Ovidiu Panait [Mon, 17 Aug 2020 18:27:51 +0000 (21:27 +0300)]
sandbox: u-boot.lds: Remove bogus __bss_start symbol
The sections described in the sandbox linker script are inserted before
data section via "INSERT BEFORE .data;". Running readelf -S on sandbox
u-boot binary shows that the bss section is located after the data
section:
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[25] .u_boot_list PROGBITS
000000000041d1c8 0021d1c8
000000000000dd90 0000000000000000 WA 0 0 8
[26] _u_boot_sandbox_g PROGBITS
000000000042af58 0022af58
00000000000000a0 0000000000000000 WA 0 0 8
[27] .data PROGBITS
000000000042b000 0022b000
000000000000f708 0000000000000000 WA 0 0 32
[28] .bss NOBITS
000000000043a720 0023a708
0000000000018930 0000000000000000 WA 0 0 32
This means that the __bss_start assignment in the linker script is bogus,
as the actual bss section start is located elsewhere. Remove this
assignment, as the __bss_start symbol is not used on sandbox anyway.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Ovidiu Panait [Mon, 17 Aug 2020 18:27:50 +0000 (21:27 +0300)]
board_f: Remove dead code from init_func_i2c
Since commit
69153988a6f4 ("i2c: Finish dropping use of CONFIG_I2C_HARD")
init_func_i2c is wrapped only by "#if defined(CONFIG_SYS_I2C)". Because
of this, the second ifdef within becomes pointless:
#if defined(CONFIG_SYS_I2C)
static int init_func_i2c(void)
<snip>
#ifdef CONFIG_SYS_I2C
...
#else
...
#endif
<snip>
}
#endif
Remove the dead #else preprocessor code.
Fixes:
69153988a6f ("i2c: Finish dropping use of CONFIG_I2C_HARD")
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Simon Glass [Wed, 5 Aug 2020 19:27:49 +0000 (13:27 -0600)]
binman: Add a setup script for Python
Allow binman to be installed by adding a suitable setup.py script.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 5 Aug 2020 19:27:48 +0000 (13:27 -0600)]
dtoc: Add a setup script for Python
Allow dtoc to be installed by adding a suitable setup.py script.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 5 Aug 2020 19:27:47 +0000 (13:27 -0600)]
binman: Correct some import statements
Some of these were not converted when binman moved to use absolute paths.
Fix them.
Also drop the import of 'test' which is a directory, not a module.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 5 Aug 2020 19:27:46 +0000 (13:27 -0600)]
binman: Move GetEntryModules() to control
When binman is installed its main program is in a different directory
to its modules. This means that __file__ is different and we cannot use
it to obtain the path to etype/ from main.py
To fix this, move the function to the 'control' module, since it is
installed with all the other modules, including the etype/ directory.
Signed-off-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Tue, 4 Aug 2020 05:14:43 +0000 (14:14 +0900)]
treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.
To help this tedious work, this commit converts devfdt_get_addr_ptr()
to dev_read_addr_ptr() by coccinelle. I also removed redundant casts
because dev_read_addr_ptr() returns an opaque pointer.
To generate this commit, I ran the following semantic patch
excluding include/dm/.
<smpl>
@@
type T;
expression dev;
@@
-(T *)devfdt_get_addr_ptr(dev)
+dev_read_addr_ptr(dev)
@@
expression dev;
@@
-devfdt_get_addr_ptr(dev)
+dev_read_addr_ptr(dev)
</smpl>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Masahiro Yamada [Tue, 4 Aug 2020 05:14:42 +0000 (14:14 +0900)]
ata: mvebu: use dev_read_addr() to get base address
It is strange to use devfdt_get_addr_ptr(), then cast the pointer
back to ulong because you could use devfdt_get_addr() without casting.
Convert it to dev_read_addr(), which is capable to CONFIG_OF_LIVE.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Masahiro Yamada [Tue, 4 Aug 2020 05:14:41 +0000 (14:14 +0900)]
gpio: at91: use dev_read_addr() to get base address
It is strange to use devfdt_get_addr_ptr(), then cast the pointer
back to uint32 because you could use devfdt_get_addr() without casting.
Convert it to dev_read_addr(), which is capable to CONFIG_OF_LIVE.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ovidiu Panait [Mon, 3 Aug 2020 19:17:36 +0000 (22:17 +0300)]
test: dm: Add test case for devfdt_get_addr_ptr
Add flat tree test case to cover devfdt_get_addr_ptr function.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ovidiu Panait [Mon, 3 Aug 2020 19:17:35 +0000 (22:17 +0300)]
dm: core: Fix devfdt_get_addr_ptr return value
According to the description of devfdt_get_addr_ptr, this function should
return NULL on failure, but currently it returns (void *)FDT_ADDR_T_NONE.
