review.tizen.org Git - platform/kernel/linux-rpi.git/log

powerpc/feature: Fix CPU_FTRS_ALWAYS by removing CPU_FTRS_GENERIC_32

[ Upstream commit 78665179e569c7e1fe102fb6c21d0f5b6951f084 ]

On 8xx, we get the following features:

[    0.000000] cpu_features      = 0x0000000000000100
[    0.000000]   possible        = 0x0000000000000120
[    0.000000]   always          = 0x0000000000000000

This is not correct. As CONFIG_PPC_8xx is mutually exclusive with all
other configurations, the three lines should be equal.

The problem is due to CPU_FTRS_GENERIC_32 which is taken when
CONFIG_BOOK3S_32 is NOT selected. This CPU_FTRS_GENERIC_32 is
pointless because there is no generic configuration supporting
all 32 bits but book3s/32.

Remove this pointless generic features definition to unbreak the
calculation of 'possible' features and 'always' features.

Fixes: 76bc080ef5a3 ("[POWERPC] Make default cputable entries reflect selected CPU family")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/76a85f30bf981d1aeaae00df99321235494da254.1604426550.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Avoid broken GCC __attribute__((optimize))

[ Upstream commit a7223f5bfcaeade4a86d35263493bcda6c940891 ]

Commit 7053f80d9696 ("powerpc/64: Prevent stack protection in early
boot") introduced a couple of uses of __attribute__((optimize)) with
function scope, to disable the stack protector in some early boot
code.

Unfortunately, and this is documented in the GCC man pages [0],
overriding function attributes for optimization is broken, and is only
supported for debug scenarios, not for production: the problem appears
to be that setting GCC -f flags using this method will cause it to
forget about some or all other optimization settings that have been
applied.

So the only safe way to disable the stack protector is to disable it
for the entire source file.

[0] https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html

Fixes: 7053f80d9696 ("powerpc/64: Prevent stack protection in early boot")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[mpe: Drop one remaining use of __nostackprotector, reported by snowpatch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201028080433.26799-1-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix broken riscv build

[ Upstream commit 6016df8fe874e1cf36f6357d71438b384198ce06 ]

The selftests/bpf Makefile includes system include directories from
the host, when building BPF programs. On RISC-V glibc requires that
__riscv_xlen is defined. This is not the case for "clang -target bpf",
which messes up __WORDSIZE (errno.h -> ... -> wordsize.h) and breaks
the build.

By explicitly defining __risc_xlen correctly for riscv, we can
workaround this.

Fixes: 167381f3eac0 ("selftests/bpf: Makefile fix "missing" headers on build with -idirafter")
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Link: https://lore.kernel.org/bpf/20201118071640.83773-2-bjorn.topel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: mxs: fix reference leak in mxs_spi_probe

[ Upstream commit 03fc41afaa6549baa2dab7a84e1afaf5cadb5b18 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in mxs_spi_probe, so we should fix it.

Fixes: b7969caf41a1d ("spi: mxs: implement runtime pm")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201106012421.95420-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb/max3421: fix return error code in max3421_probe()

[ Upstream commit 5a569343e8a618dc73edebe0957eb42f2ab476bd ]

retval may be reassigned to 0 after max3421_of_vbus_en_pin(),
if allocate memory failed after this, max3421_probe() cann't
return ENOMEM, fix this by moving assign retval afther max3421_probe().

Fixes: 721fdc83b31b ("usb: max3421: Add devicetree support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20201117061500.3454223-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: core: Fix null pointer access when parsing MHI configuration

[ Upstream commit f4d0b39c842585c74bce8f8a80553369181b72df ]

Functions parse_ev_cfg() and parse_ch_cfg() access mhi_cntrl->mhi_dev
before it is set in function mhi_register_controller(),
use cntrl_dev instead of mhi_dev.

Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers")
Signed-off-by: Carl Yin <carl.yin@quectel.com>
Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: mhi: core: Remove double locking from mhi_driver_remove()

[ Upstream commit 9b627c25e70816a5e1dca940444b5029065b4d60 ]

There is double acquisition of the pm_lock from mhi_driver_remove()
function. Remove the read_lock_bh/read_unlock_bh calls for pm_lock
taken during a call to mhi_device_put() as the lock is acquired
within the function already. This will help avoid a potential
kernel panic.

