Jeff Law [Wed, 14 Sep 1994 00:29:11 +0000 (00:29 +0000)]
* som.c (som_object_setup): Handle exec_entry and exec_flags being
switched in executables created by the OSF1 linker.
(som_write_fixups): Handle R_EXIT just like the R_{F,L,R}SEL
fixups. Support R_ALT_ENTRY (handle just like R_EXIT).
Rob Savoye [Wed, 14 Sep 1994 00:26:51 +0000 (00:26 +0000)]
* w89k-rom.c op50-rom.c monitor.c config/pa/hppapro.mt: New files
to add a generic ROM monitor interface, and support file for the
WinBond W89K and the Oki OP50N PA based target boards.
Rob Savoye [Wed, 14 Sep 1994 00:21:23 +0000 (00:21 +0000)]
Add support for the w89k and op50n PA target board code.
Rob Savoye [Wed, 14 Sep 1994 00:19:26 +0000 (00:19 +0000)]
Oop, make sure Sanitize doesn't nuke new files.
Rob Savoye [Wed, 14 Sep 1994 00:14:53 +0000 (00:14 +0000)]
A generic ROM monitor interface abnd support for the WinBond w89k board
and the Oki op59n board.
Steve Chamberlain [Wed, 14 Sep 1994 00:10:42 +0000 (00:10 +0000)]
Tue Sep 13 16:04:07 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* cofflink.c (coff_link_input_bfd): syment_base is unsigned
so can't compare -ve numbers with it.
Mon Sep 12 20:31:17 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* configure.in (shcoff_vec): Use cofflink.o now.
* coff-sh.c: Rewritten to use new fast coff backend.
Steve Chamberlain [Wed, 14 Sep 1994 00:01:45 +0000 (00:01 +0000)]
Tue Sep 13 16:45:08 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* config/obj-coff.c (do_relocs_for): If TC_KEEP_FX_OFFSET
is defined, put the tx_offset into the r_offset.
* config/tc-sh.c (line_comment_chars): Add #
(tc_reloc_mangle): Deleted.
* config/tc-sh.h (TC_KEEP_FX_OFFSET): Define.
(TC_RELOC_MANGLE): Delete.
Steve Chamberlain [Tue, 13 Sep 1994 23:53:52 +0000 (23:53 +0000)]
* config/obj-coff.c (do_relocs_for): If TC_KEEP_FX_OFFSET
is defined, put the tx_offset into the r_offset.
* config/tc-sh.c (line_comment_chars): Add #
(tc_reloc_mangle): Deleted.
* config/tc-sh.h (TC_KEEP_FX_OFFSET): Define.
(TC_RELOC_MANGLE): Delete.
Ken Raeburn [Tue, 13 Sep 1994 23:07:48 +0000 (23:07 +0000)]
Use EXIT_SUCCESS and EXIT_FAILURE in all exit calls.
Use exit rather than returning from main, for consistency on VMS.
Call as_fatal instead of as_bad or as_warn followed by exit.
Ken Raeburn [Tue, 13 Sep 1994 22:27:20 +0000 (22:27 +0000)]
* Makefile.in (*_FOR_TARGET, INSTALL_XFORM, install, uninstall): Rewrite
handling of program_transform_name.
* configure.in: Test for "unlink" and "delete", define USE_DELETE_FOR_UNLINK if
only the latter is found. Not expected to be triggered on UNIX/POSIX systems.
* acconfig.h (USE_DELETE_FOR_UNLINK): Undef here, provide comments.
Update for autoconf 1.118:
* gdbinit.in: New file, created from old .gdbinit.
* .gdbinit: Deleted.
* aclocal.m4 (GAS_GDBINIT): Deleted.
* configure.in: Don't use it. Instead, generate .gdbinit from gdbinit.in.
Don't substitute cpu_type, obj_format, emulation, atof. Switched order of
AC_LINK_FILES arguments. Use AC_PREREQ to ensure that older versions of
autoconf aren't used.
* Makefile.in: Added @configure_input@ line.
(configure): Deleted rule.
[regenerated conf.in, configure]
Ian Lance Taylor [Tue, 13 Sep 1994 20:42:47 +0000 (20:42 +0000)]
* ldlang.c (load_symbols): Check for archive before object. Use
bfd_check_format_matches, and, if ambiguous, print a list of
matching formats. If file format is not recognized, treat file as
a linker script.
* ldgram.y (yyerror): If assuming an object file is a script,
mention that. Tweak the format of the error messages.
* ldlex.l (lex_warn_invalid): If assuming an object is a script,
guess that this is not actually a script, and just report that the
file format was not recognized.
* ld.texinfo (Options): Admit that -( may be used more than once.
Add note that unrecognized object files are now treated as linker
scripts.
* ldfile.c (ldfile_input_filename): Make const.
(ldfile_assumed_script): New variable.
(try_open): Change arguments types to const.
(ldfile_find_command_file): Likewise.
(ldfile_open_command_file): Likewise. Also, set lineno to 1.
* ldfile.h: Update declarations for ldfile.c changes.
* ldlex.l: Include <ctype.h>.
(file_name_stack): Change to be const char *.
(lineno_stack): New static variable.
(<<EOF>>): Set lineno as well as ldfile_input_filename.
(lex_push_file): Make name argument const. Initialize
lineno_stack entry.
