i2c: brcmstb: Fix brcmstd_send_i2c_cmd condition

The brcmstb_send_i2c_cmd currently has a condition that is (CMD_RD ||
CMD_WR) which always evaluates to true, while the obvious fix is to test
whether the cmd variable passed as parameter holds one of these two
values.

Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'pwm/for-5.12-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The ZTE ZX platform is being removed, so the PWM driver is no longer
  needed and removed as well.

  Other than that this contains a small set of fixes and cleanups across
  a couple of drivers"

* tag 'pwm/for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: lpc18xx-sct: remove unneeded semicolon
  pwm: iqs620a: Correct a stale state variable
  pwm: iqs620a: Fix overflow and optimize calculations
  pwm: rockchip: Enable clock before calling clk_get_rate()
  pwm: rockchip: Eliminate potential race condition when probing
  pwm: rockchip: Replace "bus clk" with "PWM clk"
  pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare()
  pwm: rockchip: Enable APB clock during register access while probing
  pwm: Remove ZTE ZX driver

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:

 - new vdpa features to allow creation and deletion of new devices

 - virtio-blk support per-device queue depth

 - fixes, cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (31 commits)
  virtio-input: add multi-touch support
  virtio_mmio: fix one typo
  vdpa/mlx5: fix param validation in mlx5_vdpa_get_config()
  virtio_net: Fix fall-through warnings for Clang
  virtio_input: Prevent EV_MSC/MSC_TIMESTAMP loop storm for MT.
  virtio-blk: support per-device queue depth
  virtio_vdpa: don't warn when fail to disable vq
  virtio-pci: introduce modern device module
  virito-pci-modern: rename map_capability() to vp_modern_map_capability()
  virtio-pci-modern: introduce helper to get notification offset
  virtio-pci-modern: introduce helper for getting queue nums
  virtio-pci-modern: introduce helper for setting/geting queue size
  virtio-pci-modern: introduce helper to set/get queue_enable
  virtio-pci-modern: introduce vp_modern_queue_address()
  virtio-pci-modern: introduce vp_modern_set_queue_vector()
  virtio-pci-modern: introduce vp_modern_generation()
  virtio-pci-modern: introduce helpers for setting and getting features
  virtio-pci-modern: introduce helpers for setting and getting status
  virtio-pci-modern: introduce helper to set config vector
  virtio-pci-modern: introduce vp_modern_remove()
  ...

Merge tag 'mips_5.12_1' of git://git./linux/kernel/git/mips/linux

Pull more MIPS updates from Thomas Bogendoerfer:

 - added n64 block driver

 - fix for ubsan warnings

 - fix for bcm63xx platform

 - update of linux-mips mailinglist

* tag 'mips_5.12_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  arch: mips: update references to current linux-mips list
  mips: bmips: init clocks earlier
  vmlinux.lds.h: catch even more instrumentation symbols into .data
  n64: store dev instance into disk private data
  n64: cleanup n64cart_probe()
  n64: cosmetics changes
  n64: remove curly brackets
  n64: use sector SECTOR_SHIFT instead 512
  n64: use enums for reg
  n64: move module param at the top
  n64: move module info at the end
  n64: use pr_fmt to avoid duplicate string
  block: Add n64 cart driver

Merge tag 'drm-next-2021-02-26' of git://anongit.freedesktop.org/drm/drm

Pull more drm updates from Dave Airlie:
 "This is mostly fixes but I missed msm-next pull last week. It's been
  in drm-next.

  Otherwise it's a selection of i915, amdgpu and misc fixes, one TTM
  memory leak, nothing really major stands out otherwise.

  core:
   - vblank fence timing improvements

  dma-buf:
   - improve error handling

  ttm:
   - memory leak fix

  msm:
   - a6xx speedbin support
   - a508, a509, a512 support
   - various a5xx fixes
   - various dpu fixes
   - qseed3lite support for sm8250
   - dsi fix for msm8994
   - mdp5 fix for framerate bug with cmd mode panels
   - a6xx GMU OOB race fixes that were showing up in CI
   - various addition and removal of semicolons
   - gem submit fix for legacy userspace relocs path

  amdgpu:
   - clang warning fix
   - S0ix platform shutdown/poweroff fix
   - misc display fixes

  i915:
   - color format fix
   - -Wuninitialised reenabled
   - GVT ww locking, cmd parser fixes

  atyfb:
   - fix build

  rockchip:
   - AFBC modifier fix"

* tag 'drm-next-2021-02-26' of git://anongit.freedesktop.org/drm/drm: (60 commits)
  drm/panel: kd35t133: allow using non-continuous dsi clock
  drm/rockchip: Require the YTR modifier for AFBC
  drm/ttm: Fix a memory leak
  drm/drm_vblank: set the dma-fence timestamp during send_vblank_event
  dma-fence: allow signaling drivers to set fence timestamp
  dma-buf: heaps: Rework heap allocation hooks to return struct dma_buf instead of fd
  dma-buf: system_heap: Make sure to return an error if we abort
  drm/amd/display: Fix system hang after multiple hotplugs (v3)
  drm/amdgpu: fix shutdown and poweroff process failed with s0ix
  drm/i915: Nuke INTEL_OUTPUT_FORMAT_INVALID
  drm/i915: Enable -Wuninitialized
  drm/amd/display: Remove Assert from dcn10_get_dig_frontend
  drm/amd/display: Add vupdate_no_lock interrupts for DCN2.1
  Revert "drm/amd/display: reuse current context instead of recreating one"
  drm/amd/pm/swsmu: Avoid using structure_size uninitialized in smu_cmn_init_soft_gpu_metrics
  fbdev: atyfb: add stubs for aty_{ld,st}_lcd()
  drm/i915/gvt: Introduce per object locking in GVT scheduler.
  drm/i915/gvt: Purge dev_priv->gt
  drm/i915/gvt: Parse default state to update reg whitelist
  dt-bindings: dp-connector: Drop maxItems from -supply
  ...

Merge tag 'net-5.12-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Rather small batch this time.

  Current release - regressions:

   - bcm63xx_enet: fix sporadic kernel panic due to queue length
     mis-accounting

  Current release - new code bugs:

   - bcm4908_enet: fix RX path possible mem leak

   - bcm4908_enet: fix NAPI poll returned value

   - stmmac: fix missing spin_lock_init in visconti_eth_dwmac_probe()

   - sched: cls_flower: validate ct_state for invalid and reply flags

  Previous releases - regressions:

   - net: introduce CAN specific pointer in the struct net_device to
     prevent mis-interpreting memory

   - phy: micrel: set soft_reset callback to genphy_soft_reset for
     KSZ8081

   - psample: fix netlink skb length with tunnel info

  Previous releases - always broken:

   - icmp: pass zeroed opts from icmp{,v6}_ndo_send before sending

   - wireguard: device: do not generate ICMP for non-IP packets

   - mptcp: provide subflow aware release function to avoid a mem leak

   - hsr: add support for EntryForgetTime

   - r8169: fix jumbo packet handling on RTL8168e

   - octeontx2-af: fix an off by one in rvu_dbg_qsize_write()

   - i40e: fix flow for IPv6 next header (extension header)

   - phy: icplus: call phy_restore_page() when phy_select_page() fails

   - dpaa_eth: fix the access method for the dpaa_napi_portal"

* tag 'net-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
  r8169: fix jumbo packet handling on RTL8168e
  net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081
  net: psample: Fix netlink skb length with tunnel info
  net: broadcom: bcm4908_enet: fix NAPI poll returned value
  net: broadcom: bcm4908_enet: fix RX path possible mem leak
  net: hsr: add support for EntryForgetTime
  net: dsa: sja1105: Remove unneeded cast in sja1105_crc32()
  ibmvnic: fix a race between open and reset
  net: stmmac: Fix missing spin_lock_init in visconti_eth_dwmac_probe()
  net: introduce CAN specific pointer in the struct net_device
  net: usb: qmi_wwan: support ZTE P685M modem
  wireguard: kconfig: use arm chacha even with no neon
  wireguard: queueing: get rid of per-peer ring buffers
  wireguard: device: do not generate ICMP for non-IP packets
  wireguard: peer: put frequently used members above cache lines
  wireguard: selftests: test multiple parallel streams
  wireguard: socket: remove bogus __be32 annotation
  wireguard: avoid double unlikely() notation when using IS_ERR()
  net: qrtr: Fix memory leak in qrtr_tun_open
  vxlan: move debug check after netdev unregister
  ...

