review.tizen.org Git - platform/kernel/linux-rpi.git/log

selftests: mptcp: sockopt: use 'iptables-legacy' if available

IPTables commands using 'iptables-nft' fail on old kernels, at least
on v5.15 because it doesn't see the default IPTables chains:

$ iptables -L
iptables/1.8.2 Failed to initialize nft: Protocol not supported

As a first step before switching to NFTables, we can use iptables-legacy
if available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mptcp: connect: fail if nft supposed to work

In case of "external" errors when preparing the environment for the
TProxy tests, the subtests were marked as skipped.

This is fine but it means these errors are ignored. On MPTCP Public CI,
we do want to catch such issues and mark the selftest as failed if there
are such issues. We can then use mptcp_lib_fail_if_expected_feature()
helper that has been recently added to fail if needed.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5fb62e9cd3ad ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: do not rely on implicit state check in mptcp_listen()

Since the blamed commit, closing the first subflow resets the first
subflow socket state to SS_UNCONNECTED.

The current mptcp listen implementation relies only on such
state to prevent touching not-fully-disconnected sockets.

Incoming mptcp fastclose (or paired endpoint removal) unconditionally
closes the first subflow.

All the above allows an incoming fastclose followed by a listen() call
to successfully race with a blocking recvmsg(), potentially causing the
latter to hit a divide by zero bug in cleanup_rbuf/__tcp_select_window().

Address the issue explicitly checking the msk socket state in
mptcp_listen(). An alternative solution would be moving the first
subflow socket state update into mptcp_disconnect(), but in the long
term the first subflow socket should be removed: better avoid relaying
on it for internal consistency check.

Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/414
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: ensure subflow is unhashed before cleaning the backlog

While tacking care of the mptcp-level listener I unintentionally
moved the subflow level unhash after the subflow listener backlog
cleanup.

That could cause some nasty race and makes the code harder to read.

Address the issue restoring the proper order of operations.

Fixes: 57fc0f1ceaa4 ("mptcp: ensure listener is unhashed before updating the sk status")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: Fix vipa deletion

Change boolean parameter of function "qeth_l3_vipa_store" inside the
"qeth_l3_dev_vipa_del4_store" function from "true" to "false" because
"true" is used for adding a virtual ip address and "false" for deleting.

Fixes: 2390166a6b45 ("s390/qeth: clean up L3 sysfs code")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx-af: fix hardware timestamp configuration

MAC block on CN10K (RPM) supports hardware timestamp configuration. The
previous patch which added timestamp configuration support has a bug.
Though the netdev driver requests to disable timestamp configuration,
the driver is always enabling it.

This patch fixes the same.

Fixes: d1489208681d ("octeontx2-af: cn10k: RPM hardware timestamp configuration")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'dsa-ll-fixes'

Vladimir Oltean says:

====================
dsa: Fix mangled link-local MAC DAs with SJA1105 DSA

The SJA1105 hardware tagging protocol is weird and will put DSA
information (source port, switch ID) in the MAC DA of the packets sent
to the CPU, and then send some additional (meta) packets which contain
the original bytes from the previous packet's MAC DA.

The tagging protocol driver contains logic to handle this, but the meta
frames are optional functionality, and there are configurations when
they aren't received (no PTP RX timestamping). Thus, the MAC DA from
packets sent to the stack is not correct in all cases.

Also, during testing it was found that the MAC DA patching procedure was
incorrect.

The investigation comes as a result of this discussion with Paolo:
https://lore.kernel.org/netdev/f494387c8d55d9b1d5a3e88beedeeb448f2e6cc3.camel@redhat.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: always enable the send_meta options

incl_srcpt has the limitation, mentioned in commit b4638af8885a ("net:
dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a
MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless
PTP RX timestamping is enabled.

The incl_srcpt option was initially unconditionally enabled, then that
changed with commit 42824463d38d ("net: dsa: sja1105: Limit use of
incl_srcpt to bridge+vlan mode"), then again with b4638af8885a ("net:
dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that
it now needs to be always enabled, otherwise the driver does not have a
reliable source of information regarding source_port and switch_id for
link-local traffic (tag_8021q VLANs may be imprecise since now they
identify an entire bridging domain when ports are not standalone).

If we accept that PTP RX timestamping (and therefore, meta frame
generation) is always enabled in hardware, then that limitation could be
avoided and packets with any MAC DA can be properly received, because
meta frames do contain the original bytes from the MAC DA of their
associated link-local packet.

This change enables meta frame generation unconditionally, which also
has the nice side effects of simplifying the switch control path
(a switch reset is no longer required on hwtstamping settings change)
and the tagger data path (it no longer needs to be informed whether to
expect meta frames or not - it always does).

Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_sja1105: fix MAC DA patching from meta frames

The SJA1105 manual says that at offset 4 into the meta frame payload we
have "MAC destination byte 2" and at offset 5 we have "MAC destination
byte 1". These are counted from the LSB, so byte 1 is h_dest[ETH_HLEN-2]
aka h_dest[4] and byte 2 is h_dest[ETH_HLEN-3] aka h_dest[3].

The sja1105_meta_unpack() function decodes these the other way around,
so a frame with MAC DA 01:80:c2:11:22:33 is received by the network
stack as having 01:80:c2:22:11:33.

Fixes: e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Replace strlcpy with strscpy

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

pptp: Fix fib lookup calls.

PPTP uses pppox sockets (struct pppox_sock). These sockets don't embed
an inet_sock structure, so it's invalid to call inet_sk() on them.

Therefore, the ip_route_output_ports() call in pptp_connect() has two
problems:

  * The tos variable is set with RT_CONN_FLAGS(sk), which calls
    inet_sk() on the pppox socket.

  * ip_route_output_ports() tries to retrieve routing flags using
    inet_sk_flowi_flags(), which is also going to call inet_sk() on the
    pppox socket.

While PPTP doesn't use inet sockets, it's actually really layered on
top of IP and therefore needs a proper way to do fib lookups. So let's
define pptp_route_output() to get a struct rtable from a pptp socket.
Let's also replace the ip_route_output_ports() call of pptp_xmit() for
consistency.

In practice, this means that:

  * pptp_connect() sets ->flowi4_tos and ->flowi4_flags to zero instead
    of using bits of unrelated struct pppox_sock fields.

  * pptp_xmit() now respects ->sk_mark and ->sk_uid.

  * pptp_xmit() now calls the security_sk_classify_flow() security
    hook, thus allowing to set ->flowic_secid.

  * pptp_xmit() now passes the pppox socket to xfrm_lookup_route().

Found by code inspection.

Fixes: 00959ade36ac ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check

The mlxsw_sp_crif_alloc() function returns NULL on error. It doesn't
return error pointers. Fix the check.

Fixes: 78126cfd5dc9 ("mlxsw: spectrum_router: Maintain CRIF for fallback loopback RIF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX

The attribute TCA_PEDIT_PARMS_EX is not be included in pedit_policy and
one malicious user could fake a TCA_PEDIT_PARMS_EX whose length is
smaller than the intended sizeof(struct tc_pedit). Hence, the
dereference in tcf_pedit_init() could access dirty heap data.

static int tcf_pedit_init(...)
{
  // ...
  pattr = tb[TCA_PEDIT_PARMS]; // TCA_PEDIT_PARMS is included
  if (!pattr)
    pattr = tb[TCA_PEDIT_PARMS_EX]; // but this is not

  // ...
  parm = nla_data(pattr);

  index = parm->index; // parm is able to be smaller than 4 bytes
                       // and this dereference gets dirty skb_buff
                       // data created in netlink_sendmsg
}

This commit adds TCA_PEDIT_PARMS_EX length in pedit_policy which avoid
the above case, just like the TCA_PEDIT_PARMS.

Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230703110842.590282-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported

The .adjphase operation is an operation that is implemented only by certain
PHCs. The sysfs device attribute node for querying the maximum phase
adjustment supported should not be exposed on devices that do not support
.adjphase.

Fixes: c3b60ab7a4df ("ptp: Add .getmaxphase callback to ptp_clock_info")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/netdev/20230627162146.GA114473@dev-arch.thelio-3990X/
Link: https://lore.kernel.org/all/CA+G9fYtKCZeAUTtwe69iK8Xcz1mOKQzwcy49wd+imZrfj6ifXA@mail.gmail.com/
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Message-ID: <20230627232139.213130-1-rrameshbabu@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Documentation: ABI: sysfs-class-net-qmi: pass_through contact update

Switch to the quicinc.com id.

Fixes: bd1af6b5fffd ("Documentation: ABI: sysfs-class-net-qmi: document pass-through file")
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: annotate data races in __tcp_oow_rate_limited()

request sockets are lockless, __tcp_oow_rate_limited() could be called
on the same object from different cpus. This is harmless.

Add READ_ONCE()/WRITE_ONCE() annotations to avoid a KCSAN report.

Fixes: 4ce7e93cb3fe ("tcp: rate limit ACK sent by SYN_RECV request sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'wireguard-fixes'

Jason A. Donenfeld says:

====================
wireguard fixes for 6.4.2/6.5-rc1

Sorry to send these patches during the merge window, but they're net
fixes, not netdev enhancements, and while I'd ordinarily wait anyway,
I just got a first bug report for one of these fixes, which I originally
had thought was mostly unlikely. So please apply the following three
patches to net:

1) Make proper use of nr_cpu_ids with cpumask_next(), rather than
   awkwardly using modulo, to handle dynamic CPU topology changes.
   Linus noticed this a while ago and pointed it out, and today a user
   actually got hit by it.

2) Respect persistent keepalive and other staged packets when setting
   the private key after the interface is already up.

3) Use timer_delete_sync() instead of del_timer_sync(), per the
   documentation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: timers: move to using timer_delete_sync

The documentation says that del_timer_sync is obsolete, and code should
use the equivalent timer_delete_sync instead, so switch to it.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: netlink: send staged packets when setting initial private key

Packets bound for peers can queue up prior to the device private key
being set. For example, if persistent keepalive is set, a packet is
queued up to be sent as soon as the device comes up. However, if the
private key hasn't been set yet, the handshake message never sends, and
no timer is armed to retry, since that would be pointless.

But, if a user later sets a private key, the expectation is that those
queued packets, such as a persistent keepalive, are actually sent. So
adjust the configuration logic to account for this edge case, and add a
test case to make sure this works.

Maxim noticed this with a wg-quick(8) config to the tune of:

    [Interface]
    PostUp = wg set %i private-key somefile

    [Peer]
    PublicKey = ...
    Endpoint = ...
    PersistentKeepalive = 25

Here, the private key gets set after the device comes up using a PostUp
script, triggering the bug.

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Reported-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Tested-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Link: https://lore.kernel.org/wireguard/87fs7xtqrv.fsf@gmail.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: queueing: use saner cpu selection wrapping

Using `% nr_cpumask_bits` is slow and complicated, and not totally
robust toward dynamic changes to CPU topologies. Rather than storing the
next CPU in the round-robin, just store the last one, and also return
that value. This simplifies the loop drastically into a much more common
pattern.

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Manuel Leiner <manuel.leiner@gmx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

samples: pktgen: fix append mode failed issue

Each sample script sources functions.sh before parameters.sh
which makes $APPEND undefined when trapping EXIT no matter in
append mode or not. Due to this when sample scripts finished
they always do "pgctrl reset" which resets pktgen config.

So move trap to each script after sourcing parameters.sh
and trap EXIT explicitly.

Signed-off-by: J.J. Martzki <mars14850@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: Add xt_policy config for xfrm_policy test

When running Kselftests with the current selftests/net/config
the following problem can be seen with the net:xfrm_policy.sh
selftest:

  # selftests: net: xfrm_policy.sh
  [   41.076721] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
  [   41.094787] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
  [   41.107635] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
  # modprobe: FATAL: Module ip_tables not found in directory /lib/modules/6.1.36
  # iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
  # Perhaps iptables or your kernel needs to be upgraded.
  # modprobe: FATAL: Module ip_tables not found in directory /lib/modules/6.1.36
  # iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
  # Perhaps iptables or your kernel needs to be upgraded.
  # SKIP: Could not insert iptables rule
  ok 1 selftests: net: xfrm_policy.sh # SKIP

This is because IPsec "policy" match support is not available
to the kernel.

This patch adds CONFIG_NETFILTER_XT_MATCH_POLICY as a module
to the selftests/net/config file, so that `make
kselftest-merge` can take this into consideration.

Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix net_dev_start_xmit trace event vs skb_transport_offset()

After blamed commit, we must be more careful about using
skb_transport_offset(), as reminded us by syzbot:

WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline]
WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14
Modules linked in:
CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
RIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline]
RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14
Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ff
RSP: 0018:ffffc900002bf700 EFLAGS: 00010293
RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280
RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff
RBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5e
R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67
R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
[<ffffffff84715e35>] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline]
[<ffffffff84715e35>] xmit_one net/core/dev.c:3643 [inline]
[<ffffffff84715e35>] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660
[<ffffffff8471a232>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff85416493>] dev_queue_xmit include/linux/netdevice.h:3030 [inline]
[<ffffffff85416493>] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108
[<ffffffff85416744>] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
[<ffffffff853bc52a>] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline]
[<ffffffff853bc52a>] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline]
[<ffffffff853bc52a>] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701
[<ffffffff8151023c>] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289
[<ffffffff81511938>] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436

Fixes: 66e4c8d95008 ("net: warn if transport header was not set")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: tag_sja1105: fix source port decoding in vlan_filtering=0 bridge mode

There was a regression introduced by the blamed commit, where pinging to
a VLAN-unaware bridge would fail with the repeated message "Couldn't
decode source port" coming from the tagging protocol driver.

When receiving packets with a bridge_vid as determined by
dsa_tag_8021q_bridge_join(), dsa_8021q_rcv() will decode:
- source_port = 0 (which isn't really valid, more like "don't know")
- switch_id = 0 (which isn't really valid, more like "don't know")
- vbid = value in range 1-7

Since the blamed patch has reversed the order of the checks, we are now
going to believe that source_port != -1 and switch_id != -1, so they're
valid, but they aren't.

The minimal solution to the problem is to only populate source_port and
switch_id with what dsa_8021q_rcv() came up with, if the vbid is zero,
i.e. the source port information is trustworthy.

Fixes: c1ae02d87689 ("net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bridge: keep ports without IFF_UNICAST_FLT in BR_PROMISC mode

According to the synchronization rules for .ndo_get_stats() as seen in
Documentation/networking/netdevices.rst, acquiring a plain spin_lock()
should not be illegal, but the bridge driver implementation makes it so.

After running these commands, I am being faced with the following
lockdep splat:

$ ip link add link swp0 name macsec0 type macsec encrypt on && ip link set swp0 up
$ ip link add dev br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set macsec0 master br0 && ip link set macsec0 up

  ========================================================
  WARNING: possible irq lock inversion dependency detected
  6.4.0-04295-g31b577b4bd4a #603 Not tainted
  --------------------------------------------------------
  swapper/1/0 just changed the state of lock:
  ffff6bd348724cd8 (&br->lock){+.-.}-{3:3}, at: br_forward_delay_timer_expired+0x34/0x198
  but this lock took another, SOFTIRQ-unsafe lock in the past:
   (&ocelot->stats_lock){+.+.}-{3:3}

  and interrupts could create inverse lock ordering between them.

  other info that might help us debug this:
  Chain exists of:
    &br->lock --> &br->hash_lock --> &ocelot->stats_lock

   Possible interrupt unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(&ocelot->stats_lock);
                                 local_irq_disable();
                                 lock(&br->lock);
                                 lock(&br->hash_lock);
    <Interrupt>
      lock(&br->lock);

   *** DEADLOCK ***

(details about the 3 locks skipped)

swp0 is instantiated by drivers/net/dsa/ocelot/felix.c, and this
only matters to the extent that its .ndo_get_stats64() method calls
spin_lock(&ocelot->stats_lock).

Documentation/locking/lockdep-design.rst says:

| A lock is irq-safe means it was ever used in an irq context, while a lock
| is irq-unsafe means it was ever acquired with irq enabled.

(...)

| Furthermore, the following usage based lock dependencies are not allowed
| between any two lock-classes::
|
|    <hardirq-safe>   ->  <hardirq-unsafe>
|    <softirq-safe>   ->  <softirq-unsafe>

Lockdep marks br->hash_lock as softirq-safe, because it is sometimes
taken in softirq context (for example br_fdb_update() which runs in
NET_RX softirq), and when it's not in softirq context it blocks softirqs
by using spin_lock_bh().

Lockdep marks ocelot->stats_lock as softirq-unsafe, because it never
blocks softirqs from running, and it is never taken from softirq
context. So it can always be interrupted by softirqs.

There is a call path through which a function that holds br->hash_lock:
fdb_add_hw_addr() will call a function that acquires ocelot->stats_lock:
ocelot_port_get_stats64(). This can be seen below:

ocelot_port_get_stats64+0x3c/0x1e0
felix_get_stats64+0x20/0x38
dsa_slave_get_stats64+0x3c/0x60
dev_get_stats+0x74/0x2c8
rtnl_fill_stats+0x4c/0x150
rtnl_fill_ifinfo+0x5cc/0x7b8
rtmsg_ifinfo_build_skb+0xe4/0x150
rtmsg_ifinfo+0x5c/0xb0
__dev_notify_flags+0x58/0x200
__dev_set_promiscuity+0xa0/0x1f8
dev_set_promiscuity+0x30/0x70
macsec_dev_change_rx_flags+0x68/0x88
__dev_set_promiscuity+0x1a8/0x1f8
__dev_set_rx_mode+0x74/0xa8
dev_uc_add+0x74/0xa0
fdb_add_hw_addr+0x68/0xd8
fdb_add_local+0xc4/0x110
br_fdb_add_local+0x54/0x88
br_add_if+0x338/0x4a0
br_add_slave+0x20/0x38
do_setlink+0x3a4/0xcb8
rtnl_newlink+0x758/0x9d0
rtnetlink_rcv_msg+0x2f0/0x550
netlink_rcv_skb+0x128/0x148
rtnetlink_rcv+0x24/0x38

the plain English explanation for it is:

The macsec0 bridge port is created without p->flags & BR_PROMISC,
because it is what br_manage_promisc() decides for a VLAN filtering
bridge with a single auto port.

As part of the br_add_if() procedure, br_fdb_add_local() is called for
the MAC address of the device, and this results in a call to
dev_uc_add() for macsec0 while the softirq-safe br->hash_lock is taken.

Because macsec0 does not have IFF_UNICAST_FLT, dev_uc_add() ends up
calling __dev_set_promiscuity() for macsec0, which is propagated by its
implementation, macsec_dev_change_rx_flags(), to the lower device: swp0.
This triggers the call path:

dev_set_promiscuity(swp0)
-> rtmsg_ifinfo()
   -> dev_get_stats()
      -> ocelot_port_get_stats64()

with a calling context that lockdep doesn't like (br->hash_lock held).

Normally we don't see this, because even though many drivers that can be
bridge ports don't support IFF_UNICAST_FLT, we need a driver that

(a) doesn't support IFF_UNICAST_FLT, *and*
(b) it forwards the IFF_PROMISC flag to another driver, and
(c) *that* driver implements ndo_get_stats64() using a softirq-unsafe
    spinlock.

Condition (b) is necessary because the first __dev_set_rx_mode() calls
__dev_set_promiscuity() with "bool notify=false", and thus, the
rtmsg_ifinfo() code path won't be entered.

The same criteria also hold true for DSA switches which don't report
IFF_UNICAST_FLT. When the DSA master uses a spin_lock() in its
ndo_get_stats64() method, the same lockdep splat can be seen.

I think the deadlock possibility is real, even though I didn't reproduce
it, and I'm thinking of the following situation to support that claim:

fdb_add_hw_addr() runs on a CPU A, in a context with softirqs locally
disabled and br->hash_lock held, and may end up attempting to acquire
ocelot->stats_lock.

In parallel, ocelot->stats_lock is currently held by a thread B (say,
ocelot_check_stats_work()), which is interrupted while holding it by a
softirq which attempts to lock br->hash_lock.

Thread B cannot make progress because br->hash_lock is held by A. Whereas
thread A cannot make progress because ocelot->stats_lock is held by B.

When taking the issue at face value, the bridge can avoid that problem
by simply making the ports promiscuous from a code path with a saner
calling context (br->hash_lock not held). A bridge port without
IFF_UNICAST_FLT is going to become promiscuous as soon as we call
dev_uc_add() on it (which we do unconditionally), so why not be
preemptive and make it promiscuous right from the beginning, so as to
not be taken by surprise.

With this, we've broken the links between code that holds br->hash_lock
or br->lock and code that calls into the ndo_change_rx_flags() or
ndo_get_stats64() ops of the bridge port.

Fixes: 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'octeontx2-af-fixes'

Hariprasad Kelam says:

====================
octeontx2-af: MAC block fixes for CN10KB

This patch set contains fixes for the issues encountered in testing
CN10KB MAC block RPM_USX.

Patch1: firmware to kernel communication is not working due to wrong
        interrupt configuration. CSR addresses are corrected.

Patch2: NIX to RVU PF mapping errors encountered due to wrong firmware
        config. Corrects this mapping error.

Patch3: Driver is trying to access non exist cgx/lmac which is resulting
        in kernel panic. Address this issue by adding proper checks.

Patch4: MAC features are not getting reset on FLR. Fix the issue by
        resetting the stale config.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: Reset MAC features in FLR

AF driver configures MAC features like internal loopback and PFC upon
receiving the request from PF and its VF netdev. But these
features are not getting reset in FLR. This patch fixes the issue by
resetting the same.

Fixes: 23999b30ae67 ("octeontx2-af: Enable or disable CGX internal loopback")
Fixes: 1121f6b02e7a ("octeontx2-af: Priority flow control configuration support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: Add validation before accessing cgx and lmac

with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.

This patch fixes the issue by adding proper checks.

[   23.219150] pc : cgx_lmac_read+0x38/0x70
[   23.219154] lr : rvu_program_channels+0x3f0/0x498
[   23.223852] sp : ffff000100d6fc80
[   23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[   23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000

Fixes: 91c6945ea1f9 ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: Fix mapping for NIX block from CGX connection

Firmware configures NIX block mapping for all MAC blocks.
The current implementation reads the configuration and
creates the mapping between RVU PF and NIX blocks. But
this configuration is only valid for silicons that support
multiple blocks. For all other silicons, all MAC blocks
map to NIX0.

This patch corrects the mapping by adding a check for the same.

Fixes: c5a73b632b90 ("octeontx2-af: Map NIX block from CGX connection")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-af: cn10kb: fix interrupt csr addresses

The current design is that, for asynchronous events like link_up and
link_down firmware raises the interrupt to kernel. The previous patch
which added RPM_USX driver has a bug where it uses old csr addresses
for configuring interrupts. Which is resulting in losing interrupts
from source firmware.

This patch fixes the issue by correcting csr addresses.

Fixes: b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nvme-tcp: Fix comma-related oops

Fix a comma that should be a semicolon.  The comma is at the end of an
if-body and thus makes the statement after (a bvec_set_page()) conditional
too, resulting in an oops because we didn't fill out the bio_vec[]:

    BUG: kernel NULL pointer dereference, address: 0000000000000008
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    ...
    Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
    RIP: 0010:skb_splice_from_iter+0xf1/0x370
    ...
    Call Trace:
     tcp_sendmsg_locked+0x3a6/0xdd0
     tcp_sendmsg+0x31/0x50
     inet_sendmsg+0x47/0x80
     sock_sendmsg+0x99/0xb0
     nvme_tcp_try_send_data+0x149/0x490 [nvme_tcp]
     nvme_tcp_try_send+0x1b7/0x300 [nvme_tcp]
     nvme_tcp_io_work+0x40/0xc0 [nvme_tcp]
     process_one_work+0x21c/0x430
     worker_thread+0x54/0x3e0
     kthread+0xf8/0x130

Fixes: 7769887817c3 ("nvme-tcp: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage")
Reported-by: Aurelien Aptel <aaptel@nvidia.com>
Link: https://lore.kernel.org/r/253mt0il43o.fsf@mtr-vdi-124.i-did-not-set--mail-host-address--so-tickle-me/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Sagi Grimberg <sagi@grimberg.me>
cc: Willem de Bruijn <willemb@google.com>
cc: Keith Busch <kbusch@kernel.org>
cc: Jens Axboe <axboe@fb.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Chaitanya Kulkarni <kch@nvidia.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-nvme@lists.infradead.org
cc: netdev@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: networking: Update codeaurora references for rmnet

source.codeaurora.org is no longer accessible and so the reference link
in the documentation is not useful. Use iproute2 instead as it has a
rmnet module for configuration.

Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

docs: netdev: broaden mailbot to all MAINTAINERS

Reword slightly now that all MAINTAINERS have access to the commands.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: cdc_ether: add u-blox 0x1313 composition.

Add CDC-ECM support for LARA-R6 01B.

The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 configurations (default, RmNet, ECM)
are the same.

In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface

Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_init

The line cards array is not freed in the error path of
mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by
freeing the array in the error path, thereby making the error path
identical to mlxsw_m_linecards_fini().

