drm/omap: dsi: rename dsi_display_* functions

The function names have evolved to be very confusing, and bunch of them
have "display" in them even if the function doesn't deal with display as
such (e.g. dsi_display_enable which just enables the DSI interface).
Rename them by dropping the "display".

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-79-tomi.valkeinen@ti.com

drm/omap: dsi: display_disable cleanup

We can drop dsi_display_disable() which just calls
_dsi_display_disable(), and rename _dsi_display_disable() to
dsi_display_disable().

The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_disable is extra and
can be dropped, as _dsi_display_disable() has the same WARN_ON().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-78-tomi.valkeinen@ti.com

drm/omap: dsi: display_enable cleanup

We can drop dsi_display_enable(), which just calls
_dsi_display_enable(), and rename _dsi_display_enable() to
dsi_display_enable().

The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_enable is extra and
can be dropped, as _dsi_display_enable() has the same WARN_ON().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-77-tomi.valkeinen@ti.com

drm/omap: dsi: move enable/disable to bridge enable/disable

Clean up the code by inlining dsi_enable_video_outputs and
dsi_disable_video_outputs functions.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-76-tomi.valkeinen@ti.com

drm/omap: dsi: move structs & defines to dsi.h

Move structs and defines to a private dsi.h header file to make dsi.c a
bit easier to navigate. Also move the (now) private structs and defines
from omapdss.h to dsi.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-75-tomi.valkeinen@ti.com

drm/panel: panel-dsi-cm: drop unneeded includes

Drop unneeded includes.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-74-tomi.valkeinen@ti.com

drm/panel: panel-dsi-cm: add panel database to driver

Add a panel database to the driver instead of reading propertes from DT
data. This is similar to panel-simple, and I believe it's more future
safe way to handle the panels.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-73-tomi.valkeinen@ti.com

drm/panel: panel-dsi-cm: remove extra 'if'

We have a useless 'if' in the dsicm_bl_update_status(), a left over from
the conversion to DRM model. Drop the if.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-72-tomi.valkeinen@ti.com

drm/omap: dsi: use separate VCs for cmd and video

For command mode panels we can use a single VC for sending command and
video data, even if we have to change the data source for that VC when
going from command to video or vice versa.

However, with video mode panels we want to keep the pixel data VC
enabled, and use another VC for command data, and the commands will get
interleaved into the pixel data.

This patch makes the driver use VC0 for commands and VC1 for video.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-71-tomi.valkeinen@ti.com

drm/omap: dsi: enable HS before sending the frame

We currently use a single VC for sending commands and pixel data. The
LP/HS mode for pixel data is correctly set to HS by accident, as we have
set the VC to HS already earlier.

However, if we use a different VC for video data, the VC is in LP mode.
Fix this by always enabling HS mode before starting a frame update.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-70-tomi.valkeinen@ti.com

drm/omap: dsi: skip dsi_vc_enable_hs when already in correct mode

Simplify and optimize dsi_vc_enable_hs() so that it can be called
without checking the current HS/LP mode. Make dsi_vc_enable_hs() return
if the VC is already in the correct mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-69-tomi.valkeinen@ti.com

drm/omap: dsi: untangle vc & channel

DSI virtual channel and hardware VC blocks have gotten tangled as
described in the previous commits. This has not caused any issues, as
the value for both is 0, so it happens to work.

To fix the issue, change the code to use the correct one of the two.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-68-tomi.valkeinen@ti.com

drm/omap: dsi: pass vc and channel to various functions

To start fixing the issues related to channels and vcs described in the
previous commit, pass vc and/or channel to various functions which will
need it do properly handle different DSI channels and VCs.

No functional changes.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-67-tomi.valkeinen@ti.com

drm/omap: dsi: rename 'channel' to 'vc'

The "channel" usage in omap dsi driver is confusing. We have three
different "channels":

1) DSI virtual channel ID. This is a number from 0 to 3, included in the
packet payload.

2) VC. This is a register block in the DSI IP. There are four of those
blocks. A VC is a DSI "pipeline", with defined fifo settings, data
source (cpu or dispc), and some other settings. It has no relation to
the 1).

3) dispc channel. It's the "pipeline" number dispc uses to send pixel
data.

The previous patch handled the third case.

 To start fixing 1) and 2), we first rename all uses of 'channel' to
'vc', as in most of the cases that is the correct thing to use.

However, in some places 1) and 2) have gotten mixed up (i.e. the code
uses msg->channel when it should use vc), which will be fixed in the
following patch.

