3c59x: Specify window explicitly for access to windowed registers

Currently much of the code assumes that a specific window has been
selected, while a few functions save and restore the window.  This
makes it impossible to introduce fine-grained locking.

Make those assumptions explicit by introducing wrapper functions
to set the window and read/write a register.  Use these everywhere
except vortex_interrupt(), vortex_start_xmit() and vortex_rx().
These set the window just once, or not at all in the case of
vortex_rx() as it should always be called from vortex_interrupt().

Cache the current window in struct vortex_private to avoid
unnecessary hardware writes.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Arne Nordmark <nordmark@mech.kth.se> [against 2.6.32]
Signed-off-by: David S. Miller <davem@davemloft.net>

mlx4: add dynamic LRO disable support

This patch adds dynamic LRO diable support for mlx4 net driver.
It also fixes a bug of mlx4, which checks NETIF_F_LRO flag in rx
path without rtnl lock.

(I don't have mlx4 card, so only did compiling test. Anyone who wants
to test this is more than welcome.)

This is based on Neil's initial work too, and heavily modified based
on Stanislaw's suggestions.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Neil Horman <nhorman@redhat.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s2io: add dynamic LRO disable support

This patch adds dynamic LRO disable support for s2io net driver,
enables LRO by default, increases the driver version number, and
corrects the name of the LRO modparm.

This is mostly Wang's patch based on Neil's initial work, heavily
modified based on Ramkrishna's suggestions.  This has been tested on
a Neterion Xframe adapter and verified via adapter LRO statistics.

Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Neil Horman <nhorman@redhat.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Ramkrishna Vepa <Ramkrishna.Vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syncookies: add support for ECN

Allows use of ECN when syncookies are in effect by encoding ecn_ok
into the syn-ack tcp timestamp.

While at it, remove a uneeded #ifdef CONFIG_SYN_COOKIES.
With CONFIG_SYN_COOKIES=nm want_cookie is ifdef'd to 0 and gcc
removes the "if (0)".

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

syncookies: do not store rcv_wscale in tcp timestamp

As pointed out by Fernando Gont there is no need to encode rcv_wscale
into the cookie.

We did not use the restored rcv_wscale anyway; it is recomputed
via tcp_select_initial_window().

Thus we can save 4 bits in the ts option space by removing rcv_wscale.
In case window scaling was not supported, we set the (invalid) wscale
value 0xf.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: remove ipv6_statistics

commit 9261e5370112 (ipv6: making ip and icmp statistics per/namespace)
forgot to remove ipv6_statistics variable.

commit bc417d99bf27 (ipv6: remove stale MIB definitions) took care of
icmpv6_statistics & icmpv6msg_statistics

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Denis V. Lunev <den@openvz.org>
CC: Alexey Dobriyan <adobriyan@gmail.com>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

snmp: add align parameter to snmp_mib_init()

In preparation for 64bit snmp counters for some mibs,
add an 'align' parameter to snmp_mib_init(), instead
of assuming mibs only contain 'unsigned long' fields.

Callers can use __alignof__(type) to provide correct
alignment.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
CC: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

loopback: use u64_stats_sync infrastructure

Commit 6b10de38f0ef (loopback: Implement 64bit stats on 32bit arches)
introduced 64bit stats in loopback driver, using a private seqcount and
private helpers.

David suggested to introduce a generic infrastructure, added in (net:
Introduce u64_stats_sync infrastructure)

This patch reimplements loopback 64bit stats using the u64_stats_sync
infrastructure.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arp: RCU change in arp_solicit()

Avoid two atomic ops in arp_solicit()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: make implementation of Syn-RTT symmetric

This patch is thanks to Andre Noll who reported the issue and helped testing.

The Syn-RTT sampled during the initial handshake currently only works for
the client sending the DCCP-Request. TFRC penalizes the absence of an RTT
sample with a very slow initial speed (1 packet per second), which delays
slow-start significantly, resulting in sluggish performance.

This patch mirrors the "Syn RTT" principle by adding a timestamp also onto
the DCCP-Response, producing an RTT sample  when the (Data)Ack completing
the handshake arrives.

