rapidio: devices: fix missing put_device in mport_cdev_open

[ Upstream commit d5b6e6eba3af11cb2a2791fa36a2524990fcde1a ]

When kfifo_alloc fails, the refcount of chdev->dev is left incremental.
We should use put_device(&chdev->dev) to decrease the ref count of
chdev->dev to avoid refcount leak.

Link: https://lkml.kernel.org/r/20221203085721.13146-1-caixinchen1@huawei.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Wang Weiyang <wangweiyang2@huawei.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs: Fix OOB Write in hfs_asc2mac

[ Upstream commit c53ed55cb275344086e32a7080a6b19cb183650b ]

Syzbot reported a OOB Write bug:

loop0: detected capacity change from 0 to 64
==================================================================
BUG: KASAN: slab-out-of-bounds in hfs_asc2mac+0x467/0x9a0
fs/hfs/trans.c:133
Write of size 1 at addr ffff88801848314e by task syz-executor391/3632

Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
 print_address_description+0x74/0x340 mm/kasan/report.c:284
 print_report+0x107/0x1f0 mm/kasan/report.c:395
 kasan_report+0xcd/0x100 mm/kasan/report.c:495
 hfs_asc2mac+0x467/0x9a0 fs/hfs/trans.c:133
 hfs_cat_build_key+0x92/0x170 fs/hfs/catalog.c:28
 hfs_lookup+0x1ab/0x2c0 fs/hfs/dir.c:31
 lookup_open fs/namei.c:3391 [inline]
 open_last_lookups fs/namei.c:3481 [inline]
 path_openat+0x10e6/0x2df0 fs/namei.c:3710
 do_filp_open+0x264/0x4f0 fs/namei.c:3740

If in->len is much larger than HFS_NAMELEN(31) which is the maximum
length of an HFS filename, a OOB write could occur in hfs_asc2mac(). In
that case, when the dst reaches the boundary, the srclen is still
greater than 0, which causes a OOB write.
Fix this by adding a check on dstlen in while() before writing to dst
address.

Link: https://lkml.kernel.org/r/20221202030038.1391945-1-zhangpeng362@huawei.com
Fixes: 328b92278650 ("[PATCH] hfs: NLS support")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reported-by: <syzbot+dc3b1cf9111ab5fe98e7@syzkaller.appspotmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

relay: fix type mismatch when allocating memory in relay_create_buf()

[ Upstream commit 4d8586e04602fe42f0a782d2005956f8b6302678 ]

The 'padding' field of the 'rchan_buf' structure is an array of 'size_t'
elements, but the memory is allocated for an array of 'size_t *' elements.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link: https://lkml.kernel.org/r/20221129092002.3538384-1-Ilia.Gavrilov@infotecs.ru
Fixes: b86ff981a825 ("[PATCH] relay: migrate from relayfs to a generic relay API")
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: wuchi <wuchi.zero@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD

[ Upstream commit fd4e60bf0ef8eb9edcfa12dda39e8b6ee9060492 ]

Commit ee62c6b2dc93 ("eventfd: change int to __u64 in eventfd_signal()")
forgot to change int to __u64 in the CONFIG_EVENTFD=n stub function.

Link: https://lkml.kernel.org/r/20221124140154.104680-1-zhangqilong3@huawei.com
Fixes: ee62c6b2dc93 ("eventfd: change int to __u64 in eventfd_signal()")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sha Zhengju <handai.szj@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rapidio: fix possible UAF when kfifo_alloc() fails

[ Upstream commit 02d7d89f816951e0862147d751b1150d67aaebdd ]

If kfifo_alloc() fails in mport_cdev_open(), goto err_fifo and just free
priv. But priv is still in the chdev->file_list, then list traversal
may cause UAF. This fixes the following smatch warning:

drivers/rapidio/devices/rio_mport_cdev.c:1930 mport_cdev_open() warn: '&priv->list' not removed from list

Link: https://lkml.kernel.org/r/20221123095147.52408-1-wangweiyang2@huawei.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: sysv: Fix sysv_nblocks() returns wrong value

[ Upstream commit e0c49bd2b4d3cd1751491eb2d940bce968ac65e9 ]

sysv_nblocks() returns 'blocks' rather than 'res', which only counting
the number of triple-indirect blocks and causing sysv_getattr() gets a
wrong result.

[AV: this is actually a sysv counterpart of minixfs fix -
0fcd426de9d0 "[PATCH] minix block usage counting fix" in
historical tree; mea culpa, should've thought to check
fs/sysv back then...]

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lockd: set other missing fields when unlocking files

[ Upstream commit 18ebd35b61b4693a0ddc270b6d4f18def232e770 ]

vfs_lock_file() expects the struct file_lock to be fully initialised by
the caller. Re-exported NFSv3 has been seen to Oops if the fl_file field
is NULL.

Fixes: aec158242b87 ("lockd: set fl_owner when unlocking files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216582
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: OCTEON: warn only once if deprecated link status is being used

[ Upstream commit 4c587a982603d7e7e751b4925809a1512099a690 ]

Avoid flooding kernel log with warnings.

Fixes: 2c0756d306c2 ("MIPS: OCTEON: warn if deprecated link status is being used")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: BCM63xx: Add check for NULL for clk in clk_enable

[ Upstream commit ee9ef11bd2a59c2fefaa0959e5efcdf040d7c654 ]

Check clk for NULL before calling clk_enable_unlocked where clk
is dereferenced. There is such check in other implementations
of clk_enable.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_scu_ipc: fix possible name leak in __intel_scu_ipc_register()

[ Upstream commit 0b3d0cb7c0bed2fd6454f77ed75e7a662c6efd12 ]

In some error paths before device_register(), the names allocated
by dev_set_name() are not freed. Move dev_set_name() front to
device_register(), so the name can be freed while calling
put_device().

Fixes: 54b34aa0a729 ("platform/x86: intel_scu_ipc: Split out SCU IPC functionality from the SCU driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221208151916.2404977-1-yangyingliang@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()

[ Upstream commit 727cc0147f5066e359aca65cc6cc5e6d64cc15d8 ]

The ACPI buffer memory (out.pointer) returned by wmi_evaluate_method()
is not freed after the call, so it leads to memory leak.

The method results in ACPI buffer is not used, so just pass NULL to
wmi_evaluate_method() which fixes the memory leak.

Fixes: 99b38b4acc0d ("platform/x86: add MXM WMI driver.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221129011101.2042315-1-liaoyu15@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_typec: zero out stale pointers

[ Upstream commit 9a8aadcf0b459c1257b9477fd6402e1d5952ae07 ]

`cros_typec_get_switch_handles` allocates four pointers when obtaining
type-c switch handles. These pointers are all freed if failing to obtain
any of them; therefore, pointers in `port` become stale. The stale
pointers eventually cause use-after-free or double free in later code
paths. Zeroing out all pointer fields after freeing to eliminate these
stale pointers.

Fixes: f28adb41dab4 ("platform/chrome: cros_ec_typec: Register Type C switches")
Fixes: 1a8912caba02 ("platform/chrome: cros_ec_typec: Get retimer handle")
Signed-off-by: Victor Ding <victording@chromium.org>
Acked-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221207093924.v2.1.I1864b6a7ee98824118b93677868d22d3750f439b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_ec_typec: Cleanup switch handle return paths

[ Upstream commit 66fe238a9bcc158f75ddecf976d1ce7efe20f713 ]

Some of the return paths for the cros_typec_get_switch_handles()
aren't necessary. Clean up the return paths to only undo the handle
get's which succeeded.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20220711072333.2064341-9-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9a8aadcf0b45 ("platform/chrome: cros_ec_typec: zero out stale pointers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: runtime: Do not call __rpm_callback() from rpm_idle()

[ Upstream commit bc80c2e438dcbfcf748452ec0f7ad5b79ff3ad88 ]

Calling __rpm_callback() from rpm_idle() after adding device links
support to the former is a clear mistake.

Not only it causes rpm_idle() to carry out unnecessary actions, but it
is also against the assumption regarding the stability of PM-runtime
status across __rpm_callback() invocations, because rpm_suspend() and
rpm_resume() may run in parallel with __rpm_callback() when it is called
by rpm_idle() and the device's PM-runtime status can be updated by any
of them.

Fixes: 21d5c57b3726 ("PM / runtime: Use device links")
Link: https://lore.kernel.org/linux-pm/36aed941-a73e-d937-2721-4f0decd61ce0@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()

[ Upstream commit 8b997b2bb2c53b76a6db6c195930e9ab8e4b0c79 ]

As 'kdata.num' is user-controlled data, if user tries to allocate
memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it
creates a stack trace and messes up dmesg with a warning.