Fix this by making devfdt_get_addr_ptr return NULL on failure, as
described in the function comments. Also, update the drivers currently
checking (void *)FDT_ADDR_T_NONE to check for NULL.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrice Chotard [Tue, 28 Jul 2020 07:13:35 +0000 (09:13 +0200)]
doc: add bind/unbind command documentation
Add documentation in doc/drivel-model for the bind/unbind command.
Part of this documentation is extracted from original patch commit
message:
commit
49c752c93a78 ("cmd: Add bind/unbind commands to bind a device to a driver from the command line")
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrice Chotard [Tue, 28 Jul 2020 07:13:34 +0000 (09:13 +0200)]
test/py: Update test_bind
As bind-test is now binded at sandbox startup and no more by
test_bind.py, bind-test nodes are not located at the end of
"dm tree" output, but can be located everywhere in the tree, so
bind-test output could either be:
simple_bus 0 [ ] generic_simple_bus |-- bind-test
phy 0 [ ] phy_sandbox | |-- bind-test-child1
simple_bus 1 [ ] generic_simple_bus | `-- bind-test-child2
or:
simple_bus 5 [ ] generic_simple_bus `-- bind-test
phy 2 [ ] phy_sandbox |-- bind-test-child1
simple_bus 6 [ ] generic_simple_bus `-- bind-test-child2
in_tree() function need to be updated to take care of that change.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrice Chotard [Tue, 28 Jul 2020 07:13:33 +0000 (09:13 +0200)]
sandbox: dts: Add compatible string for bind-test node
Usage of lists_bind_fdt() in bind command imposes to add
a compatible string for bind-test node.
Others impacts are:
- bind-test node is binded at sandbox start, so no need to bind it
in test_bind_unbind_with_node() test.
- As explained just above, after sandbox start, now a phy exist.
In test/dm/phy.c, it was verified that a third phy didn't exist,
now we must verified that a fourth phy doesn't exist.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrice Chotard [Tue, 28 Jul 2020 07:13:32 +0000 (09:13 +0200)]
sandbox: phy: add driver_data for bind test cmd
Add driver data to existing compatible string "sandbox,phy".
Add an additional compatible string without driver_data
This will verify that bind command parses, finds and passes the
correct driver data to device_bind_with_driver_data() by using
driver_data in the second sandbox_phy_ids table entry.
In sandbox_phy_bind() a check is added to validate driver_data
content.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrice Chotard [Tue, 28 Jul 2020 07:13:31 +0000 (09:13 +0200)]
cmd: bind: allow to bind driver with driver data
Initial implementation invokes device_bind_with_driver_data()
with driver_data parameter equal to 0.
For driver with driver data, the bind command can't bind
correctly this driver or even worse causes data abort as shown below:
As example, for debug purpose on STM32MP1 platform, ethernet
(dwc_eth_qos.c) driver needed to be unbinded/binded.
This driver is using driver data:
static const struct udevice_id eqos_ids[] = {
{
.compatible = "nvidia,tegra186-eqos",
.data = (ulong)&eqos_tegra186_config
},
{
.compatible = "snps,dwmac-4.20a",
.data = (ulong)&eqos_stm32_config
},
{ }
};
After unbinding/binding this driver and probing it (with the dhcp command),
we got a prefetch abort as below:
STM32MP> unbind eth ethernet@
5800a000
STM32MP> bind /soc/ethernet@
5800a000 eth_eqos
STM32MP> dhcp
prefetch abort
pc : [<
4310801c>] lr : [<
ffc8f4ad>]
reloc pc : [<
035ba01c>] lr : [<
c01414ad>]
sp :
fdaf19b0 ip :
ffcea83c fp :
00000001
r10:
ffcfd4a0 r9 :
fdaffed0 r8 :
00000000
r7 :
ffcff304 r6 :
fdc63220 r5 :
00000000 r4 :
fdc5b108
r3 :
43108020 r2 :
00003d39 r1 :
ffcea544 r0 :
fdc63220
Flags: nZCv IRQs off FIQs off Mode SVC_32
Code: data abort
pc : [<
ffc4f9c0>] lr : [<
ffc4f9ad>]
reloc pc : [<
c01019c0>] lr : [<
c01019ad>]
sp :
fdaf18b8 ip :
00000000 fp :
00000001
r10:
ffcd69b2 r9 :
fdaffed0 r8 :
ffcd69aa
r7 :
00000000 r6 :
00000008 r5 :
4310801c r4 :
fffffffc
r3 :
00000001 r2 :
00000028 r1 :
00000000 r0 :
00000006
Flags: NzCv IRQs on FIQs on Mode SVC_32 (T)
Code: 2f00 d1e9 2c00 dce9 (f855) 2024
Resetting CPU ...
