Chris Wilson [Wed, 20 Jan 2021 12:17:18 +0000 (12:17 +0000)]
drm/i915/gt: Skip over completed active execlists, again
Now that we are careful to always force-restore contexts upon rewinding
(where necessary), we can restore our optimisation to skip over
completed active execlists when dequeuing.
Referenecs:
35f3fd8182ba ("drm/i915/execlists: Workaround switching back to a completed context")
References:
8ab3a3812aa9 ("drm/i915/gt: Incrementally check for rewinding")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120121718.26435-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 20 Jan 2021 12:17:17 +0000 (12:17 +0000)]
drm/i915/gt: Do not suspend bonded requests if one hangs
Treat the dependency between bonded requests as weak and leave the
remainder of the pair on the GPU if one hangs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120121718.26435-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 21:43:36 +0000 (21:43 +0000)]
drm/i915/gem: Drop lru bumping on display unpinning
Simplify the frontbuffer unpin by removing the lock requirement. The LRU
bumping was primarily to protect the GTT from being evicted and from
frontbuffers being eagerly shrunk. Now we protect frontbuffers from the
shrinker, and we avoid accidentally evicting from the GTT, so the
benefit from bumping LRU is no more, and we can save more time by not.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-6-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 21:43:35 +0000 (21:43 +0000)]
drm/i915/gem: Protect used framebuffers from casual eviction
In the shrinker, we protect framebuffers from light reclaim as we
typically expect framebuffers to be reused in the near future (and with
low latency requirements). We can apply the same logic to the GGTT
eviction and defer framebuffers to the second pass only used if the
caller is desperate enough to wait for space to become available.
In most cases, the caller will use a smaller partial vma instead of
trying to force the object into the GGTT if doing so will cause other
users to be evicted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-5-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 21:43:34 +0000 (21:43 +0000)]
drm/i915/gem: Use shrinkable status for unknown swizzle quirks
Give obj->mm.quirked a name much more reflective of its purpose
(i915_gem_object_has_tiling_quirk) and move it from the obj->mm field as
it doesn't denote a quirk of the backing store, but a quirk in the
object in its treatment of the backing pages, similar to tiling modes.
Then instead of abusing the pinned status of the buffer to protect it
from the shrinker, we can instead hide the buffer from the shrinker so
it is never considered for being swapped.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-4-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 21:43:33 +0000 (21:43 +0000)]
drm/i915/gem: Move stolen node into GEM object union
The obj->stolen is currently used to identify an object allocated from
stolen memory. This dates back to when there were just 1.5 types of
objects, an object backed by shmemfs and an object backed by shmemfs
with a contiguous physical address. Now that we have several different
types of objects, we no longer want to treat stolen objects as a special
case.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-3-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 21:43:32 +0000 (21:43 +0000)]
drm/i915/gem: Almagamate clflushes on freeze
When flushing objects larger than the CPU cache it is preferrable to use
a single wbinvd() rather than overlapping clflush(). At runtime, we
avoid wbinvd() due to its system-wide latencies, but during
singlethreaded suspend, no one will observe the imposed latency and we
can opt for the faster wbinvd to clear all objects in a single hit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 21:43:31 +0000 (21:43 +0000)]
drm/i915/gem: Almagamate clflushes on suspend
When flushing objects larger than the CPU cache it is preferrable to use
a single wbinvd() rather than overlapping clflush(). At runtime, we
avoid wbinvd() due to its system-wide latencies, but during
singlethreaded suspend, no one will observe the imposed latency and we
can opt for the faster wbinvd to clear all objects in a single hit.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119214336.1463-1-chris@chris-wilson.co.uk
Matthew Auld [Wed, 20 Jan 2021 10:47:14 +0000 (10:47 +0000)]
drm/i915/region: don't leak the object on error
Sanity check the object size before allocating a new gem object.
Fixes:
97d553963250 ("drm/i915/region: convert object_create into object_init")
Testcase: igt/gem_create/create-massive
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120104714.112812-1-matthew.auld@intel.com
John Harrison [Wed, 13 Jan 2021 22:07:24 +0000 (14:07 -0800)]
drm/i915/uc: Add function to define defaults for GuC/HuC enable
There is a module parameter for controlling what GuC/HuC features are
enabled. Setting to -1 means 'use the default'. However, the default
was not well defined, out of date and needs to be different across
platforms.
The default is now to disable both GuC and HuC on legacy platforms
where legacy means TGL/RKL and anything prior to Gen12. For new
platforms, the default is to load HuC but not enable GuC submission
as that has not landed yet.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113220724.2484897-1-John.C.Harrison@Intel.com
Chris Wilson [Tue, 19 Jan 2021 16:20:57 +0000 (16:20 +0000)]
drm/i915/gt: Close race between enable_breadcrumbs and cancel_breadcrumbs
If we enable_breadcrumbs for a request while that request is being
removed from HW; we may see that the request is active as we take the
ce->signal_lock and proceed to attach the request to ce->signals.
However, during unsubmission after marking the request as inactive, we
see that the request has not yet been added to ce->signals and so skip
the removal. Pull the check during cancel_breadcrumbs under the same
spinlock as enabling so that we the two tests are consistent in
enable/cancel.
Otherwise, we may insert a request onto ce->signals that we expect should
not be there:
intel_context_remove_breadcrumbs:488 GEM_BUG_ON(!__i915_request_is_complete(rq))
While updating, we can note that we are always called with
irqs-disabled, due to the engine->active.lock being held at the single
caller, and so remove the irqsave/restore making it symmetric to
enable_breadcrumbs.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2931
Fixes:
c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.10+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119162057.31097-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 20:44:54 +0000 (20:44 +0000)]
drm/i915/display: Apply interactive priority to explicit flip fences
Currently, if a modeset/pageflip needs to wait for render completion to
an object, we boost the priority of that rendering above all other work.
We can apply the same interactive priority boosting to explicit fences
that we can unwrap into a native i915_request (i.e. sync_file).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119204454.10343-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 14:49:11 +0000 (14:49 +0000)]
drm/i915/gem: Make i915_gem_object_flush_write_domain() static
flush_write_domain() is only used within the GEM domain management code,
so move it to i915_gem_domain.c and drop the export.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119144912.12653-5-chris@chris-wilson.co.uk
Matthew Auld [Tue, 19 Jan 2021 13:31:06 +0000 (13:31 +0000)]
drm/i915/pool: constrain pool objects by mapping type
In a few places we always end up mapping the pool object with the FORCE
constraint(to prevent hitting -EBUSY) which will destroy the cached
mapping if it has a different type. As a simple first step, make the
mapping type part of the pool interface, where the behaviour is to only
give out pool objects which match the requested mapping type.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119133106.66294-4-matthew.auld@intel.com
Matthew Auld [Tue, 19 Jan 2021 13:31:05 +0000 (13:31 +0000)]
drm/i915: move i915_map_type into i915_gem_object_types.h
Looks like it belongs there anyway, otherwise we have to include the
entirety of i915_gem_object.h just to get at the enum.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119133106.66294-3-matthew.auld@intel.com
CQ Tang [Tue, 19 Jan 2021 13:31:04 +0000 (13:31 +0000)]
drm/i915/error: Fix object page offset within a region
io_mapping_map_wc() expects the offset to be relative to the iomapping
base address. Currently we just pass in the physical address for the
page which only works if the region.start starts at zero.
