dyndbg: make dyndbg a known cli param

[ Upstream commit 5ca173974888368fecfb17ae6fe455df5fd2a9d2 ]

Right now dyndbg shows up as an unknown parameter if used on boot:

    Unknown command line parameters: dyndbg=+p

That's because it is unknown, it doesn't sit in the __param
section, so the processing done to warn users supplying an unknown
parameter doesn't think it is legitimate.

Install a dummy handler to register it. dynamic debug needs to search
the whole command line for modules listed that are currently builtin,
so there's no real work to be done in this callback.

Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters")
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-2-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Set sgtable nents when using ib_dma_virt_map_sg()

[ Upstream commit ac0fffa0859b8e1e991939663b3ebdd80bf979e6 ]

ib_dma_map_sgtable_attrs() should be mapping the sgls and setting nents
but the ib_uses_virt_dma() path falls back to ib_dma_virt_map_sg() which
will not set the nents in the sgtable.

Check the return value (per the map_sg calling convention) and set
sgt->nents appropriately on success.

Fixes: 79fbd3e1241c ("RDMA: Use the sg_table directly and remove the opencoded version from umem")
Link: https://lore.kernel.org/r/20211013165942.89806-1-logang@deltatee.com
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: ks7010: select CRYPTO_HASH/CRYPTO_MICHAEL_MIC

[ Upstream commit 9ca0e55e52c7b2a99f3c2051fc4bd1c63a061519 ]

Fix the following build/link errors:

  ld: drivers/staging/ks7010/ks_hostif.o: in function `michael_mic.constprop.0':
  ks_hostif.c:(.text+0x95b): undefined reference to `crypto_alloc_shash'
  ld: ks_hostif.c:(.text+0x97a): undefined reference to `crypto_shash_setkey'
  ld: ks_hostif.c:(.text+0xa13): undefined reference to `crypto_shash_update'
  ld: ks_hostif.c:(.text+0xa28): undefined reference to `crypto_shash_update'
  ld: ks_hostif.c:(.text+0xa48): undefined reference to `crypto_shash_finup'
  ld: ks_hostif.c:(.text+0xa6d): undefined reference to `crypto_destroy_tfm'

Fixes: 8b523f20417d ("staging: ks7010: removed custom Michael MIC implementation.")
Fixes: 3e5bc68fa5968 ("staging: ks7010: Fix build error")
Fixes: a4961427e7494 ("Revert "staging: ks7010: Fix build error"")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20211011152941.12847-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: most: dim2: do not double-register the same device

[ Upstream commit 2ab189164056b05474275bb40caa038a37713061 ]

Commit 723de0f9171e ("staging: most: remove device from interface
structure") moved registration of driver-provided struct device to
the most subsystem.

Dim2 used to register the same struct device to provide a custom device
attribute. This causes double-registration of the same struct device.

Fix that by moving the custom attribute to driver's dev_groups.
This moves attribute to the platform_device object, which is a better
location for platform-specific attributes anyway.

Fixes: 723de0f9171e ("staging: most: remove device from interface structure")
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20211011061117.21435-1-nikita.yoush@cogentembedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: select GENERIC_PHY instead of depending on it

[ Upstream commit fde1fbedbaed4e76cef4600d775b185f59b9b568 ]

The kconfig symbol GENERIC_PHY says:
  All the users of this framework should select this config.
and around 136 out of 138 drivers do so, so change USB_MUSB_MEDIATEK
to do so also.

This (also) fixes a long circular dependency problem for an upcoming
patch.

Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller")
Cc: Bin Liu <b-liu@ti.com>
Cc: Min Guo <min.guo@mediatek.com>
Cc: Yonglong Wu <yonglong.wu@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20211005235747.5588-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx4: Return missed an error if device doesn't support steering

[ Upstream commit f4e56ec4452f48b8292dcf0e1c4bdac83506fb8b ]

The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.

Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()

[ Upstream commit f4875d509a0a78ad294a1a538d534b5ba94e685a ]

This variable is just a temporary variable, used to do an endian
conversion.  The problem is that the last byte is not initialized.  After
the conversion is completely done, the last byte is discarded so it doesn't
cause a problem.  But static checkers and the KMSan runtime checker can
detect the uninitialized read and will complain about it.

Link: https://lore.kernel.org/r/20211006073242.GA8404@kili
Fixes: 5036f0a0ecd3 ("[SCSI] csiostor: Fix sparse warnings.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: max17040: fix null-ptr-deref in max17040_probe()

[ Upstream commit 1d422ecfc48ee683ae1ccc9217764f6310c0ffce ]

Add check the return value of devm_regmap_init_i2c(), otherwise
later access may cause null-ptr-deref as follows:

KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367]
RIP: 0010:regmap_read+0x33/0x170
Call Trace:
  max17040_probe+0x61b/0xff0 [max17040_battery]
 ? write_comp_data+0x2a/0x90
 ? max17040_set_property+0x1d0/0x1d0 [max17040_battery]
 ? tracer_hardirqs_on+0x33/0x520
 ? __sanitizer_cov_trace_pc+0x1d/0x50
 ? _raw_spin_unlock_irqrestore+0x4b/0x60
 ? trace_hardirqs_on+0x63/0x2d0
 ? write_comp_data+0x2a/0x90
 ? __sanitizer_cov_trace_pc+0x1d/0x50
 ? max17040_set_property+0x1d0/0x1d0 [max17040_battery]
 i2c_device_probe+0xa31/0xbe0

Fixes: 6455a8a84bdf ("power: supply: max17040: Use regmap i2c")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: rt5033_battery: Change voltage values to µV

[ Upstream commit bf895295e9a73411889816f1a0c1f4f1a2d9c678 ]

Currently the rt5033_battery driver provides voltage values in mV. It
should be µV as stated in Documentation/power/power_supply_class.rst.

Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
Cc: Beomho Seo <beomho.seo@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: hid: fix error code in do_config()

[ Upstream commit 68e7c510fdf4f6167404609da52e1979165649f6 ]

Return an error code if usb_get_function() fails.  Don't return success.

Fixes: 4bc8a33f2407 ("usb: gadget: hid: convert to new interface of f_hid")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211011123739.GC15188@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_dw: Drop wrong use of ACPI_PTR()

[ Upstream commit ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ]

ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.

Instead of adding ifdeffery here and there, drop ACPI_PTR().

Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/paravirt: correct preempt debug splat in vcpu_is_preempted()

[ Upstream commit fda0eb220021a97c1d656434b9340ebf3fc4704a ]

vcpu_is_preempted() can be used outside of preempt-disabled critical
sections, yielding warnings such as:

BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/185
caller is rwsem_spin_on_owner+0x1cc/0x2d0
CPU: 1 PID: 185 Comm: systemd-udevd Not tainted 5.15.0-rc2+ #33
Call Trace:
[c000000012907ac0] [c000000000aa30a8] dump_stack_lvl+0xac/0x108 (unreliable)
[c000000012907b00] [c000000001371f70] check_preemption_disabled+0x150/0x160
[c000000012907b90] [c0000000001e0e8c] rwsem_spin_on_owner+0x1cc/0x2d0
[c000000012907be0] [c0000000001e1408] rwsem_down_write_slowpath+0x478/0x9a0
[c000000012907ca0] [c000000000576cf4] filename_create+0x94/0x1e0
[c000000012907d10] [c00000000057ac08] do_symlinkat+0x68/0x1a0
[c000000012907d70] [c00000000057ae18] sys_symlink+0x58/0x70
[c000000012907da0] [c00000000002e448] system_call_exception+0x198/0x3c0
[c000000012907e10] [c00000000000c54c] system_call_common+0xec/0x250

The result of vcpu_is_preempted() is always used speculatively, and the
function does not access per-cpu resources in a (Linux) preempt-unsafe way.
Use raw_smp_processor_id() to avoid such warnings, adding explanatory
comments.

Fixes: ca3f969dcb11 ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-3-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: fix unbalanced node refcount in check_kvm_guest()

[ Upstream commit 56537faf8821e361d739fc5ff58c9c40f54a1d4c ]

When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it
returns without performing a matching put for the lookup, leaving the
node's reference count elevated.

Add the necessary call to of_node_put(), rearranging the code slightly to
avoid repetition or goto.

Fixes: 107c55005fbd ("powerpc/pseries: Add KVM guest doorbell restrictions")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928124550.132020-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: chipsfb: use memset_io() instead of memset()

[ Upstream commit f2719b26ae27282c145202ffd656d5ff1fe737cc ]

While investigating a lockup at startup on Powerbook 3400C, it was
identified that the fbdev driver generates alignment exception at
startup:

  --- interrupt: 600 at memset+0x60/0xc0
  NIP:  c0021414 LR: c03fc49c CTR: 00007fff
  REGS: ca021c10 TRAP: 0600   Tainted: G        W          (5.14.2-pmac-00727-g12a41fa69492)
  MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 44008442  XER: 20000100
  DAR: cab80020 DSISR: 00017c07
  GPR00: 00000007 ca021cd0 c14412e0 cab80000 00000000 00100000 cab8001c 00000004
  GPR08: 00100000 00007fff 00000000 00000000 84008442 00000000 c0006fb4 00000000
  GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00100000
  GPR24: 00000000 81800000 00000320 c15fa400 c14d1878 00000000 c14d1800 c094e19c
  NIP [c0021414] memset+0x60/0xc0
  LR [c03fc49c] chipsfb_pci_init+0x160/0x580
  --- interrupt: 600
  [ca021cd0] [c03fc46c] chipsfb_pci_init+0x130/0x580 (unreliable)
  [ca021d20] [c03a3a70] pci_device_probe+0xf8/0x1b8
  [ca021d50] [c043d584] really_probe.part.0+0xac/0x388
  [ca021d70] [c043d914] __driver_probe_device+0xb4/0x170
  [ca021d90] [c043da18] driver_probe_device+0x48/0x144
  [ca021dc0] [c043e318] __driver_attach+0x11c/0x1c4
  [ca021de0] [c043ad30] bus_for_each_dev+0x88/0xf0
  [ca021e10] [c043c724] bus_add_driver+0x190/0x22c
  [ca021e40] [c043ee94] driver_register+0x9c/0x170
  [ca021e60] [c0006c28] do_one_initcall+0x54/0x1ec
  [ca021ed0] [c08246e4] kernel_init_freeable+0x1c0/0x270
  [ca021f10] [c0006fdc] kernel_init+0x28/0x11c
  [ca021f30] [c0017148] ret_from_kernel_thread+0x14/0x1c
  Instruction dump:
  7d4601a4 39490777 7d4701a4 39490888 7d4801a4 39490999 7d4901a4 39290aaa
  7d2a01a4 4c00012c 4bfffe88 0fe00000 <4bfffe80> 9421fff0 38210010 48001970

This is due to 'dcbz' instruction being used on non-cached memory.
'dcbz' instruction is used by memset() to zeroize a complete
cacheline at once, and memset() is not expected to be used on non
cached memory.

