Lukasz Majewski [Wed, 25 Sep 2019 09:11:42 +0000 (11:11 +0200)]
spi: Add call to spi_slave_abort() function when spidev driver is released
[ Upstream commit
9f918a728cf86b2757b6a7025e1f46824bfe3155 ]
This change is necessary for spidev devices (e.g. /dev/spidev3.0) working
in the slave mode (like NXP's dspi driver for Vybrid SoC).
When SPI HW works in this mode - the master is responsible for providing
CS and CLK signals. However, when some fault happens - like for example
distortion on SPI lines - the SPI Linux driver needs a chance to recover
from this abnormal situation and prepare itself for next (correct)
transmission.
This change doesn't pose any threat on drivers working in master mode as
spi_slave_abort() function checks if SPI slave mode is supported.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20190925091143.15468-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hauke Mehrtens [Sun, 18 Aug 2019 19:09:20 +0000 (21:09 +0200)]
ath10k: Check if station exists before forwarding tx airtime report
[ Upstream commit
b10f32672946ad638a430cc4289029b7acf8e979 ]
It looks like the FW on QCA9984 already reports the tx airtimes before
the station is added to the peer entry. The peer entry is created in
ath10k_peer_map_event() just with the vdev_id and the ethaddr, but
not with a station entry, this is added later in ath10k_peer_create() in
callbacks from mac80211.
When there is no sta added to the peer entry, this function fails
because it calls ieee80211_sta_register_airtime() with NULL.
This was reported in OpenWrt some time ago:
https://bugs.openwrt.org/index.php?do=details&task_id=2414
This commit should fix this crash:
[ 75.991714] Unable to handle kernel paging request at virtual address
fffff9e8
[ 75.991756] pgd =
c0204000
[ 75.997955] [
fffff9e8] *pgd=
5fdfd861, *pte=
00000000, *ppte=
00000000
[ 76.000537] Internal error: Oops: 37 [#1] SMP ARM
[ 76.006686] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_cake sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32
[ 76.059974] cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4
[ 76.130634] usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat crc32c_generic
[ 76.154772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.132 #0
[ 76.177001] Hardware name: Generic DT based system
[ 76.182990] task:
c0b06d80 task.stack:
c0b00000
[ 76.187832] PC is at ieee80211_sta_register_airtime+0x24/0x148 [mac80211]
[ 76.192211] LR is at ath10k_htt_t2h_msg_handler+0x678/0x10f4 [ath10k_core]
[ 76.199052] pc : [<
bf75bfac>] lr : [<
bf83e8b0>] psr:
a0000113
[ 76.205820] sp :
c0b01d54 ip :
00000002 fp :
bf869c0c
[ 76.211981] r10:
0000003c r9 :
dbdca138 r8 :
00060002
[ 76.217192] r7 :
00000000 r6 :
dabe1150 r5 :
00000000 r4 :
dbdc95c0
[ 76.222401] r3 :
00000000 r2 :
00060002 r1 :
00000000 r0 :
00000000
[ 76.229003] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 76.235509] Control:
10c5787d Table:
5c94006a DAC:
00000051
[ 76.242716] Process swapper/0 (pid: 0, stack limit = 0xc0b00210)
[ 76.248446] Stack: (0xc0b01d54 to 0xc0b02000)
[ 76.254532] 1d40:
dbdc95c0 00000000 dabe1150
[ 76.258808] 1d60:
00000001 dabe1150 dbdca138 0000003c bf869c0c bf83e8b0 00000002 c0314b10
[ 76.266969] 1d80:
dbdc9c70 00000001 00000001 dabe114c 00010000 00000000 dbdcd724 bf88f3d8
[ 76.275126] 1da0:
c0310d28 db393c00 dbdc95c0 00000000 c0b01dd0 c07fb4c4 dbdcd724 00000001
[ 76.283286] 1dc0:
00000022 bf88b09c db393c00 00000022 c0b01dd0 c0b01dd0 00000000 dbdcc5c0
[ 76.291445] 1de0:
bf88f04c dbdcd654 dbdcd71c dbdc95c0 00000014 dbdcd724 dbdcc5c0 00000005
[ 76.299605] 1e00:
0004b400 bf85c360 00000000 bf87101c c0b01e24 00000006 00000000 dbdc95c0
[ 76.307764] 1e20:
00000001 00000040 0000012c c0b01e80 1cf51000 bf85c448 dbdcd440 dbdc95c0
[ 76.315925] 1e40:
dbdca440 ffffa880 00000040 bf88cb68 dbdcd440 00000001 00000040 ffffa880
[ 76.324084] 1e60:
c0b02d00 c06d72e0 dd990080 c0a3f080 c0b255dc c0b047e4 c090afac c090e80c
[ 76.332244] 1e80:
c0b01e80 c0b01e80 c0b01e88 c0b01e88 dd4cc200 00000000 00000003 c0b0208c
[ 76.340405] 1ea0:
c0b02080 40000003 ffffe000 00000100 c0b02080 c03015c8 00000000 00000001
[ 76.348564] 1ec0:
dd408000 c0a38210 c0b2c7c0 0000000a ffffa880 c0b02d00 c07fb764 00200102
[ 76.356723] 1ee0:
dd4cc268 c0a3e414 00000000 00000000 00000001 dd408000 de803000 00000000
[ 76.364883] 1f00:
00000000 c03247cc c0a3e414 c0368f1c c0b03f60 c0b153cc de80200c de802000
[ 76.373042] 1f20:
c0b01f48 c0301488 c0308630 60000013 ffffffff c0b01f7c 00000000 c0b00000
[ 76.381204] 1f40:
00000000 c030c08c 00000001 00000000 00000000 c0315180 ffffe000 c0b03cc0
[ 76.389363] 1f60:
c0b03c70 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98
[ 76.397522] 1f80:
c030862c c0308630 60000013 ffffffff 00000051 00000000 ffffe000 c035dd18
[ 76.405681] 1fa0:
000000bf c0b03c40 00000000 c0b2c000 dddfce80 c035e060 c0b2c040 c0a00cf4
[ 76.413842] 1fc0:
ffffffff ffffffff 00000000 c0a0067c c0a2da28 00000000 00000000 c0b2c1d4
[ 76.422001] 1fe0:
c0b03c5c c0a2da24 c0b07ee0 4220406a 512f04d0 4220807c 00000000 00000000
[ 76.430335] [<
bf75bfac>] (ieee80211_sta_register_airtime [mac80211]) from [<
00000002>] (0x2)
[ 76.438314] Code:
e1cd81f0 e1a08002 e1cda1f8 e58de020 (
e5102618)
[ 76.446965] ---[ end trace
227a38ade964d642 ]---
Fixes:
bb31b7cb106c ("ath10k: report tx airtime provided by fw")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Tsai [Thu, 22 Aug 2019 02:02:13 +0000 (10:02 +0800)]
drm/amd/display: Handle virtual signal type in disable_link()
[ Upstream commit
616f5b65f1c02d3d6ae370644670d14c57de2fd8 ]
[Why]
The new implementation changed the behavior to allow process setMode
to DAL when DAL returns empty mode query for unplugged display.
This will trigger additional disable_link().
When unplug HDMI from MST dock, driver will update stream->signal to
"Virtual". disable_link() will call disable_output() if the signal type
is not DP and induce other displays on MST dock show black screen.
[How]
Don't need to process disable_output() if the signal type is virtual.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenwen Wang [Thu, 15 Aug 2019 21:04:31 +0000 (16:04 -0500)]
ath10k: add cleanup in ath10k_sta_state()
[ Upstream commit
334f5b61a6f29834e881923b98d1e27e5ce9620d ]
If 'sta->tdls' is false, no cleanup is executed, leading to memory/resource
leaks, e.g., 'arsta->tx_stats'. To fix this issue, perform cleanup before
go to the 'exit' label.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mikita Lipski [Fri, 23 Aug 2019 17:26:24 +0000 (13:26 -0400)]
drm/amd/display: Rebuild mapped resources after pipe split
[ Upstream commit
387596ef2859c37d564ce15abddbc9063a132e2c ]
[why]
The issue is specific for linux, as on timings such as 8K@60
or 4K@144 DSC should be working in combination with ODM Combine
in order to ensure that we can run those timings. The validation
for those timings was passing, but when pipe split was happening
second pipe wasn't being programmed.
[how]
Rebuild mapped resources if we split stream for ODM.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian König [Mon, 16 Sep 2019 15:20:47 +0000 (10:20 -0500)]
drm/ttm: return -EBUSY on pipelining with no_gpu_wait (v2)
[ Upstream commit
3084cf46cf8110826a42de8c8ef30e8fa48974c2 ]
Setting the no_gpu_wait flag means that the allocate BO must be available
immediately and we can't wait for any GPU operation to finish.
v2: squash in mem leak fix, rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian König [Mon, 9 Sep 2019 11:57:32 +0000 (13:57 +0200)]
drm/amdgpu: grab the id mgr lock while accessing passid_mapping
[ Upstream commit
6817bf283b2b851095825ec7f0e9f10398e09125 ]
Need to make sure that we actually dropping the right fence.
Could be done with RCU as well, but to complicated for a fix.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Zhang [Tue, 10 Sep 2019 04:29:14 +0000 (12:29 +0800)]
drm/amdgpu/sriov: add ring_stop before ring_create in psp v11 code
[ Upstream commit
51c0f58e9f6af3a387d14608033e6796a7ad90ee ]
psp v11 code missed ring stop in ring create function(VMR)
while psp v3.1 code had the code. This will cause VM destroy1
fail and psp ring create fail.
For SIOV-VF, ring_stop should not be deleted in ring_create
function.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Wilczynski [Fri, 13 Sep 2019 20:24:13 +0000 (22:24 +0200)]
iio: light: bh1750: Resolve compiler warning and make code more readable
[ Upstream commit
f552fde983d378e7339f9ea74a25f918563bf0d3 ]
Separate the declaration of struct bh1750_chip_info from definition
of bh1750_chip_info_tbl[] in a single statement as it makes the code
hard to read, and with the extra newline it makes it look as if the
bh1750_chip_info_tbl[] had no explicit type.
This change also resolves the following compiler warning about the
unusual position of the static keyword that can be seen when building
with warnings enabled (W=1):
drivers/iio/light/bh1750.c:64:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Related to commit
3a11fbb037a1 ("iio: light: add support for ROHM
BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors").
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Merello [Mon, 9 Sep 2019 12:58:17 +0000 (14:58 +0200)]
iio: max31856: add missing of_node and parent references to iio_dev
[ Upstream commit
505ea3ada665c466d0064b11b6e611b7f995517d ]
Adding missing indio_dev->dev.of_node references so that, in case multiple
max31856 are present, users can get some clues to being able to distinguish
each of them. While at it, add also the missing parent reference.
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaehyun Chung [Mon, 19 Aug 2019 20:45:05 +0000 (16:45 -0400)]
drm/amd/display: OTC underflow fix
[ Upstream commit
785908cf19c9eb4803f6bf9c0a7447dc3661d5c3 ]
[Why] Underflow occurs on some display setups(repro'd on 3x4K HDR) on boot,
mode set, and hot-plugs with. Underflow occurs because mem clk
is not set high after disabling pstate switching. This behaviour occurs
because some calculations assumed displays were synchronized.
[How] Add a condition to check if timing sync is disabled so that
synchronized vblank can be set to false.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Masney [Thu, 15 Aug 2019 00:48:46 +0000 (20:48 -0400)]
drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings
[ Upstream commit
2708e876272d89bbbff811d12834adbeef85f022 ]
Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jing Zhou [Thu, 22 Aug 2019 06:26:33 +0000 (14:26 +0800)]
drm/amd/display: verify stream link before link test
[ Upstream commit
b131932215c993ea5adf8192d1de2e8d6b23048d ]
[Why]
DP1.2 LL CTS test failure.
[How]
The failure is caused by not verify stream link is equal
to link, only check stream and link is not null.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Vetter [Wed, 4 Sep 2019 14:39:42 +0000 (16:39 +0200)]
drm: Use EOPNOTSUPP, not ENOTSUPP
[ Upstream commit
c7581a414d28413c1dd6d116d44859b5a52e0950 ]
- it's what we recommend in our docs:
https://dri.freedesktop.org/docs/drm/gpu/drm-uapi.html#recommended-ioctl-return-values
- it's the overwhelmingly used error code for "operation not
supported", at least in drm core (slightly less so in drivers):
$ git grep EOPNOTSUPP -- drivers/gpu/drm/*c | wc -l
83
$ git grep ENOTSUPP -- drivers/gpu/drm/*c | wc -l
5
- include/linux/errno.h makes it fairly clear that these are for nfsv3
(plus they also have error codes above 512, which is the block with
some special behaviour ...)
/* Defined for the NFSv3 protocol */
If the above isn't reflecting current practice, then I guess we should
at least update the docs.
Noralf commented:
Ben Hutchings made this comment[1] in a thread about use of ENOTSUPP in
drivers:
glibc's strerror() returns these strings for ENOTSUPP and EOPNOTSUPP
respectively:
"Unknown error 524"
"Operation not supported"
So at least for errors returned to userspace EOPNOTSUPP makes sense.
José asked:
> Hopefully this will not break any userspace
None of the functions in drm_edid.c affected by this reach userspace,
it's all driver internal.
Same for the mipi function, that error code should be handled by
drivers. Drivers are supposed to remap "the hw is on fire" to EIO when
reporting up to userspace, but I think if a driver sees this it would
be a driver bug.
v2: Augment commit message with comments from Noralf and José
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andres Rodriguez <andresx7@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904143942.31756-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dariusz Marcinkiewicz [Wed, 28 Aug 2019 12:34:15 +0000 (14:34 +0200)]
drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register
[ Upstream commit
71137bfd98973efb7b762ba168df077b87b34311 ]
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.