Call trace:
-> privcmd_ioctl
--> privcmd_ioctl_mmap_resource

Add __GFP_NOWARN in order to avoid too large allocation warning.
This is detected by static analysis using smatch.

Fixes: 3ad0876554ca ("xen/privcmd: add IOCTL_PRIVCMD_MMAP_RESOURCE")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221126050745.778967-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/xen: Fix memory leak in xen_init_lock_cpu()

[ Upstream commit ca84ce153d887b1dc8b118029976cc9faf2a9b40 ]

In xen_init_lock_cpu(), the @name has allocated new string by kasprintf(),
if bind_ipi_to_irqhandler() fails, it should be freed, otherwise may lead
to a memory leak issue, fix it.

Fixes: 2d9e1e2f58b5 ("xen: implement Xen-specific spinlocks")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221123155858.11382-3-xiujianfeng@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()

[ Upstream commit 69143f60868b3939ddc89289b29db593b647295e ]

These local variables @{resched|pmu|callfunc...}_name saves the new
string allocated by kasprintf(), and when bind_{v}ipi_to_irqhandler()
fails, it goes to the @fail tag, and calls xen_smp_intr_free{_pv}() to
free resource, however the new string is not saved, which cause a memory
leak issue. fix it.

Fixes: 9702785a747a ("i386: move xen")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221123155858.11382-2-xiujianfeng@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix

[ Upstream commit cefa72129e45313655d53a065b8055aaeb01a0c9 ]

Intel ICC -hotpatch inserts 2-byte "0x66 0x90" NOP at the start of each
function to reserve extra space for hot-patching, and currently it is not
possible to probe these functions because branch_setup_xol_ops() wrongly
rejects NOP with REP prefix as it treats them like word-sized branch
instructions.

Fixes: 250bbd12c2fe ("uprobes/x86: Refuse to attach uprobe to "word-sized" branch insns")
Reported-by: Seiji Nishikawa <snishika@redhat.com>
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20221204173933.GA31544@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()

[ Upstream commit 470188b09e92d83c5a997f25f0e8fb8cd2bc3469 ]

There is an use-after-free reported by KASAN:

  BUG: KASAN: use-after-free in acpi_ut_remove_reference+0x3b/0x82
  Read of size 1 at addr ffff888112afc460 by task modprobe/2111
  CPU: 0 PID: 2111 Comm: modprobe Not tainted 6.1.0-rc7-dirty
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
  Call Trace:
   <TASK>
   kasan_report+0xae/0xe0
   acpi_ut_remove_reference+0x3b/0x82
   acpi_ut_copy_iobject_to_iobject+0x3be/0x3d5
   acpi_ds_store_object_to_local+0x15d/0x3a0
   acpi_ex_store+0x78d/0x7fd
   acpi_ex_opcode_1A_1T_1R+0xbe4/0xf9b
   acpi_ps_parse_aml+0x217/0x8d5
   ...
   </TASK>

The root cause of the problem is that the acpi_operand_object
is freed when acpi_ut_walk_package_tree() fails in
acpi_ut_copy_ipackage_to_ipackage(), lead to repeated release in
acpi_ut_copy_iobject_to_iobject(). The problem was introduced
by "8aa5e56eeb61" commit, this commit is to fix memory leak in
acpi_ut_copy_iobject_to_iobject(), repeatedly adding remove
operation, lead to "acpi_operand_object" used after free.

Fix it by removing acpi_ut_remove_reference() in
acpi_ut_copy_ipackage_to_ipackage(). acpi_ut_copy_ipackage_to_ipackage()
is called to copy an internal package object into another internal
package object, when it fails, the memory of acpi_operand_object
should be freed by the caller.

Fixes: 8aa5e56eeb61 ("ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobject")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/timer-ti-dm: Fix missing clk_disable_unprepare in dmtimer_systimer_init_clock()

[ Upstream commit 180d35a7c05d520314a590c99ad8643d0213f28b ]

If clk_get_rate() fails which is called after clk_prepare_enable(),
clk_disable_unprepare() need be called in error path to disable the
clock in dmtimer_systimer_init_clock().

Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20221029114427.946520-1-yangyingliang@huawei.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpu/hotplug: Do not bail-out in DYING/STARTING sections

[ Upstream commit 6f855b39e4602b6b42a8e5cbcfefb8a1b8b5f0be ]

The DYING/STARTING callbacks are not expected to fail. However, as reported
by Derek, buggy drivers such as tboot are still free to return errors
within those sections, which halts the hot(un)plug and leaves the CPU in an
unrecoverable state.

As there is no rollback possible, only log the failures and proceed with
the following steps.

This restores the hotplug behaviour prior to commit 453e41085183
("cpu/hotplug: Add cpuhp_invoke_callback_range()")

Fixes: 453e41085183 ("cpu/hotplug: Add cpuhp_invoke_callback_range()")
Reported-by: Derek Dolney <z23@posteo.net>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Derek Dolney <z23@posteo.net>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215867
Link: https://lore.kernel.org/r/20220927101259.1149636-1-vdonnefort@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpu/hotplug: Make target_store() a nop when target == state

[ Upstream commit 64ea6e44f85b9b75925ebe1ba0e6e8430cc4e06f ]

Writing the current state back in hotplug/target calls cpu_down()
which will set cpu dying even when it isn't and then nothing will
ever clear it. A stress test that reads values and writes them back
for all cpu device files in sysfs will trigger the BUG() in
select_fallback_rq once all cpus are marked as dying.

kernel/cpu.c::target_store()
...
        if (st->state < target)
                ret = cpu_up(dev->id, target);
        else
                ret = cpu_down(dev->id, target);

cpu_down() -> cpu_set_state()
 bool bringup = st->state < target;
 ...
 if (cpu_dying(cpu) != !bringup)
set_cpu_dying(cpu, !bringup);

Fix this by letting state==target fall through in the target_store()
conditional. Also make sure st->target == target in that case.

Fixes: 757c989b9994 ("cpu/hotplug: Make target state writeable")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/20221117162329.3164999-2-pauld@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

futex: Resend potentially swallowed owner death notification

[ Upstream commit 90d758896787048fa3d4209309d4800f3920e66f ]

Commit ca16d5bee598 ("futex: Prevent robust futex exit race") addressed
two cases when tasks waiting on a robust non-PI futex remained blocked
despite the futex not being owned anymore:

* if the owner died after writing zero to the futex word, but before
  waking up a waiter

* if a task waiting on the futex was woken up, but died before updating
  the futex word (effectively swallowing the notification without acting
  on it)

In the second case, the task could be woken up either by the previous
owner (after the futex word was reset to zero) or by the kernel (after
the OWNER_DIED bit was set and the TID part of the futex word was reset
to zero) if the previous owner died without the resetting the futex.

Because the referenced commit wakes up a potential waiter only if the
whole futex word is zero, the latter subcase remains unaddressed.

Fix this by looking only at the TID part of the futex when deciding
whether a wake up is needed.

Fixes: ca16d5bee598 ("futex: Prevent robust futex exit race")
Signed-off-by: Alexey Izbyshev <izbyshev@ispras.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221111215439.248185-1-izbyshev@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

futex: Move to kernel/futex/

[ Upstream commit 77e52ae35463521041906c510fe580d15663bb93 ]

In preparation for splitup..

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Link: https://lore.kernel.org/r/20210923171111.300673-2-andrealmeid@collabora.com
Stable-dep-of: 90d758896787 ("futex: Resend potentially swallowed owner death notification")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: ralink: mt7621: do not use kzalloc too early

[ Upstream commit 7c18b64bba3bcad1be94b404f47b94a04b91ce79 ]

With CONFIG_SLUB=y, following commit 6edf2576a6cc ("mm/slub: enable
debugging memory wasting of kmalloc") mt7621 failed to boot very early,
without showing any console messages.
This exposed the pre-existing bug of mt7621.c using kzalloc before normal
memory management was available.
Prior to this slub change, there existed the unintended protection against
"kmem_cache *s" being NULL as slab_pre_alloc_hook() happened to
return NULL and bailed out of slab_alloc_node().
This allowed mt7621 prom_soc_init to fail in the soc_dev_init kzalloc,
but continue booting without the SOC_BUS driver device registered.

Console output from a DEBUG_ZBOOT vmlinuz kernel loading,
with mm/slub modified to warn on kmem_cache zero or null:

zimage at:     80B842A0 810B4BC0
Uncompressing Linux at load address 80001000
Copy device tree to address  80B80EE0
Now, booting the kernel...