When performing a 'sparse' check on fbdev driver, it also appears
that the use of memset() is unexpected:

  drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces)
  drivers/video/fbdev/chipsfb.c:334:17:    expected void *
  drivers/video/fbdev/chipsfb.c:334:17:    got char [noderef] __iomem *screen_base
  drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576

Use fb_memset() instead of memset(). fb_memset() is defined as
memset_io() for powerpc.

Fixes: 8c8709334cec ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK")
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/884a54f1e5cb774c1d9b4db780209bee5d4f6718.1631712563.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mem: Fix arch/powerpc/mm/mem.c:53:12: error: no previous prototype for 'create_section_mapping'

[ Upstream commit 7eff9bc00ddf1e2281dff575884b7f676c85b006 ]

Commit 8e11d62e2e87 ("powerpc/mem: Add back missing header to fix 'no
previous prototype' error") was supposed to fix the problem, but in
the meantime commit a927bd6ba952 ("mm: fix phys_to_target_node() and*
memory_add_physaddr_to_nid() exports") moved create_section_mapping()
prototype from asm/sparsemem.h to asm/mmzone.h

Fixes: 8e11d62e2e87 ("powerpc/mem: Add back missing header to fix 'no previous prototype' error")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/025754fde3d027904ae9d0191f395890bec93369.1631541649.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: at91: check pmc node status before registering syscore ops

[ Upstream commit c405f5c15e9f6094f2fa1658e73e56f3058e2122 ]

Currently, at91 pmc driver always register the syscore_ops whatever
the status of the pmc node that has been found. When set as secure
and disabled, the pmc should not be accessed or this will generate
abort exceptions.
To avoid this, add a check on node availability before registering
the syscore operations.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20210913082633.110168-1-clement.leger@bootlin.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Fixes: b3b02eac33ed ("clk: at91: Add sama5d2 suspend/resume")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe

[ Upstream commit 4ed2f3545c2e5acfbccd7f85fea5b1a82e9862d7 ]

The error handling code of fsl_ifc_ctrl_probe is problematic. When
fsl_ifc_ctrl_init fails or request_irq of fsl_ifc_ctrl_dev->irq fails,
it forgets to free the irq and nand_irq. Meanwhile, if request_irq of
fsl_ifc_ctrl_dev->nand_irq fails, it will still free nand_irq even if
the request_irq is not successful.

Fix this by refactoring the error handling code.

Fixes: d2ae2e20fbdd ("driver/memory:Move Freescale IFC driver to a common driver")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210925151434.8170-1-mudongliangabcd@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/tegra: Fix an error handling path in tegra_powergate_power_up()

[ Upstream commit 986b5094708e508baa452a23ffe809870934a7df ]

If an error occurs after a successful tegra_powergate_enable_clocks()
call, it must be undone by a tegra_powergate_disable_clocks() call, as
already done in the below and above error handling paths of this function.

Update the 'goto' to branch at the correct place of the error handling
path.

Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: st_pressure_spi: Add missing entries SPI to device ID table

[ Upstream commit 03748d4e003c9f2ad3cd00e3e46f054dcad6b96d ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding SPI IDs for parts that
only have a compatible listed.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210927134153.12739-1-broonie@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: topology: do not power down primary core during topology removal

[ Upstream commit ec626334eaffe101df9ed79e161eba95124e64ad ]

When removing the topology components, do not power down
the primary core. Doing so will result in an IPC timeout
when the SOF PCI device runtime suspends.

Fixes: 0dcdf84289fb ("ASoC: SOF: add a "core" parameter to widget loading functions")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211006104041.27183-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm: dts: omap3-gta04a4: accelerometer irq fix

[ Upstream commit 884ea75d79a36faf3731ad9d6b9c29f58697638d ]

Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.

Fixes: ee327111953b ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

driver core: Fix possible memory leak in device_link_add()

[ Upstream commit df0a18149474c7e6b21f6367fbc6bc8d0f192444 ]

I got memory leak as follows:

unreferenced object 0xffff88801f0b2200 (size 64):
  comm "i2c-lis2hh12-21", pid 5455, jiffies 4294944606 (age 15.224s)
  hex dump (first 32 bytes):
    72 65 67 75 6c 61 74 6f 72 3a 72 65 67 75 6c 61  regulator:regula
    74 6f 72 2e 30 2d 2d 69 32 63 3a 31 2d 30 30 31  tor.0--i2c:1-001
  backtrace:
    [<00000000bf5b0c3b>] __kmalloc_track_caller+0x19f/0x3a0
    [<0000000050da42d9>] kvasprintf+0xb5/0x150
    [<000000004bbbed13>] kvasprintf_const+0x60/0x190
    [<00000000cdac7480>] kobject_set_name_vargs+0x56/0x150
    [<00000000bf83f8e8>] dev_set_name+0xc0/0x100
    [<00000000cc1cf7e3>] device_link_add+0x6b4/0x17c0
    [<000000009db9faed>] _regulator_get+0x297/0x680
    [<00000000845e7f2b>] _devm_regulator_get+0x5b/0xe0
    [<000000003958ee25>] st_sensors_power_enable+0x71/0x1b0 [st_sensors]
    [<000000005f450f52>] st_accel_i2c_probe+0xd9/0x150 [st_accel_i2c]
    [<00000000b5f2ab33>] i2c_device_probe+0x4d8/0xbe0
    [<0000000070fb977b>] really_probe+0x299/0xc30
    [<0000000088e226ce>] __driver_probe_device+0x357/0x500
    [<00000000c21dda32>] driver_probe_device+0x4e/0x140
    [<000000004e650441>] __device_attach_driver+0x257/0x340
    [<00000000cf1891b8>] bus_for_each_drv+0x166/0x1e0

When device_register() returns an error, the name allocated in dev_set_name()
will be leaked, the put_device() should be used instead of kfree() to give up
the device reference, then the name will be freed in kobject_cleanup() and the
references of consumer and supplier will be decreased in device_link_release_fn().

Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210930085714.2057460-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix misleading log statement in pm8001_mpi_get_nvmd_resp()

[ Upstream commit 4084a7235d38311a77c86ba69ba849bd787db87b ]

pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a
SET_NVMD_DATA response, as the log statement implies.

Fixes: 1f889b58716a ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition")
Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.com
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: Fix concurrent access to ISR between IRQ polling and real interrupt

[ Upstream commit e7dcc514a49e74051b869697d5ab0370f6301d57 ]

IRQ polling thread calls ISR after enable_irq() to handle any missed I/O
completion. The atomic flag "in_used" was added to have the synchronization
between the IRQ polling thread and the interrupt context. There is a bug
around it leading to a race condition.

Below is the sequence:

 - IRQ polling thread accesses ISR, fetches the reply descriptor.

 - Real interrupt arrives and pre-empts polling thread (enable_irq() is
   already called).

 - Interrupt context picks the same reply descriptor as fetched by polling
   thread, processes it, and exits.

 - Polling thread resumes and processes the descriptor which is already
   processed by interrupt thread leads to kernel crash.

Setting the "in_used" flag before fetching the reply descriptor ensures
synchronized access to ISR.

Link: https://www.spinics.net/lists/linux-scsi/msg159440.html
Link: https://lore.kernel.org/r/20210929124022.24605-2-sumit.saxena@broadcom.com
Fixes: 9bedd36e9146 ("scsi: megaraid_sas: Handle missing interrupts while re-enabling IRQs")
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Stop clearing UNIT ATTENTIONS

[ Upstream commit edc0596cc04bf0ac3a69c66e994d3ff8b650ff71 ]

Commit aa53f580e67b ("scsi: ufs: Minor adjustments to error handling")
introduced a ufshcd_clear_ua_wluns() call in
ufshcd_err_handling_unprepare(). As explained in detail by Adrian Hunter,
this can trigger a deadlock. Avoid that deadlock by removing the code that
clears the unit attention. This is safe because the only software that
relies on clearing unit attentions is the Android Trusty software and
because support for handling unit attentions has been added in the Trusty
software.

See also https://lore.kernel.org/linux-scsi/20210930124224.114031-2-adrian.hunter@intel.com/

Note that "scsi: ufs: Retry START_STOP on UNIT_ATTENTION" is a prerequisite
for this commit.

Link: https://lore.kernel.org/r/20211001182015.1347587-3-jaegeuk@kernel.org
Fixes: aa53f580e67b ("scsi: ufs: Minor adjustments to error handling")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Fix ufshcd_probe_hba() prototype to match the definition

[ Upstream commit 68444d73d6a5864ede12df6366bd6602e022ae5b ]

Since commit 568dd9959611 ("scsi: ufs: Rename the second ufshcd_probe_hba()
argument"), the second ufshcd_probe_hba() argument has been changed to
init_dev_params.

Link: https://lore.kernel.org/r/20210929200640.828611-3-huobean@gmail.com
Fixes: 568dd9959611 ("scsi: ufs: Rename the second ufshcd_probe_hba() argument")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: reset: at91-reset: check properly the return value of devm_of_iomap

[ Upstream commit f558c8072c3461b65c12c0068b108f78cebc8246 ]

devm_of_iomap() returns error code or valid pointer. Check its return
value with IS_ERR().

