drm/i915/dg1: Read OPROM via SPI controller

Read OPROM SPI through MMIO and find VBT entry since we can't use
OpRegion and PCI mapping may not work on some systems due to most BIOSes
not leaving the Option ROM mapped.

v2: Remove message with allocation failure

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216062645.3477854-1-lucas.demarchi@intel.com

drm/i915: Remove unused intel_gmbus_set_speed() function

The intel_gmbus_set_speed() function is not used anywhere, remove it.

Note drivers/gpu/drm/gma500 has its own copy called
gma_intel_gmbus_set_speed() which is used, the intel_gmbus_set_speed()
version in the i915 code is not used at all

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211121191001.252076-1-hdegoede@redhat.com

drm/i915/backlight: Make ext_pwm_disable_backlight() call intel_backlight_set_pwm_level()

At least the Bay Trail LPSS PWM controller used with DSI panels on many
Bay Trail tablets seems to leave the PWM pin in whatever state it was
(high or low) ATM that the PWM gets disabled. Combined with some panels
not having a separate backlight-enable pin this leads to the backlight
sometimes staying on while it should not (when the pin was high during
PWM-disabling).

First calling intel_backlight_set_pwm_level() will ensure that the pin
is always low (or high for inverted brightness panels) since the passed
in duty-cycle is 0% (or 100%) when the PWM gets disabled fixing the
backlight sometimes staying on.

With the exception of ext_pwm_disable_backlight() all other
foo_disable_backlight() functions call intel_backlight_set_pwm_level()
already before disabling the backlight, so this change also aligns
ext_pwm_disable_backlight() with all the other disable() functions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211121110032.4720-2-hdegoede@redhat.com

drm/i915/fbc: Register per-crtc debugfs files

Expose FBC debugfs files for each crtc. These may or may not point
to the same FBC instance depending on the platform.

We leave the old global debugfs files in place until
igt catches up to the new per-crtc approach.

v2: Take a trip via intel_crtc_debugfs_add() (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213151435.9700-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/fbc: Introduce device info fbc_mask

Declare which FBC instances are present via a fbc_mask
in device info. For the moment there is just the one.

TODO: Need to figure out how to expose multiple FBC
instances in debugs. Just different file names, or move
the files under some subdirectory (per-crtc maybe), or
something else? This will need igt changes as well.

v2: Put the mask into device_info.display (Jani)
    Put the magic pipe->fbc thing into skl_fbc_id_for_pipe() (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-4-ville.syrjala@linux.intel.com

drm/i915/fbc: Loop through FBC instances in various places

Convert i915->fbc into an array in preparation for
multiple FBC instances, and loop through all instances
in all places where the caller does not know which
instance(s) (if any) are relevant. This is the case
for eg. frontbuffer tracking and FIFO underrun hadling.

v2: More intel_ namespace (Jani)
    Leave out debugfs for later

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213134450.3082-3-ville.syrjala@linux.intel.com

drm/i915/fbc: Parametrize FBC register offsets

Parametrize ilk+ FBC register offsets based on the FBC instance.

v2: More intel_ namespace (Jani)
v3: Don't break gvt (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211214184616.1410-1-ville.syrjala@linux.intel.com

drm/i915/cdclk: move struct intel_cdclk_funcs to intel_cdclk.c

The funcs struct can be opaque, make it internal to intel_cdclk.c.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-2-jani.nikula@intel.com

drm/i915/cdclk: turn around i915_drv.h and intel_cdclk.h dependency

intel_cdclk.h only needs i915_drv.h for struct intel_cdclk_config. Move
the definition to intel_cdclk.h and turn the includes around to avoid
including i915_drv.h from other headers.

The intel cdclk state macros in intel_cdclk.h still reference struct
drm_i915_private, but as macros they don't strictly require the
definition until they are used.

v2: Expand on the commit message wrt cdclk state macros

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213114106.296017-1-jani.nikula@intel.com

drm/i915: Fix implicit use of struct pci_dev

intel_device_info.h references struct pci_dev but does not ensure that
the struct has been declared, causing build failures if something in
other headers changes so that the implicit dependency it is relying on
is no longer satisfied:

In file included from drivers/gpu/drm/i915/intel_device_info.h:32,
                 from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h:11,
                 from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:11:
drivers/gpu/drm/i915/display/intel_display.h:643:39: error: 'struct pci_dev' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
  643 | bool intel_modeset_probe_defer(struct pci_dev *pdev);
      |                                       ^~~~~~~
cc1: all warnings being treated as errors

Add a declaration of the struct to fix this.

Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94b541f53db1 ("drm/i915: Add intel_modeset_probe_defer() helper")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213170753.3680209-1-broonie@kernel.org

drm/i915: Move pipe/transcoder/abox masks under intel_device_info.display

Collect the dipslay related mask under the display sub-structure
in intel_device_info.

Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.

There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/cdclk: hide struct intel_cdclk_vals

The definition is not needed outside of intel_cdclk.c.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7e7e7fb91eae2b49a0ab5d982a235cec34e3320.1639068649.git.jani.nikula@intel.com

drm/i915/cdclk: move intel_atomic_check_cdclk() to intel_cdclk.c

Rename to intel_cdclk_atomic_check() and make
intel_cdclk_bw_calc_min_cdclk() static.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/43ad4d437121f43d76c790ac5d4d131743d58988.1639068649.git.jani.nikula@intel.com

drm/i915/pxp: remove useless includes

Not needed.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/01c4ea0cea17eead027c83dc9eaca3c181ce3a24.1639142167.git.jani.nikula@intel.com

drm/i915/pxp: un-inline intel_pxp_is_enabled()

In the interest of reducing include dependencies, un-inline
intel_pxp_is_enabled().

