevenson@raspberrypi.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>