review.tizen.org Git - platform/kernel/linux-starfive.git/log

leds: multicolor: Use rounded division when calculating color components

[ Upstream commit 065d099f1be58187e6629273c50b948a02b7e1bf ]

Given channel intensity, LED brightness and max LED brightness, the
multicolor LED framework helper led_mc_calc_color_components() computes
the color channel brightness as

    chan_brightness = brightness * chan_intensity / max_brightness

Consider the situation when (brightness, intensity, max_brightness) is
for example (16, 15, 255), then chan_brightness is computed to 0
although the fractional divison would give 0.94, which should be rounded
to 1.

Use DIV_ROUND_CLOSEST here for the division to give more realistic
component computation:

    chan_brightness = DIV_ROUND_CLOSEST(brightness * chan_intensity,
                                        max_brightness)

Fixes: 55d5d3b46b08 ("leds: multicolor: Introduce a multicolor class definition")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230801124931.8661-1-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: pwm: Fix error code in led_pwm_create_fwnode()

[ Upstream commit cadb2de2a7fd9e955381307de3eddfcc386c208e ]

Negative -EINVAL was intended, not positive EINVAL. Fix it.

Fixes: 95138e01275e ("leds: pwm: Make error handling more robust")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/a33b981a-b2c4-4dc2-b00a-626a090d2f11@moroto.mountain
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rpmsg: glink: Add check for kstrdup

[ Upstream commit b5c9ee8296a3760760c7b5d2e305f91412adc795 ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20230619030631.12361-1-jiasheng@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write

[ Upstream commit 19a1d46bd699940a496d3b0d4e142ef99834988c ]

inno_write is used to configure 0xaa reg, that also hold the
POST_PLL_POWER_DOWN bit.
When POST_PLL_REFCLK_SEL_TMDS is configured the power down bit is not
taken into consideration.

Fix this by keeping the power down bit until configuration is complete.
Also reorder the reg write order for consistency.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-5-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate

[ Upstream commit d5ef343c1d62bc4c4c2c393af654a41cb34b449f ]

inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found
in the pre pll config table when the fractal divider is used.
This can prevent proper power_on because a tmdsclock for the new rate
is not found in the pre pll config table.

Fix this by saving and returning a rounded pixel rate that exist
in the pre pll config table.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-3-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328

[ Upstream commit 644c06dfbd0da713f772abf0a8f8581ac78e6264 ]

inno_hdmi_phy_rk3328_clk_set_rate() is using the RK3228 macro
when configuring vco_div_5 on RK3328.

Fix this by using correct vco_div_5 macro for RK3328.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230615171005.2251032-2-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Modify the dependence of attribute pasid_enabled

[ Upstream commit 50c5e6f41d5ad7c731c31135a30d0e4f0e4fea26 ]

Kernel PASID and user PASID are separately enabled. User needs to know the
user PASID enabling status to decide how to use IDXD device in user space.
This is done via the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled.
It's unnecessary for user to know the kernel PASID enabling status because
user won't use the kernel PASID. But instead of showing the user PASID
enabling status, the attribute shows the kernel PASID enabling status. Fix
the issue by showing the user PASID enabling status in the attribute.

Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230614062706.1743078-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: brcmnand: Fix mtd oobsize

[ Upstream commit 60177390fa061c62d156f4a546e3efd90df3c183 ]

brcmnand controller can only access the flash spare area up to certain
bytes based on the ECC level. It can be less than the actual flash spare
area size. For example, for many NAND chip supporting ECC BCH-8, it has
226 bytes spare area. But controller can only uses 218 bytes. So brcmand
driver overrides the mtd oobsize with the controller's accessible spare
area size. When the nand base driver utilizes the nand_device object, it
resets the oobsize back to the actual flash spare aprea size from
nand_memory_organization structure and controller may not able to access
all the oob area as mtd advises.

This change fixes the issue by overriding the oobsize in the
nand_memory_organization structure to the controller's accessible spare
area size.

Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-6-william.zhang@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Fix race issue between cpu buffer write and swap

[ Upstream commit 3163f635b20e9e1fb4659e74f47918c9dddfe64e ]

Warning happened in rb_end_commit() at code:
if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)))

  WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142
rb_commit+0x402/0x4a0
  Call Trace:
   ring_buffer_unlock_commit+0x42/0x250
   trace_buffer_unlock_commit_regs+0x3b/0x250
   trace_event_buffer_commit+0xe5/0x440
   trace_event_buffer_reserve+0x11c/0x150
   trace_event_raw_event_sched_switch+0x23c/0x2c0
   __traceiter_sched_switch+0x59/0x80
   __schedule+0x72b/0x1580
   schedule+0x92/0x120
   worker_thread+0xa0/0x6f0

It is because the race between writing event into cpu buffer and swapping
cpu buffer through file per_cpu/cpu0/snapshot:

  Write on CPU 0             Swap buffer by per_cpu/cpu0/snapshot on CPU 1
  --------                   --------
                             tracing_snapshot_write()
                               [...]

  ring_buffer_lock_reserve()
    cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a';
    [...]
    rb_reserve_next_event()
      [...]

                               ring_buffer_swap_cpu()
                                 if (local_read(&cpu_buffer_a->committing))
                                     goto out_dec;
                                 if (local_read(&cpu_buffer_b->committing))
                                     goto out_dec;
                                 buffer_a->buffers[cpu] = cpu_buffer_b;
                                 buffer_b->buffers[cpu] = cpu_buffer_a;
                                 // 2. cpu_buffer has swapped here.

      rb_start_commit(cpu_buffer);
      if (unlikely(READ_ONCE(cpu_buffer->buffer)
          != buffer)) { // 3. This check passed due to 'cpu_buffer->buffer'
        [...]           //    has not changed here.
        return NULL;
      }
                                 cpu_buffer_b->buffer = buffer_a;
                                 cpu_buffer_a->buffer = buffer_b;
                                 [...]

      // 4. Reserve event from 'cpu_buffer_a'.

  ring_buffer_unlock_commit()
    [...]
    cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!!
    rb_commit(cpu_buffer)
      rb_end_commit()  // 6. WARN for the wrong 'committing' state !!!

Based on above analysis, we can easily reproduce by following testcase:
  ``` bash
  #!/bin/bash

  dmesg -n 7
  sysctl -w kernel.panic_on_warn=1
  TR=/sys/kernel/tracing
  echo 7 > ${TR}/buffer_size_kb
  echo "sched:sched_switch" > ${TR}/set_event
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  while [ true ]; do
          echo 1 > ${TR}/per_cpu/cpu0/snapshot
  done &
  ```

To fix it, IIUC, we can use smp_call_function_single() to do the swap on
the target cpu where the buffer is located, so that above race would be
avoided.

Link: https://lore.kernel.org/linux-trace-kernel/20230831132739.4070878-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: f1affcaaa861 ("tracing: Add snapshot in the per_cpu trace directories")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Remove extra space at the end of hwlat_detector/mode

[ Upstream commit 2cf0dee989a8b2501929eaab29473b6b1fa11057 ]

Space is printed after each mode value including the last one:
$ echo \"$(sudo cat /sys/kernel/tracing/hwlat_detector/mode)\"
"none [round-robin] per-cpu "

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link: https://lore.kernel.org/linux-trace-kernel/20230825103432.7750-1-m.kobuk@ispras.ru
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 8fa826b7344d ("trace/hwlat: Implement the mode config option")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/speculation: Mark all Skylake CPUs as vulnerable to GDS

[ Upstream commit c9f4c45c8ec3f07f4f083f9750032a1ec3eab6b2 ]

The Gather Data Sampling (GDS) vulnerability is common to all Skylake
processors.  However, the "client" Skylakes* are now in this list:

https://www.intel.com/content/www/us/en/support/articles/000022396/processors.html

which means they are no longer included for new vulnerabilities here:

https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html

or in other GDS documentation.  Thus, they were not included in the
original GDS mitigation patches.

Mark SKYLAKE and SKYLAKE_L as vulnerable to GDS to match all the
other Skylake CPUs (which include Kaby Lake).  Also group the CPUs
so that the ones that share the exact same vulnerabilities are next
to each other.

Last, move SRBDS to the end of each line.  This makes it clear at a
glance that SKYLAKE_X is unique.  Of the five Skylakes, it is the
only "server" CPU and has a different implementation from the
clients of the "special register" hardware, making it immune to SRBDS.

This makes the diff much harder to read, but the resulting table is
worth it.

I very much appreciate the report from Michael Zhivich about this
issue.  Despite what level of support a hardware vendor is providing,
the kernel very much needs an accurate and up-to-date list of
vulnerable CPUs.  More reports like this are very welcome.

* Client Skylakes are CPUID 406E3/506E3 which is family 6, models
  0x4E and 0x5E, aka INTEL_FAM6_SKYLAKE and INTEL_FAM6_SKYLAKE_L.

Reported-by: Michael Zhivich <mzhivich@akamai.com>
Fixes: 8974eb588283 ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tick/rcu: Fix false positive "softirq work is pending" messages

[ Upstream commit 96c1fa04f089a7e977a44e4e8fdc92e81be20bef ]

In commit 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.

