Carlos Garnacho [Tue, 21 Aug 2018 09:51:09 +0000 (11:51 +0200)]
quirks: Add quirks for Acer Switch Alpha 12
This is a 2-in-1 laptop with detachable keyboard. The AT keyboard
device is used for tablet-integrated keys (volume, leftmeta) and
should not get disabled with tablet-mode enabled.
The touchpad integrated in the detachable keyboard is already
handled through the "Acer Hawaii Keyboard" chicony rule.
Related: https://gitlab.freedesktop.org/libinput/libinput/issues/115
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Atri Bhattacharya [Tue, 21 Aug 2018 01:35:00 +0000 (03:35 +0200)]
Lenovo MIIX 720 quirk: MatchBus should be usb.
Fixes commit
0d62c8fb.
Atri Bhattacharya [Tue, 21 Aug 2018 00:45:26 +0000 (02:45 +0200)]
Add quirks for Lenovo MIIX 720.
* Lenovo MIIX 720 is a tablet with a detachable keyboard. To keep
the volume rockers on the tablet enabled even when the keyboard
is detached, add `ModelTabletModeNoSuspend=1` to the internal
keyboard.
* The external keyboard is a keyboard-touchpad combo. Assign
`AttrTPKComboLayout=below` to the touchpad to allow features
like disable-while-typing and palm-detection.
Peter Hutterer [Mon, 20 Aug 2018 08:08:31 +0000 (18:08 +1000)]
quirks: remove the multiplier for the Lenovo UltraNav SK-8845
Looks like this isn't needed, see #112. Or Lenovo re-used USB IDs for this
device in which case we'll have to figure out some other solution once someone
complains.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/112
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 13 Aug 2018 05:25:48 +0000 (15:25 +1000)]
touchpad: improve pointer jump detection
Previously, we had a hard threshold of 20mm per event frame. That is just
about achievable by really fast movements (in which case you don't care too
much about the jumps anyway because you've already hit the edge of the screen).
Sometimes pointer jumps have lower deltas that are achievable even on slower,
more likely motions. Analysis of finger motion has shown that while a delta
>7mm per event is possible, jumping _by_ 7mm between two events is unlikely
and indicates a pointer jump. So let's diff the most recent delta and the
current delta, if it increases by 7mm between two event frames let's say it's
a pointer jump and discard it.
Helps with but does not fully resolve:
https://gitlab.freedesktop.org/libinput/libinput/issues/80
https://gitlab.freedesktop.org/libinput/libinput/issues/36
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Sun, 19 Aug 2018 23:49:55 +0000 (09:49 +1000)]
doc/user: move the tablet capabilities debugging to a separate page
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Matt Mayfield [Sun, 19 Aug 2018 16:54:52 +0000 (11:54 -0500)]
doc/user: correct some small typos
Peter Hutterer [Thu, 16 Aug 2018 02:39:15 +0000 (12:39 +1000)]
doc/user: move the trackpoint multiplier debugging to Troubleshooting
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 16 Aug 2018 02:26:27 +0000 (12:26 +1000)]
doc/user: fix two links for sphinx syntax
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 13 Aug 2018 23:01:46 +0000 (09:01 +1000)]
libinput 1.11.902
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 17 Jul 2017 04:26:34 +0000 (14:26 +1000)]
test: when testing for a touch sequence, assert it's the same slot's sequence
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 13 Aug 2018 04:23:28 +0000 (14:23 +1000)]
touchpad: drop check for left button areas
No functional changes, anything that's in the top/bottom area but not in the
respective middle/right area is a left button.
Introduced by
13bda5adcb2f81f8ed9de762910ac9ecfa3b250b
Fixes coverity complaint about use of uninitialized variable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 13 Aug 2018 04:00:54 +0000 (14:00 +1000)]
touchpad: change the min vector for the scroll lock to 0.15
This makes the difference between noticable delay and unnoticable while having
virtually no false positives (for me).
https://gitlab.freedesktop.org/libinput/libinput/issues/101
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 7 Aug 2018 04:49:27 +0000 (14:49 +1000)]
touchpad: if a finger in the button area moves by more than 5mm, release it
The software button area is currently a partially-dead area. If the finger
moves into or out of the area pointer motion works. Finger motion within the
area however does not generate motion.
The main motivation for this was to avoid accidental pointer motion when a
button is pressed. This is required for stationary fingers but once you move a
significant distance, those bets are off.
So if the finger moves by more than 5mm from where it was put down, release it
and let it move the pointer.
The full impact is largely limited to horizontal movements within the button
area because:
- leaving the finger at the bottom area for 300ms without movement triggers
the thumb identification, so it won't move anyway.