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119133106.66294-2-matthew.auld@intel.com
Kui Wen [Tue, 19 Jan 2021 13:31:03 +0000 (13:31 +0000)]
drm/i915: Fix the sgt.pfn sanity check
For the device local-memory case, sgt.pfn will always be equal to zero,
since we instead use sgt.dma. Also, for device local-memory it is
perfectly valid for it to start from zero anyway, so no need to add a
new check for that either.
Signed-off-by: Kui Wen <kui.wen@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119133106.66294-1-matthew.auld@intel.com
Chris Wilson [Mon, 18 Jan 2021 11:08:54 +0000 (11:08 +0000)]
drm/i915/gem: Remove per-client stats from debugfs/i915_gem_objects
Rather than trying to avoid the use-after-free possible with the current
context chasing, simply remove presentation of the per-client stats from
debugfs. While we know from bug reports that this debugfs/i915_gem_objects
has been used by chromeos (and chrome itself) for debug purposes, google
suggests that it is unparsed, so we are free to invoke debugfs is not
ABI and remove details from it.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118110854.1873-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 11:08:02 +0000 (11:08 +0000)]
drm/i915: Mark per-engine-reset as supported on gen7
The benefit of only resetting a single engine is that we leave other
streams of userspace work intact across a hang; vital for process
isolation. We had wired up individual engine resets for gen6, but only
enabled it from gen8; now let's turn it on for the forgotten gen7. gen6
is still a mystery as how to unravel some global state that appears to
be reset along with an engine (in particular the ppgtt enabling in
GFX_MODE).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119110802.22228-6-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 11:08:01 +0000 (11:08 +0000)]
drm/i915/gt: Pull ring submission resume under its caller forcewake
Take advantage of calling xcs_resume under a forcewake by using direct
mmio access. In particular, we can avoid the sleeping variants to allow
resume to be called from softirq context, required for engine resets.
v2: Keep the posting read at the start of resume as a guardian memory
barrier.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119110802.22228-5-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 11:08:00 +0000 (11:08 +0000)]
drm/i915/gt: Disable the ring before resetting HEAD/TAIL
During the reset of ring submission, we first stop the engine by
clearing the HEAD/TAIL and marking the ring as disabled. However, it
would be safer to disable the ring (after emptying) before resetting the
HEAD/TAIL.
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119110802.22228-4-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 11:07:59 +0000 (11:07 +0000)]
drm/i915/gt: Lift stop_ring() to reset_prepare
Push the sleeping stop_ring() out of the reset resume function to reset
prepare; we are not allowed to sleep in the former.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119110802.22228-3-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 11:07:58 +0000 (11:07 +0000)]
drm/i915/selftests: Prepare the selftests for engine resets with ring submission
The engine resets selftests kick the tasklets, safe up until now as only
execlists supported engine resets.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119110802.22228-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 19 Jan 2021 11:07:57 +0000 (11:07 +0000)]
drm/i915/gt: One more flush for Baytrail clear residuals
CI reports that Baytail requires one more invalidate after CACHE_MODE
for it to be happy.
Fixes:
ace44e13e577 ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119110802.22228-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 14 Jan 2021 11:34:34 +0000 (11:34 +0000)]
drm/i915: Make GEM errors non-fatal by default
While immensely convenient for developing to only tackle the first
error, and not be flooded by repeated or secondiary issues, many more
casual testers are not setup to remotely capture debug traces. For those
testers, it is more beneficial to keep the system running in the remote
chance that they are able to extract the original debug logs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114113434.8229-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 14 Jan 2021 11:34:33 +0000 (11:34 +0000)]
drm/i915: Add DEBUG_GEM to the recommended CI config
Now that i915 compiles cleanly with Werror, we can enforce enabling
DEBUG_GEM when selecting the default debug config.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114113434.8229-1-chris@chris-wilson.co.uk
Chris Wilson [Sun, 17 Jan 2021 11:04:18 +0000 (11:04 +0000)]
drm/i915/gt: Add arbitration check before semaphore wait
Similar to commit
49b20dbf7497 ("drm/i915/gt: Perform an arbitration
check before busywaiting"), also add a check prior to the busywait
on gen8+, as we have now seen (because we added a selftest to add fault
injection into the engine resets) the same engine reset failure leading
to an indefinite wait on the ring-stop semaphore. So not a Tigerlake
specific bug after all, though it still seems odd behaviour for the
busywait as we do get the arbitration point elsewhere on a miss.
Testcase: igt_reset_fail_engine
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210117110418.3361-1-chris@chris-wilson.co.uk
Chris Wilson [Sun, 17 Jan 2021 09:30:15 +0000 (09:30 +0000)]
drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
Since we do a bare context switch with no restore, the clear residual
kernel runs on dirty state, and we must be careful to avoid executing
with bad state from context registers inherited from a malicious client.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2955
Fixes:
008ead6ef8f5 ("drm/i915/gt: Restore clear-residual mitigations for Ivybridge, Baytrail")
Fixes:
09aa9e45863e ("drm/i915/gt: Restore clear-residual mitigations for Ivybridge, Baytrail")
Testcase: igt/gem_ctx_isolation # ivb,vlv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210117093015.29143-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 15 Jan 2021 14:23:29 +0000 (14:23 +0000)]
drm/i915/gt: Convert stats.active to plain unsigned int
As context-in/out is now always serialised, we do not have to worry
about concurrent enabling/disable of the busy-stats and can reduce the
atomic_t active to a plain unsigned int, and the seqlock to a seqcount.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115142331.24458-3-chris@chris-wilson.co.uk
Chris Wilson [Fri, 15 Jan 2021 14:23:28 +0000 (14:23 +0000)]
drm/i915/gt: Extract busy-stats for ring-scheduler
Lift the busy-stats context-in/out implementation out of intel_lrc, so
that we can reuse it for other scheduler implementations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115142331.24458-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 15 Jan 2021 14:23:27 +0000 (14:23 +0000)]
drm/i915/gt: Drop atomic for engine->fw_active tracking
Since schedule-in/out is now entirely serialised by the tasklet bitlock,
we do not need to worry about concurrent in/out operations and so reduce
the atomic operations to plain instructions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115142331.24458-1-chris@chris-wilson.co.uk
Matthew Auld [Fri, 15 Jan 2021 10:13:29 +0000 (10:13 +0000)]
drm/i915: add back static declaration
warning: symbol '__i915_gem_object_create_stolen' was not declared. Should it be static?
warning: symbol '_i915_gem_object_stolen_init' was not declared. Should it be static?
