drm/tilcdc: use devm_of_find_backlight

Look up backlight device using devm_of_find_backlight().
This simplifies the code and prevents us from hardcoding
the node name in the driver.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514191001.457441-3-sam@ravnborg.org

drm/omap: display: use devm_of_find_backlight

Look up backlight device using devm_of_find_backlight().
This simplifies the code and prevents us from hardcoding
the node name in the driver.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Zheng Bin <zhengbin13@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Enrico Weigelt <info@metux.net>
Cc: Allison Randal <allison@lohutok.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514191001.457441-2-sam@ravnborg.org

drm/sun4i: mixer: Call of_dma_configure if there's an IOMMU

The main DRM device is actually a virtual device so it doesn't have the
iommus property, which is instead on the DMA masters, in this case the
mixers.

Add a call to of_dma_configure with the mixers DT node but on the DRM
virtual device to configure it in the same way than the mixers.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/9a4daf438dd3f2fe07afb23688bfb793a0613d7d.1589378833.git-series.maxime@cerno.tech

dt-bindings: display: sun8i-mixer: Allow for an iommu property

The H6 mixer is attached to an IOMMU, so let's allow that property to be
set in the bindings.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/7941e0c02794e6336da75fcac950ecd43be7fd97.1589378833.git-series.maxime@cerno.tech

drm/dp_mst: Fix timeout handling of MST down messages

This fixes the following use-after-free problem in case an MST down
message times out, while waiting for the response for it:

[  449.022841] [drm:drm_dp_mst_wait_tx_reply.isra.26] timedout msg send 0000000080ba7fa2 2 0
[  449.022898] ------------[ cut here ]------------
[  449.022903] list_add corruption. prev->next should be next (ffff88847dae32c0), but was 6b6b6b6b6b6b6b6b. (prev=ffff88847db1c140).
[  449.022931] WARNING: CPU: 2 PID: 22 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70
[  449.022935] Modules linked in: asix usbnet mii snd_hda_codec_hdmi mei_hdcp i915 x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep e1000e snd_hda_core ptp snd_pcm pps_core mei_me mei intel_lpss_pci prime_numbers
[  449.022966] CPU: 2 PID: 22 Comm: kworker/2:0 Not tainted 5.7.0-rc3-CI-Patchwork_17536+ #1
[  449.022970] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2457.A16.1912270059 12/27/2019
[  449.022976] Workqueue: events_long drm_dp_mst_link_probe_work
[  449.022982] RIP: 0010:__list_add_valid+0x4d/0x70
[  449.022987] Code: c3 48 89 d1 48 c7 c7 f0 e7 32 82 48 89 c2 e8 3a 49 b7 ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 40 e8 32 82 e8 23 49 b7 ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 90 e8 32 82 e8
[  449.022991] RSP: 0018:ffffc900001abcb0 EFLAGS: 00010286
[  449.022995] RAX: 0000000000000000 RBX: ffff88847dae2d58 RCX: 0000000000000001
[  449.022999] RDX: 0000000080000001 RSI: ffff88849d914978 RDI: 00000000ffffffff
[  449.023002] RBP: ffff88847dae32c0 R08: ffff88849d914978 R09: 0000000000000000
[  449.023006] R10: ffffc900001abcb8 R11: 0000000000000000 R12: ffff888490d98400
[  449.023009] R13: ffff88847dae3230 R14: ffff88847db1c140 R15: ffff888490d98540
[  449.023013] FS:  0000000000000000(0000) GS:ffff88849ff00000(0000) knlGS:0000000000000000
[  449.023017] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  449.023021] CR2: 00007fb96fafdc63 CR3: 0000000005610004 CR4: 0000000000760ee0
[  449.023025] PKRU: 55555554
[  449.023028] Call Trace:
[  449.023034]  drm_dp_queue_down_tx+0x59/0x110
[  449.023041]  ? rcu_read_lock_sched_held+0x4d/0x80
[  449.023050]  ? kmem_cache_alloc_trace+0x2a6/0x2d0
[  449.023060]  drm_dp_send_link_address+0x74/0x870
[  449.023065]  ? __slab_free+0x3e1/0x5c0
[  449.023071]  ? lockdep_hardirqs_on+0xe0/0x1c0
[  449.023078]  ? lockdep_hardirqs_on+0xe0/0x1c0
[  449.023097]  drm_dp_check_and_send_link_address+0x9a/0xc0
[  449.023106]  drm_dp_mst_link_probe_work+0x9e/0x160
[  449.023117]  process_one_work+0x268/0x600
[  449.023124]  ? __schedule+0x307/0x8d0
[  449.023139]  worker_thread+0x37/0x380
[  449.023149]  ? process_one_work+0x600/0x600
[  449.023153]  kthread+0x140/0x160
[  449.023159]  ? kthread_park+0x80/0x80
[  449.023169]  ret_from_fork+0x24/0x50

