Xingyu Wu [Tue, 11 Oct 2022 02:51:48 +0000 (10:51 +0800)]
arch:dts:starfive:Add 'sound-dai' function in hdmi node
Add new audio device in audio card about hdmi and i2s.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Tue, 11 Oct 2022 02:46:07 +0000 (10:46 +0800)]
gpu:drm:Add audio function in inno hdmi
Could playback audio through HDMI.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Tue, 11 Oct 2022 02:32:46 +0000 (10:32 +0800)]
arch:dts:starfive:Change mclk_ext pin
Change mclk_ext pin from GPIO61 to GPIO4.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Tue, 11 Oct 2022 02:29:59 +0000 (10:29 +0800)]
arch:dts:starfive:Modify i2stx_4ch0 node
Add mclk_ext clock and enable i2stx_4ch0 status.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Tue, 11 Oct 2022 02:19:27 +0000 (10:19 +0800)]
sound:starfive:Add I2S driver
Add I2S driver for starfive.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
andy.hu [Fri, 30 Sep 2022 03:21:39 +0000 (03:21 +0000)]
Merge branch 'CR_2233_CMA_515_samin.guo' into 'jh7110-5.15.y-devel'
CR_2233_CMA_515_samin.guo：riscv:dts:jh7110: Modify CMA reserved space to better support 2G DRAM
See merge request sdk/linux!509
samin [Mon, 26 Sep 2022 04:33:27 +0000 (12:33 +0800)]
riscv:dts:jh7110: Modify CMA reserved space to better support 2G DRAM
When the DDR is 2G (0x40000000-0xc0000000), it may cause address usage
problems.
Signed-off-by: samin <samin.guo@starfivetech.com>
andy.hu [Fri, 23 Sep 2022 08:28:22 +0000 (08:28 +0000)]
Merge branch 'CR_1849_DMA_walker.chen' into 'jh7110-5.15.y-devel'
CR_1849_DMA_walker.chen
See merge request sdk/linux!483
andy.hu [Fri, 23 Sep 2022 07:03:25 +0000 (07:03 +0000)]
Merge branch 'CR_2180_evb_515_DRM_WESTON_keith.zhao' into 'jh7110-5.15.y-devel'
CR_2180:riscv:driver:drm: Weston-GPU
See merge request sdk/linux!501
andy.hu [Fri, 23 Sep 2022 06:59:39 +0000 (06:59 +0000)]
Merge branch 'CR_2162_GPU_shanlong.li' into 'jh7110-5.15.y-devel'
Cr 2162 gpu shanlong.li
See merge request sdk/linux!499
andy.hu [Fri, 23 Sep 2022 06:57:42 +0000 (06:57 +0000)]
Merge branch 'CR_2156_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_2156_v4l2_515_changhuang.liang v4l2: modify vin clk base on pll2 change
See merge request sdk/linux!491
andy.hu [Fri, 23 Sep 2022 06:46:17 +0000 (06:46 +0000)]
Merge branch 'CR_2127_PCIe_515_Kevin.xie' into 'jh7110-5.15.y-devel'
CR 2127 drivers: pci: Support 64bit prefetchable MMIO range.
See merge request sdk/linux!503
andy.hu [Fri, 23 Sep 2022 06:44:23 +0000 (06:44 +0000)]
Merge branch 'CR_2123_515_SPDIF_mclkext_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2123_515_spdif_mclkext_xingyu.wu
See merge request sdk/linux!489
shanlong.li [Fri, 23 Sep 2022 06:37:27 +0000 (23:37 -0700)]
driver:gpu: gpu driver change to release
gpu driver change to release
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
andy.hu [Fri, 23 Sep 2022 06:35:35 +0000 (06:35 +0000)]
Merge branch 'CR_1737_SEC_jiajie.ho' into 'jh7110-5.15.y-devel'
CR_1737:crypto:starfive: Fixed AEAD tag generation and verification
See merge request sdk/linux!505
shanlong.li [Thu, 15 Sep 2022 03:01:51 +0000 (20:01 -0700)]
driver:GPU:set the gpu frequency to 594Mhz
set the gpu frequency to 594Mhz
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
shanlong.li [Thu, 15 Sep 2022 02:59:44 +0000 (19:59 -0700)]
dts:GPU: add core clk
add core clk
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
jiajie.ho [Thu, 22 Sep 2022 04:31:49 +0000 (12:31 +0800)]
CR_1737:crypto:starfive: Fixed AEAD tag generation and verification
Added support in AES GCM and CCM mode for various tag length and
tag verification for non-AES blocksize aligned text.