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115101329.880667-1-matthew.auld@intel.com
Matthew Auld [Thu, 14 Jan 2021 18:24:02 +0000 (18:24 +0000)]
drm/i915/region: convert object_create into object_init
Give more flexibility to the caller, if they already have an allocated
object, in case they wish to apply some transformation to the object
prior to handing it over to the region specific initialisation step,
like in gem_create_ext where we would like to first apply the extensions
to the object.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114182402.840247-3-matthew.auld@intel.com
Matthew Auld [Thu, 14 Jan 2021 18:24:01 +0000 (18:24 +0000)]
drm/i915/gem: sanity check object size in gem_create
Depending on the regions min_page_size we might need to adjust the
object size, ensure this matches our expectations.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114182402.840247-2-matthew.auld@intel.com
Matthew Auld [Thu, 14 Jan 2021 18:24:00 +0000 (18:24 +0000)]
drm/i915/gem: split gem_create into own file
In preparation for gem_create_ext break out the gem_create uAPI, so that
we don't clutter i915_gem.c once we start adding various extensions
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114182402.840247-1-matthew.auld@intel.com
Chris Wilson [Thu, 14 Jan 2021 13:56:12 +0000 (13:56 +0000)]
drm/i915: Reduce test_and_set_bit to set_bit in i915_request_submit()
Avoid the full blown memory barrier of test_and_set_bit() by noting the
completed request and removing it from the lists.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114135612.13210-5-chris@chris-wilson.co.uk
Chris Wilson [Thu, 14 Jan 2021 13:56:11 +0000 (13:56 +0000)]
drm/i915/gem: Reduce ctx->engines_mutex for get_engines()
Take a snapshot of the ctx->engines, so we can avoid taking the
ctx->engines_mutex for a mere read in get_engines().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114135612.13210-4-chris@chris-wilson.co.uk
Chris Wilson [Thu, 14 Jan 2021 13:56:10 +0000 (13:56 +0000)]
drm/i915/gem: Reduce ctx->engine_mutex for reading the clone source
When cloning the engines from the source context, we need to ensure that
the engines are not freed as we copy them, and that the flags we clone
from the source correspond with the engines we copy across. To do this
we need only take a reference to the src->engines, rather than hold the
src->engine_mutex, so long as we verify that nothing changed under the
read.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114135612.13210-3-chris@chris-wilson.co.uk
Chris Wilson [Thu, 14 Jan 2021 13:56:09 +0000 (13:56 +0000)]
drm/i915: Drop i915_request.lock serialisation around await_start
Originally, we used the signal->lock as a means of following the
previous link in its timeline and peeking at the previous fence.
However, we have replaced the explicit serialisation with a series of
very careful probes that anticipate the links being deleted and the
fences recycled before we are able to acquire a strong reference to it.
We do not need the signal->lock crutch anymore, nor want the contention.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114135612.13210-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 14 Jan 2021 13:56:08 +0000 (13:56 +0000)]
drm/i915: Mark up protected uses of 'i915_request_completed'
When we know that we are inside the timeline mutex, or inside the
submission flow (under active.lock or the holder's rcu lock), we know
that the rq->hwsp is stable and we can use the simpler direct version.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114135612.13210-1-chris@chris-wilson.co.uk
Joonas Lahtinen [Fri, 15 Jan 2021 06:49:57 +0000 (08:49 +0200)]
Merge drm/drm-next into drm-intel-gt-next
Backmerging to get a common base for merging topic branches between
drm-intel-next and drm-intel-gt-next.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dave Airlie [Fri, 15 Jan 2021 05:03:36 +0000 (15:03 +1000)]
Merge tag 'drm-intel-gt-next-2021-01-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Deprecate I915_PMU_LAST and optimize state tracking (Tvrtko)
Avoid relying on last item ABI marker in i915_drm.h, add a
comment to mark as deprecated.
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- Restore clear residuals security mitigations for Ivybridge and
Baytrail (Chris)
- Close #1858: Allow sysadmin to choose applied GPU security mitigations
through i915.mitigations=... similar to CPU (Chris)
- Fix for #2024: GPU hangs on HSW GT1 (Chris)
- Fix for #2707: Driver hang when editing UVs in Blender (Chris, Ville)
- Fix for #2797: False positive GuC loading error message (Chris)
- Fix for #2859: Missing GuC firmware for older Cometlakes (Chris)
- Lessen probability of GPU hang due to DMAR faults [reason 7,
next page table ptr is invalid] on Tigerlake (Chris)
- Fix REVID macros for TGL to fetch correct stepping (Aditya)
- Limit frequency drop to RPe on parking (Chris, Edward)
- Limit W/A
1406941453 to TGL, RKL and DG1 (Swathi)
- Make W/A
22010271021 permanent on DG1 (Lucas)
- Implement W/A
16011163337 to prevent a HS/DS hang on DG1 (Swathi)
- Only disable preemption on gen8 render engines (Chris)
- Disable arbitration around Braswell's PDP updates (Chris)
- Disable arbitration on no-preempt requests (Chris)
- Check for arbitration after writing start seqno before busywaiting (Chris)
- Retain default context state across shrinking (Venkata, CQ)
- Fix mismatch between misplaced vma check and vma insert for 32-bit
addressing userspaces (Chris, CQ)
- Propagate error for vmap() failure instead kernel NULL deref (Chris)
- Propagate error from cancelled submit due to context closure
immediately (Chris)
- Fix RCU race on HWSP tracking per request (Chris)
- Clear CMD parser shadow and GPU reloc batches (Matt A)
- Populate logical context during first pin (Maarten)
- Optimistically prune dma-resv from the shrinker (Chris)
- Fix for virtual engine ownership race (Chris)
- Remove timeslice suppression to restore fairness for virtual engines (Chris)
- Rearrange IVB/HSW workarounds properly between GT and engine (Chris)
- Taint the reset mutex with the shrinker (Chris)
- Replace direct submit with direct call to tasklet (Chris)
- Multiple corrections to virtual engine dequeue and breadcrumbs code (Chris)
- Avoid wakeref from potentially hard IRQ context in PMU (Tvrtko)
- Use raw clock for RC6 time estimation in PMU (Tvrtko)
- Differentiate OOM failures from invalid map types (Chris)
- Fix Gen9 to have 64 MOCS entries similar to Gen11 (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Remove livelock from "do_idle_maps" VT-d W/A (Chris)
- Cancel the preemption timeout early in case engine reset fails (Chris)
