modpost: fix ishtp MODULE_DEVICE_TABLE built on big-endian host

[ Upstream commit ac96a15a0f0c8812a3aaa587b871cd5527f6d736 ]

When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().

For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.

If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
    MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");

However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
    MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");

This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.

The guid field must not be reversed because guid_t is an array of __u8.

Fixes: fa443bc3c1e4 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

modpost: fix tee MODULE_DEVICE_TABLE built on big-endian host

[ Upstream commit 7f54e00e5842663c2cea501bbbdfa572c94348a3 ]

When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().

For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.

If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
    MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");

However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:

    $ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
    MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");

The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.

This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).

The uuid field must not be reversed because uuid_t is an array of __u8.

Fixes: 0fc1db9d1059 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Only define __parse_fpscr() when required

[ Upstream commit c7e0d9bb9154c6e6b2ac8746faba27b53393f25e ]

Clang 17 reports:

arch/powerpc/kernel/traps.c:1167:19: error: unused function '__parse_fpscr' [-Werror,-Wunused-function]

__parse_fpscr() is called from two sites. First call is guarded
by #ifdef CONFIG_PPC_FPU_REGS

Second call is guarded by CONFIG_MATH_EMULATION which selects
CONFIG_PPC_FPU_REGS.

So only define __parse_fpscr() when CONFIG_PPC_FPU_REGS is defined.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309210327.WkqSd5Bq-lkp@intel.com/
Fixes: b6254ced4da6 ("powerpc/signal: Don't manage floating point regs when no FPU")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5de2998c57f3983563b27b39228ea9a7229d4110.1695385984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8350: Set ACV enable_mask

[ Upstream commit df1b8356a80ab47a7623e08facf36fe434ea9722 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: d26a56674497 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-11-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8350: Retire DEFINE_QBCM

[ Upstream commit edd13c04ff0d90ed152902a88f01f466c77a0cf9 ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-19-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: df1b8356a80a ("interconnect: qcom: sm8350: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8150: Set ACV enable_mask

[ Upstream commit 7ed42176406e5a2c9a5767d0d75690c7d1588027 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: a09b817c8bad ("interconnect: qcom: Add SM8150 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-9-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8150: Retire DEFINE_QBCM

[ Upstream commit 670699a4225b8cba6962f965b227e0175d09ecda ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-17-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 7ed42176406e ("interconnect: qcom: sm8150: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm8150: Drop IP0 interconnects

[ Upstream commit a532439199369b86cf7323f84d1946b7d0634c53 ]

Similar to the sdx55 and sc7180, let's drop the MASTER_IPA_CORE and
SLAVE_IPA_CORE interconnects for this platform. There are no actual users
of this interconnect. The IP0 resource will be handled by clk-rpmh
driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-5-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 7ed42176406e ("interconnect: qcom: sm8150: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: move ignore_list out of of_count_icc_providers()

[ Upstream commit 88387e21d224923eaa0074e3eef699a30f437e62 ]

Move the const ignore_list definition out of the
of_count_icc_providers() function. This prevents the following stack
frame size warnings if the list is expanded:

drivers/interconnect/core.c:1082:12: warning: stack frame size (1216) exceeds limit (1024) in 'of_count_icc_providers' [-Wframe-larger-than]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230109002935.244320-4-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 7ed42176406e ("interconnect: qcom: sm8150: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm6350: Set ACV enable_mask

[ Upstream commit fe7a3abf4111992af3de51d22383a8e8a0affe1e ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 6a6eff73a954 ("interconnect: qcom: Add SM6350 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-8-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sm6350: Retire DEFINE_QBCM

[ Upstream commit ab2c1cb5740a7d2240b40b7b494700078db4eb13 ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-16-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: fe7a3abf4111 ("interconnect: qcom: sm6350: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sdm845: Set ACV enable_mask

[ Upstream commit f8fe97a9fd2098de0570387029065eef657d50ee ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: b5d2f741077a ("interconnect: qcom: Add sdm845 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-7-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sdm845: Retire DEFINE_QBCM

[ Upstream commit 35f490c5e4e833e81be464d89404b26ee20740ef ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-13-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: f8fe97a9fd20 ("interconnect: qcom: sdm845: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc8280xp: Set ACV enable_mask

[ Upstream commit 688ffb3dcf85fc4b7ea82af842493013747a9e2c ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: f29dabda7917 ("interconnect: qcom: Add SC8280XP interconnect provider")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-5-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc8180x: Set ACV enable_mask

[ Upstream commit 0fcaaed3ff4b99e5b688b799f48989f1e4bb8a8b ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 9c8c6bac1ae8 ("interconnect: qcom: Add SC8180x providers")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-4-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc7280: Set ACV enable_mask

[ Upstream commit 437b8e7fcd5df792cb8b8095e9f6eccefec6c099 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 46bdcac533cc ("interconnect: qcom: Add SC7280 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-3-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc7180: Set ACV enable_mask

[ Upstream commit 1ad83c4792722fe134c1352591420702ff7b9091 ]

ACV expects an enable_mask corresponding to the APPS RSC, fill it in.

Fixes: 2d1f95ab9feb ("interconnect: qcom: Add SC7180 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-2-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: sc7180: Retire DEFINE_QBCM

[ Upstream commit e451b2ea5a11fb3f6d83e1f834ae6a5f55a02bba ]

The struct definition macros are hard to read and compare, expand them.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230811-topic-icc_retire_macrosd-v1-11-c03aaeffc769@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 1ad83c479272 ("interconnect: qcom: sc7180: Set ACV enable_mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()

[ Upstream commit 8b07c1fb0f1ad139373c8253f2fad8bc43fab07d ]

Otherwise, it may print random physical block address in tracepoint
of f2fs_map_blocks() as below:

f2fs_map_blocks: dev = (253,16), ino = 2297, file offset = 0, start blkaddr = 0xa356c421, len = 0x0, flags = 0

Fixes: c4020b2da4c9 ("f2fs: support F2FS_IOC_PRECACHE_EXTENTS")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()

[ Upstream commit 83c761f568733277ce1f7eb9dc9e890649c29a8c ]

If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().

Remove this erroneous BUG_ON().

It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')

Fixes: a57e16cf0333 ("dmaengine: pxa: add pxa dmaengine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c8fc5563c9593c914fde41f0f7d1489a21b45a9a.1696676782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: usbip: fix stub_dev hub disconnect

[ Upstream commit 97475763484245916735a1aa9a3310a01d46b008 ]

If a hub is disconnected that has device(s) that's attached to the usbip layer
the disconnect function might fail because it tries to release the port
on an already disconnected hub.

Fixes: 6080cd0e9239 ("staging: usbip: claim ports used by shared devices")
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230615092810.1215490-1-jonas.blixt@actia.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools: iio: iio_generic_buffer ensure alignment

[ Upstream commit 2d3dff577dd0ea8fe9637a13822f7603c4a881c8 ]

The iio_generic_buffer can return garbage values when the total size of
scan data is not a multiple of the largest element in the scan. This can be
demonstrated by reading a scan, consisting, for example of one 4-byte and
one 2-byte element, where the 4-byte element is first in the buffer.

The IIO generic buffer code does not take into account the last two
padding bytes that are needed to ensure that the 4-byte data for next
scan is correctly aligned.

Add the padding bytes required to align the next sample with the scan size.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: e58537ccce73 ("staging: iio: update example application.")
Link: https://lore.kernel.org/r/ZRvlm4ktNLu+qmlf@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: st_core: Do not call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 4d08c3d12b61022501989f9f071514d2d6f77c47 ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.

Fixes: 53618cc1e51e ("Staging: sources for ST core")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: edma: handle irq_of_parse_and_map() errors

[ Upstream commit 14f6d317913f634920a640e9047aa2e66f5bdcb7 ]

Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error.  So this check for valid IRQs should only
accept values > 0.

Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: chipidea: Simplify Tegra DMA alignment code

[ Upstream commit 2ae61a2562c0d1720545b0845829a65fb6a9c2c6 ]

The USB host on Tegra3 works with 32-bit alignment. Previous code tried
to align the buffer, but it did align the wrapper struct instead, so
the buffer was at a constant offset of 8 bytes (two pointers) from
expected alignment.  Since kmalloc() guarantees at least 8-byte
alignment already, the alignment-extending is removed.

Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/a0d917d492b1f91ee0019e68b8e8bca9c585393f.1695934946.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: chipidea: Fix DMA overwrite for Tegra

[ Upstream commit 7ab8716713c931ac79988f2592e1cf8b2e4fec1b ]

Tegra USB controllers seem to issue DMA in full 32-bit words only and thus
may overwrite unevenly-sized buffers.  One such occurrence is detected by
SLUB when receiving a reply to a 1-byte buffer (below).  Fix this by
allocating a bounce buffer also for buffers with sizes not a multiple of 4.

=============================================================================
BUG kmalloc-64 (Tainted: G    B             ): kmalloc Redzone overwritten
-----------------------------------------------------------------------------

0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc
Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41
 __kmem_cache_alloc_node+0x12f/0x1e4
 __kmalloc+0x33/0x8c
 usb_get_status+0x2b/0xac
 hub_probe+0x5e9/0xcec
 usb_probe_interface+0xbf/0x21c
 really_probe+0xa5/0x2c4
 __driver_probe_device+0x75/0x174
 driver_probe_device+0x31/0x94
 __device_attach_driver+0x65/0xc0
 bus_for_each_drv+0x4b/0x74
 __device_attach+0x69/0x120
 bus_probe_device+0x65/0x6c
 device_add+0x48b/0x5f8
 usb_set_configuration+0x37b/0x6b4
 usb_generic_driver_probe+0x37/0x68
 usb_probe_device+0x35/0xb4
Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0)
Object 0x8555cd00 @offset=3328 fp=0x00000000

Redzone  8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Object   8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc  ................
Redzone  8555cd40: cc cc cc cc                                      ....
Padding  8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a              ZZZZZZZZZZZZ
CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G    B              6.6.0-rc1mq-00118-g59786f827ea1 #1115
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: usb_hub_wq hub_event
[<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
[<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
[<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
[<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
[<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
[<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
[<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
[<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
[<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
[<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
[<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
[<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
usb 1-1: device descriptor read/8, error -71

Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/ef8466b834c1726f5404c95c3e192e90460146f8.1695934946.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency

[ Upstream commit ef307bc6ef04e8c1ea843231db58e3afaafa9fa6 ]

In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without
holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue():

    spin_lock_irqsave(&hsotg->lock, flags);
    ...
if (!urb->hcpriv) {
dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
goto out;
}
    rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv
    ...
out:
    spin_unlock_irqrestore(&hsotg->lock, flags);

When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are
concurrently executed, the NULL check of "urb->hcpriv" can be executed
before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used
in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL
pointer dereference.

This possible bug is found by an experimental static analysis tool
developed by myself. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations. The above possible
bug is reported, when my tool analyzes the source code of Linux 6.5.

To fix this possible bug, "urb->hcpriv = NULL" should be executed with
holding the lock "hsotg->lock". After using this patch, my tool never
reports the possible bug, with the kernelconfiguration allyesconfig for
x86_64. Because I have no associated hardware, I cannot test the patch
in runtime testing, and just verify it according to the code logic.

Fixes: 33ad261aa62b ("usb: dwc2: host: spinlock urb_enqueue")
Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn>
Link: https://lore.kernel.org/r/20230926024404.832096-1-baijiaju@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Register dsa_bus_type before registering idxd sub-drivers

[ Upstream commit 88928addeec577386e8c83b48b5bc24d28ba97fd ]

idxd sub-drivers belong to bus dsa_bus_type. Thus, dsa_bus_type must be
registered in dsa bus init before idxd drivers can be registered.

But the order is wrong when both idxd and idxd_bus are builtin drivers.
In this case, idxd driver is compiled and linked before idxd_bus driver.
Since the initcall order is determined by the link order, idxd sub-drivers
are registered in idxd initcall before dsa_bus_type is registered
in idxd_bus initcall. idxd initcall fails:

[   21.562803] calling  idxd_init_module+0x0/0x110 @ 1
[   21.570761] Driver 'idxd' was unable to register with bus_type 'dsa' because the bus was not initialized.
[   21.586475] initcall idxd_init_module+0x0/0x110 returned -22 after 15717 usecs
[   21.597178] calling  dsa_bus_init+0x0/0x20 @ 1

To fix the issue, compile and link idxd_bus driver before idxd driver
to ensure the right registration order.

Fixes: d9e5481fca74 ("dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone")
Reported-by: Michael Prinke <michael.prinke@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Tested-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20230924162232.1409454-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf record: Fix BTF type checks in the off-cpu profiling

[ Upstream commit 0e501a65d35bf72414379fed0e31a0b6b81ab57d ]

The BTF func proto for a tracepoint has one more argument than the
actual tracepoint function since it has a context argument at the
begining.  So it should compare to 5 when the tracepoint has 4
arguments.

  typedef void (*btf_trace_sched_switch)(void *, bool, struct task_struct *, struct task_struct *, unsigned int);

Also, recent change in the perf tool would use a hand-written minimal
vmlinux.h to generate BTF in the skeleton.  So it won't have the info
of the tracepoint.  Anyway it should use the kernel's vmlinux BTF to
check the type in the kernel.

Fixes: b36888f71c85 ("perf record: Handle argument change in sched_switch")
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Song Liu <song@kernel.org>
Cc: Hao Luo <haoluo@google.com>
CC: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230922234444.3115821-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzg2l: Make reverse order of enable() for disable()

[ Upstream commit dd462cf53e4dff0f4eba5e6650e31ceddec74c6f ]

We usually do reverse order of enable() for disable(). Currently, the
ordering of irq_chip_disable_parent() is not correct in
rzg2l_gpio_irq_disable(). Fix the incorrect order.

Fixes: db2e5f21a48e ("pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230918123355.262115-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

livepatch: Fix missing newline character in klp_resolve_symbols()

[ Upstream commit 67e18e132f0fd738f8c8cac3aa1420312073f795 ]

Without the newline character, the log may not be printed immediately
after the error occurs.

Fixes: ca376a937486 ("livepatch: Prevent module-specific KLP rela sections from referencing vmlinux symbols")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230914072644.4098857-1-zhengyejian1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: tty_jobctrl: fix pid memleak in disassociate_ctty()

[ Upstream commit 11e7f27b79757b6586645d87b95d5b78375ecdfc ]

There is a pid leakage:
------------------------------
unreferenced object 0xffff88810c181940 (size 224):
  comm "sshd", pid 8191, jiffies 4294946950 (age 524.570s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de  .............N..
    ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff  ....kkkk........
  backtrace:
    [<ffffffff814774e6>] kmem_cache_alloc+0x5c6/0x9b0
    [<ffffffff81177342>] alloc_pid+0x72/0x570
    [<ffffffff81140ac4>] copy_process+0x1374/0x2470
    [<ffffffff81141d77>] kernel_clone+0xb7/0x900
    [<ffffffff81142645>] __se_sys_clone+0x85/0xb0
    [<ffffffff8114269b>] __x64_sys_clone+0x2b/0x30
    [<ffffffff83965a72>] do_syscall_64+0x32/0x80
    [<ffffffff83a00085>] entry_SYSCALL_64_after_hwframe+0x61/0xc6

It turns out that there is a race condition between disassociate_ctty() and
tty_signal_session_leader(), which caused this leakage.