Also changed the documentation to 'TFRC' since Syn RTTs are also used by CCID-4.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: remove unused function argument

This removes an unused 'sk' argument from several option-inserting functions.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/fec: clean suspend/resume

Commit 59d4289b83b11379d867e2f7146904b19cc96404 converted fec to dev_pm_ops but
didn't update the suspend/resume functions thus leading to the following warning :
"initialization from incompatible pointer type" when CONFIG_PM is set.

This patch also fixe a few indentation and style around CONFIG_PM area.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Cc: netdev@vger.kernel.org
Cc: davem@davemloft.net
Cc: amit.kucheria@canonical.com
Cc: s.hauer@pengutronix.de
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb3: request 7.10 firmware

The driver requests FW 7.10
Bump up driver version.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb3: update FW to 7.10

Update FW to 7.10

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/core/pktgen.c: Use pr_<level>

Add pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove "pktgen: " from formats
Convert printks to pr_<level>
Added func_enter() for debugging
Moved version to end of string at module_init
Coalesced long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: optimize Berkeley Packet Filter (BPF) processing

Gcc is currenlty not in the ability to optimize the switch statement in
sk_run_filter() because of dense case labels. This patch replace the
OR'd labels with ordered sequenced case labels. The sk_chk_filter()
function is modified to patch/replace the original OPCODES in a
ordered but equivalent form. gcc is now in the ability to transform the
switch statement in sk_run_filter into a jump table of complexity O(1).

Until this patch gcc generates a sequence of conditional branches (O(n) of 567
byte .text segment size (arch x86_64):

7ff: 8b 06                 mov    (%rsi),%eax
801: 66 83 f8 35           cmp    $0x35,%ax
805: 0f 84 d0 02 00 00     je     adb <sk_run_filter+0x31d>
80b: 0f 87 07 01 00 00     ja     918 <sk_run_filter+0x15a>
811: 66 83 f8 15           cmp    $0x15,%ax
815: 0f 84 c5 02 00 00     je     ae0 <sk_run_filter+0x322>
81b: 77 73                 ja     890 <sk_run_filter+0xd2>
81d: 66 83 f8 04           cmp    $0x4,%ax
821: 0f 84 17 02 00 00     je     a3e <sk_run_filter+0x280>
827: 77 29                 ja     852 <sk_run_filter+0x94>
829: 66 83 f8 01           cmp    $0x1,%ax
[...]

With the modification the compiler translate the switch statement into
the following jump table fragment:

7ff: 66 83 3e 2c           cmpw   $0x2c,(%rsi)
803: 0f 87 1f 02 00 00     ja     a28 <sk_run_filter+0x26a>
809: 0f b7 06              movzwl (%rsi),%eax
80c: ff 24 c5 00 00 00 00  jmpq   *0x0(,%rax,8)
813: 44 89 e3              mov    %r12d,%ebx
816: e9 43 03 00 00        jmpq   b5e <sk_run_filter+0x3a0>
81b: 41 89 dc              mov    %ebx,%r12d
81e: e9 3b 03 00 00        jmpq   b5e <sk_run_filter+0x3a0>

Furthermore, I reordered the instructions to reduce cache line misses by
order the most common instruction to the start.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Log clearer error messages for hardware monitor

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Use Toeplitz IPv4 hash for RSS and hash insertion

Insertion of the Falcon hash is unreliable.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Move siena_nic_data::ipv6_rss_key to efx_nic::rx_hash_key

We will use this hash key for Toeplitz IPv4 hashing too.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Fix reading of inserted hash

The hash appears immediately before the packet data, not at the
beginning of the buffer. This means we can easily use negative offsets
from the start of packet data, so adjust the data and length at the
top of __efx_rx_packet() instead of wherever we consume the hash.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Clean ups

1) Update copyright
2) Fix hardware queue descriptor field size CQ_ENET_RQ_DESC_FCOE_SOF_BITS
3) Include rtnetlink.h instead of if_link.h
4) Selectively flush writes to interrupt mask register
5) Use pci_enable_device_mem
6) Remove unused variables and header files
7) Fix size mismatch between memory alloc and free operations of a variable
8) Check for non null arguments to vic_provinfo_alloc

