x86/topology: Use total_cpus for max logical packages calculation

[ Upstream commit aa02ef099cff042c2a9109782ec2bf1bffc955d4 ]

nr_cpu_ids can be limited on the command line via nr_cpus=. This can break the
logical package management because it results in a smaller number of packages
while in kdump kernel.

Check below case:
There is a two sockets system, each socket has 8 cores, which has 16 logical
cpus while HT was turn on.

 0  1  2  3  4  5  6  7     |    16 17 18 19 20 21 22 23
 cores on socket 0               threads on socket 0
 8  9 10 11 12 13 14 15     |    24 25 26 27 28 29 30 31
 cores on socket 1               threads on socket 1

While starting the kdump kernel with command line option nr_cpus=16 panic
was triggered on one of the cpus 24-31 eg. 26, then online cpu will be
1-15, 26(cpu 0 was disabled in kdump), ncpus will be 16 and
__max_logical_packages will be 1, but actually two packages were booted on.

This issue can reproduced by set kdump option nr_cpus=<real physical core
numbers>, and then trigger panic on last socket's thread, for example:

taskset -c 26 echo c > /proc/sysrq-trigger

Use total_cpus which will not be limited by nr_cpus command line to calculate
the value of __max_logical_packages.

Signed-off-by: Hui Wang <john.wanghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <guijianfeng@huawei.com>
Cc: <wencongyang2@huawei.com>
Cc: <douliyang1@huawei.com>
Cc: <qiaonuohan@huawei.com>
Link: https://lkml.kernel.org/r/20181107023643.22174-1-john.wanghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipt_CLUSTERIP: fix deadlock in netns exit routine

[ Upstream commit 5a86d68bcf02f2d1e9a5897dd482079fd5f75e7f ]

When network namespace is destroyed, cleanup_net() is called.
cleanup_net() holds pernet_ops_rwsem then calls each ->exit callback.
So that clusterip_tg_destroy() is called by cleanup_net().
And clusterip_tg_destroy() calls unregister_netdevice_notifier().

But both cleanup_net() and clusterip_tg_destroy() hold same
lock(pernet_ops_rwsem). hence deadlock occurrs.

After this patch, only 1 notifier is registered when module is inserted.
And all of configs are added to per-net list.

test commands:
   %ip netns add vm1
   %ip netns exec vm1 bash
   %ip link set lo up
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
-j CLUSTERIP --new --hashmode sourceip \
--clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
   %exit
   %ip netns del vm1

splat looks like:
[  341.809674] ============================================
[  341.809674] WARNING: possible recursive locking detected
[  341.809674] 4.19.0-rc5+ #16 Tainted: G        W
[  341.809674] --------------------------------------------
[  341.809674] kworker/u4:2/87 is trying to acquire lock:
[  341.809674] 000000005da2d519 (pernet_ops_rwsem){++++}, at: unregister_netdevice_notifier+0x8c/0x460
[  341.809674]
[  341.809674] but task is already holding lock:
[  341.809674] 000000005da2d519 (pernet_ops_rwsem){++++}, at: cleanup_net+0x119/0x900
[  341.809674]
[  341.809674] other info that might help us debug this:
[  341.809674]  Possible unsafe locking scenario:
[  341.809674]
[  341.809674]        CPU0
[  341.809674]        ----
[  341.809674]   lock(pernet_ops_rwsem);
[  341.809674]   lock(pernet_ops_rwsem);
[  341.809674]
[  341.809674]  *** DEADLOCK ***
[  341.809674]
[  341.809674]  May be due to missing lock nesting notation
[  341.809674]
[  341.809674] 3 locks held by kworker/u4:2/87:
[  341.809674]  #0: 00000000d9df6c92 ((wq_completion)"%s""netns"){+.+.}, at: process_one_work+0xafe/0x1de0
[  341.809674]  #1: 00000000c2cbcee2 (net_cleanup_work){+.+.}, at: process_one_work+0xb60/0x1de0
[  341.809674]  #2: 000000005da2d519 (pernet_ops_rwsem){++++}, at: cleanup_net+0x119/0x900
[  341.809674]
[  341.809674] stack backtrace:
[  341.809674] CPU: 1 PID: 87 Comm: kworker/u4:2 Tainted: G        W         4.19.0-rc5+ #16
[  341.809674] Workqueue: netns cleanup_net
[  341.809674] Call Trace:
[ ... ]
[  342.070196]  down_write+0x93/0x160
[  342.070196]  ? unregister_netdevice_notifier+0x8c/0x460
[  342.070196]  ? down_read+0x1e0/0x1e0
[  342.070196]  ? sched_clock_cpu+0x126/0x170
[  342.070196]  ? find_held_lock+0x39/0x1c0
[  342.070196]  unregister_netdevice_notifier+0x8c/0x460
[  342.070196]  ? register_netdevice_notifier+0x790/0x790
[  342.070196]  ? __local_bh_enable_ip+0xe9/0x1b0
[  342.070196]  ? __local_bh_enable_ip+0xe9/0x1b0
[  342.070196]  ? clusterip_tg_destroy+0x372/0x650 [ipt_CLUSTERIP]
[  342.070196]  ? trace_hardirqs_on+0x93/0x210
[  342.070196]  ? __bpf_trace_preemptirq_template+0x10/0x10
[  342.070196]  ? clusterip_tg_destroy+0x372/0x650 [ipt_CLUSTERIP]
[  342.123094]  clusterip_tg_destroy+0x3ad/0x650 [ipt_CLUSTERIP]
[  342.123094]  ? clusterip_net_init+0x3d0/0x3d0 [ipt_CLUSTERIP]
[  342.123094]  ? cleanup_match+0x17d/0x200 [ip_tables]
[  342.123094]  ? xt_unregister_table+0x215/0x300 [x_tables]
[  342.123094]  ? kfree+0xe2/0x2a0
[  342.123094]  cleanup_entry+0x1d5/0x2f0 [ip_tables]
[  342.123094]  ? cleanup_match+0x200/0x200 [ip_tables]
[  342.123094]  __ipt_unregister_table+0x9b/0x1a0 [ip_tables]
[  342.123094]  iptable_filter_net_exit+0x43/0x80 [iptable_filter]
[  342.123094]  ops_exit_list.isra.10+0x94/0x140
[  342.123094]  cleanup_net+0x45b/0x900
[ ... ]

Fixes: 202f59afd441 ("netfilter: ipt_CLUSTERIP: do not hold dev")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine

[ Upstream commit b12f7bad5ad3724d19754390a3e80928525c0769 ]

When network namespace is destroyed, both clusterip_tg_destroy() and
clusterip_net_exit() are called. and clusterip_net_exit() is called
before clusterip_tg_destroy().
Hence cleanup check code in clusterip_net_exit() doesn't make sense.

test commands:
   %ip netns add vm1
   %ip netns exec vm1 bash
   %ip link set lo up
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
-j CLUSTERIP --new --hashmode sourceip \
--clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
   %exit
   %ip netns del vm1

splat looks like:
[  341.184508] WARNING: CPU: 1 PID: 87 at net/ipv4/netfilter/ipt_CLUSTERIP.c:840 clusterip_net_exit+0x319/0x380 [ipt_CLUSTERIP]
[  341.184850] Modules linked in: ipt_CLUSTERIP nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_tcpudp iptable_filter bpfilter ip_tables x_tables
[  341.184850] CPU: 1 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc5+ #16
[  341.227509] Workqueue: netns cleanup_net
[  341.227509] RIP: 0010:clusterip_net_exit+0x319/0x380 [ipt_CLUSTERIP]
[  341.227509] Code: 0f 85 7f fe ff ff 48 c7 c2 80 64 2c c0 be a8 02 00 00 48 c7 c7 a0 63 2c c0 c6 05 18 6e 00 00 01 e8 bc 38 ff f5 e9 5b fe ff ff <0f> 0b e9 33 ff ff ff e8 4b 90 50 f6 e9 2d fe ff ff 48 89 df e8 de
[  341.227509] RSP: 0018:ffff88011086f408 EFLAGS: 00010202
[  341.227509] RAX: dffffc0000000000 RBX: 1ffff1002210de85 RCX: 0000000000000000
[  341.227509] RDX: 1ffff1002210de85 RSI: ffff880110813be8 RDI: ffffed002210de58
[  341.227509] RBP: ffff88011086f4d0 R08: 0000000000000000 R09: 0000000000000000
[  341.227509] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1002210de81
[  341.227509] R13: ffff880110625a48 R14: ffff880114cec8c8 R15: 0000000000000014
[  341.227509] FS:  0000000000000000(0000) GS:ffff880116600000(0000) knlGS:0000000000000000
[  341.227509] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  341.227509] CR2: 00007f11fd38e000 CR3: 000000013ca16000 CR4: 00000000001006e0
[  341.227509] Call Trace:
[  341.227509]  ? __clusterip_config_find+0x460/0x460 [ipt_CLUSTERIP]
[  341.227509]  ? default_device_exit+0x1ca/0x270
[  341.227509]  ? remove_proc_entry+0x1cd/0x390
[  341.227509]  ? dev_change_net_namespace+0xd00/0xd00
[  341.227509]  ? __init_waitqueue_head+0x130/0x130
[  341.227509]  ops_exit_list.isra.10+0x94/0x140
[  341.227509]  cleanup_net+0x45b/0x900
[ ... ]

Fixes: 613d0776d3fe ("netfilter: exit_net cleanup check added")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set

[ Upstream commit 06aa151ad1fc74a49b45336672515774a678d78d ]

If same destination IP address config is already existing, that config is
just used. MAC address also should be same.
However, there is no MAC address checking routine.
So that MAC address checking routine is added.

test commands:
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
   -j CLUSTERIP --new --hashmode sourceip \
   --clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
   -j CLUSTERIP --new --hashmode sourceip \
   --clustermac 01:00:5e:00:00:21 --total-nodes 2 --local-node 1

After this patch, above commands are disallowed.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf vendor events intel: Fix Load_Miss_Real_Latency on SKL/SKX

[ Upstream commit 91b2b97025097ce7ca7536bc87eba2bf14760fb4 ]

Fix incorrect event names for the Load_Miss_Real_Latency metric for
Skylake and Skylake Server.

Fixes https://github.com/andikleen/pmu-tools/issues/158

Before:

  % perf stat -M Load_Miss_Real_Latency true
  event syntax error: '..ss.pending,mem_load_retired.l1_miss_ps,mem_load_retired.fb_hit_ps}:W'
                                    \___ parser error

   Usage: perf stat [<options>] [<command>]

      -M, --metrics <metric/metric group list>
                            monitor specified metrics or metric groups (separated by ,)

After:

  % perf stat -M Load_Miss_Real_Latency true

   Performance counter stats for 'true':

             279,204      l1d_pend_miss.pending     #     14.0 Load_Miss_Real_Latency
               4,784      mem_load_uops_retired.l1_miss
              15,188      mem_load_uops_retired.hit_lfb

         0.000899640 seconds time elapsed

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20181120050635.4215-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf parse-events: Fix unchecked usage of strncpy()

[ Upstream commit bd8d57fb7e25e9fcf67a9eef5fa13aabe2016e07 ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  util/parse-events.c: In function 'print_symbol_events':
  util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
      strncpy(name, syms->symbol, MAX_NAME_LEN);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'print_symbol_events.constprop',
      inlined from 'print_events' at util/parse-events.c:2508:2:
  util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
      strncpy(name, syms->symbol, MAX_NAME_LEN);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'print_symbol_events.constprop',
      inlined from 'print_events' at util/parse-events.c:2511:2:
  util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
      strncpy(name, syms->symbol, MAX_NAME_LEN);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 947b4ad1d198 ("perf list: Fix max event string size")
Link: https://lkml.kernel.org/n/tip-b663e33bm6x8hrkie4uxh7u2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf svghelper: Fix unchecked usage of strncpy()

[ Upstream commit 2f5302533f306d5ee87bd375aef9ca35b91762cb ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

In this specific case this would only happen if fgets() was buggy, as
its man page states that it should read one less byte than the size of
the destination buffer, so that it can put the nul byte at the end of
it, so it would never copy 255 non-nul chars, as fgets reads into the
orig buffer at most 254 non-nul chars and terminates it. But lets just
switch to strlcpy to keep the original intent and silence the gcc 8.2
warning.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  In function 'cpu_model',
      inlined from 'svg_cpu_box' at util/svghelper.c:378:2:
  util/svghelper.c:337:5: error: 'strncpy' output may be truncated copying 255 bytes from a string of length 255 [-Werror=stringop-truncation]
       strncpy(cpu_m, &buf[13], 255);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Fixes: f48d55ce7871 ("perf: Add a SVG helper library file")
Link: https://lkml.kernel.org/n/tip-xzkoo0gyr56gej39ltivuh9g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests ARM: Disable breakpoint tests 32-bit

[ Upstream commit 24f967337f6d6bce931425769c0f5ff5cf2d212e ]

The breakpoint tests on the ARM 32-bit kernel are broken in several
ways.

The breakpoint length requested does not necessarily match whether the
function address has the Thumb bit (bit 0) set or not, and this does
matter to the ARM kernel hw_breakpoint infrastructure. See [1] for
background.

[1]: https://lkml.org/lkml/2018/11/15/205

As Will indicated, the overflow handling would require single-stepping
which is not supported at the moment. Just disable those tests for the
ARM 32-bit platforms and update the comment above to explain these
limitations.

Co-developed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181203191138.2419-1-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf intel-pt: Fix error with config term "pt=0"

[ Upstream commit 1c6f709b9f96366cc47af23c05ecec9b8c0c392d ]

Users should never use 'pt=0', but if they do it may give a meaningless
error:

$ perf record -e intel_pt/pt=0/u uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for
event (intel_pt/pt=0/u).

Fix that by forcing 'pt=1'.

Committer testing:

  # perf record -e intel_pt/pt=0/u uname
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u).
  /bin/dmesg | grep -i perf may provide additional information.

  # perf record -e intel_pt/pt=0/u uname
  pt=0 doesn't make sense, forcing pt=1
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.020 MB perf.data ]
  #

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/b7c5b4e5-9497-10e5-fd43-5f3e4a0fe51d@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty/serial: do not free trasnmit buffer page under port lock

[ Upstream commit d72402145ace0697a6a9e8e75a3de5bf3375f78d ]

LKP has hit yet another circular locking dependency between uart
console drivers and debugobjects [1]:

     CPU0                                    CPU1

                                            rhltable_init()
                                             __init_work()
                                              debug_object_init
     uart_shutdown()                          /* db->lock */
      /* uart_port->lock */                    debug_print_object()
       free_page()                              printk()
                                                 call_console_drivers()
        debug_check_no_obj_freed()                /* uart_port->lock */
         /* db->lock */
          debug_print_object()

So there are two dependency chains:
uart_port->lock -> db->lock
And
db->lock -> uart_port->lock

This particular circular locking dependency can be addressed in several
ways:

a) One way would be to move debug_print_object() out of db->lock scope
   and, thus, break the db->lock -> uart_port->lock chain.
b) Another one would be to free() transmit buffer page out of db->lock
   in UART code; which is what this patch does.

It makes sense to apply a) and b) independently: there are too many things
going on behind free(), none of which depend on uart_port->lock.

The patch fixes transmit buffer page free() in uart_shutdown() and,
additionally, in uart_port_startup() (as was suggested by Dmitry Safonov).

[1] https://lore.kernel.org/lkml/20181211091154.GL23332@shao2-debian/T/#u
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: improve error handling of btrfs_add_link

[ Upstream commit 1690dd41e0cb1dade80850ed8a3eb0121b96d22f ]

In the error handling block, err holds the return value of either
btrfs_del_root_ref() or btrfs_del_inode_ref() but it hasn't been checked
since it's introduction with commit fe66a05a0679 (Btrfs: improve error
handling for btrfs_insert_dir_item callers) in 2012.

If the error handling in the error handling fails, there's not much left
to do and the abort either happened earlier in the callees or is
necessary here.

So if one of btrfs_del_root_ref() or btrfs_del_inode_ref() failed, abort
the transaction, but still return the original code of the failure
stored in 'ret' as this will be reported to the user.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix use-after-free due to race between replace start and cancel

[ Upstream commit d189dd70e2556181732598956d808ea53cc8774e ]

The device replace cancel thread can race with the replace start thread
and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will
fail to stop the scrub thread.

The scrub thread continues with the scrub for replace which then will
try to write to the target device and which is already freed by the
cancel thread.

scrub_setup_ctx() warns as tgtdev is NULL.

  struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace)
  {
  ...
  if (is_dev_replace) {
  WARN_ON(!fs_info->dev_replace.tgtdev);  <===
  sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO;
  sctx->wr_tgtdev = fs_info->dev_replace.tgtdev;
  sctx->flush_all_writes = false;
  }

  [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started
  [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled
  [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs]
  ...
  [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs]
  ...
  [ 6852.432970] Call Trace:
  [ 6852.433202]  btrfs_scrub_dev+0x19b/0x5c0 [btrfs]
  [ 6852.433471]  btrfs_dev_replace_start+0x48c/0x6a0 [btrfs]
  [ 6852.433800]  btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs]
  [ 6852.434097]  btrfs_ioctl+0x2476/0x2d20 [btrfs]
  [ 6852.434365]  ? do_sigaction+0x7d/0x1e0
  [ 6852.434623]  do_vfs_ioctl+0xa9/0x6c0
  [ 6852.434865]  ? syscall_trace_enter+0x1c8/0x310
  [ 6852.435124]  ? syscall_trace_enter+0x1c8/0x310
  [ 6852.435387]  ksys_ioctl+0x60/0x90
  [ 6852.435663]  __x64_sys_ioctl+0x16/0x20
  [ 6852.435907]  do_syscall_64+0x50/0x180
  [ 6852.436150]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Further, as the replace thread enters scrub_write_page_to_dev_replace()
without the target device it panics:

  static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx,
      struct scrub_page *spage)
  {
  ...
bio_set_dev(bio, sbio->dev->bdev); <======

  [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
  ..
  [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs]
  [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260
  [btrfs]
  ..
  [ 6929.721430] Call Trace:
  [ 6929.721663]  scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs]
  [ 6929.721975]  scrub_bio_end_io_worker+0x1af/0x490 [btrfs]
  [ 6929.722277]  normal_work_helper+0xf0/0x4c0 [btrfs]
  [ 6929.722552]  process_one_work+0x1f4/0x520
  [ 6929.722805]  ? process_one_work+0x16e/0x520
  [ 6929.723063]  worker_thread+0x46/0x3d0
  [ 6929.723313]  kthread+0xf8/0x130
  [ 6929.723544]  ? process_one_work+0x520/0x520
  [ 6929.723800]  ? kthread_delayed_work_timer_fn+0x80/0x80
  [ 6929.724081]  ret_from_fork+0x3a/0x50

Fix this by letting the btrfs_dev_replace_finishing() to do the job of
cleaning after the cancel, including freeing of the target device.
btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns
along with the scrub return status.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: alloc_chunk: fix more DUP stripe size handling

[ Upstream commit baf92114c7e6dd6124aa3d506e4bc4b694da3bc3 ]

Commit 92e222df7b "btrfs: alloc_chunk: fix DUP stripe size handling"
fixed calculating the stripe_size for a new DUP chunk.

