Andreas Gruenbacher [Wed, 22 Jun 2016 21:57:25 +0000 (23:57 +0200)]
posix_acl: Add set_posix_acl
Factor out part of posix_acl_xattr_set into a common function that takes
a posix_acl, which nfsd can also call.
The prototype already exists in include/linux/posix_acl.h.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Takashi Iwai [Fri, 24 Jun 2016 13:15:26 +0000 (15:15 +0200)]
ALSA: dummy: Fix a use-after-free at closing
syzkaller fuzzer spotted a potential use-after-free case in snd-dummy
driver when hrtimer is used as backend:
> ==================================================================
> BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr
ffff88005e5b6f68
> Read of size 8 by task syz-executor/8984
> =============================================================================
> BUG kmalloc-192 (Not tainted): kasan: bad access detected
> -----------------------------------------------------------------------------
>
> Disabling lock debugging due to kernel taint
> INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=
18446705582212484632
> ....
> [< none >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464
> ....
> INFO: Freed in 0xfffd8e09 age=
18446705496313138713 cpu=
2164287125 pid=-1
> [< none >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481
> ....
> Call Trace:
> [<
ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333
> [< inline >] rb_set_parent include/linux/rbtree_augmented.h:111
> [< inline >] __rb_erase_augmented include/linux/rbtree_augmented.h:218
> [<
ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427
> [<
ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86
> [<
ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903
> [< inline >] remove_hrtimer kernel/time/hrtimer.c:945
> [<
ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046
> [<
ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066
> [<
ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417
> [<
ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507
> [<
ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106
> [<
ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956
> [<
ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974
> [< inline >] snd_pcm_stop sound/core/pcm_native.c:1139
> [<
ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784
> [<
ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805
> [<
ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976
> [<
ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020
> [<
ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693
> [<
ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483
> .....
A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which
is called certainly before other blocking ops.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Fri, 24 Jun 2016 13:13:16 +0000 (15:13 +0200)]
ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixup
See: https://bugzilla.redhat.com/show_bug.cgi?id=1349539
See: https://bugzilla.kernel.org/show_bug.cgi?id=120961
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jan Beulich [Fri, 24 Jun 2016 09:13:34 +0000 (03:13 -0600)]
xen-pciback: return proper values during BAR sizing
Reads following writes with all address bits set to 1 should return all
changeable address bits as one, not the BAR size (nor, as was the case
for the upper half of 64-bit BARs, the high half of the region's end
address). Presumably this didn't cause any problems so far because
consumers use the value to calculate the size (usually via val & -val),
and do nothing else with it.
But also consider the exception here: Unimplemented BARs should always
return all zeroes.
And finally, the check for whether to return the sizing address on read
for the ROM BAR should ignore all non-address bits, not just the ROM
Enable one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Woodrow Shen [Fri, 24 Jun 2016 07:58:34 +0000 (15:58 +0800)]
ALSA: hda - Fix the headset mic jack detection on Dell machine
The new Dell laptop with codec 3246 can't detect headset mic when
headset was inserted on the machine. So adding pin configurations
into quirk table makes headset mic work correctly.
Codec: Realtek ALC3246
Vendor Id: 0x10ec0256
Subsystem Id: 0x10280781
Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Scott Bauer [Thu, 23 Jun 2016 14:59:47 +0000 (08:59 -0600)]
HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands
This patch validates the num_values parameter from userland during the
HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set
to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter
leading to a heap overflow.
Cc: stable@vger.kernel.org
Signed-off-by: Scott Bauer <sbauer@plzdonthack.me>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tejun Heo [Thu, 16 Jun 2016 19:35:04 +0000 (15:35 -0400)]
sched/core: Allow kthreads to fall back to online && !active cpus
During CPU hotplug, CPU_ONLINE callbacks are run while the CPU is
online but not active. A CPU_ONLINE callback may create or bind a
kthread so that its cpus_allowed mask only allows the CPU which is
being brought online. The kthread may start executing before the CPU
is made active and can end up in select_fallback_rq().
In such cases, the expected behavior is selecting the CPU which is
coming online; however, because select_fallback_rq() only chooses from
active CPUs, it determines that the task doesn't have any viable CPU
in its allowed mask and ends up overriding it to cpu_possible_mask.
CPU_ONLINE callbacks should be able to put kthreads on the CPU which
is coming online. Update select_fallback_rq() so that it follows
cpu_online() rather than cpu_active() for kthreads.
Reported-by: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Tested-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20160616193504.GB3262@mtj.duckdns.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Konstantin Khlebnikov [Thu, 16 Jun 2016 12:57:15 +0000 (15:57 +0300)]
sched/fair: Do not announce throttled next buddy in dequeue_task_fair()
Hierarchy could be already throttled at this point. Throttled next
buddy could trigger a NULL pointer dereference in pick_next_task_fair().
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/146608183552.21905.15924473394414832071.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Konstantin Khlebnikov [Thu, 16 Jun 2016 12:57:01 +0000 (15:57 +0300)]
sched/fair: Initialize throttle_count for new task-groups lazily
Cgroup created inside throttled group must inherit current throttle_count.
Broken throttle_count allows to nominate throttled entries as a next buddy,
later this leads to null pointer dereference in pick_next_task_fair().
This patch initialize cfs_rq->throttle_count at first enqueue: laziness
allows to skip locking all rq at group creation. Lazy approach also allows
to skip full sub-tree scan at throttling hierarchy (not in this patch).
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Link: http://lkml.kernel.org/r/146608182119.21870.8439834428248129633.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Paolo Bonzini [Tue, 21 Jun 2016 16:52:17 +0000 (18:52 +0200)]
locking/static_key: Fix concurrent static_key_slow_inc()
The following scenario is possible:
CPU 1 CPU 2
static_key_slow_inc()
atomic_inc_not_zero()
-> key.enabled == 0, no increment
jump_label_lock()
atomic_inc_return()
-> key.enabled == 1 now
static_key_slow_inc()
atomic_inc_not_zero()
-> key.enabled == 1, inc to 2
return
** static key is wrong!
jump_label_update()
jump_label_unlock()
Testing the static key at the point marked by (**) will follow the
wrong path for jumps that have not been patched yet. This can
actually happen when creating many KVM virtual machines with userspace
LAPIC emulation; just run several copies of the following program:
#include <fcntl.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <linux/kvm.h>
int main(void)
{
for (;;) {
int kvmfd = open("/dev/kvm", O_RDONLY);
int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0);
close(ioctl(vmfd, KVM_CREATE_VCPU, 1));
close(vmfd);
close(kvmfd);
}
return 0;
}
Every KVM_CREATE_VCPU ioctl will attempt a static_key_slow_inc() call.
The static key's purpose is to skip NULL pointer checks and indeed one
of the processes eventually dereferences NULL.
As explained in the commit that introduced the bug:
706249c222f6 ("locking/static_keys: Rework update logic")
jump_label_update() needs key.enabled to be true. The solution adopted
here is to temporarily make key.enabled == -1, and use go down the
slow path when key.enabled <= 0.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # v4.3+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
706249c222f6 ("locking/static_keys: Rework update logic")
Link: http://lkml.kernel.org/r/1466527937-69798-1-git-send-email-pbonzini@redhat.com
[ Small stylistic edits to the changelog and the code. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Fri, 24 Jun 2016 05:48:48 +0000 (22:48 -0700)]
Merge tag 'upstream-4.7-rc5' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS fixes from Richard Weinberger:
"This contains fixes for two critical bugs in UBI and UBIFS:
- fix the possibility of losing data upon a power cut when UBI tries
to recover from a write error
- fix page migration on UBIFS. It turned out that the default page
migration function is not suitable for UBIFS"
* tag 'upstream-4.7-rc5' of git://git.infradead.org/linux-ubifs:
UBIFS: Implement ->migratepage()
mm: Export migrate_page_move_mapping and migrate_page_copy
ubi: Make recover_peb power cut aware
gpio: make library immune to error pointers
gpio: make sure gpiod_to_irq() returns negative on NULL desc
gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
Luis de Bethencourt [Wed, 8 Jun 2016 16:02:32 +0000 (17:02 +0100)]
cifs: check hash calculating succeeded
calc_lanman_hash() could return -ENOMEM or other errors, we should check
that everything went fine before using the calculated key.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jerome Marchand [Thu, 26 May 2016 09:52:25 +0000 (11:52 +0200)]
cifs: dynamic allocation of ntlmssp blob
In sess_auth_rawntlmssp_authenticate(), the ntlmssp blob is allocated
statically and its size is an "empirical" 5*sizeof(struct
_AUTHENTICATE_MESSAGE) (320B on x86_64). I don't know where this value
comes from or if it was ever appropriate, but it is currently
insufficient: the user and domain name in UTF16 could take 1kB by
themselves. Because of that, build_ntlmssp_auth_blob() might corrupt
memory (out-of-bounds write). The size of ntlmssp_blob in
SMB2_sess_setup() is too small too (sizeof(struct _NEGOTIATE_MESSAGE)
+ 500).
