platform/kernel/u-boot.git
9 years agotegra: Set CNTFRQ for secondary CPUs
Jan Kiszka [Tue, 21 Apr 2015 05:18:37 +0000 (07:18 +0200)]
tegra: Set CNTFRQ for secondary CPUs

We only set CNTFRQ in arch_timer_init for the boot CPU. But this has to
happen for all cores.

Fixing this resolves problems of KVM with emulating the generic
timer/counter.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0
Ian Campbell [Tue, 21 Apr 2015 05:18:36 +0000 (07:18 +0200)]
tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0

These registers can be used to prevent non-secure world from accessing a
megabyte aligned region of RAM, use them to protect the u-boot secure monitor
code.

At first I tried to do this from s_init(), however this inexplicably causes
u-boot's networking (e.g. DHCP) to fail, while networking under Linux was fine.

So instead I have added a new weak arch function protect_secure_section()
called from relocate_secure_section() and reserved the region there. This is
better overall since it defers the reservation until after the sec vs. non-sec
decision (which can be influenced by an envvar) has been made when booting the
os.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
[Jan: tiny style adjustment]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra124: Add PSCI support for Tegra124
Jan Kiszka [Tue, 21 Apr 2015 05:18:35 +0000 (07:18 +0200)]
tegra124: Add PSCI support for Tegra124

This is based on Thierry Reding's work and uses Ian Campell's
preparatory patches. It comes with full support for CPU_ON/OFF PSCI
services. The algorithm used in this version for turning CPUs on and
off was proposed by Peter De Schrijver and Thierry Reding in
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/210881. It
consists of first enabling CPU1..3 via the PMC, just to powergate them
again with the help of the Flow Controller. Once the Flow Controller is
in place, we can leave the PMC alone while processing CPU_ON and CPU_OFF
PSCI requests.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: Add board-specific initialization hook for PSCI
Jan Kiszka [Tue, 21 Apr 2015 05:18:34 +0000 (07:18 +0200)]
ARM: Add board-specific initialization hook for PSCI

Tegra boards will have to initialize power management for the PSCI
support this way.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: Make tegra_powergate_power_on public
Jan Kiszka [Tue, 21 Apr 2015 05:18:33 +0000 (07:18 +0200)]
tegra: Make tegra_powergate_power_on public

Will be used for unpowergating CPUs.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agovirt-dt: Allow reservation of secure region when in a RAM carveout
Jan Kiszka [Tue, 21 Apr 2015 05:18:32 +0000 (07:18 +0200)]
virt-dt: Allow reservation of secure region when in a RAM carveout

In this case the secure code lives in RAM, and hence the memory node in
the device tree needs to be adjusted. This avoids that the OS will map
and possibly access the reservation.

Add support for setting CONFIG_ARMV7_SECURE_RESERVE_SIZE to carve out
such a region. We only support cutting off memory from the beginning or
the end of a RAM bank as we do not want to increase their number (which
would happen if punching a hole) for simplicity reasons

This will be used in a subsequent patch for Jetson-TK1.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra124: Add more registers to struct mc_ctlr
Ian Campbell [Tue, 21 Apr 2015 05:18:31 +0000 (07:18 +0200)]
tegra124: Add more registers to struct mc_ctlr

I will need mc_security_cfg0/1 in a future patch and I added the rest while
debugging, so thought I might as well commit them.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: Put target PC for PSCI CPU_ON on per-CPU stack
Jan Kiszka [Tue, 21 Apr 2015 05:18:30 +0000 (07:18 +0200)]
ARM: Put target PC for PSCI CPU_ON on per-CPU stack

Use a per-CPU variable for saving the target PC during CPU_ON
operations. This allows us to run this service independently on targets
that have more than 2 cores and also core-local power control.

CC: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: Factor out reusable psci_get_cpu_stack_top
Jan Kiszka [Tue, 21 Apr 2015 05:18:29 +0000 (07:18 +0200)]
ARM: Factor out reusable psci_get_cpu_stack_top

This algorithm will be useful on Tegra as well, plus we will need it for
making _psci_target_pc per-CPU.

CC: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: Factor out reusable psci_cpu_entry
Jan Kiszka [Tue, 21 Apr 2015 05:18:28 +0000 (07:18 +0200)]
ARM: Factor out reusable psci_cpu_entry

_sunxi_cpu_entry can be converted completely into a reusable
psci_cpu_entry. Tegra124 will use it as well.

As with psci_disable_smp, also the enabling is designed to be overloaded
in cased SMP is not controlled via ACTLR.

CC: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: Factor out reusable psci_cpu_off_common
Jan Kiszka [Tue, 21 Apr 2015 05:18:27 +0000 (07:18 +0200)]
ARM: Factor out reusable psci_cpu_off_common

Move parts of sunxi's psci_cpu_off into psci_cpu_off_common, namely
cache disabling and flushing, clrex and the disabling of SMP for the
dying CPU. These steps are apparently generic for ARMv7 and will be
reused for Tegra124 support.

As the way of disabled SMP is not architectural, though commonly done
via ACLTR, the related function can be overloaded.