However, the same calculation reappears a bit later, and that one was
not changed yet. The resulting bug that is exposed is that the newly
allocated device extents ('stripes') can have a few MiB overlap with the
next thing stored after them, which is another device extent or the end
of the disk.

The scenario in which this can happen is:
* The block device for the filesystem is less than 10GiB in size.
* The amount of contiguous free unallocated disk space chosen to use for
  chunk allocation is 20% of the total device size, or a few MiB more or
  less.

An example:
- The filesystem device is 7880MiB (max_chunk_size gets set to 788MiB)
- There's 1578MiB unallocated raw disk space left in one contiguous
  piece.

In this case stripe_size is first calculated as 789MiB, (half of
1578MiB).

Since 789MiB (stripe_size * data_stripes) > 788MiB (max_chunk_size), we
enter the if block. Now stripe_size value is immediately overwritten
while calculating an adjusted value based on max_chunk_size, which ends
up as 788MiB.

Next, the value is rounded up to a 16MiB boundary, 800MiB, which is
actually more than the value we had before. However, the last comparison
fails to detect this, because it's comparing the value with the total
amount of free space, which is about twice the size of stripe_size.

In the example above, this means that the resulting raw disk space being
allocated is 1600MiB, while only a gap of 1578MiB has been found. The
second device extent object for this DUP chunk will overlap for 22MiB
with whatever comes next.

The underlying problem here is that the stripe_size is reused all the
time for different things. So, when entering the code in the if block,
stripe_size is immediately overwritten with something else. If later we
decide we want to have the previous value back, then the logic to
compute it was copy pasted in again.

With this change, the value in stripe_size is not unnecessarily
destroyed, so the duplicated calculation is not needed any more.

Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: volumes: Make sure there is no overlap of dev extents at mount time

[ Upstream commit 5eb193812a42dc49331f25137a38dfef9612d3e4 ]

Enhance btrfs_verify_dev_extents() to remember previous checked dev
extents, so it can verify no dev extents can overlap.

Analysis from Hans:

"Imagine allocating a DATA|DUP chunk.

 In the chunk allocator, we first set...
   max_stripe_size = SZ_1G;
   max_chunk_size = BTRFS_MAX_DATA_CHUNK_SIZE
 ... which is 10GiB.

 Then...
   /* we don't want a chunk larger than 10% of writeable space */
   max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1),
         max_chunk_size);

 Imagine we only have one 7880MiB block device in this filesystem. Now
 max_chunk_size is down to 788MiB.

 The next step in the code is to search for max_stripe_size * dev_stripes
 amount of free space on the device, which is in our example 1GiB * 2 =
 2GiB. Imagine the device has exactly 1578MiB free in one contiguous
 piece. This amount of bytes will be put in devices_info[ndevs - 1].max_avail

 Next we recalculate the stripe_size (which is actually the device extent
 length), based on the actual maximum amount of available raw disk space:
   stripe_size = div_u64(devices_info[ndevs - 1].max_avail, dev_stripes);

 stripe_size is now 789MiB

 Next we do...
   data_stripes = num_stripes / ncopies
 ...where data_stripes ends up as 1, because num_stripes is 2 (the amount
 of device extents we're going to have), and DUP has ncopies 2.

 Next there's a check...
   if (stripe_size * data_stripes > max_chunk_size)
 ...which matches because 789MiB * 1 > 788MiB.

 We go into the if code, and next is...
   stripe_size = div_u64(max_chunk_size, data_stripes);
 ...which resets stripe_size to max_chunk_size: 788MiB

 Next is a fun one...
   /* bump the answer up to a 16MB boundary */
   stripe_size = round_up(stripe_size, SZ_16M);
 ...which changes stripe_size from 788MiB to 800MiB.

 We're not done changing stripe_size yet...
   /* But don't go higher than the limits we found while searching
    * for free extents
    */
   stripe_size = min(devices_info[ndevs - 1].max_avail,
              stripe_size);

 This is bad. max_avail is twice the stripe_size (we need to fit 2 device
 extents on the same device for DUP).

 The result here is that 800MiB < 1578MiB, so it's unchanged. However,
 the resulting DUP chunk will need 1600MiB disk space, which isn't there,
 and the second dev_extent might extend into the next thing (next
 dev_extent? end of device?) for 22MiB.

 The last shown line of code relies on a situation where there's twice
 the value of stripe_size present as value for the variable stripe_size
 when it's DUP. This was actually the case before commit 92e222df7b
 "btrfs: alloc_chunk: fix DUP stripe size handling", from which I quote:
   "[...] in the meantime there's a check to see if the stripe_size does
 not exceed max_chunk_size. Since during this check stripe_size is twice
 the amount as intended, the check will reduce the stripe_size to
 max_chunk_size if the actual correct to be used stripe_size is more than
 half the amount of max_chunk_size."

 In the previous version of the code, the 16MiB alignment (why is this
 done, by the way?) would result in a 50% chance that it would actually
 do an 8MiB alignment for the individual dev_extents, since it was
 operating on double the size. Does this matter?

 Does it matter that stripe_size can be set to anything which is not
 16MiB aligned because of the amount of remaining available disk space
 which is just taken?

 What is the main purpose of this round_up?

 The most straightforward thing to do seems something like...
   stripe_size = min(
       div_u64(devices_info[ndevs - 1].max_avail, dev_stripes),
       stripe_size
   )
 ..just putting half of the max_avail into stripe_size."

Link: https://lore.kernel.org/linux-btrfs/b3461a38-e5f8-f41d-c67c-2efac8129054@mendix.com/
Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ add analysis from report ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: atmel-mci: do not assume idle after atmci_request_end

[ Upstream commit ae460c115b7aa50c9a36cf78fced07b27962c9d0 ]

On our AT91SAM9260 board we use the same sdio bus for wifi and for the
sd card slot. This caused the atmel-mci to give the following splat on
the serial console:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 538 at drivers/mmc/host/atmel-mci.c:859 atmci_send_command+0x24/0x44
  Modules linked in:
  CPU: 0 PID: 538 Comm: mmcqd/0 Not tainted 4.14.76 #14
  Hardware name: Atmel AT91SAM9
  [<c000fccc>] (unwind_backtrace) from [<c000d3dc>] (show_stack+0x10/0x14)
  [<c000d3dc>] (show_stack) from [<c0017644>] (__warn+0xd8/0xf4)
  [<c0017644>] (__warn) from [<c0017704>] (warn_slowpath_null+0x1c/0x24)
  [<c0017704>] (warn_slowpath_null) from [<c033bb9c>] (atmci_send_command+0x24/0x44)
  [<c033bb9c>] (atmci_send_command) from [<c033e984>] (atmci_start_request+0x1f4/0x2dc)
  [<c033e984>] (atmci_start_request) from [<c033f3b4>] (atmci_request+0xf0/0x164)
  [<c033f3b4>] (atmci_request) from [<c0327108>] (mmc_start_request+0x280/0x2d0)
  [<c0327108>] (mmc_start_request) from [<c032800c>] (mmc_start_areq+0x230/0x330)
  [<c032800c>] (mmc_start_areq) from [<c03366f8>] (mmc_blk_issue_rw_rq+0xc4/0x310)
  [<c03366f8>] (mmc_blk_issue_rw_rq) from [<c03372c4>] (mmc_blk_issue_rq+0x118/0x5ac)
  [<c03372c4>] (mmc_blk_issue_rq) from [<c033781c>] (mmc_queue_thread+0xc4/0x118)
  [<c033781c>] (mmc_queue_thread) from [<c002daf8>] (kthread+0x100/0x118)
  [<c002daf8>] (kthread) from [<c000a580>] (ret_from_fork+0x14/0x34)
  ---[ end trace 594371ddfa284bd6 ]---

This is:
  WARN_ON(host->cmd);

This was fixed on our board by letting atmci_request_end determine what
state we are in. Instead of unconditionally setting it to STATE_IDLE on
STATE_END_REQUEST.

Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: fix memory leak when EOF is encountered in quotation

[ Upstream commit fbac5977d81cb2b2b7e37b11c459055d9585273c ]

An unterminated string literal followed by new line is passed to the
parser (with "multi-line strings not supported" warning shown), then
handled properly there.

On the other hand, an unterminated string literal at end of file is
never passed to the parser, then results in memory leak.

[Test Code]

  ----------(Kconfig begin)----------
  source "Kconfig.inc"

  config A
          bool "a"
  -----------(Kconfig end)-----------

  --------(Kconfig.inc begin)--------
  config B
          bool "b\No new line at end of file
  ---------(Kconfig.inc end)---------

[Summary from Valgrind]

  Before the fix:

    LEAK SUMMARY:
       definitely lost: 16 bytes in 1 blocks
       ...

  After the fix:

    LEAK SUMMARY:
       definitely lost: 0 bytes in 0 blocks
       ...

Eliminate the memory leak path by handling this case. Of course, such
a Kconfig file is wrong already, so I will add an error message later.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kconfig: fix file name and line number of warn_ignored_character()

[ Upstream commit 77c1c0fa8b1477c5799bdad65026ea5ff676da44 ]

Currently, warn_ignore_character() displays invalid file name and
line number.

The lexer should use current_file->name and yylineno, while the parser
should use zconf_curname() and zconf_lineno().

This difference comes from that the lexer is always going ahead
of the parser. The parser needs to look ahead one token to make a
shift/reduce decision, so the lexer is requested to scan more text
from the input file.

This commit fixes the warning message from warn_ignored_character().

[Test Code]

  ----(Kconfig begin)----
  /
  -----(Kconfig end)-----

[Output]

  Before the fix:

  <none>:0:warning: ignoring unsupported character '/'

  After the fix:

  Kconfig:1:warning: ignoring unsupported character '/'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: relax verifier restriction on BPF_MOV | BPF_ALU

[ Upstream commit e434b8cdf788568ba65a0a0fd9f3cb41f3ca1803 ]

Currently, the destination register is marked as unknown for 32-bit
sub-register move (BPF_MOV | BPF_ALU) whenever the source register type is
SCALAR_VALUE.

This is too conservative that some valid cases will be rejected.
Especially, this may turn a constant scalar value into unknown value that
could break some assumptions of verifier.

For example, test_l4lb_noinline.c has the following C code:

    struct real_definition *dst

1:  if (!get_packet_dst(&dst, &pckt, vip_info, is_ipv6))
2:    return TC_ACT_SHOT;
3:
4:  if (dst->flags & F_IPV6) {

get_packet_dst is responsible for initializing "dst" into valid pointer and
return true (1), otherwise return false (0). The compiled instruction
sequence using alu32 will be:

  412: (54) (u32) r7 &= (u32) 1
  413: (bc) (u32) r0 = (u32) r7
  414: (95) exit

insn 413, a BPF_MOV | BPF_ALU, however will turn r0 into unknown value even
r7 contains SCALAR_VALUE 1.

This causes trouble when verifier is walking the code path that hasn't
initialized "dst" inside get_packet_dst, for which case 0 is returned and
we would then expect verifier concluding line 1 in the above C code pass
the "if" check, therefore would skip fall through path starting at line 4.
Now, because r0 returned from callee has became unknown value, so verifier
won't skip analyzing path starting at line 4 and "dst->flags" requires
dereferencing the pointer "dst" which actually hasn't be initialized for
this path.

This patch relaxed the code marking sub-register move destination. For a
SCALAR_VALUE, it is safe to just copy the value from source then truncate
it into 32-bit.

A unit test also included to demonstrate this issue. This test will fail
before this patch.

This relaxation could let verifier skipping more paths for conditional
comparison against immediate. It also let verifier recording a more
accurate/strict value for one register at one state, if this state end up
with going through exit without rejection and it is used for state
comparison later, then it is possible an inaccurate/permissive value is
better. So the real impact on verifier processed insn number is complex.
But in all, without this fix, valid program could be rejected.

>From real benchmarking on kernel selftests and Cilium bpf tests, there is
no impact on processed instruction number when tests ares compiled with
default compilation options. There is slightly improvements when they are
compiled with -mattr=+alu32 after this patch.

Also, test_xdp_noinline/-mattr=+alu32 now passed verification. It is
rejected before this fix.

Insn processed before/after this patch:

                        default     -mattr=+alu32

Kernel selftest

===
test_xdp.o              371/371      369/369
test_l4lb.o             6345/6345    5623/5623
test_xdp_noinline.o     2971/2971    rejected/2727
test_tcp_estates.o      429/429      430/430

Cilium bpf
===
bpf_lb-DLB_L3.o:        2085/2085     1685/1687
bpf_lb-DLB_L4.o:        2287/2287     1986/1982
bpf_lb-DUNKNOWN.o:      690/690       622/622
bpf_lxc.o:              95033/95033   N/A
bpf_netdev.o:           7245/7245     N/A
bpf_overlay.o:          2898/2898     3085/2947

NOTE:
  - bpf_lxc.o and bpf_netdev.o compiled by -mattr=+alu32 are rejected by
    verifier due to another issue inside verifier on supporting alu32
    binary.
  - Each cilium bpf program could generate several processed insn number,
    above number is sum of them.

v1->v2:
 - Restrict the change on SCALAR_VALUE.
 - Update benchmark numbers on Cilium bpf tests.

Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Fix minor issues with the dcache_by_line_op macro

[ Upstream commit 33309ecda0070506c49182530abe7728850ebe78 ]

The dcache_by_line_op macro suffers from a couple of small problems:

First, the GAS directives that are currently being used rely on
assembler behavior that is not documented, and probably not guaranteed
to produce the correct behavior going forward. As a result, we end up
with some undefined symbols in cache.o:

$ nm arch/arm64/mm/cache.o
         ...
         U civac
         ...
         U cvac
         U cvap
         U cvau

This is due to the fact that the comparisons used to select the
operation type in the dcache_by_line_op macro are comparing symbols
not strings, and even though it seems that GAS is doing the right
thing here (undefined symbols by the same name are equal to each
other), it seems unwise to rely on this.

Second, when patching in a DC CVAP instruction on CPUs that support it,
the fallback path consists of a DC CVAU instruction which may be
affected by CPU errata that require ARM64_WORKAROUND_CLEAN_CACHE.

Solve these issues by unrolling the various maintenance routines and
using the conditional directives that are documented as operating on
strings. To avoid the complexity of nested alternatives, we move the
DC CVAP patching to __clean_dcache_area_pop, falling back to a branch
to __clean_dcache_area_poc if DCPOP is not supported by the CPU.

Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx6q: reset exclusive gates on init

[ Upstream commit f7542d817733f461258fd3a47d77da35b2d9fc81 ]

The exclusive gates may be set up in the wrong way by software running
before the clock driver comes up. In that case the exclusive setup is
locked in its initial state, as the complementary function can't be
activated without disabling the initial setup first.

To avoid this lock situation, reset the exclusive gates to the off
state and allow the kernel to provide the proper setup.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: kasan: Increase stack size for KASAN_EXTRA

[ Upstream commit 6e8830674ea77f57d57a33cca09083b117a71f41 ]

If the kernel is configured with KASAN_EXTRA, the stack size is
increased significantly due to setting the GCC -fstack-reuse option to
"none" [1]. As a result, it can trigger a stack overrun quite often with
32k stack size compiled using GCC 8. For example, this reproducer

  https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c

can trigger a "corrupted stack end detected inside scheduler" very
reliably with CONFIG_SCHED_STACK_END_CHECK enabled. There are other
reports at:

  https://lore.kernel.org/lkml/1542144497.12945.29.camel@gmx.us/
  https://lore.kernel.org/lkml/721E7B42-2D55-4866-9C1A-3E8D64F33F9C@gmx.us/

There are just too many functions that could have a large stack with
KASAN_EXTRA due to large local variables that have been called over and
over again without being able to reuse the stacks. Some noticiable ones
are,

size
7536 shrink_inactive_list
7440 shrink_page_list
6560 fscache_stats_show
3920 jbd2_journal_commit_transaction
3216 try_to_unmap_one
3072 migrate_page_move_mapping
3584 migrate_misplaced_transhuge_page
3920 ip_vs_lblcr_schedule
4304 lpfc_nvme_info_show
3888 lpfc_debugfs_nvmestat_data.constprop

There are other 49 functions over 2k in size while compiling kernel with
"-Wframe-larger-than=" on this machine. Hence, it is too much work to
change Makefiles for each object to compile without
-fsanitize-address-use-after-scope individually.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: do not macro-expand failed assertion expressions

[ Upstream commit b708a3cc9600390ccaa2b68a88087dd265154b2b ]

I've stumbled over the current macro-expand behaviour of the test
harness:

$ gcc -Wall -xc - <<'__EOF__'
TEST(macro) {
int status = 0;
ASSERT_TRUE(WIFSIGNALED(status));
}
TEST_HARNESS_MAIN
__EOF__
$ ./a.out
[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != (((signed char) (((status) & 0x7f) + 1) >> 1) > 0) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

With this change the output of the same test looks much more
comprehensible:

[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != WIFSIGNALED(status) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

The issue is very similar to the bug fixed in glibc assert(3)
three years ago:
https://sourceware.org/bugzilla/show_bug.cgi?id=18604

Cc: Shuah Khan <shuah@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough

[ Upstream commit ad669505c4e9db9af9faeb5c51aa399326a80d91 ]

A session must only be released after all code that accesses the session
structure has finished. Make sure that this is the case by introducing a
new command counter per session that is only decremented after the
.release_cmd() callback has finished. This patch fixes the following crash:

BUG: KASAN: use-after-free in do_raw_spin_lock+0x1c/0x130
Read of size 4 at addr ffff8801534b16e4 by task rmdir/14805
CPU: 16 PID: 14805 Comm: rmdir Not tainted 4.18.0-rc2-dbg+ #5
Call Trace:
dump_stack+0xa4/0xf5
print_address_description+0x6f/0x270
kasan_report+0x241/0x360
__asan_load4+0x78/0x80
do_raw_spin_lock+0x1c/0x130
_raw_spin_lock_irqsave+0x52/0x60
srpt_set_ch_state+0x27/0x70 [ib_srpt]
srpt_disconnect_ch+0x1b/0xc0 [ib_srpt]
srpt_close_session+0xa8/0x260 [ib_srpt]
target_shutdown_sessions+0x170/0x180 [target_core_mod]
core_tpg_del_initiator_node_acl+0xf3/0x200 [target_core_mod]
target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
config_item_release+0x9c/0x110 [configfs]
config_item_put+0x26/0x30 [configfs]
configfs_rmdir+0x3b8/0x510 [configfs]
vfs_rmdir+0xb3/0x1e0
do_rmdir+0x262/0x2c0
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Disseldorp <ddiss@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: use consistent left-aligned ASCII INQUIRY data

[ Upstream commit 0de263577de5d5e052be5f4f93334e63cc8a7f0b ]

spc5r17.pdf specifies:

  4.3.1 ASCII data field requirements
  ASCII data fields shall contain only ASCII printable characters (i.e.,
  code values 20h to 7Eh) and may be terminated with one or more ASCII null
  (00h) characters.  ASCII data fields described as being left-aligned
  shall have any unused bytes at the end of the field (i.e., highest
  offset) and the unused bytes shall be filled with ASCII space characters
  (20h).

