Lennart Poettering [Tue, 26 Apr 2016 13:47:55 +0000 (15:47 +0200)]
journal: when creating a new journal file, fsync() the directory it is created in too
Fixes: #2831
Lennart Poettering [Tue, 26 Apr 2016 13:47:03 +0000 (15:47 +0200)]
update TODO a bit
Lennart Poettering [Tue, 26 Apr 2016 13:08:06 +0000 (15:08 +0200)]
man: minor wording fixes
As suggested in:
https://github.com/systemd/systemd/pull/3124#discussion_r61068789
Lennart Poettering [Tue, 26 Apr 2016 13:06:28 +0000 (15:06 +0200)]
vimrc: fix indentation logic for our docbook xml files
Make sure TAB results in 2ch indenting as we commonly use for our docbook XML
files.
Lubomir Rintel [Fri, 29 Apr 2016 09:45:07 +0000 (11:45 +0200)]
parse-util: fix conversion from size_t on s390 (#3147)
On s390 size_t is an unsigned long, nor an unsigned int. They both are
of the same size and can be cast to each other safely, but the compiler
still seems unhappy about incompatible pointers.
Fixes:
7c2da2ca8
Lennart Poettering [Fri, 29 Apr 2016 08:40:15 +0000 (10:40 +0200)]
Merge pull request #3137 from keszybz/dirent-simplification
Various small cleanups in shared code
Evgeny Vereshchagin [Fri, 29 Apr 2016 08:38:35 +0000 (11:38 +0300)]
nspawn: convert uuid to string (#3146)
Fixes:
cp /etc/machine-id /var/tmp/systemd-test.HccKPa/nspawn-root/etc
systemd-nspawn -D /var/tmp/systemd-test.HccKPa/nspawn-root --link-journal host -b
...
Host and machine ids are equal (P�S!V): refusing to link journals
Susant Sahani [Thu, 28 Apr 2016 23:03:29 +0000 (04:33 +0530)]
networkd: reconfigure IPv6 and static address after link up event (#3105)
Now we are not setting static address, start dhcp6 client and
discovering IPv6 routers after link gained carrier.
This fixes #2912.
Zbigniew Jędrzejewski-Szmek [Thu, 28 Apr 2016 17:49:16 +0000 (13:49 -0400)]
basic/mount-util: recognize pvfs2 as network fs (#3140)
Added to kernel 4.6.
Evgeny Vereshchagin [Thu, 28 Apr 2016 17:48:17 +0000 (20:48 +0300)]
nspawn: initialize the veth_name (#3141)
Fixes:
$ systemd-nspawn -h
...
Failed to remove veth interface ����: Operation not permitted
This is a follow-up for
d2773e59de3dd970d861
Naohiro Aota [Thu, 28 Apr 2016 15:41:50 +0000 (00:41 +0900)]
cgtop: initialize `ours' to NULL properly (#3139)
Running cgtop on a system, which lacks expecting stat file, results in a
segfault. For example, a system with blkio tree but without cfq io scheduler,
lacks "blkio.io_service_bytes".
When the targeting cgroup's file does not exist, process() returns 0 and
also does not modify `*ret' value (which is `*ours'). As a result,
callers of refresh_one() can have bogus pointer, which result in SEGV.
This patch just properly initialize the variable to NULL.
Zbigniew Jędrzejewski-Szmek [Thu, 28 Apr 2016 12:24:53 +0000 (08:24 -0400)]
test: chmod +x sysv-generator-test
Just for convenience.
Zbigniew Jędrzejewski-Szmek [Thu, 28 Apr 2016 12:24:25 +0000 (08:24 -0400)]
test-path-util: add a trivial test for hidden_or_backup_file
Zbigniew Jędrzejewski-Szmek [Wed, 27 Apr 2016 13:24:59 +0000 (09:24 -0400)]
tree-wide: rename hidden_file to hidden_or_backup_file and optimize
In standard linux parlance, "hidden" usually means that the file name starts
with ".", and nothing else. Rename the function to convey what the function does
better to casual readers.
Stop exposing hidden_file_allow_backup which is rather ugly and rewrite
hidden_file to extract the suffix first. Note that hidden_file_allow_backup
excluded files with "~" at the end, which is quite confusing. Let's get
rid of it before it gets used in the wrong place.
muzena [Wed, 27 Apr 2016 12:32:21 +0000 (14:32 +0200)]
Add croatian translation, hr.po and systemd.hr.catalog files
Zbigniew Jędrzejewski-Szmek [Wed, 27 Apr 2016 12:59:12 +0000 (08:59 -0400)]
basic/dirent-util: do not call hidden_file_allow_backup from dirent_is_file_with_suffix
If the file name is supposed to end in a suffix, there's not need to check the
name against a list of "special" file names, which is slow. Instead, just check
that the name doens't start with a period.
