drm/cirrus: Replace module-init boiler-plate code with DRM helpers

Remove custom cirrus_init() and cirrus_exit() functions and initialize
the module with DRM module helpers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-5-javierm@redhat.com

drm/bochs: Replace module-init boiler-plate code with DRM helpers

Remove custom bochs_init() and bochs_exit() functions and initialize
the module with DRM module helpers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-4-javierm@redhat.com

drm/ast: Replace module-init boiler-plate code with DRM helpers

Remove custom ast_init() and ast_exit() functions and initialize the
module with DRM module helpers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-3-javierm@redhat.com

drm: Provide PCI module-init macros

Provide helper macros to register PCI-based DRM drivers. The new
macros behave like module_pci_driver() with an additional test if
DRM modesetting has been enabled.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222082831.196562-2-javierm@redhat.com

drm/selftests/test-drm_dp_mst_helper: Fix memory leak in sideband_msg_req_encode_decode

Avoid leaking the "out" variable if it is not possible to allocate
the "txmsg" variable.

Fixes: 09234b88ef55 ("drm/selftests/test-drm_dp_mst_helper: Move 'sideband_msg_req_encode_decode' onto the heap")
Addresses-Coverity-ID: 1475685 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220108165812.46797-1-jose.exposito89@gmail.com

drm/doc: Fix TTM acronym

The TTM acronym is defined for the first time in the documentation as
"Translation Table Maps". Afterwards, "Translation Table Manager" is
used as definition.

Fix the first definition to avoid confusion.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107180230.132666-1-jose.exposito89@gmail.com

drm/ast: Create threshold values for AST2600

The threshold value is used for AST2600 only.

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117083643.41493-1-kuohsiang_chou@aspeedtech.com

mgag200 fix memmapsl configuration in GCTL6 register

On some servers with MGA G200_SE_A (rev 42), booting with Legacy BIOS,
the hardware hangs when using kdump and kexec into the kdump kernel.
This happens when the uncompress code tries to write "Decompressing Linux"
to the VGA Console.

It can be reproduced by writing to the VGA console (0xB8000) after
booting to graphic mode, it generates the following error:

kernel:NMI: PCI system error (SERR) for reason a0 on CPU 0.
kernel:Dazed and confused, but trying to continue

The root cause is the configuration of the MGA GCTL6 register

According to the GCTL6 register documentation:

bit 0 is gcgrmode:
    0: Enables alpha mode, and the character generator addressing system is
     activated.
    1: Enables graphics mode, and the character addressing system is not
     used.

bit 1 is chainodd even:
    0: The A0 signal of the memory address bus is used during system memory
     addressing.
    1: Allows A0 to be replaced by either the A16 signal of the system
     address (ifmemmapsl is ‘00’), or by the hpgoddev (MISC<5>, odd/even
     page select) field, described on page 3-294).

bit 3-2 are memmapsl:
    Memory map select bits 1 and 0. VGA.
    These bits select where the video memory is mapped, as shown below:
        00 => A0000h - BFFFFh
        01 => A0000h - AFFFFh
        10 => B0000h - B7FFFh
        11 => B8000h - BFFFFh

bit 7-4 are reserved.

Current code set it to 0x05 => memmapsl to b01 => 0xa0000 (graphic mode)
But on x86, the VGA console is at 0xb8000 (text mode)
In arch/x86/boot/compressed/misc.c debug strings are written to 0xb8000
As the driver doesn't use this mapping at 0xa0000, it is safe to set it to
0xb8000 instead, to avoid kernel hang on G200_SE_A rev42, with kexec/kdump.

Thus changing the value 0x05 to 0x0d

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220119102905.1194787-1-jfalempe@redhat.com

drm/bridge: Remove extra device acquisition method of i2c client in lt9611 driver

We have got the device of i2c client in probe function. So we should remove
extra device acquisition method of i2c client.

Signed-off-by: Zhiming Liu <lzmlzmhh@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117154150.5145-1-lzmlzmhh@gmail.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/msm: Fix include statements for DisplayPort

Update the include statements for DisplayPort helpers. The header
files are in the dp/ subdirectory.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5b529e8d9c38 ("drm/dp: Move public DisplayPort headers into dp/")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220118154450.25947-1-tzimmermann@suse.de

drm/selftests: Select DRM_DP_HELPER

Resolve warnings about non-existing symbols by selecting DRM_DP_HELPER.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: adb9d5a2cc77 ("drm/dp: Move DisplayPort helpers into separate helper module")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220118154418.25932-1-tzimmermann@suse.de

dma-buf: drop excl_fence parameter from dma_resv_get_fences

Returning the exclusive fence separately is no longer used.

