USB: quirks: enable device-qualifier quirk for yet another Elan touchscreen

commit d749947561af5996ccc076b2ffcc5f48b1be5d74 upstream.

Yet another device affected by this.

Tested-by: Kevin Fenzi <kevin@scrye.com>
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: enable device-qualifier quirk for another Elan touchscreen

commit 876af5d454548be40327ba9efea4bc92a8575019 upstream.

Currently this quirk is enabled for the model with the device id 0x0089, it
is needed for the 0x009b model, which is found on the Fujitsu Lifebook u904
as well.

Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: enable device-qualifier quirk for Elan Touchscreen

commit c68929f75dfcb6354918862b91b5778585de1fa5 upstream.

Enable device-qualifier quirk for Elan Touchscreen, which often fails to
handle requests for the device_descriptor.

Note that the device sometimes do respond properly with a Request Error
(three times as USB core retries), but usually fails to respond at all.
When this happens any further descriptor requests also fails, for
example:

[ 1528.688934] usb 2-7: new full-speed USB device number 4 using xhci_hcd
[ 1530.945588] usb 2-7: unable to read config index 0 descriptor/start: -71
[ 1530.945592] usb 2-7: can't read configurations, error -71

This has been observed repeating for over a minute before eventual
successful enumeration.

Reported-by: Drew Von Spreecken <drewvs@gmail.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: add device-qualifier quirk

commit 2a159389bf5d962359349a76827b2f683276a1c7 upstream.

Add new quirk for devices that cannot handle requests for the
device_qualifier descriptor.

A USB-2.0 compliant device must respond to requests for the
device_qualifier descriptor (even if it's with a request error), but at
least one device is known to misbehave after such a request.

Suggested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: dsps: start OTG timer on resume again

commit 53185b3a441a6cc9bb3f57e924342d249138dcd6 upstream.

Commit 468bcc2a2ca ("usb: musb: dsps: kill OTG timer on suspend") stopped
the timer in suspend path but forgot the re-enable it in the resume
path. This patch fixes the behaviour.

Fixes 468bcc2a2ca "usb: musb: dsps: kill OTG timer on suspend"
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: cppi41: restart hrtimer only if not yet done

commit d2e6d62c9cbbc2da4211f672dbeea08960e29a80 upstream.

commit c58d80f52 ("usb: musb: Ensure that cppi41 timer gets armed on
premature DMA TX irq") fixed hrtimer scheduling bug. There is one left
which does not trigger that often.
The following scenario is still possible:

    lock(&x->lock);
    hrtimer_start(&x->t);
    unlock(&x->lock);

expires:
    t->function();
                                lock(&x->lock);
    lock(&x->lock);             if (!hrtimer_queued(&x->t))
                                        hrtimer_start(&x->t);
                                unlock(&x->lock);

    if (!list_empty(x->early_tx_list))
           ret = HRTIMER_RESTART;
->         hrtimer_forward_now(...)
    } else
           ret = HRTIMER_NORESTART;

    unlock(&x->lock);

and the timer callback returns HRTIMER_RESTART for an armed timer. This
is wrong and we run into the BUG_ON() in __run_hrtimer().
This can happens on SMP or PREEMPT-RT.
The patch fixes the problem by only starting the timer if the timer is
not yet queued.

Reported-by: Torben Hohn <torbenh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: collected information and created a patch + description based
          on it]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM

commit 2b9375b91bef65b837bed61a05fb387159b38ddf upstream.

If PM_RUNTIME is enabled, it is easy to trigger the following backtrace
on pxa2xx hosts:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at /home/lumag/linux/arch/arm/mach-pxa/clock.c:35 clk_disable+0xa0/0xa8()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00007-g1b3d2ee-dirty #104
[<c000de68>] (unwind_backtrace) from [<c000c078>] (show_stack+0x10/0x14)
[<c000c078>] (show_stack) from [<c001d75c>] (warn_slowpath_common+0x6c/0x8c)
[<c001d75c>] (warn_slowpath_common) from [<c001d818>] (warn_slowpath_null+0x1c/0x24)
[<c001d818>] (warn_slowpath_null) from [<c0015e80>] (clk_disable+0xa0/0xa8)
[<c0015e80>] (clk_disable) from [<c02507f8>] (pxa2xx_spi_suspend+0x2c/0x34)
[<c02507f8>] (pxa2xx_spi_suspend) from [<c0200360>] (platform_pm_suspend+0x2c/0x54)
[<c0200360>] (platform_pm_suspend) from [<c0207fec>] (dpm_run_callback.isra.14+0x2c/0x74)
[<c0207fec>] (dpm_run_callback.isra.14) from [<c0209254>] (__device_suspend+0x120/0x2f8)
[<c0209254>] (__device_suspend) from [<c0209a94>] (dpm_suspend+0x50/0x208)
[<c0209a94>] (dpm_suspend) from [<c00455ac>] (suspend_devices_and_enter+0x8c/0x3a0)
[<c00455ac>] (suspend_devices_and_enter) from [<c0045ad4>] (pm_suspend+0x214/0x2a8)
[<c0045ad4>] (pm_suspend) from [<c04b5c34>] (test_suspend+0x14c/0x1dc)
[<c04b5c34>] (test_suspend) from [<c000880c>] (do_one_initcall+0x8c/0x1fc)
[<c000880c>] (do_one_initcall) from [<c04aecfc>] (kernel_init_freeable+0xf4/0x1b4)
[<c04aecfc>] (kernel_init_freeable) from [<c0378078>] (kernel_init+0x8/0xec)
[<c0378078>] (kernel_init) from [<c0009590>] (ret_from_fork+0x14/0x24)
---[ end trace 46524156d8faa4f6 ]---

This happens because suspend function tries to disable a clock that is
already disabled by runtime_suspend callback. Add if
(!pm_runtime_suspended()) checks to suspend/resume path.

Fixes: 7d94a505858 (spi/pxa2xx: add support for runtime PM)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reported-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: fsl-dspi: Fix CTAR selection

commit 5cc7b04740effa5cc0af53f434134b5859d58b73 upstream.

There are only 4 CTAR registers (CTAR0 - CTAR3) so we can only use the
lower 2 bits of the chip select to select a CTAR register.
SPI_PUSHR_CTAS used the lower 3 bits which would result in wrong bit values
if the chip selects 4/5 are used. For those chip selects SPI_CTAR even
calculated offsets of non-existing registers.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: pl022: Fix incorrect dma_unmap_sg

commit 3ffa6158f002e096d28ede71be4e0ee8ab20baa2 upstream.

When mapped RX DMA entries are unmapped in an error condition when DMA
is firstly configured in the driver, the number of TX DMA entries was
passed in, which is incorrect

Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: gadget: Properly initialize LINK TRB

commit 1200a82a59b6aa65758ccc92c3447b98c53cd7a2 upstream.

On ISOC endpoints the last trb_pool entry used as a
LINK TRB is not getting zeroed out correctly due to
memset being called incorrectly and in the wrong place.
If pool allocated from DMA was not zero-initialized
to begin with this will result in the size and ctrl
values being random garbage. Call memset correctly after
assignment of the trb_link pointer.

Fixes: f6bafc6a1c ("usb: dwc3: convert TRBs into bitshifts")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wireless: rt2x00: add new rt2800usb device

commit 664d6a792785cc677c2091038ce10322c8d04ae1 upstream.

0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle

References: https://bugs.debian.org/766802
Reported-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wireless: rt2x00: add new rt2800usb devices

commit 6a06e554daef86c4e8d290284927b081fedb249e upstream.

0x0b05 0x17e8 RT5372 USB 2.0  bgn 2x2 ASUS USB-N14
0x0411 0x0253 RT5572 USB 2.0 abgn 2x2 BUFFALO WLP-U2-300D
0x0df6 0x0078 RT???? Sitecom N300

Cc: Ivo van Doorn <IvDoorn@gmail.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: users@rt2x00.serialmonkey.com
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: support Ralink 5362.

commit ac0372abf8524a7572a9cdaac6495eb2eba20457 upstream.

