Rene Sapiens [Sat, 10 Jul 2010 02:23:59 +0000 (21:23 -0500)]
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pdwSize to buff_size
pdwState to board_state
pdwValue to value
pdwVersion to version
pElemExisting to elem_existing
pEntry to entry
pExists to exists
pfEnablePerf to enable_perf
pGenObj to gen_obj
phChnlMgr to channel_mgr
phChnl to chnl
phCodMgr to cod_mgr
phDCDHandle to dcd_handle
phDcdMgr to dcd_mgr
phDehMgr to deh_manager
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rene Sapiens [Sat, 10 Jul 2010 02:23:58 +0000 (21:23 -0500)]
staging: ti dspbridge: Rename words with camel case
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pArb to arb
pbAlreadyAttached to already_attached
pBaseAddr to base_addr
pbHostBuf to host_buff
pBufVa to buf_va
pChnlInfo to channel_info
pConfig to config_param
pContent to content
pContext to context
pdcdProps to dcd_prop
pDepLibUuids to dep_lib_uuids
pDevNodeString to dev_node_strg
pDispAttrs to disp_attrs
pDsp to dsp
pdwAutoStart to auto_start
pdwChnl to chnl
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rene Sapiens [Sat, 10 Jul 2010 02:23:57 +0000 (21:23 -0500)]
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
hStrm to stream_obj
iMode to io_mode
irqMask to irq_mask
lOffset to offset
memPtr to mem_ptr
moduleId to module_id
msgCallback to msg_callback
msgList to msg_list
nArgc to num_argc
nEntryStart to entry_start
nMemSpace to mem_space
nStatus to node_status
nStrms to strms
numLibs to num_libs
numLockedEntries to num_locked_entries
pageSize to page_sz
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rene Sapiens [Sat, 10 Jul 2010 02:23:56 +0000 (21:23 -0500)]
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
hDevContext to dev_ctxt
hDevExtension to dev_extension
hdevObject to device_obj
hDispObject to disp_obj
hDrVObject to driver_obj
hDRVObject to driver_obj
hMGRHandle to mgr_handle
hNldrObject to nldr
hNode1 to node1
hNode2 to node2
hNodeRes to node_resource
hPCtxt to process_ctxt
hProc to proc
hStreamHandle to stream_handle
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rene Sapiens [Sat, 10 Jul 2010 02:23:55 +0000 (21:23 -0500)]
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
dspAddr to dsp_address
dspAdr to dsp_adr
dspBaseVirt to dsp_base_virt
dwDeviceContext to device_context
dwDSPAddrOffset to dsp_addr_offset
dwDSPAddr to dsp_addr
dwErrInfo to error_info
dwGPPBaseBA to gpp_base_ba
dwMask to mask
dwTimeout to timeout
dwTimeOut to timeout
dwValue to value
entryNum to entry_num
execFile to exec_file
fFlush to flush_data
FlushMemType to flush_mem_type
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rene Sapiens [Fri, 9 Jul 2010 22:48:52 +0000 (17:48 -0500)]
staging: ti dspbridge: fix compilation error
This patch fix a compilation error in uuid_hex_to_bin
due to the patch "simplify and clean up"
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rene Sapiens [Thu, 8 Jul 2010 23:11:08 +0000 (18:11 -0500)]
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
aAddr to addrs
aArgs to args
aSize to len
baseAddress to base_address
bDynamicLoad to dynamic_load
bForce to force
cCharSize to char_size
cContentSize to content_size
cCount to count
cDspCharSize to dsp_char_size
cIndex to index
ClkId to clock_id
cOrigin to origin
dataBasePhys to data_base_phys
dcdObjUnion to dcd_obj
deviceContext to device_ctxt
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman [Thu, 8 Jul 2010 23:25:55 +0000 (16:25 -0700)]
Staging: quickstart: add the quickstart driver to the build
This adds the needed Kconfig and Makefile changes to add
the quickstart driver to the build.
