profile/ivi/kernel-x86-ivi.git
10 years agoARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP
Will Deacon [Tue, 19 Nov 2013 14:46:11 +0000 (15:46 +0100)]
ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP

Uwe reported a build failure when targetting a NOMMU platform with my
recent prefetch changes:

  arch/arm/lib/changebit.S: Assembler messages:
  arch/arm/lib/changebit.S:15: Error: architectural extension `mp' is
not allowed for the current base architecture

This is due to use of the .arch_extension mp directive immediately prior
to an ALT_SMP(...) instruction. Whilst the ALT_SMP macro will expand to
nothing if !CONFIG_SMP, gas will still choke on the directive.

This patch fixes the issue by only emitting the sequence (including the
directive) if CONFIG_SMP=y.

Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
10 years agoPCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()
Yinghai Lu [Tue, 19 Nov 2013 00:02:45 +0000 (17:02 -0700)]
PCI: Remove duplicate pci_disable_device() from pcie_portdrv_remove()

The pcie_portdrv .probe() method calls pci_enable_device() once, in
pcie_port_device_register(), but the .remove() method calls
pci_disable_device() twice, in pcie_port_device_remove() and in
pcie_portdrv_remove().

That causes a "disabling already-disabled device" warning when removing a
PCIe port device.  This happens all the time when removing Thunderbolt
devices, but is also easy to reproduce with, e.g.,
"echo 0000:00:1c.3 > /sys/bus/pci/drivers/pcieport/unbind"

This patch removes the disable from pcie_portdrv_remove().

[bhelgaas: changelog, tag for stable]
Reported-by: David Bulkow <David.Bulkow@stratus.com>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v2.6.32+
10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88...
Linus Torvalds [Wed, 20 Nov 2013 23:03:45 +0000 (15:03 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha

Pull alpha updates from Matt Turner:
 "It contains a few fixes and some work from Richard to make alpha
  emulation under QEMU much more usable"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Prevent a NULL ptr dereference in csum_partial_copy.
  alpha: perf: fix out-of-bounds array access triggered from raw event
  alpha: Use qemu+cserve provided high-res clock and alarm.
  alpha: Switch to GENERIC_CLOCKEVENTS
  alpha: Enable the rpcc clocksource for single processor
  alpha: Reorganize rtc handling
  alpha: Primitive support for CPU power down.
  alpha: Allow HZ to be configured
  alpha: Notice if we're being run under QEMU
  alpha: Eliminate compiler warning from memset macro

10 years agoMerge branch 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Wed, 20 Nov 2013 23:02:50 +0000 (15:02 -0800)]
Merge branch 'parisc-3.13' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:
 - revert an access_ok() patch which broke 32bit userspace on 64bit
   kernels
 - avoid a gcc miscompilation in two internal pa_memcpy() functions by
   not inlining those
 - do not export the definition of SOCK_NONBLOCK via uapi header (fixes
   build of audit package)
 - depending on the fault type we now correctly report either SIGBUS or
   SIGSEGV
 - a small fix to not compare a size_t variable for < 0

* 'parisc-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: size_t is unsigned, so comparison size < 0 doesn't make sense.
  parisc: improve SIGBUS/SIGSEGV error reporting
  parisc: break out SOCK_NONBLOCK define to own asm header file
  parisc: do not inline pa_memcpy() internal functions
  Revert "parisc: implement full version of access_ok()"

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt...
Linus Torvalds [Wed, 20 Nov 2013 23:02:22 +0000 (15:02 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/egtvedt/linux-avr32

Pull AVR32 updates from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: uapi: be sure of "_UAPI" prefix for all guard macros
  avr32: add kprobe_ctlblk memory struct
  avr32: fix out-of-range jump in large kernels
  avr32: setup crt for early panic()

10 years agoMerge tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl...
Linus Torvalds [Wed, 20 Nov 2013 22:51:37 +0000 (14:51 -0800)]
Merge tag 'squashfs-updates' of git://git./linux/kernel/git/pkl/squashfs-next

Pull squashfs updates from Phillip Lougher:
 "These patches optionally improve the multi-threading peformance of
  Squashfs by adding parallel decompression, and direct decompression
  into the page cache, eliminating an intermediate buffer (removing
  memcpy overhead and lock contention)"

* tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next:
  Squashfs: Check stream is not NULL in decompressor_multi.c
  Squashfs: Directly decompress into the page cache for file data
  Squashfs: Restructure squashfs_readpage()
  Squashfs: Generalise paging handling in the decompressors
  Squashfs: add multi-threaded decompression using percpu variable
  squashfs: Enhance parallel I/O
  Squashfs: Refactor decompressor interface and code

10 years agoRevert "mm: create a separate slab for page->ptl allocation"
Linus Torvalds [Wed, 20 Nov 2013 22:41:47 +0000 (14:41 -0800)]
Revert "mm: create a separate slab for page->ptl allocation"

This reverts commit ea1e7ed33708c7a760419ff9ded0a6cb90586a50.

Al points out that while the commit *does* actually create a separate
slab for the page->ptl allocation, that slab is never actually used, and
the code continues to use kmalloc/kfree.

Damien Wyart points out that the original patch did have the conversion
to use kmem_cache_alloc/free, so it got lost somewhere on its way to me.

Revert the half-arsed attempt that didn't do anything.  If we really do
want the special slab (remember: this is all relevant just for debug
builds, so it's not necessarily all that critical) we might as well redo
the patch fully.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Wed, 20 Nov 2013 22:25:39 +0000 (14:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs bits and pieces from Al Viro:
 "Assorted bits that got missed in the first pull request + fixes for a
  couple of coredump regressions"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fold try_to_ascend() into the sole remaining caller
  dcache.c: get rid of pointless macros
  take read_seqbegin_or_lock() and friends to seqlock.h
  consolidate simple ->d_delete() instances
  gfs2: endianness misannotations
  dump_emit(): use __kernel_write(), not vfs_write()
  dump_align(): fix the dumb braino

10 years agoWrong page freed on preallocate_pmds() failure exit
Al Viro [Wed, 20 Nov 2013 22:16:36 +0000 (22:16 +0000)]
Wrong page freed on preallocate_pmds() failure exit

Note that pmds[i] is simply uninitialized at that point...

Granted, it's very hard to hit (you need split page locks *and*
kmalloc(sizeof(spinlock_t), GFP_KERNEL) failing), but the code is
obviously bogus.

Introduced by commit 09ef4939850a ("x86: add missed
pgtable_pmd_page_ctor/dtor calls for preallocated pmds")

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agopowerpc: Wrong DWARF CFI in the kernel vdso for little-endian / ELFv2
Ulrich Weigand [Wed, 20 Nov 2013 20:38:05 +0000 (07:38 +1100)]
powerpc: Wrong DWARF CFI in the kernel vdso for little-endian / ELFv2

I've finally tracked down why my CR signal-unwind test case still
fails on little-endian.  The problem turned to be that the kernel
installs a signal trampoline in the vDSO, and provides a DWARF CFI
record for that trampoline.  This CFI describes the save location
for CR:

  rsave (70, 38*RSIZE + (RSIZE - CRSIZE))

which is correct for big-endian, but points to the wrong word on
little-endian.   This is wrong no matter which ABI.

In addition, for the ELFv2 ABI, we should not only provide a CFI
record for register 70 (cr2), but for all CR fields separately.
Strictly speaking, I guess this would mean providing two separate
vDSO images, one for ELFv1 processes and one for ELFv2 processes (or
maybe playing some tricks with conditional DWARF expressions).
However, having CFI records for the other CR fields in ELFv1 is not
actually wrong, they just will be ignored.   So it seems the simplest
fix would be just to always provide CFI for all the fields.

Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopowerpc: Add pseries_le_defconfig
Anton Blanchard [Wed, 20 Nov 2013 11:15:06 +0000 (22:15 +1100)]
powerpc: Add pseries_le_defconfig

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopowerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.
Anton Blanchard [Wed, 20 Nov 2013 11:15:05 +0000 (22:15 +1100)]
powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.

With the little endian support merged, we can add the
CONFIG_CPU_LITTLE_ENDIAN kernel config option.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopowerpc: Don't use ELFv2 ABI to build the kernel
Alistair Popple [Wed, 20 Nov 2013 11:15:04 +0000 (22:15 +1100)]
powerpc: Don't use ELFv2 ABI to build the kernel

The kernel doesn't build correctly using the ELFv2 ABI.  This patch
ensures that the ELFv1 ABI is used when building a kernel with an
ELFv2 enabled compiler.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopowerpc: ELF2 binaries signal handling
Rusty Russell [Wed, 20 Nov 2013 11:15:03 +0000 (22:15 +1100)]
powerpc: ELF2 binaries signal handling

For the ELFv2 ABI, the hander is the entry point, not a function descriptor.
We also need to set up r12, and fortunately the fast_exception_return
exit path restores r12 for us so nothing else is required.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopowerpc: ELF2 binaries launched directly.
Rusty Russell [Wed, 20 Nov 2013 11:15:02 +0000 (22:15 +1100)]
powerpc: ELF2 binaries launched directly.

No function descriptor, but we set r12 up and set TIF_RESTOREALL as it
normally isn't restored on return from syscall.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopowerpc: Set eflags correctly for ELF ABIv2 core dumps.
Rusty Russell [Wed, 20 Nov 2013 11:15:01 +0000 (22:15 +1100)]
powerpc: Set eflags correctly for ELF ABIv2 core dumps.

We leave it at zero (though it could be 1) for old tasks.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopowerpc: Add TIF_ELF2ABI flag.
Rusty Russell [Wed, 20 Nov 2013 11:15:00 +0000 (22:15 +1100)]
powerpc: Add TIF_ELF2ABI flag.

Little endian ppc64 is getting an exciting new ABI.  This is reflected
by the bottom two bits of e_flags in the ELF header:

0 == legacy binaries (v1 ABI)
1 == binaries using the old ABI (compiled with a new toolchain)
2 == binaries using the new ABI.

We store this in a thread flag, because we need to set it in core
dumps and for signal delivery.  Our chief concern is that it doesn't
use function descriptors.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopseries: Add H_SET_MODE to change exception endianness
Anton Blanchard [Wed, 20 Nov 2013 11:14:59 +0000 (22:14 +1100)]
pseries: Add H_SET_MODE to change exception endianness

On little endian builds call H_SET_MODE so exceptions have the
correct endianness. We need to reset the endian during kexec
so do that in the MMU hashtable clear callback.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agopowerpc/pseries: Fix endian issues in pseries EEH code
Anton Blanchard [Wed, 20 Nov 2013 11:14:58 +0000 (22:14 +1100)]
powerpc/pseries: Fix endian issues in pseries EEH code

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
10 years agoMerge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafae...
Linus Torvalds [Wed, 20 Nov 2013 21:25:04 +0000 (13:25 -0800)]
Merge tag 'pm+acpi-2-3.13-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:

 - ACPI-based device hotplug fixes for issues introduced recently and a
   fix for an older error code path bug in the ACPI PCI host bridge
   driver

 - Fix for recently broken OMAP cpufreq build from Viresh Kumar

 - Fix for a recent hibernation regression related to s2disk

 - Fix for a locking-related regression in the ACPI EC driver from
   Puneet Kumar

 - System suspend error code path fix related to runtime PM and runtime
   PM documentation update from Ulf Hansson

 - cpufreq's conservative governor fix from Xiaoguang Chen

 - New processor IDs for intel_idle and turbostat and removal of an
   obsolete Kconfig option from Len Brown

 - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
   ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg

 - Removal of several ACPI video DMI blacklist entries that are not
   necessary any more from Aaron Lu

 - Rework of the ACPI companion representation in struct device and code
   cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
   Jarkko Nikula

 - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
   Jarkko Nikula

* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
  PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
  ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
  ACPI / PCI root: Clear driver_data before failing enumeration
  ACPI / hotplug: Fix PCI host bridge hot removal
  ACPI / hotplug: Fix acpi_bus_get_device() return value check
  cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
  ACPI / video: clean up DMI table for initial black screen problem
  ACPI / EC: Ensure lock is acquired before accessing ec struct members
  PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
  ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
  spi: Use stable dev_name for ACPI enumerated SPI slaves
  i2c: Use stable dev_name for ACPI enumerated I2C slaves
  ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
  ACPI / bind: Use (put|get)_device() on ACPI device objects too
  ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
  ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
  cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
  PM / Runtime: Fix error path for prepare
  PM / Runtime: Update documentation around probe|remove|suspend
  cpufreq: conservative: set requested_freq to policy max when it is over policy max
  ...

10 years agoMerge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Wed, 20 Nov 2013 21:20:24 +0000 (13:20 -0800)]
Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...

10 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Wed, 20 Nov 2013 21:06:20 +0000 (13:06 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block IO fixes from Jens Axboe:
 "Normally I'd defer my initial for-linus pull request until after the
  merge window, but a race was uncovered in the virtio-blk conversion to
  blk-mq that could cause hangs.  So here's a small collection of fixes
  for you to pull:

   - The fix for the virtio-blk IO hang reported by Dave Chinner, from
     Shaohua and myself.

   - Add the Insert blktrace event for blk-mq.  This makes 'btt' happy
     when it is doing it's state transition analysis.

   - Ensure that blk-mq has disk/partition stats enabled by default,
     instead of making it opt-in.

   - A fix for __bio_add_page() and large sector counts"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: add blktrace insert event trace
  virtio-blk: virtqueue_kick() must be ordered with other virtqueue operations
  blk-mq: ensure that we set REQ_IO_STAT so diskstats work
  bio: fix argument of __bio_add_page() for max_sectors > 0xffff

10 years agoMerge tag 'md/3.13' of git://neil.brown.name/md
Linus Torvalds [Wed, 20 Nov 2013 21:05:25 +0000 (13:05 -0800)]
Merge tag 'md/3.13' of git://neil.brown.name/md

Pull md update from Neil Brown:
 "Mostly optimisations and obscure bug fixes.
   - raid5 gets less lock contention
   - raid1 gets less contention between normal-io and resync-io during
     resync"

* tag 'md/3.13' of git://neil.brown.name/md:
  md/raid5: Use conf->device_lock protect changing of multi-thread resources.
  md/raid5: Before freeing old multi-thread worker, it should flush them.
  md/raid5: For stripe with R5_ReadNoMerge, we replace REQ_FLUSH with REQ_NOMERGE.
  UAPI: include <asm/byteorder.h> in linux/raid/md_p.h
  raid1: Rewrite the implementation of iobarrier.
  raid1: Add some macros to make code clearly.
  raid1: Replace raise_barrier/lower_barrier with freeze_array/unfreeze_array when reconfiguring the array.
  raid1: Add a field array_frozen to indicate whether raid in freeze state.
  md: Convert use of typedef ctl_table to struct ctl_table
  md/raid5: avoid deadlock when raid5 array has unack badblocks during md_stop_writes.
  md: use MD_RECOVERY_INTR instead of kthread_should_stop in resync thread.
  md: fix some places where mddev_lock return value is not checked.
  raid5: Retry R5_ReadNoMerge flag when hit a read error.
  raid5: relieve lock contention in get_active_stripe()
  raid5: relieve lock contention in get_active_stripe()
  wait: add wait_event_cmd()
  md/raid5.c: add proper locking to error path of raid5_start_reshape.
  md: fix calculation of stacking limits on level change.
  raid5: Use slow_path to release stripe when mddev->thread is null

