ASoC: SOF: ipc3: Check for upper size limit for the received message

[ Upstream commit 989a3e4479177d0f4afab8be1960731bc0ffbbd0 ]

The sof_ipc3_rx_msg() checks for minimum size of a new rx message but it is
missing the check for upper limit.
Corrupted or compromised firmware might be able to take advantage of this
to cause out of bounds reads outside of the message area.

Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114917.5124-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Add backlight=native DMI quirk for Dell Vostro 15 3535

[ Upstream commit 89b0411481967a2e8c91190a211a359966cfcf4b ]

Sometimes the system boots up with a acpi_video0 backlight interface
which doesn't work. So add Dell Vostro 15 3535 into the
video_detect_dmi_table to set it to native explicitly.

Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zstd: Fix definition of assert()

[ Upstream commit 6906598f1ce93761716d780b6e3f171e13f0f4ce ]

assert(x) should emit a warning if x is false. WARN_ON(x) emits a
warning if x is true. Thus, assert(x) should be defined as WARN_ON(!x)
rather than WARN_ON(x).

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: nau8825: Adjust clock control

[ Upstream commit 6206b2e787da2ed567922c37bb588a44f6fb6705 ]

Internal clock shall be adjusted also in cases when DAPM event other
than 'ON' is triggered.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: ssm4567: Remove nau8825 bits

[ Upstream commit 933de2d127281731166cf2880fa1e23c5a0f7faa ]

Some of the nau8825 clock control got into the ssm4567, remove it.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: da7219: Explicitly define codec format

[ Upstream commit 61f368624fe4d0c25c6e9c917574b8ace51d776e ]

da7219 is headset codec configured in 48000/2/S24_LE format regardless
of front end format, so force it to be so.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: avs: max98357a: Explicitly define codec format

[ Upstream commit d16c893425d07ada1fdd817ec06d322efcf69480 ]

max98357a is speaker codec configured in 48000/2/S16_LE format
regardless of front end format, so force it to be so.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds

[ Upstream commit e5e7e398f6bb7918dab0612eb6991f7bae95520d ]

When we run syzkaller we get below Out of Bound.
    "KASAN: slab-out-of-bounds Read in regcache_flat_read"

    Below is the backtrace of the issue:

    dump_backtrace+0x0/0x4c8
    show_stack+0x34/0x44
    dump_stack_lvl+0xd8/0x118
    print_address_description+0x30/0x2d8
    kasan_report+0x158/0x198
    __asan_report_load4_noabort+0x44/0x50
    regcache_flat_read+0x10c/0x110
    regcache_read+0xf4/0x180
    _regmap_read+0xc4/0x278
    _regmap_update_bits+0x130/0x290
    regmap_update_bits_base+0xc0/0x15c
    snd_soc_component_update_bits+0xa8/0x22c
    snd_soc_component_write_field+0x68/0xd4
    tx_macro_digital_mute+0xec/0x140

    Actually There is no need to have decimator with 32 bits.
    By limiting the variable with short type u8 issue is resolved.

Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Link: https://lore.kernel.org/r/20230304080702.609-1-quic_visr@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Zero padding when dumping algos and encap

[ Upstream commit 8222d5910dae08213b6d9d4bc9a7f8502855e624 ]

When copying data to user-space we should ensure that only valid
data is copied over.  Padding in structures may be filled with
random (possibly sensitve) data and should never be given directly
to user-space.

This patch fixes the copying of xfrm algorithms and the encap
template in xfrm_user so that padding is zeroed.

Reported-by: syzbot+fa5414772d5c445dac3c@syzkaller.appspotmail.com
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix missing unload_nls() in smb2_reconnect()

[ Upstream commit c24bb1a87dc3f2d77d410eaac2c6a295961bf50e ]

Make sure to unload_nls() @nls_codepage if we no longer need it.

Fixes: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: efi: Set NX compat flag in PE/COFF header

[ Upstream commit 3c66bb1918c262dd52fb4221a8d372619c5da70a ]

The PE/COFF header has a NX compat flag which informs the firmware that
the application does not rely on memory regions being mapped with both
executable and writable permissions at the same time.

This is typically used by the firmware to decide whether it can set the
NX attribute on all allocations it returns, but going forward, it may be
used to enforce a policy that only permits applications with the NX flag
set to be loaded to begin wiht in some configurations, e.g., when Secure
Boot is in effect.

Even though the arm64 version of the EFI stub may relocate the kernel
before executing it, it always did so after disabling the MMU, and so we
were always in line with what the NX compat flag conveys, we just never
bothered to set it.

So let's set the flag now.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: fix stats region batching

[ Upstream commit 6acc72a43eac78a309160d0a7512bbc59bcdd757 ]

The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".

However, "u32 reg" is not quite a register address, but an enum
ocelot_reg, which in itself encodes an enum ocelot_target target in the
upper bits, and an index into the ocelot->map[target][] array in the
lower bits.

So, whereas the previous code comparison between stats_layout[i].offset
and last + 1 was correct (because those "offsets" at the time were
32-bit relative addresses), the new code, comparing layout[i].reg to
last + 4 is not correct, because the "reg" here is an enum/index, not an
actual register address.

What we want to compare are indeed register addresses, but to do that,
we need to actually go through the same motions as
__ocelot_bulk_read_ix() itself.

With this bug, all statistics counters are deemed by
ocelot_prepare_stats_regions() as constituting their own region.
(Truncated) log on VSC9959 (Felix) below (prints added by me):

Before:

region of 1 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x001]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x002]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x041]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x042]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x081]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x100]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x101]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x111]

After:

region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]

Since commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats") intended bulking as a performance improvement, and since now,
with trivial-sized regions, performance is even worse than without
bulking at all, this could easily qualify as a performance regression.

Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Do not let histogram values have some modifiers

[ Upstream commit e0213434fe3e4a0d118923dc98d31e7ff1cd9e45 ]

Histogram values can not be strings, stacktraces, graphs, symbols,
syscalls, or grouped in buckets or log. Give an error if a value is set to
do so.

Note, the histogram code was not prepared to handle these modifiers for
histograms and caused a bug.

Mark Rutland reported:

 # echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events
 # echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/kernel/tracing/events/kprobes/copy_to_user/trigger
 # cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist
[  143.694628] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  143.695190] Mem abort info:
[  143.695362]   ESR = 0x0000000096000004
[  143.695604]   EC = 0x25: DABT (current EL), IL = 32 bits
[  143.695889]   SET = 0, FnV = 0
[  143.696077]   EA = 0, S1PTW = 0
[  143.696302]   FSC = 0x04: level 0 translation fault
[  143.702381] Data abort info:
[  143.702614]   ISV = 0, ISS = 0x00000004
[  143.702832]   CM = 0, WnR = 0
[  143.703087] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000448f9000
[  143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[  143.704137] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[  143.704714] Modules linked in:
[  143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3
[  143.706138] Hardware name: linux,dummy-virt (DT)
[  143.706723] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  143.707120] pc : hist_field_name.part.0+0x14/0x140
[  143.707504] lr : hist_field_name.part.0+0x104/0x140
[  143.707774] sp : ffff800008333a30
[  143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0
[  143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800
[  143.708776] x23: ffffd7a6539b27b0 x22: ffff10d303fb8c00 x21: 0000000000000001
[  143.709127] x20: ffff10d303ec2000 x19: 0000000000000000 x18: 0000000000000000
[  143.709478] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[  143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023
[  143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c
[  143.710584] x8 : 000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c
[  143.710915] x5 : ffff10d303b0103e x4 : ffffd7a653b20261 x3 : 000000000000003d
[  143.711239] x2 : 0000000000020001 x1 : 0000000000000001 x0 : 0000000000000000
[  143.711746] Call trace:
[  143.712115]  hist_field_name.part.0+0x14/0x140
[  143.712642]  hist_field_name.part.0+0x104/0x140
[  143.712925]  hist_field_print+0x28/0x140
[  143.713125]  event_hist_trigger_print+0x174/0x4d0
[  143.713348]  hist_show+0xf8/0x980
[  143.713521]  seq_read_iter+0x1bc/0x4b0
[  143.713711]  seq_read+0x8c/0xc4
[  143.713876]  vfs_read+0xc8/0x2a4
[  143.714043]  ksys_read+0x70/0xfc
[  143.714218]  __arm64_sys_read+0x24/0x30
[  143.714400]  invoke_syscall+0x50/0x120
[  143.714587]  el0_svc_common.constprop.0+0x4c/0x100
[  143.714807]  do_el0_svc+0x44/0xd0
[  143.714970]  el0_svc+0x2c/0x84
[  143.715134]  el0t_64_sync_handler+0xbc/0x140
[  143.715334]  el0t_64_sync+0x190/0x194
[  143.715742] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000)
[  143.716510] ---[ end trace 0000000000000000 ]---
Segmentation fault

Link: https://lkml.kernel.org/r/20230302020810.559462599@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: c6afad49d127f ("tracing: Add hist trigger 'sym' and 'sym-offset' modifiers")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Add .graph suffix option to histogram value

[ Upstream commit a2c54256dec7510477e2b4f4db187e638f7cac37 ]

Add the .graph suffix which shows the bar graph of the histogram value.

For example, the below example shows that the bar graph
of the histogram of the runtime for each tasks.