Cc: Angelo Arrifano <miknix@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Angelo Arrifano [Thu, 8 Jul 2010 23:20:56 +0000 (16:20 -0700)]
Staging: add quickstart acpi key driver
This adds the quickstart acpi key driver to the staging tree
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ky Srinivasan [Thu, 20 May 2010 18:54:06 +0000 (12:54 -0600)]
Staging: hyperv: add clocksource driver
This patch is a clocksource implementation suitable for guests hosted on
HyperV. Time keeping in Linux guests hosted on HyperV is unstable. This
clocksource driver fixes the problem. This driver uses the hyperv
detection code integrated into the kernel.
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ky Srinivasan [Mon, 28 Jun 2010 14:48:55 +0000 (08:48 -0600)]
x86: Export the symbol ms_hyperv
This is needed so that the staging hyperv can properly access this
symbol.
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arnd Bergmann [Wed, 7 Jul 2010 21:40:09 +0000 (23:40 +0200)]
Staging: use llseek in all file operations
These could not be detected by the semantic patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Randy Dunlap [Fri, 2 Jul 2010 23:44:13 +0000 (16:44 -0700)]
Staging: solo: add delay.h header
Several solo drivers need <linux/delay.h>, so add it to the
private solo6010.h header file.
drivers/staging/solo6x10/solo6010-core.c:191: error: implicit declaration of function 'mdelay'
drivers/staging/solo6x10/solo6010-tw28.c:181: error: implicit declaration of function 'msleep_interruptible'
drivers/staging/solo6x10/solo6010-gpio.c:78: error: implicit declaration of function 'udelay'
drivers/staging/solo6x10/solo6010-v4l2-enc.c:254: error: implicit declaration of function 'mdelay'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Uwe Kleine-König [Thu, 1 Jul 2010 18:48:45 +0000 (20:48 +0200)]
Staging: usbip: fix typos concerning "sequential"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Peter Huewe [Wed, 7 Jul 2010 02:52:16 +0000 (04:52 +0200)]
Staging: panel: Prevent double-calling of parport_release - fix oops.
This patch prevents the code from calling parport_release and
parport_unregister_device twice with the same arguments - and thus fixes an oops.
Rationale:
After the first call the parport is already released and the
handle isn't valid anymore and calling parport_release and
parport_unregister_device twice isn't a good idea.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: stable <stable@kernel.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:16 +0000 (14:16 +0400)]
Staging: vme: vme_ca91cx42: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:20 +0000 (14:16 +0400)]
Staging: vme: vme_tsi148: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:25 +0000 (14:16 +0400)]
Staging: wlags49_h2: wl_netdev: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:29 +0000 (14:16 +0400)]
Staging: wlags49_h2: wl_pci: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:33 +0000 (14:16 +0400)]
Staging: wlags49_h2: wl_profile: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:12 +0000 (14:16 +0400)]
Staging: rt2860: usb_main_dev: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:08 +0000 (14:16 +0400)]
Staging: rt2860: rt_linux: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:04 +0000 (14:16 +0400)]
Staging: rt2860: rtmp_timer: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:15:56 +0000 (14:15 +0400)]
Staging: dream: pmem: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:15:43 +0000 (14:15 +0400)]
Staging: crystalhd_lnx: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:15:36 +0000 (14:15 +0400)]
Staging: comedi: pcm3724: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Tue, 29 Jun 2010 10:16:00 +0000 (14:16 +0400)]
Staging: otus: wrap_sec: remove casts from void*
Remove unnesessary casts from void*.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andy Shevchenko [Tue, 6 Jul 2010 15:08:52 +0000 (18:08 +0300)]
staging: tidspbridge: gen: simplify and clean up
There is recently added hex_to_bin() kernel's method which we could use
instead of custom long function.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:36:26 +0000 (16:36 +0300)]
staging: ti dspbridge: add _BACKTRACE config
We only want this code when testing.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:36:25 +0000 (16:36 +0300)]
staging: ti dspbridge: use _DEBUG for debug trace
