Piotr Drąg [Mon, 8 Feb 2016 11:48:46 +0000 (12:48 +0100)]
po: update POTFILES
https://bugzilla.gnome.org/show_bug.cgi?id=761705
Luis de Bethencourt [Mon, 8 Feb 2016 15:31:55 +0000 (15:31 +0000)]
v4l2allocator: Fix spelling of reenqueueing
To match commit
7d7074cef0272cd5155098bfc2bda6849dd89267. I love the idea
of aiming for the maximum number of consecutive vowels.
Nicolas Dufresne [Mon, 8 Feb 2016 15:17:49 +0000 (10:17 -0500)]
v4l2allocator: Fix spelling of queueing
Didn't know which one to choose between queuing and queueing, so I picked
the one with the biggest amount of vowels in a row ;-P (both are
acceptable apparently)
Nicolas Dufresne [Sun, 7 Feb 2016 20:02:35 +0000 (15:02 -0500)]
jpegdec: Don't pass the same data over and over
We already pass the entire frame to the decoder. If the decoder ask for
more data, don't pass the same data again as this leads to infinit loop.
Instead, simply fail the fill function to signal the problem with that
frame. It will then be skipped properly.
https://bugzilla.gnome.org/show_bug.cgi?id=761670
Tim-Philipp Müller [Mon, 8 Feb 2016 00:10:33 +0000 (00:10 +0000)]
matroska: get rid of _stdint.h include
Thiago Santos [Fri, 5 Feb 2016 23:00:57 +0000 (20:00 -0300)]
tests: extend the AM_TESTS_ENVIRONMENT from check.mak
To get the CK_DEFAULT_TIMEOUT defined for all tests
https://bugzilla.gnome.org/show_bug.cgi?id=761472
Thiago Santos [Fri, 5 Feb 2016 21:04:31 +0000 (18:04 -0300)]
Automatic update of common submodule
From 86e4663 to b64f03f
Sebastian Dröge [Sat, 30 Jan 2016 17:43:30 +0000 (18:43 +0100)]
rtpjpegpay: Skip APP and JPG markers and print warnings for unknown markers
For APP/JPG markers the size is following and we have to skip that. This is
not really a problem unless the marker contains e.g. a preview JPEG or
something else that we might interprete as another marker.
Seungha Yang [Tue, 26 Jan 2016 13:37:30 +0000 (22:37 +0900)]
qtdemux: fix framerate calculation for fragmented format
qtdemux calculates framerate using duration and the number of sample.
In case of fragmented mp4 format, however, the number of sample can
be figure out after parsing every moof box. Because qtdemux does not
parse every moof in QTDEMUX_STATE_HEADER state, it will cause incorrect
framerate calculation.
This patch will triger gst_qtdemux_configure_stream() for every new moof.
Then, framerate will be calculated by using duration and n_samples of the moof.
https://bugzilla.gnome.org/show_bug.cgi?id=760774
Seungha Yang [Thu, 28 Jan 2016 13:36:23 +0000 (22:36 +0900)]
qtdemux: handling zero segment-duration edit list
Based on document ISO_IEC_14496-12, edit list box can have
segment duration as zero. It does not imply that media_start equals to
media_stop. But, it just indicates a sample which should be presented
at the first. This patch derives segment duration using media_time
and duration of file. And set derived duration to segment-duration.
https://bugzilla.gnome.org/show_bug.cgi?id=760781
Seungha Yang [Thu, 28 Jan 2016 12:36:54 +0000 (21:36 +0900)]
qtdemux: expose streams with first moof for fragmented format
In case of push mode, qtdemux expose streams after got moov box.
We can not guarantee that a moov box has sample data such as sample duration
and the number of sample in stbl box for fragmented format case.
So, if a moov has no sample data, streams will not be exposed until get the first moof.
https://bugzilla.gnome.org/show_bug.cgi?id=760779
Sebastian Dröge [Wed, 27 Jan 2016 17:48:17 +0000 (18:48 +0100)]
deinterlace: Check for subset instead of non-empty intersection for ACCEPT_CAPS
Sebastian Dröge [Wed, 27 Jan 2016 17:44:23 +0000 (18:44 +0100)]
deinterlace: Unset RECONFIGURE flag on srcpad whenever we configure new caps
Prevents double-negotiation during startup and in some other cases.