The pid memleak is triggered by the following race:
task[sshd]                     task[bash]
-----------------------        -----------------------
                               disassociate_ctty();
                               spin_lock_irq(&current->sighand->siglock);
                               put_pid(current->signal->tty_old_pgrp);
                               current->signal->tty_old_pgrp = NULL;
                               tty = tty_kref_get(current->signal->tty);
                               spin_unlock_irq(&current->sighand->siglock);
tty_vhangup();
tty_lock(tty);
...
tty_signal_session_leader();
spin_lock_irq(&p->sighand->siglock);
...
if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL
p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get
spin_unlock_irq(&p->sighand->siglock);
...
tty_unlock(tty);
                               if (tty) {
                                   tty_lock(tty);
                                   ...
                                   put_pid(tty->ctrl.pgrp);
                                   tty->ctrl.pgrp = NULL; //It's too late
                                   ...
                                   tty_unlock(tty);
                               }

The issue is believed to be introduced by commit c8bcd9c5be24 ("tty:
Fix ->session locking") who moves the unlock of siglock in
disassociate_ctty() above "if (tty)", making a small window allowing
tty_signal_session_leader() to kick in. It can be easily reproduced by
adding a delay before "if (tty)" and at the entrance of
tty_signal_session_leader().

To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after
"tty->ctrl.pgrp = NULL".

Fixes: c8bcd9c5be24 ("tty: Fix ->session locking")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20230831023329.165737-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: fix to avoid redundant compress extension

[ Upstream commit 7e1b150fece033703a824df1bbc03df091ea53cc ]

With below script, redundant compress extension will be parsed and added
by parse_options(), because parse_options() doesn't check whether the
extension is existed or not, fix it.

1. mount -t f2fs -o compress_extension=so /dev/vdb /mnt/f2fs
2. mount -t f2fs -o remount,compress_extension=so /mnt/f2fs
3. mount|grep f2fs

/dev/vdb on /mnt/f2fs type f2fs (...,compress_extension=so,compress_extension=so,...)

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Fixes: 151b1982be5d ("f2fs: compress: add nocompress extensions support")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: fix to avoid use-after-free on dic

[ Upstream commit b0327c84e91a0f4f0abced8cb83ec86a7083f086 ]

Call trace:
 __memcpy+0x128/0x250
 f2fs_read_multi_pages+0x940/0xf7c
 f2fs_mpage_readpages+0x5a8/0x624
 f2fs_readahead+0x5c/0x110
 page_cache_ra_unbounded+0x1b8/0x590
 do_sync_mmap_readahead+0x1dc/0x2e4
 filemap_fault+0x254/0xa8c
 f2fs_filemap_fault+0x2c/0x104
 __do_fault+0x7c/0x238
 do_handle_mm_fault+0x11bc/0x2d14
 do_mem_abort+0x3a8/0x1004
 el0_da+0x3c/0xa0
 el0t_64_sync_handler+0xc4/0xec
 el0t_64_sync+0x1b4/0x1b8

In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if
we hit cached page in compress_inode's cache, dic may be released, it needs
break the loop rather than continuing it, in order to avoid accessing
invalid dic pointer.

Fixes: 6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: fix deadloop in f2fs_write_cache_pages()

[ Upstream commit c5d3f9b7649abb20aa5ab3ebff9421a171eaeb22 ]

With below mount option and testcase, it hangs kernel.

1. mount -t f2fs -o compress_log_size=5 /dev/vdb /mnt/f2fs
2. touch /mnt/f2fs/file
3. chattr +c /mnt/f2fs/file
4. dd if=/dev/zero of=/mnt/f2fs/file bs=1MB count=1
5. sync
6. dd if=/dev/zero of=/mnt/f2fs/file bs=111 count=11 conv=notrunc
7. sync

INFO: task sync:4788 blocked for more than 120 seconds.
      Not tainted 6.5.0-rc1+ #322
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:sync            state:D stack:0     pid:4788  ppid:509    flags:0x00000002
Call Trace:
 <TASK>
 __schedule+0x335/0xf80
 schedule+0x6f/0xf0
 wb_wait_for_completion+0x5e/0x90
 sync_inodes_sb+0xd8/0x2a0
 sync_inodes_one_sb+0x1d/0x30
 iterate_supers+0x99/0xf0
 ksys_sync+0x46/0xb0
 __do_sys_sync+0x12/0x20
 do_syscall_64+0x3f/0x90
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

The reason is f2fs_all_cluster_page_ready() assumes that pages array should
cover at least one cluster, otherwise, it will always return false, result
in deadloop.

By default, pages array size is 16, and it can cover the case cluster_size
is equal or less than 16, for the case cluster_size is larger than 16, let's
allocate memory of pages array dynamically.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: convert f2fs_write_cache_pages() to use filemap_get_folios_tag()

[ Upstream commit 1cd98ee747cff120ee9b93988ddb7315d8d8f8e7 ]

Convert the function to use a folio_batch instead of pagevec.  This is in
preparation for the removal of find_get_pages_range_tag().

Also modified f2fs_all_cluster_page_ready to take in a folio_batch instead
of pagevec.  This does NOT support large folios.  The function currently
only utilizes folios of size 1 so this shouldn't cause any issues right
now.

This version of the patch limits the number of pages fetched to
F2FS_ONSTACK_PAGES.  If that ever happens, update the start index here
since filemap_get_folios_tag() updates the index to be after the last
found folio, not necessarily the last used page.

Link: https://lkml.kernel.org/r/20230104211448.4804-15-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: c5d3f9b7649a ("f2fs: compress: fix deadloop in f2fs_write_cache_pages()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

filemap: add filemap_get_folios_tag()

[ Upstream commit 247f9e1feef4e57911510c8f82348efb4491ea0e ]

This is the equivalent of find_get_pages_range_tag(), except for folios
instead of pages.

One noteable difference is filemap_get_folios_tag() does not take in a
maximum pages argument.  It instead tries to fill a folio batch and stops
either once full (15 folios) or reaching the end of the search range.

The new function supports large folios, the initial function did not since
all callers don't use large folios.

Link: https://lkml.kernel.org/r/20230104211448.4804-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcow (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: c5d3f9b7649a ("f2fs: compress: fix deadloop in f2fs_write_cache_pages()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf kwork: Set ordered_events to true in 'struct perf_tool'

[ Upstream commit 0c526579a4b2b6ecd540472f2e34c2850cf70f76 ]

'perf kwork' processes data based on timestamps and needs to sort events.

Fixes: f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230812084917.169338-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf kwork: Add the supported subcommands to the document

[ Upstream commit 76e0d8c821bbd952730799cc7af841f9de67b7f7 ]

Add missing report, latency and timehist subcommands to the document.

Fixes: f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand")
Fixes: ad3d9f7a929ab2df ("perf kwork: Implement perf kwork latency")
Fixes: bcc8b3e88d6fa1a3 ("perf kwork: Implement perf kwork timehist")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20230812084917.169338-3-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf kwork: Fix incorrect and missing free atom in work_push_atom()

[ Upstream commit d39710088d82ef100b33cdf4a9de3546fb0bb5df ]

1. Atoms are managed in page mode and should be released using atom_free()
   instead of free().
2. When the event does not match, the atom needs to free.

Fixes: f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230812084917.169338-2-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: frequency: adf4350: Use device managed functions and fix power down issue.

[ Upstream commit 9979cc64853b598518a485c2e554657d5c7a00c8 ]

The devm_clk_get_enabled() helper:
    - calls devm_clk_get()
    - calls clk_prepare_enable() and registers what is needed in order to
      call clk_disable_unprepare() when needed, as a managed resource.

Also replace devm_regulator_get() and regulator_enable() with
devm_regulator_get_enable() helper and remove regulator_disable().

Replace iio_device_register() with devm_iio_device_register() and remove
iio_device_unregister().

And st->reg is not used anymore, so remove it.

As Jonathan pointed out, couple of things that are wrong:

1) The device is powered down 'before' we unregister it with the
   subsystem and as such userspace interfaces are still exposed which
   probably won't do the right thing if the chip is powered down.

2) This isn't done in the error paths in probe.