- moving the finger north is likely to go off the button area before we
trigger this threshold.
https://gitlab.freedesktop.org/libinput/libinput/issues/86
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 7 Aug 2018 05:28:11 +0000 (15:28 +1000)]
touchpad: coding style fixes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 7 Aug 2018 04:33:47 +0000 (14:33 +1000)]
touchpad: rename 'curr' to 'current'
We can affort the extra 3 bytes storage.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 02:55:13 +0000 (12:55 +1000)]
quirks: don't allow single quotes for values
At least not opening single quotes, same as the double quotes we already have.
Add the tests for both.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 02:11:15 +0000 (12:11 +1000)]
tests: more tests for quirks handling
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 9 Aug 2018 23:23:43 +0000 (09:23 +1000)]
test: add tests for successful/failing parsing of various quirks
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 02:17:07 +0000 (12:17 +1000)]
test: fix quirks test for invalid bus type matches
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 00:44:30 +0000 (10:44 +1000)]
util: tighten safe_atod parsing to only parse 'normal' numbers
We don't have a sensible use case where we want hex to double, or INF to
double, or any of that. So check the strings for invalid characters and bail
out early. Invalid characters include 'e' and whitespaces too, we don't need
those.
Small chance of things breaking: if the user-exposed calibration matrix
property was specified using hex numbers this will stop working now. I'll take
that risk.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 00:50:39 +0000 (10:50 +1000)]
util: switch to a check for isnormal for safe_atod
Effectively the same check as before but this should also encompass
FP_SUBNORMAL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 9 Aug 2018 23:18:47 +0000 (09:18 +1000)]
util: fail property parsing if the dimensions are 0
There is no use-case for a zero width/height in anything using that property.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 06:32:06 +0000 (16:32 +1000)]
test: replace hand-rolled backtrace function with gstack
Let's use something that specializes in that task and does a better job of it
than whatever we'll come up with. Due to how it's implemented the stacktrace
will always show waitpid() as frame 0 now but we can live with that.
gstack prints to stdout but litest_log() uses stderr, so we cannot just call
system(), we have do do the pipe/fork/exec/waitpid/read dance.
We could use that to filter the #0 frame showing waidpid() from gstack but
meh.
This drops the libunwind and addr2line dependency and replaces it with gstack
instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 01:54:24 +0000 (11:54 +1000)]
meson.build: the selftest doesn't need all litest sources
Drops about 70 ninja targets.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 01:39:04 +0000 (11:39 +1000)]
test: remove the deviceless test runner, make it a commandline arg instead
No need to rebuild everything with an ifdef, we can just use meson to pass an
argument to the test itself and filter based on that. This drops about 100
ninja targets.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 01:32:31 +0000 (11:32 +1000)]
test: switch two ints to bools
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 10:40:44 +0000 (20:40 +1000)]
doc/user: move touchpad jitter to troubleshooting
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 10:39:49 +0000 (20:39 +1000)]
Fix doc links to use dashes, not underscores
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 10 Aug 2018 10:38:23 +0000 (20:38 +1000)]
doc/user: move the jumping cursor page to troubleshooting
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 10:55:58 +0000 (20:55 +1000)]
test: ensure we write something during litest_sendfile
This mostly shuts up coverity about potentially using a negative size to
write.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 05:39:18 +0000 (15:39 +1000)]
test: remove an obsolete comment
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 04:02:15 +0000 (14:02 +1000)]
meson.build: drop the now-unused liblitest
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 01:18:20 +0000 (11:18 +1000)]
doc: use configure_file()'s @PLAINNAME@ instead of calling install
Instead of calling out to install on every ninja call, use @PLAINNAME@ as
substitution for just copying the file over. This gets around the "no
directory allowed in output file" limitation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 01:01:38 +0000 (11:01 +1000)]
doc/api: drop git-version.dox
No longer needed
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 01:21:12 +0000 (11:21 +1000)]
meson.build: process the various tools as a single file list
All these tools just copy the input file over, we can do that in a loop
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 02:03:13 +0000 (12:03 +1000)]
meson.build: silence meson warning that we should use configure_file's copy
Yes, we should use 'copy'. But that requires 0.47 and that's not an option
right now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 8 Aug 2018 01:36:18 +0000 (11:36 +1000)]
meson.build: fix typo in version to compare to
Introduced in
e428e5e87a83127db90476e5a7d7e48546fafd6f
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Matt Mayfield [Wed, 8 Aug 2018 16:31:57 +0000 (11:31 -0500)]
touchpad: 90-degree scroll helper
This makes two-finger scrolling in straight lines easier, while still
allowing free/diagonal movement. It works in three stages:
1) Initial movement
- For the first few millimeters, scroll movements within 30 degrees
of horizontal or vertical are straightened to 90-degree angles.