LIO currently space-pads the T10 VENDOR IDENTIFICATION and PRODUCT
IDENTIFICATION fields in the standard INQUIRY data. However, the PRODUCT
REVISION LEVEL field in the standard INQUIRY data as well as the T10 VENDOR
IDENTIFICATION field in the INQUIRY Device Identification VPD Page are
zero-terminated/zero-padded.

Fix this inconsistency by using space-padding for all of the above fields.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: call sk_dst_reset when set SO_DONTROUTE

[ Upstream commit 0fbe82e628c817e292ff588cd5847fc935e025f2 ]

after set SO_DONTROUTE to 1, the IP layer should not route packets if
the dest IP address is not in link scope. But if the socket has cached
the dst_entry, such packets would be routed until the sk_dst_cache
expires. So we should clean the sk_dst_cache when a user set
SO_DONTROUTE option. Below are server/client python scripts which
could reprodue this issue:

server side code:

==========================================================================
import socket
import struct
import time

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind(('0.0.0.0', 9000))
s.listen(1)
sock, addr = s.accept()
sock.setsockopt(socket.SOL_SOCKET, socket.SO_DONTROUTE, struct.pack('i', 1))
while True:
    sock.send(b'foo')
    time.sleep(1)
==========================================================================

client side code:
==========================================================================
import socket
import time

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect(('server_address', 9000))
while True:
    data = s.recv(1024)
    print(data)
==========================================================================

Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: erofs: fix use-after-free of on-stack `z_erofs_vle_unzip_io'

[ Upstream commit 848bd9acdcd00c164b42b14aacec242949ecd471 ]

The root cause is the race as follows:
 Thread #0                         Thread #1

 z_erofs_vle_unzip_kickoff         z_erofs_submit_and_unzip

                                    struct z_erofs_vle_unzip_io io[]
   atomic_add_return()
                                    wait_event()
                                    [end of function]
   wake_up()

Fix it by taking the waitqueue lock between atomic_add_return and
wake_up to close such the race.

kernel message:

Unable to handle kernel paging request at virtual address 97f7052caa1303dc
...
Workqueue: kverityd verity_work
task: ffffffe32bcb8000 task.stack: ffffffe3298a0000
PC is at __wake_up_common+0x48/0xa8
LR is at __wake_up+0x3c/0x58
...
Call trace:
...
[<ffffff94a08ff648>] __wake_up_common+0x48/0xa8
[<ffffff94a08ff8b8>] __wake_up+0x3c/0x58
[<ffffff94a0c11b60>] z_erofs_vle_unzip_kickoff+0x40/0x64
[<ffffff94a0c118e4>] z_erofs_vle_read_endio+0x94/0x134
[<ffffff94a0c83c9c>] bio_endio+0xe4/0xf8
[<ffffff94a1076540>] dec_pending+0x134/0x32c
[<ffffff94a1076f28>] clone_endio+0x90/0xf4
[<ffffff94a0c83c9c>] bio_endio+0xe4/0xf8
[<ffffff94a1095024>] verity_work+0x210/0x368
[<ffffff94a08c4150>] process_one_work+0x188/0x4b4
[<ffffff94a08c45bc>] worker_thread+0x140/0x458
[<ffffff94a08cad48>] kthread+0xec/0x108
[<ffffff94a0883ab4>] ret_from_fork+0x10/0x1c
Code: d1006273 54000260 f9400804 b9400019 (b85fc081)
---[ end trace be9dde154f677cd1 ]---

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: core: Set dma maximum segment size

[ Upstream commit de2563bce7a157f5296bab94f3843d7d64fb14b4 ]

Turning on CONFIG_DMA_API_DEBUG_SG results in the following error:

[  460.308650] ------------[ cut here ]------------
[  460.313490] qcom-venus aa00000.video-codec: DMA-API: mapping sg segment longer than device claims to support [len=4194304] [max=65536]
[  460.326017] WARNING: CPU: 3 PID: 3555 at src/kernel/dma/debug.c:1301 debug_dma_map_sg+0x174/0x254
[  460.338888] Modules linked in: venus_dec venus_enc videobuf2_dma_sg videobuf2_memops hci_uart btqca bluetooth venus_core v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath10k_snoc ath10k_core ath lzo lzo_compress zramjoydev
[  460.375811] CPU: 3 PID: 3555 Comm: V4L2DecoderThre Tainted: G        W         4.19.1 #82
[  460.384223] Hardware name: Google Cheza (rev1) (DT)
[  460.389251] pstate: 60400009 (nZCv daif +PAN -UAO)
[  460.394191] pc : debug_dma_map_sg+0x174/0x254
[  460.398680] lr : debug_dma_map_sg+0x174/0x254
[  460.403162] sp : ffffff80200c37d0
[  460.406583] x29: ffffff80200c3830 x28: 0000000000010000
[  460.412056] x27: 00000000ffffffff x26: ffffffc0f785ea80
[  460.417532] x25: 0000000000000000 x24: ffffffc0f4ea1290
[  460.423001] x23: ffffffc09e700300 x22: ffffffc0f4ea1290
[  460.428470] x21: ffffff8009037000 x20: 0000000000000001
[  460.433936] x19: ffffff80091b0000 x18: 0000000000000000
[  460.439411] x17: 0000000000000000 x16: 000000000000f251
[  460.444885] x15: 0000000000000006 x14: 0720072007200720
[  460.450354] x13: ffffff800af536e0 x12: 0000000000000000
[  460.455822] x11: 0000000000000000 x10: 0000000000000000
[  460.461288] x9 : 537944d9c6c48d00 x8 : 537944d9c6c48d00
[  460.466758] x7 : 0000000000000000 x6 : ffffffc0f8d98f80
[  460.472230] x5 : 0000000000000000 x4 : 0000000000000000
[  460.477703] x3 : 000000000000008a x2 : ffffffc0fdb13948
[  460.483170] x1 : ffffffc0fdb0b0b0 x0 : 000000000000007a
[  460.488640] Call trace:
[  460.491165]  debug_dma_map_sg+0x174/0x254
[  460.495307]  vb2_dma_sg_alloc+0x260/0x2dc [videobuf2_dma_sg]
[  460.501150]  __vb2_queue_alloc+0x164/0x374 [videobuf2_common]
[  460.507076]  vb2_core_reqbufs+0xfc/0x23c [videobuf2_common]
[  460.512815]  vb2_reqbufs+0x44/0x5c [videobuf2_v4l2]
[  460.517853]  v4l2_m2m_reqbufs+0x44/0x78 [v4l2_mem2mem]
[  460.523144]  v4l2_m2m_ioctl_reqbufs+0x1c/0x28 [v4l2_mem2mem]
[  460.528976]  v4l_reqbufs+0x30/0x40
[  460.532480]  __video_do_ioctl+0x36c/0x454
[  460.536610]  video_usercopy+0x25c/0x51c
[  460.540572]  video_ioctl2+0x38/0x48
[  460.544176]  v4l2_ioctl+0x60/0x74
[  460.547602]  do_video_ioctl+0x948/0x3520
[  460.551648]  v4l2_compat_ioctl32+0x60/0x98
[  460.555872]  __arm64_compat_sys_ioctl+0x134/0x20c
[  460.560718]  el0_svc_common+0x9c/0xe4
[  460.564498]  el0_svc_compat_handler+0x2c/0x38
[  460.568982]  el0_svc_compat+0x8/0x18
[  460.572672] ---[ end trace ce209b87b2f3af88 ]---

>From above warning one would deduce that the sg segment will overflow
the device's capacity. In reality, the hardware can accommodate larger
sg segments.
So, initialize the max segment size properly to weed out this warning.

Based on a similar patch sent by Sean Paul for mdss:
https://patchwork.kernel.org/patch/10671457/

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: use dma_ops of parent device for acp_audio_dma

[ Upstream commit 23aa128bb28d9da69bb1bdb2b70e50128857884a ]

AMD platform device acp_audio_dma can only be created by parent PCI
device driver (drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c). Pass struct
device of the parent to snd_pcm_lib_preallocate_pages() so
dma_alloc_coherent() can use correct dma_ops. Otherwise, it will
use default dma_ops which is nommu_dma_ops on x86_64 even when
IOMMU is enabled and set to non passthrough mode.

Though platform device inherits some dma related fields during its
creation in mfd_add_device(), we can't simply pass its struct device
to snd_pcm_lib_preallocate_pages() because dma_ops is not among the
inherited fields. Even it were, drivers/iommu/amd_iommu.c would
ignore it because get_device_id() doesn't handle platform device.

This change shouldn't give us any trouble even struct device of the
parent becomes null or represents some non PCI device in the future,
because get_dma_ops() correctly handles null struct device or uses
the default dma_ops if struct device doesn't have it set.

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: firewire: Fix app_info parameter type in avc_ca{,_app}_info

[ Upstream commit b2e9a4eda11fd2cb1e6714e9ad3f455c402568ff ]

Clang warns:

drivers/media/firewire/firedtv-avc.c:999:45: warning: implicit
conversion from 'int' to 'char' changes value from 159 to -97
[-Wconstant-conversion]
        app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1000:45: warning: implicit
conversion from 'int' to 'char' changes value from 128 to -128
[-Wconstant-conversion]
        app_info[1] = (EN50221_TAG_APP_INFO >>  8) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1040:44: warning: implicit
conversion from 'int' to 'char' changes value from 159 to -97
[-Wconstant-conversion]
        app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1041:44: warning: implicit
conversion from 'int' to 'char' changes value from 128 to -128
[-Wconstant-conversion]
        app_info[1] = (EN50221_TAG_CA_INFO >>  8) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
4 warnings generated.

Change app_info's type to unsigned char to match the type of the
member msg in struct ca_msg, which is the only thing passed into the
app_info parameter in this function.

Link: https://github.com/ClangBuiltLinux/linux/issues/105
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/cpuidle: Fix preempt warning

[ Upstream commit 2b038cbc5fcf12a7ee1cc9bfd5da1e46dacdee87 ]

When booting a pseries kernel with PREEMPT enabled, it dumps the
following warning:

   BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
   caller is pseries_processor_idle_init+0x5c/0x22c
   CPU: 13 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc3-00090-g12201a0128bc-dirty #828
   Call Trace:
   [c000000429437ab0] [c0000000009c8878] dump_stack+0xec/0x164 (unreliable)
   [c000000429437b00] [c0000000005f2f24] check_preemption_disabled+0x154/0x160
   [c000000429437b90] [c000000000cab8e8] pseries_processor_idle_init+0x5c/0x22c
   [c000000429437c10] [c000000000010ed4] do_one_initcall+0x64/0x300
   [c000000429437ce0] [c000000000c54500] kernel_init_freeable+0x3f0/0x500
   [c000000429437db0] [c0000000000112dc] kernel_init+0x2c/0x160
   [c000000429437e20] [c00000000000c1d0] ret_from_kernel_thread+0x5c/0x6c

This happens because the code calls get_lppaca() which calls
get_paca() and it checks if preemption is disabled through
check_preemption_disabled().

Preemption should be disabled because the per CPU variable may make no
sense if there is a preemption (and a CPU switch) after it reads the
per CPU data and when it is used.

In this device driver specifically, it is not a problem, because this
code just needs to have access to one lppaca struct, and it does not
matter if it is the current per CPU lppaca struct or not (i.e. when
there is a preemption and a CPU migration).

That said, the most appropriate fix seems to be related to avoiding
the debug_smp_processor_id() call at get_paca(), instead of calling
preempt_disable() before get_paca().

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xmon: Fix invocation inside lock region

[ Upstream commit 8d4a862276a9c30a269d368d324fb56529e6d5fd ]

Currently xmon needs to get devtree_lock (through rtas_token()) during its
invocation (at crash time). If there is a crash while devtree_lock is being
held, then xmon tries to get the lock but spins forever and never get into
the interactive debugger, as in the following case:

int *ptr = NULL;
raw_spin_lock_irqsave(&devtree_lock, flags);
*ptr = 0xdeadbeef;

This patch avoids calling rtas_token(), thus trying to get the same lock,
at crash time. This new mechanism proposes getting the token at
initialization time (xmon_init()) and just consuming it at crash time.

This would allow xmon to be possible invoked independent of devtree_lock
being held or not.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: uvcvideo: Refactor teardown of uvc on USB disconnect

[ Upstream commit 10e1fdb95809ed21406f53b5b4f064673a1b9ceb ]

Currently, disconnecting a USB webcam while it is in use prints out a
number of warnings, such as:

WARNING: CPU: 2 PID: 3118 at /build/linux-ezBi1T/linux-4.8.0/fs/sysfs/group.c:237 sysfs_remove_group+0x8b/0x90
sysfs group ffffffffa7cd0780 not found for kobject 'event13'

This has been noticed before. [0]

This is because of the order in which things are torn down.

If there are no streams active during a USB disconnect:

 - uvc_disconnect() is invoked via device_del() through the bus
   notifier mechanism.

 - this calls uvc_unregister_video().

 - uvc_unregister_video() unregisters the video device for each
   stream,

 - because there are no streams open, it calls uvc_delete()

 - uvc_delete() calls uvc_status_cleanup(), which cleans up the status
   input device.

 - uvc_delete() calls media_device_unregister(), which cleans up the
   media device

 - uvc_delete(), uvc_unregister_video() and uvc_disconnect() all
   return, and we end up back in device_del().

 - device_del() then cleans up the sysfs folder for the camera with
   dpm_sysfs_remove(). Because uvc_status_cleanup() and
   media_device_unregister() have already been called, this all works
   nicely.

If, on the other hand, there *are* streams active during a USB disconnect:

 - uvc_disconnect() is invoked

 - this calls uvc_unregister_video()

 - uvc_unregister_video() unregisters the video device for each
   stream,

 - uvc_unregister_video() and uvc_disconnect() return, and we end up
   back in device_del().

 - device_del() then cleans up the sysfs folder for the camera with
   dpm_sysfs_remove(). Because the status input device and the media
   device are children of the USB device, this also deletes their
   sysfs folders.

 - Sometime later, the final stream is closed, invoking uvc_release().

 - uvc_release() calls uvc_delete()

 - uvc_delete() calls uvc_status_cleanup(), which cleans up the status
   input device. Because the sysfs directory has already been removed,
   this causes a WARNing.

 - uvc_delete() calls media_device_unregister(), which cleans up the
   media device. Because the sysfs directory has already been removed,
   this causes another WARNing.

To fix this, we need to make sure the devices are always unregistered
before the end of uvc_disconnect(). To this, move the unregistration
into the disconnect path:

 - split uvc_status_cleanup() into two parts, one on disconnect that
   unregisters and one on delete that frees.

 - move v4l2_device_unregister() and media_device_unregister() into
   the disconnect path.

[0]: https://lkml.org/lkml/2016/12/8/657

[Renamed uvc_input_cleanup() to uvc_input_unregister()]

Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore/ram: Do not treat empty buffers as valid

[ Upstream commit 30696378f68a9e3dad6bfe55938b112e72af00c2 ]

The ramoops backend currently calls persistent_ram_save_old() even
if a buffer is empty. While this appears to work, it is does not seem
like the right thing to do and could lead to future bugs so lets avoid
that. It also prevents misleading prints in the logs which claim the
buffer is valid.

I got something like:

found existing buffer, size 0, start 0

When I was expecting:

no valid data in buffer (sig = ...)

This bails out early (and reports with pr_debug()), since it's an
acceptable state.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: make mux parent strings const

[ Upstream commit 9e5ef7a57ca75a1b9411c46caeeb6881124284a3 ]

As the commit 2893c379461a ("clk: make strings in parent name arrays
const"), let's make the parent strings const, otherwise we may meet
the following warning when compiling:

drivers/clk/imx/clk-imx7ulp.c: In function 'imx7ulp_clocks_init':
drivers/clk/imx/clk-imx7ulp.c:73:35: warning: passing argument 5 of
'imx_clk_mux_flags' discards 'const' qualifier from pointer target type

  clks[IMX7ULP_CLK_APLL_PRE_SEL] = imx_clk_mux_flags("apll_pre_sel", base + 0x508, 0,
1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
                                   ^
In file included from drivers/clk/imx/clk-imx7ulp.c:23:0:
drivers/clk/imx/clk.h:200:27: note: expected 'const char **' but argument is
 of type 'const char * const*'
...

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jffs2: Fix use of uninitialized delayed_work, lockdep breakage

[ Upstream commit a788c5272769ddbcdbab297cf386413eeac04463 ]

jffs2_sync_fs makes the assumption that if CONFIG_JFFS2_FS_WRITEBUFFER
is defined then a write buffer is available and has been initialized.
However, this does is not the case when the mtd device has no
out-of-band buffer:

int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
{
        if (!c->mtd->oobsize)
                return 0;
...

The resulting call to cancel_delayed_work_sync passing a uninitialized
(but zeroed) delayed_work struct forces lockdep to become disabled.

[   90.050639] overlayfs: upper fs does not support tmpfile.
[   90.652264] INFO: trying to register non-static key.
[   90.662171] the code is fine but needs lockdep annotation.
[   90.673090] turning off the locking correctness validator.
[   90.684021] CPU: 0 PID: 1762 Comm: mount_root Not tainted 4.14.63 #0
[   90.696672] Stack : 00000000 00000000 80d8f6a2 00000038 805f0000 80444600 8fe364f4 805dfbe7
[   90.713349]         80563a30 000006e2 8068370c 00000001 00000000 00000001 8e2fdc48 ffffffff
[   90.730020]         00000000 00000000 80d90000 00000000 00000106 00000000 6465746e 312e3420
[   90.746690]         6b636f6c 03bf0000 f8000000 20676e69 00000000 80000000 00000000 8e2c2a90
[   90.763362]         80d90000 00000001 00000000 8e2c2a90 00000003 80260dc0 08052098 80680000
[   90.780033]         ...
[   90.784902] Call Trace:
[   90.789793] [<8000f0d8>] show_stack+0xb8/0x148
[   90.798659] [<8005a000>] register_lock_class+0x270/0x55c
[   90.809247] [<8005cb64>] __lock_acquire+0x13c/0xf7c
[   90.818964] [<8005e314>] lock_acquire+0x194/0x1dc
[   90.828345] [<8003f27c>] flush_work+0x200/0x24c
[   90.837374] [<80041dfc>] __cancel_work_timer+0x158/0x210
[   90.847958] [<801a8770>] jffs2_sync_fs+0x20/0x54
[   90.857173] [<80125cf4>] iterate_supers+0xf4/0x120
[   90.866729] [<80158fc4>] sys_sync+0x44/0x9c
[   90.875067] [<80014424>] syscall_common+0x34/0x58

Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/libstub: Disable some warnings for x86{,_64}

[ Upstream commit 3db5e0ba8b8f4aee631d7ee04b7a11c56cfdc213 ]

When building the kernel with Clang, some disabled warnings appear
because this Makefile overrides KBUILD_CFLAGS for x86{,_64}. Add them to
this list so that the build is clean again.