Changes since v7:
- err_runtime_disable -> err_rpm_disable
Changes since v2:
- removed unnecessary call to invalidate phys address before
deregistering the notifier,
- use cec_notifier_phys_addr_invalidate instead of setting
invalid address on a notifier.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 'if (!hdata->notifier)' instead of '== NULL']
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828123415.139441-1-darekm@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Pinchart [Fri, 23 Aug 2019 19:32:42 +0000 (22:32 +0300)]
drm/panel: Add missing drm_panel_init() in panel drivers
[ Upstream commit
65abbda8ed7ca48c8807d6b04a77431b438fa659 ]
Panels must be initialised with drm_panel_init(). Add the missing
function call in the panel-raspberrypi-touchscreen.c and
panel-sitronix-st7789v.c drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 21 Aug 2019 07:24:56 +0000 (10:24 +0300)]
drm/mipi-dbi: fix a loop in debugfs code
[ Upstream commit
d72cf01f410aa09868d98b672f3f92328c96b32d ]
This code will likely crash if we try to do a zero byte write. The code
looks like this:
/* strip trailing whitespace */
for (i = count - 1; i > 0; i--)
if (isspace(buf[i]))
...
We're writing zero bytes so count = 0. You would think that "count - 1"
would be negative one, but because "i" is unsigned it is a large
positive numer instead. The "i > 0" condition is true and the "buf[i]"
access will be out of bounds.
The fix is to make "i" signed and now everything works as expected. The
upper bound of "count" is capped in __kernel_write() at MAX_RW_COUNT so
we don't have to worry about it being higher than INT_MAX.
Fixes:
02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[noralf: Adjust title]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821072456.GJ26957@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Paul [Thu, 29 Aug 2019 16:52:19 +0000 (12:52 -0400)]
drm: mst: Fix query_payload ack reply struct
[ Upstream commit
268de6530aa18fe5773062367fd119f0045f6e88 ]
Spec says[1] Allocated_PBN is 16 bits
[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98
Fixes:
ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gerd Hoffmann [Thu, 29 Aug 2019 10:32:45 +0000 (12:32 +0200)]
drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper.
[ Upstream commit
29cf12394c0565d7eb1685bf0c1b4749aa6a8b66 ]
Use drm_gem_reservation_object_wait() in virtio_gpu_wait_ioctl().
This also makes the ioctl run lockless.
v9: fix return value.
v5: handle lookup failure.
v2: use reservation_object_test_signaled_rcu for VIRTGPU_WAIT_NOWAIT.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-3-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dariusz Marcinkiewicz [Fri, 23 Aug 2019 11:24:25 +0000 (13:24 +0200)]
drm/vc4/vc4_hdmi: fill in connector info
[ Upstream commit
66c2dee4ae10a2d841c40b9dd9c7141eb23eee76 ]
Fill in the connector info, allowing userspace to associate
the CEC device with the drm connector.
Tested on a Raspberry Pi 3B.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-2-hverkuil-cisco@xs4all.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Fri, 13 Dec 2019 08:51:11 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Fix work handling in delayed HP detection
commit
42fb6b1d41eb5905d77c06cad2e87b70289bdb76 upstream.
CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend. This patch addresses those issues.
Fixes:
15c2b3cc09a3 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 13 Dec 2019 08:51:10 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Avoid endless loop
commit
cb04fc3b6b076f67d228a0b7d096c69ad486c09c upstream.
Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.
Fixes:
a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 13 Dec 2019 08:51:09 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Keep power on during processing DSP response
commit
377bc0cfabce0244632dada19060839ced4e6949 upstream.
We need to keep power on while processing the DSP response via unsol
event. Each snd_hda_codec_read() call does the power management, so
it should work normally, but still it's safer to keep the power up for
the whole function.
Fixes:
a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 11 Dec 2019 15:57:42 +0000 (16:57 +0100)]
ALSA: pcm: Avoid possible info leaks from PCM stream buffers
commit
add9d56d7b3781532208afbff5509d7382fb6efe upstream.
The current PCM code doesn't initialize explicitly the buffers
allocated for PCM streams, hence it might leak some uninitialized
kernel data or previous stream contents by mmapping or reading the
buffer before actually starting the stream.
Since this is a common problem, this patch simply adds the clearance
of the buffer data at hw_params callback. Although this does only
zero-clear no matter which format is used, which doesn't mean the
silence for some formats, but it should be OK because the intention is
just to clear the previous data on the buffer.
Reported-by: Lionel Koenig <lionel.koenig@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191211155742.3213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Fri, 6 Dec 2019 12:27:39 +0000 (12:27 +0000)]
Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues
commit
6609fee8897ac475378388238456c84298bff802 upstream.
When a tree mod log user no longer needs to use the tree it calls
btrfs_put_tree_mod_seq() to remove itself from the list of users and
delete all no longer used elements of the tree's red black tree, which
should be all elements with a sequence number less then our equals to
the caller's sequence number. However the logic is broken because it
can delete and free elements from the red black tree that have a
sequence number greater then the caller's sequence number:
1) At a point in time we have sequence numbers 1, 2, 3 and 4 in the
tree mod log;
2) The task which got assigned the sequence number 1 calls
btrfs_put_tree_mod_seq();
3) Sequence number 1 is deleted from the list of sequence numbers;
4) The current minimum sequence number is computed to be the sequence
number 2;
5) A task using sequence number 2 is at tree_mod_log_rewind() and gets
a pointer to one of its elements from the red black tree through
a call to tree_mod_log_search();
6) The task with sequence number 1 iterates the red black tree of tree
modification elements and deletes (and frees) all elements with a
sequence number less then or equals to 2 (the computed minimum sequence
number) - it ends up only leaving elements with sequence numbers of 3
and 4;
7) The task with sequence number 2 now uses the pointer to its element,
already freed by the other task, at __tree_mod_log_rewind(), resulting
in a use-after-free issue. When CONFIG_DEBUG_PAGEALLOC=y it produces
a trace like the following:
[16804.546854] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[16804.547451] CPU: 0 PID: 28257 Comm: pool Tainted: G W 5.4.0-rc8-btrfs-next-51 #1
[16804.548059] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[16804.548666] RIP: 0010:rb_next+0x16/0x50
(...)
[16804.550581] RSP: 0018:
ffffb948418ef9b0 EFLAGS:
00010202
[16804.551227] RAX:
6b6b6b6b6b6b6b6b RBX:
ffff90e0247f6600 RCX:
6b6b6b6b6b6b6b6b
[16804.551873] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff90e0247f6600
[16804.552504] RBP:
ffff90dffe0d4688 R08:
0000000000000001 R09:
0000000000000000
[16804.553136] R10:
ffff90dffa4a0040 R11:
0000000000000000 R12:
000000000000002e
[16804.553768] R13:
ffff90e0247f6600 R14:
0000000000001663 R15:
ffff90dff77862b8
[16804.554399] FS:
00007f4b197ae700(0000) GS:
ffff90e036a00000(0000) knlGS:
0000000000000000
[16804.555039] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[16804.555683] CR2:
00007f4b10022000 CR3:
00000002060e2004 CR4:
00000000003606f0
[16804.556336] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[16804.556968] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[16804.557583] Call Trace:
[16804.558207] __tree_mod_log_rewind+0xbf/0x280 [btrfs]
[16804.558835] btrfs_search_old_slot+0x105/0xd00 [btrfs]
[16804.559468] resolve_indirect_refs+0x1eb/0xc70 [btrfs]
[16804.560087] ? free_extent_buffer.part.19+0x5a/0xc0 [btrfs]
[16804.560700] find_parent_nodes+0x388/0x1120 [btrfs]
[16804.561310] btrfs_check_shared+0x115/0x1c0 [btrfs]
[16804.561916] ? extent_fiemap+0x59d/0x6d0 [btrfs]
[16804.562518] extent_fiemap+0x59d/0x6d0 [btrfs]
[16804.563112] ? __might_fault+0x11/0x90
[16804.563706] do_vfs_ioctl+0x45a/0x700
[16804.564299] ksys_ioctl+0x70/0x80
[16804.564885] ? trace_hardirqs_off_thunk+0x1a/0x20
[16804.565461] __x64_sys_ioctl+0x16/0x20
[16804.566020] do_syscall_64+0x5c/0x250
[16804.566580] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[16804.567153] RIP: 0033:0x7f4b1ba2add7
(...)
[16804.568907] RSP: 002b:
00007f4b197adc88 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[16804.569513] RAX:
ffffffffffffffda RBX:
00007f4b100210d8 RCX:
00007f4b1ba2add7
[16804.570133] RDX:
00007f4b100210d8 RSI:
00000000c020660b RDI:
0000000000000003
[16804.570726] RBP:
000055de05a6cfe0 R08:
0000000000000000 R09:
00007f4b197add44
[16804.571314] R10:
0000000000000000 R11:
0000000000000246 R12:
00007f4b197add48
[16804.571905] R13:
00007f4b197add40 R14:
00007f4b100210d0 R15:
00007f4b197add50
(...)
[16804.575623] ---[ end trace
87317359aad4ba50 ]---
Fix this by making btrfs_put_tree_mod_seq() skip deletion of elements that
have a sequence number equals to the computed minimum sequence number, and
not just elements with a sequence number greater then that minimum.
Fixes:
bd989ba359f2ac ("Btrfs: add tree modification log functions")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 6 Dec 2019 16:39:00 +0000 (11:39 -0500)]
btrfs: handle ENOENT in btrfs_uuid_tree_iterate
commit
714cd3e8cba6841220dce9063a7388a81de03825 upstream.
If we get an -ENOENT back from btrfs_uuid_iter_rem when iterating the
uuid tree we'll just continue and do btrfs_next_item(). However we've
done a btrfs_release_path() at this point and no longer have a valid
path. So increment the key and go back and do a normal search.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 6 Dec 2019 14:37:18 +0000 (09:37 -0500)]
btrfs: do not leak reloc root if we fail to read the fs root
commit
ca1aa2818a53875cfdd175fb5e9a2984e997cce9 upstream.
If we fail to read the fs root corresponding with a reloc root we'll
just break out and free the reloc roots. But we remove our current
reloc_root from this list higher up, which means we'll leak this
reloc_root. Fix this by adding ourselves back to the reloc_roots list
so we are properly cleaned up.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 6 Dec 2019 14:37:17 +0000 (09:37 -0500)]
btrfs: skip log replay on orphaned roots
commit
9bc574de590510eff899c3ca8dbaf013566b5efe upstream.
My fsstress modifications coupled with generic/475 uncovered a failure
to mount and replay the log if we hit a orphaned root. We do not want
to replay the log for an orphan root, but it's completely legitimate to
have an orphaned root with a log attached. Fix this by simply skipping
replaying the log. We still need to pin it's root node so that we do
not overwrite it while replaying other logs, as we re-read the log root
at every stage of the replay.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 6 Dec 2019 14:37:15 +0000 (09:37 -0500)]
btrfs: abort transaction after failed inode updates in create_subvol
commit
c7e54b5102bf3614cadb9ca32d7be73bad6cecf0 upstream.
We can just abort the transaction here, and in fact do that for every
other failure in this function except these two cases.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anand Jain [Thu, 5 Dec 2019 11:39:07 +0000 (19:39 +0800)]
btrfs: send: remove WARN_ON for readonly mount
commit
fbd542971aa1e9ec33212afe1d9b4f1106cd85a1 upstream.
We log warning if root::orphan_cleanup_state is not set to
ORPHAN_CLEANUP_DONE in btrfs_ioctl_send(). However if the filesystem is
mounted as readonly we skip the orphan item cleanup during the lookup
and root::orphan_cleanup_state remains at the init state 0 instead of
ORPHAN_CLEANUP_DONE (2). So during send in btrfs_ioctl_send() we hit the
warning as below.
WARN_ON(send_root->orphan_cleanup_state != ORPHAN_CLEANUP_DONE);
WARNING: CPU: 0 PID: 2616 at /Volumes/ws/btrfs-devel/fs/btrfs/send.c:7090 btrfs_ioctl_send+0xb2f/0x18c0 [btrfs]
::
RIP: 0010:btrfs_ioctl_send+0xb2f/0x18c0 [btrfs]
::
Call Trace:
::
_btrfs_ioctl_send+0x7b/0x110 [btrfs]
btrfs_ioctl+0x150a/0x2b00 [btrfs]
::
do_vfs_ioctl+0xa9/0x620
? __fget+0xac/0xe0
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x49/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reproducer:
mkfs.btrfs -fq /dev/sdb
mount /dev/sdb /btrfs
btrfs subvolume create /btrfs/sv1
btrfs subvolume snapshot -r /btrfs/sv1 /btrfs/ss1
umount /btrfs
mount -o ro /dev/sdb /btrfs
btrfs send /btrfs/ss1 -f /tmp/f
The warning exists because having orphan inodes could confuse send and
cause it to fail or produce incorrect streams. The two cases that would
cause such send failures, which are already fixed are:
1) Inodes that were unlinked - these are orphanized and remain with a
link count of 0. These caused send operations to fail because it
expected to always find at least one path for an inode. However this
is no longer a problem since send is now able to deal with such
inodes since commit
46b2f4590aab ("Btrfs: fix send failure when root
has deleted files still open") and treats them as having been
completely removed (the state after an orphan cleanup is performed).
2) Inodes that were in the process of being truncated. These resulted in
send not knowing about the truncation and potentially issue write
operations full of zeroes for the range from the new file size to the
old file size. This is no longer a problem because we no longer
create orphan items for truncation since commit
f7e9e8fc792f ("Btrfs:
stop creating orphan items for truncate").