(lex_redirect): Initialize lineno_stack entry.
(lex_warn_invalid): Handle non printable characters nicely.
* ldlex.h (lex_push_file): Declare second argument as const.
* ldgram.y (ifile_p1): Recognize GROUP.
* ldlex.l: Recognize GROUP.
* ld.texinfo (Option Commands): Document GROUP.
Ian Lance Taylor [Tue, 13 Sep 1994 20:25:46 +0000 (20:25 +0000)]
* aoutx.h (NAME(aout,final_link)): Don't assume that all the input
files are a.out.
J.T. Conklin [Tue, 13 Sep 1994 18:39:47 +0000 (18:39 +0000)]
* configure.host (sparc-*-netbsd): use sparcnbsd.
(ns32k-*-netbsd): use ns32knbsd.
* hosts/{nbsd,i386nbsd,ns32knbsd,sparcnbsd}.h: New files, NetBSD
host support.
* sparcnetbsd.c: New file, adds support for NetBSD/sparc.
* config/sparc-nbsd.mt: Likewise.
* netbsd.h: New file, definitions common to all netbsd ports.
* i386netbsd.c: Use it.
* ns32knetbsd.c: Use it.
* Makefile.in, configure.in, targets.c, config/i386-nbsd.mt,
config/ns32k-nbsd.mt: canonicalize netbsd targets to conform to
file/variable naming conventions.
* i386netbsd.c: New file, renamed from netbsd386.c.
* ns32knetbsd.c: New file, renamed from netbsd532.c.
Ian Lance Taylor [Tue, 13 Sep 1994 18:19:24 +0000 (18:19 +0000)]
* Makefile.in (version.o): Depend upon Makefile, so that version.o
gets rebuilt when make variable VERSION is changed.
Ian Lance Taylor [Tue, 13 Sep 1994 18:18:01 +0000 (18:18 +0000)]
* objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
Ian Lance Taylor [Tue, 13 Sep 1994 17:06:26 +0000 (17:06 +0000)]
* config/obj-coff.c (fixup_segment): After handling the difference
of two symbols from the same segment, set fx_subsy to NULL, to
satisfy existing TC_COUNT_RELOC macros.
Stu Grossman [Tue, 13 Sep 1994 16:24:01 +0000 (16:24 +0000)]
* gdbtk.c (gdbtk_flush gdbtk_fputs): Buffer up output to make
disassembly more efficient.
* (breakpoint_notify): Include pc in gdbtk_tcl_breakpoint
callback.
* (gdb_loc): Include pc in return value. Also, return function
name if arg was specified.
* (gdb_cmd_stub): Call gdb_flush to drain internal GDB buffers
after command completes.
* (gdbtk_init): Improve error handling.
* gdbtk.tcl: Add lots of comments. Clean up code.
* (gdbtk_tcl_fputs): Make output window redirectable.
* Add assembly window, and breapoint support.
* Make button 1 in margin toggle breakpoints.
* Use stippling to indicate breakpoint disabling.
Jeffrey Osier [Tue, 13 Sep 1994 09:52:15 +0000 (09:52 +0000)]
gasp.texi: a few edits thanks to crash
Ken Raeburn [Tue, 13 Sep 1994 05:54:13 +0000 (05:54 +0000)]
Generate .gdbinit file:
* aclocal.m4 (GAS_GDBINIT): New macro.
* configure.in: Use it.
* configure: Regenerated.
(using autoconf-1.117)
Jeff Law [Tue, 13 Sep 1994 04:22:49 +0000 (04:22 +0000)]
* gas/hppa/reloc/r_no_relocbug.s: New test.
* gas/hppa/reloc/reloc.exp: Run it.
* gas/hppa/reloc/reloc.exp (do_function_reloc_bug): Update
expected output.
Jeff Law [Tue, 13 Sep 1994 04:06:07 +0000 (04:06 +0000)]
* som.c (som_reloc_skip): Correct off-by-one error for 4-byte
R_NO_RELOCATION fixups.
(bfd_section_from_som_symbol): Return the absolute section if the
symbol isn't contained in any section in the output file.
(som_slurp_symbol_table): ST_PRI_PROG and ST_SEC_PROG symbols are
not function symbols (they are magic code labels which *can* be the
targets of cross space branches). $START$ is not a section symbol.
Ken Raeburn [Tue, 13 Sep 1994 02:20:55 +0000 (02:20 +0000)]
PIC enhancements just checked in (based on work of Paul Kranenburg and Eric
Youngdale).
New debugging code for .gdbinit. "this file generated..." msg in config.h.
Ken Raeburn [Tue, 13 Sep 1994 02:15:23 +0000 (02:15 +0000)]
* tc-i386.c (TC_RELOC): New macro.
(struct _i386_insn): New field disp_reloc.
(GOT_symbol): New variable.
(operand_special_chars): Added square-brackets and at-sign.
(reloc) [BFD_ASSEMBLER]: Added new argument OTHER; if it is not NO_RELOC, just
return it.
(reloc) [! BFD_ASSEMBLER]: Add third argument to dummy macro.
(BFD_RELOC_386_PLT32, _GOT32, _GOTOFF) [! BFD_ASSEMBLER]: More dummy macros.
(tc_i386_fix_adjustable): New function. Returns zero if symbol in fixup is not
local, to prevent relocations against externals from being dropped.
