Filipe Manana [Mon, 22 Nov 2021 12:03:38 +0000 (12:03 +0000)]
btrfs: make send work with concurrent block group relocation
commit
d96b34248c2f4ea8cd09286090f2f6f77102eaab upstream.
We don't allow send and balance/relocation to run in parallel in order
to prevent send failing or silently producing some bad stream. This is
because while send is using an extent (specially metadata) or about to
read a metadata extent and expecting it belongs to a specific parent
node, relocation can run, the transaction used for the relocation is
committed and the extent gets reallocated while send is still using the
extent, so it ends up with a different content than expected. This can
result in just failing to read a metadata extent due to failure of the
validation checks (parent transid, level, etc), failure to find a
backreference for a data extent, and other unexpected failures. Besides
reallocation, there's also a similar problem of an extent getting
discarded when it's unpinned after the transaction used for block group
relocation is committed.
The restriction between balance and send was added in commit
9e967495e0e0
("Btrfs: prevent send failures and crashes due to concurrent relocation"),
kernel 5.3, while the more general restriction between send and relocation
was added in commit
1cea5cf0e664 ("btrfs: ensure relocation never runs
while we have send operations running"), kernel 5.14.
Both send and relocation can be very long running operations. Relocation
because it has to do a lot of IO and expensive backreference lookups in
case there are many snapshots, and send due to read IO when operating on
very large trees. This makes it inconvenient for users and tools to deal
with scheduling both operations.
For zoned filesystem we also have automatic block group relocation, so
send can fail with -EAGAIN when users least expect it or send can end up
delaying the block group relocation for too long. In the future we might
also get the automatic block group relocation for non zoned filesystems.
This change makes it possible for send and relocation to run in parallel.
This is achieved the following way:
1) For all tree searches, send acquires a read lock on the commit root
semaphore;
2) After each tree search, and before releasing the commit root semaphore,
the leaf is cloned and placed in the search path (struct btrfs_path);
3) After releasing the commit root semaphore, the changed_cb() callback
is invoked, which operates on the leaf and writes commands to the pipe
(or file in case send/receive is not used with a pipe). It's important
here to not hold a lock on the commit root semaphore, because if we did
we could deadlock when sending and receiving to the same filesystem
using a pipe - the send task blocks on the pipe because it's full, the
receive task, which is the only consumer of the pipe, triggers a
transaction commit when attempting to create a subvolume or reserve
space for a write operation for example, but the transaction commit
blocks trying to write lock the commit root semaphore, resulting in a
deadlock;
4) Before moving to the next key, or advancing to the next change in case
of an incremental send, check if a transaction used for relocation was
committed (or is about to finish its commit). If so, release the search
path(s) and restart the search, to where we were before, so that we
don't operate on stale extent buffers. The search restarts are always
possible because both the send and parent roots are RO, and no one can
add, remove of update keys (change their offset) in RO trees - the
only exception is deduplication, but that is still not allowed to run
in parallel with send;
5) Periodically check if there is contention on the commit root semaphore,
which means there is a transaction commit trying to write lock it, and
release the semaphore and reschedule if there is contention, so as to
avoid causing any significant delays to transaction commits.
This leaves some room for optimizations for send to have less path
releases and re searching the trees when there's relocation running, but
for now it's kept simple as it performs quite well (on very large trees
with resulting send streams in the order of a few hundred gigabytes).
Test case btrfs/187, from fstests, stresses relocation, send and
deduplication attempting to run in parallel, but without verifying if send
succeeds and if it produces correct streams. A new test case will be added
that exercises relocation happening in parallel with send and then checks
that send succeeds and the resulting streams are correct.
A final note is that for now this still leaves the mutual exclusion
between send operations and deduplication on files belonging to a root
used by send operations. A solution for that will be slightly more complex
but it will eventually be built on top of this change.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Zimmermann [Thu, 3 Feb 2022 09:39:22 +0000 (10:39 +0100)]
drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP
commit
3755d35ee1d2454b20b8a1e20d790e56201678a4 upstream.
As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.
arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
`panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
`drm_panel_dp_aux_backlight'
make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1
The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]
v2:
* fix and expand commit description (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes:
9d6366e743f3 ("drm: fb_helper: improve CONFIG_FB dependency")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/
Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.de
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Li Huafei [Thu, 10 Mar 2022 12:09:15 +0000 (20:09 +0800)]
x86/traps: Mark do_int3() NOKPROBE_SYMBOL
commit
a365a65f9ca1ceb9cf1ac29db4a4f51df7c507ad upstream.
Since kprobe_int3_handler() is called in do_int3(), probing do_int3()
can cause a breakpoint recursion and crash the kernel. Therefore,
do_int3() should be marked as NOKPROBE_SYMBOL.
Fixes:
21e28290b317 ("x86/traps: Split int3 handler up")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220310120915.63349-1-lihuafei1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jarkko Sakkinen [Thu, 3 Mar 2022 22:38:58 +0000 (00:38 +0200)]
x86/sgx: Free backing memory after faulting the enclave page
commit
08999b2489b4c9b939d7483dbd03702ee4576d96 upstream.
There is a limited amount of SGX memory (EPC) on each system. When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code. Instead of
swapping to disk, SGX swaps from EPC to normal RAM. That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code. There is a hierarchy like this:
EPC <-> shmem <-> disk
After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed. Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running. The
memory is recovered when the enclave is destroyed and the backing
storage freed.
Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC. In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.
Cc: stable@vger.kernel.org
Fixes:
1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220303223859.273187-1-jarkko@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ross Philipson [Thu, 24 Feb 2022 02:07:36 +0000 (21:07 -0500)]
x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
commit
445c1470b6ef96440e7cfc42dfc160f5004fd149 upstream.
The x86 boot documentation describes the setup_indirect structures and
how they are used. Only one of the two functions in ioremap.c that needed
to be modified to be aware of the introduction of setup_indirect
functionality was updated. Adds comparable support to the other function
where it was missing.
Fixes:
b3c72fc9a78e ("x86/boot: Introduce setup_indirect")
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645668456-22036-3-git-send-email-ross.philipson@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ross Philipson [Thu, 24 Feb 2022 02:07:35 +0000 (21:07 -0500)]
x86/boot: Fix memremap of setup_indirect structures
commit
7228918b34615ef6317edcd9a058a057bc54aa32 upstream.
As documented, the setup_indirect structure is nested inside
the setup_data structures in the setup_data list. The code currently
accesses the fields inside the setup_indirect structure but only
the sizeof(struct setup_data) is being memremapped. No crash
occurred but this is just due to how the area is remapped under the
covers.
Properly memremap both the setup_data and setup_indirect structures
in these cases before accessing them.
Fixes:
b3c72fc9a78e ("x86/boot: Introduce setup_indirect")
Signed-off-by: Ross Philipson <ross.philipson@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1645668456-22036-2-git-send-email-ross.philipson@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 11 Mar 2022 13:24:47 +0000 (13:24 +0000)]
watch_queue: Make comment about setting ->defunct more accurate
commit
4edc0760412b0c4ecefc7e02cb855b310b122825 upstream.
watch_queue_clear() has a comment stating that setting ->defunct to true
preventing new additions as well as preventing notifications. Whilst
the latter is true, the first bit is superfluous since at the time this
function is called, the pipe cannot be accessed to add new event
sources.
Remove the "new additions" bit from the comment.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 11 Mar 2022 13:24:36 +0000 (13:24 +0000)]
watch_queue: Fix lack of barrier/sync/lock between post and read
commit
2ed147f015af2b48f41c6f0b6746aa9ea85c19f3 upstream.
There's nothing to synchronise post_one_notification() versus
pipe_read(). Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.
Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().
If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 11 Mar 2022 13:24:29 +0000 (13:24 +0000)]
watch_queue: Free the alloc bitmap when the watch_queue is torn down
commit
7ea1a0124b6da246b5bc8c66cddaafd36acf3ecb upstream.
Free the watch_queue note allocation bitmap when the watch_queue is
destroyed.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 11 Mar 2022 13:24:22 +0000 (13:24 +0000)]
watch_queue: Fix the alloc bitmap size to reflect notes allocated
commit
3b4c0371928c17af03e8397ac842346624017ce6 upstream.
Currently, watch_queue_set_size() sets the number of notes available in
wqueue->nr_notes according to the number of notes allocated, but sets
the size of the bitmap to the unrounded number of notes originally asked
for.
Fix this by setting the bitmap size to the number of notes we're
actually going to make available (ie. the number allocated).
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 11 Mar 2022 13:24:08 +0000 (13:24 +0000)]
watch_queue: Fix to always request a pow-of-2 pipe ring size
commit
96a4d8912b28451cd62825fd7caa0e66e091d938 upstream.
The pipe ring size must always be a power of 2 as the head and tail
pointers are masked off by AND'ing with the size of the ring - 1.
watch_queue_set_size(), however, lets you specify any number of notes
between 1 and 511. This number is passed through to pipe_resize_ring()
without checking/forcing its alignment.
Fix this by rounding the number of slots required up to the nearest
power of two. The request is meant to guarantee that at least that many
notifications can be generated before the queue is full, so rounding
down isn't an option, but, alternatively, it may be better to give an
error if we aren't allowed to allocate that much ring space.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 11 Mar 2022 13:23:46 +0000 (13:23 +0000)]
watch_queue: Fix to release page in ->release()
commit
c1853fbadcba1497f4907971e7107888e0714c81 upstream.
When a pipe ring descriptor points to a notification message, the
refcount on the backing page is incremented by the generic get function,
but the release function, which marks the bitmap, doesn't drop the page
ref.
Fix this by calling generic_pipe_buf_release() at the end of
watch_queue_pipe_buf_release().
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 11 Mar 2022 13:23:38 +0000 (13:23 +0000)]
watch_queue, pipe: Free watchqueue state after clearing pipe ring
commit
db8facfc9fafacefe8a835416a6b77c838088f8b upstream.
In free_pipe_info(), free the watchqueue state after clearing the pipe
ring as each pipe ring descriptor has a release function, and in the
case of a notification message, this is watch_queue_pipe_buf_release()
which tries to mark the allocation bitmap that was previously released.