CC: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: Factor out common psci_get_cpu_id
Jan Kiszka [Tue, 21 Apr 2015 05:18:26 +0000 (07:18 +0200)]
ARM: Factor out common psci_get_cpu_id

Will be required for obtaining the ID of the current CPU in shared PSCI
functions. The default implementation requires a dense ID space and only
supports a single cluster. Therefore, the functions can be overloaded in
cases where these assumptions do not hold.

CC: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions
Jan Kiszka [Tue, 21 Apr 2015 05:18:24 +0000 (07:18 +0200)]
ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions

CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to
be taken into account additionally. CONFIG_ARMV7_PSCI is only set on
boards that support CONFIG_ARMV7_NONSEC, and it only works on those.

CC: Tang Yuantian <Yuantian.Tang@freescale.com>
CC: York Sun <yorksun@freescale.com>
CC: Steve Rae <srae@broadcom.com>
CC: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: tegra: enable STDIO deregistration
Stephen Warren [Tue, 14 Apr 2015 14:41:14 +0000 (08:41 -0600)]
ARM: tegra: enable STDIO deregistration

At the very least when USB keyboard support is enabled, we need to enable
CONFIG_SYS_STDIO_DEREGISTER, so the "usb reset" is able to re-scan USB
ports and find new devices. Enable it everywhere per request from Simon
Glass.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization
Stephen Warren [Wed, 1 Apr 2015 21:40:53 +0000 (15:40 -0600)]
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization

As best I can tell, CONFIG_SYS_LOAD_ADDR and CONFIG_LOADADDR/$loadaddr
serve essentially the same purpose. Roughly, if a command takes a load
address, then CONFIG_SYS_LOAD_ADDR or $loadaddr (or both) are the default
if the command-line does not specify the address. Different U-Boot
commands are inconsistent re: which of the two default values they use.
As such, set the two to the same value, and move the logic that does this
 into tegra-common-post.h so it's not duplicated. A number of other non-
Tegra boards do this too.

The values chosen for these macros are no longer consistent with anything
in MEM_LAYOUT_ENV_SETTINGS. Regain consistency by setting $kernel_addr_r
to CONFIG_LOADADDR. Older scripts tend to use $loadaddr for the default
kernel load address, whereas newer scripts and features tend to use
$kernel_addr_r, along with other variables for other purposes such as
DTBs and initrds. Hence, it's logical they should share the same value.

I had originally thought to make the $kernel_addr_r and CONFIG_LOADADDR
have different values. This would guarantee no interference if a script
used the two variables for different purposes. However, that scenario is
unlikely given the semantic meaning associated with the two variables.
The lowest available value is 0x90200000; see comments for
MEM_LAYOUT_ENV_SETTINGS in tegra30-common-post.h for details. However,
that value would be problematic for a script that loaded a raw zImage to
$loadaddr, since it's more than 128MB beyond the start of SDRAM, which
would interfere with the kernel's CONFIG_AUTO_ZRELADDR. So, let's not do
that.

The only potential fallout I could foresee from this patch is if someone
has a script that loads the kernel to $loadaddr, but some other file
(DTB, initrd) to a hard-coded address that the new value of $loadaddr
interferes with. This seems unlikely. A user should not do that; they
should either hard-code all load addresses, or use U-Boot-supplied
variables for all load addresses. Equally, any fallout due to this change
is trivial to fix; simply modify the load addresses in that script.

Cc: Paul Walmsley <pwalmsley@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Paul Walmsley <pwalmsley@nvidia.com>
Reviewed-by: Simon Glass
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra124: video: Add full link training for eDP
Simon Glass [Wed, 15 Apr 2015 03:03:44 +0000 (21:03 -0600)]
tegra124: video: Add full link training for eDP

Add full link training as a fallback in case the fast link training
fails.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: config: nyan-big: Enable LCD
Simon Glass [Wed, 15 Apr 2015 03:03:43 +0000 (21:03 -0600)]
tegra: config: nyan-big: Enable LCD

Add the PMIC, LCD settings, PWM and also show the board info at the top of
the LCD when starting up.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: video: support eDP displays on Tegra124 devices
Simon Glass [Wed, 15 Apr 2015 03:03:42 +0000 (21:03 -0600)]
tegra: video: support eDP displays on Tegra124 devices

Connect up the clocks and the eDP driver to make these displays work with
Tegra124-based devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: video: Add Embedded DisplayPort driver
Simon Glass [Wed, 15 Apr 2015 03:03:41 +0000 (21:03 -0600)]
tegra: video: Add Embedded DisplayPort driver

This interface is used on laptop devices based on Tegra. Add a driver which
provides access to the eDP interface. The driver uses the display port
uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: video: Support serial output resource (SOR) on tegra124
Simon Glass [Wed, 15 Apr 2015 03:03:40 +0000 (21:03 -0600)]
tegra: video: Support serial output resource (SOR) on tegra124

The SOR is required for talking to eDP LCD panels. Add a driver for this
which will be used by the DisplayPort driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: dts: nyan-big: Add definitions for eDP display
Simon Glass [Wed, 15 Apr 2015 03:03:39 +0000 (21:03 -0600)]
tegra: dts: nyan-big: Add definitions for eDP display

