RDMA/bnxt_re: Wait for delayed work to finish before device removal

Delayed work bnxt_re_worker would be still running even after
cancel_delayed_work returns. This causes crash as the driver proceeds with
device removal. To make sure that the work is finished before returning,
use cancel_delayed_work_sync.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Limit max_pkey to 16 bit value

Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of
ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Fix qp async event reporting

Reports affiliated async event on the qp-async event channel instead of
global event channel.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Report out of sequence hw counters

Expose out of sequence errors received from FW.  This counter is a 32 bit
counter and driver has to accumulate the counter. Stores the previous
value for calculating the difference in the next query.

Also, update the HW statistics structure with new fields.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Expose rx discards and drop counters

Expose the RoCE discard and drop counters from the HW statistics context

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Prevent driver crash due to NULL pointer in error message print

crsqe->resp would be NULL in case the host command timed out before
getting a response from HW. Check for NULL pointer to avoid a potential
crash while printing the error message.

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Drop L2 async events silently

In some FW versions, RoCE driver also receives an async notification which
was directed to L2 driver.  RoCE driver does not handle this and print a
message to syslog.  Drop these notifications silently.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Avoid accessing nq->bar_reg_iomem in failure case

In the failure path, nq->bar_reg_iomem gets accessed without
initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the
initialization is complete.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Avoid NULL check after accessing the pointer

This is reported by smatch check.  rcfw->creq_bar_reg_iomem is accessed in
bnxt_qplib_rcfw_stop_irq and this variable check afterwards doesn't make
sense.  Also, rcfw->creq_bar_reg_iomem will never be NULL.  So Removing
this check.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Remove the unnecessary version macro definition

Version macro is not required as the driver is not maintaining the
version. Removing the references of this macro too.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Fix recursive lock warning in debug kernel

Fix possible recursive lock warning. Its a false warning as the locks are
part of two differnt HW Queue data structure - cmdq and creq. Debug kernel
is throwing the following warning and stack trace.

[  783.914967] ============================================
[  783.914970] WARNING: possible recursive locking detected
[  783.914973] 4.19.0-rc2+ #33 Not tainted
[  783.914976] --------------------------------------------
[  783.914979] swapper/2/0 is trying to acquire lock:
[  783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.914999]
but task is already holding lock:
[  783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915013]
other info that might help us debug this:
[  783.915016]  Possible unsafe locking scenario:

[  783.915019]        CPU0
[  783.915021]        ----
[  783.915034]   lock(&(&hwq->lock)->rlock);
[  783.915035]   lock(&(&hwq->lock)->rlock);
[  783.915037]
 *** DEADLOCK ***

[  783.915038]  May be due to missing lock nesting notation

[  783.915039] 1 lock held by swapper/2/0:
[  783.915040]  #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re]
[  783.915044]
stack backtrace:
[  783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33
[  783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014
[  783.915048] Call Trace:
[  783.915049]  <IRQ>
[  783.915054]  dump_stack+0x90/0xe3
[  783.915058]  __lock_acquire+0x106c/0x1080
[  783.915061]  ? sched_clock+0x5/0x10
[  783.915063]  lock_acquire+0xbd/0x1a0
[  783.915065]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915069]  _raw_spin_lock_irqsave+0x4a/0x90
[  783.915071]  ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915073]  bnxt_qplib_service_creq+0x232/0x350 [bnxt_re]
[  783.915078]  tasklet_action_common.isra.17+0x197/0x1b0
[  783.915081]  __do_softirq+0xcb/0x3a6
[  783.915084]  irq_exit+0xe9/0x100
[  783.915085]  do_IRQ+0x6a/0x120
[  783.915087]  common_interrupt+0xf/0xf
[  783.915088]  </IRQ>

Use nested notation for the spin_lock to avoid this warning.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/bnxt_re: Add missing spin lock initialization

Add the missing initalization of the cq_lock and qplib.flush_lock.

Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge branch 'for-rc' into rdma.git for-next

From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git

This is required to resolve dependencies of the next series of RDMA
patches.