Fix this by moving the put of the pipe's ref on the watch queue to after
the ring has been cleared. We still need to call watch_queue_clear()
before doing that to make sure that the pipe is disconnected from any
notification sources first.
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Fri, 11 Mar 2022 13:23:31 +0000 (13:23 +0000)]
watch_queue: Fix filter limit check
commit
c993ee0f9f81caf5767a50d1faeba39a0dc82af2 upstream.
In watch_queue_set_filter(), there are a couple of places where we check
that the filter type value does not exceed what the type_filter bitmap
can hold. One place calculates the number of bits by:
if (tf[i].type >= sizeof(wfilter->type_filter) * 8)
which is fine, but the second does:
if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)
which is not. This can lead to a couple of out-of-bounds writes due to
a too-large type:
(1) __set_bit() on wfilter->type_filter
(2) Writing more elements in wfilter->filters[] than we allocated.
Fix this by just using the proper WATCH_TYPE__NR instead, which is the
number of types we actually know about.
The bug may cause an oops looking something like:
BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740
Write of size 4 at addr
ffff88800d2c66bc by task watch_queue_oob/611
...
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x150
...
kasan_report.cold+0x7f/0x11b
...
watch_queue_set_filter+0x659/0x740
...
__x64_sys_ioctl+0x127/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 611:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
watch_queue_set_filter+0x23a/0x740
__x64_sys_ioctl+0x127/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at
ffff88800d2c66a0
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 28 bytes inside of
32-byte region [
ffff88800d2c66a0,
ffff88800d2c66c0)
Fixes:
c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King (Oracle) [Fri, 11 Mar 2022 17:13:17 +0000 (17:13 +0000)]
ARM: fix Thumb2 regression with Spectre BHB
commit
6c7cb60bff7aec24b834343ff433125f469886a3 upstream.
When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.
Fixes:
b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dima Chumak [Mon, 17 Jan 2022 13:32:16 +0000 (15:32 +0200)]
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
commit
39bab83b119faac4bf7f07173a42ed35be95147e upstream.
Only prio 1 is supported for nic mode when there is no ignore flow level
support in firmware. But for switchdev mode, which supports fixed number
of statically pre-allocated prios, this restriction is not relevant so
it can be relaxed.
Fixes:
d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Fri, 14 Jan 2022 19:58:41 +0000 (14:58 -0500)]
virtio: acknowledge all features before access
commit
4fa59ede95195f267101a1b8916992cf3f245cdb upstream.
The feature negotiation was designed in a way that
makes it possible for devices to know which config
fields will be accessed by drivers.
This is broken since commit
404123c2db79 ("virtio: allow drivers to
validate features") with fallout in at least block and net. We have a
partial work-around in commit
2f9a174f918e ("virtio: write back
F_VERSION_1 before validate") which at least lets devices find out which
format should config space have, but this is a partial fix: guests
should not access config space without acknowledging features since
otherwise we'll never be able to change the config space format.
To fix, split finalize_features from virtio_finalize_features and
call finalize_features with all feature bits before validation,
and then - if validation changed any bits - once again after.
Since virtio_finalize_features no longer writes out features
rename it to virtio_features_ok - since that is what it does:
checks that features are ok with the device.
As a side effect, this also reduces the amount of hypervisor accesses -
we now only acknowledge features once unless we are clearing any
features when validating (which is uncommon).
IRC I think that this was more or less always the intent in the spec but
unfortunately the way the spec is worded does not say this explicitly, I
plan to address this at the spec level, too.
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
404123c2db79 ("virtio: allow drivers to validate features")
Fixes:
2f9a174f918e ("virtio: write back F_VERSION_1 before validate")
Cc: "Halil Pasic" <pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael S. Tsirkin [Fri, 14 Jan 2022 19:56:15 +0000 (14:56 -0500)]
virtio: unexport virtio_finalize_features
commit
838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream.
virtio_finalize_features is only used internally within virtio.
No reason to export it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrei Vagin [Fri, 15 Oct 2021 16:32:21 +0000 (09:32 -0700)]
KVM: x86/mmu: kvm_faultin_pfn has to return false if pfh is returned
commit
a7cc099f2ec3117678adeb69749bef7e9dde3148 upstream.
This looks like a typo in
8f32d5e563cb. This change didn't intend to do
any functional changes.
The problem was caught by gVisor tests.
Fixes:
8f32d5e563cb ("KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Message-Id: <
20211015163221.472508-1-avagin@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Halil Pasic [Sat, 5 Mar 2022 17:07:14 +0000 (18:07 +0100)]
swiotlb: rework "fix info leak with DMA_FROM_DEVICE"
commit
aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13 upstream.
Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.
The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
must take precedence over DMA_ATTR_SKIP_CPU_SYNC
Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.
Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.
To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes:
ddbd89deb7d3 ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Semel [Tue, 8 Mar 2022 09:30:58 +0000 (10:30 +0100)]
arm64: kasan: fix include error in MTE functions
commit
b859ebedd1e730bbda69142fca87af4e712649a1 upstream.
Fix `error: expected string literal in 'asm'`.
This happens when compiling an ebpf object file that includes
`net/net_namespace.h` from linux kernel headers.
Include trace:
include/net/net_namespace.h:10
include/linux/workqueue.h:9
include/linux/timer.h:8
include/linux/debugobjects.h:6
include/linux/spinlock.h:90
include/linux/workqueue.h:9
arch/arm64/include/asm/spinlock.h:9
arch/arm64/include/generated/asm/qrwlock.h:1
include/asm-generic/qrwlock.h:14
arch/arm64/include/asm/processor.h:33
arch/arm64/include/asm/kasan.h:9
arch/arm64/include/asm/mte-kasan.h:45
arch/arm64/include/asm/mte-def.h:14
Signed-off-by: Paul Semel <paul.semel@datadoghq.com>
Fixes:
2cb34276427a ("arm64: kasan: simplify and inline MTE functions")
Cc: <stable@vger.kernel.org> # 5.12.x
Link: https://lore.kernel.org/r/bacb5387-2992-97e4-0c48-1ed925905bee@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin Marinas [Thu, 3 Mar 2022 18:00:44 +0000 (18:00 +0000)]
arm64: Ensure execute-only permissions are not allowed without EPAN
commit
6e2edd6371a497a6350bb735534c9bda2a31f43d upstream.
Commit
18107f8a2df6 ("arm64: Support execute-only permissions with
Enhanced PAN") re-introduced execute-only permissions when EPAN is
available. When EPAN is not available, arch_filter_pgprot() is supposed
to change a PAGE_EXECONLY permission into PAGE_READONLY_EXEC. However,
if BTI or MTE are present, such check does not detect the execute-only
pgprot in the presence of PTE_GP (BTI) or MT_NORMAL_TAGGED (MTE),
allowing the user to request PROT_EXEC with PROT_BTI or PROT_MTE.
Remove the arch_filter_pgprot() function, change the default VM_EXEC
permissions to PAGE_READONLY_EXEC and update the protection_map[] array
at core_initcall() if EPAN is detected.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes:
18107f8a2df6 ("arm64: Support execute-only permissions with Enhanced PAN")
Cc: <stable@vger.kernel.org> # 5.13.x
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pali Rohár [Thu, 10 Mar 2022 10:39:23 +0000 (11:39 +0100)]
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
commit
a1cc1697bb56cdf880ad4d17b79a39ef2c294bc9 upstream.
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.
Since commit
64f160e19e92 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.
So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.
Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.
Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes:
76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Saenz Julienne [Mon, 7 Mar 2022 18:07:40 +0000 (19:07 +0100)]
tracing/osnoise: Force quiescent states while tracing
commit
caf4c86bf136845982c5103b2661751b40c474c0 upstream.
At the moment running osnoise on a nohz_full CPU or uncontested FIFO
priority and a PREEMPT_RCU kernel might have the side effect of
extending grace periods too much. This will entice RCU to force a
context switch on the wayward CPU to end the grace period, all while
introducing unwarranted noise into the tracer. This behaviour is
unavoidable as overly extending grace periods might exhaust the system's
memory.
This same exact problem is what extended quiescent states (EQS) were
created for, conversely, rcu_momentary_dyntick_idle() emulates them by
performing a zero duration EQS. So let's make use of it.
In the common case rcu_momentary_dyntick_idle() is fairly inexpensive:
atomically incrementing a local per-CPU counter and doing a store. So it
shouldn't affect osnoise's measurements (which has a 1us granularity),
so we'll call it unanimously.
The uncommon case involve calling rcu_momentary_dyntick_idle() after
having the osnoise process:
- Receive an expedited quiescent state IPI with preemption disabled or
during an RCU critical section. (activates rdp->cpu_no_qs.b.exp
code-path).
- Being preempted within in an RCU critical section and having the
subsequent outermost rcu_read_unlock() called with interrupts
disabled. (t->rcu_read_unlock_special.b.blocked code-path).
Neither of those are possible at the moment, and are unlikely to be in
the future given the osnoise's loop design. On top of this, the noise
generated by the situations described above is unavoidable, and if not
exposed by rcu_momentary_dyntick_idle() will be eventually seen in
subsequent rcu_read_unlock() calls or schedule operations.
Link: https://lkml.kernel.org/r/20220307180740.577607-1-nsaenzju@redhat.com
Cc: stable@vger.kernel.org
Fixes:
bce29ac9ce0b ("trace: Add osnoise tracer")
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emil Renner Berthing [Wed, 23 Feb 2022 19:12:57 +0000 (20:12 +0100)]
riscv: Fix auipc+jalr relocation range checks
commit
0966d385830de3470b7131db8e86c0c5bc9c52dc upstream.