To solve this problem, register a new callback adf4350_power_down()
with devm_add_action_or_reset(), to enable software power down in both
error and device detach path. So the remove function can be removed.

Remove spi_set_drvdata() from the probe function, since spi_get_drvdata()
is not used anymore.

Fixes: e31166f0fd48 ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230828062717.2310219-1-ruanjinjie@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Fix aggr mode initialization

[ Upstream commit a84fbf205609313594b86065c67e823f09ebe29b ]

Generating metrics llc_code_read_mpi_demand_plus_prefetch,
llc_data_read_mpi_demand_plus_prefetch,
llc_miss_local_memory_bandwidth_read,
llc_miss_local_memory_bandwidth_write,
nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read,
memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw,
C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency,
C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency,
C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would
trigger an address sanitizer heap-buffer-overflows on a SkylakeX.

```
==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98
READ of size 4 at 0x5020003eee78 thread T0
    #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12
    #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6
    #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9
    #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31
    #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18
    #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3
    #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5
    #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2
    #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3
    #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11
    #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8
    #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2
    #12 0x558265bb9389 in main tools/perf/perf.c:537:3
```

The issue was the use of testing a cpumap with NULL rather than using
empty, as a map containing the dummy value isn't NULL and the -1
results in an empty aggr map being allocated which legitimately
overflows when any member is accessed.

Fixes: 8a96f454f5668572 ("perf stat: Avoid SEGV if core.cpus isn't set")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: fix invalid reference on profile->disconnected

[ Upstream commit 8884ba07786c718771cf7b78cb3024924b27ec2b ]

profile->disconnected was storing an invalid reference to the
disconnected path. Fix it by duplicating the string using
aa_unpack_strdup and freeing accordingly.

Fixes: 72c8a768641d ("apparmor: allow profiles to provide info to disconnected paths")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: test: make static symbols visible during kunit testing

[ Upstream commit b11e51dd70947107fa4076c6286dce301671afc1 ]

Use macros, VISIBLE_IF_KUNIT and EXPORT_SYMBOL_IF_KUNIT, to allow
static symbols to be conditionally set to be visible during
apparmor_policy_unpack_test, which removes the need to include the testing
file in the implementation file.

Change the namespace of the symbols that are now conditionally visible (by
adding the prefix aa_) to avoid confusion with symbols of the same name.

Allow the test to be built as a module and namespace the module name from
policy_unpack_test to apparmor_policy_unpack_test to improve clarity of
the module name.

Provide an example of how static symbols can be dealt with in testing.

Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 8884ba07786c ("apparmor: fix invalid reference on profile->disconnected")
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: add macro to allow conditionally exposing static symbols to tests

[ Upstream commit 9c988fae6f6ae3224a568ab985881b66bb50c9ec ]

Create two macros:

VISIBLE_IF_KUNIT - A macro that sets symbols to be static if CONFIG_KUNIT
is not enabled. Otherwise if CONFIG_KUNIT is enabled there is no change to
the symbol definition.

EXPORT_SYMBOL_IF_KUNIT(symbol) - Exports symbol into
EXPORTED_FOR_KUNIT_TESTING namespace only if CONFIG_KUNIT is enabled. Must
use MODULE_IMPORT_NS(EXPORTED_FOR_KUNIT_TESTING) in test file in order to
use symbols.

Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: 8884ba07786c ("apparmor: fix invalid reference on profile->disconnected")
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: trigger: ledtrig-cpu:: Fix 'output may be truncated' issue for 'cpu'

[ Upstream commit ff50f53276131a3059e8307d11293af388ed2bcd ]

In order to teach the compiler that 'trig->name' will never be truncated,
we need to tell it that 'cpu' is not negative.

When building with W=1, this fixes the following warnings:

  drivers/leds/trigger/ledtrig-cpu.c: In function ‘ledtrig_cpu_init’:
  drivers/leds/trigger/ledtrig-cpu.c:155:56: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 5 [-Werror=format-truncation=]
    155 |                 snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
        |                                                        ^~
  drivers/leds/trigger/ledtrig-cpu.c:155:52: note: directive argument in the range [-2147483648, 7]
    155 |                 snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
        |                                                    ^~~~~~~
  drivers/leds/trigger/ledtrig-cpu.c:155:17: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8
    155 |                 snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
        |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 8f88731d052d ("led-triggers: create a trigger for CPU activity")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/3f4be7a99933cf8566e630da54f6ab913caac432.1695453322.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: pwm: Don't disable the PWM when the LED should be off

[ Upstream commit 76fe464c8e64e71b2e4af11edeef0e5d85eeb6aa ]

Disabling a PWM (i.e. calling pwm_apply_state with .enabled = false)
gives no guarantees what the PWM output does. It might freeze where it
currently is, or go in a High-Z state or drive the active or inactive
state, it might even continue to toggle.

To ensure that the LED gets really disabled, don't disable the PWM even
when .duty_cycle is zero.

This fixes disabling a leds-pwm LED on i.MX28. The PWM on this SoC is
one of those that freezes its output on disable, so if you disable an
LED that is full on, it stays on. If you disable a LED with half
brightness it goes off in 50% of the cases and full on in the other 50%.

Fixes: 41c42ff5dbe2 ("leds: simple driver for pwm driven LEDs")
Reported-by: Rogan Dawes <rogan@dawes.za.net>
Reported-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20230922192834.1695727-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: turris-omnia: Do not use SMBUS calls

[ Upstream commit 6de283b96b31b4890e3ee8c86caca2a3a30d1011 ]

The leds-turris-omnia driver uses three function for I2C access:
- i2c_smbus_write_byte_data() and i2c_smbus_read_byte_data(), which
  cause an emulated SMBUS transfer,
- i2c_master_send(), which causes an ordinary I2C transfer.

The Turris Omnia MCU LED controller is not semantically SMBUS, it
operates as a simple I2C bus. It does not implement any of the SMBUS
specific features, like PEC, or procedure calls, or anything. Moreover
the I2C controller driver also does not implement SMBUS, and so the
emulated SMBUS procedure from drivers/i2c/i2c-core-smbus.c is used for
the SMBUS calls, which gives an unnecessary overhead.

When I first wrote the driver, I was unaware of these facts, and I
simply used the first function that worked.

Drop the I2C SMBUS calls and instead use simple I2C transfers.

Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20230918161104.20860-2-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: turris-omnia: Drop unnecessary mutex locking

[ Upstream commit 760b6b7925bf09491aafa4727eef74fc6bf738b0 ]

Do not lock driver mutex in the global LED panel brightness sysfs
accessors brightness_show() and brightness_store().

The mutex locking is unnecessary here. The I2C transfers are guarded by
I2C core locking mechanism, and the LED commands itself do not interfere
with other commands.

Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230802160748.11208-2-kabel@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 6de283b96b31 ("leds: turris-omnia: Do not use SMBUS calls")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs

[ Upstream commit 831d1af85133e1763d41e20414912d9a1058ea72 ]

Commit 9e86b2ad4c11 changed the channel used for HPDET detection
(headphones vs lineout detection) from being hardcoded to
ARIZONA_ACCDET_MODE_HPL (HP left channel) to it being configurable
through arizona_pdata.hpdet_channel the DT/OF parsing added for
filling arizona_pdata on devicetree platforms ensures that
arizona_pdata.hpdet_channel gets set to ARIZONA_ACCDET_MODE_HPL
when not specified in the devicetree-node.

But on ACPI platforms where arizona_pdata is filled by
arizona_spi_acpi_probe() arizona_pdata.hpdet_channel was not
getting set, causing it to default to 0 aka ARIZONA_ACCDET_MODE_MIC.

This causes headphones to get misdetected as line-out on some models.
Fix this by setting hpdet_channel = ARIZONA_ACCDET_MODE_HPL.

