Darshana Padmadas [Sun, 8 Mar 2015 18:03:39 +0000 (23:33 +0530)]
drivers: staging: dgnc: Replace min with min_t
This patch replaces min with min_t and eliminates
the following warning found by checkpatch.pl:
WARNING: min() should probably be min_t(uint, n, 12)
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Sat, 7 Mar 2015 21:03:51 +0000 (00:03 +0300)]
Staging: speakup: Remove unused variable
This patch removes variable that was used to store only the return value of a function call.
The issue was detected and resolved using the following coccinelle script:
@@
expression ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Haneen Mohammed [Sat, 7 Mar 2015 21:02:34 +0000 (00:02 +0300)]
Staging: dgap: Remove unused variable
This patch removes variable that was used to store only the return value of a function call.
The issue was detected and resolved using the following coccinelle script:
@@
expression ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somya Anand [Sat, 7 Mar 2015 18:00:27 +0000 (23:30 +0530)]
staging: rtl8188eu: Remove unneeded parentheses
This patch removes unneeded parentheses from a if statement
for better readability.
This issue is identified by checkpatch.pl
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Somya Anand [Sat, 7 Mar 2015 17:50:01 +0000 (23:20 +0530)]
Staging: iio: Change data type to u16 to avoid unnecessary typecast
In the adis16220_read16bit() function we earlier used a s16 value 'val'
which is used by the adis_read_reg_16 function to read data and takes a
u16 value as a parameter.
So, this patch changes the data type of 'val' from s16 to u16. It is safe
to remove the extra sign extension, since the user of the function uses it
to read a 10 unsigned value which will lead to the same result in both cases.
Further this patch removes the unnecessary typecast for the simplification of
code. In addition to this, initialization of 'val' to 0 is also dropped. This is
due to the fact that not initializing helps the compiler provide useful warnings
if the code gets changed to return an otherwise uninitialized result.
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 9 Mar 2015 07:13:01 +0000 (08:13 +0100)]
Merge 4.0-rc3 into staging-next
We want the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 8 Mar 2015 23:09:09 +0000 (16:09 -0700)]
Linux 4.0-rc3
Al Viro [Sat, 7 Mar 2015 21:08:46 +0000 (21:08 +0000)]
sunrpc: fix braino in ->poll()
POLL_OUT isn't what callers of ->poll() are expecting to see; it's
actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap
bit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Cc: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 8 Mar 2015 19:47:18 +0000 (12:47 -0700)]
Merge tag 'usb-4.0-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here's a round of USB fixes for 4.0-rc3.
Nothing major, the usual gadget, xhci and usb-serial fixes and a few
new device ids as well.
All have been in linux-next successfully"
* tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits)
xhci: Workaround for PME stuck issues in Intel xhci
xhci: fix reporting of 0-sized URBs in control endpoint
usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards
USB: ch341: set tty baud speed according to tty struct
USB: serial: cp210x: Adding Seletek device id's
USB: pl2303: disable break on shutdown
USB: mxuport: fix null deref when used as a console
USB: serial: clean up bus probe error handling
USB: serial: fix port attribute-creation race
USB: serial: fix tty-device error handling at probe
USB: serial: fix potential use-after-free after failed probe
USB: console: add dummy __module_get
USB: ftdi_sio: add PIDs for Actisense USB devices
Revert "USB: serial: make bulk_out_size a lower limit"
cdc-acm: Add support for Denso cradle CU-321
usb-storage: support for more than 8 LUNs
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539
USB: usbfs: don't leak kernel data in siginfo
xhci: Clear the host side toggle manually when endpoint is 'soft reset'
xhci: Allocate correct amount of scratchpad buffers
...
Linus Torvalds [Sun, 8 Mar 2015 19:25:40 +0000 (12:25 -0700)]
Merge tag 'tty-4.0-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for 4.0-rc3.
Along with the atime fix that you know about, here are some other
serial driver bugfixes as well. Most notable is a wait_until_sent
bugfix that was traced back to being around since before 2.6.12 that
Johan has fixed up.
All have been in linux-next successfully"
* tag 'tty-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
TTY: fix tty_wait_until_sent maximum timeout
TTY: fix tty_wait_until_sent on 64-bit machines
USB: serial: fix infinite wait_until_sent timeout
TTY: bfin_jtag_comm: remove incorrect wait_until_sent operation
net: irda: fix wait_until_sent poll timeout
serial: uapi: Declare all userspace-visible io types
serial: core: Fix iotype userspace breakage
serial: sprd: Fix missing spin_unlock in sprd_handle_irq()
console: Fix console name size mismatch
tty: fix up atime/mtime mess, take four
serial: 8250_dw: Fix get_mctrl behaviour
serial:8250:8250_pci: delete unneeded quirk entries
serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S
Change email address for 8250_pci
serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO"
Revert "tty/serial: of_serial: add DT alias ID handling"
Linus Torvalds [Sun, 8 Mar 2015 19:20:10 +0000 (12:20 -0700)]
Merge tag 'staging-4.0-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some IIO and staging driver fixes for 4.0-rc3.