Note that mixing 1) and 2) currently is "fine", as at the moment we only
support DSI peripherals with DSI virtual channel 0, and we always use
VC0 to send data. So both 1) and 2) are always 0.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-66-tomi.valkeinen@ti.com

drm/omap: dsi: cleanup dispc channel usage

The "channel" usage in omap dsi driver is confusing. As the first step,
change "channel" to "dispc_channel" when dealing with the dispc channel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-65-tomi.valkeinen@ti.com

drm/omap: dsi: drop useless channel checks

A DSI peripheral can have virtual channel ID of 0-3. This should be
always the case, and there's no need in the driver to validate the
channel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-64-tomi.valkeinen@ti.com

drm/omap: dsi: simplify VC handling

The VC handling has gotten quite tangled up. As the first step to clean
it up, lets define that we only support a single DSI peripheral (which
was really already the case), and we always use VC0 (define VC_DEFAULT
0) register block to send data to the peripheral.

We can thus have a single mipi_dsi_device pointer and remove the
for-loops which made passes over all the four VCs (just the first one
was ever used).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-63-tomi.valkeinen@ti.com

drm/omap: dsi: send nop instead of page & column

The OMAP DSI command mode panel driver used to send page & column
address before each frame update, and this code was moved into the DSI
host driver when converting it to the DRM bridge model.

However, it's not really required to send the page & column address
before each frame. It's also something that doesn't really belong to the
DSI host driver, so we should drop the code.

That said, frame updates break if we don't send _something_ between the
frames. A NOP command does the trick.

It is not clear if this behavior is as expected from a DSI command mode
frame transfer, or is it a feature/issue with OMAP DSI driver, or a
feature/issue in the command mode panel used.

Most likely this is related to the following from the DSI spec:

"To enable PHY synchronization the host processor should periodically
end HS transmission and drive the Data Lanes to the LP state. This
transition should take place at least once per frame."

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-62-tomi.valkeinen@ti.com

drm/panel: panel-dsi-cm: set column & page at setup

Set the column & page address once during setup, instead of relying the
DSI host driver to set those.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-61-tomi.valkeinen@ti.com

drm/omap: dsi: set trans_mode according to client mode_flags

The DSI host driver currently ignores the video mode flags in
client->mode_flags. Add the code to take the transfer mode from client's
mode_flags.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-60-tomi.valkeinen@ti.com

drm/omap: pll: fix iteration loop check

If the PLL calc function is given bad parameters, n_start/m_start may be
higher than n_stop/m_stop, which leads to the loops iterating through
the whole u32 number space.

Fix this by failing early on such cases.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-59-tomi.valkeinen@ti.com

ARM: dts: omap5: add address-cells & size-cells to dsi

Add address-cells & size-cells to DSI nodes so that board files do not
need to define them.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-58-tomi.valkeinen@ti.com

drm/panel: panel-dsi-cm: cleanup tear enable

Simplify the code by moving code from _dsicm_enable_te() into
dsicm_power_on().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-57-tomi.valkeinen@ti.com

drm/panel: panel-dsi-cm: use MIPI_DCS_GET_ERROR_COUNT_ON_DSI

Use the common MIPI_DCS_GET_ERROR_COUNT_ON_DSI define instead of
driver's own.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-56-tomi.valkeinen@ti.com

drm/omap: remove dss_mgr_ops

dss_mgr_ops was needed with the multi-module architecture, but is no
longer needed. We can thus remove it and use direct calls.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-55-tomi.valkeinen@ti.com

drm/omap: remove dispc_ops

dispc_ops was created to help with the multi-module architecture and
giving us the possibility of multiple dispc implementations. Neither of
these is valid anymore, and we can remove dispc_ops and use direct
calls to dispc.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-54-tomi.valkeinen@ti.com

drm/omap: drop unused owner field

dssdev->owner is set, but never used. We can drop the field.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-53-tomi.valkeinen@ti.com

drm/omap: remove unused display.c

The functions in display.c are not used, so drop the file.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-52-tomi.valkeinen@ti.com

drm/omap: squash omapdrm sub-modules into one

At the moment we have three different modules: omapdss-base, omapdss,
omapdrm. This setup is finally obsolete, as the last omapdrm specific
panel has been converted to DRM panel.

We can thus remove omapdss-base and omapdss, and just compile everything
into omapdrm.ko.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-51-tomi.valkeinen@ti.com

ARM: omap2plus_defconfig: Update for moved DSI command mode panel

The DSI command mode panel is no longer specific
to OMAP and thus the config option has been renamed
slightly.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-50-tomi.valkeinen@ti.com

drm/omap: dsi: simplify pin config

Simplify DSI pin config, which always originates from DT
nowadays. With the code being fully contained in the DSI
encoder, we can drop the public structure.