Merge tag 'acpi-5.12-rc1-3' of git://git./linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "These make additional changes to the platform profile interface merged
  recently and add support for the FPDT ACPI table.

  Specifics:

   - Rearrange Kconfig handling of ACPI_PLATFORM_PROFILE, add
     "balanced-performance" to the list of supported platform profiles
     and fix up some file references in a comment (Maximilian Luz).

   - Add support for parsing the ACPI Firmware Performance Data Table
     (FPDT) and exposing the data from there via sysfs (Zhang Rui)"

* tag 'acpi-5.12-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: platform: Add balanced-performance platform profile
  ACPI: platform: Fix file references in comment
  ACPI: platform: Hide ACPI_PLATFORM_PROFILE option
  ACPI: tables: introduce support for FPDT table

Merge tag 'drm-intel-next-fixes-2021-02-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

A fix for color format check from Ville, plus the re-enable of -Wuninitialized
from Nathan, and the GVT fixes including fixes for ww locking, cmd parser and
a general cleanup of dev_priv->gt.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YDe3pBPV5Kx3hpk6@intel.com

Merge tag 'amd-drm-fixes-5.12-2021-02-24' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-5.12-2021-02-24:

amdgpu:
- Clang warning fix
- S0ix platform shutdown/poweroff fix
- Misc display fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210225043853.3880-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2021-02-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next tasty fixes for v5.12:
- Cherry pick of drm-misc-fixes pull:
"here's this week's PR for drm-misc-fixes. One of the patches is a memory
leak; the rest is for hardware issues."
- Fix dt bindings for dp connector.
- Fix build error in atyfb.
- Improve error handling for dma-buf heaps.
- Make vblank timestamp more correct, by recording timestamp to be set when signaling.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0f60a68c-d562-7266-0815-ea75ff680b17@linux.intel.com

Merge tag 'kbuild-v5.12' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Fix false-positive build warnings for ARCH=ia64 builds

 - Optimize dictionary size for module compression with xz

 - Check the compiler and linker versions in Kconfig

 - Fix misuse of extra-y

 - Support DWARF v5 debug info

 - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
   exceeded the limit

 - Add generic syscall{tbl,hdr}.sh for cleanups across arches

 - Minor cleanups of genksyms

 - Minor cleanups of Kconfig

* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
  initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
  kbuild: remove deprecated 'always' and 'hostprogs-y/m'
  kbuild: parse C= and M= before changing the working directory
  kbuild: reuse this-makefile to define abs_srctree
  kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
  kconfig: omit --oldaskconfig option for 'make config'
  kconfig: fix 'invalid option' for help option
  kconfig: remove dead code in conf_askvalue()
  kconfig: clean up nested if-conditionals in check_conf()
  kconfig: Remove duplicate call to sym_get_string_value()
  Makefile: Remove # characters from compiler string
  Makefile: reuse CC_VERSION_TEXT
  kbuild: check the minimum linker version in Kconfig
  kbuild: remove ld-version macro
  scripts: add generic syscallhdr.sh
  scripts: add generic syscalltbl.sh
  arch: syscalls: remove $(srctree)/ prefix from syscall tables
  arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
  gen_compile_commands: prune some directories
  kbuild: simplify access to the kernel's version
  ...

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Miscellaneous ext4 cleanups and bug fixes. Pretty boring this cycle..."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: add .kunitconfig fragment to enable ext4-specific tests
  ext: EXT4_KUNIT_TESTS should depend on EXT4_FS instead of selecting it
  ext4: reset retry counter when ext4_alloc_file_blocks() makes progress
  ext4: fix potential htree index checksum corruption
  ext4: factor out htree rep invariant check
  ext4: Change list_for_each* to list_for_each_entry*
  ext4: don't try to processed freed blocks until mballoc is initialized
  ext4: use DEFINE_MUTEX() for mutex lock

Merge branch 'acpi-tables'

* acpi-tables:
  ACPI: tables: introduce support for FPDT table

Merge tag 'pci-v5.12-changes' of git://git./linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Remove unnecessary locking around _OSC (Bjorn Helgaas)
   - Clarify message about _OSC failure (Bjorn Helgaas)
   - Remove notification of PCIe bandwidth changes (Bjorn Helgaas)
   - Tidy checking of syscall user config accessors (Heiner Kallweit)

  Resource management:
   - Decline to resize resources if boot config must be preserved (Ard
     Biesheuvel)
   - Fix pci_register_io_range() memory leak (Geert Uytterhoeven)

  Error handling (Keith Busch):
   - Clear error status from the correct device
   - Retain error recovery status so drivers can use it after reset
   - Log the type of Port (Root or Switch Downstream) that we reset
   - Always request a reset for Downstream Ports in frozen state

  Endpoint framework and NTB (Kishon Vijay Abraham I):
   - Make *_get_first_free_bar() take into account 64 bit BAR
   - Add helper API to get the 'next' unreserved BAR
   - Make *_free_bar() return error codes on failure
   - Remove unused pci_epf_match_device()
   - Add support to associate secondary EPC with EPF
   - Add support in configfs to associate two EPCs with EPF
   - Add pci_epc_ops to map MSI IRQ
   - Add pci_epf_ops to expose function-specific attrs
   - Allow user to create sub-directory of 'EPF Device' directory
   - Implement ->msi_map_irq() ops for cadence
   - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence
   - Add EP function driver to provide NTB functionality
   - Add support for EPF PCI Non-Transparent Bridge
   - Add specification for PCI NTB function device
   - Add PCI endpoint NTB function user guide
   - Add configfs binding documentation for pci-ntb endpoint function

  Broadcom STB PCIe controller driver:
   - Add support for BCM4908 and external PERST# signal controller
     (Rafał Miłecki)

  Cadence PCIe controller driver:
   - Retrain Link to work around Gen2 training defect (Nadeem Athani)
   - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof
     Wilczyński)

  Freescale Layerscape PCIe controller driver:
   - Add LX2160A rev2 EP mode support (Hou Zhiqiang)
   - Convert to builtin_platform_driver() (Michael Walle)

  MediaTek PCIe controller driver:
   - Fix OF node reference leak (Krzysztof Wilczyński)

  Microchip PolarFlare PCIe controller driver:
   - Add Microchip PolarFire PCIe controller driver (Daire McNamara)

  Qualcomm PCIe controller driver:
   - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith)
   - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov)

  Renesas R-Car PCIe controller driver:
   - Drop PCIE_RCAR config option (Lad Prabhakar)
   - Always allocate MSI addresses in 32bit space (Marek Vasut)

  Rockchip PCIe controller driver:
   - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai)
   - Make 'ep-gpios' DT property optional (Chen-Yu Tsai)

  Synopsys DesignWare PCIe controller driver:
   - Work around ECRC configuration hardware defect (Vidya Sagar)
   - Drop support for config space in DT 'ranges' (Rob Herring)
   - Change size to u64 for EP outbound iATU (Shradha Todi)
   - Add upper limit address for outbound iATU (Shradha Todi)
   - Make dw_pcie ops optional (Jisheng Zhang)
   - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang)

  Xilinx Versal CPM PCIe controller driver:
   - Fix OF node reference leak (Pan Bian)

  Miscellaneous:
   - Remove tango host controller driver (Arnd Bergmann)
   - Remove IRQ handler & data together (altera-msi, brcmstb, dwc)
     (Martin Kaiser)
   - Fix xgene-msi race in installing chained IRQ handler (Martin
     Kaiser)
   - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He)
   - Fix pci-bridge-emul array overruns (Russell King)
   - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej
     Siewior)"

* tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits)
  PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
  PCI: qcom: Add support for ddrss_sf_tbu clock
  dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
  PCI: al: Remove useless dw_pcie_ops
  PCI: dwc: Don't assume the ops in dw_pcie always exist
  PCI: dwc: Add upper limit address for outbound iATU
  PCI: dwc: Change size to u64 for EP outbound iATU
  PCI: dwc: Drop support for config space in 'ranges'
  PCI: layerscape: Convert to builtin_platform_driver()
  PCI: layerscape: Add LX2160A rev2 EP mode support
  dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
  PCI: dwc: Work around ECRC configuration issue
  PCI/portdrv: Report reset for frozen channel
  PCI/AER: Specify the type of Port that was reset
  PCI/ERR: Retain status from error notification
  PCI/AER: Clear AER status from Root Port when resetting Downstream Port
  PCI/ERR: Clear status of the reporting device
  dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
  PCI: rockchip: Make 'ep-gpios' DT property optional
  Documentation: PCI: Add PCI endpoint NTB function user guide
  ...

r8169: fix jumbo packet handling on RTL8168e

Josef reported [0] that using jumbo packets fails on RTL8168e.
Aligning the values for register MaxTxPacketSize with the
vendor driver fixes the problem.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=211827

Fixes: d58d46b5d851 ("r8169: jumbo fixes.")
Reported-by: Josef Oškera <joskera@redhat.com>
Tested-by: Josef Oškera <joskera@redhat.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/b15ddef7-0d50-4320-18f4-6a3f86fbfd3e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081

Following a similar reinstate for the KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.