Obviously nobody was using DSP_TRACEBUF_DISABLED, since it wasn't even
standarized between TRACEBUF and TRACE_BUF.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:36:24 +0000 (16:36 +0300)]
staging: ti dspbridge: improve Kconfig
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:36:23 +0000 (16:36 +0300)]
staging: ti dspbridge: prefix configs with TIDSPBRIDGE
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:39 +0000 (16:34 +0300)]
staging: ti dspbridge: deh: update copyright notice
Add myself... git blame seems to agree :)
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:38 +0000 (16:34 +0300)]
staging: ti dspbridge: deh: tidying up
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:37 +0000 (16:34 +0300)]
staging: ti dspbridge: move mmufault to deh
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:36 +0000 (16:34 +0300)]
staging: ti dspbridge: access deh directly
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:35 +0000 (16:34 +0300)]
staging: ti dspbridge: deh: remove err_info
We only use it to pass the MMU fault address.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:34 +0000 (16:34 +0300)]
staging: ti dspbridge: deh: remove get_info
Nobody is using it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:33 +0000 (16:34 +0300)]
staging: ti dspbridge: deh: refactor in mmu_fault_print_stack()
All this code is just to print the stack, so make it clearer.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:32 +0000 (16:34 +0300)]
staging: ti dspbridge: deh: ensure only tlb #0 is enabled
We don't want the DSP to continue writing into other mapped pages, no
matter how unlikely.
Based on extensive discussion with Fernando Guzman Lugo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:31 +0000 (16:34 +0300)]
staging: ti dspbridge: mmu: add hw_mmu_tlb_flush_all()
So that it can be used in more than one place.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:30 +0000 (16:34 +0300)]
staging: ti dspbridge: remove unused code
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:29 +0000 (16:34 +0300)]
staging: ti dspbridge: deh: free dummy page immediately
There's no need to keep it around. DSP should stop trying to access
system memory.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:28 +0000 (16:34 +0300)]
staging: ti dspbridge: mmufault: trivial cleanups
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:34:27 +0000 (16:34 +0300)]
staging: ti dspbridge: deh: trivial cleanups
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Felipe Contreras [Sun, 4 Jul 2010 13:31:47 +0000 (16:31 +0300)]
staging: ti dspbridge: remove contributor leftovers
The old history (before git) had these two character ids that never
stood any chance to identify anybody.
Nobody from that list was moved to the good list of contributors, so
let's get rid of it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Mon, 28 Jun 2010 11:55:20 +0000 (15:55 +0400)]
Staging: otus: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Mon, 28 Jun 2010 11:55:41 +0000 (15:55 +0400)]
Staging: wlags49_h2: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Mon, 28 Jun 2010 11:55:37 +0000 (15:55 +0400)]
Staging: winbond: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Mon, 28 Jun 2010 11:55:32 +0000 (15:55 +0400)]
Staging: rtl8192u: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Mon, 28 Jun 2010 11:55:28 +0000 (15:55 +0400)]
Staging: rtl8192e: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Mon, 28 Jun 2010 11:55:24 +0000 (15:55 +0400)]
Staging: otus: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Mon, 28 Jun 2010 11:55:16 +0000 (15:55 +0400)]
Staging: otus: use ARRAY_SIZE
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x).
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Dave Jones [Sat, 3 Jul 2010 03:04:44 +0000 (23:04 -0400)]
Staging: rtl8192u: remove a copy of 80211.h
We had a request to enable one of the realtek network drivers in staging in Fedora.
After a quick lookover, I decided this wasn't such a great idea.
In doing so though, I noticed we have 6 copies of ieee80211.h there now,
Two drivers even have two copies of it. (Even worse, cleanups have been pointlessly
happening to both files). The patch below removes one of them, which is asides
from whitespace, identical afaics. With a change of filename to the #include,
it all still compiles for me.