- Code flow optimization in the scheduling code (Chris)
- Clear the execlists timers upon reset (Chris)
- Drain the breadcrumbs just once (Chris, Matt A)
- Track the overall GT awake/busy time (Chris)
- Tweak submission tasklet flushing to avoid starvation (Chris)
- Track timelines created using the HWSP to restore on resume (Chris)
- Use cmpxchg64 for 32b compatilibity for active tracking (Chris)
- Prefer recycling an idle GGTT fence to avoid GPU wait (Chris)
- Restructure GT code organization for clearer split between GuC
and execlists (Chris, Daniele, John, Matt A)
- Remove GuC code that will remain unused by new interfaces (Matt B)
- Restructure the CS timestamp clocks code to local to GT (Chris)
- Fix error return paths in perf code (Zhang)
- Replace idr_init() by idr_init_base() in perf (Deepak)
- Fix shmem_pin_map error path (Colin)
- Drop redundant free_work worker for GEM contexts (Chris, Mika)
- Increase readability and understandability of intel_workarounds.c (Lucas)
- Defer enabling the breadcrumb interrupt to after submission (Chris)
- Deal with buddy alloc block sizes beyond 4G (Venkata, Chris)
- Encode fence specific waitqueue behaviour into the wait.flags (Chris)
- Don't cancel the breadcrumb interrupt shadow too early (Chris)
- Cancel submitted requests upon context reset (Chris)
- Use correct locks in GuC code (Tvrtko)
- Prevent use of engine->wa_ctx after error (Chris, Matt R)
- Fix build warning on 32-bit (Arnd)
- Avoid memory leak if platform would have more than 16 W/A (Tvrtko)
- Avoid unnecessary #if CONFIG_PM in PMU code (Chris, Tvrtko)
- Improve debugging output (Chris, Tvrtko, Matt R)
- Make file local variables static (Jani)
- Avoid uint*_t types in i915 (Jani)
- Selftest improvements (Chris, Matt A, Dan)
- Documentation fixes (Chris, Jose)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
# drivers/gpu/drm/i915/gt/intel_breadcrumbs_types.h
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/gvt/mmio_context.h
# drivers/gpu/drm/i915/i915_drv.h
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114152232.GA21588@jlahtine-mobl.ger.corp.intel.com
Dave Airlie [Fri, 15 Jan 2021 03:41:32 +0000 (13:41 +1000)]
Merge tag 'drm-intel-next-2021-01-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- PSR fixes and improvements for selective fetch (Jose)
- GVT build fixed and cleanup (Jani)
- RKL display fixes (Lee, Matt)
- DSI fix (Hans)
- Panel Power and Backlight fixes (Anshuman, Jani)
- RPM fix (Chris)
- Fix HTI port checking (Jose)
- Clean-up in cursor code (Ville)
- Once again, trying to use fast+narrow link on eDP (Ville)
- DG1 display fix (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112175151.GA90999@intel.com
Dave Airlie [Thu, 14 Jan 2021 23:05:23 +0000 (09:05 +1000)]
Merge tag 'amd-drm-next-5.12-2021-01-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-5.12-2021-01-08:
amdgpu:
- Rework IH ring handling on vega and navi
- Rework HDP handling for vega and navi
- swSMU documenation updates
- Overdrive support for Sienna Cichlid and newer asics
- swSMU updates for vangogh
- swSMU updates for renoir
- Enable FP16 on DCE8-11
- Misc code cleanups and bug fixes
radeon:
- Fixes for platforms that can't access PCI resources correctly
- Misc code cleanups
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108221811.3868-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Chris Wilson [Wed, 13 Jan 2021 15:22:24 +0000 (15:22 +0000)]
drm/i915/gt: Prune inlines
Remove all the manual inlines from non-critical sections in gt/
add/remove: 2/0 grow/shrink: 0/3 up/down: 762/-1473 (-711)
Function old new delta
mi_set_context.isra - 602 +602
write_dma_entry - 160 +160
__set_pd_entry 214 69 -145
clear_pd_entry 190 42 -148
ring_request_alloc 2021 841 -1180
Total: Before=1605086, After=1604375, chg -0.04%
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113152224.29794-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 13 Jan 2021 15:11:12 +0000 (15:11 +0000)]
drm/i915/gt: Prune 'inline' from execlists
Remove the extraneous inlines. The only split by the compiler that
looked dubious was execlists_schedule_out, so push the code around
slightly to move all the work into the out-of-line function.
In a normal build, bloat-o-meter shows that only the
execlists_schedule_out is contentious:
add/remove: 1/0 grow/shrink: 0/2 up/down: 803/-1532 (-729)
Function old new delta
__execlists_schedule_out - 803 +803
execlists_submission_tasklet 6488 5766 -722
execlists_reset_csb.constprop 1587 777 -810
Total: Before=1605815, After=1605086, chg -0.05%
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113151112.15212-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 14 Jan 2021 10:14:51 +0000 (10:14 +0000)]
drm/i915/gt: Reapply ppgtt enabling after engine resets
The GFX_MODE is reset along with the engine, turning off ppGTT. We need
to re-enable it upon resume afterwards.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114101451.24762-1-chris@chris-wilson.co.uk
Jani Nikula [Wed, 13 Jan 2021 14:13:17 +0000 (16:13 +0200)]
drm/i915/selftests: fix the uint*_t types that have crept in
Always prefer the kernel types over stdint types in i915.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113141317.30765-1-jani.nikula@intel.com
Chris Wilson [Wed, 13 Jan 2021 22:51:44 +0000 (22:51 +0000)]
drm/i915/gt: Rearrange ivb workarounds
Some rcs0 workarounds were being incorrectly applied to the GT, and so
we failed to restore the expected register settings after a reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113225144.30810-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 13 Jan 2021 22:51:43 +0000 (22:51 +0000)]
drm/i915/gt: Rearrange vlv workarounds
Some rcs0 workarounds were being incorrectly applied to the GT, and so
we failed to restore the expected register settings after a reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113225144.30810-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 13 Jan 2021 20:47:09 +0000 (20:47 +0000)]
drm/i915/gt: Replace open-coded intel_engine_stop_cs()
In the legacy ringbuffer submission, we still had an open-coded version
of intel_engine_stop_cs() with one additional verification step. Transfer
that verification to intel_engine_stop_cs() itself, and call it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113204709.15020-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 13 Jan 2021 16:31:15 +0000 (16:31 +0000)]
drm/i915/selftests: Bump the scheduling error threshold for fast heartbeats
Since we are system_highpri_wq, we expected the heartbeat to be
scheduled promptly. However, we see delays of over 10ms upsetting our
assertions. Accept this as inevitable and bump the minimum error
threshold to 20ms (from 6 jiffies).