Bluntly removing that default may expose a lot of situations where various
PHYs/board implementations won't recover on various changes.
Like with this implementation during a 4.9.x to 5.4.x LTS transition.
I think it's a good thing to remove unwanted soft resets but wonder if it
did open a can of worms?

Atleast this fixes one iMX6 FEC/RMII/8081 combo.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Christian Melki <christian.melki@t2data.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224205536.9349-1-christian.melki@t2data.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'nds32-for-linux-5.12' of git://git./linux/kernel/git/greentime/linux

Pull nds32 updates from Greentime Hu:
 "Code clean-up and refinement"

* tag 'nds32-for-linux-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
  nds32: Fix bogus reference to <asm/procinfo.h>
  nds32: use get_kernel_nofault in dump_mem
  nds32: remove dump_instr
  nds32: configs: Cleanup CONFIG_CROSS_COMPILE
  nds32: Replace <linux/clk-provider.h> by <linux/of_clk.h>

net: psample: Fix netlink skb length with tunnel info

Currently, the psample netlink skb is allocated with a size that does
not account for the nested 'PSAMPLE_ATTR_TUNNEL' attribute and the
padding required for the 64-bit attribute 'PSAMPLE_TUNNEL_KEY_ATTR_ID'.
This can result in failure to add attributes to the netlink skb due
to insufficient tail room. The following error message is printed to
the kernel log: "Could not create psample log message".

Fix this by adjusting the allocation size to take into account the
nested attribute and the padding.

Fixes: d8bed686ab96 ("net: psample: Add tunnel support")
CC: Yotam Gigi <yotam.gi@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Link: https://lore.kernel.org/r/20210225075145.184314-1-cmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: broadcom: bcm4908_enet: fix NAPI poll returned value

Missing increment was resulting in poll function always returning 0
instead of amount of processed packets.

Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210224151842.2419-2-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: broadcom: bcm4908_enet: fix RX path possible mem leak

After filling RX ring slot with new skb it's required to free old skb.
Immediately on error or later in the net subsystem.

Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210224151842.2419-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: hsr: add support for EntryForgetTime

In IEC 62439-3 EntryForgetTime is defined with a value of 400 ms. When a
node does not send any frame within this time, the sequence number check
for can be ignored. This solves communication issues with Cisco IE 2000
in Redbox mode.

Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Marco Wenzel <marco.wenzel@a-eberle.de>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224094653.1440-1-marco.wenzel@a-eberle.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: dsa: sja1105: Remove unneeded cast in sja1105_crc32()

sja1105_unpack() takes a "const void *buf" as its first parameter, so
there is no need to cast away the "const" of the "buf" variable before
calling it.

Drop the cast, as it prevents the compiler performing some checks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20210223112003.2223332-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drm/panel: kd35t133: allow using non-continuous dsi clock

The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.

Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.

Also the flag actually becomes necessary after
commit c6d94e37bdbb ("drm/bridge/synopsys: dsi: add support for non-continuous HS clock")
and without it the panel only emits stripes instead of output.

Fixes: c6d94e37bdbb ("drm/bridge/synopsys: dsi: add support for non-continuous HS clock")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Christopher Morgan <macromorgan@hotmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210206135020.1991820-1-heiko@sntech.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/rockchip: Require the YTR modifier for AFBC

The AFBC decoder used in the Rockchip VOP assumes the use of the
YUV-like colourspace transform (YTR). YTR is lossless for RGB(A)
buffers, which covers the RGBA8 and RGB565 formats supported in
vop_convert_afbc_format. Use of YTR is signaled with the
AFBC_FORMAT_MOD_YTR modifier, which prior to this commit was missing. As
such, a producer would have to generate buffers that do not use YTR,
which the VOP would erroneously decode as YTR, leading to severe visual
corruption.

The upstream AFBC support was developed against a captured frame, which
failed to exercise modifier support. Prior to bring-up of AFBC in Mesa
(in the Panfrost driver), no open userspace respected modifier
reporting. As such, this change is not expected to affect broken
userspaces.

Tested on RK3399 with Panfrost and Weston.

Fixes: 7707f7227f09 ("drm/rockchip: Add support for afbc")
Cc: stable@vger.kernel.org
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200811202631.3603-1-alyssa.rosenzweig@collabora.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/ttm: Fix a memory leak

Free the memory on failure.
Also no need to re-alloc memory on retry.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219042547.44855-1-xinhui.pan@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org # 5.11
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

nds32: Fix bogus reference to <asm/procinfo.h>

Andestech(nds32) never had <asm/procinfo.h>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>

nds32: use get_kernel_nofault in dump_mem

Use the proper get_kernel_nofault helper to access an unsafe kernel
pointer without faulting instead of playing with set_fs and get_user.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Nick Hu <nickhu@andestech.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>

nds32: remove dump_instr

dump_inst has a return before actually doing anything, so just drop the
whole thing.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Nick Hu <nickhu@andestech.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>

nds32: configs: Cleanup CONFIG_CROSS_COMPILE

CONFIG_CROSS_COMPILE is gone since commit f1089c92da79 ("kbuild: remove
CONFIG_CROSS_COMPILE support").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>

nds32: Replace <linux/clk-provider.h> by <linux/of_clk.h>

The Andes platform code is not a clock provider, and just needs to call
of_clk_init().

Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greentime Hu <green.hu@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greentime Hu <green.hu@gmail.com>

Merge tag 'x86-entry-2021-02-24' of git://git./linux/kernel/git/tip/tip

Pull x86 irq entry updates from Thomas Gleixner:
 "The irq stack switching was moved out of the ASM entry code in course
  of the entry code consolidation. It ended up being suboptimal in
  various ways.

  This reworks the X86 irq stack handling:

   - Make the stack switching inline so the stackpointer manipulation is
     not longer at an easy to find place.

   - Get rid of the unnecessary indirect call.

   - Avoid the double stack switching in interrupt return and reuse the
     interrupt stack for softirq handling.

   - A objtool fix for CONFIG_FRAME_POINTER=y builds where it got
     confused about the stack pointer manipulation"

* tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix stack-swizzle for FRAME_POINTER=y
  um: Enforce the usage of asm-generic/softirq_stack.h
  x86/softirq/64: Inline do_softirq_own_stack()
  softirq: Move do_softirq_own_stack() to generic asm header
  softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig
  x86: Select CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
  x86/softirq: Remove indirection in do_softirq_own_stack()
  x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall
  x86/entry: Convert device interrupts to inline stack switching
  x86/entry: Convert system vectors to irq stack macro
  x86/irq: Provide macro for inlining irq stack switching
  x86/apic: Split out spurious handling code
  x86/irq/64: Adjust the per CPU irq stack pointer by 8
  x86/irq: Sanitize irq stack tracking
  x86/entry: Fix instrumentation annotation

Merge branch 'akpm' (patches from Andrew)

Merge misc updates from Andrew Morton:
 "A few small subsystems and some of MM.

  172 patches.