In doing so, the code essentially went from a one conditional:

if (a && b && c)
warn();

to a three conditional:

if (!a)
return;
if (!b)
return;
if (!c)
return;
warn();

But that conversion got the condition for the RT specific
local_bh_blocked() wrong. The original condition was:

    !local_bh_blocked()

but the conversion failed to negate it so it ended up as:

        if (!local_bh_blocked())
return false;

This issue lay dormant until another fixup for the same commit was added
in commit a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition").
This commit realized the ratelimit was essentially set to zero instead
of ten, and hence *no* softirq pending messages would ever be issued.

Once this commit was backported via linux-stable, both the v6.1 and v6.4
preempt-rt kernels started printing out 10 instances of this at boot:

  NOHZ tick-stop error: local softirq work is pending, handler #80!!!

Remove the negation and return when local_bh_blocked() evaluates to true to
bring the correct behaviour back.

Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Wen Yang <wenyang.linux@foxmail.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230818200757.1808398-1-paul.gortmaker@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86/amd/pmf: Fix a missing cleanup path

[ Upstream commit 4dbd6e61adc7e52dd1c9165f0ccaa90806611e40 ]

On systems that support slider notifications but don't otherwise support
granular slider the SPS cleanup path doesn't run.

This means that loading/unloading/loading leads to failures because
the sysfs files don't get setup properly when reloaded.

Add the missing cleanup path.

Fixes: 33c9ab5b493a ("platform/x86/amd/pmf: Notify OS power slider update")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230823185421.23959-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Correct devm device reference for hidinput input_dev name

[ Upstream commit 4794394635293a3e74591351fff469cea7ad15a2 ]

Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.

Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.

Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: c08d46aa805b ("HID: multitouch: devm conversion")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-3-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: uclogic: Correct devm device reference for hidinput input_dev name

[ Upstream commit dd613a4e45f8d35f49a63a2064e5308fa5619e29 ]

Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.

Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.

Reported-by: syzbot+3a0ebe8a52b89c63739d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/
Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: cce2dbdf258e ("HID: uclogic: name the input nodes based on their tool")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-2-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()

[ Upstream commit 6f20d3261265885f6a6be4cda49d7019728760e0 ]

Presently, if a call to logi_dj_recv_send_report() fails, we do
not learn about the error until after sending short
HID_OUTPUT_REPORT with hid_hw_raw_request().
To handle this somewhat unlikely issue, return on error in
logi_dj_recv_send_report() (minding ugly sleep workaround) and
take into account the result of hid_hw_raw_request().

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 6a9ddc897883 ("HID: logitech-dj: enable notifications on connect/disconnect")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20230613101635.77820-1-n.zhandarovich@fintech.ru
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/efa: Fix wrong resources deallocation order

[ Upstream commit dc202c57e9a1423aed528e4b8dc949509cd32191 ]

When trying to destroy QP or CQ, we first decrease the refcount and
potentially free memory regions allocated for the object and then
request the device to destroy the object. If the device fails, the
object isn't fully destroyed so the user/IB core can try to destroy the
object again which will lead to underflow when trying to decrease an
already zeroed refcount.

Deallocate resources in reverse order of allocating them to safely free
them.

Fixes: ff6629f88c52 ("RDMA/efa: Do not delay freeing of DMA pages")
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://lore.kernel.org/r/20230822082725.31719-1-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Correct wrong debug message

[ Upstream commit bee024d20451e4ce04ea30099cad09f7f75d288b ]

We need to print num_sle first then pbl->max_buf per the condition.
Also replace mem->pbl with pbl while at it.

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230821133255.31111-3-guoqing.jiang@linux.dev
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Balance the reference of cep->kref in the error path

[ Upstream commit b056327bee09e6b86683d3f709a438ccd6031d72 ]

The siw_connect can go to err in below after cep is allocated successfully:

1. If siw_cm_alloc_work returns failure. In this case socket is not
assoicated with cep so siw_cep_put can't be called by siw_socket_disassoc.
We need to call siw_cep_put twice since cep->kref is increased once after
it was initialized.

2. If siw_cm_queue_work can't find a work, which means siw_cep_get is not
called in siw_cm_queue_work, so cep->kref is increased twice by siw_cep_get
and when associate socket with cep after it was initialized. So we need to
call siw_cep_put three times (one in siw_socket_disassoc).

3. siw_send_mpareqrep returns error, this scenario is similar as 2.

So we need to remove one siw_cep_put in the error path.

Fixes: 6c52fdc244b5 ("rdma/siw: connection management")
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20230821133255.31111-2-guoqing.jiang@linux.dev
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "IB/isert: Fix incorrect release of isert connection"

[ Upstream commit dfe261107c080709459c32695847eec96238852b ]

Commit: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection") is
causing problems on OPA when DEVICE_REMOVAL is happening.

------------[ cut here ]------------
WARNING: CPU: 52 PID: 2117247 at drivers/infiniband/core/cq.c:359
ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
Modules linked in: nfsd nfs_acl target_core_user uio tcm_fc libfc
scsi_transport_fc tcm_loop target_core_pscsi target_core_iblock target_core_file
rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs
rfkill rpcrdma rdma_ucm ib_srpt sunrpc ib_isert iscsi_target_mod target_core_mod
opa_vnic ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm
ib_cm hfi1(-) rdmavt ib_uverbs intel_rapl_msr intel_rapl_common sb_edac ib_core
x86_pkg_temp_thermal intel_powerclamp coretemp i2c_i801 mxm_wmi rapl iTCO_wdt
ipmi_si iTCO_vendor_support mei_me ipmi_devintf mei intel_cstate ioatdma
intel_uncore i2c_smbus joydev pcspkr lpc_ich ipmi_msghandler acpi_power_meter
acpi_pad xfs libcrc32c sr_mod sd_mod cdrom t10_pi sg crct10dif_pclmul
crc32_pclmul crc32c_intel drm_kms_helper drm_shmem_helper ahci libahci
ghash_clmulni_intel igb drm libata dca i2c_algo_bit wmi fuse
CPU: 52 PID: 2117247 Comm: modprobe Not tainted 6.5.0-rc1+ #1
Hardware name: Intel Corporation S2600CWR/S2600CW, BIOS
SE5C610.86B.01.01.0014.121820151719 12/18/2015
RIP: 0010:ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
Code: ff 48 8b 43 40 48 8d 7b 40 48 83 e8 40 4c 39 e7 75 b3 49 83
c4 10 4d 39 fc 75 94 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc <0f> 0b eb a1
90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f
RSP: 0018:ffffc10bea13fc80 EFLAGS: 00010206
RAX: 000000000000010c RBX: ffff9bf5c7e66c00 RCX: 000000008020001d
RDX: 000000008020001e RSI: fffff175221f9900 RDI: ffff9bf5c7e67640
RBP: ffff9bf5c7e67600 R08: ffff9bf5c7e64400 R09: 000000008020001d
R10: 0000000040000000 R11: 0000000000000000 R12: ffff9bee4b1e8a18
R13: dead000000000122 R14: dead000000000100 R15: ffff9bee4b1e8a38
FS:  00007ff1e6d38740(0000) GS:ffff9bfd9fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005652044ecc68 CR3: 0000000889b5c005 CR4: 00000000001706e0
Call Trace:
  <TASK>
  ? __warn+0x80/0x130
  ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
  ? report_bug+0x195/0x1a0
  ? handle_bug+0x3c/0x70
  ? exc_invalid_op+0x14/0x70
  ? asm_exc_invalid_op+0x16/0x20
  ? ib_cq_pool_cleanup+0xac/0xb0 [ib_core]
  disable_device+0x9d/0x160 [ib_core]
  __ib_unregister_device+0x42/0xb0 [ib_core]
  ib_unregister_device+0x22/0x30 [ib_core]
  rvt_unregister_device+0x20/0x90 [rdmavt]
  hfi1_unregister_ib_device+0x16/0xf0 [hfi1]
  remove_one+0x55/0x1a0 [hfi1]
  pci_device_remove+0x36/0xa0
  device_release_driver_internal+0x193/0x200
  driver_detach+0x44/0x90
  bus_remove_driver+0x69/0xf0
  pci_unregister_driver+0x2a/0xb0
  hfi1_mod_cleanup+0xc/0x3c [hfi1]
  __do_sys_delete_module.constprop.0+0x17a/0x2f0
  ? exit_to_user_mode_prepare+0xc4/0xd0
  ? syscall_trace_enter.constprop.0+0x126/0x1a0
  do_syscall_64+0x5c/0x90
  ? syscall_exit_to_user_mode+0x12/0x30
  ? do_syscall_64+0x69/0x90
  ? syscall_exit_work+0x103/0x130
  ? syscall_exit_to_user_mode+0x12/0x30
  ? do_syscall_64+0x69/0x90
  ? exc_page_fault+0x65/0x150
  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7ff1e643f5ab
Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3
66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0
ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007ffec9103cc8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 00005615267fdc50 RCX: 00007ff1e643f5ab
RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00005615267fdcb8
RBP: 00005615267fdc50 R08: 0000000000000000 R09: 0000000000000000
R10: 00007ff1e659eac0 R11: 0000000000000206 R12: 00005615267fdcb8
R13: 0000000000000000 R14: 00005615267fdcb8 R15: 00007ffec9105ff8
  </TASK>
---[ end trace 0000000000000000 ]---

And...

restrack: ------------[ cut here ]------------
infiniband hfi1_0: BUG: RESTRACK detected leak of resources
restrack: Kernel PD object allocated by ib_isert is not freed
restrack: Kernel CQ object allocated by ib_core is not freed
restrack: Kernel QP object allocated by rdma_cm is not freed
restrack: ------------[ cut here ]------------

Fixes: 699826f4e30a ("IB/isert: Fix incorrect release of isert connection")
Reported-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Closes: https://lore.kernel.org/all/921cd1d9-2879-f455-1f50-0053fe6a6655@cornelisnetworks.com
Link: https://lore.kernel.org/r/a27982d3235005c58f6d321f3fad5eb6e1beaf9e.1692604607.git.leonro@nvidia.com
Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amba: bus: fix refcount leak

[ Upstream commit e312cbdc11305568554a9e18a2ea5c2492c183f3 ]

commit 5de1540b7bc4 ("drivers/amba: create devices from device tree")
increases the refcount of of_node, but not releases it in
amba_device_release, so there is refcount leak. By using of_node_put
to avoid refcount leak.