As such before these commits, the WARN_ON here provided a clue in case
something went wrong. Instead of being a warning against the
root::orphan_cleanup_state value, it could have been more accurate by
checking if there were actually any orphan items, and then issue a
warning only if any exists, but that would be more expensive to check.
Since orphanized inodes no longer cause problems for send, just remove
the warning.
Reported-by: Christoph Anton Mitterer <calestyo@scientia.net>
Link: https://lore.kernel.org/linux-btrfs/21cb5e8d059f6e1496a903fa7bfc0a297e2f5370.camel@scientia.net/
CC: stable@vger.kernel.org # 4.19+
Suggested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Thu, 5 Dec 2019 16:58:30 +0000 (16:58 +0000)]
Btrfs: fix missing data checksums after replaying a log tree
commit
40e046acbd2f369cfbf93c3413639c66514cec2d upstream.
When logging a file that has shared extents (reflinked with other files or
with itself), we can end up logging multiple checksum items that cover
overlapping ranges. This confuses the search for checksums at log replay
time causing some checksums to never be added to the fs/subvolume tree.
Consider the following example of a file that shares the same extent at
offsets 0 and 256Kb:
[ bytenr
13893632, offset 64Kb, len 64Kb ]
0 64Kb
[ bytenr
13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr
13893632, offset 0, len 256Kb ]
256Kb 512Kb
When logging the inode, at tree-log.c:copy_items(), when processing the
file extent item at offset 0, we log a checksum item covering the range
13959168 to
14024704, which corresponds to
13893632 + 64Kb and
13893632 +
64Kb + 64Kb, respectively.
Later when processing the extent item at offset 256K, we log the checksums
for the range from
13893632 to
14155776 (which corresponds to
13893632 +
256Kb). These checksums get merged with the checksum item for the range
from
13631488 to
13893632 (
13631488 + 256Kb), logged by a previous fsync.
So after this we get the two following checksum items in the log tree:
(...)
item 6 key (EXTENT_CSUM EXTENT_CSUM
13631488) itemoff 3095 itemsize 512
range start
13631488 end
14155776 length 524288
item 7 key (EXTENT_CSUM EXTENT_CSUM
13959168) itemoff 3031 itemsize 64
range start
13959168 end
14024704 length 65536
The first one covers the range from the second one, they overlap.
So far this does not cause a problem after replaying the log, because
when replaying the file extent item for offset 256K, we copy all the
checksums for the extent
13893632 from the log tree to the fs/subvolume
tree, since searching for an checksum item for bytenr
13893632 leaves us
at the first checksum item, which covers the whole range of the extent.
However if we write 64Kb to file offset 256Kb for example, we will
not be able to find and copy the checksums for the last 128Kb of the
extent at bytenr
13893632, referenced by the file range 384Kb to 512Kb.
After writing 64Kb into file offset 256Kb we get the following extent
layout for our file:
[ bytenr
13893632, offset 64K, len 64Kb ]
0 64Kb
[ bytenr
13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr
14155776, offset 0, len 64Kb ]
256Kb 320Kb
[ bytenr
13893632, offset 64Kb, len 192Kb ]
320Kb 512Kb
After fsync'ing the file, if we have a power failure and then mount
the filesystem to replay the log, the following happens:
1) When replaying the file extent item for file offset 320Kb, we
lookup for the checksums for the extent range from
13959168
(
13893632 + 64Kb) to
14155776 (
13893632 + 256Kb), through a call
to btrfs_lookup_csums_range();
2) btrfs_lookup_csums_range() finds the checksum item that starts
precisely at offset
13959168 (item 7 in the log tree, shown before);
3) However that checksum item only covers 64Kb of data, and not 192Kb
of data;
4) As a result only the checksums for the first 64Kb of data referenced
by the file extent item are found and copied to the fs/subvolume tree.
The remaining 128Kb of data, file range 384Kb to 512Kb, doesn't get
the corresponding data checksums found and copied to the fs/subvolume
tree.
5) After replaying the log userspace will not be able to read the file
range from 384Kb to 512Kb, because the checksums are missing and
resulting in an -EIO error.
The following steps reproduce this scenario:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xa3 0 256K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xc7 256K 256K" /mnt/sdc/foobar
$ xfs_io -c "reflink /mnt/sdc/foobar 320K 0 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xe5 256K 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
<power failure>
$ mount /dev/sdc /mnt/sdc
$ md5sum /mnt/sdc/foobar
md5sum: /mnt/sdc/foobar: Input/output error
$ dmesg | tail
[165305.003464] BTRFS info (device sdc): no csum found for inode 257 start 401408
[165305.004014] BTRFS info (device sdc): no csum found for inode 257 start 405504
[165305.004559] BTRFS info (device sdc): no csum found for inode 257 start 409600
[165305.005101] BTRFS info (device sdc): no csum found for inode 257 start 413696
[165305.005627] BTRFS info (device sdc): no csum found for inode 257 start 417792
[165305.006134] BTRFS info (device sdc): no csum found for inode 257 start 421888
[165305.006625] BTRFS info (device sdc): no csum found for inode 257 start 425984
[165305.007278] BTRFS info (device sdc): no csum found for inode 257 start 430080
[165305.008248] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
[165305.009550] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
Fix this simply by deleting first any checksums, from the log tree, for the
range of the extent we are logging at copy_items(). This ensures we do not
get checksum items in the log tree that have overlapping ranges.
This is a long time issue that has been present since we have the clone
(and deduplication) ioctl, and can happen both when an extent is shared
between different files and within the same file.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 3 Dec 2019 11:24:58 +0000 (14:24 +0300)]
btrfs: return error pointer from alloc_test_extent_buffer
commit
b6293c821ea8fa2a631a2112cd86cd435effeb8b upstream.
Callers of alloc_test_extent_buffer have not correctly interpreted the
return value as error pointer, as alloc_test_extent_buffer should behave
as alloc_extent_buffer. The self-tests were unaffected but
btrfs_find_create_tree_block could call both functions and that would
cause problems up in the call chain.
Fixes:
faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 2 Dec 2019 11:01:03 +0000 (11:01 +0000)]
Btrfs: make tree checker detect checksum items with overlapping ranges
commit
ad1d8c439978ede77cbf73cbdd11bafe810421a5 upstream.
Having checksum items, either on the checksums tree or in a log tree, that
represent ranges that overlap each other is a sign of a corruption. Such
case confuses the checksum lookup code and can result in not being able to
find checksums or find stale checksums.
So add a check for such case.
This is motivated by a recent fix for a case where a log tree had checksum
items covering ranges that overlap each other due to extent cloning, and
resulted in missing checksums after replaying the log tree. It also helps
detect past issues such as stale and outdated checksums due to overlapping,
commit
27b9a8122ff71a ("Btrfs: fix csum tree corruption, duplicate and
outdated checksums").
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Tue, 19 Nov 2019 18:59:35 +0000 (13:59 -0500)]
btrfs: do not call synchronize_srcu() in inode_tree_del
commit
f72ff01df9cf5db25c76674cac16605992d15467 upstream.
Testing with the new fsstress uncovered a pretty nasty deadlock with
lookup and snapshot deletion.
Process A
unlink
-> final iput
-> inode_tree_del
-> synchronize_srcu(subvol_srcu)
Process B
btrfs_lookup <- srcu_read_lock() acquired here
-> btrfs_iget
-> find inode that has I_FREEING set
-> __wait_on_freeing_inode()
We're holding the srcu_read_lock() while doing the iget in order to make
sure our fs root doesn't go away, and then we are waiting for the inode
to finish freeing. However because the free'ing process is doing a
synchronize_srcu() we deadlock.
Fix this by dropping the synchronize_srcu() in inode_tree_del(). We
don't need people to stop accessing the fs root at this point, we're
only adding our empty root to the dead roots list.
A larger much more invasive fix is forthcoming to address how we deal
with fs roots, but this fixes the immediate problem.
Fixes:
76dda93c6ae2 ("Btrfs: add snapshot/subvolume destroy ioctl")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Tue, 19 Nov 2019 18:59:20 +0000 (13:59 -0500)]
btrfs: don't double lock the subvol_sem for rename exchange
commit
943eb3bf25f4a7b745dd799e031be276aa104d82 upstream.
If we're rename exchanging two subvols we'll try to lock this lock
twice, which is bad. Just lock once if either of the ino's are subvols.
Fixes:
cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephan Gerhold [Mon, 9 Dec 2019 18:53:43 +0000 (19:53 +0100)]
NFC: nxp-nci: Fix probing without ACPI
[ Upstream commit
868afbaca1e2a7923e48b5e8c07be34660525db5 ]
devm_acpi_dev_add_driver_gpios() returns -ENXIO if CONFIG_ACPI
is disabled (e.g. on device tree platforms).
In this case, nxp-nci will silently fail to probe.
The other NFC drivers only log a debug message if
devm_acpi_dev_add_driver_gpios() fails.
Do the same in nxp-nci to fix this problem.
Fixes:
ad0acfd69add ("NFC: nxp-nci: Get rid of code duplication in ->probe()")
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Fri, 13 Dec 2019 20:00:27 +0000 (12:00 -0800)]
net: dsa: b53: Fix egress flooding settings
[ Upstream commit
63cc54a6f0736a432b04308a74677ab0ba8a58ee ]
There were several issues with
53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback") that resulted in breaking connectivity for standalone ports:
- both user and CPU ports must allow unicast and multicast forwarding by
default otherwise this just flat out breaks connectivity for
standalone DSA ports
- IP multicast is treated similarly as multicast, but has separate
control registers
- the UC, MC and IPMC lookup failure register offsets were wrong, and
instead used bit values that are meaningful for the
B53_IP_MULTICAST_CTRL register
Fixes:
53568438e381 ("net: dsa: b53: Add support for port_egress_floods callback")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Padmanabhan Rajanbabu [Thu, 19 Dec 2019 10:17:01 +0000 (15:47 +0530)]
net: stmmac: platform: Fix MDIO init for platforms without PHY
[ Upstream commit
d3e014ec7d5ebe9644b5486bc530b91e62bbf624 ]
The current implementation of "stmmac_dt_phy" function initializes
the MDIO platform bus data, even in the absence of PHY. This fix
will skip MDIO initialization if there is no PHY present.
Fixes: 7437127 ("net: stmmac: Convert to phylink and remove phylib logic")
Acked-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Sriram Dash <sriram.dash@samsung.com>
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grygorii Strashko [Mon, 9 Dec 2019 11:19:24 +0000 (13:19 +0200)]
net: ethernet: ti: davinci_cpdma: fix warning "device driver frees DMA memory with different size"
[ Upstream commit
8a2b22203f8596729c54eba221b4044351bfe167 ]
The TI CPSW(s) driver produces warning with DMA API debug options enabled:
WARNING: CPU: 0 PID: 1033 at kernel/dma/debug.c:1025 check_unmap+0x4a8/0x968
DMA-API: cpsw
48484000.ethernet: device driver frees DMA memory with different size
[device address=0x00000000abc6aa02] [map size=64 bytes] [unmap size=42 bytes]
CPU: 0 PID: 1033 Comm: ping Not tainted 5.3.0-dirty #41
Hardware name: Generic DRA72X (Flattened Device Tree)
[<
c0112c60>] (unwind_backtrace) from [<
c010d270>] (show_stack+0x10/0x14)
[<
c010d270>] (show_stack) from [<
c09bc564>] (dump_stack+0xd8/0x110)
[<
c09bc564>] (dump_stack) from [<
c013b93c>] (__warn+0xe0/0x10c)
[<
c013b93c>] (__warn) from [<
c013b9ac>] (warn_slowpath_fmt+0x44/0x6c)
[<
c013b9ac>] (warn_slowpath_fmt) from [<
c01e0368>] (check_unmap+0x4a8/0x968)
[<
c01e0368>] (check_unmap) from [<
c01e08a8>] (debug_dma_unmap_page+0x80/0x90)
[<
c01e08a8>] (debug_dma_unmap_page) from [<
c0752414>] (__cpdma_chan_free+0x114/0x16c)
[<
c0752414>] (__cpdma_chan_free) from [<
c07525c4>] (__cpdma_chan_process+0x158/0x17c)
[<
c07525c4>] (__cpdma_chan_process) from [<
c0753690>] (cpdma_chan_process+0x3c/0x5c)
[<
c0753690>] (cpdma_chan_process) from [<
c0758660>] (cpsw_tx_mq_poll+0x48/0x94)
[<
c0758660>] (cpsw_tx_mq_poll) from [<
c0803018>] (net_rx_action+0x108/0x4e4)
[<
c0803018>] (net_rx_action) from [<
c010230c>] (__do_softirq+0xec/0x598)
[<
c010230c>] (__do_softirq) from [<
c0143914>] (do_softirq.part.4+0x68/0x74)
[<
c0143914>] (do_softirq.part.4) from [<
c0143a44>] (__local_bh_enable_ip+0x124/0x17c)
[<
c0143a44>] (__local_bh_enable_ip) from [<
c0871590>] (ip_finish_output2+0x294/0xb7c)
[<
c0871590>] (ip_finish_output2) from [<
c0875440>] (ip_output+0x210/0x364)
[<
c0875440>] (ip_output) from [<
c0875e2c>] (ip_send_skb+0x1c/0xf8)
[<
c0875e2c>] (ip_send_skb) from [<
c08a7fd4>] (raw_sendmsg+0x9a8/0xc74)
[<
c08a7fd4>] (raw_sendmsg) from [<
c07d6b90>] (sock_sendmsg+0x14/0x24)
[<
c07d6b90>] (sock_sendmsg) from [<
c07d8260>] (__sys_sendto+0xbc/0x100)
[<
c07d8260>] (__sys_sendto) from [<
c01011ac>] (__sys_trace_return+0x0/0x14)
Exception stack(0xea9a7fa8 to 0xea9a7ff0)
...