Fixes: bd3127733f2c ("power: reset: at91-reset: use devm_of_iomap")
Reported-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: debugfs: use controller id and link_id for debugfs

[ Upstream commit 75eac387a2539aa6c6bbee3affa23435f2096396 ]

link_id can be zero and if we have multiple controller instances
in a system like Qualcomm debugfs will end-up with duplicate namespace
resulting in incorrect debugfs entries.

Using bus-id and link-id combination should give a unique debugfs directory
entry and should fix below warning too.
"debugfs: Directory 'master-0' with parent 'soundwire' already present!"

Fixes: bf03473d5bcc ("soundwire: add debugfs support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210907105332.1257-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Fix possible race at sync of urb completions

[ Upstream commit 86a42ad07905110f82648853c0ea3434b4eab173 ]

USB-audio driver tries to sync with the clear of all pending URBs in
wait_clear_urbs(), and it waits for all bits in active_mask getting
cleared.  This works fine for the normal operations, but when a stream
is managed in the implicit feedback mode, there is still a very thin
race window: namely, in snd_complete_usb(), the active_mask bit for
the current URB is once cleared before re-submitted in
queue_pending_output_urbs().  If wait_clear_urbs() is called during
that period, it may pass the test and go forward even though there may
be a still pending URB.

For covering it, this patch adds a new counter to each endpoint to
keep the number of in-flight URBs, and changes wait_clear_urbs()
checking this number instead.  The counter is decremented at the end
of URB complete, hence the reference is kept as long as the URB
complete is in process.

Link: https://lore.kernel.org/r/20210929080844.11583-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Use position buffer for SKL+ again

[ Upstream commit c4ca3871e21fa085096316f5f8d9975cf3dfde1d ]

The commit f87e7f25893d ("ALSA: hda - Improved position reporting on
SKL+") changed the PCM position report for SKL+ chips to use DPIB, but
according to Pierre, DPIB is no best choice for the accurate position
reports and it often reports too early.  The recommended method is
rather the classical position buffer.

This patch makes the PCM position reporting on SKL+ back to the
position buffer again.

Fixes: f87e7f25893d ("ALSA: hda - Improved position reporting on SKL+")
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210929072934.6809-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: Reduce udelay() at SKL+ position reporting

[ Upstream commit 46243b85b0ec5d2cee7545e5ce18c015ce91957e ]

The position reporting on Intel Skylake and later chips via
azx_get_pos_skl() contains a udelay(20) call for the capture streams.
A call for this alone doesn't sound too harmful.  However, as the
pointer PCM ops is one of the hottest path in the PCM operations --
especially for the timer-scheduled operations like PulseAudio -- such
a delay hogs CPU usage significantly in the total performance.

The code there was taken from the original code in ASoC SST Skylake
driver blindly.  The udelay() is a workaround for the case where the
reported position is behind the period boundary at the timing
triggered from interrupts; applications often expect that the full
data is available for the whole period when returned (and also that's
the definition of the ALSA PCM period).

OTOH, HD-audio (legacy) driver has already some workarounds for the
delayed position reporting due to its relatively large FIFO, such as
the BDL position adjustment and the delayed period-elapsed call in the
work.  That said, the udelay() is almost superfluous for HD-audio
driver unlike SST, and we can drop the udelay().

Though, the current code doesn't guarantee the full period readiness
as mentioned in the above, but rather it checks the wallclock and
detects the unexpected jump.  That's one missing piece, and the drop
of udelay() needs a bit more sanity checks for the delayed handling.

This patch implements those: the drop of udelay() call in
azx_get_pos_skl() and the more proper check of hwptr in
azx_position_ok().  The latter change is applied only for the case
where the stream is running in the normal mode without
no_period_wakeup flag.  When no_period_wakeup is set, it essentially
ignores the period handling and rather concentrates only on the
current position; which implies that we don't need to care about the
period boundary at all.

Fixes: f87e7f25893d ("ALSA: hda - Improved position reporting on SKL+")
Reported-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210929072934.6809-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/dma: Fix arch_sync_dma for map

[ Upstream commit 06e620345d544e559b2961cb5a676ec9c80c8950 ]

When calling arch_sync_dma, we need to pass it the memory that's
actually being used for dma. When using swiotlb bounce buffers, this is
the bounce buffer. Move arch_sync_dma into the __iommu_dma_map_swiotlb
helper, so it can use the bounce buffer address if necessary.

Now that iommu_dma_map_sg delegates to a function which takes care of
architectural syncing in the untrusted device case, the call to
iommu_dma_sync_sg_for_device can be moved so it only occurs for trusted
devices. Doing the sync for untrusted devices before mapping never
really worked, since it needs to be able to target swiotlb buffers.

This also moves the architectural sync to before the call to
__iommu_dma_map, to guarantee that untrusted devices can't see stale
data they shouldn't see.

Fixes: 82612d66d51d ("iommu: Allow the iommu/dma api to use bounce buffers")
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20210929023300.335969-3-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/dma: Fix sync_sg with swiotlb

[ Upstream commit 08ae5d4a1ae96b72222e7b02d072bb997ff29dac ]

The is_swiotlb_buffer function takes the physical address of the swiotlb
buffer, not the physical address of the original buffer. The sglist
contains the physical addresses of the original buffer, so for the
sync_sg functions to work properly when a bounce buffer might have been
used, we need to use iommu_iova_to_phys to look up the physical address.
This is what sync_single does, so call that function on each sglist
segment.

The previous code mostly worked because swiotlb does the transfer on map
and unmap. However, any callers which use DMA_ATTR_SKIP_CPU_SYNC with
sglists or which call sync_sg would not have had anything copied to the
bounce buffer.

Fixes: 82612d66d51d ("iommu: Allow the iommu/dma api to use bounce buffers")
Signed-off-by: David Stevens <stevensd@chromium.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210929023300.335969-2-stevensd@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000

[ Upstream commit 483de2b44cd3a168458f8f9ff237e78a434729bc ]

While removing the size from the "reg" properties in pm8916.dtsi,
commit bd6429e81010 ("ARM64: dts: qcom: Remove size elements from
pmic reg properties") mistakenly also removed the second register
address for the rtc@6000 device. That one did not represent the size
of the register region but actually the address of the second "alarm"
register region of the rtc@6000 device.

Now there are "reg-names" for two "reg" elements, but there is actually
only one "reg" listed.

Since the DT schema for "qcom,pm8941-rtc" only expects one "reg"
element anyway, just drop the "reg-names" entirely to fix this.

Fixes: bd6429e81010 ("ARM64: dts: qcom: Remove size elements from pmic reg properties")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928112945.25310-1-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/mediatek: Fix out-of-range warning with clang

[ Upstream commit f13efafc1a2cf30d4a74c00f40210d6de36db2d0 ]

clang-14 notices that a comparison is never true when
CONFIG_PHYS_ADDR_T_64BIT is disabled:

drivers/iommu/mtk_iommu.c:553:34: error: result of comparison of constant 5368709120 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
        if (dom->data->enable_4GB && pa >= MTK_IOMMU_4GB_MODE_REMAP_BASE)
                                     ~~ ^  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Add an explicit check for the type of the variable to skip the check
and the warning in that case.

Fixes: b4dad40e4f35 ("iommu/mediatek: Adjust the PA for the 4GB Mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210927121857.941160-1-arnd@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: beacon: Fix Ethernet PHY mode

[ Upstream commit 59a8bda062f8646d99ff8c4956adf37dee1cb75e ]

While networking works fine in RGMII mode when using the Linux generic
PHY driver, it fails when using the Atheros PHY driver.
Fix this by correcting the Ethernet PHY mode to RGMII-RXID, which works
fine with both drivers.

Fixes: a5200e63af57d05e ("arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling")
Reported-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2a4c15b2df23bb63f15abf9dfb88860477f4f523.1632465965.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clock

[ Upstream commit 8199a0b31e76d158ac14841e7119890461f8c595 ]

At the moment, playing audio on Secondary MI2S will just end up getting
stuck, without actually playing any audio. This happens because the wrong
bit clock is configured when playing audio on Secondary MI2S.

The PRI_I2S_CLK (better name: SPKR_I2S_CLK) is used by the SPKR audio mux
block that provides both Primary and Secondary MI2S.

The SEC_I2S_CLK (better name: MIC_I2S_CLK) is used by the MIC audio mux
block that provides Tertiary MI2S. Quaternary MI2S is also part of the
MIC audio mux but has its own clock (AUX_I2S_CLK).

This means that (quite confusingly) the SEC_I2S_CLK is not actually
used for Secondary MI2S as the name would suggest. Secondary MI2S
needs to have the same clock as Primary MI2S configured.

Fix the clock list for the lpass node in the device tree and add
a comment to clarify this confusing naming. With these changes,
audio can be played correctly on Secondary MI2S.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 3761a3618f55 ("arm64: dts: qcom: add lpass node")
Tested-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210816181810.2242-1-stephan@gerhold.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wcd9335: Use correct version to initialize Class H

[ Upstream commit a270bd9abdc3cd04ec194f1f3164823cbb5a905c ]

The versioning scheme was changed in an earlier patch, which caused the version
being used to initialize WCD9335 to be interpreted as if it was WCD937X, which
changed code paths causing broken headphones output. Pass WCD9335 instead of
WCD9335_VERSION_2_0 to wcd_clsh_ctrl_alloc to fix it.

Fixes: 19c5d1f6a0c3 ("ASoC: codecs: wcd-clsh: add new version support")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210925022339.786296-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: renesas: rzg2l: Fix missing port register 21h

[ Upstream commit fcfb63148c241adad54ed99fc318167176d7254b ]

Remove the duplicate port register 22h and replace it with missing port
register 21h.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922074140.22178-1-biju.das.jz@bp.renesas.com
Fixes: c4c4637eb57f2a25 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

JFS: fix memleak in jfs_mount

[ Upstream commit c48a14dca2cb57527dde6b960adbe69953935f10 ]

In jfs_mount, when diMount(ipaimap2) fails, it goes to errout35. However,
the following code does not free ipaimap2 allocated by diReadSpecial.