Since the function is no longer exposed, it now directly
takes the private DSI data pointer. This drops a pointless
conversion and means the pins can be configured earlier.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-49-tomi.valkeinen@ti.com

drm/omap: simplify DSI manual update code

Move dsi_ops into the main structure, since all other ops
are gone. Instead of checking the device type we can simply
check if dsi_ops are set.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-48-tomi.valkeinen@ti.com

drm/omap: drop dssdev display field

All displays are now using a drm_panel or a drm_bridge that models the
connector instead of dssdev, so this field is always 0 and can be
dropped.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-47-tomi.valkeinen@ti.com

drm/omap: drop DSS ops_flags

The omapdss device's ops_flags field is no longer
used and can be dropped.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-46-tomi.valkeinen@ti.com

drm/omap: drop unused DSS next pointer

Since all encoders and panels are using the bridge API now,
we next pointer is no longer useful and can be dropped.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-45-tomi.valkeinen@ti.com

drm/omap: simplify omap_display_id

We no longer need to check for the DSS API, since all encoders,
panels and connectors have been converted to the bridge API.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-44-tomi.valkeinen@ti.com

drm/omap: remove unused omap_connector

Remove unused code. Connectors are now created via drm_bridge_connector_init()
and no longer OMAP specific.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-43-tomi.valkeinen@ti.com

drm/omap: remove legacy DSS device operations

All DSS devices have been converted to bridge API, so
the device operations are always NULL. This removes
the device ops function pointers and all code using it.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-42-tomi.valkeinen@ti.com

drm/omap: dsi: Register a drm_bridge

In order to integrate with a chain of drm_bridge, the internal DSI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-41-tomi.valkeinen@ti.com

drm/panel: Move OMAP's DSI command mode panel driver

The panel driver is no longer using any OMAP specific APIs, so
let's move it into the generic panel directory.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-40-tomi.valkeinen@ti.com

drm/omap: remove global dss_device variable

We can simply provide the device to the omapdrm driver
via pdata. omapdss_is_initialized() is no longer required
(even before this patch), since omapdrm device is only
registered after the pointer is initialized.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-39-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: fix remove()

Do not try to reset the panel after DSI has been
detached, since the DSI clocks may have been disabled
at this point. The panel will be disabled and unprepared
before being removed and a reset will be done when being
probed again.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-38-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: support unbinding

Now, that the driver implements the common DRM panel API
the unbind no longer needs to be suppressed.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-37-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO

Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-36-tomi.valkeinen@ti.com

drm/omap: dsi: implement check timings

Implement check timings, which will check if it's possible to
configure the clocks for the provided mode using the same code
as the set_config() hook.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-35-tomi.valkeinen@ti.com

drm/omap: drop omapdss-boot-init

The table of compatible values needed to be prefixed with "omapdss,"
is empty, so all of this code is doing nothing now. Let's drop it.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-34-tomi.valkeinen@ti.com

drm/omap: dsi: convert to drm_panel

This converts the DSI module to expect common drm_panel display
drivers instead of dssdev based ones.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-33-tomi.valkeinen@ti.com

drm/omap: dsi: drop custom panel capability support

Due to previous changes the DSI encoder gets the capabilities
via DSI client's mode_flags and no longer needs the omapdss
specific caps. The core code now checks if the DSI encoder
is actually configured into command mode instead of just checking
the panel capabilities.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-32-tomi.valkeinen@ti.com

drm/omap: dsi: Reverse direction of the DSS device enable/disable operations

Complete the direction reversal of the DSS device enable/disable
operations started by commit 19b4200d8f4b ("drm/omap: Reverse direction
of the DSS device enable/disable operations").

This effectively drops the requirement of calling DSS specific
code from the DSI panel driver moving it a bit further to a
standard drm_panel driver.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-31-tomi.valkeinen@ti.com

drm/omap: dsi: move panel refresh function to host

This moves the panel refresh/update function from the panel
driver into the DSI host driver to prepare for common drm_panel
support.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-30-tomi.valkeinen@ti.com

drm/omap: dsi: do ULPS in host driver

Move ULPS handling into the DSI host controller, so that we
no longer need a custom API for the DSI client.