(md_assemble): Initialize disp_reloc field to NO_RELOC. Pass disp_reloc field
to reloc() function, and use TC_RELOC to generate value to pass to fix_new_exp.
(md_assemble): Change 32-bit reloc against GOT_symbol into a GOTPC reloc.
(i386_operand): Initialize disp_reloc field to NO_RELOC. Handle @GOTOFF, @PLT,
@GOT operands. For GOTOFF relocations with local symbols, force generation of
the section symbol.
(md_estimate_size_before_relax): If GOT_symbol exists, decide we're generating
PIC code, and convert relocations against undefined symbols from PCREL to
PLT32.
(md_apply_fix_1) [OBJ_ELF]: Fix up values for dynamic-linking relocs.
(md_undefined_symbol): Notice GLOBAL_OFFSET_TABLE_NAME and set and return
GOT_symbol if it matches.
(F, MAP): Move macro definitions outside function.
(tc_gen_reloc): Only switch on size and pcrel if code wasn't already supplied
as PLT32. GOT32, GOTOFF, or GOTPC. Convert BFD_RELOC_32 using GOT_symbol into
GOTPC.
* tc-i386.h (TC_RELOC, tc_fix_adjustable, TC_RELOC_GLOBAL_OFFSET_TABLE,
TC_RELOC_RTSYM_LOC_FIXUP): New macros.
(NEED_FX_R_TYPE): Define.
(LOCAL_LABEL): Accept ".X" prefix too.
(GLOBAL_OFFSET_TABLE_NAME): Default to "_GLOBAL_OFFSET_TABLE_".
Ken Raeburn [Tue, 13 Sep 1994 02:11:25 +0000 (02:11 +0000)]
* write.c (fixup_segment): Test TC_RELOC_RTSYM_LOC_FIXUP on fixup before
processing same-section pcrel relocations.
(TC_RELOC_RTSYM_LOC_FIXUP): Default to 1.
Ken Raeburn [Tue, 13 Sep 1994 02:10:43 +0000 (02:10 +0000)]
* expr.c (make_expr_symbol): If operator is O_symbol and X_add_number is zero,
just return the symbol. If operator is O_constant, resolve the symbol's value
before returning.
(operand): Permit use of "[]" for grouping.
(clean_up_expression): For difference of two symbols in the same frag, add the
difference of their offsets into X_add_number.
(expr): Reduce difference of two symbols in same frag to their difference.
Ken Raeburn [Tue, 13 Sep 1994 01:51:26 +0000 (01:51 +0000)]
* Makefile.in (config-stamp): Add a "this file generated by make" message to
config.h.
Ken Raeburn [Tue, 13 Sep 1994 01:50:02 +0000 (01:50 +0000)]
* .gdbinit (pe, ps): Define new commands.
* symbols.c (indent_level): New static variable.
(indent, print_expr_1, print_symbol_value_1, print_symbol_value, print_expr):
New functions.
Stan Shebs [Tue, 13 Sep 1994 00:50:38 +0000 (00:50 +0000)]
Merge supposedly (but not really) GM-specific bits into general MPW config
Stan Shebs [Tue, 13 Sep 1994 00:20:31 +0000 (00:20 +0000)]
Merge in former supposed GM-specific bits
Stan Shebs [Tue, 13 Sep 1994 00:18:55 +0000 (00:18 +0000)]
Remove supposedly (but not really) GM-specific bits
Stan Shebs [Tue, 13 Sep 1994 00:14:18 +0000 (00:14 +0000)]
* mpw-make.in (ALL_CFLAGS): Add definition of HAVE_STDARG_H,
include of ::libiberty:.
(config.h): Ifdef contents on GAS_VERSION.
config/ho-mpw.h: Remove redefinitions of true and false.
Stan Shebs [Mon, 12 Sep 1994 23:54:12 +0000 (23:54 +0000)]
* mpw-make.in (ctor.c): Remove references.
* hosts/mpw.h [BFD_TRUE_FALSE]: Remove macro redefinitions of true
and false.
Stan Shebs [Mon, 12 Sep 1994 23:49:00 +0000 (23:49 +0000)]
* mpw-configure (host_canonical): Set.
(mpw-xconfig.in): No longer use.
(target_cpu): Always add to makefiles.
(ARCHDEFS, EMUL): Add to makefile only if nonempty.
(TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
(mpw-mh-mpw): Look for in srcdir and srcroot.
Use sed instead of mpw-edit-prefix to edit prefix definitions.
Ian Lance Taylor [Mon, 12 Sep 1994 22:36:08 +0000 (22:36 +0000)]
* config/obj-elf.c (obj_elf_type): Rewrite to accept syntax
reportedly to be used on Irix 6.
Ian Lance Taylor [Mon, 12 Sep 1994 22:16:27 +0000 (22:16 +0000)]
* elfcode.h (swap_out_syms): Set the type of an undefined symbol
to STT_FUNC if the BSF_FUNCTION flag is set.
Ian Lance Taylor [Mon, 12 Sep 1994 22:11:18 +0000 (22:11 +0000)]
* config/tc-mips.c (md_pseudo_table): Handle .globl and .global.
(s_mips_globl): New static function; needed for Irix 5 support.
* ecoff.c (ecoff_build_symbols): If BSF_FUNCTION is set for an
external symbol with no type, set the type to st_Proc rather than
st_Global. Don't set the index of an external st_Proc or
st_StaticProc symbol unless it is also a local symbol.