Signed-off-by: jiajie.ho <jiajie.ho@starfivetech.com>
keith.zhao [Wed, 21 Sep 2022 01:56:46 +0000 (09:56 +0800)]
riscv:driver:drm: Weston-GPU
add format_mod_supported interface for userspace
Signed-off-by: keith <keith.zhao@starfivetech.com>
Kevin.xie [Tue, 20 Sep 2022 09:11:49 +0000 (17:11 +0800)]
drivers: pci: Support 64bit prefetchable MMIO range.
Verification has been completed on NVIDIA GT710 with modetest.
Signed-off-by: Kevin.xie <kevin.xie@starfivetech.com>
andy.hu [Fri, 16 Sep 2022 09:00:59 +0000 (09:00 +0000)]
Merge branch 'CR_2030_5.15_evb_vout_shengyang.chen' into 'jh7110-5.15.y-devel'
CR_2030_5.15_2_riscv:dts:drm
See merge request sdk/linux!497
andy.hu [Fri, 16 Sep 2022 08:35:07 +0000 (08:35 +0000)]
Merge branch 'CR_2165_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_2165_v4l2_515_changhuang.liang v4l2: modify imx219 vertical crop value
See merge request sdk/linux!495
andy.hu [Fri, 16 Sep 2022 08:31:56 +0000 (08:31 +0000)]
Merge branch 'CR_2155_515_Timer_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2155_515_Timer_Xingyu.Wu
See merge request sdk/linux!493
andy.hu [Fri, 16 Sep 2022 08:05:11 +0000 (08:05 +0000)]
Merge branch 'CR_1706_SEC_jiajie.ho' into 'jh7110-5.15.y-devel'
CR_1706:crypto:starfive: Add buffer alignment for AES driver
See merge request sdk/linux!394
andy.hu [Fri, 16 Sep 2022 08:03:38 +0000 (08:03 +0000)]
Merge branch 'CR_2135_SEC_515_william.qiu' into 'jh7110-5.15.y-devel'
CR_2135_515:sec_dma:pl080:remove arm primecell compatible
See merge request sdk/linux!485
andy.hu [Fri, 16 Sep 2022 04:25:21 +0000 (04:25 +0000)]
Merge branch 'CR_1922_evb_515_DRM_hdmi_720x480_colorIssue_keith.zhao' into 'jh7110-5.15.y-devel'
CR_1922:riscv:driver:drm: HDMI display
See merge request sdk/linux!488
andy.hu [Fri, 16 Sep 2022 04:23:16 +0000 (04:23 +0000)]
Merge branch 'CR_2111_515_Clocktree_yaml_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2111_515_Documentation:Add starfive clock yaml
See merge request sdk/linux!473
shengyang.chen [Thu, 15 Sep 2022 10:52:27 +0000 (18:52 +0800)]
riscv:dts:drm
update changing of dts compatible value
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
Walker Chen [Fri, 9 Sep 2022 14:07:55 +0000 (22:07 +0800)]
CR_1849_DMA_515: Stop dma channel
DMA: fixed some issue.
1. Removed some invalid function such as dma_tasklet.
2. Export axi_dma_cyclic_stop function to other driver.
3. Setting timeout 200 ms to poll the status of dma
when one channel is disabled.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
changhuang.liang [Thu, 15 Sep 2022 08:59:14 +0000 (16:59 +0800)]
v4l2: modify imx219 vertical crop value
modify imx219 vertical crop value
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Xingyu Wu [Wed, 14 Sep 2022 07:39:23 +0000 (15:39 +0800)]
sound:soc:wm8960:Change delay time when first capture
Change delay time from 800 to 1000 when first capture.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Wed, 14 Sep 2022 06:11:39 +0000 (14:11 +0800)]
sound:starfive:spdif:Use mclk_inner about 11k and 22k
Use mclk_inner clock from 1188m PLL2
will be better about 11k and 22k.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Tue, 13 Sep 2022 09:29:02 +0000 (17:29 +0800)]
sound:starfive:pdm:Use mclk_ext external clock
Use mclk_ext instead of mclk_inner.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Thu, 8 Sep 2022 08:40:21 +0000 (16:40 +0800)]
sound:starfive:spdif:Use extrenal mclk
Use extrenal mclk_ext instead of mclk_inner.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Ley Foon Tan [Mon, 12 Sep 2022 02:09:27 +0000 (02:09 +0000)]
clocksource: starfive: Remove struct reset_control
Remove struct reset_control from starfive_clkevt struct, uses local
struct reset_control instead.