[    0.000000] Linux version 6.1.0-rc3+ (john@john)
(mipsel-buildroot-linux-gnu-gcc.br_real (Buildroot
2021.11-4428-g6b6741b) 12.2.0, GNU ld (GNU Binutils) 2.39) #73 SMP Wed
     Nov  2 05:10:01 AEST 2022
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at mm/slub.c:3416
kmem_cache_alloc+0x5a4/0x5e8
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.1.0-rc3+ #73
[    0.000000] Stack : 810fff78 80084d98 00000000 00000004 00000000
00000000 80889d04 80c90000
[    0.000000]         80920000 807bd328 8089d368 80923bd3 00000000
00000001 80889cb0 00000000
[    0.000000]         00000000 00000000 807bd328 8084bcb1 00000002
00000002 00000001 6d6f4320
[    0.000000]         00000000 80c97d3d 80c97d68 fffffffc 807bd328
00000000 00000000 00000000
[    0.000000]         00000000 a0000000 80910000 8110a0b4 00000000
00000020 80010000 80010000
[    0.000000]         ...
[    0.000000] Call Trace:
[    0.000000] [<80008260>] show_stack+0x28/0xf0
[    0.000000] [<8070c958>] dump_stack_lvl+0x60/0x80
[    0.000000] [<8002e184>] __warn+0xc4/0xf8
[    0.000000] [<8002e210>] warn_slowpath_fmt+0x58/0xa4
[    0.000000] [<801c0fac>] kmem_cache_alloc+0x5a4/0x5e8
[    0.000000] [<8092856c>] prom_soc_init+0x1fc/0x2b4
[    0.000000] [<80928060>] prom_init+0x44/0xf0
[    0.000000] [<80929214>] setup_arch+0x4c/0x6a8
[    0.000000] [<809257e0>] start_kernel+0x88/0x7c0
[    0.000000]
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled

Allowing soc_device_register to work exposed oops in the mt7621 phy pci,
and pci controller drivers from soc_device_match_attr, due to missing
sentinels in the quirks tables. These were fixed with:
commit 819b885cd886 ("phy: ralink: mt7621-pci: add sentinel to quirks
table")
not yet applied ("PCI: mt7621: add sentinel to quirks table")

Link: https://lore.kernel.org/linux-mm/becf2ac3-2a90-4f3a-96d9-a70f67c66e4a@app.fastmail.com/
Fixes: 71b9b5e0130d ("MIPS: ralink: mt7621: introduce 'soc_device' initialization")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: ralink: mt7621: soc queries and tests as functions

[ Upstream commit b4767d4c072583dec987225b6fe3f5524a735f42 ]

Move the SoC register value queries and tests to specific functions,
to remove repetition of logic
No functional changes intended

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem

[ Upstream commit a2cab953b4c077cc02878d424466d3a6eac32aaf ]

So that MT7621_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Stable-dep-of: 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/sh_cmt: Access registers according to spec

[ Upstream commit 3f44f7156f59cae06e9160eafb5d8b2dfd09e639 ]

Documentation for most CMTs say that it takes two input clocks before
changes propagate to the timer. This is especially relevant when the timer
is stopped to change further settings.

Implement the delays according to the spec. To avoid unnecessary delays in
atomic mode, also check if the to-be-written value actually differs.

CMCNT is a bit special because testing showed that it requires 3 cycles to
propagate, which affects all CMTs. Also, the WRFLAG needs to be checked
before writing. This fixes "cannot clear CMCNT" messages which occur often
on R-Car Gen4 SoCs, but only very rarely on older SoCs for some reason.

Fixes: 81b3b2711072 ("clocksource: sh_cmt: Add support for multiple channels per device")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221130210609.7718-1-wsa+renesas@sang-engineering.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

rapidio: rio: fix possible name leak in rio_register_mport()

[ Upstream commit e92a216d16bde65d21a3227e0fb2aa0794576525 ]

If device_register() returns error, the name allocated by dev_set_name()
need be freed.  It should use put_device() to give up the reference in the
error path, so that the name can be freed in kobject_cleanup(), and
list_del() is called to delete the port from rio_mports.

Link: https://lkml.kernel.org/r/20221114152636.2939035-3-yangyingliang@huawei.com
Fixes: 2aaf308b95b2 ("rapidio: rework device hierarchy and introduce mport class of devices")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rapidio: fix possible name leaks when rio_add_device() fails

[ Upstream commit f9574cd48679926e2a569e1957a5a1bcc8a719ac ]

Patch series "rapidio: fix three possible memory leaks".

This patchset fixes three name leaks in error handling.
 - patch #1 fixes two name leaks while rio_add_device() fails.
 - patch #2 fixes a name leak while  rio_register_mport() fails.

This patch (of 2):

If rio_add_device() returns error, the name allocated by dev_set_name()
need be freed.  It should use put_device() to give up the reference in the
error path, so that the name can be freed in kobject_cleanup(), and the
'rdev' can be freed in rio_release_dev().

Link: https://lkml.kernel.org/r/20221114152636.2939035-1-yangyingliang@huawei.com
Link: https://lkml.kernel.org/r/20221114152636.2939035-2-yangyingliang@huawei.com
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

debugfs: fix error when writing negative value to atomic_t debugfs file

[ Upstream commit d472cf797c4e268613dbce5ec9b95d0bcae19ecb ]

The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), so we have to use a 64-bit value to write a
negative value for a debugfs file created by debugfs_create_atomic_t().

This restores the previous behaviour by introducing
DEFINE_DEBUGFS_ATTRIBUTE_SIGNED for a signed value.

Link: https://lkml.kernel.org/r/20220919172418.45257-4-akinobu.mita@gmail.com
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/notifier-error-inject: fix error when writing -errno to debugfs file

[ Upstream commit f883c3edd2c432a2931ec8773c70a570115a50fe ]

The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()").

This restores the previous behaviour by using newly introduced
DEFINE_SIMPLE_ATTRIBUTE_SIGNED instead of DEFINE_SIMPLE_ATTRIBUTE.

Link: https://lkml.kernel.org/r/20220919172418.45257-3-akinobu.mita@gmail.com
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value

[ Upstream commit 2e41f274f9aa71cdcc69dc1f26a3f9304a651804 ]

Patch series "fix error when writing negative value to simple attribute
files".

The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), but some attribute files want to accept a negative
value.

This patch (of 3):

The simple attribute files do not accept a negative value since the commit
488dac0c9237 ("libfs: fix error cast of negative value in
simple_attr_write()"), so we have to use a 64-bit value to write a
negative value.

This adds DEFINE_SIMPLE_ATTRIBUTE_SIGNED for a signed value.

Link: https://lkml.kernel.org/r/20220919172418.45257-1-akinobu.mita@gmail.com
Link: https://lkml.kernel.org/r/20220919172418.45257-2-akinobu.mita@gmail.com
Fixes: 488dac0c9237 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()

[ Upstream commit 91fda1f88c0968f1491ab150bb01690525af150a ]

pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
after using pci_get_device(). Let's add it.

Fixes: 59a3b3a8db16 ("cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

genirq/irqdesc: Don't try to remove non-existing sysfs files

[ Upstream commit 9049e1ca41983ab773d7ea244bee86d7835ec9f5 ]

Fault injection tests trigger warnings like this:

  kernfs: can not remove 'chip_name', no directory
  WARNING: CPU: 0 PID: 253 at fs/kernfs/dir.c:1616 kernfs_remove_by_name_ns+0xce/0xe0
  RIP: 0010:kernfs_remove_by_name_ns+0xce/0xe0
  Call Trace:
   <TASK>
   remove_files.isra.1+0x3f/0xb0
   sysfs_remove_group+0x68/0xe0
   sysfs_remove_groups+0x41/0x70
   __kobject_del+0x45/0xc0
   kobject_del+0x29/0x40
   free_desc+0x42/0x70
   irq_free_descs+0x5e/0x90

The reason is that the interrupt descriptor sysfs handling does not roll
back on a failing kobject_add() during allocation. If the descriptor is
freed later on, kobject_del() is invoked with a not added kobject resulting
in the above warnings.

A proper rollback in case of a kobject_add() failure would be the straight
forward solution. But this is not possible due to the way how interrupt
descriptor sysfs handling works.

Interrupt descriptors are allocated before sysfs becomes available. So the
sysfs files for the early allocated descriptors are added later in the boot
process. At this point there can be nothing useful done about a failing
kobject_add(). For consistency the interrupt descriptor allocation always
treats kobject_add() failures as non-critical and just emits a warning.