Ian Lance Taylor [Mon, 12 Sep 1994 21:52:43 +0000 (21:52 +0000)]
* read.c (read_a_source_file): The second argument to as_where is
unsigned int *, not int *.
Ian Lance Taylor [Mon, 12 Sep 1994 21:06:35 +0000 (21:06 +0000)]
* config/m68klynx.mh: New file.
Ian Lance Taylor [Mon, 12 Sep 1994 21:01:19 +0000 (21:01 +0000)]
* cofflink.c (coff_link_input_bfd): If r_symndx is -1, don't
change it.
(_bfd_coff_generic_relocate_section): If r_symndx is -1, it is an
absolute reloc. Don't dump core using r_symndx as an array index.
* cf-m68klynx.c (coff_bfd_link_add_symbols): Define.
(lynx_link_add_symbols): New static function (copy of function in
coff-i386.c).
(coff_m68k_lynxrtype_to_howto): sym argument may be NULL.
* coff-i386.c (coff_i386_rtype_to_howto): Likewise.
* coff-a29k.c (coff_a29k_relocate_section): Handle an r_symndx
value of -1, meaning an absolute reloc.
Ian Lance Taylor [Mon, 12 Sep 1994 15:47:52 +0000 (15:47 +0000)]
* ctor.c: Remove; obsolete.
* Makefile.in: Rebuild dependencies.
(BFD_LIBS): Remove ctor.o.
(CFILES): Remove ctor.c.
* libbfd.h: Rebuild.
Jeff Law [Mon, 12 Sep 1994 08:07:13 +0000 (08:07 +0000)]
* elf32-hppa.c (elf32_hppa_relocate_section): If there was a link
error of some sort (for example, undefined symbols), then do not
apply any relocs, just notify the user of the errors.
(elf32_hppa_backend_begin_write_processing): Do not build a symbol
extension section for an executable (it's useless).
(elf32_hppa_link_output_symbol_hook): Do nothing if there was a
link error of some sort (for example, undefined symbols).
(elf32_hppa_read_symext_info): Kludge. Turn off SEC_HAS_CONTENTS
for all the input symbol extension sections to keep the generic
BFD code happy. Temporarily turn it on to read the contents of
the symbol extension section.
Jeff Law [Mon, 12 Sep 1994 07:51:14 +0000 (07:51 +0000)]
* emultempl/hppaelf.em: Add newlines to the error messages.
Jeff Law [Mon, 12 Sep 1994 04:36:54 +0000 (04:36 +0000)]
* config/pa/tm-hppa.h (REGISTER_NAMES): Use r26-r23 for arg0-arg3.
Jeff Law [Mon, 12 Sep 1994 04:33:24 +0000 (04:33 +0000)]
* hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
Jeff Law [Mon, 12 Sep 1994 04:06:07 +0000 (04:06 +0000)]
Revert last change (never should have been checked in to begin with).
Jeff Law [Mon, 12 Sep 1994 04:04:09 +0000 (04:04 +0000)]
* config/hppaosf.mh (RANLIB): Do not set.
* config/hppabsd.mh (RANLIB): Likewise.
Ian Lance Taylor [Mon, 12 Sep 1994 02:57:23 +0000 (02:57 +0000)]
Get the new COFF linker code working for i386-lynx.
* cf-i386lynx.c: Remove #if 0 code.
(i386_lynxos_coff_object_p): Remove unused function.
(coff_bfd_link_add_symbols): Define.
(lynx_link_add_symbols): New static function.
* coffcode.h (coff_bfd_link_hash_table_create): If
coff_relocate_section is defined, only define this if not already
defined.
(coff_bfd_link_add_symbols, coff_bfd_final_link): Likewise.
* linker.c (_bfd_generic_final_link): Handle
bfd_indirect_link_order explicitly, rather than via
_bfd_default_link_order.
(set_symbol_from_hash): New static function, broken out of
_bfd_generic_link_write_global_symbol.
(_bfd_generic_link_write_global_symbol): Symbol setting code moved
to set_symbol_from_hash; call it.
(default_indirect_link_order): Add generic_linker argument.
Change all callers. If false, set the generic symbols based on
the hash table entries.
Ian Lance Taylor [Mon, 12 Sep 1994 02:42:49 +0000 (02:42 +0000)]
* config/i386lynx.mh: New file.
* scripttempl/i386lynx.sc: Don't put .ctors and .dtors in .text
unless CONSTRUCTING.
Peter Schauer [Sun, 11 Sep 1994 11:43:40 +0000 (11:43 +0000)]
* irix5-nat.c, osfsolib.c, solib.c (solib_add): Simplify last
change by replacing `symbols_added' with `so_last'.
* mdebugread.c (parse_external, parse_partial_symbols): Ignore
global common symbols, they will be resolved by the runtime loader.
* mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
Handle scSCommon like scCommon symbols.
Ian Lance Taylor [Sat, 10 Sep 1994 20:04:17 +0000 (20:04 +0000)]
* emulparams/elf32mipb.sh (TEMPLATE_NAME): Define as elf32.
(GENERATE_SHLIB_SCRIPT): Define as yes.
(DYNAMIC_LINK): Define as false.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse):
Initialize config.dynamic_link to DYNAMIC_LINK if it is defined.