Sebastian Dröge [Wed, 27 Jan 2016 15:43:22 +0000 (16:43 +0100)]
deinterlace: Add negotiation unit tests for all 4 modes
These now check the output caps based on the input caps and a following
capsfilter and make sure the caps are exactly as expected.
https://bugzilla.gnome.org/show_bug.cgi?id=760995
https://bugzilla.gnome.org/show_bug.cgi?id=720388
Vivia Nikolaidou [Tue, 26 Jan 2016 16:39:20 +0000 (17:39 +0100)]
deinterlace: Do passthrough in auto mode if downstream only supports interlaced
If the following conditions are met:
1) upstream and downstream caps are compatible
2) upstream is interlaced
3) downstream doesn't support progressive mode
then deinterlace will just do passthrough instead of failing to link.
This is done with the following scenario in mind:
videotestsrc ! "video/x-raw,interlace-mode=interleaved" ! deinterlace
name=dein_src ! tee name=t ! queue ! deinterlace name=dein_file ! filesink t. !
queue ! deinterlace name=dein_desktop ! autovideosink
In this case, dein_src will do the deinterlacing. However,
videotestsrc ! "video/x-raw,interlace-mode=interleaved" ! deinterlace
name=dein_src ! tee name=t ! queue ! deinterlace name=dein_file ! filesink t. !
queue ! deinterlace name=dein_desktop ! autovideosink t. ! queue !
"video/x-raw,interlace-mode=interleaved" ! fakesink
In this case, caps auto-negotiation will make dein_file and dein_desktop do
the deinterlacing, while dein_src will be passthrough.
https://bugzilla.gnome.org/show_bug.cgi?id=760995
Sebastian Dröge [Tue, 26 Jan 2016 17:05:51 +0000 (18:05 +0100)]
deinterlace: Add mode=auto-strict
In this mode we will passthrough all progressive caps but interlaced caps must be
caps where we actually support deinterlacing.
This is the only difference between auto and auto-strict, auto would
passthrough all unsupported interlaced caps.
https://bugzilla.gnome.org/show_bug.cgi?id=720388
Sebastian Dröge [Tue, 26 Jan 2016 16:50:30 +0000 (17:50 +0100)]
deinterlace: Implement reconfiguration a bit better
And e.g. consider reconfiguration caused by RECONFIGURE events too.
https://bugzilla.gnome.org/show_bug.cgi?id=720388
Sebastian Dröge [Tue, 26 Jan 2016 10:57:09 +0000 (11:57 +0100)]
deinterlace: Rewrite caps negotiation
Previously the result of the CAPS query and ACCEPT_CAPS depended on what kind
of caps were last set, and e.g. if we last had interlaced caps or not. That's
just broken.
Also previously the handling of non-sysmem caps features was rather random and
unusuable.
Now the behaviour is the following, depending on the mode property:
1) mode=disabled
Completely do passthrough of everything
2) mode=interlaced
Only accept formats we can actually deinterlace, and accept interlaced
and progressive content and always run the deinterlacer and output
progressive content
3) mode=auto (i.e. playbin)
Accept all progressive formats as passthrough, accept all formats that we
can deinterlace ourselves (which we do then), but also accept everything
else for which we then just passthrough. In auto mode, deinterlacing is best
effort: If we can, we deinterlace, if we can't we just output interlaced
content.
https://bugzilla.gnome.org/show_bug.cgi?id=720388
https://bugzilla.gnome.org/show_bug.cgi?id=760553
Sebastian Dröge [Tue, 26 Jan 2016 10:34:40 +0000 (11:34 +0100)]
deinterlace: Remove unused, obsolete bufferalloc code
Matej Knopp [Tue, 26 Jan 2016 17:50:38 +0000 (18:50 +0100)]
matroskamux: use A_AAC instead of A_AAC/MPEGx/y
Some GoogleCast compatible devices ignore A_AAC/MPEGx/y tracks; Also according to http://wiki.multimedia.cx/index.php?title=Matroska A_AAC/MPEGx/y is obsolete
https://bugzilla.gnome.org/show_bug.cgi?id=761144
Víctor Manuel Jáquez Leal [Mon, 25 Jan 2016 16:21:24 +0000 (17:21 +0100)]
gst: Fix unintialized variable warnings
While cross-compiling with Linaro GCC 5.1-2015.08, it complained
about a couple unitialized variables.