Add the various host1x peripherals to allow an eDP display to be connected.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agodm: video: Add a uclass for display port
Simon Glass [Wed, 15 Apr 2015 03:03:38 +0000 (21:03 -0600)]
dm: video: Add a uclass for display port

eDP (Embedded DisplayPort) is a standard widely used in laptops to drive
LCD panels. Add a uclass for this which supports a few simple operations.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoedid: Add a function to read detailed monitor timings
Simon Glass [Wed, 15 Apr 2015 03:03:37 +0000 (21:03 -0600)]
edid: Add a function to read detailed monitor timings

For digital displays (such as EDP LCDs) we would like to read the EDID
information and use that to set display timings. Provide a function to do
this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agovideo: Add drm_dp_helper.h
Simon Glass [Wed, 15 Apr 2015 03:03:36 +0000 (21:03 -0600)]
video: Add drm_dp_helper.h

This file (from Linux 3.17) provides defines for display port. Use it so
that our naming is consistent with Linux.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: Move display controller header into common
Simon Glass [Wed, 15 Apr 2015 03:03:35 +0000 (21:03 -0600)]
tegra: Move display controller header into common

Allow this to be used by other Tegra SoCs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra124: clock: Add display clocks and functions
Simon Glass [Wed, 15 Apr 2015 03:03:34 +0000 (21:03 -0600)]
tegra124: clock: Add display clocks and functions

Add functions to provide access to the display clocks on Tegra124 including
setting the clock rate for an EDP display.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: clock: Split the clock source code into a separate function
Simon Glass [Wed, 15 Apr 2015 03:03:33 +0000 (21:03 -0600)]
tegra: clock: Split the clock source code into a separate function

Create a function which sets the source clock for a peripheral, given
the number of mux bits to adjust. This can then be used more generally.
For now, don't export it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: clock: Add checking for invalid clock IDs
Simon Glass [Wed, 15 Apr 2015 03:03:32 +0000 (21:03 -0600)]
tegra: clock: Add checking for invalid clock IDs

The get_pll() function can do the wrong thing if passed values that are
out of range. Add checks for this and add a function which can return
a 'simple' PLL. This can be defined by SoCs with their own clocks.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: config: Use CONFIG_LCD to detect LCD presence
Simon Glass [Wed, 15 Apr 2015 03:03:31 +0000 (21:03 -0600)]
tegra: config: Use CONFIG_LCD to detect LCD presence

Instead of CONFIG_VIDEO_TEGRA, use CONFIG_LCD to determine whether an LCD
is present. Tegra124 uses a different driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra124: dts: Add host1x node to provide display information
Simon Glass [Wed, 15 Apr 2015 03:03:30 +0000 (21:03 -0600)]
tegra124: dts: Add host1x node to provide display information

This peripheral is required to get the LCD display running. Add it to
tegra124 and also bring in the binding file from Linux 3.18

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: nyan-big: Add LCD PMIC init and board ID
Simon Glass [Wed, 15 Apr 2015 03:03:29 +0000 (21:03 -0600)]
tegra: nyan-big: Add LCD PMIC init and board ID

Add required setup for the LCD display, and a function to provide the
board ID. This requires GPIOs to be available prior to relocation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: Add support for setting up a as3722 PMIC
Simon Glass [Wed, 15 Apr 2015 03:03:28 +0000 (21:03 -0600)]
tegra: Add support for setting up a as3722 PMIC

Add support for this PMIC which is used on some Tegra124 boards.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: Provide a function to allow LCD PMIC setup
Simon Glass [Wed, 15 Apr 2015 03:03:27 +0000 (21:03 -0600)]
tegra: Provide a function to allow LCD PMIC setup

Some LCDs require a PMIC to be set up - add a function for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agopower: Export register access functions from as3722
Simon Glass [Wed, 15 Apr 2015 03:03:26 +0000 (21:03 -0600)]
power: Export register access functions from as3722

With the full PMIC framework we may be able to avoid this. But for now
we need access to the PMIC.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: Add a board ID function
Simon Glass [Wed, 15 Apr 2015 03:03:25 +0000 (21:03 -0600)]
tegra: Add a board ID function

Add a way of displaying a numeric board ID on start-up.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: Move checkboard() into the board code
Simon Glass [Wed, 15 Apr 2015 03:03:24 +0000 (21:03 -0600)]
tegra: Move checkboard() into the board code

This is only used by Nvidia boards, so move it into nvidia/common to
simplify things.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: pwm: Allow the clock rate to be left as is
Simon Glass [Wed, 15 Apr 2015 03:03:23 +0000 (21:03 -0600)]
tegra: pwm: Allow the clock rate to be left as is

When enabling a PWM, allow the existing clock rate and source to stand
unchanged.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agotegra: Move the pwm into tegra-common
Simon Glass [Wed, 15 Apr 2015 03:03:22 +0000 (21:03 -0600)]
tegra: Move the pwm into tegra-common