Fixes: e933836744a2 ("mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231014205414.59415-1-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: mfd: mt6397: Split out compatible for MediaTek MT6366 PMIC

[ Upstream commit 61fdd1f1d2c183ec256527d16d75e75c3582af82 ]

The MT6366 PMIC is mostly, but not fully, compatible with MT6358. It has
a different set of regulators. Specifically, it lacks the camera related
VCAM* LDOs and VLDO28, but has additional VM18, VMDDR, and VSRAM_CORE LDOs.

The PMICs contain a chip ID register that can be used to detect which
exact model is preset, so it is possible to share a common base
compatible string.

Add a separate compatible for the MT6366 PMIC, with a fallback to the
MT6358 PMIC.

Fixes: 49be16305587 ("dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230928085537.3246669-2-wenst@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: mfd: mt6397: Add binding for MT6357

[ Upstream commit 118ee241c423636c03527eada8f672301514751e ]

Add binding documentation for the MT6357 PMIC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221005-mt6357-support-v3-1-7e0bd7c315b2@baylibre.com
Stable-dep-of: 61fdd1f1d2c1 ("dt-bindings: mfd: mt6397: Split out compatible for MediaTek MT6366 PMIC")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: dln2: Fix double put in dln2_probe

[ Upstream commit 759c409bc5fc496cbc22cd0b392d3cbb0c0e23eb ]

The dln2_free() already contains usb_put_dev(). Therefore,
the redundant usb_put_dev() before dln2_free() may lead to
a double free.

Fixes: 96da8f148396 ("mfd: dln2: Fix memory leak in dln2_probe()")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230925024134.9683-1-dinghao.liu@zju.edu.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: core: Ensure disabled devices are skipped without aborting

[ Upstream commit 7ba7bdef4d14e3722e2842da3b48cbadb73e52d6 ]

The loop searching for a matching device based on its compatible
string is aborted when a matching disabled device is found.
This abort prevents to add devices as soon as one disabled device
is found.

Continue searching for an other device instead of aborting on the
first disabled one fixes the issue.

Fixes: 22380b65dc70 ("mfd: mfd-core: Ensure disabled devices are ignored without error")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/528425d6472176bb1d02d79596b51f8c28a551cc.1692376361.git.christophe.leroy@csgroup.eu
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: core: Un-constify mfd_cell.of_reg

[ Upstream commit 3c70342f1f0045dc827bb2f02d814ce31e0e0d05 ]

Enable dynamically filling in the whole mfd_cell structure. All other
fields already allow that.

Fixes: 466a62d7642f ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/b73fe4bc4bd6ba1af90940a640ed65fe254c0408.1693253717.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF

[ Upstream commit 2ef422f063b74adcc4a4a9004b0a87bb55e0a836 ]

In the unlikely event that workqueue allocation fails and returns NULL in
mlx5_mkey_cache_init(), delete the call to
mlx5r_umr_resource_cleanup() (which frees the QP) in
mlx5_ib_stage_post_ib_reg_umr_init().  This will avoid attempted double
free of the same QP when __mlx5_ib_add() does its cleanup.

Resolves a splat:

   Syzkaller reported a UAF in ib_destroy_qp_user

   workqueue: Failed to create a rescuer kthread for wq "mkey_cache": -EINTR
   infiniband mlx5_0: mlx5_mkey_cache_init:981:(pid 1642):
   failed to create work queue
   infiniband mlx5_0: mlx5_ib_stage_post_ib_reg_umr_init:4075:(pid 1642):
   mr cache init failed -12
   ==================================================================
   BUG: KASAN: slab-use-after-free in ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
   Read of size 8 at addr ffff88810da310a8 by task repro_upstream/1642

   Call Trace:
   <TASK>
   kasan_report (mm/kasan/report.c:590)
   ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
   mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4178)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...
   </TASK>

   Allocated by task 1642:
   __kmalloc (./include/linux/kasan.h:198 mm/slab_common.c:1026
   mm/slab_common.c:1039)
   create_qp (./include/linux/slab.h:603 ./include/linux/slab.h:720
   ./include/rdma/ib_verbs.h:2795 drivers/infiniband/core/verbs.c:1209)
   ib_create_qp_kernel (drivers/infiniband/core/verbs.c:1347)
   mlx5r_umr_resource_init (drivers/infiniband/hw/mlx5/umr.c:164)
   mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4070)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...

   Freed by task 1642:
   __kmem_cache_free (mm/slub.c:1826 mm/slub.c:3809 mm/slub.c:3822)
   ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2112)
   mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198)
   mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4076
   drivers/infiniband/hw/mlx5/main.c:4065)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...

Fixes: 04876c12c19e ("RDMA/mlx5: Move init and cleanup of UMR to umr.c")
Link: https://lore.kernel.org/r/1698170518-4006-1-git-send-email-george.kennedy@oracle.com
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: ams-delta.c: use component after check

[ Upstream commit bd0f7498bc9084d8cccc5484cd004b40f314b763 ]

static void cx81801_close()
{
...
(A) struct snd_soc_dapm_context *dapm = &component->card->dapm;
...
(B) if (!component)
return;
}

(A) uses component before NULL check (B). This patch moves it after (B).

Fixes: d0fdfe34080c ("ASoC: cx20442: replace codec to component")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/3e608474-e99a-4866-ae98-3054a4221f09@moroto.mountain
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ttqdq623.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix deadlock in backlog processing

[ Upstream commit 203b01001c4d741205b9c329acddc5193ed56fbd ]

If a request has the flag CRYPTO_TFM_REQ_MAY_BACKLOG set, the function
qat_alg_send_message_maybacklog(), enqueues it in a backlog list if
either (1) there is already at least one request in the backlog list, or
(2) the HW ring is nearly full or (3) the enqueue to the HW ring fails.
If an interrupt occurs right before the lock in qat_alg_backlog_req() is
taken and the backlog queue is being emptied, then there is no request
in the HW queues that can trigger a subsequent interrupt that can clear
the backlog queue. In addition subsequent requests are enqueued to the
backlog list and not sent to the hardware.

Fix it by holding the lock while taking the decision if the request
needs to be included in the backlog queue or not. This synchronizes the
flow with the interrupt handler that drains the backlog queue.

For performance reasons, the logic has been changed to try to enqueue
first without holding the lock.

Fixes: 386823839732 ("crypto: qat - add backlog mechanism")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/af9581e2-58f9-cc19-428f-6f18f1f83d54@redhat.com/T/
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

padata: Fix refcnt handling in padata_free_shell()

[ Upstream commit 7ddc21e317b360c3444de3023bcc83b85fabae2f ]

In a high-load arm64 environment, the pcrypt_aead01 test in LTP can lead
to system UAF (Use-After-Free) issues. Due to the lengthy analysis of
the pcrypt_aead01 function call, I'll describe the problem scenario
using a simplified model:

Suppose there's a user of padata named `user_function` that adheres to
the padata requirement of calling `padata_free_shell` after `serial()`
has been invoked, as demonstrated in the following code:

```c
struct request {
    struct padata_priv padata;
    struct completion *done;
};

void parallel(struct padata_priv *padata) {
    do_something();
}

void serial(struct padata_priv *padata) {
    struct request *request = container_of(padata,
     struct request,
padata);
    complete(request->done);
}

void user_function() {
    DECLARE_COMPLETION(done)
    padata->parallel = parallel;
    padata->serial = serial;
    padata_do_parallel();
    wait_for_completion(&done);
    padata_free_shell();
}
```

In the corresponding padata.c file, there's the following code:

```c
static void padata_serial_worker(struct work_struct *serial_work) {
    ...
    cnt = 0;

    while (!list_empty(&local_list)) {
        ...
        padata->serial(padata);
        cnt++;
    }

    local_bh_enable();

    if (refcount_sub_and_test(cnt, &pd->refcnt))
        padata_free_pd(pd);
}
```

Because of the high system load and the accumulation of unexecuted
softirq at this moment, `local_bh_enable()` in padata takes longer
to execute than usual. Subsequently, when accessing `pd->refcnt`,
`pd` has already been released by `padata_free_shell()`, resulting
in a UAF issue with `pd->refcnt`.