Fixes: 01328e23a476 ("mlxsw: minimal: Extend module to port mapping with slot index")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230630012647.1078002-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: vsc73xx: fix MTU configuration

Switch in MAXLEN register stores the maximum size of a data frame.
The MTU size is 18 bytes smaller than the frame size.

The current settings are causing problems with packet forwarding.
This patch fixes the MTU settings to proper values.

Fixes: fb77ffc6ec86 ("net: dsa: vsc73xx: make the MTU configurable")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230628194327.1765644-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ibmvnic: Do not reset dql stats on NON_FATAL err

All ibmvnic resets, make a call to netdev_tx_reset_queue() when
re-opening the device. netdev_tx_reset_queue() resets the num_queued
and num_completed byte counters. These stats are used in Byte Queue
Limit (BQL) algorithms. The difference between these two stats tracks
the number of bytes currently sitting on the physical NIC. ibmvnic
increases the number of queued bytes though calls to
netdev_tx_sent_queue() in the drivers xmit function. When, VIOS reports
that it is done transmitting bytes, the ibmvnic device increases the
number of completed bytes through calls to netdev_tx_completed_queue().
It is important to note that the driver batches its transmit calls and
num_queued is increased every time that an skb is added to the next
batch, not necessarily when the batch is sent to VIOS for transmission.

Unlike other reset types, a NON FATAL reset will not flush the sub crq
tx buffers. Therefore, it is possible for the batched skb array to be
partially full. So if there is call to netdev_tx_reset_queue() when
re-opening the device, the value of num_queued (0) would not account
for the skb's that are currently batched. Eventually, when the batch
is sent to VIOS, the call to netdev_tx_completed_queue() would increase
num_completed to a value greater than the num_queued. This causes a
BUG_ON crash:

ibmvnic 30000002: Firmware reports error, cause: adapter problem.
Starting recovery...
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:27!
Oops: Exception in kernel mode, sig: 5
[....]
NIP dql_completed+0x28/0x1c0
LR ibmvnic_complete_tx.isra.0+0x23c/0x420 [ibmvnic]
Call Trace:
ibmvnic_complete_tx.isra.0+0x3f8/0x420 [ibmvnic] (unreliable)
ibmvnic_interrupt_tx+0x40/0x70 [ibmvnic]
__handle_irq_event_percpu+0x98/0x270
---[ end trace ]---

Therefore, do not reset the dql stats when performing a NON_FATAL reset.

Fixes: 0d973388185d ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sfc: support for devlink port requires MAE access

On systems without MAE permission efx->mae is not initialised,
and trying to lookup an mport results in a NULL pointer
dereference.

Fixes: 25414b2a64ae ("sfc: add devlink port support for ef100")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'bluetooth-fixes-from-next'

Cherry-pick what looks like safe fixes from the bluetooth
net-next PR. The other changes will have to wait for 6.6

Link: https://lore.kernel.org/all/20230627191004.2586540-1-luiz.dentz@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: hci_event: Fix parsing of CIS Established Event

The ISO Interval on CIS Established Event uses 1.25 ms slots:

    BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
    page 2304:

      Time = N * 1.25 ms

In addition to that this always update the QoS settings based on CIS
Established Event.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: hci_conn: Use kmemdup() to replace kzalloc + memcpy

Use kmemdup rather than duplicating its implementation.

./net/bluetooth/hci_conn.c:1880:7-14: WARNING opportunity for kmemdup.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5597
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: btusb: Add MT7922 bluetooth ID for the Asus Ally

Adding the device ID from the Asus Ally gets the bluetooth working
on the device.

Signed-off-by: Matthew Anderson <ruinairas1992@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: hci_sysfs: make bt_class a static const structure

Now that the driver core allows for struct class to be in read-only
memory, move the bt_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: ISO: Rework sync_interval to be sync_factor

This rework sync_interval to be sync_factor as having sync_interval in
the order of seconds is sometimes not disarable.

Wit sync_factor the application can tell how many SDU intervals it wants
to send an announcement with PA, the EA interval is set to 2 times that
so a factor of 24 of BIG SDU interval of 10ms would look like the
following:

< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
        Handle: 0x01
        Properties: 0x0000
        Min advertising interval: 480.000 msec (0x0300)
        Max advertising interval: 480.000 msec (0x0300)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: Host has no preference (0x7f)
        Primary PHY: LE 1M (0x01)
        Secondary max skip: 0x00
        Secondary PHY: LE 2M (0x02)
        SID: 0x00
        Scan request notifications: Disabled (0x00)
< HCI Command: LE Set Periodic Advertising Parameters (0x08|0x003e) plen 7
        Handle: 1
        Min interval: 240.00 msec (0x00c0)
        Max interval: 240.00 msec (0x00c0)
        Properties: 0x0000

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: MGMT: Fix marking SCAN_RSP as not connectable

When receiving a scan response there is no way to know if the remote
device is connectable or not, so when it cannot be merged don't
make any assumption and instead just mark it with a new flag defined as
MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone
SCAN_RSP.

Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/
Fixes: c70a7e4cc8d2 ("Bluetooth: Add support for Not Connectable flag for Device Found events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: hci_event: fix Set CIG Parameters error status handling

If the event has error status, return right error code and don't show
incorrect "response malformed" messages.

Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: ISO: use hci_sync for setting CIG parameters

When reconfiguring CIG after disconnection of the last CIS, LE Remove
CIG shall be sent before LE Set CIG Parameters. Otherwise, it fails
because CIG is in the inactive state and not configurable (Core v5.3
Vol 6 Part B Sec. 4.5.14.3). This ordering is currently wrong under
suitable timing conditions, because LE Remove CIG is sent via the
hci_sync queue and may be delayed, but Set CIG Parameters is via
hci_send_cmd.

Make the ordering well-defined by sending also Set CIG Parameters via
hci_sync.

Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: hci_bcm: do not mark valid bd_addr as invalid

A recent commit restored the original (and still documented) semantics
for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address
is considered invalid unless an address is provided by firmware.

This specifically means that this flag must only be set for devices with
invalid addresses, but the Broadcom driver has so far been setting this
flag unconditionally.

Fortunately the driver already checks for invalid addresses during setup
and sets the HCI_QUIRK_INVALID_BDADDR flag. Use this flag to indicate
when the address can be overridden by firmware (long term, this should
probably just always be allowed).

Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/lkml/ecef83c8-497f-4011-607b-a63c24764867@samsung.com
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_ready_cb

l2cap_sock_release(sk) frees sk. However, sk's children are still alive
and point to the already free'd sk's address.
To fix this, l2cap_sock_release(sk) also cleans sk's children.

==================================================================
BUG: KASAN: use-after-free in l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
Read of size 8 at addr ffff888104617aa8 by task kworker/u3:0/276

CPU: 0 PID: 276 Comm: kworker/u3:0 Not tainted 6.2.0-00001-gef397bd4d5fb-dirty #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci2 hci_rx_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x72/0x95 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:306 [inline]
print_report+0x175/0x478 mm/kasan/report.c:417
kasan_report+0xb1/0x130 mm/kasan/report.c:517
l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
l2cap_chan_ready+0x10e/0x1e0 net/bluetooth/l2cap_core.c:1386
l2cap_config_req+0x753/0x9f0 net/bluetooth/l2cap_core.c:4480
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5739 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:6509 [inline]
l2cap_recv_frame+0xe2e/0x43c0 net/bluetooth/l2cap_core.c:7788
l2cap_recv_acldata+0x6ed/0x7e0 net/bluetooth/l2cap_core.c:8506
hci_acldata_packet net/bluetooth/hci_core.c:3813 [inline]
hci_rx_work+0x66e/0xbc0 net/bluetooth/hci_core.c:4048
process_one_work+0x4ea/0x8e0 kernel/workqueue.c:2289
worker_thread+0x364/0x8e0 kernel/workqueue.c:2436
kthread+0x1b9/0x200 kernel/kthread.c:376
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>

Allocated by task 288:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:374 [inline]
__kasan_kmalloc+0x82/0x90 mm/kasan/common.c:383
kasan_kmalloc include/linux/kasan.h:211 [inline]
__do_kmalloc_node mm/slab_common.c:968 [inline]
__kmalloc+0x5a/0x140 mm/slab_common.c:981
kmalloc include/linux/slab.h:584 [inline]
sk_prot_alloc+0x113/0x1f0 net/core/sock.c:2040
sk_alloc+0x36/0x3c0 net/core/sock.c:2093
l2cap_sock_alloc.constprop.0+0x39/0x1c0 net/bluetooth/l2cap_sock.c:1852
l2cap_sock_create+0x10d/0x220 net/bluetooth/l2cap_sock.c:1898
bt_sock_create+0x183/0x290 net/bluetooth/af_bluetooth.c:132
__sock_create+0x226/0x380 net/socket.c:1518
sock_create net/socket.c:1569 [inline]
__sys_socket_create net/socket.c:1606 [inline]
__sys_socket_create net/socket.c:1591 [inline]
__sys_socket+0x112/0x200 net/socket.c:1639
__do_sys_socket net/socket.c:1652 [inline]
__se_sys_socket net/socket.c:1650 [inline]
__x64_sys_socket+0x40/0x50 net/socket.c:1650
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 288:
kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:523
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free mm/kasan/common.c:200 [inline]
__kasan_slab_free+0x10a/0x190 mm/kasan/common.c:244
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1781 [inline]
slab_free_freelist_hook mm/slub.c:1807 [inline]
slab_free mm/slub.c:3787 [inline]
__kmem_cache_free+0x88/0x1f0 mm/slub.c:3800
sk_prot_free net/core/sock.c:2076 [inline]
__sk_destruct+0x347/0x430 net/core/sock.c:2168
sk_destruct+0x9c/0xb0 net/core/sock.c:2183
__sk_free+0x82/0x220 net/core/sock.c:2194
sk_free+0x7c/0xa0 net/core/sock.c:2205
sock_put include/net/sock.h:1991 [inline]
l2cap_sock_kill+0x256/0x2b0 net/bluetooth/l2cap_sock.c:1257
l2cap_sock_release+0x1a7/0x220 net/bluetooth/l2cap_sock.c:1428
__sock_release+0x80/0x150 net/socket.c:650
sock_close+0x19/0x30 net/socket.c:1368
__fput+0x17a/0x5c0 fs/file_table.c:320
task_work_run+0x132/0x1c0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x21/0x50 kernel/entry/common.c:296
do_syscall_64+0x4c/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc

The buggy address belongs to the object at ffff888104617800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 680 bytes inside of
1024-byte region [ffff888104617800, ffff888104617c00)

The buggy address belongs to the physical page:
page:00000000dbca6a80 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888104614000 pfn:0x104614
head:00000000dbca6a80 order:2 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffff888100041dc0 ffffea0004212c10 ffffea0004234b10
raw: ffff888104614000 0000000000080002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff888104617980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888104617a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888104617a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888104617b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888104617b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Ack: This bug is found by FuzzBT with a modified Syzkaller. Other
contributors are Ruoyu Wu and Hui Peng.
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: fix use-bdaddr-property quirk

Devices that lack persistent storage for the device address can indicate
this by setting the HCI_QUIRK_INVALID_BDADDR which causes the controller
to be marked as unconfigured until user space has set a valid address.

The related HCI_QUIRK_USE_BDADDR_PROPERTY was later added to similarly
indicate that the device lacks a valid address but that one may be
specified in the devicetree.

As is clear from commit 7a0e5b15ca45 ("Bluetooth: Add quirk for reading
BD_ADDR from fwnode property") that added and documented this quirk and
commits like de79a9df1692 ("Bluetooth: btqcomsmd: use
HCI_QUIRK_USE_BDADDR_PROPERTY"), the device address of controllers with
this flag should be treated as invalid until user space has had a chance
to configure the controller in case the devicetree property is missing.

As it does not make sense to allow controllers with invalid addresses,
restore the original semantics, which also makes sure that the
implementation is consistent (e.g. get_missing_options() indicates that
the address must be set) and matches the documentation (including
comments in the code, such as, "In case any of them is set, the
controller has to start up as unconfigured.").

Fixes: e668eb1e1578 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: fix invalid-bdaddr quirk for non-persistent setup

Devices that lack persistent storage for the device address can indicate
this by setting the HCI_QUIRK_INVALID_BDADDR which causes the controller
to be marked as unconfigured until user space has set a valid address.

Once configured, the device address must be set on every setup for
controllers with HCI_QUIRK_NON_PERSISTENT_SETUP to avoid marking the
controller as unconfigured and requiring the address to be set again.