------
  # cd /sys/kernel/debug/tracing/
  # echo hist:keys=pid:vals=runtime.graph:sort=pid > \
   events/sched/sched_stat_runtime/trigger
  # sleep 10
  # cat events/sched/sched_stat_runtime/hist
 # event histogram
 #
 # trigger info: hist:keys=pid:vals=hitcount,runtime.graph:sort=pid:size=2048 [active]
 #

 { pid:         14 } hitcount:          2  runtime:
 { pid:         16 } hitcount:          8  runtime:
 { pid:         26 } hitcount:          1  runtime:
 { pid:         57 } hitcount:          3  runtime:
 { pid:         61 } hitcount:         20  runtime: ###
 { pid:         66 } hitcount:          2  runtime:
 { pid:         70 } hitcount:          3  runtime:
 { pid:         72 } hitcount:          2  runtime:
 { pid:        145 } hitcount:         14  runtime: ####################
 { pid:        152 } hitcount:          5  runtime: #######
 { pid:        153 } hitcount:          2  runtime: ####

 Totals:
     Hits: 62
     Entries: 11
     Dropped: 0
-------

Link: https://lore.kernel.org/linux-trace-kernel/166610813953.56030.10944148382315789485.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Stable-dep-of: e0213434fe3e ("tracing: Do not let histogram values have some modifiers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Add .percent suffix option to histogram values

[ Upstream commit abaa5258ce5e5887a9de049f50a85dc023391a1c ]

Add .percent suffix option to show the histogram values in percentage.
This feature is useful when we need yo undersntand the overall trend
for the histograms of large values.
E.g. this shows the runtime percentage for each tasks.

------
  # cd /sys/kernel/debug/tracing/
  # echo hist:keys=pid:vals=hitcount,runtime.percent:sort=pid > \
    events/sched/sched_stat_runtime/trigger
  # sleep 10
  # cat events/sched/sched_stat_runtime/hist
 # event histogram
 #
 # trigger info: hist:keys=pid:vals=hitcount,runtime.percent:sort=pid:size=2048 [active]
 #

 { pid:          8 } hitcount:          7  runtime (%):   4.14
 { pid:         14 } hitcount:          5  runtime (%):   3.69
 { pid:         16 } hitcount:         11  runtime (%):   3.41
 { pid:         61 } hitcount:         41  runtime (%):  19.75
 { pid:         65 } hitcount:          4  runtime (%):   1.48
 { pid:         70 } hitcount:          6  runtime (%):   3.60
 { pid:         72 } hitcount:          2  runtime (%):   1.10
 { pid:        144 } hitcount:         10  runtime (%):  32.01
 { pid:        151 } hitcount:          8  runtime (%):  22.66
 { pid:        152 } hitcount:          2  runtime (%):   8.10

 Totals:
     Hits: 96
     Entries: 10
     Dropped: 0
-----

Link: https://lore.kernel.org/linux-trace-kernel/166610813077.56030.4238090506973562347.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Stable-dep-of: e0213434fe3e ("tracing: Do not let histogram values have some modifiers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: fix race on RX DMA shutdown

[ Upstream commit 1be6f2b15f902c02e055ae0b419ca789200473c9 ]

From time to time DMA completion can come in the middle of DMA shutdown:

<process ctx>: <IRQ>:
lpuart32_shutdown()
  lpuart_dma_shutdown()
    del_timer_sync()
lpuart_dma_rx_complete()
  lpuart_copy_rx_to_tty()
    mod_timer()
    lpuart_dma_rx_free()

When the timer fires a bit later, sport->dma_rx_desc is NULL:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
pc : lpuart_copy_rx_to_tty+0xcc/0x5bc
lr : lpuart_timer_func+0x1c/0x2c
Call trace:
 lpuart_copy_rx_to_tty
 lpuart_timer_func
 call_timer_fn
 __run_timers.part.0
 run_timer_softirq
 __do_softirq
 __irq_exit_rcu
 irq_exit
 handle_domain_irq
 gic_handle_irq
 call_on_irq_stack
 do_interrupt_handler
 ...

To fix this fold del_timer_sync() into lpuart_dma_rx_free() after
dmaengine_terminate_sync() to make sure timer will not be re-started in
lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete().

Fixes: 4a8588a1cf86 ("serial: fsl_lpuart: delete timer on shutdown")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API

[ Upstream commit 8682ab0eea89c300ebb120c02ead3999ca5560a8 ]

Convert dmaengine_terminate_all() calls to synchronous and asynchronous
versions where appropriate.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20221123023619.30173-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1be6f2b15f90 ("tty: serial: fsl_lpuart: fix race on RX DMA shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/disp/dpu: fix sc7280_pp base offset

[ Upstream commit ce68153edb5b36ddf87a19ed5a85131498690bbf ]

At sc7280, pingpong block is used to management the dither effects
to reduce distortion at panel. Currently pingpong-0 base offset is
wrongly set at 0x59000. This mistake will not cause system to crash.
However it will make dither not work. This patch correct sc7280 ping
pong-0 block base offset.

Changes in v2:
-- add more details info n regrading of pingpong block at commit text

Fixes: 591e34a091d1 ("drm/msm/disp/dpu1: add support for display for SC7280 target")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/524332/
Link: https://lore.kernel.org/r/1677533800-3125-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: correct sm8250 and sm8350 scaler

[ Upstream commit 03c0c3cb22a4ff29afba1b43f0330289ea80433f ]

QSEED4 is a newer variant of QSEED3LITE, which should be used on
sm8250 and sm8350. Fix the DPU caps structure and used feature masks.

Fixes: d21fc5dfc3df ("drm/msm/dpu1: add support for qseed3lite used on sm8250")
Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/522229/
Link: https://lore.kernel.org/r/20230211231259.1308718-10-dmitry.baryshkov@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: Refactor sc7280_pp location

[ Upstream commit 1a5b5372e3b0a4cc65a0cbb724b1b0859f4ac63c ]

The sc7280_pp declaration is not located by the other _pp
declarations, but rather hidden around the _merge_3d
declarations. Let's fix this to avoid confusion.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/509153/
Link: https://lore.kernel.org/r/20221028120812.339100-3-robert.foss@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Stable-dep-of: 03c0c3cb22a4 ("drm/msm/dpu: correct sm8250 and sm8350 scaler")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: aspeed: p10bmc: Update battery node name

[ Upstream commit a8cef541dd5ef9445130660008c029205c4c5aa5 ]

The ADC sensor for the battery needs to be named "iio-hwmon" for
compatibility with user space applications.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230202152759.67069-1-eajames@linux.ibm.com
Fixes: bf1914e2cfed ("ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230221003352.1218797-1-joel@jms.id.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: ftrace: Fixup panic by disabling preemption

[ Upstream commit 8547649981e6631328cd64f583667501ae385531 ]

In RISCV, we must use an AUIPC + JALR pair to encode an immediate,
forming a jump that jumps to an address over 4K. This may cause errors
if we want to enable kernel preemption and remove dependency from
patching code with stop_machine(). For example, if a task was switched
out on auipc. And, if we changed the ftrace function before it was
switched back, then it would jump to an address that has updated 11:0
bits mixing with previous XLEN:12 part.

p: patched area performed by dynamic ftrace
ftrace_prologue:
p|      REG_S   ra, -SZREG(sp)
p|      auipc   ra, 0x? ------------> preempted
...
change ftrace function
...
p|      jalr    -?(ra) <------------- switched back
p|      REG_L   ra, -SZREG(sp)
func:
xxx
ret

Fixes: afc76b8b8011 ("riscv: Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230112090603.1295340-2-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: ti: am65-cpsw/cpts: Fix CPTS release action

[ Upstream commit 4ad8766cd3982744e53f107f378d2c65b76ff9a8 ]

The am65_cpts_release() function is registered as a devm_action in the
am65_cpts_create() function in am65-cpts driver. When the am65-cpsw driver
invokes am65_cpts_create(), am65_cpts_release() is added in the set of devm
actions associated with the am65-cpsw driver's device.

In the event of probe failure or probe deferral, the platform_drv_probe()
function invokes dev_pm_domain_detach() which powers off the CPSW and the
CPSW's CPTS hardware, both of which share the same power domain. Since the
am65_cpts_disable() function invoked by the am65_cpts_release() function
attempts to reset the CPTS hardware by writing to its registers, the CPTS
hardware is assumed to be powered on at this point. However, the hardware
is powered off before the devm actions are executed.

Fix this by getting rid of the devm action for am65_cpts_release() and
invoking it directly on the cleanup and exit paths.

Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: zoned: count fresh BG region as zone unusable

[ Upstream commit fa2068d7e922b434eba5bfb0131e6d39febfdb48 ]

The naming of space_info->active_total_bytes is misleading. It counts
not only active block groups but also full ones which are previously
active but now inactive. That confusion results in a bug not counting
the full BGs into active_total_bytes on mount time.

For a background, there are three kinds of block groups in terms of
activation.

  1. Block groups never activated
  2. Block groups currently active
  3. Block groups previously active and currently inactive (due to fully
     written or zone finish)

What we really wanted to exclude from "total_bytes" is the total size of
BGs #1. They seem empty and allocatable but since they are not activated,
we cannot rely on them to do the space reservation.

And, since BGs #1 never get activated, they should have no "used",
"reserved" and "pinned" bytes.

OTOH, BGs #3 can be counted in the "total", since they are already full
we cannot allocate from them anyway. For them, "total_bytes == used +
reserved + pinned + zone_unusable" should hold.

Tracking #2 and #3 as "active_total_bytes" (current implementation) is
confusing. And, tracking #1 and subtract that properly from "total_bytes"
every time you need space reservation is cumbersome.

Instead, we can count the whole region of a newly allocated block group as
zone_unusable. Then, once that block group is activated, release
[0 ..  zone_capacity] from the zone_unusable counters. With this, we can
eliminate the confusing ->active_total_bytes and the code will be common
among regular and the zoned mode. Also, no additional counter is needed
with this approach.

Fixes: 6a921de58992 ("btrfs: zoned: introduce space_info->active_total_bytes")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: rename BTRFS_FS_NO_OVERCOMMIT to BTRFS_FS_ACTIVE_ZONE_TRACKING

[ Upstream commit bf1f1fec2724a33b67ec12032402ea75f2a83622 ]

This flag only gets set when we're doing active zone tracking, and we're
going to need to use this flag for things related to this behavior.
Rename the flag to represent what it actually means for the file system
so it can be used in other ways and still make sense.

Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcsan: avoid passing -g for test

[ Upstream commit 5eb39cde1e2487ba5ec1802dc5e58a77e700d99e ]

Nathan reported that when building with GNU as and a version of clang that
defaults to DWARF5, the assembler will complain with:

  Error: non-constant .uleb128 is not supported

This is because `-g` defaults to the compiler debug info default. If the
assembler does not support some of the directives used, the above errors
occur. To fix, remove the explicit passing of `-g`.

All the test wants is that stack traces print valid function names, and
debug info is not required for that. (I currently cannot recall why I
added the explicit `-g`.)

Link: https://lkml.kernel.org/r/20230316224705.709984-2-elver@google.com
Fixes: 1fe84fd4a402 ("kcsan: Add test suite")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel: kcsan: kcsan_test: build without structleak plugin

[ Upstream commit 6fcd4267a840d0536b8e5334ad5f31e4105fce85 ]

Building kcsan_test with structleak plugin enabled makes the stack frame
size to grow.

kernel/kcsan/kcsan_test.c:704:1: error: the frame size of 3296 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

Turn off the structleak plugin checks for kcsan_test.

Link: https://lkml.kernel.org/r/20221128104358.2660634-1-anders.roxell@linaro.org
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marco Elver <elver@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Gow <davidgow@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 5eb39cde1e24 ("kcsan: avoid passing -g for test")
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsverity: don't drop pagecache at end of FS_IOC_ENABLE_VERITY

[ Upstream commit a075bacde257f755bea0e53400c9f1cdd1b8e8e6 ]

The full pagecache drop at the end of FS_IOC_ENABLE_VERITY is causing
performance problems and is hindering adoption of fsverity.  It was
intended to solve a race condition where unverified pages might be left
in the pagecache.  But actually it doesn't solve it fully.

Since the incomplete solution for this race condition has too much
performance impact for it to be worth it, let's remove it for now.

Fixes: 3fda4c617e84 ("fs-verity: implement FS_IOC_ENABLE_VERITY ioctl")
Cc: stable@vger.kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Link: https://lore.kernel.org/r/20230314235332.50270-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zonefs: Fix error message in zonefs_file_dio_append()

[ Upstream commit 88b170088ad2c3e27086fe35769aa49f8a512564 ]

Since the expected write location in a sequential file is always at the
end of the file (append write), when an invalid write append location is
detected in zonefs_file_dio_append(), print the invalid written location
instead of the expected write location.

Fixes: a608da3bd730 ("zonefs: Detect append writes at invalid locations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zonefs: Separate zone information from inode information

[ Upstream commit aa7f243f32e1d18036ee00d71d3ccfad70ae2121 ]

In preparation for adding dynamic inode allocation, separate an inode
zone information from the zonefs inode structure. The new data structure
zonefs_zone is introduced to store in memory information about a zone
that must be kept throughout the lifetime of the device mount.

Linking between a zone file inode and its zone information is done by
setting the inode i_private field to point to a struct zonefs_zone.
Using the i_private pointer avoids the need for adding a pointer in
struct zonefs_inode_info. Beside the vfs inode, this structure is
reduced to a mutex and a write open counter.

One struct zonefs_zone is created per file inode on mount. These
structures are organized in an array using the new struct
zonefs_zone_group data structure to represent zone groups. The
zonefs_zone arrays are indexed per file number (the index of a struct
zonefs_zone in its array directly gives the file number/name for that
zone file inode).

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Stable-dep-of: 88b170088ad2 ("zonefs: Fix error message in zonefs_file_dio_append()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

zonefs: Reduce struct zonefs_inode_info size

[ Upstream commit 34422914dc00b291d1c47dbdabe93b154c2f2b25 ]

Instead of using the i_ztype field in struct zonefs_inode_info to
indicate the zone type of an inode, introduce the new inode flag
ZONEFS_ZONE_CNV to be set in the i_flags field of struct
zonefs_inode_info to identify conventional zones. If this flag is not
set, the zone of an inode is considered to be a sequential zone.

The helpers zonefs_zone_is_cnv(), zonefs_zone_is_seq(),
zonefs_inode_is_cnv() and zonefs_inode_is_seq() are introduced to
simplify testing the zone type of a struct zonefs_inode_info and of a
struct inode.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Stable-dep-of: 88b170088ad2 ("zonefs: Fix error message in zonefs_file_dio_append()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

zonefs: Simplify IO error handling

[ Upstream commit 46a9c526eef7fb68a00321e2a9591ce5276ae92b ]

Simplify zonefs_check_zone_condition() by moving the code that changes
an inode access rights to the new function zonefs_inode_update_mode().
Furthermore, since on mount an inode wpoffset is always zero when
zonefs_check_zone_condition() is called during an inode initialization,
the "mount" boolean argument is not necessary for the readonly zone
case. This argument is thus removed.

zonefs_io_error_cb() is also modified to use the inode offline and
zone state flags instead of checking the device zone condition. The
multiple calls to zonefs_check_zone_condition() are reduced to the first
call on entry, which allows removing the "warn" argument.
zonefs_inode_update_mode() is also used to update an inode access rights
as zonefs_io_error_cb() modifies the inode flags depending on the volume
error handling mode (defined with a mount option). Since an inode mode
change differs for read-only zones between mount time and IO error time,
the flag ZONEFS_ZONE_INIT_MODE is used to differentiate both cases.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Stable-dep-of: 88b170088ad2 ("zonefs: Fix error message in zonefs_file_dio_append()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

zonefs: Reorganize code

[ Upstream commit 4008e2a0b01aba982356fd15b128a47bf11bd9c7 ]

Move all code related to zone file operations from super.c to the new
file.c file. Inode and zone management code remains in super.c.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Stable-dep-of: 88b170088ad2 ("zonefs: Fix error message in zonefs_file_dio_append()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: avoid race conditions with parallel reconnects

[ Upstream commit bc962159e8e326af634a506508034a375bf2b858 ]

When multiple processes/channels do reconnects in parallel
we used to return success immediately
negotiate/session-setup/tree-connect, causing race conditions
between processes that enter the function in parallel.
This caused several errors related to session not found to
show up during parallel reconnects.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: prevent data race in cifs_reconnect_tcon()

[ Upstream commit 1bcd548d935a33c6fc58331405eb1b82fd6150de ]

Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in cifs_reconnect_tcon().  It
is set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.

Create a new cifs_wait_for_server_reconnect() helper that can be used
by both SMB2+ and CIFS reconnect code.

Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: update ip_addr for ses only for primary chan setup

[ Upstream commit e77978de4765229e09c8fabcf4f8419ff367317f ]

We update ses->ip_addr whenever we do a session setup.
But this should happen only for primary channel in mchan
scenario.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Sasha Levin <sashal@kernel.org>

thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers

[ Upstream commit f0a57dd33b3eadf540912cd130db727ea824d174 ]

Current Intel USB4 host routers have hardware limitation that the USB3
bandwidth cannot go higher than 16376 Mb/s. Work this around by adding a
new quirk that limits the bandwidth for the affected host routers.

Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.1.22

Link: https://lore.kernel.org/r/20230328142617.205414124@linuxfoundation.org
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Fix the memory overrun

commit 4cc16d64b6cdb179a26fb389cae9dce788e88f5d upstream.

Fix the memory overrun issue caused by wrong array size.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527133 ("Memory - corruptions")
Fixes: c0cc999f3c32e6 ("drm/amdkfd: Fix the warning of array-index-out-of-bounds")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: add GC 11.0.4 KFD support

commit 88c21c2b56aa21dd34290d43ada74033dc3bfe35 upstream.

Add initial support for GC 11.0.4 in KFD compute driver.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: Fix the warning of array-index-out-of-bounds

commit c0cc999f3c32e65a7c88fb323893ddf897b24488 upstream.

For some GPUs with more CUs, the original sibling_map[32]
in struct crat_subtype_cache is not enough
to save the cache information when create the VCRAT table,
so skip filling the struct crat_subtype_cache info instead
fill struct kfd_cache_properties directly to fix this problem.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdkfd: introduce dummy cache info for property asic

commit fd72e2cb2f9dd2734e8013b3e185a21f0d605d3e upstream.

This dummy cache info will enable kfd base function support.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Sanitize vruntime of entity being migrated

commit a53ce18cacb477dd0513c607f187d16f0fa96f71 upstream.

Commit 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed")
fixes an overflowing bug, but ignore a case that se->exec_start is reset
after a migration.

For fixing this case, we delay the reset of se->exec_start after
placing the entity which se->exec_start to detect long sleeping task.

In order to take into account a possible divergence between the clock_task
of 2 rqs, we increase the threshold to around 104 days.

Fixes: 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed")
Originally-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Qiao <zhangqiao22@huawei.com>
Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: sanitize vruntime of entity being placed

commit 829c1651e9c4a6f78398d3e67651cef9bb6b42cc upstream.

When a scheduling entity is placed onto cfs_rq, its vruntime is pulled
to the base level (around cfs_rq->min_vruntime), so that the entity
doesn't gain extra boost when placed backwards.

However, if the entity being placed wasn't executed for a long time, its
vruntime may get too far behind (e.g. while cfs_rq was executing a
low-weight hog), which can inverse the vruntime comparison due to s64
overflow.  This results in the entity being placed with its original
vruntime way forwards, so that it will effectively never get to the cpu.

To prevent that, ignore the vruntime of the entity being placed if it
didn't execute for much longer than the characteristic sheduler time
scale.

[rkagan: formatted, adjusted commit log, comments, cutoff value]
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Co-developed-by: Roman Kagan <rkagan@amazon.de>
Signed-off-by: Roman Kagan <rkagan@amazon.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230130122216.3555094-1-rkagan@amazon.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: avoid accessing uninitialized tasklet

commit d9a02e016aaf5a57fb44e9a5e6da8ccd3b9e2e70 upstream.