The reason is that cpdma_chan_submit_si() now stores original buffer length
(sw_len) in CPDMA descriptor instead of adjusted buffer length (hw_len)
used to map the buffer.
Hence, fix an issue by passing correct buffer length in CPDMA descriptor.
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Fixes:
6670acacd59e ("net: ethernet: ti: davinci_cpdma: add dma mapped submit")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ido Schimmel [Mon, 9 Dec 2019 06:55:20 +0000 (08:55 +0200)]
mlxsw: spectrum_router: Remove unlikely user-triggerable warning
[ Upstream commit
62201c00c4679ad8f0730d6d925a5d23651dfad2 ]
In case the driver vetoes the addition of an IPv6 multipath route, the
IPv6 stack will emit delete notifications for the sibling routes that
were already added to the FIB trie. Since these siblings are not present
in hardware, a warning will be generated.
Have the driver ignore notifications for routes it does not have.
Fixes:
ebee3cad835f ("ipv6: Add IPv6 multipath notifications for add / replace")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioana Ciornei [Mon, 16 Dec 2019 15:32:30 +0000 (17:32 +0200)]
dpaa2-ptp: fix double free of the ptp_qoriq IRQ
[ Upstream commit
daa6eb5a149519583c8a8cb31945f06417d21902 ]
Upon reusing the ptp_qoriq driver, the ptp_qoriq_free() function was
used on the remove path to free any allocated resources.
The ptp_qoriq IRQ is among these resources that are freed in
ptp_qoriq_free() even though it is also a managed one (allocated using
devm_request_threaded_irq).
Drop the resource managed version of requesting the IRQ in order to not
trigger a double free of the interrupt as below:
[ 226.731005] Trying to free already-free IRQ 126
[ 226.735533] WARNING: CPU: 6 PID: 749 at kernel/irq/manage.c:1707
__free_irq+0x9c/0x2b8
[ 226.743435] Modules linked in:
[ 226.746480] CPU: 6 PID: 749 Comm: bash Tainted: G W
5.4.0-03629-gfd7102c32b2c-dirty #912
[ 226.755857] Hardware name: NXP Layerscape LX2160ARDB (DT)
[ 226.761244] pstate:
40000085 (nZcv daIf -PAN -UAO)
[ 226.766022] pc : __free_irq+0x9c/0x2b8
[ 226.769758] lr : __free_irq+0x9c/0x2b8
[ 226.773493] sp :
ffff8000125039f0
(...)
[ 226.856275] Call trace:
[ 226.858710] __free_irq+0x9c/0x2b8
[ 226.862098] free_irq+0x30/0x70
[ 226.865229] devm_irq_release+0x14/0x20
[ 226.869054] release_nodes+0x1b0/0x220
[ 226.872790] devres_release_all+0x34/0x50
[ 226.876790] device_release_driver_internal+0x100/0x1c0
Fixes:
d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver")
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arthur Kiyanovski [Thu, 19 Dec 2019 15:40:56 +0000 (17:40 +0200)]
net: ena: fix issues in setting interrupt moderation params in ethtool
[ Upstream commit
41c53caa5a61ebc9221b71cc37f4a90549f1121d ]
Issue 1:
--------
Reproduction steps:
1. sudo ethtool -C eth0 rx-usecs 128
2. sudo ethtool -C eth0 adaptive-rx on
3. sudo ethtool -C eth0 adaptive-rx off
4. ethtool -c eth0
expected output: rx-usecs 128
actual output: rx-usecs 0
Reason for issue:
In stage 3, ethtool userspace calls first the ena_get_coalesce() handler
to get the current value of all properties, and then the ena_set_coalesce()
handler. When ena_get_coalesce() is called the adaptive interrupt
moderation is still on. There is an if in the code that returns the
rx_coalesce_usecs only if the adaptive interrupt moderation is off.
And since it is still on, rx_coalesce_usecs is not set, meaning it
stays 0.
Solution to issue:
Remove this if static interrupt moderation intervals have nothing to do
with dynamic ones.
Issue 2:
--------
Reproduction steps:
1. sudo ethtool -C eth0 adaptive-rx on
2. sudo ethtool -C eth0 rx-usecs 128
3. ethtool -c eth0
expected output: rx-usecs 128
actual output: rx-usecs 0
Reason for issue:
In stage 2, when ena_set_coalesce() is called, the handler tests if
rx adaptive interrupt moderation is on, and if it is, it returns before
getting to the part in the function that sets the rx non-adaptive
interrupt moderation interval.
Solution to issue:
Remove the return from the function when rx adaptive interrupt moderation
is on.
Also cleaned up the fixed code in ena_set_coalesce by grouping together
adaptive interrupt moderation toggling, and using && instead of nested
ifs.
Fixes:
b3db86dc4b82 ("net: ena: reimplement set/get_coalesce()")
Fixes:
0eda847953d8 ("net: ena: fix retrieval of nonadaptive interrupt moderation intervals")
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arthur Kiyanovski [Thu, 19 Dec 2019 15:40:55 +0000 (17:40 +0200)]
net: ena: fix default tx interrupt moderation interval
[ Upstream commit
05785adf6e570a068adf0502b61fe2b521d7f0ca ]
Current default non-adaptive tx interrupt moderation interval is 196 us.
This value is too high and might cause the tx queue to fill up.
In this commit we set the default non-adaptive tx interrupt moderation
interval to 64 us in order to:
1. Reduce the probability of the queue filling-up (when compared to the
current default value of 196 us).
2. Reduce unnecessary tx interrupt overhead (which happens if we set the
default tx interval to 0).
We determined experimentally that 64 us is an optimal value that
reduces interrupt rate by more than 20% without affecting performance.
Fixes:
1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 7 Dec 2019 22:10:34 +0000 (14:10 -0800)]
bonding: fix bond_neigh_init()
[ Upstream commit
9e99bfefdbce2e23ef37487a3bcb4adf90a791d1 ]
1) syzbot reported an uninit-value in bond_neigh_setup() [1]
bond_neigh_setup() uses a temporary on-stack 'struct neigh_parms parms',
but only clears parms.neigh_setup field.
A stacked bonding device would then enter bond_neigh_setup()
and read garbage from parms->dev.
If we get really unlucky and garbage is matching @dev, then we
could recurse and eventually crash.
Let's make sure the whole structure is cleared to avoid surprises.
2) bond_neigh_setup() can be called while another cpu manipulates
the master device, removing or adding a slave.
We need at least rcu protection to prevent use-after-free.
Note: Prior code does not support a stack of bonding devices,
this patch does not attempt to fix this, and leave a comment instead.
[1]
BUG: KMSAN: uninit-value in bond_neigh_setup+0xa4/0x110 drivers/net/bonding/bond_main.c:3655
CPU: 0 PID: 11256 Comm: syz-executor.0 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
__msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245
bond_neigh_setup+0xa4/0x110 drivers/net/bonding/bond_main.c:3655
bond_neigh_init+0x216/0x4b0 drivers/net/bonding/bond_main.c:3626
___neigh_create+0x169e/0x2c40 net/core/neighbour.c:613
__neigh_create+0xbd/0xd0 net/core/neighbour.c:674
ip6_finish_output2+0x149a/0x2670 net/ipv6/ip6_output.c:113
__ip6_finish_output+0x83d/0x8f0 net/ipv6/ip6_output.c:142
ip6_finish_output+0x2db/0x420 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:175
dst_output include/net/dst.h:436 [inline]
NF_HOOK include/linux/netfilter.h:305 [inline]
mld_sendpack+0xebd/0x13d0 net/ipv6/mcast.c:1682
mld_send_cr net/ipv6/mcast.c:1978 [inline]
mld_ifc_timer_expire+0x116b/0x1680 net/ipv6/mcast.c:2477
call_timer_fn+0x232/0x530 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers+0xd60/0x1270 kernel/time/timer.c:1773
run_timer_softirq+0x2d/0x50 kernel/time/timer.c:1786
__do_softirq+0x4a1/0x83a kernel/softirq.c:293
invoke_softirq kernel/softirq.c:375 [inline]
irq_exit+0x230/0x280 kernel/softirq.c:416
exiting_irq+0xe/0x10 arch/x86/include/asm/apic.h:536
smp_apic_timer_interrupt+0x48/0x70 arch/x86/kernel/apic/apic.c:1138
apic_timer_interrupt+0x2e/0x40 arch/x86/entry/entry_64.S:835
</IRQ>
RIP: 0010:kmsan_free_page+0x18d/0x1c0 mm/kmsan/kmsan_shadow.c:439
Code: 4c 89 ff 44 89 f6 e8 82 0d ee ff 65 ff 0d 9f 26 3b 60 65 8b 05 98 26 3b 60 85 c0 75 24 e8 5b f6 35 ff 4c 89 6d d0 ff 75 d0 9d <48> 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 0f 0b 0f 0b 0f
RSP: 0018:
ffffb328034af818 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffff13
RAX:
0000000000000000 RBX:
ffffe2d7471f8360 RCX:
0000000000000000
RDX:
ffffffffadea7000 RSI:
0000000000000004 RDI:
ffff93496fcda104
RBP:
ffffb328034af850 R08:
ffff934a47e86d00 R09:
ffff93496fc41900
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000001
R13:
0000000000000246 R14:
0000000000000000 R15:
ffffe2d7472225c0
free_pages_prepare mm/page_alloc.c:1138 [inline]
free_pcp_prepare mm/page_alloc.c:1230 [inline]
free_unref_page_prepare+0x1d9/0x770 mm/page_alloc.c:3025
free_unref_page mm/page_alloc.c:3074 [inline]
free_the_page mm/page_alloc.c:4832 [inline]
__free_pages+0x154/0x230 mm/page_alloc.c:4840
__vunmap+0xdac/0xf20 mm/vmalloc.c:2277
__vfree mm/vmalloc.c:2325 [inline]
vfree+0x7c/0x170 mm/vmalloc.c:2355
copy_entries_to_user net/ipv6/netfilter/ip6_tables.c:883 [inline]
get_entries net/ipv6/netfilter/ip6_tables.c:1041 [inline]
do_ip6t_get_ctl+0xfa4/0x1030 net/ipv6/netfilter/ip6_tables.c:1709
nf_sockopt net/netfilter/nf_sockopt.c:104 [inline]
nf_getsockopt+0x481/0x4e0 net/netfilter/nf_sockopt.c:122
ipv6_getsockopt+0x264/0x510 net/ipv6/ipv6_sockglue.c:1400
tcp_getsockopt+0x1c6/0x1f0 net/ipv4/tcp.c:3688
sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3110
__sys_getsockopt+0x533/0x7b0 net/socket.c:2129
__do_sys_getsockopt net/socket.c:2144 [inline]
__se_sys_getsockopt+0xe1/0x100 net/socket.c:2141
__x64_sys_getsockopt+0x62/0x80 net/socket.c:2141
do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45d20a
Code: b8 34 01 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 8d 8b fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 6a 8b fb ff c3 66 0f 1f 84 00 00 00 00 00
RSP: 002b:
0000000000a6f618 EFLAGS:
00000212 ORIG_RAX:
0000000000000037
RAX:
ffffffffffffffda RBX:
0000000000a6f640 RCX:
000000000045d20a
RDX:
0000000000000041 RSI:
0000000000000029 RDI:
0000000000000003
RBP:
0000000000717cc0 R08:
0000000000a6f63c R09:
0000000000004000
R10:
0000000000a6f740 R11:
0000000000000212 R12:
0000000000000003
R13:
0000000000000000 R14:
0000000000000029 R15:
0000000000715b00
Local variable description: ----parms@bond_neigh_init
Variable was created at:
bond_neigh_init+0x8c/0x4b0 drivers/net/bonding/bond_main.c:3617
bond_neigh_init+0x8c/0x4b0 drivers/net/bonding/bond_main.c:3617
Fixes:
9918d5bf329d ("bonding: modify only neigh_parms owned by us")
Fixes:
234bcf8a499e ("net/bonding: correctly proxy slave neigh param setup ndo function")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Sat, 7 Dec 2019 20:23:21 +0000 (12:23 -0800)]
neighbour: remove neigh_cleanup() method
[ Upstream commit
f394722fb0d0f701119368959d7cd0ecbc46363a ]
neigh_cleanup() has not been used for seven years, and was a wrong design.
Messing with shared pointer in bond_neigh_init() without proper
memory barriers would at least trigger syzbot complains eventually.
It is time to remove this stuff.
Fixes:
b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ido Schimmel [Mon, 9 Dec 2019 06:56:34 +0000 (08:56 +0200)]
selftests: forwarding: Delete IPv6 address at the end
[ Upstream commit
65cb13986229cec02635a1ecbcd1e2dd18353201 ]
When creating the second host in h2_create(), two addresses are assigned
to the interface, but only one is deleted. When running the test twice
in a row the following error is observed:
$ ./router_bridge_vlan.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: vlan [ OK ]
$ ./router_bridge_vlan.sh
RTNETLINK answers: File exists
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: vlan [ OK ]
Fix this by deleting the address during cleanup.