  Subsystems affected by this patch series: hexagon, scripts, ntfs,
  ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap,
  memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan,
  pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
  mempolicy, oom-kill, hugetlbfs, and migration)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits)
  mm/migrate: remove unneeded semicolons
  hugetlbfs: remove unneeded return value of hugetlb_vmtruncate()
  hugetlbfs: fix some comment typos
  hugetlbfs: correct some obsolete comments about inode i_mutex
  hugetlbfs: make hugepage size conversion more readable
  hugetlbfs: remove meaningless variable avoid_reserve
  hugetlbfs: correct obsolete function name in hugetlbfs_read_iter()
  hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs
  hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr()
  hugetlbfs: remove special hugetlbfs_set_page_dirty()
  mm/hugetlb: change hugetlb_reserve_pages() to type bool
  mm, oom: fix a comment in dump_task()
  mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk()
  numa balancing: migrate on fault among multiple bound nodes
  mm, compaction: make fast_isolate_freepages() stay within zone
  mm/compaction: fix misbehaviors of fast_find_migrateblock()
  mm/compaction: correct deferral logic for proactive compaction
  mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked
  mm/compaction: remove rcu_read_lock during page compaction
  z3fold: simplify the zhdr initialization code in init_z3fold_page()
  ...

ibmvnic: fix a race between open and reset

__ibmvnic_reset() currently reads the adapter->state before getting the
rtnl and saves that state as the "target state" for the reset. If this
read occurs when adapter is in PROBED state, the target state would be
PROBED.

Just after the target state is saved, and before the actual reset process
is started (i.e before rtnl is acquired) if we get an ibmvnic_open() call
we would move the adapter to OPEN state.

But when the reset is processed (after ibmvnic_open()) drops the rtnl),
it will leave the adapter in PROBED state even though we already moved
it to OPEN.

To fix this, use the RTNL to improve serialization when reading/updating
the adapter state. i.e determine the target state of a reset only after
getting the RTNL. And if a reset is in progress during an open, simply
set the target state of the adapter and let the reset code finish the
open (like we currently do if failover is pending).

One twist to this serialization is if the adapter state changes when we
drop the RTNL to update the link state. Account for this by checking if
there was an intervening open and update the target state for the reset
accordingly (see new comments in the code). Note that only the reset
functions and ibmvnic_open() can set the adapter to OPEN state and this
must happen under rtnl.

Fixes: 7d7195a026ba ("ibmvnic: Do not process device remove during device reset")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Link: https://lore.kernel.org/r/20210224050229.1155468-1-sukadev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: stmmac: Fix missing spin_lock_init in visconti_eth_dwmac_probe()

The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.

Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20210223104803.4047281-1-weiyongjun1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'drm-msm-next-2021-02-07' of https://gitlab.freedesktop.org/drm/msm into drm-next

* a6xx speedbin support
* a508, a509, a512 support
* various a5xx fixes
* various dpu fixes
* qseed3lite support for sm8250
* dsi fix for msm8994
* mdp5 fix for framerate bug with cmd mode panels
* a6xx GMU OOB race fixes that were showing up in CI
* various addition and removal of semicolons
* gem submit fix for legacy userspace relocs path

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvh3tvLz_xtk=4x9xUfo2h2s4xkniOvC7HyLO2jrXnXkw@mail.gmail.com

net: introduce CAN specific pointer in the struct net_device

Since 20dd3850bcf8 ("can: Speed up CAN frame receiption by using
ml_priv") the CAN framework uses per device specific data in the AF_CAN
protocol. For this purpose the struct net_device->ml_priv is used. Later
the ml_priv usage in CAN was extended for other users, one of them being
CAN_J1939.

Later in the kernel ml_priv was converted to an union, used by other
drivers. E.g. the tun driver started storing it's stats pointer.

Since tun devices can claim to be a CAN device, CAN specific protocols
will wrongly interpret this pointer, which will cause system crashes.
Mostly this issue is visible in the CAN_J1939 stack.

To fix this issue, we request a dedicated CAN pointer within the
net_device struct.

Reported-by: syzbot+5138c4dd15a0401bec7b@syzkaller.appspotmail.com
Fixes: 20dd3850bcf8 ("can: Speed up CAN frame receiption by using ml_priv")
Fixes: ffd956eef69b ("can: introduce CAN midlayer private and allocate it automatically")
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Fixes: 497a5757ce4e ("tun: switch to net core provided statistics counters")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210223070127.4538-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

mm/migrate: remove unneeded semicolons

Remove superfluous semicolons after function definitions.

Link: https://lkml.kernel.org/r/20210115110131.2359683-1-cy.fan@huawei.com
Signed-off-by: Chengyang Fan <cy.fan@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: remove unneeded return value of hugetlb_vmtruncate()

The function hugetlb_vmtruncate() is guaranteed to always success since
commit 7aa91e104028 ("hugetlb: allow extending ftruncate on hugetlbfs").
So we should remove the unneeded return value which is always 0.

Link: https://lkml.kernel.org/r/20210208084637.47789-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: fix some comment typos

Fix typos reserv to reserve, minimim to minimum. No functional change
intended.

Link: https://lkml.kernel.org/r/20210130092351.28072-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: correct some obsolete comments about inode i_mutex

Since commit 9902af79c01a ("parallel lookups: actual switch to rwsem"),
i_mutex of inode is converted to i_rwsem. So replace i_mutex with i_rwsem
to make comments up to date.

Link: https://lkml.kernel.org/r/20210127093111.36672-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: make hugepage size conversion more readable

The calculation 1U << (h->order + PAGE_SHIFT - 10) is actually equal to
(PAGE_SHIFT << (h->order)) >> 10.  So we can make it more readable by
replace it with huge_page_size(h) >> 10.

Link: https://lkml.kernel.org/r/20210122083141.24548-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: remove meaningless variable avoid_reserve

The variable avoid_reserve is meaningless because we never changed its
value and just passed it to alloc_huge_page().  So remove it to make code
more clear that in hugetlbfs_fallocate, we never avoid reserve when alloc
hugepage yet.  Also add a comment offered by Mike Kravetz to explain this.

Link: https://lkml.kernel.org/r/20210120071508.9078-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: correct obsolete function name in hugetlbfs_read_iter()

Since commit 36e789144267 ("kill do_generic_mapping_read"), the function
do_generic_mapping_read() is renamed to do_generic_file_read(). And then
commit 47c27bc46946 ("fs: pass iocb to do_generic_file_read") renamed it
to generic_file_buffered_read(). So replace do_generic_mapping_read() with
generic_file_buffered_read() to keep comment uptodate.

Link: https://lkml.kernel.org/r/20210118063210.47118-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs

Since commit e5ff215941d5 ("hugetlb: multiple hstates for multiple page
sizes"), we can use macro default_hstate to get the struct hstate which we
use by default.  But init_hugetlbfs_fs() forgot to use it.

Link: https://lkml.kernel.org/r/20210116091827.20982-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr()

When we reach here with inode = NULL, we should have crashed as inode has
already been dereferenced via hstate_inode.  So this BUG_ON(!inode) does
not take effect and should be removed.

Link: https://lkml.kernel.org/r/20210118110700.52506-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlbfs: remove special hugetlbfs_set_page_dirty()

Matthew Wilcox noticed that hugetlbfs_set_page_dirty always returns 0.
Instead, it should return 1 or 0 depending on the previous state of the
dirty bit.  In addition, the call to compound_head is redundant as it is
also performed in calling routine set_page_dirty.

Replace the hugetlbfs specific routine hugetlbfs_set_page_dirty with
__set_page_dirty_no_writeback as it addresses both of these issues.

Link: https://lkml.kernel.org/r/20201221192542.15732-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: change hugetlb_reserve_pages() to type bool

While reviewing a bug in hugetlb_reserve_pages, it was noticed that all
callers ignore the return value.  Any failure is considered an ENOMEM
error by the callers.

Change the function to be of type bool.  The function will return true if
the reservation was successful, false otherwise.  Callers currently assume
a zero return code indicates success.  Change the callers to look for true
to indicate success.  No functional change, only code cleanup.

Link: https://lkml.kernel.org/r/20201221192542.15732-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, oom: fix a comment in dump_task()

If p is a kthread, it will be checked in oom_unkillable_task() so
we can delete the corresponding comment.

Link: https://lkml.kernel.org/r/20210125133006.7242-1-tangyizhou@huawei.com
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk()

The helper range_in_vma() is introduced via commit 017b1660df89 ("mm:
migration: fix migration of huge PMD shared pages"). But we forgot to
use it in queue_pages_test_walk().