This patch allocates the blob dynamically in
build_ntlmssp_auth_blob().
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Jerome Marchand [Thu, 26 May 2016 09:52:24 +0000 (11:52 +0200)]
cifs: use CIFS_MAX_DOMAINNAME_LEN when converting the domain name
Currently in build_ntlmssp_auth_blob(), when converting the domain
name to UTF16, CIFS_MAX_USERNAME_LEN limit is used. It should be
CIFS_MAX_DOMAINNAME_LEN. This patch fixes this.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Jeff Layton [Tue, 24 May 2016 10:27:44 +0000 (06:27 -0400)]
cifs: stuff the fl_owner into "pid" field in the lock request
Right now, we send the tgid cross the wire. What we really want to send
though is a hashed fl_owner_t since samba treats this field as a generic
lockowner.
It turns out that because we enforce and release locks locally before
they are ever sent to the server, this patch makes no difference in
behavior. Still, setting OFD locks on the server using the process
pid seems wrong, so I think this patch still makes sense.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Linus Torvalds [Fri, 24 Jun 2016 04:35:12 +0000 (21:35 -0700)]
Merge tag 'drm-fixes-for-v4.7-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"This is the drm fixes tree for 4.7-rc5.
It's a bit larger than normal, due to fixes for production AMD Polaris
GPUs. We only merged support for these in 4.7-rc1 so it would be good
if we got all the fixes into final. The changes don't hit any other
hardware.
Other than the amdgpu Polaris changes:
- A single fix for atomic modesetting WARN
- Nouveau fix for when fbdev is disabled
- i915 fixes for FBC on Haswell and displayport regression
- Exynos fix for a display panel regression and some other minor changes
- Atmel fixes for scaling and OF graph interaction
- Allwiinner build, warning and probing fixes
- AMD GPU non-polaris fix for num_rbs and some minor fixes
Also I've just moved house, and my new place is Internet challenged
due to incompetent incumbent ISPs, hopefully sorted out in a couple of
weeks, so I might not be too responsive over the next while. It also
helps Daniel is on holidays for those couple of weeks as well"
* tag 'drm-fixes-for-v4.7-rc5' of git://people.freedesktop.org/~airlied/linux: (38 commits)
drm/atomic: Make drm_atomic_legacy_backoff reset crtc->acquire_ctx
drm/nouveau: fix for disabled fbdev emulation
drm/i915/fbc: Disable on HSW by default for now
drm/i915: Revert DisplayPort fast link training feature
drm/amd/powerplay: enable clock stretch feature for polaris
drm/amdgpu/gfx8: update golden setting for polaris10
drm/amd/powerplay: enable avfs feature for polaris
drm/amdgpu/atombios: add avfs struct for Polaris10/11
drm/amd/powerplay: add avfs related define for polaris
drm/amd/powrplay: enable stutter_mode for polaris.
drm/amd/powerplay: disable UVD SMU handshake for MCLK.
drm/amd/powerplay: initialize variables which were missed.
drm/amd/powerplay: enable PowerContainment feature for polaris10/11.
drm/amd/powerplay: need to notify system bios pcie device ready
drm/amd/powerplay: fix bug that function parameter was incorect.
drm/amd/powerplay: fix logic error.
drm: atmel-hlcdc: Fix OF graph parsing
drm: atmel-hlcdc: actually disable scaling when no scaling is required
drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value
drm/amdgpu: precedence bug in amdgpu_device_init()
...
Linus Torvalds [Fri, 24 Jun 2016 03:59:14 +0000 (20:59 -0700)]
Merge tag 'pci-v4.7-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Here's a small fix for v4.7. This problem was actually introduced in
v4.6 when we unified Kconfig, making PCIe support available everywhere
including sparc, where config reads into unaligned buffers cause
warnings. This fix is from Dave Miller.
As a reminder, any future PCI fixes for v4.7 will probably come from
Alex Williamson, since I'll be on vacation for most of the rest of
this cycle. I should be back about the time the merge window opens"
* tag 'pci-v4.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix unaligned accesses in VC code
Maarten Lankhorst [Thu, 23 Jun 2016 11:45:06 +0000 (13:45 +0200)]
drm/atomic: Make drm_atomic_legacy_backoff reset crtc->acquire_ctx
Atomic updates may acquire more state than initially locked through
drm_modeset_lock_crtc, running with heavy stress can cause a
WARN_ON(crtc->acquire_ctx) in drm_modeset_lock_crtc:
[ 601.491296] ------------[ cut here ]------------
[ 601.491366] WARNING: CPU: 0 PID: 2411 at
drivers/gpu/drm/drm_modeset_lock.c:191 drm_modeset_lock_crtc+0xeb/0xf0 [drm]
[ 601.491369] Modules linked in: drm i915 drm_kms_helper
[ 601.491414] CPU: 0 PID: 2411 Comm: kms_cursor_lega Tainted: G U 4.7.0-rc4-patser+ #4798
[ 601.491417] Hardware name: Intel Corporation Skylake Client
[ 601.491420]
0000000000000000 ffff88044d153c98 ffffffff812ead28 0000000000000000
[ 601.491425]
0000000000000000 ffff88044d153cd8 ffffffff810868e6 000000bf58058030
[ 601.491431]
ffff880088b415e8 ffff880458058030 ffff88008a271548 ffff88008a271568
[ 601.491436] Call Trace:
[ 601.491443] [<
ffffffff812ead28>] dump_stack+0x4d/0x65
[ 601.491447] [<
ffffffff810868e6>] __warn+0xc6/0xe0
[ 601.491452] [<
ffffffff81086968>] warn_slowpath_null+0x18/0x20
[ 601.491472] [<
ffffffffc00d4ffb>] drm_modeset_lock_crtc+0xeb/0xf0 [drm]
[ 601.491491] [<
ffffffffc00c5526>] drm_mode_cursor_common+0x66/0x180 [drm]
[ 601.491509] [<
ffffffffc00c91cc>] drm_mode_cursor_ioctl+0x3c/0x40 [drm]
[ 601.491524] [<
ffffffffc00bc94d>] drm_ioctl+0x14d/0x530 [drm]
[ 601.491540] [<
ffffffffc00c9190>] ? drm_mode_setcrtc+0x520/0x520 [drm]
[ 601.491545] [<
ffffffff81176aeb>] ? handle_mm_fault+0x106b/0x1430
[ 601.491550] [<
ffffffff81108441>] ? stop_one_cpu+0x61/0x70
[ 601.491556] [<
ffffffff811bb71d>] do_vfs_ioctl+0x8d/0x570
[ 601.491560] [<
ffffffff81290d7e>] ? security_file_ioctl+0x3e/0x60
[ 601.491565] [<
ffffffff811bbc74>] SyS_ioctl+0x74/0x80
[ 601.491571] [<
ffffffff810e321c>] ? posix_get_monotonic_raw+0xc/0x10
[ 601.491576] [<
ffffffff8175b11b>] entry_SYSCALL_64_fastpath+0x13/0x8f
[ 601.491581] ---[ end trace
56f3d3d85f000d00 ]---
For good measure, test mode_config.acquire_ctx too, although this should
never happen.
Testcase: kms_cursor_legacy
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 24 Jun 2016 00:51:12 +0000 (10:51 +1000)]
Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
A bit bigger than I would normally like, but most of the large changes are
for polaris support and since polaris went upstream in 4.7, I'd like
to get the fixes in so it's in good shape when the hw becomes available.