Details are in the shortlog, nothing major, mostly IIO fixes for
reported issues.
All have been in linux-next successfully"
* tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
staging: comedi: adv_pci1710: fix AI INSN_READ for non-zero channel
staging: comedi: vmk80xx: remove "firmware version" kernel messages
staging: comedi: comedi_isadma: fix "stalled" detect in comedi_isadma_disable_on_sample()
iio: ak8975: fix AK09911 dependencies
iio: common: ssp_sensors: Protect PM-only functions to kill warning
IIO: si7020: Allocate correct amount of memory in devm_iio_device_alloc
Revert "iio:humidity:si7020: fix pointer to i2c client"
iio: light: gp2ap020a00f: Select REGMAP_I2C
iio: light: jsa1212: Select REGMAP_I2C
iio: ad5686: fix optional reference voltage declaration
iio:adc:mcp3422 Fix incorrect scales table
iio: mxs-lradc: fix iio channel map regression
iio: imu: adis16400: Fix sign extension
staging: iio: ad2s1200: Fix sign extension
iio: mxs-lradc: only update the buffer when its conversions have finished
iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions
iio: mxs-lradc: make ADC reads not disable touchscreen interrupts
iio: mxs-lradc: separate touchscreen and buffer virtual channels
iio: imu: inv_mpu6050: Prevent dereferencing NULL
iio: iadc: wait_for_completion_timeout time in jiffies
...
Linus Torvalds [Sun, 8 Mar 2015 19:15:47 +0000 (12:15 -0700)]
Merge tag 'char-misc-4.0-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two char/misc fixes for 4.0-rc3.
One is a reported binder driver fix needed due to a change in the mm
core that happened in 4.0-rc1. Another is a mei driver fix that
resolves a reported issue in that driver.
Both have been in linux-next for a while"
* tag 'char-misc-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: make device disabled on stop unconditionally
android: binder: fix binder mmap failures
Linus Torvalds [Sun, 8 Mar 2015 18:51:04 +0000 (11:51 -0700)]
Merge tag 'cc-4.0-rc2' of git://git./linux/kernel/git/gregkh/char-misc
Pull "code of conflict" from Greg KH:
"This file tries to set the rational basis for our code reviews, gives
some advice on how to conduct them, and provides an excalation channel
for any kernel developers if they so desire it"
[ Let's see how this works ]
* tag 'cc-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Code of Conflict
Linus Torvalds [Sat, 7 Mar 2015 19:56:30 +0000 (11:56 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of updates and bugfixes for the new designware-baytrail driver.
And a documentation bugfix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: add required clocks property to binding
i2c: designware-baytrail: baytrail_i2c_acquire() might sleep
i2c: designware-baytrail: cross-check lock functions
i2c: designware-baytrail: fix sparse warnings
i2c: designware-baytrail: fix typo in error path
i2c: designware-baytrail: describe magic numbers
Linus Torvalds [Sat, 7 Mar 2015 19:52:03 +0000 (11:52 -0800)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
"This contains small fixes spread across the drivers"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: mmp_pdma: fix warning about slave caps
dmaengine: qcom_bam_dma: fix wrong register offsets
dmaengine: bam-dma: fix a warning about missing capabilities
dmaengine: ioatdma: workaround for incorrect DMACAP register
dmaengine: at_xdmac: fix for chan conf simplification
dmaengine: dw: don't handle interrupt when dmaengine is not used
dma: mmp-tdma: refine dma disable and dma-pos update
dmaengine: shdma: Move DMA stop to (runtime) suspend callbacks
dmaenegine: mmp-pdma: fix irq handler overwrite physical chan issue
Linus Torvalds [Sat, 7 Mar 2015 19:31:17 +0000 (11:31 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"arm64 and generic kernel/module.c (acked by Rusty) fixes for
CONFIG_DEBUG_SET_MODULE_RONX"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kernel/module.c: Update debug alignment after symtable generation
arm64: Don't use is_module_addr in setting page attributes
Johan Hovold [Wed, 4 Mar 2015 09:39:07 +0000 (10:39 +0100)]
TTY: fix tty_wait_until_sent maximum timeout
Currently tty_wait_until_sent may take up to twice as long as the
requested timeout while waiting for driver and hardware buffers to
drain.
Fix this by taking the remaining number of jiffies after waiting for
driver buffers to drain into account so that the timeout actually
becomes a maximum timeout as it is documented to be.