When neither "no_read_workqueue" nor "no_write_workqueue" are enabled,
tasklet_trylock() in crypt_dec_pending() may still return false due to
an uninitialized state, and dm-crypt will unnecessarily do io completion
in io_queue workqueue instead of current context.

Fix this by adding an 'in_tasklet' flag to dm_crypt_io struct and
initialize it to false in crypt_io_init(). Set this flag to true in
kcryptd_queue_crypt() before calling tasklet_schedule(). If set
crypt_dec_pending() will punt io completion to a workqueue.

This also nicely avoids the tasklet_trylock/unlock hack when tasklets
aren't in use.

Fixes: 8e14f610159d ("dm crypt: do not call bio_endio() from the dm-crypt tasklet")
Cc: stable@vger.kernel.org
Reported-by: Hou Tao <houtao1@huawei.com>
Suggested-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: add cond_resched() to dmcrypt_write()

commit fb294b1c0ba982144ca467a75e7d01ff26304e2b upstream.

The loop in dmcrypt_write may be running for unbounded amount of time,
thus we need cond_resched() in it.

This commit fixes the following warning:

[ 3391.153255][   C12] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [dmcrypt_write/2:2897]
...
[ 3391.387210][   C12] Call trace:
[ 3391.390338][   C12]  blk_attempt_bio_merge.part.6+0x38/0x158
[ 3391.395970][   C12]  blk_attempt_plug_merge+0xc0/0x1b0
[ 3391.401085][   C12]  blk_mq_submit_bio+0x398/0x550
[ 3391.405856][   C12]  submit_bio_noacct+0x308/0x380
[ 3391.410630][   C12]  dmcrypt_write+0x1e4/0x208 [dm_crypt]
[ 3391.416005][   C12]  kthread+0x130/0x138
[ 3391.419911][   C12]  ret_from_fork+0x10/0x18

Reported-by: yangerkun <yangerkun@huawei.com>
Fixes: dc2676210c42 ("dm crypt: offload writes to thread")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm stats: check for and propagate alloc_percpu failure

commit d3aa3e060c4a80827eb801fc448debc9daa7c46b upstream.

Check alloc_precpu()'s return value and return an error from
dm_stats_init() if it fails. Update alloc_dev() to fail if
dm_stats_init() does.

Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup()
even if dm-stats isn't being actively used.

Fixes: fd2ed4d25270 ("dm: add statistics support")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()

commit 92fbb6d1296f81f41f65effd7f5f8c0f74943d15 upstream.

The data->block[0] variable comes from user and is a number between
0-255. Without proper check, the variable may be very large to cause
an out-of-bounds when performing memcpy in slimpro_i2c_blkwr.

Fix this bug by checking the value of writelen.

Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: imx-weim: fix branch condition evaluates to a garbage value

commit 1adab2922c58e7ff4fa9f0b43695079402cce876 upstream.

If bus type is other than imx50_weim_devtype and have no child devices,
variable 'ret' in function weim_parse_dt() will not be initialized, but
will be used as branch condition and return value. Fix this by
initializing 'ret' with 0.

This was discovered with help of clang-analyzer, but the situation is
quite possible in real life.

Fixes: 52c47b63412b ("bus: imx-weim: improve error handling upon child probe-failure")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/ksm: fix race with VMA iteration and mm_struct teardown

commit 6db504ce55bdbc575723938fc480713c9183f6a2 upstream.

exit_mmap() will tear down the VMAs and maple tree with the mmap_lock held
in write mode.  Ensure that the maple tree is still valid by checking
ksm_test_exit() after taking the mmap_lock in read mode, but before the
for_each_vma() iterator dereferences a destroyed maple tree.

Since the maple tree is destroyed, the flags telling lockdep to check an
external lock has been cleared.  Skip the for_each_vma() iterator to avoid
dereferencing a maple tree without the external lock flag, which would
create a lockdep warning.

Link: https://lkml.kernel.org/r/20230308220310.3119196-1-Liam.Howlett@oracle.com
Fixes: a5f18ba07276 ("mm/ksm: use vma iterators instead of vma linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/lkml/ZAdUUhSbaa6fHS36@xpf.sh.intel.com/
Reported-by: syzbot+2ee18845e89ae76342c5@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=64a3e95957cd3deab99df7cd7b5a9475af92c93e
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <heng.su@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom: llcc: Fix slice configuration values for SC8280XP

commit 77bf4b3ed42e31d29b255fcd6530fb7a1e217e89 upstream.

The slice IDs for CVPFW, CPUSS1 and CPUWHT currently overflow the 32bit
LLCC config registers, which means it is writing beyond the upper limit
of the ATTR0_CFGn and ATTR1_CFGn range of registers. But the most obvious
impact is the fact that the mentioned slices do not get configured at all,
which will result in reduced performance. Fix that by using the slice ID
values taken from the latest LLCC SC table.

Fixes: ec69dfbdc426 ("soc: qcom: llcc: Add sc8180x and sc8280xp configurations")
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306135527.509796-1-abel.vesa@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sm8150: Fix the iommu mask used for PCIe controllers

commit 672a58fc7c477e59981653a11241566870fff852 upstream.

The iommu mask should be 0x3f as per Qualcomm internal documentation.
Without the correct mask, the PCIe transactions from the endpoint will
result in SMMU faults. Hence, fix it!

Cc: stable@vger.kernel.org # 5.19
Fixes: a1c86c680533 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230224080045.6577-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent

commit 8a63441e83724fee1ef3fd37b237d40d90780766 upstream.

If the controller is not marked as cache coherent, then kernel will
try to ensure coherency during dma-ops and that may cause data corruption.
So, mark the PCIe node as dma-coherent as the devices on PCIe bus are
cache coherent.

Cc: stable@vger.kernel.org
Fixes: 92e0ee9f83b3 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related node")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1677584952-17496-1-git-send-email-quic_krichai@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: arm_scmi: Fix device node validation for mailbox transport

commit 2ab4f4018cb6b8010ca5002c3bdc37783b5d28c2 upstream.

When mailboxes are used as a transport it is possible to setup the SCMI
transport layer, depending on the underlying channels configuration, to use
one or two mailboxes, associated, respectively, to one or two, distinct,
shared memory areas: any other combination should be treated as invalid.

Add more strict checking of SCMI mailbox transport device node descriptors.

Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type")
Cc: <stable@vger.kernel.org> # 4.19
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tee: amdtee: fix race condition in amdtee_open_session

commit f8502fba45bd30e1a6a354d9d898bc99d1a11e6d upstream.

There is a potential race condition in amdtee_open_session that may
lead to use-after-free. For instance, in amdtee_open_session() after
sess->sess_mask is set, and before setting:

    sess->session_info[i] = session_info;

if amdtee_close_session() closes this same session, then 'sess' data
structure will be released, causing kernel panic when 'sess' is
accessed within amdtee_open_session().

The solution is to set the bit sess->sess_mask as the last step in
amdtee_open_session().

Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver")
Cc: stable@vger.kernel.org
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: Handle zicsr/zifencei issues between clang and binutils

commit e89c2e815e76471cb507bd95728bf26da7976430 upstream.

There are two related issues that appear in certain combinations with
clang and GNU binutils.

The first occurs when a version of clang that supports zicsr or zifencei
via '-march=' [1] (i.e, >= 17.x) is used in combination with a version
of GNU binutils that do not recognize zicsr and zifencei in the
'-march=' value (i.e., < 2.36):

  riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
  riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/file.o
  riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicsr2p0_zifencei2p0: Invalid or unknown z ISA extension: 'zifencei'
  riscv64-linux-gnu-ld: failed to merge target specific data of file fs/efivarfs/super.o

The second occurs when a version of clang that does not support zicsr or
zifencei via '-march=' (i.e., <= 16.x) is used in combination with a
version of GNU as that defaults to a newer ISA base spec, which requires
specifying zicsr and zifencei in the '-march=' value explicitly (i.e, >=
2.38):

  ../arch/riscv/kernel/kexec_relocate.S: Assembler messages:
  ../arch/riscv/kernel/kexec_relocate.S:147: Error: unrecognized opcode `fence.i', extension `zifencei' required
  clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)

This is the same issue addressed by commit 6df2a016c0c8 ("riscv: fix
build with binutils 2.38") (see [2] for additional information) but
older versions of clang miss out on it because the cc-option check
fails:

  clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'
  clang-12: error: invalid arch name 'rv64imac_zicsr_zifencei', unsupported standard user-level extension 'zicsr'

To resolve the first issue, only attempt to add zicsr and zifencei to
the march string when using the GNU assembler 2.38 or newer, which is
when the default ISA spec was updated, requiring these extensions to be
specified explicitly. LLVM implements an older version of the base
specification for all currently released versions, so these instructions
are available as part of the 'i' extension. If LLVM's implementation is
updated in the future, a CONFIG_AS_IS_LLVM condition can be added to
CONFIG_TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI.

To resolve the second issue, use version 2.2 of the base ISA spec when
using an older version of clang that does not support zicsr or zifencei
via '-march=', as that is the spec version most compatible with the one
clang/LLVM implements and avoids the need to specify zicsr and zifencei
explicitly due to still being a part of 'i'.

[1]: https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16
[2]: https://lore.kernel.org/ZAxT7T9Xy1Fo3d5W@aurel32.net/

Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1808
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230313-riscv-zicsr-zifencei-fiasco-v1-1-dd1b7840a551@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: Fix incorrect ASID argument when flushing TLB

commit 9a801afd3eb95e1a89aba17321062df06fb49d98 upstream.

Currently, we pass the CONTEXTID instead of the ASID to the TLB flush
function. We should only take the ASID field to prevent from touching
the reserved bit field.