Instead add a write parameter to indicate the use case.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211207123411.167006-4-christian.koenig@amd.com

drm/amdgpu: remove excl as shared workarounds

This was added because of the now dropped shared on excl dependency.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211123142111.3885-15-christian.koenig@amd.com

drm: move the buddy allocator from i915 into common drm

Move the base i915 buddy allocator code into drm
- Move i915_buddy.h to include/drm
- Move i915_buddy.c to drm root folder
- Rename "i915" string with "drm" string wherever applicable
- Rename "I915" string with "DRM" string wherever applicable
- Fix header file dependencies
- Fix alignment issues
- add Makefile support for drm buddy
- export functions and write kerneldoc description
- Remove i915 selftest config check condition as buddy selftest
  will be moved to drm selftest folder

cleanup i915 buddy references in i915 driver module
and replace with drm buddy

v2:
  - include header file in alphabetical order(Thomas)
  - merged changes listed in the body section into a single patch
    to keep the build intact(Christian, Jani)

v3:
  - make drm buddy a separate module(Thomas, Christian)

v4:
  - Fix build error reported by kernel test robot <lkp@intel.com>
  - removed i915 buddy selftest from i915_mock_selftests.h to
    avoid build error
  - removed selftests/i915_buddy.c file as we create a new set of
    buddy test cases in drm/selftests folder

v5:
  - Fix merge conflict issue

v6:
  - replace drm_buddy_mm structure name as drm_buddy(Thomas, Christian)
  - replace drm_buddy_alloc() function name as drm_buddy_alloc_blocks()
    (Thomas)
  - replace drm_buddy_free() function name as drm_buddy_free_block()
    (Thomas)
  - export drm_buddy_free_block() function
  - fix multiple instances of KMEM_CACHE() entry

v7:
  - fix warnings reported by kernel test robot <lkp@intel.com>
  - modify the license(Christian)

v8:
  - fix warnings reported by kernel test robot <lkp@intel.com>

Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118104504.2349-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free()

If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it
happened in the bug report by syzbot), virtio_gpu_array_put_free() could be
called with objs equal to NULL.

Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise
return from the function.

Cc: stable@vger.kernel.org # 5.13.x
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reported-by: syzbot+e9072e90624a31dfa85f@syzkaller.appspotmail.com
Fixes: 377f8331d0565 ("drm/virtio: fix possible leak/unlock virtio_gpu_object_array")
Link: http://patchwork.freedesktop.org/patch/msgid/20211213183122.838119-1-roberto.sassu@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

udmabuf: validate ubuf->pagecount

Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The
problem was in ubuf->pages == ZERO_PTR.

ubuf->pagecount is calculated from arguments passed from user-space. If
user creates udmabuf with list.size == 0 then ubuf->pagecount will be
also equal to zero; it causes kmalloc_array() to return ZERO_PTR.

Fix it by validating ubuf->pagecount before passing it to
kmalloc_array().

Fixes: fbb0de795078 ("Add udmabuf misc device")
Reported-and-tested-by: syzbot+2c56b725ec547fa9cb29@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211230142649.23022-1-paskripkin@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found

It will connect to the mipi dsi host and find the corresponding
mipi dsi host node, but the node registered by the mipi dsi host
has not been loaded yet. of_find_mipi_dsi_host_by_node() returns -EINVAL
which causes the calling driver to fail.

If the anx7625 driver is loaded afterwards the driver requesting
the mipi dsi host will not notice this.

Better approach is to return -EPROBE_DEFER in such case.
Then when the anx7625 driver appears the driver requesting
the mipi dsi host will be probed again.

Signed-off-by: owen <qwt9588@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117100949.9542-1-qwt9588@gamil.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/dp: Move DisplayPort AUX bus helpers into dp/

Move drm_dp_aux_bus.c and its header file into the DP subdirectory
and update all users. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-6-tzimmermann@suse.de

drm/dp: Move public DisplayPort headers into dp/

Move all public DisplayPort headers into dp/ and update users. No
functional changes.

v3:
* rebased onto latest drm-tip

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-5-tzimmermann@suse.de

drm/dp: Move DisplayPort helpers into separate helper module

Move DisplayPort functions into a separate module to reduce the size
of the KMS helpers. Select DRM_DP_HELPER for all users of the code. To
avoid naming conflicts, rename drm_dp_helper.c to drm_dp.c

This change can help to reduce the size of the kernel binary. Some
numbers from a x86-64 test build:

Before:
drm_kms_helper.ko: 447480 bytes

After:
drm_dp_helper.ko: 216632 bytes
drm_kms_helper.ko: 239424 bytes

For early-boot graphics, generic DRM drivers, such as simpledrm,
require DRM KMS helpers to be built into the kernel. Generic helper
functions for DisplayPort take up a significant portion of DRM KMS
helper library. These functions are not used by generic drivers and
can be loaded as a module.

v3:
* fix include statement in DRM selftests
v2:
* move DP helper code into dp/ (Jani)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Lyude Paul <lyude@redhat.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-4-tzimmermann@suse.de

drm/dp: Move DP declarations into separate header file

Split the DP declarations from other helpers before moving the
DP functions into a separate module.

v2:
* forward-declare struct drm_dp_aux (Jani)
* add include guards in drm_dp_helper_internal.h

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-3-tzimmermann@suse.de

drm/dp_mst: Remove trailing whitespace.