RISC-V can do PC-relative jumps with a 32bit range using the following
two instructions:
auipc t0, imm20 ; t0 = PC + imm20 * 2^12
jalr ra, t0, imm12 ; ra = PC + 4, PC = t0 + imm12
Crucially both the 20bit immediate imm20 and the 12bit immediate imm12
are treated as two's-complement signed values. For this reason the
immediates are usually calculated like this:
imm20 = (offset + 0x800) >> 12
imm12 = offset & 0xfff
..where offset is the signed offset from the auipc instruction. When
the 11th bit of offset is 0 the addition of 0x800 doesn't change the top
20 bits and imm12 considered positive. When the 11th bit is 1 the carry
of the addition by 0x800 means imm20 is one higher, but since imm12 is
then considered negative the two's complement representation means it
all cancels out nicely.
However, this addition by 0x800 (2^11) means an offset greater than or
equal to 2^31 - 2^11 would overflow so imm20 is considered negative and
result in a backwards jump. Similarly the lower range of offset is also
moved down by 2^11 and hence the true 32bit range is
[-2^31 - 2^11, 2^31 - 2^11)
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Fixes:
e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rong Chen [Wed, 16 Feb 2022 12:42:39 +0000 (20:42 +0800)]
mmc: meson: Fix usage of meson_mmc_post_req()
commit
f0d2f15362f02444c5d7ffd5a5eb03e4aa54b685 upstream.
Currently meson_mmc_post_req() is called in meson_mmc_request() right
after meson_mmc_start_cmd(). This could lead to DMA unmapping before the request
is actually finished.
To fix, don't call meson_mmc_post_req() until meson_mmc_request_done().
Signed-off-by: Rong Chen <rong.chen@amlogic.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Fixes:
79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220216124239.4007667-1-rong.chen@amlogic.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jisheng Zhang [Thu, 10 Feb 2022 16:49:43 +0000 (00:49 +0800)]
riscv: alternative only works on !XIP_KERNEL
commit
c80ee64a8020ef1a6a92109798080786829b8994 upstream.
The alternative mechanism needs runtime code patching, it can't work
on XIP_KERNEL. And the errata workarounds are implemented via the
alternative mechanism. So add !XIP_KERNEL dependency for alternative
and erratas.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes:
44c922572952 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Thu, 3 Mar 2022 18:10:27 +0000 (12:10 -0600)]
net: macb: Fix lost RX packet wakeup race in NAPI receive
commit
0bf476fc3624e3a72af4ba7340d430a91c18cd67 upstream.
There is an oddity in the way the RSR register flags propagate to the
ISR register (and the actual interrupt output) on this hardware: it
appears that RSR register bits only result in ISR being asserted if the
interrupt was actually enabled at the time, so enabling interrupts with
RSR bits already set doesn't trigger an interrupt to be raised. There
was already a partial fix for this race in the macb_poll function where
it checked for RSR bits being set and re-triggered NAPI receive.
However, there was a still a race window between checking RSR and
actually enabling interrupts, where a lost wakeup could happen. It's
necessary to check again after enabling interrupts to see if RSR was set
just prior to the interrupt being enabled, and re-trigger receive in that
case.
This issue was noticed in a point-to-point UDP request-response protocol
which periodically saw timeouts or abnormally high response times due to
received packets not being processed in a timely fashion. In many
applications, more packets arriving, including TCP retransmissions, would
cause the original packet to be processed, thus masking the issue.
Fixes:
02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done")
Cc: stable@vger.kernel.org
Co-developed-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Scott McNutt <scott.mcnutt@siriusxm.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 28 Feb 2022 07:43:31 +0000 (10:43 +0300)]
staging: gdm724x: fix use after free in gdm_lte_rx()
commit
fc7f750dc9d102c1ed7bbe4591f991e770c99033 upstream.
The netif_rx_ni() function frees the skb so we can't dereference it to
save the skb->len.
Fixes:
61e121047645 ("staging: gdm7240: adding LTE USB driver")
Cc: stable <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220228074331.GA13685@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Wed, 2 Mar 2022 10:16:36 +0000 (11:16 +0100)]
staging: rtl8723bs: Fix access-point mode deadlock
commit
8f4347081be32e67b0873827e0138ab0fdaaf450 upstream.
Commit
54659ca026e5 ("staging: rtl8723bs: remove possible deadlock when
disconnect (v2)") split the locking of pxmitpriv->lock vs sleep_q/lock
into 2 locks in attempt to fix a lockdep reported issue with the locking
order of the sta_hash_lock vs pxmitpriv->lock.
But in the end this turned out to not fully solve the sta_hash_lock issue
so commit
a7ac783c338b ("staging: rtl8723bs: remove a second possible
deadlock") was added to fix this in another way.
The original fix was kept as it was still seen as a good thing to have,
but now it turns out that it creates a deadlock in access-point mode:
[Feb20 23:47] ======================================================
[ +0.074085] WARNING: possible circular locking dependency detected
[ +0.074077] 5.16.0-1-amd64 #1 Tainted: G C E
[ +0.064710] ------------------------------------------------------
[ +0.074075] ksoftirqd/3/29 is trying to acquire lock:
[ +0.060542]
ffffb8b30062ab00 (&pxmitpriv->lock){+.-.}-{2:2}, at: rtw_xmit_classifier+0x8a/0x140 [r8723bs]
[ +0.114921]
but task is already holding lock:
[ +0.069908]
ffffb8b3007ab704 (&psta->sleep_q.lock){+.-.}-{2:2}, at: wakeup_sta_to_xmit+0x3b/0x300 [r8723bs]
[ +0.116976]
which lock already depends on the new lock.
[ +0.098037]
the existing dependency chain (in reverse order) is:
[ +0.089704]
-> #1 (&psta->sleep_q.lock){+.-.}-{2:2}:
[ +0.077232] _raw_spin_lock_bh+0x34/0x40
[ +0.053261] xmitframe_enqueue_for_sleeping_sta+0xc1/0x2f0 [r8723bs]
[ +0.082572] rtw_xmit+0x58b/0x940 [r8723bs]
[ +0.056528] _rtw_xmit_entry+0xba/0x350 [r8723bs]
[ +0.062755] dev_hard_start_xmit+0xf1/0x320
[ +0.056381] sch_direct_xmit+0x9e/0x360
[ +0.052212] __dev_queue_xmit+0xce4/0x1080
[ +0.055334] ip6_finish_output2+0x18f/0x6e0
[ +0.056378] ndisc_send_skb+0x2c8/0x870
[ +0.052209] ndisc_send_ns+0xd3/0x210
[ +0.050130] addrconf_dad_work+0x3df/0x5a0
[ +0.055338] process_one_work+0x274/0x5a0
[ +0.054296] worker_thread+0x52/0x3b0
[ +0.050124] kthread+0x16c/0x1a0
[ +0.044925] ret_from_fork+0x1f/0x30
[ +0.049092]
-> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[ +0.074101] __lock_acquire+0x10f5/0x1d80
[ +0.054298] lock_acquire+0xd7/0x300
[ +0.049088] _raw_spin_lock_bh+0x34/0x40
[ +0.053248] rtw_xmit_classifier+0x8a/0x140 [r8723bs]
[ +0.066949] rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[ +0.066946] rtl8723bs_hal_xmitframe_enqueue+0x14/0x50 [r8723bs]
[ +0.078386] wakeup_sta_to_xmit+0xa6/0x300 [r8723bs]
[ +0.065903] rtw_recv_entry+0xe36/0x1160 [r8723bs]
[ +0.063809] rtl8723bs_recv_tasklet+0x349/0x6c0 [r8723bs]
[ +0.071093] tasklet_action_common.constprop.0+0xe5/0x110
[ +0.070966] __do_softirq+0x16f/0x50a
[ +0.050134] __irq_exit_rcu+0xeb/0x140
[ +0.051172] irq_exit_rcu+0xa/0x20
[ +0.047006] common_interrupt+0xb8/0xd0
[ +0.052214] asm_common_interrupt+0x1e/0x40
[ +0.056381] finish_task_switch.isra.0+0x100/0x3a0
[ +0.063670] __schedule+0x3ad/0xd20
[ +0.048047] schedule+0x4e/0xc0
[ +0.043880] smpboot_thread_fn+0xc4/0x220
[ +0.054298] kthread+0x16c/0x1a0
[ +0.044922] ret_from_fork+0x1f/0x30
[ +0.049088]
other info that might help us debug this:
[ +0.095950] Possible unsafe locking scenario:
[ +0.070952] CPU0 CPU1
[ +0.054282] ---- ----
[ +0.054285] lock(&psta->sleep_q.lock);
[ +0.047004] lock(&pxmitpriv->lock);
[ +0.074082] lock(&psta->sleep_q.lock);
[ +0.077209] lock(&pxmitpriv->lock);
[ +0.043873]
*** DEADLOCK ***
[ +0.070950] 1 lock held by ksoftirqd/3/29:
[ +0.049082] #0:
ffffb8b3007ab704 (&psta->sleep_q.lock){+.-.}-{2:2}, at: wakeup_sta_to_xmit+0x3b/0x300 [r8723bs]
Analysis shows that in hindsight the splitting of the lock was not
a good idea, so revert this to fix the access-point mode deadlock.
Note this is a straight-forward revert done with git revert, the commented
out "/* spin_lock_bh(&psta_bmc->sleep_q.lock); */" lines were part of the
code before the reverted changes.
Fixes:
54659ca026e5 ("staging: rtl8723bs: remove possible deadlock when disconnect (v2)")
Cc: stable <stable@vger.kernel.org>
Cc: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215542
Link: https://lore.kernel.org/r/20220302101637.26542-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Mon, 7 Mar 2022 15:30:44 +0000 (16:30 +0100)]
fuse: fix pipe buffer lifetime for direct_io
commit
0c4bcfdecb1ac0967619ee7ff44871d93c08c909 upstream.
In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.
On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.
This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.
Fix by copying pages coming from the user address space to new pipe
buffers.
Reported-by: Jann Horn <jannh@google.com>
Fixes:
c3021629a0d8 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Fri, 18 Feb 2022 10:47:51 +0000 (11:47 +0100)]
fuse: fix fileattr op failure
commit
a679a61520d8a7b0211a1da990404daf5cc80b72 upstream.
The fileattr API conversion broke lsattr on ntfs3g.