Note that for now ULPS is always disabled.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-29-tomi.valkeinen@ti.com

drm/omap: dsi: untangle ulps ops from enable/disable

Create a custom function pointer for ULPS and use it instead of
reusing disable/enable functions for ULPS mode switch. This allows
us to use the common disable/enable functions pointers for DSI.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-28-tomi.valkeinen@ti.com

drm/omap: dsi: do bus locking in host driver

This moves the bus locking into the host driver and unexports
the custom API in preparation for drm_panel support.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-27-tomi.valkeinen@ti.com

drm/omap: dsi: drop custom enable_te() API

Instead of using the custom enable_te() API, this automatically
enables/disables TE core support when a matching packet is sent
to the panel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-26-tomi.valkeinen@ti.com

drm/omap: dsi: move TE GPIO handling into core

In preparation for removing custom DSS calls from the DSI
panel driver, this moves support for external tearing event
GPIOs into the DSI host driver. This way tearing events are
always handled in the core resulting in simplification of
the panel drivers.

The TE GPIO acquisition follows works in the same way as the
exynos DSI implementation.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-25-tomi.valkeinen@ti.com

drm/omap: dsi: lp/hs switching support for transfer()

Integrate low-power / high-speed bus switching into transfer
function and drop the omapdrm specific enable_hs() callback.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-24-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: use bulk regulator API

Use bulk regulator API to simplify the code. This also switches
from _optional variant to normal variant, which will provide a
dummy regulator (i.e. if some always-enabled regulator is not
described in DT).

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-23-tomi.valkeinen@ti.com

drm/omap: dsi: use pixel-format and mode from attach

In order to reduce the amount of custom functionality, this moves
handling of pixel format and DSI mode from set_config() to dsi
attach.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-22-tomi.valkeinen@ti.com

drm/omap: dsi: drop useless sync()

The DSI sync() function only locks the bus and then releases
it again. Currently the only invocation is directly before
update(), which locks the bus anyways.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-21-tomi.valkeinen@ti.com

drm/omap: dsi: drop unused enable_te()

enable_te() is not used, so the custom API can be dropped.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-20-tomi.valkeinen@ti.com

drm/omap: dsi: drop unused get_te()

The get_te() callback is not used, so we can drop the
custom API.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-19-tomi.valkeinen@ti.com

drm/omap: dsi: drop unused memory_read()

memory_read is not used, so we can drop the code.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-18-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines

Drop local definition of common MIPI DCS 1.3 defines.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-17-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: drop hardcoded VC

Use dsi->channel everywhere, which originates from DT.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-16-tomi.valkeinen@ti.com

drm/omap: dsi: request VC via mipi_dsi_attach

Drop custom request_vc/release_vc callbacks by using the
generic mipi_dsi_attach/mipi_dsi_detach functions.

To use mipi_dsi_attach() we need to fill in the mipi_dsi_device fields,
and some of these fields overlap with the fields in omap_dss_dsi_config.
In later patches the latter will get dropped.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-15-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: use DSI helpers

After converting the driver to mipi_dsi_device we can use the generic
message helpers to simplify the driver a lot.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-14-tomi.valkeinen@ti.com

drm/omap: dsi: introduce mipi_dsi_host

This moves from custom platform driver infrastructure to mipi_dsi_host
and mipi_dsi_device. Note, that this is a graduate step and the driver
only uses the devices types and transfer function, but not yet the new
device binding style or drm_panel.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-13-tomi.valkeinen@ti.com

drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg

Simplify the DSI encoder by using mipi_dsi_msg for
dsi_vc_send_long and dsi_vc_send_short. Further improvements
require cleaning up the channel allocation code first.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-12-tomi.valkeinen@ti.com

drm/omap: dsi: simplify read functions

Simplify the read related message handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-11-tomi.valkeinen@ti.com

drm/omap: dsi: simplify write function

Simplify the write related messages handling by using the functionality
provided by CONFIG_DRM_MIPI_DSI.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-10-tomi.valkeinen@ti.com

drm/omap: dsi: drop virtual channel logic

This drops the virtual channel logic. Afterwards DSI clients
request their channel number and get the virtual channel with
the same number or -EBUSY if already in use.

The change here is not strictly speaking correct, as it combines the VC
(DSI's "configuration block") and virtual channel ID (the ID sent in the
DSI packets). But as we currently only support a single DSI command mode
panel, this works fine: we always use VC0, and VC ID 0.