v2: Fix build for CONFIG_DRM_I915_PXP=n

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36bbb3708f3b1f84f0718afff94212dde93cb479.1639142167.git.jani.nikula@intel.com

drm/i915/fb: reduce include dependencies

We actually need i915_active_types.h, not i915_active.h.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aed5f1afda4448ec46c7ff1f95291edebf355790.1639142167.git.jani.nikula@intel.com

drm/i915/fbc: avoid intel_frontbuffer.h include with declaration

Reduce include dependencies using forward declarations.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb54050e03f830a1b29eb14cb37466f39c499cc2.1639142167.git.jani.nikula@intel.com

drm/i915/psr: avoid intel_frontbuffer.h include with declaration

Reduce include dependencies using forward declarations.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee35f2f01f731c21f24a238f2d1690b09ac2da1f.1639142167.git.jani.nikula@intel.com

drm/i915/active: remove useless i915_utils.h include

Not needed.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/52b1cf56c16bf669a1357ce81d9232c5480914a4.1639142167.git.jani.nikula@intel.com

drm/i915/reset: include intel_display.h instead of intel_display_types.h

Use the more specific include that's needed.

v2: Include intel_display.h (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e1e195b8ca1252d1e149c8185d107a5517496973.1639142167.git.jani.nikula@intel.com

drm/i915/display: Fix an unsigned subtraction which can never be negative.

smatch warning:
drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn:
unsigned 'fw->size - offset' is never less than zero

Firmware size is size_t and offset is u32. So the subtraction is
unsigned which can never be less than zero.

Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210044129.12422-1-harshit.m.mogalapalli@oracle.com

drm/i915: Add privacy-screen support (v3)

Add support for eDP panels with a built-in privacy screen using the
new drm_privacy_screen class.

Changes in v3:
- Move drm_privacy_screen_get() call to intel_ddi_init_dp_connector()

Changes in v2:
- Call drm_connector_update_privacy_screen() from
  intel_enable_ddi_dp() / intel_ddi_update_pipe_dp() instead of adding a
  for_each_new_connector_in_state() loop to intel_atomic_commit_tail()
- Move the probe-deferral check to the intel_modeset_probe_defer() helper

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-11-hdegoede@redhat.com

drm/i915: Add intel_modeset_probe_defer() helper

The upcoming privacy-screen support adds another check for
deferring probe till some other drivers have bound first.

Factor out the current vga_switcheroo_client_probe_defer() check
into an intel_modeset_probe_defer() helper, so that further
probe-deferral checks can be added there.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005202322.700909-10-hdegoede@redhat.com

drm/i915: s/intel_get_first_crtc/intel_first_crtc/

Since we got rid of the "_get_" from intel_get_crtc_for_pipe()
let's do the same for intel_get_first_crtc() for consistency.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203112029.1057-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Relocate intel_crtc_for_plane()

Move intel_crtc_for_plane() next to its only user. No one
else should ever use this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203112029.1057-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Nuke {pipe,plane}_to_crtc_mapping[]

These plane/pipe->crtc mapping arrays are rather pointless.
Get rid of them and just iterate the lists instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203112029.1057-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-next

Get the dependencies for merging drm-privacy-screen support.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/trace: split out display trace to a separate file

Add display/intel_display_trace.[ch] for defining display
tracepoints. The main goal is to reduce cross-includes between gem and
display. It would be possible split up tracing even further, but that
would lead to more boilerplate.

We end up having to include intel_crtc.h in a few places because it was
pulled in implicitly via intel_de.h -> i915_trace.h -> intel_crtc.h, and
that's no longer the case.

There should be no changes to tracepoints.

v3:
- Rebase

v2:
- Define TRACE_INCLUDE_PATH relative to define_trace.h (Chris)
- Remove useless comments (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7862ad764fbd0748d903c76bc632d3d277874e5b.1638961423.git.jani.nikula@intel.com

drm/i915/trace: clean up boilerplate organization

Follow the style that seems to be prevalent in kernel for undef and
define of TRACE_SYSTEM, TRACE_INCLUDE_PATH, and TRACE_INCLUDE_FILE.

There should be no changes to tracepoints.

v2: Keep TRACE_INCLUDE_PATH relative to define_trace.h (Chris)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0d37790ee70fb60be6f6a73d8bde2013510a7ad8.1638961423.git.jani.nikula@intel.com

Merge tag 'drm-misc-next-2021-11-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.17:

UAPI Changes:

Cross-subsystem Changes:

 * Move 'nomodeset' kernel boot option into DRM subsystem

Core Changes:

 * Replace several DRM_*() logging macros with drm_*() equivalents
 * panel: Add quirk for Lenovo Yoga Book X91F/L
 * ttm: Documentation fixes

Driver Changes:

 * Cleanup nomodeset handling in drivers
 * Fixes
 * bridge/anx7625: Fix reading EDID; Fix error code
 * bridge/megachips: Probe both bridges before registering
 * vboxvideo: Fix ERR_PTR usage

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YaSVz15Q7dAlEevU@linux-uq9g.fritz.box

drm/i915/dmc: Update DMC to v2.14 on ADL-P

Changes since v2.12:
  - Release notes for v2.13:
      1. Fix for simple flip queue with DC6v
  - Release notes for v2.14:
      1. Fix for flip queue roll over cases with DC6v
      2. Enhancement for residency
      3. Workaround for 3Dlut restore issue

v2: Commit message update (Imre)

Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208213115.1919503-1-lucas.demarchi@intel.com

drm/i915: Skip remap_io_mapping() for non-x86 platforms

Only hw that supports mappable aperture would hit this path
vm_fault_gtt/vm_fault_tmm, So we never hit this function
remap_io_mapping() in discrete, So skip this code for non-x86
architectures.

v2: use IS_ENABLED () instead of #if defined

v3: move function prototypes from i915_drv.h to i915_mm.h

v4: added kernel error message in stub function

v5: fixed compilation warnings

v6: checkpatch style

Signed-off-by: Siva Mullati <siva.mullati@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208041215.763098-1-siva.mullati@intel.com

drm/i915/rpl-s: Enable guc submission by default

Though, RPL-S is defined as subplatform of ADL-S, unlike
ADL-S, it has GuC submission by default.

v2: Remove extra parenthesis (Jani)
v3: s/IS_RAPTORLAKE/IS_ADLS_RPLS (Jani)

Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203063545.2254380-4-anusha.srivatsa@intel.com

drm/i915/rpl-s: Add PCH Support for Raptor Lake S

Add the PCH ID for RPL-S.

v2: Self contained commit message (Jani)

Cc: dri-devel@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203063545.2254380-3-anusha.srivatsa@intel.com

drm/i915/rpl-s: Add PCI IDS for Raptor Lake S

Raptor Lake S(RPL-S) is a version 12
Display, Media and Render. For all i915
purposes it is the same as Alder Lake S (ADL-S).