Previously the ioctl(... FS_IOC_GETFLAGS) returned an EINVAL error, but
after the conversion the error returned by the fuse filesystem was not
propagated back to the ioctl() system call, resulting in success being
returned with bogus values.
Fix by checking for outarg.result in fuse_priv_ioctl(), just as generic
ioctl code does.
Reported-by: Jean-Pierre André <jean-pierre.andre@wanadoo.fr>
Fixes:
72227eac177d ("fuse: convert to fileattr")
Cc: <stable@vger.kernel.org> # v5.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Randy Dunlap [Fri, 11 Mar 2022 19:49:12 +0000 (11:49 -0800)]
ARM: Spectre-BHB: provide empty stub for non-config
commit
68453767131a5deec1e8f9ac92a9042f929e585d upstream.
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.
Fixes this build error:
arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'
Fixes:
b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Kravetz [Sat, 26 Feb 2022 03:11:26 +0000 (19:11 -0800)]
selftests/memfd: clean up mapping in mfd_fail_write
[ Upstream commit
fda153c89af344d21df281009a9d046cf587ea0f ]
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aneesh Kumar K.V [Sat, 26 Feb 2022 03:11:08 +0000 (19:11 -0800)]
selftest/vm: fix map_fixed_noreplace test failure
[ Upstream commit
f39c58008dee7ab5fc94c3f1995a21e886801df0 ]
On the latest RHEL the test fails due to executable mapped at 256MB
address
# ./map_fixed_noreplace
mmap() @ 0x10000000-0x10050000 p=0xffffffffffffffff result=File exists
10000000-
10010000 r-xp
00000000 fd:04
34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10010000-
10020000 r--p
00000000 fd:04
34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10020000-
10030000 rw-p
00010000 fd:04
34905657 /root/rpmbuild/BUILD/kernel-5.14.0-56.el9/linux-5.14.0-56.el9.ppc64le/tools/testing/selftests/vm/map_fixed_noreplace
10029b90000-
10029bc0000 rw-p
00000000 00:00 0 [heap]
7fffbb510000-
7fffbb750000 r-xp
00000000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb750000-
7fffbb760000 r--p
00230000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb760000-
7fffbb770000 rw-p
00240000 fd:04 24534 /usr/lib64/libc.so.6
7fffbb780000-
7fffbb7a0000 r--p
00000000 00:00 0 [vvar]
7fffbb7a0000-
7fffbb7b0000 r-xp
00000000 00:00 0 [vdso]
7fffbb7b0000-
7fffbb800000 r-xp
00000000 fd:04 24514 /usr/lib64/ld64.so.2
7fffbb800000-
7fffbb810000 r--p
00040000 fd:04 24514 /usr/lib64/ld64.so.2
7fffbb810000-
7fffbb820000 rw-p
00050000 fd:04 24514 /usr/lib64/ld64.so.2
7fffd93f0000-
7fffd9420000 rw-p
00000000 00:00 0 [stack]
Error: couldn't map the space we need for the test
Fix this by finding a free address using mmap instead of hardcoding
BASE_ADDRESS.
Link: https://lkml.kernel.org/r/20220217083417.373823-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Jann Horn <jannh@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Bristot de Oliveira [Fri, 18 Feb 2022 15:17:38 +0000 (16:17 +0100)]
tracing/osnoise: Make osnoise_main to sleep for microseconds
[ Upstream commit
dd990352f01ee9a6c6eee152e5d11c021caccfe4 ]
osnoise's runtime and period are in the microseconds scale, but it is
currently sleeping in the millisecond's scale. This behavior roots in the
usage of hwlat as the skeleton for osnoise.
Make osnoise to sleep in the microseconds scale. Also, move the sleep to
a specialized function.
Link: https://lkml.kernel.org/r/302aa6c7bdf2d131719b22901905e9da122a11b2.1645197336.git.bristot@kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Mon, 14 Feb 2022 13:44:56 +0000 (14:44 +0100)]
tracing: Ensure trace buffer is at least 4096 bytes large
[ Upstream commit
7acf3a127bb7c65ff39099afd78960e77b2ca5de ]
Booting the kernel with 'trace_buf_size=1' give a warning at
boot during the ftrace selftests:
[ 0.892809] Running postponed tracer tests:
[ 0.892893] Testing tracer function:
[ 0.901899] Callback from call_rcu_tasks_trace() invoked.
[ 0.983829] Callback from call_rcu_tasks_rude() invoked.
[ 1.072003] .. bad ring buffer .. corrupted trace buffer ..
[ 1.091944] Callback from call_rcu_tasks() invoked.
[ 1.097695] PASSED
[ 1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED!
[ 1.353474] ------------[ cut here ]------------
[ 1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0
Therefore enforce a minimum of 4096 bytes to make the selftest pass.
Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niels Dossche [Wed, 23 Feb 2022 13:19:56 +0000 (14:19 +0100)]
ipv6: prevent a possible race condition with lifetimes
[ Upstream commit
6c0d8833a605e195ae219b5042577ce52bf71fff ]
valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Marczykowski-Górecki [Tue, 22 Feb 2022 00:18:17 +0000 (01:18 +0100)]
Revert "xen-netback: Check for hotplug-status existence before watching"
[ Upstream commit
e8240addd0a3919e0fd7436416afe9aa6429c484 ]
This reverts commit
2afeec08ab5c86ae21952151f726bfe184f6b23d.
The reasoning in the commit was wrong - the code expected to setup the
watch even if 'hotplug-status' didn't exist. In fact, it relied on the
watch being fired the first time - to check if maybe 'hotplug-status' is
already set to 'connected'. Not registering a watch for non-existing
path (which is the case if hotplug script hasn't been executed yet),
made the backend not waiting for the hotplug script to execute. This in
turns, made the netfront think the interface is fully operational, while
in fact it was not (the vif interface on xen-netback side might not be
configured yet).
This was a workaround for 'hotplug-status' erroneously being removed.
But since that is reverted now, the workaround is not necessary either.
More discussion at
https://lore.kernel.org/xen-devel/
afedd7cb-a291-e773-8b0d-
4db9b291fa98@ipxe.org/T/#u
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Marczykowski-Górecki [Tue, 22 Feb 2022 00:18:16 +0000 (01:18 +0100)]
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
[ Upstream commit
0f4558ae91870692ce7f509c31c9d6ee721d8cdc ]
This reverts commit
1f2565780e9b7218cf92c7630130e82dcc0fe9c2.
The 'hotplug-status' node should not be removed as long as the vif
device remains configured. Otherwise the xen-netback would wait for
re-running the network script even if it was already called (in case of
the frontent re-connecting). But also, it _should_ be removed when the
vif device is destroyed (for example when unbinding the driver) -
otherwise hotplug script would not configure the device whenever it
re-appear.
Moving removal of the 'hotplug-status' node was a workaround for nothing
calling network script after xen-netback module is reloaded. But when
vif interface is re-created (on xen-netback unbind/bind for example),
the script should be called, regardless of who does that - currently
this case is not handled by the toolstack, and requires manual
script call. Keeping hotplug-status=connected to skip the call is wrong
and leads to not configured interface.
More discussion at
https://lore.kernel.org/xen-devel/
afedd7cb-a291-e773-8b0d-
4db9b291fa98@ipxe.org/T/#u
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guchun Chen [Fri, 18 Feb 2022 05:05:26 +0000 (13:05 +0800)]
drm/amdgpu: bypass tiling flag check in virtual display case (v2)
[ Upstream commit
e2b993302f40c4eb714ecf896dd9e1c5be7d4cd7 ]
vkms leverages common amdgpu framebuffer creation, and
also as it does not support FB modifier, there is no need
to check tiling flags when initing framebuffer when virtual
display is enabled.
This can fix below calltrace:
amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier
WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu]
v2: check adev->enable_virtual_display instead as vkms can be
enabled in bare metal as well.
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shreeya Patel [Wed, 16 Feb 2022 20:26:55 +0000 (01:56 +0530)]
gpio: Return EPROBE_DEFER if gc->to_irq is NULL
[ Upstream commit
ae42f9288846353982e2eab181fb41e7fd8bf60f ]
We are racing the registering of .to_irq when probing the
i2c driver. This results in random failure of touchscreen
devices.
Following explains the race condition better.
[gpio driver] gpio driver registers gpio chip
[gpio consumer] gpio is acquired
[gpio consumer] gpiod_to_irq() fails with -ENXIO
[gpio driver] gpio driver registers irqchip
gpiod_to_irq works at this point, but -ENXIO is fatal
We could see the following errors in dmesg logs when gc->to_irq is NULL
[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ
[2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22
To avoid this situation, defer probing until to_irq is registered.
Returning -EPROBE_DEFER would be the first step towards avoiding
the failure of devices due to the race in registration of .to_irq.
Final solution to this issue would be to avoid using gc irq members
until they are fully initialized.
This issue has been reported many times in past and people have been
using workarounds like changing the pinctrl_amd to built-in instead
of loading it as a module or by adding a softdep for pinctrl_amd into
the config file.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209413
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Tue, 22 Feb 2022 16:08:01 +0000 (11:08 -0500)]
PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken
[ Upstream commit
3f1271b54edcc692da5a3663f2aa2a64781f9bc3 ]
There are enough VBIOS escapes without the proper workaround that some
users still hit this. Microsoft never productized ATS on Windows so OEM
platforms that were Windows-only didn't always validate ATS.
The advantages of ATS are not worth it compared to the potential
instabilities on harvested boards. Disable ATS on all Navi10 and Navi14
boards.
Symptoms include:
amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000]
AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000]
[drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049
amdgpu 0000:07:00.0: amdgpu: GPU reset begin!
amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume
amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110
amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed
Related commits:
e8946a53e2a6 ("PCI: Mark AMD Navi14 GPU ATS as broken")
a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken")
9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken")
[bhelgaas: add symptoms and related commits]
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760
Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vikash Chandola [Tue, 22 Feb 2022 13:12:53 +0000 (13:12 +0000)]
hwmon: (pmbus) Clear pmbus fault/warning bits after read
[ Upstream commit
35f165f08950a876f1b95a61d79c93678fba2fd6 ]
Almost all fault/warning bits in pmbus status registers remain set even
after fault/warning condition are removed. As per pmbus specification
these faults must be cleared by user.