This needs more work to support video mode panels, but that can be done
after moving to DRM bridge and panel model, after which we can do that
work with the proper APIs.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-9-tomi.valkeinen@ti.com

drm/omap: dsi: unexport specific data transfer functions

After converting all DSI drivers, unexport the specific transfer
functions.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-8-tomi.valkeinen@ti.com

drm/omap: panel-dsi-cm: convert to transfer API

This converts the panel-dsi-cm driver to use the transfer
API instead of specific functions, so that the specific
functions can be unexported and squashed into the generic
transfer function.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-7-tomi.valkeinen@ti.com

drm/omap: dsi: add generic transfer function

This prepares the driver for becoming a mipi_dsi_host implementation,
which provides a generic transfer function instead of all kind of
different read/write functions. The implementation will become more
elegant after unexporting the specific functions in the following
patches.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-6-tomi.valkeinen@ti.com

drm/omap: constify write buffers

The write buffers are not modified, so they can be constant.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-5-tomi.valkeinen@ti.com

drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_*

This replaces OMAP specific enum for pixel format with
common implementation.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-4-tomi.valkeinen@ti.com

drm/omap: drop unused dsi.configure_pins

The panel-dsi-cm's ddata->pin_config is always NULL, so this
callback is never called. Instead the DSI encoder gets the pin
configuration directly from DT.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-3-tomi.valkeinen@ti.com

Revert "drm/omap: dss: Remove unused omap_dss_device operations"

This reverts commit e086558ae923 ("drm/omap: dss: Remove unused
omap_dss_device operations")

This is still needed by DSI. E.g. unloading modules without this will
cause a crash.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-2-tomi.valkeinen@ti.com

drm/omap: Enable COLOR_ENCODING and COLOR_RANGE properties for planes

Adds support for COLOR_ENCODING and COLOR_RANGE properties to
omap_plane.c and dispc.c. The supported encodings and ranges are
presets are:

For COLOR_ENCODING:
- YCbCr BT.601 (default)
- YCbCr BT.709

For COLOR_RANGE:
- YCbCr limited range
- YCbCr full range (default)

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-6-tomi.valkeinen@ti.com

drm/omap: rearrange includes in omapdss.h

Drop "uapi/" and rearrange alphabetically.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-5-tomi.valkeinen@ti.com

drm/omap: Implement CTM property for CRTC using OVL managers CPR matrix

Implement CTM color management property for OMAP CRTC using DSS
overlay manager's Color Phase Rotation matrix. The CPR matrix does not
exactly match the CTM property documentation. On DSS the CPR matrix is
applied after gamma table look up. However, it seems stupid to add a
custom property just for that.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-4-tomi.valkeinen@ti.com

drm/omap: use degamma property for gamma table

omapdrm supports gamma via GAMMA_LUT property. However, the HW we have
is:

gamma -> ctm -> out

instead of what the model DRM framework uses:

ctm -> gamma -> out

As the following patches add CTM support for omapdrm, lets first fix the
gamma.

This patch changes the property from GAMMA_LUT to DEGAMMA_LUT, and thus
we will have:

degamma -> ctm -> out

and the legacy ioctl will continue working as before.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103080310.164453-3-tomi.valkeinen@ti.com

drm: add legacy support for using degamma for gamma

The DRM core handles legacy gamma-set ioctl by setting GAMMA_LUT and
clearing CTM and DEGAMMA_LUT.

This works fine on HW where we have either:

degamma -> ctm -> gamma -> out

or

ctm -> gamma -> out

However, if the HW has gamma table before ctm, the atomic property
should be DEGAMMA_LUT, and thus we have:

degamma -> ctm -> out

This is fine for userspace which sets gamma table using the properties,
as the userspace can check for the existence of gamma & degamma, but the
legacy gamma-set ioctl does not work.

Change the DRM core to use DEGAMMA_LUT instead of GAMMA_LUT when the
latter is unavailable.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-3-tomi.valkeinen@ti.com

drm: automatic legacy gamma support

To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.

We can simplify this by making the core handle it automatically.

Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com

udlfb: Fix memory leak in dlfb_usb_probe

The dlfb_alloc_urb_list function is called in dlfb_usb_probe function,
after that if an error occurs, the dlfb_free_urb_list function need to
be called.