A better fix would be to remove both, and have them use the core ieee80211 stuff,
but this is at least a tiny step in the right direction.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Niadh [Mon, 28 Jun 2010 01:23:14 +0000 (02:23 +0100)]
Staging: RT2860: Fixed everything in ap.h.
Fixed the single two warnings in ap.h which left this file with nothing left to clean.
Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Sun, 27 Jun 2010 13:20:47 +0000 (17:20 +0400)]
staging: slicoss: error handling with goto
This patch makes error handling more readable due to 'goto err' pattern.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Sun, 27 Jun 2010 13:20:46 +0000 (17:20 +0400)]
staging: slicoss: error handling with goto
This patch makes error handling more readable due to 'goto err' pattern.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Sun, 27 Jun 2010 13:20:44 +0000 (17:20 +0400)]
staging: slicoss: Remove STATUS_XXX defines.
Remove defines of STATUS_XXX from header file.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Wed, 30 Jun 2010 13:02:45 +0000 (17:02 +0400)]
staging: slicoss: Change return codes to -EYYY.
Change defined STATUS_XXX return codes to standard -EYYY.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Sat, 3 Jul 2010 15:20:47 +0000 (19:20 +0400)]
Staging: comedi: use for_each_pci_dev()
Use for_each_pci_dev() to simplify the code.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark [Tue, 6 Jul 2010 17:23:15 +0000 (18:23 +0100)]
Staging: comedi: Cleanup on dmm32at.c from checkpatch.pl
This patch cleans up some style issues in dmm32at.c as found by checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mark [Tue, 6 Jul 2010 02:18:19 +0000 (03:18 +0100)]
Staging: comedi: Cleanup adv_pci1710.c from checkpatch.pl
This patch cleans up some issues discovered by checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gustavo Silva [Sun, 27 Jun 2010 17:40:31 +0000 (12:40 -0500)]
Staging: comedi: kcomedilib: fix coding style issues in kcomedilib_main.c
This is a patch to the kcomedilib_main.c file that fixes up some printk() warning issues.
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Maurice Dawson [Sat, 26 Jun 2010 16:02:25 +0000 (17:02 +0100)]
Staging: comedi: fix over 80 character coding style issue in ni_labpc.c
This is a patch to the ni_labpc.c file that fixes up 80 character warnings found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kulikov Vasiliy [Sat, 3 Jul 2010 16:04:43 +0000 (20:04 +0400)]
Staging: vt6655: use for_each_pci_dev()
Use for_each_pci_dev() to simplify the code.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Charles Clément [Wed, 30 Jun 2010 07:46:24 +0000 (09:46 +0200)]
Staging: vt6655: simplify broadcast and multicast ethernet address test
A broadcast address is also a multicast address so simplify test cases where
possible.
As suggested by Joe Perches.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andres More [Sat, 26 Jun 2010 17:08:04 +0000 (14:08 -0300)]
staging: vt6656: removed SndEvt_ToAPI definition
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andres More [Fri, 25 Jun 2010 23:20:58 +0000 (20:20 -0300)]
staging: vt6656: removed TxInSleep definition
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andres More [Fri, 25 Jun 2010 22:48:10 +0000 (19:48 -0300)]
staging: vt6656: removed unused IS_NULL_ADDRESS definition
Removed custom definition not used elsewhere, is_zero_ether_addr()
is already provided if required.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
H Hartley Sweeten [Fri, 25 Jun 2010 22:14:09 +0000 (15:14 -0700)]
Staging: dt3155_isr: cleanup fbuffer usage
Now that dt3155_drv.c is not dependent on the global symbol
dt3155_fbuffer[], declared in dt3155_isr.c, remove it.