Note that this specifically implies tighter timings when closing a port
as a consequence of actually honouring the port closing-wait setting
for drivers relying on tty_wait_until_sent_from_close (e.g. via
tty_port_close_start).
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 4 Mar 2015 09:39:06 +0000 (10:39 +0100)]
TTY: fix tty_wait_until_sent on 64-bit machines
Fix overflow bug in tty_wait_until_sent on 64-bit machines, where an
infinite timeout (0) would be passed to the underlying tty-driver's
wait_until_sent-operation as a negative timeout (-1), causing it to
return immediately.
This manifests itself for example as tcdrain() returning immediately,
drivers not honouring the drain flags when setting terminal attributes,
or even dropped data on close as a requested infinite closing-wait
timeout would be ignored.
The first symptom was reported by Asier LLANO who noted that tcdrain()
returned prematurely when using the ftdi_sio usb-serial driver.
Fix this by passing 0 rather than MAX_SCHEDULE_TIMEOUT (LONG_MAX) to the
underlying tty driver.
Note that the serial-core wait_until_sent-implementation is not affected
by this bug due to a lucky chance (comparison to an unsigned maximum
timeout), and neither is the cyclades one that had an explicit check for
negative timeouts, but all other tty drivers appear to be affected.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org> # v2.6.12
Reported-by: ZIV-Asier Llano Palacios <asier.llano@cgglobal.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 4 Mar 2015 09:39:05 +0000 (10:39 +0100)]
USB: serial: fix infinite wait_until_sent timeout
Make sure to handle an infinite timeout (0).
Note that wait_until_sent is currently never called with a 0-timeout
argument due to a bug in tty_wait_until_sent.
Fixes:
dcf010503966 ("USB: serial: add generic wait_until_sent
implementation")
Cc: stable <stable@vger.kernel.org> # v3.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 4 Mar 2015 09:39:04 +0000 (10:39 +0100)]
TTY: bfin_jtag_comm: remove incorrect wait_until_sent operation
Remove incorrect and redundant wait_until_sent operation, which waits
for the driver buffer rather than any hardware buffers to drain,
something which is already taken care of by the tty layer (and
chars_in_buffer).
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 4 Mar 2015 09:39:03 +0000 (10:39 +0100)]
net: irda: fix wait_until_sent poll timeout
In case an infinite timeout (0) is requested, the irda wait_until_sent
implementation would use a zero poll timeout rather than the default
200ms.
Note that wait_until_sent is currently never called with a 0-timeout
argument due to a bug in tty_wait_until_sent.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org> # v2.6.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Hurley [Sun, 1 Mar 2015 15:24:28 +0000 (10:24 -0500)]
serial: uapi: Declare all userspace-visible io types
ioctl(TIOCGSERIAL|TIOCSSERIAL) report and can change the port->iotype.
UART drivers use the UPIO_* definitions, but the uapi header defines
parallel values and userspace uses these parallel values for ioctls;
thus the userspace values are definitive.
Define UPIO_* iotypes in terms of the uapi defines, SERIAL_IO_*;
extend the uapi defines to include all values in use by the serial
core.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Hurley [Sun, 1 Mar 2015 15:18:16 +0000 (10:18 -0500)]
serial: core: Fix iotype userspace breakage
commit
3ffb1a8193bea ("serial: core: Add big-endian iotype")
re-numbered userspace-dependent values; ioctl(TIOCSSERIAL) can
assign the port iotype (which is expected to match the selected
i/o accessors), so iotype values must not be changed.
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Axel Lin [Mon, 16 Feb 2015 14:39:04 +0000 (22:39 +0800)]
serial: sprd: Fix missing spin_unlock in sprd_handle_irq()
Fix return from sprd_handle_irq() with spin_lock held.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Hurley [Sun, 1 Mar 2015 15:11:05 +0000 (10:11 -0500)]
console: Fix console name size mismatch
commit
6ae9200f2cab7 ("enlarge console.name") increased the storage
for the console name to 16 bytes, but not the corresponding
struct console_cmdline::name storage. Console names longer than
8 bytes cause read beyond end-of-string and failure to match
console; I'm not sure if there are other unexpected consequences.
Cc: <stable@vger.kernel.org> # 2.6.22+
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Fri, 27 Feb 2015 17:40:31 +0000 (18:40 +0100)]
tty: fix up atime/mtime mess, take four
This problem was taken care of three times already in
*
b0de59b5733d18b0d1974a060860a8b5c1b36a2e (TTY: do not update
atime/mtime on read/write),
*
37b7f3c76595e23257f61bd80b223de8658617ee (TTY: fix atime/mtime
regression), and
*
b0b885657b6c8ef63a46bc9299b2a7715d19acde (tty: fix up atime/mtime
mess, take three)
But it still misses one point. As John Paul correctly points out, we
do not care about setting date. If somebody ever changes wall
time backwards (by mistake for example), tty timestamps are never
updated until the original wall time passes.