This is needed for tegra124 also, so make it common and add a header file
for tegra124.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agofdt: Add binding decode function for display-timings
Simon Glass [Wed, 15 Apr 2015 03:03:21 +0000 (21:03 -0600)]
fdt: Add binding decode function for display-timings

This is useful for display parameters. Add a simple decode function to read
from this device tree node.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agodm: gpio: Add error handling and a function to claim vector GPIOs
Simon Glass [Wed, 15 Apr 2015 03:03:20 +0000 (21:03 -0600)]
dm: gpio: Add error handling and a function to claim vector GPIOs

gpio_get_values_as_int() should return an error if something goes wrong.
Also provide gpio_claim_vector(), a function to request the GPIOs and set
them to input mode. Otherwise callers have to do this themselves.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agodm: core: Sort the uclasses
Simon Glass [Wed, 15 Apr 2015 03:03:19 +0000 (21:03 -0600)]
dm: core: Sort the uclasses

Sort uclasses into alphabetical order and tidy up the comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
9 years agoClean all defconfigs with savedefconfig
Joe Hershberger [Tue, 12 May 2015 19:46:24 +0000 (14:46 -0500)]
Clean all defconfigs with savedefconfig

In order to reduce merge conflicts and to maintain the simplest possible
defconfig files, we should be using the savedefconfig feature of Kconfig
every time a new feature is added. This keeps the defconfig settings to
a minimum (only those things not default) and keeps them in the same
order as the Kconfig options.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>
9 years agoarch: Make board selection choices optional
Joe Hershberger [Tue, 12 May 2015 19:46:23 +0000 (14:46 -0500)]
arch: Make board selection choices optional

By making the board selections optional, every defconfig will include
the board selection when running savedefconfig so if a new board is
added to the top of the list of choices the former top's defconfig will
still be correct.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>
9 years agoRevert "stm32f4: fix serial output"
Tom Rini [Sun, 10 May 2015 20:01:48 +0000 (16:01 -0400)]
Revert "stm32f4: fix serial output"

As per the author, we don't need this patch really since the other patch
"stm32f4: fix serial output" superseded it.

This reverts commit 85e5f5b7a7f8d889271f94791606cde62d81d53f.

Signed-off-by: Tom Rini <trini@konsulko.com>
9 years agokconfig: Move REGEX to Kconfig
Joe Hershberger [Tue, 21 Apr 2015 22:02:42 +0000 (17:02 -0500)]
kconfig: Move REGEX to Kconfig

Having this as a Kconfig allows it to be a dependent feature.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
9 years agoppc4xx: Remove sc3 board
Stefan Roese [Thu, 7 May 2015 11:00:23 +0000 (13:00 +0200)]
ppc4xx: Remove sc3 board

As this board seems to be unmaintained for quite some time, and its
not moved to the generic board ingrastructure, lets remove it.

This will also enable us to remove the CONFIG_AUTOBOOT_DELAY_STR2
and CONFIG_AUTOBOOT_STOP_STR2 macros, as this sc3 board is the
only one using one of this macros. A removal patch will follow
soon.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Juergen Beisert <jbeisert@eurodsn.de>
Acked-by: Heiko Schocher <hs@denx.de>
9 years agoserial: fdt: add device tree support for pl01x
Vikas Manocha [Wed, 6 May 2015 18:46:29 +0000 (11:46 -0700)]
serial: fdt: add device tree support for pl01x

This patch adds device tree support for arm pl010/pl011 driver.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agoFix broken verify functionality in crc32 command
Joe Hershberger [Tue, 5 May 2015 17:23:53 +0000 (12:23 -0500)]
Fix broken verify functionality in crc32 command

Introduced in change d20a40de9db07de1f1f06a79a4da1cdda5379b75
"Roll crc32 into hash infrastructure"

The crc32 command with no -v expects an optional 3rd argument to be an
address to store the result in. With the -v switch, the last argument
is a crc, not an address. In the case where -v is set, we should set the
HASH_FLAG_ENV flag since that will first look for the value to be a
digest value, which matches the expected API for the crc32 command.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
9 years agoFix inconsistency of VERIFY defines in cmd_mem
Joe Hershberger [Tue, 5 May 2015 17:23:52 +0000 (12:23 -0500)]
Fix inconsistency of VERIFY defines in cmd_mem

Introduced in change d20a40de9db07de1f1f06a79a4da1cdda5379b75
"Roll crc32 into hash infrastructure"

Use a consistent define to enable the verify feature in crc32 command.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agoMakefile: add a symbol link tags for ctags
Du Huanpeng [Mon, 4 May 2015 13:26:53 +0000 (06:26 -0700)]
Makefile: add a symbol link tags for ctags

Signed-off-by: Du Huanpeng <u74147@gmail.com>
9 years agostv0991: use fdt for serial port platform data
Vikas Manocha [Sun, 3 May 2015 21:10:35 +0000 (14:10 -0700)]
stv0991: use fdt for serial port platform data

This patch ignores the serial port static platform data at compilation time
in case of device tree control.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
9 years agostv0991: fdt: add stv0991 device tree
Vikas Manocha [Sun, 3 May 2015 21:10:34 +0000 (14:10 -0700)]
stv0991: fdt: add stv0991 device tree

This patch adds device tree for the ST Micro stv0991 board & enables
device tree control. Progressively device tree support for the drivers
being used will also be added.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
9 years agoovero: Fix regression introduced in a6b541b
Arun Bharadwaj [Tue, 28 Apr 2015 23:55:30 +0000 (16:55 -0700)]
overo: Fix regression introduced in a6b541b

U-Boot has been broken on Overo boards since commit
a6b541b09022acb6f7c2754100ae26bd44eed1d9.

