review.tizen.org Git - platform/kernel/linux-starfive.git/log

mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450

[ Upstream commit 5ae4b0d8875caa44946e579420c7fd5740d58653 ]

Errata ERR010450 only shows up if voltage is 1.8V, but if the device is
supplied by 3v3 the errata can be ignored. So let's check for if quirk
SDHCI_QUIRK2_NO_1_8_V is defined or not before limiting the frequency.

Cc: Jim Reinhart <jimr@tekvox.com>
Cc: James Autry <jautry@tekvox.com>
Cc: Matthew Maron <matthewm@tekvox.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230811214853.8623-1-giulio.benetti@benettiengineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm_tis: Resend command to recover from data transfer errors

[ Upstream commit 280db21e153d8810ce3b93640c63ae922bcb9e8e ]

Similar to the transmission of TPM responses, also the transmission of TPM
commands may become corrupted. Instead of aborting when detecting such
issues, try resending the command again.

Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: convert nlk->flags to atomic flags

[ Upstream commit 8fe08d70a2b61b35a0a1235c78cf321e7528351f ]

sk_diag_put_flags(), netlink_setsockopt(), netlink_getsockopt()
and others use nlk->flags without correct locking.

Use set_bit(), clear_bit(), test_bit(), assign_bit() to remove
data-races.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix hci_suspend_sync crash

[ Upstream commit 573ebae162111063eedc6c838a659ba628f66a0f ]

If hci_unregister_dev() frees the hci_dev object but hci_suspend_notifier
may still be accessing it, it can cause the program to crash.
Here's the call trace:
  <4>[102152.653246] Call Trace:
  <4>[102152.653254]  hci_suspend_sync+0x109/0x301 [bluetooth]
  <4>[102152.653259]  hci_suspend_dev+0x78/0xcd [bluetooth]
  <4>[102152.653263]  hci_suspend_notifier+0x42/0x7a [bluetooth]
  <4>[102152.653268]  notifier_call_chain+0x43/0x6b
  <4>[102152.653271]  __blocking_notifier_call_chain+0x48/0x69
  <4>[102152.653273]  __pm_notifier_call_chain+0x22/0x39
  <4>[102152.653276]  pm_suspend+0x287/0x57c
  <4>[102152.653278]  state_store+0xae/0xe5
  <4>[102152.653281]  kernfs_fop_write+0x109/0x173
  <4>[102152.653284]  __vfs_write+0x16f/0x1a2
  <4>[102152.653287]  ? selinux_file_permission+0xca/0x16f
  <4>[102152.653289]  ? security_file_permission+0x36/0x109
  <4>[102152.653291]  vfs_write+0x114/0x21d
  <4>[102152.653293]  __x64_sys_write+0x7b/0xdb
  <4>[102152.653296]  do_syscall_64+0x59/0x194
  <4>[102152.653299]  entry_SYSCALL_64_after_hwframe+0x5c/0xc1

This patch holds the reference count of the hci_dev object while
processing it in hci_suspend_notifier to avoid potential crash
caused by the race condition.

Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui()

[ Upstream commit 9e47a758b70167c9301d2b44d2569f86c7796f2d ]

During NVMeTCP Authentication a controller can trigger a kernel
oops by specifying the 8192 bit Diffie Hellman group and passing
a correctly sized, but zeroed Diffie Hellamn value.
mpi_cmp_ui() was detecting this if the second parameter was 0,
but 1 is passed from dh_is_pubkey_valid(). This causes the null
pointer u->d to be dereferenced towards the end of mpi_cmp_ui()

Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ipv4: return the real errno instead of -EINVAL

[ Upstream commit c67180efc507e04a87f22aa68bd7dd832db006b7 ]

For now, No matter what error pointer ip_neigh_for_gw() returns,
ip_finish_output2() always return -EINVAL, which may mislead the upper
users.

For exemple, an application uses sendto to send an UDP packet, but when the
neighbor table overflows, sendto() will get a value of -EINVAL, and it will
cause users to waste a lot of time checking parameters for errors.

Return the real errno instead of -EINVAL.

Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Si Hao <si.hao@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20230807015408.248237-1-xu.xin16@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Use sockaddr_storage for getsockopt(SO_PEERNAME).

[ Upstream commit 8936bf53a091ad6a34b480c22002f1cb2422ab38 ]

Commit df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") started
applying strict rules to standard string functions.

It does not work well with conventional socket code around each protocol-
specific sockaddr_XXX struct, which is cast from sockaddr_storage and has
a bigger size than fortified functions expect. See these commits:

commit 06d4c8a80836 ("af_unix: Fix fortify_panic() in unix_bind_bsd().")
commit ecb4534b6a1c ("af_unix: Terminate sun_path when bind()ing pathname socket.")
commit a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname().")

We must cast the protocol-specific address back to sockaddr_storage
to call such functions.

However, in the case of getsockaddr(SO_PEERNAME), the rationale is a bit
unclear as the buffer is defined by char[128] which is the same size as
sockaddr_storage.

Let's use sockaddr_storage explicitly.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: sun4i_can: Add support for the Allwinner D1

[ Upstream commit 8abb95250ae6af2d51993da8fcae18da2ce24cc4 ]

The controllers present in the D1 are extremely similar to the R40
and require the same reset quirks, but An extra quirk is needed to support
receiving packets.

Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-6-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: sun4i_can: Add acceptance register quirk

[ Upstream commit 8cda0c6dfd42ee6f2586e7dffb553aaf1fcb62ca ]

The Allwinner D1's CAN controllers have the ACPC and ACPM registers
moved down. Compensate for this by adding an offset quirk for the
acceptance registers.

Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/all/20230721221552.1973203-5-contact@jookia.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: wil6210: fix fortify warnings

[ Upstream commit 1ad8237e971630c66a1a6194491e0837b64d00e0 ]

When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:

In function ‘fortify_memcpy_chk’,
    inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

where the compiler complains on:

const u8 *pn;
...
pn = (u8 *)&st->ext.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);

and:

In function ‘fortify_memcpy_chk’,
    inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

where the compiler complains on:

const u8 *pn = (u8 *)&d->mac.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);

In both cases, the fortification logic interprets 'memcpy()' as 6-byte
overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension'
and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence
these warnings, last two fields of the aforementioned structures
are grouped using 'struct_group_attr(pn, __packed' quirk.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230621093711.80118-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: don't assume adequate headroom for SDIO headers

[ Upstream commit 98c4d0abf5c478db1ad126ff0c187dbb84c0803c ]

mt7921_usb_sdio_tx_prepare_skb() calls mt7921_usb_sdio_write_txwi() and
mt7921_skb_add_usb_sdio_hdr(), both of which blindly assume that
adequate headroom will be available in the passed skb. This assumption
typically is satisfied when the skb was allocated in the net core for
transmission via the mt7921 netdev (although even that is only an
optimization and is not strictly guaranteed), but the assumption is
sometimes not satisfied when the skb originated in the receive path of
another netdev and was passed through to the mt7921, such as by the
bridge layer. Blindly prepending bytes to an skb is always wrong.

This commit introduces a call to skb_cow_head() before the call to
mt7921_usb_sdio_write_txwi() in mt7921_usb_sdio_tx_prepare_skb() to
ensure that at least MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE bytes can be
pushed onto the skb.

Without this fix, I can trivially cause kernel panics by bridging an
MT7921AU-based USB 802.11ax interface with an Ethernet interface on an
Intel Atom-based x86 system using its onboard RTL8169 PCI Ethernet
adapter and also on an ARM-based Raspberry Pi 1 using its onboard
SMSC9512 USB Ethernet adapter. Note that the panics do not occur in
every system configuration, as they occur only if the receiving netdev
leaves less headroom in its received skbs than the mt7921 needs for its
SDIO headers.

Here is an example stack trace of this panic on Raspberry Pi OS Lite
2023-02-21 running kernel 6.1.24+ [1]:

skb_panic from skb_push+0x44/0x48
skb_push from mt7921_usb_sdio_tx_prepare_skb+0xd4/0x190 [mt7921_common]
mt7921_usb_sdio_tx_prepare_skb [mt7921_common] from mt76u_tx_queue_skb+0x94/0x1d0 [mt76_usb]
mt76u_tx_queue_skb [mt76_usb] from __mt76_tx_queue_skb+0x4c/0xc8 [mt76]
__mt76_tx_queue_skb [mt76] from mt76_txq_schedule.part.0+0x13c/0x398 [mt76]
mt76_txq_schedule.part.0 [mt76] from mt76_txq_schedule_all+0x24/0x30 [mt76]
mt76_txq_schedule_all [mt76] from mt7921_tx_worker+0x58/0xf4 [mt7921_common]
mt7921_tx_worker [mt7921_common] from __mt76_worker_fn+0x9c/0xec [mt76]
__mt76_worker_fn [mt76] from kthread+0xbc/0xe0
kthread from ret_from_fork+0x14/0x34

After this fix, bridging the mt7921 interface works fine on both of my
previously problematic systems.

[1] https://github.com/raspberrypi/firmware/tree/5c276f55a4b21345cd4d6200a504ee991851ff7a

Link: https://github.com/openwrt/openwrt/issues/11796
Signed-off-by: Matt Whitlock <kernel@mattwhitlock.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: fix fortify warning

[ Upstream commit dcce94b80a954a8968ff29fafcfb066d6197fa9a ]

When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:

In function ‘fortify_memcpy_chk’,
    inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3,
    inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:856:6:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The compiler actually complains on:

memmove(pos + ETH_ALEN, &mgmt->u.action.category,
sizeof(mgmt->u.action.u.tdls_discover_resp));

and it happens because the fortification logic interprets this
as an attempt to overread 1-byte 'u.action.category' member of
'struct ieee80211_mgmt'. To silence this warning, it's enough
to pass an address of 'u.action' itself instead of an address
of its first member.

This also fixes an improper usage of 'sizeof()'. Since 'skb' is
extended with 'sizeof(mgmt->u.action.u.tdls_discover_resp) + 1'
bytes (where 1 is actually 'sizeof(mgmt->u.action.category)'),
I assume that the same number of bytes should be copied.

Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230629085115.180499-2-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: fix printk specifier

[ Upstream commit 061115fbfb2ce5870c9a004d68dc63138c07c782 ]

Smatch reports:

ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer
ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer

Fix it by modifying %lx to %p in the printk format string.

Note that with this change, the pointer address will be printed as a
hashed value by default. This is appropriate because the kernel
should not leak kernel pointers to user space in an informational
message. If someone wants to see the real address for debugging
purposes, this can be achieved with the no_hash_pointers kernel option.

Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230723040403.296723-1-dzm91@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: fix fortify warnings

[ Upstream commit 810e41cebb6c6e394f2068f839e1a3fc745a5dcc ]

When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:

In function ‘fortify_memcpy_chk’,
    inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:556:4,
    inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In function ‘fortify_memcpy_chk’,
    inlined from ‘ath_tx_count_frames’ at drivers/net/wireless/ath/ath9k/xmit.c:473:3,
    inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:572:2,
    inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In both cases, the compiler complains on:

memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);

which is the legal way to copy both 'ba_low' and following 'ba_high'
members of 'struct ath_tx_status' at once (that is, issue one 8-byte
'memcpy()' for two 4-byte fields). Since the fortification logic seems
interprets this trick as an attempt to overread 4-byte 'ba_low', silence
relevant warnings by using the convenient 'struct_group()' quirk.

Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230620080855.396851-2-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Don't tx before switchdev is fully configured

[ Upstream commit 7aa529a69e92b9aff585e569d5003f7c15d8d60b ]

There is possibility that ice_eswitch_port_start_xmit might be
called while some resources are still not allocated which might
cause NULL pointer dereference. Fix this by checking if switchdev
configuration was finished.

Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: lrw,xts - Replace strlcpy with strscpy

[ Upstream commit babb80b3ecc6f40c962e13c654ebcd27f25ee327 ]

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

devlink: remove reload failed checks in params get/set callbacks

[ Upstream commit 633d76ad01ad0321a1ace3e5cc4fed06753d7ac4 ]

The checks in question were introduced by:
commit 6b4db2e528f6 ("devlink: Fix use-after-free after a failed reload").
That fixed an issue of reload with mlxsw driver.

Back then, that was a valid fix, because there was a limitation
in place that prevented drivers from registering/unregistering params
when devlink instance was registered.

It was possible to do the fix differently by changing drivers to
register/unregister params in appropriate places making sure the ops
operate only on memory which is allocated and initialized. But that,
as a dependency, would require to remove the limitation mentioned above.

Eventually, this limitation was lifted by:
commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance")

Also, the alternative fix (which also fixed another issue) was done by:
commit 74cbc3c03c82 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code").

Therefore, the checks are no longer relevant. Each driver should make
sure to have the params registered only when the memory the ops
are working with is allocated and initialized.

So remove the checks.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/nolibc: fix up kernel parameters support

[ Upstream commit c388c9920da2679f62bec48d00ca9e80e9d0a364 ]

kernel parameters allow pass two types of strings, one type is like
'noapic', another type is like 'panic=5', the first type is passed as
arguments of the init program, the second type is passed as environment
variables of the init program.

when users pass kernel parameters like this:

    noapic NOLIBC_TEST=syscall

our nolibc-test program will use the test setting from argv[1] and
ignore the one from NOLIBC_TEST environment variable, and at last, it
will print the following line and ignore the whole test setting.

    Ignoring unknown test name 'noapic'

reversing the parsing order does solve the above issue:

    test = getenv("NOLIBC_TEST");
    if (test)
        test = argv[1];

but it still doesn't work with such kernel parameters (without
NOLIBC_TEST environment variable):

    noapic FOO=bar

To support all of the potential kernel parameters, let's verify the test
setting from both of argv[1] and NOLIBC_TEST environment variable.

Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects

[ Upstream commit 883cf0d4cf288313b71146ddebdf5d647b76c78b ]

If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE`
objects while evaluating the AMD LPS0 _DSM, there will be a memory
leak. Explicitly guard against this.

Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hw_breakpoint: fix single-stepping when using bpf_overflow_handler

[ Upstream commit d11a69873d9a7435fe6a48531e165ab80a8b1221 ]

Arm platforms use is_default_overflow_handler() to determine if the
hw_breakpoint code should single-step over the breakpoint trigger or
let the custom handler deal with it.

Since bpf_overflow_handler() currently isn't recognized as a default
handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes
it to keep firing (the instruction triggering the data abort exception
is never skipped). For example:

  # bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test
  Attaching 1 probe...
  hit
  hit
  [...]
  ^C

(./test performs a single 4-byte store to 0x10000)

This patch replaces the check with uses_default_overflow_handler(),
which accounts for the bpf_overflow_handler() case by also testing
if one of the perf_event_output functions gets invoked indirectly,
via orig_default_handler.

Signed-off-by: Tomislav Novak <tnovak@meta.com>
Tested-by: Samuel Gosselin <sgosselin@google.com> # arm64
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/
Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/imx_ddr: speed up overflow frequency of cycle

[ Upstream commit e89ecd8368860bf05437eabd07d292c316221cfc ]

For i.MX8MP, we cannot ensure that cycle counter overflow occurs at least
4 times as often as other events. Due to byte counters will count for any
event configured, it will overflow more often. And if byte counters
overflow that related counters would stop since they share the
COUNTER_CNTL. We can speed up cycle counter overflow frequency by setting
counter parameter (CP) field of cycle counter. In this way, we can avoid
stop counting byte counters when interrupt didn't come and the byte
counters can be fetched or updated from each cycle counter overflow
interrupt.

Because we initialize CP filed to shorten counter0 overflow time, the cycle
counter will start couting from a fixed/base value each time. We need to
remove the base from the result too. Therefore, we could get precise result
from cycle counter.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-1-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09

[ Upstream commit 0242737dc4eb9f6e9a5ea594b3f93efa0b12f28d ]

Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.

This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470

[ Upstream commit 96b709be183c56293933ef45b8b75f8af268c6de ]

The Lenovo Ideapad Z470 predates Windows 8, so it defaults to using
acpi_video for backlight control. But this is not functional on this
model.

Add a DMI quirk to use the native backlight interface which works.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1208724
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scftorture: Forgive memory-allocation failure if KASAN

[ Upstream commit 013608cd0812bdb21fc26d39ed8fdd2fc76e8b9b ]

Kernels built with CONFIG_KASAN=y quarantine newly freed memory in order
to better detect use-after-free errors. However, this can exhaust memory
more quickly in allocator-heavy tests, which can result in spurious
scftorture failure. This commit therefore forgives memory-allocation
failure in kernels built with CONFIG_KASAN=y, but continues counting
the errors for use in detailed test-result analyses.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle()

[ Upstream commit e60c122a1614b4f65b29a7bef9d83b9fd30e937a ]

The rcuscale.holdoff module parameter can be used to delay the start
of rcu_scale_writer() kthread.  However, the hung-task timeout will
trigger when the timeout specified by rcuscale.holdoff is greater than
hung_task_timeout_secs:

runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M"
bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300"

[  247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds.
[  247.072529]       Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7
[  247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  247.074331] task:rcu_scale_write state:D stack:30144 pid:59    ppid:2      flags:0x00004000
[  247.075346] Call Trace:
[  247.075660]  <TASK>
[  247.075965]  __schedule+0x635/0x1280
[  247.076448]  ? __pfx___schedule+0x10/0x10
[  247.076967]  ? schedule_timeout+0x2dc/0x4d0
[  247.077471]  ? __pfx_lock_release+0x10/0x10
[  247.078018]  ? enqueue_timer+0xe2/0x220
[  247.078522]  schedule+0x84/0x120
[  247.078957]  schedule_timeout+0x2e1/0x4d0
[  247.079447]  ? __pfx_schedule_timeout+0x10/0x10
[  247.080032]  ? __pfx_rcu_scale_writer+0x10/0x10
[  247.080591]  ? __pfx_process_timeout+0x10/0x10
[  247.081163]  ? __pfx_sched_set_fifo_low+0x10/0x10
[  247.081760]  ? __pfx_rcu_scale_writer+0x10/0x10
[  247.082287]  rcu_scale_writer+0x6b1/0x7f0
[  247.082773]  ? mark_held_locks+0x29/0xa0
[  247.083252]  ? __pfx_rcu_scale_writer+0x10/0x10
[  247.083865]  ? __pfx_rcu_scale_writer+0x10/0x10
[  247.084412]  kthread+0x179/0x1c0
[  247.084759]  ? __pfx_kthread+0x10/0x10
[  247.085098]  ret_from_fork+0x2c/0x50
[  247.085433]  </TASK>

This commit therefore replaces schedule_timeout_uninterruptible() with
schedule_timeout_idle().

Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/fork: beware of __put_task_struct() calling context

[ Upstream commit d243b34459cea30cfe5f3a9b2feb44e7daff9938 ]

Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping
locks. Therefore, it can't be called from an non-preemptible context.

One practical example is splat inside inactive_task_timer(), which is
called in a interrupt context:

  CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W ---------
   Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012
   Call Trace:
   dump_stack_lvl+0x57/0x7d
   mark_lock_irq.cold+0x33/0xba
   mark_lock+0x1e7/0x400
   mark_usage+0x11d/0x140
   __lock_acquire+0x30d/0x930
   lock_acquire.part.0+0x9c/0x210
   rt_spin_lock+0x27/0xe0
   refill_obj_stock+0x3d/0x3a0
   kmem_cache_free+0x357/0x560
   inactive_task_timer+0x1ad/0x340
   __run_hrtimer+0x8a/0x1a0
   __hrtimer_run_queues+0x91/0x130
   hrtimer_interrupt+0x10f/0x220
   __sysvec_apic_timer_interrupt+0x7b/0xd0
   sysvec_apic_timer_interrupt+0x4f/0xd0
   asm_sysvec_apic_timer_interrupt+0x12/0x20
   RIP: 0033:0x7fff196bf6f5

Instead of calling __put_task_struct() directly, we defer it using
call_rcu(). A more natural approach would use a workqueue, but since
in PREEMPT_RT, we can't allocate dynamic memory from atomic context,
the code would become more complex because we would need to put the
work_struct instance in the task_struct and initialize it when we
allocate a new task_struct.

The issue is reproducible with stress-ng:

  while true; do
      stress-ng --sched deadline --sched-period 1000000000 \
      --sched-runtime 800000000 --sched-deadline \
      1000000000 --mmapfork 23 -t 20
  done

Reported-by: Hu Chunyu <chuhu@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer

[ Upstream commit 3a21ffdbc825e0919db9da0e27ee5ff2cc8a863e ]

ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5

According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode.

When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed.

=============================================================
UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]'
CPU: 37 PID: 1678 Comm: cat Not tainted
6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k
HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace:
dump_backtrace+0xe0/0x130
show_stack+0x20/0x60
dump_stack_lvl+0x68/0x84
dump_stack+0x18/0x34
ubsan_epilogue+0x10/0x50
__ubsan_handle_out_of_bounds+0x80/0x90
acpi_ds_exec_end_op+0x1bc/0x6d8
acpi_ps_parse_loop+0x57c/0x618
acpi_ps_parse_aml+0x1e0/0x4b4
acpi_ps_execute_method+0x24c/0x2b8
acpi_ns_evaluate+0x3a8/0x4bc
acpi_evaluate_object+0x15c/0x37c
acpi_evaluate_integer+0x54/0x15c
show_power+0x8c/0x12c [acpi_power_meter]

Link: https://github.com/acpica/acpica/commit/90310989
Signed-off-by: Abhishek Mainkar <abmainkar@nvidia.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locks: fix KASAN: use-after-free in trace_event_raw_event_filelock_lock

[ Upstream commit 74f6f5912693ce454384eaeec48705646a21c74f ]

As following backtrace, the struct file_lock request , in posix_lock_inode
is free before ftrace function using.
Replace the ftrace function ahead free flow could fix the use-after-free
issue.

[name:report&]===============================================
BUG:KASAN: use-after-free in trace_event_raw_event_filelock_lock+0x80/0x12c
[name:report&]Read at addr f6ffff8025622620 by task NativeThread/16753
[name:report_hw_tags&]Pointer tag: [f6], memory tag: [fe]
[name:report&]
BT:
Hardware name: MT6897 (DT)
Call trace:
dump_backtrace+0xf8/0x148
show_stack+0x18/0x24
dump_stack_lvl+0x60/0x7c
print_report+0x2c8/0xa08
kasan_report+0xb0/0x120
__do_kernel_fault+0xc8/0x248
do_bad_area+0x30/0xdc
do_tag_check_fault+0x1c/0x30
do_mem_abort+0x58/0xbc
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x54/0x90
el1h_64_sync+0x68/0x6c
trace_event_raw_event_filelock_lock+0x80/0x12c
posix_lock_inode+0xd0c/0xd60
do_lock_file_wait+0xb8/0x190
fcntl_setlk+0x2d8/0x440
...
[name:report&]
[name:report&]Allocated by task 16752:
...
slab_post_alloc_hook+0x74/0x340
kmem_cache_alloc+0x1b0/0x2f0
posix_lock_inode+0xb0/0xd60
...
[name:report&]
[name:report&]Freed by task 16752:
...
  kmem_cache_free+0x274/0x5b0
  locks_dispose_list+0x3c/0x148
  posix_lock_inode+0xc40/0xd60
  do_lock_file_wait+0xb8/0x190
  fcntl_setlk+0x2d8/0x440
  do_fcntl+0x150/0xc18
...