The major changes only touch the polaris code so there is little chance
for regressions on other asics. The rest are just the usual collection
of bug fixes.
* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: enable clock stretch feature for polaris
drm/amdgpu/gfx8: update golden setting for polaris10
drm/amd/powerplay: enable avfs feature for polaris
drm/amdgpu/atombios: add avfs struct for Polaris10/11
drm/amd/powerplay: add avfs related define for polaris
drm/amd/powrplay: enable stutter_mode for polaris.
drm/amd/powerplay: disable UVD SMU handshake for MCLK.
drm/amd/powerplay: initialize variables which were missed.
drm/amd/powerplay: enable PowerContainment feature for polaris10/11.
drm/amd/powerplay: need to notify system bios pcie device ready
drm/amd/powerplay: fix bug that function parameter was incorect.
drm/amd/powerplay: fix logic error.
drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value
drm/amdgpu: precedence bug in amdgpu_device_init()
drm/amdgpu: fix num_rbs exposed to userspace (v2)
drm/amdgpu: missing bounds check in amdgpu_set_pp_force_state()
Sinclair Yeh [Fri, 24 Jun 2016 00:37:34 +0000 (17:37 -0700)]
Input: vmmouse - remove port reservation
The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This
causes the port to be reserved by the APCI module as the system comes up,
making it unavailable to be reserved again by other drivers, thus
preserving this VMWare port for special use in a VMWare guest.
This port is designed to be shared among multiple VMWare services, such as
the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port
on its own.
The VMWare non-EFI BIOS does not do this to preserve compatibility with
existing/legacy VMs. It is known that there is small chance a VM may be
configured such that these ports get reserved by other non-VMWare devices,
and if this ever happens, the result is undefined.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: <stable@vger.kernel.org> # 4.1-
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dave Airlie [Fri, 24 Jun 2016 00:35:03 +0000 (10:35 +1000)]
Merge branch 'exynos-drm-fixes' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
Since HW trigger mode was suppoted we have faced with a issue
that Display panel didn't work correctly when trigger mode was changed
in booting time.
For this, we keep trigger mode with SW trigger mode in default mode
like we did before.
However, we will need to consider PSR(Panel Self Reflash) mode to resolve
this issue fundamentally later.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: use logical AND in exynos_drm_plane_check_size()
drm/exynos: remove superfluous inclusions of fbdev header
drm/exynos: g2d: drop the _REG postfix from the stride defines
drm/exynos: don't use HW trigger for Exynos5420/5422/5800
drm/exynos: fimd: don't set .has_hw_trigger in s3c6400 driver data
drm/exynos: dp: Fix NULL pointer dereference due uninitialized connector
Dave Airlie [Fri, 24 Jun 2016 00:34:49 +0000 (10:34 +1000)]
Merge tag 'drm-atmel-hlcdc-fixes/for-4.7-rc5' of github.com:bbrezillon/linux-at91 into drm-fixes
Two bug fixes for the atmel-hlcdc driver.
* tag 'drm-atmel-hlcdc-fixes/for-4.7-rc5' of github.com:bbrezillon/linux-at91:
drm: atmel-hlcdc: Fix OF graph parsing
drm: atmel-hlcdc: actually disable scaling when no scaling is required
Dave Airlie [Fri, 24 Jun 2016 00:34:35 +0000 (10:34 +1000)]
Merge tag 'sunxi-drm-fixes-for-4.7' of https://git./linux/kernel/git/mripard/linux into drm-fixes
Allwinner sun4i DRM driver fixes
A bunch of fixes that address:
- Compilation errors in various corner cases
- Move to helpers
- Fix the pixel clock computation
- Fix our panel probe
* tag 'sunxi-drm-fixes-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm: sun4i: do cleanup if RGB output init fails
drm/sun4i: Convert to connector register helpers
drm/sun4i: remove simplefb at probe
drm/sun4i: rgb: panel is an error pointer
drm/sun4i: defer only if we didn't find our panel
drm/sun4i: rgb: Validate the clock rate
drm/sun4i: request exact rates to our parents
drm: sun4i: fix probe error handling
drm: sun4i: print DMA address correctly
drm/sun4i: add COMMON_CLK dependency
Dave Airlie [Fri, 24 Jun 2016 00:32:30 +0000 (10:32 +1000)]
Merge tag 'drm-intel-fixes-2016-06-22' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Hi Dave, just a couple of display fixes, both stable stuff. Maybe we'll
be able to enable fbc by default one day.
* tag 'drm-intel-fixes-2016-06-22' of git://anongit.freedesktop.org/drm-intel:
drm/i915/fbc: Disable on HSW by default for now
drm/i915: Revert DisplayPort fast link training feature
Dave Airlie [Fri, 24 Jun 2016 00:16:37 +0000 (10:16 +1000)]
Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-fixes
* 'linux-4.7' of git://github.com/skeggsb/linux:
drm/nouveau: fix for disabled fbdev emulation
Dmitrii Tcvetkov [Mon, 20 Jun 2016 10:52:14 +0000 (13:52 +0300)]
drm/nouveau: fix for disabled fbdev emulation
Hello,
after this commit:
commit
f045f459d925138fe7d6193a8c86406bda7e49da
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Thu Jun 2 12:23:31 2016 +1000
drm/nouveau/fbcon: fix out-of-bounds memory accesses
kernel started to oops when loading nouveau module when using GTX 780 Ti
video adapter. This patch fixes the problem.
Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591
Signed-off-by: Dmitrii Tcvetkov <demfloro@demfloro.ru>
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes:
f045f459d925 ("nouveau_fbcon_init()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Chanwoo Choi [Thu, 23 Jun 2016 02:18:43 +0000 (11:18 +0900)]
PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failed
This patch sends the DEVFREQ_POSTCHANGE notification when
devfreq->profile->targer() is failed. The PRECHANGE/POSTCHANGE
should be paired.
Fixes:
0fe3a66410a3 (PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier)
Reported-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mike Galbraith [Thu, 23 Jun 2016 06:45:42 +0000 (08:45 +0200)]
cpufreq: pcc-cpufreq: Fix doorbell.access_width
Commit
920de6ebfab8 (ACPICA: Hardware: Enhance
acpi_hw_validate_register() with access_width/bit_offset awareness)
apparently exposed a latent bug, doorbell.access_width is initialized
to 64, but per Lv Zheng, it should be 4, and indeed, making that
change does bring pcc-cpufreq back to life.
Fixes:
920de6ebfab8 (ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness)
Suggested-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dmitry Torokhov [Tue, 21 Jun 2016 23:09:00 +0000 (16:09 -0700)]
Input: elantech - add more IC body types to the list
The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and
according to Elan both 11 and 12 are valid IC types and should be
identified as hw_version 4.
Reported-by: Patrick Lessard <Patrick.Lessard@cogeco.com>
Tested-by: Patrick Lessard <Patrick.Lessard@cogeco.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ping Cheng [Thu, 23 Jun 2016 17:55:11 +0000 (10:55 -0700)]
Input: wacom_w8001 - ignore invalid pen data packets
ThinkPad X60 Tablet PC (pen only device) sometime posts
packets that are larger than W8001_PKTLEN_TPCPEN.
Reported-by: Chris J Arges <christopherarges@gmail.com>
Tested-by: Chris J Arges <christopherarges@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Thu, 23 Jun 2016 19:20:01 +0000 (12:20 -0700)]
x86: avoid avoid passing around 'thread_info' in stack dumping code
None of the code actually wants a thread_info, it all wants a
task_struct, and it's just converting to a thread_info pointer much too
early.
No semantic change.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 23 Jun 2016 19:11:17 +0000 (12:11 -0700)]
locking: avoid passing around 'thread_info' in mutex debugging code
None of the code actually wants a thread_info, it all wants a
task_struct, and it's just converting back and forth between the two
("ti->task" to get the task_struct from the thread_info, and
"task_thread_info(task)" to go the other way).
No semantic change.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ping Cheng [Thu, 23 Jun 2016 17:54:17 +0000 (10:54 -0700)]
Input: wacom_w8001 - w8001_MAX_LENGTH should be 13
Somehow the patch that added two-finger touch support forgot to update
W8001_MAX_LENGTH from 11 to 13.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Chandan Rajendra [Thu, 23 Jun 2016 09:46:44 +0000 (15:16 +0530)]
Btrfs: Force stripesize to the value of sectorsize
Btrfs code currently assumes stripesize to be same as
sectorsize. However Btrfs-progs (until commit
df05c7ed455f519e6e15e46196392e4757257305) has been setting
btrfs_super_block->stripesize to a value of 4096.