(gld${EMULATION_NAME}_place_orphan): Reset stat_ptr at end.
* Makefile.in (eelf32mipb.c): Depend upon elf32.em rather than
generic.em.
Peter Schauer [Sat, 10 Sep 1994 10:10:05 +0000 (10:10 +0000)]
* Update copyright message to include 1993, 1994.
Peter Schauer [Sat, 10 Sep 1994 08:50:10 +0000 (08:50 +0000)]
* corelow.c (add_solib_stub): Copy to_sections changes from
core_ops to current_target after adding the shared libraries.
* partial-stab.h (N_EXCL), dbxread.c (add_old_header_file,
find_corresponding_bincl_psymtab): Change `repeated header not seen'
error to a complaint, simplify complaint.
* procfs.c (signalname, errnoname): Make `name' const.
* symfile.c (reread_symbols): Use filename from old BFD to
reopen the objfile.
* values.c (record_latest_value): Don't record value in the
history chain until we are sure there won't be an error.
J.T. Conklin [Fri, 9 Sep 1994 23:22:41 +0000 (23:22 +0000)]
* nlm/Makefile.in: remove MMALLOC, READLINE, TERMCAP, and other cruft.
Rob Savoye [Fri, 9 Sep 1994 23:00:02 +0000 (23:00 +0000)]
Add XDEPFILE = ser-tcp.o
J.T. Conklin [Fri, 9 Sep 1994 22:55:36 +0000 (22:55 +0000)]
* config/i386/gdbserve.mt: New file, defs for i386 nlm stub.
Rob Savoye [Fri, 9 Sep 1994 22:44:13 +0000 (22:44 +0000)]
GDB support for HP-PRO.
Ian Lance Taylor [Fri, 9 Sep 1994 20:38:37 +0000 (20:38 +0000)]
* coffgen.c (coff_get_symtab): Reindented. Removed commented out
call to bfd_constructor_entry.
Ken Raeburn [Fri, 9 Sep 1994 18:51:10 +0000 (18:51 +0000)]
keep arm files
Ken Raeburn [Fri, 9 Sep 1994 18:35:11 +0000 (18:35 +0000)]
keep arm files
Ken Raeburn [Fri, 9 Sep 1994 18:34:25 +0000 (18:34 +0000)]
forgot an entry for makefile dependency changes
Ken Raeburn [Fri, 9 Sep 1994 18:34:24 +0000 (18:34 +0000)]
keep arm dir
Ian Lance Taylor [Fri, 9 Sep 1994 15:54:45 +0000 (15:54 +0000)]
Convert m68k COFF to use new COFF backend linker.
* coff-m68k.c (coff_relocate_section): Define.
* cf-m68klynx.c (coff_rtype_to_howto): Define.
(coff_m68k_lynx_rtype_to_howto): New static function.
* configure.in (m68kcoff_vec): Build cofflink.o.
(m68kcoffun_vec, m68klynx_coff_vec): Likewise.
Kung Hsu [Fri, 9 Sep 1994 01:05:28 +0000 (01:05 +0000)]
Modified Files:
ChangeLog read.h read.c ecoff.h ecoff.c
* read.h : ditto.
* read.c (read_a_source_file): if no file when inst is read, set
generate_asm_lineno to true.
* ecoff.h : change name to generate_asm_lineno and add function
ecoff_no_current_file.
* ecoff.c : change name to generate_asm_lineno.
* ecoff.c (ecoff_generate_asm_lineno) : new function, to generate
ecoff style line for asm file.
Kung Hsu [Fri, 9 Sep 1994 01:02:48 +0000 (01:02 +0000)]
Modified Files:
obj-ecoff.h obj-elf.h
* config/obj-ecoff.h : Change names to OBJ_GENERATE_ASM_LINENO,
and generate_asm_lineno.
* config/obj-elf.h : ditto.
Steve Chamberlain [Fri, 9 Sep 1994 00:44:01 +0000 (00:44 +0000)]
* config/i386/xm-go32.h (GDBINIT_FILENAME): Set to gdb.ini.
(more work here to come)
Steve Chamberlain [Fri, 9 Sep 1994 00:43:50 +0000 (00:43 +0000)]
* config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function
fields.
Steve Chamberlain [Fri, 9 Sep 1994 00:43:30 +0000 (00:43 +0000)]
* config/h8500/tm-h8500.h (target_write_pc, TARGET_WRITE_PC):
Handle extra arg.
Steve Chamberlain [Fri, 9 Sep 1994 00:35:09 +0000 (00:35 +0000)]
Thu Sep 8 17:14:43 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* remote.c (fromhex): Make error more explicit.
(read_frame): Don't print bad checksum information unless
remote_debugging. Don't use repeat count unless it's > 0.
* remote-e7000.c (expect): When echoing, ignore multiple newlines.
(e7000_insert_breakpoint, e7000_remove_breakpoint, target_ops): Optionally
cope with BC style breakpoints.
(e7000_command): After command send directly to the E7000 mark
registers as changed.
(why_stop, e7000_wait: Understand BC style stop condition.
* sh-tdep.c (sh_skip_prologue): Understand more complicated
sequences. (frame_find_saved_regs): Likewise.
* config/h8500/tm-h8500.h (target_write_pc, TARGET_WRITE_PC):
Handle extra arg.
