David Howells [Thu, 16 Mar 2017 16:27:47 +0000 (16:27 +0000)]
afs: Better abort and net error handling
[ Upstream commit
70af0e3bd65142f9e674961c975451638a7ce1d5 ]
If we receive a network error, a remote abort or a protocol error whilst
we're still transmitting data, make sure we return an appropriate error to
the caller rather than ESHUTDOWN or ECONNABORTED.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Thu, 16 Mar 2017 16:27:47 +0000 (16:27 +0000)]
afs: Invalid op ID should abort with RXGEN_OPCODE
[ Upstream commit
1157f153f37a8586765034470e4f00a4a6c4ce6f ]
When we are given an invalid operation ID, we should abort that with
RXGEN_OPCODE rather than RX_INVALID_OPERATION.
Also map RXGEN_OPCODE to -ENOTSUPP.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Thu, 16 Mar 2017 16:27:47 +0000 (16:27 +0000)]
afs: Fix the maths in afs_fs_store_data()
[ Upstream commit
146a1192783697810b63a1e41c4d59fc93387340 ]
afs_fs_store_data() works out of the size of the write it's going to make,
but it uses 32-bit unsigned subtraction in one place that gets
automatically cast to loff_t.
However, if to < offset, then the number goes negative, but as the result
isn't signed, this doesn't get sign-extended to 64-bits when placed in a
loff_t.
Fix by casting the operands to loff_t.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tina Ruchandani [Thu, 16 Mar 2017 16:27:46 +0000 (16:27 +0000)]
afs: Prevent callback expiry timer overflow
[ Upstream commit
56e714312e7dbd6bb83b2f78d3ec19a404c7649f ]
get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs_vnode record to use ktime_get_real_seconds() instead, for the
fields cb_expires and cb_expires_at.
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tina Ruchandani [Thu, 16 Mar 2017 16:27:46 +0000 (16:27 +0000)]
afs: Migrate vlocation fields to 64-bit
[ Upstream commit
8a79790bf0b7da216627ffb85f52cfb4adbf1e4e ]
get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs's vlocation record to use ktime_get_real_seconds() instead, for the
fields time_of_death and update_at.
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Thu, 16 Mar 2017 16:27:45 +0000 (16:27 +0000)]
afs: Flush outstanding writes when an fd is closed
[ Upstream commit
58fed94dfb17e89556b5705f20f90e5b2971b6a1 ]
Flush outstanding writes in afs when an fd is closed. This is what NFS and
CIFS do.
Reported-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Dionne [Thu, 16 Mar 2017 16:27:44 +0000 (16:27 +0000)]
afs: Deal with an empty callback array
[ Upstream commit
bcd89270d93b7edebb5de5e5e7dca1a77a33496e ]
Servers may send a callback array that is the same size as
the FID array, or an empty array. If the callback count is
0, the code would attempt to read (fid_count * 12) bytes of
data, which would fail and result in an unmarshalling error.
This would lead to stale data for remotely modified files
or directories.
Store the callback array size in the internal afs_call
structure and use that to determine the amount of data to
read.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Dionne [Thu, 16 Mar 2017 16:27:44 +0000 (16:27 +0000)]
afs: Adjust mode bits processing
[ Upstream commit
627f46943ff90bcc32ddeb675d881c043c6fa2ae ]
Mode bits for an afs file should not be enforced in the usual
way.
For files, the absence of user bits can restrict file access
with respect to what is granted by the server.
These bits apply regardless of the owner or the current uid; the
rest of the mode bits (group, other) are ignored.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Dionne [Thu, 16 Mar 2017 16:27:43 +0000 (16:27 +0000)]
afs: Populate group ID from vnode status
[ Upstream commit
6186f0788b31f44affceeedc7b48eb10faea120d ]
The group was hard coded to GLOBAL_ROOT_GID; use the group
ID that was received from the server.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Thu, 16 Mar 2017 16:27:43 +0000 (16:27 +0000)]
afs: Fix missing put_page()
[ Upstream commit
29c8bbbd6e21daa0997d1c3ee886b897ee7ad652 ]
In afs_writepages_region(), inside the loop where we find dirty pages to
deal with, one of the if-statements is missing a put_page().
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Thu, 16 Mar 2017 01:11:46 +0000 (21:11 -0400)]
drm/radeon: reinstate oland workaround for sclk
[ Upstream commit
66822d815ae61ecb2d9dba9031517e8a8476969d ]
Higher sclks seem to be unstable on some boards.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=100222
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yong mao [Sat, 4 Mar 2017 07:10:03 +0000 (15:10 +0800)]
mmc: mediatek: Fixed bug where clock frequency could be set wrong
[ Upstream commit
40ceda09c8c84694c2ca6b00bcc6dc71e8e62d96 ]
This patch can fix two issues:
Issue 1:
In previous code, div may be overflow when setting clock frequency
as f_min. We can use DIV_ROUND_UP to fix this boundary related
issue.
Issue 2:
In previous code, we can not set the correct clock frequency when
div equals 0xff.
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Thu, 2 Mar 2017 14:10:59 +0000 (15:10 +0100)]
sched/deadline: Use deadline instead of period when calculating overflow
[ Upstream commit
2317d5f1c34913bac5971d93d69fb6c31bb74670 ]
I was testing Daniel's changes with his test case, and tweaked it a
little. Instead of having the runtime equal to the deadline, I
increased the deadline ten fold.
Daniel's test case had:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
To make it more interesting, I changed it to:
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 20 * 1000 * 1000; /* 20 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
The results were rather surprising. The behavior that Daniel's patch
was fixing came back. The task started using much more than .1% of the
CPU. More like 20%.
Looking into this I found that it was due to the dl_entity_overflow()
constantly returning true. That's because it uses the relative period
against relative runtime vs the absolute deadline against absolute
runtime.
runtime / (deadline - t) > dl_runtime / dl_period
There's even a comment mentioning this, and saying that when relative
deadline equals relative period, that the equation is the same as using
deadline instead of period. That comment is backwards! What we really
want is:
runtime / (deadline - t) > dl_runtime / dl_deadline
We care about if the runtime can make its deadline, not its period. And
then we can say "when the deadline equals the period, the equation is
the same as using dl_period instead of dl_deadline".
After correcting this, now when the task gets enqueued, it can throttle
correctly, and Daniel's fix to the throttling of sleeping deadline
tasks works even when the runtime and deadline are not the same.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/02135a27f1ae3fe5fd032568a5a2f370e190e8d7.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Bristot de Oliveira [Thu, 2 Mar 2017 14:10:58 +0000 (15:10 +0100)]
sched/deadline: Throttle a constrained deadline task activated after the deadline
[ Upstream commit
df8eac8cafce7d086be3bd5cf5a838fa37594dfb ]
During the activation, CBS checks if it can reuse the current task's
runtime and period. If the deadline of the task is in the past, CBS
cannot use the runtime, and so it replenishes the task. This rule
works fine for implicit deadline tasks (deadline == period), and the
CBS was designed for implicit deadline tasks. However, a task with
constrained deadline (deadine < period) might be awakened after the
deadline, but before the next period. In this case, replenishing the
task would allow it to run for runtime / deadline. As in this case
deadline < period, CBS enables a task to run for more than the
runtime / period. In a very loaded system, this can cause a domino
effect, making other tasks miss their deadlines.
To avoid this problem, in the activation of a constrained deadline
task after the deadline but before the next period, throttle the
task and set the replenishing timer to the begin of the next period,
unless it is boosted.
Reproducer:
--------------- %< ---------------
int main (int argc, char **argv)
{
int ret;
int flags = 0;
unsigned long l = 0;
struct timespec ts;
struct sched_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 2 * 1000 * 1000; /* 2 ms */
attr.sched_deadline = 2 * 1000 * 1000; /* 2 ms */
attr.sched_period = 2 * 1000 * 1000 * 1000; /* 2 s */
ts.tv_sec = 0;
ts.tv_nsec = 2000 * 1000; /* 2 ms */
ret = sched_setattr(0, &attr, flags);
if (ret < 0) {
perror("sched_setattr");
exit(-1);
}
for(;;) {
/* XXX: you may need to adjust the loop */
for (l = 0; l < 150000; l++);
/*
* The ideia is to go to sleep right before the deadline
* and then wake up before the next period to receive
* a new replenishment.
*/
nanosleep(&ts, NULL);
}
exit(0);
}
--------------- >% ---------------
On my box, this reproducer uses almost 50% of the CPU time, which is
obviously wrong for a task with 2/2000 reservation.
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/edf58354e01db46bf42df8d2dd32418833f68c89.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Bristot de Oliveira [Thu, 2 Mar 2017 14:10:57 +0000 (15:10 +0100)]
sched/deadline: Make sure the replenishment timer fires in the next period
[ Upstream commit
5ac69d37784b237707a7b15d199cdb6c6fdb6780 ]
Currently, the replenishment timer is set to fire at the deadline
of a task. Although that works for implicit deadline tasks because the
deadline is equals to the begin of the next period, that is not correct
for constrained deadline tasks (deadline < period).
For instance:
f.c:
--------------- %< ---------------
int main (void)
{
for(;;);
}
--------------- >% ---------------
# gcc -o f f.c
# trace-cmd record -e sched:sched_switch \
-e syscalls:sys_exit_sched_setattr \
chrt -d --sched-runtime
490000000 \
--sched-deadline
500000000 \
--sched-period
1000000000 0 ./f
# trace-cmd report | grep "{pid of ./f}"
After setting parameters, the task is replenished and continue running
until being throttled:
f-11295 [003] 13322.113776: sys_exit_sched_setattr: 0x0
The task is throttled after running 492318 ms, as expected:
f-11295 [003] 13322.606094: sched_switch: f:11295 [-1] R ==> watchdog/3:32 [0]
But then, the task is replenished 500719 ms after the first
replenishment:
<idle>-0 [003] 13322.614495: sched_switch: swapper/3:0 [120] R ==> f:11295 [-1]
Running for 490277 ms:
f-11295 [003] 13323.104772: sched_switch: f:11295 [-1] R ==> swapper/3:0 [120]
Hence, in the first period, the task runs 2 * runtime, and that is a bug.
During the first replenishment, the next deadline is set one period away.
So the runtime / period starts to be respected. However, as the second
replenishment took place in the wrong instant, the next replenishment
will also be held in a wrong instant of time. Rather than occurring in
the nth period away from the first activation, it is taking place
in the (nth period - relative deadline).