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Sat, 25 Jul 2020 19:38:49 +0000 (21:38 +0200)]
dm: fix ofnode_read_addr/size_cells()
In the case of the live tree ofnode_read_addr_cells() and
ofnode_read_size_cells() return the #address-cells and #size-cells defined
in the parent node. With the patch the same is done for a non-live tree.
The only consumer of these functions is currently the CFI flash driver.
This patch fixes the incorrect parsing of the device tree leading to
'saveenv' failing on qemu_arm64_defconfig.
For testing qemu-system-aarch64 has to be called with
-drive if=pflash,format=raw,index=1,file=envstore.img
to provide the flash memory. envstore.img must be 64 MiB large.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
Tom Rini [Thu, 20 Aug 2020 18:46:43 +0000 (14:46 -0400)]
Merge tag 'xilinx-for-v2020.10-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2020.10-rc3
- Fix fdtfile variable setup
- Fix bootm_*/fdt_high/initrd_high variables handling
- Fix Kconfig dependencies for Xilinx drivers
- Fix booting u-boot from lowest memory
- Fix firmware payload argument count for Versal
- Fix dfu configurations
- Fix mio_bank property handling
- Fix and align code around ID detection
- Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG
- Simplify logic around reading MAC from eeprom
- Decrease malloc length for zynqmp mini qspi
- Enable preboot for ZynqMP and Versal
i2c:
- Fix i2c eeprom partitions handling
mmc:
- Fix logic around HS mode enabling and use proper functions
Tom Rini [Thu, 20 Aug 2020 12:38:10 +0000 (08:38 -0400)]
Merge branch '2020-08-19-mediatek-updates'
- Assorted updates for MediaTek platforms
Michal Simek [Thu, 23 Jul 2020 07:24:06 +0000 (09:24 +0200)]
clk: versal: Move pm_query_id out of clock driver
There is no reason to have firmware specific structure in clock driver.
Move it to generic location and also initialize enum values which is based
on https://lore.kernel.org/linux-arm-kernel/
20200318125003.GA2727094@kroah.com/
recommended way to go to make sure that values guaranteed by compiler.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 29 Jul 2020 13:42:26 +0000 (15:42 +0200)]
mmc: sdhci: Use upper/lower_32_bits macros
Instead of recasting and shifting use macros which are designed for taking
upper/lower 32bit value from 64bit variable.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Faiz Abbas [Thu, 23 Jul 2020 04:12:19 +0000 (09:42 +0530)]
mmc: sdhci: Enable high speed conditional on the corresponding bit
The capabilities register has a field to indicate whether the host
supports high speed mode or not. Add high speed host_caps based on
this bit instead of enabling it by default.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Reviewed-by: Michal Simek <michal.simek@xilnx.com>
Tested-by: Michal Simek <michal.simek@xilnx.com>
(zcu104 with sdhci-caps-mask = <0 0x200000>;)
Michal Simek [Wed, 12 Aug 2020 10:17:53 +0000 (12:17 +0200)]
xilinx: common: Change bootm_size variable setting
Linux kernel for arm32 requires dtb and initrd to be placed in low memory
to work properly. This requirement is described in chapter 4b) and 5) in
Linux documentation (Documentation/arm/booting.rst).
There is an issue on arm32 with 2GB of memory that bootm_size is bigger
than Linux lowmem (for example with VMSPLIT_3G). That's why limit bootm
size on these systems not to be above 768MB.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 12 Aug 2020 10:16:49 +0000 (12:16 +0200)]
xilinx: common: Check return value from variable setup
env_set..() can failed that's why check return status and report it back to
make sure that user is aware that's something went wrong.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 12 Aug 2020 10:11:06 +0000 (12:11 +0200)]
xilinx: common: Get rid of initrd_high variable setup
When bootm_low/bootm_size are setup properly there is no need to setup any
initrd_high address. Location for initrd is determined through LMB.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 12 Aug 2020 10:04:50 +0000 (12:04 +0200)]
xilinx: common: Get rid of fdt_high variable
There is no need to setup this variable if bootm_low and bootm_size
variable are properly setup. If fdt_high variable is missing U-Boot is
asking LMB to return free memory which is not used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 3 Aug 2020 10:59:28 +0000 (12:59 +0200)]
xilinx: Change logic around zynq_board_read_rom_ethaddr()
There is no reason to build private function when
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET is not defined. There is already weak
function which handles default case properly.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 28 Jul 2020 10:45:47 +0000 (12:45 +0200)]
xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIG
Start to use ENV_VARS_UBOOT_RUNTIME_CONFIG to enable/disable updating
variables with run time information.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 3 Aug 2020 13:14:24 +0000 (15:14 +0200)]
xilinx: versal: Enable i2c misc eeprom driver
Enable this driver to be able to work with i2c based eeproms on Versal.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:32 +0000 (23:17 +0100)]
xilinx: zynqmp: fix incorrect map not align with IPI HW
Current IPI module register description is not align with IPI HW. The
registers with the wrong offset are not used so it does not cause real
issues. This patch aligns the register description.