This also fixes many of the coding style problems in dt3155_isr.c.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
H Hartley Sweeten [Fri, 25 Jun 2010 21:19:50 +0000 (14:19 -0700)]
Staging: dt3155: remove remaining 32-bit and 8-bit global registers
Remove the remaining global 32-bit and 8-bit i2c registers. Create a
local variable of the correct type where they are needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mike Thomas [Sat, 26 Jun 2010 19:20:59 +0000 (20:20 +0100)]
Staging: easycap: Add dependencies to Kconfig
The "depends on" line was inadvertently omitted from the inaugural patch.
Signed-off-by: Mike Thomas <rmthomas@sciolus.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gustavo Silva [Sat, 26 Jun 2010 22:36:53 +0000 (17:36 -0500)]
Staging: otus: fix coding style issues in ioctl.c
This is a patch to the ioctl.c file that fixes up the following
issues:
ERROR: that open brace { should be on the previous line x 3
WARNING: please, no space before tabs x 1
ERROR: space required before the open parenthesis '(' x 5
WARNING: braces {} are not necessary for single statement blocks x 2
ERROR: space prohibited after that '!' (ctx:BxW) x 1
WARNING: suspect code indent for conditional statements x 2
ERROR: do not use C99 // comments x 1
WARNING: braces {} are not necessary for any arm of this statement x 4
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Thu, 8 Jul 2010 13:55:17 +0000 (08:55 -0500)]
Staging: ti-st: remove global references
Providing a context which can be passed around the driver, the KIM's platform
driver's struct device to be used to dev_set_drvdata and dev_get_drvdata.
The ST core's data is passed around using tty's disc_data and in other
cases the ST KIM's platform device is exposed from the board-XX.c which
adds KIM platform device whose dev is used.
Thereby remove the need for the global reference struct kim_data_s *kim_gdata;
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Thu, 8 Jul 2010 13:55:16 +0000 (08:55 -0500)]
Staging: ti-st: Update TODO
An important TODO was to remove global references in TI-ST driver,
thereby providing a context to the driver.
This should also serve as a small step in removal of the single device
limit.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:23 +0000 (12:54 +0100)]
staging:iio:max1363 add theshold event support
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:22 +0000 (12:54 +0100)]
staging:iio: Add ability to have event attributes with awkward names
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:21 +0000 (12:54 +0100)]
staging:iio: tsl2563 abi fixes and interrupt handling
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:20 +0000 (12:54 +0100)]
staging:iio: Fix IIO_EVENT_ATTR initialization of list head
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:19 +0000 (12:54 +0100)]
staging:iio: Code cleanups
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:18 +0000 (12:54 +0100)]
staging:iio: Remove unnecessary event_idr and all references
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:17 +0000 (12:54 +0100)]
staging:iio: Remove used iio_work_cont definition and all references
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:16 +0000 (12:54 +0100)]
staging:iio:kxsd9 remove unnecessary includes
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:15 +0000 (12:54 +0100)]
staging:iio:lis3l02dq cleanups
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:14 +0000 (12:54 +0100)]
staging:iio:max1363 trivial code and comment cleanups.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Sat, 26 Jun 2010 11:54:13 +0000 (12:54 +0100)]
staging:iio:max1363 use device_id instead of searching on name again
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Lüssing [Tue, 6 Jul 2010 19:05:18 +0000 (21:05 +0200)]
Staging: batman-adv: Add last-seen in originator table
Right now, there is no easy/intuitive way to find out whether a node
might have vanished. This commit adds the time when a node was last seen
to the originator table output, so that a common user is able to tell
whether a node might have gone without having to wait PURGE_TIMEOUT
seconds until that node gets "garbe-collected".
It also puts the the versioning information in an extra line, as
the first one of this debug output would otherwise get too long.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Tue, 6 Jul 2010 19:05:17 +0000 (21:05 +0200)]
Staging: batman-adv: Move printk to simplified macros
Each general printk which is not informative by itself for a specific
batX device were moved to pr_(info|warning|err) as it provides an easy
interface which for example resolves the problem to add the prefix
"batman-adv: " before each line.