10 years agobridge: flush br's address entry in fdb when remove the
Ding Tianhong [Sat, 7 Dec 2013 14:12:05 +0000 (22:12 +0800)]
bridge: flush br's address entry in fdb when remove the

 bridge dev

When the following commands are executed:

brctl addbr br0
ifconfig br0 hw ether <addr>
rmmod bridge

The calltrace will occur:

[  563.312114] device eth1 left promiscuous mode
[  563.312188] br0: port 1(eth1) entered disabled state
[  563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects
[  563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G           O 3.12.0-0.7-default+ #9
[  563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  563.468200]  0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8
[  563.468204]  ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8
[  563.468206]  ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78
[  563.468209] Call Trace:
[  563.468218]  [<ffffffff814d1c92>] dump_stack+0x6a/0x78
[  563.468234]  [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100
[  563.468242]  [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge]
[  563.468247]  [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge]
[  563.468254]  [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0
[  563.468259]  [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b
[  570.377958] Bridge firewalling registered

--------------------------- cut here -------------------------------

The reason is that when the bridge dev's address is changed, the
br_fdb_change_mac_address() will add new address in fdb, but when
the bridge was removed, the address entry in the fdb did not free,
the bridge_fdb_cache still has objects when destroy the cache, Fix
this by flushing the bridge address entry when removing the bridge.

v2: according to the Toshiaki Makita and Vlad's suggestion, I only
    delete the vlan0 entry, it still have a leak here if the vlan id
    is other number, so I need to call fdb_delete_by_port(br, NULL, 1)
    to flush all entries whose dst is NULL for the bridge.

Suggested-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: core: Always propagate flag changes to interfaces
Vlad Yasevich [Wed, 20 Nov 2013 01:47:15 +0000 (20:47 -0500)]
net: core: Always propagate flag changes to interfaces

The following commit:
    b6c40d68ff6498b7f63ddf97cf0aa818d748dee7
    net: only invoke dev->change_rx_flags when device is UP

tried to fix a problem with VLAN devices and promiscuouse flag setting.
The issue was that VLAN device was setting a flag on an interface that
was down, thus resulting in bad promiscuity count.
This commit blocked flag propagation to any device that is currently
down.

A later commit:
    deede2fabe24e00bd7e246eb81cd5767dc6fcfc7
    vlan: Don't propagate flag changes on down interfaces

fixed VLAN code to only propagate flags when the VLAN interface is up,
thus fixing the same issue as above, only localized to VLAN.

The problem we have now is that if we have create a complex stack
involving multiple software devices like bridges, bonds, and vlans,
then it is possible that the flags would not propagate properly to
the physical devices.  A simple examle of the scenario is the
following:

  eth0----> bond0 ----> bridge0 ---> vlan50

If bond0 or eth0 happen to be down at the time bond0 is added to
the bridge, then eth0 will never have promisc mode set which is
currently required for operation as part of the bridge.  As a
result, packets with vlan50 will be dropped by the interface.

The only 2 devices that implement the special flag handling are
VLAN and DSA and they both have required code to prevent incorrect
flag propagation.  As a result we can remove the generic solution
introduced in b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 and leave
it to the individual devices to decide whether they will block
flag propagation or not.

Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Suggested-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoipv4: fix race in concurrent ip_route_input_slow()
Alexei Starovoitov [Wed, 20 Nov 2013 03:12:34 +0000 (19:12 -0800)]
ipv4: fix race in concurrent ip_route_input_slow()

CPUs can ask for local route via ip_route_input_noref() concurrently.
if nh_rth_input is not cached yet, CPUs will proceed to allocate
equivalent DSTs on 'lo' and then will try to cache them in nh_rth_input
via rt_cache_route()
Most of the time they succeed, but on occasion the following two lines:
orig = *p;
prev = cmpxchg(p, orig, rt);
in rt_cache_route() do race and one of the cpus fails to complete cmpxchg.
But ip_route_input_slow() doesn't check the return code of rt_cache_route(),
so dst is leaking. dst_destroy() is never called and 'lo' device
refcnt doesn't go to zero, which can be seen in the logs as:
unregister_netdevice: waiting for lo to become free. Usage count = 1
Adding mdelay() between above two lines makes it easily reproducible.
Fix it similar to nh_pcpu_rth_output case.

Fixes: d2d68ba9fe8b ("ipv4: Cache input routes in fib_info nexthops.")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'r8152'
David S. Miller [Wed, 20 Nov 2013 20:10:24 +0000 (15:10 -0500)]
Merge branch 'r8152'

Hayes Wang says:

====================
r8152 bug fixes

For the patch #3, I add netif_tx_lock() before checking the
netif_queue_stopped(). Besides, I add checking the skb queue
length before waking the tx queue.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: fix incorrect type in assignment
hayeswang [Wed, 20 Nov 2013 09:30:57 +0000 (17:30 +0800)]
r8152: fix incorrect type in assignment

The data from the hardware should be little endian. Correct the
declaration.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: support stopping/waking tx queue
hayeswang [Wed, 20 Nov 2013 09:30:56 +0000 (17:30 +0800)]
r8152: support stopping/waking tx queue

The maximum packet number which a tx aggregation buffer could contain
is the tx_qlen.

tx_qlen = buffer size / (packet size + descriptor size).

If the tx buffer is empty and the queued packets are more than the
maximum value which is defined above, stop the tx queue. Wake the
tx queue if tx queue is stopped and the queued packets are less than
tx_qlen.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: modify the tx flow
hayeswang [Wed, 20 Nov 2013 09:30:55 +0000 (17:30 +0800)]
r8152: modify the tx flow

Remove the code for sending the packet in the rtl8152_start_xmit().
Let rtl8152_start_xmit() to queue the packet only, and schedule a
tasklet to send the queued packets. This simplify the code and make
sure all the packet would be sent by the original order.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: fix tx/rx memory overflow
hayeswang [Wed, 20 Nov 2013 09:30:54 +0000 (17:30 +0800)]
r8152: fix tx/rx memory overflow

The tx/rx would access the memory which is out of the desired range.
Modify the method of checking the end of the memory to avoid it.

For r8152_tx_agg_fill(), the variable remain may become negative.
However, the declaration is unsigned, so the while loop wouldn't
break when reaching the end of the desied memory. Although to change
the declaration from unsigned to signed is enough to fix it, I also
modify the checking method for safe. Replace

remain = rx_buf_sz - sizeof(*tx_desc) -
 (u32)((void *)tx_data - agg->head);

with

remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);

to make sure the variable remain is always positive. Then, the
overflow wouldn't happen.

For rx_bottom(), the rx_desc should not be used to calculate the
packet length before making sure the rx_desc is in the desired range.
Change the checking to two parts. First, check the descriptor is in
the memory. The other, using the descriptor to find out the packet
length and check if the packet is in the memory.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoiscsi-target: Expose default_erl as TPG attribute
Nicholas Bellinger [Wed, 20 Nov 2013 19:57:18 +0000 (11:57 -0800)]
iscsi-target: Expose default_erl as TPG attribute

This patch exposes default_erl as a TPG attribute so that it may be
set TPG wide in demo-mode, but still allow the existing NodeACL
attribute to be overridden on a per initiator basis.

Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agotarget_core_configfs: split up ALUA supported states
Hannes Reinecke [Tue, 19 Nov 2013 08:07:51 +0000 (09:07 +0100)]
target_core_configfs: split up ALUA supported states

Split up the various ALUA states into individual attributes to
make parsing easier and adhere to the one value per attribute
sysfs principle.

(nab: Convert strict_strtoul -> kstrtoul usage)

Signed-off-by: Hannes Reinecke <hare@suse.de>
10 years agotarget_core_alua: Make supported states configurable
Hannes Reinecke [Tue, 19 Nov 2013 08:07:50 +0000 (09:07 +0100)]
target_core_alua: Make supported states configurable

Signed-off-by: Hannes Reinecke <hare@suse.de>
10 years agotarget_core_alua: Store supported ALUA states
Hannes Reinecke [Tue, 19 Nov 2013 08:07:49 +0000 (09:07 +0100)]
target_core_alua: Store supported ALUA states

The supported ALUA states might be different for individual
devices, so store it in a separate field.

(nab: Remove unnecessary line continuation)

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agotarget_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
Hannes Reinecke [Tue, 19 Nov 2013 08:07:48 +0000 (09:07 +0100)]
target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED

Rename ALUA_ACCESS_STATE_OPTMIZED to
ALUA_ACCESS_STATE_OPTIMIZED.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agotarget_core_alua: spellcheck
Hannes Reinecke [Tue, 19 Nov 2013 08:07:47 +0000 (09:07 +0100)]
target_core_alua: spellcheck

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agotarget core: rename (ex,im)plict -> (ex,im)plicit
Hannes Reinecke [Tue, 19 Nov 2013 08:07:46 +0000 (09:07 +0100)]
target core: rename (ex,im)plict -> (ex,im)plicit

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agohwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check
Yijing Wang [Wed, 20 Nov 2013 09:28:23 +0000 (17:28 +0800)]
hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check

Since acpi_bus_get_device() returns plain int and not acpi_status,
ACPI_FAILURE() should not be used for checking its return value.  Fix
that.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
10 years agoALSA: hda - Fix unbalanced runtime PM notification at resume
Takashi Iwai [Wed, 20 Nov 2013 11:15:07 +0000 (12:15 +0100)]
ALSA: hda - Fix unbalanced runtime PM notification at resume

When a codec is resumed, it keeps the power on while the resuming
phase via hda_keep_power_on(), then turns down via
snd_hda_power_down().  At that point, snd_hda_power_down() notifies
the power down to the controller, and this may confuse the refcount if
the codec was already powered up before the resume.

In the end result, the controller goes to runtime suspend even before
the codec is kicked off to the power save, and the communication
stalls happens.

The fix is to add the power-up notification together with
hda_keep_power_on(), and clears the flag appropriately.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agoMerge remote-tracking branch 'asoc/fix/wm8962' into asoc-linus
Mark Brown [Wed, 20 Nov 2013 15:20:38 +0000 (15:20 +0000)]
Merge remote-tracking branch 'asoc/fix/wm8962' into asoc-linus

10 years agoMerge remote-tracking branch 'asoc/fix/rcar' into asoc-linus
Mark Brown [Wed, 20 Nov 2013 15:20:38 +0000 (15:20 +0000)]
Merge remote-tracking branch 'asoc/fix/rcar' into asoc-linus

10 years agoMerge remote-tracking branch 'asoc/fix/fsl' into asoc-linus
Mark Brown [Wed, 20 Nov 2013 15:20:31 +0000 (15:20 +0000)]
Merge remote-tracking branch 'asoc/fix/fsl' into asoc-linus

10 years agoMerge remote-tracking branch 'asoc/fix/dma' into asoc-linus
Mark Brown [Wed, 20 Nov 2013 15:20:31 +0000 (15:20 +0000)]
Merge remote-tracking branch 'asoc/fix/dma' into asoc-linus

10 years agoMerge remote-tracking branch 'asoc/fix/cs42l52' into asoc-linus
Mark Brown [Wed, 20 Nov 2013 15:20:30 +0000 (15:20 +0000)]
Merge remote-tracking branch 'asoc/fix/cs42l52' into asoc-linus

10 years agoMerge remote-tracking branch 'asoc/fix/blackfin' into asoc-linus
Mark Brown [Wed, 20 Nov 2013 15:20:30 +0000 (15:20 +0000)]
Merge remote-tracking branch 'asoc/fix/blackfin' into asoc-linus

10 years agoMerge remote-tracking branch 'asoc/fix/arizona' into asoc-linus
Mark Brown [Wed, 20 Nov 2013 15:20:30 +0000 (15:20 +0000)]
Merge remote-tracking branch 'asoc/fix/arizona' into asoc-linus

10 years agoMerge remote-tracking branch 'asoc/fix/ab8500' into asoc-linus
Mark Brown [Wed, 20 Nov 2013 15:20:24 +0000 (15:20 +0000)]
Merge remote-tracking branch 'asoc/fix/ab8500' into asoc-linus

10 years agoASoC: arizona: Set FLL to free-run before disabling
Richard Fitzgerald [Wed, 20 Nov 2013 14:37:09 +0000 (14:37 +0000)]
ASoC: arizona: Set FLL to free-run before disabling

The FLL must be placed into free-run mode before disabling
to allow it to entirely shut down.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
10 years agodrm/i915: Fix gen3 self-refresh watermarks
Daniel Vetter [Wed, 20 Nov 2013 14:02:10 +0000 (15:02 +0100)]
drm/i915: Fix gen3 self-refresh watermarks

This regression has been introduced in

commit 4fe8590a921d0b2e36e542dbfa89a8c5993f5a3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Wed Sep 4 18:25:22 2013 +0300

    drm/i915: Use adjusted_mode appropriately when computing watermarks

I guess we should renable the enabled local variable into something a
notch more descriptive, but that's something for -next.

The effect on my i945gme netbook is pretty severe amounts of underruns
- usually the very first pixel gets used for the entire screeen.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
10 years agoALSA: hda - A casual Dell Headset quirk
David Henningsson [Wed, 20 Nov 2013 10:43:30 +0000 (11:43 +0100)]
ALSA: hda - A casual Dell Headset quirk

You're looking at a casual headset patch,
for a specific hardware it will match,
and suddenly, the headset jack will work,
so please apply this simple quirk!

BugLink: https://bugs.launchpad.net/bugs/1253038
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
10 years agodrm/ttm: Remove set_need_resched from the ttm fault handler
Thomas Hellstrom [Thu, 14 Nov 2013 18:49:05 +0000 (10:49 -0800)]
drm/ttm: Remove set_need_resched from the ttm fault handler

Addresses
"[BUG] completely bonkers use of set_need_resched + VM_FAULT_NOPAGE".

In the first occurence it was used to try to be nice while releasing the
mmap_sem and retrying the fault to work around a locking inversion.
The second occurence was never used.

There has been some discussion whether we should change the locking order to
mmap_sem -> bo_reserve. This patch doesn't address that issue, and leaves
that locking order undefined. The solution that we release the mmap_sem if
tryreserve fails and wait for the buffer to become unreserved is something
we want in any case, and follows how the core vm system waits for pages
to be come unlocked while releasing the mmap_sem.