Fixes:
5b1e7f9ebd56 ("selftests: forwarding: Test routed bridge interface")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Mon, 9 Dec 2019 05:45:54 +0000 (13:45 +0800)]
sctp: fully initialize v4 addr in some functions
[ Upstream commit
b6f3320b1d5267e7b583a6d0c88dda518101740c ]
Syzbot found a crash:
BUG: KMSAN: uninit-value in crc32_body lib/crc32.c:112 [inline]
BUG: KMSAN: uninit-value in crc32_le_generic lib/crc32.c:179 [inline]
BUG: KMSAN: uninit-value in __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202
Call Trace:
crc32_body lib/crc32.c:112 [inline]
crc32_le_generic lib/crc32.c:179 [inline]
__crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202
chksum_update+0xb2/0x110 crypto/crc32c_generic.c:90
crypto_shash_update+0x4c5/0x530 crypto/shash.c:107
crc32c+0x150/0x220 lib/libcrc32c.c:47
sctp_csum_update+0x89/0xa0 include/net/sctp/checksum.h:36
__skb_checksum+0x1297/0x12a0 net/core/skbuff.c:2640
sctp_compute_cksum include/net/sctp/checksum.h:59 [inline]
sctp_packet_pack net/sctp/output.c:528 [inline]
sctp_packet_transmit+0x40fb/0x4250 net/sctp/output.c:597
sctp_outq_flush_transports net/sctp/outqueue.c:1146 [inline]
sctp_outq_flush+0x1823/0x5d80 net/sctp/outqueue.c:1194
sctp_outq_uncork+0xd0/0xf0 net/sctp/outqueue.c:757
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1781 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1184 [inline]
sctp_do_sm+0x8fe1/0x9720 net/sctp/sm_sideeffect.c:1155
sctp_primitive_REQUESTHEARTBEAT+0x175/0x1a0 net/sctp/primitive.c:185
sctp_apply_peer_addr_params+0x212/0x1d40 net/sctp/socket.c:2433
sctp_setsockopt_peer_addr_params net/sctp/socket.c:2686 [inline]
sctp_setsockopt+0x189bb/0x19090 net/sctp/socket.c:4672
The issue was caused by transport->ipaddr set with uninit addr param, which
was passed by:
sctp_transport_init net/sctp/transport.c:47 [inline]
sctp_transport_new+0x248/0xa00 net/sctp/transport.c:100
sctp_assoc_add_peer+0x5ba/0x2030 net/sctp/associola.c:611
sctp_process_param net/sctp/sm_make_chunk.c:2524 [inline]
where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize
the padding of addr->v4.
Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr)
will become the part of skb, and the issue occurs.
This patch is to fix it by initializing the padding of addr->v4 in
sctp_v4_from_addr_param(), as well as other functions that do the similar
thing, and these functions shouldn't trust that the caller initializes the
memory, as Marcelo suggested.
Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcelo Ricardo Leitner [Tue, 17 Dec 2019 01:01:16 +0000 (22:01 -0300)]
sctp: fix memleak on err handling of stream initialization
[ Upstream commit
951c6db954a1adefab492f6da805decacabbd1a7 ]
syzbot reported a memory leak when an allocation fails within
genradix_prealloc() for output streams. That's because
genradix_prealloc() leaves initialized members initialized when the
issue happens and SCTP stack will abort the current initialization but
without cleaning up such members.
The fix here is to always call genradix_free() when genradix_prealloc()
fails, for output and also input streams, as it suffers from the same
issue.
Reported-by: syzbot+772d9e36c490b18d51d1@syzkaller.appspotmail.com
Fixes:
2075e50caf5e ("sctp: convert to genradix")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manish Chopra [Thu, 12 Dec 2019 14:49:28 +0000 (06:49 -0800)]
qede: Fix multicast mac configuration
[ Upstream commit
0af67e49b018e7280a4227bfe7b6005bc9d3e442 ]
Driver doesn't accommodate the configuration for max number
of multicast mac addresses, in such particular case it leaves
the device with improper/invalid multicast configuration state,
causing connectivity issues (in lacp bonding like scenarios).
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manish Chopra [Thu, 19 Dec 2019 18:35:16 +0000 (10:35 -0800)]
qede: Disable hardware gro when xdp prog is installed
[ Upstream commit
4c8dc00503db24deaf0b89dddfa84b7cba7cd4ce ]
commit
18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced
a regression in driver that when xdp program is installed on
qede device, device's aggregation feature (hardware GRO) is not
getting disabled, which is unexpected with xdp.
Fixes:
18c602dee472 ("qede: Use NETIF_F_GRO_HW.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Hurley [Tue, 17 Dec 2019 11:28:56 +0000 (11:28 +0000)]
nfp: flower: fix stats id allocation
[ Upstream commit
39f14c00b13c47186739a4cbc7a16e04d7fdbb60 ]
As flower rules are added, they are given a stats ID based on the number
of rules that can be supported in firmware. Only after the initial
allocation of all available IDs does the driver begin to reuse those that
have been released.
The initial allocation of IDs was modified to account for multiple memory
units on the offloaded device. However, this introduced a bug whereby the
counter that controls the IDs could be decremented before the ID was
assigned (where it is further decremented). This means that the stats ID
could be assigned as -1/0xfffffff which is out of range.
Fix this by only decrementing the main counter after the current ID has
been assigned.
Fixes:
467322e2627f ("nfp: flower: support multiple memory units for filter offloads")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cristian Birsan [Thu, 12 Dec 2019 11:52:47 +0000 (13:52 +0200)]
net: usb: lan78xx: Fix suspend/resume PHY register access error
[ Upstream commit
20032b63586ac6c28c936dff696981159913a13f ]
Lan78xx driver accesses the PHY registers through MDIO bus over USB
connection. When performing a suspend/resume, the PHY registers can be
accessed before the USB connection is resumed. This will generate an
error and will prevent the device to resume correctly.
This patch adds the dependency between the MDIO bus and USB device to
allow correct handling of suspend/resume.
Fixes:
ce85e13ad6ef ("lan78xx: Update to use phylib instead of mii_if_info.")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jouni Hogander [Tue, 17 Dec 2019 11:46:34 +0000 (13:46 +0200)]
net-sysfs: Call dev_hold always in rx_queue_add_kobject
[ Upstream commit
ddd9b5e3e765d8ed5a35786a6cb00111713fe161 ]
Dev_hold has to be called always in rx_queue_add_kobject.
Otherwise usage count drops below 0 in case of failure in
kobject_init_and_add.
Fixes:
b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Reported-by: syzbot <syzbot+30209ea299c09d8785c9@syzkaller.appspotmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Tue, 17 Dec 2019 01:57:40 +0000 (01:57 +0000)]
net: qlogic: Fix error paths in ql_alloc_large_buffers()
[ Upstream commit
cad46039e4c99812db067c8ac22a864960e7acc4 ]
ql_alloc_large_buffers() has the usual RX buffer allocation
loop where it allocates skbs and maps them for DMA. It also
treats failure as a fatal error.
There are (at least) three bugs in the error paths:
1. ql_free_large_buffers() assumes that the lrg_buf[] entry for the
first buffer that couldn't be allocated will have .skb == NULL.
But the qla_buf[] array is not zero-initialised.
2. ql_free_large_buffers() DMA-unmaps all skbs in lrg_buf[]. This is
incorrect for the last allocated skb, if DMA mapping failed.
3. Commit
1acb8f2a7a9f ("net: qlogic: Fix memory leak in
ql_alloc_large_buffers") added a direct call to dev_kfree_skb_any()
after the skb is recorded in lrg_buf[], so ql_free_large_buffers()
will double-free it.
The bugs are somewhat inter-twined, so fix them all at once:
* Clear each entry in qla_buf[] before attempting to allocate
an skb for it. This goes half-way to fixing bug 1.
* Set the .skb field only after the skb is DMA-mapped. This
fixes the rest.
Fixes:
1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue ...")
Fixes:
0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() ...")
Fixes:
1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Thu, 19 Dec 2019 23:24:52 +0000 (23:24 +0000)]
net: phy: ensure that phy IDs are correctly typed
[ Upstream commit
7d49a32a66d2215c5b3bf9bc67c9036ea9904111 ]
PHY IDs are 32-bit unsigned quantities. Ensure that they are always
treated as such, and not passed around as "int"s.
Fixes:
13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jia-Ju Bai [Wed, 18 Dec 2019 09:21:55 +0000 (17:21 +0800)]
net: nfc: nci: fix a possible sleep-in-atomic-context bug in nci_uart_tty_receive()
[ Upstream commit
b7ac893652cafadcf669f78452329727e4e255cc ]
The kernel may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:
net/nfc/nci/uart.c, 349:
nci_skb_alloc in nci_uart_default_recv_buf
net/nfc/nci/uart.c, 255:
(FUNC_PTR)nci_uart_default_recv_buf in nci_uart_tty_receive
net/nfc/nci/uart.c, 254:
spin_lock in nci_uart_tty_receive
nci_skb_alloc(GFP_KERNEL) can sleep at runtime.
(FUNC_PTR) means a function pointer is called.
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC for
nci_skb_alloc().
This bug is found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiangfeng Xiao [Thu, 19 Dec 2019 02:08:07 +0000 (10:08 +0800)]
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
[ Upstream commit
90b3b339364c76baa2436445401ea9ade040c216 ]
When doing stress test, we get the following trace:
kernel BUG at lib/dynamic_queue_limits.c:26!
Internal error: Oops - BUG: 0 [#1] SMP ARM
Modules linked in: hip04_eth
CPU: 0 PID: 2003 Comm: tDblStackPcap0 Tainted: G O L 4.4.197 #1
Hardware name: Hisilicon A15
task:
c3637668 task.stack:
de3bc000
PC is at dql_completed+0x18/0x154
LR is at hip04_tx_reclaim+0x110/0x174 [hip04_eth]
pc : [<
c041abfc>] lr : [<
bf0003a8>] psr:
800f0313
sp :
de3bdc2c ip :
00000000 fp :
c020fb10
r10:
00000000 r9 :
c39b4224 r8 :
00000001
r7 :
00000046 r6 :
c39b4000 r5 :
0078f392 r4 :
0078f392
r3 :
00000047 r2 :
00000000 r1 :
00000046 r0 :
df5d5c80
Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control:
32c5387d Table:
1e189b80 DAC:
55555555
Process tDblStackPcap0 (pid: 2003, stack limit = 0xde3bc190)
Stack: (0xde3bdc2c to 0xde3be000)
[<
c041abfc>] (dql_completed) from [<
bf0003a8>] (hip04_tx_reclaim+0x110/0x174 [hip04_eth])
[<
bf0003a8>] (hip04_tx_reclaim [hip04_eth]) from [<
bf0012c0>] (hip04_rx_poll+0x20/0x388 [hip04_eth])
[<
bf0012c0>] (hip04_rx_poll [hip04_eth]) from [<
c04c8d9c>] (net_rx_action+0x120/0x374)
[<
c04c8d9c>] (net_rx_action) from [<
c021eaf4>] (__do_softirq+0x218/0x318)
[<
c021eaf4>] (__do_softirq) from [<
c021eea0>] (irq_exit+0x88/0xac)
[<
c021eea0>] (irq_exit) from [<
c0240130>] (msa_irq_exit+0x11c/0x1d4)
[<
c0240130>] (msa_irq_exit) from [<
c0267ba8>] (__handle_domain_irq+0x110/0x148)
[<
c0267ba8>] (__handle_domain_irq) from [<
c0201588>] (gic_handle_irq+0xd4/0x118)
[<
c0201588>] (gic_handle_irq) from [<
c0558360>] (__irq_svc+0x40/0x58)
Exception stack(0xde3bdde0 to 0xde3bde28)
dde0:
00000000 00008001 c3637668 00000000 00000000 a00f0213 dd3627a0 c0af6380
de00:
c086d380 a00f0213 c0a22a50 de3bde6c 00000002 de3bde30 c0558138 c055813c
de20:
600f0213 ffffffff
[<
c0558360>] (__irq_svc) from [<
c055813c>] (_raw_spin_unlock_irqrestore+0x44/0x54)
Kernel panic - not syncing: Fatal exception in interrupt
Pre-modification code:
int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
[...]
[1] priv->tx_head = TX_NEXT(tx_head);
[2] count++;
[3] netdev_sent_queue(ndev, skb->len);
[...]
}
An rx interrupt occurs if hip04_mac_start_xmit just executes to the line 2,
tx_head has been updated, but corresponding 'skb->len' has not been
added to dql_queue.
And then
hip04_mac_interrupt->__napi_schedule->hip04_rx_poll->hip04_tx_reclaim
In hip04_tx_reclaim, because tx_head has been updated,
bytes_compl will plus an additional "skb-> len"
which has not been added to dql_queue. And then
trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed).
To solve the problem described above, we put
"netdev_sent_queue(ndev, skb->len);"
before
"priv->tx_head = TX_NEXT(tx_head);"
Fixes:
a41ea46a9a12 ("net: hisilicon: new hip04 ethernet driver")
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Navid Emamdoost [Sun, 15 Dec 2019 01:10:44 +0000 (19:10 -0600)]
net: gemini: Fix memory leak in gmac_setup_txqs
[ Upstream commit
f37f710353677639bc5d37ee785335994adf2529 ]
In the implementation of gmac_setup_txqs() the allocated desc_ring is
leaked if TX queue base is not aligned. Release it via
dma_free_coherent.
Fixes:
4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geert Uytterhoeven [Fri, 20 Dec 2019 13:31:40 +0000 (14:31 +0100)]
net: dst: Force 4-byte alignment of dst_metrics
[ Upstream commit
258a980d1ec23e2c786e9536a7dd260bea74bae6 ]
When storing a pointer to a dst_metrics structure in dst_entry._metrics,
two flags are added in the least significant bits of the pointer value.
Hence this assumes all pointers to dst_metrics structures have at least
4-byte alignment.