<6> [616.784749] rcs0: Heartbeat delay: 3570us [2802, 9188]
<6> [616.807790] bcs0: Heartbeat delay: 2111us [745, 4372]
<6> [616.853776] vcs0: Heartbeat delay: 6485us [2424, 11637]
<3> [616.859296] vcs0: Heartbeat delay was 6485us, expected less than 6000us
<3> [616.860901] i915/intel_heartbeat_live_selftests: live_heartbeat_fast failed with error -22
v2: More context from CI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113163115.5740-2-chris@chris-wilson.co.uk
Chris Wilson [Wed, 13 Jan 2021 20:50:49 +0000 (20:50 +0000)]
drm/i915/selftests: Force a failed engine reset
Inject a fault into the engine reset and check that the outstanding
requests are completed despite the failed reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113205049.22565-1-chris@chris-wilson.co.uk
Daniele Ceraolo Spurio [Wed, 13 Jan 2021 02:12:36 +0000 (18:12 -0800)]
drm/i915/guc: stop calling execlists_set_default_submission
Initialize all required entries from guc_set_default_submission, instead
of calling the execlists function. The previously inherited setup has
been copied over from the execlist code and simplified by removing the
execlists submission-specific parts.
v2: move setting of relative_mmio flag to engine_setup_common (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-5-daniele.ceraolospurio@intel.com
Daniele Ceraolo Spurio [Wed, 13 Jan 2021 02:12:35 +0000 (18:12 -0800)]
drm/i915/guc: init engine directly in GuC submission mode
Instead of starting the engine in execlists submission mode and then
switching to GuC, start directly in GuC submission mode. The initial
setup functions have been copied over from the execlists code
and simplified by removing the execlists submission-specific parts.
v2: remove unneeded unexpected starting state check (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-4-daniele.ceraolospurio@intel.com
Daniele Ceraolo Spurio [Wed, 13 Jan 2021 02:12:34 +0000 (18:12 -0800)]
drm/i915/guc: do not dump execlists state with GuC submission
GuC owns the execlists state and the context IDs used for submission, so
the status of the ports and the CSB entries are not something we control
or can decode from the i915 side, therefore we can avoid dumping it. A
follow-up patch will also stop setting the csb pointers when using GuC
submission.
GuC dumps all the required events in the GuC logs when verbosity is set
high enough.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-3-daniele.ceraolospurio@intel.com
Matthew Brost [Wed, 13 Jan 2021 02:12:33 +0000 (18:12 -0800)]
drm/i915/guc: Delete GuC code unused in future patches
Delete GuC code unused in future patches that rewrite the GuC interface
to work with the new firmware. Most of the code deleted relates to
workqueues or execlist port. The code is safe to remove because we still
don't allow GuC submission to be enabled, even when overriding the
modparam, so it currently can't be reached.
The defines + structs for the process descriptor and workqueue remain.
Although the new GuC interface does not require either of these for the
normal submission path multi-lrc submission does. The usage of the
process descriptor and workqueue for multi-lrc will be quite different
from the code that is deleted in this patch. A future patch will
implement multi-lrc submission.
v2: add a code in the commit message about the code being safe to
remove (Chris)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-2-daniele.ceraolospurio@intel.com
Matthew Auld [Tue, 12 Jan 2021 16:43:00 +0000 (16:43 +0000)]
drm/i915: move region_lmem under gt
Device local-memory should be thought of as part the GT, which means it
should also sit under gt/.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112164300.356524-1-matthew.auld@intel.com
Jani Nikula [Tue, 12 Jan 2021 17:22:46 +0000 (19:22 +0200)]
drm/i915/lmem: make intel_region_lmem_ops static
There are no users outside of intel_region_lmem.c.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112172246.11933-1-jani.nikula@intel.com
Jani Nikula [Tue, 12 Jan 2021 17:04:29 +0000 (19:04 +0200)]
drm/i915/region: make intel_region_map static
There are no users outside of intel_memory_region.c.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112170429.27619-1-jani.nikula@intel.com
Chris Wilson [Tue, 12 Jan 2021 10:07:59 +0000 (10:07 +0000)]
drm/i915/gt: Perform an arbitration check before busywaiting
During igt_reset_nop_engine, it was observed that an unexpected failed
engine reset lead to us busywaiting on the stop-ring semaphore (set
during the reset preparations) on the first request afterwards. There was
no explicit MI_ARB_CHECK in this sequence as the presumption was that
the failed MI_SEMAPHORE_WAIT would itself act as an arbitration point.
It did not in this circumstance, so force it.
This patch is based on the assumption that the MI_SEMAPHORE_WAIT failure
to arbitrate is a rare Tigerlake bug, similar to the lite-restore vs
semaphore issues previously seen in the CS. The explicit MI_ARB_CHECK
should always ensure that there is at least one arbitration point in the
request before the MI_SEMAPHORE_WAIT to trigger the IDLE->ACTIVE event.
Upon processing that event, we will clear the stop-ring flag and release
the semaphore from its busywait.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112100759.32698-2-chris@chris-wilson.co.uk
Chris Wilson [Tue, 12 Jan 2021 10:07:58 +0000 (10:07 +0000)]
drm/i915/gt: Check for arbitration after writing start seqno
On the off chance that we need to arbitrate before launching the
payload, perform the check after we signal the request is ready to
start. Assuming instantaneous processing of the CS event, the request
will then be treated as having started when we make the decisions as to
how to process that CS event.
v2: More commentary about the users of i915_request_started() as a
reminder about why we are marking the initial breadcrumb.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112100759.32698-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 12 Jan 2021 02:00:13 +0000 (02:00 +0000)]
drm/i915/selftests: Allow huge_gem_object to kick the shrinker
A new fi-cml-dallium CI machine has 8G and apparently plenty free, yet
fails some selftests with ENOMEM. The failures all seem to be from
huge_gem_object which does not try very hard to allocate memory,
skipping reclaim entirely. Let's try a bit harder and direct reclaim
before failing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112020013.19464-1-chris@chris-wilson.co.uk
Chris Wilson [Tue, 12 Jan 2021 01:50:00 +0000 (01:50 +0000)]
drm/i915/gem: Remove stolen node before releasing the region
If this stolen object holds the last reference to the region, we need to
remove our drm_mm_node before freeing the region's drm_mm.
<4> [431.679591] Memory manager not clean during takedown.