Additionally comments added to explain why recv function does not check
any flag prior copying rx data.
Fixes:
660b0c77d816 ("mailbox: zynqmp: ipi mailbox driver")
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:30 +0000 (23:17 +0100)]
xilinx: zynqmp: remove chip_id function
Remove chip_id function and integrate the firmware call in the
zynqmp_get_silicon_idcode_name function. The change avoids querying the
firmware twice and makes the code bit more clear.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:29 +0000 (23:17 +0100)]
xilinx: zynqmp: get chip ID at EL3
Modify the board init function to allow getting the chip ID when U-Boot
proper is executed at EL3.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:28 +0000 (23:17 +0100)]
xilinx: zynqmp: get chip ID using firmware driver
Current implementation for getting chip ID uses either raw access on EL3
or a SMC call to get the silicon information. Following change
simplifies the code using always the firmware driver.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:27 +0000 (23:17 +0100)]
xilinx: zynqmp: merge firmware calls for EL2 and EL3
This patch merges ZynqMP firmware calls under xilinx_pm_request in order
to make trainsparent the EL. Calls at EL3 are send through IPI messages
and EL2 through SMC calls.
The EL2 call uses fixed payload and arg size as the EL3 call. The
firmware is capable to handle PMUFW_PAYLOAD_ARG_CNT bytes but the
firmware API is limited by the SMC call size.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:26 +0000 (23:17 +0100)]
xilinx: zynqmp: synchronize firmware call return payload
Removes duplicated definition of PAYLOAD_ARG_CNT and define it in the
firmware driver. Additionally fixes payload buffer declarations without
macro usage
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 22 Jul 2020 15:46:31 +0000 (17:46 +0200)]
mmc: zynq: Fix default value for xlnx,mio-bank
DT binding is saying that default value is 0 not -1 that's why fix it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Michal Simek [Wed, 22 Jul 2020 15:42:43 +0000 (17:42 +0200)]
xilinx: Fix xlnx,mio_bank property
s/xlnx,mio_bank/xlnx,mio-bank/g
DT binding is describing mio-bank not mio_bank that's why fix all DTSes and
also driver itself.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Michal Simek [Thu, 28 May 2020 09:48:55 +0000 (11:48 +0200)]
i2c: eeprom: Use reg property instead of offset and size
Remove adhoc dt binding for fixed-partition definition for i2c eeprom.
fixed-partition are using reg property instead of offset/size pair.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Wed, 15 Jul 2020 12:20:34 +0000 (14:20 +0200)]
xilinx: zynqmp: Enable DFU tftp support
Enable DFU tftp support for firmware update. Fill dfu_ram_tftp variable to
have command present for showing how to use it.
boot FIT image has been created from below fragment. Key part is that type
of image has to be firmware. Also based on experiment load property is
completely ignored and base addresses are taken from dfu_alt_info variable.
$ cat update_uboot.its
/dts-v1/;
/ {
description = "Automatic U-Boot update";
#address-cells = <1>;
images {
Image {
description = "Kernel";
data = /incbin/("/tftpboot/Image");
compression = "none";
arch = "arm64";
type = "firmware";
os = "linux";
load = <0x80000>;
entry = <0x80000>;
hash-1 {
algo = "sha1";
};
};
system.dtb {
description = "DTB";
data = /incbin/("/tftpboot/system.dtb");
compression = "none";
arch = "arm64";
type = "firmware";
load = <0>;
hash-1 {
algo = "sha1";
};
};
};
};
$ mkimage -f update_uboot.its /tftpboot/boot
When U-Boot starts get IP address and server IP.
dhcp
setenv serverip 192.168.0.105
And then run prepared command.
run dfu_ram_tftp
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 15 Jul 2020 13:43:52 +0000 (15:43 +0200)]
xilinx: Align dfu ram with booti command
Image should be loaded to 0x80000 address and not to $kernel_addr_r.
Also kernel_addr, fdt_addr and fdt_size in zynqmp case are not defined
that's why define it to be aligned with Versal.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ashok Reddy Soma [Mon, 6 Apr 2020 13:58:32 +0000 (07:58 -0600)]
arm64: zynqmp: Reduce malloc memory for mini QSPI configuration
Mini U-boot runs on lower foot print of 256KB OCM. Hence 8K memory
for malloc may not be required. Reduce it by 1.5K.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 10 Jul 2020 10:42:09 +0000 (12:42 +0200)]
xilinx: versal: Use lowest memory for U-Boot
Find and use the lowest memory for Versal to make sure that we keep u-boot
as low as possible and never use memory above u-boot's maximum VA mapping.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 10 Jul 2020 11:34:44 +0000 (13:34 +0200)]
lib: fdt: Convert fdtdes_setup_mem..() to livetree API
Convert fdtdec_setup_mem_size_base(), get_next_memory_node(),
fdtdec_setup_memory_banksize() and fdtdec_setup_mem_size_base_lowest() to
livetree API.