Link: https://lkml.kernel.org/r/20210130091352.20220-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

numa balancing: migrate on fault among multiple bound nodes

Now, NUMA balancing can only optimize the page placement among the NUMA
nodes if the default memory policy is used.  Because the memory policy
specified explicitly should take precedence.  But this seems too strict in
some situations.  For example, on a system with 4 NUMA nodes, if the
memory of an application is bound to the node 0 and 1, NUMA balancing can
potentially migrate the pages between the node 0 and 1 to reduce
cross-node accessing without breaking the explicit memory binding policy.

So in this patch, we add MPOL_F_NUMA_BALANCING mode flag to
set_mempolicy() when mode is MPOL_BIND.  With the flag specified, NUMA
balancing will be enabled within the thread to optimize the page placement
within the constrains of the specified memory binding policy.  With the
newly added flag, the NUMA balancing control mechanism becomes,

 - sysctl knob numa_balancing can enable/disable the NUMA balancing
   globally.

 - even if sysctl numa_balancing is enabled, the NUMA balancing will be
   disabled for the memory areas or applications with the explicit
   memory policy by default.

 - MPOL_F_NUMA_BALANCING can be used to enable the NUMA balancing for
   the applications when specifying the explicit memory policy
   (MPOL_BIND).

Various page placement optimization based on the NUMA balancing can be
done with these flags.  As the first step, in this patch, if the memory of
the application is bound to multiple nodes (MPOL_BIND), and in the hint
page fault handler the accessing node are in the policy nodemask, the page
will be tried to be migrated to the accessing node to reduce the
cross-node accessing.

If the newly added MPOL_F_NUMA_BALANCING flag is specified by an
application on an old kernel version without its support, set_mempolicy()
will return -1 and errno will be set to EINVAL.  The application can use
this behavior to run on both old and new kernel versions.

And if the MPOL_F_NUMA_BALANCING flag is specified for the mode other than
MPOL_BIND, set_mempolicy() will return -1 and errno will be set to EINVAL
as before.  Because we don't support optimization based on the NUMA
balancing for these modes.

In the previous version of the patch, we tried to reuse MPOL_MF_LAZY for
mbind().  But that flag is tied to MPOL_MF_MOVE.*, so it seems not a good
API/ABI for the purpose of the patch.

And because it's not clear whether it's necessary to enable NUMA balancing
for a specific memory area inside an application, so we only add the flag
at the thread level (set_mempolicy()) instead of the memory area level
(mbind()).  We can do that when it become necessary.

To test the patch, we run a test case as follows on a 4-node machine with
192 GB memory (48 GB per node).

1. Change pmbench memory accessing benchmark to call set_mempolicy()
   to bind its memory to node 1 and 3 and enable NUMA balancing.  Some
   related code snippets are as follows,

     #include <numaif.h>
     #include <numa.h>

struct bitmask *bmp;
int ret;

bmp = numa_parse_nodestring("1,3");
ret = set_mempolicy(MPOL_BIND | MPOL_F_NUMA_BALANCING,
    bmp->maskp, bmp->size + 1);
/* If MPOL_F_NUMA_BALANCING isn't supported, fall back to MPOL_BIND */
if (ret < 0 && errno == EINVAL)
ret = set_mempolicy(MPOL_BIND, bmp->maskp, bmp->size + 1);
if (ret < 0) {
perror("Failed to call set_mempolicy");
exit(-1);
}

2. Run a memory eater on node 3 to use 40 GB memory before running pmbench.

3. Run pmbench with 64 processes, the working-set size of each process
   is 640 MB, so the total working-set size is 64 * 640 MB = 40 GB.  The
   CPU and the memory (as in step 1.) of all pmbench processes is bound
   to node 1 and 3. So, after CPU usage is balanced, some pmbench
   processes run on the CPUs of the node 3 will access the memory of
   the node 1.

4. After the pmbench processes run for 100 seconds, kill the memory
   eater.  Now it's possible for some pmbench processes to migrate
   their pages from node 1 to node 3 to reduce cross-node accessing.

Test results show that, with the patch, the pages can be migrated from
node 1 to node 3 after killing the memory eater, and the pmbench score
can increase about 17.5%.

Link: https://lkml.kernel.org/r/20210120061235.148637-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, compaction: make fast_isolate_freepages() stay within zone

Compaction always operates on pages from a single given zone when
isolating both pages to migrate and freepages.  Pageblock boundaries are
intersected with zone boundaries to be safe in case zone starts or ends in
the middle of pageblock.  The use of pageblock_pfn_to_page() protects
against non-contiguous pageblocks.

The functions fast_isolate_freepages() and fast_isolate_around() don't
currently protect the fast freepage isolation thoroughly enough against
these corner cases, and can result in freepage isolation operate outside
of zone boundaries:

 - in fast_isolate_freepages() if we get a pfn from the first pageblock
   of a zone that starts in the middle of that pageblock, 'highest' can
   be a pfn outside of the zone.

   If we fail to isolate anything in this function, we may then call
   fast_isolate_around() on a pfn outside of the zone and there
   effectively do a set_pageblock_skip(page_to_pfn(highest)) which may
   currently hit a VM_BUG_ON() in some configurations

 - fast_isolate_around() checks only the zone end boundary and not
   beginning, nor that the pageblock is contiguous (with
   pageblock_pfn_to_page()) so it's possible that we end up calling
   isolate_freepages_block() on a range of pfn's from two different
   zones and end up e.g. isolating freepages under the wrong zone's
   lock.

This patch should fix the above issues.

Link: https://lkml.kernel.org/r/20210217173300.6394-1-vbabka@suse.cz
Fixes: 5a811889de10 ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction: fix misbehaviors of fast_find_migrateblock()

In the fast_find_migrateblock(), it iterates ocer the freelist to find the
proper pageblock.  But there are some misbehaviors.

First, if the page we found is equal to cc->migrate_pfn, it is considered
that we didn't find a suitable pageblock.  Secondly, if the loop was
terminated because order is less than PAGE_ALLOC_COSTLY_ORDER, it could be
considered that we found a suitable one.  Thirdly, if the skip bit is set
on the page block and we goto continue, it doesn't check nr_scanned.
Fourthly, if the page block's skip bit is set, it checks that page block
is the last of list, which is unnecessary.

Link: https://lkml.kernel.org/r/20210128130411.6125-1-vvghjk1234@gmail.com
Fixes: 70b44595eafe9 ("mm, compaction: use free lists to quickly locate a migration source")
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction: correct deferral logic for proactive compaction

should_proactive_compact_node() returns true when sum of the weighted
fragmentation score of all the zones in the node is greater than the
wmark_high of compaction, which then triggers the proactive compaction
that operates on the individual zones of the node.  But proactive
compaction runs on the zone only when its weighted fragmentation score
is greater than wmark_low(=wmark_high - 10).

This means that the sum of the weighted fragmentation scores of all the
zones can exceed the wmark_high but individual weighted fragmentation zone
scores can still be less than wmark_low which makes the unnecessary
trigger of the proactive compaction only to return doing nothing.

Issue with the return of proactive compaction with out even trying is its
deferral.  It is simply deferred for 1 << COMPACT_MAX_DEFER_SHIFT if the
scores across the proactive compaction is same, thinking that compaction
didn't make any progress but in reality it didn't even try.  With the
delay between successive retries for proactive compaction is 500msec, it
can result into the deferral for ~30sec with out even trying the proactive
compaction.

Test scenario is that: compaction_proactiveness=50 thus the wmark_low = 50
and wmark_high = 60.  System have 2 zones(Normal and Movable) with sizes
5GB and 6GB respectively.  After opening some apps on the android, the
weighted fragmentation scores of these zones are 47 and 49 respectively.
Since the sum of these fragmentation scores are above the wmark_high which
triggers the proactive compaction and there since the individual zones
weighted fragmentation scores are below wmark_low, it returns without
trying the proactive compaction.  As a result the weighted fragmentation
scores of the zones are still 47 and 49 which makes the existing logic to
defer the compaction thinking that noprogress is made across the
compaction.

Fix this by checking just zone fragmentation score, not the weighted, in
__compact_finished() and use the zones weighted fragmentation score in
fragmentation_score_node().  In the test case above, If the weighted
average of is above wmark_high, then individual score (not adjusted) of
atleast one zone has to be above wmark_high.  Thus it avoids the
unnecessary trigger and deferrals of the proactive compaction.

