daily update

*** empty log message ***

From Craig Silverstein: add cast to avoid warning.

From Craig Silverstein: handle PLT32 relocs against local symbols for
x86_64.

Handle PLT32 against local symbols.

daily update

*** empty log message ***

Add wide string constant test.

Fix handling of wide string merge sections.

2007-10-19  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (prefix_table): Use XS on psrldq and pslldq.

Add MN10300 linker relaxation support for symbol differences

* gdbarch.sh: Remove "macro" column of input table.  Remove handling
of "macro" column throughout the file.  Remove (empty) "macro" entry
of all gdbarch functions.

* gdbarch.sh (sofun_address_maybe_missing): New gdbarch variable.
* gdbarch.c, gdbarch.h: Regenerate.
* dbxread.c (find_stab_function_addr): Define unconditionally.
(read_dbx_symtab): Use gdbarch_sofun_address_maybe_missing
instead of SOFUN_ADDRESS_MAYBE_MISSING.
(end_psymtab): Likewise.
(process_one_symbol): Likewise.
* mdebugread.c (parse_partial_symbols): Likewise.

* symtab.h (struct minimal_symbol): Always define "filename" member.
* elfread.c (elf_symtab_read): Use msym->filename unconditionally.
* minsyms.c (lookup_minimal_symbol): Likewise.
* symmisc.c (dump_msymbols): Likewise.

* config/i386/i386sol2.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/tm-i386sol2.h: Remove file.
* config/i386/tm-linux.h: Remove file.
* i386-linux-tdep.c (i386_linux_init_abi): Add call to
set_gdbarch_sofun_address_maybe_missing.
* i386-sol2-tdep.c (i386_sol2_init_abi): Likewise.

* config/powerpc/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/nbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/ppc-eabi.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/ppc-sim.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/tm-ppc-eabi.h: Remove file.
* rs6000-tdep.c (rs6000_gdbarch_init): Add call to
set_gdbarch_sofun_address_maybe_missing.

* config/sparc/sol2-64.mt (DEPRECATED_TM_FILE): Remove.
* config/sparc/sol2.mt (DEPRECATED_TM_FILE): Remove.
* config/sparc/tm-sol2.h: Remove file.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Add call to
set_gdbarch_sofun_address_maybe_missing.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Likewise.

doc/ChangeLog:

* gdbarch.texi (Target Conditionals): Remove documentation of
SOFUN_ADDRESS_MAYBE_MISSING, replaced by ...
(Compiler Characteristics): ... documentation of
set_gdbarch_sofun_address_maybe_missing.

* gdbarch.sh (static_transform_name): New gdbarch callback.
* gdbarch.c, gdbarch.h: Regenerate.
* dbxread.c (read_dbx_symtab): Use gdbarch_static_transform_name
instead of STATIC_TRANSFORM_NAME.
* mdebugread.c (parse_partial_symbols): Likewise.
* stabsread.c (define_symbol): Likewise.
* xcoffread.c (scan_xcoff_symtab): Likewise.

* config/i368/tm-i386sol2.h (STATIC_TRANSFORM_NAME): Remove.
(IS_STATIC_TRANSFORM_NAME): Remove.
* i386-tdep.c (sunpro_static_transform_name): Remove, move to ...
* i386-sol2-tdep.c (i386_sol2_static_transform_name): ... here.
(i386_sol2_init_abi): Install it.

* config/sparc/tm-sol2.h (STATIC_TRANSFORM_NAME): Remove.
(IS_STATIC_TRANSFORM_NAME): Remove.
* sparc-tdep.c (sparc_stabs_unglobalize_name): Remove, move to ...
* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): ... here.
(sparc32_sol2_init_abi): Install it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Likewise.
* sparc-tdep.h (sparc_sol2_static_transform_name): Add prototype.

* elf-m10300.c: Convert to ISO C.
* tc-mn10300.c: Convert to ISO C.

* config/tc-ppc.c (ppc_parse_name): Skip leading '%'.
(md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of
chars that can start a name.

*** empty log message ***

daily update

Add support for -Bsymbolic.

Rework section mapping algorithm to handle .data.rel.ro sections.

Correctly handle alignment in merge sections.