To solve this problem, keep track in the interrupt descriptor whether
kobject_add() was successful or not and make the invocation of
kobject_del() conditional on that.

[ tglx: Massage changelog, comments and use a state bit. ]

Fixes: ecb3f394c5db ("genirq: Expose interrupt information through sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221128151612.1786122-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: don't call nfsd_file_put from client states seqfile display

[ Upstream commit e0aa651068bfd520afcd357af8ecd2de005fc83d ]

We had a report of this:

    BUG: sleeping function called from invalid context at fs/nfsd/filecache.c:440

...with a stack trace showing nfsd_file_put being called from
nfs4_show_open. This code has always tried to call fput while holding a
spinlock, but we recently changed this to use the filecache, and that
started triggering the might_sleep() in nfsd_file_put.

states_start takes and holds the cl_lock while iterating over the
client's states, and we can't sleep with that held.

Have the various nfs4_show_* functions instead hold the fi_lock instead
of taking a nfsd_file reference.

Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2138357
Reported-by: Zhi Li <yieli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSD: Finish converting the NFSv2 GETACL result encoder

[ Upstream commit ea5021e911d3479346a75ac9b7d9dcd751b0fb99 ]

The xdr_stream conversion inadvertently left some code that set the
page_len of the send buffer. The XDR stream encoders should handle
this automatically now.

This oversight adds garbage past the end of the Reply message.
Clients typically ignore the garbage, but NFSD does not need to send
it, as it leaks stale memory contents onto the wire.

Fixes: f8cba47344f7 ("NFSD: Update the NFSv2 GETACL result encoder to use struct xdr_stream")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Return true/false (not 1/0) from bool functions

[ Upstream commit 5f7b839d47dbc74cf4a07beeab5191f93678673e ]

Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions.  This fixes the following warnings from coccicheck:

./fs/nfsd/nfs2acl.c:289:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_accessres' with return type bool
./fs/nfsd/nfs2acl.c:252:9-10: WARNING: return of 0/1 in function
'nfsaclsvc_encode_getaclres' with return type bool

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: ea5021e911d3 ("NFSD: Finish converting the NFSv2 GETACL result encoder")
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()

[ Upstream commit 9c8921555907f4d723f01ed2d859b66f2d14f08e ]

As the comment of pci_get_domain_bus_and_slot() says, it returns
a PCI device with refcount incremented, so it doesn't need to
call an extra pci_dev_get() in pci_get_dev_wrapper(), and the PCI
device needs to be put in the error path.

Fixes: d4dc89d069aa ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20221128065512.3572550-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/wpcm450: Fix memory leak in wpcm450_aic_of_init()

[ Upstream commit 4208d4faf36573a507b5e5de17abe342e9276759 ]

If of_iomap() failed, 'aic' should be freed before return. Otherwise
there is a memory leak.

Fixes: fead4dd49663 ("irqchip: Add driver for WPCM450 interrupt controller")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221115092532.1704032-1-weiyongjun@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()

[ Upstream commit f9ee20c85b3a3ba0afd3672630ec4f93d339f015 ]

gic_probe() calls pm_runtime_get_sync() and added fail path as
rpm_put to put usage_counter. However, pm_runtime_get_sync()
will increment usage_counter even it failed. Fix it by replacing it with
pm_runtime_resume_and_get() to keep usage counter balanced.

Fixes: 9c8edddfc992 ("irqchip/gic: Add platform driver for non-root GICs that require RPM")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221124065150.22809-1-shangxiaojing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal: core: fix some possible name leaks in error paths

[ Upstream commit 4748f9687caaeefab8578285b97b2f30789fc4b4 ]

In some error paths before device_register(), the names allocated
by dev_set_name() are not freed. Move dev_set_name() front to
device_register(), so the name can be freed while calling
put_device().

Fixes: 1dd7128b839f ("thermal/core: Fix null pointer dereference in thermal_release()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/chrome: cros_usbpd_notify: Fix error handling in cros_usbpd_notify_init()

[ Upstream commit 5a2d96623670155d94aca72c320c0ac27bdc6bd2 ]

The following WARNING message was given when rmmod cros_usbpd_notify:

 Unexpected driver unregister!
 WARNING: CPU: 0 PID: 253 at drivers/base/driver.c:270 driver_unregister+0x8a/0xb0
 Modules linked in: cros_usbpd_notify(-)
 CPU: 0 PID: 253 Comm: rmmod Not tainted 6.1.0-rc3 #24
 ...
 Call Trace:
  <TASK>
  cros_usbpd_notify_exit+0x11/0x1e [cros_usbpd_notify]
  __x64_sys_delete_module+0x3c7/0x570
  ? __ia32_sys_delete_module+0x570/0x570
  ? lock_is_held_type+0xe3/0x140
  ? syscall_enter_from_user_mode+0x17/0x50
  ? rcu_read_lock_sched_held+0xa0/0xd0
  ? syscall_enter_from_user_mode+0x1c/0x50
  do_syscall_64+0x37/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
 RIP: 0033:0x7f333fe9b1b7

The reason is that the cros_usbpd_notify_init() does not check the return
value of platform_driver_register(), and the cros_usbpd_notify can
install successfully even if platform_driver_register() failed.

Fix by checking the return value of platform_driver_register() and
unregister cros_usbpd_notify_plat_driver when it failed.

Fixes: ec2daf6e33f9 ("platform: chrome: Add cros-usbpd-notify driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20221117080823.77549-1-yuancan@huawei.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Fix reference count leak in __uncore_imc_init_box()

[ Upstream commit 17b8d847b92d815d1638f0de154654081d66b281 ]

pci_get_device() will increase the reference count for the returned
pci_dev, so tgl_uncore_get_mc_dev() will return a pci_dev with its
reference count increased. We need to call pci_dev_put() to decrease the
reference count before exiting from __uncore_imc_init_box(). Add
pci_dev_put() for both normal and error path.

Fixes: fdb64822443e ("perf/x86: Add Intel Tiger Lake uncore support")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-5-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()

[ Upstream commit 8ebd16c11c346751b3944d708e6c181ed4746c39 ]

pci_get_device() will increase the reference count for the returned
pci_dev, so snr_uncore_get_mc_dev() will return a pci_dev with its
reference count increased. We need to call pci_dev_put() to decrease the
reference count. Let's add the missing pci_dev_put().

Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-4-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()

[ Upstream commit 1ff9dd6e7071a561f803135c1d684b13c7a7d01d ]

pci_get_device() will increase the reference count for the returned
'dev'. We need to call pci_dev_put() to decrease the reference count.
Since 'dev' is only used in pci_read_config_dword(), let's add
pci_dev_put() right after it.

Fixes: 9d480158ee86 ("perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-3-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Fix reference count leak in sad_cfg_iio_topology()

[ Upstream commit c508eb042d9739bf9473526f53303721b70e9100 ]

pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.

If we break the loop in sad_cfg_iio_topology() with 'dev' not NULL. We
need to call pci_dev_put() to decrease the reference count. Since
pci_dev_put() can handle the NULL input parameter, we can just add one
pci_dev_put() right before 'return ret'.

Fixes: c1777be3646b ("perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20221118063137.121512-2-wangxiongfeng2@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PNP: fix name memory leak in pnp_alloc_dev()

[ Upstream commit 110d7b0325c55ff3620073ba4201845f59e22ebf ]

After commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
move dev_set_name() after pnp_add_id() to avoid memory leak.

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/efivarfs: Add checking of the test return value

[ Upstream commit c93924267fe6f2b44af1849f714ae9cd8117a9cd ]

Add checking of the test return value, otherwise it will report success
forever for test_create_read().

Fixes: dff6d2ae56d0 ("selftests/efivarfs: clean up test files from test_create*()")
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: vpe-cmp: fix possible memory leak while module exiting

[ Upstream commit c5ed1fe0801f0c66b0fbce2785239a5664629057 ]

dev_set_name() allocates memory for name, it need be freed
when module exiting, call put_device() to give up reference,
so that it can be freed in kobject_cleanup() when the refcount
hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release().

Fixes: 17a1d523aa58 ("MIPS: APRP: Add VPE loader support for CMP platforms.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: vpe-mt: fix possible memory leak while module exiting

[ Upstream commit 5822e8cc84ee37338ab0bdc3124f6eec04dc232d ]

Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
it need be freed when module exiting, call put_device() to give up
reference, so that it can be freed in kobject_cleanup() when the
refcount hit to 0. The vpe_device is static, so remove kfree() from
vpe_device_release().

Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ocfs2: fix memory leak in ocfs2_stack_glue_init()

[ Upstream commit 13b6269dd022aaa69ca8d1df374ab327504121cf ]

ocfs2_table_header should be free in ocfs2_stack_glue_init() if
ocfs2_sysfs_init() failed, otherwise kmemleak will report memleak.

BUG: memory leak
unreferenced object 0xffff88810eeb5800 (size 128):
  comm "modprobe", pid 4507, jiffies 4296182506 (age 55.888s)
  hex dump (first 32 bytes):
    c0 40 14 a0 ff ff ff ff 00 00 00 00 01 00 00 00  .@..............
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000001e59e1cd>] __register_sysctl_table+0xca/0xef0
    [<00000000c04f70f7>] 0xffffffffa0050037
    [<000000001bd12912>] do_one_initcall+0xdb/0x480
    [<0000000064f766c9>] do_init_module+0x1cf/0x680
    [<000000002ba52db0>] load_module+0x6441/0x6f20
    [<000000009772580d>] __do_sys_finit_module+0x12f/0x1c0
    [<00000000380c1f22>] do_syscall_64+0x3f/0x90
    [<000000004cf473bc>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Link: https://lkml.kernel.org/r/41651ca1-432a-db34-eb97-d35744559de1@linux.alibaba.com
Fixes: 3878f110f71a ("ocfs2: Move the hb_ctl_path sysctl into the stack glue.")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/fonts: fix undefined behavior in bit shift for get_default_font

[ Upstream commit 6fe888c4d2fb174408e4540bb2d5602b9f507f90 ]

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned.  The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in lib/fonts/fonts.c:139:20
left shift of 1 by 31 places cannot be represented in type 'int'
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 get_default_font+0x1c7/0x1f0
 fbcon_startup+0x347/0x3a0
 do_take_over_console+0xce/0x270
 do_fbcon_takeover+0xa1/0x170
 do_fb_registered+0x2a8/0x340
 fbcon_fb_registered+0x47/0xe0
 register_framebuffer+0x294/0x4a0
 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
 drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
 drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
 drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
 bochs_pci_probe+0x6ca/0x772 [bochs]
 local_pci_probe+0x4d/0xb0
 pci_device_probe+0x119/0x320
 really_probe+0x181/0x550
 __driver_probe_device+0xc6/0x220
 driver_probe_device+0x32/0x100
 __driver_attach+0x195/0x200
 bus_for_each_dev+0xbb/0x120
 driver_attach+0x27/0x30
 bus_add_driver+0x22e/0x2f0
 driver_register+0xa9/0x190
 __pci_register_driver+0x90/0xa0
 bochs_pci_driver_init+0x52/0x1000 [bochs]
 do_one_initcall+0x76/0x430
 do_init_module+0x61/0x28a
 load_module+0x1f82/0x2e50
 __do_sys_finit_module+0xf8/0x190
 __x64_sys_finit_module+0x23/0x30
 do_syscall_64+0x58/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
 </TASK>

Link: https://lkml.kernel.org/r/20221031113829.4183153-1-cuigaosheng1@huawei.com
Fixes: c81f717cb9e0 ("fbcon: Fix typo and bogus logic in get_default_font")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

proc: fixup uptime selftest

[ Upstream commit 5cc81d5c81af0dee54da9a67a3ebe4be076a13db ]

syscall(3) returns -1 and sets errno on error, unlike "syscall"
instruction.

Systems which have <= 32/64 CPUs are unaffected. Test won't bounce
to all CPUs before completing if there are more of them.

Link: https://lkml.kernel.org/r/Y1bUiT7VRXlXPQa1@p183
Fixes: 1f5bd0547654 ("proc: selftests: test /proc/uptime")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

timerqueue: Use rb_entry_safe() in timerqueue_getnext()

[ Upstream commit 2f117484329b233455ee278f2d9b0a4356835060 ]

When `timerqueue_getnext()` is called on an empty timer queue, it will
use `rb_entry()` on a NULL pointer, which is invalid. Fix that by using
`rb_entry_safe()` which handles NULL pointers.

This has not caused any issues so far because the offset of the `rb_node`
member in `timerqueue_node` is 0, so `rb_entry()` is essentially a no-op.

Fixes: 511885d7061e ("lib/timerqueue: Rely on rbtree semantics for next timer")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221114195421.342929-1-pobrn@protonmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: huawei-wmi: fix return value calculation

[ Upstream commit 0b9a1dcdb6a2c841899389bf2dd7a3e0e2aa0e99 ]

Previously, `huawei_wmi_input_setup()` returned the result of
logical or-ing the return values of two functions that return negative
errno-style error codes and one that returns `acpi_status`. If this
returned value was non-zero, then it was propagated from the platform
driver's probe function. That function should return a negative
errno-style error code, so the result of the logical or that
`huawei_wmi_input_setup()` returned was not appropriate.

Fix that by checking each function separately and returning the
error code unmodified.

Fixes: 1ac9abeb2e5b ("platform/x86: huawei-wmi: Move to platform driver")
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20221005150032.173198-2-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/debugobjects: fix stat count and optimize debug_objects_mem_init

[ Upstream commit eabb7f1ace53e127309407b2b5e74e8199e85270 ]

1. Var debug_objects_allocated tracks valid kmem_cache_alloc calls, so
   track it in debug_objects_replace_static_objects.  Do similar things in
   object_cpu_offline.

2. In debug_objects_mem_init, there is no need to call function
   cpuhp_setup_state_nocalls when debug_objects_enabled = 0 (out of
   memory).

Link: https://lkml.kernel.org/r/20220611130634.99741-1-wuchi.zero@gmail.com
Fixes: 634d61f45d6f ("debugobjects: Percpu pool lookahead freeing/allocation")
Fixes: c4b73aabd098 ("debugobjects: Track number of kmem_cache_alloc/kmem_cache_free done")
Signed-off-by: wuchi <wuchi.zero@gmail.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf: Fix possible memleak in pmu_dev_alloc()

[ Upstream commit e8d7a90c08ce963c592fb49845f2ccc606a2ac21 ]

In pmu_dev_alloc(), when dev_set_name() failed, it will goto free_dev
and call put_device(pmu->dev) to release it.
However pmu->dev->release is assigned after this, which makes warning
and memleak.
Call dev_set_name() after pmu->dev->release = pmu_dev_release to fix it.

  Device '(null)' does not have a release() function...
  WARNING: CPU: 2 PID: 441 at drivers/base/core.c:2332 device_release+0x1b9/0x240
  ...
  Call Trace:
    <TASK>
    kobject_put+0x17f/0x460
    put_device+0x20/0x30
    pmu_dev_alloc+0x152/0x400
    perf_pmu_register+0x96b/0xee0
    ...
  kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
  unreferenced object 0xffff888014759000 (size 2048):
    comm "modprobe", pid 441, jiffies 4294931444 (age 38.332s)
    backtrace:
      [<0000000005aed3b4>] kmalloc_trace+0x27/0x110
      [<000000006b38f9b8>] pmu_dev_alloc+0x50/0x400
      [<00000000735f17be>] perf_pmu_register+0x96b/0xee0
      [<00000000e38477f1>] 0xffffffffc0ad8603
      [<000000004e162216>] do_one_initcall+0xd0/0x4e0
      ...

Fixes: abe43400579d ("perf: Sysfs enumeration")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20221111103653.91058-1-chenzhongjin@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/ftrace: event_triggers: wait longer for test_event_enable

[ Upstream commit a1d6cd88c8973cfb08ee85722488b1d6d5d16327 ]

In some platform, the schedule event may came slowly, delay 100ms can't
cover it.

I was notice that on my board which running in low cpu_freq,and this
selftests allways gose fail.

So maybe we can check more times here to wait longer.

Fixes: 43bb45da82f9 ("selftests: ftrace: Add a selftest to test event enable/disable func trigger")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()

[ Upstream commit 9901c21bcaf2f01fe5078f750d624f4ddfa8f81b ]

If "cpu_dev" fails to get opp table in qcom_cpufreq_hw_read_lut(),
the program will return, resulting in "table" resource is not released.

Fixes: 51c843cf77bb ("cpufreq: qcom: Update the bandwidth levels on frequency change")
Signed-off-by: Chen Hui <judy.chenhui@huawei.com>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: don't audit the capability check in simple_xattr_list()

[ Upstream commit e7eda157c4071cd1e69f4b1687b0fbe1ae5e6f46 ]

The check being unconditional may lead to unwanted denials reported by
LSMs when a process has the capability granted by DAC, but denied by an
LSM. In the case of SELinux such denials are a problem, since they can't
be effectively filtered out via the policy and when not silenced, they
produce noise that may hide a true problem or an attack.