This commit makes sure that the value of btrfs_super_block->stripesize
is a power of 2. Later, it unconditionally sets btrfs_root->stripesize
to sectorsize.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Wang Xiaoguang [Wed, 22 Jun 2016 01:57:01 +0000 (09:57 +0800)]
btrfs: fix disk_i_size update bug when fallocate() fails
When doing truncate operation, btrfs_setsize() will first call
truncate_setsize() to set new inode->i_size, but if later
btrfs_truncate() fails, btrfs_setsize() will call
"i_size_write(inode, BTRFS_I(inode)->disk_i_size)" to reset the
inmemory inode size, now bug occurs. It's because for truncate
case btrfs_ordered_update_i_size() directly uses inode->i_size
to update BTRFS_I(inode)->disk_i_size, indeed we should use the
"offset" argument to update disk_i_size. Here is the call graph:
==>btrfs_truncate()
====>btrfs_truncate_inode_items()
======>btrfs_ordered_update_i_size(inode, last_size, NULL);
Here btrfs_ordered_update_i_size()'s offset argument is last_size.
And below test case can reveal this bug:
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=100
dev=$(losetup --show -f fs.img)
mkdir -p /mnt/mntpoint
mkfs.btrfs -f $dev
mount $dev /mnt/mntpoint
cd /mnt/mntpoint
echo "workdir is: /mnt/mntpoint"
blocksize=$((128 * 1024))
dd if=/dev/zero of=testfile bs=$blocksize count=1
sync
count=$((17*1024*1024*1024/blocksize))
echo "file size is:" $((count*blocksize))
for ((i = 1; i <= $count; i++)); do
i=$((i + 1))
dst_offset=$((blocksize * i))
xfs_io -f -c "reflink testfile 0 $dst_offset $blocksize"\
testfile > /dev/null
done
sync
truncate --size 0 testfile
ls -l testfile
du -sh testfile
exit
In this case, truncate operation will fail for enospc reason and
"du -sh testfile" returns value greater than 0, but testfile's
size is 0, we need to reflect correct inode->i_size.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Liu Bo [Sat, 18 Jun 2016 02:16:21 +0000 (19:16 -0700)]
Btrfs: fix error handling in map_private_extent_buffer
map_private_extent_buffer() can return -EINVAL in two different cases,
1. when the requested contents span two pages if nodesize is larger
than pagesize,
2. when it detects something insane.
The 2nd one used to be only a WARN_ON(1), and we decided to return a error
to callers, but we didn't fix up all its callers, which will be
addressed by this patch.
Without this, btrfs may end up with 'general protection', ie.
reading invalid memory.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Wei Yongjun [Fri, 17 Jun 2016 17:20:40 +0000 (17:20 +0000)]
Btrfs: fix error return code in btrfs_init_test_fs()
Fix to return a negative error code from the kern_mount() error handling
case instead of 0(ret is set to 0 by register_filesystem), as done
elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Cameron Gutman [Thu, 23 Jun 2016 17:24:42 +0000 (10:24 -0700)]
Input: xpad - fix oops when attaching an unknown Xbox One gamepad
Xbox One controllers have multiple interfaces which all have the
same class, subclass, and protocol. One of the these interfaces
has only a single endpoint. When Xpad attempts to bind to this
interface, it causes an oops when trying initialize the output URB
by trying to access the second endpoint's descriptor.
This situation was avoided for known Xbox One devices by checking
the XTYPE constant associated with the VID and PID tuple. However,
this breaks when new or previously unknown Xbox One controllers
are attached to the system.
This change addresses the problem by deriving the XTYPE for Xbox
One controllers based on the interface protocol before checking
the interface number.
Fixes:
1a48ff81b391 ("Input: xpad - add support for Xbox One controllers")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Doug Ledford [Thu, 23 Jun 2016 16:22:33 +0000 (12:22 -0400)]
Merge branches '4.7-rc-misc', 'hfi1-fixes', 'i40iw-rc-fixes' and 'mellanox-rc-fixes' into k.o/for-4.7-rc
Bart Van Assche [Thu, 23 Jun 2016 07:35:48 +0000 (09:35 +0200)]
IB/srpt: Reduce QP buffer size
The memory needed for the send and receive queues associated with
a QP is proportional to the max_sge parameter. The current value
of that parameter is such that with an mlx4 HCA the QP buffer size
is 8 MB. Since DMA is used for communication between HCA and CPU
that buffer either has to be allocated coherently or map_single()
must succeed for that buffer. Since large contiguous allocations
are fragile and since the maximum segment size for e.g. swiotlb
is 256 KB, reduce the max_sge parameter. This patch avoids that
the following text appears on the console after SRP logout and
relogin on a system equipped with multiple IB HCAs:
mlx4_core 0000:05:00.0: swiotlb buffer is full (sz: 8388608 bytes)
swiotlb: coherent allocation failed for device 0000:05:00.0 size=8388608
CPU: 11 PID: 148 Comm: kworker/11:1 Not tainted 4.7.0-rc4-dbg+ #1
Call Trace:
[<
ffffffff812c6d35>] dump_stack+0x67/0x92
[<
ffffffff812efe71>] swiotlb_alloc_coherent+0x141/0x150
[<
ffffffff810458be>] x86_swiotlb_alloc_coherent+0x3e/0x50
[<
ffffffffa03861fa>] mlx4_buf_direct_alloc.isra.5+0x9a/0x120 [mlx4_core]
[<
ffffffffa0386545>] mlx4_buf_alloc+0x165/0x1a0 [mlx4_core]
[<
ffffffffa035053d>] create_qp_common.isra.29+0x57d/0xff0 [mlx4_ib]
[<
ffffffffa03510da>] mlx4_ib_create_qp+0x12a/0x3f0 [mlx4_ib]
[<
ffffffffa031154a>] ib_create_qp+0x3a/0x250 [ib_core]
[<
ffffffffa055dd4b>] srpt_cm_handler+0x4bb/0xcad [ib_srpt]
[<
ffffffffa02c1ab0>] cm_process_work+0x20/0xf0 [ib_cm]
[<
ffffffffa02c3640>] cm_work_handler+0x1ac0/0x2059 [ib_cm]
[<
ffffffff810737ed>] process_one_work+0x19d/0x490
[<
ffffffff81073b29>] worker_thread+0x49/0x490
[<
ffffffff8107a0ea>] kthread+0xea/0x100
[<
ffffffff815b25af>] ret_from_fork+0x1f/0x40
Fixes:
b99f8e4d7bcd ("IB/srpt: convert to the generic RDMA READ/WRITE API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shiraz Saleem [Tue, 14 Jun 2016 21:54:19 +0000 (16:54 -0500)]
i40iw: Enable level-1 PBL for fast memory registration
Set the chunk_size to enable level-1 PBL support when the fast memory
page count is more than one.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Faisal Latif [Tue, 14 Jun 2016 21:54:18 +0000 (16:54 -0500)]
i40iw: Return correct max_fast_reg_page_list_len
Return correct value for max_fast_reg_page_list_len from
i40iw_query_device().
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Faisal Latif [Tue, 14 Jun 2016 21:54:17 +0000 (16:54 -0500)]
i40iw: Correct status check on i40iw_get_pble
i40iw_get_pble returns 0 on success. Correct the check on return
code.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Shiraz Saleem [Tue, 14 Jun 2016 21:54:16 +0000 (16:54 -0500)]
i40iw: Correct CQ arming
CQ is armed for solicited events only, ignoring other notification
flags. Correct this by arming for next and arming for solicited
event if IB_CQ_SOLICITED is set. Also protect CQ shadow area update
with spinlock.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mike Marciniszyn [Wed, 22 Jun 2016 20:29:33 +0000 (13:29 -0700)]
IB/rdmavt: Correct qp_priv_alloc() return value test
The current drivers return errors from this calldown
wrapped in an ERR_PTR().
The rdmavt code incorrectly tests for NULL.