* config/i386/xm-go32.h (GDBINIT_FILENAME): Set to gdb.ini.
(more work here to come)
* config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function
fields.
Ian Lance Taylor [Thu, 8 Sep 1994 23:46:00 +0000 (23:46 +0000)]
* config/obj-coff.c (size_section): Do an fprintf to stderr rather
than a printf.
(fixup_segment): Use as_bad_where rather than as_bad.
Steve Chamberlain [Thu, 8 Sep 1994 23:36:17 +0000 (23:36 +0000)]
* scripttempl/h8500b.sc: Put rdata stuff into own segment.
Steve Chamberlain [Thu, 8 Sep 1994 23:27:56 +0000 (23:27 +0000)]
* coff-h8300.c (h8300_reloc16_extra_cases, case RELBYTE): Flag overflows
correctly.
J.T. Conklin [Thu, 8 Sep 1994 23:19:02 +0000 (23:19 +0000)]
* sparclite/Makefile.in: Assorted stuff needed for eload.
* sparclite/eload.c: Merge in command line argument parsing and
error message handling improvements orignally made to aload.c.
Ian Lance Taylor [Thu, 8 Sep 1994 17:26:27 +0000 (17:26 +0000)]
* emulparams/elf32ppc.sh (OTHER_READWRITE_SECTIONS): Don't define;
.got section is now explicitly handled in elf.sc.
Jeff Law [Thu, 8 Sep 1994 06:02:58 +0000 (06:02 +0000)]
* gdb.base/commands.exp: New tests for if/while commands.
Jeff Law [Thu, 8 Sep 1994 05:32:34 +0000 (05:32 +0000)]
* defs.h (enum misc_command_type, command_control_type): Enums
for describing the command and control types.
(struct command_line): Add new fields to keep track of the command
type and body associated with the command.
* top.c: Include value.h. Delete whitespace at the end of lines.
(build_command_line, get_command_line): New functions.
(execute_control_command, while_command, if_command): Likewise.
(realloc_body_list, read_next_line): Likewise.
(recurse_read_control_structure): Likewise.
(execute_user_command): Call execute_control_command.
(read_command_lines): Simplify by calling read_next_line, call
read_control_structure for "if" and "while" commands.
(free_command_lines): Free new fields in the command structure.
(define_command): Reset control_level to zero.
(init_main): Install command handlers for "if" and "while" commands.
Steve Chamberlain [Thu, 8 Sep 1994 00:52:23 +0000 (00:52 +0000)]
* config/tc-{h8300,sh}.[ch] (tc_coff_symbol_emit): Function doing nothing
becomes macro doing nothing.
Steve Chamberlain [Thu, 8 Sep 1994 00:38:17 +0000 (00:38 +0000)]
Wed Sep 7 17:21:12 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* config/tc-{h8300,sh}.[ch] (tc_coff_symbol_emit): Function doing nothing
becomes macro doing nothing.
Ken Raeburn [Thu, 8 Sep 1994 00:15:49 +0000 (00:15 +0000)]
fix config.status, Makefile dependencies
Ken Raeburn [Thu, 8 Sep 1994 00:00:08 +0000 (00:00 +0000)]
tc_gen_reloc, i386-linux, brokensed changes
Ken Raeburn [Wed, 7 Sep 1994 23:58:32 +0000 (23:58 +0000)]
(tc_gen_reloc): Use bfd_get_reloc_code_name in error message.
Ken Raeburn [Wed, 7 Sep 1994 23:52:59 +0000 (23:52 +0000)]
Remove 'brokensed' hack, autoconf should make it unnecessary now.
Ken Raeburn [Wed, 7 Sep 1994 23:52:31 +0000 (23:52 +0000)]
Don't set bfd_gas for i386-linux a.out configurations.
Ian Lance Taylor [Wed, 7 Sep 1994 23:41:58 +0000 (23:41 +0000)]
* libelf.h (struct elf_backend_data): Change second argument of
elf_backend_final_write_processing hook to boolean.
(struct elf_obj_tdata): Add linker field.
* elfcode.h (NAME(bfd_elf,write_object_contents)): Pass value of
tdata linker field to final_write_processing, rather than NULL.
(elf_bfd_final_link): Don't call final_write_processing hook. Set
tdata linker field to true.
* elf32-mips.c (mips_elf_final_write_processing): Change type of
second argument to boolean.
* elf32-hppa.c (elf32_hppa_backend_final_write_processing):
Likewise.
Ken Raeburn [Wed, 7 Sep 1994 23:34:23 +0000 (23:34 +0000)]
Update for autoconf beta 1.112:
* aclocal.m4 (GAS_CHECK_DECL_NEEDED, GAS_WORKING_ASSERT): New macros.
* configure.in: Use them. Use AC_ARG_PROGRAM (now provided by autoconf)
instead of my hacked-up AC_PROGRAM_TRANSFORM_NAME. Move test for CROSS_COMPILE
just before AC_FUNC_ALLOCA, and emit a message to try to ease confusion about
autoconf's "cross-compiling" message.
* acconfig.h (NEED_DECLARATION_MALLOC, NEED_DECLARATION_FREE,
NEED_DECLARATION_ERRNO): Renamed from NEED_*_DECLARATION.
* configure, conf.in: Regenerated.