Signed-off-by: Will Shiu <Will.Shiu@mediatek.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: output extra debug info if we failed to find an inline backref

[ Upstream commit 7f72f50547b7af4ddf985b07fc56600a4deba281 ]

[BUG]
Syzbot reported several warning triggered inside
lookup_inline_extent_backref().

[CAUSE]
As usual, the reproducer doesn't reliably trigger locally here, but at
least we know the WARN_ON() is triggered when an inline backref can not
be found, and it can only be triggered when @insert is true. (I.e.
inserting a new inline backref, which means the backref should already
exist)

[ENHANCEMENT]
After the WARN_ON(), dump all the parameters and the extent tree
leaf to help debug.

Link: https://syzkaller.appspot.com/bug?extid=d6f9ff86c1d804ba2bc6
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

autofs: fix memory leak of waitqueues in autofs_catatonic_mode

[ Upstream commit ccbe77f7e45dfb4420f7f531b650c00c6e9c7507 ]

Syzkaller reports a memory leak:

BUG: memory leak
unreferenced object 0xffff88810b279e00 (size 96):
  comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff  ..........'.....
    08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00  ..'.............
  backtrace:
    [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
    [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline]
    [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378
    [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593
    [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619
    [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897
    [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910
    [<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline]
    [<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline]
    [<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline]
    [<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
    [<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

autofs_wait_queue structs should be freed if their wait_ctr becomes zero.
Otherwise they will be lost.

In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new
waitqueue struct is allocated in autofs_wait(), its initial wait_ctr
equals 2. After that wait_event_killable() is interrupted (it returns
-ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not
satisfied. Actually, this condition can be satisfied when
autofs_wait_release() or autofs_catatonic_mode() is called and, what is
also important, wait_ctr is decremented in those places. Upon the exit of
autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process
begins: kill_sb calls autofs_catatonic_mode(), which should have freed the
waitqueues, but it only decrements its usage counter to zero which is not
a correct behaviour.

edit:imk
This description is of course not correct. The umount performed as a result
of an expire is a umount of a mount that has been automounted, it's not the
autofs mount itself. They happen independently, usually after everything
mounted within the autofs file system has been expired away. If everything
hasn't been expired away the automount daemon can still exit leaving mounts
in place. But expires done in both cases will result in a notification that
calls autofs_wait_release() with a result status. The problem case is the
summary execution of of the automount daemon. In this case any waiting
processes won't be woken up until either they are terminated or the mount
is umounted.
end edit: imk

So in catatonic mode we should free waitqueues which counter becomes zero.

edit: imk
Initially I was concerned that the calling of autofs_wait_release() and
autofs_catatonic_mode() was not mutually exclusive but that can't be the
case (obviously) because the queue entry (or entries) is removed from the
list when either of these two functions are called. Consequently the wait
entry will be freed by only one of these functions or by the woken process
in autofs_wait() depending on the order of the calls.
end edit: imk

Reported-by: syzbot+5e53f70e69ff0c0a1c0c@syzkaller.appspotmail.com
Suggested-by: Takeshi Misawa <jeliantsurux@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: autofs@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <169112719161.7590.6700123246297365841.stgit@donald.themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.1.54

Link: https://lore.kernel.org/r/20230917191040.964416434@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix a bug when searching for insert_above_mpcc

commit 3d028d5d60d516c536de1ddd3ebf3d55f3f8983b upstream.

[WHY]
Currently, when insert_plane is called with insert_above_mpcc
parameter that is equal to tree->opp_list, the function returns NULL.

[HOW]
Instead, the function should insert the plane at the top of the tree.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Only fiddle with CHECKFLAGS if `need-compiler'

commit 4fe4a6374c4db9ae2b849b61e84b58685dca565a upstream.

We have originally guarded fiddling with CHECKFLAGS in our arch Makefile
by checking for the CONFIG_MIPS variable, not set for targets such as
`distclean', etc. that neither include `.config' nor use the compiler.

Starting from commit 805b2e1d427a ("kbuild: include Makefile.compiler
only when compiler is needed") we have had a generic `need-compiler'
variable explicitly telling us if the compiler will be used and thus its
capabilities need to be checked and expressed in the form of compilation
flags. If this variable is not set, then `make' functions such as
`cc-option' are undefined, causing all kinds of weirdness to happen if
we expect specific results to be returned, most recently:

cc1: error: '-mloongson-mmi' must be used with '-mhard-float'

messages with configurations such as `fuloong2e_defconfig' and the
`modules_install' target, which does include `.config' and yet does not
use the compiler.

Replace the check for CONFIG_MIPS with one for `need-compiler' instead,
so as to prevent the compiler from being ever called for CHECKFLAGS when
not needed.

Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Closes: https://lore.kernel.org/r/85031c0c-d981-031e-8a50-bc4fad2ddcd8@collabora.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 805b2e1d427a ("kbuild: include Makefile.compiler only when compiler is needed")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().

[ Upstream commit a22730b1b4bf437c6bbfdeff5feddf54be4aeada ]

syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720
("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by
updating kcm_tx_msg(head)->last_skb if partial data is copied so that the
following sendmsg() will resume from the skb.

However, we cannot know how many bytes were copied when we get the error.
Thus, we could mess up the MSG_MORE queue.

When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we
do so for UDP by udp_flush_pending_frames().

Even without this change, when the error occurred, the following sendmsg()
resumed from a wrong skb and the queue was messed up. However, we have
yet to get such a report, and only syzkaller stumbled on it. So, this
can be changed safely.

Note this does not change SOCK_SEQPACKET behaviour.

Fixes: c821a88bd720 ("kcm: Fix memory leak in error path of kcm_sendmsg()")
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230912022753.33327-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: fix timestamp configuration code

[ Upstream commit 3c44191dd76cf9c0cc49adaf34384cbd42ef8ad2 ]

The commit in fixes introduced flags to control the status of hardware
configuration while processing packets. At the same time another structure
is used to provide configuration of timestamper to user-space applications.
The way it was coded makes this structures go out of sync easily. The
repro is easy for 82599 chips:

[root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1
current settings:
tx_type 0
rx_filter 0
new settings:
tx_type 1
rx_filter 12

The eth0 device is properly configured to timestamp any PTPv2 events.

[root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1
current settings:
tx_type 1
rx_filter 12
SIOCSHWTSTAMP failed: Numerical result out of range
The requested time stamping mode is not supported by the hardware.

The error is properly returned because HW doesn't support all packets
timestamping. But the adapter->flags is cleared of timestamp flags
even though no HW configuration was done. From that point no RX timestamps
are received by user-space application. But configuration shows good
values:

[root@hostname ~]# hwstamp_ctl -i eth0
current settings:
tx_type 1
rx_filter 12

Fix the issue by applying new flags only when the HW was actually
configured.

Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.

[ Upstream commit c48ef9c4aed3632566b57ba66cec6ec78624d4cb ]

Since bhash2 was introduced, the example below does not work as expected.
These two bind() should conflict, but the 2nd bind() now succeeds.

  from socket import *

  s1 = socket(AF_INET6, SOCK_STREAM)
  s1.bind(('::ffff:127.0.0.1', 0))

  s2 = socket(AF_INET, SOCK_STREAM)
  s2.bind(('127.0.0.1', s1.getsockname()[1]))

During the 2nd bind() in inet_csk_get_port(), inet_bind2_bucket_find()
fails to find the 1st socket's tb2, so inet_bind2_bucket_create() allocates
a new tb2 for the 2nd socket.  Then, we call inet_csk_bind_conflict() that
checks conflicts in the new tb2 by inet_bhash2_conflict().  However, the
new tb2 does not include the 1st socket, thus the bind() finally succeeds.

In this case, inet_bind2_bucket_match() must check if AF_INET6 tb2 has
the conflicting v4-mapped-v6 address so that inet_bind2_bucket_find()
returns the 1st socket's tb2.

Note that if we bind two sockets to 127.0.0.1 and then ::FFFF:127.0.0.1,
the 2nd bind() fails properly for the same reason mentinoed in the previous
commit.

Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix bind() regression for v4-mapped-v6 wildcard address.

[ Upstream commit aa99e5f87bd54db55dd37cb130bd5eb55933027f ]

Andrei Vagin reported bind() regression with strace logs.

If we bind() a TCPv6 socket to ::FFFF:0.0.0.0 and then bind() a TCPv4
socket to 127.0.0.1, the 2nd bind() should fail but now succeeds.

  from socket import *

  s1 = socket(AF_INET6, SOCK_STREAM)
  s1.bind(('::ffff:0.0.0.0', 0))

  s2 = socket(AF_INET, SOCK_STREAM)
  s2.bind(('127.0.0.1', s1.getsockname()[1]))

During the 2nd bind(), if tb->family is AF_INET6 and sk->sk_family is
AF_INET in inet_bind2_bucket_match_addr_any(), we still need to check
if tb has the v4-mapped-v6 wildcard address.

The example above does not work after commit 5456262d2baa ("net: Fix
incorrect address comparison when searching for a bind2 bucket"), but
the blamed change is not the commit.

Before the commit, the leading zeros of ::FFFF:0.0.0.0 were treated
as 0.0.0.0, and the sequence above worked by chance.  Technically, this
case has been broken since bhash2 was introduced.

Note that if we bind() two sockets to 127.0.0.1 and then ::FFFF:0.0.0.0,
the 2nd bind() fails properly because we fall back to using bhash to
detect conflicts for the v4-mapped-v6 address.

Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address")
Reported-by: Andrei Vagin <avagin@google.com>
Closes: https://lore.kernel.org/netdev/ZPuYBOFC8zsK6r9T@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).

[ Upstream commit c6d277064b1da7f9015b575a562734de87a7e463 ]

This is a prep patch to make the following patches cleaner that touch
inet_bind2_bucket_match() and inet_bind2_bucket_match_addr_any().

Both functions have duplicated comparison for netns, port, and l3mdev.
Let's factorise them.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa99e5f87bd5 ("tcp: Fix bind() regression for v4-mapped-v6 wildcard address.")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: Remove in6addr_any alternatives.

[ Upstream commit 8cdc3223e78c43e1b60ea1c536a103e32fdca3c5 ]

Some code defines the IPv6 wildcard address as a local variable and
use it with memcmp() or ipv6_addr_equal().

Let's use in6addr_any and ipv6_addr_any() instead.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: aa99e5f87bd5 ("tcp: Fix bind() regression for v4-mapped-v6 wildcard address.")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: fix ip6_sock_set_addr_preferences() typo

[ Upstream commit 8cdd9f1aaedf823006449faa4e540026c692ac43 ]

ip6_sock_set_addr_preferences() second argument should be an integer.