Modify hwmon behavior to clear fault/warning bit after fetching data if
fault/warning bit was set. This allows to get fresh data in next read.
Signed-off-by: Vikash Chandola <vikash.chandola@linux.intel.com>
Link: https://lore.kernel.org/r/20220222131253.2426834-1-vikash.chandola@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
suresh kumar [Thu, 17 Feb 2022 01:55:18 +0000 (07:25 +0530)]
net-sysfs: add check for netdevice being present to speed_show
[ Upstream commit
4224cfd7fb6523f7a9d1c8bb91bb5df1e38eb624 ]
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.
[ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called
[ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called
...
[ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 758.031397] IP: [<
ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
crash> bt
...
PID: 12649 TASK:
ffff8924108f2100 CPU: 1 COMMAND: "amsd"
...
#9 [
ffff89240e1a38b0] page_fault at
ffffffff8f38c778
[exception RIP: dma_pool_alloc+0x1ab]
RIP:
ffffffff8ee11acb RSP:
ffff89240e1a3968 RFLAGS:
00010046
RAX:
0000000000000246 RBX:
ffff89243d874100 RCX:
0000000000001000
RDX:
0000000000000000 RSI:
0000000000000246 RDI:
ffff89243d874090
RBP:
ffff89240e1a39c0 R8:
000000000001f080 R9:
ffff8905ffc03c00
R10:
ffffffffc04680d4 R11:
ffffffff8edde9fd R12:
00000000000080d0
R13:
ffff89243d874090 R14:
ffff89243d874080 R15:
0000000000000000
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
#10 [
ffff89240e1a39c8] mlx5_alloc_cmd_msg at
ffffffffc04680f3 [mlx5_core]
#11 [
ffff89240e1a3a18] cmd_exec at
ffffffffc046ad62 [mlx5_core]
#12 [
ffff89240e1a3ab8] mlx5_cmd_exec at
ffffffffc046b4fb [mlx5_core]
#13 [
ffff89240e1a3ae8] mlx5_core_access_reg at
ffffffffc0475434 [mlx5_core]
#14 [
ffff89240e1a3b40] mlx5e_get_fec_caps at
ffffffffc04a7348 [mlx5_core]
#15 [
ffff89240e1a3bb0] get_fec_supported_advertised at
ffffffffc04992bf [mlx5_core]
#16 [
ffff89240e1a3c08] mlx5e_get_link_ksettings at
ffffffffc049ab36 [mlx5_core]
#17 [
ffff89240e1a3ce8] __ethtool_get_link_ksettings at
ffffffff8f25db46
#18 [
ffff89240e1a3d48] speed_show at
ffffffff8f277208
#19 [
ffff89240e1a3dd8] dev_attr_show at
ffffffff8f0b70e3
#20 [
ffff89240e1a3df8] sysfs_kf_seq_show at
ffffffff8eedbedf
#21 [
ffff89240e1a3e18] kernfs_seq_show at
ffffffff8eeda596
#22 [
ffff89240e1a3e28] seq_read at
ffffffff8ee76d10
#23 [
ffff89240e1a3e98] kernfs_fop_read at
ffffffff8eedaef5
#24 [
ffff89240e1a3ed8] vfs_read at
ffffffff8ee4e3ff
#25 [
ffff89240e1a3f08] sys_read at
ffffffff8ee4f27f
#26 [
ffff89240e1a3f50] system_call_fastpath at
ffffffff8f395f92
crash> net_device.state
ffff89443b0c0000
state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER)
To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wanpeng Li [Fri, 18 Feb 2022 08:10:38 +0000 (00:10 -0800)]
x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU
[ Upstream commit
ec756e40e271866f951d77c5e923d8deb6002b15 ]
Inspired by commit
3553ae5690a (x86/kvm: Don't use pvqspinlock code if
only 1 vCPU), on a VM with only 1 vCPU, there is no need to enable
pv tlb/ipi/sched_yield and we can save the memory for __pv_cpu_mask.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1645171838-2855-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Ripard [Thu, 27 Jan 2022 11:14:52 +0000 (12:14 +0100)]
drm/vc4: hdmi: Unregister codec device on unbind
[ Upstream commit
e40945ab7c7f966d0c37b7bd7b0596497dfe228d ]
On bind we will register the HDMI codec device but we don't unregister
it on unbind, leading to a device leakage. Unregister our device at
unbind.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127111452.222002-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jon Lin [Wed, 16 Feb 2022 01:40:24 +0000 (09:40 +0800)]
spi: rockchip: terminate dma transmission when slave abort
[ Upstream commit
80808768e41324d2e23de89972b5406c1020e6e4 ]
After slave abort, all DMA should be stopped, or it will affect the
next transmission and maybe abort again.
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-3-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jon Lin [Wed, 16 Feb 2022 01:40:23 +0000 (09:40 +0800)]
spi: rockchip: Fix error in getting num-cs property
[ Upstream commit
9382df0a98aad5bbcd4d634790305a1d786ad224 ]
Get num-cs u32 from dts of_node property rather than u16.
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Link: https://lore.kernel.org/r/20220216014028.8123-2-jon.lin@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anton Romanov [Wed, 16 Feb 2022 18:26:54 +0000 (18:26 +0000)]
kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode
[ Upstream commit
3a55f729240a686aa8af00af436306c0cd532522 ]
If vcpu has tsc_always_catchup set each request updates pvclock data.
KVM_HC_CLOCK_PAIRING consumers such as ptp_kvm_x86 rely on tsc read on
host's side and do hypercall inside pvclock_read_retry loop leading to
infinite loop in such situation.
v3:
Removed warn
Changed return code to KVM_EFAULT
v2:
Added warn
Signed-off-by: Anton Romanov <romanton@google.com>
Message-Id: <
20220216182653.506850-1-romanton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wanpeng Li [Tue, 15 Feb 2022 10:15:42 +0000 (02:15 -0800)]
KVM: Fix lockdep false negative during host resume
[ Upstream commit
4cb9a998b1ce25fad74a82f5a5c45a4ef40de337 ]
I saw the below splatting after the host suspended and resumed.
WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4
RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
Call Trace:
<TASK>
syscore_resume+0x90/0x340
suspend_devices_and_enter+0xaee/0xe90
pm_suspend.cold+0x36b/0x3c2
state_store+0x82/0xf0
kernfs_fop_write_iter+0x1b6/0x260
new_sync_write+0x258/0x370
vfs_write+0x33f/0x510
ksys_write+0xc9/0x160
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <
1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Tue, 14 Dec 2021 17:49:13 +0000 (19:49 +0200)]
pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID"
[ Upstream commit
6f66db29e2415cbe8759c48584f9cae19b3c2651 ]
It appears that last minute change moved ACPI ID of Alder Lake-M
to the INTC1055, which is already in the driver.
This ID on the other hand will be used elsewhere.
This reverts commit
258435a1c8187f559549e515d2f77fa0b57bcd27.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heikki Krogerus [Mon, 14 Feb 2022 14:19:48 +0000 (17:19 +0300)]
usb: dwc3: pci: add support for the Intel Raptor Lake-S
[ Upstream commit
038438a25c45d5ac996e95a22fa9e76ff3d1f8c7 ]
This patch adds the necessary PCI ID for Intel Raptor Lake-S
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220214141948.18637-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Halil Pasic [Fri, 11 Feb 2022 01:12:52 +0000 (02:12 +0100)]
swiotlb: fix info leak with DMA_FROM_DEVICE
[ Upstream commit
ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e ]
The problem I'm addressing was discovered by the LTP test covering
cve-2018-1000204.
A short description of what happens follows:
1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO
interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV
and a corresponding dxferp. The peculiar thing about this is that TUR
is not reading from the device.
2) In sg_start_req() the invocation of blk_rq_map_user() effectively
bounces the user-space buffer. As if the device was to transfer into
it. Since commit
a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in
sg_build_indirect()") we make sure this first bounce buffer is
allocated with GFP_ZERO.
3) For the rest of the story we keep ignoring that we have a TUR, so the
device won't touch the buffer we prepare as if the we had a
DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device
and the buffer allocated by SG is mapped by the function
virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here
scatter-gather and not scsi generics). This mapping involves bouncing
via the swiotlb (we need swiotlb to do virtio in protected guest like
s390 Secure Execution, or AMD SEV).
4) When the SCSI TUR is done, we first copy back the content of the second
(that is swiotlb) bounce buffer (which most likely contains some
previous IO data), to the first bounce buffer, which contains all
zeros. Then we copy back the content of the first bounce buffer to
the user-space buffer.
5) The test case detects that the buffer, which it zero-initialized,
ain't all zeros and fails.
One can argue that this is an swiotlb problem, because without swiotlb
we leak all zeros, and the swiotlb should be transparent in a sense that
it does not affect the outcome (if all other participants are well
behaved).
Copying the content of the original buffer into the swiotlb buffer is
the only way I can think of to make swiotlb transparent in such
scenarios. So let's do just that if in doubt, but allow the driver
to tell us that the whole mapped buffer is going to be overwritten,
in which case we can preserve the old behavior and avoid the performance
impact of the extra bounce.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kumar Kartikeya Dwivedi [Wed, 9 Feb 2022 07:03:24 +0000 (12:33 +0530)]
selftests/bpf: Add test for bpf_timer overwriting crash
[ Upstream commit
a7e75016a0753c24d6c995bc02501ae35368e333 ]
Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Wed, 9 Mar 2022 21:04:47 +0000 (22:04 +0100)]
net: phy: meson-gxl: improve link-up behavior
[ Upstream commit
2c87c6f9fbddc5b84d67b2fa3f432fcac6d99d93 ]
Sometimes the link comes up but no data flows. This patch fixes
this behavior. It's not clear what's the root cause of the issue.
According to the tests one other link-up issue remains.
In very rare cases the link isn't even reported as up.