The code motion conflicts in drivers/infiniband/core/cache.c were
resolved.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Unmap DMA addr from HCA before IOMMU

The function that puts back the MR in cache also removes the DMA address
from the HCA. Therefore we need to call this function before we remove
the DMA mapping from MMU. Otherwise the HCA may access a memory that
is no longer DMA mapped.

Call trace:
NMI: IOCK error (debug interrupt?) for reason 71 on CPU 0.
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc6+ #4
Hardware name: HP ProLiant DL360p Gen8, BIOS P71 08/20/2012
RIP: 0010:intel_idle+0x73/0x120
Code: 80 5c 01 00 0f ae 38 0f ae f0 31 d2 65 48 8b 04 25 80 5c 01 00 48 89 d1 0f 60 02
RSP: 0018:ffffffff9a403e38 EFLAGS: 00000046
RAX: 0000000000000030 RBX: 0000000000000005 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff9a5790c0 RDI: 0000000000000000
RBP: 0000000000000030 R08: 0000000000000000 R09: 0000000000007cf9
R10: 000000000000030a R11: 0000000000000018 R12: 0000000000000000
R13: ffffffff9a5792b8 R14: ffffffff9a5790c0 R15: 0000002b48471e4d
FS:  0000000000000000(0000) GS:ffff9c6caf400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5737185000 CR3: 0000000590c0a002 CR4: 00000000000606f0
Call Trace:
 cpuidle_enter_state+0x7e/0x2e0
 do_idle+0x1ed/0x290
 cpu_startup_entry+0x6f/0x80
 start_kernel+0x524/0x544
 ? set_init_arg+0x55/0x55
 secondary_startup_64+0xa4/0xb0
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read] Request device [04:00.0] fault addr b34d2000 [fault reason 06] PTE Read access is not set
DMAR: [DMA Read] Request device [01:00.2] fault addr bff8b000 [fault reason 06] PTE Read access is not set

Fixes: f3f134f5260a ("RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory")
Signed-off-by: Valentine Fatiev <valentinef@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

RDMA/restrack: Release task struct which was hold by CM_ID object

Tracking CM_ID resource is performed in two stages: creation of cm_id
and connecting it to the cma_dev. It is needed because rdma-cm protocol
exports two separate user-visible calls rdma_create_id and rdma_accept.

At the time of CM_ID creation, the real owner of that object is unknown
yet and we need to grab task_struct. This task_struct is released or
reassigned in attach phase later on. but call to rdma_destroy_id left
this task_struct unreleased.

Such separation is unique to CM_ID and other restrack objects initialize
in one shot. It means that it is safe to use "res->valid" check to catch
unfinished CM_ID flow and release task_struct for that object.

Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Reported-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/restrack: Consolidate task name updates in one place

Unify task update and kernel name set in one place.

Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/restrack: Un-inline set task implementation

Prepare rdma_restrack_set_task() call to accommodate more
code by moving its implementation from *.h to *.c.

Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Check error status of rdma_find_ndev_for_src_ip_rcu

rdma_find_ndev_for_src_ip_rcu() returns either valid netdev pointer or
ERR_PTR().  Instead of checking for NULL, check for error.

Fixes: caf1e3ae9fa6 ("RDMA/core Introduce and use rdma_find_ndev_for_src_ip_rcu")
Reported-by: syzbot+20c32fa6ff84a2d28c36@syzkaller.appspotmail.com
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt

This patch moves ruc_loopback() from hfi1 into rdmavt for code sharing
with the qib driver.

Reviewed-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{hfi1, qib, rdmavt}: Move send completion logic to rdmavt

Moving send completion code into rdmavt in order to have shared logic
between qib and hfi1 drivers.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/{hfi1, qib, rdmavt}: Move copy SGE logic into rdmavt

This patch moves hfi1_copy_sge() into rdmavt for sharing with qib.
This patch also moves all the wss_*() functions into rdmavt as
several wss_*() functions are called from hfi1_copy_sge()

When SGE copy mode is adaptive, cacheless copy may be done in some cases
for performance reasons. In those cases, X86 cacheless copy function
is called since the drivers that use rdmavt and may set SGE copy mode
to adaptive are X86 only. For this reason, this patch adds
"depends on X86_64" to rdmavt/Kconfig.

Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx4: Avoid implicit enumerated type conversion

Clang warns when one enumerated type is implicitly converted to another.

drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
                qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP;
                                                    ~ ^~~~~~~~~~~~~~~~~~~~~~~

drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
                qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP;
                                                    ~ ^~~~~~~~~~~~~~~~~

The type mlx4_ib_qp_flags explicitly provides supplemental values to the
type ib_qp_create_flags. Make that clear to Clang by changing the
create_flags type to u32.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Bugfix for atomic operation

The atomic operation not supported inline. Besides, the standard atomic
operation only support a sge and the sge is placed in the wqe.

Fix: 384f881("RDMA/hns: Add atomic support")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Add vlan enable bit for hip08

In order to extend vlan device range, the design add two field of qp
context for checking vlan packet in sender and in recevicer.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Support local invalidate for hip08 in kernel space

This patch adds local invalidate Memory Region (MR) support in the kernel
space driver.

Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Update some fields of qp context

The hip08 hardware has two version. the version id are 0x20 and 0x21
according to the pci revision. It needs to adjust some fields for
extending new features. The specific updates include:

1. Add some fields for supporting new features by enabling some reserved
   fields in 0x20 version.
2. remove some fields which the user is not visiable in order to support
   the extend features.
3. Init some fields with zero.

These updates is compatible with 0x20 version.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Limit extend sq sge num

According to hip08 limit, the buffer size of extend sge needs to be an
integer wqe_sge_buf_page size. For example, the value of sge_shift field
of qp context is greater or equal to eight when buffer page size is 4K
size. The value of sge_shift field of qp context assigned by
hr_qp->sge.sge_cnt.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Update some attributes of the RoCE device

According to the IB protocol definition, the driver needs to show the
correct device information and the information will be queryed by device
attribute.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Configure ecn field of ip header

In order to compatible with the third party RoCE device, The hardware
modify the set method for the ecn field of ip header in new hip08
version. The high 6bit of tclass be assigned for dscp field of packet.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Limit the size of extend sge of sq

The hip08 split two hardware version. The version id are 0x20 and 0x21
according to the PCI revison. The max size of extend sge of sq is limited
to 2M for 0x20 version and 8M for 0x21 version. It may be exceeded to 2M
according to the algorithm that compute the product of wqe count and
extend sge number of every wqe. But the product always less than 8M.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Bugfix for CM test

It will print the warning when the MSB bit of SLID is not zero running
cm_req_handler function that test CM. It needs to fixed zero when test
RoCE device.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Submit bad wr when post send wr exception

When user issues a RDMA read and enables sq inline, it needs to report a
bad wr to user.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Bugfix for reserved qp number

It needs to include two special qps for every port. The hip08 have four
ports and the all reserved qp numbers are eight.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/netlink: Simplify netlink listener existence check

All users of rdma_nl_chk_listeners() are interested to get boolean answer
if netlink socket has listeners, so update all places to boolean function.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Remove unused parameter from ib_modify_qp_is_ok()

The ll parameter is not used in ib_modify_qp_is_ok(), so remove it.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rxe: Remove unused addr_same()

This function is not in use - delete it.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/rxe: avoid srq memory leak

In rxe_queue_init, q and q->buf are allocated. In do_mmap_info, q->ip is
allocated. When error occurs, rxe_srq_from_init and the later error
handler do not free these allocated memories.  This will make memory leak.

Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mthca: Fix error return code in __mthca_init_one()

Fix to return a negative error code from the mthca_cmd_init() error
handling case instead of 0, as done elsewhere in this function.

Fixes: 80fd8238734c ("[PATCH] IB/mthca: Encapsulate command interface init")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/uverbs: Fix RCU annotation for radix slot deference

The uapi radix tree is a write-once data structure protected by kref.
Once we get to the ioctl() fop it is not possible for anything else
to be writing to it, so the access should use rcu_dereference_protected.

Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA: Fix building with CONFIG_MMU=n

The zap_vma_ptes() is declared but not defined on NOMMU kernels, causing a
link error for the newly added uverbs code:

drivers/infiniband/core/uverbs_main.o: In function `uverbs_user_mmap_disassociate':
uverbs_main.c:(.text+0x114c): undefined reference to `zap_vma_ptes'
drivers/infiniband/core/uverbs_main.o: In function `rdma_umap_open':
uverbs_main.c:(.text+0x53c): undefined reference to `zap_vma_ptes'

Since all user access for all of our drivers depend on remapping pages to
user space disable USER_ACCESS when there is no mmu.

Fixes: 5f9794dc94f5 ("RDMA/ucontext: Add a core API for mmaping driver IO memory")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/cma: Introduce and use cma_ib_acquire_dev()

When RDMA CM connect request arrives for IB transport, it already contains
device, port, netdevice (optional).

Instead of traversing all the cma devices, use the cma device already
found by the cma_find_listener() for which a listener id is provided.

iWarp devices doesn't need to derive RoCE GIDs, therefore drop RoCE
specific checks from cma_acquire_dev() and rename it to
cma_iw_acquire_dev().

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/cma: Introduce and use cma_acquire_dev_by_src_ip()

Light weight version of cma_acquire_dev() just for binding with rdma
device based on source IP(v4/v6) address.

This simplifies cma_acquire_dev() to avoid listen_id specific checks and
also for subsequent simplification for IB vs iWarp.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/cma: Allow accepting requests for multi port rdma device

When IP failover is used between multiple ports of a given rdma device,
allow accepting CM requests from either of the ports.  This is applicable
for IPv4 and IPv6 non link local addressing scheme.

IPv6 link local addresses are bound. IP failover requests for listen
cm_ids bound to specific netdev interfaces cannot be supported.
(Similar to traditional sockets).

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Use VL15 for SM packets

Subnet Management Packets (SMP) should exclusively use VL15 and their SL
is ignored (IBTA v1.3, Section 3.5.8.2). Therefore, when an SMP is posted,
the SL in the address handle can be set to 0 by a user
application. Consequently, when an address handle is created by the IB
core, some fields in struct rvt_ah may not be set correctly by using the
SL2SC and SC2VL tables at the time. Subsequently, when the request is post
sent, the incoming swqe may fail the validation check, resulting in the
rejection of the send request.

This patch fixes the problem by using VL15 for any validation, ignoring
the SL in the address handle.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add mtu check for operational data VLs

Since Virtual Lanes BCT credits and MTU are set through separate MADs, we
have to ensure both are valid, and data VLs are ready for transmission
before we allow port transition to Armed state.

Fixes: 5e2d6764a729 ("IB/hfi1: Verify port data VLs credits on transition to Armed")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Ensure ucast_dlid access doesnt exceed bounds

The dlid assignment made by looking into the u_ucast_dlid array does not
do an explicit check for the size of the array. The code path to arrive at
def_port, the index value is long and complicated so its best to just have
an explicit check here.

Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Add static trace for iowait

This patch adds the static trace for resource wait.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Prepare resource waits for dual leg

Current implementation allows each qp to have only one send engine.  As
such, each qp has only one list to queue prebuilt packets when send engine
resources are not available. To improve performance, it is desired to
support multiple send engines for each qp.

This patch creates the framework to support two send engines
(two legs) for each qp for the TID RDMA protocol, which can be easily
extended to support more send engines. It achieves the goal by creating a
leg specific struct, iowait_work in the iowait struct, to hold the
work_struct and the tx_list as well as a pointer to the parent iowait
struct.

The hfi1_pkt_state now has an additional field to record the current legs
work structure and that is now passed to all egress waiters to determine
the leg that needs to wait via a new iowait helper.  The APIs are adjusted
to use the new leg specific struct as required.

Many new and modified helpers are added to support this change.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/rdmavt: Rename check_send_wqe as setup_wqe

The driver-provided function check_send_wqe allows the hardware driver to
check and set up the incoming send wqe before it is inserted into the swqe
ring. This patch will rename it as setup_wqe to better reflect its
usage. In addition, this function is only called when all setup is
complete in rdmavt.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: remove set but not used variable 'dseg'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_v2_post_send':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:194:35: warning:
 variable 'dseg' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/qedr: Remove enumerated type qed_roce_ll2_tx_dest

Clang warns when one enumerated type is explicitly converted to another.

drivers/infiniband/hw/qedr/qedr_roce_cm.c:198:28: warning: implicit
conversion from enumeration type 'enum qed_roce_ll2_tx_dest' to
different enumeration type 'enum qed_ll2_tx_dest' [-Wenum-conversion]
        ll2_tx_pkt.tx_dest = pkt->tx_dest;
                           ~ ~~~~~^~~~~~~
1 warning generated.