Zbigniew Jędrzejewski-Szmek [Mon, 25 Apr 2016 01:20:26 +0000 (21:20 -0400)]
networkd: drop unnecessary stmt
Zbigniew Jędrzejewski-Szmek [Sun, 24 Apr 2016 15:31:19 +0000 (11:31 -0400)]
machinectl: simplify option string assignment
It's better to avoid having the option string duplicated, lest we forget
to modify them in sync in the future.
Martin Pitt [Wed, 27 Apr 2016 08:34:24 +0000 (10:34 +0200)]
Stop syslog.socket when entering emergency mode (#3130)
When enabling ForwardToSyslog=yes, the syslog.socket is active when entering
emergency mode. Any log message then triggers the start of rsyslog.service (or
other implementation) along with its dependencies such as local-fs.target and
sysinit.target. As these might fail themselves (e. g. faulty /etc/fstab), this
breaks the emergency mode.
This causes syslog.socket to fail with "Failed to queue service startup job:
Transition is destructive".
Add Conflicts=syslog.socket to emergency.service to make sure the socket is
stopped when emergency.service is started.
Fixes #266
Nalin Dahyabhai [Wed, 27 Apr 2016 08:32:05 +0000 (04:32 -0400)]
Correctly parse OBJECT_PID in journald messages (#3129)
The parse_pid() function doesn't succeed if we don't zero-terminate after the
last digit in the buffer.
Martin Pitt [Wed, 27 Apr 2016 07:58:42 +0000 (09:58 +0200)]
path-util: Add hidden suffixes for ucf (#3131)
ucf is a standard Debian helper for managing configuration file upgrades which
need more interaction or elaborate merging than conffiles managed by dpkg.
Ignore its temporary and backup files similarly to the *.dpkg-* ones to avoid
creating units for them in generators.
https://bugs.debian.org/775903
Vito Caputo [Wed, 27 Apr 2016 06:29:43 +0000 (23:29 -0700)]
journal: set STATE_ARCHIVED as part of offlining (#2740)
The only code path which makes a journal durable is via
journal_file_set_offline().
When we perform a rotate the journal's header->state is being set to
STATE_ARCHIVED prior to journal_file_set_offline() being called.
In journal_file_set_offline(), we short-circuit the entire offline when
f->header->state != STATE_ONLINE.
This all results in none of the journal_file_set_offline() fsync() calls
being reached when rotate archives a journal, so archived journals are
never explicitly made durable.
What we do now is instead of setting the f->header->state to
STATE_ARCHIVED directly in journal_file_rotate() prior to
journal_file_close(), we set an archive flag in f->archive for the
journal_file_set_offline() machinery to honor by committing
STATE_ARCHIVED instead of STATE_OFFLINE when set.
Prior to this, rotated journals were never getting fsync() explicitly
performed on them, since journal_file_set_offline() short-circuited.
Obviously this is undesirable, and depends entirely on the underlying
filesystem as to how much durability was achieved when simply closing
the file.
Note that this problem existed prior to the recent asynchronous fsync
changes, but those changes do facilitate our performing this durable
offline on rotate without blocking, regardless of the underlying
filesystem sync-on-close semantics.
tblume [Tue, 26 Apr 2016 15:10:36 +0000 (17:10 +0200)]
core: set start job timeout from the kernel commandline (#3112)
Add the boot parameter: systemd.default_timeout_start_sec to allow modification
of the default start job timeout at boot time.
Zbigniew Jędrzejewski-Szmek [Tue, 26 Apr 2016 13:52:55 +0000 (09:52 -0400)]
Merge pull request #3124 from poettering/small-journal-fixes
Zbigniew Jędrzejewski-Szmek [Tue, 26 Apr 2016 13:52:30 +0000 (09:52 -0400)]
Revert "smaller journal fixes (#3124)"
This reverts commit
6e3930c40f3379b7123e505a71ba4cd6db6c372f.
Merge got squashed by mistake.
Lennart Poettering [Tue, 26 Apr 2016 12:57:04 +0000 (14:57 +0200)]
Merge pull request #3093 from poettering/nspawn-userns-magic
nspawn automatic user namespaces
Lennart Poettering [Tue, 26 Apr 2016 12:38:45 +0000 (14:38 +0200)]
smaller journal fixes (#3124)
* sd-journal: detect earlier if we try to read an object from an invalid offset
Specifically, detect early if we try to read from offset 0, i.e. are using
uninitialized offset data.