Introduce RPL-S as a subplatform
of ADL-S. This patch adds PCI ids for RPL-S.

BSpec: 53655
Cc: x86@kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # arch/x86
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203063545.2254380-2-anusha.srivatsa@intel.com

drm/i915: Allow cdclk squasher to be reconfigured live

Supposedly we should be able to change the cdclk squasher waveform
even when many pipes are active. Make it so.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-6-mika.kahola@intel.com

drm/i915/display/dg2: Read CD clock from squasher table

To calculate CD clock with squasher unit, we set CD clock ratio to fixed value of 34.
The CD clock value is read from CD clock squasher table.

BSpec: 54034

v2: Read ratio from register (Ville)
    Drop unnecessary local variable (Ville)
    Get CD clock from the given table
v3: Calculate CD clock frequency based on waveform bit pattern (Ville)
[v4: vsyrjala: Actually do a proper blind readout from the hardware]
[v5: vsyrjala: Use has_cdclk_squasher()]

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-5-mika.kahola@intel.com

drm/i915/display/dg2: Set CD clock squashing registers

Set CD clock squashing registers based on selected CD clock.

v2: use slk_cdclk_decimal() to compute decimal values instead of a
    specific table (Ville)
    Set waveform based on CD clock table (Ville)
    Drop unnecessary local variable (Ville)
v3: Correct function naming (Ville)
    Correct if-else structure (Ville)
[v4: vsyrjala: Fix spaces vs. tabs]
[v5: vsyrjala: Fix cd2x divider calculation (Uma),
               Add warn to waveform lookup (Uma),
               Handle bypass freq in waveform lookup,
               Generalize waveform handling in bxt_set_cdclk()]

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-4-mika.kahola@intel.com

drm/i915/display/dg2: Sanitize CD clock

In case of CD clock squashing the divider is always 1. We don't
need to calculate the divider in use so let's skip that for DG2.

v2: Drop unnecessary local variable (Ville)
v3: Avoid if-else structure (Ville)
[v4: vsyrjala: Fix cd2x divider calculation (Uma),
               Introduce has_cdclk_squasher()]

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-3-mika.kahola@intel.com

drm/i915/display/dg2: Introduce CD clock squashing table

For CD clock squashing method, we need to define corresponding CD clock table for
reference clocks, dividers and ratios for all CD clock options.

BSpec: 54034

v2: Add CD squashing waveforms as part of CD clock table (Ville)
v3: Waveform is 16 bits wide (Ville)
[v4: vsyrjala: Nuke the non-squasher based table,
               Set .divider=2 for consistency,
       Pack intel_cdclk_vals a bit nicer]
v5: Fix error in waveform value (Swati)
v6 (Lucas): Rebase on upstream
v7 (MattR): Drop 40.8, 81.6, and 122.4 MHz frequencies to reflect new
    bspec update.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119131348.725220-2-mika.kahola@intel.com

drm/i915/ddi: add use_edp_hobl() and use_edp_low_vswing() helpers

Localize HOBL and low vswing VBT lookups to a couple of small helpers,
and get rid of a bunch of local variables.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203131318.2885969-1-jani.nikula@intel.com

drm/i915/snps: use div32 version of MPLLB word clock for UHBR

The mode set sequence for 128b/132b requires setting the div32 version
of MPLLB clock.

Bspec: 53880, 54128
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202144456.2541305-1-jani.nikula@intel.com

drm/i915/xelpd: Add Pipe Color Lut caps to platform config

XE_LPD has 128 Lut entries for Degamma, with additional 3 entries for
extended range. It has 511 entries for gamma with additional 2 entries
for extended range.

v2: Updated lut size for 10bit gamma, added lut_tests (Ville)

v3: Dropped the gamma lut tests fields (Ville)

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-4-uma.shankar@intel.com

drm/i915/xelpd: Enable Pipe Degamma

Enable Pipe Degamma for XE_LPD. Extend the legacy implementation
to incorparate the extended lut size for XE_LPD.

v2: Added a helper for degamma lut size (Ville)

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-3-uma.shankar@intel.com

drm/i915/xelpd: Enable Pipe color support for D13 platform

Enable pipe color support for Display 13 platforms. Currently
limit to just 10bit gamma and later extend it for logarithmic
gamma, once the new UAPI is agreed by community and implemented
by a userspace consumer.

v2: Updated dev_priv to i915 (Ville)

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207071135.3660332-2-uma.shankar@intel.com

drm/i915/dmc: Change max DMC FW size on ADL-P

Increase the max size of DMC on ADL-P to account for support of new
features in the current/upcoming DMC versions.

Signed-off-by: Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207023718.322349-1-madhumitha.tolakanahalli.pradeep@intel.com

drm/i915/adlp: Remove require_force_probe protection

Remove force probe protection from ADL_P platform. Did not obsevre
warnings, errors, flickering or any visual defects while doing ordinary
tasks like browsing and editing documents in a two monitor setup.

For more info drm-tip idle run results :
https://intel-gfx-ci.01.org/tree/drm-tip/drmtip.html?

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211204010140.22839-1-clinton.a.taylor@intel.com

drm/i915/adl_p: Add ddc pin mapping

From VBT, ddc pin info suggests the following mapping:
    VBT                                    DRIVER
    DDI TC1->ddc_pin=3 should translate to PORT_TC1->0x9
    DDI TC2->ddc_pin=4 should translate to PORT_TC2->0xa
    DDI TC3->ddc_pin=5 should translate to PORT_TC3->0xb
    DDI TC4->ddc_pin=6 should translate to PORT_TC4->0xc

Adding pin map to facilitate this translation as we cannot use existing
icl ddc pin map due to conflict with DDI C and DDI TC1 info.