<4> [431.679633] WARNING: CPU: 0 PID: 110 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x51/0x100
<4> [431.679655] Modules linked in: i915 vgem btusb snd_hda_codec_hdmi btrtl btbcm btintel snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio bluetooth coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ecdh_generic ecc r8169 realtek lpc_ich snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm pinctrl_cherryview prime_numbers [last unloaded: i915]
<4> [431.679883] CPU: 0 PID: 110 Comm: kworker/u4:3 Tainted: G U 5.11.0-rc3-CI-CI_DRM_9583+ #1
<4> [431.679895] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0058.2016.1102.1842 11/02/2016
<4> [431.679905] Workqueue: i915 __i915_gem_free_work [i915]
<4> [431.680831] RIP: 0010:drm_mm_takedown+0x51/0x100
<4> [431.680850] Code: 44 24 08 65 48 33 04 25 28 00 00 00 0f 85 b6 00 00 00 48 83 c4 10 5b 5d 41 5c c3 48 89 fb 48 c7 c7 c8 b7 38 82 e8 00 d6 37 00 <0f> 0b 48 8b 3d 96 d5 d1 00 ba 00 10 00 00 be c0 0c 00 00 e8 d7 64
<4> [431.680862] RSP: 0018:
ffffc90000ad7dc0 EFLAGS:
00010282
<4> [431.680879] RAX:
0000000000000000 RBX:
ffff8881109aa140 RCX:
0000000000000001
<4> [431.680888] RDX:
0000000080000001 RSI:
ffffffff8235a70f RDI:
00000000ffffffff
<4> [431.680897] RBP:
ffff8881109aa178 R08:
0000000000000001 R09:
0000000000000001
<4> [431.680906] R10:
0000000025eaec48 R11:
00000000f5b271a7 R12:
ffff88810a38ddc0
<4> [431.680916] R13:
00000000ffffffff R14:
ffffffff82861b70 R15:
ffff88810b715538
<4> [431.680925] FS:
0000000000000000(0000) GS:
ffff88817b800000(0000) knlGS:
0000000000000000
<4> [431.680935] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [431.680945] CR2:
000056377cfd7c48 CR3:
00000001045de000 CR4:
00000000001006f0
<4> [431.680954] Call Trace:
<4> [431.680977] __intel_memory_region_destroy+0x24/0x50 [i915]
<4> [431.681340] i915_gem_object_release_stolen+0x26/0x40 [i915]
<4> [431.681637] __i915_gem_free_objects.isra.21+0x1ef/0x3b0 [i915]
<4> [431.681935] process_one_work+0x270/0x5c0
<4> [431.682022] worker_thread+0x37/0x380
<4> [431.682047] ? process_one_work+0x5c0/0x5c0
<4> [431.682062] kthread+0x146/0x170
<4> [431.682077] ? kthread_park+0x80/0x80
<4> [431.682098] ret_from_fork+0x22/0x30
<4> [431.682153] irq event stamp: 1872905
<4> [431.682162] hardirqs last enabled at (1872911): [<
ffffffff8112bd9a>] console_unlock+0x49a/0x580
<4> [431.682176] hardirqs last disabled at (1872916): [<
ffffffff8112bd06>] console_unlock+0x406/0x580
<4> [431.682187] softirqs last enabled at (1872850): [<
ffffffff81e00342>] __do_softirq+0x342/0x48e
<4> [431.682201] softirqs last disabled at (1872845): [<
ffffffff81c00f52>] asm_call_irq_on_stack+0x12/0x20
<4> [431.682214] ---[ end trace
5d3bcd818e2e3816 ]---
<3> [431.686188] [drm:drm_mm_takedown] *ERROR* node [
0002d000 +
00004000]: inserted at
drm_mm_insert_node_in_range+0x34a/0x5b0
i915_gem_stolen_insert_node_in_range+0x7b/0xa0 [i915]
_i915_gem_object_create_stolen+0x83/0xd0 [i915]
i915_gem_object_create_region+0x61/0x140 [i915]
intel_engine_create_ring+0x176/0x230 [i915]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2927
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112015000.16108-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 11 Jan 2021 22:52:20 +0000 (22:52 +0000)]
drm/i915: Allow the sysadmin to override security mitigations
The clear-residuals mitigation is a relatively heavy hammer and under some
circumstances the user may wish to forgo the context isolation in order
to meet some performance requirement. Introduce a generic module
parameter to allow selectively enabling/disabling different mitigations.
To disable just the clear-residuals mitigation (on Ivybridge, Baytrail,
or Haswell) use the module parameter: i915.mitigations=auto,!residuals
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858
Fixes:
47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk
Chris Wilson [Mon, 11 Jan 2021 22:52:19 +0000 (22:52 +0000)]
drm/i915/gt: Restore clear-residual mitigations for Ivybridge, Baytrail
The mitigation is required for all gen7 platforms, now that it does not
cause GPU hangs, restore it for Ivybridge and Baytrail.
Fixes:
47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-2-chris@chris-wilson.co.uk
Chris Wilson [Mon, 11 Jan 2021 22:52:18 +0000 (22:52 +0000)]
drm/i915/gt: Limit VFE threads based on GT
MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the
range [0, n-1] where n is #EU * (#threads/EU) with the number of threads
based on plaform and the number of EU based on the number of slices and
subslices. This is a fixed number per platform/gt, so appropriately
limit the number of threads we spawn to match the device.
v2: Oversaturate the system with tasks to force execution on every HW
thread; if the thread idles it is returned to the pool and may be reused
again before an unused thread.
v3: Fix more state commands, which was causing Baytrail to barf.
v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024
Fixes:
47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Randy Wright <rwright@hpe.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk
Matt Roper [Fri, 8 Jan 2021 22:25:28 +0000 (14:25 -0800)]
drm/i915/dg1: Update voltage swing tables for DP
DG1's vswing tables are the same for eDP and HDMI but have slight
differences from ICL/TGL for DP.
v2:
- Use a "_hbr2_hbr3" suffix on the table name to make it more clear
that the same table is used for both HBR2 and HBR3 link rates.
(Swathi)
Bspec: 49291
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108222528.1954514-1-matthew.d.roper@intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Chris Wilson [Mon, 11 Jan 2021 10:57:35 +0000 (10:57 +0000)]
drm/i915/selftests: Include engine name after reset failure
During igt_reset_nop_engine, an engine reset unexpectedly failed. For the
next time this happens, mention which engine that was.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111105735.21515-4-chris@chris-wilson.co.uk
Chris Wilson [Mon, 11 Jan 2021 10:57:32 +0000 (10:57 +0000)]
drm/i915/gt: Disable arbitration around Braswell's pdp updates
Braswell's pdp workaround is full of dragons, that may be being angered
when they are interrupted. Let's not take that risk and disable
arbitration during the update.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111105735.21515-1-chris@chris-wilson.co.uk
Ville Syrjälä [Thu, 7 Jan 2021 18:20:25 +0000 (20:20 +0200)]
drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure
Some new eDP panels don't like to operate at the max parameters, and
instead we need to go for an optimal confiugration. That unfortunately
doesn't work with older eDP panels which are generally only guaranteed
to work at the max parameters.