Link: https://lkml.kernel.org/r/1610989938-31374-1-git-send-email-charante@codeaurora.org
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nitin Gupta <ngupta@nitingupta.dev>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked

The VM_BUG_ON_PAGE(!PageLocked(page), page) is also done in PageMovable.
Remove this explicitly one.

Link: https://lkml.kernel.org/r/20210109081420.46030-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction: remove rcu_read_lock during page compaction

isolate_migratepages_block() used rcu_read_lock() with the intention of
safeguarding against the mem_cgroup being destroyed concurrently; but
its TestClearPageLRU already protects against that.  Delete the
unnecessary rcu_read_lock() and _unlock().

Hugh Dickins helped on commit log polishing, Thanks!

Link: https://lkml.kernel.org/r/1608614453-10739-3-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

z3fold: simplify the zhdr initialization code in init_z3fold_page()

We can simplify the zhdr initialization by memset() the zhdr first
instead of set struct member to zero one by one.  This would also make
code more compact and clear.

Link: https://lkml.kernel.org/r/20210120085851.16159-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

z3fold: remove unused attribute for release_z3fold_page

Since commit dcf5aedb24f8 ("z3fold: stricter locking and more careful
reclaim"), release_z3fold_page() is used again.  So we can drop the
unused attribute safely.

Link: https://lkml.kernel.org/r/20210120084008.58432-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: restore zone_reclaim_mode ABI

I went to go add a new RECLAIM_* mode for the zone_reclaim_mode sysctl.
Like a good kernel developer, I also went to go update the
documentation.  I noticed that the bits in the documentation didn't
match the bits in the #defines.

The VM never explicitly checks the RECLAIM_ZONE bit.  The bit is,
however implicitly checked when checking 'node_reclaim_mode==0'.  The
RECLAIM_ZONE #define was removed in a cleanup.  That, by itself is fine.

But, when the bit was removed (bit 0) the _other_ bit locations also got
changed.  That's not OK because the bit values are documented to mean
one specific thing.  Users surely do not expect the meaning to change
from kernel to kernel.

The end result is that if someone had a script that did:

sysctl vm.zone_reclaim_mode=1

it would have gone from enabling node reclaim for clean unmapped pages
to writing out pages during node reclaim after the commit in question.
That's not great.

Put the bits back the way they were and add a comment so something like
this is a bit harder to do again.  Update the documentation to make it
clear that the first bit is ignored.

Link: https://lkml.kernel.org/r/20210219172555.FF0CDF23@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 648b5cf368e0 ("mm/vmscan: remove unused RECLAIM_OFF/RECLAIM_ZONE")
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: fix uninitialized subpool pointer

Gerald Schaefer reported a panic on s390 in hugepage_subpool_put_pages()
with linux-next 5.12.0-20210222.
Call trace:
  hugepage_subpool_put_pages.part.0+0x2c/0x138
  __free_huge_page+0xce/0x310
  alloc_pool_huge_page+0x102/0x120
  set_max_huge_pages+0x13e/0x350
  hugetlb_sysctl_handler_common+0xd8/0x110
  hugetlb_sysctl_handler+0x48/0x58
  proc_sys_call_handler+0x138/0x238
  new_sync_write+0x10e/0x198
  vfs_write.part.0+0x12c/0x238
  ksys_write+0x68/0xf8
  do_syscall+0x82/0xd0
  __do_syscall+0xb4/0xc8
  system_call+0x72/0x98

This is a result of the change which moved the hugetlb page subpool
pointer from page->private to page[1]->private.  When new pages are
allocated from the buddy allocator, the private field of the head
page will be cleared, but the private field of subpages is not modified.
Therefore, old values may remain.

Fix by initializing hugetlb page subpool pointer in prep_new_huge_page().

Link: https://lkml.kernel.org/r/20210223215544.313871-1-mike.kravetz@oracle.com
Fixes: f1280272ae4d ("hugetlb: use page.private for hugetlb specific page flags")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/hugetlb.h: add synchronization information for new hugetlb specific flags

Add comments, no functional change.

Link: https://lkml.kernel.org/r/62a80585-2a73-10cc-4a2d-5721540d4ad2@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: convert PageHugeFreed to HPageFreed flag

Use new hugetlb specific HPageFreed flag to replace the PageHugeFreed
interfaces.

Link: https://lkml.kernel.org/r/20210122195231.324857-6-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: convert PageHugeTemporary() to HPageTemporary flag

Use new hugetlb specific HPageTemporary flag to replace the
PageHugeTemporary() interfaces.  PageHugeTemporary does contain a
PageHuge() check.  However, this interface is only used within hugetlb
code where we know we are dealing with a hugetlb page.  Therefore, the
check can be eliminated.

Link: https://lkml.kernel.org/r/20210122195231.324857-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: convert page_huge_active() HPageMigratable flag

Use the new hugetlb page specific flag HPageMigratable to replace the
page_huge_active interfaces.  By it's name, page_huge_active implied that
a huge page was on the active list.  However, that is not really what code
checking the flag wanted to know.  It really wanted to determine if the
huge page could be migrated.  This happens when the page is actually added
to the page cache and/or task page table.  This is the reasoning behind
the name change.

The VM_BUG_ON_PAGE() calls in the *_huge_active() interfaces are not
really necessary as we KNOW the page is a hugetlb page.  Therefore, they
are removed.

The routine page_huge_active checked for PageHeadHuge before testing the
active bit.  This is unnecessary in the case where we hold a reference or
lock and know it is a hugetlb head page.  page_huge_active is also called
without holding a reference or lock (scan_movable_pages), and can race
with code freeing the page.  The extra check in page_huge_active shortened
the race window, but did not prevent the race.  Offline code calling
scan_movable_pages already deals with these races, so removing the check
is acceptable.  Add comment to racy code.

[songmuchun@bytedance.com: remove set_page_huge_active() declaration from include/linux/hugetlb.h]
Link: https://lkml.kernel.org/r/CAMZfGtUda+KoAZscU0718TN61cSFwp4zy=y2oZ=+6Z2TAZZwng@mail.gmail.com
Link: https://lkml.kernel.org/r/20210122195231.324857-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: use page.private for hugetlb specific page flags

Patch series "create hugetlb flags to consolidate state", v3.

While discussing a series of hugetlb fixes in [1], it became evident that
the hugetlb specific page state information is stored in a somewhat
haphazard manner.  Code dealing with state information would be easier to
read, understand and maintain if this information was stored in a
consistent manner.

This series uses page.private of the hugetlb head page for storing a set
of hugetlb specific page flags.  Routines are priovided for test, set and
clear of the flags.

[1] https://lore.kernel.org/r/20210106084739.63318-1-songmuchun@bytedance.com

This patch (of 4):

As hugetlbfs evolved, state information about hugetlb pages was added.
One 'convenient' way of doing this was to use available fields in tail
pages.  Over time, it has become difficult to know the meaning or contents
of fields simply by looking at a small bit of code.  Sometimes, the naming
is just confusing.  For example: The PagePrivate flag indicates a huge
page reservation was consumed and needs to be restored if an error is
encountered and the page is freed before it is instantiated.  The
page.private field contains the pointer to a subpool if the page is
associated with one.

In an effort to make the code more readable, use page.private to contain
hugetlb specific page flags.  These flags will have test, set and clear
functions similar to those used for 'normal' page flags.  More
importantly, an enum of flag values will be created with names that
actually reflect their purpose.

In this patch,
- Create infrastructure for hugetlb specific page flag functions
- Move subpool pointer to page[1].private to make way for flags
  Create routines with meaningful names to modify subpool field
- Use new HPageRestoreReserve flag instead of PagePrivate

Conversion of other state information will happen in subsequent patches.

Link: https://lkml.kernel.org/r/20210122195231.324857-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20210122195231.324857-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: workingset: clarify eviction order and distance calculation

The premise of the refault distance is that it can be seen as a deficit of
the inactive list space, so that if the inactive list would have had (R -
E) more slots, the page would not have been evicted but promoted to the
active list instead.

However, the way the code is ordered right now set us to be off by one, so
the real number of slots would be (R - E) + 1.  I stumbled upon this when
trying to understand the code and it puzzled me that the comments did not
match what the code did.

This it not an issue at all since evictions and refaults tend to happen in
a number large enough that being off-by-one does not have any impact - and
since the compiler and CPUs are free to rearrange the execution sequence
anyway.

