media: mediatek: vcodec: Return NULL if no vdec_fb is found

[ Upstream commit dfa2d6e07432270330ae191f50a0e70636a4cd2b ]

"fb_use_list" is used to store used or referenced frame buffers for
vp9 stateful decoder. "NULL" should be returned when getting target
frame buffer failed from "fb_use_list", not a random unexpected one.

Fixes: f77e89854b3e ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: ensure the bitops don't cross boundaries

[ Upstream commit 5bd28eae48589694ff4e5badb03bf75dae695b3f ]

the supported_instance_count determine the instance index range,
it shouldn't exceed the bits number of instance_mask,
otherwise the bitops of instance_mask may cross boundaries

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix UNUSED_VALUE issue reported by coverity

[ Upstream commit cf6a06354989c41b536be8e094561ee16223cf1f ]

assign value '-EINVAL' to ret, but the stored value is overwritten
before it can be used

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix UNINIT issues reported by coverity

[ Upstream commit c224d0497a31ea2d173e1ea16af308945bff9037 ]

using uninitialized value may introduce risk

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix REVERSE_INULL issues reported by coverity

[ Upstream commit 79d3bafaecc13bccab1ebbd28a15e669c5a4cdaf ]

null-checking of a pointor is suggested before dereferencing it

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix CHECKED_RETURN issues reported by coverity

[ Upstream commit b237b058adbc7825da9c8f358f1ff3f0467d623a ]

calling "vpu_cmd_send/vpu_get_buffer_state/vpu_session_alloc_fs"
without checking return value

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rkvdec: increase max supported height for H.264

[ Upstream commit f000e6ca2d60fefd02a180a57df2c4162fa0c1b7 ]

After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-jpeg: Fix use after free bug due to uncanceled work

[ Upstream commit c677d7ae83141d390d1253abebafa49c962afb52 ]

In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work. Then mtk_jpeg_dec_device_run
and mtk_jpeg_enc_device_run may be called to start the
work.
If we remove the module which will call mtk_jpeg_remove
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.

Fix it by canceling the work before cleanup in the mtk_jpeg_remove

CPU0                  CPU1

                    |mtk_jpeg_job_timeout_work
mtk_jpeg_remove     |
  v4l2_m2m_release  |
    kfree(m2m_dev); |
                    |
                    | v4l2_m2m_get_curr_priv
                    |   m2m_dev->curr_ctx //use
Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: add helper function to get id name

[ Upstream commit 12cd8b8ac02525977b2e860a877add10e8ce7468 ]

convert numbers into meaningful names,
then it can improve the log readability

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: reinit vpu if reqbufs output 0

[ Upstream commit 73e3f09292a0492a3fe0f87a8170a74f12624c5e ]

according to v4l2 stateful decoder document 4.5.1.3. State Machine,
the state should change from seek to initialization
if call VIDIOC_REQBUFS(OUTPUT, 0).

so reinit the vpu decoder if reqbufs output 0

Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: extcon: maxim,max77843: restrict connector properties

[ Upstream commit fb2c3f72e819254d8c76de95917e5f9ff232586c ]

Do not allow any other properties in connector child, except what
usb-connector.yaml evaluates.

Fixes: 9729cad0278b ("dt-bindings: extcon: maxim,max77843: Add MAX77843 bindings")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Fix normally completed I/O analysed as failed

[ Upstream commit f5393a5602cacfda2014e0ff8220e5a7564e7cd1 ]

The PIO read command has no response frame and the struct iu[1024] won't be
filled. I/Os which are normally completed will be treated as failed in
sas_ata_task_done() when iu contains abnormal dirty data.

Consequently ending_fis should not be filled by iu when the response frame
hasn't been written to memory.

Fixes: d380f55503ed ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1689045300-44318-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Fix warnings detected by sparse

[ Upstream commit c0328cc595124579328462fc45d7a29a084cf357 ]

This patch fixes the following warning:

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:2168:43: sparse: sparse: restricted __le32 degrades to integer

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304161254.NztCVZIO-lkp@intel.com/
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1684118481-95908-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: f5393a5602ca ("scsi: hisi_sas: Fix normally completed I/O analysed as failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fabricate a GID on tun and loopback devices

[ Upstream commit bad5b6e34ffbaacc77ad28a0f482e33b3929e635 ]

LOOPBACK and NONE (tunnel) devices have all-zero MAC addresses.
Currently, siw_device_create() falls back to copying the IB device's
name in those cases, because an all-zero MAC address breaks the RDMA
core address resolution mechanism.

However, at the point when siw_device_create() constructs a GID, the
ib_device::name field is uninitialized, leaving the MAC address to
remain in an all-zero state.

Fabricate a random artificial GID for such devices, and ensure this
artificial GID is returned for all device query operations.

Link: https://lore.kernel.org/r/168960673260.3007.12378736853793339110.stgit@manet.1015granger.net
Reported-by: Tom Talpey <tom@talpey.com>
Fixes: a2d36b02c15d ("RDMA/siw: Enable siw on tunnel devices")
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx24120: Add retval check for cx24120_message_send()

[ Upstream commit 96002c0ac824e1773d3f706b1f92e2a9f2988047 ]

If cx24120_message_send() returns error, we should keep local struct
unchanged.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 5afc9a25be8d ("[media] Add support for TechniSat Skystar S2")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer()

[ Upstream commit ea9ef6c2e001c5dc94bee35ebd1c8a98621cf7b8 ]

'read' is freed when it is known to be NULL, but not when a read error
occurs.

Revert the logic to avoid a small leak, should a m920x_read() call fail.

Fixes: a2ab06d7c4d6 ("media: m920x: don't use stack on USB reads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dib7000p: Fix potential division by zero

[ Upstream commit a1db7b2c5533fc67e2681eb5efc921a67bc7d5b8 ]

Variable loopdiv can be assigned 0, then it is used as a denominator,
without checking it for 0.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 713d54a8bd81 ("[media] DiB7090: add support for the dib7090 based")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: (bw != NULL) -> bw]
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: usb: smsusb: fix error handling code in smsusb_init_device

[ Upstream commit b9c7141f384097fa4fa67d2f72e5731d628aef7c ]

The previous commit 4b208f8b561f ("[media] siano: register media controller
earlier")moves siano_media_device_register before smscore_register_device,
and adds corresponding error handling code if smscore_register_device
fails. However, it misses the following error handling code of
smsusb_init_device.

Fix this by moving error handling code at the end of smsusb_init_device
and adding a goto statement in the following error handling parts.

Fixes: 4b208f8b561f ("[media] siano: register media controller earlier")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu: rockchip: Fix directory table address encoding

[ Upstream commit 6df63b7ebdaf5fcd75dceedf6967d0761e56eca1 ]

The physical address to the directory table is currently encoded using
the following bit layout for IOMMU v2.

 31:12 - Address bit 31:0
 11: 4 - Address bit 39:32

This is also the bit layout used by the vendor kernel.

However, testing has shown that addresses to the directory/page tables
and memory pages are all encoded using the same bit layout.

IOMMU v1:
 31:12 - Address bit 31:0

IOMMU v2:
 31:12 - Address bit 31:0
 11: 8 - Address bit 35:32
  7: 4 - Address bit 39:36

Change to use the mk_dtentries ops to encode the directory table address
correctly. The value written to DTE_ADDR may include the valid bit set,
a bit that is ignored and DTE_ADDR reg read it back as 0.

This also update the bit layout comment for the page address and the
number of nybbles that are read back for DTE_ADDR comment.

These changes render the dte_addr_phys and dma_addr_dte ops unused and
is removed.