Fixes: 3f1e782998cd ("riscv: add ASID-based tlbflushing methods")
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: https://lore.kernel.org/r/20230313034906.2401730-1-dylan@andestech.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: reposition the gpu reset checking for reuse

commit aaee0ce460b954e08b6e630d7e54b2abb672feb8 upstream.

Move the amdgpu_acpi_should_gpu_reset out of
CONFIG_SUSPEND to share it with hibernate case.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: skip ASIC reset for APUs when go to S4

commit b589626674de94d977e81c99bf7905872b991197 upstream.

For GC IP v11.0.4/11, PSP TMR need to be reserved
for ASIC mode2 reset. But for S4, when psp suspend,
it will destroy the TMR that fails the ASIC reset.

[  96.006101] amdgpu 0000:62:00.0: amdgpu: MODE2 reset
[  100.409717] amdgpu 0000:62:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x00000011 SMN_C2PMSG_82:0x00000002
[  100.411593] amdgpu 0000:62:00.0: amdgpu: Mode2 reset failed!
[  100.412470] amdgpu 0000:62:00.0: PM: pci_pm_freeze(): amdgpu_pmops_freeze+0x0/0x50 [amdgpu] returns -62
[  100.414020] amdgpu 0000:62:00.0: PM: dpm_run_callback(): pci_pm_freeze+0x0/0xd0 returns -62
[  100.415311] amdgpu 0000:62:00.0: PM: pci_pm_freeze+0x0/0xd0 returned -62 after 4623202 usecs
[  100.416608] amdgpu 0000:62:00.0: PM: failed to freeze async: error -62

We can skip the reset on APUs, assuming we can resume them
properly. Verified on some GFX11, GFX10 and old GFX9 APUs.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Preserve crtc_state->inherited during state clearing

commit 3a84f2c6c9558c554a90ec26ad25df92fc5e05b7 upstream.

intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.

Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.

Cc: stable@vger.kernel.org
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit 2553bacaf953b48c59357f5a622282bc0c45adae)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/active: Fix missing debug object activation

commit e92eb246feb9019b0b137706c934b8891cdfe3c2 upstream.

debug_active_activate() expected ref->count to be zero
which is not true anymore as __i915_active_activate() calls
debug_active_activate() after incrementing the count.

v2: No need to check for "ref->count == 1" as __i915_active_activate()
already make sure of that(Janusz).

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6733
Fixes: 04240e30ed06 ("drm/i915: Skip taking acquire mutex for no ref->active callback")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313114613.9874-1-nirmoy.das@intel.com
(cherry picked from commit bfad380c542438a9b642f8190b7fd37bc77e2723)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi

commit 2b072442f4962231a8516485012bb2d2551ef2fe upstream.

S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default").

The root cause is still not clear for now.

So extend and apply the ASPM quirk from commit e02fe3bc7aba
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.

Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/meson: fix missing component unbind on bind errors

commit ba98413bf45edbf33672e2539e321b851b2cfbd1 upstream.

Make sure to unbind all subcomponents when binding the aggregate device
fails.

Fixes: a41e82e6c457 ("drm/meson: Add support for components")
Cc: stable@vger.kernel.org # 4.12
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306103533.4915-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk

commit 4c94e57c258cb7800aa5f3a9d9597d91291407a9 upstream.

[Why & How]
When merging commit 9af611f29034
("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming"),
index change was not picked up.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Fixes: 9af611f29034 ("drm/amd/display: Fix DCN32 DPSTREAMCLK_CNTL programming")
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found

commit 1a70ca89d59c7c8af006d29b965a95ede0abb0da upstream.

Returns EPROBE_DEFER when of_drm_find_bridge() fails, this is consistent
with what all the other DRM bridge drivers are doing and this is
required since the bridge might not be there when the driver is probed
and this should not be a fatal failure.

Cc: <stable@vger.kernel.org>
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Matheus Castello <matheus.castello@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230322143821.109744-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()

commit 003587000276f81d0114b5ce773d80c119d8cb30 upstream.

The ioctl helper function nilfs_ioctl_wrap_copy(), which exchanges a
metadata array to/from user space, may copy uninitialized buffer regions
to user space memory for read-only ioctl commands NILFS_IOCTL_GET_SUINFO
and NILFS_IOCTL_GET_CPINFO.

This can occur when the element size of the user space metadata given by
the v_size member of the argument nilfs_argv structure is larger than the
size of the metadata element (nilfs_suinfo structure or nilfs_cpinfo
structure) on the file system side.

KMSAN-enabled kernels detect this issue as follows:

 BUG: KMSAN: kernel-infoleak in instrument_copy_to_user
 include/linux/instrumented.h:121 [inline]
 BUG: KMSAN: kernel-infoleak in _copy_to_user+0xc0/0x100 lib/usercopy.c:33
  instrument_copy_to_user include/linux/instrumented.h:121 [inline]
  _copy_to_user+0xc0/0x100 lib/usercopy.c:33
  copy_to_user include/linux/uaccess.h:169 [inline]
  nilfs_ioctl_wrap_copy+0x6fa/0xc10 fs/nilfs2/ioctl.c:99
  nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline]
  nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290
  nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343
  __do_compat_sys_ioctl fs/ioctl.c:968 [inline]
  __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910
  __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910
  do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
  __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
  do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
  do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
  entry_SYSENTER_compat_after_hwframe+0x70/0x82

 Uninit was created at:
  __alloc_pages+0x9f6/0xe90 mm/page_alloc.c:5572
  alloc_pages+0xab0/0xd80 mm/mempolicy.c:2287
  __get_free_pages+0x34/0xc0 mm/page_alloc.c:5599
  nilfs_ioctl_wrap_copy+0x223/0xc10 fs/nilfs2/ioctl.c:74
  nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline]
  nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290
  nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343
  __do_compat_sys_ioctl fs/ioctl.c:968 [inline]
  __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910
  __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910
  do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
  __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
  do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
  do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
  entry_SYSENTER_compat_after_hwframe+0x70/0x82

 Bytes 16-127 of 3968 are uninitialized
 ...

This eliminates the leak issue by initializing the page allocated as
buffer using get_zeroed_page().

Link: https://lkml.kernel.org/r/20230307085548.6290-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+132fdd2f1e1805fdc591@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/000000000000a5bd2d05f63f04ae@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: fix qos on mesh interfaces

commit 4e348c6c6e23491ae6eb5e077848a42d0562339c upstream.

When ieee80211_select_queue is called for mesh, the sta pointer is usually
NULL, since the nexthop is looked up much later in the tx path.
Explicitly check for unicast address in that case in order to make qos work
again.

Cc: stable@vger.kernel.org
Fixes: 50e2ab392919 ("wifi: mac80211: fix queue selection for mesh/OCB interfaces")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230314095956.62085-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: return unsupported error on smb1 mount

commit 39b291b86b5988bf8753c3874d5c773399d09b96 upstream.

ksmbd disconnect connection when mounting with vers=smb1.
ksmbd should send smb1 negotiate response to client for correct
unsupported error return. This patch add needed SMB1 macros and fill
NegProt part of the response for smb1 negotiate response.

Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: return STATUS_NOT_SUPPORTED on unsupported smb2.0 dialect

commit b53e8cfec30b93c120623232ba27c041b1ef8f1a upstream.

ksmbd returned "Input/output error" when mounting with vers=2.0 to
ksmbd. It should return STATUS_NOT_SUPPORTED on unsupported smb2.0
dialect.

Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: don't terminate inactive sessions after a few seconds

commit be6f42fad5f5fd1fea9d562df82c38ad6ed3bfe9 upstream.

Steve reported that inactive sessions are terminated after a few
seconds. ksmbd terminate when receiving -EAGAIN error from
kernel_recvmsg(). -EAGAIN means there is no data available in timeout.
So ksmbd should keep connection with unlimited retries instead of
terminating inactive sessions.

Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: set FILE_NAMED_STREAMS attribute in FS_ATTRIBUTE_INFORMATION

commit 728f14c72b71a19623df329c1c7c9d1452e56f1e upstream.

If vfs objects = streams_xattr in ksmbd.conf FILE_NAMED_STREAMS should
be set to Attributes in FS_ATTRIBUTE_INFORMATION. MacOS client show
"Format: SMB (Unknown)" on faked NTFS and no streams support.

Cc: stable@vger.kernel.org
Reported-by: Miao Lihua <441884205@qq.com>
Tested-by: Miao Lihua <441884205@qq.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix wrong signingkey creation when encryption is AES256

commit 7a891d4b62d62566323676cb0e922ded4f37afe1 upstream.

MacOS and Win11 support AES256 encrytion and it is included in the cipher
array of encryption context. Especially on macOS, The most preferred
cipher is AES256. Connecting to ksmbd fails on newer MacOS clients that
support AES256 encryption. MacOS send disconnect request after receiving
final session setup response from ksmbd. Because final session setup is
signed with signing key was generated incorrectly.
For signging key, 'L' value should be initialized to 128 if key size is
16bytes.

Cc: stable@vger.kernel.org
Reported-by: Miao Lihua <441884205@qq.com>
Tested-by: Miao Lihua <441884205@qq.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix mas_skip_node() end slot detection

commit 0fa99fdfe1b38da396d0b2d1496a823bcd0ebea0 upstream.

Patch series "Fix mas_skip_node() for mas_empty_area()", v2.

mas_empty_area() was incorrectly returning an error when there was room.
The issue was tracked down to mas_skip_node() using the incorrect
end-of-slot count.  Instead of using the nodes hard limit, the limit of
data should be used.

mas_skip_node() was also setting the min and max to that of the child
node, which was unnecessary.  Within these limits being set, there was
also a bug that corrupted the maple state's max if the offset was set to
the maximum node pivot.  The bug was without consequence unless there was
a sufficient gap in the next child node which would cause an error to be
returned.

This patch set fixes these errors by removing the limit setting from
mas_skip_node() and uses the mas_data_end() for slot limits, and adds
tests for all failures discovered.