Fix coding style.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-2-tzimmermann@suse.de

drm/bridge: sii902x: add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR

This adds support for DRM_BRIDGE_ATTACH_NO_CONNECTOR by adding the
bridge get_edid() and detect() callbacks after refactoring the connector
get_modes() and connector_detect() callbacks.

In order to keep the bridge working, extra code in get_modes() has been
moved to more logical places.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220113144305.1074389-1-narmstrong@baylibre.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/panfrost: initial dual core group GPUs support

On a dual core group GPUs (such as T628) fragment shading can be
performed over all cores (because a fragment shader job doesn't
need coherency between threads), however vertex shading requires
to be run on the same core group as the tiler (which always lives
in core group 0).

As a first step to support T628 power on only the first core group
(so no jobs are scheduled on the second one). This makes T628 look
like every other Midgard GPU (and throws away up to half the cores).

With this patch panfrost is able to drive T628 (r1p0) GPU on some
armv8 SoCs (in particular BE-M1000). Without the patch rendering
is horribly broken (desktop is completely unusable) and eventually
the GPU locks up (it takes from a few seconds to a couple of
minutes).

Using the second core group requires support in Mesa (and an UABI
change): the userspace should

1) set PANFROST_JD_DOESNT_NEED_COHERENCY_ON_GPU flag to opt-in
   to allowing the job to run across all cores.
2) set PANFROST_RUN_ON_SECOND_CORE_GROUP flag to allow compute
   jobs to be run on the second core group (at the moment Mesa
   does not advertise compute support on anything older than
   Mali T760)

But there's little point adding such flags until someone (myself)
steps up to do the Mesa work.

Signed-off-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Signed-off-by: Vadim V. Vlasov <vadim.vlasov@elpitech.ru>
Tested-by: Alexey Sheplyakov <asheplyakov@basealt.ru>
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220115160658.582646-1-asheplyakov@basealt.ru

drm: bridge: fix unmet dependency on DRM_KMS_HELPER for DRM_PANEL_BRIDGE

When DRM_CHIPONE_ICN6211 is selected, and DRM_KMS_HELPER is not selected,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE
  Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n]
  Selected by [y]:
  - DRM_CHIPONE_ICN6211 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y]

This is because DRM_CHIPONE_ICN6211 selects DRM_PANEL_BRIDGE
without depending on or selecting DRM_KMS_HELPER,
despite DRM_PANEL_BRIDGE depending on DRM_KMS_HELPER.

This unmet dependency bug was detected by Kismet,
a static analysis tool for Kconfig.

Fixes: ce517f18944e ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220117052146.75811-1-julianbraha@gmail.com

video: fbdev: s3c-fb: remove redundant initialization of pointer bufs

Pointer bufs is being initialized with a value that is never read, it
is being re-assigned with a different value later on. The assignment
is redundant and can be removed. Cleans up clang-scan warning:

drivers/video/fbdev/s3c-fb.c:492:16: warning: Value stored to 'buf'
during its initialization is never read [deadcode.DeadStores]
        void __iomem *buf = regs;

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230160626.404072-1-colin.i.king@gmail.com

video: fbdev: asiliantfb: remove redundant assignment to variable Ftarget

Variable Ftarget is being initialized with a value that is never read,
it is being re-assigned a different value a little later on. The
assignment is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230155202.355336-1-colin.i.king@gmail.com

agp/via: Remove unused variable 'current_size'

Fix the compiler warning

  drivers/char/agp/via-agp.c: In function 'via_configure_agp3':
  drivers/char/agp/via-agp.c:131:35: warning: variable 'current_size' set but not used [-Wunused-but-set-variable]
    131 |         struct aper_size_info_16 *current_size;

by removing the variable.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201114645.15384-8-tzimmermann@suse.de

agp/sworks: Remove unused variable 'current_size'

Fix the compiler warning

  drivers/char/agp/sworks-agp.c: In function 'serverworks_configure':
  drivers/char/agp/sworks-agp.c:265:37: warning: variable 'current_size' set but not used [-Wunused-but-set-variable]
    265 |         struct aper_size_info_lvl2 *current_size;

by removing the variable.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201114645.15384-7-tzimmermann@suse.de

agp/nvidia: Declare value returned by readl() as unused

Fix the compiler warning

  drivers/char/agp/nvidia-agp.c: In function 'nvidia_tlbflush':
  drivers/char/agp/nvidia-agp.c:264:22: warning: variable 'temp' set but not used [-Wunused-but-set-variable]
    264 |         u32 wbc_reg, temp;

by marking the temp variable with __maybe_unused. The affected readl()
is only required for flushing caches, but the returned value is not of
interest.