Turns out that QED_ROCE_LL2_TX_DEST_NW and QED_ROCE_LL2_TX_DEST_LB are
only used once in the whole tree and QED_ROCE_LL2_TX_DEST_MAX is used
nowhere. Remove them and use the equivalent values from qed_ll2_tx_dest
in their place.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Error path MAD response size is incorrect

If a MAD packet has incorrect header information, the logic uses the reply
path to report the error.  The reply path expects *resp_len to be set
prior to return.  Unfortunately, *resp_len is set to 0 for this path.
This causes an incorrect response packet.

Fix by ensuring that the *resp_len is defaulted to the incoming packet
size (wc->bytes_len - sizeof(GRH)).

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/rxe: replace kvfree with vfree

The buf is allocated by vmalloc_user in the function rxe_queue_init.
So it is better to free it by vfree.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/iser: Fix possible NULL deref at iser_inv_desc()

In case target remote invalidates bogus rkey and signature is not used,
pi_ctx is NULL deref.

The commit also fails the connection on bogus remote invalidation.

Fixes: 59caaed7a72a ("IB/iser: Support the remote invalidation exception")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Enable DEVX on IB

IB has additional protections with SELinux that cannot be extended to the
DEVX domain. SELinux can restrict access to pkeys. The first version of
DEVX blocked IB entirely until this could be understood.

Since DEVX requires CAP_NET_RAW, it supersedes the SELinux restriction and
allows userspace to form arbitrary packets with arbitrary pkeys.

Thus we enable IB for DEVX when CAP_NET_RAW is given.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Enable DEVX white list commands

Enable DEVX white list commands without the need for CAP_NET_RAW.

DEVX uid must exist from the ucontext or the device so that the firmware
will mask unprivileged capabilities.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Manage device uid for DEVX white list commands

Manage device uid for DEVX white list commands.  The created device uid
will be used on white list commands if the user didn't supply its own uid.

This will enable the firmware to filter out non privileged functionality
as of the recognition of the uid.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Expose RAW QP device handles to user space

Expose RAW QP device handles to user space by extending the UHW part of
mlx5_ib_create_qp_resp.

This data is returned only when DEVX context is used where it may be
applicable.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Acquire and release mmap_sem on page range

Currently mmap_sem is read locked while pinning the memory.  In a
multi-threaded application of a process, holding mmap_sem lock creates
contention with other threads who might be either registering memory,
creating QPs or simply doing mmap() as such operations also require to
hold the mmap_sem write lock.

All such operation cannot make forward progress until one memory pin
operation is completed.  It becomes more worse if the memory is unpinned
and/or memory registration is large (in GB range).

Therefore, instead of holding mmap_sem for too long (for whole region
pinning), acquire and release the lock for every few pages.  For example
on x86 with 4K page size, acquire and release mmap_sem for every 2Mbytes
memory chunk.

This allows other competing threads to make progress who might wish to
hold mmap_sem for shorter duration.

When memory registration latency is measured using [1] for memory sizes
ranging from 4K to 48GB, <= 1% or 0.5% degradation is noticed. In many
runs no difference is seen other than run-to-run variance.

In other targeted tests of users with large memory, desired improvements
are seen due to reduced contention of mmap_sem.

[1] https://github.com/paravmellanox/rtool

$ rdma_resource_lat -c 1 -s 48G -a -u L -i 500 -A

It registers pinned memory from 4K to 48GB size with 500 iterations for
each memory size.

$ rdma_resource_lat -c 1 -s 12G -a -u L -i 500 -t 4

4 competing threads pin memory, each of 12GB size with 500 iterations.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: fix spelling mistake "reseved" -> "reserved"

Trivial fix to spelling mistake in dev_err error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/sa: simplify return code logic for ib_nl_send_msg()

rdma_nl_multicast() returns either negative error code
or zero if succeeded. Remove unnecessary ret code checks
and reassignments.

Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/hfi1: Move UnsupportedVL bits definitions to the correct header

The UnsupportedVL SendCtrl register bit information is defined in
the module rather than the chip register header file.

Move the defines to the appropriate header file.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mthca: remove redundant inner check of mdev->mthca_flags

The inner check for mdev->mthca_flags & MTHCA_FLAG_MSI_X is redundant
as this is already true because of the previous identical check in
an outer if statement.  Remove it

Detected by cppcheck:
(warning) Identical inner 'if' condition is always true.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Add MW support for hip08

This patch adds memory window (mw) support in the kernel space.

Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Add enable judgement for UD vlan

According to the hardware modification, the vlan of the UD packet is based
on the ud_vlan_en field of the UD wqe to determine whether to add a vlan
header to the UD packet. The ud_vlan_en field is filled by the driver
according to the net device.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Add CM of vlan device support

This patch mainly sets the vlan_id field in the WC for rdma_listen() to
work over vlan. This is required by ib_init_ah_attr_from_wc() which is
called by the CM REQ handler.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Add atomic support

This patch adds atomic operations for hip08, includes fetchadd and cmpswap
operation.  In order to enable atomic, the driver needs to do the
following steps:

1. Enable the atomic caps for RoCE device
2. Post the wqe context of atomic type
3. Configure the atomic type of mtpt

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Refactor the codes for setting transport opode

Currently the transport opcodes which come from users configuration is set
by similar code. This patch simplifies it.

Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/ulp: Use dev_name instead of ibdev->name

These return the same thing but dev_name is a more conventional use of the
kernel API.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>

RDMA/drivers: Use dev_name instead of ibdev->name

These return the same thing but dev_name is a more conventional use of the
kernel API.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/core: Use dev_name instead of ibdev->name

These return the same thing but dev_name is a more conventional use of the
kernel API.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>

RDMA/drivers: Use dev_err/dbg/etc instead of pr_* + ibdev->name

Kernel convention is that a driver for a subsystem will print using
dev_* on the subsystem's struct device, or with dev_* on the physical
device. Drivers should rarely use a pr_* function.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Use dev_err/dbg/etc instead of pr_* + ibdev->name

Any messages related to a device should be printed with the dev_*
formatters. This provides greater consistency for the user.

The core does not set pr_fmt so this has no significant change.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>

RDMA: Fully setup the device name in ib_register_device

The current code has two copies of the device name, ibdev->dev and
dev_name(&ibdev->dev), and they are setup at different times, which is
very confusing.

Set them both up at the same time and make dev_name() the lead name, which
is the proper use of the driver core APIs. To make it very clear that the
name is not valid until registration pass it in to the
ib_register_device() call rather than messing with ibdev->name directly.

Also the reorganization now checks that dev_name is unique even if it does
not contain a %.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>

RDMA: Fix dependencies for rdma_user_mmap_io

The mlx4 driver produces a link error when it is configured
as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m:

drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap':
main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io'

The same function is called from mlx5, which already has a
dependency to ensure we can call it, and from hns, which
appears to suffer from the same problem.

This adds the same dependency that mlx5 uses to the other two.

Fixes: 6745d356ab39 ("RDMA/hns: Use rdma_user_mmap_io")
Fixes: c282da4109e4 ("RDMA/mlx4: Use rdma_user_mmap_io")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/umem: Fix potential addition overflow

Given a large enough memory allocation, it is possible to wrap the
pinned_vm counter.  Check for addition overflow to prevent such
eventualities.

Fixes: 40ddacf2dda9 ("RDMA/umem: Don't hold mmap_sem for too long")
Reported-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/umem: Minor optimizations

Noticed while reviewing commit d4b4dd1b9706 ("RDMA/umem: Do not use
current->tgid to track the mm_struct") patch.  Why would we take a lock,
adjust a protected variable, drop the lock, and *then* check the input
into our protected variable adjustment?  Then we have to take the lock
again on our error unwind.  Let's just check the input early and skip
taking the locks needlessly if the input isn't valid.