-Wpointer-sign was disabled for the whole kernel before the beginning of Git history.

-Waddress-of-packed-member was disabled for the whole kernel and for
the early boot code in these commits:

  bfb38988c51e ("kbuild: clang: Disable 'address-of-packed-member' warning")
  20c6c1890455 ("x86/boot: Disable the address-of-packed-member compiler warning").

-Wgnu was disabled for the whole kernel and for the early boot code in
these commits:

  61163efae020 ("kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang")
  6c3b56b19730 ("x86/boot: Disable Clang warnings about GNU extensions").

 [ mingo: Made the changelog more readable. ]

Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Bhupesh Sharma <bhsharma@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181129171230.18699-8-ard.biesheuvel@linaro.org
Link: https://github.com/ClangBuiltLinux/linux/issues/112
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxe: IB_WR_REG_MR does not capture MR's iova field

[ Upstream commit b024dd0eba6e6d568f69d63c5e3153aba94c23e3 ]

FRWR memory registration is done with a series of calls and WRs.
1. ULP invokes ib_dma_map_sg()
2. ULP invokes ib_map_mr_sg()
3. ULP posts an IB_WR_REG_MR on the Send queue

Step 2 generates an iova. It is permissible for ULPs to change this
iova (with certain restrictions) between steps 2 and 3.

rxe_map_mr_sg captures the MR's iova but later when rxe processes the
REG_MR WR, it ignores the MR's iova field. If a ULP alters the MR's iova
after step 2 but before step 3, rxe never captures that change.

When the remote sends an RDMA Read targeting that MR, rxe looks up the
R_key, but the altered iova does not match the iova stored in the MR,
causing the RDMA Read request to fail.

Reported-by: Anna Schumaker <schumaker.anna@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Reorder uvd ring init before uvd resume

[ Upstream commit 3b34c14fd50c302db091f020f26dd00ede902c80 ]

As amd_uvd_resume() accesses the uvd ring, it must be initialised first
or else we trigger errors like:

[    5.595963] [drm] Found UVD firmware Version: 1.87 Family ID: 17
[    5.595969] [drm] PSP loading UVD firmware
[    5.596266] ------------[ cut here ]------------
[    5.596268] ODEBUG: assert_init not available (active state 0) object type: timer_list hint:           (null)
[    5.596285] WARNING: CPU: 0 PID: 507 at lib/debugobjects.c:329 debug_print_object+0x6a/0x80
[    5.596286] Modules linked in: amdgpu(+) hid_logitech_hidpp(+) chash gpu_sched amd_iommu_v2 ttm drm_kms_helper crc32c_intel drm hid_sony ff_memless igb hid_logitech_dj nvme dca i2c_algo_bit nvme_core wmi pinctrl_amd uas usb_storage
[    5.596299] CPU: 0 PID: 507 Comm: systemd-udevd Tainted: G        W         4.20.0-0.rc1.git4.1.fc30.x86_64 #1
[    5.596301] Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 0901 07/23/2018
[    5.596303] RIP: 0010:debug_print_object+0x6a/0x80
[    5.596305] Code: 8b 43 10 83 c2 01 8b 4b 14 4c 89 e6 89 15 e6 82 b0 02 4c 8b 45 00 48 c7 c7 60 fd 34 a6 48 8b 14 c5 a0 da 08 a6 e8 6a 6a b8 ff <0f> 0b 5b 83 05 d0 45 3e 01 01 5d 41 5c c3 83 05 c5 45 3e 01 01 c3
[    5.596306] RSP: 0018:ffffa02ac863f8c0 EFLAGS: 00010282
[    5.596307] RAX: 0000000000000000 RBX: ffffa02ac863f8e0 RCX: 0000000000000006
[    5.596308] RDX: 0000000000000007 RSI: ffff9160e9a7bfe8 RDI: ffff9160f91d6c60
[    5.596310] RBP: ffffffffa6742740 R08: 0000000000000002 R09: 0000000000000000
[    5.596311] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa634ff69
[    5.596312] R13: 00000000000b79d0 R14: ffffffffa80f76d8 R15: 0000000000266000
[    5.596313] FS:  00007f762abf7940(0000) GS:ffff9160f9000000(0000) knlGS:0000000000000000
[    5.596314] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.596315] CR2: 000055fdc593f000 CR3: 00000007e999c000 CR4: 00000000003406f0
[    5.596317] Call Trace:
[    5.596321]  debug_object_assert_init+0x14a/0x180
[    5.596327]  del_timer+0x2e/0x90
[    5.596383]  amdgpu_fence_process+0x47/0x100 [amdgpu]
[    5.596430]  amdgpu_uvd_resume+0xf6/0x120 [amdgpu]
[    5.596475]  uvd_v7_0_sw_init+0xe0/0x280 [amdgpu]
[    5.596523]  amdgpu_device_init.cold.30+0xf97/0x14b6 [amdgpu]
[    5.596563]  ? amdgpu_driver_load_kms+0x53/0x330 [amdgpu]
[    5.596604]  amdgpu_driver_load_kms+0x86/0x330 [amdgpu]
[    5.596614]  drm_dev_register+0x115/0x150 [drm]
[    5.596654]  amdgpu_pci_probe+0xbd/0x120 [amdgpu]
[    5.596658]  local_pci_probe+0x41/0x90
[    5.596661]  pci_device_probe+0x188/0x1a0
[    5.596666]  really_probe+0xf8/0x3b0
[    5.596669]  driver_probe_device+0xb3/0xf0
[    5.596672]  __driver_attach+0xe1/0x110
[    5.596674]  ? driver_probe_device+0xf0/0xf0
[    5.596676]  bus_for_each_dev+0x79/0xc0
[    5.596679]  bus_add_driver+0x155/0x230
[    5.596681]  ? 0xffffffffc07d9000
[    5.596683]  driver_register+0x6b/0xb0
[    5.596685]  ? 0xffffffffc07d9000
[    5.596688]  do_one_initcall+0x5d/0x2be
[    5.596691]  ? rcu_read_lock_sched_held+0x79/0x80
[    5.596693]  ? kmem_cache_alloc_trace+0x264/0x290
[    5.596695]  ? do_init_module+0x22/0x210
[    5.596698]  do_init_module+0x5a/0x210
[    5.596701]  load_module+0x2137/0x2430
[    5.596703]  ? lockdep_hardirqs_on+0xed/0x180
[    5.596714]  ? __do_sys_init_module+0x150/0x1a0
[    5.596715]  __do_sys_init_module+0x150/0x1a0
[    5.596722]  do_syscall_64+0x60/0x1f0
[    5.596725]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[    5.596726] RIP: 0033:0x7f762b877dee
[    5.596728] Code: 48 8b 0d 9d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6a 20 0c 00 f7 d8 64 89 01 48
[    5.596729] RSP: 002b:00007ffc777b8558 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[    5.596730] RAX: ffffffffffffffda RBX: 000055fdc48da320 RCX: 00007f762b877dee
[    5.596731] RDX: 00007f762b9f284d RSI: 00000000006c5fc6 RDI: 000055fdc527a060
[    5.596732] RBP: 00007f762b9f284d R08: 0000000000000003 R09: 0000000000000002
[    5.596733] R10: 000055fdc48ad010 R11: 0000000000000246 R12: 000055fdc527a060
[    5.596734] R13: 000055fdc48dca20 R14: 0000000000020000 R15: 0000000000000000
[    5.596740] irq event stamp: 134618
[    5.596743] hardirqs last  enabled at (134617): [<ffffffffa513d52e>] console_unlock+0x45e/0x610
[    5.596744] hardirqs last disabled at (134618): [<ffffffffa50037e8>] trace_hardirqs_off_thunk+0x1a/0x1c
[    5.596746] softirqs last  enabled at (133146): [<ffffffffa5e00365>] __do_softirq+0x365/0x47c
[    5.596748] softirqs last disabled at (133139): [<ffffffffa50c64f9>] irq_exit+0x119/0x120
[    5.596749] ---[ end trace eaee508abfebccdc ]---

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108709
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedi: Check for session online before getting iSCSI TLV data.

[ Upstream commit d5632b11f0a17efa6356311e535ae135d178438d ]

The kernel panic was observed after switch side perturbation,

BUG: unable to handle kernel NULL pointer dereference at (null)
     IP: [<ffffffff8132b5a0>] strcmp+0x20/0x40
     PGD 0 Oops: 0000 [#1] SMP
CPU: 8 PID: 647 Comm: kworker/8:1 Tainted: G        W  OE  ------------   3.10.0-693.el7.x86_64 #1
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/20/2018
Workqueue: slowpath-13:00. qed_slowpath_task [qed]
task: ffff880429eb8fd0 ti: ffff880429190000 task.ti: ffff880429190000
RIP: 0010:[<ffffffff8132b5a0>]  [<ffffffff8132b5a0>] strcmp+0x20/0x40
RSP: 0018:ffff880429193c68  EFLAGS: 00010202
RAX: 000000000000000a RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff88042bda7a41
RBP: ffff880429193c68 R08: 000000000000ffff R09: 000000000000ffff
R10: 0000000000000007 R11: ffff88042b3af338 R12: ffff880420b007a0
R13: ffff88081aa56af8 R14: 0000000000000001 R15: ffff88081aa50410
FS:  0000000000000000(0000) GS:ffff88042fe00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000019f2000 CR4: 00000000003407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffff880429193d20 ffffffffc02a0c90 ffffc90004b32000 ffff8803fd3ec600
ffff88042bda7800 ffff88042bda7a00 ffff88042bda7840 ffff88042bda7a40
0000000129193d10 2e3836312e323931 ff000a342e363232 ffffffffc01ad99d
Call Trace:
[<ffffffffc02a0c90>] qedi_get_protocol_tlv_data+0x270/0x470 [qedi]
[<ffffffffc01ad99d>] ? qed_mfw_process_tlv_req+0x24d/0xbf0 [qed]
[<ffffffffc01653ae>] qed_mfw_fill_tlv_data+0x5e/0xd0 [qed]
[<ffffffffc01ad9b9>] qed_mfw_process_tlv_req+0x269/0xbf0 [qed]

Fix kernel NULL pointer deref by checking for session is online before
getting iSCSI TLV data.

Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: pcm3168a: Don't disable pcm3168a when CONFIG_PM defined

[ Upstream commit 489db5d941500249583ec6b49fa70e006bd8f632 ]

pcm3168 codec support runtime_[resume|suspend], whenever it
is not active, it enters suspend mode, and it's clock and regulators
will be disabled. so there is no need to disable them again in
remove callback.  Otherwise we got following kernel warnings,
when unload pcm3168a driver