v2:
* declare temp as __maybe_unused (Helge)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201114645.15384-6-tzimmermann@suse.de

agp/ati: Return error from ati_create_page_map()

Fix the compiler warning

  drivers/char/agp/ati-agp.c: In function 'ati_create_page_map':
  drivers/char/agp/ati-agp.c:58:16: warning: variable 'err' set but not used [-Wunused-but-set-variable]
    58 |         int i, err = 0;

by returing the error to the caller.

v2:
* free page in error branch (Helge)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201114645.15384-5-tzimmermann@suse.de

agp: Documentation fixes

Fix compiler warnings

  drivers/char/agp/backend.c:68: warning: Function parameter or member 'pdev' not described in 'agp_backend_acquire'
  drivers/char/agp/backend.c:93: warning: Function parameter or member 'bridge' not described in 'agp_backend_release'

by adding the necessary documentation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201114645.15384-4-tzimmermann@suse.de

agp: Include "compat_ioctl.h" where necessary

Fix compiler warnings like

  drivers/char/agp/frontend.c:46:20: warning: no previous prototype for 'agp_find_mem_by_key' [-Wmissing-prototypes]
    46 | struct agp_memory *agp_find_mem_by_key(int key)

by including the compat_ioctl.h in the source file.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201114645.15384-3-tzimmermann@suse.de

agp: Remove trailing whitespaces

Trivial coding-style fix.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201114645.15384-2-tzimmermann@suse.de

drm/vc4: remove redundant assignment of variable size

The variable 'size' is being assigned a value that is never read,
the assignment is redundant and can be removed. Cleans up clang-scan
warning:

drivers/gpu/drm/vc4/vc4_bo.c:358:2: warning: Value stored to 'size'
is never read [deadcode.DeadStores]
        size = roundup(size, PAGE_SIZE);

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112232036.1182846-1-colin.i.king@gmail.com

drm: bridge: it66121: Remove redundant check

ctx->next_bridge is checked for NULL twice in a row. The second
conditional is redundant, so remove it.

Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114064012.1670612-1-ddavenport@chromium.org

locking/rwsem: drop redundant semicolon of down_write_nest_lock

Otherwise, braces are needed when using it.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220114083742.6219-1-guchun.chen@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/bridge: dw-mipi-dsi: Switch to atomic operations

Replace atomic version of the enable/disable operations to
continue the transition to the atomic API.

Also added default drm atomic operations for duplicate, destroy
and reset state API's in order to have smooth transition on
atomic API's.

Tested on Engicam i.Core STM32MP1 SoM.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112061741.120898-1-jagan@amarulasolutions.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/stm: ltdc: Drop format_mod_supported function

The "drm_plane_funcs.format_mod_supported" can be removed in favor of
the default implementation.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Yannick Fertre <yannick.fertre@foss.st.com>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # i.Core STM32MP1
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222090552.25972-7-jose.exposito89@gmail.com

drm/stm: ltdc: add support of ycbcr pixel formats

This patch adds the following YCbCr input pixel formats on the latest
LTDC hardware version:

1 plane  (co-planar)  : YUYV, YVYU, UYVY, VYUY
2 planes (semi-planar): NV12, NV21
3 planes (full-planar): YU12=I420=DRM YUV420, YV12=DRM YVU420

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215214843.20703-1-yannick.fertre@foss.st.com

drm/stm: ltdc: add support of flexible pixel formats

This feature allows the generation of any RGB pixel format.
The list of supported formats is no longer linked to the
register LXPFCR_PF, that the reason why a list of drm formats is
defined for each display controller version.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Tested-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215214835.20593-1-yannick.fertre@foss.st.com

drm/stm: ltdc: add per plane update support

Recent ltdc hardware versions offer the ability
to update a plane independently of others planes.
This is could be useful especially if a plane is
assigned to another OS.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215214817.20310-1-yannick.fertre@foss.st.com

drm/stm: ltdc: add YCbCr 422 output support

LTDC 40100 hw version supports the YCbCr 422 output,
reducing the output pins from 24 to 16. This feature
is useful for some external devices like HDMI bridges.

Both ITU-R BT.601 & ITU-R BT.709 are supported.

It is also possible to choose the chrominance order between
* Cb is output first (Y0Cb, then Y1Cr, Y2Cb and so on).
* Cr is output first (Y0Cr, then Y1Cb, Y2Cr and so on).

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215214750.20105-1-yannick.fertre@foss.st.com

drm/stm: ltdc: switch to regmap

Replace the legacy register access by regmap API.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Tested-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215214738.19946-1-yannick.fertre@foss.st.com

drm/panfrost: Merge some feature lists

Now that we only list features of interest to kernel space, lots of GPUs
have the same feature bits. To cut down on the repetition in the file,
merge feature lists that are identical between similar GPUs.