Signed-off-by: Canek Peláez Valdés <canek@ciencias.unam.mx>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option: add Haier CE81B CDMA modem

commit 012eee1522318b5ccd64d277d50ac32f7e9974fe upstream.

Port layout:

0: QCDM/DIAG
1: NMEA
2: AT
3: AT/PPP

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: add support for Telit LE910

commit 2d0eb862dd477c3c4f32b201254ca0b40e6f465c upstream.

Add VID/PID for Telit LE910 modem. Interfaces description is almost the
same than LE920, except that the qmi interface is number 2 (instead than
5).

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: phy: return -ENODEV on failure of try_module_get

commit 2c4e3dbf63b39d44a291db70016c718f45d9cd46 upstream.

When __usb_find_phy_dev() does not return error and
try_module_get() fails, return -ENODEV.

Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: only raise DTR on transitions from B0

commit 4473d054ceb572557954f9536731d39b20937b0c upstream.

Make sure to only raise DTR on transitions from B0 in set_termios.

Also allow set_termios to be called from open with a termios_old of
NULL. Note that DTR will not be raised prematurely in this case.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: add device id for GW Instek AFG-2225

commit cf84a691a61606a2e7269907d3727e2d9fa148ee upstream.

Add device-id entry for GW Instek AFG-2225, which has a byte swapped
bInterfaceSubClass (0x20).

Reported-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: serial: ftdi_sio: add "bricked" FTDI device PID

commit 7f2719f0003da1ad13124ef00f48d7514c79e30d upstream.

An official recent Windows driver from FTDI detects counterfeit devices
and reprograms the internal EEPROM containing the USB PID to 0, effectively
bricking the device.

Add support for this VID/PID pair to correctly bind the driver on these
devices.

See:
http://hackaday.com/2014/10/22/watch-that-windows-update-ftdi-drivers-are-killing-fake-chips/

Signed-off-by: Perry Hung <iperry@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: serial: ftdi_sio: add Awinda Station and Dongle products

commit edd74ffab1f6909eee400c7de8ce621870aacac9 upstream.

Add new IDs for the Xsens Awinda Station and Awinda Dongle.

While at it, order the definitions by PID and add a logical separation
between devices using Xsens' VID and those using FTDI's VID.

Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add Silicon Labs 358x VID and PID

commit 35cc83eab097e5720a9cc0ec12bdc3a726f58381 upstream.

Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial
driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now
connect to host PCs over a USB serial link.

Signed-off-by: Nathaniel Ting <nathaniel.ting@silabs.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: Fix divide-by-zero fault in uart_get_divisor()

commit 547039ec502076e60034eeb79611df3433a99b7d upstream.

uart_get_baud_rate() will return baud == 0 if the max rate is set
to the "magic" 38400 rate and the SPD_* flags are also specified.
On the first iteration, if the current baud rate is higher than the
max, the baud rate is clamped at the max (which in the degenerate
case is 38400). On the second iteration, the now-"magic" 38400 baud
rate selects the possibly higher alternate baud rate indicated by
the SPD_* flag. Since only two loop iterations are performed, the
loop is exited, a kernel WARNING is generated and a baud rate of
0 is returned.

Reproducible with:
 setserial /dev/ttyS0 spd_hi base_baud 38400

Only perform the "magic" 38400 -> SPD_* baud transform on the first
loop iteration, which prevents the degenerate case from recognizing
the clamped baud rate as the "magic" 38400 value.

Reported-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:ade7758: Remove "raw" from channel name

commit b598aacc29331e7e638cd509108600e916c6331b upstream.

"raw" is a property of a channel, but should not be part of the name of
channel.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:ade7758: Fix check if channels are enabled in prenable

commit 79fa64eb2ee8ccb4bcad7f54caa2699730b10b22 upstream.

We should check if a channel is enabled, not if no channels are enabled.

Fixes: 550268ca1111 ("staging:iio: scrap scan_count and ensure all drivers use active_scan_mask")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:ade7758: Fix NULL pointer deref when enabling buffer

commit e10554738cab4224e097c2f9d975ea781a4fcde4 upstream.

In older versions of the IIO framework it was possible to pass a completely
different set of channels to iio_buffer_register() as the one that is
assigned to the IIO device. Commit 959d2952d124 ("staging:iio: make
iio_sw_buffer_preenable much more general.") introduced a restriction that
requires that the set of channels that is passed to iio_buffer_register() is
a subset of the channels assigned to the IIO device as the IIO core will use
the list of channels that is assigned to the device to lookup a channel by
scan index in iio_compute_scan_bytes(). If it can not find the channel the
function will crash. This patch fixes the issue by making sure that the same
set of channels is assigned to the IIO device and passed to
iio_buffer_register().

Note that we need to remove the IIO_CHAN_INFO_RAW and IIO_CHAN_INFO_SCALE
info attributes from the channels since we don't actually want those to be
registered.

Fixes the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 00000016
pgd = d2094000
[00000016] *pgd=16e39831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 1695 Comm: bash Not tainted 3.17.0-06329-g29461ee #9686
task: d7768040 ti: d5bd4000 task.ti: d5bd4000
PC is at iio_compute_scan_bytes+0x38/0xc0
LR is at iio_compute_scan_bytes+0x34/0xc0
pc : [<c0316de8>]    lr : [<c0316de4>]    psr: 60070013
sp : d5bd5ec0  ip : 00000000  fp : 00000000
r10: d769f934  r9 : 00000000  r8 : 00000001
r7 : 00000000  r6 : c8fc6240  r5 : d769f800  r4 : 00000000
r3 : d769f800  r2 : 00000000  r1 : ffffffff  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 18c5387d  Table: 1209404a  DAC: 00000015
Process bash (pid: 1695, stack limit = 0xd5bd4240)
Stack: (0xd5bd5ec0 to 0xd5bd6000)
5ec0: d769f800 d7435640 c8fc6240 d769f984 00000000 c03175a4 d7435690 d7435640
5ee0: d769f990 00000002 00000000 d769f800 d5bd4000 00000000 000b43a8 c03177f4
5f00: d769f810 0162b8c8 00000002 c8fc7e00 d77f1d08 d77f1da8 c8fc7e00 c01faf1c
5f20: 00000002 c010694c c010690c d5bd5f88 00000002 c8fc6840 c8fc684c c0105e08
5f40: 00000000 00000000 d20d1580 00000002 000af408 d5bd5f88 c000de84 c00b76d4
5f60: d20d1580 000af408 00000002 d20d1580 d20d1580 00000002 000af408 c000de84
5f80: 00000000 c00b7a44 00000000 00000000 00000002 b6ebea78 00000002 000af408
5fa0: 00000004 c000dd00 b6ebea78 00000002 00000001 000af408 00000002 00000000
5fc0: b6ebea78 00000002 000af408 00000004 bee96a4c 000a6094 00000000 000b43a8
5fe0: 00000000 bee969cc b6e2eb77 b6e6525c 40070010 00000001 00000000 00000000
[<c0316de8>] (iio_compute_scan_bytes) from [<c03175a4>] (__iio_update_buffers+0x248/0x438)
[<c03175a4>] (__iio_update_buffers) from [<c03177f4>] (iio_buffer_store_enable+0x60/0x7c)
[<c03177f4>] (iio_buffer_store_enable) from [<c01faf1c>] (dev_attr_store+0x18/0x24)
[<c01faf1c>] (dev_attr_store) from [<c010694c>] (sysfs_kf_write+0x40/0x4c)
[<c010694c>] (sysfs_kf_write) from [<c0105e08>] (kernfs_fop_write+0x110/0x154)
[<c0105e08>] (kernfs_fop_write) from [<c00b76d4>] (vfs_write+0xbc/0x170)
[<c00b76d4>] (vfs_write) from [<c00b7a44>] (SyS_write+0x40/0x78)
[<c00b7a44>] (SyS_write) from [<c000dd00>] (ret_fast_syscall+0x0/0x30)

Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:ad5933: Drop "raw" from channel names

commit 6822ee34ad57b29a3b44df2c2829910f03c34fa4 upstream.