Fixes: 189ff97cca53 ("bus: mhi: core: Add support for data transfer")
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: ads7846 - fix unaligned access on 7845

[ Upstream commit 03e2c9c782f721b661a0e42b1b58f394b5298544 ]

req->sample[1] is not naturally aligned at word boundary, and therefore we
should use get_unaligned_be16() when accessing it.

Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: ads7846 - fix integer overflow on Rt calculation

[ Upstream commit 820830ec918f6c3dcd77a54a1c6198ab57407916 ]

In some rare cases the 32 bit Rt value will overflow if z2 and x is max,
z1 is minimal value and x_plate_ohms is relatively high (for example 800
ohm). This would happen on some screen age with low pressure.

There are two possible fixes:
- make Rt 64bit
- reorder calculation to avoid overflow

The second variant seems to be preferable, since 64 bit calculation on
32 bit system is a bit more expensive.

Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver")
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: ads7846 - fix race that causes missing releases

[ Upstream commit e52cd628a03f72a547dbf90ccb703ee64800504a ]

If touchscreen is released while busy reading HWMON device, the release
can be missed. The IRQ thread is not started because no touch is active
and BTN_TOUCH release event is never sent.

Fixes: f5a28a7d4858f94a ("Input: ads7846 - avoid pen up/down when reading hwmon")
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20201027105416.18773-1-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: include conditionally on CONFIG_INTEL_IOMMU_SVM

[ Upstream commit 68dd9d89eaf56dfab8d46bf25610aa4650247617 ]

Commit 6ee1b77ba3ac ("iommu/vt-d: Add svm/sva invalidate function")
introduced intel_iommu_sva_invalidate() when CONFIG_INTEL_IOMMU_SVM.
This function uses the dedicated static variable inv_type_granu_table
and functions to_vtd_granularity() and to_vtd_size().

These parts are unused when !CONFIG_INTEL_IOMMU_SVM, and hence,
make CC=clang W=1 warns with an -Wunused-function warning.

Include these parts conditionally on CONFIG_INTEL_IOMMU_SVM.

Fixes: 6ee1b77ba3ac ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201115205951.20698-1-lukas.bulwahn@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: intel: SND_SOC_INTEL_KEEMBAY should depend on ARCH_KEEMBAY

[ Upstream commit 9a207228bdf0a4933b794c944d7111564353ea94 ]

The Intel Keem Bay audio module is only present on Intel Keem Bay SoCs.
Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about
this driver when configuring a kernel without Intel Keem Bay platform
support.

Fixes: c544912bcc2dc806 ("ASoC: Intel: Add makefiles and kconfig changes for KeemBay")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201110145001.3280479-1-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers

[ Upstream commit b33340e33acdfe5ca6a5aa1244709575ae1e0432 ]

Removing the meson-dw-hdmi module and re-inserting it results in a hang
as the driver writes to HDMITX_TOP_SW_RESET. Similar effects can be seen
when booting with mainline u-boot and using the u-boot provided DT (which
is highly desirable).

The reason for the hang seem to be that the clocks are not always
enabled by the time we enter meson_dw_hdmi_init(). Moving this call
*after* dw_hdmi_probe() ensures that the clocks are enabled.

Fixes: 1374b8375c2e ("drm/meson: dw_hdmi: add resume/suspend hooks")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-5-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: dw-hdmi: Register a callback to disable the regulator

[ Upstream commit 0405f94a1ae0586ca237aec0e859f1b796d6325d ]

Removing the meson-dw-hdmi module results in the following splat:

i[   43.340509] WARNING: CPU: 0 PID: 572 at drivers/regulator/core.c:2125 _regulator_put.part.0+0x16c/0x174
[...]
[   43.454870] CPU: 0 PID: 572 Comm: modprobe Tainted: G        W   E     5.10.0-rc4-00049-gd274813a4de3-dirty #2147
[   43.465042] Hardware name:  , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[   43.471945] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[   43.477896] pc : _regulator_put.part.0+0x16c/0x174
[   43.482638] lr : regulator_put+0x44/0x60
[...]
[   43.568715] Call trace:
[   43.571132]  _regulator_put.part.0+0x16c/0x174
[   43.575529]  regulator_put+0x44/0x60
[   43.579067]  devm_regulator_release+0x20/0x2c
[   43.583380]  release_nodes+0x1c8/0x2b4
[   43.587087]  devres_release_all+0x44/0x6c
[   43.591056]  __device_release_driver+0x1a0/0x23c
[   43.595626]  driver_detach+0xcc/0x160
[   43.599249]  bus_remove_driver+0x68/0xe0
[   43.603130]  driver_unregister+0x3c/0x6c
[   43.607011]  platform_driver_unregister+0x20/0x2c
[   43.611678]  meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi]
[   43.618485]  __arm64_sys_delete_module+0x1bc/0x294