Fixes: 740011cfe948 ("Bluetooth: Add new quirk for non-persistent setup settings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: L2CAP: Fix use-after-free

Fix potential use-after-free in l2cap_le_command_rej.

Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: btqca: use le32_to_cpu for ver.soc_id

Use le32_to_cpu for ver.soc_id to fix the following
sparse warning.

drivers/bluetooth/btqca.c:640:24: sparse: warning: restricted
__le32 degrades to integer

Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: btusb: Add device 6655:8771 to device tables

This device is an Inspire branded BT 5.1 USB dongle with a
Realtek RTL8761BU chip using the "Best Buy China" vendor ID.

The device table is as follows:

T:  Bus=01 Lev=01 Prnt=02 Port=09 Cnt=01 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=6655 ProdID=8771 Rev=02.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00E04C239987
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms

Signed-off-by: Dan Gora <dan.gora@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Bluetooth: btrtl: Add missing MODULE_FIRMWARE declarations

Add missing MODULE_FIRMWARE declarations for firmware referenced in
btrtl.c.

Signed-off-by: Dan Gora <dan.gora@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add MODULE_FIRMWARE() for FIRMWARE_TG357766.

Fixes a bug where on the M1 mac mini initramfs-tools fails to
include the necessary firmware into the initrd.

Fixes: c4dab50697ff ("tg3: Download 57766 EEE service patch firmware")
Signed-off-by: Tobias Heider <me@tobhe.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/ZJt7LKzjdz8+dClx@tobhe.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'fix-ptp-received-on-wrong-port-with-bridged-sja1105-dsa'

Vladimir Oltean says:

====================
Fix PTP received on wrong port with bridged SJA1105 DSA

Since the changes were made to tag_8021q to support imprecise RX for
bridged ports, the tag_sja1105 driver still prefers the source port
information deduced from the VLAN headers for link-local traffic, even
though the switch can theoretically do better and report the precise
source port.

The problem is that the tagger doesn't know when to trust one source of
information over another, because the INCL_SRCPT option (to "tag" link
local frames) is sometimes enabled and sometimes it isn't.

The first patch makes the switch provide the hardware tag for link local
traffic under all circumstances, and the second patch makes the tagger
always use that hardware tag as primary source of information for link
local packets.
====================

Link: https://lore.kernel.org/r/20230627094207.3385231-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT

Currently the sja1105 tagging protocol prefers using the source port
information from the VLAN header if that is available, falling back to
the INCL_SRCPT option if it isn't. The VLAN header is available for all
frames except for META frames initiated by the switch (containing RX
timestamps), and thus, the "if (is_link_local)" branch is practically
dead.

The tag_8021q source port identification has become more loose
("imprecise") and will report a plausible rather than exact bridge port,
when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local
traffic always needs to know the precise source port. With incorrect
source port reporting, for example PTP traffic over 2 bridged ports will
all be seen on sockets opened on the first such port, which is incorrect.

Now that the tagging protocol has been changed to make link-local frames
always contain source port information, we can reverse the order of the
checks so that we always give precedence to that information (which is
always precise) in lieu of the tag_8021q VID which is only precise for a
standalone port.

Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID")
Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: sja1105: always enable the INCL_SRCPT option

Link-local traffic on bridged SJA1105 ports is sometimes tagged by the
hardware with source port information (when the port is under a VLAN
aware bridge).

The tag_8021q source port identification has become more loose
("imprecise") and will report a plausible rather than exact bridge port,
when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local
traffic always needs to know the precise source port.

Modify the driver logic (and therefore: the tagging protocol itself) to
always include the source port information with link-local packets,
regardless of whether the port is standalone, under a VLAN-aware or
VLAN-unaware bridge. This makes it possible for the tagging driver to
give priority to that information over the tag_8021q VLAN header.

The big drawback with INCL_SRCPT is that it makes it impossible to
distinguish between an original MAC DA of 01:80:C2:XX:YY:ZZ and
01:80:C2:AA:BB:ZZ, because the tagger just patches MAC DA bytes 3 and 4
with zeroes. Only if PTP RX timestamping is enabled, the switch will
generate a META follow-up frame containing the RX timestamp and the
original bytes 3 and 4 of the MAC DA. Those will be used to patch up the
original packet. Nonetheless, in the absence of PTP RX timestamping, we
have to live with this limitation, since it is more important to have
the more precise source port information for link-local traffic.

Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID")
Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'fix-ptp-packet-drops-with-ocelot-8021q-dsa-tag-protocol'

Vladimir Oltean says:

====================
Fix PTP packet drops with ocelot-8021q DSA tag protocol

Changes in v2:
- Distinguish between L2 and L4 PTP packets
v1 at:
https://lore.kernel.org/netdev/20230626154003.3153076-1-vladimir.oltean@nxp.com/

Patch 3/3 fixes an issue with the ocelot/felix driver, where it would
drop PTP traffic on RX unless hardware timestamping for that packet type
was enabled.

Fixing that requires the driver to know whether it had previously
configured the hardware to timestamp PTP packets on that port. But it
cannot correctly determine that today using the existing code structure,
so patches 1/3 and 2/3 fix the control path of the code such that
ocelot->ports[port]->trap_proto faithfully reflects whether that
configuration took place.
====================

Link: https://lore.kernel.org/r/20230627163114.3561597-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: felix: don't drop PTP frames with tag_8021q when RX timestamping is disabled

The driver implements a workaround for the fact that it doesn't have an
IRQ source to tell it whether PTP frames are available through the
extraction registers, for those frames to be processed and passed
towards the network stack. That workaround is to configure the switch,
through felix_hwtstamp_set() -> felix_update_trapping_destinations(),
to create two copies of PTP packets: one sent over Ethernet to the DSA
master, and one to be consumed through the aforementioned CPU extraction
queue registers.

The reason why we want PTP packets to be consumed through the CPU
extraction registers in the first place is because we want to see their
hardware RX timestamp. With tag_8021q, that is only visible that way,
and it isn't visible with the copy of the packet that's transmitted over
Ethernet.

The problem with the workaround implementation is that it drops the
packet received over Ethernet, in expectation of its copy being present
in the CPU extraction registers. However, if felix_hwtstamp_set() hasn't
run (aka PTP RX timestamping is disabled), the driver will drop the
original PTP frame and there will be no copy of it in the CPU extraction
registers. So, the network stack will simply not see any PTP frame.

Look at the port's trapping configuration to see whether the driver has
previously enabled the CPU extraction registers. If it hasn't, just
don't RX timestamp the frame and let it be passed up the stack by DSA,
which is perfectly fine.

Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: mscc: ocelot: don't keep PTP configuration of all ports in single structure

In a future change, the driver will need to determine whether PTP RX
timestamping is enabled on a port (including whether traps were set up
on that port in particular) and that is currently not possible.

The driver supports different RX filters (L2, L4) and kinds of TX
timestamping (one-step, two-step) on its ports, but it saves all
configuration in a single struct hwtstamp_config that is global to the
switch. So, the latest timestamping configuration on one port
(including a request to disable timestamping) affects what gets reported
for all ports, even though the configuration itself is still individual
to each port.

The port timestamping configurations are only coupled because of the
common structure, so replace the hwtstamp_config with a mask of trapped
protocols saved per port. We also have the ptp_cmd to distinguish
between one-step and two-step PTP timestamping, so with those 2 bits of
information we can fully reconstruct a descriptive struct
hwtstamp_config for each port, during the SIOCGHWTSTAMP ioctl.

Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: mscc: ocelot: don't report that RX timestamping is enabled by default

PTP RX timestamping should be enabled when the user requests it, not by
default. If it is enabled by default, it can be problematic when the
ocelot driver is a DSA master, and it sidesteps what DSA tries to avoid
through __dsa_master_hwtstamp_validate().

Additionally, after the change which made ocelot trap PTP packets only
to the CPU at ocelot_hwtstamp_set() time, it is no longer even true that
RX timestamping is enabled by default, because until ocelot_hwtstamp_set()
is called, the PTP traps are actually not set up. So the rx_filter field
of ocelot->hwtstamp_config reflects an incorrect reality.

Fixes: 96ca08c05838 ("net: mscc: ocelot: set up traps for PTP packets")
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge branch 'net-sched-act_ipt-bug-fixes'

Florian Westphal says:

====================
net/sched: act_ipt bug fixes

v3: prefer skb_header() helper in patch 2. No other changes.
I've retained Acks and RvB-Tags of v2.

While checking if netfilter could be updated to replace selected
instances of NF_DROP with kfree_skb_reason+NF_STOLEN to improve
debugging info via drop monitor I found that act_ipt is incompatible
with such an approach. Moreover, it lacks multiple sanity checks
to avoid certain code paths that make assumptions that the tc layer
doesn't meet, such as header sanity checks, availability of skb_dst,
skb_nfct() and so on.

act_ipt test in the tc selftest still pass with this applied.

I think that we should consider removal of this module, while
this should take care of all problems, its ipv4 only and I don't
think there are any netfilter targets that lack a native tc
equivalent, even when ignoring bpf.
====================

Link: https://lore.kernel.org/r/20230627123813.3036-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: act_ipt: zero skb->cb before calling target

xtables relies on skb being owned by ip stack, i.e. with ipv4
check in place skb->cb is supposed to be IPCB.

I don't see an immediate problem (REJECT target cannot be used anymore
now that PRE/POSTROUTING hook validation has been fixed), but better be
safe than sorry.

A much better patch would be to either mark act_ipt as
"depends on BROKEN" or remove it altogether. I plan to do this
for -next in the near future.

This tc extension is broken in the sense that tc lacks an
equivalent of NF_STOLEN verdict.

With NF_STOLEN, target function takes complete ownership of skb, caller
cannot dereference it anymore.

ACT_STOLEN cannot be used for this: it has a different meaning, caller
is allowed to dereference the skb.

At this time NF_STOLEN won't be returned by any targets as far as I can
see, but this may change in the future.

It might be possible to work around this via list of allowed
target extensions known to only return DROP or ACCEPT verdicts, but this
is error prone/fragile.

Existing selftest only validates xt_LOG and act_ipt is restricted
to ipv4 so I don't think this action is used widely.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: act_ipt: add sanity checks on skb before calling target

Netfilter targets make assumptions on the skb state, for example
iphdr is supposed to be in the linear area.

This is normally done by IP stack, but in act_ipt case no
such checks are made.

Some targets can even assume that skb_dst will be valid.
Make a minimum effort to check for this:

- Don't call the targets eval function for non-ipv4 skbs.
- Don't call the targets eval function for POSTROUTING
emulation when the skb has no dst set.

v3: use skb_protocol helper (Davide Caratti)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net/sched: act_ipt: add sanity checks on table name and hook locations

Looks like "tc" hard-codes "mangle" as the only supported table
name, but on kernel side there are no checks.

This is wrong. Not all xtables targets are safe to call from tc.
E.g. "nat" targets assume skb has a conntrack object assigned to it.
Normally those get called from netfilter nat core which consults the
nat table to obtain the address mapping.

"tc" userspace either sets PRE or POSTROUTING as hook number, but there
is no validation of this on kernel side, so update netlink policy to
reject bogus numbers. Some targets may assume skb_dst is set for
input/forward hooks, so prevent those from being used.

act_ipt uses the hook number in two places:
1. the state hook number, this is fine as-is
2. to set par.hook_mask

The latter is a bit mask, so update the assignment to make
xt_check_target() to the right thing.

Followup patch adds required checks for the skb/packet headers before
calling the targets evaluation function.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

sctp: fix potential deadlock on &net->sctp.addr_wq_lock

As &net->sctp.addr_wq_lock is also acquired by the timer
sctp_addr_wq_timeout_handler() in protocal.c, the same lock acquisition
at sctp_auto_asconf_init() seems should disable irq since it is called
from sctp_accept() under process context.

Possible deadlock scenario:
sctp_accept()
    -> sctp_sock_migrate()
    -> sctp_auto_asconf_init()
    -> spin_lock(&net->sctp.addr_wq_lock)
        <timer interrupt>
        -> sctp_addr_wq_timeout_handler()
        -> spin_lock_bh(&net->sctp.addr_wq_lock); (deadlock here)

This flaw was found using an experimental static analysis tool we are
developing for irq-related deadlock.

The tentative patch fix the potential deadlock by spin_lock_bh().

Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Fixes: 34e5b0118685 ("sctp: delay auto_asconf init until binding the first addr")
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230627120340.19432-1-dg573847474@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: lan743x: Don't sleep in atomic context

dev_set_rx_mode() grabs a spin_lock, and the lan743x implementation
proceeds subsequently to go to sleep using readx_poll_timeout().