This patch initializes them to zero.
https://bugzilla.gnome.org/show_bug.cgi?id=761094
George Kiagiadakis [Mon, 25 Jan 2016 14:03:23 +0000 (15:03 +0100)]
splitmuxsrc: print potentially negative offset with a sign
Nicolas Dufresne [Thu, 21 Jan 2016 22:41:55 +0000 (17:41 -0500)]
v4l2: Re-add colorimetry field for RGB formats
This time, check if it's an RGB format and sets the transformation
matrix to identity. The rest of the colorimetry information is
meaningfull and shall be kept.
https://bugzilla.gnome.org/show_bug.cgi?id=759624
Wim Taymans [Fri, 22 Jan 2016 09:03:50 +0000 (10:03 +0100)]
v4l2: fix sRGB colorspace definition
V4l2 can also use the sRGB colorspace for YUV formats and thus needs a
default matrix.
Tim-Philipp Müller [Thu, 21 Jan 2016 15:29:46 +0000 (15:29 +0000)]
taginject: fix sample pipeline in docs
https://bugzilla.gnome.org/show_bug.cgi?id=679571
Wim Taymans [Thu, 21 Jan 2016 09:49:44 +0000 (10:49 +0100)]
v4l2: Add adobe colorspace support
Use the new primaries and transfer function for Adobe RGB.
Explicitly list the colorimetry instead of using the default GStreamer
ones. The defaults for BT2020, for example, do not match.
Explicitly set the matrix of SRGB to RGB.
Sebastian Dröge [Wed, 20 Jan 2016 11:41:33 +0000 (13:41 +0200)]
vp8enc: Ensure that we always have valid frame user data before using it
Otherwise we're going to dereference NULL pointers.
Sebastian Dröge [Wed, 20 Jan 2016 08:02:48 +0000 (10:02 +0200)]
vpxdec: Unref frame in all code paths of handle_frame()
https://bugzilla.gnome.org/show_bug.cgi?id=760666
Thibault Saunier [Tue, 19 Jan 2016 21:49:20 +0000 (22:49 +0100)]
vpxenc: Unref frame on ERROR
All code paths for handle_frame() must somehow take ownership of the frame, be
it by actually unreffing, forwarding the frame elsewhere or storing it for
later.
http://bugzilla.gnome.org/show_bug.cgi?id=760666
Jan Schmidt [Wed, 20 Jan 2016 07:20:43 +0000 (18:20 +1100)]
v4l2: Don't free props structure twice.
gst_v4l2_device_provider_probe_device() frees the passed props
structure, don't free it again in the caller.
Nicolas Dufresne [Tue, 19 Jan 2016 20:15:35 +0000 (15:15 -0500)]
v4l2object: Cleanup uneeded return statement
Nicolas Dufresne [Tue, 19 Jan 2016 20:14:59 +0000 (15:14 -0500)]
v4l2object: Don't set colorimetry for non YUV formats
Setting colormetry in caps for RGB have no meaning, but worst it
confuses the converters downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=759624
Tim-Philipp Müller [Tue, 19 Jan 2016 13:01:17 +0000 (13:01 +0000)]
rtp: fix compiler warnings with gcc-6
In file included from gstrtpL16depay.h:27:0,
from gstrtp.c:73:
gstrtpchannels.h:154:33: error: 'channel_orders' defined but not used [-Werror=unused-const-variable]
static const GstRTPChannelOrder channel_orders[] =
Sebastian Dröge [Tue, 19 Jan 2016 12:57:03 +0000 (14:57 +0200)]
wavparse: Don't play anything after the end of the data chunk even when seeking
Especially in push mode we would completely ignore the size of the data chunk
when not stop position is given for the seek. Instead make sure that the end
offset is at most the end of the data chunk if known.
Without this we would output anything after the data chunk, possibly causing
loud noises if the media file is followed by an INFO chunk or an ID3 tag.
Sebastian Dröge [Tue, 19 Jan 2016 12:55:57 +0000 (14:55 +0200)]
wavparse: Don't do calculations with -1 offsets when handling SEGMENT events
We use that to signal "infinity", taking the difference between that and some
other value is not going to give us any useful result for the end offsets of
segments.
Sebastian Dröge [Mon, 18 Jan 2016 09:30:45 +0000 (11:30 +0200)]
Revert "WIP: rtpjitterbuffer: Add RFC7273 media clock handling"
This reverts commit
271501f6576de4d141e7c2f618e28b9e3b1e5b38.
It wasn't meant to be pushed yet as the commit message indicates.