However, on m68k, the minimum alignment of 32-bit values is 2 bytes, not
4 bytes. Hence in some kernel builds, dst_default_metrics may be only
2-byte aligned, leading to obscure boot warnings like:
WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x44/0x9a
refcount_t: underflow; use-after-free.
Modules linked in:
CPU: 0 PID: 7 Comm: ksoftirqd/0 Tainted: G W 5.5.0-rc2-atari-01448-g114a1a1038af891d-dirty #261
Stack from
10835e6c:
10835e6c 0038134f 00023fa6 00394b0f 0000001c 00000009 00321560 00023fea
00394b0f 0000001c 001a70f8 00000009 00000000 10835eb4 00000001 00000000
04208040 0000000a 00394b4a 10835ed4 00043aa8 001a70f8 00394b0f 0000001c
00000009 00394b4a 0026aba8 003215a4 00000003 00000000 0026d5a8 00000001
003215a4 003a4361 003238d6 000001f0 00000000 003215a4 10aa3b00 00025e84
003ddb00 10834000 002416a8 10aa3b00 00000000 00000080 000aa038 0004854a
Call Trace: [<
00023fa6>] __warn+0xb2/0xb4
[<
00023fea>] warn_slowpath_fmt+0x42/0x64
[<
001a70f8>] refcount_warn_saturate+0x44/0x9a
[<
00043aa8>] printk+0x0/0x18
[<
001a70f8>] refcount_warn_saturate+0x44/0x9a
[<
0026aba8>] refcount_sub_and_test.constprop.73+0x38/0x3e
[<
0026d5a8>] ipv4_dst_destroy+0x5e/0x7e
[<
00025e84>] __local_bh_enable_ip+0x0/0x8e
[<
002416a8>] dst_destroy+0x40/0xae
Fix this by forcing 4-byte alignment of all dst_metrics structures.
Fixes:
e5fd387ad5b30ca3 ("ipv6: do not overwrite inetpeer metrics prematurely")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Thu, 19 Dec 2019 23:24:47 +0000 (23:24 +0000)]
mod_devicetable: fix PHY module format
[ Upstream commit
d2ed49cf6c13e379c5819aa5ac20e1f9674ebc89 ]
When a PHY is probed, if the top bit is set, we end up requesting a
module with the string "mdio:-
10101110000000100101000101010001" -
the top bit is printed to a signed -1 value. This leads to the module
not being loaded.
Fix the module format string and the macro generating the values for
it to ensure that we only print unsigned types and the top bit is
always 0/1. We correctly end up with
"mdio:
10101110000000100101000101010001".
Fixes:
8626d3b43280 ("phylib: Support phy module autoloading")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuhong Yuan [Mon, 9 Dec 2019 16:22:07 +0000 (00:22 +0800)]
fjes: fix missed check in fjes_acpi_add
[ Upstream commit
a288f105a03a7e0e629a8da2b31f34ebf0343ee2 ]
fjes_acpi_add() misses a check for platform_device_register_simple().
Add a check to fix it.
Fixes:
658d439b2292 ("fjes: Introduce FUJITSU Extended Socket Network Device driver")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mao Wenan [Mon, 9 Dec 2019 13:31:25 +0000 (21:31 +0800)]
af_packet: set defaule value for tmo
[ Upstream commit
b43d1f9f7067c6759b1051e8ecb84e82cef569fe ]
There is softlockup when using TPACKET_V3:
...
NMI watchdog: BUG: soft lockup - CPU#2 stuck for 60010ms!
(__irq_svc) from [<
c0558a0c>] (_raw_spin_unlock_irqrestore+0x44/0x54)
(_raw_spin_unlock_irqrestore) from [<
c027b7e8>] (mod_timer+0x210/0x25c)
(mod_timer) from [<
c0549c30>]
(prb_retire_rx_blk_timer_expired+0x68/0x11c)
(prb_retire_rx_blk_timer_expired) from [<
c027a7ac>]
(call_timer_fn+0x90/0x17c)
(call_timer_fn) from [<
c027ab6c>] (run_timer_softirq+0x2d4/0x2fc)
(run_timer_softirq) from [<
c021eaf4>] (__do_softirq+0x218/0x318)
(__do_softirq) from [<
c021eea0>] (irq_exit+0x88/0xac)
(irq_exit) from [<
c0240130>] (msa_irq_exit+0x11c/0x1d4)
(msa_irq_exit) from [<
c0209cf0>] (handle_IPI+0x650/0x7f4)
(handle_IPI) from [<
c02015bc>] (gic_handle_irq+0x108/0x118)
(gic_handle_irq) from [<
c0558ee4>] (__irq_usr+0x44/0x5c)
...
If __ethtool_get_link_ksettings() is failed in
prb_calc_retire_blk_tmo(), msec and tmo will be zero, so tov_in_jiffies
is zero and the timer expire for retire_blk_timer is turn to
mod_timer(&pkc->retire_blk_timer, jiffies + 0),
which will trigger cpu usage of softirq is 100%.
Fixes:
f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Tested-by: Xiao Jiangfeng <xiaojiangfeng@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 21 Dec 2019 10:05:23 +0000 (11:05 +0100)]
Linux 5.4.6
Takashi Iwai [Sat, 14 Dec 2019 17:52:17 +0000 (18:52 +0100)]
ALSA: hda: Fix regression by strip mask fix
commit
6fd739c04ffd877641b01371f9fde67901e7f9cb upstream.
The commit
e38e486d66e2 ("ALSA: hda: Modify stream stripe mask only
when needed") tried to address the regression by the unconditional
application of the stripe mask, but this caused yet another
regression for the previously working devices. Namely, the patch
clears the azx_dev->stripe flag at snd_hdac_stream_clear(), but this
may be called multiple times before restarting the stream, so this
ended up with clearance of the flag for the whole time.
This patch fixes the regression by moving the azx_dev->stripe flag
clearance at the counter-part, the close callback of HDMI codec
driver instead.
Fixes:
e38e486d66e2 ("ALSA: hda: Modify stream stripe mask only when needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205855
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191214175217.31852-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
changzhu [Tue, 10 Dec 2019 14:00:59 +0000 (22:00 +0800)]
drm/amdgpu: add invalidate semaphore limit for SRIOV and picasso in gmc9
commit
90f6452ca58d436de4f69b423ecd75a109aa9766 upstream.
It may fail to load guest driver in round 2 or cause Xstart problem
when using invalidate semaphore for SRIOV or picasso. So it needs avoid
using invalidate semaphore for SRIOV and picasso.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
changzhu [Tue, 10 Dec 2019 02:23:09 +0000 (10:23 +0800)]
drm/amdgpu: avoid using invalidate semaphore for picasso
commit
413fc385a594ea6eb08843be33939057ddfdae76 upstream.
It may cause timeout waiting for sem acquire in VM flush when using
invalidate semaphore for picasso. So it needs to avoid using invalidate
semaphore for piasso.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenyu Wang [Thu, 21 Nov 2019 05:57:45 +0000 (13:57 +0800)]
drm/i915/gvt: Fix cmd length check for MI_ATOMIC
commit
92b1aa773fadb4e2a90ed5d3beecb422d568ad9a upstream.
Correct valid command length check for MI_ATOMIC, need to check inline
data available field instead of operand data length for whole command.
Fixes:
00a33be40634 ("drm/i915/gvt: Add valid length check for MI variable commands")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Gao Fred <fred.gao@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiaojie Yuan [Wed, 20 Nov 2019 06:02:22 +0000 (14:02 +0800)]
drm/amdgpu/gfx10: re-init clear state buffer after gpu reset
commit
210b3b3c7563df391bd81d49c51af303b928de4a upstream.
This patch fixes 2nd baco reset failure with gfxoff enabled on navi1x.
clear state buffer (resides in vram) is corrupted after 1st baco reset,
upon gfxoff exit, CPF gets garbage header in CSIB and hangs.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiaojie Yuan [Thu, 14 Nov 2019 08:56:08 +0000 (16:56 +0800)]
drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt
commit
1e902a6d32d73e4a6b3bc9d7cd43d4ee2b242dea upstream.
50us is not enough to wait for cp ready after gpu reset on some navi asics.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Suggested-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
changzhu [Tue, 19 Nov 2019 03:13:29 +0000 (11:13 +0800)]
drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10
commit
f920d1bb9c4e77efb08c41d70b6d442f46fd8902 upstream.
It may lose gpuvm invalidate acknowldege state across power-gating off
cycle. To avoid this issue in gmc9/gmc10 invalidation, add semaphore acquire
before invalidation and semaphore release after invalidation.
After adding semaphore acquire before invalidation, the semaphore
register become read-only if another process try to acquire semaphore.
Then it will not be able to release this semaphore. Then it may cause
deadlock problem. If this deadlock problem happens, it needs a semaphore
firmware fix.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
changzhu [Tue, 19 Nov 2019 02:18:39 +0000 (10:18 +0800)]
drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub
commit
6c2c8972374ac5c35078d36d7559f64c368f7b33 upstream.
SW must acquire/release one of the vm_invalidate_eng*_sem around the
invalidation req/ack. Through this way,it can avoid losing invalidate
acknowledge state across power-gating off cycle.
To use vm_invalidate_eng*_sem, it needs to initialize
vm_invalidate_eng*_sem firstly.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 19 Nov 2019 20:54:17 +0000 (15:54 -0500)]
drm/amd/display: add default clocks if not able to fetch them
commit
946621691f9919c263b4679b77f81f06019d3636 upstream.
dm_pp_get_clock_levels_by_type needs to add the default clocks
to the powerplay case as well. This was accidently dropped.
Fixes:
b3ea88fef321de ("drm/amd/powerplay: add get_clock_by_type interface for display")
Bug: https://gitlab.freedesktop.org/drm/amd/issues/906
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Fri, 15 Nov 2019 15:02:44 +0000 (10:02 -0500)]
drm/amd/display: re-enable wait in pipelock, but add timeout
commit
627f75d18910b287472593a4a2c41de9a386f5a2 upstream.
Removing this causes hangs in some games, so re-add it, but add
a timeout so we don't hang while switching flip types.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205169
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=112266
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wayne Lin [Tue, 3 Dec 2019 04:24:23 +0000 (12:24 +0800)]
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
commit
e5a6ca27eb72c67533ddfc11c06df84beaa167fa upstream.
[Why]
If the payload_state is DP_PAYLOAD_DELETE_LOCAL in series, current
code doesn't delete the payload at current index and just move the
index to next one after shuffling payloads.
[How]
Drop the i++ increasing part in for loop head and decide whether
to increase the index or not according to payload_state of current
payload.
Changes since v1:
* Refine the code to have it easy reading
* Amend the commit message to meet the way code is modified now.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes:
706246c761dd ("drm/dp_mst: Refactor drm_dp_update_payload_part1()")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.1+
[Added cc for stable]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203042423.5961-1-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Tue, 26 Nov 2019 14:41:46 +0000 (09:41 -0500)]
drm/radeon: fix r1xx/r2xx register checker for POT textures
commit
008037d4d972c9c47b273e40e52ae34f9d9e33e7 upstream.
Shift and mask were reversed. Noticed by chance.
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Wed, 27 Nov 2019 20:12:09 +0000 (22:12 +0200)]
drm/i915/fbc: Disable fbc by default on all glk+
commit
0eb8e74f7202a4a98bbc0c1adeed3986cf50b66a upstream.
We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.
Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit
cd8c021b36a66833cefe2c90a79a9e312a2a5690)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Fri, 15 Nov 2019 21:07:20 +0000 (16:07 -0500)]
drm/nouveau/kms/nv50-: Limit MST BPC to 8
commit
ae5769d4670982bc483885b120b557a9ffd57527 upstream.
Noticed this while working on some unrelated CRC stuff. Currently,
userspace has very little support for BPCs higher than 8. While this
doesn't matter for most things, on MST topologies we need to be careful
about ensuring that we do our best to make any given display
configuration fit within the bandwidth restraints of the topology, since
otherwise less people's monitor configurations will work.
Allowing for BPC settings higher than 8 dramatically increases the
required bandwidth for displays in most configurations, and consequently
makes it a lot less likely that said display configurations will pass
the atomic check.
In the future we want to fix this correctly by making it so that we
adjust the bpp for each display in a topology to be as high as possible,
while making sure to lower the bpp of each display in the event that we
run out of bandwidth and need to rerun our atomic check. But for now,
follow the behavior that both i915 and amdgpu are sticking to.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Fri, 15 Nov 2019 21:07:19 +0000 (16:07 -0500)]
drm/nouveau/kms/nv50-: Store the bpc we're using in nv50_head_atom
commit
ac2d9275f371346922b31a388bbaa6a54f1154a4 upstream.
In order to be able to use bpc values that are different from what the
connector reports, we want to be able to store the bpc value we decide
on using for an atomic state in nv50_head_atom and refer to that instead
of simply using the value that the connector reports throughout the
whole atomic check phase and commit phase. This will let us (eventually)
implement the max bpc connector property, and will also be needed for
limiting the bpc we use on MST displays to 8 in the next commit.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Fri, 15 Nov 2019 21:07:18 +0000 (16:07 -0500)]
drm/nouveau/kms/nv50-: Call outp_atomic_check_view() before handling PBN
commit
310d35771ee9040f5744109fc277206ad96ba253 upstream.
Since nv50_outp_atomic_check_view() can set crtc_state->mode_changed, we
probably should be calling it before handling any PBN changes. Just a
precaution.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hernandez [Tue, 3 Dec 2019 22:36:57 +0000 (14:36 -0800)]
scsi: qla2xxx: Fix incorrect SFUB length used for Secure Flash Update MB Cmd
commit
c868907e1ac6a08a17f8fa9ce482c0a496896e9e upstream.