"raw" is the name of a channel property, but should not be part of the
channel name itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:ad5933: Fix NULL pointer deref when enabling buffer

commit 824269c5868d2a7a26417e5ef3841a27d42c6139 upstream.

In older versions of the IIO framework it was possible to pass a
completely different set of channels to iio_buffer_register() as the one
that is assigned to the IIO device. Commit 959d2952d124 ("staging:iio: make
iio_sw_buffer_preenable much more general.") introduced a restriction that
requires that the set of channels that is passed to iio_buffer_register() is
a subset of the channels assigned to the IIO device as the IIO core will use
the list of channels that is assigned to the device to lookup a channel by
scan index in iio_compute_scan_bytes(). If it can not find the channel the
function will crash. This patch fixes the issue by making sure that the same
set of channels is assigned to the IIO device and passed to
iio_buffer_register().

Fixes the follow NULL pointer derefernce kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 00000016
pgd = d53d0000
[00000016] *pgd=1534e831, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 1626 Comm: bash Not tainted 3.15.0-19969-g2a180eb-dirty #9545
task: d6c124c0 ti: d539a000 task.ti: d539a000
PC is at iio_compute_scan_bytes+0x34/0xa8
LR is at iio_compute_scan_bytes+0x34/0xa8
pc : [<c03052e4>]    lr : [<c03052e4>]    psr: 60070013
sp : d539beb8  ip : 00000001  fp : 00000000
r10: 00000002  r9 : 00000000  r8 : 00000001
r7 : 00000000  r6 : d6dc8800  r5 : d7571000  r4 : 00000002
r3 : d7571000  r2 : 00000044  r1 : 00000001  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 18c5387d  Table: 153d004a  DAC: 00000015
Process bash (pid: 1626, stack limit = 0xd539a240)
Stack: (0xd539beb8 to 0xd539c000)
bea0:                                                       c02fc0e4 d7571000
bec0: d76c1640 d6dc8800 d757117c 00000000 d757112c c0305b04 d76c1690 d76c1640
bee0: d7571188 00000002 00000000 d7571000 d539a000 00000000 000dd1c8 c0305d54
bf00: d7571010 0160b868 00000002 c69d3900 d7573278 d7573308 c69d3900 c01ece90
bf20: 00000002 c0103fac c0103f6c d539bf88 00000002 c69d3b00 c69d3b0c c0103468
bf40: 00000000 00000000 d7694a00 00000002 000af408 d539bf88 c000dd84 c00b2f94
bf60: d7694a00 000af408 00000002 d7694a00 d7694a00 00000002 000af408 c000dd84
bf80: 00000000 c00b32d0 00000000 00000000 00000002 b6f1aa78 00000002 000af408
bfa0: 00000004 c000dc00 b6f1aa78 00000002 00000001 000af408 00000002 00000000
bfc0: b6f1aa78 00000002 000af408 00000004 be806a4c 000a6094 00000000 000dd1c8
bfe0: 00000000 be8069cc b6e8ab77 b6ec125c 40070010 00000001 22940489 154a5007
[<c03052e4>] (iio_compute_scan_bytes) from [<c0305b04>] (__iio_update_buffers+0x248/0x438)
[<c0305b04>] (__iio_update_buffers) from [<c0305d54>] (iio_buffer_store_enable+0x60/0x7c)
[<c0305d54>] (iio_buffer_store_enable) from [<c01ece90>] (dev_attr_store+0x18/0x24)
[<c01ece90>] (dev_attr_store) from [<c0103fac>] (sysfs_kf_write+0x40/0x4c)
[<c0103fac>] (sysfs_kf_write) from [<c0103468>] (kernfs_fop_write+0x110/0x154)
[<c0103468>] (kernfs_fop_write) from [<c00b2f94>] (vfs_write+0xd0/0x160)
[<c00b2f94>] (vfs_write) from [<c00b32d0>] (SyS_write+0x40/0x78)
[<c00b32d0>] (SyS_write) from [<c000dc00>] (ret_fast_syscall+0x0/0x30)
Code: ea00000e e1a01008 e1a00005 ebfff6fc (e5d0a016)

Fixes: 959d2952d124 ("staging:iio: make iio_sw_buffer_preenable much more general.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: st_sensors: Fix buffer copy

commit 4250c90b30b8bf2a1a21122ba0484f8f351f152d upstream.

Use byte_for_channel as iterator to properly initialize the buffer.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

OOM, PM: OOM killed task shouldn't escape PM suspend

commit 5695be142e203167e3cb515ef86a88424f3524eb upstream.

PM freezer relies on having all tasks frozen by the time devices are
getting frozen so that no task will touch them while they are getting
frozen. But OOM killer is allowed to kill an already frozen task in
order to handle OOM situtation. In order to protect from late wake ups
OOM killer is disabled after all tasks are frozen. This, however, still
keeps a window open when a killed task didn't manage to die by the time
freeze_processes finishes.

Reduce the race window by checking all tasks after OOM killer has been
disabled. This is still not race free completely unfortunately because
oom_killer_disable cannot stop an already ongoing OOM killer so a task
might still wake up from the fridge and get killed without
freeze_processes noticing. Full synchronization of OOM and freezer is,
however, too heavy weight for this highly unlikely case.

Introduce and check oom_kills counter which gets incremented early when
the allocator enters __alloc_pages_may_oom path and only check all the
tasks if the counter changes during the freezing attempt. The counter
is updated so early to reduce the race window since allocator checked
oom_killer_disabled which is set by PM-freezing code. A false positive
will push the PM-freezer into a slow path but that is not a big deal.

Changes since v1
- push the re-check loop out of freeze_processes into
  check_frozen_processes and invert the condition to make the code more
  readable as per Rafael

Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring)
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

freezer: Do not freeze tasks killed by OOM killer

commit 51fae6da640edf9d266c94f36bc806c63c301991 upstream.

Since f660daac474c6f (oom: thaw threads if oom killed thread is frozen
before deferring) OOM killer relies on being able to thaw a frozen task
to handle OOM situation but a3201227f803 (freezer: make freezing() test
freeze conditions in effect instead of TIF_FREEZE) has reorganized the
code and stopped clearing freeze flag in __thaw_task. This means that
the target task only wakes up and goes into the fridge again because the
freezing condition hasn't changed for it. This reintroduces the bug
fixed by f660daac474c6f.

Fix the issue by checking for TIF_MEMDIE thread flag in
freezing_slow_path and exclude the task from freezing completely. If a
task was already frozen it would get woken by __thaw_task from OOM killer
and get out of freezer after rechecking freezing().

Changes since v1
- put TIF_MEMDIE check into freezing_slowpath rather than in __refrigerator
  as per Oleg
- return __thaw_task into oom_scan_process_thread because
  oom_kill_process will not wake task in the fridge because it is
  sleeping uninterruptible

[mhocko@suse.cz: rewrote the changelog]
Fixes: a3201227f803 (freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE)
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_pstate: Correct BYT VID values.

commit d022a65ed2473fac4a600e3424503dc571160a3e upstream.

Using a VID value that is not high enough for the requested P state can
cause machine checks. Add a ceiling function to ensure calulated VIDs
with fractional values are set to the next highest integer VID value.

The algorythm for calculating the non-trubo VID from the BIOS writers
guide is:
 vid_ratio = (vid_max - vid_min) / (max_pstate - min_pstate)
 vid = ceiling(vid_min + (req_pstate - min_pstate) * vid_ratio)

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_pstate: Fix BYT frequency reporting

commit b27580b05e6f5253228debc60b8ff4a786ff573a upstream.

BYT has a different conversion from P state to frequency than the core
processors.  This causes the min/max and current frequency to be
misreported on some BYT SKUs. Tested on BYT N2820, Ivybridge and
Haswell processors.