Ian Lance Taylor [Wed, 7 Sep 1994 23:16:23 +0000 (23:16 +0000)]
* coff-go32.c (RTYPE2HOWTO): Fully parenthesize arguments.
* coff-i960.c (RTYPE2HOWTO): Likewise.
* coff-m88k.c (RTYPE2HOWTO): Likewise.
* coff-we32k.c (RTYPE2HOWTO): Likewise.
Make i386 COFF use new COFF backend linker.
* coff-i386.c (RTYPE2HOWTO): Fully parenthesize arguments.
(coff_relocate_section): Define.
(coff_i386_rtype_to_howto): New function.
* configure.in (i386coff_vec): Use cofflink.o.
(i386lynx_coff_vec): Likewise.
* coffcode.h (bfd_coff_backend_data): Add new field
_bfd_coff_rtype_to_howto.
(bfd_coff_rtype_to_howto): Define.
(coff_rtype_to_howto): Define to use RTYPE2HOWTO, if not already
defined.
(bfd_coff_std_swap_table): Initialize new field.
* cofflink.c (_bfd_coff_final_link): Allocate section_count + 1
section_info structures, since the target_index is 1 based.
(coff_link_input_bfd): Set *secpp to bfd_com_section_ptr for a
common symbol. Adjust rel_hash by the output reloc count.
(_bfd_coff_generic_relocate_section): New function.
* libcoff-in.h (_bfd_coff_generic_relocate_section): Declare.
* libcoff.h: Rebuild.
* coff-alpha.c (alpha_ecoff_backend_data): Initialize new field.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
Ian Lance Taylor [Wed, 7 Sep 1994 16:53:27 +0000 (16:53 +0000)]
* configure.in: Check ${host} and ${target} rather than
${host_canon} and ${target_canon}.
* configure: Likewise.
Per Bothner [Wed, 7 Sep 1994 06:23:05 +0000 (06:23 +0000)]
* config.sub: Merge nextstep cleanup from FSF.
Jeff Law [Wed, 7 Sep 1994 05:39:13 +0000 (05:39 +0000)]
* som.c (som_bfd_derive_misc_symbol_info): Treat undefined code
symbols and undefined symbols which no type in the same manner
if the associated BFD symbol has BSF_FUNCTION set. For a defined
symbol which no type, select a SOM type based on the flags of the
section containing the symbol.
(som_slurp_symbol_type): Set BSF_FUNCTION for undefined ST_STUB
or ST_CODE symbols (importing a non-function code symbol is
meaningless in SOM).
(som_set_reloc_info): Don't set "offset" to the section's vma; it
should always start at zero.
Ian Lance Taylor [Wed, 7 Sep 1994 03:57:59 +0000 (03:57 +0000)]
x
Ian Lance Taylor [Wed, 7 Sep 1994 03:57:09 +0000 (03:57 +0000)]
* scripttempl/m68kcoff.sc: Put .bss in data segment.
* scripttempl/h8300.sc: Change .stab and .stabstr to use a VMA of
0, and to only be marked as NOLOAD if relocating.
* scripttempl/h8500.sc, scripttempl/h8500b.sc: Likewise.
* scripttempl/h8500c.sc, scripttempl/h8500m.sc: Likewise.
* scripttempl/h8500s.sc, scripttempl/i386coff.sc: Likewise.
* scripttempl/i386go32.sc, scripttempl/i386lynx.sc: Likewise.
* scripttempl/m68kcoff.sc, scripttempl/m68klynx.sc: Likewise.
* scripttempl/sh.sc, scripttempl/sparccoff.sc: Likewise.
* scripttempl/sparclynx.sc: Likewise.
Stan Shebs [Wed, 7 Sep 1994 00:23:16 +0000 (00:23 +0000)]
* c-typeprint.c (c_type_print_varspec_prefix,
c_type_print_varspec_suffix): Add cases for Fortran type codes.
* eval.c (evaluate_subexp): For OP_ARRAY expressions in Fortran,
call f77_value_literal_string instead.
* f_exp.y: Include <string.h>, move include of parser-defs.h.
(parse_number): Translate 'd' floats to 'e' so atof() works.
(yylex): Remove unused variables.
* f-lang.c: Include <string.h>.
(get_bf_for_fcn): Remove unused variable.
* f-typeprint.c (f_type_print_varspec_prefix,
f_type_print_varspec_suffix): Remove unused
variables, add cases to switch statements.
(f_type_print_base): Remove unused variables.
* f-valprint.c (gdbcore.h, command.h): Include.
(f77_get_dynamic_lowerbound, f77_get_dynamic_upperbound):
Call read_memory_integer with correct number of arguments.
(f77_get_dynamic_upperbound): Call f77_get_dynamic_lowerbound
with correct argument type.
(f77_print_array): Removed unused array array_size_array.
(f_val_print): Don't use a CORE_ADDR as a char *.
* valops.c (value_cast): Handle COMPLEX and BOOL types.
(value_assign): Handle Fortran literal string and complex values.
(f77_cast_into_complex, f77_assign_from_literal_string,
f77_assign_from_literal_complex): New functions.
Ian Lance Taylor [Tue, 6 Sep 1994 20:40:37 +0000 (20:40 +0000)]
Minor tweaks to make COFF code support both new and old style linker.
Per Bothner [Tue, 6 Sep 1994 20:23:16 +0000 (20:23 +0000)]
* pr-5016.ch, pr-5016.exp, Makefile.in: New testcase.