- Scroll movements close to 45 degree diagonals are unchanged.
- If movement continues very close to straight horizontal or
vertical, stage 2 begins and the axis lock engages.
- If movement continues along a diagonal, stage 2 is skipped and
free scrolling is immediately enabled.
2) Axis lock
- If the user scrolls fairly closely to straight vertical, no
horizontal movement will happen at all, and vice versa.
- It is possible to switch between straight vertical and straight
horizontal, and the axis lock will automatically change.
- If deliberate diagonal movement is detected at any point, stage
3 begins and the axis lock disengages.
3) Free scrolling
- Scrolling is unconstrained until the fingers are lifted.
Matt Mayfield [Wed, 8 Aug 2018 16:00:22 +0000 (11:00 -0500)]
test: touchpad: add tests for 90 degree scroll (axis lock)
Matt Mayfield [Tue, 7 Aug 2018 14:34:28 +0000 (09:34 -0500)]
doc/user: add 90-degree scroll behavior
Peter Hutterer [Tue, 7 Aug 2018 02:42:40 +0000 (12:42 +1000)]
tools: debug-*: show unaccelerated deltas for pointer events
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 23:34:49 +0000 (09:34 +1000)]
test: add a 10ms delay for scrolling tests
No touchpad gives us these events with a 0 delay, so let's not test for that.
This is required for adding timing-sensitive scroll code, see
https://gitlab.freedesktop.org/libinput/libinput/issues/101.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 23:53:28 +0000 (09:53 +1000)]
test: touchpad: swap an int for a bool
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 23:56:54 +0000 (09:56 +1000)]
test: rename the x220 clickpad to something more telling
Having this as the generic "synaptics" touchpad in the tests is not helpful,
this touchpad is tiny and quite special these days.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 22:26:53 +0000 (08:26 +1000)]
tablet: unify the license text with what we have in COPYING
Use the same blurb everywhere, changing from the old style MIT to the Expat
license we're using everywhere else.
Similar to
bc9f16b40e23a1d25c105a4207b97d65253f0d98
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 05:24:04 +0000 (15:24 +1000)]
filter: always init a delta smoothener for 10/10ms on trackpoints
If the trackpoint gives us deltas with less than 10ms intervals, something is
wrong. Could be bad hardware, a glitch in the matrix or a discontinuity in
the otherwise appropriately named time-space continuum. Usually it's the
first.
Let's always set up trackpoint delta smoothening for 10ms to improve the
pointer speed calculation and avoid jerky behaviors. i.e. if a trackpoint
delta comes in below 10ms, pretend it came in with a 10ms interval for
calculating the speed.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/104
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 05:19:57 +0000 (15:19 +1000)]
doc/user: drop the sphinx -a flag
Let's trust sphinx to know what to rebuild
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 04:06:48 +0000 (14:06 +1000)]
tools: record: don't bother setting last_ms to 0 on the first event
The first event we receive is set to a 0ms offset anyway. Setting last_ms to 0
on the first event means the first two events have +0ms offset printed to the
log. Skip it, so the second event has the right offset.
This is human-readable data only, no effect on the recording file itself.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 03:37:30 +0000 (13:37 +1000)]
doc/user: add touchpad pressure debugging as separate page
This way we can put it under Troubleshooting
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 03:37:00 +0000 (13:37 +1000)]
doc/user: add the quirks tool to the tool list
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 6 Aug 2018 03:31:34 +0000 (13:31 +1000)]
doc/user: match the quirks list output with the code
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Matt Mayfield [Sun, 5 Aug 2018 17:55:02 +0000 (12:55 -0500)]
Remove seemingly extra pasted line from license
Peter Hutterer [Thu, 2 Aug 2018 06:58:58 +0000 (16:58 +1000)]
touchpad: improve finger counting for synaptics serial touchpads
A three-finger touch may cause slot N to end, in a frame after the
BTN_TOOL_TRIPLETAP. This causes tp->nfinger_down to be decremented to 2 as the
touch switches to MAYBE_END - which happens to be our num_slots. We exit early
and never restore the touch correctly.
Fix this by checking that the number of fake touches is equal to the slots, if
it is higher then we need to check for recovery.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/99
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 06:08:54 +0000 (16:08 +1000)]
fallback: add support for ABS_MT_TOOL_TYPE for touch screens
Cancel any touches that trigger MT_TOOL_PALM.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/25
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 06:24:04 +0000 (16:24 +1000)]
test: handle ABS_MT_TOOL_TYPE from the litest devices
We want to autoreplace this value where possible but not scale it to min/max,
this is effectively an enum. The same is true for slot/tracking id, so let's
add it here too.