The code is fixed to use IS_ERR() and change ret according
to the driver return value.
Cc: Stable <stable@vger.kernel.org> # 4.6+
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ashutosh Dixit [Sat, 18 Jun 2016 02:17:54 +0000 (19:17 -0700)]
IB/hfi1: Don't zero out qp->s_ack_queue in rvt_reset_qp
Since rvt_reset_qp already zero's out qp->s_ack_queue head and tail
pointers, there is no need to zero out qp->s_ack_queue itself.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mike Marciniszyn [Sat, 18 Jun 2016 02:17:49 +0000 (19:17 -0700)]
IB/hfi1: Fix deadlock with txreq allocation slow path
A failure in the get_txreq() inline will result in a
slow path retry using __get_txreq().
__get_txreq() attempts to procure the qp s_lock, which
is already held in all callers.
Fix by deleting the s_lock maintenance in __get_txreq()
and add sparse syntax hooks to future proof the code.
Cc: Stable <stable@vger.kernel.org> # 4.6+
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Chuck Lever [Wed, 22 Jun 2016 14:27:32 +0000 (17:27 +0300)]
IB/mlx4: Prevent cross page boundary allocation
Prevent cross page boundary allocation by allocating
new page, this is required to be aligned with ConnectX-3 HW
requirements.
Not doing that might cause to "RDMA read local protection" error.
Fixes:
1b2cd0fc673c ('IB/mlx4: Support the new memory registration API')
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Dotan Barak [Wed, 22 Jun 2016 14:27:31 +0000 (17:27 +0300)]
IB/mlx4: Fix memory leak if QP creation failed
When RC, UC, or RAW QPs are created, a qp object is allocated (kzalloc).
If at a later point (in procedure create_qp_common) the qp creation fails,
this qp object must be freed.
Fixes:
1ffeb2eb8be99 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yishai Hadas [Wed, 22 Jun 2016 14:27:30 +0000 (17:27 +0300)]
IB/mlx4: Verify port number in flow steering create flow
In procedure mlx4_ib_create_flow, passing an invalid port number
will cause an out-of-bounds array access. Data passed to this procedure
can come from user-space. Therefore, need to validate port number
before proceeding onwards.
Note that we check against the number of physical ports declared at
the verbs (ib core) level; When bonding is active, the verbs level
sees one physical port, even though the low-level driver sees two ports.
Fixes:
f77c0162a339 ("IB/mlx4: Add receive flow steering support")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yishai Hadas [Wed, 22 Jun 2016 14:27:29 +0000 (17:27 +0300)]
IB/mlx4: Fix error flow when sending mads under SRIOV
Fix mad send error flow to prevent double freeing address handles,
and leaking tx_ring entries when SRIOV is active.
If ib_mad_post_send fails, the address handle pointer in the tx_ring entry
must be set to NULL (or there will be a double-free) and tx_tail must be
incremented (or there will be a leak of tx_ring entries).
The tx_ring is handled the same way in the send-completion handler.
Fixes:
37bfc7c1e83f ("IB/mlx4: SR-IOV multiplex and demultiplex MADs")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yishai Hadas [Wed, 22 Jun 2016 14:27:28 +0000 (17:27 +0300)]
IB/mlx4: Fix the SQ size of an RC QP
When calculating the required size of an RC QP send queue, leave
enough space for masked atomic operations, which require more space than
"regular" atomic operation.
Fixes:
6fa8f719844b ("IB/mlx4: Add support for masked atomic operations")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.co.il>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Talat Batheesh [Wed, 22 Jun 2016 14:27:27 +0000 (17:27 +0300)]
IB/mlx5: Fix wrong naming of port_rcv_data counter
port_xmit_data is written instead of port_rcv_data.
Fixes:
3efd9a11212d ('IB/mlx5: Modify MAD reading counters method to use counter registers')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Eli Cohen [Wed, 22 Jun 2016 14:27:26 +0000 (17:27 +0300)]
IB/mlx5: Fix post send fence logic
If the caller specified IB_SEND_FENCE in the send flags of the work
request and no previous work request stated that the successive one
should be fenced, the work request would be executed without a fence.
This could result in RDMA read or atomic operations failure due to a MR
being invalidated. Fix this by adding the mlx5 enumeration for fencing
RDMA/atomic operations and fix the logic to apply this.
Fixes:
e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Maor Gottlieb [Wed, 22 Jun 2016 14:27:25 +0000 (17:27 +0300)]
IB/uverbs: Initialize ib_qp_init_attr with zeros
Initialize ib_qp_init_attr with zeros in order to avoid from garbage
in fields that won't be set with user values.
Fixes:
a060b5629ab06 ('IB/core: generic RDMA READ/WRITE API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Eli Cohen [Wed, 22 Jun 2016 14:27:24 +0000 (17:27 +0300)]
IB/core: Fix false search of the IB_SA_WELL_KNOWN_GUID
When virtualziation is supported, VFs may send SA MADs to a GID formed
by the concatenation of the subnet prefix with the
IB_SA_WELL_KNOWN_GUID. When a response is required, the current code
will search the local HCA's port for the received GID to figure out the
GID index of the entry containing this GID. However, since this is not a
real GID it will not be found and error will be printed.
We change the logic to check if the destination GID is this special GID
and avoid lookup in this case and use GID index 0.
Fixes:
a0c1b2a35087 ('IB/core: Support accessing SA in virtualized environment')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Alex Vesker [Wed, 22 Jun 2016 14:27:23 +0000 (17:27 +0300)]
IB/core: Fix RoCE v1 multicast join logic issue
During multicast join of RoCEv1, IGMP join state and max hop limit
were updated incorrectly. IGMP join should be sent and marked as
joined only on RoCEv2 after a successful join. Max hops should be
updated to the hop limit on RoCEv2 regardless of the join state.
Fixes:
bee3c3c91865 ('IB/cma: Join and leave multicast groups...')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Talat Batheesh [Wed, 22 Jun 2016 14:27:22 +0000 (17:27 +0300)]
IB/core: Fix no default GIDs when netdevice reregisters
Currently, when the netdevice returned by get_netdev is unregistered,
we delete all GIDs (including the default GIDs) and reset their
attributes. Therefore, when we re-register it, no default GIDs
will be assigned (as their "default GID") attribute will be reset.
Fixing this by keeping "default GID" attribute.
Fixes:
03db3a2d81e6 ('IB/core: Add RoCE GID table management')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
David Vrabel [Tue, 17 May 2016 14:54:50 +0000 (15:54 +0100)]
x86/xen: avoid m2p lookup when setting early page table entries
When page tables entries are set using xen_set_pte_init() during early
boot there is no page fault handler that could handle a fault when
performing an M2P lookup.
In 64 bit guests (usually dom0) early_ioremap() would fault in
xen_set_pte_init() because an M2P lookup faults because the MFN is in
MMIO space and not mapped in the M2P. This lookup is done to see if
the PFN in in the range used for the initial page table pages, so that
the PTE may be set as read-only.
The M2P lookup can be avoided by moving the check (and clear of RW)
earlier when the PFN is still available.
Reported-by: Kevin Moraga <kmoragas@riseup.net>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Pali Rohár [Fri, 17 Jun 2016 22:54:47 +0000 (00:54 +0200)]
hwmon: (dell-smm) Cache fan_type() calls and change fan detection
On more Dell machines (e.g. Dell Precision M3800) fan_type() call is too
expensive (CPU is too long in SMM mode) and cause kernel to hang. This is
bug in Dell SMM or BIOS.
This patch caches type for each fan (as it should not change) and changes
the way how fan presense is detected. First it try function fan_status()
as was before commit
f989e55452c7 ("i8k: Add support for fan labels"). And
if that fails fallback to fan_type(). *_status() functions can fail in case
fan is not currently accessible (e.g. present on GPU which is currently
turned off).
Reported-by: Tolga Cakir <cevelnet@gmail.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=112021
Cc: stable@vger.kernel.org # v4.0+, will need backport
Tested-by: Tolga Cakir <cevelnet@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rafael J. Wysocki [Thu, 23 Jun 2016 12:48:41 +0000 (14:48 +0200)]
Merge branch 'fixes' of https://git./linux/kernel/git/mzx/devfreq into pm-devfreq
Pull devfreq fixes for v4.7 from MyungJoo Ham.