Fixes: 227014b33f62 ("iommu: rockchip: Add internal ops to handle variants")
Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Fixes: c987b65a574f ("iommu/rockchip: Fix physical address decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230617182540.3091374-2-jonas@kwiboo.se
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd/iommu_v2: Fix pasid_state refcount dec hit 0 warning on pasid unbind

[ Upstream commit 534103bcd52ca9c1fecbc70e717b4a538dc4ded8 ]

When unbinding pasid - a race condition exists vs outstanding page faults.

To prevent this, the pasid_state object contains a refcount.
    * set to 1 on pasid bind
    * incremented on each ppr notification start
    * decremented on each ppr notification done
    * decremented on pasid unbind

Since refcount_dec assumes that refcount will never reach 0:
  the current implementation causes the following to be invoked on
  pasid unbind:
        REFCOUNT_WARN("decrement hit 0; leaking memory")

Fix this issue by changing refcount_dec to refcount_dec_and_test
to explicitly handle refcount=1.

Fixes: 8bc54824da4e ("iommu/amd: Convert from atomic_t to refcount_t on pasid_state->count")
Signed-off-by: Daniel Marcovitch <dmarcovitch@nvidia.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230609105146.7773-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link()

[ Upstream commit d7b13edd4cb4bfa335b6008ab867ac28582d3e5c ]

If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL,
so fwnode_handle_put() is a no-op.

Release the reference taken from a previous fwnode_graph_get_port_parent()
call instead.

Also handle fwnode_graph_get_port_parent() failures.

In order to fix these issues, add an error handling path to the function
and the needed gotos.

Fixes: ca50c197bd96 ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: tvp5150: check return value of devm_kasprintf()

[ Upstream commit 26ce7054d804be73935b9268d6e0ecf2fbbc8aef ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ad5820: Drop unsupported ad5823 from i2c_ and of_device_id tables

[ Upstream commit f126ff7e4024f6704e6ec0d4137037568708a3c7 ]

The supported ad5820 and ad5821 VCMs both use a single 16 bit register
which is written by sending 2 bytes with the data directly after sending
the i2c-client address.

The ad5823 OTOH has a more typical i2c / smbus device setup with multiple
8 bit registers where the first byte send after the i2c-client address is
the register address and the actual data only starts from the second byte
after the i2c-client address.

The ad5823 i2c_ and of_device_id-s was added at the same time as
the ad5821 ids with as rationale:

"""
Some camera modules also refer that AD5823 is a replacement of AD5820:
https://download.kamami.com/p564094-OV8865_DS.pdf
"""

The AD5823 may be an electrical and functional replacement of the AD5820,
but from a software pov it is not compatible at all and it is going to
need its own driver, drop its id from the ad5820 driver.

Fixes: b8bf73136bae ("media: ad5820: Add support for ad5821 and ad5823")
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: fix low resolution image abnormal issue

[ Upstream commit a828002f38c5ee49d3f0c0e64c0f0caa1aec8dc2 ]

OV5640 will output abnormal image data when work at low resolution
(320x240, 176x144 and 160x120) after switching from high resolution,
such as 1080P, the time interval between high and low switching must
be less than 1000ms in order to OV5640 don't enter suspend state during
the time.

The reason is by 0x3824 value don't restore to initialize value when
do resolution switching. In high resolution setting array, 0x3824 is
set to 0x04, but low resolution setting array remove 0x3824 in commit
db15c1957a2d ("media: ov5640: Remove duplicated mode settings"). So
when do resolution switching from high to low, such as 1080P to 320x240,
and the time interval is less than auto suspend delay time which means
global initialize setting array will not be loaded, the output image
data are abnormal. Hence move 0x3824 from ov5640_init_setting[] table
to ov5640_setting_low_res[] table and also move 0x4407 0x460b, 0x460c
to avoid same issue.

Fixes: db15c1957a2d ("media: ov5640: Remove duplicated mode settings")
Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/qedr: Remove a duplicate assignment in irdma_query_ah()

[ Upstream commit 65e02e840847158c7ee48ca8e6e91062b0f78662 ]

Delete a duplicate statement from this function implementation.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230706022704.1260-1-duminjie@vivo.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup/cpuset: Inherit parent's load balance state in v2

[ Upstream commit c8c926200c55454101f072a4b16c9ff5b8c9e56f ]

Since commit f28e22441f35 ("cgroup/cpuset: Add a new isolated
cpus.partition type"), the CS_SCHED_LOAD_BALANCE bit of a v2 cpuset
can be on or off. The child cpusets of a partition root must have the
same setting as its parent or it may screw up the rebuilding of sched
domains. Fix this problem by making sure the a child v2 cpuset will
follows its parent cpuset load balance state unless the child cpuset
is a new partition root itself.

Fixes: f28e22441f35 ("cgroup/cpuset: Add a new isolated cpus.partition type")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pNFS: Fix assignment of xprtdata.cred

[ Upstream commit c4a123d2e8c4dc91d581ee7d05c0cd51a0273fab ]

The comma at the end of the line was leftover from an earlier refactor
of the _nfs4_pnfs_v3_ds_connect() function. This is technically valid C,
so the compilers didn't catch it, but if I'm understanding how it works
correctly it assigns the return value of rpc_clnt_add_xprtr() to
xprtdata.cred.

Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: a12f996d3413 ("NFSv4/pNFS: Use connections to a DS that are all of the same protocol family")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ

[ Upstream commit 5690eed941ab7e33c3c3d6b850100cabf740f075 ]

If the client sent a synchronous copy and the server replied with
ERR_OFFLOAD_NO_REQ indicating that it wants an asynchronous
copy instead, the client should retry with asynchronous copy.

Fixes: 539f57b3e0fd ("NFS handle COPY ERR_OFFLOAD_NO_REQS")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN

[ Upstream commit f67b55b6588bcf9316a1e6e8d529100a5aa3ebe6 ]

Commit 64cfca85bacd asserts the only valid return values for
nfs2/3_decode_dirent should not include -ENAMETOOLONG, but for a server
that sends a filename3 which exceeds MAXNAMELEN in a READDIR response the
client's behavior will be to endlessly retry the operation.

We could map -ENAMETOOLONG into -EBADCOOKIE, but that would produce
truncated listings without any error.  The client should return an error
for this case to clearly assert that the server implementation must be
corrected.

Fixes: 64cfca85bacd ("NFS: Return valid errors from nfs2/3_decode_dirent()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: da_addr_body field missing in some GETDEVICEINFO replies

[ Upstream commit 6372e2ee629894433fe6107d7048536a3280a284 ]

The XDR specification in RFC 8881 looks like this:

struct device_addr4 {
layouttype4 da_layout_type;
opaque da_addr_body<>;
};

struct GETDEVICEINFO4resok {
device_addr4 gdir_device_addr;
bitmap4 gdir_notification;
};

union GETDEVICEINFO4res switch (nfsstat4 gdir_status) {
case NFS4_OK:
GETDEVICEINFO4resok gdir_resok4;
case NFS4ERR_TOOSMALL:
count4 gdir_mincount;
default:
void;
};

Looking at nfsd4_encode_getdeviceinfo() ....

When the client provides a zero gd_maxcount, then the Linux NFS
server implementation encodes the da_layout_type field and then
skips the da_addr_body field completely, proceeding directly to
encode gdir_notification field.

There does not appear to be an option in the specification to skip
encoding da_addr_body. Moreover, Section 18.40.3 says:

> If the client wants to just update or turn off notifications, it
> MAY send a GETDEVICEINFO operation with gdia_maxcount set to zero.
> In that event, if the device ID is valid, the reply's da_addr_body
> field of the gdir_device_addr field will be of zero length.