Fix this by refactoring the error handling code of jfs_mount. To be
specific, modify the lable name and free ipaimap2 when the above error
ocurrs.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT

[ Upstream commit 7f3b3c2bfa9c93ab9b5595543496f570983dc330 ]

mach/loongson64 fails to build when the FPU support is disabled:

arch/mips/loongson64/cop2-ex.c:45:15: error: implicit declaration of function ‘__is_fpu_owner’; did you mean ‘is_fpu_owner’? [-Werror=implicit-function-declaration]
arch/mips/loongson64/cop2-ex.c:98:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:99:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:131:43: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:137:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:203:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:219:30: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:283:38: error: ‘struct thread_struct’ has no member named ‘fpu’
arch/mips/loongson64/cop2-ex.c:301:38: error: ‘struct thread_struct’ has no member named ‘fpu’

Fixes: ef2f826c8f2f ("MIPS: Loongson-3: Enable the COP2 usage")
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Reported-by: k2ci robot <kernel-bot@kylinos.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: dc395: Fix error case unwinding

[ Upstream commit cbd9a3347c757383f3d2b50cf7cfd03eb479c481 ]

dc395x_init_one()->adapter_init() might fail. In this case, the acb is
already cleaned up by adapter_init(), no need to do that in
adapter_uninit(acb) again.

[    1.252251] dc395x: adapter init failed
[    1.254900] RIP: 0010:adapter_uninit+0x94/0x170 [dc395x]
[    1.260307] Call Trace:
[    1.260442]  dc395x_init_one.cold+0x72a/0x9bb [dc395x]

Link: https://lore.kernel.org/r/20210907040702.1846409-1-ztong0001@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: fix display port phy reg property

[ Upstream commit 425f30cc843c727bc7753a0d33710d1e4a999168 ]

Existing display port phy reg property is derived from usb phy which
map display port phy pcs to wrong address which cause aux init
with wrong address and prevent both dpcd read and write from working.
Fix this problem by assigning correct pcs address to display port
phy reg property.

Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631216998-10049-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: llcc: Disable MMUHWT retention

[ Upstream commit 3a461009e195c3c17f6af73da310b886991309fd ]

Disable MMUHWT retention for SC7280 as done for other platforms
to avoid more power burn.

Fixes: f6a07be63301 ("soc: qcom: llcc: Add configuration data for SC7280")
Signed-off-by: Naina Mehta <nainmeht@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921055942.30600-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7180: Base dynamic CPU power coefficients in reality

[ Upstream commit 82ea7d411d43f60dce878252558e926f957109f0 ]

The sc7180's dynamic-power-coefficient violates the device tree bindings.
The bindings (arm/cpus.yaml) say that the units for the
dynamic-power-coefficient are supposed to be "uW/MHz/V^2". The ones for
sc7180 aren't this. Qualcomm arbitrarily picked 100 for the "little" CPUs
and then picked a number for the big CPU based on this.

At the time, there was a giant dicussion about this. Apparently Qualcomm
Engineers were instructed not to share the actual numbers here. As part
of the discussion, I pointed out [1] that these numbers shouldn't really
be secret since once a device is shipping anyone can just run a script
and produce them. This patch is the result of running the script I posted
in that discussion on sc7180-trogdor-coachz, which is currently available
for purchase by consumers.

[1] https://lore.kernel.org/r/CAD=FV=U1FP0e3_AVHpauUUZtD-5X3XCwh5aT9fH_8S_FFML2Uw@mail.gmail.com/

I ran the script four times, measuring little, big, little, big. I used
the 64-bit version of dhrystone 2.2 in my test. I got these results:

576 kHz, 596 mV, 20 mW, 88 Cx
768 kHz, 596 mV, 32 mW, 122 Cx
1017 kHz, 660 mV, 45 mW, 97 Cx
1248 kHz, 720 mV, 87 mW, 139 Cx
1324 kHz, 756 mV, 109 mW, 148 Cx
1516 kHz, 828 mV, 150 mW, 148 Cx
1612 kHz, 884 mV, 182 mW, 147 Cx
1708 kHz, 884 mV, 192 mW, 146 Cx
1804 kHz, 884 mV, 207 mW, 149 Cx
Your dynamic-power-coefficient for cpu 0: 132

825 kHz, 596 mV, 142 mW, 401 Cx
979 kHz, 628 mV, 183 mW, 427 Cx
1113 kHz, 656 mV, 224 mW, 433 Cx
1267 kHz, 688 mV, 282 mW, 449 Cx
1555 kHz, 812 mV, 475 mW, 450 Cx
1708 kHz, 828 mV, 566 mW, 478 Cx
1843 kHz, 884 mV, 692 mW, 476 Cx
1900 kHz, 884 mV, 722 mW, 482 Cx
1996 kHz, 916 mV, 814 mW, 482 Cx
2112 kHz, 916 mV, 862 mW, 483 Cx
2208 kHz, 916 mV, 962 mW, 521 Cx
2323 kHz, 940 mV, 1060 mW, 517 Cx
2400 kHz, 956 mV, 1133 mW, 518 Cx
Your dynamic-power-coefficient for cpu 6: 471

576 kHz, 596 mV, 26 mW, 103 Cx
768 kHz, 596 mV, 40 mW, 147 Cx
1017 kHz, 660 mV, 54 mW, 114 Cx
1248 kHz, 720 mV, 97 mW, 151 Cx
1324 kHz, 756 mV, 113 mW, 150 Cx
1516 kHz, 828 mV, 154 mW, 148 Cx
1612 kHz, 884 mV, 194 mW, 155 Cx
1708 kHz, 884 mV, 203 mW, 152 Cx
1804 kHz, 884 mV, 219 mW, 155 Cx
Your dynamic-power-coefficient for cpu 0: 142

825 kHz, 596 mV, 148 mW, 530 Cx
979 kHz, 628 mV, 189 mW, 475 Cx
1113 kHz, 656 mV, 230 mW, 461 Cx
1267 kHz, 688 mV, 287 mW, 466 Cx
1555 kHz, 812 mV, 469 mW, 445 Cx
1708 kHz, 828 mV, 567 mW, 480 Cx
1843 kHz, 884 mV, 699 mW, 482 Cx
1900 kHz, 884 mV, 719 mW, 480 Cx
1996 kHz, 916 mV, 814 mW, 484 Cx
2112 kHz, 916 mV, 861 mW, 483 Cx
2208 kHz, 916 mV, 963 mW, 522 Cx
2323 kHz, 940 mV, 1063 mW, 520 Cx
2400 kHz, 956 mV, 1135 mW, 519 Cx
Your dynamic-power-coefficient for cpu 6: 489

As you can see, the calculations aren't perfectly consistent but
roughly you could say about 480 for big and 137 for little.

The ratio between these numbers isn't quite the same as the ratio
between the two numbers that Qualcomm used. Perhaps this is because
Qualcomm measured something slightly different than the 64-bit version
of dhrystone 2.2 or perhaps it's because they fudged these numbers a
bit (and fudged the capacity-dmips-mhz). As per discussion [2], let's
use the numbers I came up with and also un-fudge
capacity-dmips-mhz. While unfudging capacity-dmips-mhz, let's scale it
so that bigs are 1024 which seems to be the common practice.

In general these numbers don't need to be perfectly exact. In fact,
they can't be since the CPU power depends a lot on what's being run on
the CPU and the big/little CPUs are each more or less efficient in
different operations. Historically running the 32-bit vs. 64-bit
versions of dhrystone produced notably different numbers, though I
didn't test this time.

We also need to scale all of the sustainable-power numbers by the same
amount. I scale ones related to the big CPUs by the adjustment I made
to the big dynamic-power-coefficient and the ones related to the
little CPUs by the adjustment I made to the little
dynamic-power-coefficient.

[2] https://lore.kernel.org/r/0a865b6e-be34-6371-f9f2-9913ee1c5608@codeaurora.org/

Fixes: 71f873169a80 ("arm64: dts: qcom: sc7180: Add dynamic CPU power coefficients")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210902145127.v2.1.I049b30065f3c715234b6303f55d72c059c8625eb@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: tse850: the emac<->phy interface is rmii

[ Upstream commit dcdbc335a91a26e022a803e1a6b837266989c032 ]

This went unnoticed until commit 7897b071ac3b ("net: macb: convert
to phylink") which tickled the problem. The sama5d3 emac has never
been capable of rgmii, and it all just happened to work before that
commit.

Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix timekeeping_suspended warning on resume

[ Upstream commit b3e9431854e8f305385d5de225441c0477b936cb ]

On resume we can get a warning at kernel/time/timekeeping.c:824 for
timekeeping_suspended.

Let's fix this by adding separate functions for sysc_poll_reset_sysstatus()
and sysc_poll_reset_sysconfig() and have the new functions handle also
timekeeping_suspended.

If iopoll at some point supports timekeeping_suspended, we can just drop
the custom handling from these functions.

Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-sm1: Fix the pwm regulator supply properties

[ Upstream commit 0b26fa8a02c2834f1fa8a206a285b9f84c4ad764 ]

After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VDDCPU pwm regulator to 12V regulator supply
instead of dummy regulator.

[   11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property
               in node /regulator-vddcpu failed
[   11.602344] VDDCPU: supplied by regulator-dummy
[   11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT
[   11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled

Fixes: 88d537bc92ca ("arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi")
Fixes: 700ab8d83927 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L")
Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-4-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-g12b: Fix the pwm regulator supply properties

[ Upstream commit 62183863f708c2464769e0d477c8ce9f3d326feb ]

After enabling CONFIG_REGULATOR_DEBUG=y we observer below debug logs.
Changes help link VDDCP_A and VDDCPU_B pwm regulator to 12V regulator
supply instead of dummy regulator.