This patch (of 2):

mas_skip_node() is used to move the maple state to the node with a higher
limit.  It does this by walking up the tree and increasing the slot count.
Since slot count may not be able to be increased, it may need to walk up
multiple times to find room to walk right to a higher limit node.  The
limit of slots that was being used was the node limit and not the last
location of data in the node.  This would cause the maple state to be
shifted outside actual data and enter an error state, thus returning
-EBUSY.

The result of the incorrect error state means that mas_awalk() would
return an error instead of finding the allocation space.

The fix is to use mas_data_end() in mas_skip_node() to detect the nodes
data end point and continue walking the tree up until it is safe to move
to a node with a higher limit.

The walk up the tree also sets the maple state limits so remove the buggy
code from mas_skip_node().  Setting the limits had the unfortunate side
effect of triggering another bug if the parent node was full and the there
was no suitable gap in the second last child, but room in the next child.

mas_skip_node() may also be passed a maple state in an error state from
mas_anode_descend() when no allocations are available.  Return on such an
error state immediately.

Link: https://lkml.kernel.org/r/20230307180247.2220303-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230307180247.2220303-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Snild Dolkow <snild@sony.com>
Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Tested-by: Snild Dolkow <snild@sony.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

test_maple_tree: add more testing for mas_empty_area()

commit 4bd6dded6318dc8e2514d74868c1f8fb38b61a60 upstream.

Test robust filling of an entire area of the tree, then test one beyond.
This is to test the walking back up the tree at the end of nodes and error
condition.  Test inspired by the reproducer code provided by Snild Dolkow.

The last test in the function tests for the case of a corrupted maple
state caused by the incorrect limits set during mas_skip_node().  There
needs to be a gap in the second last child and last child, but the search
must rule out the second last child's gap.  This would avoid correcting
the maple state to the correct max limit and return an error.

Link: https://lkml.kernel.org/r/20230307180247.2220303-3-Liam.Howlett@oracle.com
Cc: Snild Dolkow <snild@sony.com>
Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Fixes: e15e06a83923 ("lib/test_maple_tree: add testing for maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "kasan: drop skip_kasan_poison variable in free_pages_prepare"

commit f446883d12b8bfa486f7c98d403054d61d38c989 upstream.

This reverts commit 487a32ec24be819e747af8c2ab0d5c515508086a.

should_skip_kasan_poison() reads the PG_skip_kasan_poison flag from
page->flags.  However, this line of code in free_pages_prepare():

page->flags &= ~PAGE_FLAGS_CHECK_AT_PREP;

clears most of page->flags, including PG_skip_kasan_poison, before calling
should_skip_kasan_poison(), which meant that it would never return true as
a result of the page flag being set.  Therefore, fix the code to call
should_skip_kasan_poison() before clearing the flags, as we were doing
before the reverted patch.

This fixes a measurable performance regression introduced in the reverted
commit, where munmap() takes longer than intended if HW tags KASAN is
supported and enabled at runtime.  Without this patch, we see a
single-digit percentage performance regression in a particular
mmap()-heavy benchmark when enabling HW tags KASAN, and with the patch,
there is no statistically significant performance impact when enabling HW
tags KASAN.

Link: https://lkml.kernel.org/r/20230310042914.3805818-2-pcc@google.com
Fixes: 487a32ec24be ("kasan: drop skip_kasan_poison variable in free_pages_prepare")
Link: https://linux-review.googlesource.com/id/Ic4f13affeebd20548758438bb9ed9ca40e312b79
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.1]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/rsrc: fix null-ptr-deref in io_file_bitmap_get()

commit 02a4d923e4400a36d340ea12d8058f69ebf3a383 upstream.

When fixed files are unregistered, file_alloc_end and alloc_hint
are not cleared. This can later cause a NULL pointer dereference in
io_file_bitmap_get() if auto index selection is enabled via
IORING_FILE_INDEX_ALLOC:

[    6.519129] BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
[    6.541468] RIP: 0010:_find_next_zero_bit+0x1a/0x70
[...]
[    6.560906] Call Trace:
[    6.561322]  <TASK>
[    6.561672]  io_file_bitmap_get+0x38/0x60
[    6.562281]  io_fixed_fd_install+0x63/0xb0
[    6.562851]  ? __pfx_io_socket+0x10/0x10
[    6.563396]  io_socket+0x93/0xf0
[    6.563855]  ? __pfx_io_socket+0x10/0x10
[    6.564411]  io_issue_sqe+0x5b/0x3d0
[    6.564914]  io_submit_sqes+0x1de/0x650
[    6.565452]  __do_sys_io_uring_enter+0x4fc/0xb20
[    6.566083]  ? __do_sys_io_uring_register+0x11e/0xd80
[    6.566779]  do_syscall_64+0x3c/0x90
[    6.567247]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[...]

To fix the issue, set file alloc range and alloc_hint to zero after
file tables are freed.

Cc: stable@vger.kernel.org
Fixes: 4278a0deb1f6 ("io_uring: defer alloc_hint update to io_file_bitmap_set()")
Signed-off-by: Savino Dicanosa <sd7.dev@pm.me>
[axboe: add explicit bitmap == NULL check as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/net: avoid sending -ECONNABORTED on repeated connection requests

commit 74e2e17ee1f8d8a0928b90434ad7e2df70f8483e upstream.

Since io_uring does nonblocking connect requests, if we do two repeated
ones without having a listener, the second will get -ECONNABORTED rather
than the expected -ECONNREFUSED. Treat -ECONNABORTED like a normal retry
condition if we're nonblocking, if we haven't already seen it.

Cc: stable@vger.kernel.org
Fixes: 3fb1bd688172 ("io_uring/net: handle -EINPROGRESS correct for IORING_OP_CONNECT")
Link: https://github.com/axboe/liburing/issues/828
Reported-by: Hui, Chunyang <sanqian.hcy@antgroup.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kfence: avoid passing -g for test

commit 2e08ca1802441224f5b7cc6bffbb687f7406de95 upstream.

Nathan reported that when building with GNU as and a version of clang that
defaults to DWARF5:

  $ make -skj"$(nproc)" ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
LLVM=1 LLVM_IAS=0 O=build \
mrproper allmodconfig mm/kfence/kfence_test.o
  /tmp/kfence_test-08a0a0.s: Assembler messages:
  /tmp/kfence_test-08a0a0.s:14627: Error: non-constant .uleb128 is not supported
  /tmp/kfence_test-08a0a0.s:14628: Error: non-constant .uleb128 is not supported
  /tmp/kfence_test-08a0a0.s:14632: Error: non-constant .uleb128 is not supported
  /tmp/kfence_test-08a0a0.s:14633: Error: non-constant .uleb128 is not supported
  /tmp/kfence_test-08a0a0.s:14639: Error: non-constant .uleb128 is not supported
  ...

This is because `-g` defaults to the compiler debug info default.  If the
assembler does not support some of the directives used, the above errors
occur.  To fix, remove the explicit passing of `-g`.

All the test wants is that stack traces print valid function names, and
debug info is not required for that.  (I currently cannot recall why I
added the explicit `-g`.)

Link: https://lkml.kernel.org/r/20230316224705.709984-1-elver@google.com
Fixes: bc8fbc5f305a ("kfence: add test suite")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: kfence: fix using kfence_metadata without initialization in show_object()

commit 1c86a188e03156223a34d09ce290b49bd4dd0403 upstream.

The variable kfence_metadata is initialized in kfence_init_pool(), then,
it is not initialized if kfence is disabled after booting.  In this case,
kfence_metadata will be used (e.g.  ->lock and ->state fields) without
initialization when reading /sys/kernel/debug/kfence/objects.  There will
be a warning if you enable CONFIG_DEBUG_SPINLOCK.  Fix it by creating
debugfs files when necessary.

Link: https://lkml.kernel.org/r/20230315034441.44321-1-songmuchun@bytedance.com
Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ucsi_acpi: Increase the command completion timeout

commit 02d210f434249a7edbc160969b75df030dc6934d upstream.

Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command
completion timeout value") increased the timeout from 5 seconds
to 60 seconds due to issues related to alternate mode discovery.

After the alternate mode discovery switch to polled mode
the timeout was reduced, but instead of being set back to
5 seconds it was reduced to 1 second.

This is causing problems when using a Lenovo ThinkPad X1 yoga gen7
connected over Type-C to a LG 27UL850-W (charging DP over Type-C).

When the monitor is already connected at boot the following error
is logged: "PPM init failed (-110)", /sys/class/typec is empty and
on unplugging the NULL pointer deref fixed earlier in this series
happens.

When the monitor is connected after boot the following error
is logged instead: "GET_CONNECTOR_STATUS failed (-110)".

Setting the timeout back to 5 seconds fixes both cases.

Fixes: e08065069fc7 ("usb: typec: ucsi: acpi: Reduce the command completion timeout")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230308154244.722337-4-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: ucsi: Fix NULL pointer deref in ucsi_connector_change()

commit f87fb985452ab2083967103ac00bfd68fb182764 upstream.

When ucsi_init() fails, ucsi->connector is NULL, yet in case of
ucsi_acpi we may still get events which cause the ucs_acpi code to call
ucsi_connector_change(), which then derefs the NULL ucsi->connector
pointer.

Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init()
has succeeded, so that ucsi_connector_change() ignores the events
because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask.

Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217106
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230308154244.722337-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Add 1ms delay after end transfer command without IOC

commit d8a2bb4eb75866275b5cf7de2e593ac3449643e2 upstream.

Previously, there was a 100uS delay inserted after issuing an end transfer
command for specific controller revisions.  This was due to the fact that
there was a GUCTL2 bit field which enabled synchronous completion of the
end transfer command once the CMDACT bit was cleared in the DEPCMD
register.  Since this bit does not exist for all controller revisions and
the current implementation heavily relies on utizling the EndTransfer
command completion interrupt, add the delay back in for uses where the
interrupt on completion bit is not set, and increase the duration to 1ms
for the controller to complete the command.