Fixes:
84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Tested-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e3473452-a1f9-efcf-5fdd-02b6f44c3fcd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Linton [Thu, 10 Mar 2022 04:55:35 +0000 (22:55 -0600)]
net: bcmgenet: Don't claim WOL when its not available
[ Upstream commit
00b022f8f876a3a036b0df7f971001bef6398605 ]
Some of the bcmgenet platforms don't correctly support WOL, yet
ethtool returns:
"Supports Wake-on: gsf"
which is false.
Ideally if there isn't a wol_irq, or there is something else that
keeps the device from being able to wakeup it should display:
"Supports Wake-on: d"
This patch checks whether the device can wakup, before using the
hard-coded supported flags. This corrects the ethtool reporting, as
well as the WOL configuration because ethtool verifies that the mode
is supported before attempting it.
Fixes:
c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 10 Mar 2022 00:11:45 +0000 (16:11 -0800)]
sctp: fix kernel-infoleak for SCTP sockets
[ Upstream commit
633593a808980f82d251d0ca89730d8bb8b0220c ]
syzbot reported a kernel infoleak [1] of 4 bytes.
After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()
Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:154 [inline]
_copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
copy_to_iter include/linux/uio.h:162 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x795/0xa10 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:737 [inline]
slab_alloc_node mm/slub.c:3247 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1158 [inline]
netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
__netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1061
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at
ffff888114f9b000
Data copied to user address
00007f7fe09ff2e0
CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clément Léger [Wed, 9 Mar 2022 14:22:28 +0000 (15:22 +0100)]
net: phy: DP83822: clear MISR2 register to disable interrupts
[ Upstream commit
37c9d66c95564c85a001d8a035354f0220a1e1c3 ]
MISR1 was cleared twice but the original author intention was probably
to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
clear MISR2.
Fixes:
87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Thu, 10 Mar 2022 01:53:13 +0000 (01:53 +0000)]
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
[ Upstream commit
2ac5b58e645c66932438bb021cb5b52097ce70b0 ]
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes:
7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Featherston [Thu, 10 Mar 2022 01:16:16 +0000 (17:16 -0800)]
gpio: ts4900: Do not set DAT and OE together
[ Upstream commit
03fe003547975680fdb9ff5ab0e41cb68276c4f2 ]
This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.
Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.
Fixes:
9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guillaume Nault [Tue, 8 Mar 2022 22:15:03 +0000 (23:15 +0100)]
selftests: pmtu.sh: Kill nettest processes launched in subshell.
[ Upstream commit
94a4a4fe4c696413932eed8bdec46574de9576b8 ]
When using "run_cmd <command> &", then "$!" refers to the PID of the
subshell used to run <command>, not the command itself. Therefore
nettest_pids actually doesn't contain the list of the nettest commands
running in the background. So cleanup() can't kill them and the nettest
processes run until completion (fortunately they have a 5s timeout).
Fix this by defining a new command for running processes in the
background, for which "$!" really refers to the PID of the command run.
Also, double quote variables on the modified lines, to avoid shellcheck
warnings.
Fixes:
ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guillaume Nault [Tue, 8 Mar 2022 22:15:00 +0000 (23:15 +0100)]
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
[ Upstream commit
18dfc667550fe9c032a6dcc3402b50e691e18029 ]
The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:
$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.
Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.
Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.
Fixes:
a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Tue, 8 Mar 2022 18:50:07 +0000 (21:50 +0300)]
NFC: port100: fix use-after-free in port100_send_complete
[ Upstream commit
f80cfe2f26581f188429c12bd937eb905ad3ac7b ]
Syzbot reported UAF in port100_send_complete(). The root case is in
missing usb_kill_urb() calls on error handling path of ->probe function.
port100_send_complete() accesses devm allocated memory which will be
freed on probe failure. We should kill this urbs before returning an
error from probe function to prevent reported use-after-free
Fail log:
BUG: KASAN: use-after-free in port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
Read of size 1 at addr
ffff88801bb59540 by task ksoftirqd/2/26
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
port100_send_complete+0x16e/0x1a0 drivers/nfc/port100.c:935
__usb_hcd_giveback_urb+0x2b0/0x5c0 drivers/usb/core/hcd.c:1670
...
Allocated by task 1255:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track mm/kasan/common.c:45 [inline]
set_alloc_info mm/kasan/common.c:436 [inline]
____kasan_kmalloc mm/kasan/common.c:515 [inline]
____kasan_kmalloc mm/kasan/common.c:474 [inline]
__kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524
alloc_dr drivers/base/devres.c:116 [inline]
devm_kmalloc+0x96/0x1d0 drivers/base/devres.c:823
devm_kzalloc include/linux/device.h:209 [inline]
port100_probe+0x8a/0x1320 drivers/nfc/port100.c:1502
Freed by task 1255:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
kasan_set_track+0x21/0x30 mm/kasan/common.c:45
kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370
____kasan_slab_free mm/kasan/common.c:366 [inline]
____kasan_slab_free+0xff/0x140 mm/kasan/common.c:328
kasan_slab_free include/linux/kasan.h:236 [inline]
__cache_free mm/slab.c:3437 [inline]
kfree+0xf8/0x2b0 mm/slab.c:3794
release_nodes+0x112/0x1a0 drivers/base/devres.c:501
devres_release_all+0x114/0x190 drivers/base/devres.c:530
really_probe+0x626/0xcc0 drivers/base/dd.c:670
Reported-and-tested-by: syzbot+16bcb127fb73baeecb14@syzkaller.appspotmail.com
Fixes:
0347a6ab300a ("NFC: port100: Commands mechanism implementation")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220308185007.6987-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roi Dayan [Wed, 16 Feb 2022 11:56:57 +0000 (13:56 +0200)]
net/mlx5e: Lag, Only handle events from highest priority multipath entry
[ Upstream commit
ad11c4f1d8fd1f03639460e425a36f7fd0ea83f5 ]
There could be multiple multipath entries but changing the port affinity
for each one doesn't make much sense and there should be a default one.
So only track the entry with lowest priority value.
The commit doesn't affect existing users with a single entry.
Fixes:
544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Moshe Shemesh [Fri, 4 Feb 2022 09:47:44 +0000 (11:47 +0200)]
net/mlx5: Fix a race on command flush flow
[ Upstream commit
063bd355595428750803d8736a9bb7c8db67d42d ]
Fix a refcount use after free warning due to a race on command entry.
Such race occurs when one of the commands releases its last refcount and
frees its index and entry while another process running command flush
flow takes refcount to this command entry. The process which handles
commands flush may see this command as needed to be flushed if the other
process released its refcount but didn't release the index yet. Fix it
by adding the needed spin lock.
It fixes the following warning trace:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0
...
RIP: 0010:refcount_warn_saturate+0x80/0xe0
...
Call Trace:
<TASK>
mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core]
mlx5_cmd_flush+0x3a/0xf0 [mlx5_core]
enter_error_state+0x44/0x80 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core]
process_one_work+0x1be/0x390
worker_thread+0x4d/0x3d0
? rescuer_thread+0x350/0x350
kthread+0x141/0x160
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
Fixes:
50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mohammad Kabat [Thu, 25 Mar 2021 12:38:55 +0000 (14:38 +0200)]
net/mlx5: Fix size field in bufferx_reg struct
[ Upstream commit
ac77998b7ac3044f0509b097da9637184598980d ]
According to HW spec the field "size" should be 16 bits
in bufferx register.
Fixes:
e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup")
Signed-off-by: Mohammad Kabat <mohammadkab@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Duoming Zhou [Tue, 8 Mar 2022 08:12:23 +0000 (16:12 +0800)]
ax25: Fix NULL pointer dereference in ax25_kill_by_device
[ Upstream commit
71171ac8eb34ce7fe6b3267dce27c313ab3cb3ac ]
When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:
===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...
This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.
Fixes:
4e0f718daf97 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 07:42:47 +0000 (07:42 +0000)]
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
[ Upstream commit
c9ffa3e2bc451816ce0295e40063514fabf2bd36 ]
This node pointer is returned by of_find_compatible_node() with
refcount incremented. Calling of_node_put() to aovid the refcount leak.
Fixes:
501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Tue, 8 Mar 2022 06:57:39 +0000 (14:57 +0800)]
net: ethernet: lpc_eth: Handle error for clk_enable
[ Upstream commit
2169b79258c8be803d2595d6456b1e77129fe154 ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes:
b7370112f519 ("lpc32xx: Added ethernet driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Tue, 8 Mar 2022 06:40:07 +0000 (14:40 +0800)]
net: ethernet: ti: cpts: Handle error for clk_enable
[ Upstream commit
6babfc6e6fab068018c36e8f6605184b8c0b349d ]
As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.
Fixes:
8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tung Nguyen [Tue, 8 Mar 2022 02:11:59 +0000 (02:11 +0000)]
tipc: fix incorrect order of state message data sanity check
[ Upstream commit
c79fcc27be90b308b3fa90811aefafdd4078668c ]
When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity check is done after the message header is accessed to
update some link variables.
This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.
Fixes:
9aa422ad3266 ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Tue, 8 Mar 2022 02:47:49 +0000 (02:47 +0000)]
ethernet: Fix error handling in xemaclite_of_probe
[ Upstream commit
b19ab4b38b06aae12442b2de95ccf58b5dc53584 ]
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid the
refcount leak. As the remove function do.
Fixes:
5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220308024751.2320-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jedrzej Jagielski [Tue, 22 Feb 2022 11:43:04 +0000 (11:43 +0000)]
ice: Fix curr_link_speed advertised speed
[ Upstream commit
ad35ffa252af67d4cc7c744b9377a2b577748e3f ]
Change curr_link_speed advertised speed, due to
link_info.link_speed is not equal phy.curr_user_speed_req.
Without this patch it is impossible to set advertised
speed to same as link_speed.
Testing Hints: Try to set advertised speed
to 25G only with 25G default link (use ethtool -s 0x80000000)
Fixes:
48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 16 Jan 2022 18:46:20 +0000 (19:46 +0100)]
ice: Don't use GFP_KERNEL in atomic context
[ Upstream commit
3d97f1afd8d831e0c0dc1157418f94b8faa97b54 ]
ice_misc_intr() is an irq handler. It should not sleep.
Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory.
Fixes:
348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Leszek Kaliszczuk <leszek.kaliszczuk@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Ertman [Fri, 18 Feb 2022 20:39:25 +0000 (12:39 -0800)]
ice: Fix error with handling of bonding MTU
[ Upstream commit
97b0129146b1544bbb0773585327896da3bb4e0a ]
When a bonded interface is destroyed, .ndo_change_mtu can be called
during the tear-down process while the RTNL lock is held. This is a
problem since the auxiliary driver linked to the LAN driver needs to be
notified of the MTU change, and this requires grabbing a device_lock on
the auxiliary_device's dev. Currently this is being attempted in the
same execution context as the call to .ndo_change_mtu which is causing a
dead-lock.
Move the notification of the changed MTU to a separate execution context
(watchdog service task) and eliminate the "before" notification.
Fixes:
348048e724a0e ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Keller [Thu, 17 Feb 2022 00:51:36 +0000 (16:51 -0800)]
ice: stop disabling VFs due to PF error responses
[ Upstream commit
79498d5af8e458102242d1667cf44df1f1564e63 ]
The ice_vc_send_msg_to_vf function has logic to detect "failure"
responses being sent to a VF. If a VF is sent more than
ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled.
Almost identical logic also existed in the i40e driver.
This logic was added to the ice driver in commit
1071a8358a28 ("ice:
Implement virtchnl commands for AVF support") which itself copied from
the i40e implementation in commit
5c3c48ac6bf5 ("i40e: implement virtual
device interface").
Neither commit provides a proper explanation or justification of the
check. In fact, later commits to i40e changed the logic to allow
bypassing the check in some specific instances.
The "logic" for this seems to be that error responses somehow indicate a
malicious VF. This is not really true. The PF might be sending an error
for any number of reasons such as lack of resources, etc.
Additionally, this causes the PF to log an info message for every failed
VF response which may confuse users, and can spam the kernel log.
This behavior is not documented as part of any requirement for our
products and other operating system drivers such as the FreeBSD
implementation of our drivers do not include this type of check.
In fact, the change from dev_err to dev_info in i40e commit
18b7af57d9c1
("i40e: Lower some message levels") explains that these messages
typically don't actually indicate a real issue. It is quite likely that
a user who hits this in practice will be very confused as the VF will be
disabled without an obvious way to recover.
We already have robust malicious driver detection logic using actual
hardware detection mechanisms that detect and prevent invalid device
usage. Remove the logic since its not a documented requirement and the
behavior is not intuitive.
Fixes:
1071a8358a28 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jacob Keller [Thu, 17 Feb 2022 00:51:35 +0000 (16:51 -0800)]
i40e: stop disabling VFs due to PF error responses
[ Upstream commit
5710ab79166504013f7c0ae6a57e7d2fd26e5c43 ]
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf)
function has logic to detect "failure" responses sent to the VF. If a VF
is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is
marked as disabled. In either case, a dev_info message is printed
stating that a VF opcode failed.
This logic originates from the early implementation of VF support in
commit
5c3c48ac6bf5 ("i40e: implement virtual device interface").
That commit did not go far enough. The "logic" for this behavior seems
to be that error responses somehow indicate a malicious VF. This is not
really true. The PF might be sending an error for any number of reasons
such as lacking resources, an unsupported operation, etc. This does not
indicate a malicious VF. We already have a separate robust malicious VF
detection which relies on hardware logic to detect and prevent a variety
of behaviors.
There is no justification for this behavior in the original
implementation. In fact, a later commit
18b7af57d9c1 ("i40e: Lower some
message levels") reduced the opcode failure message from a dev_err to a
dev_info. In addition, recent commit
01cbf50877e6 ("i40e: Fix to not
show opcode msg on unsuccessful VF MAC change") changed the logic to
allow quieting it for expected failures.
That commit prevented this logic from kicking in for specific
circumstances. This change did not go far enough. The behavior is not
documented nor is it part of any requirement for our products. Other
operating systems such as the FreeBSD implementation of our driver do
not include this logic.
It is clear this check does not make sense, and causes problems which
led to ugly workarounds.
Fix this by just removing the entire logic and the need for the
i40e_vc_send_msg_to_vf_ex function.
Fixes:
01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change")
Fixes:
5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Maloszewski [Mon, 24 Jan 2022 13:35:43 +0000 (13:35 +0000)]
iavf: Fix handling of vlan strip virtual channel messages
[ Upstream commit
2cf29e55894886965722e6625f6a03630b4db31d ]
Modify netdev->features for vlan stripping based on virtual
channel messages received from the PF. Change is needed
to synchronize vlan strip status between PF sysfs and iavf ethtool.
Fixes:
5951a2b9812d ("iavf: Fix VLAN feature flags after VFR")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joel Stanley [Tue, 8 Mar 2022 00:06:31 +0000 (10:36 +1030)]
ARM: dts: aspeed: Fix AST2600 quad spi group
[ Upstream commit
2f6edb6bcb2f3f41d876e0eba2ba97f87a0296ea ]
Requesting quad mode for the FMC resulted in an error:
&fmc {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fwqspi_default>'
[ 0.742963] aspeed-g6-pinctrl
1e6e2000.syscon:pinctrl: invalid function FWQSPID in map table

This is because the quad mode pins are a group of pins, not a function.
After applying this patch we can request the pins and the QSPI data
lines are muxed:
# cat /sys/kernel/debug/pinctrl/
1e6e2000.syscon\:pinctrl-aspeed-g6-pinctrl/pinmux-pins |grep
1e620000.spi
pin 196 (AE12): device
1e620000.spi function FWSPID group FWQSPID
pin 197 (AF12): device
1e620000.spi function FWSPID group FWQSPID
pin 240 (Y1): device
1e620000.spi function FWSPID group FWQSPID
pin 241 (Y2): device
1e620000.spi function FWSPID group FWQSPID
pin 242 (Y3): device
1e620000.spi function FWSPID group FWQSPID
pin 243 (Y4): device
1e620000.spi function FWSPID group FWQSPID
Fixes:
f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au
Link: https://lore.kernel.org/r/20220304011010.974863-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King (Oracle) [Mon, 7 Mar 2022 12:13:30 +0000 (12:13 +0000)]
net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate()
[ Upstream commit
e5417cbf7ab5df1632e68fe7d9e6331fc0e7dbd6 ]
Discussing one of the tests in mt753x_phylink_validate() with Landen
Chao confirms that the "||" should be "&&". Fix this.
Fixes:
c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1nRCF0-00CiXD-7q@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jernej Skrabec [Mon, 28 Feb 2022 18:14:36 +0000 (19:14 +0100)]
drm/sun4i: mixer: Fix P010 and P210 format numbers
[ Upstream commit
9470c29faa91c804aa04de4c10634bf02462bfa5 ]
It turns out that DE3 manual has inverted YUV and YVU format numbers for
P010 and P210. Invert them.
This was tested by playing video decoded to P010 and additionally
confirmed by looking at BSP driver source.
Fixes:
169ca4b38932 ("drm/sun4i: Add separate DE3 VI layer formats")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228181436.1424550-1-jernej.skrabec@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Mon, 7 Mar 2022 11:56:23 +0000 (13:56 +0200)]
gpiolib: acpi: Convert ACPI value of debounce to microseconds
[ Upstream commit
660c619b9d7ccd28648ee3766cdbe94ec7b27402 ]
It appears that GPIO ACPI library uses ACPI debounce values directly.
However, the GPIO library APIs expect the debounce timeout to be in
microseconds.
Convert ACPI value of debounce to microseconds.
While at it, document this detail where it is appropriate.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Fixes:
8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Sat, 5 Mar 2022 20:47:20 +0000 (17:47 -0300)]
smsc95xx: Ignore -ENODEV errors when device is unplugged
[ Upstream commit
c70c453abcbf3ecbaadd4c3236a5119b8da365cf ]
According to Documentation/driver-api/usb/URB.rst when a device
is unplugged usb_submit_urb() returns -ENODEV.
This error code propagates all the way up to usbnet_read_cmd() and
usbnet_write_cmd() calls inside the smsc95xx.c driver during
Ethernet cable unplug, unbind or reboot.
This causes the following errors to be shown on reboot, for example:
ci_hdrc ci_hdrc.1: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-1: USB disconnect, device number 2
usb 2-1.1: USB disconnect, device number 3
smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup
usb 2-1.4: USB disconnect, device number 4
ci_hdrc ci_hdrc.1: USB bus 2 deregistered
ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
imx2-wdt
30280000.watchdog: Device shutdown: Expect reboot!
reboot: Restarting system
Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and
__smsc95xx_phy_wait_not_busy() and do not print error messages
when -ENODEV is returned.
Fixes:
a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Sat, 5 Mar 2022 15:06:42 +0000 (07:06 -0800)]
qed: return status of qed_iov_get_link
[ Upstream commit
d9dc0c84ad2d4cc911ba252c973d1bf18d5eb9cf ]
Clang static analysis reports this issue
qed_sriov.c:4727:19: warning: Assigned value is
garbage or undefined
ivi->max_tx_rate = tx_rate ? tx_rate : link.speed;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
link is only sometimes set by the call to qed_iov_get_link()
qed_iov_get_link fails without setting link or returning
status. So change the decl to return status.
Fixes:
73390ac9d82b ("qed*: support ndo_get_vf_config")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steffen Klassert [Mon, 7 Mar 2022 12:11:40 +0000 (13:11 +0100)]
esp: Fix BEET mode inter address family tunneling on GSO
[ Upstream commit
053c8fdf2c930efdff5496960842bbb5c34ad43a ]
The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.
Fixes:
384a46ea7bdc7 ("esp4: add gso_segment for esp4 beet mode")
Fixes:
7f9e40eb18a99 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steffen Klassert [Mon, 7 Mar 2022 12:11:39 +0000 (13:11 +0100)]
esp: Fix possible buffer overflow in ESP transformation
[ Upstream commit
ebe48d368e97d007bfeb76fcb065d6cfc4c96645 ]
The maximum message size that can be send is bigger than
the maximum site that skb_page_frag_refill can allocate.