Note that this leaves some unmerged identical Bifrost feature lists, as
there are more features affecting Bifrost kernel space that we do not
yet handle.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
[Steve: fix typo in commit message]
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109170920.2921-3-alyssa.rosenzweig@collabora.com

drm/panfrost: Remove features meant for userspace

Early versions of the legacy kernel driver included comprehensive
feature lists for every GPU, even though most of the enumerated features
only matter to userspace. For example, HW_FEATURE_INTERPIPE_REG_ALIASING
was a feature bit indicating that a GPU had "interpipe register
aliasing": arithmetic, load/store, and texture instruction all use
common general-purpose registers. GPUs without this feature bit have
dedicated load/store and texture "registers". Whether a GPU has this
feature or not is irrelevant to the kernel; it only matters in the
userspace compiler's register allocator. It's silly to enumerate it in
kernel space, and the information is understandably unused. To
underscore the point, this feature only makes sense in the context of
the Midgard instruction set. Bifrost never had dedicated load/store or
texture registers, so the feature bit was vacuously set for all Bifrost
hardware, even though this conveys no useful information.

To clean up the feature list, delete feature bits which could not
possibly matter to the kernel, leaving only those which do affect the
register-level operation of the chip.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109170920.2921-2-alyssa.rosenzweig@collabora.com

drm/panfrost: Check for error num after setting mask

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.

Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[Steve: fix Fixes: line]
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106030326.2620942-1-jiasheng@iscas.ac.cn

video: vga16fb: Fix logic that checks for the display standard

The vga16fb framebuffer driver supports both Enhanced Graphics Adapter
(EGA) and Video Graphics Array (VGA) 16 color graphic cards.

But the logic to check whether the EGA or VGA standard are used is not
correct. It just checks if screen_info.orig_video_isVGA is set, but it
should check if is set to VIDEO_TYPE_VGAC instead.

This means that it assumes to be VGA even if is set to VIDEO_TYPE_EGAC.

All non-x86 architectures though treat orig_video_isVGA as a boolean so
only do the change for x86 and keep the old logic for the other arches.

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Kris Karas <bugs-a21@moonlit-rail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110095625.278836-2-javierm@redhat.com

drm: bridge: nwl-dsi: Drop panel_bridge from nwl_dsi

panel_bridge pointer never used anywhere except the one it
looked up at nwl_dsi_bridge_attach.

Drop it from the nwl_dsi structure.

Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110172533.66614-1-jagan@amarulasolutions.com

drm/bridge: adv7533: make array clock_div_by_lanes static const

Don't populate the read-only array clock_div_by_lanes on the stack but
instead it static const. Also makes the object code a little smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109204105.51878-1-colin.i.king@gmail.com

Revert "drm: exynos: dsi: Convert to bridge driver"

This reverts commit 92e794fab87af0793403d5e4a547f0be94a0e656.

It is merged by accident, the actual patch series on this bridge
conversion is still under review.

Revert this as it breaks the exynos DSI.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111184347.502471-1-jagan@amarulasolutions.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/mipi-dbi: Fix source-buffer address in mipi_dbi_buf_copy

Set the source-buffer address after mapping the buffer into the
kernel's address space. Makes MIPI DBI helpers work again.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: c47160d8edcd ("drm/mipi-dbi: Remove dependency on GEM CMA helper library")
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reported-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111132634.18302-1-tzimmermann@suse.de

drm/gma500: remove redundant ret variable

Return value directly instead of taking this in another redundant
variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220112082524.667552-1-chi.minghao@zte.com.cn

drm/doc: overview before functions for drm_writeback.c

Otherwise it's really hard to link to that, which I realized when I
wanted to link to the property definitions for a question on irc.

Fix it.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: e2d7fc20b3e2 ("drm/writeback: wire drm_writeback.h to kernel-doc")
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111202714.1128406-1-daniel.vetter@ffwll.ch

drm/v3d/v3d_drv: Check for error num after setting mask

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Also, we can create a variable for the mask to solve the
alignment issue.

Fixes: 334dd38a3878 ("drm/v3d: Set dma_mask as well as coherent_dma_mask")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110013807.4105270-1-jiasheng@iscas.ac.cn

drm/mst: use DP_GET_SINK_COUNT() for sink count in ESI

Take bit 7 into account when reading sink count from
DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220104184857.784563-2-jani.nikula@intel.com

drm/dp: note that DPCD 0x2002-0x2003 match 0x200-0x201

DP_SINK_COUNT_ESI and DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 have the same
contents as DP_SINK_COUNT and DP_DEVICE_SERVICE_IRQ_VECTOR,
respectively.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220104184857.784563-1-jani.nikula@intel.com

drm/vc4: Notify the firmware when DRM is in charge

Once the call to drm_fb_helper_remove_conflicting_framebuffers() has
been made, simplefb has been unregistered and the KMS driver is entirely
in charge of the display.