[  222.257514] unbalanced disables for amp-en-regulator
[  222.262526] ------------[ cut here ]------------
[  222.267158] WARNING: CPU: 0 PID: 2423 at drivers/regulator/core.c:2264 _regulator_disable+0x28/0x108
[  222.276291] Modules linked in:
[  222.279343]  snd_soc_pcm3168a_i2c(-)
[  222.282916]  snd_aloop
[  222.285272]  arc4
[  222.287194]  wl18xx
[  222.289289]  wlcore
[  222.291385]  mac80211
[  222.293654]  cfg80211
[  222.295923]  aes_ce_blk
[  222.298366]  crypto_simd
[  222.300896]  cryptd
[  222.302992]  aes_ce_cipher
[  222.305696]  crc32_ce
[  222.307965]  ghash_ce
[  222.310234]  aes_arm64
[  222.312590]  gf128mul
[  222.314860]  snd_soc_rcar
[  222.317476]  sha2_ce
[  222.319658]  xhci_plat_hcd
[  222.322362]  sha256_arm64
[  222.324978]  xhci_hcd
[  222.327247]  sha1_ce
[  222.329430]  renesas_usbhs
[  222.332133]  evdev
[  222.334142]  sha1_generic
[  222.336758]  rcar_gen3_thermal
[  222.339810]  cpufreq_dt
[  222.342253]  ravb_streaming(C)
[  222.345304]  wlcore_sdio
[  222.347834]  thermal_sys
[  222.350363]  udc_core
[  222.352632]  mch_core(C)
[  222.355161]  usb_dmac
[  222.357430]  snd_soc_pcm3168a
[  222.360394]  snd_soc_ak4613
[  222.363184]  gpio_keys
[  222.365540]  virt_dma
[  222.367809]  nfsd
[  222.369730]  ipv6
[  222.371652]  autofs4
[  222.373834]  [last unloaded: snd_soc_pcm3168a_i2c]
[  222.378629] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  222.388196] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  222.396199] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  222.402117] PC is at _regulator_disable+0x28/0x108
[  222.406906] LR is at _regulator_disable+0x28/0x108
[  222.411695] pc : [<ffff0000083bd89c>] lr : [<ffff0000083bd89c>] pstate: 00000145
[  222.419089] sp : ffff00000a0a3c80
[  222.422401] x29: ffff00000a0a3c80
[  222.425799] x28: ffff8006fa8c6200
[  222.429199] x27: ffff0000086f1000
[  222.432597] x26: 000000000000006a
[  222.435997] x25: 0000000000000124
[  222.439395] x24: 0000000000000018
[  222.442795] x23: 0000000000000006
[  222.446193] x22: ffff8006f925d490
[  222.449592] x21: ffff8006f9ac2068
[  222.452991] x20: ffff8006f9ac2000
[  222.456390] x19: 0000000000000005
[  222.459787] x18: 000000000000000a
[  222.463186] x17: 0000000000000000
[  222.466584] x16: 0000000000000000
[  222.469984] x15: 000000000d3f616a
[  222.473382] x14: 0720072007200720
[  222.476781] x13: 0720072007200720
[  222.480179] x12: 0720072007200720
[  222.483578] x11: 0720072007200720
[  222.486975] x10: 0720072007200720
[  222.490375] x9 : 0720072007200720
[  222.493773] x8 : 07200772076f0774
[  222.497172] x7 : 0000000000000000
[  222.500570] x6 : 0000000000000007
[  222.503969] x5 : 0000000000000000
[  222.507367] x4 : 0000000000000000
[  222.510766] x3 : 0000000000000000
[  222.514164] x2 : c790b852091e2600
[  222.517563] x1 : 0000000000000000
[  222.520961] x0 : 0000000000000028
[  222.524361] Call trace:
[  222.526805] Exception stack(0xffff00000a0a3b40 to 0xffff00000a0a3c80)
[  222.533245] 3b40: 0000000000000028 0000000000000000 c790b852091e2600 0000000000000000
[  222.541075] 3b60: 0000000000000000 0000000000000000 0000000000000007 0000000000000000
[  222.548905] 3b80: 07200772076f0774 0720072007200720 0720072007200720 0720072007200720
[  222.556735] 3ba0: 0720072007200720 0720072007200720 0720072007200720 000000000d3f616a
[  222.564564] 3bc0: 0000000000000000 0000000000000000 000000000000000a 0000000000000005
[  222.572394] 3be0: ffff8006f9ac2000 ffff8006f9ac2068 ffff8006f925d490 0000000000000006
[  222.580224] 3c00: 0000000000000018 0000000000000124 000000000000006a ffff0000086f1000
[  222.588053] 3c20: ffff8006fa8c6200 ffff00000a0a3c80 ffff0000083bd89c ffff00000a0a3c80
[  222.595883] 3c40: ffff0000083bd89c 0000000000000145 0000000000000000 0000000000000000
[  222.603713] 3c60: 0000ffffffffffff ffff00000a0a3c30 ffff00000a0a3c80 ffff0000083bd89c
[  222.611543] [<ffff0000083bd89c>] _regulator_disable+0x28/0x108
[  222.617375] [<ffff0000083bd9c4>] regulator_disable+0x48/0x68
[  222.623033] [<ffff0000083be8e4>] regulator_bulk_disable+0x58/0xc0
[  222.629134] [<ffff0000007d831c>] pcm3168a_remove+0x30/0x50 [snd_soc_pcm3168a]
[  222.636270] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  222.644106] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  222.649766] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  222.656640] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  222.661951] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  222.667609] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  222.673268] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  222.678666] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  222.687019] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  222.692850] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  222.699289] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  222.707119] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  222.714948] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  222.722778] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  222.730607] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  222.738436] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  222.746266] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  222.754096] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  222.761926] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  222.769755] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  222.777589] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  222.782899] ---[ end trace eaf8939a3698b1a8 ]---
[  222.787609] Failed to disable VCCDA2: -5
[  222.791649] ------------[ cut here ]------------
[  222.796283] WARNING: CPU: 0 PID: 2423 at drivers/clk/clk.c:595 clk_core_disable+0xc/0x1d8
[  222.804460] Modules linked in:
[  222.807511]  snd_soc_pcm3168a_i2c(-)
[  222.811083]  snd_aloop
[  222.813439]  arc4
[  222.815360]  wl18xx
[  222.817456]  wlcore
[  222.819551]  mac80211
[  222.821820]  cfg80211
[  222.824088]  aes_ce_blk
[  222.826531]  crypto_simd
[  222.829060]  cryptd
[  222.831155]  aes_ce_cipher
[  222.833859]  crc32_ce
[  222.836127]  ghash_ce
[  222.838396]  aes_arm64
[  222.840752]  gf128mul
[  222.843020]  snd_soc_rcar
[  222.845637]  sha2_ce
[  222.847818]  xhci_plat_hcd
[  222.850522]  sha256_arm64
[  222.853138]  xhci_hcd
[  222.855407]  sha1_ce
[  222.857589]  renesas_usbhs
[  222.860292]  evdev
[  222.862300]  sha1_generic
[  222.864917]  rcar_gen3_thermal
[  222.867968]  cpufreq_dt
[  222.870410]  ravb_streaming(C)
[  222.873461]  wlcore_sdio
[  222.875991]  thermal_sys
[  222.878520]  udc_core
[  222.880789]  mch_core(C)
[  222.883318]  usb_dmac
[  222.885587]  snd_soc_pcm3168a
[  222.888551]  snd_soc_ak4613
[  222.891341]  gpio_keys
[  222.893696]  virt_dma
[  222.895965]  nfsd
[  222.897886]  ipv6
[  222.899808]  autofs4
[  222.901990]  [last unloaded: snd_soc_pcm3168a_i2c]
[  222.906783] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  222.916349] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  222.924351] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  222.930270] PC is at clk_core_disable+0xc/0x1d8
[  222.934799] LR is at clk_core_disable_lock+0x20/0x34
[  222.939761] pc : [<ffff0000083ab9b8>] lr : [<ffff0000083acd28>] pstate: 800001c5
[  222.947154] sp : ffff00000a0a3cf0
[  222.950466] x29: ffff00000a0a3cf0
[  222.953864] x28: ffff8006fa8c6200
[  222.957263] x27: ffff0000086f1000
[  222.960661] x26: 000000000000006a
[  222.964061] x25: 0000000000000124
[  222.967458] x24: 0000000000000015
[  222.970858] x23: ffff8006f9ffa8d0
[  222.974256] x22: ffff8006faf16480
[  222.977655] x21: ffff0000007e7040
[  222.981053] x20: ffff8006faadd100
[  222.984452] x19: 0000000000000140
[  222.987850] x18: 000000000000000a
[  222.991249] x17: 0000000000000000
[  222.994647] x16: 0000000000000000
[  222.998046] x15: 000000000d477819
[  223.001444] x14: 0720072007200720
[  223.004843] x13: 0720072007200720
[  223.008242] x12: 0720072007200720
[  223.011641] x11: 0720072007200720
[  223.015039] x10: 0720072007200720
[  223.018438] x9 : 0720072007200720
[  223.021837] x8 : 0720072007200720
[  223.025236] x7 : 0000000000000000
[  223.028634] x6 : 0000000000000007
[  223.032034] x5 : 0000000000000000
[  223.035432] x4 : 0000000000000000
[  223.038831] x3 : 0000000000000000
[  223.042229] x2 : 0000000004720471
[  223.045628] x1 : 0000000000000000
[  223.049026] x0 : ffff8006faadd100
[  223.052426] Call trace:
[  223.054870] Exception stack(0xffff00000a0a3bb0 to 0xffff00000a0a3cf0)
[  223.061309] 3ba0:                                   ffff8006faadd100 0000000000000000
[  223.069139] 3bc0: 0000000004720471 0000000000000000 0000000000000000 0000000000000000
[  223.076969] 3be0: 0000000000000007 0000000000000000 0720072007200720 0720072007200720
[  223.084798] 3c00: 0720072007200720 0720072007200720 0720072007200720 0720072007200720
[  223.092628] 3c20: 0720072007200720 000000000d477819 0000000000000000 0000000000000000
[  223.100458] 3c40: 000000000000000a 0000000000000140 ffff8006faadd100 ffff0000007e7040
[  223.108287] 3c60: ffff8006faf16480 ffff8006f9ffa8d0 0000000000000015 0000000000000124
[  223.116117] 3c80: 000000000000006a ffff0000086f1000 ffff8006fa8c6200 ffff00000a0a3cf0
[  223.123947] 3ca0: ffff0000083acd28 ffff00000a0a3cf0 ffff0000083ab9b8 00000000800001c5
[  223.131777] 3cc0: ffff00000a0a3cf0 ffff0000083acd1c 0000ffffffffffff ffff8006faadd100
[  223.139606] 3ce0: ffff00000a0a3cf0 ffff0000083ab9b8
[  223.144483] [<ffff0000083ab9b8>] clk_core_disable+0xc/0x1d8
[  223.150054] [<ffff0000083acd58>] clk_disable+0x1c/0x28
[  223.155198] [<ffff0000007d8328>] pcm3168a_remove+0x3c/0x50 [snd_soc_pcm3168a]
[  223.162334] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  223.170167] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  223.175826] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  223.182700] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  223.188012] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  223.193669] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  223.199329] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  223.204726] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  223.213079] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  223.218909] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  223.225349] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  223.233179] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  223.241008] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  223.248838] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  223.256668] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  223.264497] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  223.272327] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  223.280157] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  223.287986] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  223.295816] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  223.303648] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  223.308958] ---[ end trace eaf8939a3698b1a9 ]---
[  223.313752] ------------[ cut here ]------------
[  223.318383] WARNING: CPU: 0 PID: 2423 at drivers/clk/clk.c:477 clk_core_unprepare+0xc/0x1ac
[  223.326733] Modules linked in:
[  223.329784]  snd_soc_pcm3168a_i2c(-)
[  223.333356]  snd_aloop
[  223.335712]  arc4
[  223.337633]  wl18xx
[  223.339728]  wlcore
[  223.341823]  mac80211
[  223.344092]  cfg80211
[  223.346360]  aes_ce_blk
[  223.348803]  crypto_simd
[  223.351332]  cryptd
[  223.353428]  aes_ce_cipher
[  223.356131]  crc32_ce
[  223.358400]  ghash_ce
[  223.360668]  aes_arm64
[  223.363024]  gf128mul
[  223.365293]  snd_soc_rcar
[  223.367909]  sha2_ce
[  223.370091]  xhci_plat_hcd
[  223.372794]  sha256_arm64
[  223.375410]  xhci_hcd
[  223.377679]  sha1_ce
[  223.379861]  renesas_usbhs
[  223.382564]  evdev
[  223.384572]  sha1_generic
[  223.387188]  rcar_gen3_thermal
[  223.390239]  cpufreq_dt
[  223.392682]  ravb_streaming(C)
[  223.395732]  wlcore_sdio
[  223.398261]  thermal_sys
[  223.400790]  udc_core
[  223.403059]  mch_core(C)
[  223.405588]  usb_dmac
[  223.407856]  snd_soc_pcm3168a
[  223.410820]  snd_soc_ak4613
[  223.413609]  gpio_keys
[  223.415965]  virt_dma
[  223.418234]  nfsd
[  223.420155]  ipv6
[  223.422076]  autofs4
[  223.424258]  [last unloaded: snd_soc_pcm3168a_i2c]
[  223.429050] CPU: 0 PID: 2423 Comm: rmmod Tainted: G        WC      4.14.63-04798-gd456126e4a42-dirty #457
[  223.438616] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[  223.446618] task: ffff8006fa8c6200 task.stack: ffff00000a0a0000
[  223.452536] PC is at clk_core_unprepare+0xc/0x1ac
[  223.457239] LR is at clk_unprepare+0x28/0x3c
[  223.461506] pc : [<ffff0000083ab5a4>] lr : [<ffff0000083ace4c>] pstate: 60000145
[  223.468900] sp : ffff00000a0a3d00
[  223.472211] x29: ffff00000a0a3d00
[  223.475609] x28: ffff8006fa8c6200
[  223.479009] x27: ffff0000086f1000
[  223.482407] x26: 000000000000006a
[  223.485807] x25: 0000000000000124
[  223.489205] x24: 0000000000000015
[  223.492604] x23: ffff8006f9ffa8d0
[  223.496003] x22: ffff8006faf16480
[  223.499402] x21: ffff0000007e7040
[  223.502800] x20: ffff8006faf16420
[  223.506199] x19: ffff8006faadd100
[  223.509597] x18: 000000000000000a
[  223.512997] x17: 0000000000000000
[  223.516395] x16: 0000000000000000
[  223.519794] x15: 0000000000000000
[  223.523192] x14: 00000033fe89076c
[  223.526591] x13: 0000000000000400
[  223.529989] x12: 0000000000000400
[  223.533388] x11: 0000000000000000
[  223.536786] x10: 00000000000009e0
[  223.540185] x9 : ffff00000a0a3be0
[  223.543583] x8 : ffff8006fa8c6c40
[  223.546982] x7 : ffff8006fa8c6400
[  223.550380] x6 : 0000000000000001
[  223.553780] x5 : 0000000000000000
[  223.557178] x4 : ffff8006fa8c6200
[  223.560577] x3 : 0000000000000000
[  223.563975] x2 : ffff8006fa8c6200
[  223.567374] x1 : 0000000000000000
[  223.570772] x0 : ffff8006faadd100
[  223.574170] Call trace:
[  223.576615] Exception stack(0xffff00000a0a3bc0 to 0xffff00000a0a3d00)
[  223.583054] 3bc0: ffff8006faadd100 0000000000000000 ffff8006fa8c6200 0000000000000000
[  223.590884] 3be0: ffff8006fa8c6200 0000000000000000 0000000000000001 ffff8006fa8c6400
[  223.598714] 3c00: ffff8006fa8c6c40 ffff00000a0a3be0 00000000000009e0 0000000000000000
[  223.606544] 3c20: 0000000000000400 0000000000000400 00000033fe89076c 0000000000000000
[  223.614374] 3c40: 0000000000000000 0000000000000000 000000000000000a ffff8006faadd100
[  223.622204] 3c60: ffff8006faf16420 ffff0000007e7040 ffff8006faf16480 ffff8006f9ffa8d0
[  223.630033] 3c80: 0000000000000015 0000000000000124 000000000000006a ffff0000086f1000
[  223.637863] 3ca0: ffff8006fa8c6200 ffff00000a0a3d00 ffff0000083ace4c ffff00000a0a3d00
[  223.645693] 3cc0: ffff0000083ab5a4 0000000060000145 0000000000000140 ffff8006faadd100
[  223.653523] 3ce0: 0000ffffffffffff ffff0000083ace44 ffff00000a0a3d00 ffff0000083ab5a4
[  223.661353] [<ffff0000083ab5a4>] clk_core_unprepare+0xc/0x1ac
[  223.667103] [<ffff0000007d8330>] pcm3168a_remove+0x44/0x50 [snd_soc_pcm3168a]
[  223.674239] [<ffff0000007e5010>] pcm3168a_i2c_remove+0x10/0x1c [snd_soc_pcm3168a_i2c]
[  223.682070] [<ffff0000084b9d9c>] i2c_device_remove+0x38/0x70
[  223.687731] [<ffff00000843cd5c>] device_release_driver_internal+0xd0/0x1c0
[  223.694604] [<ffff00000843ced8>] driver_detach+0x70/0x7c
[  223.699915] [<ffff00000843bf68>] bus_remove_driver+0x74/0xa0
[  223.705572] [<ffff00000843d7e4>] driver_unregister+0x48/0x4c
[  223.711230] [<ffff0000084ba8dc>] i2c_del_driver+0x24/0x30
[  223.716628] [<ffff0000007e5078>] pcm3168a_i2c_driver_exit+0x10/0xf98 [snd_soc_pcm3168a_i2c]
[  223.724980] [<ffff00000811bd28>] SyS_delete_module+0x198/0x1d4
[  223.730811] Exception stack(0xffff00000a0a3ec0 to 0xffff00000a0a4000)
[  223.737250] 3ec0: 0000aaaafeb4b268 0000000000000800 14453f6470497100 0000fffffaa520d8
[  223.745079] 3ee0: 0000fffffaa520d9 000000000000000a 1999999999999999 0000000000000000
[  223.752909] 3f00: 000000000000006a 0000ffffa8f7d1d8 000000000000000a 0000000000000005
[  223.760739] 3f20: 0000000000000000 0000000000000000 000000000000002d 0000000000000000
[  223.768568] 3f40: 0000aaaae19b9f68 0000ffffa8f411f0 0000000000000000 0000aaaae19b9000
[  223.776398] 3f60: 0000fffffaa533b8 0000fffffaa531f0 0000000000000000 0000000000000001
[  223.784227] 3f80: 0000fffffaa53ec6 0000000000000000 0000aaaafeb4b200 0000aaaafeb4a010
[  223.792057] 3fa0: 0000000000000000 0000fffffaa53130 0000aaaae199f36c 0000fffffaa53130
[  223.799886] 3fc0: 0000ffffa8f411f8 0000000000000000 0000aaaafeb4b268 000000000000006a
[  223.807715] 3fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  223.815546] [<ffff0000080832c0>] el0_svc_naked+0x34/0x38
[  223.820855] ---[ end trace eaf8939a3698b1aa ]---

Fix this issue by only disable clock and regulators in remove callback
when CONFIG_PM isn't defined

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: always allow mounting submounts

[ Upstream commit 2cbdcb882f97a45f7475c67ac6257bbc16277dfe ]

If a superblock has the MS_SUBMOUNT flag set, we should always allow
mounting it. These mounts are done automatically by the kernel either as
part of mounting some parent mount (e.g. debugfs always mounts tracefs
under "tracing" for compatibility) or they are mounted automatically as
needed on subdirectory accesses (e.g. NFS crossmnt mounts). Since such
automounts are either an implicit consequence of the parent mount (which
is already checked) or they can happen during regular accesses (where it
doesn't make sense to check against the current task's context), the
mount permission check should be skipped for them.

Without this patch, attempts to access contents of an automounted
directory can cause unexpected SELinux denials.

In the current kernel tree, the MS_SUBMOUNT flag is set only via
vfs_submount(), which is called only from the following places:
 - AFS, when automounting special "symlinks" referencing other cells
 - CIFS, when automounting "referrals"
 - NFS, when automounting subtrees
 - debugfs, when automounting tracefs

In all cases the submounts are meant to be transparent to the user and
it makes sense that if mounting the master is allowed, then so should be
the automounts. Note that CAP_SYS_ADMIN capability checking is already
skipped for (SB_KERNMOUNT|SB_SUBMOUNT) in:
 - sget_userns() in fs/super.c:
if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) &&
    !(type->fs_flags & FS_USERNS_MOUNT) &&
    !capable(CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
 - sget() in fs/super.c:
        /* Ensure the requestor has permissions over the target filesystem */
        if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) && !ns_capable(user_ns, CAP_SYS_ADMIN))
                return ERR_PTR(-EPERM);

Verified internally on patched RHEL 7.6 with a reproducer using
NFS+httpd and selinux-tesuite.

Fixes: 93faccbbfa95 ("fs: Better permission checking for submounts")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fpga: altera-cvp: fix probing for multiple FPGAs on the bus

[ Upstream commit 30522a951f9d02f261d0697c35cb42205b1fae17 ]

Currently registering CvP managers works only for first probed CvP
device, for all other devices it is refused due to duplicated chkcfg
sysfs entry:

fpga_manager fpga3: Altera CvP FPGA Manager @0000:0c:00.0 registered
sysfs: cannot create duplicate filename '/bus/pci/drivers/altera-cvp/chkcfg'
CPU: 0 PID: 3808 Comm: bash Tainted: G           O      4.19.0-custom+ #5
Call Trace:
  dump_stack+0x46/0x5b
  sysfs_warn_dup+0x53/0x60
  sysfs_add_file_mode_ns+0x16d/0x180
  sysfs_create_file_ns+0x51/0x60
  altera_cvp_probe+0x16f/0x2a0 [altera_cvp]
  local_pci_probe+0x3f/0xa0
  ? pci_match_device+0xb1/0xf0
  pci_device_probe+0x116/0x170
  really_probe+0x21b/0x2c0
  driver_probe_device+0x4b/0xe0
  bind_store+0xcb/0x130
  kernfs_fop_write+0xfd/0x180
  __vfs_write+0x21/0x150
  ? selinux_file_permission+0xdc/0x130
  vfs_write+0xa8/0x1a0
  ? find_vma+0xd/0x60
  ksys_write+0x3d/0x90
  do_syscall_64+0x44/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  ...
 altera-cvp 0000:0c:00.0: Can't create sysfs chkcfg file
 fpga_manager fpga3: fpga_mgr_unregister Altera CvP FPGA Manager @0000:0c:00.0

Move chkcfg creation to module init as suggested by Alan.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device

[ Upstream commit ceb94bc52c437463f0903e61060a94a2226fb672 ]

This patch adds a safety connection way for "forced_b_device" with
"workaround_for_vbus" like below:

< Example for R-Car E3 Ebisu >
 # modprobe <any usb gadget driver>
 # echo 1 > /sys/kernel/debug/ee020000.usb/b_device
 (connect a usb cable to host side.)
 # echo 2 > /sys/kernel/debug/ee020000.usb/b_device

Previous code should have connected a usb cable before the "b_device"
is set to 1 on the Ebisu board. However, if xHCI driver on the board
is probed, it causes some troubles:
 - Conflicts USB VBUS/signals between the board and another host.
 - "Cannot enable. Maybe the USB cable is bad?" might happen on
   both the board and another host with a usb hub.
 - Cannot enumerate a usb gadget correctly because an interruption
   of VBUS change happens unexpectedly.

Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: bpf: fix: error handling regarding kprobe_events

[ Upstream commit 5a863813216ce79e16a8c1503b2543c528b778b6 ]

Currently, kprobe_events failure won't be handled properly.
Due to calling system() indirectly to write to kprobe_events,
it can't be identified whether an error is derived from kprobe or system.

    // buf = "echo '%c:%s %s' >> /s/k/d/t/kprobe_events"
    err = system(buf);
    if (err < 0) {
        printf("failed to create kprobe ..");
        return -1;
    }

For example, running ./tracex7 sample in ext4 partition,
"echo p:open_ctree open_ctree >> /s/k/d/t/kprobe_events"
gets 256 error code system() failure.
=> The error comes from kprobe, but it's not handled correctly.

According to man of system(3), it's return value
just passes the termination status of the child shell
rather than treating the error as -1. (don't care success)

Which means, currently it's not working as desired.
(According to the upper code snippet)

    ex) running ./tracex7 with ext4 env.
    # Current Output
    sh: echo: I/O error
    failed to open event open_ctree

    # Desired Output
    failed to create kprobe 'open_ctree' error 'No such file or directory'

The problem is, error can't be verified whether from child ps
or system. But using write() directly can verify the command
failure, and it will treat all error as -1. So I suggest using
write() directly to 'kprobe_events' rather than calling system().

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table

[ Upstream commit ad9b2b8e53af61375322e3c7d624acf3a3ef53b0 ]

The public S805 datasheet only mentions that
HHI_SYS_CPU_CLK_CNTL1[20:29] contains a divider called "cpu_scale_div".
Unfortunately it does not mention how to use the register contents.