Tested on ZynqMP zcu104 board.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Thu, 9 Jul 2020 12:09:52 +0000 (14:09 +0200)]
lib: fdt: Introduce fdtdec_setup_mem_size_base_lowest()
New function should be called from board dram_init() because it initialized
gd->ram_base/ram_size. It finds the lowest available memory.
On systems with multiple memory nodes finding out the first memory node by
fdtdec_setup_mem_size_base() is not enough because this memory can be above
actual U-Boot VA mapping. Currently only mapping till 39bit is supported
(Full 44bit mapping was removed by commit
7985cdf74b28 ("arm64: Remove
non-full-va map code")).
If DT starts with the first memory node above 39bit address then system can
be unpredictable.
The function is available only when multiple memory bank support is
enabled.
Calling fdtdec_setup_memory_banksize() from dram_init() is not possible
because fdtdec_setup_memory_banksize() is saving dram information to bd
structure which is placed on stack but not initialized at this time. Also
stack is placed at location setup in dram_init().
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ibai Erkiaga [Wed, 1 Jul 2020 23:10:58 +0000 (00:10 +0100)]
versal: fix versal PM ret payload size
The PM return payload size is defined as 4 bytes for Versal arquitecture
while the PM calls implemented both in the Versal clock driver and
ZynqMP firmware driver expects 5 bytes length.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
T Karthik Reddy [Wed, 24 Jun 2020 09:23:57 +0000 (03:23 -0600)]
xilinx: versal: Add new versal loadpdi command
Versal loadpdi command is used for loading secure & non-secure
pdi images.
Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Igor Lantsman [Wed, 24 Jun 2020 12:33:46 +0000 (14:33 +0200)]
arm64: zynqmp: Fix set_fdtfile() not to break u-boots DTB
Origin function was calling strsep which replaced delimiter ',' by a null
byte ('\0'). Operation was done directly on FDT which ends up with the
following behavior:
ZynqMP> printenv fdtfile
fdtfile=xilinx/zynqmp.dtb
ZynqMP> fdt addr $fdtcontroladdr
ZynqMP> fdt print / compatible
compatible = "xlnx", "zynqmp"
As is visible fdtfile was correctly composed but a null byte caused that
xlnx was separated from zynqmp.
This hasn't been spotted because in all Xilinx DTs there are at least 3
compatible string and only the first one was affected by this issue.
But for systems which only had one compatible string "xlnx,zynqmp" it was
causing an issue when U-Boot's DT was used by Linux kernel.
The patch removes strsep calling and strchr is called instead which just
locate the first char after deliminator ',' (variable called "name").
And using this pointer in fdtfile composing.
Fixes:
91d7e0c47f51 ("arm64: zynqmp: Create fdtfile from compatible string")
Reported-by: Igor Lantsman <igor.lantsman@opsys-tech.com>
Signed-off-by: Igor Lantsman <igor.lantsman@opsys-tech.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Tue, 18 Aug 2020 12:15:01 +0000 (14:15 +0200)]
xilinx: Enable preboot feature for ZynqMP and Versal
Enable preboot functionality for ZynqMP and Versal platforms.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Thu, 6 Aug 2020 13:18:36 +0000 (15:18 +0200)]
xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers
Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in
PL and vice versa. That's why change dependencies and do not limit enabling
just for some platforms.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Michal Simek [Thu, 9 Jul 2020 13:57:56 +0000 (15:57 +0200)]
xilinx: Setup bootm variables
On system with PL DDR which is placed before PS DDR in DT
env_get_bootm_size() and env_get_bootm_low() without specifying bootm_low
and bootm_size variables are taking by default gd->bd->bi_dram[0].start and
gd->bd->bi_dram[0].size. As you see 0 means bank 0 which doesn't need to be
PS ddr and even can be memory above 39bit VA which is what U-Boot supports
now.
That's why setup bootm variables based on ram_base/ram_size setting to make
sure that boot images are placed to the same location as U-Boot is placed.