* 'fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq:
PM / devfreq: fix initialization of current frequency in last status
PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
PM / devfreq: remove double put_device
PM / devfreq: fix double call put_device
PM / devfreq: fix duplicated kfree on devfreq pointer
PM / devfreq: devm_kzalloc to have dev pointer more precisely
Andrey Grodzovsky [Tue, 21 Jun 2016 18:26:36 +0000 (14:26 -0400)]
xen/pciback: Fix conf_space read/write overlap check.
Current overlap check is evaluating to false a case where a filter
field is fully contained (proper subset) of a r/w request. This
change applies classical overlap check instead to include all the
scenarios.
More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver
the logic is such that the entire confspace is read and written in 4
byte chunks. In this case as an example, CACHE_LINE_SIZE,
LATENCY_TIMER and PCI_BIST are arriving together in one call to
xen_pcibk_config_write() with offset == 0xc and size == 4. With the
exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length
== 1) is fully contained in the write request and hence is excluded
from write, which is incorrect.
Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <JBeulich@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Juergen Gross [Thu, 23 Jun 2016 05:12:27 +0000 (07:12 +0200)]
x86/xen: fix upper bound of pmd loop in xen_cleanhighmap()
xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper
bound of the loop setting non-kernel-image entries to zero should not
exceed the size of level2_kernel_pgt.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Ross Lagerwall [Tue, 10 May 2016 09:27:54 +0000 (10:27 +0100)]
xen/balloon: Fix declared-but-not-defined warning
Fix a declared-but-not-defined warning when building with
XEN_BALLOON_MEMORY_HOTPLUG=n. This fixes a regression introduced by
commit
dfd74a1edfab ("xen/balloon: Fix crash when ballooning on x86 32
bit PAE").
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Mathias Krause [Wed, 22 Jun 2016 18:29:37 +0000 (20:29 +0200)]
crypto: user - re-add size check for CRYPTO_MSG_GETALG
Commit
9aa867e46565 ("crypto: user - Add CRYPTO_MSG_DELRNG")
accidentally removed the minimum size check for CRYPTO_MSG_GETALG
netlink messages. This allows userland to send a truncated
CRYPTO_MSG_GETALG message as short as a netlink header only making
crypto_report() operate on uninitialized memory by accessing data
beyond the end of the netlink message.
Fix this be re-adding the minimum required size of CRYPTO_MSG_GETALG
messages to the crypto_msg_min[] array.
Fixes:
9aa867e46565 ("crypto: user - Add CRYPTO_MSG_DELRNG")
Cc: stable@vger.kernel.org # v4.2
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Josef Bacik [Fri, 25 Mar 2016 17:26:00 +0000 (13:26 -0400)]
Btrfs: don't do nocow check unless we have to
Before we write into prealloc/nocow space we have to make sure that there are no
references to the extents we are writing into, which means checking the extent
tree and csum tree in the case of nocow. So we don't want to do the nocow dance
unless we can't reserve data space, since it's a serious drag on performance.
With the following sequence
fallocate -l10737418240 /mnt/btrfs-test/file
cp --reflink /mnt/btrfs-test/file /mnt/btrfs-test/link
fio --name=randwrite --rw=randwrite --bs=4k --filename=/mnt/btrfs-test/file \
--end_fsync=1
we get the worst case scenario where we have to fall back on to doing the check
anyway.
Without this patch
lat (usec): min=5, max=111598, avg=27.65, stdev=124.51
write: io=10240MB, bw=126876KB/s, iops=31718, runt= 82646msec
With this patch
lat (usec): min=3, max=91210, avg=14.09, stdev=110.62
write: io=10240MB, bw=212753KB/s, iops=53188, runt= 49286msec
We get twice the throughput, half of the runtime, and half of the average
latency. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
[ PAGE_CACHE_ removal related fixups ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Chris Mason [Wed, 27 Apr 2016 13:59:38 +0000 (09:59 -0400)]
btrfs: fix deadlock in delayed_ref_async_start
"Btrfs: track transid for delayed ref flushing" was deadlocking on
btrfs_attach_transaction because its not safe to call from the async
delayed ref start code. This commit brings back btrfs_join_transaction
instead and checks for a blocked commit.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Josef Bacik [Mon, 11 Apr 2016 21:37:40 +0000 (17:37 -0400)]
Btrfs: track transid for delayed ref flushing
Using the offwakecputime bpf script I noticed most of our time was spent waiting
on the delayed ref throttling. This is what is supposed to happen, but
sometimes the transaction can commit and then we're waiting for throttling that
doesn't matter anymore. So change this stuff to be a little smarter by tracking
the transid we were in when we initiated the throttling. If the transaction we
get is different then we can just bail out. This resulted in a 50% speedup in
my fs_mark test, and reduced the amount of time spent throttling by 60 seconds
over the entire run (which is about 30 minutes). Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Naveen N. Rao [Wed, 22 Jun 2016 16:25:01 +0000 (21:55 +0530)]
powerpc/bpf/jit: Disable classic BPF JIT on ppc64le
Classic BPF JIT was never ported completely to work on little endian
powerpc. However, it can be enabled and will crash the system when used.
As such, disable use of BPF JIT on ppc64le.
Fixes:
7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Mon, 20 Jun 2016 09:23:43 +0000 (19:23 +1000)]
powerpc: Fix faults caused by radix patching of SLB miss handler
As part of the Radix MMU support we added some feature sections in the
SLB miss handler. These are intended to catch the case that we
incorrectly take an SLB miss when Radix is enabled, and instead of
crashing weirdly they bail out to a well defined exit path and trigger
an oops.
However the way they were written meant the bailout case was enabled by
default until we did CPU feature patching.
On powermacs the early debug prints in setup_system() can cause an SLB
miss, which happens before code patching, and so the SLB miss handler
would incorrectly bailout and crash during boot.
Fix it by inverting the sense of the feature section, so that the code
which is in place at boot is correct for the hash case. Once we
determine we are using Radix - which will never happen on a powermac -
only then do we patch in the bailout case which unconditionally jumps.
Fixes:
caca285e5ab4 ("powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related code")
Reported-by: Denis Kirjanov <kda@linux-powerpc.org>
Tested-by: Denis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kirill A. Shutemov [Thu, 16 Jun 2016 21:26:15 +0000 (23:26 +0200)]
UBIFS: Implement ->migratepage()
During page migrations UBIFS might get confused
and the following assert triggers:
[ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436)
[ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008
[ 213.490000] Hardware name: Allwinner sun4i/sun5i Families
[ 213.490000] [<
c0015e70>] (unwind_backtrace) from [<
c0012cdc>] (show_stack+0x10/0x14)
[ 213.490000] [<
c0012cdc>] (show_stack) from [<
c02ad834>] (dump_stack+0x8c/0xa0)
[ 213.490000] [<
c02ad834>] (dump_stack) from [<
c0236ee8>] (ubifs_set_page_dirty+0x44/0x50)
[ 213.490000] [<
c0236ee8>] (ubifs_set_page_dirty) from [<
c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8)
[ 213.490000] [<
c00fa0bc>] (try_to_unmap_one) from [<
c00fadb4>] (rmap_walk+0xb4/0x290)
[ 213.490000] [<
c00fadb4>] (rmap_walk) from [<
c00fb1bc>] (try_to_unmap+0x64/0x80)
[ 213.490000] [<
c00fb1bc>] (try_to_unmap) from [<
c010dc28>] (migrate_pages+0x328/0x7a0)
[ 213.490000] [<
c010dc28>] (migrate_pages) from [<
c00d0cb0>] (alloc_contig_range+0x168/0x2f4)
[ 213.490000] [<
c00d0cb0>] (alloc_contig_range) from [<
c010ec00>] (cma_alloc+0x170/0x2c0)
[ 213.490000] [<
c010ec00>] (cma_alloc) from [<
c001a958>] (__alloc_from_contiguous+0x38/0xd8)
[ 213.490000] [<
c001a958>] (__alloc_from_contiguous) from [<
c001ad44>] (__dma_alloc+0x23c/0x274)
[ 213.490000] [<
c001ad44>] (__dma_alloc) from [<
c001ae08>] (arm_dma_alloc+0x54/0x5c)
[ 213.490000] [<
c001ae08>] (arm_dma_alloc) from [<
c035cecc>] (drm_gem_cma_create+0xb8/0xf0)
[ 213.490000] [<
c035cecc>] (drm_gem_cma_create) from [<
c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8)
[ 213.490000] [<
c035cf20>] (drm_gem_cma_create_with_handle) from [<
c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48)
[ 213.490000] [<
c035d088>] (drm_gem_cma_dumb_create) from [<
c0341ed8>] (drm_ioctl+0x12c/0x444)
[ 213.490000] [<
c0341ed8>] (drm_ioctl) from [<
c0121adc>] (do_vfs_ioctl+0x3f4/0x614)
[ 213.490000] [<
c0121adc>] (do_vfs_ioctl) from [<
c0121d30>] (SyS_ioctl+0x34/0x5c)
[ 213.490000] [<
c0121d30>] (SyS_ioctl) from [<
c000f2c0>] (ret_fast_syscall+0x0/0x34)
UBIFS is using PagePrivate() which can have different meanings across
filesystems. Therefore the generic page migration code cannot handle this
case correctly.