Because it's an enum and 99% of the cases require MT_TOOL_FINGER, we always
fall back to that instead of using the axis_defaults that we use for other
axes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 06:04:35 +0000 (16:04 +1000)]
test: add test helpers for touch sequence parts
The necessary helpers to test for a touch event + one touch frame and the
extra case for the TOUCH_CANCEL in is_touch_event
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 05:45:22 +0000 (15:45 +1000)]
fallback: move flushing MT events to a helper function
No functional changes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 05:41:59 +0000 (15:41 +1000)]
fallback: change a list of if conditions to a switch statement
This used to do a lot more but now it can be handled as simple switch
statement. Bonus: we get to log a bug if we ever get here in NONE state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 13 Jul 2018 05:22:23 +0000 (15:22 +1000)]
fallback: move the mt slot state struct/enum here
Not needed by the more generic evdev header
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 3 Aug 2018 01:15:31 +0000 (11:15 +1000)]
doc/user: mark the touchpads page as orphan
Only one link leads to it and it doesnt (right now) fit into the hierarchy.
Let's get rid of the sphinx warning.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 3 Aug 2018 01:04:18 +0000 (11:04 +1000)]
doc/user: add custom 404 pages for the old links
Switching from doxygen to sphinx broke a bunch of links because doxygen used
whatever the argument to @page was - and that usually had underscores. Sphinx
uses filenames (which use dashes) so now we have a bunch of old links going to
a 404. For the transition period at least, insert a custom 404 page for each
of those to tell users this doesn't exist anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 3 Aug 2018 00:13:09 +0000 (10:13 +1000)]
Revert "doc/user: add a custom 404 page"
Nope, doesn't work, our server doesn't support htaccess.
This reverts commit
548e0eb98b46e328a64215323962c11df17b49ce.
Peter Hutterer [Thu, 2 Aug 2018 05:02:18 +0000 (15:02 +1000)]
util: remove now-unused helper functions
Obsolete with the switch to the device quirks
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 2 Aug 2018 01:01:50 +0000 (11:01 +1000)]
doc/user: add a custom 404 page
Things moved around, so let's have a custom 404 page where we can put
information in. This ist the barebones version, not sure if .htaccess is
supported.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:52:59 +0000 (09:52 +1000)]
doc: drop the doxygen conversion script
It's really not that good, so no point to keep it around
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:44:01 +0000 (09:44 +1000)]
doc/user: rename filenames with underscores to dashes
Everything else is, let's be consistent here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:37:54 +0000 (09:37 +1000)]
doc/user: swap some note out with hint
Because why not...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:30:57 +0000 (09:30 +1000)]
doc/user: add a hack to get to the git version
meson doesn't have configuration_data() in vcs_tag so we can only replace one
string. sphinx cannot include things in-line.
Since we want the git version to be replaced in random places, we need to put
it into rst_prolog in conf.py - but that's where we neet to replace other
things too. Work around this by generating a mini python module that returns
the git version, then call that in conf.py.
Side-bonus: we now have access to the full commit and the abbreviated commit.
Not that anything actually uses this...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 22:47:06 +0000 (08:47 +1000)]
doc/user: drop the old page-hierarchy page
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 07:12:38 +0000 (17:12 +1000)]
doc/user: use extlink for a common commit links
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 00:34:22 +0000 (10:34 +1000)]
doc/user: more fixes including adding a device-types section
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 00:16:17 +0000 (10:16 +1000)]
doc/user: tidy up the development page
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 23:42:57 +0000 (09:42 +1000)]
README: drop a @ref in favor of the full link
No doxygen leftovers in README anymore, exspecially now that we don't use it
for doxygen anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 05:47:03 +0000 (15:47 +1000)]
fallback: add another debug message for tablet-mode keyboard suspend
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 1 Aug 2018 05:28:58 +0000 (15:28 +1000)]
fallback: change a debug message to be less ambiguous
"activated" sounds like we're disabling things here, but we're just pairing
the two devices
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 08:17:48 +0000 (18:17 +1000)]
doc/user: more documentation cleanups and fixes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 06:03:49 +0000 (16:03 +1000)]
doc/user: some rewording and improvements
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 03:00:38 +0000 (13:00 +1000)]
meson.build: fix name of the measure touchpad-tap script
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:50:57 +0000 (10:50 +1000)]
doc/user: update the 'no package found' link to the meson version post
Now that we dropped autotools anyway, it's better to link to the meson version
of that blog post.