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Romulo Silva de Oliveira <romulo.deoliveira@ufsc.br>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/ac50d89887c25285b47465638354b63362f8adff.1488392936.git.bristot@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wanpeng Li [Tue, 7 Mar 2017 05:51:28 +0000 (21:51 -0800)]
sched/deadline: Add missing update_rq_clock() in dl_task_timer()
[ Upstream commit
dcc3b5ffe1b32771c9a22e2c916fb94c4fcf5b79 ]
The following warning can be triggered by hot-unplugging the CPU
on which an active SCHED_DEADLINE task is running on:
------------[ cut here ]------------
WARNING: CPU: 7 PID: 0 at kernel/sched/sched.h:833 replenish_dl_entity+0x71e/0xc40
rq->clock_update_flags < RQCF_ACT_SKIP
CPU: 7 PID: 0 Comm: swapper/7 Tainted: G B 4.11.0-rc1+ #24
Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016
Call Trace:
<IRQ>
dump_stack+0x85/0xc4
__warn+0x172/0x1b0
warn_slowpath_fmt+0xb4/0xf0
? __warn+0x1b0/0x1b0
? debug_check_no_locks_freed+0x2c0/0x2c0
? cpudl_set+0x3d/0x2b0
replenish_dl_entity+0x71e/0xc40
enqueue_task_dl+0x2ea/0x12e0
? dl_task_timer+0x777/0x990
? __hrtimer_run_queues+0x270/0xa50
dl_task_timer+0x316/0x990
? enqueue_task_dl+0x12e0/0x12e0
? enqueue_task_dl+0x12e0/0x12e0
__hrtimer_run_queues+0x270/0xa50
? hrtimer_cancel+0x20/0x20
? hrtimer_interrupt+0x119/0x600
hrtimer_interrupt+0x19c/0x600
? trace_hardirqs_off+0xd/0x10
local_apic_timer_interrupt+0x74/0xe0
smp_apic_timer_interrupt+0x76/0xa0
apic_timer_interrupt+0x93/0xa0
The DL task will be migrated to a suitable later deadline rq once the DL
timer fires and currnet rq is offline. The rq clock of the new rq should
be updated. This patch fixes it by updating the rq clock after holding
the new rq's rq lock.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1488865888-15894-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sara Sharon [Tue, 14 Mar 2017 07:50:35 +0000 (09:50 +0200)]
iwlwifi: mvm: cleanup pending frames in DQA mode
[ Upstream commit
9a3fcf912ef7f5c6e18f9af6875dd13f7311f7aa ]
When a station is asleep, the fw will set it as "asleep".
All queues that are used only by one station will be stopped by
the fw.
In pre-DQA mode this was relevant for aggregation queues. However,
in DQA mode a queue is owned by one station only, so all queues
will be stopped.
As a result, we don't expect to get filtered frames back to
mac80211 and don't have to maintain the entire pending_frames
state logic, the same way as we do in aggregations.
The correct behavior is to align DQA behavior with the aggregation
queue behaviour pre-DQA:
- Don't count pending frames.
- Let mac80211 know we have frames in these queues so that it can
properly handle trigger frames.
When a trigger frame is received, mac80211 tells the driver to send
frames from the queues using release_buffered_frames.
The driver will tell the fw to let frames out even if the station
is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count.
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vitaly Kuznetsov [Sun, 5 Mar 2017 01:13:59 +0000 (18:13 -0700)]
Drivers: hv: util: move waiting for release to hv_utils_transport itself
[ Upstream commit
e9c18ae6eb2b312f16c63e34b43ea23926daa398 ]
Waiting for release_event in all three drivers introduced issues on release
as on_reset() hook is not always called. E.g. if the device was never
opened we will never get the completion.
Move the waiting code to hvutil_transport_destroy() and make sure it is
only called when the device is open. hvt->lock serialization should
guarantee the absence of races.
Fixes:
5a66fecbf6aa ("Drivers: hv: util: kvp: Fix a rescind processing issue")
Fixes:
20951c7535b5 ("Drivers: hv: util: Fcopy: Fix a rescind processing issue")
Fixes:
d77044d142e9 ("Drivers: hv: util: Backup: Fix a rescind processing issue")
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 14 Mar 2017 18:42:03 +0000 (14:42 -0400)]
drm/radeon/si: add dpm quirk for Oland
[ Upstream commit
0f424de1fd9bc4ab24bd1fe5430ab5618e803e31 ]
OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems
with higher sclks.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taku Izumi [Wed, 15 Mar 2017 04:47:50 +0000 (13:47 +0900)]
fjes: Fix wrong netdevice feature flags
[ Upstream commit
fe8daf5fa715f7214952f06a387e4b7de818c5be ]
This patch fixes netdev->features for Extended Socket network device.
Currently Extended Socket network device's netdev->feature claims
NETIF_F_HW_CSUM, however this is completely wrong. There's no feature
of checksum offloading.
That causes invalid TCP/UDP checksum and packet rejection when IP
forwarding from Extended Socket network device to other network device.
NETIF_F_HW_CSUM should be omitted.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don Brace [Fri, 10 Mar 2017 20:35:23 +0000 (14:35 -0600)]
scsi: hpsa: do not timeout reset operations
[ Upstream commit
2ef2884980873081a4edae92f9d88dd580c85f6e ]
Resets can take longer than DEFAULT_TIMEOUT.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don Brace [Fri, 10 Mar 2017 20:35:17 +0000 (14:35 -0600)]
scsi: hpsa: limit outstanding rescans
[ Upstream commit
87b9e6aa87d9411f1059aa245c0c79976bc557ac ]
Avoid rescan storms. No need to queue another if one is pending.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don Brace [Fri, 10 Mar 2017 20:35:11 +0000 (14:35 -0600)]
scsi: hpsa: update check for logical volume status
[ Upstream commit
85b29008d8af6d94a0723aaa8d93cfb6e041158b ]
- Add in a new case for volume offline. Resolves internal testing bug
for multilun array management.
- Return correct status for failed TURs.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kuninori Morimoto [Tue, 14 Mar 2017 00:34:49 +0000 (09:34 +0900)]
ASoC: rcar: clear DE bit only in PDMACHCR when it stops
[ Upstream commit
62a10498afb27370ec6018e9d802b74850fd8d9a ]
R-Car datasheet indicates "Clear DE in PDMACHCR" for transfer stop,
but current code clears all bits in PDMACHCR.
Because of this, DE bit might never been cleared,
and it causes CMD overflow. This patch fixes this issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stafford Horne [Sun, 12 Mar 2017 22:44:45 +0000 (07:44 +0900)]
openrisc: fix issue handling 8 byte get_user calls
[ Upstream commit
154e67cd8e8f964809d0e75e44bb121b169c75b3 ]
Was getting the following error with allmodconfig:
ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined!
This was simply a missing break statement, causing an unwanted fall
through.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Thu, 30 Jun 2016 13:10:51 +0000 (16:10 +0300)]
intel_th: pci: Add Gemini Lake support
[ Upstream commit
340837f985c2cb87ca0868d4aa9ce42b0fab3a21 ]
This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 14 Mar 2017 21:27:11 +0000 (22:27 +0100)]
drm: amd: remove broken include path
[ Upstream commit
655d9ca9ac075da1ef2a45012ba48a39f6eb1f58 ]
The AMD ACP driver adds "-I../acp -I../acp/include" to the gcc command
line, which makes no sense, since these are evaluated relative to the
build directory. When we build with "make W=1", they instead cause
a warning:
cc1: error: ../acp/: No such file or directory [-Werror=missing-include-dirs]
cc1: error: ../acp/include: No such file or directory [-Werror=missing-include-dirs]
cc1: all warnings being treated as errors
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o' failed
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_device.o' failed
../scripts/Makefile.build:289: recipe for target 'drivers/gpu/drm/amd/amdgpu/amdgpu_kms.o' failed
This removes the subdir-ccflags variable that evidently did not
serve any purpose here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ram Amrani [Tue, 14 Mar 2017 13:26:02 +0000 (15:26 +0200)]
qed: Fix interrupt flags on Rx LL2
[ Upstream commit
1df2adedcce17ad4a39fba74f0e2b611f797fe10 ]
Before iterating over the the LL2 Rx ring, the ring's
spinlock is taken via spin_lock_irqsave().
The actual processing of the packet [including handling
by the protocol driver] is done without said lock,
so qed releases the spinlock and re-claims it afterwards.
Problem is that the final spin_lock_irqrestore() at the end
of the iteration uses the original flags saved from the
initial irqsave() instead of the flags from the most recent
irqsave(). So it's possible that the interrupt status would
be incorrect at the end of the processing.
Fixes:
0a7fb11c23c0 ("qed: Add Light L2 support");
CC: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mintz, Yuval [Tue, 14 Mar 2017 13:26:00 +0000 (15:26 +0200)]
qed: Fix mapping leak on LL2 rx flow
[ Upstream commit
752ecb2da11124a948567076b60767dc8034cfa5 ]
When receiving an Rx LL2 packet, qed fails to unmap the previous buffer.
Fixes:
0a7fb11c23c0 ("qed: Add Light L2 support");
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ram Amrani [Tue, 14 Mar 2017 13:25:58 +0000 (15:25 +0200)]
qed: Align CIDs according to DORQ requirement
[ Upstream commit
f3e48119b97f56fb09310c95d49da122a27003d7 ]
The Doorbell HW block can be configured at a granularity
of 16 x CIDs, so we need to make sure that the actual number
of CIDs configured would be a multiplication of 16.
Today, when RoCE is enabled - given that the number is unaligned,
doorbelling the higher CIDs would fail to reach the firmware and
would eventually timeout.
Fixes:
dbb799c39717 ("qed: Initialize hardware for new protocols")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Pirko [Tue, 14 Mar 2017 13:00:01 +0000 (14:00 +0100)]
mlxsw: reg: Fix SPVMLR max record count
[ Upstream commit
e9093b1183bbac462d2caef3eac165778c0b1bf1 ]
The num_rec field is 8 bit, so the maximal count number is 255.
This fixes vlans learning not being enabled for wider ranges than 255.
Fixes:
a4feea74cd7a ("mlxsw: reg: Add Switch Port VLAN MAC Learning register definition")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Pirko [Tue, 14 Mar 2017 13:00:00 +0000 (14:00 +0100)]
mlxsw: reg: Fix SPVM max record count
[ Upstream commit
f004ec065b4879d6bc9ba0211af2169b3ce3097f ]
The num_rec field is 8 bit, so the maximal count number is 255. This
fixes vlans not being enabled for wider ranges than 255.