Link: https://bugzilla.yoctoproject.org/show_bug.cgi?id=6663
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - add codec ID for Braswell display audio codec

commit d1585c89cecdb513f68045e47ab76976524b5961 upstream.

This patch adds codec ID (0x80862883) and module alias for Braswell
display codec.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - add PCI IDs for Intel Braswell

commit f31b2ffcad2b8c57cee5ffc634928bcbc8c6a558 upstream.

Add HD Audio Device PCI ID for the Intel Braswell platform.
It is an HDA Intel PCH controller.

AZX_DCAPS_ALIGN_BUFSIZE is not necessary for this controller.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/platform/intel/iosf: Add Braswell PCI ID

commit 849f5d894383d25c49132437aa289c9a9c98d5df upstream.

Add Braswell PCI ID to list of supported ID's for the IOSF driver.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1411017231-20807-2-git-send-email-david.e.box@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci: SDIO host controller support for Intel Quark X1000

commit 43e968cec79b6334cf7cb3e11184cce720541712 upstream.

This patch is to enable SDIO host controller for Intel Quark X1000.

Signed-off-by: Derek Browne <Derek.Browne@intel.com>
Signed-off-by: Alvin (Weike) Chen <alvin.chen@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Add cpu_detect_cache_sizes to init_intel() add Quark legacy_cache()

commit aece118e487a744eafcdd0c77fe32b55ee2092a1 upstream.

Intel processors which don't report cache information via cpuid(2)
or cpuid(4) need quirk code in the legacy_cache_size callback to
report this data. For Intel that callback is is intel_size_cache().

This patch enables calling of cpu_detect_cache_sizes() inside of
init_intel() and hence the calling of the legacy_cache callback in
intel_size_cache(). Adding this call will ensure that PIII Tualatin
currently in intel_size_cache() and Quark SoC X1000 being added to
intel_size_cache() in this patch will report their respective cache
sizes.

This model of calling cpu_detect_cache_sizes() is consistent with
AMD/Via/Cirix/Transmeta and Centaur.

Also added is a string to idenitfy the Quark as Quark SoC X1000
giving better and more descriptive output via /proc/cpuinfo

Adding cpu_detect_cache_sizes to init_intel() will enable calling
of intel_size_cache() on Intel processors which currently no code
can reach. Therefore this patch will also re-enable reporting
of PIII Tualatin cache size information as well as add
Quark SoC X1000 support.

Comment text and cache flow logic suggested by Thomas Gleixner

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: davej@redhat.com
Cc: hmh@hmh.eng.br
Link: http://lkml.kernel.org/r/1412641189-12415-3-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, iosf: Add PCI ID macros for better readability

commit 04725ad59474d24553d526fa774179ecd2922342 upstream.

Introduce PCI IDs macro for the list of supported product:
BayTrail & Quark X1000.

Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-5-git-send-email-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, iosf: Add Quark X1000 PCI ID

commit 90916e048c1e0c1d379577e43ab9b8e331490cfb upstream.

Add PCI device ID, i.e. that of the Host Bridge,
for IOSF MBI driver.

Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-4-git-send-email-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, iosf: Added Quark MBI identifiers

commit 7ef1def800e907edd28ddb1a5c64bae6b8749cdd upstream.

Added all the MBI units below and their associated read/write
opcodes:
 - Host Bridge Arbiter
 - Host Bridge
 - Remote Management Unit
 - Memory Manager & eSRAM
 - SoC Unit

Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-3-git-send-email-david.e.box@linux.intel.com
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, iosf: Make IOSF driver modular and usable by more drivers

commit 6b8f0c8780c71d78624f736d7849645b64cc88b7 upstream.

Currently drivers that run on non-IOSF systems (Core/Xeon) can't use the IOSF
driver on SOC's without selecting it which forces an unnecessary and limiting
dependency. Provides dummy functions to allow these modules to conditionally
use the driver on IOSF equipped platforms without impacting their ability to
compile and load on non-IOSF platforms. Build default m to ensure availability
on x86 SOC's.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1399668248-24199-2-git-send-email-david.e.box@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: intel_pstate: Add CPU ID for Braswell processor

commit 16405f98bca8eb39a23b3ce03e241ca19e7af370 upstream.

This is pretty much the same as Intel Baytrail, only the CPU ID is
different. Add the new ID to the supported CPU list.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_pstate: Add CPU IDs for Broadwell processors

commit c7e241df5970171e3e86a516f91ca8a30ca516e8 upstream.

Add support for Broadwell processors.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy

commit 36b4bed5cd8f6e17019fa7d380e0836872c7b367 upstream.

Code which changes policy to powersave changes also max_policy_pct based on
max_freq. Code which change max_perf_pct has upper limit base on value
max_policy_pct. When policy is changing from powersave back to performance
then max_policy_pct is not changed. Which means that changing max_perf_pct is
not possible to high values if max_freq was too low in powersave policy.

Test case:

$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
800000
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
3300000
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
100

$ echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
$ echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
$ echo 20 > /sys/devices/system/cpu/intel_pstate/max_perf_pct

$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
powersave
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
800000
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
20

$ echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
$ echo 3300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
$ echo 100 > /sys/devices/system/cpu/intel_pstate/max_perf_pct

$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
performance
$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
3300000
$ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct
24

And now intel_pstate driver allows to set maximal value for max_perf_pct based
on max_policy_pct which is 24 for previous powersave max_freq 800000.

This patch will set default value for max_policy_pct when setting policy to
performance so it will allow to set also max value for max_perf_pct.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers

commit c034b02e213d271b98c45c4a7b54af8f69aaac1e upstream.

Currently the core does not expose scaling_cur_freq for set_policy()
drivers this breaks some userspace monitoring tools.
Change the core to expose this file for all drivers and if the
set_policy() driver supports the get() callback use it to retrieve the
current frequency.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=73741
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix oops when loading block bitmap failed

commit 599a9b77ab289d85c2d5c8607624efbe1f552b0f upstream.

When we fail to load block bitmap in __ext4_new_inode() we will
dereference NULL pointer in ext4_journal_get_write_access(). So check
for error from ext4_read_block_bitmap().

Coverity-id: 989065
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: enable journal checksum when metadata checksum feature enabled

commit 98c1a7593fa355fda7f5a5940c8bf5326ca964ba upstream.

If metadata checksumming is turned on for the FS, we need to tell the
journal to use checksumming too.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overflow when updating superblock backups after resize

commit 9378c6768e4fca48971e7b6a9075bc006eda981d upstream.

When there are no meta block groups update_backups() will compute the
backup block in 32-bit arithmetics thus possibly overflowing the block
number and corrupting the filesystem. OTOH filesystems without meta
block groups larger than 16 TB should be rare. Fix the problem by doing
the counting in 64-bit arithmetics.

Coverity-id: 741252
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check s_chksum_driver when looking for bg csum presence

commit 813d32f91333e4c33d5a19b67167c4bae42dae75 upstream.

Convert the ext4_has_group_desc_csum predicate to look for a checksum
driver instead of the metadata_csum flag and change the bg checksum
calculation function to look for GDT_CSUM before taking the crc16
path.

Without this patch, if we mount with ^uninit_bg,^metadata_csum and
later metadata_csum gets turned on by accident, the block group
checksum functions will incorrectly assume that checksumming is
enabled (metadata_csum) but that crc16 should be used
(!s_chksum_driver).  This is totally wrong, so fix the predicate
and the checksum formula selection.

(Granted, if the metadata_csum feature bit gets enabled on a live FS
then something underhanded is going on, but we could at least avoid
writing garbage into the on-disk fields.)

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: Replace open coded mdata csum feature to helper function

commit 9aa5d32ba269bec0e7eaba2697a986a7b0bc8528 upstream.

Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized  csum machinery.

#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum  $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END

# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)

https://bugzilla.kernel.org/show_bug.cgi?id=82201

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix reservation overflow in ext4_da_write_begin

commit 0ff8947fc5f700172b37cbca811a38eb9cb81e08 upstream.