But as Johannes says, it is better to re-arrange the code in the proper
order since otherwise would be misleading to somebody who is actively
reading and trying to understand the logic of the code - like it happened
to me.

Link: https://lkml.kernel.org/r/20210201060651.3781-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan.c: make lruvec_lru_size() static

All other references to the function were removed after
commit b910718a948a ("mm: vmscan: detect file thrashing at the reclaim
root").

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-11-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-11-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/mm_inline.h: fold __update_lru_size() into its sole caller

All other references to the function were removed after commit
a892cb6b977f ("mm/vmscan.c: use update_lru_size() in update_lru_sizes()").

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-10-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-10-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/mm_inline.h: fold page_lru_base_type() into its sole caller

We've removed all other references to this function.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-9-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-9-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: VM_BUG_ON lru page flags

Move scattered VM_BUG_ONs to two essential places that cover all
lru list additions and deletions.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-8-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-8-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: add __clear_page_lru_flags() to replace page_off_lru()

Similar to page_off_lru(), the new function does non-atomic clearing
of PageLRU() in addition to PageActive() and PageUnevictable(), on a
page that has no references left.

If PageActive() and PageUnevictable() are both set, refuse to clear
either and leave them to bad_page(). This is a behavior change that
is meant to help debug.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-7-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap.c: don't pass "enum lru_list" to del_page_from_lru_list()

The parameter is redundant in the sense that it can be potentially
extracted from the "struct page" parameter by page_lru(). We need to
make sure that existing PageActive() or PageUnevictable() remains
until the function returns. A few places don't conform, and simple
reordering fixes them.

This patch may have left page_off_lru() seemingly odd, and we'll take
care of it in the next patch.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-6-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap.c: don't pass "enum lru_list" to trace_mm_lru_insertion()

The parameter is redundant in the sense that it can be extracted
from the "struct page" parameter by page_lru() correctly.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-5-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-5-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: don't pass "enum lru_list" to lru list addition functions

The "enum lru_list" parameter to add_page_to_lru_list() and
add_page_to_lru_list_tail() is redundant in the sense that it can
be extracted from the "struct page" parameter by page_lru().

A caveat is that we need to make sure PageActive() or
PageUnevictable() is correctly set or cleared before calling
these two functions. And they are indeed.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-4-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-4-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/mm_inline.h: shuffle lru list addition and deletion functions

These functions will call page_lru() in the following patches.  Move them
below page_lru() to avoid the forward declaration.

Link: https://lore.kernel.org/linux-mm/20201207220949.830352-3-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-3-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan.c: use add_page_to_lru_list()

Patch series "mm: lru related cleanups", v2.

The cleanups are intended to reduce the verbosity in lru list operations
and make them less error-prone.  A typical example would be how the
patches change __activate_page():

 static void __activate_page(struct page *page, struct lruvec *lruvec)
 {
  if (!PageActive(page) && !PageUnevictable(page)) {
- int lru = page_lru_base_type(page);
  int nr_pages = thp_nr_pages(page);

- del_page_from_lru_list(page, lruvec, lru);
+ del_page_from_lru_list(page, lruvec);
  SetPageActive(page);
- lru += LRU_ACTIVE;
- add_page_to_lru_list(page, lruvec, lru);
+ add_page_to_lru_list(page, lruvec);
  trace_mm_lru_activate(page);

There are a few more places like __activate_page() and they are
unnecessarily repetitive in terms of figuring out which list a page should
be added onto or deleted from.  And with the duplicated code removed, they
are easier to read, IMO.

Patch 1 to 5 basically cover the above.  Patch 6 and 7 make code more
robust by improving bug reporting.  Patch 8, 9 and 10 take care of some
dangling helpers left in header files.

This patch (of 10):

There is add_page_to_lru_list(), and move_pages_to_lru() should reuse it,
not duplicate it.

Link: https://lkml.kernel.org/r/20210122220600.906146-1-yuzhao@google.com
Link: https://lore.kernel.org/linux-mm/20201207220949.830352-2-yuzhao@google.com/
Link: https://lkml.kernel.org/r/20210122220600.906146-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/workingset.c: avoid unnecessary max_nodes estimation in count_shadow_nodes()

If list_lru_shrink_count is 0, we always return SHRINK_EMPTY regardless of
the value of max_nodes.  So we can return early if nodes == 0 to save some
cpu cycles of approximating a reasonable limit for the nodes.

Link: https://lkml.kernel.org/r/20210123073825.46709-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: __isolate_lru_page_prepare() cleanup

The function just returns 2 results, so using a 'switch' to deal with its
result is unnecessary.  Also simplify it to a bool func as Vlastimil
suggested.

Also remove 'goto' by reusing list_move(), and take Matthew Wilcox's
suggestion to update comments in function.

Link: https://lkml.kernel.org/r/728874d7-2d93-4049-68c1-dcc3b2d52ccd@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: suppress wrong warning info when alloc gigantic page

If hugetlb_cma is enabled, it will skip boot time allocation when
allocating gigantic page, that doesn't means allocation failure, so
suppress this warning info.

Link: https://lkml.kernel.org/r/20210219123909.13130-1-chenwandun@huawei.com
Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: fix copy_huge_page_from_user contig page struct assumption

page structs are not guaranteed to be contiguous for gigantic pages.  The
routine copy_huge_page_from_user can encounter gigantic pages, yet it
assumes page structs are contiguous when copying pages from user space.

Since page structs for the target gigantic page are not contiguous, the
data copied from user space could overwrite other pages not associated
with the gigantic page and cause data corruption.

Non-contiguous page structs are generally not an issue.  However, they can
exist with a specific kernel configuration and hotplug operations.  For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP.  Then, hotplug add memory for the area where
the gigantic page will be allocated.

Link: https://lkml.kernel.org/r/20210217184926.33567-2-mike.kravetz@oracle.com
Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: fix update_and_free_page contig page struct assumption

page structs are not guaranteed to be contiguous for gigantic pages.  The
routine update_and_free_page can encounter a gigantic page, yet it assumes
page structs are contiguous when setting page flags in subpages.

If update_and_free_page encounters non-contiguous page structs, we can see
“BUG: Bad page state in process …” errors.

Non-contiguous page structs are generally not an issue.  However, they can
exist with a specific kernel configuration and hotplug operations.  For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP.  Then, hotplug add memory for the area where
the gigantic page will be allocated.  Zi Yan outlined steps to reproduce
here [1].

[1] https://lore.kernel.org/linux-mm/16F7C58B-4D79-41C5-9B64-A1A1628F4AF2@nvidia.com/

Link: https://lkml.kernel.org/r/20210217184926.33567-1-mike.kravetz@oracle.com
Fixes: 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: use helper huge_page_size() to get hugepage size

We can use helper huge_page_size() to get the hugepage size directly to
simplify the code slightly.

[linmiaohe@huawei.com: use helper huge_page_size() to get hugepage size]
Link: https://lkml.kernel.org/r/20210209021803.49211-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210208082450.15716-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: remove unnecessary VM_BUG_ON_PAGE on putback_active_hugepage()

All callers know they are operating on a hugetlb head page.  So this
VM_BUG_ON_PAGE can not catch anything useful.

Link: https://lkml.kernel.org/r/20210209071151.44731-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: use helper function range_in_vma() in page_table_shareable()

We could use helper function range_in_vma() to check whether the vma is in
the desired range to simplify the code.

Link: https://lkml.kernel.org/r/20210204112949.43051-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb_cgroup: use helper pages_per_huge_page() in hugetlb_cgroup

We could use helper function pages_per_huge_page() to get the number of
pages in a hstate to simplify the code slightly.

Link: https://lkml.kernel.org/r/20210205084513.29624-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/pmem: avoid inserting hugepage PTE entry with fsdax if hugepage support is disabled

Differentiate between hardware not supporting hugepages and user disabling
THP via 'echo never > /sys/kernel/mm/transparent_hugepage/enabled'

For the devdax namespace, the kernel handles the above via the
supported_alignment attribute and failing to initialize the namespace if
the namespace align value is not supported on the platform.

For the fsdax namespace, the kernel will continue to initialize the
namespace.  This can result in the kernel creating a huge pte entry even
though the hardware don't support the same.

We do want hugepage support with pmem even if the end-user disabled THP
via sysfs file (/sys/kernel/mm/transparent_hugepage/enabled).  Hence
differentiate between hardware/firmware lacking support vs user-controlled
disable of THP and prevent a huge fault if the hardware lacks hugepage
support.