Fixes:
b2e345f9a454 ("mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitions")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlad Yasevich [Tue, 14 Mar 2017 12:58:08 +0000 (08:58 -0400)]
net: Resend IGMP memberships upon peer notification.
[ Upstream commit
37c343b4f4e70e9dc328ab04903c0ec8d154c1a4 ]
When we notify peers of potential changes, it's also good to update
IGMP memberships. For example, during VM migration, updating IGMP
memberships will redirect existing multicast streams to the VM at the
new location.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 14 Mar 2017 12:54:12 +0000 (13:54 +0100)]
irqchip/mvebu-odmi: Select GENERIC_MSI_IRQ_DOMAIN
[ Upstream commit
fa23b9d1b89fdc34f296f02e496a20aeff5736be ]
This driver uses the MSI domain but has no strict dependency on PCI_MSI, so we
may run into a build failure when CONFIG_GENERIC_MSI_IRQ_DOMAIN is disabled:
drivers/irqchip/irq-mvebu-odmi.c:152:15: error: variable 'odmi_msi_ops' has initializer but incomplete type
static struct msi_domain_ops odmi_msi_ops = {
^~~~~~~~~~~~~~
drivers/irqchip/irq-mvebu-odmi.c:155:15: error: variable 'odmi_msi_domain_info' has initializer but incomplete type
static struct msi_domain_info odmi_msi_domain_info = {
^~~~~~~~~~~~~~~
drivers/irqchip/irq-mvebu-odmi.c:156:3: error: 'struct msi_domain_info' has no member named 'flags'
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
^~~~~
drivers/irqchip/irq-mvebu-odmi.c:156:12: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function)
.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/irqchip/irq-mvebu-odmi.c:156:39: error: 'MSI_FLAG_USE_DEF_CHIP_OPS' undeclared here (not in a function); did you mean 'MSI_FLAG_USE_DEF_DOM_OPS'?
Selecting the option from this driver seems to solve this nicely, though I could
not find any other instance of this in irqchip drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matthias Kaehlcke [Mon, 13 Mar 2017 21:30:29 +0000 (14:30 -0700)]
dmaengine: Fix array index out of bounds warning in __get_unmap_pool()
[ Upstream commit
23f963e91fd81f44f6b316b1c24db563354c6be8 ]
This fixes the following warning when building with clang and
CONFIG_DMA_ENGINE_RAID=n :
drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
return &unmap_pool[2];
^ ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {
^
drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds]
return &unmap_pool[3];
^ ~
drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here
static struct dmaengine_unmap_pool unmap_pool[] = {
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 13 Mar 2017 12:42:03 +0000 (13:42 +0100)]
net: wimax/i2400m: fix NULL-deref at probe
[ Upstream commit
6e526fdff7be4f13b24f929a04c0e9ae6761291e ]
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
The endpoints are specifically dereferenced in the i2400m_bootrom_init
path during probe (e.g. in i2400mu_tx_bulk_out).
Fixes:
f398e4240fce ("i2400m/USB: probe/disconnect, dev init/shutdown
and reset backends")
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tahsin Erdogan [Fri, 10 Mar 2017 20:09:49 +0000 (12:09 -0800)]
writeback: fix memory leak in wb_queue_work()
[ Upstream commit
4a3a485b1ed0e109718cc8c9d094fa0f552de9b2 ]
When WB_registered flag is not set, wb_queue_work() skips queuing the
work, but does not perform the necessary clean up. In particular, if
work->auto_free is true, it should free the memory.
The leak condition can be reprouced by following these steps:
mount /dev/sdb /mnt/sdb
/* In qemu console: device_del sdb */
umount /dev/sdb
Above will result in a wb_queue_work() call on an unregistered wb and
thus leak memory.
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagi Grimberg [Mon, 13 Mar 2017 14:10:11 +0000 (16:10 +0200)]
blk-mq: Fix tagset reinit in the presence of cpu hot-unplug
[ Upstream commit
0067d4b020ea07a58540acb2c5fcd3364bf326e0 ]
In case cpu was unplugged, we need to make sure not to assume
that the tags for that cpu are still allocated. so check
for null tags when reinitializing a tagset.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hiroyuki Yokoyama [Wed, 1 Mar 2017 03:51:00 +0000 (03:51 +0000)]
ASoC: rsnd: fix sound route path when using SRC6/SRC9
[ Upstream commit
a1c2ff53726907aff5feb37e4cfd45c1ff626431 ]
This patch fixes the problem that the missing value of the route path
setting table and incorrect values are set in the CMD_ROUTE_SELECT
register.
Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
[Kuninori: shared data on MIX and non-MIX case]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Thu, 9 Mar 2017 22:22:30 +0000 (23:22 +0100)]
netfilter: bridge: honor frag_max_size when refragmenting
[ Upstream commit
4ca60d08cbe65f501baad64af50fceba79c19fbb ]
consider a bridge with mtu 9000, but end host sending smaller
packets to another host with mtu < 9000.
In this case, after reassembly, bridge+defrag would refragment,
and then attempt to send the reassembled packet as long as it
was below 9k.
Instead we have to cap by the largest fragment size seen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomi Valkeinen [Tue, 28 Feb 2017 08:11:45 +0000 (10:11 +0200)]
drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
[ Upstream commit
9fa1d7537242bd580ffa99c4725a0407096aad26 ]
omap_gem_dmabuf_mmap() returns an error (with a WARN) when called for a
buffer which is allocated with dma_alloc_*(). This prevents dmabuf mmap
from working on SoCs without DMM, e.g. AM4 and OMAP3.
I could not find any reason for omap_gem_dmabuf_mmap() rejecting such
buffers, and just removing the if() fixes the limitation.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Torokhov [Wed, 1 Mar 2017 01:14:41 +0000 (17:14 -0800)]
Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux list
[ Upstream commit
a4c2a13129f7c5bcf81704c06851601593303fd5 ]
TUXEDO BU1406 does not implement active multiplexing mode properly,
and takes around 550 ms in i8042_set_mux_mode(). Given that the
device does not have external AUX port, there is no downside in
disabling the MUX mode.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Suggested-by: Vojtech Pavlik <vojtech@suse.cz>
Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Fri, 10 Mar 2017 00:36:39 +0000 (11:36 +1100)]
NFSD: fix nfsd_reset_versions for NFSv4.
[ Upstream commit
800a938f0bf9130c8256116649c0cc5806bfb2fd ]
If you write "-2 -3 -4" to the "versions" file, it will
notice that no versions are enabled, and nfsd_reset_versions()
is called.
This enables all major versions, not no minor versions.
So we lose the invariant that NFSv4 is only advertised when
at least one minor is enabled.
Fix the code to explicitly enable minor versions for v4,
change it to use nfsd_vers() to test and set, and simplify
the code.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Fri, 10 Mar 2017 00:36:39 +0000 (11:36 +1100)]
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
[ Upstream commit
928c6fb3a9bfd6c5b287aa3465226add551c13c0 ]
Current code will return 1 if the version is supported,
and -1 if it isn't.
This is confusing and inconsistent with the one place where this
is used.
So change to return 1 if it is supported, and zero if not.
i.e. an error is never returned.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Fri, 10 Mar 2017 02:13:04 +0000 (12:13 +1000)]
drm/amdgpu: fix parser init error path to avoid crash in parser fini
[ Upstream commit
607523d19c9d67ba4cf7bdaced644f11ed04992c ]
If we don't reset the chunk info in the error path, the subsequent
fini path will double free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleksandr Tyshchenko [Mon, 27 Feb 2017 12:30:26 +0000 (14:30 +0200)]
iommu/io-pgtable-arm-v7s: Check for leaf entry before dereferencing it
[ Upstream commit
a03849e7210277fa212779b7cd9c30e1ab6194b2 ]
Do a check for already installed leaf entry at the current level before
dereferencing it in order to avoid walking the page table down with
wrong pointer to the next level.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Jurgens [Fri, 10 Mar 2017 12:33:02 +0000 (14:33 +0200)]
net/mlx5: Don't save PCI state when PCI error is detected
[ Upstream commit
5d47f6c89d568ab61712d8c40676fbb020b68752 ]
When a PCI error is detected the PCI state could be corrupt, don't save
it in that flow. Save the state after initialization. After restoring the
PCI state during slot reset save it again, restoring the state destroys
the previously saved state info.
Fixes:
05ac2c0b7438 ('net/mlx5: Fix race between PCI error handlers and
health work')
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Blakey [Fri, 10 Mar 2017 12:33:01 +0000 (14:33 +0200)]
net/mlx5: Fix create autogroup prev initializer
[ Upstream commit
af36370569eb37420e1e78a2e60c277b781fcd00 ]
The autogroups list is a list of non overlapping group boundaries
sorted by their start index. If the autogroups list wasn't empty
and an empty group slot was found at the start of the list,
the new group was added to the end of the list instead of the
beginning, as the prev initializer was incorrect.
When this was repeated, it caused multiple groups to have
overlapping boundaries.
Fixed that by correctly initializing the prev pointer to the
start of the list.
Fixes:
eccec8da3b4e ('net/mlx5: Keep autogroups list ordered')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 10 Mar 2017 07:48:49 +0000 (07:48 +0000)]
rxrpc: Wake up the transmitter if Rx window size increases on the peer
[ Upstream commit
702f2ac87a9a8da23bf8506466bc70175fc970b2 ]
The RxRPC ACK packet may contain an extension that includes the peer's
current Rx window size for this call. We adjust the local Tx window size
to match. However, the transmitter can stall if the receive window is
reduced to 0 by the peer and then reopened.
This is because the normal way that the transmitter is re-energised is by
dropping something out of our Tx queue and thus making space. When a
single gap is made, the transmitter is woken up. However, because there's
nothing in the Tx queue at this point, this doesn't happen.
To fix this, perform a wake_up() any time we see the peer's Rx window size
increasing.
The observable symptom is that calls start failing on ETIMEDOUT and the
following:
kAFS: SERVER DEAD state=-62
appears in dmesg.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Fri, 10 Mar 2017 00:58:48 +0000 (16:58 -0800)]
net: bcmgenet: Power up the internal PHY before probing the MII
[ Upstream commit
6be371b053dc86f11465cc1abce2e99bda0a0574 ]
When using the internal PHY it must be powered up when the MII is probed
or the PHY will not be detected. Since the PHY is powered up at reset
this has not been a problem. However, when the kernel is restarted with
kexec the PHY will likely be powered down when the kernel starts so it
will not be detected and the Ethernet link will not be established.