Bspec:20124

v2:
  - Changed Author to Tejas Upadhyay

Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Raviteja Goud Talla <ravitejax.goud.talla@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203073720.3823371-1-ravitejax.goud.talla@intel.com

drm/i915: Get rid of the "sizes are 0 based" stuff

Replace the "sizes are 0 based" stuff with just straight
up -1 where needed. Less confusing all around.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/fbc: Pimp the FBC debugfs output

Now that each plane tracks its own no_fbc_reason we can print that
out in debugfs, and we can also show which plane is currently
selected for FBC duty.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-21-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/fbc: No FBC+double wide pipe

FBC and double wide pipe are mutually exclusive. Disable FBC when
we have to resort to double wide.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-20-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: s/parms/fbc_state/

Rename the 'params' to just fbc state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-19-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Move plane pointer into intel_fbc_state

Currently we track the FBC plane as a pointer under intel_fbc
and also as a i9xx_plane_id under intel_fbc_state. Just store
the pointer once in the fbc state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-18-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Nuke state_cache

fbc->state_cache has now become useless. We can simply update
the reg params directly from the plane/crtc states during
__intel_fbc_enable().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-17-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Disable FBC fully on FIFO underrun

Currently a FIFO underrun just causes FBC to be deactivated,
and later checks then prevent it from being reactivated. We
can simpify our lives a bit by logically disabling FBC on
FIFO underruns. This avoids the funny intermediate state where
FBC is logically enabled but can't actually be activated.

v2: intel_wait_for_vblank() is no more

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-16-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Move stuff from intel_fbc_can_enable() into intel_fbc_check_plane()

Don't really see a good reason why we can't just do the vgpu and
modparam checks already in intel_fbc_check_plane().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-15-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Allocate intel_fbc dynamically

In the future we may have more than one FBC instance on some
platforms. So let's just allocate it dynamically. This also
lets us fully hide the implementation from prying eyes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-14-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Introduce intel_fbc_add_plane()

In order to better encapsulate the FBC implementation
introduce a small helper to do the plane<->FBC instance
association.

We'll also try to structure the plane init code such
that introducing multiple FBC instances will be easier
down the line.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-13-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Move FBC debugfs stuff into intel_fbc.c

In order to encapsulate FBC harder let's just move the debugfs
stuff into intel_fbc.c.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-12-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/fbc: Pass i915 instead of FBC instance to FBC underrun stuff

The underrun code doesn't need to know any details about FBC, so
just pass in the whole device rather than a specific FBC instance.
We could make this a bit more fine grained by also passing in the
pipe to intel_fbc_handle_fifo_underrun_irq() and letting the FBC
code figure which FBC instance (if any) is active on said pipe.
But that seems a bit overkill for this so don't bother.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-11-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Flatten __intel_fbc_pre_update()

Use an early return to flatten most of __intel_fbc_pre_update().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-10-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Track FBC usage per-plane

In the future we may have multiple planes on the same pipe
capable of using FBC. Prepare for that by tracking FBC usage
per-plane rather than per-crtc.

v2: s/intel_get_crtc_for_pipe/intel_crtc_for_pipe/

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-9-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Pass around FBC instance instead of crtc

Pass the FBC instance instead of the crtc to a bunch of places.

We also adjust intel_fbc_post_update() to do the
intel_fbc_get_reg_params() things instead of doing it from the lower
level function (which also gets called for front buffer tracking).
Nothing in there will change during front buffer updates.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-8-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Reuse the same struct for the cache and params

The FBC state cache and params are now nearly identical. Just
use the same structure for both.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Nuke more FBC state

There isn't a good reason why we'd have to cache all this
plane state stuff in the FBC state. Instead we can just
pre-calculate what FBC will really need.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Relocate intel_fbc_override_cfb_stride()

Move intel_fbc_override_cfb_stride() next to its cousins.
Helps with later patches.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Nuke lots of crap from intel_fbc_state_cache

There's no need to store all this stuff in intel_fbc_state_cache.
Just check it all against the plane/crtc states and store only
what we need. Probably more should get nuked still, but this
is a start.

So what we'll do is:
- each plane will check its own state and update its local
  no_fbc_reason
- the per-plane no_fbc_reason (if any) then gets propagated
  to the cache->no_fbc_reason while doing the actual update
- fbc->no_fbc_reason gets updated in the end with either
  the value from the cache or directly from frontbuffer
  tracking

It's still a bit messy, but should hopefuly get cleaned up
more in the future. At least now we can observe each plane's
reasons for rejecting FBC now more consistently, and we don't
have so mcuh redundant state store all over the place.

v2: store no_fbc_reason per-plane instead of per-pipe

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Pass whole plane state to intel_fbc_min_limit()

No reason to burden the caller with the details on how the minimum
compression limit is calculated, so just pass in the whole plane
state instead of just the cpp value.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915/fbc: Eliminate racy intel_fbc_is_active() usage

The ilk fbc watermark computation uses intel_fbc_is_active() which
is racy since we don't know whether FBC will be enabled or not at
some point. So let's just assume it will be if both HAS_FBC()
and the modparam agree.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124113652.22090-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>

drm/i915: Rename PLANE_CUS_CTL Y plane bits

Rename the PLANE_CUS_CTL Y plane selection bits to actually
say "Y plane".

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Rename plane YUV order bits

Rename the YUV byte order bits to be a bit more consistent.

v2: Deal with gvt

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Get rid of the 64bit PLANE_CC_VAL mmio

Let's just stick to 32bit mmio accesses so we can get rid
of the bare "uncore" reg access in display code. The register
are defined as 32bit in the spec anyway.

We could define a 64bit "de" variant I suppose, but doesn't
really make much sense just for this one case, and when we
start to use the DSB for this stuff we'd also need another
64bit variant for that. Just easier to do 32bit always.