So it is possible to write beyond the allocated buffer.
Fix this by doing a fallback to COW in that case.
v2:
Avoid get get_order() costs as suggested by Linus Torvalds.
Fixes:
cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes:
03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Reported-by: valis <sec@valis.email>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Sat, 5 Mar 2022 09:14:11 +0000 (01:14 -0800)]
net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare()
[ Upstream commit
e0058f0fa80f6e09c4d363779c241c45a3c56b94 ]
The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so
its return value should be checked.
Fixes:
1408cc1fa48c ("qed: Introduce VFs")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Sat, 5 Mar 2022 08:58:16 +0000 (00:58 -0800)]
isdn: hfcpci: check the return value of dma_set_mask() in setup_hw()
[ Upstream commit
d0aeb0d4a3f7d2a0df7e9545892bbeede8f2ac7e ]
The function dma_set_mask() in setup_hw() can fail, so its return value
should be checked.
Fixes:
1700fe1a10dc ("Add mISDN HFC PCI driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Min [Tue, 1 Mar 2022 09:10:59 +0000 (17:10 +0800)]
vdpa: fix use-after-free on vp_vdpa_remove
[ Upstream commit
eb057b44dbe35ae14527830236a92f51de8f9184 ]
When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device
and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove,
triggering use-after-free.
Call Trace of unbinding driver free vp_vdpa :
do_syscall_64
vfs_write
kernfs_fop_write_iter
device_release_driver_internal
pci_device_remove
vp_vdpa_remove
vdpa_unregister_device
kobject_release
device_release
kfree
Call Trace of dereference vp_vdpa->mdev.pci_dev:
vp_modern_remove
pci_release_selected_regions
pci_release_region
pci_resource_len
pci_resource_end
(dev)->resource[(bar)].end
Signed-off-by: Zhang Min <zhang.min9@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/20220301091059.46869-1-wang.yi59@zte.com.cn
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes:
64b9f64f80a6 ("vdpa: introduce virtio pci driver")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xie Yongji [Fri, 4 Mar 2022 10:00:57 +0000 (18:00 +0800)]
virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero
[ Upstream commit
dacc73ed0b88f1a787ec20385f42ca9dd9eddcd0 ]
Currently the value of max_discard_segment will be set to
MAX_DISCARD_SEGMENTS (256) with no basis in hardware if device
set 0 to max_discard_seg in configuration space. It's incorrect
since the device might not be able to handle such large descriptors.
To fix it, let's follow max_segments restrictions in this case.
Fixes:
1f23816b8eb8 ("virtio_blk: add discard and write zeroes support")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220304100058.116-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anirudh Rayabharam [Sat, 5 Mar 2022 09:55:25 +0000 (15:25 +0530)]
vhost: fix hung thread due to erroneous iotlb entries
[ Upstream commit
e2ae38cf3d91837a493cb2093c87700ff3cbe667 ]
In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when
start is 0 and last is ULONG_MAX. One instance where it can happen
is when userspace sends an IOTLB message with iova=size=uaddr=0
(vhost_process_iotlb_msg). So, an entry with size = 0, start = 0,
last = ULONG_MAX ends up in the iotlb. Next time a packet is sent,
iotlb_access_ok() loops indefinitely due to that erroneous entry.
Call Trace:
<TASK>
iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340
vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366
vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104
vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
Reported by syzbot at:
https://syzkaller.appspot.com/bug?extid=
0abd373e2e50d704db87
To fix this, do two things:
1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map
a range with size 0.
2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX]
by splitting it into two entries.
Fixes:
0bbe30668d89e ("vhost: factor out IOTLB")
Reported-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com
Tested-by: syzbot+0abd373e2e50d704db87@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20220305095525.5145-1-mail@anirudhrb.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey Khoroshilov [Fri, 4 Mar 2022 18:25:36 +0000 (21:25 +0300)]
mISDN: Fix memory leak in dsp_pipeline_build()
[ Upstream commit
c6a502c2299941c8326d029cfc8a3bc8a4607ad5 ]
dsp_pipeline_build() allocates dup pointer by kstrdup(cfg),
but then it updates dup variable by strsep(&dup, "|").
As a result when it calls kfree(dup), the dup variable contains NULL.
Found by Linux Driver Verification project (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes:
960366cf8dbb ("Add mISDN DSP")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Thu, 3 Mar 2022 07:54:15 +0000 (08:54 +0100)]
net: phy: meson-gxl: fix interrupt handling in forced mode
[ Upstream commit
a502a8f04097e038c3daa16c5202a9538116d563 ]
This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.
This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).
This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.
Fixes:
84c8f773d2dc ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xie Yongji [Fri, 21 Jan 2022 08:39:39 +0000 (16:39 +0800)]
vduse: Fix returning wrong type in vduse_domain_alloc_iova()
[ Upstream commit
b9d102dafec6af1c07b610faf0a6d4e8aee14ae0 ]
This fixes the following smatch warnings:
drivers/vdpa/vdpa_user/iova_domain.c:305 vduse_domain_alloc_iova() warn: should 'iova_pfn << shift' be a 64 bit type?
Fixes:
8c773d53fb7b ("vduse: Implement an MMU-based software IOTLB")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20220121083940.102-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Si-Wei Liu [Sat, 15 Jan 2022 00:28:01 +0000 (19:28 -0500)]
vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
[ Upstream commit
ed0f849fc3a63ed2ddf5e72cdb1de3bdbbb0f8eb ]
When control vq receives a VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
request from the driver, presently there is no validation against the
number of queue pairs to configure, or even if multiqueue had been
negotiated or not is unverified. This may lead to kernel panic due to
uninitialized resource for the queues were there any bogus request
sent down by untrusted driver. Tie up the loose ends there.
Fixes:
52893733f2c5 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Link: https://lore.kernel.org/r/1642206481-30721-4-git-send-email-si-wei.liu@oracle.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tung Nguyen [Fri, 4 Mar 2022 03:25:18 +0000 (03:25 +0000)]
tipc: fix kernel panic when enabling bearer
[ Upstream commit
be4977b847f5d5cedb64d50eaaf2218c3a55a3a3 ]
When enabling a bearer on a node, a kernel panic is observed:
[ 4.498085] RIP: 0010:tipc_mon_prep+0x4e/0x130 [tipc]
...
[ 4.520030] Call Trace:
[ 4.520689] <IRQ>
[ 4.521236] tipc_link_build_proto_msg+0x375/0x750 [tipc]
[ 4.522654] tipc_link_build_state_msg+0x48/0xc0 [tipc]
[ 4.524034] __tipc_node_link_up+0xd7/0x290 [tipc]
[ 4.525292] tipc_rcv+0x5da/0x730 [tipc]
[ 4.526346] ? __netif_receive_skb_core+0xb7/0xfc0
[ 4.527601] tipc_l2_rcv_msg+0x5e/0x90 [tipc]
[ 4.528737] __netif_receive_skb_list_core+0x20b/0x260
[ 4.530068] netif_receive_skb_list_internal+0x1bf/0x2e0
[ 4.531450] ? dev_gro_receive+0x4c2/0x680
[ 4.532512] napi_complete_done+0x6f/0x180
[ 4.533570] virtnet_poll+0x29c/0x42e [virtio_net]
...
The node in question is receiving activate messages in another
thread after changing bearer status to allow message sending/
receiving in current thread:
thread 1 | thread 2
-------- | --------
|
tipc_enable_bearer() |
test_and_set_bit_lock() |
tipc_bearer_xmit_skb() |
| tipc_l2_rcv_msg()
| tipc_rcv()
| __tipc_node_link_up()
| tipc_link_build_state_msg()
| tipc_link_build_proto_msg()
| tipc_mon_prep()
| {
| ...
| // null-pointer dereference
| u16 gen = mon->dom_gen;
| ...
| }
// Not being executed yet |
tipc_mon_create() |
{ |
... |
// allocate |
mon = kzalloc(); |
... |
} |
Monitoring pointer in thread 2 is dereferenced before monitoring data
is allocated in thread 1. This causes kernel panic.
This commit fixes it by allocating the monitoring data before enabling
the bearer to receive messages.
Fixes:
35c55c9877f8 ("tipc: add neighbor monitoring framework")
Reported-by: Shuang Li <shuali@redhat.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pali Rohár [Mon, 17 Jan 2022 18:20:06 +0000 (19:20 +0100)]
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
[ Upstream commit
a0e897d1b36793fe0ab899f2fe93dff25c82f418 ]
U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define
also alias for ethernet0.
Fixes:
7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Torokhov [Sat, 26 Feb 2022 01:18:58 +0000 (17:18 -0800)]
HID: vivaldi: fix sysfs attributes leak
[ Upstream commit
cc71d37fd1f11e0495b1cf580909ebea37eaa886 ]
The driver creates the top row map sysfs attribute in input_configured()
method; unfortunately we do not have a callback that is executed when HID
interface is unbound, thus we are leaking these sysfs attributes, for
example when device is disconnected.
To fix it let's switch to managed version of adding sysfs attributes which
will ensure that they are destroyed when the driver is unbound.
Fixes:
14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taniya Das [Wed, 23 Feb 2022 18:56:06 +0000 (00:26 +0530)]
clk: qcom: dispcc: Update the transition delay for MDSS GDSC
[ Upstream commit
6e6fec3f961c00ca34ffb4bf2ad9febb4b499f8d ]
On SC7180 we observe black screens because the gdsc is being
enabled/disabled very rapidly and the GDSC FSM state does not work as
expected. This is due to the fact that the GDSC reset value is being
updated from SW.
The recommended transition delay for mdss core gdsc updated for
SC7180/SC7280/SM8250.
Fixes:
dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180")
Fixes:
1a00c962f9cd ("clk: qcom: Add display clock controller driver for SC7280")
Fixes:
80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/20220223185606.3941-2-tdas@codeaurora.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[sboyd@kernel.org: lowercase hex]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>