Since the layout drivers are responsible for encoding the
da_addr_body field, put this fix inside the ->encode_getdeviceinfo
methods.

Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tom Haynes <loghyr@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: lockd: avoid possible wrong NULL parameter

[ Upstream commit de8d38cf44bac43e83bad28357ba84784c412752 ]

clang's static analysis warning: fs/lockd/mon.c: line 293, column 2:
Null pointer passed as 2nd argument to memory copy function.

Assuming 'hostname' is NULL and calling 'nsm_create_handle()', this will
pass NULL as 2nd argument to memory copy function 'memcpy()'. So return
NULL if 'hostname' is invalid.

Fixes: 77a3ef33e2de ("NSM: More clean up of nsm_get_handle()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: validate max amount of blocks before allocation.

[ Upstream commit 0225e10972fa809728b8d4c1bd2772b3ec3fdb57 ]

The lack of checking bmp->db_max_freebud in extBalloc() can lead to
shift out of bounds, so this patch prevents undefined behavior, because
bmp->db_max_freebud == -1 only if there is no free space.

Signed-off-by: Aleksei Filippov <halip0503@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+5f088f29593e6b4c8db8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=01abadbd6ae6a08b1f1987aa61554c6b3ac19ff2
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix unttached inode after power cut with orphan file feature enabled

[ Upstream commit 1524773425ae8113b0b782886366e68656b34e53 ]

Running generic/475(filesystem consistent tests after power cut) could
easily trigger unattached inode error while doing fsck:
  Unattached zero-length inode 39405.  Clear? no

  Unattached inode 39405
  Connect to /lost+found? no

Above inconsistence is caused by following process:
       P1                       P2
ext4_create
 inode = ext4_new_inode_start_handle  // itable records nlink=1
 ext4_add_nondir
   err = ext4_add_entry  // ENOSPC
    ext4_append
     ext4_bread
      ext4_getblk
       ext4_map_blocks // returns ENOSPC
   drop_nlink(inode) // won't be updated into disk inode
   ext4_orphan_add(handle, inode)
    ext4_orphan_file_add
 ext4_journal_stop(handle)
      jbd2_journal_commit_transaction // commit success
              >> power cut <<
ext4_fill_super
 ext4_load_and_init_journal   // itable records nlink=1
 ext4_orphan_cleanup
  ext4_process_orphan
   if (inode->i_nlink)        // true, inode won't be deleted

Then, allocated inode will be reserved on disk and corresponds to no
dentries, so e2fsck reports 'unattached inode' problem.

The problem won't happen if orphan file feature is disabled, because
ext4_orphan_add() will update disk inode in orphan list mode. There
are several places not updating disk inode while putting inode into
orphan area, such as ext4_add_nondir(), ext4_symlink() and whiteout
in ext4_rename(). Fix it by updating inode into disk in all error
branches of these places.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217605
Fixes: 02f310fcf47f ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230628132011.650383-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/iommu: Fix notifiers being shared by PCI and VIO buses

[ Upstream commit c37b6908f7b2bd24dcaaf14a180e28c9132b9c58 ]

fail_iommu_setup() registers the fail_iommu_bus_notifier struct to both
PCI and VIO buses.  struct notifier_block is a linked list node, so this
causes any notifiers later registered to either bus type to also be
registered to the other since they share the same node.

This causes issues in (at least) the vgaarb code, which registers a
notifier for PCI buses.  pci_notify() ends up being called on a vio
device, converted with to_pci_dev() even though it's not a PCI device,
and finally makes a bad access in vga_arbiter_add_pci_device() as
discovered with KASAN:

 BUG: KASAN: slab-out-of-bounds in vga_arbiter_add_pci_device+0x60/0xe00
 Read of size 4 at addr c000000264c26fdc by task swapper/0/1

 Call Trace:
   dump_stack_lvl+0x1bc/0x2b8 (unreliable)
   print_report+0x3f4/0xc60
   kasan_report+0x244/0x698
   __asan_load4+0xe8/0x250
   vga_arbiter_add_pci_device+0x60/0xe00
   pci_notify+0x88/0x444
   notifier_call_chain+0x104/0x320
   blocking_notifier_call_chain+0xa0/0x140
   device_add+0xac8/0x1d30
   device_register+0x58/0x80
   vio_register_device_node+0x9ac/0xce0
   vio_bus_scan_register_devices+0xc4/0x13c
   __machine_initcall_pseries_vio_device_init+0x94/0xf0
   do_one_initcall+0x12c/0xaa8
   kernel_init_freeable+0xa48/0xba8
   kernel_init+0x64/0x400
   ret_from_kernel_thread+0x5c/0x64

Fix this by creating separate notifier_block structs for each bus type.

Fixes: d6b9a81b2a45 ("powerpc: IOMMU fault injection")
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
[mpe: Add #ifdef to fix CONFIG_IBMVIO=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322035322.328709-1-ruscur@russell.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mpc5xxx: Add missing fwnode_handle_put()

[ Upstream commit b9bbbf4979073d5536b7650decd37fcb901e6556 ]

In mpc5xxx_fwnode_get_bus_frequency(), we should add
fwnode_handle_put() when break out of the iteration
fwnode_for_each_parent_node() as it will automatically
increase and decrease the refcounter.

Fixes: de06fba62af6 ("powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230322030423.1855440-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n

[ Upstream commit 750bd41aeaeb1f0e0128aa4f8fcd6dd759713641 ]

With JUMP_LABEL=n, hcall_tracepoint_refcount's address is being tested
instead of its value. This results in the tracing slowpath always being
taken unnecessarily.

Fixes: 9a10ccb29c0a2 ("powerpc/pseries: move hcall_tracepoint_refcount out of .toc")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230509091600.70994-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs/blocklayout: Use the passed in gfp flags

[ Upstream commit 08b45fcb2d4675f6182fe0edc0d8b1fe604051fa ]

This allocation should use the passed in GFP_ flags instead of
GFP_KERNEL.  One places where this matters is in filelayout_pg_init_write()
which uses GFP_NOFS as the allocation flags.

Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT

[ Upstream commit eac030b22ea12cdfcbb2e941c21c03964403c63f ]

lppaca_shared_proc() takes a pointer to the lppaca which is typically
accessed through get_lppaca().  With DEBUG_PREEMPT enabled, this leads
to checking if preemption is enabled, for example:

  BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693
  caller is lparcfg_data+0x408/0x19a0
  CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2
  Call Trace:
    dump_stack_lvl+0x154/0x200 (unreliable)
    check_preemption_disabled+0x214/0x220
    lparcfg_data+0x408/0x19a0
    ...

This isn't actually a problem however, as it does not matter which
lppaca is accessed, the shared proc state will be the same.
vcpudispatch_stats_procfs_init() already works around this by disabling
preemption, but the lparcfg code does not, erroring any time
/proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.

Instead of disabling preemption on the caller side, rework
lppaca_shared_proc() to not take a pointer and instead directly access
the lppaca, bypassing any potential preemption checks.

Fixes: f13c13a00512 ("powerpc: Stop using non-architected shared_proc field in lppaca")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rework to avoid needing a definition in paca.h and lppaca.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-4-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Don't include lppaca.h in paca.h

[ Upstream commit 1aa000667669fa855853decbb1c69e974d8ff716 ]

By adding a forward declaration for struct lppaca we can untangle paca.h
and lppaca.h. Also move get_lppaca() into lppaca.h for consistency.