[    4.147196] VDDCPU_A: will resolve supply early: pwm
[    4.147216] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply from device tree
[    4.147227] pwm-regulator regulator-vddcpu-a: Looking up pwm-supply property in node /regulator-vddcpu-a failed
[    4.147258] VDDCPU_A: supplied by regulator-dummy
[    4.147288] regulator-dummy: could not add device link regulator.12: -ENOENT
[    4.147353] VDDCPU_A: 721 <--> 1022 mV at 871 mV, enabled
[    4.152014] VDDCPU_B: will resolve supply early: pwm
[    4.152035] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply from device tree
[    4.152047] pwm-regulator regulator-vddcpu-b: Looking up pwm-supply property in node /regulator-vddcpu-b failed
[    4.152079] VDDCPU_B: supplied by regulator-dummy
[    4.152108] regulator-dummy: could not add device link regulator.13: -ENOENT

Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial device-tree")
Fixes: d14734a04a8a ("arm64: dts: meson-g12b-odroid-n2: enable DVFS")
Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-3-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson-g12a: Fix the pwm regulator supply properties

[ Upstream commit 085675117ecf5e02c4220698fd549024ec64ad2c ]

After enabling CONFIG_REGULATOR_DEBUG=y we observe below debug logs.
Changes help link VDDCPU pwm regulator to 12V regulator supply
instead of dummy regulator.

[   11.602281] pwm-regulator regulator-vddcpu: Looking up pwm-supply property
               in node /regulator-vddcpu failed
[   11.602344] VDDCPU: supplied by regulator-dummy
[   11.602365] regulator-dummy: could not add device link regulator.11: -ENOENT
[   11.602548] VDDCPU: 721 <--> 1022 mV at 1022 mV, enabled

Fixes: e9bc0765cc12 ("arm64: dts: meson-g12a: enable DVFS on G12A boards")

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210919202918.3556-2-linux.amoon@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: j7200-main: Fix "bus-range" upto 256 bus number for PCIe

[ Upstream commit 8bb8429290c0043a78804ae48294b53f781ee426 ]

commit 3276d9f53cf6 ("arm64: dts: ti: k3-j7200-main: Add PCIe device
tree node") incorrectly added PCIe bus numbers from 0 to 15 (copy-paste
from J721E node). Enable all the supported bus numbers from 0 to 255
defined in PCIe spec here.

Fixes: 3276d9f53cf6 ("arm64: dts: ti: k3-j7200-main: Add PCIe device tree node")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915055358.19997-5-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: j7200-main: Fix "vendor-id"/"device-id" properties of pcie node

[ Upstream commit 0d553792726a61ced760422e74ea67552ac69cdb ]

commit 3276d9f53cf6 ("arm64: dts: ti: k3-j7200-main: Add PCIe device
tree node") incorrectly added "vendor-id" and "device-id" as 16-bit
properties though both of them are 32-bit properties. Fix it here.

Fixes: 3276d9f53cf6 ("arm64: dts: ti: k3-j7200-main: Add PCIe device tree node")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915055358.19997-4-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721e-main: Fix "bus-range" upto 256 bus number for PCIe

[ Upstream commit 5f46633565b1c1e1840a927676065d72b442dac4 ]

commit 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device
tree nodes") restricted PCIe bus numbers from 0 to 15 (due to SMMU
restriction in J721E). However since SMMU is not enabled, allow the full
supported bus numbers from 0 to 255.

Fixes: 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915055358.19997-3-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-j721e-main: Fix "max-virtual-functions" in PCIe EP nodes

[ Upstream commit 9af3ef954975c383eeb667aee207d9ce6fbef8c4 ]

commit 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device
tree nodes") added "max-virtual-functions" to have 16 bit values.
Fix "max-virtual-functions" in PCIe endpoint (EP) nodes to have 8 bit
values instead of 16.

Fixes: 4e5833884f66 ("arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210915055358.19997-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Fix query SRQ failure

[ Upstream commit 598d16fa1bf93431ad35bbab3ed1affe4fb7b562 ]

Fill the missing parameters for the FW command while querying SRQ.

Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Link: https://lore.kernel.org/r/1631709163-2287-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY

[ Upstream commit 8ccecf6c710b8c048eecc65709640642e5357d6e ]

According to YAML validation, and for a future patchset putting this
xo_board reference clock to use as VCO reference parent, add the missing
clock to dsi_phy0.

Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Fix GPU register width for RK3328

[ Upstream commit 932b4610f55b49f3a158b0db451137bab7ed0e1f ]

As can be seen in RK3328's TRM the register range for the GPU is
0xff300000 to 0xff330000.
It would (and does in vendor kernel) overlap with the registers of
the HEVC encoder (node/driver do not exist yet in upstream kernel).
See already existing h265e_mmu node.

Fixes: 752fbc0c8da7 ("arm64: dts: rockchip: add rk3328 mali gpu node")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210623115926.164861-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()

[ Upstream commit 2aa717473ce96c93ae43a5dc8c23cedc8ce7dd9f ]

The s3c24xx_init_intc() returns an error pointer upon failure, not NULL.
let's add an error pointer check in s3c24xx_handle_irq.

s3c_intc[0] is not NULL or ERR, we can simplify the code.

Fixes: 1f629b7a3ced ("ARM: S3C24XX: transform irq handling into a declarative form")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Link: https://lore.kernel.org/r/20210901123557.1043953-1-liu.yun@linux.dev
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix NVMe I/O failover to non-optimized path

[ Upstream commit b507357f79171fb4fb4e732ca43a1f30bc5aab1d ]

Currently, we hold off unregistering with NVMe transport layer until GID_FT
or ADISC completes upon receipt of RSCN. In the ADISC discovery routine,
for nodes not found in the GID_FT response, the nodes are unregistered from
the SCSI transport but not UNREG_RPI'd. Meaning outstanding WQEs continue
to be outstanding and were not failed back to the OS. If an NVMe device,
this mean there wasn't initial termination of the I/Os so they could be
issued on a different NVMe path.

Fix by unregistering the RPI so that I/O is cancelled.

Link: https://lore.kernel.org/r/20210910233159.115896-8-jsmart2021@gmail.com
Fixes: 0614568361b0 ("scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: edif: Use link event to wake up app

[ Upstream commit 527d46e0b0147f2b32b78ba49c6a231835b24a41 ]

Authentication application may be running and in the past tried to probe
driver (app_start) but was unsuccessful. This could be due to the bsg layer
not being ready to service the request. On a successful link up, driver
will use the netlink Link Up event to notify the app to retry the app_start
call.

In another case, app does not poll for new NPIV host. This link up event
would notify app of the presence of a new SCSI host.

Link: https://lore.kernel.org/r/20210908164622.19240-6-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix lockup in outbound queue management

[ Upstream commit b27a40534ef76a22628a5c12f98ea489823a8ba5 ]

Commit 1f02beff224e ("scsi: pm80xx: Remove global lock from outbound queue
processing") introduced a lock per outbound queue. Prior to that change the
driver was using a global lock for all outbound queues.

While processing the I/O responses and events the driver takes the outbound
queue spinlock and is supposed to release it in pm8001_ccb_task_free_done()
before calling command done(). Since the older code was using a global
lock, pm8001_ccb_task_free_done() was releasing the global spin lock. The
change that split the lock per outbound queue did not consider this and
pm8001_ccb_task_free_done() was still releasing the global lock.

Link: https://lore.kernel.org/r/20210906170404.5682-3-Ajish.Koshy@microchip.com
Fixes: 1f02beff224e ("scsi: pm80xx: Remove global lock from outbound queue processing")
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: mvebu: ap-cpu-clk: Fix a memory leak in error handling paths

[ Upstream commit af9617b419f77cf0b99702a7b2b0519da0d27715 ]

If we exit the for_each_of_cpu_node loop early, the reference on the
current node must be decremented, otherwise there is a leak.

Fixes: f756e362d938 ("clk: mvebu: add CPU clock driver for Armada 7K/8K")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/545df946044fc1fc05a4217cdf0054be7a79e49e.1619161112.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: bcm4908: Fix UART clock name

[ Upstream commit 6c38c39ab2141f53786d73e706675e8819a3f2cb ]

According to the binding the correct clock name is "refclk".

Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM5301X: Fix memory nodes names

[ Upstream commit c5e1df3276d7a500678da9453be31a66ad115150 ]

Thix fixes:
arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']}
arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fix wrong port_cap_flags

[ Upstream commit dcd3f985b20ffcc375f82ca0ca9f241c7025eb5e ]

The port->attr.port_cap_flags should be set to enum
ib_port_capability_mask_bits in ib_mad.h, not
RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210831083223.65797-1-weijunji@bytedance.com
Signed-off-by: Junji Wei <weijunji@bytedance.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: st_sensors: disable regulators after device unregistration

[ Upstream commit 9f0b3e0cc0c88618aa9e5cecef747b1337ae0a5d ]

Up until commit ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal
to core") only the ST pressure driver seems to have had any regulator
disable. After that commit, the regulator handling was moved into the
common st_sensors logic.

In all instances of this regulator handling, the regulators were disabled
before unregistering the IIO device.
This can cause issues where the device would be powered down and still be
available to userspace, allowing it to send invalid/garbage data.

This change moves the st_sensors_power_disable() after the common probe
functions. These common probe functions also handle unregistering the IIO
device.

Fixes: 774487611c949 ("iio: pressure-core: st: Provide support for the Vdd power supply")
Fixes: ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal to core")
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210823112204.243255-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: meson: sm1: add Ethernet PHY reset line for ODROID-C4/HC4

[ Upstream commit 9d02214f8332d5dbbcce3d6c5c915e54d43a0c46 ]

This patch is to fix an issue that the ethernet link doesn't come up
when using ip link set down/up:
   [   11.428114] meson8b-dwmac ff3f0000.ethernet eth0: Link is Down
   [   14.428595] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=31)
   [   14.428610] meson8b-dwmac ff3f0000.ethernet: Failed to reset the dma
   [   14.428974] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
   [   14.711185] meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Hw setup failed

This fix refers to two commits applied for ODROID-N2 (G12B).
    commit 658e4129bb81 ("arm64: dts: meson: g12b: odroid-n2: add the Ethernet PHY reset line")
    commit 1c7412530d5d0 ("arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements")

Fixes: 88d537bc92ca ("arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi")
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: added fixes tag and typo in commit log]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/YScKYFWlYymgGw3l@anyang-linuxfactory-or-kr
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: r8188eu: fix memory leak in rtw_set_key

[ Upstream commit 393db0f6827f96054a769ba3a38aa382d137d3c7 ]

Before returning with an error we should free allocated buffers, since
they are not assigned to anywhere.

Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/ee783fbb71abb549505b84542223be7a7c905eea.1630692375.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: Fix parameter in parse_perf_domain()

[ Upstream commit 4a08e3271c55f8b5d56906a8aa5bd041911cf897 ]

Pass cpu to parse_perf_domain() instead of pcpu.

Fixes: 8486a32dd484 ("cpufreq: Add of_perf_domain_get_sharing_cpumask")
Signed-off-by: Hector.Yuan <hector.yuan@mediatek.com>
[ Viresh: Massaged changelog ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: fix EXPECT text for gpio hog errors

[ Upstream commit e85860e5bc077865a04f0a88d0b0335d3200484a ]

The console message text for gpio hog errors does not match
what unittest expects.

Fixes: f4056e705b2ef ("of: unittest: add overlay gpio test to catch gpio hog problem")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211029013225.2048695-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.

[ Upstream commit 388e2c0b978339dee9b0a81a2e546f8979e021e2 ]

Similar to unsigned bounds propagation fix signed bounds.
The 'Fixes' tag is a hint. There is no security bug here.
The verifier was too conservative.

Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-2-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.

[ Upstream commit b9979db8340154526d9ab38a1883d6f6ba9b6d47 ]

Before this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0xffffffff))

After this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0x1))

While processing BPF_JLE the reg_set_min_max() would set true_reg->umax_value = 1
and call __reg_combine_64_into_32(true_reg).

Without the fix it would not pass the condition:
if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value))

since umin_value == 0 at this point.
Before commit 10bf4e83167c the umin was incorrectly ingored.
The commit 10bf4e83167c fixed the correctness issue, but pessimized
propagation of 64-bit min max into 32-bit min max and corresponding var_off.

Fixes: 10bf4e83167c ("bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: Fix rootcg cpu.stat guest double counting

[ Upstream commit 81c49d39aea8a10e6d05d3aa1cb65ceb721e19b0 ]

In account_guest_time in kernel/sched/cputime.c guest time is
attributed to both CPUTIME_NICE and CPUTIME_USER in addition to
CPUTIME_GUEST_NICE and CPUTIME_GUEST respectively. Therefore, adding
both to calculate usage results in double counting any guest time at
the rootcg.

Fixes: 936f2a70f207 ("cgroup: add cpu.stat file to root cgroup")
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

skmsg: Lose offset info in sk_psock_skb_ingress

[ Upstream commit 7303524e04af49a47991e19f895c3b8cdc3796c7 ]

If sockmap enable strparser, there are lose offset info in
sk_psock_skb_ingress(). If the length determined by parse_msg function is not
skb->len, the skb will be converted to sk_msg multiple times, and userspace
app will get the data multiple times.

Fix this by get the offset and length from strp_msg. And as Cong suggested,
add one bit in skb->_sk_redir to distinguish enable or disable strparser.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211029141216.211899-1-liujian56@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: mptcp: fix proto type in link_failure tests

[ Upstream commit 7c909a98042ce403c8497c5d6ff94dd53bdd2131 ]

In listener_ns, we should pass srv_proto argument to mptcp_connect command,
not cl_proto.

Fixes: 7d1e6f1639044 ("selftests: mptcp: add testcase for active-back")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: delay complete()

[ Upstream commit 6b278c0cb378079f3c0c61ae4a369c09ff1a4188 ]

If we get CRQ_INIT, we set errno to -EIO and first call complete() to
notify the waiter. Then we try to schedule a FAILOVER reset. If this
occurs while adapter is in PROBING state, ibmvnic_reset() changes the
error code to EAGAIN and returns without scheduling the FAILOVER. The
purpose of setting error code to EAGAIN is to ask the waiter to retry.

But due to the earlier complete() call, the waiter may already have seen
the -EIO response and decided not to retry. This can cause intermittent
failures when bringing up ibmvnic adapters during boot, specially in
in kexec/kdump kernels.

Defer the complete() call until after scheduling the reset.

Also streamline the error code to EAGAIN. Don't see why we need EIO
sometimes. All 3 callers of ibmvnic_reset_init() can handle EAGAIN.

Fixes: 17c8705838a5 ("ibmvnic: Return error code if init interrupted by transport event")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: Process crqs after enabling interrupts

[ Upstream commit 6e20d00158f31f7631d68b86996b7e951c4451c8 ]

Soon after registering a CRQ it is possible that we get a fail over or
maybe a CRQ_INIT from the VIOS while interrupts were disabled.

Look for any such CRQs after enabling interrupts.

Otherwise we can intermittently fail to bring up ibmvnic adapters during
boot, specially in kexec/kdump kernels.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ibmvnic: don't stop queue in xmit

[ Upstream commit 8878e46fcfd46b19964bd90e13b25dd94cbfc9be ]

If adapter's resetting bit is on, discard the packet but don't stop the
transmit queue - instead leave that to the reset code. With this change,
it is possible that we may get several calls to ibmvnic_xmit() that simply
discard packets and return.

But if we stop the queue here, we might end up doing so just after
__ibmvnic_open() started the queues (during a hard/soft reset) and before
the ->resetting bit was cleared. If that happens, there will be no one to
restart queue and transmissions will be blocked indefinitely.

This can cause a TIMEOUT reset and with auto priority failover enabled,
an unnecessary FAILOVER reset to less favored backing device and then a
FAILOVER back to the most favored backing device. If we hit the window
repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER
resets leaving the adapter unusable for extended periods of time.

Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit")
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp6: allow SO_MARK ctrl msg to affect routing

[ Upstream commit 42dcfd850e514b229d616a53dec06d0f2533217c ]

Commit c6af0c227a22 ("ip: support SO_MARK cmsg")
added propagation of SO_MARK from cmsg to skb->mark.
For IPv4 and raw sockets the mark also affects route
lookup, but in case of IPv6 the flow info is
initialized before cmsg is parsed.

Fixes: c6af0c227a22 ("ip: support SO_MARK cmsg")
Reported-and-tested-by: Xintong Hu <huxintong@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix fclose/pclose mismatch in test_progs

[ Upstream commit f48ad69097fe79d1de13c4d8fef556d4c11c5e68 ]

Make sure to use pclose() to properly close the pipe opened by popen().

Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211026143409.42666-1-andrea.righi@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: pcrypt - Delay write to padata->info

[ Upstream commit 68b6dea802cea0dbdd8bd7ccc60716b5a32a5d8a ]

These three events can race when pcrypt is used multiple times in a
template ("pcrypt(pcrypt(...))"):

  1.  [taskA] The caller makes the crypto request via crypto_aead_encrypt()
  2.  [kworkerB] padata serializes the inner pcrypt request
  3.  [kworkerC] padata serializes the outer pcrypt request

3 might finish before the call to crypto_aead_encrypt() returns in 1,
resulting in two possible issues.

First, a use-after-free of the crypto request's memory when, for
example, taskA writes to the outer pcrypt request's padata->info in
pcrypt_aead_enc() after kworkerC completes the request.

Second, the outer pcrypt request overwrites the inner pcrypt request's
return code with -EINPROGRESS, making a successful request appear to
fail.  For instance, kworkerB writes the outer pcrypt request's
padata->info in pcrypt_aead_done() and then taskA overwrites it
in pcrypt_aead_enc().

Avoid both situations by delaying the write of padata->info until after
the inner crypto request's return code is checked.  This prevents the
use-after-free by not touching the crypto request's memory after the
next-inner crypto request is made, and stops padata->info from being
overwritten.

Fixes: 5068c7a883d16 ("crypto: pcrypt - Add pcrypt crypto parallelization wrapper")
Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: net: bridge: update IGMP/MLD membership interval value

[ Upstream commit 34d7ecb3d4f772eb00ce1f7195ae30886ddf4d2e ]

When I fixed IGMPv3/MLDv2 to use the bridge's multicast_membership_interval
value which is chosen by user-space instead of calculating it based on
multicast_query_interval and multicast_query_response_interval I forgot
to update the selftests relying on that behaviour. Now we have to
manually set the expected GMI value to perform the tests correctly and get
proper results (similar to IGMPv2 behaviour).

Fixes: fac3cb82a54a ("net: bridge: mcast: use multicast_membership_interval for IGMPv3")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: fix uninitialized variables when BRIDGE_CFM is disabled

[ Upstream commit 829e050eea69c7442441b714b6f5b339b5b8c367 ]

Function br_get_link_af_size_filtered() calls br_cfm_{,peer}_mep_count()
that return a count. When BRIDGE_CFM is not enabled these functions
simply return -EOPNOTSUPP but do not modify count parameter and
calling function then works with uninitialized variables.
Modify these inline functions to return zero in count parameter.

Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.")
Cc: Henrik Bjoernlund <henrik.bjoernlund@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phylink: avoid mvneta warning when setting pause parameters

[ Upstream commit fd8d9731bcdfb22d28e45bce789bcb211c868c78 ]

mvneta does not support asymetric pause modes, and it flags this by the
lack of AsymPause in the supported field. When setting pause modes, we
check that pause->rx_pause == pause->tx_pause, but only when pause
autoneg is enabled. When pause autoneg is disabled, we still allow
pause->rx_pause != pause->tx_pause, which is incorrect when the MAC
does not support asymetric pause, and causes mvneta to issue a warning.

Fix this by removing the test for pause->autoneg, so we always check
that pause->rx_pause == pause->tx_pause for network devices that do not
support AsymPause.

Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: fix potential deadlock when canceling dim work

[ Upstream commit 17e712c6a1bade9dac02a7bf2b464746faa7e9a0 ]

When port is linked down, the process which has acquired rtnl_lock
will wait for the in-progress dim work to finish, and the work also
acquires rtnl_lock, which may cause deadlock.

Currently IRQ_MOD registers can be configured by `ethtool -C` and
dim work, and which will take effect depends on the execution order,
rtnl_lock is useless here, so remove them.