Fixes: d308a881a591 ("drm/dp_mst: Kill the second sideband tx slot, save the world")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513103155.12336-1-imre.deak@intel.com

drm/vblank: remove outdated and noisy output

The R-Car DU driver calls drm_vblank_init via some helper functions in
probe(). From what I checked, most drivers do this as well. I have a
config now where DU always stays in deferred_probe state because of a
missing dependency. This means that every time I rebind another driver
like MMC, the vblank init message is displayed again when the DU driver
is retried. Because the message doesn't really carry a useful
information, I suggest to simply drop it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513201016.23047-1-wsa+renesas@sang-engineering.com

dma-buf: Use atomic_fetch_add() for the context id

Now that atomic64_fetch_add() exists we can use it to return the base
context id, rather than the atomic64_add_return(N) - N concoction.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200513074809.18194-2-chris@chris-wilson.co.uk

drm/mcde: dsi: Fix return value check in mcde_dsi_bind()

The of_drm_find_bridge() function returns NULL on error, it doesn't return
error pointers so this check doesn't work.

Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430073145.52321-1-weiyongjun1@huawei.com

drm/mgag200: Embed connector instance in struct mga_device

Storing the connector instance in struct mga_device avoids some
dynamic memory allocation. On errors, the connector's initializer
function now destroys the i2c structure. Done in preparation of
converting mgag200 to simple-KMS helpers.

v2:
* improved commit message (Michael)
* fixed error message for mgag200_vga_connector_init() (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-7-tzimmermann@suse.de

drm/mgag200: Remove unused fields from struct mga_device

The fields mode_info, num_crtcs and mode in struct mga_device serve
no purpose. Remove them.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-6-tzimmermann@suse.de

drm/mgag200: Use managed mode-config initialization

Mode configuration is now cleanued up automatically. While at it,
move all mode-config code into mgag200_mode.c. Done in preparation
of switching mgag200 to simple-KMS helpers.

v2:
* improve commit message (Sam)
* rebased during cherry pick
* also move bpp_shift initialization

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: John Donnelly <John.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-5-tzimmermann@suse.de

drm/mgag200: Integrate init function into load function

Done to simplify initialization code before embedding the DRM device
instance in struct mga_device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-4-tzimmermann@suse.de

drm/mgag200: Remove several references to struct mga_device.dev

Done in preparation of embedding the DRM device in struct mga_device.
This patch makes the patch for embedding more readable.

v2:
* improved commit message (Daniel)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-3-tzimmermann@suse.de

drm/mgag200: Convert struct drm_device to struct mga_device with helper

Mgag200 uses dev_private to look up struct mga_device for instances
of struct drm_device. Use of dev_private is deprecated, so hide it in
the helper function to_mga_device().

v2:
* make to_mga_device() a function (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090315.21274-2-tzimmermann@suse.de

video: fbdev: pxa168fb: make pxa168fb_init_mode() return void

No other functions use the return value of pxa168fb_init_mode() and the
return value is always 0 now. Make it return void. This fixes the
following coccicheck warning:

drivers/video/fbdev/pxa168fb.c:565:5-8: Unneeded variable: "ret". Return
"0" on line 597

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed indent]
Link: https://patchwork.freedesktop.org/patch/msgid/20200506061745.19451-1-yanaijie@huawei.com

drm/i2c/tda998x: Make tda998x_audio_digital_mute static

Fix the following sparse warning:

drivers/gpu/drm/i2c/tda998x_drv.c:1136:5: warning:
symbol 'tda998x_audio_digital_mute' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1588819768-11818-1-git-send-email-zou_wei@huawei.com

drm/panel-simple: Support hpd-gpios for delaying prepare()

People use panel-simple when they have panels that are builtin to
their device.  In these cases the HPD (Hot Plug Detect) signal isn't
really used for hotplugging devices but instead is used for power
sequencing.  Panel timing diagrams (especially for eDP panels) usually
have the HPD signal in them and it acts as an indicator that the panel
is ready for us to talk to it.

Sometimes the HPD signal is hooked up to a normal GPIO on a system.
In this case we need to poll it in the correct place to know that the
panel is ready for us.  In some system designs the right place for
this is panel-simple.

When adding this support, we'll account for the case that there might
be a circular dependency between panel-simple and the provider of the
GPIO.  The case this was designed for was for the "ti-sn65dsi86"
bridge chip.  If HPD is hooked up to one of the GPIOs provided by the
bridge chip then in our probe function we'll always get back
-EPROBE_DEFER.  Let's handle this by allowing this GPIO to show up
late if we saw -EPROBE_DEFER during probe.  NOTE: since the
gpio_get_optional() is used, if the "hpd-gpios" isn't there our
variable will just be NULL and we won't do anything in prepare().