The code also outlines what needs to be changed if we want to establish the
locking order as mmap_sem -> bo::reserve.

One slight issue that remains with this code is that the fault handler might
be prone to starvation if another thread countinously reserves the buffer.
IMO that usage pattern is highly unlikely.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
10 years agodrm/ttm: Don't move non-existing data
Thomas Hellstrom [Mon, 18 Nov 2013 07:30:38 +0000 (23:30 -0800)]
drm/ttm: Don't move non-existing data

If ttm_bo_move_memcpy was instructed to move a non-populated ttm to
io memory, it would first populate the ttm, then move the data and then
destroy the ttm. That's stupid. However, some drivers might have relied on
this to clear io memory from old stuff. So instead of a NOP, which would
be the most efficient, just clear the destination.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
10 years agokvm: mmu: delay mmu audit activation
Sasha Levin [Tue, 19 Nov 2013 20:22:47 +0000 (15:22 -0500)]
kvm: mmu: delay mmu audit activation

We should not be using jump labels before they were initialized. Push back
the callback to until after jump label initialization.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
10 years agoavr32: uapi: be sure of "_UAPI" prefix for all guard macros
Chen Gang [Tue, 12 Nov 2013 08:38:47 +0000 (16:38 +0800)]
avr32: uapi: be sure of "_UAPI" prefix for all guard macros

For all uapi headers, need use "_UAPI" prefix for its guard macro
(which will be stripped by "scripts/headers_installer.sh").

Also remove redundant files (bitsperlong.h, errno.h, fcntl.h, ioctl.h,
ioctls.h, ipcbuf.h, kvm_para.h, mman.h, poll.h, resource.h, siginfo.h,
statfs.h, and unistd.h) which are already in Kbuild.

Also be sure that all "#endif" only have one empty line above, and each
file has guard macro.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
10 years agoavr32: add kprobe_ctlblk memory struct
Eirik Aanonsen [Wed, 6 Nov 2013 21:00:33 +0000 (22:00 +0100)]
avr32: add kprobe_ctlblk memory struct

This re-enables kprobes on AVR32 architecture.

Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
10 years agoavr32: fix out-of-range jump in large kernels
Andreas Bießmann [Thu, 24 Oct 2013 10:31:04 +0000 (12:31 +0200)]
avr32: fix out-of-range jump in large kernels

This patch fixes following error (for big kernels):

---8<---
arch/avr32/boot/u-boot/head.o: In function `no_tag_table':
(.init.text+0x44): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o
arch/avr32/kernel/built-in.o: In function `bad_return':
(.ex.text+0x236): relocation truncated to fit: R_AVR32_22H_PCREL against symbol `panic' defined in .text.unlikely section in kernel/built-in.o
--->8---

It comes up when the kernel increases and 'panic()' is too far away to fit in
the +/- 2MiB range. Which in turn issues from the 21-bit displacement in
'br{cond4}' mnemonic which is one of the two ways to do jumps (rjmp has just
10-bit displacement and therefore a way smaller range). This fact was stated
before in 8d29b7b9f81d6b83d869ff054e6c189d6da73f1f.
One solution to solve this is to add a local storage for the symbol address
and just load the $pc with that value.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: stable@vger.kernel.org
10 years agoavr32: setup crt for early panic()
Andreas Bießmann [Thu, 24 Oct 2013 10:31:03 +0000 (12:31 +0200)]
avr32: setup crt for early panic()

Before the CRT was (fully) set up in kernel_entry (bss cleared before in
_start, but also not before jump to panic() in no_tag_table case).

This patch fixes this up to have a fully working CRT when branching to panic()
in no_tag_table.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: stable@vger.kernel.org
10 years agopercpu-refcount: Add percpu-refcount.o to obj-y
Randy Dunlap [Tue, 19 Nov 2013 18:08:13 +0000 (10:08 -0800)]
percpu-refcount: Add percpu-refcount.o to obj-y

Drop percpu_ida.o from lib-y since it is also listed in obj-y
and it doesn't need to be listed in both places.

Move percpu-refcount.o from lib-y to obj-y to fix build errors
in target_core_mod:

ERROR: "percpu_ref_cancel_init" [drivers/target/target_core_mod.ko] undefined!
ERROR: "percpu_ref_kill_and_confirm" [drivers/target/target_core_mod.ko] undefined!
ERROR: "percpu_ref_init" [drivers/target/target_core_mod.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agoiscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
Nicholas Bellinger [Mon, 18 Nov 2013 18:55:10 +0000 (10:55 -0800)]
iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN

This patch changes iscsit_sequence_cmd() logic to no longer reject
non-immediate CmdSNs that exceed MaxCmdSN with a protocol error,
but instead silently ignore them.

This is done to correctly follow RFC-3720 Section 3.2.2.1:

   For non-immediate commands, the CmdSN field can take any
   value from ExpCmdSN to MaxCmdSN inclusive.  The target MUST silently
   ignore any non-immediate command outside of this range or non-
   immediate duplicates within the range.

Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agoiscsi-target: Convert iscsi_session statistics to atomic_long_t
Nicholas Bellinger [Thu, 14 Nov 2013 02:54:45 +0000 (18:54 -0800)]
iscsi-target: Convert iscsi_session statistics to atomic_long_t

This patch converts a handful of iscsi_session statistics to type
atomic_long_t, instead of using iscsi_session->session_stats_lock
when incrementing these values.

More importantly, go ahead and drop the spinlock usage within
iscsit_setup_scsi_cmd(), iscsit_check_dataout_hdr(),
iscsit_send_datain(), and iscsit_build_rsp_pdu() fast-path code.

(Squash in Roland's  target: Remove write-only stats fields and lock
from struct se_node_acl)

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
10 years agoSquashfs: Check stream is not NULL in decompressor_multi.c
Phillip Lougher [Sun, 10 Nov 2013 00:02:29 +0000 (00:02 +0000)]
Squashfs: Check stream is not NULL in decompressor_multi.c

Fix static checker complaint that stream is not checked in
squashfs_decompressor_destroy().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
10 years agoSquashfs: Directly decompress into the page cache for file data
Phillip Lougher [Wed, 13 Nov 2013 02:04:19 +0000 (02:04 +0000)]
Squashfs: Directly decompress into the page cache for file data

This introduces an implementation of squashfs_readpage_block()
that directly decompresses into the page cache.

This uses the previously added page handler abstraction to push
down the necessary kmap_atomic/kunmap_atomic operations on the
page cache buffers into the decompressors.  This enables
direct copying into the page cache without using the slow
kmap/kunmap calls.

The code detects when multiple threads are racing in
squashfs_readpage() to decompress the same block, and avoids
this regression by falling back to using an intermediate
buffer.

This patch enhances the performance of Squashfs significantly
when multiple processes are accessing the filesystem simultaneously
because it not only reduces memcopying, but it more importantly
eliminates the lock contention on the intermediate buffer.

Using single-thread decompression.

        dd if=file1 of=/dev/null bs=4096 &
        dd if=file2 of=/dev/null bs=4096 &
        dd if=file3 of=/dev/null bs=4096 &
        dd if=file4 of=/dev/null bs=4096

Before:

629145600 bytes (629 MB) copied, 45.8046 s, 13.7 MB/s

After:

629145600 bytes (629 MB) copied, 9.29414 s, 67.7 MB/s

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
10 years agoSquashfs: Restructure squashfs_readpage()
Phillip Lougher [Thu, 31 Oct 2013 19:24:27 +0000 (19:24 +0000)]
Squashfs: Restructure squashfs_readpage()

Restructure squashfs_readpage() splitting it into separate
functions for datablocks, fragments and sparse blocks.