It was also noticed that we set mm = current->mm, we then never modify
mm, but we still go back and reference current->mm a number of times
needlessly.  Be consistent in using the stored reference in mm.

Signed-off-by: Doug Ledford <dledford@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Set right entry state before releasing reference

Currently add_modify_gid() for IB link layer has followong issue
in cache update path.

When GID update event occurs, core releases reference to the GID
table without updating its state and/or entry pointer.

CPU-0                              CPU-1
------                             -----
ib_cache_update()                    IPoIB ULP
   add_modify_gid()                   [..]
      put_gid_entry()
      refcnt = 0, but
      state = valid,
      entry is valid.
      (work item is not yet executed).
                                   ipoib_create_ah()
                                     rdma_create_ah()
                                        rdma_get_gid_attr() <--
                                    Tries to acquire gid_attr
                                        which has refcnt = 0.
                                    This is incorrect.

GID entry state and entry pointer is provides the accurate GID enty
state. Such fields must be updated with rwlock to protect against
readers and, such fields must be in sane state before refcount can drop
to zero. Otherwise above race condition can happen leading to
use-after-free situation.

Following backtrace has been observed when cache update for an IB port
is triggered while IPoIB ULP is creating an AH.

Therefore, when updating GID entry, first mark a valid entry as invalid
through state and set the barrier so that no callers can acquired
the GID entry, followed by release reference to it.

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 4 PID: 29106 at lib/refcount.c:153 refcount_inc_checked+0x30/0x50
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:refcount_inc_checked+0x30/0x50
RSP: 0018:ffff8802ad36f600 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000008 RDI: ffffffff86710100
RBP: ffff8802d6e60a30 R08: ffffed005d67bf8b R09: ffffed005d67bf8b
R10: 0000000000000001 R11: ffffed005d67bf8a R12: ffff88027620cee8
R13: ffff8802d6e60988 R14: ffff8802d6e60a78 R15: 0000000000000202
FS: 0000000000000000(0000) GS:ffff8802eb200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3ab35e5c88 CR3: 00000002ce84a000 CR4: 00000000000006e0
IPv6: ADDRCONF(NETDEV_CHANGE): ib1: link becomes ready
Call Trace:
rdma_get_gid_attr+0x220/0x310 [ib_core]
? lock_acquire+0x145/0x3a0
rdma_fill_sgid_attr+0x32c/0x470 [ib_core]
rdma_create_ah+0x89/0x160 [ib_core]
? rdma_fill_sgid_attr+0x470/0x470 [ib_core]
? ipoib_create_ah+0x52/0x260 [ib_ipoib]
ipoib_create_ah+0xf5/0x260 [ib_ipoib]
ipoib_mcast_join_complete+0xbbe/0x2540 [ib_ipoib]

Fixes: b150c3862d21 ("IB/core: Introduce GID entry reference counts")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Destroy the DEVX object upon error flow

Upon DEVX object creation the object must be destroyed upon a follows
error flow.

Fixes: 7efce3691d33 ("IB/mlx5: Add obj create and destroy functionality")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/uverbs: Free uapi on destroy

Make sure we free struct uverbs_api once we clean the radix tree. It was
allocated by uverbs_alloc_api().

Fixes: 9ed3e5f44772 ("IB/uverbs: Build the specs into a radix tree at runtime")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

iw_cxgb4: Use proper enumerated type in c4iw_bar2_addrs

Clang warns when one enumerated type is implicitly converted to another.

drivers/infiniband/hw/cxgb4/qp.c:287:8: warning: implicit conversion
from enumeration type 'enum t4_bar2_qtype' to different enumeration type
'enum cxgb4_bar2_qtype' [-Wenum-conversion]
                                                 T4_BAR2_QTYPE_EGRESS,
                                                 ^~~~~~~~~~~~~~~~~~~~

c4iw_bar2_addrs expects a value from enum cxgb4_bar2_qtype so use the
corresponding values from that type so Clang is satisfied without changing
the meaning of the code.

T4_BAR2_QTYPE_EGRESS = CXGB4_BAR2_QTYPE_EGRESS = 0
T4_BAR2_QTYPE_INGRESS = CXGB4_BAR2_QTYPE_INGRESS = 1

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/mlx5: Remove superfluous version print

When profiles were introduced to MLX5 IB an unneeded version print when
creating an MLX5 IB device was added. Remove the print, we still have a
printk for driver version in mlx5_ib_add().