So check the absolute difference of times and if it large than "8
seconds or so", always update the time. That means we will update
immediatelly when changing time. Ergo, CAP_SYS_TIME can foul the
check, but it was always that way.
Thanks John for serving me this so nicely debugged.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: John Paul Perry <john_paul.perry@alcatel-lucent.com>
Cc: <stable@vger.kernel.org> # all, as b0b885657 was backported
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Desmond Liu [Fri, 27 Feb 2015 00:35:57 +0000 (16:35 -0800)]
serial: 8250_dw: Fix get_mctrl behaviour
Fixed behaviour of get_mctrl() serial driver function as documented in:
https://www.kernel.org/doc/Documentation/serial/driver
Added device-tree properties 'dcd-override', 'dsr-override',
'cts-override', and 'ri-override' specific to the Synopsis 8250
DesignWare UART driver. Allows one to force Data Carrier Detect,
Clear To Send, and Data Set Ready signals to permanently be reported as
active. The Ring indicator can be forced to be reported as inactive.
It is possible that if modem control signalling is enabled on a port
that doesn't have these pins (e.g. - a simple two wire Tx/Rx port), the
driver can hang indefinitely waiting for the state to change. The new
DT properties allow the driver to ignore the state of these pins on
serial ports that don't support them, as recommended in the kernel
documentation.
Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang YanQing [Fri, 6 Mar 2015 17:08:35 +0000 (01:08 +0800)]
serial:8250:8250_pci: delete unneeded quirk entries
These quirk entries have the same effect as default
quirk entry, so we can just delete them.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wang YanQing [Fri, 6 Mar 2015 17:13:03 +0000 (01:13 +0800)]
serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S
Commit
8b5c913f7ee6464849570bacb6bcd9ef0eaf7dce
("serial: 8250_pci: Add WCH CH352 quirk to avoid Xscale detection")
trigger one redundant entry report message.
This patch fix it.
Reported-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Fri, 6 Mar 2015 10:49:21 +0000 (10:49 +0000)]
Change email address for 8250_pci
I'm still receiving reports to my email address, so let's point this
at the linux-serial mailing list instead.
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sebastian Andrzej Siewior [Sun, 15 Feb 2015 17:32:16 +0000 (18:32 +0100)]
serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO"
This reverts commit
0aa525d11859c1a4d5b78fdc704148e2ae03ae13.
The conditional RX-FIFO read seems to cause spurious interrupts and we
see just:
|serial8250: too much work for irq29
The previous behaviour was "default" for decades and Marvell's 88f6282 SoC
might not be the only that relies on it. Therefore the Omap fix is
reverted for now.
Fixes:
0aa525d11859 ("tty: serial: 8250_core: read only RX if there is
something in the FIFO")
Reported-By: Nicolas Schichan <nschichan@freebox.fr>
Debuged-By: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baruch Siach [Mon, 16 Feb 2015 06:27:49 +0000 (08:27 +0200)]
Revert "tty/serial: of_serial: add DT alias ID handling"
This reverts commit
6d01bb9dc82a60580f749062a48cb47cd5caca07.
The exact same code was added in commit
3239fd31d4 (serial: of-serial: fetch
line number from DT) a few lined above. Doing this once should be enough.
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Fri, 6 Mar 2015 01:35:25 +0000 (19:35 -0600)]
staging: fsl-mc: fsl-mc object allocator driver
The fsl-mc object allocator driver manages "allocatable" fsl-mc
objects such as DPBPs, DPMCPs and DPCONs. It provides services to
other fsl-mc drivers to allocate/deallocate these types of objects.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Fri, 6 Mar 2015 01:29:11 +0000 (19:29 -0600)]
staging: fsl-mc: Device driver for FSL-MC DPRC devices
A DPRC (Data Path Resource Container) is an isolation device
that contains a set of DPAA networking devices to be
assigned to an isolation domain (e.g., a virtual machine).
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Fri, 6 Mar 2015 01:29:10 +0000 (19:29 -0600)]
staging: fsl-mc: Freescale Management Complex (fsl-mc) bus driver
Platform device driver that sets up the basic bus infrastructure
for the fsl-mc bus type, including support for adding/removing
fsl-mc devices, register/unregister of fsl-mc drivers, and bus
match support to bind devices to drivers.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
J. German Rivera [Fri, 6 Mar 2015 01:29:09 +0000 (19:29 -0600)]
staging: fsl-mc: Added Freescale Management Complex APIs
APIs to access the Management Complex (MC) hardware
module of Freescale LS2 SoCs. This patch includes
APIs to check the MC firmware version and to manipulate
DPRC objects in the MC.
Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Lambert [Wed, 4 Mar 2015 10:31:53 +0000 (11:31 +0100)]
staging: rts5208: Convert variable from int to bool and propagate the change to function parameters
This patch convert local variables declared as int into booleans.
It also propagates the conversion when these variables were used
as function parameters.
Coccinelle was used to generate this patch.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Lambert [Wed, 4 Mar 2015 10:31:01 +0000 (11:31 +0100)]
staging: rts5208: Convert non-returned local variable to boolean when relevant
This patch was produced using Coccinelle. A simplified version of the
semantic patch is:
@r exists@
identifier f;
local idexpression u8 x;
identifier xname;
@@
f(...) {
...when any
(
x@xname = 1;
|
x@xname = 0;
)
...when any
}
@bad exists@
identifier r.f;
local idexpression u8 r.x
expression e1 != {0, 1}, e2;
@@
f(...) {
...when any
(
x = e1;
|
x + e2
)
...when any
}
@depends on !bad@
identifier r.f;
local idexpression u8 r.x;
identifier r.xname;
@@
f(...) {
...
++ bool xname;
- int xname;
<...
(
x =
- 1
+ true
|
x =
- -1
+ false
)
...>
}
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:50 +0000 (14:24 -0500)]
staging: rtl8723au: Eliminate ODM_SetBBReg()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:49 +0000 (14:24 -0500)]
staging: rtl8723au: odm.c: Further reduce the use of ODM_SetBBReg()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:48 +0000 (14:24 -0500)]
staging: rtl8723au: Eliminate ODM_GetBBReg()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:47 +0000 (14:24 -0500)]
staging: rtl8723au: Get rid of ODM_Read4Byte()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:46 +0000 (14:24 -0500)]
staging: rtl8723au: Remove various ODM_* register access wrappers
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:45 +0000 (14:24 -0500)]
staging: rtl8723au: Eliminate ODM_Write1Byte()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:44 +0000 (14:24 -0500)]
staging: rtl8723au: odm_ConfigBB_PHY_8723A() always issues 32 bit writes
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:43 +0000 (14:24 -0500)]
staging: rtl8723au: odm_ConfigBB_AGC_8723A() always does 32 bit writes
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:42 +0000 (14:24 -0500)]
staging: rtl8723au: odm.c: Use rtl8723au_{read, write}32() for 32 bit register access
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:41 +0000 (14:24 -0500)]
staging: rtl8723au: usb_halinit.c: Use rtl8723au_{read,write}32()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:40 +0000 (14:24 -0500)]
staging: rtl8723au: rtl8723a_phycfg.c: Use proper register read/write functions
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:39 +0000 (14:24 -0500)]
staging: rtl8723au: writeOFDMPowerReg() use rtl8723au_write32()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:38 +0000 (14:24 -0500)]
staging: rtl8723au: Clean up PHY_{Query,Set}BBReg() 32 bit read/writes
This switches pure 32 bit read/writes to use the
rtl8723au_{read,write}32() functions directly.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:37 +0000 (14:24 -0500)]
staging: rtl8723au: Reduce the usage of ODM_[GS]et_BBReg()
The vendor code has at least three different APIs for accessing
registers. One more ugly than the other. This is the start to move
away from ODM_[GS]et_BBReg()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:36 +0000 (14:24 -0500)]
staging: rtl8723au: Remove pointless wrappers around odm_TXPowerTrackingInit()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:35 +0000 (14:24 -0500)]
staging: rtl8723au: Remove a number of unused entries from struct dm_odm_t
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jes Sorensen [Thu, 5 Mar 2015 19:24:34 +0000 (14:24 -0500)]
staging: rtl8723au: Remove unused struct rx_hp
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Belisko [Sat, 28 Feb 2015 20:54:42 +0000 (21:54 +0100)]
staging: iio: hmc5843: Set iio name property in sysfs
Without this change file name for hmc5843 is empty in
/sys/bus/iio/devices/iio\:device*/name
With this change name is reported correctly:
cat /sys/bus/iio/devices/iio\:device*/name
hmc5843
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabio Estevam [Tue, 3 Mar 2015 12:55:43 +0000 (09:55 -0300)]
staging: dgap: Avoid name collision
Building for ARM64 leads to the following build warning:
In file included from drivers/staging/dgap/dgap.c:66:0:
drivers/staging/dgap/dgap.h:124:0: warning: "PCI_IO_SIZE" redefined
#define PCI_IO_SIZE 0x00200000
^
In file included from ./arch/arm64/include/asm/page.h:66:0,
from include/linux/mm_types.h:15,
from include/linux/sched.h:27,
from ./arch/arm64/include/asm/compat.h:25,
from ./arch/arm64/include/asm/stat.h:23,
from include/linux/stat.h:5,
from include/linux/module.h:10,
from drivers/staging/dgap/dgap.c:47:
./arch/arm64/include/asm/memory.h:39:0: note: this is the location of the previous definition
#define PCI_IO_SIZE SZ_16M
^
Use PCI_IO_SIZE_DGAP to avoid the name collision.
Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martyn Welch [Thu, 26 Feb 2015 15:53:11 +0000 (18:53 +0300)]
vme: tsi148: Master windows support USERx and CR/CSR accesses, not slaves
The tsi148 driver is registering the slave images as supporting the "USER"
access modes and CR/CSR access mode rather than the master images as it
should.
Remove the incorrect case entries for these modes from the
tsi148_slave_set() function, stop registering slave_images as supporting
these modes and instead register master windows as supporting these modes.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Kalinkin [Thu, 26 Feb 2015 15:53:10 +0000 (18:53 +0300)]
staging: vme: mmap() support for vme_user
We also make sure that user won't be able to reconfigure the window while it is
mmap'ed.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Kalinkin [Thu, 26 Feb 2015 15:53:09 +0000 (18:53 +0300)]
staging: vme: use image mutex for ioctl()
This implements more granular locking in vme_user_ioctl() by using separate
locks for each devfs device.
This also provides a synchronization between vme_user_read(), vme_user_write()
and vme_user_ioctl().
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matteo Semenzato [Wed, 4 Mar 2015 18:53:10 +0000 (19:53 +0100)]
Staging: rtl8192e: remove assignment of function parameter
This patch removes the assignment of a function parameter that has no
effect.
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Lambert [Thu, 5 Mar 2015 13:12:15 +0000 (14:12 +0100)]
staging: rtl8192e: Remove unnecessary OOM message
This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)
@@
identifier f,print,l;
expression e;
constant char[] c;
@@
e = \(kzalloc\|kmalloc\|devm_kzalloc\|devm_kmalloc\)(...);
if (e == NULL) {
<+...
- print(...,c,...);
... when any
(
goto l;
|
return ...;
)
...+> }
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Sun, 22 Feb 2015 02:53:45 +0000 (18:53 -0800)]
staging: rtl8192x: Remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit
1f33c41c03da ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Sat, 21 Feb 2015 02:14:24 +0000 (18:14 -0800)]
Staging: rtl8192u: ieee80211: dot11d: added parenthesis to RESET_CIE_WATCHDOG macro
Added parenthesis to RESET_CIE_WATCHDOG macro to resolve checkpatch
error.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Fri, 20 Feb 2015 05:54:10 +0000 (21:54 -0800)]
Staging: rtl9182u: r819xU_firmware: Replaced C99 comments with C89
Replaced C99 comments with C89.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Fri, 20 Feb 2015 05:54:09 +0000 (21:54 -0800)]
Staging: rtl8192u: r819xU_firmware: removed commented out assert
Removed an assert that was commented out. The comment provides
no documentation value as rt_status is properly handled.
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tolga Ceylan [Fri, 20 Feb 2015 05:54:08 +0000 (21:54 -0800)]
Staging: rtl8192u: r819xU_firmware: removed commented out variable
Removed commented out variable
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rickard Strandqvist [Sat, 7 Feb 2015 14:56:10 +0000 (15:56 +0100)]
staging: rtl8192u: r8192U_core: Fix driver_info dereference as a null pointer
Fix possible use of use of driver_info as a null pointer in
query_rxdesc_status()
This could happen if stats->RxIs40MHzPacket still has the
default value of zero.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sat, 7 Mar 2015 00:54:22 +0000 (16:54 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Radeon, imx, msm, and i915 fixes.
The msm, imx and i915 ones are fairly run of the mill.
Radeon had some DP audio and posting reads for irq fixes, along with a
fix for 32-bit kernels with new cards, we were using unsigned long to
represent GPU side memory space, but since that changed size on 32 vs
64 cards with lots of VRAM failed, so the change has no effect on
x86-64, just moves to using uint64_t instead"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (35 commits)
drm/msm: kexec fixes
drm/msm/mdp5: fix cursor blending
drm/msm/mdp5: fix cursor ROI
drm/msm/atomic: Don't leak atomic commit object when commit fails
drm/msm/mdp5: Avoid flushing registers when CRTC is disabled
drm/msm: update generated headers (add 6th lm.base entry)
drm/msm/mdp5: fixup "drm/msm: fix fallout of atomic dpms changes"
drm/ttm: device address space != CPU address space
drm/mm: Support 4 GiB and larger ranges
drm/i915: gen4: work around hang during hibernation
drm/i915: Check for driver readyness before handling an underrun interrupt
drm/radeon: fix interlaced modes on DCE8
drm/radeon: fix DRM_IOCTL_RADEON_CS oops
drm/radeon: do a posting read in cik_set_irq
drm/radeon: do a posting read in si_set_irq
drm/radeon: do a posting read in evergreen_set_irq
drm/radeon: do a posting read in r600_set_irq
drm/radeon: do a posting read in rs600_set_irq
drm/radeon: do a posting read in r100_set_irq
radeon/audio: fix DP audio on DCE6
...