Aleix Conchillo Flaqué [Tue, 12 Jan 2016 22:01:21 +0000 (14:01 -0800)]
rtspsrc: handle rtcp/srtcp caps properly when using interleaved data
We check the stream profile and use the proper RTCP caps:
application/x-srtcp if we are using a secure profile and
application/x-rtcp otherwise.
https://bugzilla.gnome.org/show_bug.cgi?id=760556
Sebastian Dröge [Tue, 5 Jan 2016 14:15:16 +0000 (16:15 +0200)]
WIP: rtpjitterbuffer: Add RFC7273 media clock handling
Thibault Saunier [Fri, 15 Jan 2016 11:36:35 +0000 (11:36 +0000)]
vp8enc: Return FLOW_ERROR when an error accures
FALSE would mean FLOW_OK
https://bugzilla.gnome.org/show_bug.cgi?id=760666
Nirbheek Chauhan [Thu, 14 Jan 2016 22:27:45 +0000 (03:57 +0530)]
osxaudio: break as soon as the device is found
No need to loop further if there's no side-effects for it
Nirbheek Chauhan [Thu, 14 Jan 2016 22:26:49 +0000 (03:56 +0530)]
osxaudio: Fix error handling when selecting/opening devices
Post an element error when the CoreAudio device cannot be selected or opened.
Also ensure that we post a GST_ERROR with more detail.
Sebastian Dröge [Wed, 13 Jan 2016 22:40:20 +0000 (23:40 +0100)]
wavparse: When flushing on EOS, don't process more data than the "data" size
Even if we have more data queued up when flushing than the size of the data
chunk, don't process and output it. If the data size is known, this likely
contains another chunk (e.g. an INFO chunk) or things like ID3 tags. Just
outputting them as if they were data is going to cause unexpected behaviour
and unpleasant audio noises.
Antonio Ospite [Fri, 29 Aug 2014 13:40:23 +0000 (15:40 +0200)]
tests: fix a thinko in the wavenc example
The code is supposed to follow somehow what the comment above says, that
is to have one channel with a wave of freq 440 and the other channel
with a wave of freq 880, but an off by one error results in frequencies
of 0 and 440.
https://bugzilla.gnome.org/show_bug.cgi?id=735673
Antonio Ospite [Fri, 29 Aug 2014 13:07:58 +0000 (15:07 +0200)]
interleave: Fix the example by setting channel-masks in the sink pads
The current example does not work, it fails with:
ERROR: from element /GstPipeline:pipeline0/GstDecodeBin:decodebin0/GstWavParse:wavparse0: Internal data flow error.
gstwavparse.c(2178): gst_wavparse_loop (): /GstPipeline:pipeline0/GstDecodeBin:decodebin0/GstWavParse:wavparse0:
streaming task paused, reason not-negotiated (-4)
This is because negotiation with wavenc gets messed up by the missing
channel positions configuration.
The proper way to define the channel layout when using the interleave
element in code would be to set the channel-positions property, but
gst-launch-1.0 does not know how to deal with arrays; so the example
pipeline works around the issue by setting the channel-masks in the sink
pads.
Also fix a repetition in the deinterleave example description
https://bugzilla.gnome.org/show_bug.cgi?id=735673
Tim Sheridan [Mon, 11 Jan 2016 16:29:55 +0000 (16:29 +0000)]
sbcparse: Fix frame length calculation
SBC frame length calculation wasn't being rounded up to the nearest byte
(as specified in the A2DP 1.0 specification, section 12.9). This could
cause 'stereo' and 'joint stereo' mode SBC streams to have incorrectly
calculated frame lengths.
Incorrect frame length calculation causes frame coalescing to fail, as
subsequent frames in the stream aren't found in the expected locations.
https://bugzilla.gnome.org/show_bug.cgi?id=742446
Reynaldo H. Verdejo Pinochet [Mon, 11 Jan 2016 06:54:12 +0000 (22:54 -0800)]
flacparse: demote warning on wrong reserved value to fixme
We are likely just parsing a backward-compatible stream we
don't fully support.
Thiago Santos [Fri, 8 Jan 2016 19:27:05 +0000 (16:27 -0300)]
imagefreeze: simplify caps selection
The downstream caps query with a filter alraedy gives us the possible
intersection so there is no need to check it again with downstream
if it is supported. Just try to set it directly.