Signed-off-by: Ley Foon Tan <leyfoon.tan@linux.starfivetech.com>
Ley Foon Tan [Mon, 12 Sep 2022 01:43:59 +0000 (01:43 +0000)]
dt-bindings: timer: JH7110: Update reset information
Added reset parameters to binding document and update clock description.
Signed-off-by: Ley Foon Tan <leyfoon.tan@linux.starfivetech.com>
Xingyu Wu [Thu, 15 Sep 2022 01:57:21 +0000 (09:57 +0800)]
dt-bindings:timer:Modify the name
Rename to 'starfive,jh7110-timers.yaml'.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
changhuang.liang [Thu, 15 Sep 2022 01:35:41 +0000 (09:35 +0800)]
v4l2: modify vin clk base on pll2 change
pll2 frequency change to 1188M so vin clock will change.
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
Xingyu Wu [Wed, 7 Sep 2022 06:35:03 +0000 (14:35 +0800)]
Documentation:devicetree:clock:Add starfive clock yaml
Add starfive clkgen, vout and isp yaml file.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
William Qiu [Tue, 13 Sep 2022 10:20:15 +0000 (18:20 +0800)]
dma:pl080:modify vic7110 function name to jh7110
modify vic7110 function name to jh7110
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
William Qiu [Tue, 13 Sep 2022 10:18:53 +0000 (18:18 +0800)]
bt-binding:pl080:remove arm pl080 compatible
remove arm pl080 compatible and add support
for starfive jh7110-pl080
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Xingyu Wu [Thu, 8 Sep 2022 08:34:21 +0000 (16:34 +0800)]
dts:starfive:pinctrl:Add mclk_ext pin
Add mclk_ext pin and it's rate is 12.288m.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
keith.zhao [Tue, 13 Sep 2022 06:55:44 +0000 (14:55 +0800)]
riscv:driver:drm: HDMI display
1、fix 720x480 display
2、improve eye diagram parameters
Signed-off-by: keith <keith.zhao@starfivetech.com>
andy.hu [Fri, 9 Sep 2022 10:15:47 +0000 (10:15 +0000)]
Merge branch 'CR_2124_evb_515_DRM_GST_4K_keith.zhao' into 'jh7110-5.15.y-devel'
CR 2124 riscv:linux:vout:hdmi gst
See merge request sdk/linux!481
keith.zhao [Fri, 9 Sep 2022 09:48:54 +0000 (17:48 +0800)]
riscv:linux:vout:hdmi gst
delete file by mistake submit
Signed-off-by: keith <keith.zhao@starfivetech.com>
keith.zhao [Fri, 9 Sep 2022 09:38:09 +0000 (17:38 +0800)]
riscv:linux:vout:hdmi gst
1、fix CR 2124 gst play 4K video issue
2、remove unused code caused by pll switches 1188
Signed-off-by: keith <keith.zhao@starfivetech.com>
andy.hu [Fri, 9 Sep 2022 09:05:29 +0000 (09:05 +0000)]
Merge branch 'CR_2121_CAN_515_william.qiu' into 'jh7110-5.15.y-devel'
Cr 2121 can 515 william.qiu
See merge request sdk/linux!477
andy.hu [Fri, 9 Sep 2022 08:31:12 +0000 (08:31 +0000)]
Merge branch 'CR_1448_5.15_evb_vout_shengyang.chen' into 'jh7110-5.15.y-devel'
CR_1448_5.15_riscv:linux:drm:
See merge request sdk/linux!479
andy.hu [Fri, 9 Sep 2022 08:30:11 +0000 (08:30 +0000)]
Merge branch 'CR_2119_evb_515_DRM_mipi_new_panel_keith.zhao' into 'jh7110-5.15.y-devel'
CR_2119: riscv:linux:vout:mipi
See merge request sdk/linux!475
shengyang.chen [Fri, 9 Sep 2022 06:35:47 +0000 (14:35 +0800)]
riscv:linux:drm:
update code after pll switch to 1188m
based on new pll config, fix rgb bug caused by old pll
------------------------------------------------------------
update code after review
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Fri, 9 Sep 2022 03:51:16 +0000 (11:51 +0800)]
riscv:linux:drm:
update code after pll switch to 1188m
based on new pll config, fix rgb bug caused by old pll
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
William Qiu [Fri, 9 Sep 2022 04:39:43 +0000 (12:39 +0800)]