as the HDMI regulator is still enabled on release.

In order to address this, register a callback that will deal with
the disabling when the driver is unbound, solving the problem.

Fixes: 161a803fe32d ("drm/meson: dw_hdmi: Add support for an optional external 5V regulator")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-4-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Unbind all connectors on module removal

[ Upstream commit e78ad18ba3658fbc8c63629e034b68d8e51acbf1 ]

Removing the meson DRM module results in the following splats:

[   42.689228] WARNING: CPU: 0 PID: 572 at drivers/gpu/drm/drm_irq.c:192 drm_irq_uninstall+0x130/0x160 [drm]
[...]
[   42.812820] Hardware name:  , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[   42.819723] pstate: 80400089 (Nzcv daIf +PAN -UAO -TCO BTYPE=--)
[   42.825737] pc : drm_irq_uninstall+0x130/0x160 [drm]
[   42.830647] lr : drm_irq_uninstall+0xc4/0x160 [drm]
[...]
[   42.917614] Call trace:
[   42.920086]  drm_irq_uninstall+0x130/0x160 [drm]
[   42.924612]  meson_drv_unbind+0x68/0xa4 [meson_drm]
[   42.929436]  component_del+0xc0/0x180
[   42.933058]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[   42.938576]  platform_drv_remove+0x38/0x60
[   42.942628]  __device_release_driver+0x190/0x23c
[   42.947198]  driver_detach+0xcc/0x160
[   42.950822]  bus_remove_driver+0x68/0xe0
[   42.954702]  driver_unregister+0x3c/0x6c
[   42.958583]  platform_driver_unregister+0x20/0x2c
[   42.963243]  meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi]
[   42.970057]  __arm64_sys_delete_module+0x1bc/0x294
[   42.974801]  el0_svc_common.constprop.0+0x80/0x240
[   42.979542]  do_el0_svc+0x30/0xa0
[   42.982821]  el0_svc+0x18/0x50
[   42.985839]  el0_sync_handler+0x198/0x404
[   42.989806]  el0_sync+0x158/0x180

immediatelly followed by

[   43.002296] WARNING: CPU: 0 PID: 572 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cleanup+0x2a8/0x304 [drm]
[...]
[   43.128150] Hardware name:  , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[   43.135052] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[   43.141062] pc : drm_mode_config_cleanup+0x2a8/0x304 [drm]
[   43.146492] lr : drm_mode_config_cleanup+0xac/0x304 [drm]
[...]
[   43.233979] Call trace:
[   43.236451]  drm_mode_config_cleanup+0x2a8/0x304 [drm]
[   43.241538]  drm_mode_config_init_release+0x1c/0x2c [drm]
[   43.246886]  drm_managed_release+0xa8/0x120 [drm]
[   43.251543]  drm_dev_put+0x94/0xc0 [drm]
[   43.255380]  meson_drv_unbind+0x78/0xa4 [meson_drm]
[   43.260204]  component_del+0xc0/0x180
[   43.263829]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[   43.269344]  platform_drv_remove+0x38/0x60
[   43.273398]  __device_release_driver+0x190/0x23c
[   43.277967]  driver_detach+0xcc/0x160
[   43.281590]  bus_remove_driver+0x68/0xe0
[   43.285471]  driver_unregister+0x3c/0x6c
[   43.289352]  platform_driver_unregister+0x20/0x2c
[   43.294011]  meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi]
[   43.300826]  __arm64_sys_delete_module+0x1bc/0x294
[   43.305570]  el0_svc_common.constprop.0+0x80/0x240
[   43.310312]  do_el0_svc+0x30/0xa0
[   43.313590]  el0_svc+0x18/0x50
[   43.316608]  el0_sync_handler+0x198/0x404
[   43.320574]  el0_sync+0x158/0x180
[   43.323852] ---[ end trace d796a3072dab01da ]---
[   43.328561] [drm:drm_mode_config_cleanup [drm]] *ERROR* connector HDMI-A-1 leaked!

both triggered by the fact that the HDMI subsystem is still active,
and the DRM removal doesn't result in the connectors being torn down.