* mips-tdep.c (mips_xfer_register): Take a gdbarch argument.
(mips_n32n64_return_value, mips_o32_return_value)
(mips_o64_return_value): Update calls to mips_xfer_register.

gas/

2007-10-18  Carlos O'Donell  <carlos@systemhalted.org>

* config/tc-hppa.c (pa_ip): Fix comment typo.
(pa_comm): Likewise.

PR gas/5172
* config/tc-arc.c (md_estimate_size_before_relax): Change error message.
  (md_convert_frag): Just call abort.
* config/tc-i860.c (md_estimate_size_before_relax): Change error message.
* config/tc-i860.h (md_convert_frag): Just call abort.
* config/tc-ip2k.c (md_estimate_size_before_relax): Change error message.
  (md_convert_frag): Just call abort.
* config/tc-m68k.c (m68k_ip): Do not attempt translation of architecture names.

PR gas/5174
* config/tc-arm.c: Fix formatting and spelling errors.
* gas.pot: Regenerate.

PR gas/5175
* config/tc-xc16x.c: Fix formatting and internationalization.
* gas.pot: Regenerate.

2007-10-18  Michael Snyder  <msnyder@specifix.com>

* gdb.base/dbx.exp: Add missing "-re " operator.

.

2007-10-18  Roland McGrath  <roland@redhat.com>

* common.h (NT_PPC_VMX): New macro.

PR ld/4424
* config.bfd (targ_selvecs): Add bfd_elf64_alpha_vec for
alpha/FreeBSD.  Add bfd_elf64_sparc_vec for sparc64/FreeBSD.
Add bfd_elf32_i386_vec and bfd_efi_app_ia32_vec for i386/FreeBSD.
(targ64_selvecs): Set for i386/FreeBSD.
* elf-bfd.h (elf_backend_data): Add relocs_compatible.
(_bfd_elf_default_relocs_compatible): Declare.
(_bfd_elf_relocs_compatible): Declare.
* elfxx-target.h (elf_backend_relocs_compatible): Define.
(elfNN_bed): Init new relocs_compatible field.
* elflink.c (_bfd_elf_default_relocs_compatible): New function.
(_bfd_elf_relocs_compatible): New function.
(elf_link_add_object_symbols): Call bed->relocs_compatible.
* elf32-i386.c (elf_backend_relocs_compatible): Define.
* elf64-alpha.c: Likewise.
* elf64-sparc.c: Likewise.
* elf64-x86-64.c: Likewise.

*** empty log message ***

daily update

2007-10-17  Zack Weinberg  <zack@codesourcery.com>

* ldlang.c (lang_check_section_addresses): Also report size of
overflow for any overflowed memory regions.
(os_region_check): Diagnose an overflowed region only once per
region.  Do not reset region->current on overflow.

2007-10-17  Zack Weinberg  <zack@codesourcery.com>
    Daniel Jacobowitz  <dan@codesourcery.com>
    Mark Shinwell  <shinwell@codesourcery.com>
    Joseph Myers  <joseph@codesourcery.com>

* ld-scripts/rgn-over.exp: New driver.
* ld-scripts/rgn-over.s: New file.
* ld-scripts/rgn-over1.d, ld-scripts/rgn-over1.t,
ld-scripts/rgn-over2.d, ld-scripts/rgn-over2.t,
ld-scripts/rgn-over3.d, ld-scripts/rgn-over3.t,
ld-scripts/rgn-over4.d, ld-scripts/rgn-over4.t,
ld-scripts/rgn-over5.d, ld-scripts/rgn-over5.t,
ld-scripts/rgn-over6.d, ld-scripts/rgn-over6.t,
ld-scripts/rgn-over7.d, ld-scripts/rgn-over7.t:
New test cases.

Remove duplicate definitions of the md_atof() function

opcodes/
* m68k-opc.c (m68k_opcodes): Correct move sr and ccr masks for
coldfire.

gas/testsuite/
* gas/m68k/mcf-movsr.s: New.
* gas/m68k/mcf-movsr.d: New.
* gas/m68k/all.exp: Add mcf-movsr test.

* frame.c (frame_unwind_unsigned_register): Delete.
(frame_sp_unwind): Use frame_unwind_register_unsigned instead.
* frame.h (frame_unwind_unsigned_register): Delete prototype.

* alpha-linux-tdep.c, alpha-mdebug-tdep.c, alpha-tdep.c,
avr-tdep.c, cris-tdep.c, frv-tdep.c, m68hc11-tdep.c, mn10300-tdep.c,
mt-tdep.c: Replace frame_unwind_unsigned_register with
frame_unwind_register_unsigned.