* journal: when dumping journal contents, react nicer to lines we can't read
If journal files are not cleanly closed it might happen that intermediaery
journal entries cannot be read. Handle this nicely, skip over the unreadable
entries, and log a debug message about it; after all we generally follow the
logic that we try to make the best of corrupted files.
* journal-file: always generate the same error when encountering corrupted files
Let's make sure EBADMSG is the one error we throw when we encounter corrupted
data, so that we can neatly test for it.
* journal-file: when iterating through a partly corruped journal file, treat error like EOF
When we linearly iterate through a corrupted journal file, and we encounter a
read error, don't consider this fatal, but merely as EOF condition (and log
about it).
* journal-file: make seeking in corrupted files work
Previously, when we used a bisection table for seeking through a corrupted
file, and the end of the bisection table was corrupted we'd most likely fail
the entire seek operation. Improve the situation: if we encounter invalid
entries in a bisection table, linearly go backwards until we find a working
entry again.
* man: elaborate on the automatic systemd-journald.socket service dependencies
Fixes: #1603
Martin Pitt [Tue, 26 Apr 2016 10:16:43 +0000 (12:16 +0200)]
tests: document requirements of networkd integration tests (#3125)
Document the necessary dependencies and nspawn/lxd options to run
test/networkd-test.py.
Lennart Poettering [Tue, 26 Apr 2016 09:57:54 +0000 (11:57 +0200)]
man: elaborate on the automatic systemd-journald.socket service dependencies
Fixes: #1603
Lennart Poettering [Tue, 26 Apr 2016 09:39:48 +0000 (11:39 +0200)]
journal-file: make seeking in corrupted files work
Previously, when we used a bisection table for seeking through a corrupted
file, and the end of the bisection table was corrupted we'd most likely fail
the entire seek operation. Improve the situation: if we encounter invalid
entries in a bisection table, linearly go backwards until we find a working
entry again.
Lennart Poettering [Tue, 26 Apr 2016 09:38:39 +0000 (11:38 +0200)]
journal-file: when iterating through a partly corruped journal file, treat error like EOF
When we linearly iterate through a corrupted journal file, and we encounter a
read error, don't consider this fatal, but merely as EOF condition (and log
about it).
Lennart Poettering [Tue, 26 Apr 2016 09:37:22 +0000 (11:37 +0200)]
journal-file: always generate the same error when encountering corrupted files
Let's make sure EBADMSG is the one error we throw when we encounter corrupted
data, so that we can neatly test for it.
Lennart Poettering [Mon, 25 Apr 2016 19:43:12 +0000 (21:43 +0200)]
journal: when dumping journal contents, react nicer to lines we can't read
If journal files are not cleanly closed it might happen that intermediaery
journal entries cannot be read. Handle this nicely, skip over the unreadable
entries, and log a debug message about it; after all we generally follow the
logic that we try to make the best of corrupted files.
Lennart Poettering [Mon, 25 Apr 2016 19:42:15 +0000 (21:42 +0200)]
sd-journal: detect earlier if we try to read an object from an invalid offset
Specifically, detect early if we try to read from offset 0, i.e. are using
uninitialized offset data.
Zbigniew Jędrzejewski-Szmek [Tue, 26 Apr 2016 09:19:10 +0000 (05:19 -0400)]
systemd --user: call pam_loginuid when creating user@.service (#3120)
This way the user service will have a loginuid, and it will be inherited by
child services. This shouldn't change anything as far as systemd itself is
concerned, but is nice for various services spawned from by systemd --user
that expect a loginuid.
pam_loginuid(8) says that it should be enabled for "..., crond and atd".
user@.service should behave similarly to those two as far as audit is
concerned.
https://bugzilla.redhat.com/show_bug.cgi?id=1328947#c28
Zbigniew Jędrzejewski-Szmek [Mon, 25 Apr 2016 19:57:36 +0000 (15:57 -0400)]
Merge pull request #3109 from poettering/journal-by-fd
rework "journalctl -M"
Zbigniew Jędrzejewski-Szmek [Mon, 25 Apr 2016 19:56:17 +0000 (15:56 -0400)]
Merge pull request #3114 from poettering/journalctl-b
Fix endless loops in journalctl --list-boots (closes #617).