This commit explicitly powers up the internal PHY when the GENET driver
is probed to correct this behavior.
Fixes:
1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Fri, 10 Mar 2017 00:58:47 +0000 (16:58 -0800)]
net: bcmgenet: synchronize irq0 status between the isr and task
[ Upstream commit
07c52d6a0b955a8a28834f9354793cfc4b81d0e9 ]
Add a spinlock to ensure that irq0_stat is not unintentionally altered
as the result of preemption. Also removed unserviced irq0 interrupts
and removed irq1_stat since there is no bottom half service for those
interrupts.
Fixes:
1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Fri, 10 Mar 2017 00:58:46 +0000 (16:58 -0800)]
net: bcmgenet: power down internal phy if open or resume fails
[ Upstream commit
7627409cc4970e8c8b9de6945ad86a575290a94e ]
Since the internal PHY is powered up during the open and resume
functions it should be powered back down if the functions fail.
Fixes:
1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Fri, 10 Mar 2017 00:58:45 +0000 (16:58 -0800)]
net: bcmgenet: reserved phy revisions must be checked first
[ Upstream commit
eca4bad73409aedc6ff22f823c18b67a4f08c851 ]
The reserved gphy_rev value of 0x01ff must be tested before the old
or new scheme for GPHY major versioning are tested, otherwise it will
be treated as 0xff00 according to the old scheme.
Fixes:
b04a2f5b9ff5 ("net: bcmgenet: add support for new GENET PHY revision scheme")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Fri, 10 Mar 2017 00:58:44 +0000 (16:58 -0800)]
net: bcmgenet: correct MIB access of UniMAC RUNT counters
[ Upstream commit
1ad3d225e5a40ca6c586989b4baaca710544c15a ]
The gap between the Tx status counters and the Rx RUNT counters is now
being added to allow correct reporting of the registers.
Fixes:
1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Fri, 10 Mar 2017 00:58:43 +0000 (16:58 -0800)]
net: bcmgenet: correct the RBUF_OVFL_CNT and RBUF_ERR_CNT MIB values
[ Upstream commit
ffff71328a3c321f7c14cc1edd33577717037744 ]
The location of the RBUF overflow and error counters has moved between
different version of the GENET MAC. This commit corrects the driver to
read from the correct locations depending on the version of the GENET
MAC.
Fixes:
1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Chan [Wed, 8 Mar 2017 23:44:35 +0000 (18:44 -0500)]
bnxt_en: Ignore 0 value in autoneg supported speed from firmware.
[ Upstream commit
520ad89a54edea84496695d528f73ddcf4a52ea4 ]
In some situations, the firmware will return 0 for autoneg supported
speed. This may happen if the firmware detects no SFP module, for
example. The driver should ignore this so that we don't end up with
an invalid autoneg setting with nothing advertised. When SFP module
is inserted, we'll get the updated settings from firmware at that time.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Potapenko [Wed, 8 Mar 2017 17:08:16 +0000 (18:08 +0100)]
net: initialize msg.msg_flags in recvfrom
[ Upstream commit
9f138fa609c47403374a862a08a41394be53d461 ]
KMSAN reports a use of uninitialized memory in put_cmsg() because
msg.msg_flags in recvfrom haven't been initialized properly.
The flag values don't affect the result on this path, but it's still a
good idea to initialize them explicitly.
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Arcangeli [Fri, 10 Mar 2017 00:17:14 +0000 (16:17 -0800)]
userfaultfd: selftest: vm: allow to build in vm/ directory
[ Upstream commit
46aa6a302b53f543f8e8b8e1714dc5e449ad36a6 ]
linux/tools/testing/selftests/vm $ make
gcc -Wall -I ../../../../usr/include compaction_test.c -lrt -o /compaction_test
/usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:54: /compaction_test] Error 1
Since commit
a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
selftests/vm build fails if run from the "selftests/vm" directory, but
it works in the selftests/ directory. It's quicker to be able to do a
local vm-only build after a tree wipe and this patch allows for it
again.
Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Arcangeli [Fri, 10 Mar 2017 00:16:28 +0000 (16:16 -0800)]
userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGE
[ Upstream commit
6bbc4a4144b1a69743022ac68dfaf6e7d993abb9 ]
__do_fault assumes vmf->page has been initialized and is valid if
VM_FAULT_NOPAGE is not returned by vma->vm_ops->fault(vma, vmf).
handle_userfault() in turn should return VM_FAULT_NOPAGE if it doesn't
return VM_FAULT_SIGBUS or VM_FAULT_RETRY (the other two possibilities).
This VM_FAULT_NOPAGE case is only invoked when signal are pending and it
didn't matter for anonymous memory before. It only started to matter
since shmem was introduced. hugetlbfs also takes a different path and
doesn't exercise __do_fault.
Link: http://lkml.kernel.org/r/20170228154201.GH5816@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guoqing Jiang [Fri, 24 Feb 2017 03:15:12 +0000 (11:15 +0800)]
md-cluster: free md_cluster_info if node leave cluster
[ Upstream commit
9c8043f337f14d1743006dfc59c03e80a42e3884 ]
To avoid memory leak, we need to free the cinfo which
is allocated when node join cluster.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Thu, 9 Mar 2017 13:39:34 +0000 (15:39 +0200)]
usb: xhci-mtk: check hcc_params after adding primary hcd
[ Upstream commit
94a631d91ad341b3b4bdac72d1104d9f090e0ca9 ]
hcc_params is set in xhci_gen_setup() called from usb_add_hcd(),
so checks the Maximum Primary Stream Array Size in the hcc_params
register after adding primary hcd.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Radim Krčmář [Tue, 7 Mar 2017 16:51:49 +0000 (17:51 +0100)]
KVM: nVMX: do not warn when MSR bitmap address is not backed
[ Upstream commit
05d8d34611139f8435af90ac54b65eb31e82e388 ]
Before trying to do nested_get_page() in nested_vmx_merge_msr_bitmap(),
we have already checked that the MSR bitmap address is valid (4k aligned
and within physical limits). SDM doesn't specify what happens if the
there is no memory mapped at the valid address, but Intel CPUs treat the
situation as if the bitmap was configured to trap all MSRs.
KVM already does that by returning false and a correct handling doesn't
need the guest-trigerrable warning that was reported by syzkaller:
(The warning was originally there to catch some possible bugs in nVMX.)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709
nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline]
WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709
nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 7832 Comm: syz-executor1 Not tainted 4.10.0+ #229
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x2ee/0x3ef lib/dump_stack.c:51
panic+0x1fb/0x412 kernel/panic.c:179
__warn+0x1c4/0x1e0 kernel/panic.c:540
warn_slowpath_null+0x2c/0x40 kernel/panic.c:583
nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline]
nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640
enter_vmx_non_root_mode arch/x86/kvm/vmx.c:10471 [inline]
nested_vmx_run+0x6186/0xaab0 arch/x86/kvm/vmx.c:10561
handle_vmlaunch+0x1a/0x20 arch/x86/kvm/vmx.c:7312
vmx_handle_exit+0xfc0/0x3f00 arch/x86/kvm/vmx.c:8526
vcpu_enter_guest arch/x86/kvm/x86.c:6982 [inline]
vcpu_run arch/x86/kvm/x86.c:7044 [inline]
kvm_arch_vcpu_ioctl_run+0x1418/0x4840 arch/x86/kvm/x86.c:7205
kvm_vcpu_ioctl+0x673/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2570
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
[Jim Mattson explained the bare metal behavior: "I believe this behavior
would be documented in the chipset data sheet rather than the SDM,
since the chipset returns all 1s for an unclaimed read."]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier Martinez Canillas [Wed, 22 Feb 2017 18:23:22 +0000 (15:23 -0300)]
usb: phy: isp1301: Add OF device ID table
[ Upstream commit
fd567653bdb908009b650f079bfd4b63169e2ac4 ]
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.
But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilan peer [Mon, 26 Dec 2016 16:17:36 +0000 (18:17 +0200)]
mac80211: Fix addition of mesh configuration element
commit
57629915d568c522ac1422df7bba4bee5b5c7a7c upstream.
The code was setting the capabilities byte to zero,
after it was already properly set previously. Fix it.
The bug was found while debugging hwsim mesh tests failures
that happened since the commit mentioned below.
Fixes:
76f43b4c0a93 ("mac80211: Remove invalid flag operations in mesh TSF synchronization")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Richard Schütz <rschuetz@uni-koblenz.de>
Cc: Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chandan Rajendra [Mon, 11 Dec 2017 20:00:57 +0000 (15:00 -0500)]
ext4: fix crash when a directory's i_size is too small
commit
9d5afec6b8bd46d6ed821aa1579634437f58ef1f upstream.
On a ppc64 machine, when mounting a fuzzed ext2 image (generated by
fsfuzzer) the following call trace is seen,
VFS: brelse: Trying to free free buffer
WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40
.__brelse.part.6+0x20/0x40 (unreliable)
.ext4_find_entry+0x384/0x4f0
.ext4_lookup+0x84/0x250
.lookup_slow+0xdc/0x230
.walk_component+0x268/0x400
.path_lookupat+0xec/0x2d0
.filename_lookup+0x9c/0x1d0
.vfs_statx+0x98/0x140
.SyS_newfstatat+0x48/0x80
system_call+0x58/0x6c
This happens because the directory that ext4_find_entry() looks up has
inode->i_size that is less than the block size of the filesystem. This
causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not
reading any of the directory file's blocks. This renders the entries in
bh_use[] array to continue to have garbage data. buffer_uptodate() on
bh_use[0] can then return a zero value upon which brelse() function is
invoked.
This commit fixes the bug by returning -ENOENT when the directory file
has no associated blocks.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eryu Guan [Mon, 4 Dec 2017 03:52:51 +0000 (22:52 -0500)]
ext4: fix fdatasync(2) after fallocate(2) operation
commit
c894aa97577e47d3066b27b32499ecf899bfa8b0 upstream.
Currently, fallocate(2) with KEEP_SIZE followed by a fdatasync(2)
then crash, we'll see wrong allocated block number (stat -c %b), the
blocks allocated beyond EOF are all lost. fstests generic/468
exposes this bug.
Commit
67a7d5f561f4 ("ext4: fix fdatasync(2) after extent
manipulation operations") fixed all the other extent manipulation
operation paths such as hole punch, zero range, collapse range etc.,
but forgot the fallocate case.
So similarly, fix it by recording the correct journal tid in ext4
inode in fallocate(2) path, so that ext4_sync_file() will wait for
the right tid to be committed on fdatasync(2).