This location should be by default location where OS can boot from.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Frank Wunderlich [Thu, 13 Aug 2020 08:20:48 +0000 (10:20 +0200)]
dts: r64: add sata- and asm_sel nodes
asm_sel is for switching between sata and pcie mode
on r64 there is GPIO90 connected to ASM1480 which
switches RX/TX pairs to PCIe/SATA connector
output-low means sata-controller is active
with 2020-10 now reg is also needed for the phy itself
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Thu, 13 Aug 2020 08:20:47 +0000 (10:20 +0200)]
ahci: mediatek: add ahci driver
add AHCI driver ported from linux
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/ahci_mtk.c
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Thu, 13 Aug 2020 08:20:46 +0000 (10:20 +0200)]
reset: add basic reset controller for pciesys
bind reset controller to pciesys
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Thu, 13 Aug 2020 08:20:45 +0000 (10:20 +0200)]
phy: mtk-tphy: add PHY_TYPE_SATA
add support for PHY_TYPE_SATA to Mediateks TPHY driver
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Frank Wunderlich [Thu, 13 Aug 2020 08:20:44 +0000 (10:20 +0200)]
arm: dts: mt7622: add SATA reset constants
add reset constants used for SATA to header file
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Fri, 14 Aug 2020 07:10:17 +0000 (09:10 +0200)]
arm: dts: mt7622: add PCIe nodes for BananaPi-R64
this patch adds PCIe-Nodes for BananaPi R64
original nodes from Chuanjia Liu for mt7622-rfb
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Mon, 10 Aug 2020 14:45:46 +0000 (16:45 +0200)]
dts: r64: add r64 dts
add a separate DTS for BananaPi R64 because it has 1GB RAM and SATA-Support
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Frank Wunderlich [Mon, 10 Aug 2020 14:45:45 +0000 (16:45 +0200)]
arm: dts: add watchdog-node for mt7622
adding a watchdog-node to mt7622 dtsi
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Chuanjia Liu [Mon, 10 Aug 2020 08:17:12 +0000 (16:17 +0800)]
configs: mt7622: add PCIe controller related configs
Add PCIe command and related configs
Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Chuanjia Liu [Mon, 10 Aug 2020 08:17:11 +0000 (16:17 +0800)]
arm: dts: mediatek: add PCIe node for MT7622
This patch adds PCIe node in dts for Mediatek MT7622 Soc.
Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Chuanjia Liu [Mon, 10 Aug 2020 08:17:10 +0000 (16:17 +0800)]
PCI: mediatek: Add PCIe support for MT7622
This patch adds PCIe support for the Mediatek MT7622 SOC.
Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Chuanjia Liu [Mon, 10 Aug 2020 08:17:09 +0000 (16:17 +0800)]
arm: dts: mediatek: add pciesys support for MT7622 SoC
This patch adds pciesys support in dts for MediaTek MT7622 SoC.
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Chuanjia Liu [Mon, 10 Aug 2020 08:17:08 +0000 (16:17 +0800)]
clk: mediatek: add pciesys support for MT7622 SoC
This patch adds pciesys support in clock driver for
MediaTek MT7622 SoC.
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Signed-off-by: Chuanjia Liu <Chuanjia.Liu@mediatek.com>
Chunfeng Yun [Fri, 7 Aug 2020 09:32:03 +0000 (17:32 +0800)]
pinctrl: mediatek: mt8512: fix the wrong start address of ranges
The start address of dout, pullen and pullsel ragnes are wrong,
so fix up them.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tom Rini [Wed, 19 Aug 2020 01:28:49 +0000 (21:28 -0400)]
Merge tag 'uniphier-v2020.10-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier
UniPhier SoC updates for v2020.10 (2nd)
- minor code cleanups
- sync DT with Linux
Masahiro Yamada [Tue, 4 Aug 2020 05:41:09 +0000 (14:41 +0900)]
ARM: dts: uniphier: resync DT with Linux 5.9-rc1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 30 Jul 2020 09:28:08 +0000 (18:28 +0900)]
ARM: uniphier: use FIELD_GET() to get access to revision register fields
Define register fields as macros, and use FIELD_GET().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 30 Jul 2020 09:28:07 +0000 (18:28 +0900)]
serial: uniphier: fix typo in comment
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 30 Jul 2020 09:28:06 +0000 (18:28 +0900)]
ARM: uniphier: remove unneeded header inclusion from board_late_init.c
<nand.h> is unneeded since commit
9248a78f40d6 ("ARM: UniPhier: remove
Denali NAND controller fixup code").
<linux/io.h> is uneeded since commit
1320fa2e55d2 ("ARM: uniphier:
remove workaround for the NAND write protect").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 30 Jul 2020 09:28:05 +0000 (18:28 +0900)]
ARM: uniphier: remove unused uniphier_pin_init()
This function is unused since commit
862274913f8f ("bus:
uniphier-system-bus: move hardware init from board files").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 30 Jul 2020 09:28:04 +0000 (18:28 +0900)]
ARM: uniphier: rename include guard of include/configs/uniphier.h
Make the include guard match to the file name.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tom Rini [Sat, 15 Aug 2020 13:01:01 +0000 (09:01 -0400)]
Merge tag 'efi-2020-10-rc3-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for efi-2020-10-rc3 (2)
This series includes bug fixes for:
* UEFI secure boot - images with multiple signatures
* UEFI secure boot - support for intermediate certificates
* corrections for UEFI unit tests
* missing loadaddr on MAIX board
Tom Rini [Fri, 14 Aug 2020 19:48:56 +0000 (15:48 -0400)]
Merge branch '2020-08-14-assorted-updates'
- Xen guest and some paravirt driver support.