Tim-Philipp Müller [Thu, 7 Jan 2016 20:42:41 +0000 (20:42 +0000)]
rtph264depay: fix unnecessary sub-buffer creation
We create a sub-buffer just to copy over its metas and then
throw it away immediately, just use the original input buffer
directly.
Tim-Philipp Müller [Thu, 7 Jan 2016 20:38:27 +0000 (20:38 +0000)]
rtpdvdepay: fix unnecessary sub-buffer creation
We create a sub-buffer just to copy over its metas and then
throw it away immediately, just use the original input buffer
directly.
Tim-Philipp Müller [Thu, 7 Jan 2016 20:34:05 +0000 (20:34 +0000)]
rtpamrdepay: fix unnecessary sub-buffer creation
We create a sub-buffer just to copy over its metas and then
throw it away immediately, just use the original input buffer
directly.
Tim-Philipp Müller [Thu, 7 Jan 2016 20:27:29 +0000 (20:27 +0000)]
rtpvrawdepay: fix major memory leak and performance issue
We call gst_rtp_buffer_get_payload() which creates a sub-buffer
of each input buffer, just to copy over metas, and then leak it.
https://bugzilla.gnome.org/show_bug.cgi?id=760289
Sebastian Dröge [Fri, 8 Jan 2016 13:32:47 +0000 (15:32 +0200)]
rganalysis: Fix compiler warnings in the unit test
elements/rganalysis.c:919:66: error: shifting a negative signed value is undefined
[-Werror,-Wshift-negative-value]
push_buffer (test_buffer_const_int16_stereo (8000, 16, 512, -1 << 14, 0));
~~ ^
elements/rganalysis.c:929:69: error: shifting a negative signed value is undefined
[-Werror,-Wshift-negative-value]
push_buffer (test_buffer_const_int16_stereo (8000, 16, 512, 0, -1 << 14));
~~ ^
elements/rganalysis.c:939:64: error: shifting a negative signed value is undefined
[-Werror,-Wshift-negative-value]
push_buffer (test_buffer_const_int16_mono (8000, 16, 512, -1 << 14));
~~ ^
Tim-Philipp Müller [Tue, 5 Jan 2016 18:13:06 +0000 (18:13 +0000)]
flacparse: don't map buffer multiple times when parsing
Steven Hoving [Thu, 7 Jan 2016 16:20:30 +0000 (18:20 +0200)]
matroska: Store subtitle stream count in the correct variable
And don't override the video stream count instead.
Sebastian Dröge [Tue, 5 Jan 2016 16:59:06 +0000 (18:59 +0200)]
equalizer: The child-proxy API is GObject based in 1.x
Not GstObject anymore.
Pablo Anton [Thu, 21 May 2015 15:41:12 +0000 (17:41 +0200)]
v4l2-*: Configuring output pool correctly for using drivers min_buffer if present.
Signed-off-by: Pablo Anton <pablo.anton@vodalys-labs.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755736
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 23:46:31 +0000 (15:46 -0800)]
flacparse: add debug msg on CRC mismatch while validating frame header
Reynaldo H. Verdejo Pinochet [Fri, 1 Jan 2016 00:00:49 +0000 (16:00 -0800)]
flacparse: drop unneeded braces at _parse_frame() exit
Additionally, drop redundant comment & line break
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 23:55:18 +0000 (15:55 -0800)]
flacparse: minor grammar correction
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 23:34:57 +0000 (15:34 -0800)]
flacparse: update URLs on pointers to online spec
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 22:40:15 +0000 (14:40 -0800)]
flacparse: make buffer DTS setting explicitly unconditional
We are setting it to PTS regardless of block_strategy
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 22:21:40 +0000 (14:21 -0800)]
flacparse: add actual invalid block type to warning
For someone that read the spec is clear the only *invalid*
data block type is 127. For the rest, its useful information.
Additionally. values 7-126 are currently reserved by the
spec so the situation might change in the future.
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 22:12:36 +0000 (14:12 -0800)]
flacparse: use shift instead of mask & comp
We are only interested on the first bit of the first
byte of the metadata block header to figure out whether
is marked as the last one. The shift makes it quite
clearer.
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 20:52:13 +0000 (12:52 -0800)]
flacparse: warn on wishful parsing of weird headers
If we get anything from 7 to 126 as type when parsing
a metadata block header, we are likely dealing with a
FLAC stream version we don't fully understand. Issue
a warning if so.
Document function assumptions regarding the passed-on
type while at this.