EMOziko [Mon, 25 Apr 2016 19:42:35 +0000 (23:42 +0400)]
Hp Folio 1040g2 micmute and toggle touchpad fn keys fix (#3118)
Added HP Folio 1040g2 Fn+F8 MICMUTE FIx
Lennart Poettering [Mon, 25 Apr 2016 19:38:56 +0000 (21:38 +0200)]
machined: add CAP_MKNOD to capabilities to run with (#3116)
Container images from Debian or suchlike contain device nodes in /dev. Let's
make sure we can clone them properly, hence pass CAP_MKNOD to machined.
Fixes: #2867 #465
Lennart Poettering [Mon, 25 Apr 2016 19:37:51 +0000 (21:37 +0200)]
machined: generate a nicer error when the user tries "machinectl clone" on non-btrfs file systems (#3117)
Fixes: #2060
(Of course, in the long run, we should probably add a copy-based fall-back. But
given how slow that is, this probably requires some asynchronous forking logic
like the CopyFrom() and CopyTo() method calls already implement.)
Lennart Poettering [Mon, 25 Apr 2016 19:36:25 +0000 (21:36 +0200)]
core: fix description of "resources" service error (#3119)
The "resources" error is really just the generic error we return when
we hit some kind of error and we have no more appropriate error for the case to
return, for example because of some OS error.
Hence, reword the explanation and don't claim any relation to resource limits.
Admittedly, the "resources" service error is a bit of a misnomer, but I figure
it's kind of API now.
Fixes: #2716
Lennart Poettering [Mon, 25 Apr 2016 18:02:03 +0000 (20:02 +0200)]
Merge pull request #3113 from ssahani/route-fix
netwotkd: fix address and route conf
Vito Caputo [Mon, 25 Apr 2016 17:58:16 +0000 (10:58 -0700)]
journal: fix already offline check and thread leak (#2810)
Early in journal_file_set_offline() f->header->state is tested to see if
it's != STATE_ONLINE, and since there's no need to do anything if the
journal isn't online, the function simply returned here.
Since moving part of the offlining process to a separate thread, there
are two problems here:
1. We can't simply check f->header->state, because if there is an
offline thread active it may modify f->header->state.
2. Even if the journal is deemed offline, the thread responsible may
still need joining, so a bare return may leak the thread's resources
like its stack.
To address #1, the helper journal_file_is_offlining() is called prior to
accessing f->header->state.
If journal_file_is_offlining() returns true, f->header->state isn't even
checked, because an offlining journal is obviously online, and we'll
just continue with the normal set offline code path.
If journal_file_is_offlining() returns false, then it's safe to check
f->header->state, because the offline_state is beyond the point of
modifying f->header->state, and there's a memory barrier in the helper.
If we find f->header->state is != STATE_ONLINE, then we call the
idempotent journal_file_set_offline_thread_join() on the way out of the
function, to join a potential lingering offline thread.
Lennart Poettering [Mon, 25 Apr 2016 09:57:56 +0000 (11:57 +0200)]
journalctl: turn --unit= in combination with --user into --user-unit=
Let's be nice to users, and let's turn the nonsensical "--unit=… --user" into
"--user-unit=…" which the user more likely meant.
Fixes #1621
Lennart Poettering [Mon, 25 Apr 2016 09:39:38 +0000 (11:39 +0200)]
man: document the new by-fd journal calls
Also, remove documentation for sd_journal_open_container() as we consider it
deprecated now.
Lennart Poettering [Mon, 25 Apr 2016 09:36:37 +0000 (11:36 +0200)]
man: don't include history sections in man pages
I am pretty sure we shouldn't carry history sections in man pages, since it's
very hard to keep them correctly updated, the current ones are very
out-of-date, and they tend to make APIs appear unnecessarily complex.
Lennart Poettering [Mon, 25 Apr 2016 09:31:47 +0000 (11:31 +0200)]
sd-journal: "soft" deprecate sd_journal_open_container()
Let's document the call as deprecated, since it doesn't cover containers with
directories that aren#t visible to the host properly.
Lennart Poettering [Mon, 25 Apr 2016 09:21:46 +0000 (11:21 +0200)]
journalctl: port --machine= switch to use machined's OpenMachineRootDirectory()
This way, the switch becomes compatible with nspawn containers using --image=,
and those which only store journal data in /run (i.e. have persistant logs
off).
Fixes: #49
Lennart Poettering [Mon, 25 Apr 2016 16:08:42 +0000 (18:08 +0200)]
journalctl: don't trust the per-field entry tables when looking for boot IDs
When appending to a journal file, journald will:
a) first, append the actual entry to the end of the journal file
b) second, add an offset reference to it to the global entry array stored at
the beginning of the file
c) third, add offset references to it to the per-field entry array stored at
various places of the file
The global entry array, maintained by b) is used when iterating through the
journal without matches applied.