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.3.I53fed5b501a31e7a7fa13268ebcdd6b77bd0cadd@changeid

dt-bindings: display: Add hpd-gpios to panel-common bindings

In the cases where there is no connector in a system there's no great
place to put "hpd-gpios".  As per discussion [1] the best place to put
it is in the panel.  Add this to the device tree bindings.

[1] https://lore.kernel.org/r/20200417180819.GE5861@pendragon.ideasonboard.com

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.2.I1976736b400a3b30e46efa47782248b86b3bc627@changeid

panel: simple: Add BOE NV133FHM-N62

All info I could find about this panel show that it behaves the same
as the BOE NV133FHM-N61.  However, it definitely appears to be a
unique panel because reading the EDID shows "NV133FHM-N62".  We'll add
a string match for the new panel but until we find something unique
about it we'll just point at the N61's structures.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.3.I525ebd471f5340a6a369af7bde06ef04174d2f41@changeid

dt-bindings: display: simple: Add BOE NV133FHM-N62

This panel appears to be the same or nearly the same as the BOE
NV133FHM-N61, but since (in the very least) it identifies itself as a
different model in the EDID we should add a new compatible string for
it.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.2.I37c879ef4ec6d4028a3d45728bc3a58060bba175@changeid

panel: simple: Fix size and bpp of BOE NV133FHM-N61

The BOE NV133FHM-N61 is documented in the original commit to be a
13.3" panel, but the size listed in our struct doesn't match.
Specifically:

  math.sqrt(30.0 * 30.0 + 18.7 * 18.7) / 2.54 ==> 13.92

Searching around on the Internet shows that the size that was in the
structure was the "Outline Size", not the "Display Area".  Let's fix
it.

Also the Internet says that this panel supports 262K colors.  That's
6bpp, not 8bpp.

Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200508155859.1.I4d29651c0837b4095fb4951253f44036a371732f@changeid

uapi/drm/drm_fourcc.h: Note on platform specificity for format modifiers

Make an additional note on DRM format modifiers for x and y tiling. These
format modifiers are defined for BDW+ platforms and therefore definition
is not valid for older gens. This is due to address swizzling for tiled
surfaces is no longer used. For newer platforms main memory controller has
a more effective address swizzling algorithm.

v2: Rephrase comment (Daniel)

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200506120827.12250-1-mika.kahola@intel.com

drm/ast: Don't check new mode if CRTC is being disabled

Suspending failed because there's no mode if the CRTC is being
disabled. Early-out in this case. This fixes runtime PM for ast.

v3:
* fixed commit message
v2:
* added Tested-by/Reported-by tags
* added Fixes tags and CC (Sam)
* improved comment

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Cary Garrett <cogarre@gmail.com>
Tested-by: Cary Garrett <cogarre@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: b48e1b6ffd28 ("drm/ast: Add CRTC helpers for atomic modesetting")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200507090640.21561-1-tzimmermann@suse.de

drm/ast: Make ast_primary_plane_helper_atomic_update static

Fix the following sparse warning:

drivers/gpu/drm/ast/ast_mode.c:564:6: warning:
symbol 'ast_primary_plane_helper_atomic_update'
was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1588819206-11406-1-git-send-email-zou_wei@huawei.com

drivers: drm: panel: Add ASUS TM5P5 NT35596 panel driver

This adds support for TMP5P5 NT35596 1080x1920 video
mode panel that can be found on some Asus Zenfone 2
Laser (Z00T) devices.

This panel seems to only be found in this device
and we have no straightforward way of actually
getting the correct model number, as no schematics
are released publicly.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20200506210957.344590-2-konradybcio@gmail.com

dt-bindings: display: Document ASUS Z00T TM5P5 NT35596 panel compatible

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200506210957.344590-3-konradybcio@gmail.com

drm: panel: add MODULE_LICENSE to panel-visionox-rm69299.c

Add MODULE_LICENSE() to the panel-visionox-rm69299 driver
to fix a build warning.

WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-visionox-rm69299.o

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: c7f66d32dd43 ("drm/panel: add support for rm69299 visionox panel")
Cc: Harigovindan P <harigovi@codeaurora.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes: tag]
Link: https://patchwork.freedesktop.org/patch/msgid/bbb7b3b3-9968-9a1f-8ef6-2e8e3be998f6@infradead.org

drm/vkms: Hold gem object while still in-use

We need to keep the reference to the drm_gem_object
until the last access by vkms_dumb_create.

Therefore, the put the object after it is used.

This fixes a use-after-free issue reported by syzbot.

While here, change vkms_gem_create() symbol to static.