All information which is specific to a batX device will be printed using
a bat_(info|err|warning) macro to prefix it also with "batman-adv:
batX:" in each line.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Tue, 6 Jul 2010 19:05:16 +0000 (21:05 +0200)]
Staging: batman-adv: add routing debug log accessible via debugfs
All routing debug messages are saved in a ring buffer that can be
read via the debugfs file "log".
Note that CONFIG_BATMAN_ADV_DEBUG must be activated to have the
debug logs compiled in.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Sat, 26 Jun 2010 00:36:45 +0000 (02:36 +0200)]
Staging: batman-adv: Remove dependency to PROCFS
It is not need to depend on it as procfs support was removed during the
transition to sysfs.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Sat, 26 Jun 2010 00:36:26 +0000 (02:36 +0200)]
Staging: batman-adv: Allow to build it inside the kernel
We must use the user supplied information about how the code should be
compiled instead of always trying to build it as module.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Fri, 25 Jun 2010 22:28:25 +0000 (00:28 +0200)]
Staging: batman-adv: fix early debugfs deinitialization
The debugfs files are initialized at load time only but would get
deinitialized when the module changed in it deactivate (sleeping)
state. As a consequence the debugfs files are not accessible
anymore.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Fri, 25 Jun 2010 22:28:24 +0000 (00:28 +0200)]
Staging: batman-adv: Add include guards to all header files
We include different header files indirectly to the same source file.
This creates weird compiler errors from time to time. Include guards
should prefend that functions/variables/... gets redefined by itself.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Fri, 25 Jun 2010 22:28:22 +0000 (00:28 +0200)]
Staging: batman-adv: Add sysfs abi documentation about bonding
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Fri, 25 Jun 2010 22:28:23 +0000 (00:28 +0200)]
Staging: batman-adv: adapting source version to revised versioning scheme
The new versioning scheme looks like this:
* the trunk will simply be named "devel" followed by a revision number
* the upcoming release branch will be "maint" followed by a revision
number
* the releases will carry their respective names (e.g. 2010.0.0)
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Wunderlich [Fri, 25 Jun 2010 22:28:20 +0000 (00:28 +0200)]
Staging: batman-adv: Lower resolution for timeouts
It is enough for our timeouts to keep them in seconds instead of miliseconds.
With a too high resolution, we might even risk an integer overflow, so this
patch should make things more safe.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Fri, 25 Jun 2010 22:28:21 +0000 (00:28 +0200)]
Staging: batman-adv: replace manual calculation by msecs_to_jiffies() for better readability
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Lüssing [Fri, 25 Jun 2010 22:28:19 +0000 (00:28 +0200)]
Staging: batman-adv: Avoid rounding issues for local hna timeout
With the current default values, this patch is not critical, as
LOCAL_HNA_TIMEOUT is a multiple of 1000 anyway. However, if someone
would like to change this #define, the person could have some
unexpected rounding issues. Therefore doing the multiplication before
the division now.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Antonio Quartulli [Fri, 25 Jun 2010 22:28:18 +0000 (00:28 +0200)]
Staging: batman-adv: Convert names from Java to C style
Useless but meaningfull patch that converts JavaStyle names into c_style
Signed-off-by: Antonio Quartulli <ordex@ritirata.org>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
H Hartley Sweeten [Fri, 25 Jun 2010 17:33:34 +0000 (10:33 -0700)]
Staging: dt3155: remove unused 32-bit and 8-bit global registers
All of the board 32-bit registers and 8-bit i2c registers are either read before
writing to them or they are just written to with a new value. There is no reason
to keep a 'local' copy of any of them.
As a first step to removing them, get rid of all the ones that are not used in
the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / profile / ivi / kernel-x86-ivi.git / log