Benjamin Romer [Wed, 4 Mar 2015 17:14:26 +0000 (12:14 -0500)]
staging: unisys: remove LOGWRN() macros and uniklog.h
Remove the last set of macros from uniklog.h. Without LOGWRN() and
friends, uniklog.h is empty so we can delete the file itself as well.
This macro was not used a lot but the file was included in many places.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:25 +0000 (12:14 -0500)]
staging: unisys: remove ERRDEV macros
Remove the LOGERR, LOGERRDEV, LOGERRDEVX, LOGERRNAME, LOGORDUMPERR
macros from all the drivers.
In one case the removal of the ERRDRV() changed things such that a macro which
returned a value was needed, but the return value was no longer being used. In
this case the macro was replaced with the contents of the macro, but with the
truth calculation removed so that it would not generate a warning.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:24 +0000 (12:14 -0500)]
staging: unisys: remove LOGVER macro
Remove the LOGVER macro from the drivers entirely.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:23 +0000 (12:14 -0500)]
staging: unisys: remove ASSERT() macro
Remove the ASSERT macro from timskmod.h, and replace its single use with
WARN_ON() instead.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:22 +0000 (12:14 -0500)]
staging: unisys: remove LOGINF macros
Remove the LOGINF, LOGINFDEV, LOGINFDEVX, LOGINFNAME, PRINTKDRV, and
INFODRV macros entirely from the driver set.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Wed, 4 Mar 2015 17:14:21 +0000 (12:14 -0500)]
staging: unisys: remove DBGINF, DBGVER, DEBUGDEV, and DEBUGDRV macros
The messages put out by these macros are for driver debugging and aren't needed
any more, so just remove all use of them, and the macros too.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drew Fustini [Wed, 4 Mar 2015 08:10:11 +0000 (02:10 -0600)]
Staging: fbtft: add header for internal functions
Remove extern keyword from function prototypes to suppress warning from
checkpatch.pl with --strict option: https://lkml.org/lkml/2013/7/23/422
fbtft maintainer Noralf Tronnes advised these functions are internal to
this module & suggested moving these prototypes to new internal.h file.
He also advised fbtft.h file will eventually live in include/linux/fbtft.h
Suggested-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Drew Fustini <pdp7pdp7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 3 Mar 2015 10:51:07 +0000 (16:21 +0530)]
MAINTAINERS: update for sm750fb driver
add myself and Teddy Wang as the Maintainer of the sm750
frame buffer driver.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 3 Mar 2015 10:51:06 +0000 (16:21 +0530)]
staging: sm750fb: add sm750 to staging
sm750 of Silicon Motion is pci-e display controller device and has
features like dual display and 2D acceleration. This patch adds the
driver to staging.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 10 Feb 2015 12:08:40 +0000 (17:38 +0530)]
staging: sm7xxfb: make vgamode static
the variable vgamode is used only in this file and hence can be
safely made as static.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Perches [Sun, 22 Feb 2015 02:53:44 +0000 (18:53 -0800)]
staging: i2o: Remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.
See: commit
1f33c41c03da ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yannick Guerrini [Thu, 26 Feb 2015 16:36:33 +0000 (17:36 +0100)]
staging: rtl8188eu: Fix trivial typos in comments
Change 'disabed' and 'disabel' to 'disabled'
Change 'inviation' to 'invitation'
Change 'negoitation' to 'negotiation'
Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Wed, 11 Feb 2015 11:27:08 +0000 (16:57 +0530)]
staging: panel: initialize lcd if lcd enabled
initialiaze lcd parameters only if lcd is enabled.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudip Mukherjee [Tue, 10 Feb 2015 11:56:02 +0000 (17:26 +0530)]
staging: panel: register driver after checking device
register the driver only if lcd or keypad has been enabled and if
both are disabled then just exit.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matteo Semenzato [Sat, 28 Feb 2015 14:28:15 +0000 (15:28 +0100)]
Staging: vt6655: fix C99 comments
This patch fixes the following warning:
do not use C99 // comments
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex W Slater [Thu, 26 Feb 2015 20:09:26 +0000 (20:09 +0000)]
staging: vt6655: Cleanup C99 comments
Fix checkpatch.pl errors:
"ERROR: do not use C99 // comments"
Signed-off-by: Alex W Slater <alex.slater.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt [Sat, 21 Feb 2015 09:40:02 +0000 (10:40 +0100)]
Staging: vt6655 fix C99 style comments
Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Stankovic [Thu, 12 Feb 2015 21:08:26 +0000 (22:08 +0100)]
staging: vt6655: fix coding style issues in channel.c
Observe the line length limit to make checkpatch.pl happy.