To solve these two conflicting requirements let's start with the optimal
setup, and if that fails we start again with the max parameters. The
downside is probably an extra modeset when we switch strategies but
I don't see a good way to avoid that.
For a bit of history we first tried to go for the fast+narrow in
commit
7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config
fast and narrow"). but that had to be reverted due to regression
on older panels in commit
f11cb1c19ad0 ("drm/i915/dp: revert back
to max link rate and lane count on eDP"). So now we try to get
the best of both worlds by using both strategies.
v2: Deal with output_bpp and uapi vs. hw state split
Reword some comments
v3: Rebase
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Cc: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Cc: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105267
References: https://bugs.freedesktop.org/show_bug.cgi?id=109959
References: https://gitlab.freedesktop.org/drm/intel/issues/272
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107182026.24848-1-ville.syrjala@linux.intel.com
Ville Syrjälä [Tue, 10 Nov 2020 17:56:24 +0000 (19:56 +0200)]
drm/i915: Fix checkpatch warns in cursor code
Eliminate checkpatch warnings from intel_cursor.c:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Possible repeated word: 'by'
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110175624.3524-2-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
José Roberto de Souza [Fri, 8 Jan 2021 13:48:02 +0000 (05:48 -0800)]
drm/i915: Fix HTI port checking
There was some misinterpretation of specification, when DDIX_USED is
set, the next bit means 0 for DP and 1 for HDMI.
Anyways this misinterpretation is not causing any issues, this change
is just to comply with specification.
Also as for us it do not matters if it is HDMI or DP, not checking the
port type that HTI is using.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108134802.21280-1-jose.souza@intel.com
Dan Carpenter [Mon, 11 Jan 2021 13:13:20 +0000 (13:13 +0000)]
drm/i915/selftests: Fix some error codes
These error paths return success instead of negative error codes as
intended.
Fixes:
c92724de6db1 ("drm/i915/selftests: Try to detect rollback during batchbuffer preemption")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/X/xMdcewtft7+QFM@mwanda
Jani Nikula [Fri, 8 Jan 2021 15:28:41 +0000 (17:28 +0200)]
drm/i915/backlight: fix CPU mode backlight takeover on LPT
The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.
The CPU mode takeover code added in commit
5b1ec9ac7ab5
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".
This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.
Fixes:
5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com
Chris Wilson [Sat, 9 Jan 2021 16:34:55 +0000 (16:34 +0000)]
drm/i915: Refactor marking a request as EIO
When wedging the device, we cancel all outstanding requests and mark
them as EIO. Rather than duplicate the small function to do so between
each submission backend, export one.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-3-chris@chris-wilson.co.uk
Chris Wilson [Sat, 9 Jan 2021 16:34:54 +0000 (16:34 +0000)]
drm/i915/gt: Mark up a debug-only function
drivers/gpu/drm/i915//gt/intel_workarounds.c:1394:20: error: function 'is_nonpriv_flags_valid' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static inline bool is_nonpriv_flags_valid(u32 flags)
This is only used by debug build, so mark it as maybe-unused to keep the
compiler from complaining.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-2-chris@chris-wilson.co.uk
Chris Wilson [Sat, 9 Jan 2021 16:34:53 +0000 (16:34 +0000)]
drm/i915/gt: Remove unused function 'dword_in_page'
>> drivers/gpu/drm/i915/gt/intel_lrc.c:17:28: error: unused function 'dword_in_page' [-Werror,-Wunused-function]
static inline unsigned int dword_in_page(void *addr)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-1-chris@chris-wilson.co.uk
Chris Wilson [Sat, 9 Jan 2021 11:44:53 +0000 (11:44 +0000)]
drm/i915/gt: Exercise lrc_wa_ctx initialisation failure
Inject a fault into lrc_init_wa_ctx() to ensure that we can tolerate a
failure to construct the workarounds.
v2: Avoid mentioning an error for fault-injection, other CI will
complain about the dmesg spam.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109114453.27798-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 8 Jan 2021 20:40:26 +0000 (20:40 +0000)]
drm/i915/gt: Disable arbitration on no-preempt requests
If a request is submitted and known to require no preemption, disable
arbitration around the batch which prevents the HW from handling a
preemption request during the payload.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-7-chris@chris-wilson.co.uk
Chris Wilson [Fri, 8 Jan 2021 20:40:25 +0000 (20:40 +0000)]
drm/i915/gt: Only disable preemption on gen8 render engines
The reason why we did not enable preemption on Broadwater was due to
missing GPGPU workarounds. Since this only applies to rcs0, only
restrict rcs0 (and our global capabilities).
While this does not affect exposing a preemption capability to
userspace, it does affect our internal decisions on whether to use
timeslicing and semaphores between individual engines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-6-chris@chris-wilson.co.uk
Chris Wilson [Fri, 8 Jan 2021 20:40:24 +0000 (20:40 +0000)]
drm/i915/gt: Only retire on the last breadcrumb if the last request
We use the completion of the last active breadcrumb to retire the
requests along a timeline. This is purely opportunistic as nothing
guarantees that any particular timeline is terminated by a breadcrumb;
except for parking the engine where we explicitly add a breadcrumb so
that we park quickly and do an explicit retire upon signaling to reduce
the latency dramatically (avoiding a retire worker roundtrip).
With scheduling, we anticipate retiring completed timelines as a matter
of course. Performing the same action from inside the breadcrumbs is
intended to provide similar functionality for legacy ringbuffer
submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-5-chris@chris-wilson.co.uk
Chris Wilson [Fri, 8 Jan 2021 20:40:23 +0000 (20:40 +0000)]
drm/i915/gt: Restore ce->signal flush before releasing virtual engine
Before we mark the virtual engine as no longer inflight, flush any
ongoing signaling that may be using the ce->signal_link along the
previous breadcrumbs. On switch to a new physical engine, that link will
be inserted into the new set of breadcrumbs, causing confusion to an
ongoing iterator.
This patch undoes a last minute mistake introduced into commit
bab0557c8dca ("drm/i915/gt: Remove virtual breadcrumb before transfer"),
whereby instead of unconditionally applying the flush, it was only
applied if the request itself was going to be reused.
v2: Generalise and cancel all remaining ce->signals
Fixes:
bab0557c8dca ("drm/i915/gt: Remove virtual breadcrumb before transfer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-4-chris@chris-wilson.co.uk
Chris Wilson [Fri, 8 Jan 2021 20:40:22 +0000 (20:40 +0000)]
drm/i915/selftests: Rearrange ktime_get to reduce latency against CS
In our tests where we measure the elapsed time on both the CPU and CS
using a udelay, our CS results match the udelay much more accurately
than the ktime (even when using ktime_get_fast_ns). With preemption
disabled, we can go one step lower than ktime and use local_clock.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2919
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-3-chris@chris-wilson.co.uk
Chris Wilson [Fri, 8 Jan 2021 20:40:21 +0000 (20:40 +0000)]
drm/i915/selftests: Skip unstable timing measurements
If any of the perf tests run into 0 time, not only are we liable to
divide by zero, but the result would be highly questionable.