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Bug Fix: Handle surprise hardware removals

Handle surprise hardware removals gracefully during devcmd issue and init,
cleanup of queues.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Feature Add: Add loopback capability to enic devices

Hardware has the loopback capability to queue the packets transmitted from
a device to the receive queue of the same device. enic now supports the
loopback capability.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Use receive queue buffer blocks of 32/64 entries

Change the receive queue buffer allocations into blocks of 32 entries when
ring size is less than 64, otherwise use 64 entries per block.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Add new firmware devcmds

Add new firmware devcmds - CMD_PROXY_BY_BDF, CMD_PACKET_FILTER_ALL,
CMD_ENABLE_WAIT.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Use (netdev|dev|pr)_<level> macro helpers for logging

Replace all printk routines with the (netdev|dev|pr)_<level> macros that
provide verbose logs.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Clean up: Add wrapper routines for firmware devcmd calls

Add wrapper routines that issue devcmds to firmware and ensure that a
devcmd lock is held for each devcmd call.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Use a lighter reset operation for enic devices

The port profile information for a dynamic enic device is set by the upper
layers, that are oblivious to the device reset operation. We do not want a
reset operation erase the network state of a dynamic enic device as there
is no way to set up the port profile information again. Hence a lighter
reset operation called hang reset is used. Hang reset, unlike soft reset
does not reset the network state and resets the host side state only.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Bug Fix: Change hardware ingress vlan rewrite mode

The current ingress vlan rewrite mode setting lets the hardware strip off
the tag control information of a packet received on native vlan. As a
result, the priority bits are also lost. The fix is to change the ingress
vlan rewrite mode setting such that the complete tag control information is
retained for packets that belong to native vlan.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

enic: Feature Add: Replace LRO with GRO

enic now uses the GRO mechanism instead of LRO to pass skbs to upper
layers.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Update version to 2.1.3.

Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Further unify kcq handling code.

This eliminates some of the duplicate code for the various devices
that require the same basic kcq handling.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Restructure kcq processing.

By doing more work in the common function cnic_get_kcqes(), and
making full use of the kcq_info structure.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Unify kcq allocation for all devices.

By creating a common data stucture kcq_info for all devices, the kcq
(kernel completion queue) for all devices can be allocated by common
code.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Unify IRQ code for all hardware types.

By creating a common cnic_doirq().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Fine-tune CID memory space calculation.

The current code makes assumptions about the CID (context ID) memory
space and starting CID that may not be always correct when firmware
changes.  In particular, BNX2_ISCSI_START_CID may not always be fixed.
We now calculate cp->max_cid_space and cp->iscsi_start_cid dynamically
instead of using fixed constants.  The unused cp->max_iscsi_conn is also
eliminated.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Record hardware RX hash on each skb where possible

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Disable setting feature flags that are not implemented

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Replace EFX_DRIVER_NAME with KBUILD_MODNAME

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Implement message level control

Replace EFX_ERR() with netif_err(), EFX_INFO() with netif_info(),
EFX_LOG() with netif_dbg() and EFX_TRACE() and EFX_REGDUMP() with
netif_vdbg().

Replace EFX_ERR_RL(), EFX_INFO_RL() and EFX_LOG_RL() using explicit
calls to net_ratelimit().

Implement the ethtool operations to get and set message level flags,
and add a 'debug' module parameter for the initial value.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Log MTD errors using partition name, not just net device name

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Implement ethtool register dump operation

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: do not send reset to already closed sockets

i've found that tcp_close() can be called for an already closed
socket, but still sends reset in this case (tcp_send_active_reset())
which seems to be incorrect.  Moreover, a packet with reset is sent
with different source port as original port number has been already
cleared on socket.  Besides that incrementing stat counter for
LINUX_MIB_TCPABORTONCLOSE also does not look correct in this case.

Initially this issue was found on 2.6.18-x RHEL5 kernel, but the same
seems to be true for the current mainstream kernel (checked on
2.6.35-rc3).  Please, correct me if i missed something.