SUNRPC attempts to set IPV6_PREFER_SRC_PUBLIC were
translated to IPV6_PREFER_SRC_TMP

Fixes: 18d5ad623275 ("ipv6: add ip6_sock_set_addr_preferences")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230911154213.713941-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: fix sleep inside spinlock

[ Upstream commit 403f0e771457e2b8811dc280719d11b9bacf10f4 ]

macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate()
which can sleep. This results in:

| BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
| pps pps1: new PPS source ptp1
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| 4 locks held by kworker/u4:3/40:
|  #0: ffff000003409148
| macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered.
|  ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c
|  #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c
|  #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8
|  #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac
| irq event stamp: 113998
| hardirqs last  enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64
| hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8
| softirqs last  enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4
| softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c
| CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty #368
| Hardware name: ... ZynqMP ... (DT)
| Workqueue: events_power_efficient phylink_resolve
| Call trace:
|  dump_backtrace+0x98/0xf0
|  show_stack+0x18/0x24
|  dump_stack_lvl+0x60/0xac
|  dump_stack+0x18/0x24
|  __might_resched+0x144/0x24c
|  __might_sleep+0x48/0x98
|  __mutex_lock+0x58/0x7b0
|  mutex_lock_nested+0x24/0x30
|  clk_prepare_lock+0x4c/0xa8
|  clk_set_rate+0x24/0x8c
|  macb_mac_link_up+0x25c/0x2ac
|  phylink_resolve+0x178/0x4e8
|  process_one_work+0x1ec/0x51c
|  worker_thread+0x1ec/0x3e4
|  kthread+0x120/0x124
|  ret_from_fork+0x10/0x20

The obvious fix is to move the call to macb_set_tx_clk() out of the
protected area. This seems safe as rx and tx are both disabled anyway at
this point.
It is however not entirely clear what the spinlock shall protect. It
could be the read-modify-write access to the NCFGR register, but this
is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well
without holding the spinlock. It could also be the register accesses
done in mog_init_rings() or macb_init_buffers(), but again these
functions are called without holding the spinlock in macb_hresp_error_task().
The locking seems fishy in this driver and it might deserve another look
before this patch is applied.

Fixes: 633e98a711ac0 ("net: macb: use resolved link config in mac_link_up()")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230908112913.1701766-1-s.hauer@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: Enable PTP unicast

[ Upstream commit ee4e92c26c60b7344b7261035683a37da5a6119b ]

Enable transmission and reception of PTP unicast packets by
updating PTP unicast config bit and setting current HW mac
address as allowed address in PTP unicast filter registers.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 403f0e771457 ("net: macb: fix sleep inside spinlock")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()

[ Upstream commit cfaa80c91f6f99b9342b6557f0f0e1143e434066 ]

I got the below warning when do fuzzing test:
BUG: KASAN: null-ptr-deref in scatterwalk_copychunks+0x320/0x470
Read of size 4 at addr 0000000000000008 by task kworker/u8:1/9

CPU: 0 PID: 9 Comm: kworker/u8:1 Tainted: G OE
Hardware name: linux,dummy-virt (DT)
Workqueue: pencrypt_parallel padata_parallel_worker
Call trace:
dump_backtrace+0x0/0x420
show_stack+0x34/0x44
dump_stack+0x1d0/0x248
__kasan_report+0x138/0x140
kasan_report+0x44/0x6c
__asan_load4+0x94/0xd0
scatterwalk_copychunks+0x320/0x470
skcipher_next_slow+0x14c/0x290
skcipher_walk_next+0x2fc/0x480
skcipher_walk_first+0x9c/0x110
skcipher_walk_aead_common+0x380/0x440
skcipher_walk_aead_encrypt+0x54/0x70
ccm_encrypt+0x13c/0x4d0
crypto_aead_encrypt+0x7c/0xfc
pcrypt_aead_enc+0x28/0x84
padata_parallel_worker+0xd0/0x2dc
process_one_work+0x49c/0xbdc
worker_thread+0x124/0x880
kthread+0x210/0x260
ret_from_fork+0x10/0x18

This is because the value of rec_seq of tls_crypto_info configured by the
user program is too large, for example, 0xffffffffffffff. In addition, TLS
is asynchronously accelerated. When tls_do_encryption() returns
-EINPROGRESS and sk->sk_err is set to EBADMSG due to rec_seq overflow,
skmsg is released before the asynchronous encryption process ends. As a
result, the UAF problem occurs during the asynchronous processing of the
encryption module.

If the operation is asynchronous and the encryption module returns
EINPROGRESS, do not free the record information.

Fixes: 635d93981786 ("net/tls: free record only on encryption error")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20230909081434.2324940-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: NVSW_SN2201 should depend on ACPI

[ Upstream commit 0a138f1670bd1af13ba6949c48ea86ddd4bf557e ]

The only probing method supported by the Nvidia SN2201 platform driver
is probing through an ACPI match table. Hence add a dependency on
ACPI, to prevent asking the user about this driver when configuring a
kernel without ACPI support.

Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/ec5a4071691ab08d58771b7732a9988e89779268.1693828363.git.geert+renesas@glider.be
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: mlxbf-pmc: Fix reading of unprogrammed events

[ Upstream commit 0f5969452e162efc50bdc98968fb62b424a9874b ]

This fix involves 2 changes:
- All event regs have a reset value of 0, which is not a valid
   event_number as per the event_list for most blocks and hence seen
   as an error. Add a "disable" event with event_number 0 for all blocks.

- The enable bit for each counter need not be checked before
   reading the event info, and hence removed.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/04d0213932d32681de1c716b54320ed894e52425.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: mlxbf-pmc: Fix potential buffer overflows

[ Upstream commit 80ccd40568bcd3655b0fd0be1e9b3379fd6e1056 ]

Replace sprintf with sysfs_emit where possible.
Size check in mlxbf_pmc_event_list_show should account for "\0".

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/bef39ef32319a31b32f999065911f61b0d3b17c3.1693917738.git.shravankr@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: mlxbf-tmfifo: Drop jumbo frames

[ Upstream commit fc4c655821546239abb3cf4274d66b9747aa87dd ]

This commit drops over-sized network packets to avoid tmfifo
queue stuck.

Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/9318936c2447f76db475c985ca6d91f057efcd41.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors

[ Upstream commit 78034cbece79c2d730ad0770b3b7f23eedbbecf5 ]

This commit fixes tmfifo console stuck issue when the virtual
networking interface is in down state. In such case, the network
Rx descriptors runs out and causes the Rx network packet staying
in the head of the tmfifo thus blocking the console packets. The
fix is to drop the Rx network packet when no more Rx descriptors.
Function name mlxbf_tmfifo_release_pending_pkt() is also renamed
to mlxbf_tmfifo_release_pkt() to be more approperiate.

Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/8c0177dc938ae03f52ff7e0b62dbeee74b7bec09.1693322547.git.limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kcm: Fix memory leak in error path of kcm_sendmsg()

[ Upstream commit c821a88bd720b0046433173185fd841a100d44ad ]

syzbot reported a memory leak like below:

BUG: memory leak
unreferenced object 0xffff88810b088c00 (size 240):
  comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s)
  hex dump (first 32 bytes):
    00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634
    [<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline]
    [<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815
    [<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline]
    [<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748
    [<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494
    [<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548
    [<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577
    [<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    [<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
    [<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append
newly allocated skbs to 'head'. If some bytes are copied, an error occurred,
and jumped to out_error label, 'last_skb' is left unmodified. A later
kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the
'head' frag_list and causing the leak.

This patch fixes this issue by properly updating the last allocated skb in
'last_skb'.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-and-tested-by: syzbot+6f98de741f7dbbfc4ccb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6f98de741f7dbbfc4ccb
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8152: check budget for r8152_poll()

[ Upstream commit a7b8d60b37237680009dd0b025fe8c067aba0ee3 ]

According to the document of napi, there is no rx process when the
budget is 0. Therefore, r8152_poll() has to return 0 directly when the
budget is equal to 0.

Fixes: d2187f8e4454 ("r8152: divide the tx and rx bottom functions")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset

[ Upstream commit 86899e9e1e29e854b5f6dcc24ba4f75f792c89aa ]

Currently, when we add the first sja1105 port to a bridge with
vlan_filtering 1, then we sometimes see this output:

sja1105 spi2.2: port 4 failed to read back entry for be:79:b4:9e:9e:96 vid 3088: -ENOENT
sja1105 spi2.2: Reset switch and programmed static config. Reason: VLAN filtering
sja1105 spi2.2: port 0 failed to add be:79:b4:9e:9e:96 vid 0 to fdb: -2

It is because sja1105_fdb_add() runs from the dsa_owq which is no longer
serialized with switch resets since it dropped the rtnl_lock() in the
blamed commit.

Either performing the FDB accesses before the reset, or after the reset,
is equally fine, because sja1105_static_fdb_change() backs up those
changes in the static config, but FDB access during reset isn't ok.

Make sja1105_static_config_reload() take the fdb_lock to fix that.

Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: sja1105: serialize sja1105_port_mcast_flood() with other FDB accesses

[ Upstream commit ea32690daf4fa525dc5a4d164bd00ed8c756e1c6 ]

sja1105_fdb_add() runs from the dsa_owq, and sja1105_port_mcast_flood()
runs from switchdev_deferred_process_work(). Prior to the blamed commit,
they used to be indirectly serialized through the rtnl_lock(), which
no longer holds true because dsa_owq dropped that.

So, it is now possible that we traverse the static config BLK_IDX_L2_LOOKUP
elements concurrently compared to when we change them, in
sja1105_static_fdb_change(). That is not ideal, since it might result in
data corruption.

Introduce a mutex which serializes accesses to the hardware FDB and to
the static config elements for the L2 Address Lookup table.

I can't find a good reason to add locking around sja1105_fdb_dump().
I'll add it later if needed.

Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: sja1105: fix multicast forwarding working only for last added mdb entry

[ Upstream commit 7cef293b9a634a05fcce9e1df4aee3aeed023345 ]

The commit cited in Fixes: did 2 things: it refactored the read-back
polling from sja1105_dynamic_config_read() into a new function,
sja1105_dynamic_config_wait_complete(), and it called that from
sja1105_dynamic_config_write() too.

What is problematic is the refactoring.

The refactored code from sja1105_dynamic_config_poll_valid() works like
the previous one, but the problem is that it uses another packed_buf[]
SPI buffer, and there was code at the end of sja1105_dynamic_config_read()
which was relying on the read-back packed_buf[]:

/* Don't dereference possibly NULL pointer - maybe caller
* only wanted to see whether the entry existed or not.
*/
if (entry)
ops->entry_packing(packed_buf, entry, UNPACK);

After the change, the packed_buf[] that this code sees is no longer the
entry read back from hardware, but the original entry that the caller
passed to the sja1105_dynamic_config_read(), packed into this buffer.

This difference is the most notable with the SJA1105_SEARCH uses from
sja1105pqrs_fdb_add() - used for both fdb and mdb. There, we have logic
added by commit 728db843df88 ("net: dsa: sja1105: ignore the FDB entry
for unknown multicast when adding a new address") to figure out whether
the address we're trying to add matches on any existing hardware entry,
with the exception of the catch-all multicast address.