The Amlogic 3.10 GPL kernel sources are using the following code to
calculate the CPU clock based on that register (taken from
arch/arm/mach-meson8/clock.c in the 3.10 Amlogic kernel, shortened to
make it easier to read):
N = (aml_read_reg32(P_HHI_SYS_CPU_CLK_CNTL1) >> 20) & 0x3FF;
if (sel == 3) /* use cpu_scale_div */
  div = 2 * N;
else
  div = ... /* not relevant for this example */
cpu_clk = parent_clk / div;

This suggests that the formula is: parent_rate / 2 * register_value
However, running perf (which can measure the CPU clock rate thanks to
the ARM PMU) shows that this formula is not correct.
This can be reproduced with the following steps:
1. boot into u-boot
2. let the CPU clock run off the XTAL clock:
   mw.l 0xC110419C 0x30 1
3. set the cpu_scale_div register:
   to value 0x1: mw.l 0xC110415C 0x801016A2 1
   to value 0x2: mw.l 0xC110415C 0x802016A2 1
   to value 0x5: mw.l 0xC110415C 0x805016A2 1
4. let the CPU clock run off cpu_scale_div:
   mw.l 0xC110419C 0xbd 1
5. boot Linux
6. run: perf stat -aB stress --cpu 4 --timeout 10
7. check the "cycles" value

I get the following results depending on the cpu_scale_div value:
- (cpu_in_sel - this is the input clock for cpu_scale_div - runs at
   1.2GHz)
- 0x1 = 300MHz
- 0x2 = 200MHz
- 0x5 = 100MHz

This means that the actual formula to calculate the output of the
cpu_scale_div clock is: parent_rate / 2 * (register value + 1).

The register value 0x0 is reserved. When letting the CPU clock run off
the cpu_scale_div while the value is 0x0 the whole board hangs (even in
u-boot).

I also verified this with the TWD timer: when adding this to the .dts
without specifying it's clock it will auto-detect the PERIPH (which is
the input clock of the TWD) clock rate (and the result is shown in the
kernel log). On Meson8, Meson8b and Meson8m2 the PERIPH clock is CPUCLK
divided by 4. This also matched for all three test-cases from above (in
all cases the TWD timer clock rate was approx. one fourth of the CPU
clock rate).

A small note regarding the "fixes" tag: the original issue seems to
exist virtually since forever. Even commit 28b9fcd016126e ("clk:
meson8b: Add support for Meson8b clocks") seems to handle this wrong. I
still decided to use commit 251b6fd38bcb9c ("clk: meson: rework meson8b
cpu clock") because this is the first commit which gets the CPU hiearchy
correct and thus it's the first commit where the cpu_scale_div register
is used correctly (apart from the bug in the cpu_scale_table).

Fixes: 251b6fd38bcb9c ("clk: meson: rework meson8b cpu clock")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20180927085921.24627-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/atomic-helper: Complete fake_commit->flip_done potentially earlier

[ Upstream commit 2de42f79bb21a412f40ade8831eb6fc445cb78a4 ]

Consider the following scenario:
1. nonblocking enable crtc
2. wait for the event
3. nonblocking disable crtc

On i915 this can lead to a spurious -EBUSY from step 3 on
account of non-enabled planes getting the fake_commit in step 1
and we don't complete the fake_commit-> flip_done until
drm_atomic_helper_commit_hw_done() which can happen a long
time after the flip event was sent out.

This will become somewhat easy to hit on SKL+ once we start
to add all the planes for the crtc to every modeset commit
for the purposes of forcing a watermark register programming
[1].

To make the race a little less pronounced let's complete
fake_commit->flip_done after drm_atomic_helper_wait_for_flip_done().
For the single crtc case this should make the race quite
theoretical, assuming drm_atomic_helper_wait_for_flip_done()
actually has to wait for the real commit flip_done. In case
the real commit flip_done gets completed singificantly before
drm_atomic_helper_wait_for_flip_done(), or we are dealing with
multiple crtcs whose vblanks don't line up nicely the race still
exists.

[1] https://patchwork.freedesktop.org/patch/262670/

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 080de2e5be2d ("drm/atomic: Check for busy planes/connectors before setting the commit")
Testcase: igt/kms_cursor_legacy/*nonblocking-modeset-vs-cursor-atomic
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122143412.11655-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: perf: set suppress_bind_attrs flag to true

[ Upstream commit 81e9fa8bab381f8b6eb04df7cdf0f71994099bd4 ]

The armv8_pmuv3 driver doesn't have a remove function, and when the test
'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled, the following Call trace
can be seen.

[    1.424287] Failed to register pmu: armv8_pmuv3, reason -17
[    1.424870] WARNING: CPU: 0 PID: 1 at ../kernel/events/core.c:11771 perf_event_sysfs_init+0x98/0xdc
[    1.425220] Modules linked in:
[    1.425531] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W         4.19.0-rc7-next-20181012-00003-ge7a97b1ad77b-dirty #35
[    1.425951] Hardware name: linux,dummy-virt (DT)
[    1.426212] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    1.426458] pc : perf_event_sysfs_init+0x98/0xdc
[    1.426720] lr : perf_event_sysfs_init+0x98/0xdc
[    1.426908] sp : ffff00000804bd50
[    1.427077] x29: ffff00000804bd50 x28: ffff00000934e078
[    1.427429] x27: ffff000009546000 x26: 0000000000000007
[    1.427757] x25: ffff000009280710 x24: 00000000ffffffef
[    1.428086] x23: ffff000009408000 x22: 0000000000000000
[    1.428415] x21: ffff000009136008 x20: ffff000009408730
[    1.428744] x19: ffff80007b20b400 x18: 000000000000000a
[    1.429075] x17: 0000000000000000 x16: 0000000000000000
[    1.429418] x15: 0000000000000400 x14: 2e79726f74636572
[    1.429748] x13: 696420656d617320 x12: 656874206e692065
[    1.430060] x11: 6d616e20656d6173 x10: 2065687420687469
[    1.430335] x9 : ffff00000804bd50 x8 : 206e6f7361657220
[    1.430610] x7 : 2c3376756d705f38 x6 : ffff00000954d7ce
[    1.430880] x5 : 0000000000000000 x4 : 0000000000000000
[    1.431226] x3 : 0000000000000000 x2 : ffffffffffffffff
[    1.431554] x1 : 4d151327adc50b00 x0 : 0000000000000000
[    1.431868] Call trace:
[    1.432102]  perf_event_sysfs_init+0x98/0xdc
[    1.432382]  do_one_initcall+0x6c/0x1a8
[    1.432637]  kernel_init_freeable+0x1bc/0x280
[    1.432905]  kernel_init+0x18/0x160
[    1.433115]  ret_from_fork+0x10/0x18
[    1.433297] ---[ end trace 27fd415390eb9883 ]---

Rework to set suppress_bind_attrs flag to avoid removing the device when
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, since there's no real reason to
remove the armv8_pmuv3 driver.

Cc: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ecc - regularize scalar for scalar multiplication

[ Upstream commit 3da2c1dfdb802b184eea0653d1e589515b52d74b ]

ecc_point_mult is supposed to be used with a regularized scalar,
otherwise, it's possible to deduce the position of the top bit of the
scalar with timing attack. This is important when the scalar is a
private key.

ecc_point_mult is already using a regular algorithm (i.e. having an
operation flow independent of the input scalar) but regularization step
is not implemented.

Arrange scalar to always have fixed top bit by adding a multiple of the
curve order (n).

References:
The constant time regularization step is based on micro-ecc by Kenneth
MacKay and also referenced in the literature (Bernstein, D. J., & Lange,
T. (2017). Montgomery curves and the Montgomery ladder. (Cryptology
ePrint Archive; Vol. 2017/293). s.l.: IACR. Chapter 4.6.2.)

Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Cc: kernel-hardening@lists.openwall.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur

[ Upstream commit e4849aff1e169b86c561738daf8ff020e9de1011 ]

The Broadcom SiByte BCM1250, BCM1125, and BCM1125H SOCs have an onchip
DRAM controller that supports memory amounts of up to 16GiB, and due to
how the address decoder has been wired in the SOC any memory beyond 1GiB
is actually mapped starting from 4GiB physical up, that is beyond the
32-bit addressable limit[1].  Consequently if the maximum amount of
memory has been installed, then it will span up to 19GiB.

Many of the evaluation boards we support that are based on one of these
SOCs have their memory soldered and the amount present fits in the
32-bit address range.  The BCM91250A SWARM board however has actual DIMM
slots and accepts, depending on the peripherals revision of the SOC, up
to 4GiB or 8GiB of memory in commercially available JEDEC modules[2].
I believe this is also the case with the BCM91250C2 LittleSur board.
This means that up to either 3GiB or 7GiB of memory requires 64-bit
addressing to access.

I believe the BCM91480B BigSur board, which has the BCM1480 SOC instead,
accepts at least as much memory, although I have no documentation or
actual hardware available to verify that.

Both systems have PCI slots installed for use by any PCI option boards,
including ones that only support 32-bit addressing (additionally the
32-bit PCI host bridge of the BCM1250, BCM1125, and BCM1125H SOCs limits
addressing to 32-bits), and there is no IOMMU available.  Therefore for
PCI DMA to work in the presence of memory beyond enable swiotlb for the
affected systems.

All the other SOC onchip DMA devices use 40-bit addressing and therefore
can address the whole memory, so only enable swiotlb if PCI support and
support for DMA beyond 4GiB have been both enabled in the configuration
of the kernel.

This shows up as follows:

Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2)
Board type: SiByte BCM91250A (SWARM)
Determined physical RAM map:
 memory: 000000000fe7fe00 @ 0000000000000000 (usable)
 memory: 000000001ffffe00 @ 0000000080000000 (usable)
 memory: 000000000ffffe00 @ 00000000c0000000 (usable)
 memory: 0000000087fffe00 @ 0000000100000000 (usable)
software IO TLB: mapped [mem 0xcbffc000-0xcfffc000] (64MB)

in the bootstrap log and removes failures like these:

defxx 0000:02:00.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0
fddi0: Receive buffer allocation failed
fddi0: Adapter open failed!
IP-Config: Failed to open fddi0
defxx 0000:09:08.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0
fddi1: Receive buffer allocation failed
fddi1: Adapter open failed!
IP-Config: Failed to open fddi1

when memory beyond 4GiB is handed out to devices that can only do 32-bit
addressing.

This updates commit cce335ae47e2 ("[MIPS] 64-bit Sibyte kernels need
DMA32.").

References:

[1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R,
    Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview",
    "Memory Map", pp. 34-38

[2] "BCM91250A User Manual", Revision 91250A-UM100-R, Broadcom
    Corporation, 18 May 2004, Section 3: "Physical Description",
    "Supported DRAM", p. 23

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
[paul.burton@mips.com: Remove GPL text from dma.c; SPDX tag covers it]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/21108/
References: cce335ae47e2 ("[MIPS] 64-bit Sibyte kernels need DMA32.")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Fix -Wmissing-prototypes warnings

[ Upstream commit 68b5e4326e4b8ac9080835005d8254fed0fb3c56 ]

Add the proper includes and make smca_get_name() static.

Fix an actual bug too which the warning triggered:

  arch/x86/kernel/cpu/mcheck/therm_throt.c:395:39: error: conflicting \
  types for ‘smp_thermal_interrupt’
   asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r)
                                         ^~~~~~~~~~~~~~~~~~~~~
  In file included from arch/x86/kernel/cpu/mcheck/therm_throt.c:29:
  ./arch/x86/include/asm/traps.h:107:17: note: previous declaration of \
  ‘smp_thermal_interrupt’ was here
   asmlinkage void smp_thermal_interrupt(void);

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Yi Wang <wang.yi59@zte.com.cn>
Cc: Michael Matz <matz@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811081633160.1549@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: oxfw: add support for APOGEE duet FireWire

[ Upstream commit fba43f454cdf9caa3185219d116bd2a6e6354552 ]

This commit adds support for APOGEE duet FireWire, launched 2007, already
discontinued. This model uses Oxford Semiconductor FW971 as its
communication engine. Below is information on Configuration ROM of this
unit. The unit supports some AV/C commands defined by Audio subunit
specification and vendor dependent commands.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': False,
                'chip_ID': 42949742248,
                'cmc': False,
                'cyc_clk_acc': 255,
                'generation': 0,
                'imc': False,
                'isc': True,
                'link_spd': 3,
                'max_ROM': 0,
                'max_rec': 64,
                'name': '1394',
                'node_vendor_ID': 987,
                'pmc': False},
  'root-directory': [ ['VENDOR', 987],
                      ['DESCRIPTOR', 'Apogee Electronics'],
                      ['MODEL', 122333],
                      ['DESCRIPTOR', 'Duet'],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': False},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 41005],
                          ['VERSION', 65537],
                          ['MODEL', 122333],
                          ['DESCRIPTOR', 'Duet']]]]}

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Allow narrow loads with offset > 0

[ Upstream commit 46f53a65d2de3e1591636c22b626b09d8684fd71 ]

Currently BPF verifier allows narrow loads for a context field only with
offset zero. E.g. if there is a __u32 field then only the following
loads are permitted:
  * off=0, size=1 (narrow);
  * off=0, size=2 (narrow);
  * off=0, size=4 (full).

On the other hand LLVM can generate a load with offset different than
zero that make sense from program logic point of view, but verifier
doesn't accept it.

E.g. tools/testing/selftests/bpf/sendmsg4_prog.c has code:

  #define DST_IP4 0xC0A801FEU /* 192.168.1.254 */
  ...
   if ((ctx->user_ip4 >> 24) == (bpf_htonl(DST_IP4) >> 24) &&

where ctx is struct bpf_sock_addr.

Some versions of LLVM can produce the following byte code for it:

       8:       71 12 07 00 00 00 00 00         r2 = *(u8 *)(r1 + 7)
       9:       67 02 00 00 18 00 00 00         r2 <<= 24
      10:       18 03 00 00 00 00 00 fe 00 00 00 00 00 00 00 00         r3 = 4261412864 ll
      12:       5d 32 07 00 00 00 00 00         if r2 != r3 goto +7 <LBB0_6>

where `*(u8 *)(r1 + 7)` means narrow load for ctx->user_ip4 with size=1
and offset=3 (7 - sizeof(ctx->user_family) = 3). This load is currently
rejected by verifier.

Verifier code that rejects such loads is in bpf_ctx_narrow_access_ok()
what means any is_valid_access implementation, that uses the function,
works this way, e.g. bpf_skb_is_valid_access() for __sk_buff or
sock_addr_is_valid_access() for bpf_sock_addr.

The patch makes such loads supported. Offset can be in [0; size_default)
but has to be multiple of load size. E.g. for __u32 field the following
loads are supported now:
  * off=0, size=1 (narrow);
  * off=1, size=1 (narrow);
  * off=2, size=1 (narrow);
  * off=3, size=1 (narrow);
  * off=0, size=2 (narrow);
  * off=2, size=2 (narrow);
  * off=0, size=4 (full).

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: set suppress_bind_attrs flag only if builtin

[ Upstream commit 646097940ad35aa2c1f2012af932d55976a9f255 ]

When the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled,
arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init).
devtmpfs gets killed because we try to remove a file and decrement the
wb reference count before the noop_backing_device_info gets initialized.

[    0.332075] Serial: AMBA PL011 UART driver
[    0.485276] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1
[    0.502382] console [ttyAMA0] enabled
[    0.515710] Unable to handle kernel paging request at virtual address 0000800074c12000
[    0.516053] Mem abort info:
[    0.516222]   ESR = 0x96000004
[    0.516417]   Exception class = DABT (current EL), IL = 32 bits
[    0.516641]   SET = 0, FnV = 0
[    0.516826]   EA = 0, S1PTW = 0
[    0.516984] Data abort info:
[    0.517149]   ISV = 0, ISS = 0x00000004
[    0.517339]   CM = 0, WnR = 0
[    0.517553] [0000800074c12000] user address but active_mm is swapper
[    0.517928] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    0.518305] Modules linked in:
[    0.518839] CPU: 0 PID: 13 Comm: kdevtmpfs Not tainted 4.19.0-rc5-next-20180928-00002-g2ba39ab0cd01-dirty #82
[    0.519307] Hardware name: linux,dummy-virt (DT)
[    0.519681] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    0.519959] pc : __destroy_inode+0x94/0x2a8
[    0.520212] lr : __destroy_inode+0x78/0x2a8
[    0.520401] sp : ffff0000098c3b20
[    0.520590] x29: ffff0000098c3b20 x28: 00000000087a3714
[    0.520904] x27: 0000000000002000 x26: 0000000000002000
[    0.521179] x25: ffff000009583000 x24: 0000000000000000
[    0.521467] x23: ffff80007bb52000 x22: ffff80007bbaa7c0
[    0.521737] x21: ffff0000093f9338 x20: 0000000000000000
[    0.522033] x19: ffff80007bbb05d8 x18: 0000000000000400
[    0.522376] x17: 0000000000000000 x16: 0000000000000000
[    0.522727] x15: 0000000000000400 x14: 0000000000000400
[    0.523068] x13: 0000000000000001 x12: 0000000000000001
[    0.523421] x11: 0000000000000000 x10: 0000000000000970
[    0.523749] x9 : ffff0000098c3a60 x8 : ffff80007bbab190
[    0.524017] x7 : ffff80007bbaa880 x6 : 0000000000000c88
[    0.524305] x5 : ffff0000093d96c8 x4 : 61c8864680b583eb
[    0.524567] x3 : ffff0000093d6180 x2 : ffffffffffffffff
[    0.524872] x1 : 0000800074c12000 x0 : 0000800074c12000
[    0.525207] Process kdevtmpfs (pid: 13, stack limit = 0x(____ptrval____))
[    0.525529] Call trace:
[    0.525806]  __destroy_inode+0x94/0x2a8
[    0.526108]  destroy_inode+0x34/0x88
[    0.526370]  evict+0x144/0x1c8
[    0.526636]  iput+0x184/0x230
[    0.526871]  dentry_unlink_inode+0x118/0x130
[    0.527152]  d_delete+0xd8/0xe0
[    0.527420]  vfs_unlink+0x240/0x270
[    0.527665]  handle_remove+0x1d8/0x330
[    0.527875]  devtmpfsd+0x138/0x1c8
[    0.528085]  kthread+0x14c/0x158
[    0.528291]  ret_from_fork+0x10/0x18
[    0.528720] Code: 92800002 aa1403e0 d538d081 8b010000 (c85f7c04)
[    0.529367] ---[ end trace 5a3dee47727f877c ]---

Rework to set suppress_bind_attrs flag to avoid removing the device when
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y. This applies for pic32_uart and
xilinx_uartps as well.

Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

writeback: don't decrement wb->refcnt if !wb->bdi

[ Upstream commit 347a28b586802d09604a149c1a1f6de5dccbe6fa ]

This happened while running in qemu-system-aarch64, the AMBA PL011 UART
driver when enabling CONFIG_DEBUG_TEST_DRIVER_REMOVE.
arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init),
devtmpfs' handle_remove() crashes because the reference count is a NULL
pointer only because wb->bdi hasn't been initialized yet.

Rework so that wb_put have an extra check if wb->bdi before decrement
wb->refcnt and also add a WARN_ON_ONCE to get a warning if it happens again
in other drivers.

Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: overlay: add missing of_node_put() after add new node to changeset

[ Upstream commit 7c528e457d53c75107d5aa56892316d265c778de ]

The refcount of a newly added overlay node decrements to one
(instead of zero) when the overlay changeset is destroyed.  This
change will cause the final decrement be to zero.