Link: https://lkml.kernel.org/r/20210205023956.417587-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/huge_memory.c: remove unused return value of set_huge_zero_page()

The return value of set_huge_zero_page() is always ignored.  So we should
drop such return value.

Link: https://lkml.kernel.org/r/20210203084816.46307-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb.c: fix typos in comments

Fix typo in comment.

Link: https://lkml.kernel.org/r/1612256106-9436-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: remove redundant check in preparing and destroying gigantic page

Gigantic page is a compound page and its order is more than 1.  Thus it
must be available for hpage_pincount.  Let's remove the redundant check
for gigantic page.

Link: https://lkml.kernel.org/r/20210202112002.73170-1-yanfei.xu@windriver.com
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: fix some comment typos

Fix typos sasitfy to satisfy, reservtion to reservation, hugegpage to
hugepage and uniprocesor to uniprocessor in comments.

Link: https://lkml.kernel.org/r/20210128112028.64831-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: refactor subpage recording

For a given hugepage backing a VA, there's a rather ineficient loop which
is solely responsible for storing subpages in GUP @pages/@vmas array.  For
each subpage we check whether it's within range or size of @pages and keep
increment @pfn_offset and a couple other variables per subpage iteration.

Simplify this logic and minimize the cost of each iteration to just store
the output page/vma.  Instead of incrementing number of @refs iteratively,
we do it through pre-calculation of @refs and only with a tight loop for
storing pinned subpages/vmas.

Additionally, retain existing behaviour with using mem_map_offset() when
recording the subpages for configurations that don't have a contiguous
mem_map.

pinning consequently improves bringing us close to
{pin,get}_user_pages_fast:

  - 16G with 1G huge page size
  gup_test -f /mnt/huge/file -m 16384 -r 30 -L -S -n 512 -w

PIN_LONGTERM_BENCHMARK: ~12.8k us -> ~5.8k us
PIN_FAST_BENCHMARK: ~3.7k us

Link: https://lkml.kernel.org/r/20210128182632.24562-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: grab head page refcount once for group of subpages

Patch series "mm/hugetlb: follow_hugetlb_page() improvements", v2.

While looking at ZONE_DEVICE struct page reuse particularly the last
patch[0], I found two possible improvements for follow_hugetlb_page()
which is solely used for get_user_pages()/pin_user_pages().

The first patch batches page refcount updates while the second tidies up
storing the subpages/vmas.  Both together bring the cost of slow variant
of gup() cost from ~87.6k usecs to ~5.8k usecs.

libhugetlbfs tests seem to pass as well gup_test benchmarks with hugetlbfs
vmas.

This patch (of 2):

follow_hugetlb_page() once it locks the pmd/pud, checks all its N subpages
in a huge page and grabs a reference for each one.  Similar to gup-fast,
have follow_hugetlb_page() grab the head page refcount only after counting
all its subpages that are part of the just faulted huge page.

Consequently we reduce the number of atomics necessary to pin said huge
page, which improves non-fast gup() considerably:

  - 16G with 1G huge page size
  gup_test -f /mnt/huge/file -m 16384 -r 10 -L -S -n 512 -w

PIN_LONGTERM_BENCHMARK: ~87.6k us -> ~12.8k us

Link: https://lkml.kernel.org/r/20210128182632.24562-1-joao.m.martins@oracle.com
Link: https://lkml.kernel.org/r/20210128182632.24562-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: simplify the calculation of variables

Fix the following coccicheck warnings:

  mm/hugetlb.c:3372:20-22: WARNING !A || A && B is equivalent to !A || B.

Link: https://lkml.kernel.org/r/1611643468-52233-1-git-send-email-abaci-bugfix@linux.alibaba.com
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: fix use after free when subpool max_hpages accounting is not enabled

If a hugetlbfs filesystem is created with the min_size option and
without the size option, used_hpages is always 0 and might lead to
release subpool prematurely because it indicates no pages are used now
while there might be.

In order to fix this issue, we should check used_hpages == 0 iff
max_hpages accounting is enabled.  As max_hpages accounting should be
enabled in most common case, this is not worth a Cc stable.

[mike.kravetz@oracle.com: new changelog]

Link: https://lkml.kernel.org/r/20210126115510.53374-1-linmiaohe@huawei.com
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: use helper huge_page_order and pages_per_huge_page

Since commit a5516438959d ("hugetlb: modular state for hugetlb page
size"), we can use huge_page_order to access hstate->order and
pages_per_huge_page to fetch the pages per huge page.  But
gather_bootmem_prealloc() forgot to use it.

Link: https://lkml.kernel.org/r/20210114114435.40075-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: avoid unnecessary hugetlb_acct_memory() call

When reservation accounting remains unchanged, hugetlb_acct_memory() will
do nothing except holding and releasing hugetlb_lock.  We should avoid
this unnecessary hugetlb_lock lock/unlock cycle which is happening on
'most' hugetlb munmap operations by check delta against 0 at the beginning
of hugetlb_acct_memory.

Link: https://lkml.kernel.org/r/20210115092013.61012-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb.c: fix unnecessary address expansion of pmd sharing

The current code would unnecessarily expand the address range.  Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand.  But the current result will be (1G-4M, 3G+4M).  Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.

After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.

With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end.  Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).

Mike:

: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing.  Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed.  This would/could
: result in performance degradation.  However, this is highly dependent on
: the user runtime.  Is there a combination of vma layout and calls to
: actually hit this issue?  If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?

Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: fix potential double free in hugetlb_register_node() error path

In hugetlb_sysfs_add_hstate(), we would do kobject_put() on hstate_kobjs
when failed to create sysfs group but forget to set hstate_kobjs to NULL.
Then in hugetlb_register_node() error path, we may free it again via
hugetlb_unregister_node().

Link: https://lkml.kernel.org/r/20210107123249.36964-1-linmiaohe@huawei.com
Fixes: a3437870160c ("hugetlb: new sysfs interface")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MIPS: do not call flush_tlb_all when setting pmd entry

Function set_pmd_at is to set pmd entry, if tlb entry need to be flushed,
there exists pmdp_huge_clear_flush alike function before set_pmd_at is
called.  So it is not necessary to call flush_tlb_all in this function.

In these scenarios, tlb for the pmd range needs to be flushed:

 - privilege degrade such as wrprotect is set on the pmd entry

 - pmd entry is cleared

 - there is exception if set_pmd_at is issued by dup_mmap, since
   flush_tlb_mm is called for parent process, it is not necessary to
   flush tlb in function copy_huge_pmd.

Link: http://lkml.kernel.org/r/1592990792-1923-3-git-send-email-maobibo@loongson.cn
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Daniel Silsby <dansilsby@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/huge_memory.c: update tlb entry if pmd is changed

When set_pmd_at is called in function do_huge_pmd_anonymous_page, new tlb
entry can be added by software on MIPS platform.

Here add update_mmu_cache_pmd when pmd entry is set, and
update_mmu_cache_pmd is defined as empty excepts arc/mips platform.  This
patch has no negative effect on other platforms except arc/mips system.

Link: http://lkml.kernel.org/r/1592990792-1923-2-git-send-email-maobibo@loongson.cn
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Daniel Silsby <dansilsby@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm,hwpoison: send SIGBUS to PF_MCE_EARLY processes on action required events

When a memory uncorrected error is triggered by process who accessed the
address with error, It's Action Required Case for only current process
which triggered this; This Action Required case means Action optional to
other process who share the same page.  Usually killing current process
will be sufficient, other processes sharing the same page will get be
signaled when they really touch the poisoned page.

But there is another scenario that other processes sharing the same page
want to be signaled early with PF_MCE_EARLY set.  In this case, we should
get them into kill list and signal BUS_MCEERR_AO to them.

So in this patch, task_early_kill will check current process if
force_early is set, and if not current,the code will fallback to
find_early_kill_thread() to check if there is PF_MCE_EARLY process who
cares the error.

In kill_proc(), BUS_MCEERR_AR is only send to current, other processes in
kill list will be signaled with BUS_MCEERR_AO.

Link: https://lkml.kernel.org/r/20210122132424.313c8f5f.yaoaili@kingsoft.com
Signed-off-by: Aili Yao <yaoaili@kingsoft.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>