This is because the gd pointer is not set early enough anymore,
such that the i2c_set_bus_num in get_board_revision can safely
execute. This results in a console hang at SPL and the boot does
not proceed.

This piece of code is anyway necessary only for really old Overo
boards with revision numbers <= 2410 and not required for the newer
boards. For these older boards, u-boot v2014.10 still works fine.

Signed-off-by: Arun Bharadwaj <arun@gumstix.com>
9 years agoovero: Split overo.c into spl.c, common.c and overo.c
Arun Bharadwaj [Tue, 28 Apr 2015 23:55:29 +0000 (16:55 -0700)]
overo: Split overo.c into spl.c, common.c and overo.c

This separates the SPL-specific code from the u-boot-specific code for
the Overo board following the discussion at
http://lists.denx.de/pipermail/u-boot/2015-April/211622.html

The code is split up into spl.c, overo.c and common.c (which
has the code common to both)

Signed-off-by: Arun Bharadwaj <arun@gumstix.com>
9 years agoomap3: overo: Allow boot with kernel in UBI rootfs
Ash Charles [Tue, 28 Apr 2015 23:17:54 +0000 (16:17 -0700)]
omap3: overo: Allow boot with kernel in UBI rootfs

If regular NAND booting fails to find a valid uImage in the
kernel partition in NAND, try to boot using a zImage and dtb found
in a UBI volume in the rootfs partition.  This is the NAND analog
of mmc zImage booting for device-tree based kernels.

Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Arun Bharadwaj <arun@gumstix.com>
9 years agoomap3: overo: Use software BCH8 ECC for NAND
Ash Charles [Tue, 28 Apr 2015 23:17:53 +0000 (16:17 -0700)]
omap3: overo: Use software BCH8 ECC for NAND

Overo COMs have NAND flash that requires 4-bit ECC or better except for
the first sector which can use 1-bit ECC.  The boot ROM expects to load
a payload from NAND written using 1-bit hardware-based ECC.  In short,
write SPL to NAND something like this (4 times for redundancy):
 #> nandecc hw
 #> nand write ${loadaddr} 0x0 ${filesize}
 #> nand write ${loadaddr} 0x20000 ${filesize}
 #> nand write ${loadaddr} 0x40000 ${filesize}
 #> nand write ${loadaddr} 0x60000 ${filesize}

Then, switch back to software-based BCH8 for everything else:
 #> nandecc sw bch8

After [1], enlarge the max size of the SPL so the BCH code can fit.

[1] https://www.mail-archive.com/u-boot@lists.denx.de/msg163912.html

Signed-off-by: Ash Charles <ashcharles@gmail.com>
9 years agoovero: Add support for Palo35 expansion board
Ash Charles [Tue, 28 Apr 2015 23:17:52 +0000 (16:17 -0700)]
overo: Add support for Palo35 expansion board

Signed-off-by: Ash Charles <ashcharles@gmail.com>
9 years agoomap3: overo: Add DTS support for TobiDuo expansion
Arun Bharadwaj [Tue, 28 Apr 2015 23:17:51 +0000 (16:17 -0700)]
omap3: overo: Add DTS support for TobiDuo expansion

Signed-off-by: Arun Bharadwaj <arun@gumstix.com>
Signed-off-by: Ash Charles <ashcharles@gmail.com>
9 years agoomap3: overo: Set the Arbor43C 'expansionname'
Ash Charles [Tue, 28 Apr 2015 23:17:50 +0000 (16:17 -0700)]
omap3: overo: Set the Arbor43C 'expansionname'

The Gumstix Arbor43C expansion board [1] uses a customized device tree
file.  When this expansion board is detected, load this file.

[1] https://store.gumstix.com/index.php/products/635/

Signed-off-by: Ash Charles <ashcharles@gmail.com>
9 years agodavinci: restore CONFIG_SPL=y to configs/omapl138_lcdk_defconfig
Peter Howard [Tue, 28 Apr 2015 23:05:57 +0000 (09:05 +1000)]
davinci: restore CONFIG_SPL=y to configs/omapl138_lcdk_defconfig

Signed-off-by: Peter Howard <phoward@gme.net.au>
9 years agocmd_part: fix usage text
maxin.john@enea.com [Mon, 27 Apr 2015 23:44:58 +0000 (01:44 +0200)]
cmd_part: fix usage text

Fix the usage info from:
part part uuid <interface> <dev>:<part>
to
part uuid <interface> <dev>:<part>

Signed-off-by: Maxin B. John <maxin.john@enea.com>
Reviewed-By: Sjoerd Simons <sjoerd.simons@collabora.co.uk
9 years agostm32f4: add serial print port
kunhuahuang [Mon, 27 Apr 2015 19:01:19 +0000 (03:01 +0800)]
stm32f4: add serial print port

Add the stm32F4 board's serial ports support.
User can use it easily.
The user only need to edit the number of the usart.
The patch also fix the serial print out.