Reported-and-tested-by: syzbot+e3372a2afe1e7ef04bc7@syzkaller.appspotmail.com
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427214405.13069-1-ezequiel@collabora.com

drm/vkms: enable cursor by default

This patch proposes a change in the behavior of the cursor to enable it as
soon as the vkms module is added. Enabling the cursor by default appears
to be an expected and more friendly behavior, especially when running IGT
tests.

Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200321203740.pg3r7f4vybruowox@smtp.gmail.com

drm/udl: Make udl_handle_damage static

Fix the following sparse warning:

drivers/gpu/drm/udl/udl_modeset.c:269:5: warning: symbol 'udl_handle_damage'
was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1588248797-70568-1-git-send-email-zou_wei@huawei.com

video: fbdev: valkyriefb.c: fix warning comparing pointer to 0

Fix the following coccicheck warning:

drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to
0, suggest !E
drivers/video/fbdev/valkyriefb.c:334:12-13: WARNING comparing pointer to
0
drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to
0

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429140942.8137-1-yanaijie@huawei.com

drm/panel: add support for rm69299 visionox panel

Add support for Visionox rm69299 panel.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fix checkpatch warnings, added sentinel ]
Link: https://patchwork.freedesktop.org/patch/msgid/20200421045508.21137-2-harigovi@codeaurora.org

dt-bindings: documenting compatible string vendor "visionox"

Documenting compatible string vendor "visionox" in vendor-prefix yaml file.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429054515.4976-2-harigovi@codeaurora.org

video: fbdev: w100fb: Fix a potential double free.

Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in
the 'w100fb_restore_vidmem' function. (these functions are called
respectively from the 'suspend' and the 'resume' functions)

However, it is also freed in the 'remove' function.

In order to avoid a potential double free, set the corresponding pointer
to NULL once freed in the 'w100fb_restore_vidmem' function.

Fixes: aac51f09d96a ("[PATCH] w100fb: Rewrite for platform independence")
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: <stable@vger.kernel.org> # v2.6.14+
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200506181902.193290-1-christophe.jaillet@wanadoo.fr

fbdev: aty: use true, false for bool variables in atyfb_base.c

Fix the following coccicheck warning:

drivers/video/fbdev/aty/atyfb_base.c:3822:3-10: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/aty/atyfb_base.c:3824:3-9: WARNING: Assignment of
0/1 to bool variable

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422071854.513-1-yanaijie@huawei.com

video: uvesafb: use true,false for bool variables

Fix the following coccicheck warning:

drivers/video/fbdev/uvesafb.c:48:12-17: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1827:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1829:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1835:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1837:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1839:3-8: WARNING: Assignment of 0/1 to
bool variable

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422071845.403-1-yanaijie@huawei.com

video: udlfb: use true,false for bool variables

Fix the following coccicheck warning:

drivers/video/fbdev/udlfb.c:67:12-19: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:68:12-20: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:69:12-18: WARNING: Assignment of 0/1 to bool
variable

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422071836.49123-1-yanaijie@huawei.com

video: fbdev: i810: use true,false for bool variables

Fix the following coccicheck warning:

drivers/video/fbdev/i810/i810_main.c:1969:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1971:3-8: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1973:3-9: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1975:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:2001:3-9: WARNING: Assignment of
0/1 to bool variable

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422071826.49038-1-yanaijie@huawei.com

drm/mm: optimize rb_hole_addr rbtree search

Userspace can severely fragment rb_hole_addr rbtree by manipulating
alignment while allocating buffers. Fragmented rb_hole_addr rbtree
would result in large delays while allocating buffer object for a
userspace application. It takes long time to find suitable hole
because if we fail to find a suitable hole in the first attempt
then we look for neighbouring nodes using rb_prev()/rb_next().
Traversing rbtree using rb_prev()/rb_next() can take really long
time if the tree is fragmented.

This patch improves searches in fragmented rb_hole_addr rbtree by
modifying it to an augmented rbtree which will store an extra field
in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum
hole size for its subtree in drm_mm_node->subtree_max_hole. Using
drm_mm_node->subtree_max_hole, it is possible to eliminate a complete
subtree if that subtree is unable to serve a request hence reducing
number of rb_prev()/rb_next() used.