How that happens:

1) the server receives a packet for socket in TCP_CLOSE_WAIT state
   that triggers a tcp_reset():

Call Trace:
 <IRQ>  [<ffffffff8025b9b9>] tcp_reset+0x12f/0x1e8
 [<ffffffff80046125>] tcp_rcv_state_process+0x1c0/0xa08
 [<ffffffff8003eb22>] tcp_v4_do_rcv+0x310/0x37a
 [<ffffffff80028bea>] tcp_v4_rcv+0x74d/0xb43
 [<ffffffff8024ef4c>] ip_local_deliver_finish+0x0/0x259
 [<ffffffff80037131>] ip_local_deliver+0x200/0x2f4
 [<ffffffff8003843c>] ip_rcv+0x64c/0x69f
 [<ffffffff80021d89>] netif_receive_skb+0x4c4/0x4fa
 [<ffffffff80032eca>] process_backlog+0x90/0xec
 [<ffffffff8000cc50>] net_rx_action+0xbb/0x1f1
 [<ffffffff80012d3a>] __do_softirq+0xf5/0x1ce
 [<ffffffff8001147a>] handle_IRQ_event+0x56/0xb0
 [<ffffffff8006334c>] call_softirq+0x1c/0x28
 [<ffffffff80070476>] do_softirq+0x2c/0x85
 [<ffffffff80070441>] do_IRQ+0x149/0x152
 [<ffffffff80062665>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff80008a2e>] __handle_mm_fault+0x6cd/0x1303
 [<ffffffff80008903>] __handle_mm_fault+0x5a2/0x1303
 [<ffffffff80033a9d>] cache_free_debugcheck+0x21f/0x22e
 [<ffffffff8006a263>] do_page_fault+0x49a/0x7dc
 [<ffffffff80066487>] thread_return+0x89/0x174
 [<ffffffff800c5aee>] audit_syscall_exit+0x341/0x35c
 [<ffffffff80062e39>] error_exit+0x0/0x84

tcp_rcv_state_process()
...  // (sk_state == TCP_CLOSE_WAIT here)
...
        /* step 2: check RST bit */
        if(th->rst) {
                tcp_reset(sk);
                goto discard;
        }
...
---------------------------------
tcp_rcv_state_process
 tcp_reset
  tcp_done
   tcp_set_state(sk, TCP_CLOSE);
     inet_put_port
      __inet_put_port
       inet_sk(sk)->num = 0;

   sk->sk_shutdown = SHUTDOWN_MASK;

2) After that the process (socket owner) tries to write something to
   that socket and "inet_autobind" sets a _new_ (which differs from
   the original!) port number for the socket:

 Call Trace:
  [<ffffffff80255a12>] inet_bind_hash+0x33/0x5f
  [<ffffffff80257180>] inet_csk_get_port+0x216/0x268
  [<ffffffff8026bcc9>] inet_autobind+0x22/0x8f
  [<ffffffff80049140>] inet_sendmsg+0x27/0x57
  [<ffffffff8003a9d9>] do_sock_write+0xae/0xea
  [<ffffffff80226ac7>] sock_writev+0xdc/0xf6
  [<ffffffff800680c7>] _spin_lock_irqsave+0x9/0xe
  [<ffffffff8001fb49>] __pollwait+0x0/0xdd
  [<ffffffff8008d533>] default_wake_function+0x0/0xe
  [<ffffffff800a4f10>] autoremove_wake_function+0x0/0x2e
  [<ffffffff800f0b49>] do_readv_writev+0x163/0x274
  [<ffffffff80066538>] thread_return+0x13a/0x174
  [<ffffffff800145d8>] tcp_poll+0x0/0x1c9
  [<ffffffff800c56d3>] audit_syscall_entry+0x180/0x1b3
  [<ffffffff800f0dd0>] sys_writev+0x49/0xe4
  [<ffffffff800622dd>] tracesys+0xd5/0xe0

3) sendmsg fails at last with -EPIPE (=> 'write' returns -EPIPE in userspace):