Call drm_atomic_helper_shutdown() and component_unbind_all() to safely
tear the module down.

Fixes: 2d8f92897ad8 ("drm/meson: Uninstall IRQ handler")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-3-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Free RDMA resources after tearing down DRM

[ Upstream commit fa62ee25280ff6ae1f720f363263cb5e7743a8c8 ]

Removing the meson DRM module results in the following splat:

[ 2179.451346] Hardware name:  , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[ 2179.458316] Workqueue: events drm_mode_rmfb_work_fn [drm]
[ 2179.463597] pstate: 80c00009 (Nzcv daif +PAN +UAO -TCO BTYPE=--)
[ 2179.469558] pc : meson_rdma_writel_sync+0x44/0xb0 [meson_drm]
[ 2179.475243] lr : meson_g12a_afbcd_reset+0x34/0x60 [meson_drm]
[ 2179.480930] sp : ffffffc01212bb70
[ 2179.484207] x29: ffffffc01212bb70 x28: ffffff8044f66f00
[ 2179.489469] x27: ffffff8045b13800 x26: 0000000000000001
[ 2179.494730] x25: 0000000000000000 x24: 0000000000000001
[ 2179.499991] x23: 0000000000000000 x22: 0000000000000000
[ 2179.505252] x21: 0000000000280000 x20: 0000000000001a01
[ 2179.510513] x19: ffffff8046029480 x18: 0000000000000000
[ 2179.515775] x17: 0000000000000000 x16: 0000000000000000
[ 2179.521036] x15: 0000000000000000 x14: 0000000000000000
[ 2179.526297] x13: 0040000000000326 x12: 0309030303260300
[ 2179.531558] x11: 03000000054004a0 x10: 0418054004000400
[ 2179.536820] x9 : ffffffc008fe4914 x8 : ffffff8040a1adc0
[ 2179.542081] x7 : 0000000000000000 x6 : ffffff8042aa0080
[ 2179.547342] x5 : ffffff8044f66f00 x4 : ffffffc008fe5bc8
[ 2179.552603] x3 : 0000000000010101 x2 : 0000000000000001
[ 2179.557865] x1 : 0000000000000000 x0 : 0000000000000000
[ 2179.563127] Call trace:
[ 2179.565548]  meson_rdma_writel_sync+0x44/0xb0 [meson_drm]
[ 2179.570894]  meson_g12a_afbcd_reset+0x34/0x60 [meson_drm]
[ 2179.576241]  meson_plane_atomic_disable+0x38/0xb0 [meson_drm]
[ 2179.581966]  drm_atomic_helper_commit_planes+0x1e0/0x21c [drm_kms_helper]
[ 2179.588684]  drm_atomic_helper_commit_tail_rpm+0x68/0xb0 [drm_kms_helper]
[ 2179.595410]  commit_tail+0xac/0x190 [drm_kms_helper]
[ 2179.600326]  drm_atomic_helper_commit+0x16c/0x390 [drm_kms_helper]
[ 2179.606484]  drm_atomic_commit+0x58/0x70 [drm]
[ 2179.610880]  drm_framebuffer_remove+0x398/0x434 [drm]
[ 2179.615881]  drm_mode_rmfb_work_fn+0x68/0x8c [drm]
[ 2179.620575]  process_one_work+0x1cc/0x49c
[ 2179.624538]  worker_thread+0x200/0x444
[ 2179.628246]  kthread+0x14c/0x160
[ 2179.631439]  ret_from_fork+0x10/0x38

caused by the fact that the RDMA buffer has already been freed,
resulting in meson_rdma_writel_sync() getting a NULL pointer.

Move the afbcd reset and meson_rdma_free calls after the DRM
unregistration is complete so that the teardown can safely complete.