With this patch applied, 1 million bo allocs on amdgpu took ~8 sec,
compared to 50k bo allocs which took 28 sec without it.

partial test code:
int test_fragmentation(void)
{

int i = 0;
        uint32_t  minor_version;
        uint32_t  major_version;

        struct amdgpu_bo_alloc_request request = {};
        amdgpu_bo_handle vram_handle[MAX_ALLOC] = {};
        amdgpu_device_handle device_handle;

        request.alloc_size = 4096;
        request.phys_alignment = 8192;
        request.preferred_heap = AMDGPU_GEM_DOMAIN_VRAM;

        int fd = open("/dev/dri/card0", O_RDWR | O_CLOEXEC);
        amdgpu_device_initialize(fd, &major_version,  &minor_version,
 &device_handle);

        for (i = 0; i < MAX_ALLOC; i++) {
                amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]);
        }

        for (i = 0; i < MAX_ALLOC; i++)
                amdgpu_bo_free(vram_handle[i]);

        return 0;
}

v2:
Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole
v3:
insert_hole_addr() should be static a function
fix return value of next_hole_high_addr()/next_hole_low_addr()
Reported-by: kbuild test robot <lkp@intel.com>
v4:
Fix commit message.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/364341/
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/ttm: Remove reference to the mem_glob member

It was removed in:

Author: Christian König <christian.koenig@amd.com>
Date:   Wed Sep 25 11:38:50 2019 +0200

    drm/ttm: remove pointers to globals

Signed-off-by: Maya Rashish <coypu@sdf.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/360750/
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/client: Dual licence the header in GPL-2 and MIT

Source file was dual licenced but the header was omitted, fix that.
Contributors for this file are:
Daniel Vetter <daniel.vetter@ffwll.ch>
Matt Roper <matthew.d.roper@intel.com>
Maxime Ripard <mripard@kernel.org>
Noralf Trønnes <noralf@tronnes.org>
Thomas Zimmermann <tzimmermann@suse.de>

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Emmanuel Vadot <manu@FreeBSD.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430153347.85323-1-manu@FreeBSD.org

drm: Replace drm_modeset_lock/unlock_all with DRM_MODESET_LOCK_ALL_* helpers

As suggested by the TODO list for the kernel DRM subsystem, replace
the deprecated functions that take/drop modeset locks with new helpers.

Signed-off-by: Michal Orzel <michalorzel.eng@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1588093804-30446-1-git-send-email-michalorzel.eng@gmail.com

drm/meson: add mode selection limits against specific SoC revisions

The Amlogic S805X/Y uses the same die as the S905X, but with more
limited graphics capabilities.

This adds a soc version detection adding specific limitations on the HDMI
mode selections.

Here, we limit to HDMI 1.2a max HDMI PHY clock frequency.

Changes sinces v1:
- Moved frequency check in the vclk code, and also checks DMT modes

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed commit message with HDMI 1.2a instead of HDMI 1.3a]
Link: https://patchwork.freedesktop.org/patch/msgid/20200428092147.13698-1-narmstrong@baylibre.com

drm/bridge: chrontel-ch7033: Add a new driver

This is a driver for video encoder with VGA and DVI/HDMI outputs.

There is no documentation for the chip -- the operation was guessed from
what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
come from the ch7035 driver in Mediatek's GPL code dump.

Only bare minimum is implemented -- no fancy stuff, such as scaling. That
would only worsen our misery. We don't load the firmware and we don't need
to even bother enabling the MCU.  There are probably no distributable
firmware images anyway.

Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
with VGA as well as DVI.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk

dt-bindings: display: Add Chrontel CH7033 Video Encoder binding

Add binding document for the Chrontel CH7033 VGA/DVI/HDMI Encoder.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-3-lkundrak@v3.sk

dt-bindings: Add vendor prefix for Chrontel, Inc.

Chrontel makes encoders for video displays and perhaps other stuff.
Their web site is http://www.chrontel.com/.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-2-lkundrak@v3.sk

drm/tidss: remove AM65x PG1 YUV erratum code

AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong
colors on the screen. This issue is fixed in PG2 hardware.

The driver currently has code to hide YUV pixel formats from the
userspace. To support PG2, we would need to add code to detect the SoC
version and hide the YUV formats based on that.

However, as PG1 will be phased out and PG2 will be the main platform, a
much simpler solution is just to drop the code in question. The downside
is that the users will be able to use YUV formats on PG1, getting wrong
colors on the screen. On the other hand, that may also be a plus, as the
same applications will now work on PG1 and PG2, even if the colors are
wrong on PG1.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429121022.3871-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>

drm/omap: change default signal polarities and drives

If the given videomode does not specify DISPLAY_FLAG_* for the specific
signal property, the driver used a default value. These defaults were
never thought through, as the expectation was that all the DISPLAY_FLAGS
are always set explicitly.

With DRM bridge and panel drivers this is not the case, and while that
issue should be resolved in the future, it's still good to have sane
signal defaults.

This patch changes the defaults to what the hardware has as reset
defaults. Also, based on my experience, I think they make sense and are
more likely correct than the defaults without this patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114151.25843-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

drm/panel: boe-tv101wum-n16: fine tune clock

fix boe_tv105wum_nw0 display shift.