BUG: memory leak
unreferenced object 0xffff88810adde100 (size 32):
  comm "kworker/1:0", pid 17, jiffies 4294947788 (age 19.520s)
  hex dump (first 32 bytes):
    10 30 c3 0d 81 88 ff ff c0 fa 63 12 81 88 ff ff  .0........c.....
    00 30 c3 0d 81 88 ff ff 80 d1 3a 08 81 88 ff ff  .0........:.....
  backtrace:
    [<0000000019512953>] kmalloc include/linux/slab.h:552 [inline]
    [<0000000019512953>] kzalloc include/linux/slab.h:664 [inline]
    [<0000000019512953>] dlfb_alloc_urb_list drivers/video/fbdev/udlfb.c:1892 [inline]
    [<0000000019512953>] dlfb_usb_probe.cold+0x289/0x988 drivers/video/fbdev/udlfb.c:1704
    [<0000000072160152>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431
    [<00000000463fbcb4>] __device_attach+0x122/0x250 drivers/base/dd.c:912
    [<00000000b881a711>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:491
    [<00000000364bbda5>] device_add+0x5ac/0xc30 drivers/base/core.c:2936
    [<00000000eecca418>] usb_set_configuration+0x9de/0xb90 drivers/usb/core/message.c:2159
    [<00000000edfeca2d>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
    [<000000001830872b>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
    [<00000000a8d6726f>] really_probe+0x159/0x480 drivers/base/dd.c:554
    [<00000000c3ce4b0e>] driver_probe_device+0x84/0x100 drivers/base/dd.c:738
    [<00000000e942e01c>] __device_attach_driver+0xee/0x110 drivers/base/dd.c:844
    [<00000000de0a5a5c>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:431

Reported-by: syzbot+c9e365d7f450e8aa615d@syzkaller.appspotmail.com
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215063022.16746-1-qiang.zhang@windriver.com

drm/hisilicon: Fix use-after-free

Fix the problem of dev being released twice.
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 75 PID: 15700 at lib/refcount.c:28 refcount_warn_saturate+0xd4/0x150
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : refcount_warn_saturate+0xd4/0x150
lr : refcount_warn_saturate+0xd4/0x150
sp : ffff2028150cbc00
x29: ffff2028150cbc00 x28: ffff2028150121c0
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000000000003
x23: 0000000000000000 x22: ffff2028150cbc90
x21: ffff2020038a30a8 x20: ffff2028150cbc90
x19: ffff0020cd938020 x18: 0000000000000010
x17: 0000000000000000 x16: 0000000000000000
x15: ffffffffffffffff x14: ffff2028950cb88f
x13: ffff2028150cb89d x12: 0000000000000000
x11: 0000000005f5e0ff x10: ffff2028150cb800
x9 : 00000000ffffffd0 x8 : 75203b776f6c6672
x7 : ffff800011a6f7c8 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff202ffe2f9dc0
x1 : ffffa02fecf40000 x0 : 0000000000000026
Call trace:
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
CPU: 75 PID: 15700 Comm: rmmod Tainted: G            E     5.10.0-rc3+ #3
Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDDA, BIOS 0.88 07/24/2019
Call trace:
 dump_backtrace+0x0/0x208
 show_stack+0x2c/0x40
 dump_stack+0xd8/0x10c
 __warn+0xac/0x128
 report_bug+0xcc/0x180
 bug_handler+0x24/0x78
 call_break_hook+0x80/0xa0
 brk_handler+0x28/0x68
 do_debug_exception+0x9c/0x148
 el1_sync_handler+0x7c/0x128
 el1_sync+0x80/0x100
 refcount_warn_saturate+0xd4/0x150
 devm_drm_dev_init_release+0x50/0x70
 devm_action_release+0x20/0x30
 release_nodes+0x13c/0x218
 devres_release_all+0x80/0x170
 device_release_driver_internal+0x128/0x1f0
 driver_detach+0x6c/0xe0
 bus_remove_driver+0x74/0x100
 driver_unregister+0x34/0x60
 pci_unregister_driver+0x24/0xd8
 hibmc_pci_driver_exit+0x14/0xe858 [hibmc_drm]
 __arm64_sys_delete_module+0x1fc/0x2d0
 el0_svc_common.constprop.3+0xa8/0x188
 do_el0_svc+0x80/0xa0
 el0_sync_handler+0x8c/0xb0
 el0_sync+0x15c/0x180
---[ end trace 00718630d6e5ff18 ]---

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1607941973-32287-1-git-send-email-tiantao6@hisilicon.com

drm/vc4: kms: Convert to atomic helpers

Now that the semaphore is gone, our atomic_commit implementation is
basically drm_atomic_helper_commit with a somewhat custom commit_tail,
the main difference being that we're using wait_for_flip_done instead of
wait_for_vblanks used in the drm_atomic_helper_commit_tail helper.