While at it we can reorder stuff a bit so that we write the
registers in order of increasing offset (more or less).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201152552.7821-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/display: stop including i915_drv.h from intel_display_types.h

Break the dependency on i915_drv.h.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee740f494e416d875e057c2eda585f4e66d65500.1638366969.git.jani.nikula@intel.com

drm/i915/display: convert dp_to_i915() to a macro

Avoid looking into the guts of struct drm_i915_private in
headers. Again, converting an inline function to a macro is less than
ideal, but avoids having to pull in i915_drv.h just for the to_i915()
part.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed6c43455d13c90ebfed442b196625af5e6ede88.1638366969.git.jani.nikula@intel.com

drm/i915: move enum hpd_pin to intel_display.h

It's not the ideal location, but a better alternative than
i915_drv.h. The goal is to break the intel_display_types.h to i915_drv.h
dependency.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9f882eff78cdc6b28c18e73f5e53f57e413240dc.1638366969.git.jani.nikula@intel.com

drm/i915: split out intel_pm_types.h

This is far from ideal, but it reduces the i915_drv.h dependency from
intel_display_types.h. Maybe in the future we'll need a better split.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c6c60d9a8f6dcd1fa2f4b187000c5bb6843a1371.1638366969.git.jani.nikula@intel.com

drm/i915/fb: move intel_fb_uses_dpt to intel_fb.c and un-inline

Move fb functions where they belong, and un-inline to avoid looking into
struct drm_i915_private guts in header files.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4aa89f113ce6d840d62f50c989e2a1415483557c.1638366969.git.jani.nikula@intel.com

drm/i915/crtc: un-inline some crtc functions and move to intel_crtc.[ch]

Move a number of crtc/pipe related functions to intel_crtc.[ch], and
un-inline to avoid looking into struct drm_i915_private guts in header
files.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c0be2adc4a7f7e72a47e12a57f742aaa42b813e6.1638366969.git.jani.nikula@intel.com

drm/i915/selftest: Disable IRQ for timestamp calculation

gt_pm selftest calculates engine ticks cycles and wall time
cycles by delta of respective engine elapsed TIMESTAMP and ktime
for period of 1000us.
It compares the engine ticks cycles with wall time cycles.

Disable local cpu interrupt so that interrupt handler does not
switch out the thread during measure_clocks() and prevent
miscalculation of engine tick cycles.

v2:
- nuke preempt_{disable,enable}, as disable_local_irq()
  disable the preemption. (Chris)

Cc: Chris P Wilson <chris.p.wilson@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130132005.6305-1-anshuman.gupta@intel.com

drm/i915/dg2: extend Wa_1409120013 to DG2

Extend existing workaround 1409120013 to DG2.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116174818.2128062-6-matthew.d.roper@intel.com

drm/i915/dg2: Add Wa_14010547955

This workaround is documented a bit strangely in the bspec; it's listed
as an A0 workaround, but the description clarifies that the workaround
is implicitly handled by the hardware and what the driver really needs
to do is program a chicken bit to reenable some internal behavior.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116174818.2128062-3-matthew.d.roper@intel.com

drm/i915/dg2: s/DISP_STEPPING/DISPLAY_STEPPING/

Commit cd0fcf5af791 ("drm/i915: rename DISP_STEPPING->DISPLAY_STEP and
GT_STEPPING->GT_STEP") renamed all platforms' display stepping tests,
but the DG2 patches were still in-flight at that time and did not
incorporate the new naming scheme.  Rename DG2's macro now for
consistency with other platforms.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116174818.2128062-2-matthew.d.roper@intel.com

drm/i915: Add PLANE_CUS_CTL restriction in max_width

PLANE_CUS_CTL has a restriction of 4096 width even though
PLANE_SIZE and scaler size registers supports max 5120.
Take care of this restriction in max_width.

Without this patch, when 5k content is sent on HDR plane
with NV12 content, FIFO underrun is seen and screen blanks
out.

v2: Addressed review comments from Ville. Added separate
functions for max_width - for HDR and SDR

v3: Addressed review comments from Ville. Changed names of
HDR and SDR max_width functions to icl_hdr_plane_max_width
and icl_sdr_plane_max_width

v4: Fixed paranthesis alignment. No code change

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
[vsyrjala: Fix alignment]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202110836.17536-1-vidya.srinivas@intel.com

drm/i915/display: remove intel_wait_for_vblank()

There are only three call sites remaining for
intel_wait_for_vblank(). Remove the function, and open code it to avoid
new users from showing up.

v2:
- Use intel_crtc_wait_for_next_vblank() (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aabcda1208072a732d7796e6dacce37dca9bb843.1638366969.git.jani.nikula@intel.com

drm/i915/crtc: rename intel_get_crtc_for_plane() to intel_crtc_for_plane()

The "get" in the name implies reference counting, remove it. This also
makes the function conform to naming style.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/50359b38c0eabe262ff31c9ec35c97aa5dfb7fef.1638366969.git.jani.nikula@intel.com

drm/i915/crtc: rename intel_get_crtc_for_pipe() to intel_crtc_for_pipe()

The "get" in the name implies reference counting, remove it. This also
makes the function conform to naming style.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6105d0ff44efac3c999af6382e4b0729e251f1e1.1638366969.git.jani.nikula@intel.com

drm/i915/display: add intel_crtc_wait_for_next_vblank() and use it

intel_wait_for_vblank() goes through a pipe to crtc lookup, while in
most cases we already have the crtc available. Avoid the extra lookups
by adding an intel_crtc based helper.

v2:
- Add intel_crtc_wait_for_next_vblank() helper (Ville)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/90cfbd8c3e79a742b0ee9e3ae75493acb0785dbb.1638366969.git.jani.nikula@intel.com

Merge tag 'drm-intel-next-2021-11-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

drm/i915 feature pull for v5.17:

Features and functionality:
- Implement per-lane DP drive settings for ICL+ (Ville)
- Enable runtime pm autosuspend by default (Tilak Tangudu)
- ADL-P DSI support (Vandita)
- Add support for pipe C and D DMC firmware (Anusha)
- Implement (near)atomic gamma LUT updates via vblank workers (Ville)
- Split plane updates to noarm+arm phases (Ville)
- Remove the CCS FB stride restrictions on ADL-P (Imre)
- Add PSR selective fetch support for biplanar formats (Jouni)
- Add support for display audio codec keepalive (Kai)
- VRR platform support for display 11 (Manasi)

Refactoring and cleanups:
- FBC refactoring and cleanups preparing for multiple FBC instances (Ville)
- PCH modeset refactoring, move to its own file (Ville)
- Refactor and simplify handling of modifiers (Imre)
- PXP cleanups (Ville)
- Display header and include refactoring (Jani)
- Some register macro cleanups (Ville)
- Refactor DP HDMI DFP limit code (Ville)

Fixes:
- Disable DSB usage for now due to incorrect gamma LUT updates (Ville)
- Check async flip state of every crtc and plane only once (José)
- Fix DPT FB suspend/resume (Imre)
- Fix black screen on reboot due to disabled DP++ TMDS output buffers (Ville)
- Don't request GMBUS to generate irqs when called while irqs are off (Ville)
- Fix type1 DVI DP dual mode adapter heuristics for modern platforms (Ville)
- Fix fix integer overflow in 128b/132b data rate calculation (Jani)
- Fix bigjoiner state readout (Ville)
- Build fix for non-x86 (Siva)
- PSR fixes (José, Jouni, Ville)
- Disable ADL-P underrun recovery (José)
- Fix DP link parameter usage before valid DPCD (Imre)
- VRR vblank and frame counter fixes (Ville)
- Fix fastsets on TypeC ports following a non-blocking modeset (Imre)
- Compiler warning fixes (Nathan Chancellor)
- Fix DSI HS mode commands (William Tseng)
- Error return fixes (Dan Carpenter)
- Update memory bandwidth calculations (Radhakrishna)
- Implement WM0 cursor WA for DG2 (Stan)
- Fix DSI Double pixelclock on read-back for dual-link panels (Hans de Goede)
- HDMI 2.1 PCON FRL configuration fixes (Ankit)

Merges:
- DP link training delay helpers, via topic branch (Jani)
- Backmerge drm-next (Jani)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v909it0t.fsf@intel.com

drm/i915/dp: Perform 30ms delay after source OUI write

While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.

Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.

This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.

V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com

drm/i915: Fix DPT suspend/resume on !HAS_DISPLAY platforms

The drm.mode_config state is not initialized in case of !HAS_DISPLAY
so taking the fb_lock and iterating the fb list won't work on those
platforms. Skip the suspend/resume with an explicit check for this.

Fixes: 9755f055f512 ("drm/i915: Restore memory mapping for DPT FBs across system suspend/resume")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211125171603.1775179-1-imre.deak@intel.com

drm: Fix build error caused by missing drm_nomodeset.o

The patch for commit 6a2d2ddf2c34 ("drm: Move nomodeset kernel parameter
to the DRM subsystem") was generated with config 'diff.noprefix true'.

But later was applied using 'cat nomodeset.mbox | dim apply-branch' on a
machine with 'diff.noprefix false'. And command 'git am --scissors -3' as
used by the dim tool doesn't handle that case well, since the 3-way merge
wrongly resolves the path for new file drivers/gpu/drm/drm_nomodeset.c as
gpu/drm/drm_nomodeset.c instead.

It led to the following build error as reported by the kernel test robot:

  make[4]: *** No rule to make target 'drivers/gpu/drm/drm_nomodeset.o', needed by 'drivers/gpu/drm/built-in.a'.

Fixes: 6a2d2ddf2c34 ("drm: Move nomodeset kernel parameter to the DRM subsystem")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211127191910.709356-1-javierm@redhat.com

drm: Make the nomodeset message less sensational

The message printed when nomodeset is present in the kernel command line
makes it look as if the parameter must never be used and it's a bad idea.

But there are valid reasons to use this parameter and the message should
not imply otherwise. Change the text to be more accurate and restrained.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-7-javierm@redhat.com

Documentation/admin-guide: Document nomodeset kernel parameter

The nomodeset kernel command line parameter is not documented. Its name
is quite vague and is not intuitive what's the behaviour when it is set.

Document in kernel-parameters.txt what actually happens when nomodeset
is used. That way, users could know if they want to enable this option.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-6-javierm@redhat.com

drm: Decouple nomodeset from CONFIG_VGA_CONSOLE

This relationship was only for historical reasons and the nomodeset option
should be available even on platforms that don't enable CONFIG_VGA_CONSOLE.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-5-javierm@redhat.com

drm: Move nomodeset kernel parameter to the DRM subsystem

The "nomodeset" kernel cmdline parameter is handled by the vgacon driver
but the exported vgacon_text_force() symbol is only used by DRM drivers.

It makes much more sense for the parameter logic to be in the subsystem
of the drivers that are making use of it.

Let's move the vgacon_text_force() function and related logic to the DRM
subsystem. While doing that, rename it to drm_firmware_drivers_only() and
make it return true if "nomodeset" was used and false otherwise. This is
a better description of the condition that the drivers are testing for.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com

drm/vboxvideo: Drop CONFIG_VGA_CONSOLE guard to call vgacon_text_force()

It is already handled by the console.h macro since a stub inline function
is defined for vgacon_text_force() if CONFIG_VGA_CONSOLE is not set.

There's no need to have ifdefery in the driver when calling the function.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-3-javierm@redhat.com

drm: Don't print messages if drivers are disabled due nomodeset

The nomodeset kernel parameter handler already prints a message that the
DRM drivers will be disabled, so there's no need for drivers to do that.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-2-javierm@redhat.com

drm: get rid of DRM_DEBUG_* log calls in drm core, files drm_a*.c

DRM_DEBUG_* and DRM_* log calls are deprecated.
Change them to drm_dbg_* / drm_{err,info,...} calls in drm core
files.