Fixes: 5de1540b7bc4 ("drivers/amba: create devices from device tree")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230821023928.3324283-1-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: tegra: handle clk prepare error in tegra_uart_hw_init()

[ Upstream commit 5abd01145d0cc6cd1b7c2fe6ee0b9ea0fa13671e ]

In tegra_uart_hw_init(), the return value of clk_prepare_enable() should
be checked since it might fail.

Fixes: e9ea096dd225 ("serial: tegra: add serial driver")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Link: https://lore.kernel.org/r/20230817105406.228674-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: bcm-voter: Use enable_maks for keepalive voting

[ Upstream commit 1a70ca71547be051769f0628aa09717694f508f0 ]

BCMs with an enable_mask expect to only have that specific value written
to them. The current implementation only works by miracle for BCMs with
enable mask == BIT(0), as the minimal vote we've been using so far just
so happens to be equal to that.

Use the correct value with keepalive voting.

Fixes: d8630f050d3f ("interconnect: qcom: Add support for mask-based BCMs")
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-2-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: bcm-voter: Improve enable_mask handling

[ Upstream commit a1f4170dec440f023601d57e49227b784074d218 ]

We don't need all the complex arithmetic for BCMs utilizing enable_mask,
as all we need to do is to determine whether there's any user (or
keepalive) asking for it to be on.

Separate the logic for such BCMs for a small speed boost.

Suggested-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-icc_fix_1he-v2-1-0620af8ac133@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 1a70ca71547b ("interconnect: qcom: bcm-voter: Use enable_maks for keepalive voting")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8450: Enable sync_state

[ Upstream commit 16862f1b2110eca6330e5be6d804e1a08e06a202 ]

Enable sync_state on sm8450 so that the interconnect votes actually mean
anything and aren't just pinned to INT_MAX.

Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_syncstate-v1-1-69ae5552a18b@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock

[ Upstream commit 1a1975551943f681772720f639ff42fbaa746212 ]

There is a long call chain that &fip->ctlr_lock is acquired by isr
fnic_isr_msix_wq_copy() under hard IRQ context. Thus other process context
code acquiring the lock should disable IRQ, otherwise deadlock could happen
if the IRQ preempts the execution while the lock is held in process context
on the same CPU.

[ISR]
fnic_isr_msix_wq_copy()
-> fnic_wq_copy_cmpl_handler()
-> fnic_fcpio_cmpl_handler()
-> fnic_fcpio_flogi_reg_cmpl_handler()
-> fnic_flush_tx()
-> fnic_send_frame()
-> fcoe_ctlr_els_send()
-> spin_lock_bh(&fip->ctlr_lock)

[Process Context]
1. fcoe_ctlr_timer_work()
-> fcoe_ctlr_flogi_send()
-> spin_lock_bh(&fip->ctlr_lock)

2. fcoe_ctlr_recv_work()
-> fcoe_ctlr_recv_handler()
-> fcoe_ctlr_recv_els()
-> fcoe_ctlr_announce()
-> spin_lock_bh(&fip->ctlr_lock)

3. fcoe_ctlr_recv_work()
-> fcoe_ctlr_recv_handler()
-> fcoe_ctlr_recv_els()
-> fcoe_ctlr_flogi_retry()
-> spin_lock_bh(&fip->ctlr_lock)

4. -> fcoe_xmit()
-> fcoe_ctlr_els_send()
-> spin_lock_bh(&fip->ctlr_lock)

spin_lock_bh() is not enough since fnic_isr_msix_wq_copy() is a
hardirq.

These flaws were found by an experimental static analysis tool I am
developing for irq-related deadlock.

The patch fix the potential deadlocks by spin_lock_irqsave() to disable
hard irq.

Fixes: 794d98e77f59 ("[SCSI] libfcoe: retry rejected FLOGI to another FCF if possible")
Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Link: https://lore.kernel.org/r/20230817074708.7509-1-dg573847474@gmail.com
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Use 32-bit hostnum in scsi_host_lookup()

[ Upstream commit 62ec2092095b678ff89ce4ba51c2938cd1e8e630 ]

Change scsi_host_lookup() hostnum argument type from unsigned short to
unsigned int to match the type used everywhere else.

Fixes: 6d49f63b415c ("[SCSI] Make host_no an unsigned int")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Link: https://lore.kernel.org/r/a02497e7-c12b-ef15-47fc-3f0a0b00ffce@cybernetics.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Prevent zero-length STAG registration

[ Upstream commit bb6d73d9add68ad270888db327514384dfa44958 ]

Currently irdma allows zero-length STAGs to be programmed in HW during
the kernel mode fast register flow. Zero-length MR or STAG registration
disable HW memory length checks.

Improve gaps in bounds checking in irdma by preventing zero-length STAG or
MR registrations except if the IB_PD_UNSAFE_GLOBAL_RKEY is set.

This addresses the disclosure CVE-2023-25775.

Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Christopher Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230818144838.1758-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: trbe: Fix TRBE potential sleep in atomic context

[ Upstream commit c0a232f1e19e378c5c4e5973a996392942c80090 ]

smp_call_function_single() will allocate an IPI interrupt vector to
the target processor and send a function call request to the interrupt
vector. After the target processor receives the IPI interrupt, it will
execute arm_trbe_remove_coresight_cpu() call request in the interrupt
handler.

According to the device_unregister() stack information, if other process
is useing the device, the down_write() may sleep, and trigger deadlocks
or unexpected errors.

  arm_trbe_remove_coresight_cpu
    coresight_unregister
      device_unregister
        device_del
          kobject_del
            __kobject_del
              sysfs_remove_dir
                kernfs_remove
                  down_write ---------> it may sleep

Add a helper arm_trbe_disable_cpu() to disable TRBE precpu irq and reset
per TRBE.
Simply call arm_trbe_remove_coresight_cpu() directly without useing the
smp_call_function_single(), which is the same as registering the TRBE
coresight device.

Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Link: https://lore.kernel.org/r/20230814093813.19152-2-hejunhao3@huawei.com
[ Remove duplicate cpumask checks during removal ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[ v3 - Remove the operation of assigning NULL to cpudata->drvdata ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230818084052.10116-1-hejunhao3@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup:namespace: Remove unused cgroup_namespaces_init()

[ Upstream commit 82b90b6c5b38e457c7081d50dff11ecbafc1e61a ]

cgroup_namspace_init() just return 0. Therefore, there is no need to
call it during start_kernel. Just remove it.

Fixes: a79a908fd2b0 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "f2fs: fix to do sanity check on extent cache correctly"

[ Upstream commit 958ccbbf1ce716d77c7cfa79ace50a421c1eed73 ]

syzbot reports a f2fs bug as below:

UBSAN: array-index-out-of-bounds in fs/f2fs/f2fs.h:3275:19
index 1409 is out of range for type '__le32[923]' (aka 'unsigned int[923]')
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
inline_data_addr fs/f2fs/f2fs.h:3275 [inline]
__recover_inline_status fs/f2fs/inode.c:113 [inline]
do_read_inode fs/f2fs/inode.c:480 [inline]
f2fs_iget+0x4730/0x48b0 fs/f2fs/inode.c:604
f2fs_fill_super+0x640e/0x80c0 fs/f2fs/super.c:4601
mount_bdev+0x276/0x3b0 fs/super.c:1391
legacy_get_tree+0xef/0x190 fs/fs_context.c:611
vfs_get_tree+0x8c/0x270 fs/super.c:1519
do_new_mount+0x28f/0xae0 fs/namespace.c:3335
do_mount fs/namespace.c:3675 [inline]
__do_sys_mount fs/namespace.c:3884 [inline]
__se_sys_mount+0x2d9/0x3c0 fs/namespace.c:3861
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue was bisected to:

commit d48a7b3a72f121655d95b5157c32c7d555e44c05
Author: Chao Yu <chao@kernel.org>
Date: Mon Jan 9 03:49:20 2023 +0000

f2fs: fix to do sanity check on extent cache correctly

The root cause is we applied both v1 and v2 of the patch, v2 is the right
fix, so it needs to revert v1 in order to fix reported issue.

v1:
commit d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly")
https://lore.kernel.org/lkml/20230109034920.492914-1-chao@kernel.org/

v2:
commit 269d11948100 ("f2fs: fix to do sanity check on extent cache correctly")
https://lore.kernel.org/lkml/20230207134808.1827869-1-chao@kernel.org/

Reported-by: syzbot+601018296973a481f302@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000fcf0690600e4d04d@google.com/
Fixes: d48a7b3a72f1 ("f2fs: fix to do sanity check on extent cache correctly")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: Only lfs mode is allowed with zoned block device feature

[ Upstream commit 2bd4df8fcbc72f58ce3c62ed021ab291ca42de0b ]

Now f2fs support four block allocation modes: lfs, adaptive,
fragment:segment, fragment:block. Only lfs mode is allowed with zoned block
device feature.