Last, this version of patch fix the first patch checkpatch.pl error.
Thanks to Kamil Lulko.

Signed-off-by: kunhuahuang <huangkunhua@gmail.com>
9 years agostm32f4: fix serial output
kunhuahuang [Mon, 27 Apr 2015 18:25:45 +0000 (02:25 +0800)]
stm32f4: fix serial output

This patch fix the serial output.
The source is from Kamil Lulko's "stm32f429-discovery board support"

Thanks, Varcain. I learned a lot.

Signed-off-by: kunhuahuang <huangkunhua@gmail.com>
9 years agospl: spl_mmc: Partition raw boot mode for eMMC
Paul Kocialkowski [Mon, 27 Apr 2015 08:20:23 +0000 (10:20 +0200)]
spl: spl_mmc: Partition raw boot mode for eMMC

This adds support for providing a partition number instead of a sector for eMMC.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
9 years agospl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics
Paul Kocialkowski [Mon, 27 Apr 2015 08:20:22 +0000 (10:20 +0200)]
spl: spl_mmc: Clearer structure in spl_mmc_load_image and cosmetics

This refactors spl_mmc_load_image to use a switch/case structure and easier
to understand spl_start_uboot checks. This also introduces some more automatic
fallback on the next mmc boot mode as long as it keeps failing.

Lines that go beyond 80 chars are also reduced by reducing the number of tabs.
Debug and error strings are refctored to match a common style.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
[trini: Fix a thinko in the SPL_EXT_SUPPORT + SPL_OS conversion, make part be
 __maybe_unused]
Signed-off-by: Tom Rini <trini@konsulko.com>
9 years agogpio: stm32_gpio: Use clrsetbits_le32() at appropriate places
Axel Lin [Sun, 26 Apr 2015 02:32:36 +0000 (10:32 +0800)]
gpio: stm32_gpio: Use clrsetbits_le32() at appropriate places

Use clrsetbits_le32() to replace clrbits_le32() + setbits_le32().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
9 years agoboard/BuR/common: rename "usbupdate" environment to "usbscript"
Hannes Petermaier [Fri, 24 Apr 2015 12:49:39 +0000 (14:49 +0200)]
board/BuR/common: rename "usbupdate" environment to "usbscript"

usbupdate in real does allways load some script from usb-storage and execute
it, on all B&R targets.

So we do following 2 things:
- rename it to what it really does
- move it from boards to common environment

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
9 years agoboard/BuR/common: remove BMP_DISPLAY from tseries board
Hannes Petermaier [Fri, 24 Apr 2015 12:49:38 +0000 (14:49 +0200)]
board/BuR/common: remove BMP_DISPLAY from tseries board

Since we display in future the splash screen out of linux-os, we don't need
this support anymore within the common section.

But kwb-target is still using BMP_DISPLAY feature, so we move the related
from the common section into the target-specific.

Also the default environment of tseries will be adapted to this.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
9 years agoboard/BuR/tseries: Add simplefb support
Hannes Petermaier [Fri, 24 Apr 2015 12:49:37 +0000 (14:49 +0200)]
board/BuR/tseries: Add simplefb support

Since the used AM3352 SoC doesn't have GPU it isn't allways necessary to build
in complete drm-stuff into linux kernel. In very small applications only we use
the simple-framebuffer.

So we have 2 use-cases:
- device operating on drm-driver (let simplefb node disabled)
- device operating on simplefb-driver (activate simplefb node and reserve mem)

The decision is made by means of "simplefb" environment variable.

simplefb = 0
we don't enable the (maybe) existing simplefb node and all the rest around
display is up to the linux-kernel. We just disable the backlight, beceause we
do not want see the flicker during take over of drm-driver.

simplefb = 1
we enable the (maybe) existing simplefb node and reserve framebuffers size
in memory.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
9 years agoboard/BuR/tseries: remove unnary CONFIG_LCD_NOSTDOUT
Hannes Petermaier [Fri, 24 Apr 2015 12:49:36 +0000 (14:49 +0200)]
board/BuR/tseries: remove unnary CONFIG_LCD_NOSTDOUT

the CONFIG_LCD_NOSTDOUT feature never had become mainline in uboot due to the
fact that the problem of "not writing out whole console to lcd" can be solved
with another way.

So we remove this unnary define.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
9 years agoboard/BuR/tseries: take usage of CONFIG_LCD_ROTATION
Hannes Petermaier [Fri, 24 Apr 2015 12:49:35 +0000 (14:49 +0200)]
board/BuR/tseries: take usage of CONFIG_LCD_ROTATION

We take use of the new LCD_ROTATION feature.
The information about how the display is rotated is taken from B&R specific
(/factory-settings/rotation) information in the devicetree.