Delalloc write journal reservations only reserve 1 credit,
to update the inode if necessary.  However, it may happen
once in a filesystem's lifetime that a file will cross
the 2G threshold, and require the LARGE_FILE feature to
be set in the superblock as well, if it was not set already.

This overruns the transaction reservation, and can be
demonstrated simply on any ext4 filesystem without the LARGE_FILE
feature already set:

dd if=/dev/zero of=testfile bs=1 seek=2147483646 count=1 \
conv=notrunc of=testfile
sync
dd if=/dev/zero of=testfile bs=1 seek=2147483647 count=1 \
conv=notrunc of=testfile

leads to:

EXT4-fs: ext4_do_update_inode:4296: aborting transaction: error 28 in __ext4_handle_dirty_super
EXT4-fs error (device loop0) in ext4_do_update_inode:4301: error 28
EXT4-fs error (device loop0) in ext4_reserve_inode_write:4757: Readonly filesystem
EXT4-fs error (device loop0) in ext4_dirty_inode:4876: error 28
EXT4-fs error (device loop0) in ext4_da_write_end:2685: error 28

Adjust the number of credits based on whether the flag is
already set, and whether the current write may extend past the
LARGE_FILE limit.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add ext4_iget_normal() which is to be used for dir tree lookups

commit f4bb2981024fc91b23b4d09a8817c415396dbabb upstream.

If there is a corrupted file system which has directory entries that
point at reserved, metadata inodes, prohibit them from being used by
treating them the same way we treat Boot Loader inodes --- that is,
mark them to be bad inodes.  This prohibits them from being opened,
deleted, or modified via chmod, chown, utimes, etc.

In particular, this prevents a corrupted file system which has a
directory entry which points at the journal inode from being deleted
and its blocks released, after which point Much Hilarity Ensues.

Reported-by: Sami Liedes <sami.liedes@iki.fi>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT

commit 3e67cfad22230ebed85c56cbe413876f33fea82b upstream.

Otherwise this provokes complain like follows:
WARNING: CPU: 12 PID: 5795 at fs/ext4/ext4_jbd2.c:48 ext4_journal_check_start+0x4e/0xa0()
Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 5795 Comm: python Not tainted 3.17.0-rc2-00175-gae5344f #158
Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011
 0000000000000030 ffff8808116cfd28 ffffffff815c7dfc 0000000000000030
 0000000000000000 ffff8808116cfd68 ffffffff8106ce8c ffff8808116cfdc8
 ffff880813b16000 ffff880806ad6ae8 ffffffff81202008 0000000000000000
Call Trace:
 [<ffffffff815c7dfc>] dump_stack+0x51/0x6d
 [<ffffffff8106ce8c>] warn_slowpath_common+0x8c/0xc0
 [<ffffffff81202008>] ? ext4_ioctl+0x9e8/0xeb0
 [<ffffffff8106ceda>] warn_slowpath_null+0x1a/0x20
 [<ffffffff8122867e>] ext4_journal_check_start+0x4e/0xa0
 [<ffffffff81228c10>] __ext4_journal_start_sb+0x90/0x110
 [<ffffffff81202008>] ext4_ioctl+0x9e8/0xeb0
 [<ffffffff8107b0bd>] ? ptrace_stop+0x24d/0x2f0
 [<ffffffff81088530>] ? alloc_pid+0x480/0x480
 [<ffffffff8107b1f2>] ? ptrace_do_notify+0x92/0xb0
 [<ffffffff81186545>] do_vfs_ioctl+0x4e5/0x550
 [<ffffffff815cdbcb>] ? _raw_spin_unlock_irq+0x2b/0x40
 [<ffffffff81186603>] SyS_ioctl+0x53/0x80
 [<ffffffff815ce2ce>] tracesys+0xd0/0xd5

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix mmap data corruption when blocksize < pagesize

commit d6320cbfc92910a3e5f10c42d98c231c98db4f60 upstream.

Use truncate_isize_extended() when hole is being created in a file so that
->page_mkwrite() will get called for the partial tail page if it is
mmaped (see the first patch in the series for details).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: don't check quota format when there are no quota files

commit 279bf6d390933d5353ab298fcc306c391a961469 upstream.

The check whether quota format is set even though there are no
quota files with journalled quota is pointless and it actually
makes it impossible to turn off journalled quotas (as there's
no way to unset journalled quota format). Just remove the check.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check EA value offset when loading

commit a0626e75954078cfacddb00a4545dde821170bc5 upstream.

When loading extended attributes, check each entry's value offset to
make sure it doesn't collide with the entries.

Without this check it is easy to crash the kernel by mounting a
malicious FS containing a file with an EA wherein e_value_offs = 0 and
e_value_size > 0 and then deleting the EA, which corrupts the name
list.

(See the f_ea_value_crash test's FS image in e2fsprogs for an example.)

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: free bh when descriptor block checksum fails

commit 064d83892e9ba547f7d4eae22cbca066d95210ce upstream.

Free the buffer head if the journal descriptor block fails checksum
verification.

This is the jbd2 port of the e2fsprogs patch "e2fsck: free bh on csum
verify error in do_one_pass".

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qxl: don't create too large primary surface

commit c572aaf46f71f63ae5914d4e194a955e0ba1b519 upstream.

Limit primary to qemu vgamem size, to avoid reaching
qemu guest bug "requested primary larger than framebuffer"
on resizing screen too large to fit.

Remove unneeded and misleading variables.

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1127552

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: tlbex: Properly fix HUGE TLB Refill exception handler

commit 9e0f162a36914937a937358fcb45e0609ef2bfc4 upstream.

In commit 8393c524a25609 (MIPS: tlbex: Fix a missing statement for
HUGETLB), the TLB Refill handler was fixed so that non-OCTEON targets
would work properly with huge pages.  The change was incorrect in that
it broke the OCTEON case.

The problem is shown here:

    xxx0: df7a0000  ld k0,0(k1)
    .
    .
    .
    xxxc0: df610000  ld at,0(k1)
    xxxc4: 335a0ff0  andi k0,k0,0xff0
    xxxc8: e825ffcd  bbit1 at,0x5,0x0
    xxxcc: 003ad82d  daddu k1,at,k0
    .
    .
    .

In the non-octeon case there is a destructive test for the huge PTE
bit, and then at 0, $k0 is reloaded (that is what the 8393c524a25609
patch added).

In the octeon case, we modify k1 in the branch delay slot, but we
never need k0 again, so the new load is not needed, but since k1 is
modified, if we do the load, we load from a garbage location and then
get a nested TLB Refill, which is seen in userspace as either SIGBUS
or SIGSEGV (depending on the garbage).

The real fix is to only do this reloading if it is needed, and never
where it is harmful.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8151/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: ftrace: Fix a microMIPS build problem

commit aedd153f5bb5b1f1d6d9142014f521ae2ec294cc upstream.

Code before the .fixup section needs to have the .insn directive.
This has no side effects on MIPS32/64 but it affects the way microMIPS
loads the address for the return label.

Fixes the following build problem:
mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between
ISA modes; consider recompiling with interlinking enabled.
mips-linux-gnu-ld: final link failed: Bad value
Makefile:819: recipe for target 'vmlinux' failed

The fix is similar to 1658f914ff91c3bf ("MIPS: microMIPS:
Disable LL/SC and fix linker bug.")

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8117/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix APTPL metadata handling for dynamic MappedLUNs

commit e24805637d2d270d7975502e9024d473de86afdb upstream.

This patch fixes a bug in handling of SPC-3 PR Activate Persistence
across Target Power Loss (APTPL) logic where re-creation of state for
MappedLUNs from dynamically generated NodeACLs did not occur during
I_T Nexus establishment.