Add includes of lppaca.h to some files that need it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230823055317.751786-3-mpe@ellerman.id.au
Stable-dep-of: eac030b22ea1 ("powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT")
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Fix READ_PLUS size calculations

[ Upstream commit 8d18f6c5bb864d97a730f471c56cdecf313efe64 ]

I bump the decode_read_plus_maxsz to account for hole segments, but I
need to subtract out this increase when calling
rpc_prepare_reply_pages() so the common case of single data segment
replies can be directly placed into the xdr pages without needing to be
shifted around.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: d3b00a802c845 ("NFS: Replace the READ_PLUS decoding code")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Fix up READ_PLUS alignment

[ Upstream commit f8527028a7e52da884055c401abc04e0b0c84285 ]

Assume that the first segment will be a DATA segment, and place the data
directly into the xdr pages so it doesn't need to be shifted.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 8d18f6c5bb86 ("NFSv4.2: Fix READ_PLUS size calculations")
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Fix READ_PLUS smatch warnings

[ Upstream commit bb05a617f06b7a882e19c4f475b8e37f14d9ceac ]

Smatch reports:
  fs/nfs/nfs42xdr.c:1131 decode_read_plus() warn: missing error code? 'status'

Which Dan suggests to fix by doing a hardcoded "return 0" from the
"if (segments == 0)" check.

Additionally, smatch reports that the "status = -EIO" assignment is not
used. This patch addresses both these issues.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305222209.6l5VM2lL-lkp@intel.com/
Fixes: d3b00a802c845 ("NFS: Replace the READ_PLUS decoding code")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.2: Rework scratch handling for READ_PLUS

[ Upstream commit fbd2a05f29a95d5b42b294bf47e55a711424965b ]

Instead of using a tiny, static scratch buffer, we should use a kmalloc()-ed
buffer that is allocated when checking for read plus usage. This lets us
use the buffer before decoding any part of the READ_PLUS operation
instead of setting it right before segment decoding, meaning it should
be a little more robust.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable-dep-of: bb05a617f06b ("NFSv4.2: Fix READ_PLUS smatch warnings")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath10k: Use RMW accessors for changing LNKCTL

[ Upstream commit f139492a09f15254fa261245cdbd65555cdf39e3 ]

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.

Use RMW capability accessors which does proper locking to avoid losing
concurrent updates to the register value. On restore, clear the ASPMC field
properly.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 76d870ed09ab ("ath10k: enable ASPM")
Link: https://lore.kernel.org/r/20230717120503.15276-11-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath11k: Use RMW accessors for changing LNKCTL

[ Upstream commit 6c1b6bdb34aaf8f94f65a9cae1d63490320c11bc ]

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value. On restore, clear the ASPMC field
properly.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: e9603f4bdcc0 ("ath11k: pci: disable ASPM L0sLs before downloading firmware")
Link: https://lore.kernel.org/r/20230717120503.15276-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Use RMW accessors for changing LNKCTL

[ Upstream commit 30de872537bda526664d7a20b646adfb3e7ce6e6 ]

Don't assume that only the driver would be accessing LNKCTL of the upstream
bridge. ASPM policy changes can trigger write to LNKCTL outside of driver's
control.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event")
Link: https://lore.kernel.org/r/20230717120503.15276-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: Use RMW accessors for changing LNKCTL

[ Upstream commit 7189576e8a829130192b33c5b64e8a475369c776 ]

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.  And in
the case of upstream bridge, the driver does not even own the device it's
changing the registers for.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 8a7cd27679d0 ("drm/radeon/cik: add support for pcie gen1/2/3 switching")
Fixes: b9d305dfb66c ("drm/radeon: implement pcie gen2/3 support for SI")
Link: https://lore.kernel.org/r/20230717120503.15276-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Use RMW accessors for changing LNKCTL

[ Upstream commit ce7d88110b9ed5f33fe79ea6d4ed049fb0e57bce ]

Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.  And in
the case of upstream bridge, the driver does not even own the device it's
changing the registers for.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts")
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Link: https://lore.kernel.org/r/20230717120503.15276-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Convert fsl_emb notifier to state machine callbacks

[ Upstream commit 34daf445f82bd3a4df852bb5f1dffd792ac830a0 ]

  CC      arch/powerpc/perf/core-fsl-emb.o
arch/powerpc/perf/core-fsl-emb.c:675:6: error: no previous prototype for 'hw_perf_event_setup' [-Werror=missing-prototypes]
  675 | void hw_perf_event_setup(int cpu)
      |      ^~~~~~~~~~~~~~~~~~~

Looks like fsl_emb was completely missed by commit 3f6da3905398 ("perf:
Rework and fix the arch CPU-hotplug hooks")

So, apply same changes as commit 3f6da3905398 ("perf: Rework and fix
the arch CPU-hotplug hooks") then commit 57ecde42cc74 ("powerpc/perf:
Convert book3s notifier to state machine callbacks")

While at it, also fix following error:

arch/powerpc/perf/core-fsl-emb.c: In function 'perf_event_interrupt':
arch/powerpc/perf/core-fsl-emb.c:648:13: error: variable 'found' set but not used [-Werror=unused-but-set-variable]
  648 |         int found = 0;
      |             ^~~~~

Fixes: 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/603e1facb32608f88f40b7d7b9094adc50e7b2dc.1692349125.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fadump: reset dump area size if fadump memory reserve fails

[ Upstream commit d1eb75e0dfed80d2d85b664e28a39f65b290ab55 ]

In case fadump_reserve_mem() fails to reserve memory, the
reserve_dump_area_size variable will retain the reserve area size. This
will lead to /sys/kernel/fadump/mem_reserved node displaying an incorrect
memory reserved by fadump.

To fix this problem, reserve dump area size variable is set to 0 if fadump
failed to reserve memory.

Fixes: 8255da95e545 ("powerpc/fadump: release all the memory above boot memory size")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230704050715.203581-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvdimm: Fix dereference after free in register_nvdimm_pmu()

[ Upstream commit 08ca6906a4b7e48f8e93b7c1f49a742a415be6d5 ]

'nd_pmu->pmu.attr_groups' is dereferenced in function
'nvdimm_pmu_free_hotplug_memory' call after it has been freed. Because in
function 'nvdimm_pmu_free_hotplug_memory' memory pointed by the fields of
'nd_pmu->pmu.attr_groups' is deallocated it is necessary to call 'kfree'
after 'nvdimm_pmu_free_hotplug_memory'.

Fixes: 0fab1ba6ad6b ("drivers/nvdimm: Add perf interface to expose nvdimm performance stats")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230817114103.754977-1-konstantin.meskhidze@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()

[ Upstream commit 85ae42c72142346645e63c33835da947dfa008b3 ]

Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function
'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function
'unregister_nvdimm_pmu'.

Fixes: 0fab1ba6ad6b ("drivers/nvdimm: Add perf interface to expose nvdimm performance stats")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230817115945.771826-1-konstantin.meskhidze@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/type1: fix cap_migration information leak

[ Upstream commit cd24e2a60af633f157d7e59c0a6dba64f131c0b1 ]

Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.