* Makefile.in (.exe.check): New rule, to run just one test.
Per Bothner [Tue, 6 Sep 1994 20:17:29 +0000 (20:17 +0000)]
Note fix to lib/gdb.exp.
Ian Lance Taylor [Tue, 6 Sep 1994 19:28:55 +0000 (19:28 +0000)]
Add new style linker support to COFF backend. a29k only for now.
* cofflink.c: New file.
* libcoff-in.h: Include bfdlink.h.
(obj_coff_external_syms, obj_coff_strings): Define accessor macro.
(obj_coff_sym_hashes): Define accessor macro.
(struct coff_tdata): Add fields external_syms, strings, and
sym_hashes.
(struct coff_link_hash_entry): Define.
(struct coff_link_hash_table): Define.
(coff_link_hash_lookup, coff_link_hash_traverse): Define.
(coff_hash_table): Define.
(_bfd_coff_link_hash_table_create): Declare.
(_bfd_coff_link_add_symbols, _bfd_coff_final_link): Declare.
* coffcode.h (bfd_coff_backend_data): Add fields _bfd_relsz,
_bfd_coff_swap_reloc_in, _bfd_coff_sym_is_global,
_bfd_coff_compute_section_file_positions,
_bfd_coff_relocate_section.
(bfd_coff_relsz, bfd_coff_swap_reloc_in): Define.
(bfd_coff_sym_is_global): Define.
(bfd_coff_compute_section_file_positions): Define.
(bfd_coff_relocate_section): Define.
(coff_mkobject_hook): Initialize obj_raw_syment_count and
obj_conv_table_size.
(coff_compute_section_file_positions): Set target_index of all
sections. Set output_has_begun field.
(coff_write_object_contents): Don't set target_index; now done by
coff_compute_section_file_positions. Remove obsolete handling of
scn_base and data_base. Don't bother to check that target_index
is positive, since it always is. Remove use of pad, which is
always zero. Check obj_raw_syment_count, not bfd_get_symcount,
for the number of symbols, but only write them out if
bfd_get_symcount is non-zero.
(coff_slurp_symbol_table): Use obj_raw_syment_count, not
bfd_get_symcount for the number of symbols. Don't set
obj_conv_table_size.
(coff_sym_is_global): New static function or macro.
(coff_slurp_reloc_table): Call coff_swap_reloc_in, not
bfd_swap_reloc_in.
(coff_bfd_link_hash_table_create): If coff_relocate_section is
defined, define as _bfd_coff_link_hash_table_create.
(coff_bfd_link_add_symbols): Similar change.
(coff_bfd_final_link): Similar change.
(coff_relocate_section): Define as NULL if not defined.
(bfd_coff_std_swap_table): Initialize new fields.
* coffgen.c (coff_real_object_p): Don't set obj_raw_syment_count
and obj_conv_table_size here.
(coff_count_linenumbers): Reindent. If bfd_get_symcount is zero,
add up the line numbers from the sections.
(coff_write_symbols): Don't set bfd_get_symcount.
(coff_pointerize_aux): Don't pointerize a nonpositive x_endndx
field.
(coff_get_normalized_symtab): Use obj_raw_syment_count, not
bfd_get_symcount.
(coff_print_symbol): If auxp->fix_end, print x_endndx value.
* coffswap.h (coff_swap_reloc_in): Rename from bfd_swap_reloc_in.
Reindent. Change argument type to PTR.
* coff-a29k.c (coff_a29k_relocate_section): New static function.
(coff_relocate_section): Define.
* configure.in (a29kcoff_big_vec): Compile cofflink.o.
* coff-alpha.c (alpha_ecoff_backend_data): Initialize new fields.
* coff-mips.c (mips_ecoff_backend_data): Likewise.
* libcoff.h: Rebuilt.
* Makefile.in: Rebuilt dependencies.
(BFD32_BACKENDS): Add cofflink.o.
(CFILES): Add cofflink.c.
Ken Raeburn [Tue, 6 Sep 1994 18:30:06 +0000 (18:30 +0000)]
* coffgen.c (coff_print_symbol, case bfd_symbol_print_all): Check for section
symbol, and print its aux fields with appropriate labels.
Ken Raeburn [Tue, 6 Sep 1994 18:03:03 +0000 (18:03 +0000)]
Makefile.in (ALL_MACHINES): ADded cpu-arm.o.
Ian Lance Taylor [Tue, 6 Sep 1994 15:51:09 +0000 (15:51 +0000)]
* config/tc-mips.c (mips_cpu): New static variable.
(insns_since_cache_access): New static variable.
(md_begin): Set mips_cpu as well as mips_isa.
(append_insn): If mips_cpu is 4600, require four nop instructions
between an instruction which accesses the cache and certain CACHE
instructions. Keep track of the number of instructions seen since
an instruction which accesses the cache.
(md_parse_option): Set mips_cpu as well as mips_isa.
PR 5433.
Ian Lance Taylor [Tue, 6 Sep 1994 15:42:11 +0000 (15:42 +0000)]
* mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
which store a value into memory.
PR 5433.
Ian Lance Taylor [Tue, 6 Sep 1994 15:39:52 +0000 (15:39 +0000)]
* mips.h (INSN_STORE_MEMORY): Define.
PR 5433.