The per-field entry array maintained by c) is used when iterating through the
journal with a match for that specific field applied.
In the wild, there are journal files where a) and b) were completed, but c)
was not before the files were abandoned. This means, that in some cases log
entries are at the end of these files that appear in the global entry array,
but not in the per-field entry array of the _BOOT_ID= field. Now, the
"journalctl --list-boots" command alternatingly uses the global entry array
and the per-field entry array of the _BOOT_ID= field. It seeks to the last
entry of a specific _BOOT_ID=field by having the right match installed, and
then jumps to the next following entry with no match installed anymore, under
the assumption this would bring it to the next boot ID. However, if the
per-field entry wasn't written fully, it might actually turn out that the
global entry array might know one more entry with the same _BOOT_ID, thus
resulting in a indefinite loop around the same _BOOT_ID.
This patch fixes that, by updating the boot search logic to always continue
reading entries until the boot ID actually changed from the previous. Thus, the
per-field entry array is used as quick jump index (i.e. as an optimization),
but not trusted otherwise. Only the global entry array is trusted.
This replaces PR #1904, which is actually very similar to this one. However,
this one actually reads the boot ID directly from the entry header, and doesn't
try to read it at all until the read pointer is actually really located on the
first item to read.
Fixes: #617
Replaces: #1904
Lennart Poettering [Mon, 25 Apr 2016 16:06:47 +0000 (18:06 +0200)]
journalctl: improve output of --header a bit
Show the various timestamps in hexadecimal too. This is useful for matching the
timestamps included in cursor strings (which are encoded in hex, too), with the
references in the journal header.
Lennart Poettering [Mon, 25 Apr 2016 15:36:51 +0000 (17:36 +0200)]
nspawn: explicitly remove veth links after use (#3111)
* sd-netlink: permit RTM_DELLINK messages with no ifindex
This is useful for removing network interfaces by name.
* nspawn: explicitly remove veth links we created after use
Sometimes the kernel keeps veth links pinned after the namespace they have been
joined to died. Let's hence explicitly remove veth links after use.
Fixes: #2173
Lennart Poettering [Mon, 25 Apr 2016 14:37:09 +0000 (16:37 +0200)]
journalctl: simplify discover_next_boot() a bit
Drop the "read_realtime" parameter. Getting the realtime timestamp from an
entry is cheap, as it is a normal header field, hence let's just get this
unconditionally, and simplify our code a bit.
Lennart Poettering [Mon, 25 Apr 2016 14:24:05 +0000 (16:24 +0200)]
journalctl: simplify get_boots() a bit, by getting rid of one BootId object
Let's store the reference as simple sd_id128_t, since we don't actually need a
BootId for it.
Lennart Poettering [Mon, 25 Apr 2016 14:23:29 +0000 (16:23 +0200)]
journalctl: add some explanatory comments to get_boots()
Lennart Poettering [Mon, 25 Apr 2016 09:16:08 +0000 (11:16 +0200)]
sd-journal: add logic to open journal files of a specific OS tree
With this change a new flag SD_JOURNAL_OS_ROOT is introduced. If specified
while opening the journal with the per-directory calls (specifically:
sd_journal_open_directory() and sd_journal_open_directory_fd()) the passed
directory is assumed to be the root directory of an OS tree, and the journal
files are searched for in /var/log/journal, /run/log/journal relative to it.
This is useful to allow usage of sd-journal on file descriptors returned by the
OpenRootDirectory() call of machined.
Lennart Poettering [Mon, 25 Apr 2016 09:13:16 +0000 (11:13 +0200)]
machined: add new OpenRootDirectory() call to Machine objects
This new call returns a file descriptor for the root directory of a container.
This file descriptor may then be used to access the rest of the container's
file system, via openat() and similar calls. Since the file descriptor returned
is for the file system namespace inside of the container it may be used to
access all files of the container exactly the way the container itself would
see them. This is particularly useful for containers run directly from
loopback media, for example via systemd-nspawn's --image= switch. It also
provides access to directories such as /run of a container that are normally
not accessible to the outside of a container.
This replaces PR #2870.
Fixes: #2870
Lennart Poettering [Sun, 24 Apr 2016 22:31:24 +0000 (00:31 +0200)]
sd-journal: add API for opening journal files or directories by fd
Also, expose this via the "journalctl --file=-" syntax for STDIN. This feature
remains undocumented though, as it is probably not too useful in real-life as
this still requires fds that support mmaping and seeking, i.e. does not work
for pipes, for which reading from STDIN is most commonly used.