The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:

  struct vfio_iommu_type1_info_cap_migration {
          struct vfio_info_cap_header header;              /*     0     8 */
          __u32                      flags;                /*     8     4 */

          /* XXX 4 bytes hole, try to pack */

          __u64                      pgsize_bitmap;        /*    16     8 */
          __u64                      max_dirty_bitmap_size; /*    24     8 */

          /* size: 32, cachelines: 1, members: 4 */
          /* sum members: 28, holes: 1, sum holes: 4 */
          /* last cacheline: 32 bytes */
  };

The cap_mig variable is filled in without initializing the hole:

  static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
                         struct vfio_info_cap *caps)
  {
      struct vfio_iommu_type1_info_cap_migration cap_mig;

      cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
      cap_mig.header.version = 1;

      cap_mig.flags = 0;
      /* support minimum pgsize */
      cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
      cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;

      return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
  }

The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:

  int vfio_info_add_capability(struct vfio_info_cap *caps,
                   struct vfio_info_cap_header *cap, size_t size)
  {
      struct vfio_info_cap_header *header;

      header = vfio_info_cap_add(caps, size, cap->id, cap->version);
      if (IS_ERR(header))
          return PTR_ERR(header);

      memcpy(header + 1, cap + 1, size - sizeof(*header));

      return 0;
  }

This issue was found by code inspection.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Fixes: ad721705d09c ("vfio iommu: Add migration capability to report supported features")
Link: https://lore.kernel.org/r/20230801155352.1391945-1-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/radix: Move some functions into #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE

[ Upstream commit 4a9dd8f292efd614f0a18452e6474fe19ae17b47 ]

With skiboot_defconfig, Clang reports:

  CC      arch/powerpc/mm/book3s64/radix_tlb.o
arch/powerpc/mm/book3s64/radix_tlb.c:419:20: error: unused function '_tlbie_pid_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
                   ^
arch/powerpc/mm/book3s64/radix_tlb.c:663:20: error: unused function '_tlbie_va_range_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_va_range_lpid(unsigned long start, unsigned long end,
                   ^

This is because those functions are only called from functions
enclosed in a #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE

Move below functions inside that #ifdef
* __tlbie_pid_lpid(unsigned long pid,
* __tlbie_va_lpid(unsigned long va, unsigned long pid,
* fixup_tlbie_pid_lpid(unsigned long pid, unsigned long lpid)
* _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
* fixup_tlbie_va_range_lpid(unsigned long va,
* __tlbie_va_range_lpid(unsigned long start, unsigned long end,
* _tlbie_va_range_lpid(unsigned long start, unsigned long end,

Fixes: f0c6fbbb9050 ("KVM: PPC: Book3S HV: Add support for H_RPT_INVALIDATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307260802.Mjr99P5O-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3d72efd39f986ee939d068af69fdce28bd600766.1691568093.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op

[ Upstream commit 4dd432d985ef258e3bc436e568fba4b987b59171 ]

Reconfiguring the clock divider to the exact same value is observed
on an i.MX8MN to often cause a longer than usual clock pause, probably
because the divider restarts counting whenever the register is rewritten.

This issue doesn't show up normally, because the clock framework will
take care to not call set_rate when the clock rate is the same.
However, when we reconfigure an upstream clock, the common code will
call set_rate with the newly calculated rate on all children, e.g.:

  - sai5 is running normally and divides Audio PLL out by 16.
  - Audio PLL rate is increased by 32Hz (glitch-free kdiv change)
  - rates for children are recalculated and rates are set recursively
  - imx8m_clk_composite_divider_set_rate(sai5) is called with
    32/16 = 2Hz more
  - imx8m_clk_composite_divider_set_rate computes same divider as before
  - divider register is written, so it restarts counting from zero and
    MCLK is briefly paused, so instead of e.g. 40ns, MCLK is low for 120ns.

Some external clock consumers can be upset by such unexpected clock pauses,
so let's make sure we only rewrite the divider value when the value to be
written is actually different.

Fixes: d3ff9728134e ("clk: imx: Add imx composite clock")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230807082201.2332746-1-a.fatoum@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx8mp: fix sai4 clock

[ Upstream commit c30f600f1f41dcf5ef0fb02e9a201f9b2e8f31bd ]

The reference manual don't mention a SAI4 hardware block. This would be
clock slice 78 which is skipped (TRM, page 237). Remove any reference to
this clock to align the driver with the reality.

Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver")
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20230731142150.3186650-1-m.felsch@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx8ulp: update SPLL2 type

[ Upstream commit 7653a59be8af043adc4c09473975a860e6055ff9 ]

The SPLL2 on iMX8ULP is different with other frac PLLs, it can
support VCO from 650Mhz to 1Ghz. Following the changes to pllv4,
use the new type IMX_PLLV4_IMX8ULP_1GHZ.

Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230625123340.4067536-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: pllv4: Fix SPLL2 MULT range

[ Upstream commit 3f0cdb945471f1abd1cf4d172190e9c489c5052a ]

The SPLL2 on iMX8ULP is different with other frac PLLs, it can
support VCO from 650Mhz to 1Ghz. According to RM, the MULT is
using a range from 27 to 54, not some fixed values. If using
current PLL implementation, some clock rate can't be supported.

Fix the issue by adding new type for the SPLL2 and use MULT range
to replace MULT table

Fixes: 5f0601c47c33 ("clk: imx: Update the pllv4 to support imx8ulp")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230625123340.4067536-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs

[ Upstream commit a27ac3806b0a0e6954fb5967223b8635242e5b8f ]

Use the floor ops to prevent warnings like this at suspend exit and boot:

mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz

Fixes: db0c944ee92b ("clk: qcom: Add clock driver for SM8450")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_clk-v1-1-88031478d548@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/ASPM: Use RMW accessors for changing LNKCTL

[ Upstream commit e09060b3b6b4661278ff8e1b7b81a37d5ea86eae ]

Don't assume that the device is fully under the control of ASPM and use RMW
capability accessors which do proper locking to avoid losing concurrent
updates to the register values.

If configuration fails in pcie_aspm_configure_common_clock(), the
function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store
only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather
than the content of the whole LNKCTL registers. It aligns better with
how pcie_lnkctl_clear_and_set() expects its parameter and makes the
code more obvious to understand.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 2a42d9dba784 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch")
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: pciehp: Use RMW accessors for changing LNKCTL

[ Upstream commit 5f75f96c61039151c193775d776fde42477eace1 ]

As hotplug is not the only driver touching LNKCTL, use the RMW capability
accessor which handles concurrent changes correctly.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7f822999e12a ("PCI: pciehp: Add Disable/enable link functions")
Link: https://lore.kernel.org/r/20230717120503.15276-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Add locking to RMW PCI Express Capability Register accessors

[ Upstream commit 5e70d0acf0825f439079736080350371f8d6699a ]

Many places in the kernel write the Link Control and Root Control PCI
Express Capability Registers without proper concurrency control and this
could result in losing the changes one of the writers intended to make.

Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect
bit changes made in the RMW capability accessors. Protect only a selected
set of registers by differentiating the RMW accessor internally to
locked/unlocked variants using a wrapper which has the same signature as
pcie_capability_clear_and_set_word(). As the Capability Register (pos)
given to the wrapper is always a constant, the compiler should be able to
simplify all the dead-code away.

So far only the Link Control Register (ASPM, hotplug, link retraining,
various drivers) and the Root Control Register (AER & PME) seem to
require RMW locking.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver")
Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors")
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM")
Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC")
Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL")
Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261")
Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG")
Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function")
Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination")
Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space")
Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving")
Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260")
Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors")
Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ")
Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver")
Fixes: e6de30d63eb1 ("r8169: more 8168dp support.")
Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards")
Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata")
Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants")
Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue")
Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time")
Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default")
Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Allow drivers to request exclusive config regions

[ Upstream commit 278294798ac9118412c9624a801d3f20f2279363 ]

PCI config space access from user space has traditionally been
unrestricted with writes being an understood risk for device operation.