That logic was broken, because with sja1105_dynamic_config_read() not
working properly, it doesn't return us the entry read back from
hardware, but the entry that we passed to it. And, since for multicast,
a match will always exist, it will tell us that any mdb entry already
exists at index=0 L2 Address Lookup table. It is index=0 because the
caller doesn't know the index - it wants to find it out, and
sja1105_dynamic_config_read() does:

if (index < 0) { // SJA1105_SEARCH
/* Avoid copying a signed negative number to an u64 */
cmd.index = 0; // <- this
cmd.search = true;
} else {
cmd.index = index;
cmd.search = false;
}

So, to the caller of sja1105_dynamic_config_read(), the returned info
looks entirely legit, and it will add all mdb entries to FDB index 0.
There, they will always overwrite each other (not to mention,
potentially they can also overwrite a pre-existing bridge fdb entry),
and the user-visible impact will be that only the last mdb entry will be
forwarded as it should. The others won't (will be flooded or dropped,
depending on the egress flood settings).

Fixing is a bit more complicated, and involves either passing the same
packed_buf[] to sja1105_dynamic_config_wait_complete(), or moving all
the extra processing on the packed_buf[] to
sja1105_dynamic_config_wait_complete(). I've opted for the latter,
because it makes sja1105_dynamic_config_wait_complete() a bit more
self-contained.

Fixes: df405910ab9f ("net: dsa: sja1105: wait for dynamic config command completion on writes too")
Reported-by: Yanan Yang <yanan.yang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: sja1105: propagate exact error code from sja1105_dynamic_config_poll_valid()

[ Upstream commit c956798062b5a308db96e75157747291197f0378 ]

Currently, sja1105_dynamic_config_wait_complete() returns either 0 or
-ETIMEDOUT, because it just looks at the read_poll_timeout() return code.

There will be future changes which move some more checks to
sja1105_dynamic_config_poll_valid(). It is important that we propagate
their exact return code (-ENOENT, -EINVAL), because callers of
sja1105_dynamic_config_read() depend on them.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 7cef293b9a63 ("net: dsa: sja1105: fix multicast forwarding working only for last added mdb entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: sja1105: hide all multicast addresses from "bridge fdb show"

[ Upstream commit 02c652f5465011126152bbd93b6a582a1d0c32f1 ]

Commit 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to
device") has partially hidden some multicast entries from showing up in
the "bridge fdb show" output, but it wasn't enough. Addresses which are
added through "bridge mdb add" still show up. Hide them all.

Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net:ethernet:adi:adin1110: Fix forwarding offload

[ Upstream commit 32530dba1bd48da4437d18d9a8dbc9d2826938a6 ]

Currently, when a new fdb entry is added (with both ports of the
ADIN2111 bridged), the driver configures the MAC filters for the wrong
port, which results in the forwarding being done by the host, and not
actually hardware offloaded.

The ADIN2111 offloads the forwarding by setting filters on the
destination MAC address of incoming frames. Based on these, they may be
routed to the other port. Thus, if a frame has to be forwarded from port
1 to port 2, the required configuration for the ADDR_FILT_UPRn register
should set the APPLY2PORT1 bit (instead of APPLY2PORT2, as it's
currently the case).

Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: adi: adin1110: use eth_broadcast_addr() to assign broadcast address

[ Upstream commit 54024dbec95585243391caeb9f04a2620e630765 ]

Use eth_broadcast_addr() to assign broadcast address instead
of memset().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 32530dba1bd4 ("net:ethernet:adi:adin1110: Fix forwarding offload")
Signed-off-by: Sasha Levin <sashal@kernel.org>

hsr: Fix uninit-value access in fill_frame_info()

[ Upstream commit 484b4833c604c0adcf19eac1ca14b60b757355b5 ]

Syzbot reports the following uninit-value access problem.

=====================================================
BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:601 [inline]
BUG: KMSAN: uninit-value in hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616
fill_frame_info net/hsr/hsr_forward.c:601 [inline]
hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616
hsr_dev_xmit+0x192/0x330 net/hsr/hsr_device.c:223
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3560
__dev_queue_xmit+0x34d0/0x52a0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
__sys_sendto+0x781/0xa30 net/socket.c:2176
__do_sys_sendto net/socket.c:2188 [inline]
__se_sys_sendto net/socket.c:2184 [inline]
__ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82

Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x148/0x470 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:644
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6299
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2794
packet_alloc_skb net/packet/af_packet.c:2936 [inline]
packet_snd net/packet/af_packet.c:3030 [inline]
packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
__sys_sendto+0x781/0xa30 net/socket.c:2176
__do_sys_sendto net/socket.c:2188 [inline]
__se_sys_sendto net/socket.c:2184 [inline]
__ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82

It is because VLAN not yet supported in hsr driver. Return error
when protocol is ETH_P_8021Q in fill_frame_info() now to fix it.

Fixes: 451d8123f897 ("net: prp: add packet handling support")
Reported-by: syzbot+bf7e6250c7ce248f3ec9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bf7e6250c7ce248f3ec9
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all()

[ Upstream commit e4c79810755f66c9a933ca810da2724133b1165a ]

rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference.

Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mvpp2_main: fix possible OOB write in mvpp2_ethtool_get_rxnfc()

[ Upstream commit 51fe0a470543f345e3c62b6798929de3ddcedc1d ]

rules is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rules to avoid OOB writing or NULL pointer dereference.

Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: fix handling of zero coalescing tx-usecs

[ Upstream commit fa60b8163816f194786f3ee334c9a458da7699c6 ]

Setting ethtool -C eth0 tx-usecs 0 is supposed to disable the use of the
coalescing timer but currently it gets programmed with zero delay
instead.

Disable the use of the coalescing timer if tx-usecs is zero by
preventing it from being restarted. Note that to keep things simple we
don't start/stop the timer when the coalescing settings are changed, but
just let that happen on the next transmit or timer expiry.

Fixes: 8fce33317023 ("net: stmmac: Rework coalesce timer and fix multi-queue races")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add

[ Upstream commit f5146e3ef0a9eea405874b36178c19a4863b8989 ]

While doing smcr_port_add, there maybe linkgroup add into or delete
from smc_lgr_list.list at the same time, which may result kernel crash.
So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in
smcr_port_add.

The crash calltrace show below:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014
Workqueue: events smc_ib_port_event_work [smc]
RIP: 0010:smcr_port_add+0xa6/0xf0 [smc]
RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297
RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918
R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4
R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08
FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0
PKRU: 55555554
Call Trace:
smc_ib_port_event_work+0x18f/0x380 [smc]
process_one_work+0x19b/0x340
worker_thread+0x30/0x370
? process_one_work+0x340/0x340
kthread+0x114/0x130
? __kthread_cancel_work+0x50/0x50
ret_from_fork+0x1f/0x30

Fixes: 1f90a05d9ff9 ("net/smc: add smcr_port_add() and smcr_link_up() processing")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: Keep symlinks, when possible

[ Upstream commit 3f3f384139ed147c71e1d770accf610133d5309b ]

When kselftest is built/installed with the 'gen_tar' target, rsync is
used for the installation step to copy files. Extra care is needed for
tests that have symlinks. Commit ae108c48b5d2 ("selftests: net: Fix
cross-tree inclusion of scripts") added '-L' (transform symlink into
referent file/dir) to rsync, to fix dangling links. However, that
broke some tests where the symlink (being a symlink) is part of the
test (e.g. exec:execveat).

Use rsync's '--copy-unsafe-links' that does right thing.

Fixes: ae108c48b5d2 ("selftests: net: Fix cross-tree inclusion of scripts")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kselftest/runner.sh: Propagate SIGTERM to runner child

[ Upstream commit 9616cb34b08ec86642b162eae75c5a7ca8debe3c ]

Timeouts in kselftest are done using the "timeout" command with the
"--foreground" option. Without the "foreground" option, it is not
possible for a user to cancel the runner using SIGINT, because the
signal is not propagated to timeout which is running in a different
process group. The "forground" options places the timeout in the same
process group as its parent, but only sends the SIGTERM (on timeout)
signal to the forked process. Unfortunately, this does not play nice
with all kselftests, e.g. "net:fcnal-test.sh", where the child
processes will linger because timeout does not send SIGTERM to the
group.

Some users have noted these hangs [1].

Fix this by nesting the timeout with an additional timeout without the
foreground option.

Link: https://lore.kernel.org/all/7650b2eb-0aee-a2b0-2e64-c9bc63210f67@alu.unizg.hr/
Fixes: 651e0d881461 ("kselftest/runner: allow to properly deliver signals to tests")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipv4: fix one memleak in __inet_del_ifa()

[ Upstream commit ac28b1ec6135649b5d78b028e47264cb3ebca5ea ]

I got the below warning when do fuzzing test:
unregister_netdevice: waiting for bond0 to become free. Usage count = 2

It can be repoduced via:

ip link add bond0 type bond
sysctl -w net.ipv4.conf.bond0.promote_secondaries=1
ip addr add 4.117.174.103/0 scope 0x40 dev bond0
ip addr add 192.168.100.111/255.255.255.254 scope 0 dev bond0
ip addr add 0.0.0.4/0 scope 0x40 secondary dev bond0
ip addr del 4.117.174.103/0 scope 0x40 dev bond0
ip link delete bond0 type bond

In this reproduction test case, an incorrect 'last_prim' is found in
__inet_del_ifa(), as a result, the secondary address(0.0.0.4/0 scope 0x40)
is lost. The memory of the secondary address is leaked and the reference of
in_device and net_device is leaked.

Fix this problem:
Look for 'last_prim' starting at location of the deleted IP and inserting
the promoted IP into the location of 'last_prim'.

Fixes: 0ff60a45678e ("[IPV4]: Fix secondary IP addresses after promotion")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Fix wild-memory-access bug in kunit_free_suite_set()

[ Upstream commit 2810c1e99867a811e631dd24e63e6c1e3b78a59d ]

Inject fault while probing kunit-example-test.ko, if kstrdup()
fails in mod_sysfs_setup() in load_module(), the mod->state will
switch from MODULE_STATE_COMING to MODULE_STATE_GOING instead of
from MODULE_STATE_LIVE to MODULE_STATE_GOING, so only
kunit_module_exit() will be called without kunit_module_init(), and
the mod->kunit_suites is no set correctly and the free in
kunit_free_suite_set() will cause below wild-memory-access bug.

The mod->state state machine when load_module() succeeds:

MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_LIVE
^ |
| | delete_module
+---------------- MODULE_STATE_GOING <---------+

The mod->state state machine when load_module() fails at
mod_sysfs_setup():

MODULE_STATE_UNFORMED ---> MODULE_STATE_COMING ---> MODULE_STATE_GOING
^ |
| |
+-----------------------------------------------+

Call kunit_module_init() at MODULE_STATE_COMING state to fix the issue
because MODULE_STATE_LIVE is transformed from it.