dt-bindings:SDIO:Add bindings for StarFive JH7110 SDIO
Add bindings for StarFive JH7110 SDIO
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
William Qiu [Fri, 9 Sep 2022 04:39:12 +0000 (12:39 +0800)]
SDIO:starfive:Add the starfive private driver for SDIO
Add the starfive private driver for SDIO
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
William Qiu [Fri, 9 Sep 2022 04:38:37 +0000 (12:38 +0800)]
defconfig:starfive:Add support for SDIO's starfive private driver
Add support for SDIO's starfive private driver
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
William Qiu [Fri, 9 Sep 2022 04:37:56 +0000 (12:37 +0800)]
dts:starfive:modify SDIO config
modify SDIO config
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
keith.zhao [Thu, 8 Sep 2022 07:07:41 +0000 (15:07 +0800)]
riscv:linux:vout:mipi
add 3 new mipi panel support
Signed-off-by: keith <keith.zhao@starfivetech.com>
andy.hu [Wed, 7 Sep 2022 07:49:23 +0000 (07:49 +0000)]
Merge branch 'CR_2015_SEC_jiajie.ho' into 'jh7110-5.15.y-devel'
CR_2015:crypto:starfive: Remove DES/TDES support
See merge request sdk/linux!427
andy.hu [Wed, 7 Sep 2022 07:31:30 +0000 (07:31 +0000)]
Merge branch 'CR_1946_515_GMAC_yanhong.wang' into 'jh7110-5.15.y-devel'
Cr 1946 515 gmac yanhong.wang
See merge request sdk/linux!416
andy.hu [Wed, 7 Sep 2022 07:22:30 +0000 (07:22 +0000)]
Merge branch 'CR_2084_CAN_515_william.qiu' into 'jh7110-5.15.y-devel'
CR_2084_515:dt-blinding:canfd:set can1 to canfd
See merge request sdk/linux!465
andy.hu [Wed, 7 Sep 2022 06:59:23 +0000 (06:59 +0000)]
Merge branch 'CR_1984_5.15_evb_mipidsi_atomic_shengyang.chen' into 'jh7110-5.15.y-devel'
CR_1984_5.15_riscv:linux:drm
See merge request sdk/linux!447
andy.hu [Wed, 7 Sep 2022 06:33:03 +0000 (06:33 +0000)]
Merge branch 'CR_2042_evb_515_DRM_Debian_Issue_keith.zhao' into 'jh7110-5.15.y-devel'
CR_2042:riscv:driver:drm:Debian
See merge request sdk/linux!462
andy.hu [Wed, 7 Sep 2022 06:04:54 +0000 (06:04 +0000)]
Merge branch 'CR_2076_515_I2S_AC108_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2076 & 2077 & 2078 & 2075 :I2S and AC108
See merge request sdk/linux!469
andy.hu [Wed, 7 Sep 2022 06:02:24 +0000 (06:02 +0000)]
Merge branch 'CR_2021_dts_hal.feng' into 'jh7110-5.15.y-devel'
Cr 2021 dts hal.feng
See merge request sdk/linux!442
andy.hu [Wed, 7 Sep 2022 05:57:40 +0000 (05:57 +0000)]
Merge branch 'CR_2030_5.15_evb_vout_shengyang.chen' into 'jh7110-5.15.y-devel'
Cr 2030 5.15 evb vout shengyang.chen
See merge request sdk/linux!444
andy.hu [Wed, 7 Sep 2022 03:48:03 +0000 (03:48 +0000)]
Merge branch 'CR_2102_515_Clocktree_1188m_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2102_515_Clocktree_1188m_Xingyu.Wu
See merge request sdk/linux!466
andy.hu [Wed, 7 Sep 2022 03:43:01 +0000 (03:43 +0000)]
Merge branch 'CR_2026_compatible_5.15_ziv.xu' into 'jh7110-5.15.y-devel'
CR_2026_compatible_standard_515
See merge request sdk/linux!459
andy.hu [Wed, 7 Sep 2022 03:39:58 +0000 (03:39 +0000)]
Merge branch 'CR_2071_compatible_standard_515_walker.chen' into 'jh7110-5.15.y-devel'
CR_2071_audio_compatible_standard_515
See merge request sdk/linux!450
andy.hu [Wed, 7 Sep 2022 03:37:01 +0000 (03:37 +0000)]
Merge branch 'CR_2034_515_compatible_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_2034_515 compatible xingyu.wu
See merge request sdk/linux!448
andy.hu [Wed, 7 Sep 2022 03:33:41 +0000 (03:33 +0000)]
Merge branch 'CR_2004_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_2004_v4l2_515_changhuang.liang v4l2: modify v4l2 compatible name