To avoid making a very big patch, this change is split in
smaller patches. This one includes drm_a*.c

Signed-off-by: Claudio Suarez <cssk@net-c.es>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YaC7zXW119tlzfVh@gineta.localdomain

drm/bridge: megachips: Ensure both bridges are probed before registration

In the configuration used by the b850v3, the STDP2690 is used to read EDID
data whilst it's the STDP4028 which can detect when monitors are connected.

This can result in problems at boot with monitors connected when the
STDP4028 is probed first, a monitor is detected and an attempt is made to
read the EDID data before the STDP2690 has probed:

[    3.795721] Unable to handle kernel NULL pointer dereference at virtual address 00000018
[    3.803845] pgd = (ptrval)
[    3.806581] [00000018] *pgd=00000000
[    3.810180] Internal error: Oops: 5 [#1] SMP ARM
[    3.814813] Modules linked in:
[    3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1
[    3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[    3.830705] Workqueue: events_unbound deferred_probe_work_func
[    3.836565] PC is at stdp2690_get_edid+0x44/0x19c
[    3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c
[    3.846526] pc : [<805eae10>]    lr : [<805eb138>]    psr: 80000013
[    3.852802] sp : 81c359d0  ip : 7dbb550b  fp : 81c35a1c
[    3.858037] r10: 81c73840  r9 : 81c73894  r8 : 816d9800
[    3.863270] r7 : 00000000  r6 : 81c34000  r5 : 00000000  r4 : 810c35f0
[    3.869808] r3 : 80e3e294  r2 : 00000080  r1 : 00000cc0  r0 : 81401180
[    3.876349] Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    3.883499] Control: 10c5387d  Table: 1000404a  DAC: 00000051
[    3.889254] Register r0 information: slab kmem_cache start 81401180 pointer offset 0
[    3.897034] Register r1 information: non-paged memory
[    3.902097] Register r2 information: non-paged memory
[    3.907160] Register r3 information: non-slab/vmalloc memory
[    3.912832] Register r4 information: non-slab/vmalloc memory
[    3.918503] Register r5 information: NULL pointer
[    3.923217] Register r6 information: non-slab/vmalloc memory
[    3.928887] Register r7 information: NULL pointer
[    3.933601] Register r8 information: slab kmalloc-1k start 816d9800 pointer offset 0 size 1024
[    3.942244] Register r9 information: slab kmalloc-2k start 81c73800 pointer offset 148 size 2048
[    3.951058] Register r10 information: slab kmalloc-2k start 81c73800 pointer offset 64 size 2048
[    3.959873] Register r11 information: non-slab/vmalloc memory
[    3.965632] Register r12 information: non-paged memory
[    3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval))
[    3.977148] Stack: (0x81c359d0 to 0x81c36000)
[    3.981517] 59c0:                                     80b2b668 80b2b5bc 000002e2 0000034e
[    3.989712] 59e0: 81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0
[    3.997906] 5a00: 00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8
[    4.006099] 5a20: 810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848
[    4.014292] 5a40: 00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800
[    4.022485] 5a60: 81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000
[    4.030678] 5a80: 00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000
[    4.038870] 5aa0: 816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8
[    4.047062] 5ac0: 00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0
[    4.055255] 5ae0: 8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950
[    4.063447] 5b00: 00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059
[    4.071639] 5b20: 816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400
[    4.079831] 5b40: 00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008
[    4.088024] 5b60: 82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340
[    4.096216] 5b80: 826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000
[    4.104408] 5ba0: 00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4
[    4.112601] 5bc0: 81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40
[    4.120793] 5be0: 81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800
[    4.128985] 5c00: 00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28
[    4.137178] 5c20: 805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700
[    4.145370] 5c40: 816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68
[    4.153565] 5c60: 805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88
[    4.161758] 5c80: 805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0
[    4.169950] 5ca0: 81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60
[    4.178144] 5cc0: 81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58
[    4.186338] 5ce0: 80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c
[    4.194531] 5d00: 80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800
[    4.202724] 5d20: 815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48
[    4.210918] 5d40: 805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c
[    4.219112] 5d60: 81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90
[    4.227305] 5d80: 81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0
[    4.235498] 5da0: 81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8
[    4.243691] 5dc0: 808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c
[    4.251884] 5de0: 81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810
[    4.260076] 5e00: 00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c
[    4.268269] 5e20: 80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c
[    4.276461] 5e40: 81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68
[    4.284654] 5e60: 8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080
[    4.292847] 5e80: 810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650
[    4.301040] 5ea0: 81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90
[    4.309233] 5ec0: 81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800
[    4.317425] 5ee0: 814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc
[    4.325618] 5f00: 81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18
[    4.333811] 5f20: 81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298