Lennart Poettering [Mon, 25 Apr 2016 10:48:05 +0000 (12:48 +0200)]
nspawn: when readjusting UID/GID ownership of OS trees, skip read-only subtrees
This should allow tools like rkt to pre-mount read-only subtrees in the OS
tree, without breaking the patching code.
Note that the code will still fail, if the top-level directory is already
read-only.
Lennart Poettering [Fri, 22 Apr 2016 16:10:16 +0000 (18:10 +0200)]
nspawn: don't try to patch UIDs/GIDs of procfs and suchlike
Lennart Poettering [Fri, 22 Apr 2016 12:12:27 +0000 (14:12 +0200)]
units: turn on user namespace by default in systemd-nspawn@.service
Now that user namespacing is supported in a pretty automatic way, actually turn
it on by default if the systemd-nspawn@.service template is used.
Lennart Poettering [Fri, 22 Apr 2016 12:10:09 +0000 (14:10 +0200)]
nspawn: make -U a tiny bit smarter
With this change -U will turn on user namespacing only if the kernel actually
supports it and otherwise gracefully degrade to non-userns mode.
Lennart Poettering [Fri, 22 Apr 2016 11:46:23 +0000 (13:46 +0200)]
man: document the new user namespacing options
Lennart Poettering [Fri, 22 Apr 2016 11:02:53 +0000 (13:02 +0200)]
nspawn: allow configuration of user namespaces in .nspawn files
In order to implement this we change the bool arg_userns into an enum
UserNamespaceMode, which can take one of NO, PICK or FIXED, and replace the
arg_uid_range_pick bool with it.
Lennart Poettering [Fri, 22 Apr 2016 09:47:35 +0000 (11:47 +0200)]
nspawn: add -U as shortcut for --private-users=pick
Given that user namespacing is pretty useful now, let's add a shortcut command
line switch for the logic.
Lennart Poettering [Fri, 22 Apr 2016 09:28:09 +0000 (11:28 +0200)]
nspawn: optionally, automatically allocate a UID/GID range for userns containers
This adds the new value "pick" to --private-users=. When specified a new
UID/GID range of 65536 users is automatically and randomly allocated from the
host range 0x00080000-0xDFFF0000 and used for the container. The setting
implies --private-users-chown, so that container directory is recursively
chown()ed to the newly allocated UID/GID range, if that's necessary. As an
optimization before picking a randomized UID/GID the UID of the container's
root directory is used as starting point and used if currently not used
otherwise.
To protect against using the same UID/GID range multiple times a few mechanisms
are in place:
- The first and the last UID and GID of the range are checked with getpwuid()
and getgrgid(). If an entry already exists a different range is picked. Note
that by "last" UID the user 65534 is used, as 65535 is the 16bit (uid_t) -1.
- A lock file for the range is taken in /run/systemd/nspawn-uid/. Since the
ranges are taken in a non-overlapping fashion, and always start on 64K
boundaries this allows us to maintain a single lock file for each range that
can be randomly picked. This protects nspawn from picking the same range in
two parallel instances.
- If possible the /etc/passwd lock file is taken while a new range is selected
until the container is up. This means adduser/addgroup should safely avoid
the range as long as nss-mymachines is used, since the allocated range will
then show up in the user database.
The UID/GID range nspawn picks from is compiled in and not configurable at the
moment. That should probably stay that way, since we already provide ways how
users can pick their own ranges manually if they don't like the automatic
logic.
The new --private-users=pick logic makes user namespacing pretty useful now, as
it relieves the user from managing UID/GID ranges.
Lennart Poettering [Wed, 20 Apr 2016 20:53:39 +0000 (22:53 +0200)]
nspawn: optionally fix up OS tree uid/gids for userns
This adds a new --private-userns-chown switch that may be used in combination
with --private-userns. If it is passed a recursive chmod() operation is run on
the OS tree, fixing all file owner UID/GIDs to the right ranges. This should
make user namespacing pretty workable, as the OS trees don't need to be
prepared manually anymore.
Lennart Poettering [Thu, 21 Apr 2016 10:47:36 +0000 (12:47 +0200)]
util: copy_file_range() returns EBADF when used on a tty
In nspawn we invoke copy_bytes() on a TTY fd. copy_file_range() returns EBADF
on a TTY and this error is considered fatal by copy_bytes() so far. Correct
that, so that nspawn's copy_bytes() operation works again.
This is a follow-up for
a44202e98b638024c45e50ad404c7069c7835c04.