See merge request sdk/linux!428
andy.hu [Wed, 7 Sep 2022 03:29:08 +0000 (03:29 +0000)]
Merge branch 'CR_2002_SDIO.CAN.SEC_515_william.qiu' into 'jh7110-5.15.y-devel'
CR_2002_515:dt-bindings:william:modify sdio\can\sec compatible
See merge request sdk/linux!425
andy.hu [Wed, 7 Sep 2022 03:26:42 +0000 (03:26 +0000)]
Merge branch 'CR_1962_515_pinctrl_sf_jianlong' into 'jh7110-5.15.y-devel'
CR_1962 pinctrl: starfive: replace sf to starfive
See merge request sdk/linux!418
Xingyu Wu [Mon, 5 Sep 2022 09:31:08 +0000 (17:31 +0800)]
clk:starfive:Set pll2 default rate to 1188m
Change pll2_out default rate from 1228.8m to 1188m.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Tue, 6 Sep 2022 14:04:49 +0000 (22:04 +0800)]
sound:wm8960:pdm:Fix some noise with first capture
Use delay to fix some noise with first capture.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
William Qiu [Tue, 6 Sep 2022 08:47:35 +0000 (16:47 +0800)]
dts:starfive:Set can1 to canfd
Set can0 to can and set can1 to canfd
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Xingyu Wu [Mon, 5 Sep 2022 09:25:15 +0000 (17:25 +0800)]
sound:codecs:ac108:Support 32k sampling rate
ac108:Support 32k sampling rate.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Ziv.Xu [Mon, 5 Sep 2022 05:33:47 +0000 (13:33 +0800)]
linux:drivers: revise 'stf' to 'starfive'
revise "stf" to "starfive" for PCIE, CPUfreq, CPUidle, PMIC driver.
Signed-off-by: Ziv.Xu <Ziv.Xu@starfivetech.com>
keith.zhao [Mon, 5 Sep 2022 07:54:17 +0000 (15:54 +0800)]
riscv:driver:drm:Debian
1. fix issue: Debian enter sleep ,cause drm hung
Signed-off-by: keith <keith.zhao@starfivetech.com>
Xingyu Wu [Mon, 5 Sep 2022 06:34:47 +0000 (14:34 +0800)]
sound:codecs:ac108:Change default volume
ac108:Change default volume and make it louder.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Ziv.Xu [Mon, 5 Sep 2022 05:19:06 +0000 (13:19 +0800)]
riscv:dts: revise compatible value for PCIE/CPUfreq/idle/PMIC
revise compatible values for PCIE/CPUfreq/idle/PMIC
Signed-off-by: Ziv.Xu <Ziv.Xu@starfivetech.com>
Xingyu Wu [Mon, 5 Sep 2022 05:59:34 +0000 (13:59 +0800)]
sound:codecs:ac108:Support 16bit format
ac108:Support 16bit format with capture.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
shengyang.chen [Fri, 2 Sep 2022 02:35:30 +0000 (10:35 +0800)]
riscv:linux:drm
remove some useless process after review
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
Walker Chen [Thu, 1 Sep 2022 14:01:03 +0000 (22:01 +0800)]
CR_2071_audio_compatible_standard_515
Standardization naming of compatible for device id and dts
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
shengyang.chen [Thu, 1 Sep 2022 10:36:18 +0000 (18:36 +0800)]
riscv:linux:drm
fix mipi color problem
ensure stability of modetest
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
Xingyu Wu [Thu, 1 Sep 2022 07:13:04 +0000 (15:13 +0800)]
spi:starfive:Modify compatible name
Modify compatible name to 'starfive,jh7110-spi-pl022'.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Thu, 1 Sep 2022 06:13:53 +0000 (14:13 +0800)]
sound:i2s:Modify compatible name
Modify compatible name to 'starfive,jh7110-i2stx-4ch1'.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Thu, 1 Sep 2022 02:54:07 +0000 (10:54 +0800)]
watchdog:starfive:Modify compattible name
Modify compatible name to 'starfive,jh7110-wdt'.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Thu, 1 Sep 2022 01:58:15 +0000 (09:58 +0800)]
sound:starfive:spdif:Modify compatible name
1.Modify compatible name to 'starfive,jh7110-spdif'.