Thus, we can notify the firmware it can free whatever resource it was
using to maintain simplefb functional.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-5-maxime@cerno.tech

drm/vc4: Remove conflicting framebuffers before callind bind_all

The bind hooks will modify their controller registers, so simplefb is
going to be unusable anyway. Let's avoid any transient state where it
could still be in the system but no longer functionnal.

Acked-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-4-maxime@cerno.tech

drm/vc4: Support nomodeset

If we have nomodeset on the kernel command line we should have the
firmware framebuffer driver kept as is and not try to load the
full-blown KMS driver.

In this case, let's just register the v3d driver.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-3-maxime@cerno.tech

firmware: raspberrypi: Add RPI_FIRMWARE_NOTIFY_DISPLAY_DONE

The RPI_FIRMWARE_NOTIFY_DISPLAY_DONE firmware call allows to tell the
firmware the kernel is in charge of the display now and the firmware can
free whatever resources it was using.

Acked-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215095117.176435-2-maxime@cerno.tech

dma-buf-map: Fix dot vs comma in example

Fix typo: separate arguments with comma rather than dot.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220111003305.1214667-1-lucas.demarchi@intel.com

drm/panfrost: Update create_bo flags comment

Update a comment stating create_bo took no flags, since it now takes a
bit mask of optional flags NOEXEC and HEAP.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109163704.2564-1-alyssa.rosenzweig@collabora.com

drm/privacy_screen_x86: Add entry for ChromeOS privacy-screen

Add a static entry in the x86 table, to detect and wait for
privacy-screen on some ChromeOS platforms.

Please note that this means that if CONFIG_CHROMEOS_PRIVACY_SCREEN is
enabled, and if "GOOG0010" device is found in ACPI, then the i915 probe
shall return EPROBE_DEFER until a platform driver actually registers the
privacy-screen: https://hansdegoede.livejournal.com/25948.html

Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107190208.95479-3-rajatja@google.com

platform/chrome: Add driver for ChromeOS privacy-screen

This adds the ACPI driver for the ChromeOS privacy screen that is
present on some chromeos devices.

Note that ideally, we'd want this privacy screen driver to be probed
BEFORE the drm probe in order to avoid a drm probe deferral:
https://hansdegoede.livejournal.com/25948.html

In practise, I found that ACPI drivers are bound to their devices AFTER
the drm probe on chromebooks. So on chromebooks with privacy-screen,
this patch along with the other one in this series results in a probe
deferral of about 250ms for i915 driver. However, it did not result in
any user noticeable delay of splash screen in my personal experience.

In future if this probe deferral turns out to be an issue, we can
consider turning this ACPI driver into something that is probed
earlier than the drm drivers.

Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107190208.95479-2-rajatja@google.com

drm/privacy_screen: Add drvdata in drm_privacy_screen

Allow a privacy screen provider to stash its private data pointer in the
drm_privacy_screen, and update the drm_privacy_screen_register() call to
accept that. Also introduce a *_get_drvdata() so that it can retrieved
back when needed.

This also touches the IBM Thinkpad platform driver, the only user of
privacy screen today, to pass NULL for now to the updated API.

Signed-off-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107190208.95479-1-rajatja@google.com

drm: bridge: adv7511: Fix ADV7535 HPD enablement

Existing HPD enablement logic is not compatible with ADV7535
bridge, thus any runtime plug-in of HDMI cable is not working
on these bridge designs.

Unlike other ADV7511 family of bridges, the ADV7535 require
HPD_OVERRIDE bit to set and reset for proper handling of HPD
functionality.

Fix it.

Fixes: 8501fe4b14a3 ("drm: bridge: adv7511: Add support for ADV7535")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109172949.168167-1-jagan@amarulasolutions.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: anx7625: add audio codec .get_eld support

Provide .get_eld interface in hdmi_codec_ops for hdmi-codec driver.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106100127.1862702-3-xji@analogixsemi.com

drm/bridge: anx7625: add HDCP support

This patch provides HDCP setting interface for userspace to dynamic
enable/disable HDCP function.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106100127.1862702-2-xji@analogixsemi.com

drm/bridge: anx7625: Add bridge helper atomic conversion

Add bridge helper atomic conversion.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106100127.1862702-1-xji@analogixsemi.com

drm/vkms: drop "Multiple overlay planes" TODO

Remove the task from the TODO list.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107182809.141003-3-jose.exposito89@gmail.com

drm/vkms: add support for multiple overlay planes

Create 8 overlay planes instead of 1 when the "enable_overlay" module
parameter is set.