Introduce a helper wrapping the readx_poll_timeout_atomic() function
and use it to replace the calls to readx_polL_timeout().

Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Cc: stable@vger.kernel.org
Cc: Bryan Whitehead <bryan.whitehead@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230627035000.1295254-1-moritzf@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'net-next-6.5' of git://git./linux/kernel/git/netdev/net-next

Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
  release. The latter will definitely require fixes but I think that we
  got it to a reasonable point.

  Core:

   - Rework the sendpage & splice implementations

     Instead of feeding data into sockets page by page extend sendmsg
     handlers to support taking a reference on the data, controlled by a
     new flag called MSG_SPLICE_PAGES

     Rework the handling of unexpected-end-of-file to invoke an
     additional callback instead of trying to predict what the right
     combination of MORE/NOTLAST flags is

     Remove the MSG_SENDPAGE_NOTLAST flag completely

   - Implement SCM_PIDFD, a new type of CMSG type analogous to
     SCM_CREDENTIALS, but it contains pidfd instead of plain pid

   - Enable socket busy polling with CONFIG_RT

   - Improve reliability and efficiency of reporting for ref_tracker

   - Auto-generate a user space C library for various Netlink families

  Protocols:

   - Allow TCP to shrink the advertised window when necessary, prevent
     sk_rcvbuf auto-tuning from growing the window all the way up to
     tcp_rmem[2]

   - Use per-VMA locking for "page-flipping" TCP receive zerocopy

   - Prepare TCP for device-to-device data transfers, by making sure
     that payloads are always attached to skbs as page frags

   - Make the backoff time for the first N TCP SYN retransmissions
     linear. Exponential backoff is unnecessarily conservative

   - Create a new MPTCP getsockopt to retrieve all info
     (MPTCP_FULL_INFO)

   - Avoid waking up applications using TLS sockets until we have a full
     record

   - Allow using kernel memory for protocol ioctl callbacks, paving the
     way to issuing ioctls over io_uring

   - Add nolocalbypass option to VxLAN, forcing packets to be fully
     encapsulated even if they are destined for a local IP address

   - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
     in-kernel ECMP implementation (e.g. Open vSwitch) select the same
     link for all packets. Support L4 symmetric hashing in Open vSwitch

   - PPPoE: make number of hash bits configurable

   - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
     (ipconfig)

   - Add layer 2 miss indication and filtering, allowing higher layers
     (e.g. ACL filters) to make forwarding decisions based on whether
     packet matched forwarding state in lower devices (bridge)

   - Support matching on Connectivity Fault Management (CFM) packets

   - Hide the "link becomes ready" IPv6 messages by demoting their
     printk level to debug

   - HSR: don't enable promiscuous mode if device offloads the proto

   - Support active scanning in IEEE 802.15.4

   - Continue work on Multi-Link Operation for WiFi 7

  BPF:

   - Add precision propagation for subprogs and callbacks. This allows
     maintaining verification efficiency when subprograms are used, or
     in fact passing the verifier at all for complex programs,
     especially those using open-coded iterators

   - Improve BPF's {g,s}setsockopt() length handling. Previously BPF
     assumed the length is always equal to the amount of written data.
     But some protos allow passing a NULL buffer to discover what the
     output buffer *should* be, without writing anything

   - Accept dynptr memory as memory arguments passed to helpers

   - Add routing table ID to bpf_fib_lookup BPF helper

   - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

   - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
     maps as read-only)

   - Show target_{obj,btf}_id in tracing link fdinfo

   - Addition of several new kfuncs (most of the names are
     self-explanatory):
      - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
        bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
        and bpf_dynptr_clone().
      - bpf_task_under_cgroup()
      - bpf_sock_destroy() - force closing sockets
      - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

  Netfilter:

   - Relax set/map validation checks in nf_tables. Allow checking
     presence of an entry in a map without using the value

   - Increase ip_vs_conn_tab_bits range for 64BIT builds

   - Allow updating size of a set

   - Improve NAT tuple selection when connection is closing

  Driver API:

   - Integrate netdev with LED subsystem, to allow configuring HW
     "offloaded" blinking of LEDs based on link state and activity
     (i.e. packets coming in and out)

   - Support configuring rate selection pins of SFP modules

   - Factor Clause 73 auto-negotiation code out of the drivers, provide
     common helper routines

   - Add more fool-proof helpers for managing lifetime of MDIO devices
     associated with the PCS layer

   - Allow drivers to report advanced statistics related to Time Aware
     scheduler offload (taprio)

   - Allow opting out of VF statistics in link dump, to allow more VFs
     to fit into the message

   - Split devlink instance and devlink port operations

  New hardware / drivers:

   - Ethernet:
      - Synopsys EMAC4 IP support (stmmac)
      - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
      - Marvell 88E6250 7 port switches
      - Microchip LAN8650/1 Rev.B0 PHYs
      - MediaTek MT7981/MT7988 built-in 1GE PHY driver

   - WiFi:
      - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
      - Realtek RTL8723DS (SDIO variant)
      - Realtek RTL8851BE

   - CAN:
      - Fintek F81604

  Drivers:

   - Ethernet NICs:
      - Intel (100G, ice):
         - support dynamic interrupt allocation
         - use meta data match instead of VF MAC addr on slow-path
      - nVidia/Mellanox:
         - extend link aggregation to handle 4, rather than just 2 ports
         - spawn sub-functions without any features by default
      - OcteonTX2:
         - support HTB (Tx scheduling/QoS) offload
         - make RSS hash generation configurable
         - support selecting Rx queue using TC filters
      - Wangxun (ngbe/txgbe):
         - add basic Tx/Rx packet offloads
         - add phylink support (SFP/PCS control)
      - Freescale/NXP (enetc):
         - report TAPRIO packet statistics
      - Solarflare/AMD:
         - support matching on IP ToS and UDP source port of outer
           header
         - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
         - add devlink dev info support for EF10

   - Virtual NICs:
      - Microsoft vNIC:
         - size the Rx indirection table based on requested
           configuration
         - support VLAN tagging
      - Amazon vNIC:
         - try to reuse Rx buffers if not fully consumed, useful for ARM
           servers running with 16kB pages
      - Google vNIC:
         - support TCP segmentation of >64kB frames

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - enable USXGMII (88E6191X)
      - Microchip:
         - lan966x: add support for Egress Stage 0 ACL engine
         - lan966x: support mapping packet priority to internal switch
           priority (based on PCP or DSCP)

   - Ethernet PHYs:
      - Broadcom PHYs:
         - support for Wake-on-LAN for BCM54210E/B50212E
         - report LPI counter
      - Microsemi PHYs: support RGMII delay configuration (VSC85xx)
      - Micrel PHYs: receive timestamp in the frame (LAN8841)
      - Realtek PHYs: support optional external PHY clock
      - Altera TSE PCS: merge the driver into Lynx PCS which it is a
        variant of

   - CAN: Kvaser PCIEcan:
      - support packet timestamping

   - WiFi:
      - Intel (iwlwifi):
         - major update for new firmware and Multi-Link Operation (MLO)
         - configuration rework to drop test devices and split the
           different families
         - support for segmented PNVM images and power tables
         - new vendor entries for PPAG (platform antenna gain) feature
      - Qualcomm 802.11ax (ath11k):
         - Multiple Basic Service Set Identifier (MBSSID) and Enhanced
           MBSSID Advertisement (EMA) support in AP mode
         - support factory test mode
      - RealTek (rtw89):
         - add RSSI based antenna diversity
         - support U-NII-4 channels on 5 GHz band
      - RealTek (rtl8xxxu):
         - AP mode support for 8188f
         - support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
  net: scm: introduce and use scm_recv_unix helper
  af_unix: Skip SCM_PIDFD if scm->pid is NULL.
  net: lan743x: Simplify comparison
  netlink: Add __sock_i_ino() for __netlink_diag_dump().
  net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
  Revert "af_unix: Call scm_recv() only after scm_set_cred()."
  phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
  libceph: Partially revert changes to support MSG_SPLICE_PAGES
  net: phy: mscc: fix packet loss due to RGMII delays
  net: mana: use vmalloc_array and vcalloc
  net: enetc: use vmalloc_array and vcalloc
  ionic: use vmalloc_array and vcalloc
  pds_core: use vmalloc_array and vcalloc
  gve: use vmalloc_array and vcalloc
  octeon_ep: use vmalloc_array and vcalloc
  net: usb: qmi_wwan: add u-blox 0x1312 composition
  perf trace: fix MSG_SPLICE_PAGES build error
  ipvlan: Fix return value of ipvlan_queue_xmit()
  netfilter: nf_tables: fix underflow in chain reference counter
  netfilter: nf_tables: unbind non-anonymous set if rule construction fails
  ...

Merge tag 'v6.5-rc1-sysctl-next' of git://git./linux/kernel/git/mcgrof/linux

Pull sysctl updates from Luis Chamberlain:
"The changes for sysctl are in line with prior efforts to stop usage of
  deprecated routines which incur recursion and also make it hard to
  remove the empty array element in each sysctl array declaration.

  The most difficult user to modify was parport which required a bit of
  re-thinking of how to declare shared sysctls there, Joel Granados has
  stepped up to the plate to do most of this work and eventual removal
  of register_sysctl_table(). That work ended up saving us about 1465
  bytes according to bloat-o-meter. Since we gained a few bloat-o-meter
  karma points I moved two rather small sysctl arrays from
  kernel/sysctl.c leaving us only two more sysctl arrays to move left.

  Most changes have been tested on linux-next for about a month. The
  last straggler patches are a minor parport fix, changes to the sysctl
  kernel selftest so to verify correctness and prevent regressions for
  the future change he made to provide an alternative solution for the
  special sysctl mount point target which was using the now deprecated
  sysctl child element.

  This is all prep work to now finally be able to remove the empty array
  element in all sysctl declarations / registrations which is expected
  to save us a bit of bytes all over the kernel. That work will be
  tested early after v6.5-rc1 is out"

* tag 'v6.5-rc1-sysctl-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: replace child with an enumeration
  sysctl: Remove debugging dump_stack
  test_sysclt: Test for registering a mount point
  test_sysctl: Add an option to prevent test skip
  test_sysctl: Add an unregister sysctl test
  test_sysctl: Group node sysctl test under one func
  test_sysctl: Fix test metadata getters
  parport: plug a sysctl register leak
  sysctl: move security keys sysctl registration to its own file
  sysctl: move umh sysctl registration to its own file
  signal: move show_unhandled_signals sysctl to its own file
  sysctl: remove empty dev table
  sysctl: Remove register_sysctl_table
  sysctl: Refactor base paths registrations
  sysctl: stop exporting register_sysctl_table
  parport: Removed sysctl related defines
  parport: Remove register_sysctl_table from parport_default_proc_register
  parport: Remove register_sysctl_table from parport_device_proc_register
  parport: Remove register_sysctl_table from parport_proc_register
  parport: Move magic number "15" to a define

Merge tag 'v6.5-rc1-modules-next' of git://git./linux/kernel/git/mcgrof/linux

Pull module updates from Luis Chamberlain:
"The changes queued up for modules are pretty tame, mostly code removal
  of moving of code.

  Only two minor functional changes are made, the only one which stands
  out is Sebastian Andrzej Siewior's simplification of module reference
  counting by removing preempt_disable() and that has been tested on
  linux-next for well over a month without no regressions.

  I'm now, I guess, also a kitchen sink for some kallsyms changes"

[ There was a mis-communication about the concurrent module load changes
  that I had expected to come through Luis despite me authoring the
  patch. So some of the module updates were left hanging in the email
  ether, and I just committed them separately.

  It's my bad - I should have made it more clear that I expected my
  own patches to come through the module tree too. Now they missed
  linux-next, but hopefully that won't cause any issues    - Linus ]

* tag 'v6.5-rc1-modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  kallsyms: make kallsyms_show_value() as generic function
  kallsyms: move kallsyms_show_value() out of kallsyms.c
  kallsyms: remove unsed API lookup_symbol_attrs
  kallsyms: remove unused arch_get_kallsym() helper
  module: Remove preempt_disable() from module reference counting.

modules: catch concurrent module loads, treat them as idempotent

This is the new-and-improved attempt at avoiding huge memory load spikes
when the user space boot sequence tries to load hundreds (or even
thousands) of redundant duplicate modules in parallel.

See commit 9828ed3f695a ("module: error out early on concurrent load of
the same module file") for background and an earlier failed attempt that
was reverted.

That earlier attempt just said "concurrently loading the same module is
silly, just open the module file exclusively and return -ETXTBSY if
somebody else is already loading it".

While it is true that concurrent module loads of the same module is
silly, the reason that earlier attempt then failed was that the
concurrently loaded module would often be a prerequisite for another
module.