2.Remove spdif-receiver node.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Wed, 31 Aug 2022 09:49:03 +0000 (17:49 +0800)]
sound:starfive:pwmdac:Modify compatible name
Modify compatible name to 'starfive,jh7110-pwmdac'.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Xingyu Wu [Wed, 31 Aug 2022 08:31:41 +0000 (16:31 +0800)]
clocksource:timer:Modify compatible name
Modify compatible name to 'starfive,jh7110-timers'.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
shengyang.chen [Wed, 31 Aug 2022 10:02:31 +0000 (18:02 +0800)]
riscv:linux:drm
code logic rollback for stable problem
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
andy.hu [Wed, 31 Aug 2022 08:36:27 +0000 (08:36 +0000)]
Merge branch 'CR_2014_v4l2_515_changhuang.liang' into 'jh7110-5.15.y-devel'
CR_2014_v4l2_515_changhuang.liang v4l2: modify reset cause failed
See merge request sdk/linux!438
shengyang.chen [Wed, 31 Aug 2022 08:17:32 +0000 (16:17 +0800)]
riscv:linux:drm
replace driver compatible value for vout
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
shengyang.chen [Wed, 31 Aug 2022 08:14:50 +0000 (16:14 +0800)]
riscv:dts:drm
replace dts compatible value for vout
Signed-off-by: shengyang.chen<shengyang.chen@starfivetech.com>
andy.hu [Wed, 31 Aug 2022 08:05:04 +0000 (08:05 +0000)]
Merge branch 'CR_2018_TDM_515_walker.chen' into 'jh7110-5.15.y-devel'
CR_2018_TDM_Playback_and_Record_Simultaneously
See merge request sdk/linux!436
andy.hu [Wed, 31 Aug 2022 07:51:24 +0000 (07:51 +0000)]
Merge branch 'CR_2031_evb_515_DRM_hdmi_720x480_keith.zhao' into 'jh7110-5.15.y-devel'
CR_2031: riscv:driver:drm: HDMI display
See merge request sdk/linux!440
andy.hu [Wed, 31 Aug 2022 07:42:35 +0000 (07:42 +0000)]
Merge branch 'CR_1941_515_I2S_16b_Xingyu.Wu' into 'jh7110-5.15.y-devel'
CR_1941_515_i2s_16b xingyu.wu
See merge request sdk/linux!434
andy.hu [Wed, 31 Aug 2022 07:34:33 +0000 (07:34 +0000)]
Merge branch 'CR_1978_CAN_515_william.qiu' into 'jh7110-5.15.y-devel'
CR_1978_515:dtb:canfd:add a dtb file for canfd
See merge request sdk/linux!430
Hal Feng [Tue, 30 Aug 2022 12:40:37 +0000 (20:40 +0800)]
dma: dw-axi-dmac: Standardize property "compatible"
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Tue, 30 Aug 2022 12:34:22 +0000 (20:34 +0800)]
i2c: designware: Delete redundant code
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Hal Feng [Tue, 30 Aug 2022 11:55:32 +0000 (19:55 +0800)]
pwm: pwm-starfive-ptc: Standardize property "compatible"
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
projects / platform / kernel / linux-starfive.git / log