F: tcp_sendmsg1 -EPIPE: sk=ffff81000bda00d0, sport=49847, old_state=7, new_state=7, sk_err=0, sk_shutdown=3

Call Trace:
 [<ffffffff80027557>] tcp_sendmsg+0xcb/0xe87
 [<ffffffff80033300>] release_sock+0x10/0xae
 [<ffffffff8016f20f>] vgacon_cursor+0x0/0x1a7
 [<ffffffff8026bd32>] inet_autobind+0x8b/0x8f
 [<ffffffff8003a9d9>] do_sock_write+0xae/0xea
 [<ffffffff80226ac7>] sock_writev+0xdc/0xf6
 [<ffffffff800680c7>] _spin_lock_irqsave+0x9/0xe
 [<ffffffff8001fb49>] __pollwait+0x0/0xdd
 [<ffffffff8008d533>] default_wake_function+0x0/0xe
 [<ffffffff800a4f10>] autoremove_wake_function+0x0/0x2e
 [<ffffffff800f0b49>] do_readv_writev+0x163/0x274
 [<ffffffff80066538>] thread_return+0x13a/0x174
 [<ffffffff800145d8>] tcp_poll+0x0/0x1c9
 [<ffffffff800c56d3>] audit_syscall_entry+0x180/0x1b3
 [<ffffffff800f0dd0>] sys_writev+0x49/0xe4
 [<ffffffff800622dd>] tracesys+0xd5/0xe0

tcp_sendmsg()
...
        /* Wait for a connection to finish. */
        if ((1 << sk->sk_state) & ~(TCPF_ESTABLISHED | TCPF_CLOSE_WAIT)) {
                int old_state = sk->sk_state;
                if ((err = sk_stream_wait_connect(sk, &timeo)) != 0) {
if (f_d && (err == -EPIPE)) {
        printk("F: tcp_sendmsg1 -EPIPE: sk=%p, sport=%u, old_state=%d, new_state=%d, "
                "sk_err=%d, sk_shutdown=%d\n",
                sk, ntohs(inet_sk(sk)->sport), old_state, sk->sk_state,
                sk->sk_err, sk->sk_shutdown);
        dump_stack();
}
                        goto out_err;
                }
        }
...

4) Then the process (socket owner) understands that it's time to close
   that socket and does that (and thus triggers sending reset packet):

Call Trace:
...
 [<ffffffff80032077>] dev_queue_xmit+0x343/0x3d6
 [<ffffffff80034698>] ip_output+0x351/0x384
 [<ffffffff80251ae9>] dst_output+0x0/0xe
 [<ffffffff80036ec6>] ip_queue_xmit+0x567/0x5d2
 [<ffffffff80095700>] vprintk+0x21/0x33
 [<ffffffff800070f0>] check_poison_obj+0x2e/0x206
 [<ffffffff80013587>] poison_obj+0x36/0x45
 [<ffffffff8025dea6>] tcp_send_active_reset+0x15/0x14d
 [<ffffffff80023481>] dbg_redzone1+0x1c/0x25
 [<ffffffff8025dea6>] tcp_send_active_reset+0x15/0x14d
 [<ffffffff8000ca94>] cache_alloc_debugcheck_after+0x189/0x1c8
 [<ffffffff80023405>] tcp_transmit_skb+0x764/0x786
 [<ffffffff8025df8a>] tcp_send_active_reset+0xf9/0x14d
 [<ffffffff80258ff1>] tcp_close+0x39a/0x960
 [<ffffffff8026be12>] inet_release+0x69/0x80
 [<ffffffff80059b31>] sock_release+0x4f/0xcf
 [<ffffffff80059d4c>] sock_close+0x2c/0x30
 [<ffffffff800133c9>] __fput+0xac/0x197
 [<ffffffff800252bc>] filp_close+0x59/0x61
 [<ffffffff8001eff6>] sys_close+0x85/0xc7
 [<ffffffff800622dd>] tracesys+0xd5/0xe0

So, in brief:

* a received packet for socket in TCP_CLOSE_WAIT state triggers
  tcp_reset() which clears inet_sk(sk)->num and put socket into
  TCP_CLOSE state

* an attempt to write to that socket forces inet_autobind() to get a
  new port (but the write itself fails with -EPIPE)

* tcp_close() called for socket in TCP_CLOSE state sends an active
  reset via socket with newly allocated port

This adds an additional check in tcp_close() for already closed
sockets. We do not want to send anything to closed sockets.