An issue was seen where the USB request buffer was unmapped while the DWC3
controller was still accessing the TRB.  However, it was confirmed that the
end transfer command was successfully submitted. (no end transfer timeout)
In situations, such as dwc3_gadget_soft_disconnect() and
__dwc3_gadget_ep_disable(), the dwc3_remove_request() is utilized, which
will issue the end transfer command, and follow up with
dwc3_gadget_giveback().  At least for the USB ep disable path, it is
required for any pending and started requests to be completed and returned
to the function driver in the same context of the disable call.  Without
the GUCTL2 bit, it is not ensured that the end transfer is completed before
the buffers are unmapped.

Fixes: cf2f8b63f7f1 ("usb: dwc3: gadget: Remove END_TRANSFER delay")
Cc: stable <stable@kernel.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230306200557.29387-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipidea: core: fix possible concurrent when switch role

commit 451b15ed138ec15bffbebb58a00ebdd884c3e659 upstream.

The user may call role_store() when driver is handling
ci_handle_id_switch() which is triggerred by otg event or power lost
event. Unfortunately, the controller may go into chaos in this case.
Fix this by protecting it with mutex lock.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: chipdea: core: fix return -EINVAL if request role is the same with current role

commit 3670de80678961eda7fa2220883fc77c16868951 upstream.

It should not return -EINVAL if the request role is the same with current
role, return non-error and without do anything instead.

Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver

commit 96b96b2a567fb34dd41c87e6cf01f6902ce8cae4 upstream.

Patch changes CDNS_DEVICE_ID in USBSSP PCI Glue driver to remove
the conflict with Cadence USBSS driver.

cc: <stable@vger.kernel.org>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20230309063048.299378-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdnsp: Fixes issue with redundant Status Stage

commit 5bc38d33a5a1209fd4de65101d1ae8255ea12c6e upstream.

In some cases, driver trees to send Status Stage twice.
The first one from upper layer of gadget usb subsystem and
second time from controller driver.
This patch fixes this issue and remove tricky handling of
SET_INTERFACE from controller driver which is no longer
needed.

cc: <stable@vger.kernel.org>
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20230307111420.376056-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: Fix issue with using incorrect PCI device function

commit 1272fd652a226ccb34e9f47371b6121948048438 upstream.

PCI based platform can have more than two PCI functions.
USBSS PCI Glue driver during initialization should
consider only DRD/HOST/DEVICE PCI functions and
all other should be ignored. This patch adds additional
condition which causes that only DRD and HOST/DEVICE
function will be accepted.

cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20230308124427.311245-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: fix warning when handle discover_identity message

commit abfc4fa28f0160df61c7149567da4f6494dfb488 upstream.

Since both source and sink device can send discover_identity message in
PD3, kernel may dump below warning:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 169 at drivers/usb/typec/tcpm/tcpm.c:1446 tcpm_queue_vdm+0xe0/0xf0
Modules linked in:
CPU: 0 PID: 169 Comm: 1-0050 Not tainted 6.1.1-00038-g6a3c36cf1da2-dirty #567
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tcpm_queue_vdm+0xe0/0xf0
lr : tcpm_queue_vdm+0x2c/0xf0
sp : ffff80000c19bcd0
x29: ffff80000c19bcd0 x28: 0000000000000001 x27: ffff0000d11c8ab8
x26: ffff0000d11cc000 x25: 0000000000000000 x24: 00000000ff008081
x23: 0000000000000001 x22: 00000000ff00a081 x21: ffff80000c19bdbc
x20: 0000000000000000 x19: ffff0000d11c8080 x18: ffffffffffffffff
x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000d716f580
x14: 0000000000000001 x13: ffff0000d716f507 x12: 0000000000000001
x11: 0000000000000000 x10: 0000000000000020 x9 : 00000000000ee098
x8 : 00000000ffffffff x7 : 000000000000001c x6 : ffff0000d716f580
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff80000c19bdbc x1 : 00000000ff00a081 x0 : 0000000000000004
Call trace:
tcpm_queue_vdm+0xe0/0xf0
tcpm_pd_rx_handler+0x340/0x1ab0
kthread_worker_fn+0xcc/0x18c
kthread+0x10c/0x110
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---

Below sequences may trigger this warning:

tcpm_send_discover_work(work)
  tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0);
   tcpm_queue_vdm(port, header, data, count);
    port->vdm_state = VDM_STATE_READY;

vdm_state_machine_work(work);
<-- received discover_identity from partner
 vdm_run_state_machine(port);
  port->vdm_state = VDM_STATE_SEND_MESSAGE;
   mod_vdm_delayed_work(port, x);

tcpm_pd_rx_handler(work);
 tcpm_pd_data_request(port, msg);
  tcpm_handle_vdm_request(port, msg->payload, cnt);
   tcpm_queue_vdm(port, response[0], &response[1], rlen - 1);
--> WARN_ON(port->vdm_state > VDM_STATE_DONE);

For this case, the state machine could still send out discover
identity message later if we skip current discover_identity message.
So we should handle the received message firstly and override the pending
discover_identity message without warning in this case. Then, a delayed
send_discover work will send discover_identity message again.

Fixes: e00943e91678 ("usb: typec: tcpm: PD3.0 sinks can send Discover Identity even in device mode")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230216031515.4151117-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: fix create duplicate source-capabilities file

commit a826492fc9dfe32afd70fff93955ae8174bbf14b upstream.

The kernel will dump in the below cases:
sysfs: cannot create duplicate filename
'/devices/virtual/usb_power_delivery/pd1/source-capabilities'

1. After soft reset has completed, an Explicit Contract negotiation occurs.
The sink device will receive source capabilitys again. This will cause
a duplicate source-capabilities file be created.
2. Power swap twice on a device that is initailly sink role.

This will unregister existing capabilities when above cases occurs.

Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230215054951.238394-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: fix deadlock when swapping to thin device

commit 9bbf5feecc7eab2c370496c1c161bbfe62084028 upstream.

This is an already known issue that dm-thin volume cannot be used as
swap, otherwise a deadlock may happen when dm-thin internal memory
demand triggers swap I/O on the dm-thin volume itself.

But thanks to commit a666e5c05e7c ("dm: fix deadlock when swapping to
encrypted device"), the limit_swap_bios target flag can also be used
for dm-thin to avoid the recursive I/O when it is used as swap.

Fix is to simply set ti->limit_swap_bios to true in both pool_ctr()
and thin_ctr().

In my test, I create a dm-thin volume /dev/vg/swap and use it as swap
device. Then I run fio on another dm-thin volume /dev/vg/main and use
large --blocksize to trigger swap I/O onto /dev/vg/swap.

The following fio command line is used in my test,
  fio --name recursive-swap-io --lockmem 1 --iodepth 128 \
     --ioengine libaio --filename /dev/vg/main --rw randrw \
    --blocksize 1M --numjobs 32 --time_based --runtime=12h

Without this fix, the whole system can be locked up within 15 seconds.

With this fix, there is no any deadlock or hung task observed after
2 hours of running fio.

Furthermore, if blocksize is changed from 1M to 128M, after around 30
seconds fio has no visible I/O, and the out-of-memory killer message
shows up in kernel message. After around 20 minutes all fio processes
are killed and the whole system is back to being alive.

This is exactly what is expected when recursive I/O happens on dm-thin
volume when it is used as swap.

Depends-on: a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device")
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

igb: revert rtnl_lock() that causes deadlock

commit 65f69851e44d71248b952a687e44759a7abb5016 upstream.

The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds
rtnl_lock to eliminate a false data race shown below

 (FREE from device detaching)      |   (USE from netdev core)
igb_remove                         |  igb_ndo_get_vf_config
 igb_disable_sriov                 |  vf >= adapter->vfs_allocated_count?
  kfree(adapter->vf_data)          |
  adapter->vfs_allocated_count = 0 |
                                   |    memcpy(... adapter->vf_data[vf]

The above race will never happen and the extra rtnl_lock causes deadlock
below

[  141.420169]  <TASK>
[  141.420672]  __schedule+0x2dd/0x840
[  141.421427]  schedule+0x50/0xc0
[  141.422041]  schedule_preempt_disabled+0x11/0x20
[  141.422678]  __mutex_lock.isra.13+0x431/0x6b0
[  141.423324]  unregister_netdev+0xe/0x20
[  141.423578]  igbvf_remove+0x45/0xe0 [igbvf]
[  141.423791]  pci_device_remove+0x36/0xb0
[  141.423990]  device_release_driver_internal+0xc1/0x160
[  141.424270]  pci_stop_bus_device+0x6d/0x90
[  141.424507]  pci_stop_and_remove_bus_device+0xe/0x20
[  141.424789]  pci_iov_remove_virtfn+0xba/0x120
[  141.425452]  sriov_disable+0x2f/0xf0
[  141.425679]  igb_disable_sriov+0x4e/0x100 [igb]
[  141.426353]  igb_remove+0xa0/0x130 [igb]
[  141.426599]  pci_device_remove+0x36/0xb0
[  141.426796]  device_release_driver_internal+0xc1/0x160
[  141.427060]  driver_detach+0x44/0x90
[  141.427253]  bus_remove_driver+0x55/0xe0
[  141.427477]  pci_unregister_driver+0x2a/0xa0
[  141.428296]  __x64_sys_delete_module+0x141/0x2b0
[  141.429126]  ? mntput_no_expire+0x4a/0x240
[  141.429363]  ? syscall_trace_enter.isra.19+0x126/0x1a0
[  141.429653]  do_syscall_64+0x5b/0x80
[  141.429847]  ? exit_to_user_mode_prepare+0x14d/0x1c0
[  141.430109]  ? syscall_exit_to_user_mode+0x12/0x30
[  141.430849]  ? do_syscall_64+0x67/0x80
[  141.431083]  ? syscall_exit_to_user_mode_prepare+0x183/0x1b0
[  141.431770]  ? syscall_exit_to_user_mode+0x12/0x30
[  141.432482]  ? do_syscall_64+0x67/0x80
[  141.432714]  ? exc_page_fault+0x64/0x140
[  141.432911]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Since the igb_disable_sriov() will call pci_disable_sriov() before
releasing any resources, the netdev core will synchronize the cleanup to
avoid any races. This patch removes the useless rtnl_(un)lock to guarantee
correctness.