The fix is straightforward: add `refcount_dec_and_test` before calling
`padata_free_pd` in `padata_free_shell`.

Fixes: 07928d9bfc81 ("padata: Remove broken queue flushing")

Signed-off-by: WangJinchao <wangjinchao@xfusion.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Fix mem leak when parsing UUIDs fails

[ Upstream commit 168d97844a61db302dec76d44406e9d4d7106b8e ]

Error path in snd_skl_parse_uuids() shall free last allocated module if
its instance_id allocation fails.

Fixes: f8e066521192 ("ASoC: Intel: Skylake: Fix uuid_module memory leak in failure case")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231026082558.1864910-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event()

[ Upstream commit ba9de350509504fb748837b71e23d7e84c83d93c ]

Calling get_wireless_feature_index() from probe() causes
the wireless_feature_index to only get set for unifying devices which
are already connected at probe() time. It does not get set for devices
which connect later.

Fix this by moving get_wireless_feature_index() to hidpp_connect_event(),
this does not make a difference for devices connected at probe() since
probe() will queue the hidpp_connect_event() for those at probe time.

This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)

And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)

Fixes: 0da0a63b7cba ("HID: logitech-hidpp: Support WirelessDeviceStatus connect events")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-4-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Revert "Don't restart communication if not necessary"

[ Upstream commit 55bf70362ffc4ddd7c8745e2fe880edac00e4aff ]

Commit 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable")
makes hidpp_probe() first call hid_hw_start(hdev, 0) to allow IO
without connecting any hid subdrivers (hid-input, hidraw).

This is done to allow to retrieve the device's name and serial number
and store these in hdev->name and hdev->uniq.

Then later on IO was stopped and started again with hid_hw_start(hdev,
HID_CONNECT_DEFAULT) connecting hid-input and hidraw after the name
and serial number have been setup.

Commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary") changed the probe() code to only do the start with
a 0 connect-mask + restart later for unifying devices.

But for non unifying devices hdev->name and hdev->uniq are updated too.
So this change re-introduces the problem for which the start with
a 0 connect-mask + restart later behavior was introduced.

The previous patch in this series changes the unifying path to instead of
restarting IO only call hid_connect() later. This avoids possible issues
with restarting IO seen on non unifying devices.

Revert the change to limit the restart behavior to unifying devices to
fix hdev->name changing after userspace facing devices have already been
registered.

This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)

And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)

Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-3-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only

[ Upstream commit 11ca0322a41920df2b462d2e45b0731e47ff475b ]

Restarting IO causes 2 problems:

1. Some devices do not like IO being restarted this was addressed in
   commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
   if not necessary"), but that change has issues of its own and needs to
   be reverted.

2. Restarting IO and specifically calling hid_device_io_stop() causes
   received packets to be missed, which may cause connect-events to
   get missed.

Restarting IO was introduced in commit 91cf9a98ae41 ("HID: logitech-hidpp:
make .probe usbhid capable") to allow to retrieve the device's name and
serial number and store these in hdev->name and hdev->uniq before
connecting any hid subdrivers (hid-input, hidraw) exporting this info
to userspace.

But this does not require restarting IO, this merely requires deferring
calling hid_connect(). Calling hid_hw_start() with a connect-mask of
0 makes it skip calling hid_connect(), so hidpp_probe() can simply call
hid_connect() later without needing to restart IO.

Remove the stop + restart of IO and instead just call hid_connect() later
to avoid the issues caused by restarting IO.

Now that IO is no longer stopped, hid_hw_close() must be called at the end
of probe() to balance the hid_hw_open() done at the beginning probe().

This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)

And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)

Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary")
Suggested-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231010102029.111003-2-hdegoede@redhat.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk

[ Upstream commit d83956c8855c6c2ed4bd16cec4a5083d63df17e4 ]

HIDPP_QUIRK_NO_HIDINPUT isn't used by any devices but still happens to
work as HIDPP_QUIRK_DELAYED_INIT is defined to the same value. Remove
HIDPP_QUIRK_NO_HIDINPUT and use HIDPP_QUIRK_DELAYED_INIT everywhere
instead.

Tested on a T650 which requires that quirk, and a number of unifying and
Bluetooth devices that don't.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230125121723.3122-2-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Stable-dep-of: 11ca0322a419 ("HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"

[ Upstream commit cae253d6033da885e71c29c1591b22838a52de76 ]

Now that we're in 2022, and the majority of desktop environments can and
should support touchpad gestures through libinput, remove the legacy
module parameter that made it possible to use gestures implemented in
firmware.

This will eventually allow simplifying the driver's initialisation code.

This reverts commit 9188dbaed68a4b23dc96eba165265c08caa7dc2a.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221220154345.474596-1-hadess@hadess.net
Stable-dep-of: 11ca0322a419 ("HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: bios: Revive earlyprintk support

[ Upstream commit 553f7ac78fbb41b2c93ab9b9d78e42274d27daa9 ]

The SuperH BIOS earlyprintk code is protected by CONFIG_EARLY_PRINTK.
However, when this protection was added, it was missed that SuperH no
longer defines an EARLY_PRINTK config symbol since commit
e76fe57447e88916 ("sh: Remove old early serial console code V2"), so
BIOS earlyprintk can no longer be used.

Fix this by reviving the EARLY_PRINTK config symbol.

Fixes: d0380e6c3c0f6edb ("early_printk: consolidate random copies of identical code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/c40972dfec3dcc6719808d5df388857360262878.1697708489.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hid: cp2112: Fix IRQ shutdown stopping polling for all IRQs on chip

[ Upstream commit dc3115e6c5d9863ec1a9ff1acf004ede93c34361 ]

Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).

Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.

Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Link: https://lore.kernel.org/r/20231011182317.1053344-1-danny.kaehn@plexus.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: cp2112: Make irq_chip immutable

[ Upstream commit 3e2977c425ad2789ca18084fff913cceacae75a2 ]

Since recently, the kernel is nagging about mutable irq_chips:

   "not an immutable chip, please consider fixing it!"

Drop the unneeded copy, flag it as IRQCHIP_IMMUTABLE, add the new
helper functions and call the appropriate gpiolib functions.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230703185222.50554-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Stable-dep-of: dc3115e6c5d9 ("hid: cp2112: Fix IRQ shutdown stopping polling for all IRQs on chip")
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hfi1: Workaround truncation compilation error

[ Upstream commit d4b2d165714c0ce8777d5131f6e0aad617b7adc4 ]

Increase name array to be large enough to overcome the following
compilation error.

drivers/infiniband/hw/hfi1/efivar.c: In function ‘read_hfi1_efi_var’:
drivers/infiniband/hw/hfi1/efivar.c:124:44: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  124 |         snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                                            ^
drivers/infiniband/hw/hfi1/efivar.c:124:9: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
  124 |         snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/efivar.c:133:52: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  133 |                 snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                                                    ^
drivers/infiniband/hw/hfi1/efivar.c:133:17: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
  133 |                 snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/infiniband/hw/hfi1/efivar.o] Error 1

Fixes: c03c08d50b3d ("IB/hfi1: Check upper-case EFI variables")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/238fa39a8fd60e87a5ad7e1ca6584fcdf32e9519.1698159993.git.leonro@nvidia.com
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Leave space for '\0' in utf8 desc string

[ Upstream commit a75a16c62a2540f11eeae4f2b50e95deefb652ea ]

utf16s_to_utf8s does not NULL terminate the output string. For us to be
able to add a NULL character when utf16s_to_utf8s returns, we need to make
sure that there is space for such NULL character at the end of the output
buffer. We can achieve this by passing an output buffer size to
utf16s_to_utf8s that is one character less than what we allocated.

Other call sites of utf16s_to_utf8s appear to be using the same technique
where they artificially reduce the buffer size by one to leave space for a
NULL character or line feed character.