Signed-off-by: David Lu <david.lu@bitland.com.cn>
Fixes: 963518c12431 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel")
Cc: David Lu <david.lu@bitland.com.cn>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag]
Link: https://patchwork.freedesktop.org/patch/msgid/20200428064521.21511-1-david.lu@bitland.com.cn

dt-bindings: display: dw_mipi_dsi.txt: convert to yaml

This converts the Synopsis MIPI DSI binding documentation to yaml and
should be quite straightforward. I've added a missing ref clk and also
added Philippe as maintainer b/c he's the original txt author following
the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org.

Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: devicetree@vger.kernel.org
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423100058.1734009-1-adrian.ratiu@collabora.com

drm/panel: panel-simple: fix AUO G101EVN010 connector/panel type

The AUO G101EVN010 is a 18-bit LVDS panel, not a parallel panel, as
indicated by the current bus_format.

Fix the bus_format to MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, and also set the
connector_type to LVDS.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[updated patch subject]
Link: https://patchwork.freedesktop.org/patch/msgid/20200417114043.25381-1-tomi.valkeinen@ti.com

dt-bindings: Add binding for IT6505.

Add a DT binding documentation for IT6505.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed example to use i2c]
Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-3-git-send-email-allen.chen@ite.com.tw

dt-bindings: fix vendor prefix for ITE Tech. Inc.

ITE Tech. Inc. (abbreviated as ITE ) is a professional fabless IC
design house. ITE's core technology includes PC and NB Controller chips,
Super I/O, High Speed Serial Interface, Video Codec, Touch Sensing,
Surveillance, OFDM, Sensor Fusion, and so on.

Our official name is "ITE Tech. Inc.", so change "ITE," to "ITE.".

more information on: http://www.ite.com.tw/

Signed-off-by: Allen Chen <allen.chen@ite.com.tw>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: 17ff9478ffa3 ("dt-bindings: Add ITE Tech prefix")
Cc: Marek Vasut <marex@denx.de>
Cc: devicetree@vger.kernel.org
Cc: Allen Chen <allen.chen@ite.com.tw>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[added fixes tag and updated subject]
Link: https://patchwork.freedesktop.org/patch/msgid/1587979103-5630-2-git-send-email-allen.chen@ite.com.tw

drm: Correct DP DSC macro typo

In the file drm_dp_helper.h we have a macro named
DP_DSC_THROUGHPUT_MODE_{0,1}_UPSUPPORTED, the correct name should be
DP_DSC_THROUGHPUT_MODE_{0,1}_UNSUPPORTED. This commits adjusts this typo
in the header file and in other places that attempt to access this
macro.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429184142.1867987-1-Rodrigo.Siqueira@amd.com

drm/ast: remove duplicate assignment of ast_crtc_funcs member

The struct member 'set_config' was assigned twice:

static const struct drm_crtc_funcs ast_crtc_funcs = {
.reset = ast_crtc_reset,
.set_config = drm_crtc_helper_set_config,
......
.set_config = drm_atomic_helper_set_config,
......
};

Since the second one is which we use now in fact, we can remove the
first one.

This fixes the following coccicheck warning:

drivers/gpu/drm/ast/ast_mode.c:932:50-51: set_config: first occurrence
line 934, second occurrence line 937

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429141010.8445-1-yanaijie@huawei.com

drm/bridge: fix stack usage warning on old gcc

Some older versions of gcc badly optimize code that passes
an inline function argument into another function by reference,
causing huge stack usage:

drivers/gpu/drm/bridge/tc358768.c: In function 'tc358768_bridge_pre_enable':
drivers/gpu/drm/bridge/tc358768.c:840:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]

Use a temporary variable as a workaround and add a comment pointing
to the gcc bug.

Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428215408.4111675-1-arnd@arndb.de

video: fbdev: controlfb: fix build for COMPILE_TEST=y && PPC_PMAC=y && PPC32=n

powerpc allyesconfig fails like this:

drivers/video/fbdev/controlfb.c: In function 'controlfb_mmap':
drivers/video/fbdev/controlfb.c:756:23: error: implicit declaration of function 'pgprot_cached_wthru'; did you mean 'pgprot_cached'? [-Werror=implicit-function-declaration]
  756 |   vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
      |                       ^~~~~~~~~~~~~~~~~~~
      |                       pgprot_cached
drivers/video/fbdev/controlfb.c:756:23: error: incompatible types when assigning to type 'pgprot_t' {aka 'struct <anonymous>'} from type 'int'

Fix it by adding missing PPC32 dependency.