We have to implement our own migration function which basically does a
plain copy but also duplicates the page private flag.
UBIFS is not a block device filesystem and cannot use buffer_migrate_page().
Cc: stable@vger.kernel.org
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[rw: Massaged changelog, build fixes, etc...]
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Christoph Hellwig <hch@lst.de>
Richard Weinberger [Thu, 16 Jun 2016 21:26:14 +0000 (23:26 +0200)]
mm: Export migrate_page_move_mapping and migrate_page_copy
Export these symbols such that UBIFS can implement
->migratepage.
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Christoph Hellwig <hch@lst.de>
Richard Weinberger [Mon, 20 Jun 2016 22:31:50 +0000 (00:31 +0200)]
ubi: Make recover_peb power cut aware
recover_peb() was never power cut aware,
if a power cut happened right after writing the VID header
upon next attach UBI would blindly use the new partial written
PEB and all data from the old PEB is lost.
In order to make recover_peb() power cut aware, write the new
VID with a proper crc and copy_flag set such that the UBI attach
process will detect whether the new PEB is completely written
or not.
We cannot directly use ubi_eba_atomic_leb_change() since we'd
have to unlock the LEB which is facing a write error.
Cc: stable@vger.kernel.org
Reported-by: Jörg Pfähler <pfaehler@isse.de>
Reviewed-by: Jörg Pfähler <pfaehler@isse.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Linus Walleij [Thu, 16 Jun 2016 09:55:55 +0000 (11:55 +0200)]
gpio: make library immune to error pointers
Most functions that take a GPIO descriptor in need to check the
descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC()
macro except for the gpiod_to_irq() function which needs special
handling.
Cc: stable@vger.kernel.org
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 15 Jun 2016 20:57:38 +0000 (22:57 +0200)]
gpio: make sure gpiod_to_irq() returns negative on NULL desc
commit
54d77198fdfbc4f0fe11b4252c1d9c97d51a3264
("gpio: bail out silently on NULL descriptors")
doesn't work for gpiod_to_irq(): drivers assume that NULL
descriptors will give negative IRQ numbers in return.
It has been pointed out that returning 0 is NO_IRQ and that
drivers should be amended to treat this as an error, but that
is for the longer term: now let us repair the semantics.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Axel Lin [Mon, 13 Jun 2016 05:48:53 +0000 (13:48 +0800)]
gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
Fixes:
9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Torvalds [Wed, 22 Jun 2016 21:11:24 +0000 (14:11 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace
Pull userns fix from Eric Biederman:
"This contains just a single small patch that fixes a tiny hole in the
logic of allowing unprivileged mounting of proc and sysfs.
In practice I don't think anyone is affected because having MNT_RDONLY
clear in mnt->mnt_flags but MS_RDONLY set in sb->s_flags is very weird
for a filesystem, and weirder for proc and sysfs. However if it
happens let's handle it correctly and then no one has to to worry
about this crazy case"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
mnt: Account for MS_RDONLY in fs_fully_visible
Linus Torvalds [Wed, 22 Jun 2016 17:13:25 +0000 (10:13 -0700)]
Merge tag 'gpio-v4.7-4' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"More GPIO fixes. Most prominent the gpiod_to_irq() fix brought to my
attention by Hans de Goede. The hardening patch is a consequence of
the reasoning around that bug.
- It was discovered that too many parts of the kernel does not
respect gpiod_to_irq() returning zero for an invalid IRQ. While
this gets fixed, we need to make it return negative errorcodes
again.
- Harden the library a bit when passed error pointers. It is a bug
to use these, but let's be helpful and warn the users.
- Fix an uninitialized spinlock in the 104-idi-48 driver"
* tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: make library immune to error pointers
gpio: make sure gpiod_to_irq() returns negative on NULL desc
gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
James Morse [Wed, 22 Jun 2016 09:06:13 +0000 (10:06 +0100)]
arm64: hibernate: Don't hibernate on systems with stuck CPUs
Hibernate relies on cpu hotplug to prevent secondary cores executing
the kernel text while it is being restored.
Add a call to cpus_are_stuck_in_kernel() to determine if there are
CPUs not counted by 'num_online_cpus()', and prevent hibernate in this
case.
Fixes:
82869ac57b5 ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
James Morse [Wed, 22 Jun 2016 09:06:12 +0000 (10:06 +0100)]
arm64: smp: Add function to determine if cpus are stuck in the kernel
kernel/smp.c has a fancy counter that keeps track of the number of CPUs
it marked as not-present and left in cpu_park_loop(). If there are any
CPUs spinning in here, features like kexec or hibernate may release them
by overwriting this memory.
This problem also occurs on machines using spin-tables to release
secondary cores.
After commit
44dbcc93ab67 ("arm64: Fix behavior of maxcpus=N")
we bring all known cpus into the secondary holding pen, meaning this
memory can't be re-used by kexec or hibernate.
Add a function cpus_are_stuck_in_kernel() to determine if either of these
cases have occurred.
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Ben Dooks [Tue, 21 Jun 2016 18:18:32 +0000 (19:18 +0100)]
ALSA: hda/tegra: iomem fixups for sparse warnings
The readl/writel are not being passed __iomem annotated
variables, so fix the following sparse warnings by adding
__iomem in:
sound/pci/hda/hda_tegra.c:120:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:120:9: expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:120:9: got unsigned int [usertype] *addr
sound/pci/hda/hda_tegra.c:125:16: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:125:16: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:125:16: got unsigned int [usertype] *addr
sound/pci/hda/hda_tegra.c:134:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:134:13: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:134:13: got void *dword_addr
sound/pci/hda/hda_tegra.c:137:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:137:9: expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:137:9: got void *dword_addr
sound/pci/hda/hda_tegra.c:146:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:146:13: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:146:13: got void *dword_addr
sound/pci/hda/hda_tegra.c:156:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:156:13: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:156:13: got void *dword_addr
sound/pci/hda/hda_tegra.c:159:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:159:9: expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:159:9: got void *dword_addr
sound/pci/hda/hda_tegra.c:168:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:168:13: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:168:13: got void *dword_addr
sound/pci/hda/hda_tegra.c:173:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:173:23: expected void ( *reg_writel )( ... )
sound/pci/hda/hda_tegra.c:173:23: got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:174:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:174:22: expected unsigned int ( *reg_readl )( ... )
sound/pci/hda/hda_tegra.c:174:22: got unsigned int ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:175:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:175:23: expected void ( *reg_writew )( ... )
sound/pci/hda/hda_tegra.c:175:23: got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:176:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:176:22: expected unsigned short ( *reg_readw )( ... )
sound/pci/hda/hda_tegra.c:176:22: got unsigned short ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:177:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:177:23: expected void ( *reg_writeb )( ... )
sound/pci/hda/hda_tegra.c:177:23: got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:178:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:178:22: expected unsigned char ( *reg_readb )( ... )
sound/pci/hda/hda_tegra.c:178:22: got unsigned char ( static [toplevel] *<noident> )( ... )
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lukasz Luba [Tue, 31 May 2016 10:25:09 +0000 (11:25 +0100)]
PM / devfreq: fix initialization of current frequency in last status
Some systems need current frequency from last_status for calculation
but it is zeroed during initialization. When the device starts there is
no history, but we can assume that the last frequency was the
same as the initial frequency (which is also used in 'previous_freq').