The following igt-gpu-tools tests were executed without finding
regressions. Notice than the numbers are identical:

                    |     master branch     |      this  patch      |
                    | SUCCESS | SKIP | FAIL | SUCCESS | SKIP | FAIL |
 kms_atomic         |      10 |   02 |   00 |      10 |   02 |   00 |
 kms_plane_cursor   |      09 |   45 |   00 |      09 |   45 |   00 |
 kms_plane_multiple |      01 |   23 |   00 |      01 |   23 |   00 |
 kms_writeback      |      04 |   00 |   00 |      04 |   00 |   00 |

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107182809.141003-2-jose.exposito89@gmail.com

drm/vkms: refactor overlay plane creation

Move the logic to create an overlay plane to its own function.
Refactor, no functional changes.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220107182809.141003-1-jose.exposito89@gmail.com

drm/bridge/tc358775: Fix for dual-link LVDS

Fixed wrong register shift for single/dual link LVDS output.

Tested-by: Jiri Vanek <jirivanek1@gmail.com>
Signed-off-by: Jiri Vanek <jirivanek1@gmail.com>
Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106190027.1498-1-jirivanek1@gmail.com

drm: omapdrm: Fix implicit dma_buf fencing

Currently omapdrm driver does not initialize dma_buf_export_info resv
member, which leads to a new dma_resv being allocated and attached to
the exported dma_buf. This leads to the issue that fences created on
dma_buf objects imported by other drivers are ignored by omapdrm, as only
fences in gem object resv are waited on. This leads to various issues like
displaying incomplete frames.

Fix that by initializing dma_buf resv to the resv of the gem object being
exported.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1641397018-29872-1-git-send-email-ivo.g.dimitrov.75@gmail.com

drm/ast: Enable the supporting of wide screen on AST2600

Enable the supporting of wide sscreen on AST2600, so that the resolution
of 16:9 and 16:10 are able to be selected on Display Settings.

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211229082749.5415-1-kuohsiang_chou@aspeedtech.com

drm/panel: Update Boe-tv110c9m initial code

Optimize two problems

a)Turn off low voltage detection register.During the esd test,
the low-voltage detection ic may be triggered to enter the slpin state,
so a black screen occurs on the panel.
b)Optimize CMD2 page1 gamma.

Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211231045056.118640-1-yangcong5@huaqin.corp-partner.google.com

drm/plane: Fix typo in format_mod_supported documentation

Fix minor typo: "valdiate" -> "validate".

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20211226112503.31771-3-jose.exposito89@gmail.com

drm/plane: Make format_mod_supported truly optional

The documentation for "drm_plane_funcs.format_mod_supported" reads:

  This *optional* hook is used for the DRM to determine if the given
  format/modifier combination is valid for the plane. This allows the
  DRM to generate the correct format bitmask (which formats apply to
  which modifier), and to validate modifiers at atomic_check time.

  *If not present*, then any modifier in the plane's modifier
  list is allowed with any of the plane's formats.

However, where the function is not present, an invalid IN_FORMATS blob
property with modifiers but no formats is exposed to user-space.

This breaks the latest Weston [1]. For testing purposes, I extracted the
affected code to a standalone program [2].

Make "create_in_format_blob" behave as documented.

[1] https://gitlab.freedesktop.org/wayland/weston/-/blob/9.0/libweston/backend-drm/kms.c#L431
[2] https://github.com/JoseExposito/drm-sandbox/blob/main/in_formats.c

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20211226112503.31771-2-jose.exposito89@gmail.com

drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probe

The pm_runtime_enable will increase power disable depth.
Thus a pairing decrement is needed on the error handling
path to keep it balanced according to context.

Fixes: 44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220105104826.1418-1-linmq006@gmail.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probe

If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for __dw_mipi_dsi_probe.

Fixes: 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220105104113.31415-1-linmq006@gmail.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: parade-ps8640: Link device to ensure suspend/resume order

Entering suspend while the display attached to this bridge is still on
makes the resume sequence to resume the bridge first, display last:
when this happens, we get a timeout while resuming the bridge, as its
MCU will get stuck due to the display being unpowered.

On the other hand, on mt8173-elm, closing the lid makes the display to
get powered off first, bridge last, so at resume time the sequence is
swapped (compared to the first example) and everything just works
as expected.

Add a stateless device link to the DRM device that this bridge belongs
to, ensuring a correct resume sequence and solving the unability to
correctly resume bridge operation in the first mentioned example.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220105090802.73564-1-angelogioacchino.delregno@collabora.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm: exynos: dsi: Add mode_set function

Get the display mode settings via mode_set bridge function
instead of explicitly de-reference.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122070633.89219-3-jagan@amarulasolutions.com

drm: exynos: dsi: Convert to bridge driver

Some display panels would come up with a non-DSI output, those
can have an option to connect the DSI host by means of interface
bridge converter.

This DSI to non-DSI interface bridge converter would requires
DSI Host to handle drm bridge functionalities in order to DSI
Host to Interface bridge.