Lennart Poettering [Sun, 24 Apr 2016 22:26:41 +0000 (00:26 +0200)]
sd-journal: minor simplification
Lennart Poettering [Sun, 24 Apr 2016 22:25:04 +0000 (00:25 +0200)]
journalctl: improve error message when we have trouble reading journal files
Let's output the actual error code encountered, and let's not claim this was
purely triggered by files, because it can also be triggered by directories.
Lennart Poettering [Sun, 24 Apr 2016 22:23:45 +0000 (00:23 +0200)]
sd-journal: properly collect errors from readdir()
Let's also collect errors returned by readdir() into our set of errors, like we
do this for all other errors from journal files.
Lennart Poettering [Sun, 24 Apr 2016 22:18:27 +0000 (00:18 +0200)]
journal: add inotify watches by-fd instead of by-path
This is slightly nicer, since we actually watch the directories we opened and
enumerate. However, primarily this is preparation for adding support for
opening journal files by fd without specifying any path, to be added in a later
commit.
Susant Sahani [Mon, 25 Apr 2016 07:08:56 +0000 (12:38 +0530)]
networkd: Address- initialize the node before adding to list.
It make more sense to initalize the node first then
we add to the list.
Susant Sahani [Mon, 25 Apr 2016 07:07:10 +0000 (12:37 +0530)]
networkd: Fix route properties.
We are not able to add multiple properties.
wlp3s0.network:
[Match]
Name=wlp3s0
[Route]
Gateway=10.68.5.26
Metric=10
sudo ./systemd-networkd
Failed to parse file '/usr/lib/systemd/network/wlp3s0.network': File
exists
Could not load configuration files: File exists
This patch fixes it.
Evgeny Vereshchagin [Mon, 25 Apr 2016 00:24:41 +0000 (03:24 +0300)]
tests: add test for coredump handler hanging at shutdown (#3101)
Test for #2691.
Sylvain Plantefève [Sun, 24 Apr 2016 23:56:42 +0000 (01:56 +0200)]
po: Update French translation (#3108)
Piotr Drąg [Sun, 24 Apr 2016 10:31:10 +0000 (12:31 +0200)]
catalog,po: update Polish translation (#3100)
Lennart Poettering [Sat, 23 Apr 2016 01:01:55 +0000 (03:01 +0200)]
machinectl: don't parse command line switches after "shell" verb (#3095)
Fixes: #2420
Evgeny Vereshchagin [Sat, 23 Apr 2016 00:49:47 +0000 (03:49 +0300)]
man: document the default for systemd.timer's Persistent flag (#3099)
Closes #3096
Thomas H. P. Andersen [Sat, 23 Apr 2016 00:49:07 +0000 (02:49 +0200)]
tree-wide: remove unused variables (#3098)
Zbigniew Jędrzejewski-Szmek [Fri, 22 Apr 2016 18:04:38 +0000 (14:04 -0400)]
Merge pull request #3094 from poettering/run-slice
systemd-run: fix --slice= in conjunction with --scope
Klearchos Chaloulos [Fri, 22 Apr 2016 18:04:17 +0000 (21:04 +0300)]
journal-remote : Ensure reallocation of source->buf does not result in source->size < source->filled (#3086)
While the function journal-remote-parse.c:get_line() enforces an assertion that source->filled <= source->size, in function journal-remote-parse.c:process_source() there is a chance that source->size will be decreased to a lower value than source->filled, when source->buf is reallocated. Therefore a check is added that ensures that source->buf is reallocated only when source->filled is smaller than target / 2.
Zbigniew Jędrzejewski-Szmek [Fri, 22 Apr 2016 18:03:33 +0000 (14:03 -0400)]
Merge pull request #3078 from poettering/get-processes
A variety of fixes and additions
Lennart Poettering [Fri, 22 Apr 2016 15:31:40 +0000 (17:31 +0200)]
run: make --slice= work in conjunction with --scope
Fixes: #2991
Lennart Poettering [Fri, 22 Apr 2016 15:30:08 +0000 (17:30 +0200)]
core: don't dispatch load queue when setting Slice= for transient units
Let's be more careful when setting up the Slice= property of transient units:
let's use manager_load_unit_prepare() instead of manager_load_unit(), so that
the load queue isn't dispatched right away, because our own transient unit is
in it, and we don#t want to have it loaded until we finished initializing it.