Fixes: 4b828fe156a6 ("scsi: ufs: revamp string descriptor reading")
Reviewed-by: Mars Cheng <marscheng@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yen-lin Lai <yenlinlai@google.com>
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: Fix PM disable depth imbalance in fsl_easrc_probe

[ Upstream commit 9e630efb5a4af56fdb15aa10405f5cfd3f5f5b83 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.

Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C0D62E6D89818179A02A04A0C248F0DDC40A@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: core: Ensure sof_ops_free() is still called when probe never ran.

[ Upstream commit f549a82aff57865c47b5abd17336b23cd9bb2d2c ]

In an effort to not call sof_ops_free twice, we stopped running it when
probe was aborted.

Check the result of cancel_work_sync to see if this was the case.

Fixes: 31bb7bd9ffee ("ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful")
Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/20231009115437.99976-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: The UD mode can only be configured with DCQCN

[ Upstream commit 27c5fd271d8b8730fc0bb1b6cae953ad7808a874 ]

Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.

Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Add check for SL

[ Upstream commit 5e617c18b1f34ec57ad5dce44f09de603cf6bd6c ]

SL set by users may exceed the capability of devices. So add check
for this situation.

Fixes: fba429fcf9a5 ("RDMA/hns: Fix missing fields in address vector")
Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: f0cb411aad23 ("RDMA/hns: Use new interface to modify QP context")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix signed-unsigned mixed comparisons

[ Upstream commit b5f9efff101b06fd06a5e280a2b00b1335f5f476 ]

The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.

This patch adds judgement for this situation.

Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()

[ Upstream commit c64e9710f9241e38a1c761ed1c1a30854784da66 ]

ucmd in hns_roce_create_qp_common() are not initialized. But it works fine
until new member sdb_addr is added to struct hns_roce_ib_create_qp.

If the user-mode driver uses an old version ABI, then the value of the new
member will be undefined after ib_copy_from_udata().

This patch fixes it by initialize this variable to 0. And the default value
of the new member sdb_addr will be 0 which is invalid.

Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix printing level of asynchronous events

[ Upstream commit 9faef73ef4f6666b97e04d99734ac09251098185 ]

The current driver will print all asynchronous events. Some of the
print levels are set improperly, e.g. SRQ limit reach and SRQ last
wqe reach, which may also occur during normal operation of the software.
Currently, the information of these event is printed as a warning,
which causes a large amount of printing even during normal use of the
application. As a result, the service performance deteriorates.

This patch fixes the printing storms by modifying the print level.

Fixes: b00a92c8f2ca ("RDMA/hns: Move all prints out of irq handle")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Fix rdma counter binding for RAW QP

[ Upstream commit c1336bb4aa5e809a622a87d74311275514086596 ]

Previously when we had a RAW QP, we bound a counter to it when it moved
to INIT state, using the counter context inside RQC.

But when we try to modify that counter later in RTS state we used
modify QP which tries to change the counter inside QPC instead of RQC.

Now we correctly modify the counter set_id inside of RQC instead of QPC
for the RAW QP.

Fixes: d14133dd4161 ("IB/mlx5: Support set qp counter")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/2e5ab6713784a8fe997d19c508187a0dfecf2dfc.1696847964.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl: mpc5200_dma.c: Fix warning of Function parameter or member not described

[ Upstream commit 4a221b2e3340f4a3c2b414c46c846a26c6caf820 ]

This patch fixes the warnings of "Function parameter or member 'xxx'
not described".

>> sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'component' not described in 'psc_dma_trigger'
   sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'substream' not described in 'psc_dma_trigger'
   sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'cmd' not described in 'psc_dma_trigger'

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310061914.jJuekdHs-lkp@intel.com/
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Fixes: 6d1048bc1152 ("ASoC: fsl: mpc5200_dma: remove snd_pcm_ops")
Link: https://lore.kernel.org/r/87il7fcqm8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: move 'ix' sanity check to corrent position

[ Upstream commit af90a8f4a09ec4a3de20142e37f37205d4687f28 ]

Check 'ix' before it is used.

Fixes: 80e675f906db ("ext4: optimize memmmove lengths in extent/index insertions")
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Link: https://lore.kernel.org/r/20230906013341.7199-1-gouhao@uniontech.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9321/1: memset: cast the constant byte to unsigned char

[ Upstream commit c0e824661f443b8cab3897006c1bbc69fd0e7bc4 ]

memset() description in ISO/IEC 9899:1999 (and elsewhere) says:

The memset function copies the value of c (converted to an
unsigned char) into each of the first n characters of the
object pointed to by s.

The kernel's arm32 memset does not cast c to unsigned char. This results
in the following code to produce erroneous output:

char a[128];
memset(a, -128, sizeof(a));

This is because gcc will generally emit the following code before
it calls memset() :

mov   r0, r7
mvn   r1, #127        ; 0x7f
bl    00000000 <memset>

r1 ends up with 0xffffff80 before being used by memset() and the
'a' array will have -128 once in every four bytes while the other
bytes will be set incorrectly to -1 like this (printing the first
8 bytes) :

test_module: -128 -1 -1 -1
test_module: -1 -1 -1 -128

The change here is to 'and' r1 with 255 before it is used.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - fix PF queue parameter issue

[ Upstream commit 5831fc1fd4a578232fea708b82de0c666ed17153 ]

If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.

After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.

Fixes: 8bbecfb402f7 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - split a debugfs.c from qm

[ Upstream commit 94476b2b6d60bc926a585ae62e1bf69bd22c1dff ]

Considering that the qm feature and debugfs feature are independent.
The code related to debugfs is getting larger and larger. It should be
separate as a debugfs file. So move some debugfs code to new file from
qm file. The qm code logic is not modified. And maintainability is
enhanced.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 5831fc1fd4a5 ("crypto: hisilicon/qm - fix PF queue parameter issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - modify the process of regs dfx

[ Upstream commit b40b62ed7b0ffe8eb2e6fe8bcfb47027c9a93e93 ]

The last register logic and different register logic are combined.
Use "u32" instead of 'int' in the regs function input parameter to
simplify some checks.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 5831fc1fd4a5 ("crypto: hisilicon/qm - fix PF queue parameter issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - delete redundant null assignment operations

[ Upstream commit 7bbbc9d81be588ae4fb28b5b202e4421dbfef197 ]

There is no security data in the pointer. It is only a value transferred
as a structure. It makes no sense to zero a variable that is on the stack.
So not need to set the pointer to null.

Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 5831fc1fd4a5 ("crypto: hisilicon/qm - fix PF queue parameter issue")
Signed-off-by: Sasha Levin <sashal@kernel.org>

hid: cp2112: Fix duplicate workqueue initialization

[ Upstream commit e3c2d2d144c082dd71596953193adf9891491f42 ]

Previously the cp2112 driver called INIT_DELAYED_WORK within
cp2112_gpio_irq_startup, resulting in duplicate initilizations of the
workqueue on subsequent IRQ startups following an initial request. This
resulted in a warning in set_work_data in workqueue.c, as well as a rare
NULL dereference within process_one_work in workqueue.c.

Initialize the workqueue within _probe instead.

Fixes: 13de9cca514e ("HID: cp2112: add IRQ chip handling")
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: vmd: Correct PCI Header Type Register's multi-function check

[ Upstream commit 5827e17d0555b566c32044b0632b46f9f95054fa ]

vmd_domain_reset() attempts to find whether the device may contain multiple
functions by checking 0x80 (Multi-Function Device), however, the hdr_type
variable has already been masked with PCI_HEADER_TYPE_MASK so the check can
never true.

To fix the issue, don't mask the read with PCI_HEADER_TYPE_MASK.

Fixes: 6aab5622296b ("PCI: vmd: Clean up domain before enumeration")
Link: https://lore.kernel.org/r/20231003125300.5541-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - increase size of buffers

[ Upstream commit 4e4e2ed22d505c5bacf65c6a39bfb6d120d24785 ]

Increase the size of the buffers used for composing the names used for
the transport debugfs entries and the vector name to avoid a potential
truncation.