Signed-off-by: Ivan Stankovic <pokemon@fly.srk.fer.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Engelmayer [Wed, 11 Feb 2015 19:33:15 +0000 (20:33 +0100)]
staging: vt6656: Fix possible leak in vnt_download_firmware()
When failing to allocate buffer memory, function vnt_download_firmware() goes
through the wrong exit path and fails to release the already requested
firmware. Thus use the correct cleanup. Detected by Coverity CID 1269128.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Lambert [Tue, 10 Feb 2015 10:42:08 +0000 (11:42 +0100)]
staging: ozwpan: Move code from success handling to error handling
The original version was success handling rather than error handling,
therefore this patch reduces nesting.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Lambert [Tue, 10 Feb 2015 09:24:12 +0000 (10:24 +0100)]
staging: ozwpan: Remove allocation from delaration line
This patch removes allocation from declaration line because
people are known to gloss over declarations.
Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Matt Porter [Tue, 3 Mar 2015 16:57:08 +0000 (11:57 -0500)]
i2c: imx: add required clocks property to binding
A clock specifier is required for i.MX I2C and is
provided in all DTS implementations. Add this to the
list of required properties in the binding.
Signed-off-by: Matt Porter <mporter@konsulko.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Salah Triki [Thu, 5 Mar 2015 02:50:24 +0000 (03:50 +0100)]
Staging: dgnc: Fix checking return value of register_chrdev
The failure code is negative. So check <0 instead of <=0.
Return the failure code instead of -ENXIO.
Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Salah Triki [Sun, 1 Mar 2015 22:18:50 +0000 (23:18 +0100)]
staging: dgnc: fix braces {} are not necessary for single statement blocks
This patch fixes the following checkpatch.pl warning:
braces {} are not necessary for single statement blocks
Signed-off-by: Salah Triki <salah.triki@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Shevchenko [Tue, 10 Feb 2015 17:06:10 +0000 (19:06 +0200)]
i2c: designware-baytrail: baytrail_i2c_acquire() might sleep
This patch marks baytrail_i2c_acquire() that it might sleep. Also it chages
while-loop to do-while and, though it is matter of taste, gives a chance to
check one more time before report a timeout.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Andy Shevchenko [Tue, 10 Feb 2015 17:06:09 +0000 (19:06 +0200)]
i2c: designware-baytrail: cross-check lock functions
It seems the idea behind the cross-check is to prevent acquire semaphore when
there is no release callback and vice versa. Thus, patch fixes a typo.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Andy Shevchenko [Tue, 10 Feb 2015 17:06:08 +0000 (19:06 +0200)]
i2c: designware-baytrail: fix sparse warnings
There is no need to export functions that are used as the callbacks in the
struct dw_i2c_dev. Otherwise we get the following warnings:
drivers/i2c/busses/i2c-designware-baytrail.c:63:5: warning: symbol 'baytrail_i2c_acquire' was not declared. Should it be static?
drivers/i2c/busses/i2c-designware-baytrail.c:114:6: warning: symbol 'baytrail_i2c_release' was not declared. Should it be static?
While here, do few indentation fixes, remove i2c_dw_eval_lock_support() from
functions exported to the modules and redundant assignment of local sem
variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Andy Shevchenko [Tue, 10 Feb 2015 17:06:07 +0000 (19:06 +0200)]
i2c: designware-baytrail: fix typo in error path
It seems we have same message for different return values in get_sem() and
baytrail_i2c_acquire(). I suspect this is just a typo, so this patch fixes it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Andy Shevchenko [Tue, 10 Feb 2015 17:06:06 +0000 (19:06 +0200)]
i2c: designware-baytrail: describe magic numbers
The patch converts hardcoded numerical constants to a named ones.
While here, align the variable name in get_sem() and reset_semaphore().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Matthew Tyler [Fri, 6 Mar 2015 10:09:27 +0000 (18:09 +0800)]
staging:lustre:libcfs: Merge linux-proc.c into module.c
module.c was previously the sole exporter of symbols from linux-proc.c
This patch removes the global symbols by merging the two files
Signed-off-by: Matthew Tyler <matt.tyler@flashics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alberto Pires de Oliveira Neto [Tue, 3 Mar 2015 00:09:48 +0000 (21:09 -0300)]
staging: lustre: space prohibited between function name and open parenthesis '('
This patch fixes checkpatch.pl warning.
WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Alberto Pires de Oliveira Neto <mrpenguin2005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>