The information there is stored as string (cw, ud, ccw, none) since starting
support of this devices and cannot be changed, so we have to convert it into

none = 0
cw   = 1
ud   = 2
ccw  = 3

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
9 years agoimage: android: handle default kernel address
Maxime Ripard [Fri, 24 Apr 2015 10:53:12 +0000 (12:53 +0200)]
image: android: handle default kernel address

The two tools that create android boot images, mkbootimg and the fastboot
client, set the kernel address by default to 0x10008000.

U-boot always honors this field, and will try to relocate the kernel to
whatever value is set in the header, which won't be mapped to the actual RAM on
most platforms, resulting in the kernel obviously not booting.

All the targets in U-Boot right now will download the android boot image to
CONFIG_SYS_LOAD_ADDR, which means that it will already have been downloaded to
some location that is suitable for execution.

In order to have the kernel booting even with the default boot image kernel
address, if that address is used, just execute the kernel where it is.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
9 years agoRemove non-working address from MAINTAINER
Pavel Machek [Thu, 23 Apr 2015 07:10:36 +0000 (09:10 +0200)]
Remove non-working address from MAINTAINER

I checked with Detlev, and sadly removing that maintainers entry is
right thing to do.

Signed-off-by: Pavel Machek <pavel@denx.de>
9 years agoFix musl build
Jörg Krause [Wed, 22 Apr 2015 19:36:22 +0000 (21:36 +0200)]
Fix musl build

This patch fixes cross-compiling U-Boot tools with the musl C library:
  * including <sys/types.h> is needed for ulong
  * defining _GNU_SOURCE is needed for loff_t

Tested for target at91sam9261ek_dataflash_cs3.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Tom Rini <trini@konsulko.com>
9 years agomisc: led: Add PCA9551 LED driver
Stefan Roese [Thu, 12 Mar 2015 10:22:46 +0000 (11:22 +0100)]
misc: led: Add PCA9551 LED driver

This patch adds a driver for the PCA9551 LED controller.

Originated-by: Timo Herbrecher <t.herbrecher@gateware.de>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
9 years agoREADME: fix typo in 'currently'
Fabio Estevam [Sat, 25 Apr 2015 21:53:10 +0000 (18:53 -0300)]
README: fix typo in 'currently'

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoti: am335x/am437x/omap5 devices: Unify network environment variables
Cooper Jr., Franklin [Tue, 21 Apr 2015 12:51:04 +0000 (07:51 -0500)]
ti: am335x/am437x/omap5 devices: Unify network environment variables

Across several devices network environment variables are duplicated.
Move these variables to a common include file which insures the environment
variables are reused and insures devices across product lines share the same
values.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
9 years agoMerge git://git.denx.de/u-boot-dm
Tom Rini [Fri, 8 May 2015 14:46:59 +0000 (10:46 -0400)]
Merge git://git.denx.de/u-boot-dm

9 years agogit-mailrc: add Dinh Nguyen as a contact for SoCFPGA
Dinh Nguyen [Thu, 7 May 2015 22:37:12 +0000 (17:37 -0500)]
git-mailrc: add Dinh Nguyen as a contact for SoCFPGA

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
9 years agogit-mailrc: add Marek as SOCFPGA maintainer
Masahiro Yamada [Tue, 21 Apr 2015 03:08:32 +0000 (12:08 +0900)]
git-mailrc: add Marek as SOCFPGA maintainer

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoARM: socfpga: abolish CONFIG_SOCFPGA
Masahiro Yamada [Tue, 21 Apr 2015 11:38:23 +0000 (20:38 +0900)]
ARM: socfpga: abolish CONFIG_SOCFPGA

Replace CONFIG_SOCFPGA with CONFIG_ARCH_SOCFPGA.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoARM: socfpga: move SoC headers to mach-socfpga/include/mach
Masahiro Yamada [Tue, 21 Apr 2015 11:38:22 +0000 (20:38 +0900)]
ARM: socfpga: move SoC headers to mach-socfpga/include/mach

Move headers to mach-socfpga as well.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoARM: socfpga: move SoC sources to mach-socfpga
Masahiro Yamada [Tue, 21 Apr 2015 11:38:21 +0000 (20:38 +0900)]
ARM: socfpga: move SoC sources to mach-socfpga

Our recent trend is to collect SoC files into arch/arm/mach-(SOC).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoARM: socfpga: move board select into mach-socfpga/Kconfig
Masahiro Yamada [Tue, 21 Apr 2015 11:38:20 +0000 (20:38 +0900)]
ARM: socfpga: move board select into mach-socfpga/Kconfig

Switch to a more standard way of board select; put the SoC select
into arch/arm/Kconfig and move the board select menu under
arch/arm/mach-socfpga/Kconfig.