Thus failing to load the prerequisite would then cause cascading
failures of the other modules, rather than just short-circuiting that
one unnecessary module load.

At the same time, we still really don't want to load the contents of the
same module file hundreds of times, only to then wait for an eventually
successful load, and have everybody else return -EEXIST.

As a result, this takes another approach, and treats concurrent module
loads from the same file as "idempotent" in the inode.  So if one module
load is ongoing, we don't start a new one, but instead just wait for the
first one to complete and return the same return value as it did.

So unlike the first attempt, this does not return early: the intent is
not to speed up the boot, but to avoid a thundering herd problem in
allocating memory (both physical and virtual) for a module more than
once.

Also note that this does change behavior: it used to be that when you
had concurrent loads, you'd have one "winner" that would return success,
and everybody else would return -EEXIST.

In contrast, this idempotent logic goes all Oprah on the problem, and
says "You are a winner! And you are a winner! We are ALL winners".  But
since there's no possible actual real semantic difference between "you
loaded the module" and "somebody else already loaded the module", this
is more of a feel-good change than an actual honest-to-goodness semantic
change.

Of course, any true Johnny-come-latelies that don't get caught in the
concurrency filter will still return -EEXIST.  It's no different from
not even getting a seat at an Oprah taping.  That's life.

See the long thread on the kernel mailing list about this all, which
includes some numbers for memory use before and after the patch.

Link: https://lore.kernel.org/lkml/20230524213620.3509138-1-mcgrof@kernel.org/
Reviewed-by: Johan Hovold <johan@kernel.org>
Tested-by: Johan Hovold <johan@kernel.org>
Tested-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum..com>
Tested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

module: split up 'finit_module()' into init_module_from_file() helper

This will simplify the next step, where we can then key off the inode to
do one idempotent module load.

Let's do the obvious re-organization in one step, and then the new code
in another.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mmc-v6.5' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
"MMC core:
   - Allow synchronous detection of (e)MMC/SD/SDIO cards
   - Fixup error check for ioctls for SPI hosts
   - Disable broken SD-Cache support for Kingston Canvas Go Plus from 2019
   - Disable broken eMMC-Trim support for Kingston EMMC04G-M627
   - Disable broken eMMC-Trim support for Micron MTFC4GACAJCN-1M

  MMC host:
   - bcm2835: Convert DT bindings to YAML
   - mmci:
      - Enable asynchronous probe
      - Transform the ux500 HW-busy detection into a proper state machine
      - Add support for SW busy-end timeouts for the ux500 variants
   - mmci_stm32:
      - Add support for sdm32 variant revision v3.0 used on STM32MP25
      - Improve the tuning sequence
   - mtk-sd: Tune polling-period to improve performance
   - sdhci: Fixup DMA configuration for 64-bit DMA mode
   - sdhci-bcm-kona: Convert DT bindings to YAML
   - sdhci-msm:
      - Switch to use the new ICE API
      - Add support for the SC8280XP/IPQ6018/QDU1000/QRU1000 variants
   - sdhci-pci-gli:
      - Add support SD Express cards for GL9767
      - Add support for the Genesys Logic GL9767 variant"

* tag 'mmc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (42 commits)
  dt-bindings: mmc: fsl-imx-esdhc: Add imx6ul support
  mmc: mmci: Add support for SW busy-end timeouts
  mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019
  mmc: core: disable TRIM on Kingston EMMC04G-M627
  mmc: mmci: stm32: add delay block support for STM32MP25
  mmc: mmci: stm32: prepare other delay block support
  mmc: mmci: stm32: manage block gap hardware flow control
  mmc: mmci: Add support for sdmmc variant revision v3.0
  mmc: mmci: add stm32_idmabsize_align parameter
  dt-bindings: mmc: mmci: Add st,stm32mp25-sdmmc2 compatible
  mmc: core: disable TRIM on Micron MTFC4GACAJCN-1M
  mmc: mmci: Break out a helper function
  mmc: mmci: Use a switch statement machine
  mmc: mmci: Use state machine state as exit condition
  mmc: mmci: Retry the busy start condition
  mmc: mmci: Make busy complete state machine explicit
  mmc: mmci: Break out error check in busy detect
  mmc: mmci: Stash status while waiting for busy
  mmc: mmci: Unwind big if() clause
  mmc: mmci: Clear busy_status when starting command
  ...

Merge tag 'mtd/for-6.5' of git://git./linux/kernel/git/mtd/linux

Pull mtd updates from
"Core MTD changes:
   - otp:
      - Put factory OTP/NVRAM into the entropy pool
      - Clean up on error in mtd_otp_nvmem_add()

  MTD devices changes:
   - sm_ftl: Fix typos in comments
   - Use SPDX license headers
   - pismo: Switch back to use i2c_driver's .probe()
   - mtdpart: Drop useless LIST_HEAD
   - st_spi_fsm: Use the devm_clk_get_enabled() helper function

  DT binding changes:
   - partitions:
      - Include TP-Link SafeLoader in allowed list
      - Add missing type for "linux,rootfs"
   - Extend the nand node names filter
   - Create a file for raw NAND chip properties
   - Mark nand-ecc-placement deprecated
   - Describe nand-ecc-mode
   - Prevent NAND chip unevaluated properties in all NAND bindings with
     a NAND chip reference.
   - Qcom: Fix a property position
   - Marvell: Convert to YAML DT schema

  Raw NAND chip drivers changes:
   - Macronix: OTP access for MX30LFxG18AC
   - Add basic Sandisk manufacturer ops
   - Add support for Sandisk SDTNQGAMA

  Raw NAND controller driver changes:
   - Meson:
      - Replace integer consts with proper defines
      - Allow waiting w/o wired ready/busy pin
      - Check buffer length validity
      - Fix unaligned DMA buffers handling
      - dt-bindings: Fix 'nand-rb' property
   - Arasan: Revert "mtd: rawnand: arasan: Prevent an unsupported
     configuration" as this limitation is no longer true thanks to the
     recent efforts in improving the clocks support in this driver

  SPI-NAND changes:
   - Gigadevice: add support for GD5F2GQ5xExxH
   - Macronix: Add support for serial NAND flashes"

* tag 'mtd/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (38 commits)
  dt-bindings: mtd: marvell-nand: Convert to YAML DT scheme
  dt-bindings: mtd: ti,am654: Prevent unevaluated properties
  dt-bindings: mtd: mediatek: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: mediatek: Reference raw-nand-chip.yaml
  dt-bindings: mtd: stm32: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: rockchip: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: intel: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: denali: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: brcmnand: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: meson: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: sunxi: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: ingenic: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: qcom: Prevent NAND chip unevaluated properties
  dt-bindings: mtd: qcom: Fix a property position
  dt-bindings: mtd: Describe nand-ecc-mode
  dt-bindings: mtd: Mark nand-ecc-placement deprecated
  dt-bindings: mtd: Create a file for raw NAND chip properties
  dt-bindings: mtd: Accept nand related node names
  mtd: sm_ftl: Fix typos in comments
  mtd: otp: clean up on error in mtd_otp_nvmem_add()
  ...

Merge tag 'spi-v6.5' of git://git./linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
"One small core feature this time around but mostly driver improvements
  and additions for SPI:

   - Add support for controlling the idle state of MOSI, some systems
     can support this and depending on the system integration may need
     it to avoid glitching in some situations

   - Support for polling mode in the S3C64xx driver and DMA on the
     Qualcomm QSPI driver

   - Support for several Allwinner SoCs, AMD Pensando Elba, Intel Mount
     Evans, Renesas RZ/V2M, and ST STM32H7"

* tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
  spi: dt-bindings: atmel,at91rm9200-spi: fix broken sam9x7 compatible
  spi: dt-bindings: atmel,at91rm9200-spi: add sam9x7 compatible
  spi: Add support for Renesas CSI
  spi: dt-bindings: Add bindings for RZ/V2M CSI
  spi: sun6i: Use the new helper to derive the xfer timeout value
  spi: atmel: Prevent false timeouts on long transfers
  spi: dt-bindings: stm32: do not disable spi-slave property for stm32f4-f7
  spi: Create a helper to derive adaptive timeouts
  spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
  spi: stm32: disable spi-slave property for stm32f4-f7
  spi: stm32: introduction of stm32h7 SPI device mode support
  spi: stm32: use dmaengine_terminate_{a}sync instead of _all
  spi: stm32: renaming of spi_master into spi_controller
  spi: dw: Remove misleading comment for Mount Evans SoC
  spi: dt-bindings: snps,dw-apb-ssi: Add compatible for Intel Mount Evans SoC
  spi: dw: Add compatible for Intel Mount Evans SoC
  spi: s3c64xx: Use dev_err_probe()
  spi: s3c64xx: Use the managed spi master allocation function
  spi: spl022: Probe defer is no error
  spi: spi-imx: fix mixing of native and gpio chipselects for imx51/imx53/imx6 variants
  ...

Merge tag 'regulator-v6.5' of git://git./linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
  the core but otherwise everything is updates to drivers, mostly the
  addition of new ones.

  There's also a bunch of changes pulled in from the MFD subsystem as
  dependencies, Rockchip and TI core MFD code that the regulator drivers
  depend on.

  I've also yet again managed to put a SPI commit in the regulator tree,
  I don't know what it is about those two trees (this for
  spi-geni-qcom).

  Summary:

   - Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
     TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"

* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
  regulator: Add Renesas PMIC RAA215300 driver
  regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
  regulator: ltc3676: Use maple tree register cache
  regulator: ltc3589: Use maple tree register cache
  regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
  regulator: mt6358: Use linear voltage helpers for single range regulators
  regulator: mt6358: Const-ify mt6358_regulator_info data structures
  regulator: mt6358: Drop *_SSHUB regulators
  regulator: mt6358: Merge VCN33_* regulators
  regulator: dt-bindings: mt6358: Drop *_sshub regulators
  regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
  regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
  regulator: Switch two more i2c drivers back to use .probe()
  spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
  soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
  regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
  regulator: axp20x: Add AXP15060 support
  regulator: axp20x: Add support for AXP313a variant
  dt-bindings: pfuze100.yaml: Add an entry for interrupts
  regulator: stm32-pwr: Fix regulator disabling
  ...

Merge tag 'regmap-v6.5' of git://git./linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
"Another busy release for regmap with the second half of the maple tree
  register cache implementation, there's some smaller optimisations that
  could be done but this should now be able to replace the rbtree cache
  for most devices.

  We also had a followup from Aidan MacDonald's refactoring of some of
  the regmap-irq interfaces, the conversion is complete so the old
  interfaces are removed. This means that even with the new features for
  the maple tree cache we'd have a nice negative diffstat were it not
  for the addition of a bunch more KUnit coverage.

  There's one GPIO patch in here, it was a dependency for a cleanup of
  an API in the regmap-irq code for which the gpio-104-dio-48e driver
  was the only user.

  Highlights:

   - The maple tree cache can now load in default values more
     efficiently, and is capabale of syncing multiple registers
     in a single write during cache sync

   - More KUnit coverage, including some coverage for raw I/O
     and a dummy RAM backed cache to support it

   - Removal of several old interfaces in regmap-irq now all
     users have been modernised"

* tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
  regmap: Allow reads from write only registers with the flat cache
  regmap: Drop early readability check
  regmap: Check for register readability before checking cache during read
  regmap: Add test to make sure we don't sync to read only registers
  regmap: Add a test case for write only registers
  regmap: Add test that writes to write only registers are prevented
  regmap: Add debugfs file for forcing field writes
  regmap: Don't check for changes in regcache_set_val()
  regmap: maple: Implement block sync for the maple tree cache
  regmap: Provide basic KUnit coverage for the raw register I/O
  regmap: Provide a ram backed regmap with raw support
  regmap: Add missing cache_only checks
  regmap: regmap-irq: Move handle_post_irq to before pm_runtime_put
  regmap: Load register defaults in blocks rather than register by register
  regmap: mmio: Allow passing an empty config->reg_stride
  regmap-irq: Drop backward compatibility for inverted mask/unmask
  regmap-irq: Minor adjustments to .handle_mask_sync()
  regmap-irq: Remove support for not_fixed_stride
  regmap-irq: Remove type registers
  regmap-irq: Remove virtual registers
  ...

x86/mem_encrypt: Remove stale mem_encrypt_init() declaration

The memory encryption initialization logic was moved from init/main.c
into arch_cpu_finalize_init() in commit 439e17576eb4 ("init, x86: Move
mem_encrypt_init() into arch_cpu_finalize_init()"), but a stale
declaration for the init function was left in <linux/init.h>.