This addresses the test failure in xfstests test generic/468.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adam Wallis [Mon, 27 Nov 2017 15:45:01 +0000 (10:45 -0500)]
dmaengine: dmatest: move callback wait queue to thread context
commit
6f6a23a213be51728502b88741ba6a10cda2441d upstream.
Commit
adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
introduced a bug (that is in fact documented by the patch commit text)
that leaves behind a dangling pointer. Since the done_wait structure is
allocated on the stack, future invocations to the DMATEST can produce
undesirable results (e.g., corrupted spinlocks).
Commit
a9df21e34b42 ("dmaengine: dmatest: warn user when dma test times
out") attempted to WARN the user that the stack was likely corrupted but
did not fix the actual issue.
This patch fixes the issue by pushing the wait queue and callback
structs into the the thread structure. If a failure occurs due to time,
dmaengine_terminate_all will force the callback to safely call
wake_up_all() without possibility of using a freed pointer.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605
Fixes:
adfa543e7314 ("dmatest: don't use set_freezable_with_signal()")
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Suggested-by: Shunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Lechner [Mon, 4 Dec 2017 01:54:41 +0000 (19:54 -0600)]
eeprom: at24: change nvmem stride to 1
commit
7f6d2ecd3d7acaf205ea7b3e96f9ffc55b92298b upstream.
Trying to read the MAC address from an eeprom that has an offset that
is not a multiple of 4 causes an error currently.
Fix it by changing the nvmem stride to 1.
Signed-off-by: David Lechner <david@lechnology.com>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt [Sat, 2 Dec 2017 18:04:54 +0000 (13:04 -0500)]
sched/rt: Do not pull from current CPU if only one CPU to pull
commit
f73c52a5bcd1710994e53fbccc378c42b97a06b6 upstream.
Daniel Wagner reported a crash on the BeagleBone Black SoC.
This is a single CPU architecture, and does not have a functional
arch_send_call_function_single_ipi() implementation which can crash
the kernel if that is called.
As it only has one CPU, it shouldn't be called, but if the kernel is
compiled for SMP, the push/pull RT scheduling logic now calls it for
irq_work if the one CPU is overloaded, it can use that function to call
itself and crash the kernel.
Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system
only has a single CPU. But SCHED_FEAT is a constant if sched debugging
is turned off. Another fix can also be used, and this should also help
with normal SMP machines. That is, do not initiate the pull code if
there's only one RT overloaded CPU, and that CPU happens to be the
current CPU that is scheduling in a lower priority task.
Even on a system with many CPUs, if there's many RT tasks waiting to
run on a single CPU, and that CPU schedules in another RT task of lower
priority, it will initiate the PULL logic in case there's a higher
priority RT task on another CPU that is waiting to run. But if there is
no other CPU with waiting RT tasks, it will initiate the RT pull logic
on itself (as it still has RT tasks waiting to run). This is a wasted
effort.
Not only does this help with SMP code where the current CPU is the only
one with RT overloaded tasks, it should also solve the issue that
Daniel encountered, because it will prevent the PULL logic from
executing, as there's only one CPU on the system, and the check added
here will cause it to exit the RT pull code.
Reported-by: Daniel Wagner <wagi@monom.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Fixes:
4bdced5c9 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scott Mayhew [Fri, 8 Dec 2017 21:00:12 +0000 (16:00 -0500)]
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
commit
dc4fd9ab01ab379ae5af522b3efd4187a7c30a31 upstream.
If there were no commit requests, then nfs_commit_inode() should not
wait on the commit or mark the inode dirty, otherwise the following
BUG_ON can be triggered:
[ 1917.130762] kernel BUG at fs/inode.c:578!
[ 1917.130766] Oops: Exception in kernel mode, sig: 5 [#1]
[ 1917.130768] SMP NR_CPUS=2048 NUMA pSeries
[ 1917.130772] Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi blocklayoutdriver rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc sg nx_crypto pseries_rng ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_common ibmvscsi scsi_transport_srp ibmveth scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 1917.130805] CPU: 2 PID: 14923 Comm: umount.nfs4 Tainted: G ------------ T 3.10.0-768.el7.ppc64 #1
[ 1917.130810] task:
c0000005ecd88040 ti:
c00000004cea0000 task.ti:
c00000004cea0000
[ 1917.130813] NIP:
c000000000354178 LR:
c000000000354160 CTR:
c00000000012db80
[ 1917.130816] REGS:
c00000004cea3720 TRAP: 0700 Tainted: G ------------ T (3.10.0-768.el7.ppc64)
[ 1917.130820] MSR:
8000000100029032 <SF,EE,ME,IR,DR,RI> CR:
22002822 XER:
20000000
[ 1917.130828] CFAR:
c00000000011f594 SOFTE: 1
GPR00:
c000000000354160 c00000004cea39a0 c0000000014c4700 c0000000018cc750
GPR04:
000000000000c750 80c0000000000000 0600000000000000 04eeb76bea749a03
GPR08:
0000000000000034 c0000000018cc758 0000000000000001 d000000005e619e8
GPR12:
c00000000012db80 c000000007b31200 0000000000000000 0000000000000000
GPR16:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24:
0000000000000000 c000000000dfc3ec 0000000000000000 c0000005eefc02c0
GPR28:
d0000000079dbd50 c0000005b94a02c0 c0000005b94a0250 c0000005b94a01c8
[ 1917.130867] NIP [
c000000000354178] .evict+0x1c8/0x350
[ 1917.130871] LR [
c000000000354160] .evict+0x1b0/0x350
[ 1917.130873] Call Trace:
[ 1917.130876] [
c00000004cea39a0] [
c000000000354160] .evict+0x1b0/0x350 (unreliable)
[ 1917.130880] [
c00000004cea3a30] [
c0000000003558cc] .evict_inodes+0x13c/0x270
[ 1917.130884] [
c00000004cea3af0] [
c000000000327d20] .kill_anon_super+0x70/0x1e0
[ 1917.130896] [
c00000004cea3b80] [
d000000005e43e30] .nfs_kill_super+0x20/0x60 [nfs]
[ 1917.130900] [
c00000004cea3c00] [
c000000000328a20] .deactivate_locked_super+0xa0/0x1b0
[ 1917.130903] [
c00000004cea3c80] [
c00000000035ba54] .cleanup_mnt+0xd4/0x180
[ 1917.130907] [
c00000004cea3d10] [
c000000000119034] .task_work_run+0x114/0x150
[ 1917.130912] [
c00000004cea3db0] [
c00000000001ba6c] .do_notify_resume+0xcc/0x100
[ 1917.130916] [
c00000004cea3e30] [
c00000000000a7b0] .ret_from_except_lite+0x5c/0x60
[ 1917.130919] Instruction dump:
[ 1917.130921]
7fc3f378 486734b5 60000000 387f00a0 38800003 4bdcb365 60000000 e95f00a0
[ 1917.130927]
694a0060 7d4a0074 794ad182 694a0001 <
0b0a0000>
892d02a4 2f890000 40de0134
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Nyman [Fri, 8 Dec 2017 16:10:05 +0000 (18:10 +0200)]
xhci: Don't add a virt_dev to the devs array before it's fully allocated
commit
5d9b70f7d52eb14bb37861c663bae44de9521c35 upstream.
Avoid null pointer dereference if some function is walking through the
devs array accessing members of a new virt_dev that is mid allocation.
Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its
members are properly allocated.
issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port
"Quick analysis suggests that xhci_alloc_virt_device() is not mutex
protected. If so, there is a time frame where xhci->devs[slot_id] is set
but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL."
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sukumar Ghorai [Wed, 16 Aug 2017 21:46:55 +0000 (14:46 -0700)]
Bluetooth: btusb: driver to enable the usb-wakeup feature
commit
a0085f2510e8976614ad8f766b209448b385492f upstream.
BT-Controller connected as platform non-root-hub device and
usb-driver initialize such device with wakeup disabled,
Ref. usb_new_device().
At present wakeup-capability get enabled by hid-input device from usb
function driver(e.g. BT HID device) at runtime. Again some functional
driver does not set usb-wakeup capability(e.g LE HID device implement
as HID-over-GATT), and can't wakeup the host on USB.
Most of the device operation (such as mass storage) initiated from host
(except HID) and USB wakeup aligned with host resume procedure. For BT
device, usb-wakeup capability need to enable form btusc driver as a
generic solution for multiple profile use case and required for USB remote
wakeup (in-bus wakeup) while host is suspended. Also usb-wakeup feature
need to enable/disable with HCI interface up and down.
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunfeng Yun [Fri, 8 Dec 2017 16:10:06 +0000 (18:10 +0200)]
usb: xhci: fix TDS for MTK xHCI1.1
commit
72b663a99c074a8d073e7ecdae446cfb024ef551 upstream.
For MTK's xHCI 1.0 or latter, TD size is the number of max
packet sized packets remaining in the TD, not including
this TRB (following spec).
For MTK's xHCI 0.96 and older, TD size is the number of max
packet sized packets remaining in the TD, including this TRB
(not following spec).
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Thu, 30 Nov 2017 03:59:22 +0000 (11:59 +0800)]
ceph: drop negative child dentries before try pruning inode's alias
commit
040d786032bf59002d374b86d75b04d97624005c upstream.
Negative child dentry holds reference on inode's alias, it makes
d_prune_aliases() do nothing.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Thu, 7 Dec 2017 21:16:50 +0000 (14:16 -0700)]
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
commit
be6123df1ea8f01ee2f896a16c2b7be3e4557a5a upstream.
stub_send_ret_submit() handles urb with a potential null transfer_buffer,
when it replays a packet with potential malicious data that could contain
a null buffer. Add a check for the condition when actual_length > 0 and
transfer_buffer is null.
Reported-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Thu, 7 Dec 2017 21:16:48 +0000 (14:16 -0700)]
usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
commit
c6688ef9f29762e65bce325ef4acd6c675806366 upstream.
Harden CMD_SUBMIT path to handle malicious input that could trigger
large memory allocations. Add checks to validate transfer_buffer_length
and number_of_packets to protect against bad input requesting for
unbounded memory allocations. Validate early in get_pipe() and return
failure.
Reported-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Mon, 26 Sep 2016 07:51:18 +0000 (10:51 +0300)]
usb: add helper to extract bits 12:11 of wMaxPacketSize
commit
541b6fe63023f3059cf85d47ff2767a3e42a8e44 upstream.
According to USB Specification 2.0 table 9-4,
wMaxPacketSize is a bitfield. Endpoint's maxpacket
is laid out in bits 10:0. For high-speed,
high-bandwidth isochronous endpoints, bits 12:11
contain a multiplier to tell us how many
transactions we want to try per uframe.