This resolves the following errors when compiling the driver with W=1
and KCFLAGS=-Werror on GCC 12.3.1:

    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c: In function ‘adf_ring_debugfs_add’:
    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c:100:60: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
    drivers/crypto/intel/qat/qat_common/adf_isr.c: In function ‘adf_isr_resource_alloc’:
    drivers/crypto/intel/qat/qat_common/adf_isr.c:197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 5 [-Werror=format-truncation=]

Fixes: a672a9dc872e ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam/jr - fix Chacha20 + Poly1305 self test failure

[ Upstream commit a8d3cdcc092fb2f2882acb6c20473a1be0ef4484 ]

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: d6bbd4eea243 ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam/qi2 - fix Chacha20 + Poly1305 self test failure

[ Upstream commit 7b8c6aee0d5b864e70c0da82583f9862e374eaf3 ]

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: c10a53367901 ("crypto: caam/qi2 - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nd_btt: Make BTT lanes preemptible

[ Upstream commit 36c75ce3bd299878fd9b238e9803d3817ddafbf3 ]

nd_region_acquire_lane uses get_cpu, which disables preemption. This is
an issue on PREEMPT_RT kernels, since btt_write_pg and also
nd_region_acquire_lane itself take a spin lock, resulting in BUG:
sleeping function called from invalid context.

Fix the issue by replacing get_cpu with smp_process_id and
migrate_disable when needed. This makes BTT operations preemptible, thus
permitting the use of spin_lock.

BUG example occurring when running ndctl tests on PREEMPT_RT kernel:

BUG: sleeping function called from invalid context at
kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 4903, name:
libndctl
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<ffffffffc1313db5>] nd_region_acquire_lane+0x15/0x90 [libnvdimm]
Call Trace:
 <TASK>
 dump_stack_lvl+0x8e/0xb0
 __might_resched+0x19b/0x250
 rt_spin_lock+0x4c/0x100
 ? btt_write_pg+0x2d7/0x500 [nd_btt]
 btt_write_pg+0x2d7/0x500 [nd_btt]
 ? local_clock_noinstr+0x9/0xc0
 btt_submit_bio+0x16d/0x270 [nd_btt]
 __submit_bio+0x48/0x80
 __submit_bio_noacct+0x7e/0x1e0
 submit_bio_wait+0x58/0xb0
 __blkdev_direct_IO_simple+0x107/0x240
 ? inode_set_ctime_current+0x51/0x110
 ? __pfx_submit_bio_wait_endio+0x10/0x10
 blkdev_write_iter+0x1d8/0x290
 vfs_write+0x237/0x330
 ...
 </TASK>

Fixes: 5212e11fde4d ("nd_btt: atomic sector updates")
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libnvdimm/of_pmem: Use devm_kstrdup instead of kstrdup and check its return value

[ Upstream commit 6fd4ebfc4d61e3097b595ab2725d513e3bbd6739 ]

Use devm_kstrdup() instead of kstrdup() and check its return value to
avoid memory leak.

Fixes: 49bddc73d15c ("libnvdimm/of_pmem: Provide a unique name for bus provider")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ibmvfc: Fix erroneous use of rtas_busy_delay with hcall return code

[ Upstream commit 670106eb4c8b23475f8c2b3416005a312afa622f ]

Commit 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ
during cleanup") wrongly changed the busy loop check to use
rtas_busy_delay() instead of H_BUSY and H_IS_LONG_BUSY(). The busy return
codes for RTAS and hypercalls are not the same.

Fix this issue by restoring the use of H_BUSY and H_IS_LONG_BUSY().

Fixes: 0217a272fe13 ("scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ  during cleanup")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20230921225435.3537728-5-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix unregistration of crypto algorithms

[ Upstream commit 9b2f33a1bfcda90b857431a764c9c8f9a412bbe5 ]

The function adf_dev_init(), through the subsystem qat_crypto, populates
the list of list of crypto instances accel_dev->crypto_list.
If the list of instances is not empty, the function adf_dev_start() will
then call qat_algs_registers() and qat_asym_algs_register() to register
the crypto algorithms into the crypto framework.

If any of the functions in adf_dev_start() fail, the caller of such
function, in the error path calls adf_dev_down() which in turn call
adf_dev_stop() and adf_dev_shutdown(), see for example the function
state_store in adf_sriov.c.
However, if the registration of crypto algorithms is not done,
adf_dev_stop() will try to unregister the algorithms regardless.
This might cause the counter active_devs in qat_algs.c and
qat_asym_algs.c to get to a negative value.

Add a new state, ADF_STATUS_CRYPTO_ALGS_REGISTERED, which tracks if the
crypto algorithms are registered into the crypto framework. Then use
this to unregister the algorithms if such flag is set. This ensures that
the crypto algorithms are only unregistered if previously registered.

Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - extend buffer list interface

[ Upstream commit cf692906bd61af2eec06a32a83d2a8ec3acf3548 ]

The compression service requires an additional pre-allocated buffer for
each destination scatter list.
Extend the function qat_alg_sgl_to_bufl() to take an additional
structure that contains the dma address and the size of the extra
buffer which will be appended in the destination FW SGL.

The logic that unmaps buffers in qat_alg_free_bufl() has been changed to
start unmapping from buffer 0 instead of skipping the initial buffers
num_buff - num_mapped_bufs as that functionality was not used in the
code.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 9b2f33a1bfcd ("crypto: qat - fix unregistration of crypto algorithms")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - generalize crypto request buffers

[ Upstream commit 36ebc7472afeb58f1eb1d4c1f0546b9e98acea46 ]

The structure qat_crypto_request_buffs which contains the source and
destination buffer lists and correspondent sizes and dma addresses is
also required for the compression service.
Rename it as qat_request_buffs and move it to qat_bl.h.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 9b2f33a1bfcd ("crypto: qat - fix unregistration of crypto algorithms")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - change bufferlist logic interface

[ Upstream commit 3ed330d0dba61d2e08a0eed7aa3d5def3f0c749b ]

The functions qat_alg_sgl_to_bufl() and qat_alg_free_bufl() take as
argument a qat_crypto_instance and a qat_crypto_request structure.
These two structures are used only to get a reference to the
adf_accel_dev and qat_crypto_request_buffs.

In order to reuse these functions for the compression service, change
the signature so that they take adf_accel_dev and
qat_crypto_request_buffs.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 9b2f33a1bfcd ("crypto: qat - fix unregistration of crypto algorithms")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - rename bufferlist functions

[ Upstream commit b0cd997f35598c4fc01bf22061e1eb88fc10afad ]

Rename the functions qat_alg_sgl_to_bufl() and qat_alg_free_bufl() as
qat_bl_sgl_to_bufl() and qat_bl_free_bufl() after their relocation into
the qat_bl module.

This commit does not implement any functional change.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 9b2f33a1bfcd ("crypto: qat - fix unregistration of crypto algorithms")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - relocate bufferlist logic

[ Upstream commit e9612987e437b7ada686f472c7596686fabecb2b ]

Move the logic that maps, unmaps and converts scatterlists into QAT
bufferlists from qat_algs.c to a new module, qat_bl.
This is to allow reuse of the logic by the data compression service.

This commit does not implement any functional change.

Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 9b2f33a1bfcd ("crypto: qat - fix unregistration of crypto algorithms")
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - ignore subsequent state up commands

[ Upstream commit 9c20cb8b1847dedddec3d5163079290542bf00bf ]

If the device is already in the up state, a subsequent write of `up` to
the sysfs attribute /sys/bus/pci/devices/<BDF>/qat/state brings the
device down.
Fix this behaviour by ignoring subsequent `up` commands if the device is
already in the up state.

Fixes: 1bdc85550a2b ("crypto: qat - fix concurrency issue when device state changes")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>