Unable to handle kernel paging request at virtual address ffffff341e942a88
KASAN: maybe wild-memory-access in range [0x0003f9a0f4a15440-0x0003f9a0f4a15447]
Mem abort info:
   ESR = 0x0000000096000004
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x04: level 0 translation fault
Data abort info:
   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000441ea000
[ffffff341e942a88] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in: kunit_example_test(-) cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: kunit_example_test]
CPU: 3 PID: 2035 Comm: modprobe Tainted: G        W        N 6.5.0-next-20230828+ #136
Hardware name: linux,dummy-virt (DT)
pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kfree+0x2c/0x70
lr : kunit_free_suite_set+0xcc/0x13c
sp : ffff8000829b75b0
x29: ffff8000829b75b0 x28: ffff8000829b7b90 x27: 0000000000000000
x26: dfff800000000000 x25: ffffcd07c82a7280 x24: ffffcd07a50ab300
x23: ffffcd07a50ab2e8 x22: 1ffff00010536ec0 x21: dfff800000000000
x20: ffffcd07a50ab2f0 x19: ffffcd07a50ab2f0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: ffffcd07c24b6764
x14: ffffcd07c24b63c0 x13: ffffcd07c4cebb94 x12: ffff700010536ec7
x11: 1ffff00010536ec6 x10: ffff700010536ec6 x9 : dfff800000000000
x8 : 00008fffefac913a x7 : 0000000041b58ab3 x6 : 0000000000000000
x5 : 1ffff00010536ec5 x4 : ffff8000829b7628 x3 : dfff800000000000
x2 : ffffff341e942a80 x1 : ffffcd07a50aa000 x0 : fffffc0000000000
Call trace:
  kfree+0x2c/0x70
  kunit_free_suite_set+0xcc/0x13c
  kunit_module_notify+0xd8/0x360
  blocking_notifier_call_chain+0xc4/0x128
  load_module+0x382c/0x44a4
  init_module_from_file+0xd4/0x128
  idempotent_init_module+0x2c8/0x524
  __arm64_sys_finit_module+0xac/0x100
  invoke_syscall+0x6c/0x258
  el0_svc_common.constprop.0+0x160/0x22c
  do_el0_svc+0x44/0x5c
  el0_svc+0x38/0x78
  el0t_64_sync_handler+0x13c/0x158
  el0t_64_sync+0x190/0x194
Code: aa0003e1 b25657e0 d34cfc42 8b021802 (f9400440)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: 0x4d0742200000 from 0xffff800080000000
PHYS_OFFSET: 0xffffee43c0000000
CPU features: 0x88000203,3c020000,1000421b
Memory Limit: none
Rebooting in 1 seconds..

Fixes: 3d6e44623841 ("kunit: unify module and builtin suite definitions")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: register a dirty framebuffer callback for fbcon

commit 0a611560f53bfd489e33f4a718c915f1a6123d03 upstream.

fbcon requires that we implement &drm_framebuffer_funcs.dirty.
Otherwise, the framebuffer might take a while to flush (which would
manifest as noticeable lag). However, we can't enable this callback for
non-fbcon cases since it may cause too many atomic commits to be made at
once. So, implement amdgpu_dirtyfb() and only enable it for fbcon
framebuffers (we can use the "struct drm_file file" parameter in the
callback to check for this since it is only NULL when called by fbcon,
at least in the mainline kernel) on devices that support atomic KMS.

Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Remove wait while locked

commit 5a3ccb1400339268c5e3dc1fa044a7f6c7f59a02 upstream.

[Why]
We wait for mpc idle while in a locked state, leading to potential
deadlock.

[What]
Move the wait_for_idle call to outside of HW lock. This and a
call to wait_drr_doublebuffer_pending_clear are moved added to a new
static helper function called wait_for_outstanding_hw_updates, to make
the interface clearer.

Cc: stable@vger.kernel.org
Fixes: 8f0d304d21b3 ("drm/amd/display: Do not commit pipe when updating DRR")
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: always switch off ODM before committing more streams

commit 49a30c3d1a2258fc93cfe6eea8e4951dabadc824 upstream.

ODM power optimization is only supported with single stream. When ODM
power optimization is enabled, we might not have enough free pipes for
enabling other stream. So when we are committing more than 1 stream we
should first switch off ODM power optimization to make room for new
stream and then allocating pipe resource for the new stream.

Cc: stable@vger.kernel.org
Fixes: 59de751e3845 ("drm/amd/display: add ODM case when looking for first split pipe")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf hists browser: Fix the number of entries for 'e' key

commit f6b8436bede3e80226e8b2100279c4450c73806a upstream.

The 'e' key is to toggle expand/collapse the selected entry only.  But
the current code has a bug that it only increases the number of entries
by 1 in the hierarchy mode so users cannot move under the current entry
after the key stroke.  This is due to a wrong assumption in the
hist_entry__set_folding().

The commit b33f922651011eff ("perf hists browser: Put hist_entry folding
logic into single function") factored out the code, but actually it
should be handled separately.  The hist_browser__set_folding() is to
update fold state for each entry so it needs to traverse all (child)
entries regardless of the current fold state.  So it increases the
number of entries by 1.

But the hist_entry__set_folding() only cares the currently selected
entry and its all children.  So it should count all unfolded child
entries.  This code is implemented in hist_browser__toggle_fold()
already so we can just call it.

Fixes: b33f922651011eff ("perf hists browser: Put hist_entry folding logic into single function")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230731094934.1616495-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Handle old data in PERF_RECORD_ATTR

commit 9bf63282ea77a531ea58acb42fb3f40d2d1e4497 upstream.

The PERF_RECORD_ATTR is used for a pipe mode to describe an event with
attribute and IDs.  The ID table comes after the attr and it calculate
size of the table using the total record size and the attr size.

  n_ids = (total_record_size - end_of_the_attr_field) / sizeof(u64)

This is fine for most use cases, but sometimes it saves the pipe output
in a file and then process it later.  And it becomes a problem if there
is a change in attr size between the record and report.

  $ perf record -o- > perf-pipe.data  # old version
  $ perf report -i- < perf-pipe.data  # new version

For example, if the attr size is 128 and it has 4 IDs, then it would
save them in 168 byte like below:

   8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
128 byte: perf event attr { .size = 128, ... },
  32 byte: event IDs [] = { 1234, 1235, 1236, 1237 },

But when report later, it thinks the attr size is 136 then it only read
the last 3 entries as ID.

   8 byte: perf event header { .type = PERF_RECORD_ATTR, .size = 168 },
136 byte: perf event attr { .size = 136, ... },
  24 byte: event IDs [] = { 1235, 1236, 1237 },  // 1234 is missing

So it should use the recorded version of the attr.  The attr has the
size field already then it should honor the size when reading data.

Fixes: 2c46dbb517a10b18 ("perf: Convert perf header attrs into attr events")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825152552.112913-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf test shell stat_bpf_counters: Fix test on Intel

commit 68ca249c964f520af7f8763e22f12bd26b57b870 upstream.

As of now, bpf counters (bperf) don't support event groups.  But the
default perf stat includes topdown metrics if supported (on recent Intel
machines) which require groups.  That makes perf stat exiting.

  $ sudo perf stat --bpf-counter true
  bpf managed perf events do not yet support groups.

Actually the test explicitly uses cycles event only, but it missed to
pass the option when it checks the availability of the command.

Fixes: 2c0cb9f56020d2ea ("perf test: Add a shell test for 'perf stat --bpf-counters' new option")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf hists browser: Fix hierarchy mode header

commit e2cabf2a44791f01c21f8d5189b946926e34142e upstream.

The commit ef9ff6017e3c4593 ("perf ui browser: Move the extra title
lines from the hists browser") introduced ui_browser__gotorc_title() to
help moving non-title lines easily. But it missed to update the title
for the hierarchy mode so it won't print the header line on TUI at all.

$ perf report --hierarchy

Fixes: ef9ff6017e3c4593 ("perf ui browser: Move the extra title lines from the hists browser")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230731094934.1616495-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: Fix CONFIG_CPU_DADDI_WORKAROUNDS `modules_install' regression

commit a79a404e6c2241ebc528b9ebf4c0832457b498c3 upstream.

Remove a build-time check for the presence of the GCC `-msym32' option.
This option has been there since GCC 4.1.0, which is below the minimum
required as at commit 805b2e1d427a ("kbuild: include Makefile.compiler
only when compiler is needed"), when an error message:

arch/mips/Makefile:306: *** CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32. Stop.

started to trigger for the `modules_install' target with configurations
such as `decstation_64_defconfig' that set CONFIG_CPU_DADDI_WORKAROUNDS,
because said commit has made `cc-option-yn' an undefined function for
non-build targets.

Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 805b2e1d427a ("kbuild: include Makefile.compiler only when compiler is needed")
Cc: stable@vger.kernel.org # v5.13+
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Skip VMSA init in sev_es_init_vmcb() if pointer is NULL

commit 1952e74da96fb3e48b72a2d0ece78c688a5848c1 upstream.

Skip initializing the VMSA physical address in the VMCB if the VMSA is
NULL, which occurs during intrahost migration as KVM initializes the VMCB
before copying over state from the source to the destination (including
the VMSA and its physical address).

In normal builds, __pa() is just math, so the bug isn't fatal, but with
CONFIG_DEBUG_VIRTUAL=y, the validity of the virtual address is verified
and passing in NULL will make the kernel unhappy.

Fixes: 6defa24d3b12 ("KVM: SEV: Init target VMCBs in sev_migrate_from")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20230825022357.2852133-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Set target pCPU during IRTE update if target vCPU is running

commit f3cebc75e7425d6949d726bb8e937095b0aef025 upstream.

Update the target pCPU for IOMMU doorbells when updating IRTE routing if
KVM is actively running the associated vCPU. KVM currently only updates
the pCPU when loading the vCPU (via avic_vcpu_load()), and so doorbell
events will be delayed until the vCPU goes through a put+load cycle (which
might very well "never" happen for the lifetime of the VM).

To avoid inserting a stale pCPU, e.g. due to racing between updating IRTE
routing and vCPU load/put, get the pCPU information from the vCPU's
Physical APIC ID table entry (a.k.a. avic_physical_id_cache in KVM) and
update the IRTE while holding ir_list_lock. Add comments with --verbose
enabled to explain exactly what is and isn't protected by ir_list_lock.

Fixes: 411b44ba80ab ("svm: Implements update_pi_irte hook to setup posted interrupt")
Reported-by: dengqiao.joey <dengqiao.joey@bytedance.com>
Cc: stable@vger.kernel.org
Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230808233132.2499764-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nSVM: Load L1's TSC multiplier based on L1 state, not L2 state

commit 0c94e2468491cbf0754f49a5136ab51294a96b69 upstream.

When emulating nested VM-Exit, load L1's TSC multiplier if L1's desired
ratio doesn't match the current ratio, not if the ratio L1 is using for
L2 diverges from the default.  Functionally, the end result is the same
as KVM will run L2 with L1's multiplier if L2's multiplier is the default,
i.e. checking that L1's multiplier is loaded is equivalent to checking if
L2 has a non-default multiplier.

However, the assertion that TSC scaling is exposed to L1 is flawed, as
userspace can trigger the WARN at will by writing the MSR and then
updating guest CPUID to hide the feature (modifying guest CPUID is
allowed anytime before KVM_RUN).  E.g. hacking KVM's state_test
selftest to do

                vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
                vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);

after restoring state in a new VM+vCPU yields an endless supply of:

  ------------[ cut here ]------------
  WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105
           nested_svm_vmexit+0x6af/0x720 [kvm_amd]
  Call Trace:
   nested_svm_exit_handled+0x102/0x1f0 [kvm_amd]
   svm_handle_exit+0xb9/0x180 [kvm_amd]
   kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
   kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
   ? trace_hardirqs_off+0x4d/0xa0
   __se_sys_ioctl+0x7a/0xc0
   __x64_sys_ioctl+0x21/0x30
   do_syscall_64+0x41/0x90
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

Unlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled check
into the if-statement is wrong as KVM needs to ensure L1's multiplier is
loaded in the above scenario.   Alternatively, the WARN_ON() could simply
be deleted, but that would make KVM's behavior even more subtle, e.g. it's
not immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO when
checking only tsc_ratio_msr.

Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nSVM: Check instead of asserting on nested TSC scaling support

commit 7cafe9b8e22bb3d77f130c461aedf6868c4aaf58 upstream.