Move the memcpying (from squashfs cache entry) implementation of
squashfs_readpage_block into file_cache.c

This allows different implementations to be supported.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
10 years agoSquashfs: Generalise paging handling in the decompressors
Phillip Lougher [Mon, 18 Nov 2013 02:59:12 +0000 (02:59 +0000)]
Squashfs: Generalise paging handling in the decompressors

Further generalise the decompressors by adding a page handler
abstraction.  This adds helpers to allow the decompressors
to access and process the output buffers in an implementation
independant manner.

This allows different types of output buffer to be passed
to the decompressors, with the implementation specific
aspects handled at decompression time, but without the
knowledge being held in the decompressor wrapper code.

This will allow the decompressors to handle Squashfs
cache buffers, and page cache pages.

This patch adds the abstraction and an implementation for
the caches.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
10 years agoSquashfs: add multi-threaded decompression using percpu variable
Phillip Lougher [Mon, 18 Nov 2013 02:31:36 +0000 (02:31 +0000)]
Squashfs: add multi-threaded decompression using percpu variable

Add a multi-threaded decompression implementation which uses
percpu variables.

Using percpu variables has advantages and disadvantages over
implementations which do not use percpu variables.

Advantages:
  * the nature of percpu variables ensures decompression is
    load-balanced across the multiple cores.
  * simplicity.

Disadvantages: it limits decompression to one thread per core.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
10 years agosquashfs: Enhance parallel I/O
Minchan Kim [Mon, 28 Oct 2013 05:26:30 +0000 (14:26 +0900)]
squashfs: Enhance parallel I/O

Now squashfs have used for only one stream buffer for decompression
so it hurts parallel read performance so this patch supports
multiple decompressor to enhance performance parallel I/O.

Four 1G file dd read on KVM machine which has 2 CPU and 4G memory.

dd if=test/test1.dat of=/dev/null &
dd if=test/test2.dat of=/dev/null &
dd if=test/test3.dat of=/dev/null &
dd if=test/test4.dat of=/dev/null &

old : 1m39s -> new : 9s

* From v1
  * Change comp_strm with decomp_strm - Phillip
  * Change/add comments - Phillip

Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
10 years agoSquashfs: Refactor decompressor interface and code
Phillip Lougher [Wed, 13 Nov 2013 02:56:26 +0000 (02:56 +0000)]
Squashfs: Refactor decompressor interface and code

The decompressor interface and code was written from
the point of view of single-threaded operation.  In doing
so it mixed a lot of single-threaded implementation specific
aspects into the decompressor code and elsewhere which makes it
difficult to seamlessly support multiple different decompressor
implementations.

This patch does the following:

1.  It removes compressor_options parsing from the decompressor
    init() function.  This allows the decompressor init() function
    to be dynamically called to instantiate multiple decompressors,
    without the compressor options needing to be read and parsed each
    time.

2.  It moves threading and all sleeping operations out of the
    decompressors.  In doing so, it makes the decompressors
    non-blocking wrappers which only deal with interfacing with
    the decompressor implementation.

3. It splits decompressor.[ch] into decompressor generic functions
   in decompressor.[ch], and moves the single threaded
   decompressor implementation into decompressor_single.c.

The result of this patch is Squashfs should now be able to
support multiple decompressors by adding new decompressor_xxx.c
files with specialised implementations of the functions in
decompressor_single.c

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reviewed-by: Minchan Kim <minchan@kernel.org>
10 years agoblk-mq: add blktrace insert event trace
Jens Axboe [Wed, 20 Nov 2013 01:59:10 +0000 (18:59 -0700)]
blk-mq: add blktrace insert event trace

We need it to make 'btt' from blktrace happy, otherwise
we are missing one state transition.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
10 years agovirtio-blk: virtqueue_kick() must be ordered with other virtqueue operations
Shaohua Li [Wed, 20 Nov 2013 01:57:24 +0000 (18:57 -0700)]
virtio-blk: virtqueue_kick() must be ordered with other virtqueue operations

It isn't safe to call it without holding the vblk->vq_lock.

Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Shaohua Li <shli@fusionio.com>
Fixed another condition of virtqueue_kick() not holding the lock.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
10 years agoaacraid: prevent invalid pointer dereference
Mahesh Rajashekhara [Thu, 31 Oct 2013 08:31:02 +0000 (14:01 +0530)]
aacraid: prevent invalid pointer dereference

It appears that driver runs into a problem here if fibsize is too small
because we allocate user_srbcmd with fibsize size only but later we
access it until user_srbcmd->sg.count to copy it over to srbcmd.

It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this
structure already includes one sg element and this is not needed for
commands without data.  So, we would recommend to add the following
(instead of test for fibsize == 0).

Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Tue, 19 Nov 2013 23:50:47 +0000 (15:50 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Mostly these are fixes for fallout due to merge window changes, as
  well as cures for problems that have been with us for a much longer
  period of time"

 1) Johannes Berg noticed two major deficiencies in our genetlink
    registration.  Some genetlink protocols we passing in constant
    counts for their ops array rather than something like
    ARRAY_SIZE(ops) or similar.  Also, some genetlink protocols were
    using fixed IDs for their multicast groups.

    We have to retain these fixed IDs to keep existing userland tools
    working, but reserve them so that other multicast groups used by
    other protocols can not possibly conflict.

    In dealing with these two problems, we actually now use less state
    management for genetlink operations and multicast groups.

 2) When configuring interface hardware timestamping, fix several
    drivers that simply do not validate that the hwtstamp_config value
    is one the driver actually supports.  From Ben Hutchings.

 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar.

 4) In dev_forward_skb(), set the skb->protocol in the right order
    relative to skb_scrub_packet().  From Alexei Starovoitov.

 5) Bridge erroneously fails to use the proper wrapper functions to make
    calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid.  Fix from Toshiaki
    Makita.

 6) When detaching a bridge port, make sure to flush all VLAN IDs to
    prevent them from leaking, also from Toshiaki Makita.

 7) Put in a compromise for TCP Small Queues so that deep queued devices
    that delay TX reclaim non-trivially don't have such a performance
    decrease.  One particularly problematic area is 802.11 AMPDU in
    wireless.  From Eric Dumazet.

 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts
    here.  Fix from Eric Dumzaet, reported by Dave Jones.

 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn.

10) When computing mergeable buffer sizes, virtio-net fails to take the
    virtio-net header into account.  From Michael Dalton.

11) Fix seqlock deadlock in ip4_datagram_connect() wrt.  statistic
    bumping, this one has been with us for a while.  From Eric Dumazet.

12) Fix NULL deref in the new TIPC fragmentation handling, from Erik
    Hugne.

13) 6lowpan bit used for traffic classification was wrong, from Jukka
    Rissanen.

14) macvlan has the same issue as normal vlans did wrt.  propagating LRO
    disabling down to the real device, fix it the same way.  From Michal
    Kubecek.

15) CPSW driver needs to soft reset all slaves during suspend, from
    Daniel Mack.

16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet.

17) The xen-netfront RX buffer refill timer isn't properly scheduled on
    partial RX allocation success, from Ma JieYue.

18) When ipv6 ping protocol support was added, the AF_INET6 protocol
    initialization cleanup path on failure was borked a little.  Fix
    from Vlad Yasevich.