Fixes: d1b5e41e13a7 ("drm/meson: Add AFBCD module driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-2-maz@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/omap: dmm_tiler: fix return error code in omap_dmm_probe()

[ Upstream commit 723ae803218da993143387bf966042eccefac077 ]

Return -ENOMEM when allocating refill memory failed.

Fixes: 71e8831f6407 ("drm/omap: DMM/TILER support for OMAP4+ platform")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117061045.3452287-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci: tegra: fix wrong unit with busy_timeout

[ Upstream commit fcc541fea394d67ad607ee41acfa891e79fe17a2 ]

'busy_timeout' is in msecs, not in jiffies. Use the correct factor.

Fixes: 5e958e4aacf4 ("sdhci: tegra: Implement Tegra specific set_timeout callback")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20201116132206.23518-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: atmel_lcdfb: fix return error code in atmel_lcdfb_of_init()

[ Upstream commit ba236455ee750270f33998df57f982433cea4d8e ]

If devm_kzalloc() failed after the first time, atmel_lcdfb_of_init()
can't return -ENOMEM, fix this by putting the error code in loop.

Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117061350.3453742-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: solo6x10: fix missing snd_card_free in error handling case

[ Upstream commit dcdff74fa6bc00c32079d0bebd620764c26f2d89 ]

Fix to goto snd_error in error handling case when fails
to do snd_ctl_add, as done elsewhere in this function.

Fixes: 28cae868cd24 ("[media] solo6x10: move out of staging into drivers/media/pci.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: put dummy vote on video-mem path after last session release

[ Upstream commit eff5ce02e170125936c43ca96c7dc701a86681ed ]

As per current implementation, video driver is unvoting "videom-mem" path
for last video session during vdec_session_release().
While video playback when we try to suspend device, we see video clock
warnings since votes are already removed during vdec_session_release().

corrected this by putting dummy vote on "video-mem" after last video
session release and unvoting it during suspend.

suspend")

Fixes: 07f8f22a33a9e ("media: venus: core: remove CNOC voting while device
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: core: Fix VPD LUN ID designator priorities

[ Upstream commit 2e4209b3806cda9b89c30fd5e7bfecb7044ec78b ]

The current implementation of scsi_vpd_lun_id() uses the designator length
as an implicit measure of priority. This works most of the time, but not
always. For example, some Hitachi storage arrays return this in VPD 0x83:

VPD INQUIRY: Device Identification page
  Designation descriptor number 1, descriptor length: 24
    designator_type: T10 vendor identification,  code_set: ASCII
    associated with the Addressed logical unit
      vendor id: HITACHI
      vendor specific: 5030C3502025
  Designation descriptor number 2, descriptor length: 6
    designator_type: vendor specific [0x0],  code_set: Binary
    associated with the Target port
      vendor specific: 08 03
  Designation descriptor number 3, descriptor length: 20
    designator_type: NAA,  code_set: Binary
    associated with the Addressed logical unit
      NAA 6, IEEE Company_id: 0x60e8
      Vendor Specific Identifier: 0x7c35000
      Vendor Specific Identifier Extension: 0x30c35000002025
      [0x60060e8007c350000030c35000002025]

The current code would use the first descriptor because it's longer than
the NAA descriptor. But this is wrong, the kernel is supposed to prefer NAA
descriptors over T10 vendor ID. Designator length should only be used to
compare designators of the same type.

This patch addresses the issue by separating designator priority and
length.

Link: https://lore.kernel.org/r/20201029170846.14786-1-mwilck@suse.com
Fixes: 9983bed3907c ("scsi: Add scsi_vpd_lun_id()")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: dw: fix build error by selecting MULTIPLEXER

[ Upstream commit 1241f0787578136ab58f49adc52f2dcd2bbc4bf2 ]

Fix build error for spi-dw-bt1.o by selecting MULTIPLEXER.

hppa-linux-ld: drivers/spi/spi-dw-bt1.o: in function `dw_spi_bt1_sys_init':
(.text+0x1ac): undefined reference to `devm_mux_control_get'

Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20201116040721.8001-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: fix COMPILE_TEST error

[ Upstream commit 299fe9937dbd1a4d9a1da6a2b6f222298534ca57 ]

When compiled with CONFIG_HAVE_CLK, the kernel need to get provider for the
clock API. This is usually selected by the platform and the sound drivers
should not really care about this. However COMPILE_TEST is special and the
platform required may not have been selected, leading to this type of
error:

> aiu-encoder-spdif.c:(.text+0x3a0): undefined reference to `clk_set_parent'

Since we need a sane provider of the API with COMPILE_TEST, depends on
COMMON_CLK.

Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201116172423.546855-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Add missing error handling of listen_id

[ Upstream commit c80a0c52d85c49a910d0dc0e342e8d8898677dc0 ]

Don't silently continue if rdma_listen() fails but destroy previously
created CM_ID and return an error to the caller.

Fixes: d02d1f5359e7 ("RDMA/cma: Fix deadlock destroying listen requests")
Link: https://lore.kernel.org/r/20201104144008.3808124-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: core: vote with average bandwidth and peak bandwidth as zero

[ Upstream commit e44fb034b03231cd117d6db73fb8048deab6ea41 ]

As per bandwidth table video driver is voting with average bandwidth
for "video-mem" and "cpu-cfg" paths as peak bandwidth is zero
in bandwidth table.

suspend")

Fixes: 07f8f22a33a9e ("media: venus: core: remove CNOC voting while device
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: core: vote for video-mem path

[ Upstream commit 9e8efdb5787986cc0d0134925cf5c4f001bb3f2e ]

Currently video driver is voting for venus0-ebi path during buffer
processing with an average bandwidth of all the instances and
unvoting during session release.

While video streaming when we try to do XO-SD using the command
"echo mem > /sys/power/state command" , device is not entering
to suspend state and from interconnect summary seeing votes for venus0-ebi

Corrected this by voting for venus0-ebi path in venus_runtime_resume()
and unvote during venus_runtime_suspend().

suspend")

Fixes: 07f8f22a33a9e ("media: venus: core: remove CNOC voting while device
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: core: change clk enable and disable order in resume and suspend

[ Upstream commit 21926d466e3a4f35c2536244d1d56512cc81a0a9 ]

Currently video driver is voting after clk enable and un voting
before clk disable. This is incorrect, video driver should vote
before clk enable and unvote after clk disable.

Corrected this by changing the order of clk enable and clk disable.

suspend")

Fixes: 07f8f22a33a9e ("media: venus: core: remove CNOC voting while device
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: add missing put_device() call in mtk_jpeg_probe() and mtk_jpeg_remove()

[ Upstream commit 0d72f489995bb8565f6fe30539d4504c88356a9e ]

if mtk_jpeg_clk_init() succeed, mtk_jpeg_probe() and mtk_jpeg_remove()
doesn't have a corresponding put_device(). Thus add a new helper
mtk_jpeg_clk_release() to fix it.

Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cedrus: fix reference leak in cedrus_start_streaming

[ Upstream commit 940727bf22f74cbdef8de327de34c4ae565c89ea ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in cedrus_start_streaming. We should fix it.

Fixes: d5aecd289babf ("media: cedrus: Implement runtime PM")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: staging: rkisp1: cap: fix runtime PM imbalance on error

[ Upstream commit 4cbbe2aaa0536b0e7b3dfbd7febc3bc2ec300559 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference imbalance in rkisp1_vb2_start_streaming, so we
should fix it.

Fixes: 56e3b29f9f6b2 ("media: staging: rkisp1: add streaming paths")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: fix support of BT656 bus mode

[ Upstream commit 68579b32e786f9680e7c6b6c7d17e26943bb02b3 ]

Fix PCLK polarity not being taken into account.
Add comments about BT656 register control.
Remove useless ov5640_set_stream_bt656() function.
Refine comments about MIPI IO register control.

Fixes: 4039b03720f7 ("media: i2c: ov5640: Add support for BT656 mode")
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-fwnode: v4l2_fwnode_endpoint_parse caller must init vep argument

[ Upstream commit b3cc73d2bf14e7c6e0376fa9433e708349e9ddfc ]

Document that the caller of v4l2_fwnode_endpoint_parse() must init the
fields of struct v4l2_fwnode_endpoint (vep argument) fields.

It used to be that the fields were zeroed by v4l2_fwnode_endpoint_parse
when bus type was set to V4L2_MBUS_UNKNOWN but with recent changes (Fixes:
line below) that no longer makes sense.