Check for nested TSC scaling support on nested SVM VMRUN instead of
asserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIO
has diverged from KVM's default.  Userspace can trigger the WARN at will
by writing the MSR and then updating guest CPUID to hide the feature
(modifying guest CPUID is allowed anytime before KVM_RUN).  E.g. hacking
KVM's state_test selftest to do

vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);

after restoring state in a new VM+vCPU yields an endless supply of:

  ------------[ cut here ]------------
  WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699
           nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd]
  Call Trace:
   <TASK>
   enter_svm_guest_mode+0x114/0x560 [kvm_amd]
   nested_svm_vmrun+0x260/0x330 [kvm_amd]
   vmrun_interception+0x29/0x30 [kvm_amd]
   svm_invoke_exit_handler+0x35/0x100 [kvm_amd]
   svm_handle_exit+0xe7/0x180 [kvm_amd]
   kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
   kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
   __se_sys_ioctl+0x7a/0xc0
   __x64_sys_ioctl+0x21/0x30
   do_syscall_64+0x41/0x90
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
  RIP: 0033:0x45ca1b

Note, the nested #VMEXIT path has the same flaw, but needs a different
fix and will be handled separately.

Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Get source vCPUs from source VM for SEV-ES intrahost migration

commit f1187ef24eb8f36e8ad8106d22615ceddeea6097 upstream.

Fix a goof where KVM tries to grab source vCPUs from the destination VM
when doing intrahost migration.  Grabbing the wrong vCPU not only hoses
the guest, it also crashes the host due to the VMSA pointer being left
NULL.

  BUG: unable to handle page fault for address: ffffe38687000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 39 PID: 17143 Comm: sev_migrate_tes Tainted: GO       6.5.0-smp--fff2e47e6c3b-next #151
  Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.28.0 07/10/2023
  RIP: 0010:__free_pages+0x15/0xd0
  RSP: 0018:ffff923fcf6e3c78 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffffe38687000000 RCX: 0000000000000100
  RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffe38687000000
  RBP: ffff923fcf6e3c88 R08: ffff923fcafb0000 R09: 0000000000000000
  R10: 0000000000000000 R11: ffffffff83619b90 R12: ffff923fa9540000
  R13: 0000000000080007 R14: ffff923f6d35d000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff929d0d7c0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffe38687000000 CR3: 0000005224c34005 CR4: 0000000000770ee0
  PKRU: 55555554
  Call Trace:
   <TASK>
   sev_free_vcpu+0xcb/0x110 [kvm_amd]
   svm_vcpu_free+0x75/0xf0 [kvm_amd]
   kvm_arch_vcpu_destroy+0x36/0x140 [kvm]
   kvm_destroy_vcpus+0x67/0x100 [kvm]
   kvm_arch_destroy_vm+0x161/0x1d0 [kvm]
   kvm_put_kvm+0x276/0x560 [kvm]
   kvm_vm_release+0x25/0x30 [kvm]
   __fput+0x106/0x280
   ____fput+0x12/0x20
   task_work_run+0x86/0xb0
   do_exit+0x2e3/0x9c0
   do_group_exit+0xb1/0xc0
   __x64_sys_exit_group+0x1b/0x20
   do_syscall_64+0x41/0x90
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
   </TASK>
  CR2: ffffe38687000000

Fixes: 6defa24d3b12 ("KVM: SEV: Init target VMCBs in sev_migrate_from")
Cc: stable@vger.kernel.org
Cc: Peter Gonda <pgonda@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20230825022357.2852133-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Don't inject #UD if KVM attempts to skip SEV guest insn

commit cb49631ad111570f1bad37702c11c2ae07fa2e3c upstream.

Don't inject a #UD if KVM attempts to "emulate" to skip an instruction
for an SEV guest, and instead resume the guest and hope that it can make
forward progress. When commit 04c40f344def ("KVM: SVM: Inject #UD on
attempted emulation for SEV guest w/o insn buffer") added the completely
arbitrary #UD behavior, there were no known scenarios where a well-behaved
guest would induce a VM-Exit that triggered emulation, i.e. it was thought
that injecting #UD would be helpful.

However, now that KVM (correctly) attempts to re-inject INT3/INTO, e.g. if
a #NPF is encountered when attempting to deliver the INT3/INTO, an SEV
guest can trigger emulation without a buffer, through no fault of its own.
Resuming the guest and retrying the INT3/INTO is architecturally wrong,
e.g. the vCPU will incorrectly re-hit code #DBs, but for SEV guests there
is literally no other option that has a chance of making forward progress.

Drop the #UD injection for all "skip" emulation, not just those related to
INT3/INTO, even though that means that the guest will likely end up in an
infinite loop instead of getting a #UD (the vCPU may also crash, e.g. if
KVM emulated everything about an instruction except for advancing RIP).
There's no evidence that suggests that an unexpected #UD is actually
better than hanging the vCPU, e.g. a soft-hung vCPU can still respond to
IRQs and NMIs to generate a backtrace.

Reported-by: Wu Zongyo <wuzongyo@mail.ustc.edu.cn>
Closes: https://lore.kernel.org/all/8eb933fd-2cf3-d7a9-32fe-2a1d82eac42a@mail.ustc.edu.cn
Fixes: 6ef88d6e36c2 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
Cc: stable@vger.kernel.org
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230825013621.2845700-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Take and hold ir_list_lock when updating vCPU's Physical ID entry

commit 4c08e737f056fec930b416a2bd37ed266d724f95 upstream.

Hoist the acquisition of ir_list_lock from avic_update_iommu_vcpu_affinity()
to its two callers, avic_vcpu_load() and avic_vcpu_put(), specifically to
encapsulate the write to the vCPU's entry in the AVIC Physical ID table.
This will allow a future fix to pull information from the Physical ID entry
when updating the IRTE, without potentially consuming stale information,
i.e. without racing with the vCPU being (un)loaded.

Add a comment to call out that ir_list_lock does NOT protect against
multiple writers, specifically that reading the Physical ID entry in
avic_vcpu_put() outside of the lock is safe.

To preserve some semblance of independence from ir_list_lock, keep the
READ_ONCE() in avic_vcpu_load() even though acuiring the spinlock
effectively ensures the load(s) will be generated after acquiring the
lock.

Cc: stable@vger.kernel.org
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230808233132.2499764-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: prevent potential division by zero errors

commit 07e388aab042774f284a2ad75a70a194517cdad4 upstream.

There are two places in apply_below_the_range() where it's possible for
a divide by zero error to occur. So, to fix this make sure the divisor
is non-zero before attempting the computation in both cases.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637
Fixes: a463b263032f ("drm/amd/display: Fix frames_to_insert math")
Fixes: ded6119e825a ("drm/amd/display: Reinstate LFC optimization")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma

commit 57a943ebfcdb4a97fbb409640234bdb44bfa1953 upstream.

For DRM legacy gamma, AMD display manager applies implicit sRGB degamma
using a pre-defined sRGB transfer function. It works fine for DCN2
family where degamma ROM and custom curves go to the same color block.
But, on DCN3+, degamma is split into two blocks: degamma ROM for
pre-defined TFs and `gamma correction` for user/custom curves and
degamma ROM settings doesn't apply to cursor plane. To get DRM legacy
gamma working as expected, enable cursor degamma ROM for implict sRGB
degamma on HW with this configuration.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Fixes: 96b020e2163f ("drm/amd/display: check attr flag before set cursor degamma on DCN3+")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller

commit 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b upstream.

v7.2 controller has different ECC level field size and shift in the acc
control register than its predecessor and successor controller. It needs
to be set specifically.

Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: brcmnand: Fix potential false time out warning

commit 9cc0a598b944816f2968baf2631757f22721b996 upstream.

If system is busy during the command status polling function, the driver
may not get the chance to poll the status register till the end of time
out and return the premature status. Do a final check after time out
happens to ensure reading the correct status.

Fixes: 9d2ee0a60b8b ("mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-3-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: Correct flags for Winbond w25q128

commit 83e824a4a595132f9bd7ac4f5afff857bfc5991e upstream.

The Winbond "w25q128" (actual vendor name W25Q128JV) has
exactly the same flags as the sibling device "w25q128jv".
The devices both require unlocking to enable write access.

The actual product naming between devices vs the Linux
strings in winbond.c:

0xef4018: "w25q128"   W25Q128JV-IN/IQ/JQ
0xef7018: "w25q128jv" W25Q128JV-IM/JM

The latter device, "w25q128jv" supports features named DTQ
and QPI, otherwise it is the same.

Not having the right flags has the annoying side effect
that write access does not work.

After this patch I can write to the flash on the Inteno
XG6846 router.

The flash memory also supports dual and quad SPI modes.
This does not currently manifest, but by turning on SFDP
parsing, the right SPI modes are emitted in
/sys/kernel/debug/spi-nor/spi1.0/capabilities
for this chip, so we also turn on this.

Since we now have determined that SFDP parsing works on
the device, we also detect the geometry using SFDP.

After this dmesg and sysfs says:
[    1.062401] spi-nor spi1.0: w25q128 (16384 Kbytes)
cat erasesize
65536
(16384*1024)/65536 = 256 sectors

spi-nor sysfs:
cat jedec_id
ef4018
cat manufacturer
winbond
cat partname
w25q128
hexdump -v -C sfdp
00000000  53 46 44 50 05 01 00 ff  00 05 01 10 80 00 00 ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000030  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000040  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000050  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000060  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000070  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000080  e5 20 f9 ff ff ff ff 07  44 eb 08 6b 08 3b 42 bb
00000090  fe ff ff ff ff ff 00 00  ff ff 40 eb 0c 20 0f 52
000000a0  10 d8 00 00 36 02 a6 00  82 ea 14 c9 e9 63 76 33
000000b0  7a 75 7a 75 f7 a2 d5 5c  19 f7 4d ff e9 30 f8 80

Cc: stable@vger.kernel.org
Suggested-by: Michael Walle <michael@walle.cc>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230718-spi-nor-winbond-w25q128-v5-1-a73653ee46c3@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write

commit 5d53244186c9ac58cb88d76a0958ca55b83a15cd upstream.

When the oob buffer length is not in multiple of words, the oob write
function does out-of-bounds read on the oob source buffer at the last
iteration. Fix that by always checking length limit on the oob buffer
read and fill with 0xff when reaching the end of the buffer to the oob
registers.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-5-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: brcmnand: Fix crash during the panic_write

commit e66dd317194daae0475fe9e5577c80aa97f16cb9 upstream.

When executing a NAND command within the panic write path, wait for any
pending command instead of calling BUG_ON to avoid crashing while
already crashing.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Kursad Oney <kursad.oney@broadcom.com>
Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-4-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()

commit aa656d48e871a1b062e1bbf9474d8b831c35074c upstream.

When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing). Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead.

Fixes: cb285a5348e7 ("drm: mxsfb: Replace mxsfb_get_fb_paddr() with drm_fb_cma_get_gem_addr()")
Cc: stable@vger.kernel.org # 5.19+
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230612092359.784115-1-victor.liu@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: use the correct superblock to compare fsid in btrfs_validate_super

commit d167aa76dc0683828588c25767da07fb549e4f48 upstream.

The function btrfs_validate_super() should verify the fsid in the provided
superblock argument. Because, all its callers expect it to do that.

Such as in the following stack:

   write_all_supers()
       sb = fs_info->super_for_commit;
       btrfs_validate_write_super(.., sb)
         btrfs_validate_super(.., sb, ..)

   scrub_one_super()
btrfs_validate_super(.., sb, ..)