19) If a socket disconnects during a read/recvmsg/recvfrom/etc that
    blocks we can do the wrong thing with the msg_name we write back to
    userspace.  From Hannes Frederic Sowa.  There is another fix in the
    works from Hannes which will prevent future problems of this nature.

20) Fix route leak in VTI tunnel transmit, from Fan Du.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  genetlink: make multicast groups const, prevent abuse
  genetlink: pass family to functions using groups
  genetlink: add and use genl_set_err()
  genetlink: remove family pointer from genl_multicast_group
  genetlink: remove genl_unregister_mc_group()
  hsr: don't call genl_unregister_mc_group()
  quota/genetlink: use proper genetlink multicast APIs
  drop_monitor/genetlink: use proper genetlink multicast APIs
  genetlink: only pass array to genl_register_family_with_ops()
  tcp: don't update snd_nxt, when a socket is switched from repair mode
  atm: idt77252: fix dev refcnt leak
  xfrm: Release dst if this dst is improper for vti tunnel
  netlink: fix documentation typo in netlink_set_err()
  be2net: Delete secondary unicast MAC addresses during be_close
  be2net: Fix unconditional enabling of Rx interface options
  net, virtio_net: replace the magic value
  ping: prevent NULL pointer dereference on write to msg_name
  bnx2x: Prevent "timeout waiting for state X"
  bnx2x: prevent CFC attention
  bnx2x: Prevent panic during DMAE timeout
  ...

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Tue, 19 Nov 2013 23:50:03 +0000 (15:50 -0800)]
Merge git://git./linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:
 "Two merge window fallout build fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: merge fix
  sparc64: fix build regession

10 years agoMerge tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 19 Nov 2013 23:49:31 +0000 (15:49 -0800)]
Merge tag 'please-pull-fixia64' of git://git./linux/kernel/git/aegl/linux

Pull ia64 fix from Tony Luck:
 "Unbreak ia64 build by avoiding circular dependency"

* tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  kernel/bounds: avoid circular dependencies in generated headers

10 years agoparisc: size_t is unsigned, so comparison size < 0 doesn't make sense.
Helge Deller [Tue, 12 Nov 2013 20:01:24 +0000 (21:01 +0100)]
parisc: size_t is unsigned, so comparison size < 0 doesn't make sense.

Signed-off-by: Helge Deller <deller@gmx.de>
CC: Mikulas Patocka <mpatocka@redhat.com>
10 years agonfsd4: fix xdr decoding of large non-write compounds
J. Bruce Fields [Tue, 19 Nov 2013 22:32:43 +0000 (17:32 -0500)]
nfsd4: fix xdr decoding of large non-write compounds

This fixes a regression from 247500820ebd02ad87525db5d9b199e5b66f6636
"nfsd4: fix decoding of compounds across page boundaries".  The previous
code was correct: argp->pagelist is initialized in
nfs4svc_deocde_compoundargs to rqstp->rq_arg.pages, and is therefore a
pointer to the page *after* the page we are currently decoding.

The reason that patch nevertheless fixed a problem with decoding
compounds containing write was a bug in the write decoding introduced by
5a80a54d21c96590d013378d8c5f65f879451ab4 "nfsd4: reorganize write
decoding", after which write decoding no longer adhered to the rule that
argp->pagelist point to the next page.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
10 years agoaio: nullify aio->ring_pages after freeing it
Sasha Levin [Tue, 19 Nov 2013 22:33:03 +0000 (17:33 -0500)]
aio: nullify aio->ring_pages after freeing it

After freeing ring_pages we leave it as is causing a dangling pointer. This
has already caused an issue so to help catching any issues in the future
NULL it out.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
10 years agoaio: prevent double free in ioctx_alloc
Sasha Levin [Tue, 19 Nov 2013 22:33:02 +0000 (17:33 -0500)]
aio: prevent double free in ioctx_alloc

ioctx_alloc() calls aio_setup_ring() to allocate a ring. If aio_setup_ring()
fails to do so it would call aio_free_ring() before returning, but
ioctx_alloc() would call aio_free_ring() again causing a double free of
the ring.

This is easily reproducible from userspace.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
10 years agoparisc: improve SIGBUS/SIGSEGV error reporting
Helge Deller [Mon, 18 Nov 2013 21:12:11 +0000 (22:12 +0100)]
parisc: improve SIGBUS/SIGSEGV error reporting

This patch fixes most of the Linux Test Project testcases, e.g. fstat05.

Signed-off-by: Helge Deller <deller@gmx.de>
10 years agoparisc: break out SOCK_NONBLOCK define to own asm header file
Helge Deller [Mon, 14 Oct 2013 19:04:13 +0000 (21:04 +0200)]
parisc: break out SOCK_NONBLOCK define to own asm header file

Break SOCK_NONBLOCK out to its own asm-file as other arches do. This
fixes build errors with auditd and probably other packages.

Signed-off-by: Helge Deller <deller@gmx.de>
10 years agoparisc: do not inline pa_memcpy() internal functions
Helge Deller [Sun, 17 Nov 2013 21:03:11 +0000 (22:03 +0100)]
parisc: do not inline pa_memcpy() internal functions

gcc (4.8.x) creates wrong code when the pa_memcpy() functions are
inlined.  Especially in 32bit builds it calculates wrong return values
if we encounter a fault during execution of the memcpy.

Signed-off-by: Helge Deller <deller@gmx.de>
10 years agoRevert "parisc: implement full version of access_ok()"
Helge Deller [Tue, 19 Nov 2013 22:31:35 +0000 (23:31 +0100)]
Revert "parisc: implement full version of access_ok()"

This reverts commit 63379c135331c724d40a87b98eb62d2122981341.

It broke userspace and adding more checking is not needed.
Even checking if a syscall would access memory in page zero doesn't
makes sense since it may lead to some syscalls returning -EFAULT
where we would return other error codes on other platforms.
In summary, just drop this change and return to always return 1.

Signed-off-by: Helge Deller <deller@gmx.de>
10 years agokernel/bounds: avoid circular dependencies in generated headers
Kirill A. Shutemov [Mon, 18 Nov 2013 08:47:27 +0000 (10:47 +0200)]
kernel/bounds: avoid circular dependencies in generated headers

<linux/spinlock.h> has heavy dependencies on other header files.
It triggers circular dependencies in generated headers on IA64, at
least:

  CC      kernel/bounds.s
In file included from /home/space/kas/git/public/linux/arch/ia64/include/asm/thread_info.h:9:0,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/ia64/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/spinlock.h:50,
                 from kernel/bounds.c:14:
/home/space/kas/git/public/linux/arch/ia64/include/asm/asm-offsets.h:1:35: fatal error: generated/asm-offsets.h: No such file or directory
compilation terminated.

Let's replace <linux/spinlock.h> with <linux/spinlock_types.h>, it's
enough to find out size of spinlock_t.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
10 years agoMerge branch 'genetlink_mcast'
David S. Miller [Tue, 19 Nov 2013 21:39:42 +0000 (16:39 -0500)]
Merge branch 'genetlink_mcast'

Johannes Berg says:

====================
genetlink: clean up multicast group APIs

The generic netlink multicast group registration doesn't have to
be dynamic, and can thus be simplified just like I did with the
ops. This removes some complexity in registration code.

Additionally, two users of generic netlink already use multicast
groups in a wrong way, add workarounds for those two to keep the
userspace API working, but at the same time make them not clash
with other users of multicast groups as might happen now.