[    4.342005] 5f40: 81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000
[    4.350199] 5f60: 815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20
[    4.358391] 5f80: ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000
[    4.366583] 5fa0: 00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000
[    4.374774] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.382966] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    4.391155] Backtrace:
[    4.393613] [<805eadcc>] (stdp2690_get_edid) from [<805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c)
[    4.402691]  r10:81c73840 r9:81c73894 r8:816d9800 r7:00001000 r6:824addc0 r5:81c73840
[    4.410534]  r4:810c35f0
[    4.413073] [<805eb10c>] (ge_b850v3_lvds_get_modes) from [<80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c)
[    4.424240]  r5:00000045 r4:810c35f0
[    4.427822] [<80593fb4>] (drm_helper_probe_single_connector_modes) from [<805d9694>] (drm_client_modeset_probe+0x200/0x1384)
[    4.439074]  r10:00000002 r9:00001000 r8:81e1ce40 r7:00001000 r6:826282c8 r5:826282c8
[    4.446917]  r4:00000008
[    4.449455] [<805d9494>] (drm_client_modeset_probe) from [<805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4)
[    4.460713]  r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:00000010
[    4.468556]  r4:81fbb700
[    4.471095] [<805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0)
[    4.482434]  r10:0000000c r9:81c40908 r8:81e1ce40 r7:810c35f4 r6:00000010 r5:816d9800
[    4.490276]  r4:81fbb700
[    4.492814] [<805a8b5c>] (drm_fbdev_client_hotplug) from [<805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4)
[    4.502494]  r7:00000000 r6:00000010 r5:81fbb700 r4:816d9800
[    4.508160] [<805a8d0c>] (drm_fbdev_generic_setup) from [<805e47b0>] (imx_drm_bind+0xf0/0x130)
[    4.516805]  r7:810c42d0 r6:8179f810 r5:00000000 r4:816d9800
[    4.522474] [<805e46c0>] (imx_drm_bind) from [<8060db1c>] (try_to_bring_up_master+0x22c/0x2f0)
[    4.531116]  r7:81126b60 r6:81c40908 r5:81e1ea80 r4:824aa240
[    4.536783] [<8060d8f0>] (try_to_bring_up_master) from [<8060dc9c>] (__component_add+0xbc/0x184)
[    4.545597]  r10:815c6810 r9:80dd9a3c r8:80c4b95c r7:810c4d6c r6:00000000 r5:81e1ea80
[    4.553440]  r4:81fe9740
[    4.555980] [<8060dbe0>] (__component_add) from [<8060dd80>] (component_add+0x1c/0x20)
[    4.563921]  r7:eefd8e00 r6:815c6810 r5:815c6800 r4:8246b440
[    4.569589] [<8060dd64>] (component_add) from [<805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8)
[    4.577702] [<805e97fc>] (dw_hdmi_imx_probe) from [<80619574>] (platform_probe+0x6c/0xc8)
[    4.585908]  r9:80dd9a3c r8:81126e90 r7:81126e90 r6:810c45b0 r5:815c6810 r4:00000000
[    4.593662] [<80619508>] (platform_probe) from [<806168dc>] (really_probe+0xe8/0x460)
[    4.601524]  r7:81126e90 r6:810c45b0 r5:00000000 r4:815c6810
[    4.607191] [<806167f4>] (really_probe) from [<80616d04>] (__driver_probe_device+0xb0/0x230)
[    4.615658]  r7:815c6810 r6:81c35e6c r5:810c45b0 r4:815c6810
[    4.621326] [<80616c54>] (__driver_probe_device) from [<80616ec8>] (driver_probe_device+0x44/0xe0)
[    4.630313]  r9:80dd9a3c r8:00000003 r7:815c6810 r6:81c35e6c r5:8116e314 r4:8116e310
[    4.638068] [<80616e84>] (driver_probe_device) from [<80617338>] (__device_attach_driver+0xb4/0x12c)
[    4.647227]  r9:80dd9a3c r8:00000001 r7:815c6810 r6:81c35e6c r5:810c45b0 r4:00000001
[    4.654981] [<80617284>] (__device_attach_driver) from [<80614730>] (bus_for_each_drv+0x94/0xd8)
[    4.663794]  r7:81c34000 r6:80617284 r5:81c35e6c r4:00000000
[    4.669461] [<8061469c>] (bus_for_each_drv) from [<8061673c>] (__device_attach+0xf8/0x190)
[    4.677753]  r7:81126e90 r6:815c6854 r5:81c34000 r4:815c6810
[    4.683419] [<80616644>] (__device_attach) from [<80617554>] (device_initial_probe+0x1c/0x20)
[    4.691971]  r8:00000000 r7:81126e90 r6:815c6810 r5:810c5320 r4:810c5080
[    4.698681] [<80617538>] (device_initial_probe) from [<80615694>] (bus_probe_device+0x94/0x9c)
[    4.707318] [<80615600>] (bus_probe_device) from [<80615c6c>] (deferred_probe_work_func+0xac/0xf0)
[    4.716305]  r7:81126e90 r6:810c5094 r5:810c5080 r4:810c5080
[    4.721973] [<80615bc0>] (deferred_probe_work_func) from [<80141488>] (process_one_work+0x1fc/0x54c)
[    4.731139]  r10:81119a60 r9:814c300d r8:00000000 r7:814c3000 r6:81412800 r5:817eeb00
[    4.738981]  r4:810c50c0 r3:80615bc0
[    4.742563] [<8014128c>] (process_one_work) from [<80141a48>] (worker_thread+0x270/0x570)
[    4.750765]  r10:81412800 r9:00000088 r8:81003d00 r7:81412818 r6:817eeb18 r5:81412800
[    4.758608]  r4:817eeb00
[    4.761147] [<801417d8>] (worker_thread) from [<80149b1c>] (kthread+0x174/0x190)
[    4.768574]  r10:81c34000 r9:815a7e7c r8:00000000 r7:817eeb00 r6:801417d8 r5:817efc00
[    4.776417]  r4:817efa40
[    4.778955] [<801499a8>] (kthread) from [<80100130>] (ret_from_fork+0x14/0x24)
[    4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8)
[    4.791266] 5fa0:                                     00000000 00000000 00000000 00000000
[    4.799459] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    4.807651] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    4.814279]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801499a8
[    4.822120]  r4:817efa40
[    4.824664] Code: e3a02080 e593001c e3a01d33 e3a05000 (e5979018)

Split the registration from the STDP4028 probe routine and only perform
registration once both the STDP4028 and STDP2690 have probed.

Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
CC: Peter Senna Tschudin <peter.senna@gmail.com>
CC: Martyn Welch <martyn.welch@collabora.co.uk>
CC: Neil Armstrong <narmstrong@baylibre.com>
CC: Robert Foss <robert.foss@linaro.org>
CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
CC: Jonas Karlman <jonas@kwiboo.se>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com

drm/bridge: anx7625: fix an error code in anx7625_register_audio()

This code accidentally returns IS_ERR(), which is 1, instead of
propagating the negative error code.  The caller doesn't check for
errors so it doesn't affect run time at all.

Fixes: 566fef1226c1 ("drm/bridge: anx7625: add HDMI audio function")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211124145219.GD13656@kili