Fixes: 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/usnic: fix spelling mistake "unvalid" -> "invalid"

Trivial fix to spelling mistake in usnic_err error message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set valid umem bit on DEVX

Set valid umem bit on DEVX commands that use umem.
This will enforce the umem usage by the firmware and not the 'pas' info.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of TD commands

Set uid as part of TD commands so that the firmware can
manage the TD object in a secured way.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of XRCD commands

Set uid as part of XRCD commands so that the firmware can manage the
XRCD object in a secured way.

That will enable using an XRCD that was created by verbs application
to be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of CQ creation

Set uid as part of CQ creation so that the firmware can manage the
CQ object in a secured way.

The uid for the destroy and the modify commands is set by mlx5_core.

This will enable using a CQ that was created by verbs application to
be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid upon PD allocation

Set uid as part of PD allocation, this uid is used for other mlx5
objects upon calling the firmware.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of RQT commands

Set uid as part of RQT commands so that the firmware can manage the
RQT object in a secured way.

That will enable using an RQT that was created by verbs application
to be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of TIS commands

Set uid as part of TIS commands so that the firmware can manage the
TIS object in a secured way.

That will enable using a TIS that was created by verbs application
to be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of TIR commands

Set uid as part of TIR commands so that the firmware can manage the
TIR object in a secured way.

That will enable using a TIR that was created by verbs application to
be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of MCG commands

Set uid as part of MCG commands so that the firmware can manage the
MCG object in a secured way.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of DCT commands

Set uid as part of DCT create command so that the firmware can
manage the DCT object in a secured way.

The uid for the destroy and drain commands are set by mlx5_core.

That will enable using a DCT that was created by verbs application
to be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of SRQ commands

Set uid as part of SRQ create command so that the firmware can manage
the SRQ object in a secured way.

The uid for the destroy and modify commands are set by mlx5_core.

That will enable using a SRQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of SQ commands

Set uid as part of SQ commands so that the firmware can manage the
SQ object in a secured way.

The uid for the destroy command is set by mlx5_core.

This will enable using an SQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of RQ commands

Set uid as part of RQ commands so that the firmware can manage the
RQ object in a secured way.

The uid for the destroy command is set by mlx5_core.

This will enable using an RQ that was created by verbs application to
be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Set uid as part of QP creation

Set uid as part of QP creation so that the firmware can manage the
QP object in a secured way.

The uid for the destroy and the modify commands is set by mlx5_core.

This will enable using a QP that was created by verbs application to
be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Use uid as part of PD commands

Use uid as part of PD commands so that the firmware can manage the
PD object in a secured way.

For example when a QP is created its uid must match the CQ uid which it
uses.

Next patches in this series will use the uid from the PD, then will come
a patch to set the uid on the PD so that all objects will be properly
work in one change.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge branch 'mellanox/mlx5-next' into rdma.git for-next

From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git

This is required to resolve dependencies of the next series of RDMA
patches.

* branch 'mellanox/mlx5-next':
  net/mlx5: Update mlx5_ifc with DEVX UID bits
  net/mlx5: Set uid as part of DCT commands
  net/mlx5: Set uid as part of SRQ commands
  net/mlx5: Set uid as part of SQ commands
  net/mlx5: Set uid as part of RQ commands
  net/mlx5: Set uid as part of QP commands
  net/mlx5: Set uid as part of CQ commands

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: Update mlx5_ifc with DEVX UID bits

Add DEVX information to WQ, SRQ, CQ, TIR, TIS, QP,
RQ, XRCD, PD, MKEY and MCG.

Each object that is created/destroyed/modified via verbs will
be stamped with a UID based on its user context. This is already
done for DEVX objects commands.

This will enable the firmware to enforce the usage of kernel objects
from the DEVX flow by validating that the same UID is used and the
resources are really related to the same user.

The addition of *_valid fields are needed to distinguish
how various addresses are passed.

For non-DEVX callers, all those fields will be zero.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>