SFUB length should be in DWORDs when passed to FW.
Fixes:
3f006ac342c03 ("scsi: qla2xxx: Secure flash update support for ISP28XX")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191203223657.22109-4-hmadhani@marvell.com
Signed-off-by: Michael Hernandez <mhernandez@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Himanshu Madhani [Tue, 3 Dec 2019 22:36:55 +0000 (14:36 -0800)]
scsi: qla2xxx: Correctly retrieve and interpret active flash region
commit
4e71dcae0c4cd1e9d19b8b3d80214a4bcdca5a42 upstream.
ISP27XX/28XX supports multiple flash regions. This patch fixes issue where
active flash region was not interpreted correctly during secure flash
update process.
[mkp: typo]
Fixes:
5fa8774c7f38c ("scsi: qla2xxx: Add 28xx flash primary/secondary status/image mechanism")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191203223657.22109-2-hmadhani@marvell.com
Signed-off-by: Michael Hernandez <mhernandez@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Bolshakov [Mon, 25 Nov 2019 16:56:54 +0000 (19:56 +0300)]
scsi: qla2xxx: Change discovery state before PLOGI
commit
58e39a2ce4be08162c0368030cdc405f7fd849aa upstream.
When a port sends PLOGI, discovery state should be changed to login
pending, otherwise RELOGIN_NEEDED bit is set in
qla24xx_handle_plogi_done_event(). RELOGIN_NEEDED triggers another PLOGI,
and it never goes out of the loop until login timer expires.
Fixes:
8777e4314d397 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine")
Fixes:
8b5292bcfcacf ("scsi: qla2xxx: Fix Relogin to prevent modifying scan_state flag")
Cc: Quinn Tran <qutran@marvell.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191125165702.1013-6-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Hernandez [Tue, 3 Dec 2019 22:36:56 +0000 (14:36 -0800)]
scsi: qla2xxx: Added support for MPI and PEP regions for ISP28XX
commit
a530bf691f0e4691214562c165e6c8889dc51e57 upstream.
This patch adds support for MPI/PEP region updates which is required with
secure flash updates for ISP28XX.
Fixes:
3f006ac342c0 ("scsi: qla2xxx: Secure flash update support for ISP28XX")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191203223657.22109-3-hmadhani@marvell.com
Signed-off-by: Michael Hernandez <mhernandez@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Bolshakov [Mon, 25 Nov 2019 16:56:52 +0000 (19:56 +0300)]
scsi: qla2xxx: Initialize free_work before flushing it
commit
4c86b037a6db3ad2922ef3ba8a8989eb7794e040 upstream.
Target creation triggers a new BUG_ON introduced in in commit
4d43d395fed1
("workqueue: Try to catch flush_work() without INIT_WORK()."). The BUG_ON
reveals an attempt to flush free_work in qla24xx_do_nack_work before it's
initialized in qlt_unreg_sess:
WARNING: CPU: 7 PID: 211 at kernel/workqueue.c:3031 __flush_work.isra.38+0x40/0x2e0
CPU: 7 PID: 211 Comm: kworker/7:1 Kdump: loaded Tainted: G E 5.3.0-rc7-vanilla+ #2
Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx]
NIP:
c000000000159620 LR:
c0080000009d91b0 CTR:
c0000000001598c0
REGS:
c000000005f3f730 TRAP: 0700 Tainted: G E (5.3.0-rc7-vanilla+)
MSR:
800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR:
24002222 XER:
00000000
CFAR:
c0000000001598d0 IRQMASK: 0
GPR00:
c0080000009d91b0 c000000005f3f9c0 c000000001670a00 c0000003f8655ca8
GPR04:
c0000003f8655c00 000000000000ffff 0000000000000011 ffffffffffffffff
GPR08:
c008000000949228 0000000000000000 0000000000000001 c0080000009e7780
GPR12:
0000000000002200 c00000003fff6200 c000000000161bc8 0000000000000004
GPR16:
c0000003f9d68280 0000000002000000 0000000000000005 0000000000000003
GPR20:
0000000000000002 000000000000ffff 0000000000000000 fffffffffffffef7
GPR24:
c000000004f73848 c000000004f73838 c000000004f73f28 c000000005f3fb60
GPR28:
c000000004f73e48 c000000004f73c80 c000000004f73818 c0000003f9d68280
NIP [
c000000000159620] __flush_work.isra.38+0x40/0x2e0
LR [
c0080000009d91b0] qla24xx_do_nack_work+0x88/0x180 [qla2xxx]
Call Trace:
[
c000000005f3f9c0] [
c000000000159644] __flush_work.isra.38+0x64/0x2e0 (unreliable)
[
c000000005f3fa50] [
c0080000009d91a0] qla24xx_do_nack_work+0x78/0x180 [qla2xxx]
[
c000000005f3fae0] [
c0080000009496ec] qla2x00_do_work+0x604/0xb90 [qla2xxx]
[
c000000005f3fc40] [
c008000000949cd8] qla2x00_iocb_work_fn+0x60/0xe0 [qla2xxx]
[
c000000005f3fc80] [
c000000000157bb8] process_one_work+0x2c8/0x5b0
[
c000000005f3fd10] [
c000000000157f28] worker_thread+0x88/0x660
[
c000000005f3fdb0] [
c000000000161d64] kthread+0x1a4/0x1b0
[
c000000005f3fe20] [
c00000000000b960] ret_from_kernel_thread+0x5c/0x7c
Instruction dump:
3d22001d 892966b1 7d908026 91810008 f821ff71 69290001 0b090000 2e290000
40920200 e9230018 7d2a0074 794ad182 <
0b0a0000>
2fa90000 419e01e8 7c0802a6
---[ end trace
5ccf335d4f90fcb8 ]---
Fixes:
1021f0bc2f3d6 ("scsi: qla2xxx: allow session delete to finish before create.")
Cc: Quinn Tran <qutran@marvell.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191125165702.1013-4-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Bolshakov [Mon, 25 Nov 2019 16:56:50 +0000 (19:56 +0300)]
scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd
commit
f2c9ee54a56995a293efef290657d8a1d80e14ab upstream.
If ABTS cannot be completed in target mode, the driver attempts to free
related management command and crashes:
NIP [
d000000019181ee8] tcm_qla2xxx_free_mcmd+0x40/0x80 [tcm_qla2xxx]
LR [
d00000001dc1e6f8] qlt_response_pkt+0x190/0xa10 [qla2xxx]
Call Trace:
[
c000003fff27bb50] [
c000003fff27bc10] 0xc000003fff27bc10 (unreliable)
[
c000003fff27bb70] [
d00000001dc1e6f8] qlt_response_pkt+0x190/0xa10 [qla2xxx]
[
c000003fff27bc10] [
d00000001dbc2be0] qla24xx_process_response_queue+0x5d8/0xbd0 [qla2xxx]
[
c000003fff27bd50] [
d00000001dbc632c] qla24xx_msix_rsp_q+0x64/0x150 [qla2xxx]
[
c000003fff27bde0] [
c000000000187200] __handle_irq_event_percpu+0x90/0x310
[
c000003fff27bea0] [
c0000000001874b8] handle_irq_event_percpu+0x38/0x90
[
c000003fff27bee0] [
c000000000187574] handle_irq_event+0x64/0xb0
[
c000003fff27bf10] [
c00000000018cd38] handle_fasteoi_irq+0xe8/0x280
[
c000003fff27bf40] [
c000000000185ccc] generic_handle_irq+0x4c/0x70
[
c000003fff27bf60] [
c000000000016cec] __do_irq+0x7c/0x1d0
[
c000003fff27bf90] [
c00000000002a530] call_do_irq+0x14/0x24
[
c00000207d2cba90] [
c000000000016edc] do_IRQ+0x9c/0x130
[
c00000207d2cbae0] [
c000000000008bf4] hardware_interrupt_common+0x114/0x120
--- interrupt: 501 at arch_local_irq_restore+0x74/0x90
LR = arch_local_irq_restore+0x74/0x90
[
c00000207d2cbdd0] [
c0000000001c64fc] tick_broadcast_oneshot_control+0x4c/0x60 (unreliable)
[
c00000207d2cbdf0] [
c0000000007ac840] cpuidle_enter_state+0xf0/0x450
[
c00000207d2cbe50] [
c00000000016b81c] call_cpuidle+0x4c/0x90
[
c00000207d2cbe70] [
c00000000016bc30] do_idle+0x2b0/0x330
[
c00000207d2cbec0] [
c00000000016beec] cpu_startup_entry+0x3c/0x50
[
c00000207d2cbef0] [
c00000000004a06c] start_secondary+0x63c/0x670
[
c00000207d2cbf90] [
c00000000000aa6c] start_secondary_prolog+0x10/0x14
The crash can be triggered by ACL deletion when there's active I/O.
During ACL deletion, qla2xxx performs implicit LOGO that's invisible for
the initiator. Only the driver and firmware are aware of the logout.
Therefore the initiator continues to send SCSI commands and the target
always responds with SAM STATUS BUSY as it can't find the session.
The command times out after a while and initiator invokes ABORT TASK TMF
for the command. The TMF is mapped to ABTS-LS in FCP. The target can't find
session for S_ID originating ABTS-LS so it never allocates mcmd. And since
N_Port handle was deleted after LOGO, it is no longer valid and ABTS
Response IOCB is returned from firmware with status 31. Then free_mcmd is
invoked on NULL pointer and the kernel crashes.
[ 7734.578642] qla2xxx [0000:00:0c.0]-e837:6: ABTS_RECV_24XX: instance 0
[ 7734.578644] qla2xxx [0000:00:0c.0]-f811:6: qla_target(0): task abort (s_id=1:2:0, tag=1209504, param=0)
[ 7734.578645] find_sess_by_s_id: 0x010200
[ 7734.578645] Unable to locate s_id: 0x010200
[ 7734.578646] qla2xxx [0000:00:0c.0]-f812:6: qla_target(0): task abort for non-existent session
[ 7734.578648] qla2xxx [0000:00:0c.0]-e806:6: Sending task mgmt ABTS response (ha=
c0000000d5819000, atio=
c0000000d3fd4700, status=4
[ 7734.578730] qla2xxx [0000:00:0c.0]-e838:6: ABTS_RESP_24XX: compl_status 31
[ 7734.578732] qla2xxx [0000:00:0c.0]-e863:6: qla_target(0): ABTS_RESP_24XX failed 31 (subcode 19:a)
[ 7734.578740] Unable to handle kernel paging request for data at address 0x00000200
Fixes:
6b0431d6fa20b ("scsi: qla2xxx: Fix out of order Termination and ABTS response")
Cc: Quinn Tran <qutran@marvell.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Thomas Abraham <tabraham@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191125165702.1013-2-r.bolshakov@yadro.com
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Mon, 9 Dec 2019 17:34:57 +0000 (09:34 -0800)]
scsi: iscsi: Fix a potential deadlock in the timeout handler
commit
5480e299b5ae57956af01d4839c9fc88a465eeab upstream.
Some time ago the block layer was modified such that timeout handlers are
called from thread context instead of interrupt context. Make it safe to
run the iSCSI timeout handler in thread context. This patch fixes the
following lockdep complaint:
================================
WARNING: inconsistent lock state
5.5.1-dbg+ #11 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi]
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x106/0x240
_raw_spin_lock+0x38/0x50
iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi]
call_timer_fn+0x132/0x470
__run_timers.part.0+0x39f/0x5b0
run_timer_softirq+0x63/0xc0
__do_softirq+0x12d/0x5fd
irq_exit+0xb3/0x110
smp_apic_timer_interrupt+0x131/0x3d0
apic_timer_interrupt+0xf/0x20
default_idle+0x31/0x230
arch_cpu_idle+0x13/0x20
default_idle_call+0x53/0x60
do_idle+0x38a/0x3f0
cpu_startup_entry+0x24/0x30
start_secondary+0x222/0x290
secondary_startup_64+0xa4/0xb0
irq event stamp: 1383705
hardirqs last enabled at (1383705): [<
ffffffff81aace5c>] _raw_spin_unlock_irq+0x2c/0x50
hardirqs last disabled at (1383704): [<
ffffffff81aacb98>] _raw_spin_lock_irq+0x18/0x50
softirqs last enabled at (1383690): [<
ffffffffa0e2efea>] iscsi_queuecommand+0x76a/0xa20 [libiscsi]
softirqs last disabled at (1383682): [<
ffffffffa0e2e998>] iscsi_queuecommand+0x118/0xa20 [libiscsi]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&session->frwd_lock)->rlock);
<Interrupt>
lock(&(&session->frwd_lock)->rlock);
*** DEADLOCK ***
2 locks held by kworker/7:1H/206:
#0:
ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0
#1:
ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0
stack backtrace:
CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: kblockd blk_mq_timeout_work
Call Trace:
dump_stack+0xa5/0xe6
print_usage_bug.cold+0x232/0x23b
mark_lock+0x8dc/0xa70
__lock_acquire+0xcea/0x2af0
lock_acquire+0x106/0x240
_raw_spin_lock+0x38/0x50
iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi]
scsi_times_out+0xf4/0x440 [scsi_mod]
scsi_timeout+0x1d/0x20 [scsi_mod]
blk_mq_check_expired+0x365/0x3a0
bt_iter+0xd6/0xf0
blk_mq_queue_tag_busy_iter+0x3de/0x650
blk_mq_timeout_work+0x1af/0x380
process_one_work+0x56d/0xab0
worker_thread+0x7a/0x5d0
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Fixes:
287922eb0b18 ("block: defer timeouts to a workqueue")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sheebab [Tue, 3 Dec 2019 10:07:15 +0000 (11:07 +0100)]
scsi: ufs: Disable autohibern8 feature in Cadence UFS
commit
d168001d14eccfda229b4a41a2c31a21e3c379da upstream.