Fixes: 6691d940b0e0 ("f2fs: introduce fragment allocation mode mount option")
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: judge whether discard_unit is section only when have CONFIG_BLK_DEV_ZONED

[ Upstream commit b5a711acab305e04278c136c841ba37c589c16a1 ]

The current logic, regardless of whether CONFIG_BLK_DEV_ZONED
is enabled or not, will judge whether discard_unit is SECTION,
when f2fs_sb_has_blkzoned.

In fact, when CONFIG_BLK_DEV_ZONED is not enabled, this judgment
is a path that will never be accessed. At this time, -EINVAL will
be returned in the parse_options function, accompanied by the
message "Zoned block device support is not enabled".

Let's wrap this discard_unit judgment with CONFIG_BLK_DEV_ZONED.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 2bd4df8fcbc7 ("f2fs: Only lfs mode is allowed with zoned block device feature")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid mmap vs set_compress_option case

[ Upstream commit b5ab3276eb69cacf44ecfb11b2bfab73096ff4e4 ]

Compression option in inode should not be changed after they have
been used, however, it may happen in below race case:

Thread A Thread B
- f2fs_ioc_set_compress_option
- check f2fs_is_mmap_file()
- check get_dirty_pages()
- check F2FS_HAS_BLOCKS()
- f2fs_file_mmap
- set_inode_flag(FI_MMAP_FILE)
- fault
- do_page_mkwrite
  - f2fs_vm_page_mkwrite
  - f2fs_get_block_locked
- fault_dirty_shared_page
  - set_page_dirty
- update i_compress_algorithm
- update i_log_cluster_size
- update i_cluster_size

Avoid such race condition by covering f2fs_file_mmap() w/ i_sem lock,
meanwhile add mmap file check condition in f2fs_may_compress() as well.

Fixes: e1e8debec656 ("f2fs: add F2FS_IOC_SET_COMPRESS_OPTION ioctl")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: rdacm21: Fix uninitialized value

[ Upstream commit 33c7ae8f49e3413c81e879e1fdfcea4c5516e37b ]

Fix the following smatch warning:

drivers/media/i2c/rdacm21.c:373 ov10640_check_id() error: uninitialized
symbol 'val'.

Initialize 'val' to 0 in the ov10640_check_id() function.

Fixes: 2b821698dc73 ("media: i2c: rdacm21: Power up OV10640 before OV490")
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix regulators being left enabled on ov2680_power_on() errors

[ Upstream commit 84b4bd7e0d98166aa32fd470e672721190492eae ]

When the ov2680_power_on() "sensor soft reset failed" path is hit during
probe() the WARN() about putting an enabled regulator at
drivers/regulator/core.c:2398 triggers 3 times (once for each regulator),
filling dmesg with backtraces.

Fix this by properly disabling the regulators on ov2680_power_on() errors.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY not working

[ Upstream commit c0e97a4b4f20639f74cd5809b42ba6cbf9736a7d ]

ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY was getting
the try_fmt v4l2_mbus_framefmt struct from the passed in sd_state
and then storing the contents of that into the return by reference
format->format struct.

While the right thing to do would be filling format->format based on
the just looked up mode and then store the results of that in
sd_state->pads[0].try_fmt .

Before the previous change introducing ov2680_fill_format() this
resulted in ov2680_set_fmt() which == V4L2_SUBDEV_FORMAT_TRY always
returning the zero-ed out sd_state->pads[0].try_fmt in format->format
breaking callers using this.

After the introduction of ov2680_fill_format() which at least
initializes sd_state->pads[0].try_fmt properly, format->format
is now always being filled with the default 800x600 mode set by
ov2680_init_cfg() independent of the actual requested mode.

Move the filling of format->format with ov2680_fill_format() to
before the if (which == V4L2_SUBDEV_FORMAT_TRY) and then store
the filled in format->format in sd_state->pads[0].try_fmt to
fix this.

Note this removes the fmt local variable because IMHO having a local
variable which points to a sub-struct of one of the function arguments
just leads to confusion when reading the code.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Add ov2680_fill_format() helper function

[ Upstream commit 6d6849b2203f3244b575ba01d3e41ee19aa2cadf ]

Add a ov2680_fill_format() helper function and use this everywhere were
a v4l2_mbus_framefmt struct needs to be filled in so that the driver always
fills it consistently.

This is a preparation patch for fixing ov2680_set_fmt()
which == V4L2_SUBDEV_FORMAT_TRY calls not properly filling in
the passed in v4l2_mbus_framefmt struct.

Note that for ov2680_init_cfg() this now simply always fills
the try_fmt struct of the passed in sd_state. This is correct because
ov2680_init_cfg() is never called with a NULL sd_state so the old
sd_state check is not necessary.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Don't take the lock for try_fmt calls

[ Upstream commit e521b9cc1a49de677f4fc65909ce4877fbf7b113 ]

On ov2680_set_fmt() calls with format->which == V4L2_SUBDEV_FORMAT_TRY,
ov2680_set_fmt() does not talk to the sensor.

So in this case there is no need to lock the sensor->lock mutex or
to check that the sensor is streaming.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Remove VIDEO_V4L2_SUBDEV_API ifdef-s

[ Upstream commit 49c282d5a8c5f4d1d9088622bec792294c716010 ]

VIDEO_V4L2_SUBDEV_API is now automatically selected in Kconfig
for all sensor drivers. Remove the ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
checks.

This is a preparation patch for fixing ov2680_set_fmt()
which == V4L2_SUBDEV_FORMAT_TRY calls not properly filling in
the passed in v4l2_mbus_framefmt struct.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix vflip / hflip set functions

[ Upstream commit d5d08ad330c9ccebc5e066fda815423a290f48b0 ]

ov2680_vflip_disable() / ov2680_hflip_disable() pass BIT(0) instead of
0 as value to ov2680_mod_reg().

While fixing this also:

1. Stop having separate enable/disable functions for hflip / vflip
2. Move the is_streaming check, which is unique to hflip / vflip
into the ov2680_set_?flip() functions.

for a nice code cleanup.

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Fix ov2680_bayer_order()

[ Upstream commit 50a7bad4e0a37d7018ab6fe843dd84bc6b2ecf72 ]

The index into ov2680_hv_flip_bayer_order[] should be 0-3, but
ov2680_bayer_order() was using 0 + BIT(2) + (BIT(2) << 1) as
max index, while the intention was to use: 0 + 1 + 2 as max index.

Fix the index calculation in ov2680_bayer_order(), while at it
also just use the ctrl values rather then reading them back using
a slow i2c-read transaction.

This also allows making the function void, since there now are
no more i2c-reads to error check.

Note the check for the ctrls being NULL is there to allow
adding an ov2680_fill_format() helper later, which will call
ov2680_set_bayer_order() during probe() before the ctrls are created.

[Sakari Ailus: Change all users of ov2680_set_bayer_order() here]

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2680: Remove auto-gain and auto-exposure controls

[ Upstream commit 7b5a42e6ae71927359ea67a2c22570ba97fa4059 ]

Quoting the OV2680 datasheet:

"3.2 exposure and gain control

In the OV2680, the exposure time and gain are set manually from an external
controller. The OV2680 supports manual gain and exposure control only for
normal applications, no auto mode."

And indeed testing with the atomisp_ov2680 fork of ov2680.c has shown that
auto-exposure and auto-gain do not work.

Note that the code setting the auto-exposure flag was broken, callers
of ov2680_exposure_set() were directly passing !!ctrls->auto_exp->val as
"bool auto_exp" value, but ctrls->auto_exp is a menu control with:

enum  v4l2_exposure_auto_type {
        V4L2_EXPOSURE_AUTO = 0,
        V4L2_EXPOSURE_MANUAL = 1,
...

So instead of passing !!ctrls->auto_exp->val they should have been passing
ctrls->auto_exp->val == V4L2_EXPOSURE_AUTO, iow the passed value was
inverted of what it should have been.

Also remove ov2680_g_volatile_ctrl() since without auto support the gain
and exposure controls are not volatile.

This also fixes the control values not being properly applied in
ov2680_mode_set(). The 800x600 mode register-list also sets gain,
exposure and vflip overriding the last set ctrl values.

ov2680_mode_set() does call ov2680_gain_set() and ov2680_exposure_set()
but did this before writing the mode register-list, so these values
would still be overridden by the mode register-list.