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 19:33:45 +0000 (11:33 -0800)]
flacparse: show meaningful info on frame CRC check
As CRCs are calculated for the comparition already, we
might as well (cheaply) inform the user how the numbers
differ if a missmatched pair is found.
While at it:
Rephrase candidate-frame message to make more sense
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 10:40:43 +0000 (02:40 -0800)]
flacparse: drop remaining trailing whitespace
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 10:15:06 +0000 (02:15 -0800)]
flacparse: drop superflous else clauses
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 09:09:51 +0000 (01:09 -0800)]
flacparse: factor out buffer time and offset resetting
Avoids multiple occurrences of the same resetting pattern
Reynaldo H. Verdejo Pinochet [Thu, 31 Dec 2015 08:54:48 +0000 (00:54 -0800)]
flacparse: move block handling by type out of _parse_frame()
Hyunjun Ko [Wed, 7 Oct 2015 09:51:25 +0000 (18:51 +0900)]
rtspsrc: replace duplicated codes to call new base sdp apis
https://bugzilla.gnome.org/show_bug.cgi?id=745880
Reynaldo H. Verdejo Pinochet [Wed, 30 Dec 2015 20:16:56 +0000 (12:16 -0800)]
flacparse: drop redundant return statement on _header_is_valid()
Fix the rather vague error message while at it.
Reynaldo H. Verdejo Pinochet [Wed, 30 Dec 2015 09:56:26 +0000 (01:56 -0800)]
flacparse: rework gst_flac_parse_frame_is_valid()
drop unnecessary nesting looking for end of frame
Reynaldo H. Verdejo Pinochet [Wed, 30 Dec 2015 08:37:04 +0000 (00:37 -0800)]
flacparse: factor out context clearing routine
Sebastian Dröge [Tue, 29 Dec 2015 16:05:56 +0000 (18:05 +0200)]
matroskademux: Guard against no codec data in prores caps creation
CID 1346532
Sebastian Dröge [Tue, 29 Dec 2015 15:58:38 +0000 (17:58 +0200)]
vpxdec: Initialize buffer variable to NULL
False positive but trivial to fix and possibly causing compiler warnings at
some point in the future too.
CID 1346535
Wim Taymans [Mon, 27 Jul 2015 13:53:26 +0000 (15:53 +0200)]
v4l2deviceprovider: add properties to the device
Add properties to the device with exactly the same keys and sematics
as what pulseaudio uses as property keys.
Also handle the case when a device is probed manually and not through gudev.
https://bugzilla.gnome.org//show_bug.cgi?id=759780
Sebastian Dröge [Fri, 25 Dec 2015 10:41:19 +0000 (11:41 +0100)]
scaletempo: Free the various buffers in GstBaseTransform::stop()
Previously we leaked them completely, but as they're specific to the caps
freeing them in stop() instead of finalize() makes most sense.
Sebastian Dröge [Thu, 24 Dec 2015 14:28:06 +0000 (15:28 +0100)]
Back to development
Sebastian Dröge [Thu, 24 Dec 2015 13:16:21 +0000 (14:16 +0100)]
Release 1.7.1
Sebastian Dröge [Thu, 24 Dec 2015 12:19:24 +0000 (13:19 +0100)]
Update .po files
Sebastian Dröge [Thu, 24 Dec 2015 11:22:32 +0000 (12:22 +0100)]
po: Update translations
Thiago Santos [Mon, 21 Dec 2015 12:57:33 +0000 (09:57 -0300)]
qtdemux: drop flushes from our own offset seek
Prevents downstream from receiving flushes for a seek only in
upstream. Those seeks are only to start reading from the right
offset when skipping or returning to qt atoms.
https://bugzilla.gnome.org/show_bug.cgi?id=758928
Thibault Saunier [Wed, 11 Nov 2015 15:53:19 +0000 (16:53 +0100)]
matroskademux: Always set the channel mask for PCM streams
Just use the gst_audio_channel_get_fallback_mask function for now as
the specification is too complicated and nobody implements it.
Thomas Roos [Mon, 21 Dec 2015 10:37:26 +0000 (11:37 +0100)]
directsoundsink: Fix sleep for buffer-time lower than 200000
https://bugzilla.gnome.org/show_bug.cgi?id=748680
Sebastian Dröge [Mon, 21 Dec 2015 11:31:19 +0000 (12:31 +0100)]
configure: Use -Bsymbolic-functions if available
While this is more useful for libraries, some of our plugins with multiple
files and some internal API can also benefit from this.