It adds the missing core_scsi3_check_aptpl_registration() call during
core_tpg_check_initiator_node_acl() -> core_tpg_add_node_to_devs() in
order to replay any pre-loaded APTPL metadata state associated with
the newly connected SCSI Initiator Port.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE

commit 082f58ac4a48d3f5cb4597232cb2ac6823a96f43 upstream.

During temporary resource starvation at lower transport layer, command
is placed on queue full retry path, which expose this problem.  The TCM
queue full handling of SCF_TRANSPORT_TASK_SENSE currently sends the same
cmd twice to lower layer.  The 1st time led to cmd normal free path.
The 2nd time cause Null pointer access.

This regression bug was originally introduced v3.1-rc code in the
following commit:

commit e057f53308a5f071556ee80586b99ee755bf07f5
Author: Christoph Hellwig <hch@infradead.org>
Date:   Mon Oct 17 13:56:41 2011 -0400

    target: remove the transport_qf_callback se_cmd callback

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qla_target: don't delete changed nacls

commit f4c24db1b7ad0ce84409e15744d26c6f86a96840 upstream.

The code is currently riddled with "drop the hardware_lock to avoid a
deadlock" bugs that expose races.  One of those races seems to expose a
valid warning in tcm_qla2xxx_clear_nacl_from_fcport_map.  Add some
bandaid to it.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: Disable caches in early boot if so configured

commit ef680cdc24376f394841a3f19b3a7ef6d57a009d upstream.

Requested-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: fix mmuv2 warning

commit d75386363ee60eb51c933c7b5e536f3a502ad7d7 upstream.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: [SMP] General Fixes

commit c3441edd2dea83923421fd6050d2ffdc57696323 upstream.

-Pass the expected arg to non-boot park'ing routine
 (It worked so far because existing SMP backends don't use the arg)

-CONFIG_DEBUG_PREEMPT warning

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: Update order of registers in KGDB to match GDB 7.5

commit ebc0c74e76cec9c4dd860eb0ca1c0b39dc63c482 upstream.

Order of registers has changed in GDB moving from 6.8 to 7.5. This patch
updates KGDB to work properly with GDB 7.5, though makes it incompatible
with 6.8.

Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: [nsimosci] Allow "headless" models to boot

commit 5c05483e2db91890faa9a7be0a831701a3f442d6 upstream.

There are certain test configuration of virtual platform which don't
have any real console device (uart/pgu). So add tty0 as a fallback console
device to allow system to boot and be accessible via telnet

Otherwise with ttyS0 as only console, but 8250 disabled in kernel build,
init chokes.

Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: vmx: handle invvpid vm exit gracefully

commit a642fc305053cc1c6e47e4f4df327895747ab485 upstream.

On systems with invvpid instruction support (corresponding bit in
IA32_VMX_EPT_VPID_CAP MSR is set) guest invocation of invvpid
causes vm exit, which is currently not handled and results in
propagation of unknown exit to userspace.

Fix this by installing an invvpid vm exit handler.

This is CVE-2014-3646.

Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Emulator fixes for eip canonical checks on near branches

commit 234f3ce485d54017f15cf5e0699cff4100121601 upstream.

Before changing rip (during jmp, call, ret, etc.) the target should be asserted
to be canonical one, as real CPUs do.  During sysret, both target rsp and rip
should be canonical. If any of these values is noncanonical, a #GP exception
should occur.  The exception to this rule are syscall and sysenter instructions
in which the assigned rip is checked during the assignment to the relevant
MSRs.

This patch fixes the emulator to behave as real CPUs do for near branches.
Far branches are handled by the next patch.

This fixes CVE-2014-3647.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Fix wrong masking on relative jump/call

commit 05c83ec9b73c8124555b706f6af777b10adf0862 upstream.

Relative jumps and calls do the masking according to the operand size, and not
according to the address size as the KVM emulator does today.

This patch fixes KVM behavior.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: don't kill guest on unknown exit reason

commit 2bc19dc3754fc066c43799659f0d848631c44cfe upstream.

KVM_EXIT_UNKNOWN is a kvm bug, we don't really know whether it was
triggered by a priveledged application.  Let's not kill the guest: WARN
and inject #UD instead.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Check non-canonical addresses upon WRMSR

commit 854e8bb1aa06c578c2c9145fa6bfe3680ef63b23 upstream.

Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is
written to certain MSRs. The behavior is "almost" identical for AMD and Intel
(ignoring MSRs that are not implemented in either architecture since they would
anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if
non-canonical address is written on Intel but not on AMD (which ignores the top
32-bits).

Accordingly, this patch injects a #GP on the MSRs which behave identically on
Intel and AMD.  To eliminate the differences between the architecutres, the
value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to
canonical value before writing instead of injecting a #GP.

Some references from Intel and AMD manuals:

According to Intel SDM description of WRMSR instruction #GP is expected on
WRMSR "If the source register contains a non-canonical address and ECX
specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE,
IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP."

According to AMD manual instruction manual:
LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the
LSTAR and CSTAR registers.  If an RIP written by WRMSR is not in canonical
form, a general-protection exception (#GP) occurs."
IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the
base field must be in canonical form or a #GP fault will occur."
IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must
be in canonical form."

This patch fixes CVE-2014-3610.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Improve thread safety in pit

commit 2febc839133280d5a5e8e1179c94ea674489dae2 upstream.

There's a race condition in the PIT emulation code in KVM.  In
__kvm_migrate_pit_timer the pit_timer object is accessed without
synchronization.  If the race condition occurs at the wrong time this
can crash the host kernel.

This fixes CVE-2014-3611.

Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Prevent host from panicking on shared MSR writes.

commit 8b3c3104c3f4f706e99365c3e0d2aa61b95f969f upstream.

The previous patch blocked invalid writes directly when the MSR
is written.  As a precaution, prevent future similar mistakes by
gracefulling handle GPs caused by writes to shared MSRs.

Signed-off-by: Andrew Honig <ahonig@google.com>
[Remove parts obsoleted by Nadav's patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: fix excessive pages un-pinning in kvm_iommu_map error path.

commit 3d32e4dbe71374a6780eaf51d719d76f9a9bf22f upstream.

The third parameter of kvm_unpin_pages() when called from
kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin
and not the page size.

This error was facilitated with an inconsistent API: kvm_pin_pages() takes
a size, but kvn_unpin_pages() takes a number of pages, so fix the problem
by matching the two.

This was introduced by commit 350b8bd ("kvm: iommu: fix the third parameter
of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of
un-pinning for pages intended to be un-pinned (i.e. memory leak) but
unfortunately potentially aggravated the number of pages we un-pin that
should have stayed pinned. As far as I understand though, the same
practical mitigations apply.

This issue was found during review of Red Hat 6.6 patches to prepare
Ksplice rebootless updates.

Thanks to Vegard for his time on a late Friday evening to help me in
understanding this code.

Fixes: 350b8bd ("kvm: iommu: fix the third parameter of... (CVE-2014-3601)")
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Reviewed-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: tda7432: Fix setting TDA7432_MUTE bit for TDA7432_RF register

commit 91ba0e59babdb3c7aca836a65f1095b3eaff7b06 upstream.

Fix a copy-paste bug when converting to the control framework.

Fixes: commit 5d478e0de871 ("[media] tda7432: convert to the control framework")

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ds3000: fix LNB supply voltage on Tevii S480 on initialization

commit 8c5bcded11cb607b1bb5920de3b9c882136d27db upstream.

The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not
automatically power down. This blocks other receivers connected
to a satellite channel router (EN50494), since the receivers can not send the
required DiSEqC sequences when the Tevii card is connected to a the same SCR.

This patch switches off the LNB supply voltage on initialization of the frontend.

[mchehab@osg.samsung.com: add a comment about why we're explicitly
 turning off voltage at device init]
Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx-v4l: give back all active video buffers to the vb2 core properly on streaming stop

commit 627530c32a43283474e9dd3e954519410ffa033a upstream.

When a new video frame is started, the driver takes the next video buffer from
the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf
for further processing.

On streaming stop we currently only give back the pending buffers from the list
but not the ones which are currently processed.