Checking for the capability only if any trusted xattr is actually
present wouldn't really address the issue, since calling listxattr(2) on
such node on its own doesn't indicate an explicit attempt to see the
trusted xattrs. Additionally, it could potentially leak the presence of
trusted xattrs to an unprivileged user if they can check for the denials
(e.g. through dmesg).

Therefore, it's best (and simplest) to keep the check unconditional and
instead use ns_capable_noaudit() that will silence any associated LSM
denials.

Fixes: 38f38657444d ("xattr: extract simple_xattr code from tmpfs")
Reported-by: Martin Pitt <mpitt@redhat.com>
Suggested-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: hibernate: Fix mistake in kerneldoc comment

[ Upstream commit 6e5d7300cbe7c3541bc31f16db3e9266e6027b4b ]

The actual maximum image size formula in hibernate_preallocate_memory()
is as follows:

max_size = (count - (size + PAGES_FOR_IO)) / 2
    - 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);

but the one in the kerneldoc comment of the function is different and
incorrect.

Fixes: ddeb64870810 ("PM / Hibernate: Add sysfs knob to control size of memory for drivers")
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/sgx: Reduce delay and interference of enclave release

[ Upstream commit 7b72c823ddf8aaaec4e9fb28e6fbe4d511e7dad1 ]

commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") introduced a cond_resched() during enclave
release where the EREMOVE instruction is applied to every 4k enclave
page. Giving other tasks an opportunity to run while tearing down a
large enclave placates the soft lockup detector but Iqbal found
that the fix causes a 25% performance degradation of a workload
run using Gramine.

Gramine maintains a 1:1 mapping between processes and SGX enclaves.
That means if a workload in an enclave creates a subprocess then
Gramine creates a duplicate enclave for that subprocess to run in.
The consequence is that the release of the enclave used to run
the subprocess can impact the performance of the workload that is
run in the original enclave, especially in large enclaves when
SGX2 is not in use.

The workload run by Iqbal behaves as follows:
Create enclave (enclave "A")
/* Initialize workload in enclave "A" */
Create enclave (enclave "B")
/* Run subprocess in enclave "B" and send result to enclave "A" */
Release enclave (enclave "B")
/* Run workload in enclave "A" */
Release enclave (enclave "A")

The performance impact of releasing enclave "B" in the above scenario
is amplified when there is a lot of SGX memory and the enclave size
matches the SGX memory. When there is 128GB SGX memory and an enclave
size of 128GB, from the time enclave "B" starts the 128GB SGX memory
is oversubscribed with a combined demand for 256GB from the two
enclaves.

Before commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") enclave release was done in a tight loop
without giving other tasks a chance to run. Even though the system
experienced soft lockups the workload (run in enclave "A") obtained
good performance numbers because when the workload started running
there was no interference.

Commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves") gave other tasks opportunity to run while an
enclave is released. The impact of this in this scenario is that while
enclave "B" is released and needing to access each page that belongs
to it in order to run the SGX EREMOVE instruction on it, enclave "A"
is attempting to run the workload needing to access the enclave
pages that belong to it. This causes a lot of swapping due to the
demand for the oversubscribed SGX memory. Longer latencies are
experienced by the workload in enclave "A" while enclave "B" is
released.

Improve the performance of enclave release while still avoiding the
soft lockup detector with two enhancements:
- Only call cond_resched() after XA_CHECK_SCHED iterations.
- Use the xarray advanced API to keep the xarray locked for
  XA_CHECK_SCHED iterations instead of locking and unlocking
  at every iteration.

This batching solution is copied from sgx_encl_may_map() that
also iterates through all enclave pages using this technique.

With this enhancement the workload experiences a 5%
performance degradation when compared to a kernel without
commit 8795359e35bc ("x86/sgx: Silence softlockup detection when
releasing large enclaves"), an improvement to the reported 25%
degradation, while still placating the soft lockup detector.

Scenarios with poor performance are still possible even with these
enhancements. For example, short workloads creating sub processes
while running in large enclaves. Further performance improvements
are pursued in user space through avoiding to create duplicate enclaves
for certain sub processes, and using SGX2 that will do lazy allocation
of pages as needed so enclaves created for sub processes start quickly
and release quickly.

Fixes: 8795359e35bc ("x86/sgx: Silence softlockup detection when releasing large enclaves")
Reported-by: Md Iqbal Hossain <md.iqbal.hossain@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Md Iqbal Hossain <md.iqbal.hossain@intel.com>
Link: https://lore.kernel.org/all/00efa80dd9e35dc85753e1c5edb0344ac07bb1f0.1667236485.git.reinette.chatre%40intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha: fix syscall entry in !AUDUT_SYSCALL case

[ Upstream commit f7b2431a6d22f7a91c567708e071dfcd6d66db14 ]

We only want to take the slow path if SYSCALL_TRACE or SYSCALL_AUDIT is
set; on !AUDIT_SYSCALL configs the current tree hits it whenever _any_
thread flag (including NEED_RESCHED, NOTIFY_SIGNAL, etc.) happens to
be set.

Fixes: a9302e843944 "alpha: Enable system-call auditing support"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha: fix TIF_NOTIFY_SIGNAL handling

[ Upstream commit e2c7554cc6d85f95e3c6635f270ec839ab9fe05e ]

it needs to be added to _TIF_WORK_MASK, or we might not reach
do_work_pending() in the first place...

Fixes: 5a9a8897c253a "alpha: add support for TIF_NOTIFY_SIGNAL"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpuidle: dt: Return the correct numbers of parsed idle states

[ Upstream commit ee3c2c8ad6ba6785f14a60e4081d7c82e88162a2 ]

While we correctly skips to initialize an idle state from a disabled idle
state node in DT, the returned value from dt_init_idle_driver() don't get
adjusted accordingly. Instead the number of found idle state nodes are
returned, while the callers are expecting the number of successfully
initialized idle states from DT.

This leads to cpuidle drivers unnecessarily continues to initialize their
idle state specific data. Moreover, in the case when all idle states have
been disabled in DT, we would end up registering a cpuidle driver, rather
than relying on the default arch specific idle call.

Fixes: 9f14da345599 ("drivers: cpuidle: implement DT based idle states infrastructure")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()

[ Upstream commit a2e7f03ed28fce26c78b985f87913b6ce3accf9d ]

Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.

s/asym_fits_capacity/asym_fits_cpu/ to better reflect what it does now.

Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-6-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Introduce sched_asym_cpucap_active()

[ Upstream commit 740cf8a760b73e8375bfb4bedcbe9746183350f9 ]

Create an inline helper for conditional code to be only executed on
asymmetric CPU capacity systems. This makes these (currently ~10 and
future) conditions a lot more readable.

Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20220729111305.1275158-2-dietmar.eggemann@arm.com
Stable-dep-of: a2e7f03ed28f ("sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Removed useless update of p->recent_used_cpu

[ Upstream commit a7ba894821b6ade7bb420455f87020b2838d6180 ]

Since commit 89aafd67f28c ("sched/fair: Use prev instead of new target as recent_used_cpu"),
p->recent_used_cpu is unconditionnaly set with prev.

Fixes: 89aafd67f28c ("sched/fair: Use prev instead of new target as recent_used_cpu")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210928103544.27489-1-vincent.guittot@linaro.org
Stable-dep-of: a2e7f03ed28f ("sched/uclamp: Make asym_fits_capacity() use util_fits_cpu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Make select_idle_capacity() use util_fits_cpu()

[ Upstream commit b759caa1d9f667b94727b2ad12589cbc4ce13a82 ]

Use the new util_fits_cpu() to ensure migration margin and capacity
pressure are taken into account correctly when uclamp is being used
otherwise we will fail to consider CPUs as fitting in scenarios where
they should.

Fixes: b4c9c9f15649 ("sched/fair: Prefer prev cpu in asymmetric wakeup path")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-5-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Make task_fits_capacity() use util_fits_cpu()

[ Upstream commit b48e16a69792b5dc4a09d6807369d11b2970cc36 ]

So that the new uclamp rules in regard to migration margin and capacity
pressure are taken into account correctly.

Fixes: a7008c07a568 ("sched/fair: Make task_fits_capacity() consider uclamp restrictions")
Co-developed-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-3-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/uclamp: Fix relationship between uclamp and migration margin

[ Upstream commit 48d5e9daa8b767e75ed9421665b037a49ce4bc04 ]

fits_capacity() verifies that a util is within 20% margin of the
capacity of a CPU, which is an attempt to speed up upmigration.