William Manley [Fri, 18 Dec 2015 15:34:52 +0000 (15:34 +0000)]
progressreport: add support for using format=buffers with do-query=false
This is useful for investigating and debugging pipelines which are
producing buffers at a slower/faster rate than you would expect.
https://bugzilla.gnome.org/show_bug.cgi?id=759635
Nicolas Dufresne [Fri, 18 Dec 2015 20:49:43 +0000 (15:49 -0500)]
v4l2object: Update formats table
This change add all the new RGB based format. Those format removes the
ambiguity with the ALPHA channel. Some other missing multiplanar format
has been added with some additional cleanup.
Jan Schmidt [Thu, 17 Dec 2015 18:17:15 +0000 (05:17 +1100)]
qtmux: Don't write invalid edit list start time.
Avoid writing a negative number as a large positive
integer in an edit list when the first_ts is smaller
than the first_dts - which can happen when the first
packet received has a PTS but no DTS.
https://bugzilla.gnome.org/show_bug.cgi?id=759615
Jan Schmidt [Fri, 4 Dec 2015 12:16:45 +0000 (23:16 +1100)]
splitmuxsink: Only update running time when it increases.
Don't increment running time from every buffer. The correct
logic to only increment when running time advances is a
little further down, so delete this left-over line.
Thibault Saunier [Wed, 18 Nov 2015 10:01:20 +0000 (11:01 +0100)]
matroska-mux: Implement prores support
https://bugzilla.gnome.org/show_bug.cgi?id=758258
Jan Schmidt [Wed, 18 Nov 2015 05:20:38 +0000 (16:20 +1100)]
matroska-demux: Play ProRes video streams
Generate video/x-prores caps for ProRes video streams.
Every frame needs an 8 byte header prepended, as described in
http://wiki.multimedia.cx/index.php?title=Apple_ProRes#Frame_layout
so do that in a post-processing callback.
https://bugzilla.gnome.org/show_bug.cgi?id=758258
Ravi Kiran K N [Fri, 18 Dec 2015 04:48:09 +0000 (10:18 +0530)]
dvdec: Remove unused fields
Remove unused fields frame_len and space
https://bugzilla.gnome.org/show_bug.cgi?id=759614
Vincent Dehors [Thu, 17 Dec 2015 15:03:04 +0000 (16:03 +0100)]
rtpj2kdepay: Push one JPEG2000 frame per buffer, not a buffer list with multiple buffers
https://bugzilla.gnome.org/show_bug.cgi?id=758943
Luis de Bethencourt [Wed, 16 Dec 2015 11:43:58 +0000 (11:43 +0000)]
dv1394: log error if failed to set socket status flag
Log an error message if failed to set write or read socket as
non-blocking.
CID 1139608
CID 1139609
Dave Craig [Tue, 15 Dec 2015 17:10:00 +0000 (17:10 +0000)]
audioparsers: Check for NULL return value of gst_pad_get_current_caps()
https://bugzilla.gnome.org/show_bug.cgi?id=759503
Sebastian Dröge [Wed, 16 Dec 2015 08:35:53 +0000 (09:35 +0100)]
docs: update to git
Nicolas Dufresne [Tue, 15 Dec 2015 19:27:22 +0000 (14:27 -0500)]
vpx: Add missing headers in Makefile.am
This fixes distcheck.
https://bugzilla.gnome.org/show_bug.cgi?id=755510
Prashant Gotarne [Thu, 24 Sep 2015 07:27:00 +0000 (12:57 +0530)]
vpx: created common baseclass GstVPXEnc
GstVP8Enc and GstVP9Enc has almost 80% code in common.
created common baseclass GstVPXEnc for GstVP8Enc and GstVP9Enc
https://bugzilla.gnome.org/show_bug.cgi?id=755510
Nicolas Dufresne [Tue, 15 Dec 2015 17:57:53 +0000 (12:57 -0500)]
vpxdec: Remove unneeded add video_meta
This also remove copies for VP8, which was not correctly in place
in previous related patch.
Prashant Gotarne [Tue, 15 Dec 2015 04:19:24 +0000 (09:49 +0530)]
vpx: created common base class GstVPXdec for vpx decoders
Base class for the vp8dec and vp9dec.
https://bugzilla.gnome.org/show_bug.cgi?id=755510