Fixes: 9d32e4e7e9e1 ("nfp: add support for coalesce adaptive feature")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: fix NULL pointer access when scheduling dim work

[ Upstream commit f8d384a640dd32aaf0a05fec137ccbf0e986b09f ]

Each rx/tx ring has a related dim work, when rx/tx ring number is
decreased by `ethtool -L`, the corresponding rx_ring or tx_ring is
assigned NULL, while its related work is not destroyed. When scheduled,
the work will access NULL pointer.

Fixes: 9d32e4e7e9e1 ("nfp: add support for coalesce adaptive feature")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: kcs_bmc: Fix a memory leak in the error handling path of 'kcs_bmc_serio_add_device()'

[ Upstream commit f281d010b87454e72475b668ad66e34961f744e0 ]

In the unlikely event where 'devm_kzalloc()' fails and 'kzalloc()'
succeeds, 'port' would be leaking.

Test each allocation separately to avoid the leak.

Fixes: 3a3d2f6a4c64 ("ipmi: kcs_bmc: Add serio adaptor")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <ecbfa15e94e64f4b878ecab1541ea46c74807670.1631048724.git.christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: amd-xgbe: Toggle PLL settings during rate change

[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]

For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.

Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.

Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: return true only for pathmtu update in sctp_transport_pl_toobig

[ Upstream commit 75cf662c64dd8543f56c329c69eba18141c8fd9f ]

sctp_transport_pl_toobig() supposes to return true only if there's
pathmtu update, so that in sctp_icmp_frag_needed() it would call
sctp_assoc_sync_pmtu() and sctp_retransmit(). This patch is to fix
these return places in sctp_transport_pl_toobig().

Fixes: 836964083177 ("sctp: do state transition when receiving an icmp TOOBIG packet")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: subtract sctphdr len in sctp_transport_pl_hlen

[ Upstream commit cc4665ca646c96181a7c00198aa72c59e0c576e8 ]

sctp_transport_pl_hlen() is called to calculate the outer header length
for PL. However, as the Figure in rfc8899#section-4.4:

   Any additional
     headers         .--- MPS -----.
            |        |             |
            v        v             v
     +------------------------------+
     | IP | ** | PL | protocol data |
     +------------------------------+

                <----- PLPMTU ----->
     <---------- PMTU -------------->

Outer header are IP + Any additional headers, which doesn't include
Packetization Layer itself header, namely sctphdr, whereas sctphdr
is counted by __sctp_mtu_payload().

The incorrect calculation caused the link pathmtu to be set larger
than expected by t->pl.pmtu + sctp_transport_pl_hlen(). This patch
is to fix it by subtracting sctphdr len in sctp_transport_pl_hlen().

Fixes: d9e2e410ae30 ("sctp: add the constants/variables and states and some APIs for transport")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: reset probe_timer in sctp_transport_pl_update

[ Upstream commit c6ea04ea692fa0d8e7faeb133fcd28e3acf470a0 ]

sctp_transport_pl_update() is called when transport update its dst and
pathmtu, instead of stopping the PLPMTUD probe timer, PLPMTUD should
start over and reset the probe timer. Otherwise, the PLPMTUD service
would stop.

Fixes: 92548ec2f1f9 ("sctp: add the probe timer in transport for PLPMTUD")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: allow IP fragmentation when PLPMTUD enters Error state

[ Upstream commit 40171248bb8934537fec8fbaf718e57c8add187c ]

Currently when PLPMTUD enters Error state, transport pathmtu will be set
to MIN_PLPMTU(512) while probe is continuing with BASE_PLPMTU(1200). It
will cause pathmtu to stay in a very small value, even if the real pmtu
is some value like 1000.

RFC8899 doesn't clearly say how to set the value in Error state. But one
possibility could be keep using BASE_PLPMTU for the real pmtu, but allow
to do IP fragmentation when it's in Error state.

As it says in rfc8899#section-5.4:

   Some paths could be unable to sustain packets of the BASE_PLPMTU
   size.  The Error State could be implemented to provide robustness to
   such paths.  This allows fallback to a smaller than desired PLPMTU
   rather than suffer connectivity failure.  This could utilize methods
   such as endpoint IP fragmentation to enable the PL sender to
   communicate using packets smaller than the BASE_PLPMTU.

This patch is to set pmtu to BASE_PLPMTU instead of MIN_PLPMTU for Error
state in sctp_transport_pl_send/toobig(), and set packet ipfragok for
non-probe packets when it's in Error state.

Fixes: 1dc68c194571 ("sctp: do state transition when PROBE_COUNT == MAX_PROBES on HB send path")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix memory leak in test_ima

[ Upstream commit efadf2ad17a2d5dc90bda4e6e8b2f96af4c62dae ]

The allocated ring buffer is never freed, do so in the cleanup path.

Fixes: f446b570ac7e ("bpf/selftests: Update the IMA test to use BPF ring buffer")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-9-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix fd cleanup in sk_lookup test

[ Upstream commit c3fc706e94f5653def2783ffcd809a38676b7551 ]

Similar to the fix in commit:
e31eec77e4ab ("bpf: selftests: Fix fd cleanup in get_branch_snapshot")

We use designated initializer to set fds to -1 without breaking on
future changes to MAX_SERVER constant denoting the array size.

The particular close(0) occurs on non-reuseport tests, so it can be seen
with -n 115/{2,3} but not 115/4. This can cause problems with future
tests if they depend on BTF fd never being acquired as fd 0, breaking
internal libbpf assumptions.

Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-8-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/gmc6: fix DMA mask from 44 to 40 bits

[ Upstream commit 403475be6d8b122c3e6b8a47e075926d7299e5ef ]

The DMA mask on SI parts is 40 bits not 44.  Copy
paste typo.

Fixes: 244511f386ccb9 ("drm/amdgpu: simplify and cleanup setting the dma mask")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1762
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix a potential memory leak in amdgpu_device_fini_sw()

[ Upstream commit a5c5d8d50ecf5874be90a76e1557279ff8a30c9e ]

amdgpu_fence_driver_sw_fini() should be executed before
amdgpu_device_ip_fini(), otherwise fence driver resource
won't be properly freed as adev->rings have been tore down.

Fixes: 72c8c97b1522 ("drm/amdgpu: Split amdgpu_device_fini into early and late")

Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wcn36xx: Channel list update before hardware scan

[ Upstream commit d707f812bb0513ea0030d0c9fe2a456bae5a4583 ]

The channel scan list must be updated before triggering a hardware scan
so that firmware takes into account the regulatory info for each single
channel such as active/passive config, power, DFS, etc... Without this
the firmware uses its own internal default channel configuration, which
is not aligned with mac80211 regulatory rules, and misses several
channels (e.g. 144).

Fixes: 2f3bef4b247e ("wcn36xx: Add hardware scan offload support")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635175328-25642-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fixes possible race in update_prog_stats() for 32bit arches

[ Upstream commit d979617aa84d96acca44c2f5778892b4565e322f ]

It seems update_prog_stats() suffers from same issue fixed
in the prior patch:

As it can run while interrupts are enabled, it could
be re-entered and the u64_stats syncp could be mangled.

Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-3-eric.dumazet@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Avoid races in __bpf_prog_run() for 32bit arches

[ Upstream commit f941eadd8d6d4ee2f8c9aeab8e1da5e647533a7d ]

__bpf_prog_run() can run from non IRQ contexts, meaning
it could be re entered if interrupted.

This calls for the irq safe variant of u64_stats_update_{begin|end},
or risk a deadlock.

This patch is a nop on 64bit arches, fortunately.

syzbot report:

WARNING: inconsistent lock state
5.12.0-rc3-syzkaller #0 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
udevd/4013 [HC0[0]:SC0[0]:HE1:SE1] takes:
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: sk_filter include/linux/filter.h:867 [inline]
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: do_one_broadcast net/netlink/af_netlink.c:1468 [inline]
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: netlink_broadcast_filtered+0x27c/0x4fc net/netlink/af_netlink.c:1520
{IN-SOFTIRQ-W} state was registered at:
  lock_acquire.part.0+0xf0/0x41c kernel/locking/lockdep.c:5510
  lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5483
  do_write_seqcount_begin_nested include/linux/seqlock.h:520 [inline]
  do_write_seqcount_begin include/linux/seqlock.h:545 [inline]
  u64_stats_update_begin include/linux/u64_stats_sync.h:129 [inline]
  bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline]
  bpf_prog_run_clear_cb+0x1bc/0x270 include/linux/filter.h:755
  run_filter+0xa0/0x17c net/packet/af_packet.c:2031
  packet_rcv+0xc0/0x3e0 net/packet/af_packet.c:2104
  dev_queue_xmit_nit+0x2bc/0x39c net/core/dev.c:2387
  xmit_one net/core/dev.c:3588 [inline]
  dev_hard_start_xmit+0x94/0x518 net/core/dev.c:3609
  sch_direct_xmit+0x11c/0x1f0 net/sched/sch_generic.c:313
  qdisc_restart net/sched/sch_generic.c:376 [inline]
  __qdisc_run+0x194/0x7f8 net/sched/sch_generic.c:384
  qdisc_run include/net/pkt_sched.h:136 [inline]
  qdisc_run include/net/pkt_sched.h:128 [inline]
  __dev_xmit_skb net/core/dev.c:3795 [inline]
  __dev_queue_xmit+0x65c/0xf84 net/core/dev.c:4150
  dev_queue_xmit+0x14/0x18 net/core/dev.c:4215
  neigh_resolve_output net/core/neighbour.c:1491 [inline]
  neigh_resolve_output+0x170/0x228 net/core/neighbour.c:1471
  neigh_output include/net/neighbour.h:510 [inline]
  ip6_finish_output2+0x2e4/0x9fc net/ipv6/ip6_output.c:117
  __ip6_finish_output net/ipv6/ip6_output.c:182 [inline]
  __ip6_finish_output+0x164/0x3f8 net/ipv6/ip6_output.c:161
  ip6_finish_output+0x2c/0xb0 net/ipv6/ip6_output.c:192
  NF_HOOK_COND include/linux/netfilter.h:290 [inline]
  ip6_output+0x74/0x294 net/ipv6/ip6_output.c:215
  dst_output include/net/dst.h:448 [inline]
  NF_HOOK include/linux/netfilter.h:301 [inline]
  NF_HOOK include/linux/netfilter.h:295 [inline]
  mld_sendpack+0x2a8/0x7e4 net/ipv6/mcast.c:1679
  mld_send_cr net/ipv6/mcast.c:1975 [inline]
  mld_ifc_timer_expire+0x1e8/0x494 net/ipv6/mcast.c:2474
  call_timer_fn+0xd0/0x570 kernel/time/timer.c:1431
  expire_timers kernel/time/timer.c:1476 [inline]
  __run_timers kernel/time/timer.c:1745 [inline]
  run_timer_softirq+0x2e4/0x384 kernel/time/timer.c:1758
  __do_softirq+0x204/0x7ac kernel/softirq.c:345
  do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline]
  invoke_softirq kernel/softirq.c:228 [inline]
  __irq_exit_rcu+0x1d8/0x200 kernel/softirq.c:422
  irq_exit+0x10/0x3c kernel/softirq.c:446
  __handle_domain_irq+0xb4/0x120 kernel/irq/irqdesc.c:692
  handle_domain_irq include/linux/irqdesc.h:176 [inline]
  gic_handle_irq+0x84/0xac drivers/irqchip/irq-gic.c:370
  __irq_svc+0x5c/0x94 arch/arm/kernel/entry-armv.S:205
  debug_smp_processor_id+0x0/0x24 lib/smp_processor_id.c:53
  rcu_read_lock_held_common kernel/rcu/update.c:108 [inline]
  rcu_read_lock_sched_held+0x24/0x7c kernel/rcu/update.c:123
  trace_lock_acquire+0x24c/0x278 include/trace/events/lock.h:13
  lock_acquire+0x3c/0x74 kernel/locking/lockdep.c:5481
  rcu_lock_acquire include/linux/rcupdate.h:267 [inline]
  rcu_read_lock include/linux/rcupdate.h:656 [inline]
  avc_has_perm_noaudit+0x6c/0x260 security/selinux/avc.c:1150
  selinux_inode_permission+0x140/0x220 security/selinux/hooks.c:3141
  security_inode_permission+0x44/0x60 security/security.c:1268
  inode_permission.part.0+0x5c/0x13c fs/namei.c:521
  inode_permission fs/namei.c:494 [inline]
  may_lookup fs/namei.c:1652 [inline]
  link_path_walk.part.0+0xd4/0x38c fs/namei.c:2208
  link_path_walk fs/namei.c:2189 [inline]
  path_lookupat+0x3c/0x1b8 fs/namei.c:2419
  filename_lookup+0xa8/0x1a4 fs/namei.c:2453
  user_path_at_empty+0x74/0x90 fs/namei.c:2733
  do_readlinkat+0x5c/0x12c fs/stat.c:417
  __do_sys_readlink fs/stat.c:450 [inline]
  sys_readlink+0x24/0x28 fs/stat.c:447
  ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64
  0x7eaa4974
irq event stamp: 298277
hardirqs last  enabled at (298277): [<802000d0>] no_work_pending+0x4/0x34
hardirqs last disabled at (298276): [<8020c9b8>] do_work_pending+0x9c/0x648 arch/arm/kernel/signal.c:676
softirqs last  enabled at (298216): [<8020167c>] __do_softirq+0x584/0x7ac kernel/softirq.c:372
softirqs last disabled at (298201): [<8024dff4>] do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline]
softirqs last disabled at (298201): [<8024dff4>] invoke_softirq kernel/softirq.c:228 [inline]
softirqs last disabled at (298201): [<8024dff4>] __irq_exit_rcu+0x1d8/0x200 kernel/softirq.c:422

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&pstats->syncp)->seq);
  <Interrupt>
    lock(&(&pstats->syncp)->seq);

 *** DEADLOCK ***

1 lock held by udevd/4013:
 #0: 82b09c5c (rcu_read_lock){....}-{1:2}, at: sk_filter_trim_cap+0x54/0x434 net/core/filter.c:139

stack backtrace:
CPU: 1 PID: 4013 Comm: udevd Not tainted 5.12.0-rc3-syzkaller #0
Hardware name: ARM-Versatile Express
Backtrace:
[<81802550>] (dump_backtrace) from [<818027c4>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
 r7:00000080 r6:600d0093 r5:00000000 r4:82b58344
[<818027ac>] (show_stack) from [<81809e98>] (__dump_stack lib/dump_stack.c:79 [inline])
[<818027ac>] (show_stack) from [<81809e98>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120)
[<81809de0>] (dump_stack) from [<81804a00>] (print_usage_bug.part.0+0x228/0x230 kernel/locking/lockdep.c:3806)
 r7:86bcb768 r6:81a0326c r5:830f96a8 r4:86bcb0c0
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (print_usage_bug kernel/locking/lockdep.c:3776 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (valid_state kernel/locking/lockdep.c:3818 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (mark_lock_irq kernel/locking/lockdep.c:4021 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (mark_lock.part.0+0xc34/0x136c kernel/locking/lockdep.c:4478)
 r10:83278fe8 r9:82c6d748 r8:00000000 r7:82c6d2d4 r6:00000004 r5:86bcb768
 r4:00000006
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (mark_lock kernel/locking/lockdep.c:4442 [inline])
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (mark_usage kernel/locking/lockdep.c:4391 [inline])
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (__lock_acquire+0x9bc/0x3318 kernel/locking/lockdep.c:4854)
 r10:86bcb768 r9:86bcb0c0 r8:00000001 r7:00040000 r6:0000075a r5:830f96a8
 r4:00000000
[<802bbc88>] (__lock_acquire) from [<802bfb90>] (lock_acquire.part.0+0xf0/0x41c kernel/locking/lockdep.c:5510)
 r10:00000000 r9:600d0013 r8:00000000 r7:00000000 r6:828a2680 r5:828a2680
 r4:861e5bc8
[<802bfaa0>] (lock_acquire.part.0) from [<802bff28>] (lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5483)
 r10:8146137c r9:00000000 r8:00000001 r7:00000000 r6:00000000 r5:00000000
 r4:ff7c9dec
[<802bfebc>] (lock_acquire) from [<81381eb4>] (do_write_seqcount_begin_nested include/linux/seqlock.h:520 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (do_write_seqcount_begin include/linux/seqlock.h:545 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (u64_stats_update_begin include/linux/u64_stats_sync.h:129 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (__bpf_prog_run_save_cb include/linux/filter.h:727 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (bpf_prog_run_save_cb include/linux/filter.h:741 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (sk_filter_trim_cap+0x26c/0x434 net/core/filter.c:149)
 r10:a4095dd0 r9:ff7c9dd0 r8:e44be000 r7:8146137c r6:00000001 r5:8611ba80
 r4:00000000
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (sk_filter include/linux/filter.h:867 [inline])
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (do_one_broadcast net/netlink/af_netlink.c:1468 [inline])
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (netlink_broadcast_filtered+0x27c/0x4fc net/netlink/af_netlink.c:1520)
 r10:00000001 r9:833d6b1c r8:00000000 r7:8572f864 r6:8611ba80 r5:8698d800
 r4:8572f800
[<81461100>] (netlink_broadcast_filtered) from [<81463e60>] (netlink_broadcast net/netlink/af_netlink.c:1544 [inline])
[<81461100>] (netlink_broadcast_filtered) from [<81463e60>] (netlink_sendmsg+0x3d0/0x478 net/netlink/af_netlink.c:1925)
 r10:00000000 r9:00000002 r8:8698d800 r7:000000b7 r6:8611b900 r5:861e5f50
 r4:86aa3000
[<81463a90>] (netlink_sendmsg) from [<81321f54>] (sock_sendmsg_nosec net/socket.c:654 [inline])
[<81463a90>] (netlink_sendmsg) from [<81321f54>] (sock_sendmsg+0x3c/0x4c net/socket.c:674)
 r10:00000000 r9:861e5dd4 r8:00000000 r7:86570000 r6:00000000 r5:86570000
 r4:861e5f50
[<81321f18>] (sock_sendmsg) from [<813234d0>] (____sys_sendmsg+0x230/0x29c net/socket.c:2350)
 r5:00000040 r4:861e5f50
[<813232a0>] (____sys_sendmsg) from [<8132549c>] (___sys_sendmsg+0xac/0xe4 net/socket.c:2404)
 r10:00000128 r9:861e4000 r8:00000000 r7:00000000 r6:86570000 r5:861e5f50
 r4:00000000
[<813253f0>] (___sys_sendmsg) from [<81325684>] (__sys_sendmsg net/socket.c:2433 [inline])
[<813253f0>] (___sys_sendmsg) from [<81325684>] (__do_sys_sendmsg net/socket.c:2442 [inline])
[<813253f0>] (___sys_sendmsg) from [<81325684>] (sys_sendmsg+0x58/0xa0 net/socket.c:2440)
 r8:80200224 r7:00000128 r6:00000000 r5:7eaa541c r4:86570000
[<8132562c>] (sys_sendmsg) from [<80200060>] (ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64)
Exception stack(0x861e5fa8 to 0x861e5ff0)
5fa0:                   00000000 00000000 0000000c 7eaa541c 00000000 00000000
5fc0: 00000000 00000000 76fbf840 00000128 00000000 0000008f 7eaa541c 000563f8
5fe0: 00056110 7eaa53e0 00036cec 76c9bf44
 r6:76fbf840 r5:00000000 r4:00000000

Fixes: 492ecee892c2 ("bpf: enable program stats")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-2-eric.dumazet@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wcn36xx: Fix discarded frames due to wrong sequence number

[ Upstream commit 113f304dbc1627c6ec9d5329d839964095768980 ]

The firmware is offering features such as ARP offload, for which
firmware crafts its own (QoS)packets without waking up the host.
Point is that the sequence numbers generated by the firmware are
not in sync with the host mac80211 layer and can cause packets
such as firmware ARP reponses to be dropped by the AP (too old SN).

To fix this we need to let the firmware manages the sequence
numbers by its own (except for QoS null frames). There is a SN
counter for each QoS queue and one global/baseline counter for
Non-QoS.

Fixes: 84aff52e4f57 ("wcn36xx: Use sequence number allocated by mac80211")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635150336-18736-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>