Related #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:49:47 +0000 (10:49 +1000)]
doc/user: building - promote dependencies to a higher-level section
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:48:34 +0000 (10:48 +1000)]
doc/user: the SELinux section doesn't apply to modern meson
Related #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:42:06 +0000 (10:42 +1000)]
doc/user: re-do the conditional build section
Related #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:25:01 +0000 (10:25 +1000)]
doc/user: drop the autotools builds
Anyone who's still on <= 1.8 either knows how to build it already or relies on
a distribution to do that for them. Drop the section.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:22:31 +0000 (10:22 +1000)]
doc/user: add a note on meson's dependency() in the building docs
See #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 31 Jul 2018 00:17:59 +0000 (10:17 +1000)]
doc/user: mesonconf is meson configure
Listed in #96
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
jeff [Mon, 30 Jul 2018 17:03:03 +0000 (13:03 -0400)]
tablet: clear tablet history on tool contact change
On some ELAN tablets we get a coordinate jump in the same frame that we put
the tip down. The existing axis smoothing causes that jump to be somewhere in
the middle between the previous and the next coordinates, causing a small
stroke from the smoothed position to the next. Prevent this by resetting the
history on tip down/up so we always take that coordinate.
Fixes #94
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 30 Jul 2018 05:57:08 +0000 (15:57 +1000)]
libinput 1.11.901
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Sat, 28 Jul 2018 09:35:36 +0000 (19:35 +1000)]
doc/user: add a page detailing what configuration toggles are available
High level view only but at least it's a link we can point people to.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 10 Jul 2018 07:32:35 +0000 (17:32 +1000)]
dox: switch to sphinx for the user-visible documentation
This is a large commit because it's difficult to split this up and we don't
care about bisecting here anyway.
doxygen is going to produce the API documentation only
sphinx is going to produce the prose user (and a bit of developer) documentation.
The source split is doc/api and doc/user.
Steps performed:
- run the doxygen-to-sphinx.sh script to convert all .dox sources to .rst
- manually fixed the .rst to render correctly
- add a few extra .rst documents to generate the right hierarchy
- hook up sphinx-build in meson
- add a new @mainpage for doxygen more aimed at developers
For the build directory:
- sphinx produces /Documentation
- doxygen now produces /api/
These need to be manually combined in the wayland-web repo, meson doesn't
support subdirectories as output paths within the build dir and the
documentation doesn't need to be installed anywhere.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 30 Jul 2018 02:04:05 +0000 (12:04 +1000)]
GitLab CI: print out the image age in seconds
Helps with debugging purposes
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Mon, 30 Jul 2018 00:51:36 +0000 (10:51 +1000)]
Gitlab CI: set DEBIAN_FRONTEND noninteractive for the Ubuntu images
Because Godot doesn't care about tzdata, so waiting for him is pointless.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 27 Jul 2018 07:31:14 +0000 (17:31 +1000)]
Add the buildreqs for sphinx-build
Separate commit so we can prep the containers for the real PR and thus test if
something break.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 22:32:31 +0000 (08:32 +1000)]
doc: split the graphs into a separate array for re-use
We need this in the sphinx documentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 05:01:39 +0000 (15:01 +1000)]
doc: move the @verbatim start to the list item
This is mostly for sphinx' parsing benefit, doxygen doesn't need it and
renders the same either way.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Thu, 26 Jul 2018 01:22:17 +0000 (11:22 +1000)]
doc: device-quirks: redo the model quirks <dl> for sphinx' benefit
sphinx only supports one line of <dt> content, so we have to compress these.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Tue, 24 Jul 2018 01:25:16 +0000 (11:25 +1000)]
doc: a few replacements to make sphinx happy/prettier
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 27 Jul 2018 04:01:35 +0000 (14:01 +1000)]
doc: refer to "the libinput documentation" in a few @see cases
This is in preparation for a change to sphinx as the user-visible
documentation. Ideally we could cross-link between the two but that's tricky
to do automatically. Linking to the html pages/anchors directly works fine but
risks the links going stale, especially while the documentation is still in
flux.
Having a generic "refer to the libinput documentation" is a bit of a cop-out
least this way the links cannot go stale.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Fri, 27 Jul 2018 05:51:31 +0000 (15:51 +1000)]
doc: drop a few unnecessary @ref
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter Hutterer [Wed, 25 Jul 2018 22:50:13 +0000 (08:50 +1000)]
doc: enable warnings in doxygen
We want to see missed links
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>