And didn't cause any problems if you had X86_MEM_ENCRYPT enabled, which
apparently everybody involved did have. See also commit 0a9567ac5e6a
("x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build") in this whole
sad saga of conflicting declarations for different situations.

Reported-by: Matthew Wilcox <willy@infradead.org>
Fixes: 439e17576eb4 init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix __access_remote_vm() GUP failure case

Commit ca5e863233e8 ("mm/gup: remove vmas parameter from
get_user_pages_remote()") removed the vma argument from GUP handling,
and instead added a helper function (get_user_page_vma_remote()) that
looks it up separately using 'vma_lookup()'.  And then converted
existing users that needed a vma to use the helper instead.

However, the helper function intentionally acts exactly like the old
get_user_pages_remote() did, and only fills in 'vma' on successful page
lookup.  Fine so far.

However, __access_remote_vm() wants the vma even for the unsuccessful
case, and used to do a

vma = vma_lookup(mm, addr);

explicitly to look it up when the get_user_page() failed.

However, that conversion commit incorrectly removed that vma lookup,
thinking that get_user_page_vma_remote() would have done it.  Not so.

So add the vma_lookup() back in.

Fixes: ca5e863233e8 ("mm/gup: remove vmas parameter from get_user_pages_remote()")
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git./linux/kernel/git/akpm/mm

Pull non-mm updates from Andrew Morton:

- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
   directories

- Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector. It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs

- Zhen Lei has enhanced kexec's ability to support two crash regions

- Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries

- And the usual bunch of singleton patches in various places

* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  kernel/time/posix-stubs.c: remove duplicated include
  ocfs2: remove redundant assignment to variable bit_off
  watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
  devres: show which resource was invalid in __devm_ioremap_resource()
  watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
  watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
  watchdog/hardlockup: make the config checks more straightforward
  watchdog/hardlockup: sort hardlockup detector related config values a logical way
  watchdog/hardlockup: move SMP barriers from common code to buddy code
  watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
  watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
  watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
  watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
  watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
  watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
  watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
  watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
  ...

Merge tag 'mm-stable-2023-06-24-19-15' of git://git./linux/kernel/git/akpm/mm

Pull mm updates from Andrew Morton:

- Yosry Ahmed brought back some cgroup v1 stats in OOM logs

- Yosry has also eliminated cgroup's atomic rstat flushing

- Nhat Pham adds the new cachestat() syscall. It provides userspace
   with the ability to query pagecache status - a similar concept to
   mincore() but more powerful and with improved usability

- Mel Gorman provides more optimizations for compaction, reducing the
   prevalence of page rescanning

- Lorenzo Stoakes has done some maintanance work on the
   get_user_pages() interface

- Liam Howlett continues with cleanups and maintenance work to the
   maple tree code. Peng Zhang also does some work on maple tree

- Johannes Weiner has done some cleanup work on the compaction code

- David Hildenbrand has contributed additional selftests for
   get_user_pages()

- Thomas Gleixner has contributed some maintenance and optimization
   work for the vmalloc code

- Baolin Wang has provided some compaction cleanups,

- SeongJae Park continues maintenance work on the DAMON code

- Huang Ying has done some maintenance on the swap code's usage of
   device refcounting

- Christoph Hellwig has some cleanups for the filemap/directio code

- Ryan Roberts provides two patch series which yield some
   rationalization of the kernel's access to pte entries - use the
   provided APIs rather than open-coding accesses

- Lorenzo Stoakes has some fixes to the interaction between pagecache
   and directio access to file mappings

- John Hubbard has a series of fixes to the MM selftesting code

- ZhangPeng continues the folio conversion campaign

- Hugh Dickins has been working on the pagetable handling code, mainly
   with a view to reducing the load on the mmap_lock

- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
   from 128 to 8

- Domenico Cerasuolo has improved the zswap reclaim mechanism by
   reorganizing the LRU management

- Matthew Wilcox provides some fixups to make gfs2 work better with the
   buffer_head code

- Vishal Moola also has done some folio conversion work

- Matthew Wilcox has removed the remnants of the pagevec code - their
   functionality is migrated over to struct folio_batch

* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
  mm/hugetlb: remove hugetlb_set_page_subpool()
  mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
  hugetlb: revert use of page_cache_next_miss()
  Revert "page cache: fix page_cache_next/prev_miss off by one"
  mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
  mm: memcg: rename and document global_reclaim()
  mm: kill [add|del]_page_to_lru_list()
  mm: compaction: convert to use a folio in isolate_migratepages_block()
  mm: zswap: fix double invalidate with exclusive loads
  mm: remove unnecessary pagevec includes
  mm: remove references to pagevec
  mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
  mm: remove struct pagevec
  net: convert sunrpc from pagevec to folio_batch
  i915: convert i915_gpu_error to use a folio_batch
  pagevec: rename fbatch_count()
  mm: remove check_move_unevictable_pages()
  drm: convert drm_gem_put_pages() to use a folio_batch
  i915: convert shmem_sg_free_table() to use a folio_batch
  scatterlist: add sg_set_folio()
  ...

Merge tag 'docs-arm64-move' of git://git.lwn.net/linux

Pull arm64 documentation move from Jonathan Corbet:
"Move the arm64 architecture documentation under Documentation/arch/.

  This brings some order to the documentation directory, declutters the
  top-level directory, and makes the documentation organization more
  closely match that of the source"

* tag 'docs-arm64-move' of git://git.lwn.net/linux:
  perf arm-spe: Fix a dangling Documentation/arm64 reference
  mm: Fix a dangling Documentation/arm64 reference
  arm64: Fix dangling references to Documentation/arm64
  dt-bindings: fix dangling Documentation/arm64 reference
  docs: arm64: Move arm64 documentation under Documentation/arch/

Merge tag 'hardening-v6.5-rc1' of git://git./linux/kernel/git/kees/linux

Pull hardening updates from Kees Cook:
"There are three areas of note:

  A bunch of strlcpy()->strscpy() conversions ended up living in my tree
  since they were either Acked by maintainers for me to carry, or got
  ignored for multiple weeks (and were trivial changes).

  The compiler option '-fstrict-flex-arrays=3' has been enabled
  globally, and has been in -next for the entire devel cycle. This
  changes compiler diagnostics (though mainly just -Warray-bounds which
  is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
  coverage. In other words, there are no new restrictions, just
  potentially new warnings. Any new FORTIFY warnings we've seen have
  been fixed (usually in their respective subsystem trees). For more
  details, see commit df8fc4e934c12b.

  The under-development compiler attribute __counted_by has been added
  so that we can start annotating flexible array members with their
  associated structure member that tracks the count of flexible array
  elements at run-time. It is possible (likely?) that the exact syntax
  of the attribute will change before it is finalized, but GCC and Clang
  are working together to sort it out. Any changes can be made to the
  macro while we continue to add annotations.

  As an example of that last case, I have a treewide commit waiting with
  such annotations found via Coccinelle:

    https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b

  Also see commit dd06e72e68bcb4 for more details.

  Summary:

   - Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)

   - Convert strreplace() to return string start (Andy Shevchenko)

   - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)

   - Add missing function prototypes seen with W=1 (Arnd Bergmann)

   - Fix strscpy() kerndoc typo (Arne Welzel)

   - Replace strlcpy() with strscpy() across many subsystems which were
     either Acked by respective maintainers or were trivial changes that
     went ignored for multiple weeks (Azeem Shaikh)

   - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)

   - Add KUnit tests for strcat()-family

   - Enable KUnit tests of FORTIFY wrappers under UML

   - Add more complete FORTIFY protections for strlcat()

   - Add missed disabling of FORTIFY for all arch purgatories.

   - Enable -fstrict-flex-arrays=3 globally

   - Tightening UBSAN_BOUNDS when using GCC

   - Improve checkpatch to check for strcpy, strncpy, and fake flex
     arrays

   - Improve use of const variables in FORTIFY

   - Add requested struct_size_t() helper for types not pointers

   - Add __counted_by macro for annotating flexible array size members"

* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
  netfilter: ipset: Replace strlcpy with strscpy
  uml: Replace strlcpy with strscpy
  um: Use HOST_DIR for mrproper
  kallsyms: Replace all non-returning strlcpy with strscpy
  sh: Replace all non-returning strlcpy with strscpy
  of/flattree: Replace all non-returning strlcpy with strscpy
  sparc64: Replace all non-returning strlcpy with strscpy
  Hexagon: Replace all non-returning strlcpy with strscpy
  kobject: Use return value of strreplace()
  lib/string_helpers: Change returned value of the strreplace()
  jbd2: Avoid printing outside the boundary of the buffer
  checkpatch: Check for 0-length and 1-element arrays
  riscv/purgatory: Do not use fortified string functions
  s390/purgatory: Do not use fortified string functions
  x86/purgatory: Do not use fortified string functions
  acpi: Replace struct acpi_table_slit 1-element array with flex-array
  clocksource: Replace all non-returning strlcpy with strscpy
  string: use __builtin_memcpy() in strlcpy/strlcat
  staging: most: Replace all non-returning strlcpy with strscpy
  drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
  ...

Merge tag 'pstore-v6.5-rc1' of git://git./linux/kernel/git/kees/linux

Pull pstore updates from Kees Cook:

- Check for out-of-memory condition (Jiasheng Jiang)

- Convert to platform remove callback returning void (Uwe Kleine-König)

* tag 'pstore-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Add check for kstrdup
pstore/ram: Convert to platform remove callback returning void

Merge tag 'execve-v6.5-rc1' of git://git./linux/kernel/git/kees/linux

Pull execve updates from Kees Cook:

- Fix a few comments for correctness and typos (Baruch Siach)

- Small simplifications for binfmt (Christophe JAILLET)

- Set p_align to 4 for PT_NOTE in core dump (Fangrui Song)

* tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  binfmt_elf: fix comment typo s/reset/regset/
  elf: correct note name comment
  binfmt: Slightly simplify elf_fdpic_map_file()
  binfmt: Use struct_size()
  coredump, vmcore: Set p_align to 4 for PT_NOTE

Merge tag 'Smack-for-6.5' of https://github.com/cschaufler/smack-next

Pull smack updates from Casey Schaufler:
"There are two patches, both of which change how Smack initializes the
  SMACK64TRANSMUTE extended attribute.

  The first corrects the behavior of overlayfs, which creates inodes
  differently from other filesystems. The second ensures that transmute
  attributes specified by mount options are correctly assigned"

* tag 'Smack-for-6.5' of https://github.com/cschaufler/smack-next:
  smack: Record transmuting in smk_transmuted
  smack: Retrieve transmuting information in smack_inode_getsecurity()

Merge tag 'integrity-v6.5' of git://git./linux/kernel/git/zohar/linux-integrity

Pull integrity subsystem updates from Mimi Zohar:
"An i_version change, one bug fix, and three kernel doc fixes:

   - instead of IMA detecting file change by directly accesssing
     i_version, it now calls vfs_getattr_nosec().

   - fix a race condition when inserting a new node in the iint rb-tree"

* tag 'integrity-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Fix build warnings
  evm: Fix build warnings
  evm: Complete description of evm_inode_setattr()
  integrity: Fix possible multiple allocation in integrity_inode_get()
  IMA: use vfs_getattr_nosec to get the i_version

Merge tag 'lsm-pr-20230626' of git://git./linux/kernel/git/pcmoore/lsm

Pull lsm updates from Paul Moore:

- A SafeSetID patch to correct what appears to be a cut-n-paste typo in
   the code causing a UID to be printed where a GID was desired.

   This is coming via the LSM tree because we haven't been able to get a
   response from the SafeSetID maintainer (Micah Morton) in several
   months. Hopefully we are able to get in touch with Micah, but until
   we do I'm going to pick them up in the LSM tree.

- A small fix to the reiserfs LSM xattr code.

   We're continuing to work through some issues with the reiserfs code
   as we try to fixup the LSM xattr handling, but in the process we're
   uncovering some ugly problems in reiserfs and we may just end up
   removing the LSM xattr support in reiserfs prior to reiserfs'
   removal.

   For better or worse, this shouldn't impact any of the reiserfs users,
   as we discovered that LSM xattrs on reiserfs were completely broken,
   meaning no one is currently using the combo of reiserfs and a file
   labeling LSM.

- A tweak to how the cap_user_data_t struct/typedef is declared in the
   header file to appease the Sparse gods.

- In the process of trying to sort out the SafeSetID lost-maintainer
   problem I realized that I needed to update the labeled networking
   entry to "Supported".

- Minor comment/documentation and spelling fixes.