Add a v4l2_ctrl_handler_setup() call after writing the mode register-list
to restore all ctrl values. Also remove the ctrls->gain->is_new check from
ov2680_gain_set() so that the gain always gets restored properly.

Last since ov2680_mode_set() now calls v4l2_ctrl_handler_setup(), remove
the v4l2_ctrl_handler_setup() call after ov2680_mode_restore() since
ov2680_mode_restore() calls ov2680_mode_set().

Fixes: 3ee47cad3e69 ("media: ov2680: Add Omnivision OV2680 sensor driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: ov2680: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips

[ Upstream commit 66274280b2c745d380508dc27b9a4dfd736e5eda ]

The driver changes the Bayer order based on the flips, but
does not define the control correctly with the
V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 7b5a42e6ae71 ("media: ov2680: Remove auto-gain and auto-exposure controls")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Fix initial RESETB state and annotate timings

[ Upstream commit a210df337c5f5c2cd82f36c9dbb154ec63365c80 ]

The initial state of RESETB input signal of OV5640 should be
asserted, i.e. the sensor should be in reset. This is not the
case, make it so.

Since the subsequent assertion of RESETB signal is no longer
necessary and the timing of the power sequencing could be
slightly adjusted, add annotations to the delays which match
OV5640 datasheet rev. 2.03, both:
figure 2-3 power up timing with internal DVDD
figure 2-4 power up timing with external DVDD source

The 5..10ms delay between PWDN assertion and RESETB assertion
is not even documented in the power sequencing diagram, and
with this reset fix, it is no longer even necessary.

Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver")
Reported-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: Enable MIPI interface in ov5640_set_power_mipi()

[ Upstream commit 98cb72d3b9c5e03b10fa993752ecfcbd9c572d8c ]

Set OV5640_REG_IO_MIPI_CTRL00 bit 2 to 1 instead of 0, since 1 means
MIPI CSI2 interface, while 0 means CPI parallel interface.

In the ov5640_set_power_mipi() the interface should obviously be set
to MIPI CSI2 since this functions is used to power up the sensor when
operated in MIPI CSI2 mode. The sensor should not be in CPI mode in
that case.

This fixes a corner case where capturing the first frame on i.MX8MN
with CSI/ISI resulted in corrupted frame.

Fixes: aa4bb8b8838f ("media: ov5640: Re-work MIPI startup sequence")
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> # [Test on imx6q]
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Jai Luthra <j-luthra@ti.com> # [Test on bplay, sk-am62]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: input: Support devices sending Eraser without Invert

[ Upstream commit 276e14e6c3993317257e1787e93b7166fbc30905 ]

Some digitizers (notably XP-Pen Artist 24) do not report the Invert
usage when erasing.  This causes the device to be permanently stuck with
the BTN_TOOL_RUBBER tool after sending Eraser, as Invert is the only
usage that can release the tool.  In this state, Touch and Inrange are
no longer reported to userspace, rendering the pen unusable.

Prior to commit 87562fcd1342 ("HID: input: remove the need for
HID_QUIRK_INVERT"), BTN_TOOL_RUBBER was never set and Eraser events were
simply translated into BTN_TOUCH without causing an inconsistent state.

Introduce HID_QUIRK_NOINVERT for such digitizers and detect them during
hidinput_configure_usage().  This quirk causes the tool to be released
as soon as Eraser is reported as not set.  Set BTN_TOOL_RUBBER in
input->keybit when mapping Eraser.

Fixes: 87562fcd1342 ("HID: input: remove the need for HID_QUIRK_INVERT")
Co-developed-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Nils Fuhler <nils@nilsfuhler.de>
Signed-off-by: Illia Ostapyshyn <ostapyshyn@sra.uni-hannover.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: base: Free devm resources when unregistering a device

[ Upstream commit 699fb50d99039a50e7494de644f96c889279aca3 ]

In the current code, devres_release_all() only gets called if the device
has a bus and has been probed.

This leads to issues when using bus-less or driver-less devices where
the device might never get freed if a managed resource holds a reference
to the device. This is happening in the DRM framework for example.

We should thus call devres_release_all() in the device_del() function to
make sure that the device-managed actions are properly executed when the
device is unregistered, even if it has neither a bus nor a driver.

This is effectively the same change than commit 2f8d16a996da ("devres:
release resources on device_del()") that got reverted by commit
a525a3ddeaca ("driver core: free devres in device_release") over
memory leaks concerns.

This patch effectively combines the two commits mentioned above to
release the resources both on device_del() and device_release() and get
the best of both worlds.

Fixes: a525a3ddeaca ("driver core: free devres in device_release")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230720-kunit-devm-inconsistencies-test-v3-3-6aa7e074f373@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: gadget: f_mass_storage: Fix unused variable warning

[ Upstream commit 55c3e571d2a0aabef4f1354604443f1c415d2e85 ]

Fix a "variable set but not used" warning in f_mass_storage.c. rc is
used if verbose debugging is enabled but not otherwise.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: d5e2b67aae79 ("USB: g_mass_storage: template f_mass_storage.c file created")
Link: https://lore.kernel.org/r/cfed16c7-aa46-494b-ba84-b0e0dc99be3a@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: gadget: core: Add missing kerneldoc for vbus_work

[ Upstream commit 159a98afc88e88f588077afe818081d67f50a5e0 ]

Add a missing kerneldoc description of the vbus_work field in struct usb_udc.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 50966da807c8 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing")
Link: https://lore.kernel.org/r/1e5e7cda-b2c8-4917-9952-4354f365ede0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

docs: ABI: fix spelling/grammar in SBEFIFO timeout interface

[ Upstream commit 2cd9ec2a51474d4c0b4d2a061f2de7da34eff476 ]

Correct spelling problems as identified by codespell.
Correct one grammar error.

Fixes: 9a93de620e0a ("docs: ABI: testing: Document the SBEFIFO timeout interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20230710052305.29611-1-rdunlap@infradead.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: hfi_venus: Only consider sys_idle_indicator on V1

[ Upstream commit 6283e4834c69fa93a108efa18c6aa09c7e626f49 ]

As per information from Qualcomm [1], this property is not really
supported beyond msm8916 (HFI V1) and some newer HFI versions really
dislike receiving it, going as far as crashing the device.

Only consider toggling it (via the module option) on HFIV1.
While at it, get rid of the global static variable (which defaulted
to zero) which was never explicitly assigned to for V1.

Note: [1] is a reply to the actual message in question, as lore did not
properly receive some of the emails..

[1] https://lore.kernel.org/lkml/955cd520-3881-0c22-d818-13fe9a47e124@linaro.org/
Fixes: 7ed9e0b3393c ("media: venus: hfi, vdec: v6 Add IS_V6() to existing IS_V4() if locations")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: go7007: Remove redundant if statement

[ Upstream commit f33cb49081da0ec5af0888f8ecbd566bd326eed1 ]

The if statement that compares msgs[i].len != 3 is always false because
it is in a code block where msg[i].len is equal to 3. The check is
redundant and can be removed.

As detected by cppcheck static analysis:
drivers/media/usb/go7007/go7007-i2c.c:168:20: warning: Opposite inner
'if' condition leads to a dead code block. [oppositeInnerCondition]

Link: https://lore.kernel.org/linux-media/20230727174007.635572-1-colin.i.king@gmail.com
Fixes: 866b8695d67e ("Staging: add the go7007 video driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec: core: add adap_unconfigured() callback

[ Upstream commit 948a77aaecf202f722cf2264025f9987e5bd5c26 ]

The adap_configured() callback was called with the adap->lock mutex
held if the 'configured' argument was false, and without the adap->lock
mutex held if that argument was true.

That was very confusing, and so split this up in a adap_unconfigured()
callback and a high-level configured() callback.

This also makes it easier to understand when the mutex is held: all
low-level adap_* callbacks are called with the mutex held. All other
callbacks are called without that mutex held.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f1b57164305d ("media: cec: add optional adap_configured callback")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec: core: add adap_nb_transmit_canceled() callback

[ Upstream commit da53c36ddd3f118a525a04faa8c47ca471e6c467 ]

A potential deadlock was found by Zheng Zhang with a local syzkaller
instance.

The problem is that when a non-blocking CEC transmit is canceled by calling
cec_data_cancel, that in turn can call the high-level received() driver
callback, which can call cec_transmit_msg() to transmit a new message.

The cec_data_cancel() function is called with the adap->lock mutex held,
and cec_transmit_msg() tries to take that same lock.

The root cause is that the received() callback can either be used to pass
on a received message (and then adap->lock is not held), or to report a
canceled transmit (and then adap->lock is held).

This is confusing, so create a new low-level adap_nb_transmit_canceled
callback that reports back that a non-blocking transmit was canceled.

And the received() callback is only called when a message is received,
as was the case before commit f9d0ecbf56f4 ("media: cec: correctly pass
on reply results") complicated matters.

Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f9d0ecbf56f4 ("media: cec: correctly pass on reply results")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: dell-sysman: Fix reference leak

[ Upstream commit 7295a996fdab7bf83dc3d4078fa8b139b8e0a1bf ]

If a duplicate attribute is found using kset_find_obj(),
a reference to that attribute is returned. This means
that we need to dispose it accordingly. Use kobject_put()
to dispose the duplicate attribute in such a case.