Signed-off-by: Konstantin Khorenko <khorenko@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

broadcom: Add 5241 support

This patch adds the 5241 PHY ID to the broadcom module.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

broadcom: move all PHY_ID's to header

Move all PHY IDs to brcmphy.h header for completeness and unification of code.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix "netpoll: Allow netpoll_setup/cleanup recursion"

Remove rtnl_unlock() which had no corresponding rtnl_lock().

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:
net/ipv4/ip_output.c

sky2: enable rx/tx in sky2_phy_reinit()

sky2_phy_reinit is called by the ethtool helpers sky2_set_settings,
sky2_nway_reset and sky2_set_pauseparam when netif_running.

However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and
GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to
stop working:

$ ethtool -r eth0
$ ethtool -A eth0 autoneg off

Fix this issue by enabling Rx/Tx after running sky2_phy_init in
sky2_phy_reinit.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Tested-by: Brandon Philips <bphilips@suse.de>
Cc: stable@kernel.org
Tested-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net - IP_NODEFRAG option for IPv4 socket

this patch is implementing IP_NODEFRAG option for IPv4 socket.
The reason is, there's no other way to send out the packet with user
customized header of the reassembly part.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: handle missing z/VM authorization of OSX

For z/VM guest operating systems, OSX CHPIDs can only be used, if
LPAR and z/VM userID are explicitly authorized through the Service
Element. Issue a message if this SE-authorization is missing.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: specify correct function level for OSN devices

OSN devices use the same function level as OSD devices. This patch
adds OSN-devices to the initialization function for func_level.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: fix page breaks in hw headers

Turning on memory debugging showed there could be page breaks in
hardware headers. OSA does not allow this so we had to add code
to bounce the header in case there is a page break. This patch also
fixes a problem in case the skb->data part of a fragmented skb
spreads multiple pages.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: fix use after free for qeths debug area

The function qeth_free_buffer_pool is called _after_ the per-card
debug area has been released. This debug message is not all that
usefull anyway, and thus gets removed.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: Fold qeth_qerr debug area

This patch removes the qerr debug area. Most info that goes in here is logged
to the card's local debug area already, those duplicates are removed. All other
elements are moved to the card's local debug area.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: Fold qeth_misc debug area

This patch removes the misc debug area. Instead of logging the entire skb
we just log a pointer to it into the card's local debug area in
qeth_core_get_next_skb. Other then that, this debug area is not used anywhere.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: Fold qeth_sense debug area

This patch removes the sense debug area completely. Despite the name this
debug area makes no sense at all because it's unused completely. Ouch.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: Fold qeth_trace debug area

This patch removes the qeth_trace debug area. All relevant data is logged into
either qeth_setup or into each card's own debug area. Superfluous information
(such as the card number when logging into the card's own debug area) is
removed without replacement.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: Add new s390 debug feature for each qeth card

This patch adds a debug area for each qeth card. This debug area will replace
various other debug areas that are global for all cards handled by the device
driver. On crash dump analysis this makes life easier when trying to find out
what's going on with an interface. Also, the forest of debug areas for this
device driver is significantly cleared up.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qeth: Rework qeth_dbf_longtext

This patch decouples qeth_dbf_longtext from qeth's static debug array. The
function only uses one member anyway.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

smsgiucv: guarantee single iucv connect in thaw

If another smsgiucv_app device exists, suspend / resume fails with
iucv path list corruption, because the same iucv_path_connect is
called twice.
The patch introduces a flag to save connect status of the smsgiucv
path to make sure iucv_path_connect in smsg_pm_restore_thaw is
called only once.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: update version to 5.0.6

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: mark context state freed after destroy

After destroying recv ctx, context state remain same.
Fix it by marking as FREED.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: offload tx timeout recovery

Offload tx timeout recovery to fw recovery func(check_health).
In check_health, first check health of device, if it its ok, then
do tx timeout recovery otherwise device recovery.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: dont free host resources during fw recovery

There is no need to free/alloc host resources during firmware
recovery.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: release device resources during interface down

Previously we were allocating device resources during probe and
release them during remove.
Now alloc during interface up and release in interface down.
This helps in device performance, as it doesn't need to keep
track of inactive resources.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: fix mac address mgmt

We first add mac address in driver local list and then send command to
fw to add same. There are checks in driver to ensure send command doesn't fail
before adding mac address in local list.