But when uclamp is used, this 20% margin is problematic because for
example if a task is boosted to 1024, then it will not fit on any CPU
according to fits_capacity() logic.

Or if a task is boosted to capacity_orig_of(medium_cpu). The task will
end up on big instead on the desired medium CPU.

Similar corner cases exist for uclamp and usage of capacity_of().
Slightest irq pressure on biggest CPU for example will make a 1024
boosted task look like it can't fit.

What we really want is for uclamp comparisons to ignore the migration
margin and capacity pressure, yet retain them for when checking the
_actual_ util signal.

For example, task p:

p->util_avg = 300
p->uclamp[UCLAMP_MIN] = 1024

Will fit a big CPU. But

p->util_avg = 900
p->uclamp[UCLAMP_MIN] = 1024

will not, this should trigger overutilized state because the big CPU is
now *actually* being saturated.

Similar reasoning applies to capping tasks with UCLAMP_MAX. For example:

p->util_avg = 1024
p->uclamp[UCLAMP_MAX] = capacity_orig_of(medium_cpu)

Should fit the task on medium cpus without triggering overutilized
state.

Inlined comments expand more on desired behavior in more scenarios.

Introduce new util_fits_cpu() function which encapsulates the new logic.
The new function is not used anywhere yet, but will be used to update
various users of fits_capacity() in later patches.

Fixes: af24bde8df202 ("sched/uclamp: Add uclamp support to energy_compute()")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220804143609.515789-2-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Cleanup task_util and capacity type

[ Upstream commit ef8df9798d469b7c45c66664550e93469749f1e8 ]

task_util and capacity are comparable unsigned long values. There is no
need for an intermidiate implicit signed cast.

Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211207095755.859972-1-vincent.donnefort@arm.com
Stable-dep-of: 48d5e9daa8b7 ("sched/uclamp: Fix relationship between uclamp and migration margin")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: remove privs in ovl_fallocate()

[ Upstream commit 23a8ce16419a3066829ad4a8b7032a75817af65b ]

Underlying fs doesn't remove privs because fallocate is called with
privileged mounter credentials.

This fixes some failure in fstests generic/683..687.

Fixes: aab8848cee5e ("ovl: add ovl_fallocate()")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: remove privs in ovl_copyfile()

[ Upstream commit b306e90ffabdaa7e3b3350dbcd19b7663e71ab17 ]

Underlying fs doesn't remove privs because copy_range/remap_range are
called with privileged mounter credentials.

This fixes some failures in fstest generic/673.

Fixes: 8ede205541ff ("ovl: add reflink/copyfile/dedup support")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: use ovl_copy_{real,upper}attr() wrappers

[ Upstream commit 2878dffc7db0b5a51e308ccb6b571296b57c82e7 ]

When copying inode attributes from the upper or lower layer to ovl inodes
we need to take the upper or lower layer's mount's idmapping into
account. In a lot of places we call ovl_copyattr() only on upper inodes and
in some we call it on either upper or lower inodes. Split this into two
separate helpers.

The first one should only be called on upper
inodes and is thus called ovl_copy_upperattr(). The second one can be
called on upper or lower inodes. We add ovl_copy_realattr() for this
task. The new helper makes use of the previously added ovl_i_path_real()
helper. This is needed to support idmapped base layers with overlay.

When overlay copies the inode information from an upper or lower layer
to the relevant overlay inode it will apply the idmapping of the upper
or lower layer when doing so. The ovl inode ownership will thus always
correctly reflect the ownership of the idmapped upper or lower layer.

All idmapping helpers are nops when no idmapped base layers are used.

Cc: <linux-unionfs@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: b306e90ffabd ("ovl: remove privs in ovl_copyfile()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ovl: store lower path in ovl_inode

[ Upstream commit ffa5723c6d259b3191f851a50a98d0352b345b39 ]

Create some ovl_i_* helpers to get real path from ovl inode. Instead of
just stashing struct inode for the lower layer we stash struct path for
the lower layer. The helpers allow to retrieve a struct path for the
relevant upper or lower layer. This will be used when retrieving
information based on struct inode when copying up inode attributes from
upper or lower inodes to ovl inodes and when checking permissions in
ovl_permission() in following patches. This is needed to support
idmapped base layers with overlay.

Cc: <linux-unionfs@vger.kernel.org>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: b306e90ffabd ("ovl: remove privs in ovl_copyfile()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm/tpm_crb: Fix error message in __crb_relinquish_locality()

[ Upstream commit f5264068071964b56dc02c9dab3d11574aaca6ff ]

The error message in __crb_relinquish_locality() mentions requestAccess
instead of Relinquish. Fix it.

Fixes: 888d867df441 ("tpm: cmd_ready command can be issued only after granting locality")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tpm/tpm_ftpm_tee: Fix error handling in ftpm_mod_init()

[ Upstream commit 2b7d07f7acaac2c7750e420dcf4414588ede6d03 ]

The ftpm_mod_init() returns the driver_register() directly without checking
its return value, if driver_register() failed, the ftpm_tee_plat_driver is
not unregistered.

Fix by unregister ftpm_tee_plat_driver when driver_register() failed.

Fixes: 9f1944c23c8c ("tpm_ftpm_tee: register driver on TEE bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP

[ Upstream commit e6b842741b4f39007215fd7e545cb55aa3d358a2 ]

An oops can be induced by running 'cat /proc/kcore > /dev/null' on
devices using pstore with the ram backend because kmap_atomic() assumes
lowmem pages are accessible with __va().

 Unable to handle kernel paging request at virtual address ffffff807ff2b000
 Mem abort info:
 ESR = 0x96000006
 EC = 0x25: DABT (current EL), IL = 32 bits
 SET = 0, FnV = 0
 EA = 0, S1PTW = 0
 FSC = 0x06: level 2 translation fault
 Data abort info:
 ISV = 0, ISS = 0x00000006
 CM = 0, WnR = 0
 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000
 [ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000
 Internal error: Oops: 96000006 [#1] PREEMPT SMP
 Modules linked in: dm_integrity
 CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba
 Hardware name: Google Lazor (rev3 - 8) (DT)
 pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : __memcpy+0x110/0x260
 lr : vread+0x194/0x294
 sp : ffffffc013ee39d0
 x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000
 x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000
 x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000
 x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60
 x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001
 x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b
 x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000
 x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78
 x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000
 Call trace:
 __memcpy+0x110/0x260
 read_kcore+0x584/0x778
 proc_reg_read+0xb4/0xe4

During early boot, memblock reserves the pages for the ramoops reserved
memory node in DT that would otherwise be part of the direct lowmem
mapping. Pstore's ram backend reuses those reserved pages to change the
memory type (writeback or non-cached) by passing the pages to vmap()
(see pfn_to_page() usage in persistent_ram_vmap() for more details) with
specific flags. When read_kcore() starts iterating over the vmalloc
region, it runs over the virtual address that vmap() returned for
ramoops. In aligned_vread() the virtual address is passed to
vmalloc_to_page() which returns the page struct for the reserved lowmem
area. That lowmem page is passed to kmap_atomic(), which effectively
calls page_to_virt() that assumes a lowmem page struct must be directly
accessible with __va() and friends. These pages are mapped via vmap()
though, and the lowmem mapping was never made, so accessing them via the
lowmem virtual address oopses like above.

Let's side-step this problem by passing VM_IOREMAP to vmap(). This will
tell vread() to not include the ramoops region in the kcore. Instead the
area will look like a bunch of zeros. The alternative is to teach kmap()
about vmalloc areas that intersect with lowmem. Presumably such a change
isn't a one-liner, and there isn't much interest in inspecting the
ramoops region in kcore files anyway, so the most expedient route is
taken for now.

Cc: Brian Geffon <bgeffon@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 404a6043385d ("staging: android: persistent_ram: handle reserving and mapping memory")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221205233136.3420802-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: mmp: fix timer_read delay

[ Upstream commit e348b4014c31041e13ff370669ba3348c4d385e3 ]

timer_read() was using an empty 100-iteration loop to wait for the
TMR_CVWR register to capture the latest timer counter value. The delay
wasn't long enough. This resulted in CPU idle time being extremely
underreported on PXA168 with CONFIG_NO_HZ_IDLE=y.

Switch to the approach used in the vendor kernel, which implements the
capture delay by reading TMR_CVWR a few times instead.