After applying this patch, new validation warnings will be
reported from the devicetree unittest during boot due to
a pre-existing devicetree bug.  The warnings will be similar to:

  OF: ERROR: memory leak before free overlay changeset,  /testcase-data/overlay-node/test-bus/test-unittest4

This pre-existing devicetree bug will also trigger a WARN_ONCE() from
refcount_sub_and_test_checked() when an overlay changeset is
destroyed without having first been applied.  This scenario occurs
when an error in the overlay is detected during the overlay changeset
creation:

  WARNING: CPU: 0 PID: 1 at lib/refcount.c:187 refcount_sub_and_test_checked+0xa8/0xbc
  refcount_t: underflow; use-after-free.

  (unwind_backtrace) from (show_stack+0x10/0x14)
  (show_stack) from (dump_stack+0x6c/0x8c)
  (dump_stack) from (__warn+0xdc/0x104)
  (__warn) from (warn_slowpath_fmt+0x44/0x6c)
  (warn_slowpath_fmt) from (refcount_sub_and_test_checked+0xa8/0xbc)
  (refcount_sub_and_test_checked) from (kobject_put+0x24/0x208)
  (kobject_put) from (of_changeset_destroy+0x2c/0xb4)
  (of_changeset_destroy) from (free_overlay_changeset+0x1c/0x9c)
  (free_overlay_changeset) from (of_overlay_remove+0x284/0x2cc)
  (of_overlay_remove) from (of_unittest_apply_revert_overlay_check.constprop.4+0xf8/0x1e8)
  (of_unittest_apply_revert_overlay_check.constprop.4) from (of_unittest_overlay+0x960/0xed8)
  (of_unittest_overlay) from (of_unittest+0x1cc4/0x2138)
  (of_unittest) from (do_one_initcall+0x4c/0x28c)
  (do_one_initcall) from (kernel_init_freeable+0x29c/0x378)
  (kernel_init_freeable) from (kernel_init+0x8/0x110)
  (kernel_init) from (ret_from_fork+0x14/0x2c)

Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: enable (uncomment) all tests in test_libbpf.sh

[ Upstream commit f96afa767baffba7645f5e10998f5178948bb9aa ]

libbpf is now able to load successfully test_l4lb_noinline.o and
samples/bpf/tracex3_kern.o.

For the test_l4lb_noinline, uncomment related tests from test_libbpf.c
and remove the associated "TODO".

For tracex3_kern.o, instead of loading a program from samples/bpf/ that
might not have been compiled at this stage, try loading a program from
BPF selftests. Since this test case is about loading a program compiled
without the "-target bpf" flag, change the Makefile to compile one
program accordingly (instead of passing the flag for compiling all
programs).

Regarding test_xdp_noinline.o: in its current shape the program fails to
load because it provides no version section, but the loader needs one.
The test was added to make sure that libbpf could load XDP programs even
if they do not provide a version number in a dedicated section. But
libbpf is already capable of doing that: in our case loading fails
because the loader does not know that this is an XDP program (it does
not need to, since it does not attach the program). So trying to load
test_xdp_noinline.o does not bring much here: just delete this subtest.

For the record, the error message obtained with tracex3_kern.o was
fixed by commit e3d91b0ca523 ("tools/libbpf: handle issues with bpf ELF
objects containing .eh_frames")

I have not been abled to reproduce the "libbpf: incorrect bpf_call
opcode" error for test_l4lb_noinline.o, even with the version of libbpf
present at the time when test_libbpf.sh and test_libbpf_open.c were
created.

RFC -> v1:
- Compile test_xdp without the "-target bpf" flag, and try to load it
  instead of ../../samples/bpf/tracex3_kern.o.
- Delete test_xdp_noinline.o subtest.

Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tcpm: Do not disconnect link for self powered devices

[ Upstream commit 23b5f73266e59a598c1e5dd435d87651b5a7626b ]

During HARD_RESET the data link is disconnected.
For self powered device, the spec is advising against doing that.

>From USB_PD_R3_0
7.1.5 Response to Hard Resets
Device operation during and after a Hard Reset is defined as follows:
Self-powered devices Should Not disconnect from USB during a Hard Reset
(see Section 9.1.2).
Bus powered devices will disconnect from USB during a Hard Reset due to the
loss of their power source.

Tackle this by letting TCPM know whether the device is self or bus powered.

This overcomes unnecessary port disconnections from hard reset.
Also, speeds up the enumeration time when connected to Type-A ports.

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---------
Version history:
V3:
Rebase on top of usb-next

V2:
Based on feedback from heikki.krogerus@linux.intel.com
- self_powered added to the struct tcpm_port which is populated from
  a. "connector" node of the device tree in tcpm_fw_get_caps()
  b. "self_powered" node of the tcpc_config in tcpm_copy_caps

Based on feedbase from linux@roeck-us.net
- Code was refactored
- SRC_HARD_RESET_VBUS_OFF sets the link state to false based
  on self_powered flag

V1 located here:
https://lkml.org/lkml/2018/9/13/94
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000e: allow non-monotonic SYSTIM readings

[ Upstream commit e1f65b0d70e9e5c80e15105cd96fa00174d7c436 ]

It seems with some NICs supported by the e1000e driver a SYSTIM reading
may occasionally be few microseconds before the previous reading and if
enabled also pass e1000e_sanitize_systim() without reaching the maximum
number of rereads, even if the function is modified to check three
consecutive readings (i.e. it doesn't look like a double read error).
This causes an underflow in the timecounter and the PHC time jumps hours
ahead.

This was observed on 82574, I217 and I219. The fastest way to reproduce
it is to run a program that continuously calls the PTP_SYS_OFFSET ioctl
on the PHC.

Modify e1000e_phc_gettime() to use timecounter_cyc2time() instead of
timecounter_read() in order to allow non-monotonic SYSTIM readings and
prevent the PHC from jumping.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey

[ Upstream commit 78f3ac76d9e5219589718b9e4733bee21627b3f5 ]

In the past, Asus firmwares would change the panel backlight directly
through the EC when the display off hotkey (Fn+F7) was pressed, and
only notify the OS of such change, with 0x33 when the LCD was ON and
0x34 when the LCD was OFF. These are currently mapped to
KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively.

Most recently the EC on Asus most machines lost ability to toggle the
LCD backlight directly, but unless the OS informs the firmware it is
going to handle the display toggle hotkey events, the firmware still
tries change the brightness through the EC, to no effect. The end result
is a long list (at Endless we counted 11) of Asus laptop models where
the display toggle hotkey does not perform any action. Our firmware
engineers contacts at Asus were surprised that there were still machines
out there with the old behavior.

Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device
tells the firmware that it should let the OS handle the display toggle
event, in which case it will simply notify the OS of a key press with
0x35, as shown by the DSDT excerpts bellow.

 Scope (_SB)
 {
     (...)

     Device (ATKD)
     {
         (...)

         Name (_WDG, Buffer (0x28)
         {
             /* 0000 */  0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11,
             /* 0008 */  0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66,
             /* 0010 */  0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B,
             /* 0018 */  0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A,
             /* 0020 */  0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08
         })
         Method (WMNB, 3, Serialized)
         {
             CreateDWordField (Arg2, Zero, IIA0)
             CreateDWordField (Arg2, 0x04, IIA1)
             Local0 = (Arg1 & 0xFFFFFFFF)

             (...)

             If ((Local0 == 0x53564544))
             {
                 (...)

                 If ((IIA0 == 0x00050011))
                 {
                     If ((IIA1 == 0x02))
                     {
                         ^^PCI0.SBRG.EC0.SPIN (0x72, One)
                         ^^PCI0.SBRG.EC0.BLCT = One
                     }

                     Return (One)
                 }
             }
             (...)
         }
         (...)
     }
     (...)
 }
 (...)

 Scope (_SB.PCI0.SBRG.EC0)
 {
     (...)

     Name (BLCT, Zero)

     (...)

     Method (_Q10, 0, NotSerialized)  // _Qxx: EC Query
     {
         If ((BLCT == Zero))
         {
             Local0 = One
             Local0 = RPIN (0x72)
             Local0 ^= One
             SPIN (0x72, Local0)
             If (ATKP)
             {
                 Local0 = (0x34 - Local0)
                 ^^^^ATKD.IANE (Local0)
             }
         }
         ElseIf ((BLCT == One))
         {
             If (ATKP)
             {
                 ^^^^ATKD.IANE (0x35)
             }
         }
     }
     (...)
 }

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: allow IPsec Tx offload in VEPA mode

[ Upstream commit 7fa57ca443cffe81ce8416b57966bfb0370678a1 ]

When it's possible that the PF might end up trying to send a
packet to one of its own VFs, we have to forbid IPsec offload
because the device drops the packets into a black hole.
See commit 47b6f50077e6 ("ixgbe: disallow IPsec Tx offload
when in SR-IOV mode") for more info.

This really is only necessary when the device is in the default
VEB mode.  If instead the device is running in VEPA mode,
the packets will go through the encryption engine and out the
MAC/PHY as normal, and get "hairpinned" as needed by the switch.

So let's not block IPsec offload when in VEPA mode.  To get
there with the ixgbe device, use the handy 'bridge' command:
bridge link set dev eth1 hwmode vepa

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: fix interrupt spin lock

[ Upstream commit 2383a767c0ca06f96534456d8313909017c6c8d0 ]

Vega10 has multiple interrupt rings, so this can be called from multiple
calles at the same time resulting in:

[   71.779334] ================================
[   71.779406] WARNING: inconsistent lock state
[   71.779478] 4.19.0-rc1+ #44 Tainted: G        W
[   71.779565] --------------------------------
[   71.779637] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[   71.779740] kworker/6:1/120 [HC0[0]:SC0[0]:HE1:SE1] takes:
[   71.779832] 00000000ad761971 (&(&kfd->interrupt_lock)->rlock){?...},
at: kgd2kfd_interrupt+0x75/0x100 [amdgpu]
[   71.780058] {IN-HARDIRQ-W} state was registered at:
[   71.780115]   _raw_spin_lock+0x2c/0x40
[   71.780180]   kgd2kfd_interrupt+0x75/0x100 [amdgpu]
[   71.780248]   amdgpu_irq_callback+0x6c/0x150 [amdgpu]
[   71.780315]   amdgpu_ih_process+0x88/0x100 [amdgpu]
[   71.780380]   amdgpu_irq_handler+0x20/0x40 [amdgpu]
[   71.780409]   __handle_irq_event_percpu+0x49/0x2a0
[   71.780436]   handle_irq_event_percpu+0x30/0x70
[   71.780461]   handle_irq_event+0x37/0x60
[   71.780484]   handle_edge_irq+0x83/0x1b0
[   71.780506]   handle_irq+0x1f/0x30
[   71.780526]   do_IRQ+0x53/0x110
[   71.780544]   ret_from_intr+0x0/0x22
[   71.780566]   cpuidle_enter_state+0xaa/0x330
[   71.780591]   do_idle+0x203/0x280
[   71.780610]   cpu_startup_entry+0x6f/0x80
[   71.780634]   start_secondary+0x1b0/0x200
[   71.780657]   secondary_startup_64+0xa4/0xb0

Fix this by always using irq save spin locks.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Guard against null stream_state in set_crc_source

[ Upstream commit f41a895026b8cb6f765190de7d2e7bc3ccbbd183 ]

[Why]

The igt@kms_plane@pixel-format-pipe tests can create a sequence where
stream_state is NULL during amdgpu_dm_crtc_set_crc_source which results
in a null pointer dereference.

[How]

Guard against stream_state being NULL before accessing its fields. This
doesn't fix the root cause of the issue so a DRM_ERROR is generated
to still fail the tests.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pl061: Move irq_chip definition inside struct pl061

[ Upstream commit ed8dce4c6f726b7f3c6bf40859b92a9e32f189c1 ]

Keeping the irq_chip definition static will make it shared with multiple
giochips in the system. This practice is considered to be bad and now we
will get the below warning from gpiolib core:

"detected irqchip that is shared with multiple gpiochips: please fix the
driver."

Hence, move the irq_chip definition from static to `struct pl061` for
using a unique irq_chip for each gpiochip.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: Allow matching on destination MAC address for mac and ipmac sets

[ Upstream commit 8cc4ccf58379935f3ad456cc34e61c4e4c921d0e ]

There doesn't seem to be any reason to restrict MAC address
matching to source MAC addresses in set types bitmap:ipmac,
hash:ipmac and hash:mac. With this patch, and this setup:

  ip netns add A
  ip link add veth1 type veth peer name veth2 netns A
  ip addr add 192.0.2.1/24 dev veth1
  ip -net A addr add 192.0.2.2/24 dev veth2
  ip link set veth1 up
  ip -net A link set veth2 up

  ip netns exec A ipset create test hash:mac
  dst=$(ip netns exec A cat /sys/class/net/veth2/address)
  ip netns exec A ipset add test ${dst}
  ip netns exec A iptables -P INPUT DROP
  ip netns exec A iptables -I INPUT -m set --match-set test dst -j ACCEPT

ipset will match packets based on destination MAC address:

  # ping -c1 192.0.2.2 >/dev/null
  # echo $?
  0

Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: clear skb->tstamp in bridge forwarding path

[ Upstream commit 41d1c8839e5f8cb781cc635f12791decee8271b7 ]

Matteo reported forwarding issues inside the linux bridge,
if the enslaved interfaces use the fq qdisc.

Similar to commit 8203e2d844d3 ("net: clear skb->tstamp in
forwarding paths"), we need to clear the tstamp field in
the bridge forwarding path.

Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Reported-and-tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses

[ Upstream commit d4a7e9bb74b5aaf07b89f6531c080b1130bdf019 ]

I realized the last patch calls dev_get_by_index_rcu in a branch not
holding the rcu lock. Add the calls to rcu_read_lock and rcu_read_unlock.

Fixes: ec90ad334986 ("ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: Add support for new Realtek Ethernet

[ Upstream commit 36352991835ce99e46b4441dd0eb6980f9a83e8f ]

There are two new Realtek Ethernet devices which are re-branded r8168h.
Add the IDs to to support them.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qmi_wwan: add MTU default to qmap network interface

[ Upstream commit f87118d5760f00af7228033fbe783c7f380d2866 ]

This patch adds MTU default value to qmap network interface in
order to avoid "RTNETLINK answers: No buffer space available"
error when setting an ipv6 address.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net, skbuff: do not prefer skb allocation fails early

[ Upstream commit f8c468e8537925e0c4607263f498a1b7c0c8982e ]

Commit dcda9b04713c ("mm, tree wide: replace __GFP_REPEAT by
__GFP_RETRY_MAYFAIL with more useful semantic") replaced __GFP_REPEAT in
alloc_skb_with_frags() with __GFP_RETRY_MAYFAIL when the allocation may
directly reclaim.

The previous behavior would require reclaim up to 1 << order pages for
skb aligned header_len of order > PAGE_ALLOC_COSTLY_ORDER before failing,
otherwise the allocations in alloc_skb() would loop in the page allocator
looking for memory.  __GFP_RETRY_MAYFAIL makes both allocations failable
under memory pressure, including for the HEAD allocation.

This can cause, among many other things, write() to fail with ENOTCONN
during RPC when under memory pressure.

These allocations should succeed as they did previous to dcda9b04713c
even if it requires calling the oom killer and additional looping in the
page allocator to find memory.  There is no way to specify the previous
behavior of __GFP_REPEAT, but it's unlikely to be necessary since the
previous behavior only guaranteed that 1 << order pages would be reclaimed
before failing for order > PAGE_ALLOC_COSTLY_ORDER.  That reclaim is not
guaranteed to be contiguous memory, so repeating for such large orders is
usually not beneficial.

Removing the setting of __GFP_RETRY_MAYFAIL to restore the previous
behavior, specifically not allowing alloc_skb() to fail for small orders
and oom kill if necessary rather than allowing RPCs to fail.

Fixes: dcda9b04713c ("mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic")
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: mv88x6xxx: mv88e6390 errata

[ Upstream commit ea89098ef9a574bceca00d3b5df14aaf0b3f9ccf ]

The 6390 copper ports have an errata which require poking magic values
into undocumented magic registers and then performing a software
reset.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum_switchdev: Set PVID correctly during VLAN deletion

[ Upstream commit 674bed5df4cab8f96d04f7b99608883a48f9226b ]

When a VLAN is deleted from a bridge port we should not change the PVID
unless the deleted VLAN is the PVID.

Fixes: fe9ccc785de5 ("mlxsw: spectrum_switchdev: Don't batch VLAN operations")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlxsw: spectrum: Disable lag port TX before removing it

[ Upstream commit 8adbe212a159d9c78a90fca1d854f6e63452426b ]

Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave()
is called and prevent from possible EMAD error.

Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address

[ Upstream commit ec90ad334986fa5856d11dd272f7f22fa86c55c4 ]

Similar to c5ee066333eb ("ipv6: Consider sk_bound_dev_if when binding a
socket to an address"), binding a socket to v4 mapped addresses needs to
consider if the socket is bound to a device.

This problem also exists from the beginning of git history.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.19.17

nbd: Use set_blocksize() to set device blocksize

commit c8a83a6b54d0ca078de036aafb3f6af58c1dc5eb upstream.

NBD can update block device block size implicitely through
bd_set_size(). Make it explicitely set blocksize with set_blocksize() as
this behavior of bd_set_size() is going away.

CC: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vb2: be sure to unlock mutex on errors

commit c06ef2e9acef4cda1feee2ce055b8086e33d251a upstream.

As reported by smatch:
drivers/media/common/videobuf2/videobuf2-core.c: drivers/media/common/videobuf2/videobuf2-core.c:2159 vb2_mmap() warn: inconsistent returns 'mutex:&q->mmap_lock'.
  Locked on:   line 2148
  Unlocked on: line 2100
               line 2108
               line 2113
               line 2118
               line 2156
               line 2159

There is one error condition that doesn't unlock a mutex.

Fixes: cd26d1c4d1bc ("media: vb2: vb2_mmap: move lock up")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: Fix test errors related to lib.mk khdr target

commit 211929fd3f7c8de4d541b1cc243b82830e5ea1e8 upstream.

Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") added
khdr target to run headers_install target from the main Makefile. The
logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize
variables and include files to run headers_install from the top level
Makefile. There are a few problems with this logic.

1. Exposes top_srcdir to all tests
2. Common logic impacts all tests
3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests
   add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in
   some cases, and STATIC_LIBS in other cases. This makes this framework
   confusing to use.

The common logic that runs for all tests even when KSFT_KHDR_INSTALL
isn't defined by the test. top_srcdir is initialized to a default value
when test doesn't initialize it. It works for all tests without a sub-dir
structure and tests with sub-dir structure fail to build.

e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf

../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make: *** No rule to make target '../../../../scripts/subarch.include'.  Stop.

There is no reason to require all tests to define top_srcdir and there is
no need to require tests to add khdr dependency using adhoc changes to
TEST_* and other variables.

Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests
that have the dependency on headers_install.

Change common logic to include khdr target define and "all" target with
dependency on khdr when KSFT_KHDR_INSTALL is defined.

Only tests that have dependency on headers_install have to define just
the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to
specify khdr dependency in the test Makefiles.

Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk")
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock

commit 66a8d5bfb518f9f12d47e1d2dce1732279f9451e upstream.

Strict requirement of pixclock to be zero breaks support of SDL 1.2
which contains hardcoded table of supported video modes with non-zero
pixclock values[1].

To better understand which pixclock values are considered valid and how
driver should handle these values, I briefly examined few existing fbdev
drivers and documentation in Documentation/fb/. And it looks like there
are no strict rules on that and actual behaviour varies:

* some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c);
* some treat (pixclock == 0) as invalid value which leads to
  -EINVAL (clps711x-fb.c);
* some pass converted pixclock value to hardware (uvesafb.c);
* some are trying to find nearest value from predefined table
          (vga16fb.c, video_gx.c).

Given this, I believe that it should be safe to just ignore this value if
changing is not supported. It seems that any portable fbdev application
which was not written only for one specific device working under one
specific kernel version should not rely on any particular behaviour of
pixclock anyway.

However, while enabling SDL1 applications to work out of the box when
there is no /etc/fb.modes with valid settings, this change affects the
video mode choosing logic in SDL. Depending on current screen
resolution, contents of /etc/fb.modes and resolution requested by
application, this may lead to user-visible difference (not always):
image will be displayed in a right way, but it will be aligned to the
left instead of center. There is no "right behaviour" here as well, as
emulated fbdev, opposing to old fbdev drivers, simply ignores any
requsts of video mode changes with resolutions smaller than current.

The easiest way to reproduce this problem is to install sdl-sopwith[2],
remove /etc/fb.modes file if it exists, and then try to run sopwith
from console without X. At least in Fedora 29, sopwith may be simply
installed from standard repositories.

[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings
[2] http://sdl-sopwith.sourceforge.net/

Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 79e539453b34e ("DRM: i915: add mode setting support")
Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware")
Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: drop caches if offset or block_size are changed

commit 5db470e229e22b7eda6e23b5566e532c96fb5bc3 upstream.

If we don't drop caches used in old offset or block_size, we can get old data
from new offset/block_size, which gives unexpected data to user.

For example, Martijn found a loopback bug in the below scenario.
1) LOOP_SET_FD loads first two pages on loop file
2) LOOP_SET_STATUS64 changes the offset on the loop file
3) mount is failed due to the cached pages having wrong superblock

Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Reported-by: Martijn Coenen <maco@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Fix double mutex_unlock(&loop_ctl_mutex) in loop_control_ioctl()

commit 628bd85947091830a8c4872adfd5ed1d515a9cf2 upstream.

Commit 0a42e99b58a20883 ("loop: Get rid of loop_index_mutex") forgot to
remove mutex_unlock(&loop_ctl_mutex) from loop_control_ioctl() when
replacing loop_index_mutex with loop_ctl_mutex.

Fixes: 0a42e99b58a20883 ("loop: Get rid of loop_index_mutex")
Reported-by: syzbot <syzbot+c0138741c2290fc5e63f@syzkaller.appspotmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Get rid of 'nested' acquisition of loop_ctl_mutex

commit c28445fa06a3a54e06938559b9514c5a7f01c90f upstream.

The nested acquisition of loop_ctl_mutex (->lo_ctl_mutex back then) has
been introduced by commit f028f3b2f987e "loop: fix circular locking in
loop_clr_fd()" to fix lockdep complains about bd_mutex being acquired
after lo_ctl_mutex during partition rereading. Now that these are
properly fixed, let's stop fooling lockdep.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Avoid circular locking dependency between loop_ctl_mutex and bd_mutex

commit 1dded9acf6dc9a34cd27fcf8815507e4e65b3c4f upstream.

Code in loop_change_fd() drops reference to the old file (and also the
new file in a failure case) under loop_ctl_mutex. Similarly to a
situation in loop_set_fd() this can create a circular locking dependency
if this was the last reference holding the file open. Delay dropping of
the file reference until we have released loop_ctl_mutex.

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Fix deadlock when calling blkdev_reread_part()

commit 0da03cab87e6323ff2e05b14bc7d5c6fcc531efd upstream.

Calling blkdev_reread_part() under loop_ctl_mutex causes lockdep to
complain about circular lock dependency between bdev->bd_mutex and
lo->lo_ctl_mutex. The problem is that on loop device open or close
lo_open() and lo_release() get called with bdev->bd_mutex held and they
need to acquire loop_ctl_mutex. OTOH when loop_reread_partitions() is
called with loop_ctl_mutex held, it will call blkdev_reread_part() which
acquires bdev->bd_mutex. See syzbot report for details [1].

Move call to blkdev_reread_part() in __loop_clr_fd() from under
loop_ctl_mutex to finish fixing of the lockdep warning and the possible
deadlock.

[1] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d1588

Reported-by: syzbot <syzbot+4684a000d5abdade83fac55b1e7d1f935ef1936e@syzkaller.appspotmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Move loop_reread_partitions() out of loop_ctl_mutex

commit 85b0a54a82e4fbceeb1aebb7cb6909edd1a24668 upstream.

Calling loop_reread_partitions() under loop_ctl_mutex causes lockdep to
complain about circular lock dependency between bdev->bd_mutex and
lo->lo_ctl_mutex. The problem is that on loop device open or close
lo_open() and lo_release() get called with bdev->bd_mutex held and they
need to acquire loop_ctl_mutex. OTOH when loop_reread_partitions() is
called with loop_ctl_mutex held, it will call blkdev_reread_part() which
acquires bdev->bd_mutex. See syzbot report for details [1].

Move all calls of loop_rescan_partitions() out of loop_ctl_mutex to
avoid lockdep warning and fix deadlock possibility.

[1] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d1588

Reported-by: syzbot <syzbot+4684a000d5abdade83fac55b1e7d1f935ef1936e@syzkaller.appspotmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Move special partition reread handling in loop_clr_fd()

commit d57f3374ba4817f7c8d26fae8a13d20ac8d31b92 upstream.

The call of __blkdev_reread_part() from loop_reread_partition() happens
only when we need to invalidate partitions from loop_release(). Thus
move a detection for this into loop_clr_fd() and simplify
loop_reread_partition().

This makes loop_reread_partition() safe to use without loop_ctl_mutex
because we use only lo->lo_number and lo->lo_file_name in case of error
for reporting purposes (thus possibly reporting outdate information is
not a big deal) and we are safe from 'lo' going away under us by
elevated lo->lo_refcnt.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Push loop_ctl_mutex down to loop_change_fd()

commit c371077000f4138ee3c15fbed50101ff24bdc91d upstream.

Push loop_ctl_mutex down to loop_change_fd(). We will need this to be
able to call loop_reread_partitions() without loop_ctl_mutex.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Push loop_ctl_mutex down to loop_set_fd()

commit 757ecf40b7e029529768eb5f9562d5eeb3002106 upstream.

Push lo_ctl_mutex down to loop_set_fd(). We will need this to be able to
call loop_reread_partitions() without lo_ctl_mutex.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Push loop_ctl_mutex down to loop_set_status()

commit 550df5fdacff94229cde0ed9b8085155654c1696 upstream.

Push loop_ctl_mutex down to loop_set_status(). We will need this to be
able to call loop_reread_partitions() without loop_ctl_mutex.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Push loop_ctl_mutex down to loop_get_status()

commit 4a5ce9ba5877e4640200d84a735361306ad1a1b8 upstream.

Push loop_ctl_mutex down to loop_get_status() to avoid the unusual
convention that the function gets called with loop_ctl_mutex held and
releases it.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Push loop_ctl_mutex down into loop_clr_fd()

commit 7ccd0791d98531df7cd59e92d55e4f063d48a070 upstream.

loop_clr_fd() has a weird locking convention that is expects
loop_ctl_mutex held, releases it on success and keeps it on failure.
Untangle the mess by moving locking of loop_ctl_mutex into
loop_clr_fd().

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Split setting of lo_state from loop_clr_fd

commit a2505b799a496b7b84d9a4a14ec870ff9e42e11b upstream.

Move setting of lo_state to Lo_rundown out into the callers. That will
allow us to unlock loop_ctl_mutex while the loop device is protected
from other changes by its special state.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Push lo_ctl_mutex down into individual ioctls

commit a13165441d58b216adbd50252a9cc829d78a6bce upstream.

Push acquisition of lo_ctl_mutex down into individual ioctl handling
branches. This is a preparatory step for pushing the lock down into
individual ioctl handling functions so that they can release the lock as
they need it. We also factor out some simple ioctl handlers that will
not need any special handling to reduce unnecessary code duplication.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Get rid of loop_index_mutex

commit 0a42e99b58a208839626465af194cfe640ef9493 upstream.

Now that loop_ctl_mutex is global, just get rid of loop_index_mutex as
there is no good reason to keep these two separate and it just
complicates the locking.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Fold __loop_release into loop_release

commit 967d1dc144b50ad005e5eecdfadfbcfb399ffff6 upstream.

__loop_release() has a single call site. Fold it there. This is
currently not a huge win but it will make following replacement of
loop_index_mutex more obvious.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block/loop: Use global lock for ioctl() operation.

commit 310ca162d779efee8a2dc3731439680f3e9c1e86 upstream.

syzbot is reporting NULL pointer dereference [1] which is caused by
race condition between ioctl(loop_fd, LOOP_CLR_FD, 0) versus
ioctl(other_loop_fd, LOOP_SET_FD, loop_fd) due to traversing other
loop devices at loop_validate_file() without holding corresponding
lo->lo_ctl_mutex locks.

Since ioctl() request on loop devices is not frequent operation, we don't
need fine grained locking. Let's use global lock in order to allow safe
traversal at loop_validate_file().

Note that syzbot is also reporting circular locking dependency between
bdev->bd_mutex and lo->lo_ctl_mutex [2] which is caused by calling
blkdev_reread_part() with lock held. This patch does not address it.

[1] https://syzkaller.appspot.com/bug?id=f3cfe26e785d85f9ee259f385515291d21bd80a3
[2] https://syzkaller.appspot.com/bug?id=bf154052f0eea4bc7712499e4569505907d15889

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+bf89c128e05dd6c62523@syzkaller.appspotmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block/loop: Don't grab "struct file" for vfs_getattr() operation.

commit b1ab5fa309e6c49e4e06270ec67dd7b3e9971d04 upstream.

vfs_getattr() needs "struct path" rather than "struct file".
Let's use path_get()/path_put() rather than get_file()/fput().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix uninit-value in tipc_nl_compat_doit

commit 2753ca5d9009c180dbfd4c802c80983b4b6108d1 upstream.

BUG: KMSAN: uninit-value in tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335
CPU: 0 PID: 4514 Comm: syz-executor485 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:53
 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
 tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335
 tipc_nl_compat_recv+0x164b/0x2700 net/tipc/netlink_compat.c:1153
 genl_family_rcv_msg net/netlink/genetlink.c:599 [inline]
 genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624
 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447
 genl_rcv+0x63/0x80 net/netlink/genetlink.c:635
 netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
 netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337
 netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900
 sock_sendmsg_nosec net/socket.c:630 [inline]
 sock_sendmsg net/socket.c:640 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
 __sys_sendmsg net/socket.c:2080 [inline]
 SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
 SyS_sendmsg+0x54/0x80 net/socket.c:2087
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fda9
RSP: 002b:00007ffd0c184ba8 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fda9
RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 00000000004016d0
R13: 0000000000401760 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
 kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
 slab_post_alloc_hook mm/slab.h:445 [inline]
 slab_alloc_node mm/slub.c:2737 [inline]
 __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:984 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline]
 netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875
 sock_sendmsg_nosec net/socket.c:630 [inline]
 sock_sendmsg net/socket.c:640 [inline]
 ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
 __sys_sendmsg net/socket.c:2080 [inline]
 SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
 SyS_sendmsg+0x54/0x80 net/socket.c:2087
 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x3d/0xa2

In tipc_nl_compat_recv(), when the len variable returned by
nlmsg_attrlen() is 0, the message is still treated as a valid one,
which is obviously unresonable. When len is zero, it means the
message not only doesn't contain any valid TLV payload, but also
TLV header is not included. Under this stituation, tlv_type field
in TLV header is still accessed in tipc_nl_compat_dumpit() or
tipc_nl_compat_doit(), but the field space is obviously illegal.
Of course, it is not initialized.

Reported-by: syzbot+bca0dc46634781f08b38@syzkaller.appspotmail.com
Reported-by: syzbot+6bdb590321a7ae40c1a6@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix uninit-value in tipc_nl_compat_name_table_dump

commit 974cb0e3e7c963ced06c4e32c5b2884173fa5e01 upstream.

syzbot reported:

BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in tipc_nl_compat_name_table_dump+0x4a8/0xba0 net/tipc/netlink_compat.c:826
CPU: 0 PID: 6290 Comm: syz-executor848 Not tainted 4.19.0-rc8+ #70
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x306/0x460 lib/dump_stack.c:113
 kmsan_report+0x1a2/0x2e0 mm/kmsan/kmsan.c:917
 __msan_warning+0x7c/0xe0 mm/kmsan/kmsan_instr.c:500
 __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
 __fswab32 include/uapi/linux/swab.h:59 [inline]
 tipc_nl_compat_name_table_dump+0x4a8/0xba0 net/tipc/netlink_compat.c:826
 __tipc_nl_compat_dumpit+0x59e/0xdb0 net/tipc/netlink_compat.c:205
 tipc_nl_compat_dumpit+0x63a/0x820 net/tipc/netlink_compat.c:270
 tipc_nl_compat_handle net/tipc/netlink_compat.c:1151 [inline]
 tipc_nl_compat_recv+0x1402/0x2760 net/tipc/netlink_compat.c:1210
 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
 genl_rcv_msg+0x185c/0x1a20 net/netlink/genetlink.c:626
 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2454
 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x166d/0x1720 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x1391/0x1420 net/netlink/af_netlink.c:1908
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x307/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440179
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffecec49318 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440179
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000401a00
R13: 0000000000401a90 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:255 [inline]
 kmsan_internal_poison_shadow+0xc8/0x1d0 mm/kmsan/kmsan.c:180
 kmsan_kmalloc+0xa4/0x120 mm/kmsan/kmsan_hooks.c:104
 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:113
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2727 [inline]
 __kmalloc_node_track_caller+0xb43/0x1400 mm/slub.c:4360
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x422/0xe90 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:996 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
 netlink_sendmsg+0xcaf/0x1420 net/netlink/af_netlink.c:1883
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x307/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

We cannot take for granted the thing that the length of data contained
in TLV is longer than the size of struct tipc_name_table_query in
tipc_nl_compat_name_table_dump().

Reported-by: syzbot+06e771a754829716a327@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix uninit-value in tipc_nl_compat_link_set

commit edf5ff04a45750ac8ce2435974f001dc9cfbf055 upstream.

syzbot reports following splat:

BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486
CPU: 1 PID: 9306 Comm: syz-executor172 Not tainted 4.20.0-rc7+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x173/0x1d0 lib/dump_stack.c:113
  kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
  __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
  strlen+0x3b/0xa0 lib/string.c:486
  nla_put_string include/net/netlink.h:1154 [inline]
  __tipc_nl_compat_link_set net/tipc/netlink_compat.c:708 [inline]
  tipc_nl_compat_link_set+0x929/0x1220 net/tipc/netlink_compat.c:744
  __tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline]
  tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344
  tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline]
  tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210
  genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
  genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626
  netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477
  genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
  netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
  netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336
  netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg net/socket.c:631 [inline]
  ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
  __sys_sendmsg net/socket.c:2154 [inline]
  __do_sys_sendmsg net/socket.c:2163 [inline]
  __se_sys_sendmsg+0x305/0x460 net/socket.c:2161
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
  do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
  entry_SYSCALL_64_after_hwframe+0x63/0xe7

The uninitialised access happened in
    nla_put_string(skb, TIPC_NLA_LINK_NAME, lc->name)

This is because lc->name string is not validated before it's used.

Reported-by: syzbot+d78b8a29241a195aefb8@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix uninit-value in tipc_nl_compat_bearer_enable

commit 0762216c0ad2a2fccd63890648eca491f2c83d9a upstream.

syzbot reported:

BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:484
CPU: 1 PID: 6371 Comm: syz-executor652 Not tainted 4.19.0-rc8+ #70
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x306/0x460 lib/dump_stack.c:113
 kmsan_report+0x1a2/0x2e0 mm/kmsan/kmsan.c:917
 __msan_warning+0x7c/0xe0 mm/kmsan/kmsan_instr.c:500
 strlen+0x3b/0xa0 lib/string.c:484
 nla_put_string include/net/netlink.h:1011 [inline]
 tipc_nl_compat_bearer_enable+0x238/0x7b0 net/tipc/netlink_compat.c:389
 __tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline]
 tipc_nl_compat_doit+0x39f/0xae0 net/tipc/netlink_compat.c:344
 tipc_nl_compat_recv+0x147c/0x2760 net/tipc/netlink_compat.c:1107
 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
 genl_rcv_msg+0x185c/0x1a20 net/netlink/genetlink.c:626
 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2454
 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x166d/0x1720 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x1391/0x1420 net/netlink/af_netlink.c:1908
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x307/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440179
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffef7beee8 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440179
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000401a00
R13: 0000000000401a90 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:255 [inline]
 kmsan_internal_poison_shadow+0xc8/0x1d0 mm/kmsan/kmsan.c:180
 kmsan_kmalloc+0xa4/0x120 mm/kmsan/kmsan_hooks.c:104
 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:113
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2727 [inline]
 __kmalloc_node_track_caller+0xb43/0x1400 mm/slub.c:4360
 __kmalloc_reserve net/core/skbuff.c:138 [inline]
 __alloc_skb+0x422/0xe90 net/core/skbuff.c:206
 alloc_skb include/linux/skbuff.h:996 [inline]
 netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
 netlink_sendmsg+0xcaf/0x1420 net/netlink/af_netlink.c:1883
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 ___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
 __sys_sendmsg net/socket.c:2154 [inline]
 __do_sys_sendmsg net/socket.c:2163 [inline]
 __se_sys_sendmsg+0x307/0x460 net/socket.c:2161
 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
 do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7

The root cause is that we don't validate whether bear name is a valid
string in tipc_nl_compat_bearer_enable().

Meanwhile, we also fix the same issue in the following functions:
tipc_nl_compat_bearer_disable()
tipc_nl_compat_link_stat_dump()
tipc_nl_compat_media_set()
tipc_nl_compat_bearer_set()

Reported-by: syzbot+b33d5cae0efd35dbfe77@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>