* gdbint.texinfo (Target Conditionals): Use
frame_unwind_register_unsigned in examples instead of
frame_unwind_unsigned_register.

Add infrastructure for threading support.

* elf32-xtensa.c (relax_section): Check for a reference to a discarded
DWARF section and anticipate its replacement with the kept section.

daily update

*** empty log message ***

* elf32-xtensa.c (elf_xtensa_discard_info_for_section): Remove
unnecessary size variables.  Set sec->rawsize.
(relax_section, relax_property_section): Likewise.

* section.c (struct bfd_section): Clarify comment for rawsize field.
* bfd-in2.h: Regenerate.

From Cary Coutant: preliminary shared library support.

From Craig Silverstein: check that we get environ right.

From Craig Silverstein: implement -Ttext.

* doc/binutils.texi (objcopy, strip): Replace hyphens with em-dashes.
(objdump, strip, c++filt): Correct punctuation for "e.g." and "i.e."
and change to spell out "for example" in two places.

* config/i386/mingw.mh, config/i386/mingw.mt: New files.
* configure.tgt (i[34567]86-*-mingw32*): Set gdb_target = mingw.
* win32-nat.c: Only include cygwin.h on Cygwin host.  Don't
include procfs.h.
(cygwin_load_start, cygwin_load_end, cygwin_exceptions): Disable
if not building on Cygwin.
(win32_make_so, handle_output_debug_string, handle_exception)
(do_initial_win32_stuff): Wrap Cygwin specific code in __CYGWIN__.
(win32_attach): Only fallback to Cygwin pids if building on
Cygwin.
(win32_pid_to_exec_file): Disable Cygwin specific code, if not
building on Cygwin.
(win32_create_inferior): Disable starting the inferior through a
shell, environment var processing and tty handling if not building
on Cygwin.
(cygwin_pid_to_str): Rename to ...
(win32_pid_to_str): ... this.
(init_win32_ops): Update use of win32_pid_to_str.  Disable "shell"
and "cygwin-exceptions" commands if not building on Cygwin.

* doc/as.texinfo (Overview): Add Xtensa --rename-section option.

* doc/gdb.texinfo:  Add TSIZE definition, removed
statement about unbounded arrays being unimplemented.
* m2-valprint.c (m2_print_array_contents):  New function.
(m2_print_unbounded_array):  New function.
(m2_print_array_contents):  New function.
* m2-typeprint.c (m2_unbounded_array):  New function.
(m2_is_unbounded_array):  New function.
(m2_print_type):  Test for unbounded array when walking
across structs.
* m2-lang.h:  Added extern m2_is_unbounded_array.
* m2-lang.c (evaluate_subexp_modula2):  New function.
(exp_descriptor_modula2):  New structure.
(m2_language_defn):  Use exp_descriptor_modula2.
* m2-exp.y:  Added TSIZE and binary subscript.

* configure.ac: Added gdb.modula2/Makefile to AC_OUTPUT.
* configure.ac: Removed trailing spaces after backslash.
* gdb.modula2: New directory.
* gdb.modula2/Makefile.in: New file.
* gdb.modula2/unbounded-array.exp: New file.
* gdb.modula2/unbounded1.c: New file.

* configure.in: Build windows tools for --enable-targets=all.
* configure: Regenerate.

* elflink.c (_bfd_elf_check_kept_section): Use the section rawsize
values if they are set.

PR 5146
* configure.in (AC_CHECK_HEADERS): Add alloca.h
* configure: Regenerate.
* config.in: Regenerate.
* som.c: Replace alloca-conf.h inclusion with code recommended in autoconf documentation.
* elf64-hppa.c: Likewise.

Support the use of the STT_COMMON type.  (In source and object files only at the moment)

* mi/mi-main.c (captured_mi_execute_command): Clear mi_error_message
after freeing it.

* tls.m4 (GCC_CHECK_TLS): Rename have_tls to gcc_cv_have_tls.
(GCC_CHECK_CC_TLS): Rename have_cc_tls to gcc_cv_have_cc_tls.

* m32r-tdep.c (decode_prologue): Sign extend offset for
"addi sp, xx" case.
(m32r_frame_unwind_cache): Likewise.