Fixes: 49cbe78637eb ("[ARM] pxa: add base support for Marvell's PXA168 processor line")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20221204005117.53452-3-doug@schmorgal.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pstore/ram: Fix error return code in ramoops_probe()

[ Upstream commit e1fce564900f8734edf15b87f028c57e14f6e28d ]

In the if (dev_of_node(dev) && !pdata) path, the "err" may be assigned a
value of 0, so the error return code -EINVAL may be incorrectly set
to 0. To fix set valid return code before calling to goto.

Fixes: 35da60941e44 ("pstore/ram: add Device Tree bindings")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1669969374-46582-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

seccomp: Move copy_seccomp() to no failure path.

[ Upstream commit a1140cb215fa13dcec06d12ba0c3ee105633b7c4 ]

Our syzbot instance reported memory leaks in do_seccomp() [0], similar
to the report [1].  It shows that we miss freeing struct seccomp_filter
and some objects included in it.

We can reproduce the issue with the program below [2] which calls one
seccomp() and two clone() syscalls.

The first clone()d child exits earlier than its parent and sends a
signal to kill it during the second clone(), more precisely before the
fatal_signal_pending() test in copy_process().  When the parent receives
the signal, it has to destroy the embryonic process and return -EINTR to
user space.  In the failure path, we have to call seccomp_filter_release()
to decrement the filter's refcount.

Initially, we called it in free_task() called from the failure path, but
the commit 3a15fb6ed92c ("seccomp: release filter after task is fully
dead") moved it to release_task() to notify user space as early as possible
that the filter is no longer used.

To keep the change and current seccomp refcount semantics, let's move
copy_seccomp() just after the signal check and add a WARN_ON_ONCE() in
free_task() for future debugging.

[0]:
unreferenced object 0xffff8880063add00 (size 256):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.914s)
  hex dump (first 32 bytes):
    01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00  ................
    ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
  backtrace:
    do_seccomp (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/seccomp.c:666 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffffc90000035000 (size 4096):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    __vmalloc_node_range (mm/vmalloc.c:3226)
    __vmalloc_node (mm/vmalloc.c:3261 (discriminator 4))
    bpf_prog_alloc_no_stats (kernel/bpf/core.c:91)
    bpf_prog_alloc (kernel/bpf/core.c:129)
    bpf_prog_create_from_user (net/core/filter.c:1414)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888003fa1000 (size 1024):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    bpf_prog_alloc_no_stats (./include/linux/slab.h:600 ./include/linux/slab.h:733 kernel/bpf/core.c:95)
    bpf_prog_alloc (kernel/bpf/core.c:129)
    bpf_prog_create_from_user (net/core/filter.c:1414)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff888006360240 (size 16):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 16 bytes):
    01 00 37 00 76 65 72 6c e0 83 01 06 80 88 ff ff  ..7.verl........
  backtrace:
    bpf_prog_store_orig_filter (net/core/filter.c:1137)
    bpf_prog_create_from_user (net/core/filter.c:1428)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
unreferenced object 0xffff8880060183e0 (size 8):
  comm "repro_seccomp", pid 230, jiffies 4294687090 (age 9.915s)
  hex dump (first 8 bytes):
    06 00 00 00 00 00 ff 7f                          ........
  backtrace:
    kmemdup (mm/util.c:129)
    bpf_prog_store_orig_filter (net/core/filter.c:1144)
    bpf_prog_create_from_user (net/core/filter.c:1428)
    do_seccomp (kernel/seccomp.c:671 kernel/seccomp.c:708 kernel/seccomp.c:1871 kernel/seccomp.c:1991)
    do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
    entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

[1]: https://syzkaller.appspot.com/bug?id=2809bb0ac77ad9aa3f4afe42d6a610aba594a987

[2]:

void main(void)
{
struct sock_filter filter[] = {
BPF_STMT(BPF_RET | BPF_K, SECCOMP_RET_ALLOW),
};
struct sock_fprog fprog = {
.len = sizeof(filter) / sizeof(filter[0]),
.filter = filter,
};
long i, pid;

syscall(__NR_seccomp, SECCOMP_SET_MODE_FILTER, 0, &fprog);

for (i = 0; i < 2; i++) {
pid = syscall(__NR_clone, CLONE_NEWNET | SIGKILL, NULL, NULL, 0);
if (pid == 0)
return;
}
}

Fixes: 3a15fb6ed92c ("seccomp: release filter after task is fully dead")
Reported-by: syzbot+ab17848fe269b573eb71@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220823154532.82913-1-kuniyu@amazon.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC

[ Upstream commit 21aad8ba615e9c39cee6c5d0b76726f63791926c ]

MCP7940MT-I/MNY RTC has connected interrupt line to GPIO2_5.

Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: turris-omnia: Add switch port 6 node

[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ]

Switch port 6 is connected to eth0, so add appropriate device tree node for it.

Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: turris-omnia: Add ethernet aliases

[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ]

This allows bootloader to correctly pass MAC addresses used by bootloader
to individual interfaces into kernel device tree.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP")
Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable")
Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port

[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ]

BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.

Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name

[ Upstream commit 5f535cc583759c9c60d4cc9b8d221762e2d75387 ]

Update its unit name to oscillator-26m and remove the unneeded unit
address to fix a unit_address_vs_reg warning.

Fixes: 464c510f60c6 ("arm64: dts: mediatek: add mt6797 support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: pumpkin-common: Fix devicetree warnings

[ Upstream commit 509438336ce75c8b4e6ce8e8d507dc77d0783bdd ]

Fix the pinctrl submodes and optee node to remove unneeded unit address,
fixing all unit_address_vs_reg warnings.

Fixes: 9983822c8cf9 ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712-evb: Fix usb vbus regulators unit names

[ Upstream commit ec1ae39a8d25cfb067b5459fac7c5b7b9bce6f6a ]

Update the names to regulator-usb-p{0-3}-vbus to fix unit_address_vs_reg
warnings for those.

Fixes: 1724f4cc5133 ("arm64: dts: Add USB3 related nodes for MT2712")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names

[ Upstream commit 377063156893bf6c088309ac799fe5c6dce2822d ]

Update the names to regulator-vproc-buck{0,1} to fix unit_addres_vs_reg
warnings for those.

Fixes: f75dd8bdd344 ("arm64: dts: mediatek: add mt2712 cpufreq related device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712e: Fix unit address for pinctrl node

[ Upstream commit 1d4516f53a611b362db7ba7a8889923d469f57e1 ]

The unit address for the pinctrl node is (0x)1000b000 and not
(0x)10005000, which is the syscfg_pctl_a address instead.

This fixes the following warning:
arch/arm64/boot/dts/mediatek/mt2712e.dtsi:264.40-267.4: Warning
(unique_unit_address): /syscfg_pctl_a@10005000: duplicate
unit-address (also used in node /pinctrl@10005000)

Fixes: f0c64340b748 ("arm64: dts: mt2712: add pintcrl device node.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators

[ Upstream commit e4495a0a8b3d84816c9a46edf3ce060bbf267475 ]

Rename the fixed-clock oscillators to remove the unit address.

This solves unit_address_vs_reg warnings.

Fixes: 5d4839709c8e ("arm64: dts: mt2712: Add clock controller device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mt6779: Fix devicetree build warnings

[ Upstream commit 4d759c524c15dc4151e40b9e3f368147fda7b789 ]

Rename fixed-clock oscillators to oscillator-26m and oscillator-32k
and remove the unit address to fix the unit_address_vs_reg warning;
fix the unit address for interrupt and intpol controllers by
removing a leading zero in their unit address.

This commit fixes the following warnings:

(unit_address_vs_reg): /oscillator@0: node has a unit name, but
no reg or ranges property
(unit_address_vs_reg): /oscillator@1: node has a unit name, but
no reg or ranges property
(simple_bus_reg): /soc/interrupt-controller@0c000000: simple-bus
unit address format error, expected "c000000"
(simple_bus_reg): /soc/intpol-controller@0c53a650: simple-bus
unit address format error, expected "c53a650"

Fixes: 4c7a6260775d ("arm64: dts: add dts nodes for MT6779")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: nuvoton: Remove bogus unit addresses from fixed-partition nodes

[ Upstream commit ea3ce4cf076ba11bb591c8013c5315136cae52c8 ]

The unit addresses do not correspond to the nodes' reg properties,
because they don't have any.

Fixes: e42b650f828d ("ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB")
Fixes: ee33e2fb3d70 ("ARM: dts: nuvoton: Add Quanta GBS BMC Device Tree")
Fixes: 59f5abe09f0a ("ARM: dts: nuvoton: Add Quanta GSJ BMC")
Fixes: 14579c76f5ca ("ARM: dts: nuvoton: Add Fii Kudo system")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20221031221553.163273-1-j.neuschaefer@gmx.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>