Unfortunately, device breakage or odd behavior from config writes lacks
indicators that can leave driver writers confused when evaluating
failures.  This is especially true with the new PCIe Data Object
Exchange (DOE) mailbox protocol where backdoor shenanigans from user
space through things such as vendor defined protocols may affect device
operation without complete breakage.

A prior proposal restricted read and writes completely.[1]  Greg and
Bjorn pointed out that proposal is flawed for a couple of reasons.
First, lspci should always be allowed and should not interfere with any
device operation.  Second, setpci is a valuable tool that is sometimes
necessary and it should not be completely restricted.[2]  Finally
methods exist for full lock of device access if required.

Even though access should not be restricted it would be nice for driver
writers to be able to flag critical parts of the config space such that
interference from user space can be detected.

Introduce pci_request_config_region_exclusive() to mark exclusive config
regions.  Such regions trigger a warning and kernel taint if accessed
via user space.

Create pci_warn_once() to restrict the user from spamming the log.

[1] https://lore.kernel.org/all/161663543465.1867664.5674061943008380442.stgit@dwillia2-desk3.amr.corp.intel.com/
[2] https://lore.kernel.org/all/YF8NGeGv9vYcMfTV@kroah.com/

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220926215711.2893286-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5e70d0acf082 ("PCI: Add locking to RMW PCI Express Capability Register accessors")
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mcp23s08: check return value of devm_kasprintf()

[ Upstream commit f941714a7c7698eadb59bc27d34d6d6f38982705 ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 0f04a81784fe ("pinctrl: mcp23s08: Split to three parts: core, I²C, SPI")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621100409.1608395-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Mark NVIDIA T4 GPUs to avoid bus reset

[ Upstream commit d5af729dc2071273f14cbb94abbc60608142fd83 ]

NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card
is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs
PCI_DEV_FLAGS_NO_BUS_RESET.

Fixes: 4c207e7121fa ("PCI: Mark some NVIDIA GPUs to avoid bus reset")
Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: microchip: Correct the DED and SEC interrupt bit offsets

[ Upstream commit 6d473a5a26136edf55c435a1c433e52910e03926 ]

The SEC and DED interrupt bits are laid out the wrong way round so the SEC
interrupt handler attempts to mask, unmask, and clear the DED interrupt
and vice versa. Correct the bit offsets so that each interrupt handler
operates properly.

Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm6350: Fix gcc_sdcc2_apps_clk_src

[ Upstream commit df04d166d1f346dbf740bbea64a3bed3e7f14c8d ]

GPLL7 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230804-sm6350-sdcc2-v1-1-3d946927d37d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: reset: Use the correct type of sleep/delay based on length

[ Upstream commit 181b66ee7cdd824797fc99b53bec29cf5630a04f ]

Use the fsleep() helper that (based on the length of the delay, see: [1])
chooses the correct sleep/delay functions.

[1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt

Fixes: 2cb8a39b6781 ("clk: qcom: reset: Allow specifying custom reset delay")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-qcom_reset-v3-1-5958facd5db2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()

[ Upstream commit 9e0f4f2918c2ff145d3dedee862d9919a6ed5812 ]

kvm_vfio_group_add() creates kvg instance, links it to kv->group_list,
and calls kvm_vfio_file_set_kvm() with kvg->file as an argument after
dropping kv->lock. If we race group addition and deletion calls, kvg
instance may get freed by the time we get around to calling
kvm_vfio_file_set_kvm().

Previous iterations of the code did not reference kvg->file outside of
the critical section, but used a temporary variable. Still, they had
similar problem of the file reference being owned by kvg structure and
potential for kvm_vfio_group_del() dropping it before
kvm_vfio_group_add() had a chance to complete.

Fix this by moving call to kvm_vfio_file_set_kvm() under the protection
of kv->lock. We already call it while holding the same lock when vfio
group is being deleted, so it should be safe here as well.

Fixes: 2fc1bec15883 ("kvm: set/clear kvm to/from vfio_group when group add/delete")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230714224538.404793-1-dmitry.torokhov@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm/vfio: Prepare for accepting vfio device fd

[ Upstream commit 2f99073a722beef5f74f3b0f32bda227ba3df1e0 ]

This renames kvm_vfio_group related helpers to prepare for accepting
vfio device fd. No functional change is intended.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-5-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Stable-dep-of: 9e0f4f2918c2 ("kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sm8250: Fix gcc_sdcc2_apps_clk_src

[ Upstream commit 783cb693828ce487cf0bc6ad16cbcf2caae6f8d9 ]

GPLL9 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Patrick Whewell <patrick.whewell@sightlineapplications.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230802210359.408-1-patrick.whewell@sightlineapplications.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: avoid potential data overflow in next_linear_group

[ Upstream commit 60c672b7f2d1e5dd1774f2399b355c9314e709f8 ]

ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.

Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: correct grp validation in ext4_mb_good_group

[ Upstream commit a9ce5993a0f5c0887c8a1b4ffa3b8046fbcfdc93 ]

Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.

Fixes: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/igen6: Fix the issue of no error events

[ Upstream commit ce53ad81ed36c24aff075f94474adecfabfcf239 ]

Current igen6_edac checks for pending errors before the registration
of the error handler. However, there is a possibility that the error
occurs during the registration process, leading to unhandled pending
errors and no future error events. This issue can be reproduced by
repeatedly injecting errors during the loading of the igen6_edac.

Fix this issue by moving the pending error handler after the registration
of the error handler, ensuring that no pending errors are left unhandled.

Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Reported-by: Ee Wey Lim <ee.wey.lim@intel.com>
Tested-by: Ee Wey Lim <ee.wey.lim@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230725080427.23883-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src

[ Upstream commit fd0b5ba87ad5709f0fd3d2bc4b7870494a75f96a ]

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230723190725.1619193-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: Modify mismatched function name

[ Upstream commit 075d9ca5b4e17f84fd1c744a405e69ec743be7f0 ]

No functional modification involved.

drivers/clk/sunxi-ng/ccu_mmc_timing.c:54: warning: expecting prototype for sunxi_ccu_set_mmc_timing_mode(). Prototype was for sunxi_ccu_get_mmc_timing_mode() instead

Fixes: f6f64ed868d3 ("clk: sunxi-ng: Add interface to query or configure MMC timing modes.")
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230722153107.2078179-1-chris.zjh@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI/DOE: Fix destroy_work_on_stack() race

[ Upstream commit e3a3a097eaebaf234a482b4d2f9f18fe989208c1 ]

The following debug object splat was observed in testing:

  ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510
  WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0
  ...
  Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work
  RIP: 0010:debug_print_object+0x7d/0xb0
  ...
  Call Trace:
   ? debug_print_object+0x7d/0xb0
   ? __pfx_doe_statemachine_work+0x10/0x10
   debug_object_free.part.0+0x11b/0x150
   doe_statemachine_work+0x45e/0x510
   process_one_work+0x1d4/0x3c0

This occurs because destroy_work_on_stack() was called after signaling
the completion in the calling thread.  This creates a race between
destroy_work_on_stack() and the task->work struct going out of scope in
pci_doe().

Signal the work complete after destroying the work struct.  This is safe
because signal_task_complete() is the final thing the work item does and
the workqueue code is careful not to access the work struct after.

Fixes: abf04be0e707 ("PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y")
Link: https://lore.kernel.org/r/20230726-doe-fix-v1-1-af07e614d4dd@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()

[ Upstream commit a995c50db887ef97f3160775aef7d772635a6f6e ]

The function clk_register_pll() may return NULL or an ERR_PTR. Don't
treat an ERR_PTR as valid.