Compile-tested only.

Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230805053610.7106-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Fix to flush cache of PASID directory table

[ Upstream commit 8a3b8e63f8371c1247b7aa24ff9c5312f1a6948b ]

Even the PCI devices don't support pasid capability, PASID table is
mandatory for a PCI device in scalable mode. However flushing cache
of pasid directory table for these devices are not taken after pasid
table is allocated as the "size" of table is zero. Fix it by
calculating the size by page order.

Found this when reading the code, no real problem encountered for now.

Fixes: 194b3348bdbb ("iommu/vt-d: Fix PASID directory pointer coherency")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Link: https://lore.kernel.org/r/20230616081045.721873-1-yanfei.xu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/qcom: Disable and reset context bank before programming

[ Upstream commit 9f3fef23d9b5a858a6e6d5f478bb1b6b76265e76 ]

Writing the new TTBRs, TCRs and MAIRs on a previously enabled
context bank may trigger a context fault, resulting in firmware
driven AP resets: change the domain initialization programming
sequence to disable the context bank(s) and to also clear the
related fault address (CB_FAR) and fault status (CB_FSR)
registers before writing new values to TTBR0/1, TCR/TCR2, MAIR0/1.

Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622092742.74819-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fsi: aspeed: Reset master errors after CFAM reset

[ Upstream commit 52300909f4670ac552bfeb33c1355b896eac8c06 ]

It has been observed that sometimes the FSI master will return all 0xffs
after a CFAM has been taken out of reset, without presenting any error.
Resetting the FSI master errors resolves the issue.

Fixes: 4a851d714ead ("fsi: aspeed: Support CFAM reset GPIO")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20230612195657.245125-8-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/uverbs: Fix an potential error pointer dereference

[ Upstream commit 26b7d1a27167e7adf75b150755e05d2bc123ce55 ]

smatch reports the warning below:
drivers/infiniband/core/uverbs_std_types_counters.c:110
ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ() error: 'uattr'
dereferencing possible ERR_PTR()

The return value of uattr maybe ERR_PTR(-ENOENT), fix this by checking
the value of uattr before using it.

Fixes: ebb6796bd397 ("IB/uverbs: Add read counters support")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Link: https://lore.kernel.org/r/20230804022525.1916766-1-xiangyang3@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix CQ and QP cache affinity

[ Upstream commit 9e03dbea2b0634b21a45946b4f8097e0dc86ebe1 ]

Currently, the affinity between QP cache and CQ cache is not
considered when assigning QPN, it will affect the message rate of HW.

Allocate QPN from QP cache with better CQ affinity to get better
performance.

Fixes: 71586dd20010 ("RDMA/hns: Create QP with selected QPN for bank load balance")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix inaccurate error label name in init instance

[ Upstream commit c9c0bd3c177d93d80968f720304087ba83fe8f74 ]

This patch fixes inaccurate error label name in init instance.

Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix incorrect post-send with direct wqe of wr-list

[ Upstream commit 706efac4477cdb8be857f6322457de524acc02ff ]

Currently, direct wqe is not supported for wr-list. RoCE driver excludes
direct wqe for wr-list by judging whether the number of wr is 1.

For a wr-list where the second wr is a length-error atomic wr, the
post-send driver handles the first wr and adds 1 to the wr number counter
firstly. While handling the second wr, the driver finds out a length error
and terminates the wr handle process, remaining the counter at 1. This
causes the driver mistakenly judges there is only 1 wr and thus enters
the direct wqe process, carrying the current length-error atomic wqe.

This patch fixes the error by adding a judgement whether the current wr
is a bad wr. If so, use the normal doorbell process but not direct wqe
despite the wr number is 1.

Fixes: 01584a5edcc4 ("RDMA/hns: Add support of direct wqe")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix port active speed

[ Upstream commit df1bcf90a66a10967a3a43510b42cb3566208011 ]

HW supports a variety of different speed, but the current speed
is fixed.

The real speed should be querried from ethernet.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230804012711.808069-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sprd: Add missing force_aperture

[ Upstream commit d48a51286c698f7fe8efc688f23a532f4fe9a904 ]

force_aperture was intended to false only by GART drivers that have an
identity translation outside the aperture. This does not describe sprd, so
add the missing 'force_aperture = true'.

Fixes: b23e4fc4e3fa ("iommu: add Unisoc IOMMU basic driver")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/mediatek: Fix two IOMMU share pagetable issue

[ Upstream commit cf69ef46dbd980a0b1c956d668e066a73e0acd0f ]

Prepare for mt8188 to fix a two IOMMU HWs share pagetable issue.

We have two MM IOMMU HWs in mt8188, one is VPP-IOMMU, the other is
VDO-IOMMU. The 2 MM IOMMU HWs share pagetable don't work in this case:
a) VPP-IOMMU probe firstly.
b) VDO-IOMMU probe.
c) The master for VDO-IOMMU probe (means frstdata is vpp-iommu).
d) The master in another domain probe. No matter it is vdo or vpp.
Then it still create a new pagetable in step d). The problem is
"frstdata->bank[0]->m4u_dom" was not initialized. Then when d) enter, it
still create a new one.

In this patch, we create a new variable "share_dom" for this share
pgtable case, it should be helpful for readable. and put all the share
pgtable logic in the mtk_iommu_domain_finalise.

In mt8195, the master of VPP-IOMMU probes before than VDO-IOMMU
from its dtsi node sequence, we don't see this issue in it. Prepare for
mt8188.

Fixes: 645b87c190c9 ("iommu/mediatek: Fix 2 HW sharing pgtable issue")
Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20230602090227.7264-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data

[ Upstream commit 9ff894edd542618dad2fef538f8272c620a501db ]

Just remove a unused variable that only is for mtk_iommu_v1.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221018024258.19073-7-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: cf69ef46dbd9 ("iommu/mediatek: Fix two IOMMU share pagetable issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

extcon: cht_wc: add POWER_SUPPLY dependency

[ Upstream commit d20a3a8a32e3fa564ff25da860c5fc1a97642dfe ]

The driver fails to link when CONFIG_POWER_SUPPLY is disabled:

x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop':
extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event':
extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe':
extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register'

It should be possible to change the driver to not require this at
compile time and still provide other functions, but adding a hard
Kconfig dependency does not seem to have any practical downsides
and is simpler since the option is normally enabled anyway.

Fixes: 66e31186cd2aa ("extcon: intel-cht-wc: Add support for registering a power_supply class-device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernfs: add stub helper for kernfs_generic_poll()

[ Upstream commit 79038a99445f69c5d28494dd4f8c6f0509f65b2e ]

In some randconfig builds, kernfs ends up being disabled, so there is no prototype
for kernfs_generic_poll()

In file included from kernel/sched/build_utility.c:97:
kernel/sched/psi.c:1479:3: error: implicit declaration of function 'kernfs_generic_poll' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
kernfs_generic_poll(t->of, wait);
^

Add a stub helper for it, as we have it for other kernfs functions.

Fixes: aff037078ecae ("sched/psi: use kernfs polling functions for PSI trigger polling")
Fixes: 147e1a97c4a0b ("fs: kernfs: add poll file operation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230724121823.1357562-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Call dma_cleanup() on the test_remove path

[ Upstream commit f429378a9bf84d79a7e2cae05d2e3384cf7d68ba ]

When test_remove is enabled really_probe() does not properly pair
dma_configure() with dma_remove(), it will end up calling dma_configure()
twice. This corrupts the owner_cnt and renders the group unusable with
VFIO/etc.

Add the missing cleanup before going back to re_probe.

Fixes: 25f3bcfc54bc ("driver core: Add dma_cleanup callback in bus_type")
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Closes: https://lore.kernel.org/all/6472f254-c3c4-8610-4a37-8d9dfdd54ce8@huawei.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v2-4deed94e283e+40948-really_probe_dma_cleanup_jgg@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: test_async: fix an error code

[ Upstream commit 22d2381bbd70a5853c2ee77522f4965139672db9 ]

The test_platform_device_register_node() function should return error
pointers instead of NULL. That is what the callers are expecting.

Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1e11ed19-e1f6-43d8-b352-474134b7c008@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-buf/sync_file: Fix docs syntax

[ Upstream commit 05d56d8079d510a2994039470f65bea85f0075ee ]

Fixes the warning:

include/uapi/linux/sync_file.h:77: warning: Function parameter or member 'num_fences' not described in 'sync_file_info'

Fixes: 2d75c88fefb2 ("staging/android: refactor SYNC IOCTLs")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230724145000.125880-1-robdclark@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: qcm2290: Enable sync state

[ Upstream commit 4e048e9b7a160f7112069c0ec2947be15f3e8154 ]

Enable the generic .sync_state callback to ensure there are no
outstanding votes that would waste power.

Generally one would need a bunch of interface clocks to access the QoS
registers when trying to go over all possible nodes during sync_state,
but QCM2290 surprisingly does not seem to require any such handling.