This means that if we want an isochronous endpoint
to issue 3 transfers of 1024 bytes per uframe,
wMaxPacketSize should contain the value:
1024 | (2 << 11)
or 5120 (0x1400). In order to make Host and
Peripheral controller drivers' life easier, we're
adding a helper which returns bits 12:11. Note that
no care is made WRT to checking endpoint type and
gadget's speed. That's left for drivers to handle.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Thu, 7 Dec 2017 21:16:47 +0000 (14:16 -0700)]
usbip: fix stub_rx: get_pipe() to validate endpoint number
commit
635f545a7e8be7596b9b2b6a43cab6bbd5a88e43 upstream.
get_pipe() routine doesn't validate the input endpoint number
and uses to reference ep_in and ep_out arrays. Invalid endpoint
number can trigger BUG(). Range check the epnum and returning
error instead of calling BUG().
Change caller stub_recv_cmd_submit() to handle the get_pipe()
error return.
Reported-by: Secunia Research <vuln@secunia.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Tue, 12 Dec 2017 19:25:13 +0000 (14:25 -0500)]
USB: core: prevent malicious bNumInterfaces overflow
commit
48a4ff1c7bb5a32d2e396b03132d20d552c0eca7 upstream.
A malicious USB device with crafted descriptors can cause the kernel
to access unallocated memory by setting the bNumInterfaces value too
high in a configuration descriptor. Although the value is adjusted
during parsing, this adjustment is skipped in one of the error return
paths.
This patch prevents the problem by setting bNumInterfaces to 0
initially. The existing code already sets it to the proper value
after parsing is complete.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Kozub [Tue, 5 Dec 2017 21:40:04 +0000 (22:40 +0100)]
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
commit
62354454625741f0569c2cbe45b2d192f8fd258e upstream.
There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails
with the following error:
[sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[sda] tag#0 Sense Key : Illegal Request [current]
[sda] tag#0 Add. Sense: Invalid field in cdb
The issue occurs both with UAS (occasionally) and mass storage
(immediately after mounting a FS on a disk in the enclosure).
Enabling US_FL_BROKEN_FUA quirk solves this issue.
This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure
for both UAS and mass storage.
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changbin Du [Thu, 30 Nov 2017 03:39:43 +0000 (11:39 +0800)]
tracing: Allocate mask_str buffer dynamically
commit
90e406f96f630c07d631a021fd4af10aac913e77 upstream.
The default NR_CPUS can be very large, but actual possible nr_cpu_ids
usually is very small. For my x86 distribution, the NR_CPUS is 8192 and
nr_cpu_ids is 4. About 2 pages are wasted.
Most machines don't have so many CPUs, so define a array with NR_CPUS
just wastes memory. So let's allocate the buffer dynamically when need.
With this change, the mutext tracing_cpumask_update_lock also can be
removed now, which was used to protect mask_str.
Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com
Fixes:
36dfe9252bd4c ("ftrace: make use of tracing_cpumask")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Thu, 14 Dec 2017 23:32:38 +0000 (15:32 -0800)]
autofs: fix careless error in recent commit
commit
302ec300ef8a545a7fc7f667e5fd743b091c2eeb upstream.
Commit
ecc0c469f277 ("autofs: don't fail mount for transient error") was
meant to replace an 'if' with a 'switch', but instead added the 'switch'
leaving the case in place.
Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name
Fixes:
ecc0c469f277 ("autofs: don't fail mount for transient error")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Wed, 29 Nov 2017 04:56:59 +0000 (20:56 -0800)]
crypto: salsa20 - fix blkcipher_walk API usage
commit
ecaaab5649781c5a0effdaf298a925063020500e upstream.
When asked to encrypt or decrypt 0 bytes, both the generic and x86
implementations of Salsa20 crash in blkcipher_walk_done(), either when
doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)',
because walk->buffer and walk->page have not been initialized.
The bug is that Salsa20 is calling blkcipher_walk_done() even when
nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to
be called when a nonzero number of bytes have been provided.
The broken code is part of an optimization that tries to make only one
call to salsa20_encrypt_bytes() to process inputs that are not evenly
divisible by 64 bytes. To fix the bug, just remove this "optimization"
and use the blkcipher_walk API the same way all the other users do.
Reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
int algfd, reqfd;
struct sockaddr_alg addr = {
.salg_type = "skcipher",
.salg_name = "salsa20",
};
char key[16] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (void *)&addr, sizeof(addr));
reqfd = accept(algfd, 0, 0);
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
read(reqfd, key, sizeof(key));
}
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes:
eb6f13eb9f81 ("[CRYPTO] salsa20_generic: Fix multi-page processing")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Wed, 29 Nov 2017 02:01:38 +0000 (18:01 -0800)]
crypto: hmac - require that the underlying hash algorithm is unkeyed
commit
af3ff8045bbf3e32f1a448542e73abb4c8ceb6f1 upstream.
Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.
This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not. However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.
Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed. Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.
Here is a reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
int main()
{
int algfd;
struct sockaddr_alg addr = {
.salg_type = "hash",
.salg_name = "hmac(hmac(sha3-512-generic))",
};
char key[4096] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (const struct sockaddr *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, key, sizeof(key));
}
Here was the KASAN report from syzbot:
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline]
BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
Write of size 4096 at addr
ffff8801cca07c40 by task syzkaller076574/3044
CPU: 1 PID: 3044 Comm: syzkaller076574 Not tainted 4.14.0-mm1+ #25
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
memcpy include/linux/string.h:341 [inline]
sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
crypto_shash_update+0xcb/0x220 crypto/shash.c:109
shash_finup_unaligned+0x2a/0x60 crypto/shash.c:151
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
hmac_finup+0x182/0x330 crypto/hmac.c:152
crypto_shash_finup+0xc4/0x120 crypto/shash.c:165
shash_digest_unaligned+0x9e/0xd0 crypto/shash.c:172
crypto_shash_digest+0xc4/0x120 crypto/shash.c:186
hmac_setkey+0x36a/0x690 crypto/hmac.c:66
crypto_shash_setkey+0xad/0x190 crypto/shash.c:64
shash_async_setkey+0x47/0x60 crypto/shash.c:207
crypto_ahash_setkey+0xaf/0x180 crypto/ahash.c:200
hash_setkey+0x40/0x90 crypto/algif_hash.c:446
alg_setkey crypto/af_alg.c:221 [inline]
alg_setsockopt+0x2a1/0x350 crypto/af_alg.c:254
SYSC_setsockopt net/socket.c:1851 [inline]
SyS_setsockopt+0x189/0x360 net/socket.c:1830
entry_SYSCALL_64_fastpath+0x1f/0x96
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 27 Nov 2017 07:16:49 +0000 (23:16 -0800)]
crypto: rsa - fix buffer overread when stripping leading zeroes
commit
d2890c3778b164fde587bc16583f3a1c87233ec5 upstream.
In rsa_get_n(), if the buffer contained all 0's and "FIPS mode" is
enabled, we would read one byte past the end of the buffer while
scanning the leading zeroes. Fix it by checking 'n_sz' before '!*ptr'.
This bug was reachable by adding a specially crafted key of type
"asymmetric" (requires CONFIG_RSA and CONFIG_X509_CERTIFICATE_PARSER).
KASAN report:
BUG: KASAN: slab-out-of-bounds in rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33
Read of size 1 at addr
ffff88003501a708 by task keyctl/196
CPU: 1 PID: 196 Comm: keyctl Not tainted 4.14.0-09238-g1d3b78bbc6e9 #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
rsa_get_n+0x19e/0x1d0 crypto/rsa_helper.c:33
asn1_ber_decoder+0x82a/0x1fd0 lib/asn1_decoder.c:328
rsa_set_pub_key+0xd3/0x320 crypto/rsa.c:278
crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline]
pkcs1pad_set_pub_key+0xae/0x200 crypto/rsa-pkcs1pad.c:117
crypto_akcipher_set_pub_key ./include/crypto/akcipher.h:364 [inline]
public_key_verify_signature+0x270/0x9d0 crypto/asymmetric_keys/public_key.c:106
x509_check_for_self_signed+0x2ea/0x480 crypto/asymmetric_keys/x509_public_key.c:141
x509_cert_parse+0x46a/0x620 crypto/asymmetric_keys/x509_cert_parser.c:129
x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Allocated by task 196:
__do_kmalloc mm/slab.c:3711 [inline]
__kmalloc_track_caller+0x118/0x2e0 mm/slab.c:3726
kmemdup+0x17/0x40 mm/util.c:118
kmemdup ./include/linux/string.h:414 [inline]
x509_cert_parse+0x2cb/0x620 crypto/asymmetric_keys/x509_cert_parser.c:106
x509_key_preparse+0x61/0x750 crypto/asymmetric_keys/x509_public_key.c:174
asymmetric_key_preparse+0xa4/0x150 crypto/asymmetric_keys/asymmetric_type.c:388
key_create_or_update+0x4d4/0x10a0 security/keys/key.c:850
SYSC_add_key security/keys/keyctl.c:122 [inline]
SyS_add_key+0xe8/0x290 security/keys/keyctl.c:62
entry_SYSCALL_64_fastpath+0x1f/0x96
Fixes:
5a7de97309f5 ("crypto: rsa - return raw integers for the ASN.1 parser")
Cc: Tudor Ambarus <tudor-dan.ambarus@nxp.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kaiser [Tue, 17 Oct 2017 20:53:08 +0000 (22:53 +0200)]
mfd: fsl-imx25: Clean up irq settings during removal
commit
18f77393796848e68909e65d692c1d1436f06e06 upstream.
When fsl-imx25-tsadc is compiled as a module, loading, unloading and
reloading the module will lead to a crash.
Unable to handle kernel paging request at virtual address
bf005430
[<
c004df6c>] (irq_find_matching_fwspec)
from [<
c028d5ec>] (of_irq_get+0x58/0x74)
[<
c028d594>] (of_irq_get)
from [<
c01ff970>] (platform_get_irq+0x48/0xc8)
[<
c01ff928>] (platform_get_irq)
from [<
bf00e33c>] (mx25_tsadc_probe+0x220/0x2f4 [fsl_imx25_tsadc])
irq_find_matching_fwspec() loops over all registered irq domains. The
irq domain is still registered from last time the module was loaded but
the pointer to its operations is invalid after the module was unloaded.