Signed-off-by: Minjie Du <duminjie@vivo.com>
Link: https://lore.kernel.org/r/20230712102246.10348-1-duminjie@vivo.com
Fixes: b9e0d40c0d83 ("clk: keystone: add Keystone PLL clock driver")
[sboyd@kernel.org: Reword commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: qcom-ep: Switch MHI bus master clock off during L1SS

[ Upstream commit b9cbc06049cb6b7a322d708c2098195fb9fdcc4c ]

Currently, as part of the qcom_pcie_perst_deassert() function, instead
of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable
"val" is re-read.

This must be fixed to ensure that the master clock supplied to the MHI
bus is correctly gated during L1.1/L1.2 to save power.

Thus, replace the line that re-reads "val" with a line that writes the
updated value to the register to clear PARF_MSTR_AXI_CLK_EN.

[kwilczynski: commit log]
Fixes: c457ac029e44 ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS")
Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org
Reported-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: apple: Initialize pcie->nvecs before use

[ Upstream commit d8650c0c2aa2e413594e4cb0faafa9958c1d7782 ]

The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set
up the number of MSIs available for each port. However, it's called
before apple_msi_init(), which initializes pcie->nvecs.

Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such,
initialized as zero. ilog2(0) happens to be 0xffffffff which then simply
configures more MSIs in hardware than we have. This doesn't break
anything because we never hand out those vectors.

Thus, swap the order of the two calls so that the correctly initialized
value is then used.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230311133453.63246-1-sven@svenpeter.dev
Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz

[ Upstream commit dafebd0f9a4f56b10d7fbda0bff1f540d16a2ea4 ]

PLL rate on RK356x is calculated through the simple formula:
((24000000 / _refdiv) * _fbdiv) / (_postdiv1 * _postdiv2)

The PLL rate setting for 78.75MHz seems to be copied from 96MHz
so this patch fixes it and configures it properly.

Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Fixes: 842f4cb72639 ("clk: rockchip: Add more PLL rates for rk3568")
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230614134750.1056293-1-a1ba.omarov@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc8280xp: Add missing GDSCs

[ Upstream commit 4712eb7ff85bd3dd09c6668b8de4080e02b3eea9 ]

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-3-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs

[ Upstream commit 9eba4db02a88e7a810aabd70f7a6960f184f391f ]

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: a66a82f2a55e ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc8280xp: Add missing GDSC flags

[ Upstream commit 2fd02de27054576a4a8c89302e2f77122c55e957 ]

All of the 8280's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.

Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-1-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-sc8280xp: Add EMAC GDSCs

[ Upstream commit 32c2f2a46db1322caaf78d5ea747ed5c56d2e353 ]

Add the EMAC GDSCs to allow the EMAC hardware to be enabled.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230413191541.1073027-2-ahalaney@redhat.com
Stable-dep-of: 2fd02de27054 ("clk: qcom: gcc-sc8280xp: Add missing GDSC flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gpucc-sm6350: Fix clock source names

[ Upstream commit 743913b343a3ec2510fe3c0dfaff03d049659922 ]

fw_name for GCC inputs didn't match the bindings. Fix it.

Fixes: 013804a727a0 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-2-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gpucc-sm6350: Introduce index-based clk lookup

[ Upstream commit f6f89d194e4ddcfe197ac8a05ed4161f642a5c68 ]

Add the nowadays-prefered and marginally faster way of looking up parent
clocks in the device tree. It also allows for clock-names-independent
operation, so long as the order (which is enforced by schema) is kept.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-1-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 743913b343a3 ("clk: qcom: gpucc-sm6350: Fix clock source names")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Fix a memory leak when scanning for an adapter

[ Upstream commit b8d72e32e1453d37ee5c8a219f24e7eeadc471ef ]

The adapter scan ssif_info_find() sets info->adapter_name if the adapter
info came from SMBIOS, as it's not set in that case.  However, this
function can be called more than once, and it will leak the adapter name
if it had already been set.  So check for NULL before setting it.

Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface")
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi:ssif: Add check for kstrdup

[ Upstream commit c5586d0f711e9744d0cade39b0c4a2d116a333ca ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: c4436c9149c5 ("ipmi_ssif: avoid registering duplicate ssif interface")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Message-Id: <20230619092802.35384-1-jiasheng@iscas.ac.cn>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ac97: Fix possible error value of *rac97

[ Upstream commit 67de40c9df94037769967ba28c7d951afb45b7fb ]

Before committing 79597c8bf64c, *rac97 always be NULL if there is
an error. When error happens, make sure *rac97 is NULL is safer.

For examble, in snd_vortex_mixer():
err = snd_ac97_mixer(pbus, &ac97, &vortex->codec);
vortex->isquad = ((vortex->codec == NULL) ?
0 : (vortex->codec->ext_id&0x80));
If error happened but vortex->codec isn't NULL, this may cause some
problems.

Move the judgement order to be clearer and better.

Fixes: 79597c8bf64c ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: Fix overlay type in apply/revert check

[ Upstream commit 6becf8f845ae1f0b1cfed395bbeccbd23654162d ]

The removal check in of_unittest_apply_revert_overlay_check()
always uses the platform device overlay type, while it should use the
actual overlay type, as passed as a parameter to the function.

This has no impact on any current test, as all tests calling
of_unittest_apply_revert_overlay_check() use the platform device overlay
type.

Fixes: d5e75500ca401d31 ("of: unitest: Add I2C overlay unit tests.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ba0234c41ba808f10112094f88792beeb6dbaedf.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: overlay: Call of_changeset_init() early

[ Upstream commit a9515ff4fb142b690a0d2b58782b15903b990dba ]

When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state.

However, of_overlay_apply() calls of_resolve_phandles() before
init_overlay_changeset().  Hence if the overlay fails to apply due to an
unresolved symbol, the overlay_changeset.cset.entries list is still
uninitialized, and cleanup will crash with a NULL-pointer dereference in
overlay_removal_is_ok().

Fix this by moving the call to of_changeset_init() from
init_overlay_changeset() to of_overlay_fdt_apply(), where all other
early initialization is done.

Fixes: f948d6d8b792bb90 ("of: overlay: avoid race condition between applying multiple overlays")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4f1d6d74b61cba2599026adb6d1948ae559ce91f.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: amd: clear dsp to host interrupt status

[ Upstream commit 38592ae6dc9f84b7a994c43de2136b8115ca30f6 ]

DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.

when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.

Fixes: 2e7c6652f9b8 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: raid0: account for split bio in iostat accounting

[ Upstream commit cc22b5407e9ca76adb7efeed843146510b1b72a5 ]

When a bio is split by md raid0, the newly created bio will not be tracked
by md for I/O accounting. Only the portion of I/O still assigned to the
original bio which was reduced by the split will be accounted for. This
results in md iostat data sometimes showing I/O values far below the actual
amount of data being sent through md.

md_account_bio() needs to be called for all bio generated by the bio split.

A simple example of the issue was generated using a raid0 device on partitions
to the same device. Since all raid0 I/O then goes to one device, it makes it
easy to see a gap between the md device and its sd storage. Reading an lvm
device on top of the md device, the iostat output (some 0 columns and extra
devices removed to make the data more compact) was:

Device             tps    kB_read/s    kB_wrtn/s    kB_dscd/s    kB_read
md2               0.00         0.00         0.00         0.00          0
sde               0.00         0.00         0.00         0.00          0
md2            1364.00    411496.00         0.00         0.00     411496
sde            1734.00    646144.00         0.00         0.00     646144
md2            1699.00    510680.00         0.00         0.00     510680
sde            2155.00    802784.00         0.00         0.00     802784
md2             803.00    241480.00         0.00         0.00     241480
sde            1016.00    377888.00         0.00         0.00     377888
md2               0.00         0.00         0.00         0.00          0
sde               0.00         0.00         0.00         0.00          0

I/O was generated doing large direct I/O reads (12M) with dd to a linear
lvm volume on top of the 4 leg raid0 device.