This patch disables autohibern8 feature in Cadence UFS. The autohibern8
feature has issues due to which unexpected interrupt trigger is happening.
After the interrupt issue is sorted out, autohibern8 feature will be
re-enabled
Link: https://lore.kernel.org/r/1575367635-22662-1-git-send-email-sheebab@cadence.com
Cc: <stable@vger.kernel.org>
Signed-off-by: sheebab <sheebab@cadence.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikos Tsironis [Wed, 4 Dec 2019 14:07:42 +0000 (16:07 +0200)]
dm thin: Flush data device before committing metadata
commit
694cfe7f31db36912725e63a38a5179c8628a496 upstream.
The thin provisioning target maintains per thin device mappings that map
virtual blocks to data blocks in the data device.
When we write to a shared block, in case of internal snapshots, or
provision a new block, in case of external snapshots, we copy the shared
block to a new data block (COW), update the mapping for the relevant
virtual block and then issue the write to the new data block.
Suppose the data device has a volatile write-back cache and the
following sequence of events occur:
1. We write to a shared block
2. A new data block is allocated
3. We copy the shared block to the new data block using kcopyd (COW)
4. We insert the new mapping for the virtual block in the btree for that
thin device.
5. The commit timeout expires and we commit the metadata, that now
includes the new mapping from step (4).
6. The system crashes and the data device's cache has not been flushed,
meaning that the COWed data are lost.
The next time we read that virtual block of the thin device we read it
from the data block allocated in step (2), since the metadata have been
successfully committed. The data are lost due to the crash, so we read
garbage instead of the old, shared data.
This has the following implications:
1. In case of writes to shared blocks, with size smaller than the pool's
block size (which means we first copy the whole block and then issue
the smaller write), we corrupt data that the user never touched.
2. In case of writes to shared blocks, with size equal to the device's
logical block size, we fail to provide atomic sector writes. When the
system recovers the user will read garbage from that sector instead
of the old data or the new data.
3. Even for writes to shared blocks, with size equal to the pool's block
size (overwrites), after the system recovers, the written sectors
will contain garbage instead of a random mix of sectors containing
either old data or new data, thus we fail again to provide atomic
sectors writes.
4. Even when the user flushes the thin device, because we first commit
the metadata and then pass down the flush, the same risk for
corruption exists (if the system crashes after the metadata have been
committed but before the flush is passed down to the data device.)
The only case which is unaffected is that of writes with size equal to
the pool's block size and with the FUA flag set. But, because FUA writes
trigger metadata commits, this case can trigger the corruption
indirectly.
Moreover, apart from internal and external snapshots, the same issue
exists for newly provisioned blocks, when block zeroing is enabled.
After the system recovers the provisioned blocks might contain garbage
instead of zeroes.
To solve this and avoid the potential data corruption we flush the
pool's data device **before** committing its metadata.
This ensures that the data blocks of any newly inserted mappings are
properly written to non-volatile storage and won't be lost in case of a
crash.
Cc: stable@vger.kernel.org
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikos Tsironis [Wed, 4 Dec 2019 14:07:41 +0000 (16:07 +0200)]
dm thin metadata: Add support for a pre-commit callback
commit
ecda7c0280e6b3398459dc589b9a41c1adb45529 upstream.
Add support for one pre-commit callback which is run right before the
metadata are committed.
This allows the thin provisioning target to run a callback before the
metadata are committed and is required by the next commit.
Cc: stable@vger.kernel.org
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikos Tsironis [Wed, 4 Dec 2019 14:06:54 +0000 (16:06 +0200)]
dm clone: Flush destination device before committing metadata
commit
8b3fd1f53af3591d5624ab9df718369b14d09ed1 upstream.
dm-clone maintains an on-disk bitmap which records which regions are
valid in the destination device, i.e., which regions have already been
hydrated, or have been written to directly, via user I/O.
Setting a bit in the on-disk bitmap meas the corresponding region is
valid in the destination device and we redirect all I/O regarding it to
the destination device.
Suppose the destination device has a volatile write-back cache and the
following sequence of events occur:
1. A region gets hydrated, either through the background hydration or
because it was written to directly, via user I/O.
2. The commit timeout expires and we commit the metadata, marking that
region as valid in the destination device.
3. The system crashes and the destination device's cache has not been
flushed, meaning the region's data are lost.
The next time we read that region we read it from the destination
device, since the metadata have been successfully committed, but the
data are lost due to the crash, so we read garbage instead of the old
data.
This has several implications:
1. In case of background hydration or of writes with size smaller than
the region size (which means we first copy the whole region and then
issue the smaller write), we corrupt data that the user never
touched.
2. In case of writes with size equal to the device's logical block size,
we fail to provide atomic sector writes. When the system recovers the
user will read garbage from the sector instead of the old data or the
new data.
3. In case of writes without the FUA flag set, after the system
recovers, the written sectors will contain garbage instead of a
random mix of sectors containing either old data or new data, thus we
fail again to provide atomic sector writes.
4. Even when the user flushes the dm-clone device, because we first
commit the metadata and then pass down the flush, the same risk for
corruption exists (if the system crashes after the metadata have been
committed but before the flush is passed down).
The only case which is unaffected is that of writes with size equal to
the region size and with the FUA flag set. But, because FUA writes
trigger metadata commits, this case can trigger the corruption
indirectly.
To solve this and avoid the potential data corruption we flush the
destination device **before** committing the metadata.
This ensures that any freshly hydrated regions, for which we commit the
metadata, are properly written to non-volatile storage and won't be lost
in case of a crash.
Fixes:
7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikos Tsironis [Wed, 4 Dec 2019 14:06:53 +0000 (16:06 +0200)]
dm clone metadata: Use a two phase commit
commit
8fdbfe8d1690e8a38d497d83a30607d0d90cc15a upstream.
Split the metadata commit in two parts:
1. dm_clone_metadata_pre_commit(): Prepare the current transaction for
committing. After this is called, all subsequent metadata updates,
done through either dm_clone_set_region_hydrated() or
dm_clone_cond_set_range(), will be part of the next transaction.
2. dm_clone_metadata_commit(): Actually commit the current transaction
to disk and start a new transaction.
This is required by the following commit. It allows dm-clone to flush
the destination device after step (1) to ensure that all freshly
hydrated regions, for which we are updating the metadata, are properly
written to non-volatile storage and won't be lost in case of a crash.
Fixes:
7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikos Tsironis [Wed, 4 Dec 2019 14:06:52 +0000 (16:06 +0200)]
dm clone metadata: Track exact changes per transaction
commit
e6a505f3f9fae572fb3ab3bc486e755ac9cef32c upstream.
Extend struct dirty_map with a second bitmap which tracks the exact
regions that were hydrated during the current metadata transaction.
Moreover, fix __flush_dmap() to only commit the metadata of the regions
that were hydrated during the current transaction.
This is required by the following commits to fix a data corruption bug.
Fixes:
7431b7835f55 ("dm: add clone target")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hou Tao [Tue, 3 Dec 2019 11:42:58 +0000 (19:42 +0800)]
dm btree: increase rebalance threshold in __rebalance2()
commit
474e559567fa631dea8fb8407ab1b6090c903755 upstream.
We got the following warnings from thin_check during thin-pool setup:
$ thin_check /dev/vdb
examining superblock
examining devices tree
missing devices: [1, 84]
too few entries in btree_node: 41, expected at least 42 (block 138, max_entries = 126)
examining mapping tree
The phenomenon is the number of entries in one node of details_info tree is
less than (max_entries / 3). And it can be easily reproduced by the following
procedures:
$ new a thin pool
$ presume the max entries of details_info tree is 126
$ new 127 thin devices (e.g. 1~127) to make the root node being full
and then split
$ remove the first 43 (e.g. 1~43) thin devices to make the children
reblance repeatedly
$ stop the thin pool
$ thin_check
The root cause is that the B-tree removal procedure in __rebalance2()
doesn't guarantee the invariance: the minimal number of entries in
non-root node should be >= (max_entries / 3).
Simply fix the problem by increasing the rebalance threshold to
make sure the number of entries in each child will be greater
than or equal to (max_entries / 3 + 1), so no matter which
child is used for removal, the number will still be valid.
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Snitzer [Tue, 26 Nov 2019 15:08:29 +0000 (10:08 -0500)]
dm mpath: remove harmful bio-based optimization
commit
dbaf971c9cdf10843071a60dcafc1aaab3162354 upstream.
Removes the branching for edge-case where no SCSI device handler
exists. The __map_bio_fast() method was far too limited, by only
selecting a new pathgroup or path IFF there was a path failure, fix this
be eliminating it in favor of __map_bio(). __map_bio()'s extra SCSI
device handler specific MPATHF_PG_INIT_REQUIRED test is not in the fast
path anyway.
This change restores full path selector functionality for bio-based
configurations that don't haave a SCSI device handler. But it should be
noted that the path selectors do have an impact on performance for
certain networks that are extremely fast (and don't require frequent
switching).
Fixes:
8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks")
Cc: stable@vger.kernel.org
Reported-by: Drew Hastings <dhastings@crucialwebhost.com>
Suggested-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Blumenstingl [Sun, 8 Dec 2019 17:18:31 +0000 (18:18 +0100)]
drm: meson: venc: cvbs: fix CVBS mode matching
commit
43cb86799ff03e9819c07f37f72f80f8246ad7ed upstream.
With commit
222ec1618c3ace ("drm: Add aspect ratio parsing in DRM
layer") the drm core started honoring the picture_aspect_ratio field
when comparing two drm_display_modes. Prior to that it was ignored.
When the CVBS encoder driver was initially submitted there was no aspect
ratio check.
Switch from drm_mode_equal() to drm_mode_match() without
DRM_MODE_MATCH_ASPECT_RATIO to fix "kmscube" and X.org output using the
CVBS connector. When (for example) kmscube sets the output mode when
using the CVBS connector it passes HDMI_PICTURE_ASPECT_NONE, making the
drm_mode_equal() fail as it include the aspect ratio.
Prior to this patch kmscube reported:
failed to set mode: Invalid argument
The CVBS mode checking in the sun4i (drivers/gpu/drm/sun4i/sun4i_tv.c
sun4i_tv_mode_to_drm_mode) and ZTE (drivers/gpu/drm/zte/zx_tvenc.c
tvenc_mode_{pal,ntsc}) drivers don't set the "picture_aspect_ratio" at
all. The Meson VPU driver does not rely on the aspect ratio for the CVBS
output so we can safely decouple it from the hdmi_picture_aspect
setting.
Cc: <stable@vger.kernel.org>
Fixes:
222ec1618c3ace ("drm: Add aspect ratio parsing in DRM layer")
Fixes:
bbbe775ec5b5da ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: squashed with drm: meson: venc: cvbs: deduplicate the meson_cvbs_mode lookup code]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208171832.1064772-3-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Zimmermann [Fri, 6 Dec 2019 08:19:01 +0000 (09:19 +0100)]
drm/mgag200: Flag all G200 SE A machines as broken wrt <startadd>
commit
4adf0b49eea926a55fd956ef7d86750f771435ff upstream.
Several MGA G200 SE machines don't respect the value of the startadd
register field. After more feedback on affected machines, neither PCI
subvendor ID nor the internal ID seem to hint towards the bug. All
affected machines have a PCI ID of 0x0522 (i.e., G200 SE A). It was
decided to flag all G200 SE A machines as broken.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes:
1591fadf857c ("drm/mgag200: Add workaround for HW that does not support 'startadd'")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206081901.9938-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Zimmermann [Tue, 26 Nov 2019 10:15:29 +0000 (11:15 +0100)]
drm/mgag200: Add workaround for HW that does not support 'startadd'
commit
1591fadf857cdbaf2baa55e421af99a61354713c upstream.
There's at least one system that does not interpret the value of
the device's 'startadd' field correctly, which leads to incorrectly
displayed scanout buffers. Always placing the active scanout buffer
at offset 0 works around the problem.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: John Donnelly <john.p.donnelly@oracle.com>
Tested-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes:
81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://gitlab.freedesktop.org/drm/misc/issues/7
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-4-tzimmermann@suse.de
[drop debugfs_init callback - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Zimmermann [Tue, 26 Nov 2019 10:15:28 +0000 (11:15 +0100)]
drm/mgag200: Store flags from PCI driver data in device structure
commit
d6d437d97d54c85a1a93967b2745e31dff03365a upstream.
The flags field in struct mga_device has been unused so far. We now
use it to store flag bits from the PCI driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes:
81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Cc: John Donnelly <john.p.donnelly@oracle.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-3-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Zimmermann [Tue, 26 Nov 2019 10:15:27 +0000 (11:15 +0100)]
drm/mgag200: Extract device type from flags
commit
3a8a5aba142a44eaeba0cb0ec1b4a8f177b5e59a upstream.
Adds a conversion function that extracts the device type from the
PCI id-table flags. Allows for storing additional information in the
other flag bits.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101529.20356-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Fri, 29 Nov 2019 13:59:04 +0000 (14:59 +0100)]
drm/panfrost: Fix a race in panfrost_gem_free_object()
commit
aed44cbeae2b7674cd155ba5cc6506aafe46a94e upstream.
panfrost_gem_shrinker_scan() might purge a BO (release the sgt and
kill the GPU mapping) that's being freed by panfrost_gem_free_object()
if we don't remove the BO from the shrinker list at the beginning of
panfrost_gem_free_object().
Fixes:
013b65101315 ("drm/panfrost: Add madvise and shrinker support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129135908.2439529-5-boris.brezillon@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>