While making it all a bit easier, also prevent such abuse by adding
checks to the APIs so each family can only use the groups it owns.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogenetlink: make multicast groups const, prevent abuse
Johannes Berg [Tue, 19 Nov 2013 14:19:39 +0000 (15:19 +0100)]
genetlink: make multicast groups const, prevent abuse

Register generic netlink multicast groups as an array with
the family and give them contiguous group IDs. Then instead
of passing the global group ID to the various functions that
send messages, pass the ID relative to the family - for most
families that's just 0 because the only have one group.

This avoids the list_head and ID in each group, adding a new
field for the mcast group ID offset to the family.

At the same time, this allows us to prevent abusing groups
again like the quota and dropmon code did, since we can now
check that a family only uses a group it owns.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogenetlink: pass family to functions using groups
Johannes Berg [Tue, 19 Nov 2013 14:19:38 +0000 (15:19 +0100)]
genetlink: pass family to functions using groups

This doesn't really change anything, but prepares for the
next patch that will change the APIs to pass the group ID
within the family, rather than the global group ID.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogenetlink: add and use genl_set_err()
Johannes Berg [Tue, 19 Nov 2013 14:19:37 +0000 (15:19 +0100)]
genetlink: add and use genl_set_err()

Add a static inline to generic netlink to wrap netlink_set_err()
to make it easier to use here - use it in openvswitch (the only
generic netlink user of netlink_set_err()).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogenetlink: remove family pointer from genl_multicast_group
Johannes Berg [Tue, 19 Nov 2013 14:19:36 +0000 (15:19 +0100)]
genetlink: remove family pointer from genl_multicast_group

There's no reason to have the family pointer there since it
can just be passed internally where needed, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogenetlink: remove genl_unregister_mc_group()
Johannes Berg [Tue, 19 Nov 2013 14:19:35 +0000 (15:19 +0100)]
genetlink: remove genl_unregister_mc_group()

There are no users of this API remaining, and we'll soon
change group registration to be static (like ops are now)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agohsr: don't call genl_unregister_mc_group()
Johannes Berg [Tue, 19 Nov 2013 14:19:34 +0000 (15:19 +0100)]
hsr: don't call genl_unregister_mc_group()

There's no need to unregister the multicast group if the
generic netlink family is registered immediately after.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoquota/genetlink: use proper genetlink multicast APIs
Johannes Berg [Tue, 19 Nov 2013 14:19:33 +0000 (15:19 +0100)]
quota/genetlink: use proper genetlink multicast APIs

The quota code is abusing the genetlink API and is using
its family ID as the multicast group ID, which is invalid
and may belong to somebody else (and likely will.)

Make the quota code use the correct API, but since this
is already used as-is by userspace, reserve a family ID
for this code and also reserve that group ID to not break
userspace assumptions.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agodrop_monitor/genetlink: use proper genetlink multicast APIs
Johannes Berg [Tue, 19 Nov 2013 14:19:32 +0000 (15:19 +0100)]
drop_monitor/genetlink: use proper genetlink multicast APIs

The drop monitor code is abusing the genetlink API and is
statically using the generic netlink multicast group 1, even
if that group belongs to somebody else (which it invariably
will, since it's not reserved.)

Make the drop monitor code use the proper APIs to reserve a
group ID, but also reserve the group id 1 in generic netlink
code to preserve the userspace API. Since drop monitor can
be a module, don't clear the bit for it on unregistration.

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogenetlink: only pass array to genl_register_family_with_ops()
Johannes Berg [Tue, 19 Nov 2013 14:19:31 +0000 (15:19 +0100)]
genetlink: only pass array to genl_register_family_with_ops()

As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotcp: don't update snd_nxt, when a socket is switched from repair mode
Andrey Vagin [Tue, 19 Nov 2013 18:10:06 +0000 (22:10 +0400)]
tcp: don't update snd_nxt, when a socket is switched from repair mode

snd_nxt must be updated synchronously with sk_send_head.  Otherwise
tp->packets_out may be updated incorrectly, what may bring a kernel panic.

Here is a kernel panic from my host.
[  103.043194] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[  103.044025] IP: [<ffffffff815aaaaf>] tcp_rearm_rto+0xcf/0x150
...
[  146.301158] Call Trace:
[  146.301158]  [<ffffffff815ab7f0>] tcp_ack+0xcc0/0x12c0

Before this panic a tcp socket was restored. This socket had sent and
unsent data in the write queue. Sent data was restored in repair mode,
then the socket was switched from reapair mode and unsent data was
restored. After that the socket was switched back into repair mode.

In that moment we had a socket where write queue looks like this:
snd_una    snd_nxt   write_seq
   |_________|________|
             |
  sk_send_head

After a second switching from repair mode the state of socket was
changed:

snd_una          snd_nxt, write_seq
   |_________ ________|
             |
  sk_send_head

This state is inconsistent, because snd_nxt and sk_send_head are not
synchronized.

Bellow you can find a call trace, how packets_out can be incremented
twice for one skb, if snd_nxt and sk_send_head are not synchronized.
In this case packets_out will be always positive, even when
sk_write_queue is empty.

tcp_write_wakeup
skb = tcp_send_head(sk);
tcp_fragment
if (!before(tp->snd_nxt, TCP_SKB_CB(buff)->end_seq))
tcp_adjust_pcount(sk, skb, diff);
tcp_event_new_data_sent
tp->packets_out += tcp_skb_pcount(skb);

I think update of snd_nxt isn't required, when a socket is switched from
repair mode.  Because it's initialized in tcp_connect_init. Then when a
write queue is restored, snd_nxt is incremented in tcp_event_new_data_sent,
so it's always is in consistent state.

I have checked, that the bug is not reproduced with this patch and
all tests about restoring tcp connections work fine.

Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agodrm/radeon: hook up backlight functions for CI and KV family.
Samuel Li [Tue, 19 Nov 2013 20:04:45 +0000 (15:04 -0500)]
drm/radeon: hook up backlight functions for CI and KV family.

Fixes crashes when handling atif events due to the lack of a
callback being registered.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
10 years agoatm: idt77252: fix dev refcnt leak
Ying Xue [Tue, 19 Nov 2013 10:09:27 +0000 (18:09 +0800)]
atm: idt77252: fix dev refcnt leak

init_card() calls dev_get_by_name() to get a network deceive. But it
doesn't decrease network device reference count after the device is
used.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoxfrm: Release dst if this dst is improper for vti tunnel
fan.du [Tue, 19 Nov 2013 08:53:28 +0000 (16:53 +0800)]
xfrm: Release dst if this dst is improper for vti tunnel

After searching rt by the vti tunnel dst/src parameter,
if this rt has neither attached to any transformation
nor the transformation is not tunnel oriented, this rt
should be released back to ip layer.

otherwise causing dst memory leakage.

Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'acpi-hotplug'
Rafael J. Wysocki [Tue, 19 Nov 2013 20:18:13 +0000 (21:18 +0100)]
Merge branch 'acpi-hotplug'

* acpi-hotplug:
  PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration

10 years agoPCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
Mika Westerberg [Tue, 19 Nov 2013 14:15:35 +0000 (16:15 +0200)]
PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration

Commit bd950799d951 (PCI: acpiphp: Convert to dynamic debug) removed users
of acpiphp_debug variable and the variable itself but the declaration was
left in the header file. Drop this unused declaration.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
10 years agonetlink: fix documentation typo in netlink_set_err()
Johannes Berg [Tue, 19 Nov 2013 09:35:40 +0000 (10:35 +0100)]
netlink: fix documentation typo in netlink_set_err()

The parameter is just 'group', not 'groups', fix the documentation typo.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>