But instead fix should be:
Add mac address in fw and if it succeeds, add it in driver local list.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: handshake with card after fw load

Instead of delaying rcv handshake till interface comes up,
do it just after fw load.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlcnic: cleanup skb allocation

No need to maintian separate state for alloced and freed skb.
This can be done by null check.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bridge: 64bit rx/tx counters

Use u64_stats_sync infrastructure to provide 64bit rx/tx
counters even on 32bit hosts.

It is safe to use a single u64_stats_sync for rx and tx,
because BH is disabled on both, and we use per_cpu data.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Introduce u64_stats_sync infrastructure

To properly implement 64bits network statistics on 32bit or 64bit hosts,
we provide one new type and four methods, to ease conversions.

Stats producer should use following template granted it already got an
exclusive access to counters (include/linux/u64_stats_sync.h contains
some documentation about details)

    u64_stats_update_begin(&stats->syncp);
    stats->bytes64 += len;
    stats->packets64++;
    u64_stats_update_end(&stats->syncp);

While a consumer should use following template to get consistent
snapshot :

    u64 tbytes, tpackets;
    unsigned int start;

    do {
        start = u64_stats_fetch_begin(&stats->syncp);
        tbytes = stats->bytes64;
        tpackets = stats->packets64;
    } while (u64_stats_fetch_retry(&stats->lock, syncp));

Suggested by David Miller, and comments courtesy of Nick Piggin.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: consolidate netif_needs_gso() checks

netif_needs_gso() is checked twice in the TX path once,
before submitting the skb to the qdisc and once after
it is dequeued from the qdisc just before calling
ndo_hard_start().  This opens a window for a user to
change the gso/tso or tx checksum settings that can
cause netif_needs_gso to be true in one check and false
in the other.

Specifically, changing TX checksum setting may cause
the warning in skb_gso_segment() to be triggered if
the checksum is calculated earlier.

This consolidates the netif_needs_gso() calls so that
the stack only checks if gso is needed in
dev_hard_start_xmit().

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: Fix a typo in netlink.h

Fix a typo in include/net/netlink.h
should be finalize instead of finanlize

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: disable gig speed when in S0->Sx transition

Most of this workaround is necessary for all ICHx/PCH parts so one of
the two MAC-type checks can be removed.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: packet split should not be used with early receive

Originally it was thought there were issues with ICHx/PCH parts with packet
split when jumbo frames were enabled but in fact it is really only when
early-receive is enabled (via ERT register) on these parts.  Use packet
split with jumbos but only when early-receive is not enabled.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: do not touch PHY page 800 registers when link speed is 1000Mbps

The PHY on 82577/82578 has issues when the registers on page 800 are
accessed when in gigabit mode.  Do not clear the Wakeup Control register
when resetting the part since it is on page 800 (and will be cleared on
reset anyway).

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: avoid polling h/w registers during link negotiation

Avoid touching hardware registers when possible, otherwise link negotiation
can get messed up when user-level scripts are rapidly polling the driver to
see if/when link is up.  Use the saved link state information instead when
possible.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Disable statistics initialization for eth clients that do not support statistics

Disable statistics initialization for eth clients that do not support
 statistics. This prevents memory corruption on bnx2x hw.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>

net: add dependency on fw class module to qlcnic and netxen_nic

netxen_nic and qlcnic driver depends on firmware_class module.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

snmp: fix SNMP_ADD_STATS()

commit aa2ea0586d9d (tcp: fix outsegs stat for TSO segments) incorrectly
assumed SNMP_ADD_STATS() was used from BH context.