The log shows the result of this misinterpreted value.
[ 2.042847] ... Failed to get voltage for frequency 0: -34
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Dan Carpenter [Thu, 26 May 2016 06:45:42 +0000 (09:45 +0300)]
PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
Smatch complains because platform_get_resource() returns NULL on error
and not an error pointer so the check is wrong. Julia Lawall pointed
out that normally we don't check these, because devm_ioremap_resource()
has a check for NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
MyungJoo Ham [Mon, 16 May 2016 02:41:57 +0000 (11:41 +0900)]
PM / devfreq: remove double put_device
When device_register() returns with error, it has already
done put_device() on the input device pointer.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Cai Zhiyong [Sat, 14 May 2016 06:13:30 +0000 (14:13 +0800)]
PM / devfreq: fix double call put_device
1295 */
1296 void device_unregister(struct device *dev)
1297 {
1298 pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
1299 device_del(dev);
1300 put_device(dev);
1301 }
1302 EXPORT_SYMBOL_GPL(device_unregister);
1303
device_unregister is called put_device, there is no need to call
put_device(&devfreq->dev) again.
Signed-off-by: Cai Zhiyong <caizhiyong@huawei.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
MyungJoo Ham [Fri, 2 Oct 2015 03:48:54 +0000 (12:48 +0900)]
PM / devfreq: fix duplicated kfree on devfreq pointer
device_unregister() calls kfree already.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
MyungJoo Ham [Fri, 2 Oct 2015 03:39:23 +0000 (12:39 +0900)]
PM / devfreq: devm_kzalloc to have dev pointer more precisely
devm_kzalloc of devfreq's statistics data structure has been
using its parent device as the dev allocated for.
If a device's devfreq is disabled in run-time,
such allocated memory won't be freed.
Desginating more precisely with the devfreq device
pointer fixes the issue.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Lv Zheng [Tue, 21 Jun 2016 04:34:15 +0000 (12:34 +0800)]
ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading
The new module-level code (MLC) approach invokes MLC on the per-table
basis, but the dynamic loading support of this is incorrect because
of the lock order:
acpi_ns_evaluate
acpi_ex_enter_intperter
acpi_ns_load_table (triggered by Load opcode)
acpi_ns_exec_module_code_list
acpi_ex_enter_intperter
The regression is introduced by the following commit:
Commit:
2785ce8d0da1cac9d8f78615e116cf929e9a9123
ACPICA Commit:
071eff738c59eda1792ac24b3b688b61691d7e7c
Subject: ACPICA: Add per-table execution of module-level code
This patch fixes this regression by unlocking the interpreter lock
before invoking MLC. However, the unlocking is done to the
acpi_ns_load_table(), in which the interpreter lock should be locked
by acpi_ns_parse_table() but it wasn't.
Fixes:
2785ce8d0da1 (ACPICA: Add per-table execution of module-level code)
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
[ rjw : Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Shaokun Zhang [Tue, 21 Jun 2016 07:32:57 +0000 (15:32 +0800)]
arm64: mm: remove page_mapping check in __sync_icache_dcache
__sync_icache_dcache unconditionally skips the cache maintenance for
anonymous pages, under the assumption that flushing is only required in
the presence of D-side aliases [see
7249b79f6b4cc ("arm64: Do not flush
the D-cache for anonymous pages")].
Unfortunately, this breaks migration of anonymous pages holding
self-modifying code, where userspace cannot be reasonably expected to
reissue maintenance instructions in response to a migration.
This patch fixes the problem by removing the broken page_mapping(page)
check from the cache syncing code, otherwise we may end up fetching and
executing stale instructions from the PoU.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Masahiro Yamada [Tue, 21 Jun 2016 01:44:00 +0000 (10:44 +0900)]
arm64: fix boot image dependencies to not generate invalid images
I fixed boot image dependencies for arch/arm in commit
3939f3345050
("ARM: 8418/1: add boot image dependencies to not generate invalid
images").
I see a similar problem for arch/arm64; "make -jN Image Image.gz"
would sometimes end up generating bad images where N > 1.
Fix the dependency in arch/arm64/Makefile to avoid the race
between "make Image" and "make Image.*".
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Jean-Philippe Brucker [Fri, 17 Jun 2016 17:33:00 +0000 (18:33 +0100)]
arm64: update ASID limit
During a rollover, we mark the active ASID on each CPU as reserved, before
allocating a new ID for the task that caused the rollover. This means that
with N CPUs, we can only guarantee the new task to obtain a valid ASID if
we have at least N+1 ASIDs. Update this limit in the initcall check.
Note that this restriction was introduced by commit
8e648066 on the
arch/arm side, which disallow re-using the previously active ASID on the
local CPU, as it would introduce a TLB race.
In addition, we only dispose of NUM_USER_ASIDS-1, since ASID 0 is
reserved. Add this restriction as well.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Lyude [Thu, 9 Jun 2016 15:58:15 +0000 (11:58 -0400)]
drm/i915/fbc: Disable on HSW by default for now
>From https://bugs.freedesktop.org/show_bug.cgi?id=96461 :
This was kind of a difficult bug to track down. If you're using a
Haswell system running GNOME and you have fbc completely enabled and
working, playing videos can result in video artifacts. Steps to
reproduce:
- Run GNOME
- Ensure FBC is enabled and active
- Download a movie, I used the ogg version of Big Buck Bunny for this
- Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin !
glimagesink` in a terminal
- Watch for about over a minute, you'll see small horizontal lines go
down the screen.
For the time being, disable FBC for Haswell by default.
Stefan Richter reported kernel freezes (no video artifacts) when fbc
is on. (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE
applications, thread begins at https://lkml.org/lkml/2016/4/26/813).
We also got reports from Steven Honeyman on openbox+roxterm.
v2 (From Paulo):
- Add extra information to the commit message
- Add Fixes tag
- Rebase
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96461
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96464
Fixes:
a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465487895-7401-1-git-send-email-cpaul@redhat.com
(cherry picked from commit
c7f7e2feffb0294302041507dfd5fc15f01afccc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Mika Kahola [Mon, 20 Jun 2016 08:10:26 +0000 (11:10 +0300)]
drm/i915: Revert DisplayPort fast link training feature
It has been found out that in some HW combination the DisplayPort
fast link training feature caused screen flickering. Let's revert
this feature for now until we can ensure that the feature works for
all platforms.
This is a manual revert of commits
5fa836a9d859 ("drm/i915: DP link
training optimization") and
4e96c97742f4 ("drm/i915: eDP link training
optimization").
Fixes:
5fa836a9d859 ("drm/i915: DP link training optimization")
Fixes:
4e96c97742f4 ("drm/i915: eDP link training optimization")
Cc: <stable@vger.kernel.org> # v4.2+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit
91df09d92ad82c8778ca218097bf827f154292ca)
Rex Zhu [Tue, 7 Jun 2016 10:39:06 +0000 (18:39 +0800)]
drm/amd/powerplay: enable clock stretch feature for polaris
Power saving feature which reduces the amount of
voltage needed for specific engine clocks.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 7 Jun 2016 06:09:56 +0000 (14:09 +0800)]
drm/amdgpu/gfx8: update golden setting for polaris10
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 8 Jun 2016 11:39:42 +0000 (19:39 +0800)]
drm/amd/powerplay: enable avfs feature for polaris
avfs feature is for voltage control based on
gpu system clock on polaris10
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 8 Jun 2016 11:17:31 +0000 (19:17 +0800)]
drm/amdgpu/atombios: add avfs struct for Polaris10/11
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 7 Jun 2016 10:38:39 +0000 (18:38 +0800)]
drm/amd/powerplay: add avfs related define for polaris
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 8 Jun 2016 11:42:48 +0000 (19:42 +0800)]
drm/amd/powrplay: enable stutter_mode for polaris.
To minimize the dram power expenditure during static -screen
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 8 Jun 2016 11:41:00 +0000 (19:41 +0800)]
drm/amd/powerplay: disable UVD SMU handshake for MCLK.
sync up with internal programming recommendations.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>