This causes the following warning from the vb2 core since kernel 3.15:

...
 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]()
 [...]
 Call Trace:
  [<c0769c46>] dump_stack+0x48/0x69
  [<c0245b69>] warn_slowpath_common+0x79/0x90
  [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<c0245bfd>] warn_slowpath_null+0x1d/0x20
  [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core]
  [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core]
  [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core]
  [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev]
  [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<c039d0e7>] ? fsnotify+0x1e7/0x2b0
  [<f8e49012>] video_ioctl2+0x12/0x20 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev]
  [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev]
  [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0
  [<c0368eec>] ? vfs_write+0x13c/0x1c0
  [<c0369a8f>] ? vfs_writev+0x2f/0x50
  [<c0379028>] SyS_ioctl+0x58/0x80
  [<c076fff3>] sysenter_do_call+0x12/0x12
 ---[ end trace 5545f934409f13f4 ]---
...

Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled
this long standing issue and who has investigated it further.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: m88ts2022: fix 32bit overflow on filter calc

commit f538e085138e519e25ae0828bd6c6e7492ce8ca4 upstream.

Maximum satellite symbol rate used is 45000000Sps which overflows
when multiplied by 135. As final calculation result is fraction,
we could use mult_frac macro in order to keep calculation inside
32 bit number limits and prevent overflow.

Original bug and fix was provided by Nibble Max. I decided to
implement it differently as it is now.

Reported-by: Nibble Max <nibble.max@gmail.com>
Tested-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx: check if a device has audio earlier"

commit fb91bde9d3664dd879655f3a1013c0b5728e7a09 upstream.

GIT_AUTHOR_DATE=1409603039
This reverts

commit b99f0aadd33fad269c8e62b5bec8b5c012a44a56
Author: Mauro Carvalho Chehab <m.chehab@samsung.com>

    [media] em28xx: check if a device has audio earlier

    Better to split chipset detection from the audio setup. So, move the
    detection code to em28xx_init_dev().

It broke analog audio of the Hauppauge winTV HVR 900 and very likely many other
em28xx devices.

Background:
The local variable has_audio in em28xx_usb_probe() describes if the currently
probed _usb_interface_ has an audio endpoint, while dev->audio_mode.has_audio
means that the _device_ as a whole provides analog audio.
Hence it is wrong to set dev->audio_mode.has_audio = has_audio in em28xx_usb_probe().
As result, audio support is no longer detected and configured on devices which
have the audio endpoint on a separate interface, because em28xx_audio_setup()
bails out immediately at the beginning.

Revert the faulty commit to restore the old audio detection procedure, which checks
the chip configuration register to determine if the device has analog audio.

Cc: <stable@vger.kernel.org> # 3.14 to 3.16
Reported-by: Oravecz Csaba <oravecz@nytud.mta.hu>
Tested-by: Oravecz Csaba <oravecz@nytud.mta.hu>
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: usb: uvc: add a quirk for Dell XPS M1330 webcam

commit 62ea864f84fed6e04dd033d500d4c9183a83d590 upstream.

As reported on [1], this device needs this quirk to be able to
reliably initialise the webcam.

[1] http://ubuntuforums.org/showthread.php?t=2145996

Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-common: fix overflow in v4l_bound_align_image()

commit 3bacc10cd4a85bc70bc0b6c001d3bf995c7fe04c upstream.

Fix clamp_align() used in v4l_bound_align_image() to prevent overflow
when passed large value like UINT32_MAX.

 In the current implementation:
    clamp_align(UINT32_MAX, 8, 8192, 3)

returns 8, because in line:

    x = (x + (1 << (align - 1))) & mask;

x overflows to (-1 + 4) & 0x7 = 3, while expected value is 8192.

v4l_bound_align_image() is heavily used in VIDIOC_S_FMT and
VIDIOC_SUBDEV_S_FMT ioctls handlers, and documentation of the latter
explicitly states that:

"The modified format should be as close as possible to the original
request."
  -- http://linuxtv.org/downloads/v4l-dvb-apis/vidioc-subdev-g-fmt.html

Thus one would expect, that passing UINT32_MAX as format width and
height will result in setting maximum possible resolution for the
device. Particularly, when the driver doesn't support
VIDIOC_ENUM_FRAMESIZES ioctl, which is common in the codebase.

Fixes changeset: b0d3159be9a3

Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/bios: memset dcb struct to zero before parsing

commit 595d373f1e9c9ce0fc946457fdb488e8a58972cd upstream.

Fixes type/mask calculation being based on uninitialised data for VGA
outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: don't warn if backlight unexpectedly enabled

commit 813008cd3e93ea8a571b2b7d5b9360a3105b50f7 upstream.

BIOS or firmware can modify hardware state during suspend/resume,
for example on the Toshiba CB35 or Lenovo T400, so log a debug message
instead of a warning if the backlight is unexpectedly enabled.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80930
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tilcdc: Fix the error path in tilcdc_load()

commit b478e336b3e75505707a11e78ef8b964ef0a03af upstream.

The current error path calls tilcdc_unload() in case of an error to release
the resources. However, this is wrong because not all resources have been
allocated by the time an error occurs in tilcdc_load().

To fix it, this commit adds proper labels to bail out at the different
stages in the load function, and release only the resources actually allocated.

Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: 3a49012224ca ("drm/tilcdc: panel: fix leak when unloading the module")
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix drm.h include

commit e351943b081f4d9e6f692ce1a6117e8d2e71f478 upstream.

The userspace drm.h include doesn't prefix the drm directory.  This can lead
to compile failures as /usr/include/drm/ isn't in the standard gcc include
paths.  Fix it to be <drm/drm.h>, which matches the rest of the driver drm
header files that get installed into /usr/include/drm.

Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1138759

Fixes: 1d7a5cbf8f74e
Reported-by: Jeffrey Bastian <jbastian@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Fix HW cursor image

commit 1e99cfa8de0f0879091e33cd65fd60418d006ad9 upstream.

The translation from the X driver to the KMS one typo'ed a couple
of array indices, causing the HW cursor to look weird (blocky with
leaking edge colors). This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544

commit 993b3a3f80a7842a48cd46c2b41e1b3ef6302468 upstream.

These models need i8042.notimeout, otherwise the touchpad will not work.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add noloop quirk for Asus X750LN

commit 9ff84a17302aeb8913ff244ecc0d8f9d219fecb5 upstream.

Without this the aux port does not get detected, and consequently the
touchpad will not work.

https://bugzilla.redhat.com/show_bug.cgi?id=1110011

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

framebuffer: fix border color

commit f74a289b9480648a654e5afd8458c2263c03a1e1 upstream.

The framebuffer code uses the current background color to fill the border
when switching consoles, however, this results in inconsistent behavior.
For example:
- start Midnigh Commander
- the border is black
- switch to another console and switch back
- the border is cyan
- type something into the command line in mc
- the border is cyan
- switch to another console and switch back
- the border is black
- press F9 to go to menu
- the border is black
- switch to another console and switch back
- the border is dark blue

When switching to a console with Midnight Commander, the border is random
color that was left selected by the slang subsystem.

This patch fixes this inconsistency by always using black as the
background color when switching consoles.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

modules, lock around setting of MODULE_STATE_UNFORMED

commit d3051b489aa81ca9ba62af366149ef42b8dae97c upstream.

A panic was seen in the following sitation.

There are two threads running on the system. The first thread is a system
monitoring thread that is reading /proc/modules. The second thread is
loading and unloading a module (in this example I'm using my simple
dummy-module.ko).  Note, in the "real world" this occurred with the qlogic
driver module.