Fixes: 1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230720-topic-qcm2290_icc-v2-2-a2ceb9d3e713@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: tmc: Explicit type conversions to prevent integer overflow

[ Upstream commit fd380097cdb305582b7a1f9476391330299d2c59 ]

Perf cs_etm session executed unexpectedly when AUX buffer > 1G.

perf record -C 0 -m ,2G -e cs_etm// -- <workload>
[ perf record: Captured and wrote 2.615 MB perf.data ]

Perf only collect about 2M perf data rather than 2G. This is becasuse
the operation, "nr_pages << PAGE_SHIFT", in coresight tmc driver, will
overflow when nr_pages >= 0x80000(correspond to 1G AUX buffer). The
overflow cause buffer allocation to fail, and TMC driver will alloc
minimal buffer size(1M). You can just get about 2M perf data(1M AUX
buffer + perf data header) at least.

Explicit convert nr_pages to 64 bit to avoid overflow.

Fixes: 22f429f19c41 ("coresight: etm-perf: Add support for ETR backend")
Fixes: 99443ea19e8b ("coresight: Add generic TMC sg table framework")
Fixes: 2e499bbc1a92 ("coresight: tmc: implementing TMC-ETF AUX space API")
Signed-off-by: Ruidong Tian <tianruidong@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230804081514.120171-2-tianruidong@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Replace one-element array with flexible-array member

[ Upstream commit 38313c6d2a02c28162e06753b01bd885caf9386d ]

One-element and zero-length arrays are deprecated. So, replace
one-element array in struct irdma_qvlist_info with flexible-array
member.

A patch for this was sent a while ago[1]. However, it seems that, at
the time, the changes were partially folded[2][3], and the actual
flexible-array transformation was omitted. This patch fixes that.

The only binary difference seen before/after changes is shown below:

|  drivers/infiniband/hw/irdma/hw.o
| @@ -868,7 +868,7 @@
| drivers/infiniband/hw/irdma/hw.c:484 (discriminator 2)
| size += struct_size(iw_qvlist, qv_info, rf->msix_count);
|      55b:      imul   $0x45c,%rdi,%rdi
|-     562:      add    $0x10,%rdi
|+     562:      add    $0x4,%rdi

which is, of course, expected as it reflects the mistake made
while folding the patch I've mentioned above.

Worth mentioning is the fact that with this change we save 12 bytes
of memory, as can be inferred from the diff snapshot above. Notice
that:

$ pahole -C rdma_qv_info idrivers/infiniband/hw/irdma/hw.o
struct irdma_qv_info {
u32                        v_idx;                /*     0     4 */
u16                        ceq_idx;              /*     4     2 */
u16                        aeq_idx;              /*     6     2 */
u8                         itr_idx;              /*     8     1 */

/* size: 12, cachelines: 1, members: 4 */
/* padding: 3 */
/* last cacheline: 12 bytes */
};

Link: https://lore.kernel.org/linux-hardening/20210525230038.GA175516@embeddedor/
Link: https://lore.kernel.org/linux-hardening/bf46b428deef4e9e89b0ea1704b1f0e5@intel.com/
Link: https://lore.kernel.org/linux-rdma/20210520143809.819-1-shiraz.saleem@intel.com/T/#u
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZMpsQrZadBaJGkt4@work
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly

[ Upstream commit 25dbc20deab5165f847b4eb42f376f725a986ee8 ]

The qedf_dbg_fp_int_cmd_read() function invokes sprintf() directly on a
__user pointer, which may crash the kernel.

Avoid doing that by vmalloc()'ating a buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.

Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-4-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Do not touch __user pointer in qedf_dbg_debug_cmd_read() directly

[ Upstream commit 31b5991a9a91ba97237ac9da509d78eec453ff72 ]

The qedf_dbg_debug_cmd_read() function invokes sprintf() directly on a
__user pointer, which may crash the kernel.

Avoid doing that by using a small on-stack buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.

Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-3-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly

[ Upstream commit 7d3d20dee4f648ec44e9717d5f647d594d184433 ]

The qedf_dbg_stop_io_on_error_cmd_read() function invokes sprintf()
directly on a __user pointer, which may crash the kernel.

Avoid doing that by using a small on-stack buffer for scnprintf() and then
calling simple_read_from_buffer() which does a proper copy_to_user() call.

Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Link: https://lore.kernel.org/lkml/20230724120241.40495-1-oleksandr@redhat.com/
Link: https://lore.kernel.org/linux-scsi/20230726101236.11922-1-skashyap@marvell.com/
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Rob Evers <revers@redhat.com>
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Jozef Bacik <jobacik@redhat.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Link: https://lore.kernel.org/r/20230731084034.37021-2-oleksandr@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix incomplete state save in rxe_requester

[ Upstream commit 5d122db2ff80cd2aed4dcd630befb56b51ddf947 ]

If a send packet is dropped by the IP layer in rxe_requester()
the call to rxe_xmit_packet() can fail with err == -EAGAIN.
To recover, the state of the wqe is restored to the state before
the packet was sent so it can be resent. However, the routines
that save and restore the state miss a significnt part of the
variable state in the wqe, the dma struct which is used to process
through the sge table. And, the state is not saved before the packet
is built which modifies the dma struct.

Under heavy stress testing with many QPs on a fast node sending
large messages to a slow node dropped packets are observed and
the resent packets are corrupted because the dma struct was not
restored. This patch fixes this behavior and allows the test cases
to succeed.

Fixes: 3050b9985024 ("IB/rxe: Fix race condition between requester and completer")
Link: https://lore.kernel.org/r/20230721200748.4604-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Split rxe_run_task() into two subroutines

[ Upstream commit dccb23f6c312e4480fe32ccbc2afac1a5cac7e5e ]

Split rxe_run_task(task, sched) into rxe_run_task(task) and
rxe_sched_task(task).

Link: https://lore.kernel.org/r/20221021200118.2163-5-rpearsonhpe@gmail.com
Signed-off-by: Ian Ziemba <ian.ziemba@hpe.com>
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 5d122db2ff80 ("RDMA/rxe: Fix incomplete state save in rxe_requester")
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/APM: drop the duplicate APM_MINOR_DEV macro

[ Upstream commit 4ba2909638a29630a346d6c4907a3105409bee7d ]

This source file already includes <linux/miscdevice.h>, which contains
the same macro. It doesn't need to be defined here again.

Fixes: 874bcd00f520 ("apm-emulation: move APM_MINOR_DEV to include/linux/miscdevice.h")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: x86@kernel.org
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20230728011120.759-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sprd: Fix DMA buffer leak issue

[ Upstream commit cd119fdc3ee1450fbf7f78862b5de44c42b6e47f ]

Release DMA buffer when _probe() returns failure to avoid memory leak.

Fixes: f4487db58eb7 ("serial: sprd: Add DMA mode support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230725064053.235448-2-chunyan.zhang@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sprd: Assign sprd_port after initialized to avoid wrong access

[ Upstream commit f9608f1887568b728839d006024585ab02ef29e5 ]

The global pointer 'sprd_port' may not zero when sprd_probe returns
failure, that is a risk for sprd_port to be accessed afterward, and
may lead to unexpected errors.

For example:

There are two UART ports, UART1 is used for console and configured in
kernel command line, i.e. "console=";

The UART1 probe failed and the memory allocated to sprd_port[1] was
released, but sprd_port[1] was not set to NULL;

In UART2 probe, the same virtual address was allocated to sprd_port[2],
and UART2 probe process finally will go into sprd_console_setup() to
register UART1 as console since it is configured as preferred console
(filled to console_cmdline[]), but the console parameters (sprd_port[1])
belong to UART2.

So move the sprd_port[] assignment to where the port already initialized
can avoid the above issue.

Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20230725064053.235448-1-chunyan.zhang@unisoc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: accel: adxl313: Fix adxl313_i2c_id[] table

[ Upstream commit f636554c4cd1c644109cc525900a056495b86cc9 ]

The .driver_data in adxl313_i2c_id[] for adxl312 and adxl314 is
wrong. Fix this issue by adding corresponding adxl31x_chip_info
data.

Reported-by: Jonathan Cameron <jic23@kernel.org>
Closes: https://lore.kernel.org/all/20230722172832.04ad7738@jic23-huawei
Fixes: a7a1c60bc4c9 ("drivers: iio: accel: adxl312 and adxl314 support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230725171624.331283-2-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla4xxx: Add length check when parsing nlattrs

[ Upstream commit 47cd3770e31df942e2bb925a9a855c79ed0662eb ]

There are three places that qla4xxx parses nlattrs:

- qla4xxx_set_chap_entry()

- qla4xxx_iface_set_param()

- qla4xxx_sysfs_ddb_set_param()

and each of them directly converts the nlattr to specific pointer of
structure without length checking. This could be dangerous as those
attributes are not validated and a malformed nlattr (e.g., length 0) could
result in an OOB read that leaks heap dirty data.

Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.

Fixes: 26ffd7b45fe9 ("[SCSI] qla4xxx: Add support to set CHAP entries")
Fixes: 1e9e2be3ee03 ("[SCSI] qla4xxx: Add flash node mgmt support")
Fixes: 00c31889f751 ("[SCSI] qla4xxx: fix data alignment and use nl helpers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723080053.3714534-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: be2iscsi: Add length check when parsing nlattrs

[ Upstream commit ee0268f230f66cb472df3424f380ea668da2749a ]

beiscsi_iface_set_param() parses nlattr with nla_for_each_attr and assumes
every attributes can be viewed as struct iscsi_iface_param_info.