This patch convert the existing to a drm bridge driver with a
built-in encoder support for compatibility with existing
component drivers.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211122070633.89219-2-jagan@amarulasolutions.com

drm/bridge: anx7625: Fix null vs IS_ERR() checking in anx7625_register_i2c_dummy_clients

Since i2c_new_client_device() function return error pointers.
The i2c_new_dummy_device() function does not return NULL, It returns error
pointers too. Using IS_ERR() to check the return value to fix this.

Fixes: 8bdfc5dae4e3("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211222083350.18514-1-linmq006@gmail.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: anx7625: Check GPIO description to avoid crash

As GPIO probe function "devm_gpiod_get_optional()" may return error
code, driver should identify GPIO desc as NULL to avoid crash.

Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119015804.3824027-1-xji@analogixsemi.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/stm: ltdc: support of new hardware version

Add support of new hardware version 0x40100.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Tested-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211203085618.11314-1-yannick.fertre@foss.st.com

drm/stm: remove conflicting framebuffers

In case of using simplefb or another conflicting framebuffer,
call drm_aperture_remove_framebuffers() to remove memory allocated.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206134735.13537-1-yannick.fertre@foss.st.com

drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev

rc_dev is allocated by rc_allocate_device(), and doesn't assigned to
ctx->rc_dev before calling  rc_free_device(ctx->rc_dev).
So it should call rc_free_device(rc_dev);

Fixes: e25f1f7c94e1 ("drm/bridge/sii8620: add remote control support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211227092522.21755-1-linmq006@gmail.com

drm/bridge: chipone-icn6211: Add mode_set API

Get the display mode settings via mode_set bridge
function instead of explicitly de-reference.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119145325.1775046-2-jagan@amarulasolutions.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>

drm/bridge: chipone-icn6211: Switch to atomic operations

Replace atomic version of the pre_enable/enable/post_disable
operations to continue the transition to the atomic API.

Also added default drm atomic operations for duplicate, destroy
and reset state API's in order to have smooth transition on
atomic API's.

Tested on Allwinner R16/R40 DSI.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119145325.1775046-1-jagan@amarulasolutions.com

drm/stm: dsi: provide the implementation of mode_valid()

The dsi has several constraints on the video modes it can support,
mainly due to the frequencies that can be generated by the PLL
integrated in the DSI device.

Verify that the required HS clock can be generated by the PLL.

The dsi clock from the dsi PLL and the ltdc pixel clock are
asynchronous. The dsi needs to return in LP mode during HFP or HBP
to re-synchronize at each video line.

Verify that the duration of HFP and HBP allows the dsi to enter in
LP mode.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211218215055.212421-3-antonio.borneo@foss.st.com

drm/bridge/synopsys: dsi: extend the prototype of mode_valid()

To evaluate the validity of a video mode, some additional internal
value has to be passed to the platform implementation.

Extend the prototype of mode_valid().

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211218215055.212421-2-antonio.borneo@foss.st.com

drm/stm: dsi: move lane capability detection in probe()

There is no need to re-compute the dsi lane capability because it
only depends on dsi hw version.
Since dsi hw version is detected at probe(), move there also the
assignment of dsi lane capability.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Acked-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211218215055.212421-1-antonio.borneo@foss.st.com

drm/meson: Fix error handling when afbcd.ops->init fails

When afbcd.ops->init fails we need to free the struct drm_device. Also
all errors which come after afbcd.ops->init was successful need to exit
the AFBCD, just like meson_drv_unbind() does.

Fixes: d1b5e41e13a7e9 ("drm/meson: Add AFBCD module driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230235515.1627522-3-martin.blumenstingl@googlemail.com

drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops

Use this to simplify the driver shutdown. It will also come handy when
fixing the error handling in meson_drv_bind_master().

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Fixes: d1b5e41e13a7e9 ("drm/meson: Add AFBCD module driver")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230235515.1627522-2-martin.blumenstingl@googlemail.com

drm/bridge: sn65dsi83: Fix an error handling path in sn65dsi83_probe()

sn65dsi83_parse_dt() takes a reference on 'ctx->host_node' that must be
released in the error handling path of this function and of the probe.
This is only done in the remove function up to now.

Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/4bc21aed4b60d3d5ac4b28d8b07a6fdd8da6a536.1640768126.git.christophe.jaillet@wanadoo.fr

drm/dbi: Use a static inline stub for mipi_dbi_debugfs_init()

Replace the slightly odd "#define <function> NULL" thing with
a standard static inline stub.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211221193754.12287-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/bridge: ti-sn65dsi83: Add vcc supply regulator support

VCC needs to be enabled before releasing the enable GPIO.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213133626.2498056-5-alexander.stein@ew.tq-group.com

dt-bindings: drm/bridge: ti-sn65dsi83: Add vcc supply bindings

Add a VCC regulator which needs to be enabled before the EN pin is
released.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213133626.2498056-4-alexander.stein@ew.tq-group.com