Fixes: a07a63b0e24d ("video: fbdev: controlfb: add COMPILE_TEST support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/fe520316-3863-e6c4-9581-5d709f49e906@samsung.com

drm: Nuke mode->hsync

Let's just calculate the hsync rate on demand. No point in wasting
space storing it and risking the cached value getting out of sync
with reality.

v2: Move drm_mode_hsync() next to its only users
    Drop the TODO

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com

MAINTAINERS: Restore alphabetical sorting

MAINTAINERS got sorted in

  commit 4400b7d68f6e ("MAINTAINERS: sort entries by entry name")

Merging from drm-next into drm-misc-next duplicated some of the
entries by restoring old, unsorted sections. Restore the sorted
list by removing the duplicates.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 08d99b2c23df ("Merge drm/drm-next into drm-misc-next")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200423074003.9637-1-tzimmermann@suse.de

drm: pl111: Move VExpress setup into versatile init

Since the VExpress setup in pl111_vexpress.c is now just a single
function call, let's move it into pl111_versatile.c and we can further
simplify pl111_versatile_init() by moving the other pieces for VExpress
into pl111_vexpress_clcd_init().

Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409013947.12667-4-robh@kernel.org

drm: pl111: Simplify vexpress init

The init VExpress variants currently instantiates a 'muxfpga' driver for
the sole purpose of getting a regmap for it. There's no reason to
instantiate a driver and doing so just complicates things. The muxfpga
driver also isn't unregistered properly on module unload. Let's
just simplify all this this by just calling
devm_regmap_init_vexpress_config() directly.

Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409013947.12667-3-robh@kernel.org

drm: pl111: Fix module autoloading

Add a missing MODULE_DEVICE_TABLE entry to fix module autoloading.

Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200409013947.12667-2-robh@kernel.org

drm/i915: Use devm_drm_dev_alloc

Luckily we're already well set up in the main driver, with
drm_dev_put() being the last thing in both the unload error case and
the pci remove function.

Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-39-daniel.vetter@ffwll.ch

drm/qxl: Don't use drm_device->dev_private

Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-28-daniel.vetter@ffwll.ch

drm/qxl: Use devm_drm_dev_alloc

Also need to remove the drm_dev_put from the remove hook.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-27-daniel.vetter@ffwll.ch

drm: make drm_file use keyed wakeups

Some processes, such as systemd, are only polling for EPOLLERR|EPOLLHUP.
As drm_file uses unkeyed wakeups, such a poll receives many spurious
wakeups from uninteresting events.

Use keyed wakeups to allow the wakeup target to more efficiently discard
these uninteresting events.

Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200424145103.3048-1-kl@kl.wtf

drm/bochs: Remove explicit drm_connector_register

This is leftovers from the old drm_driver->load callback
upside-down issues. It doesn't do anything for not-hotplugged
connectors since drm_dev_register takes care of that.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-60-daniel.vetter@ffwll.ch

drm/ast: Drop explicit connector register/unregister

This is only needed for hotpluggable connectors set up after
drm_dev_register().

Reviewed-by: Thomas Zimemrmann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-59-daniel.vetter@ffwll.ch

drm/aspeed: Use devm_drm_dev_alloc

As usual, we can drop the drm_dev_put() and need to embed the
drm_device. Since it's so few, also go right ahead and leave
drm_device->dev_private set to NULL, so that we always use the
container_of() upcast, which is faster anyway.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-56-daniel.vetter@ffwll.ch

drm/aspeed: Drop aspeed_gfx->fbdev

No longer used since the conversion to generic fbdev.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-55-daniel.vetter@ffwll.ch

drm/cirrus: Move to drm/tiny

Because it is. Huge congrats to everyone who made this kind of
refactoring happen!

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-38-daniel.vetter@ffwll.ch

drm/cirrus: Don't use drm_device->dev_private

Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.

Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: virtualization@lists.linux-foundation.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-37-daniel.vetter@ffwll.ch

drm/cirrus: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: virtualization@lists.linux-foundation.org
Cc: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-36-daniel.vetter@ffwll.ch

drm/komeda: use devm_drm_dev_alloc

Komeda uses the component framework, which does open/close a new
devres group around all the bind callbacks. Which means we can use
devm_ functions for managing the drm_device cleanup, with leaking
stuff in case of deferred probes or other reasons to unbind
components, or the component_master.

Also note that this fixes a double-free in the probe unroll code, bot
drm_dev_put and kfree(kms) result in the kms allocation getting freed.

Aside: komeda_bind could be cleaned up a lot, devm_kfree is a bit
redundant. Plus I'm not clear on why there's suballocations for
mdrv->mdev and mdrv->kms. Plus I'm not sure the lifetimes are correct
with all that devm_kzalloc usage ... That structure layout is also the
reason why komeda still uses drm_device->dev_private and can't easily
be replaced with a proper container_of upcasting. I'm pretty sure that
there's endless amounts of hotunplug/hotremove bugs in there with all
the unprotected dereferencing of drm_device->dev_private.

Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-33-daniel.vetter@ffwll.ch

drm/ingenic: Don't set drm_device->dev_private

Entirely not used, just copypasta.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-32-daniel.vetter@ffwll.ch

drm/ingenic: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-31-daniel.vetter@ffwll.ch

drm/mcde: Don't use drm_device->dev_private

Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.

v2: Move misplaced removal of double-assignment to this patch (Sam)

Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v1)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-30-daniel.vetter@ffwll.ch

drm/mcde: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

v2: Move misplaced double-assignement to next patch (Sam)

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-29-daniel.vetter@ffwll.ch

drm/tidss: Delete tidss->saved_state

Not used anymore since the switch to suspend/resume helpers.

Tested-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-26-daniel.vetter@ffwll.ch

drm/tidss: Don't use drm_device->dev_private

Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.

Tested-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-25-daniel.vetter@ffwll.ch

drm/tidss: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Tested-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-24-daniel.vetter@ffwll.ch

drm/gm12u320: Don't use drm_device->dev_private

Upcasting using a container_of macro is more typesafe, faster and
easier for the compiler to optimize.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-23-daniel.vetter@ffwll.ch

drm/gm12u320: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-22-daniel.vetter@ffwll.ch

drm/hx8357d: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-21-daniel.vetter@ffwll.ch

drm/ili9225: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: David Lechner <david@lechnology.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-20-daniel.vetter@ffwll.ch

drm/ili9341: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: David Lechner <david@lechnology.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-19-daniel.vetter@ffwll.ch

drm/ili9486: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-18-daniel.vetter@ffwll.ch

drm/mi0283qt: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-17-daniel.vetter@ffwll.ch

drm/repaper: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-16-daniel.vetter@ffwll.ch

drm/st7586: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Acked-by: David Lechner <david@lechnology.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-15-daniel.vetter@ffwll.ch

drm/st7735r: Use devm_drm_dev_alloc

Already using devm_drm_dev_init, so very simple replacment.

Aside: There was an oddity in the old code, we allocated priv but in
the error path we've freed priv->dbidev ...

Acked-by: David Lechner <david@lechnology.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-14-daniel.vetter@ffwll.ch

drm/udl: don't set drm_device->dev_private

We're mostly there already, just a handful of places that didn't use
the to_udl container_of cast. To make sure no new appear, don't set
->dev_private.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Allison Randal <allison@lohutok.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-13-daniel.vetter@ffwll.ch

drm/udl: Use devm_drm_dev_alloc

With Thomas' patch to clean up fbdev init this is a rather standard
conversion to the new wrapper macro.

v2: Rebase on top of Thomas' patches to remove the return value from
drm_fbdev_generic_setup()

v3: Update commit message to reflect the reality of the rebased patch
(Sam)

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-12-daniel.vetter@ffwll.ch

drm/v3d: Delete v3d_dev->pdev

We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check whether the pointer is for the same or
different objects if there's multiple
- compilers have an easier time too

To avoid having to pull in some big headers I implemented the casting
function as a macro instead of a static inline. Typechecking thanks to
container_of still assured.

But also a bit a bikeshed, so feel free to ignore.

v2: More parens for v3d_to_pdev macro (checkpatch)

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-11-daniel.vetter@ffwll.ch

drm/v3d: Delete v3d_dev->dev

We already have it in v3d_dev->drm.dev with zero additional pointer
chasing. Personally I don't like duplicated pointers like this
because:
- reviewers need to check whether the pointer is for the same or
  different objects if there's multiple
- compilers have an easier time too

But also a bit a bikeshed, so feel free to ignore.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-10-daniel.vetter@ffwll.ch

drm/v3d: Use devm_drm_dev_alloc

Also allows us to simplify the unroll code since the drm_dev_put
disappears.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-9-daniel.vetter@ffwll.ch

drm/v3d: Don't set drm_device->dev_private

And switch the helper over to container_of, which is a bunch faster
than chasing a pointer. Plus allows gcc to see through this maze.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-8-daniel.vetter@ffwll.ch

drm/vboxvideo: Use devm_gen_pool_create

Aside from deleting all the cleanup code we're now also setting a name
for the pool

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-7-daniel.vetter@ffwll.ch

drm/vboxvideo: use managed pci functions

Allows us to drop the cleanup code on the floor.

Sam noticed in his review:
> With this change we avoid calling pci_disable_device()
> twise in case vbox_mm_init() fails.
> Once in vbox_hw_fini() and once in the error path.

v2: Include Sam's review remarks

v3: Fix typo in commit summary (Thomas Zimmermann)

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-6-daniel.vetter@ffwll.ch

drm/vboxvideo: Stop using drm_device->dev_private

We use the baseclass pattern here, so lets to the proper (and more
typesafe) upcasting.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-5-daniel.vetter@ffwll.ch