* ppc-opc.c (powerpc_opcodes): Fix the first two operands of
dquaiq. to use the TE and FRT macros.

gas/

* config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted
according to major opcode number.

opcodes/

* ppc-opc.c (TE): Correct signedness.
(powerpc_opcodes): Sort psq_st and psq_stu according to major
opcode number.

From Craig Silverstein: support local GOT relocs for i386.

daily update

*** empty log message ***

2007-10-15  Patrick Mansfield <patmans@us.ibm.com>

        * Makefile.def: To avoid problems running with parallel makes,
        build newlib before libgloss so that target specific header
        files are availble.
        * Makefile.in: Regenerate.

* rs6000-tdep.c (skip_prologue): Restore comment with
function description to its proper place.

* NEWS: Mention gdbserver PowerPC improvements.

* Makefile.in (clean): Remove new files.
(powerpc-32.o, powerpc-32.c, powerpc-e500.o, powerpc-e500.c)
(powerpc-64.o, powerpc-64.c): New rules.
* configure.srv: Use alternate register sets for powerpc64-*-linux*
with AltiVec, powerpc-*-linux* with AltiVec, and powerpc-*-linux*
with SPE.
* linux-ppc-low.c (ppc_regmap): Do not fetch the FP registers for
SPE targets.
(ppc_cannot_store_register): Do not check for FPSCR for SPE targets.
(PTRACE_GETVRREGS, PTRACE_SETVRREGS, SIZEOF_VRREGS, ppc_fill_vrregset)
(ppc_store_vrregset, PTRACE_GETEVRREGS, PTRACE_SETEVRREGS)
(struct gdb_evrregset_t, ppc_fill_evrregset, ppc_store_evrregset): New.
(target_regsets): Add AltiVec and SPE register sets.
* configure.ac: Check for AltiVec and SPE.
* linux-ppc64-low.c (PTRACE_GETVRREGS, PTRACE_SETVRREGS, SIZEOF_VRREGS)
(ppc_fill_vrregset, ppc_store_vrregset): New.
(target_regsets): Add AltiVec register set.
* configure: Regenerated.

* features/Makefile (WHICH): Add PowerPC register definitions.
(rs6000/powerpc-32-expedite, rs6000/powerpc-e500-expedite)
(rs6000/powerpc-64-expedite): New macros.
($(outdir)/%.dat): Handle subdirectories.
* regformats/rs6000/powerpc-32.dat, regformats/rs6000/powerpc-64.dat,
regformats/rs6000/powerpc-e500.dat: New generated files.

* ppc-linux-nat.c (ppc_linux_read_description): New.
(_initialize_ppc_linux_nat): Set to_read_description.
* ppc-tdep.h (tdesc_powerpc_e500): Declare.