Fix this using mib[!in_softirq()] instead of mib[0]

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

hso: remove setting of low_latency flag

This patch removes the setting of the low_latency flag.
tty_flip_buffer_push() is occasionally being called in irq context, which
causes a hang if the low_latency flag is set.
Removing the low_latency flag only seems to impact the flush to ldisc,
which will now be put on a workqueue.

Signed-off-by: Filip Aben <f.aben@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

udp: Fix bogus UFO packet generation

It has been reported that the new UFO software fallback path
fails under certain conditions with NFS.  I tracked the problem
down to the generation of UFO packets that are smaller than the
MTU.  The software fallback path simply discards these packets.

This patch fixes the problem by not generating such packets on
the UFO path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lasi82596: fix netdev_mc_count conversion

Fix commit 4cd24eaf0 (net: use netdev_mc_count and netdev_mc_empty when
appropriate)

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

NET: MIPSsim: Fix modpost warning.

$ make CONFIG_DEBUG_SECTION_MISMATCH=y
[...]
WARNING: drivers/net/built-in.o(.data+0x0): Section mismatch in reference from the variable mipsnet_driver to the function .init.text:mipsnet_probe()
The variable mipsnet_driver references
the function __init mipsnet_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
[...]

Fixed by making mipsnet_probe __devinit.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 drivers/net/mipsnet.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Add debug connection type for CAIF.

Added new CAIF protocol type CAIFPROTO_DEBUG for accessing
CAIF debug on the ST Ericsson modems.

There are two debug servers on the modem, one for radio related
debug (CAIF_RADIO_DEBUG_SERVICE) and the other for
communication/application related debug (CAIF_COM_DEBUG_SERVICE).

The debug connection can contain trace debug printouts or
interactive debug used for debugging and test.

Debug connections can be of type STREAM or SEQPACKET.

Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Use link layer MTU instead of fixed MTU

Previously CAIF supported maximum transfer size of ~4050.
The transfer size is now calculated dynamically based on the
link layers mtu size.

Signed-off-by: Sjur Braendeland@stericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Bugfix - RFM must support segmentation.

CAIF Remote File Manager may send or receive more than 4050 bytes.
Due to this The CAIF RFM service have to support segmentation.

Signed-off-by: Sjur Braendeland@stericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>

caif: Bugfix not all services uses flow-ctrl.

Flow control is not used by all CAIF services.
The usage of flow control is now part of the gerneal
initialization function for CAIF Services.

Signed-off-by: Sjur Braendeland@stericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: update driver version number

Also separate out an _EXTRAVERSION similar to the core kernel.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: update copyright information

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: enable support for EEE on 82579

This patch enables IEEE802.3az (a.k.a. Energy Efficient Ethernet) on the
new 82579 LOMs.  An optional module parameter is provided to disable the
feature if desired.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: initial support for 82579 LOMs

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: fix check for manageability on ICHx/PCH

Do not check for all the bits in E1000_FWSM_MODE_MASK when checking for
manageability on 82577/82578; only check if iAMT is enabled.  Both of the
manageability checks (for 82577/82578 and ICHx) must check the firmware
valid bit too since the other bits are only valid when the latter is set.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: separate out PHY statistics register updates

The 82577/82578 parts have half-duplex statistics in PHY registers.  These
need only be read when in half-duplex and should all be read at once rather
than one at a time to prevent excessive cycles of acquiring/releasing the
PHY semaphore.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: cleanup e1000_sw_lcd_config_ich8lan()

Do not acquire and release the PHY unnecessarily for parts that return
from this workaround without actually accessing the PHY registers.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

e1000e: cleanup ethtool loopback setup code

Refactor the loopback setup code to first handle the only 10/100 PHY
supported by the driver if applicable and then handle the 1Gig PHYs in a
switch statement for PHY-specific setups.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: minor cleanup

Remove an unused flag and replace couple constants with enums.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: update FW definitions

Update to latest FW API.  Most changes here pertain to port types and
querying FW for parameter values.

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: add a missing error interrupt

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: propagate link initialization errors to .ndo_open's callers

Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>