Nevertheless, let's not have a div-by-zero error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-2-chris@chris-wilson.co.uk
Chris Wilson [Fri, 8 Jan 2021 20:40:20 +0000 (20:40 +0000)]
drm/i915/gt: Prevent use of engine->wa_ctx after error
On error we unpin and free the wa_ctx.vma, but do not clear any of the
derived flags. During lrc_init, we look at the flags and attempt to
dereference the wa_ctx.vma if they are set. To protect the error path
where we try to limp along without the wa_ctx, make sure we clear those
flags!
Reported-by: Matt Roper <matthew.d.roper@intel.com>
Fixes:
604a8f6f1e33 ("drm/i915/lrc: Only enable per-context and per-bb buffers if set")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 4 Jan 2021 20:39:05 +0000 (20:39 +0000)]
drm/i915: Disable RPM wakeref assertions during driver shutdown
As with the regular suspend paths, also disable the wakeref assertions
as we disable the driver during shutdown.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2899
Fixes:
fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104203905.19248-1-chris@chris-wilson.co.uk
Alexandre Demers [Thu, 7 Jan 2021 23:53:03 +0000 (18:53 -0500)]
drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921)
This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in
amdgpu_device_asic_has_dc_support(). This info should be only called once.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Alex Deucher [Fri, 8 Jan 2021 16:32:11 +0000 (11:32 -0500)]
drm/amdgpu/display: fix build with CONFIG_DRM_AMD_DC_DCN disabled
dc_allow_idle_optimizations() needs to be protected by
CONFIG_DRM_AMD_DC_DCN.
Fixes:
71338cb4a7c2 ("drm/amd/display: enable idle optimizations for linux (MALL stutter)")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaojian Du [Tue, 29 Dec 2020 10:32:11 +0000 (18:32 +0800)]
drm/amd/pm: modify the fine grain tuning function for Renoir
This patch is to improve the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
And the flag "od_enabled" is used to control the overdrive function for
dGPU, like navi10, navi14 and navi21.
APU like Renior or Vangogh uses this "od_enabled" to configure
the frequency range of gfx clock, but the max value of frequency
range will not be higher than the safe limit, it is not "overdrive".
So this patch adds two new flags -- "fine_grain_enabled" and
"fine_grain_started" to avoid this confusion, the flag will
make these two sysfs nodes work separately.
The flag "fine_grain_enabled" is set as "enabled" by default,
so the fine grain tuning function will be enabled by default.
But the flag "fine_grain_started" is set as "false" by default,
so the fine grain function will not take effect until it is set as
"true".
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag "fine_grain_started" will be set as "true",
and the fine grain tuning function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the flag "fine_grain_started" will be set as "false", and the od range of
fine grain tuning function will be restored default value.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaojian Du [Thu, 7 Jan 2021 06:34:10 +0000 (14:34 +0800)]
drm/amd/pm: add the parameters of power profiles for vangogh
This pacth is to add the parameters of power profiles for vangogh,
includeing "profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk".
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Zhao [Tue, 5 Jan 2021 07:04:01 +0000 (15:04 +0800)]
drm/amdgpu/psp: fix psp gfx ctrl cmds
psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux,
according to psp, linux cmds are not correct.
v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Wed, 6 Jan 2021 03:43:27 +0000 (11:43 +0800)]
drm/amdkfd: check more client ids in interrupt handler
Add check for SExSH clients in kfd interrupt handler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily.Deng [Tue, 5 Jan 2021 03:21:25 +0000 (11:21 +0800)]
drm/amdgpu: Correct the read sclk for navi10
According to hw, after navi10,it runs in dfll mode, and should
read sclk from AverageGfxclkFrequency.
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Emily.Deng [Fri, 11 Dec 2020 03:38:54 +0000 (11:38 +0800)]
drm/amdgpu: Add new mode 2560x1440
Add one more 2k resolution which appears frequently in market.
Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anshuman Gupta [Thu, 7 Jan 2021 11:25:00 +0000 (16:55 +0530)]
drm/i915/pps: Reuse POWER_DOMAIN_DISPLAY_CORE in pps_{lock, unlock}
We need a power_domain wakeref in pps_{lock,unlock} to prevent
a race while resetting pps state in intel_power_sequencer_reset().
intel_power_sequencer_reset() need a pps_mutex to access pps_pipe
but it can't grab pps_mutex due to deadlock with power_well
functions are called while holding pps_mutex.
intel_power_sequencer_reset() is called by power_well function
associated with legacy platforms like vlv and chv therefore re-use
the POWER_DOMAIN_DISPLAY_CORE power domain, which only used
by vlv and chv display power domain.
This will avoids the unnecessary noise of unrelated power wells
in pps_{lock,unlock}.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107112500.16216-1-anshuman.gupta@intel.com
Rodrigo Vivi [Fri, 8 Jan 2021 11:03:51 +0000 (06:03 -0500)]
Merge drm/drm-next into drm-intel-next
sync-up to not fall too much behind.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Thu, 7 Jan 2021 13:23:22 +0000 (13:23 +0000)]
drm/i915/gt: Remove timeslice suppression
In the next^W future patch, we remove the strict priority system and
continuously re-evaluate the relative priority of tasks. As such we need
to enable the timeslice whenever there is more than one context in the
pipeline. This simplifies the decision and removes some of the tweaks to
suppress timeslicing, allowing us to lift the timeslice enabling to a
common spot at the end of running the submission tasklet.
One consequence of the suppression is that it was reducing fairness
between virtual engines on an over saturated system; undermining the
principle for timeslicing.
v2: Commentary
v3: Commentary for the right cancel_timer()
v4: Add tracing for why we need a timeslice
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2802
Testcase: igt/gem_exec_balancer/fairslice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107132322.28373-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 7 Jan 2021 12:35:40 +0000 (12:35 +0000)]
drm/i915: Wrap our timer_list.expires checking
Refactor our timer_list.expires checking into its own timer_active()
helper.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107123541.17153-1-chris@chris-wilson.co.uk
Daniel Vetter [Thu, 7 Jan 2021 12:40:19 +0000 (13:40 +0100)]
Merge tag 'drm-misc-next-2021-01-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.12:
Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.
Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdfbfd7a-b91d-3f59-11c8-984704ce0ee1@linux.intel.com