Add a removal function which clears the irq handler and removes the irq
domain. With this cleanup in place, it's possible to unload and reload
the module.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 16 Dec 2017 15:26:04 +0000 (16:26 +0100)]
Linux 4.9.70
Leon Romanovsky [Wed, 25 Oct 2017 20:10:19 +0000 (23:10 +0300)]
RDMA/cxgb4: Annotate r2 and stag as __be32
[ Upstream commit
7d7d065a5eec7e218174d5c64a9f53f99ffdb119 ]
Chelsio cxgb4 HW is big-endian, hence there is need to properly
annotate r2 and stag fields as __be32 and not __u32 to fix the
following sparse warnings.
drivers/infiniband/hw/cxgb4/qp.c:614:16:
warning: incorrect type in assignment (different base types)
expected unsigned int [unsigned] [usertype] r2
got restricted __be32 [usertype] <noident>
drivers/infiniband/hw/cxgb4/qp.c:615:18:
warning: incorrect type in assignment (different base types)
expected unsigned int [unsigned] [usertype] stag
got restricted __be32 [usertype] <noident>
Cc: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zdenek Kabelac [Wed, 8 Nov 2017 12:44:56 +0000 (13:44 +0100)]
md: free unused memory after bitmap resize
[ Upstream commit
0868b99c214a3d55486c700de7c3f770b7243e7c ]
When bitmap is resized, the old kalloced chunks just are not released
once the resized bitmap starts to use new space.
This fixes in particular kmemleak reports like this one:
unreferenced object 0xffff8f4311e9c000 (size 4096):
comm "lvm", pid 19333, jiffies
4295263268 (age 528.265s)
hex dump (first 32 bytes):
02 80 02 80 02 80 02 80 02 80 02 80 02 80 02 80 ................
02 80 02 80 02 80 02 80 02 80 02 80 02 80 02 80 ................
backtrace:
[<
ffffffffa69471ca>] kmemleak_alloc+0x4a/0xa0
[<
ffffffffa628c10e>] kmem_cache_alloc_trace+0x14e/0x2e0
[<
ffffffffa676cfec>] bitmap_checkpage+0x7c/0x110
[<
ffffffffa676d0c5>] bitmap_get_counter+0x45/0xd0
[<
ffffffffa676d6b3>] bitmap_set_memory_bits+0x43/0xe0
[<
ffffffffa676e41c>] bitmap_init_from_disk+0x23c/0x530
[<
ffffffffa676f1ae>] bitmap_load+0xbe/0x160
[<
ffffffffc04c47d3>] raid_preresume+0x203/0x2f0 [dm_raid]
[<
ffffffffa677762f>] dm_table_resume_targets+0x4f/0xe0
[<
ffffffffa6774b52>] dm_resume+0x122/0x140
[<
ffffffffa6779b9f>] dev_suspend+0x18f/0x290
[<
ffffffffa677a3a7>] ctl_ioctl+0x287/0x560
[<
ffffffffa677a693>] dm_ctl_ioctl+0x13/0x20
[<
ffffffffa62d6b46>] do_vfs_ioctl+0xa6/0x750
[<
ffffffffa62d7269>] SyS_ioctl+0x79/0x90
[<
ffffffffa6956d41>] entry_SYSCALL_64_fastpath+0x1f/0xc2
Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Moore [Fri, 1 Sep 2017 13:44:34 +0000 (09:44 -0400)]
audit: ensure that 'audit=1' actually enables audit for PID 1
[ Upstream commit
173743dd99a49c956b124a74c8aacb0384739a4c ]
Prior to this patch we enabled audit in audit_init(), which is too
late for PID 1 as the standard initcalls are run after the PID 1 task
is forked. This means that we never allocate an audit_context (see
audit_alloc()) for PID 1 and therefore miss a lot of audit events
generated by PID 1.
This patch enables audit as early as possible to help ensure that when
PID 1 is forked it can allocate an audit_context if required.
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keefe Liu [Thu, 9 Nov 2017 12:09:31 +0000 (20:09 +0800)]
ipvlan: fix ipv6 outbound device
[ Upstream commit
ca29fd7cce5a6444d57fb86517589a1a31c759e1 ]
When process the outbound packet of ipv6, we should assign the master
device to output device other than input device.
Signed-off-by: Keefe Liu <liuqifa@huawei.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Thu, 12 Oct 2017 09:22:25 +0000 (18:22 +0900)]
kbuild: do not call cc-option before KBUILD_CFLAGS initialization
[ Upstream commit
433dc2ebe7d17dd21cba7ad5c362d37323592236 ]
Some $(call cc-option,...) are invoked very early, even before
KBUILD_CFLAGS, etc. are initialized.
The returned string from $(call cc-option,...) depends on
KBUILD_CPPFLAGS, KBUILD_CFLAGS, and GCC_PLUGINS_CFLAGS.
Since they are exported, they are not empty when the top Makefile
is recursively invoked.
The recursion occurs in several places. For example, the top
Makefile invokes itself for silentoldconfig. "make tinyconfig",
"make rpm-pkg" are the cases, too.
In those cases, the second call of cc-option from the same line
runs a different shell command due to non-pristine KBUILD_CFLAGS.
To get the same result all the time, KBUILD_* and GCC_PLUGINS_CFLAGS
must be initialized before any call of cc-option. This avoids
garbage data in the .cache.mk file.
Move all calls of cc-option below the config targets because target
compiler flags are unnecessary for Kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Mackerras [Thu, 3 Nov 2016 05:10:55 +0000 (16:10 +1100)]
powerpc/64: Fix checksum folding in csum_tcpudp_nofold and ip_fast_csum_nofold
commit
b492f7e4e07a28e706db26cf4943bb0911435426 upstream.
These functions compute an IP checksum by computing a 64-bit sum and
folding it to 32 bits (the "nofold" in their names refers to folding
down to 16 bits). However, doing (u32) (s + (s >> 32)) is not
sufficient to fold a 64-bit sum to 32 bits correctly. The addition
can produce a carry out from bit 31, which needs to be added in to
the sum to produce the correct result.
To fix this, we copy the from64to32() function from lib/checksum.c
and use that.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 16 Nov 2017 17:58:17 +0000 (17:58 +0000)]
KVM: arm/arm64: vgic-its: Preserve the revious read from the pending table
commit
64afe6e9eb4841f35317da4393de21a047a883b3 upstream.
The current pending table parsing code assumes that we keep the
previous read of the pending bits, but keep that variable in
the current block, making sure it is discarded on each loop.
We end-up using whatever is on the stack. Who knows, it might
just be the right thing...
Fixes:
33d3bc9556a7d ("KVM: arm64: vgic-its: Read initial LPI pending table")
Cc: stable@vger.kernel.org # 4.8
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Tue, 5 Dec 2017 23:27:57 +0000 (23:27 +0000)]
fix kcm_clone()
commit
a5739435b5a3b8c449f8844ecd71a3b1e89f0a33 upstream.
1) it's fput() or sock_release(), not both
2) don't do fd_install() until the last failure exit.
3) not a bug per se, but... don't attach socket to struct file
until it's set up.
Take reserving descriptor into the caller, move fd_install() to the
caller, sanitize failure exits and calling conventions.
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Pelletier [Sun, 26 Nov 2017 06:52:53 +0000 (06:52 +0000)]
usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping
commit
30bf90ccdec1da9c8198b161ecbff39ce4e5a9ba upstream.
Found using DEBUG_ATOMIC_SLEEP while submitting an AIO read operation:
[ 100.853642] BUG: sleeping function called from invalid context at mm/slab.h:421
[ 100.861148] in_atomic(): 1, irqs_disabled(): 1, pid: 1880, name: python
[ 100.867954] 2 locks held by python/1880:
[ 100.867961] #0: (&epfile->mutex){....}, at: [<
f8188627>] ffs_mutex_lock+0x27/0x30 [usb_f_fs]
[ 100.868020] #1: (&(&ffs->eps_lock)->rlock){....}, at: [<
f818ad4b>] ffs_epfile_io.isra.17+0x24b/0x590 [usb_f_fs]
[ 100.868076] CPU: 1 PID: 1880 Comm: python Not tainted 4.14.0-edison+ #118
[ 100.868085] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[ 100.868093] Call Trace:
[ 100.868122] dump_stack+0x47/0x62
[ 100.868156] ___might_sleep+0xfd/0x110
[ 100.868182] __might_sleep+0x68/0x70
[ 100.868217] kmem_cache_alloc_trace+0x4b/0x200
[ 100.868248] ? dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3]
[ 100.868302] dwc3_gadget_ep_alloc_request+0x24/0xe0 [dwc3]
[ 100.868343] usb_ep_alloc_request+0x16/0xc0 [udc_core]
[ 100.868386] ffs_epfile_io.isra.17+0x444/0x590 [usb_f_fs]
[ 100.868424] ? _raw_spin_unlock_irqrestore+0x27/0x40
[ 100.868457] ? kiocb_set_cancel_fn+0x57/0x60
[ 100.868477] ? ffs_ep0_poll+0xc0/0xc0 [usb_f_fs]
[ 100.868512] ffs_epfile_read_iter+0xfe/0x157 [usb_f_fs]
[ 100.868551] ? security_file_permission+0x9c/0xd0
[ 100.868587] ? rw_verify_area+0xac/0x120
[ 100.868633] aio_read+0x9d/0x100
[ 100.868692] ? __fget+0xa2/0xd0
[ 100.868727] ? __might_sleep+0x68/0x70
[ 100.868763] SyS_io_submit+0x471/0x680
[ 100.868878] do_int80_syscall_32+0x4e/0xd0
[ 100.868921] entry_INT80_32+0x2a/0x2a
[ 100.868932] EIP: 0xb7fbb676
[ 100.868941] EFLAGS:
00000292 CPU: 1
[ 100.868951] EAX:
ffffffda EBX:
b7aa2000 ECX:
00000002 EDX:
b7af8368
[ 100.868961] ESI:
b7fbb660 EDI:
b7aab000 EBP:
bfb6c658 ESP:
bfb6c638
[ 100.868973] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Carstens [Mon, 20 Nov 2017 11:38:44 +0000 (12:38 +0100)]
s390: always save and restore all registers on context switch
commit
fbbd7f1a51965b50dd12924841da0d478f3da71b upstream.
The switch_to() macro has an optimization to avoid saving and
restoring register contents that aren't needed for kernel threads.
There is however the possibility that a kernel thread execve's a user
space program. In such a case the execve'd process can partially see
the contents of the previous process, which shouldn't be allowed.
To avoid this, simply always save and restore register contents on
context switch.