When doing this, the following panic occurred:

 ------------[ cut here ]------------
 kernel BUG at kernel/module.c:3739!
 invalid opcode: 0000 [#1] SMP
 Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module]
 CPU: 37 PID: 186343 Comm: cat Tainted: GF          O--------------   3.10.0+ #7
 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
 task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000
 RIP: 0010:[<ffffffff810d64c5>]  [<ffffffff810d64c5>] module_flags+0xb5/0xc0
 RSP: 0018:ffff88080fa7fe18  EFLAGS: 00010246
 RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000
 RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000
 RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000
 R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000
 R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000
 FS:  00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c
  ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00
  ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0
 Call Trace:
  [<ffffffff810d666c>] m_show+0x19c/0x1e0
  [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0
  [<ffffffff812281ed>] proc_reg_read+0x3d/0x80
  [<ffffffff811c0f2c>] vfs_read+0x9c/0x170
  [<ffffffff811c1a58>] SyS_read+0x58/0xb0
  [<ffffffff81605829>] system_call_fastpath+0x16/0x1b
 Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41
 RIP  [<ffffffff810d64c5>] module_flags+0xb5/0xc0
  RSP <ffff88080fa7fe18>

    Consider the two processes running on the system.

    CPU 0 (/proc/modules reader)
    CPU 1 (loading/unloading module)

    CPU 0 opens /proc/modules, and starts displaying data for each module by
    traversing the modules list via fs/seq_file.c:seq_open() and
    fs/seq_file.c:seq_read().  For each module in the modules list, seq_read
    does

            op->start()  <-- this is a pointer to m_start()
            op->show()   <- this is a pointer to m_show()
            op->stop()   <-- this is a pointer to m_stop()

    The m_start(), m_show(), and m_stop() module functions are defined in
    kernel/module.c. The m_start() and m_stop() functions acquire and release
    the module_mutex respectively.

    ie) When reading /proc/modules, the module_mutex is acquired and released
    for each module.

    m_show() is called with the module_mutex held.  It accesses the module
    struct data and attempts to write out module data.  It is in this code
    path that the above BUG_ON() warning is encountered, specifically m_show()
    calls

    static char *module_flags(struct module *mod, char *buf)
    {
            int bx = 0;

            BUG_ON(mod->state == MODULE_STATE_UNFORMED);
    ...

    The other thread, CPU 1, in unloading the module calls the syscall
    delete_module() defined in kernel/module.c.  The module_mutex is acquired
    for a short time, and then released.  free_module() is called without the
    module_mutex.  free_module() then sets mod->state = MODULE_STATE_UNFORMED,
    also without the module_mutex.  Some additional code is called and then the
    module_mutex is reacquired to remove the module from the modules list:

        /* Now we can delete it from the lists */
        mutex_lock(&module_mutex);
        stop_machine(__unlink_module, mod, NULL);
        mutex_unlock(&module_mutex);

This is the sequence of events that leads to the panic.

CPU 1 is removing dummy_module via delete_module().  It acquires the
module_mutex, and then releases it.  CPU 1 has NOT set dummy_module->state to
MODULE_STATE_UNFORMED yet.

CPU 0, which is reading the /proc/modules, acquires the module_mutex and
acquires a pointer to the dummy_module which is still in the modules list.
CPU 0 calls m_show for dummy_module.  The check in m_show() for
MODULE_STATE_UNFORMED passed for dummy_module even though it is being
torn down.

Meanwhile CPU 1, which has been continuing to remove dummy_module without
holding the module_mutex, now calls free_module() and sets
dummy_module->state to MODULE_STATE_UNFORMED.

CPU 0 now calls module_flags() with dummy_module and ...

static char *module_flags(struct module *mod, char *buf)
{
        int bx = 0;

        BUG_ON(mod->state == MODULE_STATE_UNFORMED);

and BOOM.

Acquire and release the module_mutex lock around the setting of
MODULE_STATE_UNFORMED in the teardown path, which should resolve the
problem.

Testing: In the unpatched kernel I can panic the system within 1 minute by
doing

while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done

and

while (true) do cat /proc/modules; done

in separate terminals.

In the patched kernel I was able to run just over one hour without seeing
any issues.  I also verified the output of panic via sysrq-c and the output
of /proc/modules looks correct for all three states for the dummy_module.

        dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-)
        dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE)
        dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+)

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm log userspace: fix memory leak in dm_ulog_tfr_init failure path

commit 56ec16cb1e1ce46354de8511eef962a417c32c92 upstream.

If cn_add_callback() fails in dm_ulog_tfr_init(), it does not
deallocate prealloced memory but calls cn_del_callback().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix alignment_offset math that assumes io_min is a power-of-2

commit b8839b8c55f3fdd60dc36abcda7e0266aff7985c upstream.

The math in both blk_stack_limits() and queue_limit_alignment_offset()
assume that a block device's io_min (aka minimum_io_size) is always a
power-of-2.  Fix the math such that it works for non-power-of-2 io_min.

This issue (of alignment_offset != 0) became apparent when testing
dm-thinp with a thinp blocksize that matches a RAID6 stripesize of
1280K.  Commit fdfb4c8c1 ("dm thin: set minimum_io_size to pool's data
block size") unlocked the potential for alignment_offset != 0 due to
the dm-thin-pool's io_min possibly being a non-power-of-2.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drbd: compute the end before rb_insert_augmented()

commit 82cfb90bc99d7b7e0ec62d0505b9d4f06805d5db upstream.

Commit 98683650 "Merge branch 'drbd-8.4_ed6' into
for-3.8-drivers-drbd-8.4_ed6" switches to the new augment API, but the
new API requires that the tree is augmented before rb_insert_augmented()
is called, which is missing.

So we add the augment-code to drbd_insert_interval() when it travels the
tree up to down before rb_insert_augmented().  See the example in
include/linux/interval_tree_generic.h or Documentation/rbtree.txt.

drbd_insert_interval() may cancel the insertion when traveling, in this
case, the just added augment-code does nothing before cancel since the
@this node is already in the subtrees in this case.

CC: Michel Lespinasse <walken@google.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm bufio: when done scanning return from __scan immediately

commit 0e825862f3c04cee40e25f55680333728a4ffa9b upstream.

When __scan frees the required number of buffer entries that the
shrinker requested (nr_to_scan becomes zero) it must return.  Before
this fix the __scan code exited only the inner loop and continued in the
outer loop -- which could result in reduced performance due to extra
buffers being freed (e.g. unnecessarily evicted thinp metadata needing
to be synchronously re-read into bufio's cache).

Also, move dm_bufio_cond_resched to __scan's inner loop, so that
iterating the bufio client's lru lists doesn't result in scheduling
latency.

Reported-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm bufio: update last_accessed when relinking a buffer

commit eb76faf53b1ff7a77ce3f78cc98ad392ac70c2a0 upstream.

The 'last_accessed' member of the dm_buffer structure was only set when
the the buffer was created.  This led to each buffer being discarded
after dm_bufio_max_age time even if it was used recently.  In practice
this resulted in all thinp metadata being evicted soon after being read
-- this is particularly problematic for metadata intensive workloads
like multithreaded small random IO.

'last_accessed' is now updated each time the buffer is moved to the head
of the LRU list, so the buffer is now properly discarded if it was not
used in dm_bufio_max_age time.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/cirrus: bind also to qemu-xen-traditional

commit c0c3e735fa7bae29c6623511127fd021b2d6d849 upstream.

qemu as used by xend/xm toolstack uses a different subvendor id.
Bind the drm driver also to this emulated card.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: fix leak on grant map error path

commit 61cecca865280bef4f8a9748d0a9afa5df351ac2 upstream.

Fix leaking a page when a grant mapping has failed.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-and-Tested-by: Tao Chen <boby.chen@huawei.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_pci: fix virtio spec compliance on restore

commit 6fbc198cf623944ab60a1db6d306a4d55cdd820d upstream.

On restore, virtio pci does the following:
+ set features
+ init vqs etc - device can be used at this point!
+ set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits

This is in violation of the virtio spec, which
requires the following order:
- ACKNOWLEDGE
- DRIVER
- init vqs
- DRIVER_OK

This behaviour will break with hypervisors that assume spec compliant
behaviour.  It seems like a good idea to have this patch applied to
stable branches to reduce the support butden for the hypervisors.

Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>