Also, consolidate SYS_BOARD, SYS_VENDOR, SYS_SOC, SYS_CONFIG_NAME.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoARM: socfpga: remove redundant config.mk
Masahiro Yamada [Tue, 21 Apr 2015 11:38:19 +0000 (20:38 +0900)]
ARM: socfpga: remove redundant config.mk

Because all the SOCFPGA boards define CONFIG_SPL_FRAMEWORK
(see include/configs/socfpga_common.h), u-boot.img is automatically
added to the target image list by the top Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoARM: socfpga: do not add board directory to header search path
Masahiro Yamada [Tue, 21 Apr 2015 11:38:18 +0000 (20:38 +0900)]
ARM: socfpga: do not add board directory to header search path

The compiler option "-Iboard/$(VENDOR)/$(BOARD)" just exists here
for iocsr_config.c to be able to include iocsr_config.h.

Use "..." instead of <...> to include a header in the same directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agodm: sf: Update default name of spi flash in structure udevice
Haikun.Wang@freescale.com [Wed, 6 May 2015 02:37:43 +0000 (10:37 +0800)]
dm: sf: Update default name of spi flash in structure udevice

Default name of spi flash like this "0:0", update it to "spi_flash@0:0".

Signed-off-by: Haikun Wang <haikun.wang@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agodm: usb: exynos: Drop legacy USB code
Simon Glass [Wed, 25 Mar 2015 18:23:07 +0000 (12:23 -0600)]
dm: usb: exynos: Drop legacy USB code

Drop the code that doesn't use driver model for USB.

Signed-off-by: Simon Glass <sjg@chromium.org>
9 years agosandbox: Enable time unit test command
Simon Glass [Sat, 2 May 2015 15:25:03 +0000 (09:25 -0600)]
sandbox: Enable time unit test command

Enable this command for sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
9 years agotest: Add a simple time test
Simon Glass [Sat, 2 May 2015 15:25:02 +0000 (09:25 -0600)]
test: Add a simple time test

Sometimes the time functions are incorrect due to bad time support on a
board. Add a unit test which tries to detect this.

Signed-off-by: Simon Glass <sjg@chromium.org>
9 years agosandbox: Don't try distro_bootcmd by default
Sjoerd Simons [Thu, 30 Apr 2015 20:16:09 +0000 (22:16 +0200)]
sandbox: Don't try distro_bootcmd by default

For the distro_bootcmds to succeed on the sandbox a bit of setup is
required (e.g. network configured or host image bound), so running them
by default isn't that useful.

Add a -b/--boot command to the sandbox binary, which triggers the
distro_bootcmds to run after the other command-line commands.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agousb: ohci: Don't log an error on interrupt packet timeout
Hans de Goede [Tue, 5 May 2015 21:56:14 +0000 (23:56 +0200)]
usb: ohci: Don't log an error on interrupt packet timeout

Interrupts transfers timing out is normal, so do not log an error for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agousb: ohci: Add proper cache flushing / invalidating for non cache coherent cpus
Hans de Goede [Tue, 5 May 2015 21:56:13 +0000 (23:56 +0200)]
usb: ohci: Add proper cache flushing / invalidating for non cache coherent cpus

Add proper cache flushing / invalidating for non cache coherent cpus, for now
only enable this for new (driver-model) usb code to avoid regressions.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
9 years agousb: ohci: Fix ctrl in messages with a data-len of 0
Hans de Goede [Tue, 5 May 2015 21:56:12 +0000 (23:56 +0200)]
usb: ohci: Fix ctrl in messages with a data-len of 0

Fix taken from the Linux kernel ohci driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agousb: ohci: Move static func and var declarations from ohci.h to ohci-hcd.c
Hans de Goede [Tue, 5 May 2015 21:56:11 +0000 (23:56 +0200)]
usb: ohci: Move static func and var declarations from ohci.h to ohci-hcd.c

Non static function and variable declarations do not belong in a .h file.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agousb: ohci: Remove unnecessary phcca variable
Hans de Goede [Tue, 5 May 2015 21:56:10 +0000 (23:56 +0200)]
usb: ohci: Remove unnecessary phcca variable

This is a preparation patch for adding driver-model support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agousb: ohci: Move the td array struct to inside the ohci_dev struct
Hans de Goede [Tue, 5 May 2015 21:56:09 +0000 (23:56 +0200)]
usb: ohci: Move the td array struct to inside the ohci_dev struct

This is a preparation patch for adding driver-model support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agousb: ohci: Move the ohci_dev struct to inside the main ohci struct
Hans de Goede [Tue, 5 May 2015 21:56:08 +0000 (23:56 +0200)]
usb: ohci: Move the ohci_dev struct to inside the main ohci struct

This is a preparation patch for adding driver-model support.

Note we do keep ohci_dev as a separate struct so that we can later add
support for interrupt-queues which requires allocating a separate ohci_dev
per interrupt-queue.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agousb: ohci: Pass around a pointer to ohci_t rather then accessing global vars
Hans de Goede [Tue, 5 May 2015 21:56:07 +0000 (23:56 +0200)]
usb: ohci: Pass around a pointer to ohci_t rather then accessing global vars

This is a preparation patch for adding driver-model support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
9 years agousb: ohci: Remove unused devgone global variable
Hans de Goede [Tue, 5 May 2015 21:56:06 +0000 (23:56 +0200)]
usb: ohci: Remove unused devgone global variable

devgone is never assigned a value, so the one comparisson reading it will
never be true, and devgone can be completely removed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>