- Aspeed SoC updates
- Broadcom IPROC PCIe RC driver
Michal Simek [Thu, 13 Aug 2020 08:12:21 +0000 (10:12 +0200)]
cmd: demo: Remove duplicated help message for list subcommand
There is no need to show demo list description twice when help demo is
performed. The patch removes duplicated entry.
Current state:
=> help demo
demo - Driver model (dm) demo operations
Usage:
demo list List available demo devices
demo hello <num> [<char>] Say hello
demo light [<num>] Set or get the lights
demo status <num> Get demo device status
demo list List available demo devices
Fixes:
a02af4aeece4 ("dm: demo: Add a simple GPIO demonstration")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Anastasiia Lukianenko [Thu, 6 Aug 2020 09:43:01 +0000 (12:43 +0300)]
doc: xen: Add Xen guest ARM64 board documentation
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Oleksandr Andrushchenko [Thu, 6 Aug 2020 09:43:00 +0000 (12:43 +0300)]
board: xen: De-initialize before jumping to Linux
Free resources used by Xen board before jumping to Linux kernel.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Anastasiia Lukianenko [Thu, 6 Aug 2020 09:42:59 +0000 (12:42 +0300)]
xen: pvblock: Print found devices indices
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Anastasiia Lukianenko [Thu, 6 Aug 2020 09:42:58 +0000 (12:42 +0300)]
xen: pvblock: Implement front-back protocol and do IO
Implement Xen para-virtual frontend to backend communication
and actually read/write disk data.
This is based on mini-os implementation of the para-virtual block
frontend driver.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Anastasiia Lukianenko [Thu, 6 Aug 2020 09:42:57 +0000 (12:42 +0300)]
xen: pvblock: Read XenStore configuration and initialize
Read essential virtual block device configuration data from XenStore,
initialize front ring and event channel.
Update block device description with actual block size.
Use code for XenStore from mini-os.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Anastasiia Lukianenko [Thu, 6 Aug 2020 09:42:56 +0000 (12:42 +0300)]
xen: pvblock: Enumerate virtual block devices
Enumerate Xen virtual block devices found in XenStore and
instantiate pvblock devices.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Anastasiia Lukianenko [Thu, 6 Aug 2020 09:42:55 +0000 (12:42 +0300)]
xen: pvblock: Add initial support for para-virtualized block driver
Add initial infrastructure for Xen para-virtualized block device.
This includes compile-time configuration and the skeleton for
the future driver implementation.
Add new class UCLASS_PVBLOCK which is going to be a parent for
virtual block devices.
Add new interface type IF_TYPE_PVBLOCK.
Implement basic driver setup by reading XenStore configuration.
Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Oleksandr Andrushchenko [Thu, 6 Aug 2020 09:42:54 +0000 (12:42 +0300)]
xen: Port Xen grant table driver from mini-os
Make required updates to run on u-boot.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Oleksandr Andrushchenko [Thu, 6 Aug 2020 09:42:53 +0000 (12:42 +0300)]
xen: Port Xen bus driver from mini-os
Make required updates to run on u-boot and strip test code.
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Andrii Anisov [Thu, 6 Aug 2020 09:42:52 +0000 (12:42 +0300)]
lib: sscanf: add sscanf implementation
Port sscanf implementation from mini-os and introduce new
Kconfig option to enable it: CONFIG_SSCANF. Disable by default.
Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Oleksandr Andrushchenko [Thu, 6 Aug 2020 09:42:51 +0000 (12:42 +0300)]
linux/compat.h: Add wait_event_timeout macro
Add wait_event_timeout - sleep until a condition gets true or a
timeout elapses.
This is a stripped version of the same from Linux kernel with the
following u-boot specific modifications:
- no wait queues supported
- use u-boot timer to detect timeouts
- check for Ctrl-C pressed during wait
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
[trini: Drop atomic_read from gadget/ether.c as this has existed for a
while and now causes problems]
Signed-off-by: Tom Rini <trini@konsulko.com>
Peng Fan [Thu, 6 Aug 2020 09:42:50 +0000 (12:42 +0300)]
serial: serial_xen: Add Xen PV serial driver
Add support for Xen para-virtualized serial driver. This
driver fully supports serial console for the virtual machine.
Please note that as the driver is initialized late, so no banner
nor memory size is visible.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Oleksandr Andrushchenko [Thu, 6 Aug 2020 09:42:49 +0000 (12:42 +0300)]
xen: Port Xen event channel driver from mini-os
Make required updates to run on u-boot. Strip functionality
not needed by U-boot.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Oleksandr Andrushchenko [Thu, 6 Aug 2020 09:42:48 +0000 (12:42 +0300)]
xen: Port Xen hypervisor related code from mini-os
Port hypervisor related code from Mini-OS. This is referencing the code
of Mini-OS from [1] by Huang Shijie and Volodymyr Babchuk which is for
ARM64.