Let's switch to using drm_atomic_helper_commit.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-8-maxime@cerno.tech

drm/vc4: kms: Remove async modeset semaphore

Now that we have proper ordering guaranteed by the previous patch, the
semaphore is redundant and can be removed.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-7-maxime@cerno.tech

drm/vc4: kms: Remove unassigned_channels from the HVS state

The HVS state now has both unassigned_channels that reflects the
channels that are not used in the associated state, and the in_use
boolean for each channel that says whether or not a particular channel
is in use.

Both express pretty much the same thing, and we need the in_use variable
to properly track the commits, so let's get rid of unassigned_channels.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-6-maxime@cerno.tech

drm/vc4: kms: Wait on previous FIFO users before a commit

If we're having two subsequent, non-blocking, commits on two different
CRTCs that share no resources, there's no guarantee on the order of
execution of both commits.

However, the second one will consider the first one as the old state,
and will be in charge of freeing it once that second commit is done.

If the first commit happens after that second commit, it might access
some resources related to its state that has been freed, resulting in a
use-after-free bug.

The standard DRM objects are protected against this, but our HVS private
state isn't so let's make sure we wait for all the previous FIFO users
to finish their commit before going with our own.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-5-maxime@cerno.tech

drm/vc4: Simplify a bit the global atomic_check

When we can't allocate a new channel, we can simply return instead of
having to handle both cases, and that simplifies a bit the code.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-4-maxime@cerno.tech

drm: Document use-after-free gotcha with private objects

The private objects have a gotcha that could result in a use-after-free,
make sure it's properly documented.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-3-maxime@cerno.tech

drm: Introduce an atomic_commit_setup function

Private objects storing a state shared across all CRTCs need to be
carefully handled to avoid a use-after-free issue.

The proper way to do this to track all the commits using that shared
state and wait for the previous commits to be done before going on with
the current one to avoid the reordering of commits that could occur.

However, this commit setup needs to be done after
drm_atomic_helper_setup_commit(), because before the CRTC commit
structure hasn't been allocated before, and before the workqueue is
scheduled, because we would be potentially reordered already otherwise.

That means that drivers currently have to roll their own
drm_atomic_helper_commit() function, even though it would be identical
if not for the commit setup.

Let's introduce a hook to do so that would be called as part of
drm_atomic_helper_commit, allowing us to reuse the atomic helpers.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-2-maxime@cerno.tech

Merge drm/drm-next into drm-misc-next

Required backmerge since we will be based on top of v5.11, and there
has been a request to backmerge already to upstream some features.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'drm-misc-next-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.11:

UAPI Changes:

Cross-subsystem Changes:

 * char/agp: Disable frontend without CONFIG_DRM_LEGACY
 * mm: Fix fput in mmap error path; Introduce vma_set_file() to change
   vma->vm_file

Core Changes:

 * dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code;
   Skip sync for unmapped buffers; Alloc higher order pages is available;
   Respect num_fences when initializing shared fence list
 * doc: Improvements around DRM modes and SCALING_FILTER
 * Pass full state to connector atomic functions + callee updates
 * Cleanups
 * shmem: Map pages with caching by default; Cleanups
 * ttm: Fix DMA32 for global page pool
 * fbdev: Cleanups
 * fb-helper: Update framebuffer after userspace writes; Unmap console buffer
   during shutdown; Rework damage handling of shadow framebuffer

Driver Changes:

 * amdgpu: Multi-hop fixes, Clenaups
 * imx: Fix rotation for Vivante tiled formats; Support nearest-neighour
   skaling; Cleanups
 * mcde: Fix RGB formats; Support DPI output; Cleanups
 * meson: HDMI clock fixes
 * panel: Add driver and bindings for Innolux N125HCE-GN1
 * panel/s6e63m0: More backlight levels; Fix init; Cleanups
 * via: Clenunps
 * virtio: Use fence ID for handling fences; Cleanups

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g

drm/panel: khadas: Fix error code in khadas_ts050_panel_add()

There is a copy and paste bug so it didn't return the correct error
code.