* tag 'lsm-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  device_cgroup: Fix kernel-doc warnings in device_cgroup
  SafeSetID: fix UID printed instead of GID
  MAINTAINERS: move labeled networking to "supported"
  capability: erase checker warnings about struct __user_cap_data_struct
  lsm: fix a number of misspellings
  reiserfs: Initialize sec->length in reiserfs_security_init().
  capability: fix kernel-doc warnings in capability.c

Merge tag 'selinux-pr-20230626' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux updates from Paul Moore:

- Thanks to help from the MPTCP folks, it looks like we have finally
   sorted out a proper solution to the MPTCP socket labeling issue, see
   the new security_mptcp_add_subflow() LSM hook.

- Fix the labeled NFS handling such that a labeled NFS share mounted
   prior to the initial SELinux policy load is properly labeled once a
   policy is loaded; more information in the commit description.

- Two patches to security/selinux/Makefile, the first took the cleanups
   in v6.4 a bit further and the second removed the grouped targets
   support as that functionality doesn't appear to be properly supported
   prior to make v4.3.

- Deprecate the "fs" object context type in SELinux policies. The fs
   object context type was an old vestige that was introduced back in
   v2.6.12-rc2 but never really used.

- A number of small changes that remove dead code, clean up some
   awkward bits, and generally improve the quality of the code. See the
   individual commit descriptions for more information.

* tag 'selinux-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: avoid bool as identifier name
  selinux: fix Makefile for versions of make < v4.3
  selinux: make labeled NFS work when mounted before policy load
  selinux: cleanup exit_sel_fs() declaration
  selinux: deprecated fs ocon
  selinux: make header files self-including
  selinux: keep context struct members in sync
  selinux: Implement mptcp_add_subflow hook
  security, lsm: Introduce security_mptcp_add_subflow()
  selinux: small cleanups in selinux_audit_rule_init()
  selinux: declare read-only data arrays const
  selinux: retain const qualifier on string literal in avtab_hash_eval()
  selinux: drop return at end of void function avc_insert()
  selinux: avc: drop unused function avc_disable()
  selinux: adjust typos in comments
  selinux: do not leave dangling pointer behind
  selinux: more Makefile tweaks

Merge tag 'audit-pr-20230626' of git://git./linux/kernel/git/pcmoore/audit

Pull audit update from Paul Moore:
"A single audit patch that resolves two compiler warnings regarding
missing function prototypes"

* tag 'audit-pr-20230626' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: avoid missing-prototype warnings

Merge tag 'landlock-6.5-rc1' of git://git./linux/kernel/git/mic/linux

Pull landlock updates from Mickaël Salaün:
"Add support for Landlock to UML.

  To do this, this fixes the way hostfs manages inodes according to the
  underlying filesystem [1]. They are now properly handled as for other
  filesystems, which enables Landlock support (and probably other
  features).

  This also extends Landlock's tests with 6 pseudo filesystems,
  including hostfs"

[1] https://lore.kernel.org/all/20230612191430.339153-1-mic@digikod.net/

* tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Add hostfs tests
  selftests/landlock: Add tests for pseudo filesystems
  selftests/landlock: Make mounts configurable
  selftests/landlock: Add supports_filesystem() helper
  selftests/landlock: Don't create useless file layouts
  hostfs: Fix ephemeral inodes

Merge tag 'cgroup-for-6.5' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:

- Whenever cpuset needs to rebuild sched_domain, it walked all tasks
   looking for DEADLINE tasks as they need to be accounted on the new
   domain. Walking all tasks can be expensive and there may not be any
   DEADLINE tasks at all. Task iteration is now omitted if there are no
   DEADLINE tasks

- Fixes DEADLINE bandwidth misaccounting after task migration failures

- When no controller is enabled, -Wstringop-overflow warning is
   triggered. The fix patch added an early exit which is too eager and
   got reverted for now. Will fix later

- Everything else is minor cleanups

* tag 'cgroup-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Revert "cgroup: Avoid -Wstringop-overflow warnings"
  cgroup/misc: Expose misc.current on cgroup v2 root
  cgroup: Avoid -Wstringop-overflow warnings
  cgroup: remove obsolete comment on cgroup_on_dfl()
  cgroup: remove unused task_cgroup_path()
  cgroup/cpuset: remove unneeded header files
  cgroup: make cgroup_is_threaded() and cgroup_is_thread_root() static
  rdmacg: fix kernel-doc warnings in rdmacg
  cgroup: Replace the css_set call with cgroup_get
  cgroup: remove unused macro for_each_e_css()
  cgroup: Update out-of-date comment in cgroup_migrate()
  cgroup: Replace all non-returning strlcpy with strscpy
  cgroup/cpuset: remove unneeded header files
  cgroup/cpuset: Free DL BW in case can_attach() fails
  sched/deadline: Create DL BW alloc, free & check overflow interface
  cgroup/cpuset: Iterate only if DEADLINE tasks are present
  sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets
  sched/cpuset: Bring back cpuset_mutex
  cgroup/cpuset: Rename functions dealing with DEADLINE accounting

Merge tag 'wq-for-6.5-cleanup-ordered' of git://git./linux/kernel/git/tj/wq

Pull ordered workqueue creation updates from Tejun Heo:
"For historical reasons, unbound workqueues with max concurrency limit
  of 1 are considered ordered, even though the concurrency limit hasn't
  been system-wide for a long time.

  This creates ambiguity around whether ordered execution is actually
  required for correctness, which was actually confusing for e.g. btrfs
  (btrfs updates are being routed through the btrfs tree).

  There aren't that many users in the tree which use the combination and
  there are pending improvements to unbound workqueue affinity handling
  which will make inadvertent use of ordered workqueue a bigger loss.

  This clarifies the situation for most of them by updating the ones
  which require ordered execution to use alloc_ordered_workqueue().

  There are some conversions being routed through subsystem-specific
  trees and likely a few stragglers. Once they're all converted,
  workqueue can trigger a warning on unbound + @max_active==1 usages and
  eventually drop the implicit ordered behavior"

* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
  net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
  net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
  dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
  media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
  scsi: NCR5380: Use default @max_active for hostdata->work_q
  media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
  crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
  wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
  wifi: mwifiex: Use default @max_active for workqueues
  wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
  xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
  virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
  net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
  net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
  greybus: Use alloc_ordered_workqueue() to create ordered workqueues
  powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues

Merge tag 'wq-for-6.5' of git://git./linux/kernel/git/tj/wq

Pull workqueue updates from Tejun Heo:

- Concurrency-managed per-cpu work items that hog CPUs and delay the
   execution of other work items are now automatically detected and
   excluded from concurrency management. Reporting on such work items
   can also be enabled through a config option.

- Added tools/workqueue/wq_monitor.py which improves visibility into
   workqueue usages and behaviors.

- Arnd's minimal fix for gcc-13 enum warning on 32bit compiles,
   superseded by commit afa4bb778e48 in mainline.

* tag 'wq-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Disable per-cpu CPU hog detection when wq_cpu_intensive_thresh_us is 0
  workqueue: Fix WARN_ON_ONCE() triggers in worker_enter_idle()
  workqueue: fix enum type for gcc-13
  workqueue: Track and monitor per-workqueue CPU time usage
  workqueue: Report work funcs that trigger automatic CPU_INTENSIVE mechanism
  workqueue: Automatically mark CPU-hogging work items CPU_INTENSIVE
  workqueue: Improve locking rule description for worker fields
  workqueue: Move worker_set/clr_flags() upwards
  workqueue: Re-order struct worker fields
  workqueue: Add pwq->stats[] and a monitoring script
  Further upgrade queue_work_on() comment

Merge tag 'for-linus-6.5-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:

- three patches adding missing prototypes

- a fix for finding the iBFT in a Xen dom0 for supporting diskless
   iSCSI boot

* tag 'for-linus-6.5-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86: xen: add missing prototypes
  x86/xen: add prototypes for paravirt mmu functions
  iscsi_ibft: Fix finding the iBFT under Xen Dom 0
  xen: xen_debug_interrupt prototype to global header

Merge tag 's390-6.5-1' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Alexander Gordeev:

- Fix the style of protected key API driver source: use x-mas tree for
   all local variable declarations

- Rework protected key API driver to not use the struct pkey_protkey
   and pkey_clrkey anymore. Both structures have a fixed size buffer,
   but with the support of ECC protected key these buffers are not big
   enough. Use dynamic buffers internally and transparently for
   userspace

- Add support for a new 'non CCA clear key token' with ECC clear keys
   supported: ECC P256, ECC P384, ECC P521, ECC ED25519 and ECC ED448.
   This makes it possible to derive a protected key from the ECC clear
   key input via PKEY_KBLOB2PROTK3 ioctl, while currently the only way
   to derive is via PCKMO instruction

- The s390 PMU of PAI crypto and extension 1 NNPA counters use atomic_t
   for reference counting. Replace this with the proper data type
   refcount_t

- Select ARCH_SUPPORTS_INT128, but limit this to clang for now, since
   gcc generates inefficient code, which may lead to stack overflows

- Replace one-element array with flexible-array member in struct
   vfio_ccw_parent and refactor the rest of the code accordingly. Also,
   prefer struct_size() over sizeof() open- coded versions

- Introduce OS_INFO_FLAGS_ENTRY pointing to a flags field and
   OS_INFO_FLAG_REIPL_CLEAR flag that informs a dumper whether the
   system memory should be cleared or not once dumped

- Fix a hang when a user attempts to remove a VFIO-AP mediated device
   attached to a guest: add VFIO_DEVICE_GET_IRQ_INFO and
   VFIO_DEVICE_SET_IRQS IOCTLs and wire up the VFIO bus driver callback
   to request a release of the device

- Fix calculation for R_390_GOTENT relocations for modules

- Allow any user space process with CAP_PERFMON capability read and
   display the CPU Measurement facility counter sets

- Rework large statically-defined per-CPU cpu_cf_events data structure
   and replace it with dynamically allocated structures created when a
   perf_event_open() system call is invoked or /dev/hwctr device is
   accessed

* tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_events
  s390/cpum_cf: open access to hwctr device for CAP_PERFMON privileged process
  s390/module: fix rela calculation for R_390_GOTENT
  s390/vfio-ap: wire in the vfio_device_ops request callback
  s390/vfio-ap: realize the VFIO_DEVICE_SET_IRQS ioctl
  s390/vfio-ap: realize the VFIO_DEVICE_GET_IRQ_INFO ioctl
  s390/pkey: add support for ecc clear key
  s390/pkey: do not use struct pkey_protkey
  s390/pkey: introduce reverse x-mas trees
  s390/zcore: conditionally clear memory on reipl
  s390/ipl: add REIPL_CLEAR flag to os_info
  vfio/ccw: use struct_size() helper
  vfio/ccw: replace one-element array with flexible-array member
  s390: select ARCH_SUPPORTS_INT128
  s390/pai_ext: replace atomic_t with refcount_t
  s390/pai_crypto: replace atomic_t with refcount_t

Merge tag 'xtensa-20230627' of https://github.com/jcmvbkbc/linux-xtensa

Pull xtensa updates from Max Filippov:

- clean up platform_* interface of the xtensa architecture

- enable HAVE_ASM_MODVERSIONS

- drop ARCH_WANT_FRAME_POINTERS

- clean up unaligned access exception handler

- provide handler for load/store exceptions

- various small fixes and cleanups

* tag 'xtensa-20230627' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: dump userspace code around the exception PC
  xtensa: rearrange show_stack output
  xtensa: add load/store exception handler
  xtensa: rearrange unaligned exception handler
  xtensa: always install slow handler for unaligned access exception
  xtensa: move early_trap_init from kasan_early_init to init_arch
  xtensa: drop ARCH_WANT_FRAME_POINTERS
  xtensa: report trax and perf counters in cpuinfo
  xtensa: add asm-prototypes.h
  xtensa: only build __strncpy_user with CONFIG_ARCH_HAS_STRNCPY_FROM_USER
  xtensa: drop bcopy implementation
  xtensa: drop EXPORT_SYMBOL for common_exception_return
  xtensa: boot-redboot: clean up Makefile
  xtensa: clean up default platform functions
  xtensa: drop platform_halt and platform_power_off
  xtensa: drop platform_restart
  xtensa: drop platform_heartbeat
  xtensa: xt2000: drop empty platform_init

Revert "nios2: Convert __pte_free_tlb() to use ptdescs"

This reverts commit 6ebe94baa2b9ddf3ccbb7f94df6ab26234532734.

The patch "nios2: Convert __pte_free_tlb() to use ptdescs" was supposed
to go together with a patchset that Vishal Moola had planned taking it
through the mm tree. By just having this patch, all NIOS2 builds are
broken.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>