* NEWS: Document target described register support for PowerPC.
* ppc-tdep.h: Remove ppc_spr constants.
(struct gdbarch_tdep): Remove regs, ppc_sr0_regnum, and
ppc_builtin_type_vec128 members.
(PPC_R0_REGNUM, PPC_F0_REGNUM, PPC_PC_REGNUM, PPC_MSR_REGNUM)
(PPC_CR_REGNUM, PPC_LR_REGNUM, PPC_CTR_REGNUM, PPC_XER_REGNUM)
(PPC_FPSCR_REGNUM, PPC_MQ_REGNUM, PPC_SPE_UPPER_GP0_REGNUM)
(PPC_SPE_ACC_REGNUM, PPC_SPE_FSCR_REGNUM, PPC_VR0_REGNUM)
(PPC_VSCR_REGNUM, PPC_VRSAVE_REGNUM, PPC_NUM_REGS): New constants.
* rs6000-tdep.c: Include preparsed descriptions.
(init_sim_regno_table): Do not iterate over pseudo registers.
Look up segment registers by name.  Use sim_spr_register_name
for SPRs.
(rs6000_register_sim_regno): Call init_sim_regno_table here.
(rs6000_builtin_type_vec128): Delete.
(rs6000_register_name): Only handle SPE pseudo registers and upper
halves.  Call tdesc_register_name for everything else.
(rs6000_register_type): Delete.  Replace with...
(rs6000_pseudo_register_type): ...this new function.  Only handle
SPE pseudo registers.
(rs6000_register_reggroup_p): Delete.  Replace with...
(rs6000_pseudo_register_reggroup_p): ...this new function.  Only
handle SPE pseudo registers.
(rs6000_convert_register_p): Use ppc_fp0_regnum instead of
"struct reg".
(rs6000_register_to_value, rs6000_value_to_register): Remove check
of reg->fpr.
(e500_register_reggroup_p): Delete.
(STR, R, R4, R8, R16, F, P8, R32, R64, R0, A4, S, S4, SN4, S64)
(COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_UISA_NOFP_SPRS)
(PPC_SEGMENT_REGS, PPC_OEA_SPRS, PPC_ALTIVEC_REGS, PPC_SPE_GP_REGS)
(PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): Delete macros.
(registers_powerpc, registers_403, registers_403GC, registers_505)
(registers_860, registers_601, registers_602, registers_603)
(registers_604, registers_750, registers_7400, registers_e500): Delete
variables.
(struct variant): Delete nregs, npregs, num_tot_regs, and regs.  Add
tdesc.
(tot_num_registers, num_registers, num_pseudo_registers): Delete.
(variants): Delete outdated comment.  Use standard target descriptions
instead of "struct reg" arrays.
(init_variants): Delete.
(rs6000_gdbarch_init): Do not guess word size from the BFD
architecture if we have a target description.  Select a variant
before creating a new architecture.  Use the variant's target
description if the target did not define a register layout.
Validate target-supplied registers.  Reject mismatches.  Use
fixed register numbers and new constants instead of magic
numbers.  Call set_gdbarch_ps_regnum.  Call tdesc_use_registers.
(_initialize_rs6000_tdep): Initialize the preparsed target
descriptions.
* target-descriptions.c (tdesc_predefined_types): Add int128 and
uint128.
(tdesc_find_register_early): New function.
(tdesc_numbered_register): Use it.
(tdesc_register_size): New function.
(tdesc_use_registers): Take a target_desc argument.  Do not use
gdbarch_target_desc.
* target-descriptions.h (tdesc_use_registers): Update prototype
and comment.
(tdesc_register_size): New prototype.
* Makefile.in (powerpc_32_c, powerpc_403_c, powerpc_403gc_c)
(powerpc_505_c, powerpc_601_c, powerpc_602_c, powerpc_603_c)
(powerpc_604_c, powerpc_64_c, powerpc_7400_c, powerpc_750_c)
(powerpc_860_c, powerpc_e500_c, rs6000_c): New macros.
(rs6000-tdep.o): Update.
* arm-tdep.c (arm_gdbarch_init): Update call to tdesc_use_registers.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.

* gdb.texinfo (Predefined Target Types): Add int128
and uint128.
(Standard Target Features): Add PowerPC features.

* gdb.xml/tdesc-regs.exp: Add PowerPC support.

* sim-ppc.h (sim_spr_register_name): New prototype.

* gdb-sim.c (regnum2spr): Rename to...
(sim_spr_register_name): ... this.  Make global.

* features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: New
generated files.

* features/rs6000/power-altivec.xml, features/rs6000/power-core.xml,
features/rs6000/power-fpu.xml, features/rs6000/power-oea.xml,
features/rs6000/power-spe.xml, features/rs6000/power64-core.xml: New
feature descriptions for standard PowerPC register sets.

* features/rs6000/powerpc-32.xml, features/rs6000/powerpc-403.xml,
features/rs6000/powerpc-403gc.xml, features/rs6000/powerpc-505.xml,
features/rs6000/powerpc-601.xml, features/rs6000/powerpc-602.xml,
features/rs6000/powerpc-603.xml, features/rs6000/powerpc-604.xml,
features/rs6000/powerpc-64.xml, features/rs6000/powerpc-7400.xml,
features/rs6000/powerpc-750.xml, features/rs6000/powerpc-860.xml,
features/rs6000/powerpc-e500.xml, features/rs6000/rs6000.xml: New
target descriptions for PowerPC processors.

* target-descriptions.c (tdesc_predefined_types): New.
(tdesc_named_type): Use it.
(tdesc_type_id, maint_print_c_tdesc_cmd): New functions.
(_intialize_target_descriptions): Register "maint print c-tdesc".
* features/Makefile (XMLTOC, CFILES, GDB): New macros.
(cfiles, %.c): New rules.
* features/arm-with-iwmmxt.c, features/mips-linux.c,
features/mips64-linux.c: New generated files.