Fixes: b215212117f7 ("drm: panel: add Khadas TS050 panel driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X9NEfmgGilaXJs2R@mwanda

drm/amdkfd: fix ttm size refactor fallout

I guess Christian didn't compile test amdkfd.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Fixes: e11bfb99d6ec ("drm/ttm: cleanup BO size handling v3")
Cc: Christian König <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com> (v1)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214191725.3899147-1-daniel.vetter@ffwll.ch

Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Not a huge amount of big things here, AMD has support for a few new HW
  variants (vangogh, green sardine, dimgrey cavefish), Intel has some
  more DG1 enablement. We have a few big reworks of the TTM layers and
  interfaces, GEM and atomic internal API reworks cross tree. fbdev is
  marked orphaned in here as well to reflect the current reality.

  core:
   - documentation updates
   - deprecate DRM_FORMAT_MOD_NONE
   - atomic crtc enable/disable rework
   - GEM convert drivers to gem object functions
   - remove SCATTER_LIST_MAX_SEGMENT

  sched:
   - avoid infinite waits

  ttm:
   - remove AGP support
   - don't modify caching for swapout
   - ttm pinning rework
   - major TTM reworks
   - new backend allocator
   - multihop support

  vram-helper:
   - top down BO placement fix
   - TTM changes
   - GEM object support

  displayport:
   - DP 2.0 DPCD prep work
   - DP MST extended DPCD caps

  fbdev:
   - mark as orphaned

  amdgpu:
   - Initial Vangogh support
   - Green Sardine support
   - Dimgrey Cavefish support
   - SG display support for renoir
   - SMU7 improvements
   - gfx9+ modiifier support
   - CI BACO fixes

  radeon:
   - expose voltage via hwmon on SUMO

  amdkfd:
   - fix unique id handling

  i915:
   - more DG1 enablement
   - bigjoiner support
   - integer scaling filter support
   - async flip support
   - ICL+ DSI command mode
   - Improve display shutdown
   - Display refactoring
   - eLLC machine fbdev loading fix
   - dma scatterlist fixes
   - TGL hang fixes
   - eLLC display buffer caching on SKL+
   - MOCS PTE seeting for gen9+

  msm:
   - Shutdown hook
   - GPU cooling device support
   - DSI 7nm and 10nm phy/pll updates
   - sm8150/sm2850 DPU support
   - GEM locking re-work
   - LLCC system cache support

  aspeed:
   - sysfs output config support

  ast:
   - LUT fix
   - new display mode

  gma500:
   - remove 2d framebuffer accel

  panfrost:
   - move gpu reset to a worker

  exynos:
   - new HDMI mode support

  mediatek:
   - MT8167 support
   - yaml bindings
   - MIPI DSI phy code moved

  etnaviv:
   - new perf counter
   - more lockdep annotation

  hibmc:
   - i2c DDC support

  ingenic:
   - pixel clock reset fix
   - reserved memory support
   - allow both DMA channels at once
   - different pixel format support
   - 30/24/8-bit palette modes

  tilcdc:
   - don't keep vblank irq enabled

  vc4:
   - new maintainer added
   - DSI registration fix

  virtio:
   - blob resource support
   - host visible and cross-device support
   - uuid api support"

* tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits)
  drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
  drm/amdgpu: fix size calculation with stolen vga memory
  drm/amdgpu: remove amdgpu_ttm_late_init  and amdgpu_bo_late_init
  drm/amdgpu: free the pre-OS console framebuffer after the first modeset
  drm/amdgpu: enable runtime pm using BACO on CI dGPUs
  drm/amdgpu/cik: enable BACO reset on Bonaire
  drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
  drm/amd/pm: remove one unsupported smu function for vangogh
  drm/amd/display: setup system context for APUs
  drm/amd/display: add S/G support for Vangogh
  drm/amdkfd: Fix leak in dmabuf import
  drm/amdgpu: use AMDGPU_NUM_VMID when possible
  drm/amdgpu: fix sdma instance fw version and feature version init
  drm/amd/pm: update driver if version for dimgrey_cavefish
  drm/amd/display: 3.2.115
  drm/amd/display: [FW Promotion] Release 0.0.45
  drm/amd/display: Revert DCN2.1 dram_clock_change_latency update
  drm/amd/display: Enable gpu_vm_support for dcn3.01
  drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on
  drm/amd/display: Add wm table for Renoir
  ...

drm/ttm: cleanup BO size handling v3

Based on an idea from Dave, but cleaned up a bit.

We had multiple fields for essentially the same thing.

Now bo->base.size is the original size of the BO in
arbitrary units, usually bytes.

bo->mem.num_pages is the size in number of pages in the
resource domain of bo->mem.mem_type.

v2: use the GEM object size instead of the BO size
v3: fix printks in some places

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/406831/

drm/drv: Remove invalid assignments

it's not necessary to assign a value of 0 to ret here, because if
the previous functions were executed correctly, ret would be 0.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/1607653037-37785-1-git-send-email-tiantao6@hisilicon.com