Fixes:
fdb6d070effba ("switch_to: dont restore/save access & fpu regs for kernel threads")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masamitsu Yamazaki [Wed, 15 Nov 2017 07:33:14 +0000 (07:33 +0000)]
ipmi: Stop timers before cleaning up the module
commit
4f7f5551a760eb0124267be65763008169db7087 upstream.
System may crash after unloading ipmi_si.ko module
because a timer may remain and fire after the module cleaned up resources.
cleanup_one_si() contains the following processing.
/*
* Make sure that interrupts, the timer and the thread are
* stopped and will not run again.
*/
if (to_clean->irq_cleanup)
to_clean->irq_cleanup(to_clean);
wait_for_timer_and_thread(to_clean);
/*
* Timeouts are stopped, now make sure the interrupts are off
* in the BMC. Note that timers and CPU interrupts are off,
* so no need for locks.
*/
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
poll(to_clean);
schedule_timeout_uninterruptible(1);
}
si_state changes as following in the while loop calling poll(to_clean).
SI_GETTING_MESSAGES
=> SI_CHECKING_ENABLES
=> SI_SETTING_ENABLES
=> SI_GETTING_EVENTS
=> SI_NORMAL
As written in the code comments above,
timers are expected to stop before the polling loop and not to run again.
But the timer is set again in the following process
when si_state becomes SI_SETTING_ENABLES.
=> poll
=> smi_event_handler
=> handle_transaction_done
// smi_info->si_state == SI_SETTING_ENABLES
=> start_getting_events
=> start_new_msg
=> smi_mod_timer
=> mod_timer
As a result, before the timer set in start_new_msg() expires,
the polling loop may see si_state becoming SI_NORMAL
and the module clean-up finishes.
For example, hard LOCKUP and panic occurred as following.
smi_timeout was called after smi_event_handler,
kcs_event and hangs at port_inb()
trying to access I/O port after release.
[exception RIP: port_inb+19]
RIP:
ffffffffc0473053 RSP:
ffff88069fdc3d80 RFLAGS:
00000006
RAX:
ffff8806800f8e00 RBX:
ffff880682bd9400 RCX:
0000000000000000
RDX:
0000000000000ca3 RSI:
0000000000000ca3 RDI:
ffff8806800f8e40
RBP:
ffff88069fdc3d80 R8:
ffffffff81d86dfc R9:
ffffffff81e36426
R10:
00000000000509f0 R11:
0000000000100000 R12:
0000000000]:000000
R13:
0000000000000000 R14:
0000000000000246 R15:
ffff8806800f8e00
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0000
--- <NMI exception stack> ---
To fix the problem I defined a flag, timer_can_start,
as member of struct smi_info.
The flag is enabled immediately after initializing the timer
and disabled immediately before waiting for timer deletion.
Fixes:
0cfec916e86d ("ipmi: Start the timer and thread on internal msgs")
Signed-off-by: Yamazaki Masamitsu <m-yamazaki@ah.jp.nec.com>
[Adjusted for recent changes in the driver.]
[Some fairly major changes went into the IPMI driver in 4.15, so this
required a backport as the code had changed and moved to a different
file. The 4.14 version of this patch moved some code under an
if statement causing it to not apply to 4.7-4.13.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Debabrata Banerjee [Wed, 13 Dec 2017 20:33:37 +0000 (15:33 -0500)]
Fix handling of verdicts after NF_QUEUE
[This fix is only needed for v4.9 stable since v4.10+ does not have the issue]
A verdict of NF_STOLEN after NF_QUEUE will cause an incorrect return value
and a potential kernel panic via double free of skb's
This was broken by commit
7034b566a4e7 ("netfilter: fix nf_queue handling")
and subsequently fixed in v4.10 by commit
c63cbc460419 ("netfilter:
use switch() to handle verdict cases from nf_hook_slow()"). However that
commit cannot be cleanly cherry-picked to v4.9
Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tommi Rantala [Wed, 29 Nov 2017 10:48:42 +0000 (12:48 +0200)]
tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()
[ Upstream commit
c7799c067c2ae33e348508c8afec354f3257ff25 ]
Remove the second tipc_rcv() call in tipc_udp_recv(). We have just
checked that the bearer is not up, and calling tipc_rcv() with a bearer
that is not up leads to a TIPC div-by-zero crash in
tipc_node_calculate_timer(). The crash is rare in practice, but can
happen like this:
We're enabling a bearer, but it's not yet up and fully initialized.
At the same time we receive a discovery packet, and in tipc_udp_recv()
we end up calling tipc_rcv() with the not-yet-initialized bearer,
causing later the div-by-zero crash in tipc_node_calculate_timer().
Jon Maloy explains the impact of removing the second tipc_rcv() call:
"link setup in the worst case will be delayed until the next arriving
discovery messages, 1 sec later, and this is an acceptable delay."
As the tipc_rcv() call is removed, just leave the function via the
rcu_out label, so that we will kfree_skb().
[ 12.590450] Own node address <1.1.1>, network identity 1
[ 12.668088] divide error: 0000 [#1] SMP
[ 12.676952] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.14.2-dirty #1
[ 12.679225] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
[ 12.682095] task:
ffff8c2a761edb80 task.stack:
ffffa41cc0cac000
[ 12.684087] RIP: 0010:tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc]
[ 12.686486] RSP: 0018:
ffff8c2a7fc838a0 EFLAGS:
00010246
[ 12.688451] RAX:
0000000000000000 RBX:
ffff8c2a5b382600 RCX:
0000000000000000
[ 12.691197] RDX:
0000000000000000 RSI:
ffff8c2a5b382600 RDI:
ffff8c2a5b382600
[ 12.693945] RBP:
ffff8c2a7fc838b0 R08:
0000000000000001 R09:
0000000000000001
[ 12.696632] R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8c2a5d8949d8
[ 12.699491] R13:
ffffffff95ede400 R14:
0000000000000000 R15:
ffff8c2a5d894800
[ 12.702338] FS:
0000000000000000(0000) GS:
ffff8c2a7fc80000(0000) knlGS:
0000000000000000
[ 12.705099] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 12.706776] CR2:
0000000001bb9440 CR3:
00000000bd009001 CR4:
00000000003606e0
[ 12.708847] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 12.711016] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 12.712627] Call Trace:
[ 12.713390] <IRQ>
[ 12.714011] tipc_node_check_dest+0x2e8/0x350 [tipc]
[ 12.715286] tipc_disc_rcv+0x14d/0x1d0 [tipc]
[ 12.716370] tipc_rcv+0x8b0/0xd40 [tipc]
[ 12.717396] ? minmax_running_min+0x2f/0x60
[ 12.718248] ? dst_alloc+0x4c/0xa0
[ 12.718964] ? tcp_ack+0xaf1/0x10b0
[ 12.719658] ? tipc_udp_is_known_peer+0xa0/0xa0 [tipc]
[ 12.720634] tipc_udp_recv+0x71/0x1d0 [tipc]
[ 12.721459] ? dst_alloc+0x4c/0xa0
[ 12.722130] udp_queue_rcv_skb+0x264/0x490
[ 12.722924] __udp4_lib_rcv+0x21e/0x990
[ 12.723670] ? ip_route_input_rcu+0x2dd/0xbf0
[ 12.724442] ? tcp_v4_rcv+0x958/0xa40
[ 12.725039] udp_rcv+0x1a/0x20
[ 12.725587] ip_local_deliver_finish+0x97/0x1d0
[ 12.726323] ip_local_deliver+0xaf/0xc0
[ 12.726959] ? ip_route_input_noref+0x19/0x20
[ 12.727689] ip_rcv_finish+0xdd/0x3b0
[ 12.728307] ip_rcv+0x2ac/0x360
[ 12.728839] __netif_receive_skb_core+0x6fb/0xa90
[ 12.729580] ? udp4_gro_receive+0x1a7/0x2c0
[ 12.730274] __netif_receive_skb+0x1d/0x60
[ 12.730953] ? __netif_receive_skb+0x1d/0x60
[ 12.731637] netif_receive_skb_internal+0x37/0xd0
[ 12.732371] napi_gro_receive+0xc7/0xf0
[ 12.732920] receive_buf+0x3c3/0xd40
[ 12.733441] virtnet_poll+0xb1/0x250
[ 12.733944] net_rx_action+0x23e/0x370
[ 12.734476] __do_softirq+0xc5/0x2f8
[ 12.734922] irq_exit+0xfa/0x100
[ 12.735315] do_IRQ+0x4f/0xd0
[ 12.735680] common_interrupt+0xa2/0xa2
[ 12.736126] </IRQ>
[ 12.736416] RIP: 0010:native_safe_halt+0x6/0x10
[ 12.736925] RSP: 0018:
ffffa41cc0cafe90 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffff4d
[ 12.737756] RAX:
0000000000000000 RBX:
ffff8c2a761edb80 RCX:
0000000000000000
[ 12.738504] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
[ 12.739258] RBP:
ffffa41cc0cafe90 R08:
0000014b5b9795e5 R09:
ffffa41cc12c7e88
[ 12.740118] R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000002
[ 12.740964] R13:
ffff8c2a761edb80 R14:
0000000000000000 R15:
0000000000000000
[ 12.741831] default_idle+0x2a/0x100
[ 12.742323] arch_cpu_idle+0xf/0x20
[ 12.742796] default_idle_call+0x28/0x40
[ 12.743312] do_idle+0x179/0x1f0
[ 12.743761] cpu_startup_entry+0x1d/0x20
[ 12.744291] start_secondary+0x112/0x120
[ 12.744816] secondary_startup_64+0xa5/0xa5
[ 12.745367] Code: b9 f4 01 00 00 48 89 c2 48 c1 ea 02 48 3d d3 07 00
00 48 0f 47 d1 49 8b 0c 24 48 39 d1 76 07 49 89 14 24 48 89 d1 31 d2 48
89 df <48> f7 f1 89 c6 e8 81 6e ff ff 5b 41 5c 5d c3 66 90 66 2e 0f 1f
[ 12.747527] RIP: tipc_node_calculate_timer.isra.12+0x45/0x60 [tipc] RSP:
ffff8c2a7fc838a0
[ 12.748555] ---[ end trace
1399ab83390650fd ]---
[ 12.749296] Kernel panic - not syncing: Fatal exception in interrupt
[ 12.750123] Kernel Offset: 0x13200000 from 0xffffffff82000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 12.751215] Rebooting in 60 seconds..
Fixes:
c9b64d492b1f ("tipc: add replicast peer discovery")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-amlogic.git / log