Update essential arch code to support required bit operations, memory
barriers etc.
Copyright for the bits ported belong to at least the following authors,
please see related files for details:
Copyright (c) 2002-2003, K A Fraser
Copyright (c) 2005, Grzegorz Milos, gm281@cam.ac.uk,Intel Research Cambridge
Copyright (c) 2014, Karim Allah Ahmed <karim.allah.ahmed@gmail.com>
[1] - https://github.com/zyzii/mini-os.git
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
[trini: Drop wmb() from musb-net/linux-compat.h now]
Signed-off-by: Tom Rini <trini@konsulko.com>
Andrii Anisov [Thu, 6 Aug 2020 09:42:47 +0000 (12:42 +0300)]
board: Introduce xenguest_arm64 board
Introduce a minimal Xen guest board running as a virtual
machine under Xen Project's hypervisor [1], [2].
Part of the code is ported from Xen mini-os and also uses
work initially done by different authors from NXP: please see
relevant files for their copyrights.
[1] https://xenbits.xen.org
[2] https://wiki.xenproject.org/
Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Heinrich Schuchardt [Wed, 29 Jul 2020 10:49:24 +0000 (12:49 +0200)]
riscv: load addresses for Sipeed MAIX
Define default load addresses and the device tree name for the Sipeed MAIX.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Oleksandr Andrushchenko [Thu, 6 Aug 2020 09:42:46 +0000 (12:42 +0300)]
xen: Add essential and required interface headers
Add essential and required Xen interface headers only taken from
the stable Linux kernel stable/linux-5.7.y at commit
66dfe4522160 Linux 5.7.5.
These are better suited for U-boot than the original headers
from Xen as they are the stripped versions of the same.
At the same time use public protocols from Xen RELEASE-4.13.1, at
commit
6278553325a9 update Xen version to 4.13.1
as those have more comments in them.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 6 Aug 2020 09:42:45 +0000 (12:42 +0300)]
Kconfig: Introduce CONFIG_XEN
Introduce CONFIG_XEN to make U-Boot could be used as bootloader
for a virtual machine.
Without bootloader, we could successfully boot up android on XEN, but
we need need bootloader to support A/B, dm verify and etc.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Anastasiia Lukianenko [Thu, 6 Aug 2020 09:42:44 +0000 (12:42 +0300)]
Add MIT License
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Chia-Wei, Wang [Mon, 3 Aug 2020 09:36:10 +0000 (17:36 +0800)]
configs: evb-ast2500: Convert to OF_SEPARATE
Switch DTB provider form OF_EMBED to OF_SEPARATE
to avoid the compile warning message:
==================== WARNING ======================
CONFIG_OF_EMBED is enabled. This option should only
be used for debugging purposes. Please use
CONFIG_OF_SEPARATE for boards in mainline.
See doc/README.fdt-control for more info.
====================================================
Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Chia-Wei, Wang [Mon, 3 Aug 2020 09:36:09 +0000 (17:36 +0800)]
configs: evb-ast2500: Move BOOTCOMMAND from header to defconfig
Move the BOOTCOMMAND definition from the board inclusion
header to the default configuration file.
Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Chia-Wei, Wang [Mon, 3 Aug 2020 09:36:08 +0000 (17:36 +0800)]
include/configs: aspeed: Remove hardcoded variables
The hardcoded platform variables such as DRAM base address are not
common to Aspeed SoCs AST24xx/AST25xx/AST26xx. This patch replaces
those hardcoded with macros defined in a newly added header, where
the basic SoC HW information are assigned accordingly.
Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Chia-Wei, Wang [Mon, 3 Aug 2020 09:36:07 +0000 (17:36 +0800)]
cosmetic: aspeed: ast2500: Rename board file
Rename the ast2500-board.c to board_common.c and
place the renamed file under the ast2500 folder.
Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Chia-Wei, Wang [Mon, 3 Aug 2020 09:36:06 +0000 (17:36 +0800)]
aspeed: ast2500: Add lowlevel_init assembly
The original lowlevel_init function of AST2500 is written
in C. However, the C runtime environment is not ready until
_main execution.
This patch adds the assembly version of the lowlevel_init
function. Additional initialization to DRAM configuration
and LPC reset source are also added.
Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Chia-Wei, Wang [Mon, 3 Aug 2020 09:36:05 +0000 (17:36 +0800)]
MAINTAINERS: Add maintainers for Aspeed SoCs
Update maintainers for Aspeed SoC platforms.
Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Srinath Mannam [Tue, 12 May 2020 07:59:50 +0000 (13:29 +0530)]
drivers: pcie: add Broadcom IPROC PCIe RC driver
Add support for IPROC PAXC PCIe RC driver.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Simon Glass <sjg@chromium.org>