The md2 reads were showing as roughly 2/3 of the reads to the sde device
containing all of md2's raid partitions. The sum of reads to sde was
1826816 kB, which was the expected amount as it was the amount read by
dd. With the patch, the total reads from md will match the reads from
sde and be consistent with the amount of I/O generated.

Fixes: 10764815ff47 ("md: add io accounting for raid0 and raid5")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230816181433.13289-1-djeffery@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid0: Fix performance regression for large sequential writes

[ Upstream commit 319ff40a542736d67e5bce18635de35d0e7a0bff ]

Commit f00d7c85be9e ("md/raid0: fix up bio splitting.") among other
things changed how bio that needs to be split is submitted. Before this
commit, we have split the bio, mapped and submitted each part. After
this commit, we map only the first part of the split bio and submit the
second part unmapped. Due to bio sorting in __submit_bio_noacct() this
results in the following request ordering:

  9,0   18     1181     0.525037895 15995  Q  WS 1479315464 + 63392

  Split off chunk-sized (1024 sectors) request:

  9,0   18     1182     0.629019647 15995  X  WS 1479315464 / 1479316488

  Request is unaligned to the chunk so it's split in
  raid0_make_request().  This is the first part mapped and punted to
  bio_list:

  8,0   18     7053     0.629020455 15995  A  WS 739921928 + 1016 <- (9,0) 1479315464

  Now raid0_make_request() returns, second part is postponed on
  bio_list. __submit_bio_noacct() resorts the bio_list, mapped request
  is submitted to the underlying device:

  8,0   18     7054     0.629022782 15995  G  WS 739921928 + 1016

  Now we take another request from the bio_list which is the remainder
  of the original huge request. Split off another chunk-sized bit from
  it and the situation repeats:

  9,0   18     1183     0.629024499 15995  X  WS 1479316488 / 1479317512
  8,16  18     6998     0.629025110 15995  A  WS 739921928 + 1016 <- (9,0) 1479316488
  8,16  18     6999     0.629026728 15995  G  WS 739921928 + 1016
  ...
  9,0   18     1184     0.629032940 15995  X  WS 1479317512 / 1479318536 [libnetacq-write]
  8,0   18     7059     0.629033294 15995  A  WS 739922952 + 1016 <- (9,0) 1479317512
  8,0   18     7060     0.629033902 15995  G  WS 739922952 + 1016
  ...

  This repeats until we consume the whole original huge request. Now we
  finally get to processing the second parts of the split off requests
  (in reverse order):

  8,16  18     7181     0.629161384 15995  A  WS 739952640 + 8 <- (9,0) 1479377920
  8,0   18     7239     0.629162140 15995  A  WS 739952640 + 8 <- (9,0) 1479376896
  8,16  18     7186     0.629163881 15995  A  WS 739951616 + 8 <- (9,0) 1479375872
  8,0   18     7242     0.629164421 15995  A  WS 739951616 + 8 <- (9,0) 1479374848
  ...

I guess it is obvious that this IO pattern is extremely inefficient way
to perform sequential IO. It also makes bio_list to grow to rather long
lengths.

Change raid0_make_request() to map both parts of the split bio. Since we
know we are provided with at most chunk-sized bios, we will always need
to split the incoming bio at most once.

Fixes: f00d7c85be9e ("md/raid0: fix up bio splitting.")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-2-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid0: Factor out helper for mapping and submitting a bio

[ Upstream commit af50e20afb401cc203bd2a9ff62ece0ae4976103 ]

Factor out helper function for mapping and submitting a bio out of
raid0_make_request(). We will use it later for submitting both parts of
a split bio.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-1-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 319ff40a5427 ("md/raid0: Fix performance regression for large sequential writes")
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: add error_handlers for raid0 and linear

[ Upstream commit c31fea2f8e2a72c817f318016bbc327095175a9f ]

After the commit 9631abdbf406c("md: Set MD_BROKEN for RAID1 and RAID10")
MD_BROKEN must be set if array is failed because state_store() checks it.
If it is set then -EBUSY is returned to userspace.

For raid0 and linear MD_BROKEN is not set by error_handler(). As a result
mdadm is unable to trigger clean-up actions. It is a regression.

This patch adds appropriate error_handler for raid0 and linear. The
error handler sets MD_BROKEN for this device.

Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230306130317.3418-1-mariusz.tkaczyk@linux.intel.com
Stable-dep-of: 319ff40a5427 ("md/raid0: Fix performance regression for large sequential writes")
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: cs_dsp: Fix new control name check

[ Upstream commit 7ac1102b227b36550452b663fd39ab1c09378a95 ]

Before adding a new FW control, its name is checked against
existing controls list. But the string length in strncmp used
to compare controls names is taken from the list, so if beginnings
of the controls are matching,  then the new control is not created.
For example, if CAL_R control already exists, CAL_R_SELECTED
is not created.
The fix is to compare string lengths as well.

Fixes: 6477960755fb ("ASoC: wm_adsp: Move check for control existence")
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815172908.3454056-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()

[ Upstream commit 0d0bd28c500173bfca78aa840f8f36d261ef1765 ]

r5l_flush_stripe_to_raid() will check if the list 'flushing_ios' is
empty, and then submit 'flush_bio', however, r5l_log_flush_endio()
is clearing the list first and then clear the bio, which will cause
null-ptr-deref:

T1: submit flush io
raid5d
 handle_active_stripes
  r5l_flush_stripe_to_raid
   // list is empty
   // add 'io_end_ios' to the list
   bio_init
   submit_bio
   // io1

T2: io1 is done
r5l_log_flush_endio
 list_splice_tail_init
 // clear the list
T3: submit new flush io
...
r5l_flush_stripe_to_raid
 // list is empty
 // add 'io_end_ios' to the list
 bio_init
 bio_uninit
 // clear bio->bi_blkg
 submit_bio
 // null-ptr-deref

Fix this problem by clearing bio before clearing the list in
r5l_log_flush_endio().

Fixes: 0dd00cba99c3 ("raid5-cache: fully initialize flush_bio when needed")
Reported-and-tested-by: Corey Hickey <bugfood-ml@fatooh.org>
Closes: https://lore.kernel.org/all/cddd7213-3dfd-4ab7-a3ac-edd54d74a626@fatooh.org/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid5-cache: fix a deadlock in r5l_exit_log()

[ Upstream commit a705b11b358dee677aad80630e7608b2d5f56691 ]

Commit b13015af94cf ("md/raid5-cache: Clear conf->log after finishing
work") introduce a new problem:

// caller hold reconfig_mutex
r5l_exit_log
 flush_work(&log->disable_writeback_work)
r5c_disable_writeback_async
 wait_event
  /*
   * conf->log is not NULL, and mddev_trylock()
   * will fail, wait_event() can never pass.
   */
 conf->log = NULL

Fix this problem by setting 'config->log' to NULL before wake_up() as it
used to be, so that wait_event() from r5c_disable_writeback_async() can
exist. In the meantime, move forward md_unregister_thread() so that
null-ptr-deref this commit fixed can still be fixed.

Fixes: b13015af94cf ("md/raid5-cache: Clear conf->log after finishing work")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230708091727.1417894-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>