* arm-linux-nat.c: Include preparsed description instead of
"xml-support.h".
(super_xfer_partial, arm_linux_xfer_partial): Remove.
(arm_linux_read_description): New function.
(_initialize_arm_linux_nat): Set to_read_description instead of
to_xfer_partial.  Initialize preparsed description.
* config/arm/linux.mh (TDEP_XML): Delete.
* mips-linux-nat.c: Include preparsed descriptions instead of
"xml-support.h".
(super_xfer_partial, mips_linux_xfer_partial): Remove.
(mips_linux_read_description): New function.
(_initialize_mips_linux_nat): Set to_read_description instead of
to_xfer_partial.  Initialize preparsed description.
* config/mips/linux.mh (TDEP_XML): Delete.
* Makefile.in (XMLFILES): Remove $(TDEP_XML).
(features_headers, arm_with_iwmmxt_c, mips_linux_c)
(mips64_linux_c): New macros.
(arm-linux-nat.o, mips-linux-nat.o): Update.

* gdb.texinfo (Maintenance Commands): Document "maint print c-tdesc".

2007-10-15  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (dis386_twobyte): Reformat.
(prefix_table):  Likewise.
(three_byte_table): Likewise.

2007-10-15  Pierre Muller  <muller@ics.u-strasbg.fr>

* cp-abi.c (set_cp_abi_as_auto_default): ARI fix:
Replace xasprintf by xstrprintf.
symfile-mem.c (add_vsyscall_page): Ditto.

2007/10/15  Pierre Muller  <muller@ics.u-strasbg.fr>

* gdb.base/sigstep.c (main): Add checks for
return values for setitimer call.
Call setitimer again with itimer = ITIMER_REAL
if first call to setitimer fails.

From Craig Silverstein: add LD to LE TLS optimizations.

From Craig Silverstein: call unlink_if_ordinary.

Fix exit status.

* mcore-dis.c (print_insn_mcore): Protect "fprintf" var against
macro expansion.

* read.c (do_s_func): Check asprintf return status.
* stabs.c (stabs_generate_asm_func): Likewise.
(stabs_generate_asm_endfunc): Likewise.

* objdump.c (print_line): Check fwrite return value.
* srconv.c (checksum, wr_tr, wr_cs): Likewise.
* sysdump.c (fillup): Return zero on getc or fread EOF.  Return count
read.

* chew.c (write_buffer): Check fwrite return value.

* coff-arm.c (arm_emit_base_file_entry): Check fwrite return value.
Return status.  Adjust callers.
* coff-mcore.c (mcore_emit_base_file_entry): Likewise.
* coff-ppc.c (write_base_file_entry): New function.
(coff_ppc_relocate_section): Use it.
* elf32-arm.c (find_thumb_glue): Check asprintf return status.
(find_arm_glue): Likewise.
* vms-misc.c (_bfd_vms_output_flush): Check fwrite return value.

*** empty log message ***

daily update

Keep track of weak aliases, so that overriding environ works.

Adjust linkonce symbol name algorithm to work for
.gnu.linkonce.t.__i686.get_pc_thunk.bx.

Better multiple definition errors.

Remove extraneous newlines.

Remove extraneous newline.

Run all error handling through an Errors object.  Delete output file
on error.

Fix typo in comment.

From Craig Silverstein: add some internationalization calls.

Only run static TLS tests on glibc 2.4 or later.

From Craig Silverstein: TLS test cleanups.

From Craig Silverstein: always use 32-bit format for gold note.

From Craig Silverstein: error if we see a dynamic object when the
-static option was given.

*** empty log message ***

daily update

* ia64-linux-nat.c (ia64_register_addr): Add gdbarch parameter,
replacing use of global current_gdbarch.
(ia64_cannot_fetch_register, ia64_cannot_store_register): Likewise.
(ia64_linux_fetch_register, ia64_linux_store_register): Update callers.

* ia64-tdep.c (SIGCONTEXT_REGISTER_ADDRESS): Remove macro.
(ia64_sigtramp_frame_init_saved_regs): Add next_frame parameter,
replace uses of SIGCONTEXT_REGISTER_ADDRESS.
(ia64_sigtramp_frame_cache): Update caller.

From Craig Silverstein: use tls.h in x86_64.cc.