CC: stable@vger.kernel.org
Fixes: 6faee3d4ee8b ("igb: Add lock to avoid data race")
Reported-by: Corinna Vinschen <vinschen@redhat.com>
Link: https://lore.kernel.org/intel-wired-lan/ZAcJvkEPqWeJHO2r@calimero.vinschen.de/
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name

commit 32f86da7c86b27ebed31c24453a0713f612e43fb upstream.

The WM8960 Linux driver expects the clock to be named "mclk".  Otherwise
the clock will be ignored and not prepared/enabled by the driver.

Fixes: 40ba2eda0a7b ("arm64: dts: imx8mm-nitrogen-r2: add audio")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lockd: set file_lock start and end when decoding nlm4 testargs

commit 7ff84910c66c9144cc0de9d9deed9fb84c03aff0 upstream.

Commit 6930bcbfb6ce dropped the setting of the file_lock range when
decoding a nlm_lock off the wire. This causes the client side grant
callback to miss matching blocks and reject the lock, only to rerequest
it 30s later.

Add a helper function to set the file_lock range from the start and end
values that the protocol uses, and have the nlm_lock decoder call that to
set up the file_lock args properly.

Fixes: 6930bcbfb6ce ("lockd: detect and reject lock arguments that overflow")
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org #6.0
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsverity: Remove WQ_UNBOUND from fsverity read workqueue

commit f959325e6ac3f499450088b8d9c626d1177be160 upstream.

WQ_UNBOUND causes significant scheduler latency on ARM64/Android.  This
is problematic for latency sensitive workloads, like I/O
post-processing.

Removing WQ_UNBOUND gives a 96% reduction in fsverity workqueue related
scheduler latency and improves app cold startup times by ~30ms.
WQ_UNBOUND was also removed from the dm-verity workqueue for the same
reason [1].

This code was tested by running Android app startup benchmarks and
measuring how long the fsverity workqueue spent in the runnable state.

Before
Total workqueue scheduler latency: 553800us
After
Total workqueue scheduler latency: 18962us

[1]: https://lore.kernel.org/all/20230202012348.885402-1-nhuck@google.com/

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Fixes: 8a1d0f9cacc9 ("fs-verity: add data verification hooks for ->readpages()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230310193325.620493-1-nhuck@google.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypt: destroy keyring after security_sb_delete()

commit ccb820dc7d2236b1af0d54ae038a27b5b6d5ae5a upstream.

fscrypt_destroy_keyring() must be called after all potentially-encrypted
inodes were evicted; otherwise it cannot safely destroy the keyring.
Since inodes that are in-use by the Landlock LSM don't get evicted until
security_sb_delete(), this means that fscrypt_destroy_keyring() must be
called *after* security_sb_delete().

This fixes a WARN_ON followed by a NULL dereference, only possible if
Landlock was being used on encrypted files.

Fixes: d7e7b9af104c ("fscrypt: stop using keyrings subsystem for fscrypt_master_key")
Cc: stable@vger.kernel.org
Reported-by: syzbot+93e495f6a4f748827c88@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/00000000000044651705f6ca1e30@google.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230313221231.272498-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/slab: Fix undefined init_cache_node_node() for NUMA and !SMP

commit 66a1c22b709178e7b823d44465d0c2e5ed7492fb upstream.

sh/migor_defconfig:

    mm/slab.c: In function ‘slab_memory_callback’:
    mm/slab.c:1127:23: error: implicit declaration of function ‘init_cache_node_node’; did you mean ‘drain_cache_node_node’? [-Werror=implicit-function-declaration]
     1127 |                 ret = init_cache_node_node(nid);
  |                       ^~~~~~~~~~~~~~~~~~~~
  |                       drain_cache_node_node

The #ifdef condition protecting the definition of init_cache_node_node()
no longer matches the conditions protecting the (multiple) users.

Fix this by syncing the conditions.

Fixes: 76af6a054da40553 ("mm/migrate: add CPU hotplug to demotion #ifdef")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/b5bdea22-ed2f-3187-6efe-0c72330270a4@infradead.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: sysfb_efi: Fix DMI quirks not working for simpledrm

commit 3615c78673c332b69aaacefbcde5937c5c706686 upstream.

Commit 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") moved the sysfb_apply_efi_quirks() call in sysfb_init()
from before the [sysfb_]parse_mode() call to after it.
But sysfb_apply_efi_quirks() modifies the global screen_info struct which
[sysfb_]parse_mode() parses, so doing it later is too late.

This has broken all DMI based quirks for correcting wrong firmware efifb
settings when simpledrm is used.

To fix this move the sysfb_apply_efi_quirks() call back to its old place
and split the new setup of the efifb_fwnode (which requires
the platform_device) into its own function and call that at
the place of the moved sysfb_apply_efi_quirks(pd) calls.

Fixes: 8633ef82f101 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Cc: stable@vger.kernel.org
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix race condition in hci_cmd_sync_clear

commit 1c66bee492a5fe00ae3fe890bb693bfc99f994c6 upstream.

There is a potential race condition in hci_cmd_sync_work and
hci_cmd_sync_clear, and could lead to use-after-free. For instance,
hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync
The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and
causing kernel panic when it is used in 'hci_cmd_sync_work'.

Here's the call trace:

dump_stack_lvl+0x49/0x63
print_report.cold+0x5e/0x5d3
? hci_cmd_sync_work+0x282/0x320
kasan_report+0xaa/0x120
? hci_cmd_sync_work+0x282/0x320
__asan_report_load8_noabort+0x14/0x20
hci_cmd_sync_work+0x282/0x320
process_one_work+0x77b/0x11c0
? _raw_spin_lock_irq+0x8e/0xf0
worker_thread+0x544/0x1180
? poll_idle+0x1e0/0x1e0
kthread+0x285/0x320
? process_one_work+0x11c0/0x11c0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>

Allocated by task 266:
kasan_save_stack+0x26/0x50
__kasan_kmalloc+0xae/0xe0
kmem_cache_alloc_trace+0x191/0x350
hci_cmd_sync_queue+0x97/0x2b0
hci_update_passive_scan+0x176/0x1d0
le_conn_complete_evt+0x1b5/0x1a00
hci_le_conn_complete_evt+0x234/0x340
hci_le_meta_evt+0x231/0x4e0
hci_event_packet+0x4c5/0xf00
hci_rx_work+0x37d/0x880
process_one_work+0x77b/0x11c0
worker_thread+0x544/0x1180
kthread+0x285/0x320
ret_from_fork+0x22/0x30

Freed by task 269:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_set_free_info+0x24/0x40
____kasan_slab_free+0x176/0x1c0
__kasan_slab_free+0x12/0x20
slab_free_freelist_hook+0x95/0x1a0
kfree+0xba/0x2f0
hci_cmd_sync_clear+0x14c/0x210
hci_unregister_dev+0xff/0x440
vhci_release+0x7b/0xf0
__fput+0x1f3/0x970
____fput+0xe/0x20
task_work_run+0xd4/0x160
do_exit+0x8b0/0x22a0
do_group_exit+0xba/0x2a0
get_signal+0x1e4a/0x25b0
arch_do_signal_or_restart+0x93/0x1f80
exit_to_user_mode_prepare+0xf5/0x1a0
syscall_exit_to_user_mode+0x26/0x50
ret_from_fork+0x15/0x30

Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: fix btrfs_can_activate_zone() to support DUP profile

commit 9e1cdf0c354e46e428c0e0cab008abbe81b6013d upstream.

btrfs_can_activate_zone() returns true if at least one device has one zone
available for activation. This is OK for the single profile, but not OK for
DUP profile. We need two zones to create a DUP block group. Fix it by
properly handling the case with the profile flags.

Fixes: 265f7237dd25 ("btrfs: zoned: allow DUP on meta-data block groups")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: don't let userspace block driver unbind

commit 6c67ed9ad9b83e453e808f9b31a931a20a25629b upstream.

In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free()
via g_audio_cleanup() will disconnect the card and then wait for all
resources to be released, which happens when the refcount falls to zero.
Since userspace can keep the refcount incremented by not closing the
relevant file descriptor, the call to unbind may block indefinitely.
This can cause a deadlock during reboot, as evidenced by the following
blocked task observed on my machine:

  task:reboot  state:D stack:0   pid:2827  ppid:569    flags:0x0000000c
  Call trace:
   __switch_to+0xc8/0x140
   __schedule+0x2f0/0x7c0
   schedule+0x60/0xd0
   schedule_timeout+0x180/0x1d4
   wait_for_completion+0x78/0x180
   snd_card_free+0x90/0xa0
   g_audio_cleanup+0x2c/0x64
   afunc_unbind+0x28/0x60
   ...
   kernel_restart+0x4c/0xac
   __do_sys_reboot+0xcc/0x1ec
   __arm64_sys_reboot+0x28/0x30
   invoke_syscall+0x4c/0x110
   ...

The issue can also be observed by opening the card with arecord and
then stopping the process through the shell before unbinding:

  # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
  Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo
  ^Z[1]+  Stopped                    arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null
  # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind
  (observe that the unbind command never finishes)

Fix the problem by using snd_card_free_when_closed() instead, which will
still disconnect the card as desired, but defer the task of freeing the
resources to the core once userspace closes its file descriptor.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Reviewed-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20230302163648.3349669-1-alvin@pqrs.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>