And
   check_dev_super()
btrfs_validate_super(.., sb, ..)

However, it currently verifies the fs_info::super_copy::fsid instead,
which is not correct.  Fix this using the correct fsid in the superblock
argument.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: re-enable metadata over-commit for zoned mode

commit 5b135b382a360f4c87cf8896d1465b0b07f10cb0 upstream.

Now that, we can re-enable metadata over-commit. As we moved the activation
from the reservation time to the write time, we no longer need to ensure
all the reserved bytes is properly activated.

Without the metadata over-commit, it suffers from lower performance because
it needs to flush the delalloc items more often and allocate more block
groups. Re-enabling metadata over-commit will solve the issue.

Fixes: 79417d040f4f ("btrfs: zoned: disable metadata overcommit for zoned")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: set page extent mapped after read_folio in relocate_one_page

commit e7f1326cc24e22b38afc3acd328480a1183f9e79 upstream.

One of the CI runs triggered the following panic

  assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/subpage.c:229!
  Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
  CPU: 0 PID: 923660 Comm: btrfs Not tainted 6.5.0-rc3+ #1
  pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
  pc : btrfs_subpage_assert+0xbc/0xf0
  lr : btrfs_subpage_assert+0xbc/0xf0
  sp : ffff800093213720
  x29: ffff800093213720 x28: ffff8000932138b4 x27: 000000000c280000
  x26: 00000001b5d00000 x25: 000000000c281000 x24: 000000000c281fff
  x23: 0000000000001000 x22: 0000000000000000 x21: ffffff42b95bf880
  x20: ffff42b9528e0000 x19: 0000000000001000 x18: ffffffffffffffff
  x17: 667274622f736620 x16: 6e69202c65746176 x15: 0000000000000028
  x14: 0000000000000003 x13: 00000000002672d7 x12: 0000000000000000
  x11: ffffcd3f0ccd9204 x10: ffffcd3f0554ae50 x9 : ffffcd3f0379528c
  x8 : ffff800093213428 x7 : 0000000000000000 x6 : ffffcd3f091771e8
  x5 : ffff42b97f333948 x4 : 0000000000000000 x3 : 0000000000000000
  x2 : 0000000000000000 x1 : ffff42b9556cde80 x0 : 000000000000004f
  Call trace:
   btrfs_subpage_assert+0xbc/0xf0
   btrfs_subpage_set_dirty+0x38/0xa0
   btrfs_page_set_dirty+0x58/0x88
   relocate_one_page+0x204/0x5f0
   relocate_file_extent_cluster+0x11c/0x180
   relocate_data_extent+0xd0/0xf8
   relocate_block_group+0x3d0/0x4e8
   btrfs_relocate_block_group+0x2d8/0x490
   btrfs_relocate_chunk+0x54/0x1a8
   btrfs_balance+0x7f4/0x1150
   btrfs_ioctl+0x10f0/0x20b8
   __arm64_sys_ioctl+0x120/0x11d8
   invoke_syscall.constprop.0+0x80/0xd8
   do_el0_svc+0x6c/0x158
   el0_svc+0x50/0x1b0
   el0t_64_sync_handler+0x120/0x130
   el0t_64_sync+0x194/0x198
  Code: 91098021 b0007fa0 91346000 97e9c6d2 (d4210000)

This is the same problem outlined in 17b17fcd6d44 ("btrfs:
set_page_extent_mapped after read_folio in btrfs_cont_expand") , and the
fix is the same.  I originally looked for the same pattern elsewhere in
our code, but mistakenly skipped over this code because I saw the page
cache readahead before we set_page_extent_mapped, not realizing that
this was only in the !page case, that we can still end up with a
!uptodate page and then do the btrfs_read_folio further down.

The fix here is the same as the above mentioned patch, move the
set_page_extent_mapped call to after the btrfs_read_folio() block to
make sure that we have the subpage blocksize stuff setup properly before
using the page.

CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't start transaction when joining with TRANS_JOIN_NOSTART

commit 4490e803e1fe9fab8db5025e44e23b55df54078b upstream.

When joining a transaction with TRANS_JOIN_NOSTART, if we don't find a
running transaction we end up creating one. This goes against the purpose
of TRANS_JOIN_NOSTART which is to join a running transaction if its state
is at or below the state TRANS_STATE_COMMIT_START, otherwise return an
-ENOENT error and don't start a new transaction. So fix this to not create
a new transaction if there's no running transaction at or below that
state.

CC: stable@vger.kernel.org # 4.14+
Fixes: a6d155d2e363 ("Btrfs: fix deadlock between fiemap and transaction commits")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: free qgroup rsv on io failure

commit e28b02118b94e42be3355458a2406c6861e2dd32 upstream.

If we do a write whose bio suffers an error, we will never reclaim the
qgroup reserved space for it. We allocate the space in the write_iter
codepath, then release the reservation as we allocate the ordered
extent, but we only create a delayed ref if the ordered extent finishes.
If it has an error, we simply leak the rsv. This is apparent in running
any error injecting (dmerror) fstests like btrfs/146 or btrfs/160. Such
tests fail due to dmesg on umount complaining about the leaked qgroup
data space.

When we clean up other aspects of space on failed ordered_extents, also
free the qgroup rsv.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix start transaction qgroup rsv double free

commit a6496849671a5bc9218ecec25a983253b34351b1 upstream.

btrfs_start_transaction reserves metadata space of the PERTRANS type
before it identifies a transaction to start/join. This allows flushing
when reserving that space without a deadlock. However, it results in a
race which temporarily breaks qgroup rsv accounting.

T1                                              T2
start_transaction
do_stuff
                                            start_transaction
                                                qgroup_reserve_meta_pertrans
commit_transaction
    qgroup_free_meta_all_pertrans
                                            hit an error starting txn
                                            goto reserve_fail
                                            qgroup_free_meta_pertrans (already freed!)

The basic issue is that there is nothing preventing another commit from
committing before start_transaction finishes (in fact sometimes we
intentionally wait for it) so any error path that frees the reserve is
at risk of this race.

While this exact space was getting freed anyway, and it's not a huge
deal to double free it (just a warning, the free code catches this), it
can result in incorrectly freeing some other pertrans reservation in
this same reservation, which could then lead to spuriously granting
reservations we might not have the space for. Therefore, I do believe it
is worth fixing.

To fix it, use the existing prealloc->pertrans conversion mechanism.
When we first reserve the space, we reserve prealloc space and only when
we are sure we have a transaction do we convert it to pertrans. This way
any racing commits do not blow away our reservation, but we still get a
pertrans reservation that is freed when _this_ transaction gets committed.

This issue can be reproduced by running generic/269 with either qgroups
or squotas enabled via mkfs on the scratch device.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: do not zone finish data relocation block group

commit 332581bde2a419d5f12a93a1cdc2856af649a3cc upstream.

When multiple writes happen at once, we may need to sacrifice a currently
active block group to be zone finished for a new allocation. We choose a
block group with the least free space left, and zone finish it.

To do the finishing, we need to send IOs for already allocated region
and wait for them and on-going IOs. Otherwise, these IOs fail because the
zone is already finished at the time the IO reach a device.

However, if a block group dedicated to the data relocation is zone
finished, there is a chance that finishing it before an ongoing write IO
reaches the device. That is because there is timing gap between an
allocation is done (block_group->reservations == 0, as pre-allocation is
done) and an ordered extent is created when the relocation IO starts.
Thus, if we finish the zone between them, we can fail the IOs.

We cannot simply use "fs_info->data_reloc_bg == block_group->start" to
avoid the zone finishing. Because, the data_reloc_bg may already switch to
a new block group, while there are still ongoing write IOs to the old
data_reloc_bg.

So, this patch reworks the BLOCK_GROUP_FLAG_ZONED_DATA_RELOC bit to
indicate there is a data relocation allocation and/or ongoing write to the
block group. The bit is set on allocation and cleared in end_io function of
the last IO for the currently allocated region.

To change the timing of the bit setting also solves the issue that the bit
being left even after there is no IO going on. With the current code, if
the data_reloc_bg switches after the last IO to the current data_reloc_bg,
the bit is set at this timing and there is no one clearing that bit. As a
result, that block group is kept unallocatable for anything.

Fixes: 343d8a30851c ("btrfs: zoned: prevent allocation from previous data relocation BG")
Fixes: 74e91b12b115 ("btrfs: zoned: zone finish unused block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: nlookup missing decrement in fuse_direntplus_link

commit b8bd342d50cbf606666488488f9fea374aceb2d5 upstream.

During our debugging of glusterfs, we found an Assertion failed error:
inode_lookup >= nlookup, which was caused by the nlookup value in the
kernel being greater than that in the FUSE file system.

The issue was introduced by fuse_direntplus_link, where in the function,
fuse_iget increments nlookup, and if d_splice_alias returns failure,
fuse_direntplus_link returns failure without decrementing nlookup
https://github.com/gluster/glusterfs/pull/4081

Signed-off-by: ruanmeisi <ruan.meisi@zte.com.cn>
Fixes: 0b05b18381ee ("fuse: implement NFS-like readdirplus support")
Cc: <stable@vger.kernel.org> # v3.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: pata_ftide010: Add missing MODULE_DESCRIPTION

commit 7274eef5729037300f29d14edeb334a47a098f65 upstream.

Add the missing MODULE_DESCRIPTION() to avoid warnings such as:

WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/pata_ftide010.o

when compiling with W=1.

Fixes: be4e456ed3a5 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: sata_gemini: Add missing MODULE_DESCRIPTION

commit 8566572bf3b4d6e416a4bf2110dbb4817d11ba59 upstream.

Add the missing MODULE_DESCRIPTION() to avoid warnings such as:

WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/sata_gemini.o

when compiling with W=1.

Fixes: be4e456ed3a5 ("ata: Add driver for Faraday Technology FTIDE010")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ata: pata_falcon: fix IO base selection for Q40

commit 8a1f00b753ecfdb117dc1a07e68c46d80e7923ea upstream.

With commit 44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver
with pata_falcon and falconide"), the Q40 IDE driver was
replaced by pata_falcon.c.

Both IO and memory resources were defined for the Q40 IDE
platform device, but definition of the IDE register addresses
was modeled after the Falcon case, both in use of the memory
resources and in including register shift and byte vs. word
offset in the address.

This was correct for the Falcon case, which does not apply
any address translation to the register addresses. In the
Q40 case, all of device base address, byte access offset
and register shift is included in the platform specific
ISA access translation (in asm/mm_io.h).

As a consequence, such address translation gets applied
twice, and register addresses are mangled.

Use the device base address from the platform IO resource
for Q40 (the IO address translation will then add the correct
ISA window base address and byte access offset), with register
shift 1. Use MMIO base address and register shift 2 as before
for Falcon.

Encode PIO_OFFSET into IO port addresses for all registers
for Q40 except the data transfer register. Encode the MMIO
offset there (pata_falcon_data_xfer() directly uses raw IO
with no address translation).

Reported-by: William R Sowerbutts <will@sowerbutts.com>
Closes: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com
Link: https://lore.kernel.org/r/CAMuHMdUU62jjunJh9cqSqHT87B0H0A4udOOPs=WN7WZKpcagVA@mail.gmail.com
Fixes: 44b1fbc0f5f3 ("m68k/q40: Replace q40ide driver with pata_falcon and falconide")
Cc: stable@vger.kernel.org
Cc: Finn Thain <fthain@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: William R Sowerbutts <will@sowerbutts.com>
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>