Lennart Poettering [Fri, 22 Apr 2016 15:14:30 +0000 (17:14 +0200)]
machinectl: fix misplaced newline in --help output
Lennart Poettering [Wed, 20 Apr 2016 13:27:27 +0000 (15:27 +0200)]
update TODO
Lennart Poettering [Wed, 20 Apr 2016 18:52:28 +0000 (20:52 +0200)]
man: don't claim systemd would connect stdout/stderr of daemons with /dev/null
Lennart Poettering [Wed, 20 Apr 2016 18:12:14 +0000 (20:12 +0200)]
units: order systemd-user-sessions.service after network.target
That way we can be sure that local users are logged out before the network is
shut down when the system goes down, so that SSH session should be ending
cleanly before the system goes down.
Fixes: #2390
Lennart Poettering [Wed, 20 Apr 2016 18:09:57 +0000 (20:09 +0200)]
journalctl: add --no-hostname switch
This suppresses output of the hostname for messages from the local system.
Fixes: #2342
Lennart Poettering [Wed, 20 Apr 2016 17:46:37 +0000 (19:46 +0200)]
journalctl: add output mode where time is shown in seconds since 1st Jan 1970 UTC
aka "UNIX time".
Fixes: #2120
Lennart Poettering [Wed, 20 Apr 2016 17:37:46 +0000 (19:37 +0200)]
shared: move output_mode_to_string() into output-mode.c
After all, the enum definition is in output-mode.h
Lennart Poettering [Wed, 20 Apr 2016 17:27:32 +0000 (19:27 +0200)]
coredump,basic: generalize O_TMPFILE handling a bit
This moves the O_TMPFILE handling from the coredumping code into common library
code, and generalizes it as open_tmpfile_linkable() + link_tmpfile(). The
existing open_tmpfile() function (which creates an unlinked temporary file that
cannot be linked into the fs) is renamed to open_tmpfile_unlinkable(), to make
the distinction clear. Thus, code may now choose between:
a) open_tmpfile_linkable() + link_tmpfile()
b) open_tmpfile_unlinkable()
Depending on whether they want a file that may be linked back into the fs later
on or not.
In a later commit we should probably convert fopen_temporary() to make use of
open_tmpfile_linkable().
Followup for: #3065
Lennart Poettering [Wed, 20 Apr 2016 16:28:32 +0000 (18:28 +0200)]
systemctl: add two minor assert()s
Lennart Poettering [Wed, 20 Apr 2016 16:20:51 +0000 (18:20 +0200)]
path-lookup: optimize a common strv copy operation away
Follow-up for:
https://github.com/systemd/systemd/pull/3033#discussion_r59689398
Lennart Poettering [Wed, 20 Apr 2016 16:12:57 +0000 (18:12 +0200)]
tree-wide: don't assume CLOCK_BOOTIME is generally available
Before we invoke now(CLOCK_BOOTTIME), let's make sure we actually have that
clock, since now() will otherwise hit an assert.
Specifically, let's refuse CLOCK_BOOTTIME early in sd-event if the kernel
doesn't actually support it.
This is a follow-up for #3037, and specifically:
https://github.com/systemd/systemd/pull/3037#issuecomment-
210199167
Lennart Poettering [Wed, 20 Apr 2016 15:49:31 +0000 (17:49 +0200)]
machine-id-setup: explicitly fsync() the machine ID after writing
As discussed here:
https://github.com/systemd/systemd/issues/2619#issuecomment-
184670042
Explicitly syncing /etc/machine-id after writing it, is probably a good idea,
since it has a strong "commit" character and is generally a one-time thing.
Fixes #2619.
Lennart Poettering [Wed, 20 Apr 2016 15:43:13 +0000 (17:43 +0200)]
shared: move unit-specific code from bus-util.h to bus-unit-util.h
Previously we'd have generally useful sd-bus utilities in bust-util.h,
intermixed with code that is specifically for writing clients for PID 1,
wrapping job and unit handling. Let's split the latter out and move it into
bus-unit-util.c, to make the sources a bit short and easier to grok.
Lennart Poettering [Wed, 20 Apr 2016 14:06:58 +0000 (16:06 +0200)]
shared: drop kernel_thread bool from cgroups show code
Make this an output flag instead, so that our function prototypes can lose one
parameter
Lennart Poettering [Wed, 20 Apr 2016 13:51:33 +0000 (15:51 +0200)]
loginctl,machinectl: also make use of new GetProcesses() bus call
This ports over machinectl and loginctl to also use the new GetProcesses() bus
call to show the process tree of a container or login session. This is similar
to how systemctl already has been ported over in a previous commit.
Lennart Poettering [Wed, 20 Apr 2016 13:32:24 +0000 (15:32 +0200)]
networkd: consider various IPv6 features as disabled if IPv6 is not available in the kernel