This is not true because there is no any nla_policy to validate the
attributes passed from the upper function iscsi_set_iface_params().

Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails.

Fixes: 0e43895ec1f4 ("[SCSI] be2iscsi: adding functionality to change network settings using iscsiadm")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723075938.3713864-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()

[ Upstream commit ce51c817008450ef4188471db31639d42d37a5e1 ]

The functions iscsi_if_set_param() and iscsi_if_set_host_param() convert an
nlattr payload to type char* and then call C string handling functions like
sscanf and kstrdup:

  char *data = (char*)ev + sizeof(*ev);
  ...
  sscanf(data, "%d", &value);

However, since the nlattr is provided by the user-space program and the
nlmsg skb is allocated with GFP_KERNEL instead of GFP_ZERO flag (see
netlink_alloc_large_skb() in netlink_sendmsg()), dirty data on the heap can
lead to an OOB access for those string handling functions.

By investigating how the bug is introduced, we find it is really
interesting as the old version parsing code starting from commit
fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up") treated
the nlattr as integer bytes instead of string and had length check in
iscsi_copy_param():

  if (ev->u.set_param.len != sizeof(uint32_t))
    BUG();

But, since the commit a54a52caad4b ("[SCSI] iscsi: fixup set/get param
functions"), the code treated the nlattr as C string while forgetting to
add any strlen checks(), opening the possibility of an OOB access.

Fix the potential OOB by adding the strlen() check before accessing the
buf. If the data passes this check, all low-level set_param handlers can
safely treat this buf as legal C string.

Fixes: fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up")
Fixes: 1d9bf13a9cf9 ("[SCSI] iscsi class: add iscsi host set param event")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230723075820.3713119-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Add length check for nlattr payload

[ Upstream commit 971dfcb74a800047952f5288512b9c7ddedb050a ]

The current NETLINK_ISCSI netlink parsing loop checks every nlmsg to make
sure the length is bigger than sizeof(struct iscsi_uevent) and then calls
iscsi_if_recv_msg().

  nlh = nlmsg_hdr(skb);
  if (nlh->nlmsg_len < sizeof(*nlh) + sizeof(*ev) ||
    skb->len < nlh->nlmsg_len) {
    break;
  }
  ...
  err = iscsi_if_recv_msg(skb, nlh, &group);

Hence, in iscsi_if_recv_msg() the nlmsg_data can be safely converted to
iscsi_uevent as the length is already checked.

However, in other cases the length of nlattr payload is not checked before
the payload is converted to other data structures. One example is
iscsi_set_path() which converts the payload to type iscsi_path without any
checks:

  params = (struct iscsi_path *)((char *)ev + sizeof(*ev));

Whereas iscsi_if_transport_conn() correctly checks the pdu_len:

  pdu_len = nlh->nlmsg_len - sizeof(*nlh) - sizeof(*ev);
  if ((ev->u.send_pdu.hdr_size > pdu_len) ..
    err = -EINVAL;

To sum up, some code paths called in iscsi_if_recv_msg() do not check the
length of the data (see below picture) and directly convert the data to
another data structure. This could result in an out-of-bound reads and heap
dirty data leakage.

             _________  nlmsg_len(nlh) _______________
            /                                         \
+----------+--------------+---------------------------+
| nlmsghdr | iscsi_uevent |          data              |
+----------+--------------+---------------------------+
                          \                          /
                         iscsi_uevent->u.set_param.len

Fix the issue by adding the length check before accessing it. To clean up
the code, an additional parameter named rlen is added. The rlen is
calculated at the beginning of iscsi_if_recv_msg() which avoids duplicated
calculation.

Fixes: ac20c7bf070d ("[SCSI] iscsi_transport: Added Ping support")
Fixes: 43514774ff40 ("[SCSI] iscsi class: Add new NETLINK_ISCSI messages for cnic/bnx2i driver.")
Fixes: 1d9bf13a9cf9 ("[SCSI] iscsi class: add iscsi host set param event")
Fixes: 01cb225dad8d ("[SCSI] iscsi: add target discvery event to transport class")
Fixes: 264faaaa1254 ("[SCSI] iscsi: add transport end point callbacks")
Fixes: fd7255f51a13 ("[SCSI] iscsi: add sysfs attrs for uspace sync up")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230725024529.428311-1-linma@zju.edu.cn
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Rename iscsi_set_param() to iscsi_if_set_param()

[ Upstream commit 0c26a2d7c98039e913e63f9250fde738a3f88a60 ]

There are two iscsi_set_param() functions defined in libiscsi.c and
scsi_transport_iscsi.c respectively which is confusing.

Rename the one in scsi_transport_iscsi.c to iscsi_if_set_param().

Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221122181105.4123935-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 971dfcb74a80 ("scsi: iscsi: Add length check for nlattr payload")
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: RDMA/srp: Fix residual handling

[ Upstream commit 89e637c19b2441aabc8dbf22a8745b932fd6996e ]

Although the code for residual handling in the SRP initiator follows the
SCSI documentation, that documentation has never been correct. Because
scsi_finish_command() starts from the data buffer length and subtracts the
residual, scsi_set_resid() must not be called if a residual overflow
occurs. Hence remove the scsi_set_resid() calls from the SRP initiator if a
residual overflow occurrs.

Cc: Leon Romanovsky <leon@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 9237f04e12cc ("scsi: core: Fix scsi_get/set_resid() interface")
Fixes: e714531a349f ("IB/srp: Fix residual handling")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230724200843.3376570-3-bvanassche@acm.org
Acked-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()

[ Upstream commit 5eda42aebb7668b4dcff025cd3ccb0d3d7c53da6 ]

The function mxs_phy_is_otg_host() will return true if OTG_ID_VALUE is
0 at USBPHY_CTRL register. However, OTG_ID_VALUE will not reflect the real
state if the ID pin is float, such as Host-only or Type-C cases. The value
of OTG_ID_VALUE is always 1 which means device mode.
This patch will fix the issue by judging the current mode based on
last_event. The controller will update last_event in time.

Fixes: 7b09e67639d6 ("usb: phy: mxs: refine mxs_phy_disconnect_line")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230627110353.1879477-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: fix resource leaks in vdec_msg_queue_init()

[ Upstream commit cf10b0bb503c974ba049d6f888b21178be20a962 ]

If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;".  Normally, this is done
inside the vdec_msg_queue_deinit() function.  However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op.  For that situation, just
set the size to zero explicitly and return.

There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err.

Fixes: b199fe46f35c ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Fixes: 2f5d0aef37c6 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: fix potential double free

[ Upstream commit be40f524b6edac4fb9a98ef79620fd9b9497a998 ]

The "lat_buf->private_data" needs to be set to NULL to prevent a
double free. How this would happen is if vdec_msg_queue_init() failed
twice in a row and on the second time it failed earlier than on the
first time.

The vdec_msg_queue_init() function has a loop which does:
for (i = 0; i < NUM_BUFFER_COUNT; i++) {

Each iteration initializes one element in the msg_queue->lat_buf[] array
and then the clean up function vdec_msg_queue_deinit() frees each
element of the msg_queue->lat_buf[] array. This clean up code relies
on the assumption that every element is either initialized or zeroed.
Leaving a freed pointer which is non-zero breaks the assumption.

Fixes: b199fe46f35c ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mediatek: vcodec: Return NULL if no vdec_fb is found

[ Upstream commit dfa2d6e07432270330ae191f50a0e70636a4cd2b ]

"fb_use_list" is used to store used or referenced frame buffers for
vp9 stateful decoder. "NULL" should be returned when getting target
frame buffer failed from "fb_use_list", not a random unexpected one.

Fixes: f77e89854b3e ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: ensure the bitops don't cross boundaries

[ Upstream commit 5bd28eae48589694ff4e5badb03bf75dae695b3f ]

the supported_instance_count determine the instance index range,
it shouldn't exceed the bits number of instance_mask,
otherwise the bitops of instance_mask may cross boundaries

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix UNUSED_VALUE issue reported by coverity

[ Upstream commit cf6a06354989c41b536be8e094561ee16223cf1f ]

assign value '-EINVAL' to ret, but the stored value is overwritten
before it can be used

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix UNINIT issues reported by coverity

[ Upstream commit c224d0497a31ea2d173e1ea16af308945bff9037 ]

using uninitialized value may introduce risk

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix REVERSE_INULL issues reported by coverity

[ Upstream commit 79d3bafaecc13bccab1ebbd28a15e669c5a4cdaf ]

null-checking of a pointor is suggested before dereferencing it

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: fix CHECKED_RETURN issues reported by coverity

[ Upstream commit b237b058adbc7825da9c8f358f1ff3f0467d623a ]

calling "vpu_cmd_send/vpu_get_buffer_state/vpu_session_alloc_fs"
without checking return value

Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rkvdec: increase max supported height for H.264

[ Upstream commit f000e6ca2d60fefd02a180a57df2c4162fa0c1b7 ]

After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>