Fixes: bb4bba9232fc ("media: v4l2-fwnode: Make bus configuration a struct")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: v4l2-fwnode: Return -EINVAL for invalid bus-type

[ Upstream commit 69baf338fc16a4d55c78da8874ce3f06feb38c78 ]

Return -EINVAL if invalid bus-type is detected while parsing endpoints.

Fixes: 26c1126c9b56 ("media: v4l: fwnode: Use media bus type for bus parser selection")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-vcodec: add missing put_device() call in mtk_vcodec_init_enc_pm()

[ Upstream commit 4affafd7bec7c65da31777f18bd20420f1aeb5f8 ]

if of_find_device_by_node() succeed, mtk_vcodec_init_enc_pm() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.

Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-vcodec: add missing put_device() call in mtk_vcodec_release_dec_pm()

[ Upstream commit 27c3943683f74e35e1d390ceb2e3639eff616ad6 ]

mtk_vcodec_release_dec_pm() will be called in two places:

a. mtk_vcodec_init_dec_pm() succeed while mtk_vcodec_probe() return error.
b. mtk_vcodec_dec_remove().

In both cases put_device() call is needed, since of_find_device_by_node()
was called in mtk_vcodec_init_dec_pm() previously.

Thus add put_devices() call in mtk_vcodec_release_dec_pm()

Fixes: 590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-vcodec: add missing put_device() call in mtk_vcodec_init_dec_pm()

[ Upstream commit 5d4fa2c50125c9cda9e380d89268757cc5fa743d ]

if of_find_device_by_node() succeed, mtk_vcodec_init_dec_pm() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.

Fixes: 590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: platform: add missing put_device() call in mtk_jpeg_clk_init()

[ Upstream commit f28a81a3b64270da3588174feff4628c36e0ff4e ]

if of_find_device_by_node() succeeds, mtk_jpeg_clk_init() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.

Fixes: 648372a87cee ("media: platform: Change the call functions of getting/enable/disable the jpeg's clock")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: tm6000: Fix sizeof() mismatches

[ Upstream commit a08ad6339e0441ca12533969ed94a87e3655426e ]

The are two instances of sizeof() being used incorrectly. The
sizeof(void *) is incorrect because urb_buffer is a char ** pointer,
fix this by using sizeof(*dev->urb_buffer). The sizeof(dma_addr_t *)
is incorrect, it should be sizeof(*dev->urb_dma), which is a dma_addr_t
and not a dma_addr_t *. This errors did not cause any issues because
it just so happens the sizes are the same.

Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")

Fixes: 16427faf2867 ("[media] tm6000: Add parameter to keep urb bufs allocated")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: change set_rx_mode from_ndo to can_sleep

[ Upstream commit 81dbc24147f9250c186ae5875b3ed3136e9e293b ]

Instead of having two different ways of expressing the same
sleepability concept, using opposite logic, we can rework the
from_ndo to can_sleep for a more consistent usage.

Fixes: 1800eee16676 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: flatten calls to ionic_lif_rx_mode

[ Upstream commit e94f76bb206333efcd0c02da5dbb142518c941a2 ]

The _ionic_lif_rx_mode() is only used once and really doesn't
need to be broken out.

Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: use mc sync for multicast filters

[ Upstream commit e0243e1966592859da4c6ffe6d43e1576ec3c457 ]

We should be using the multicast sync routines for the multicast
filters. Also, let's just flatten the logic a bit and pull
the small unicast routine back into ionic_set_rx_mode().

Fixes: 1800eee16676 ("net: ionic: Replace in_interrupt() usage.")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Put ACPI table after using it

[ Upstream commit c4cb773c702be5519442c8375a6476d08fe2cb46 ]

The acpi_get_table() should be coupled with acpi_put_table() if
the mapped table is not used at runtime to release the table
mapping which can prevent the memory leak.

In kfd_create_crat_image_acpi(), crat_table is copied to pcrat_image,
and in kfd_create_vcrat_image_cpu(), the acpi_table is only used to
get the OEM information, so those two table mappings need to be released
after using it.

Fixes: 174de876d6d0 ("drm/amdkfd: Group up CRAT related functions")
Fixes: 520b8fb755cc ("drm/amdkfd: Add topology support for CPUs")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts: kernel-doc: Restore anonymous enum parsing

[ Upstream commit ae5b17e464146ddb8fee744fa2150922d6072916 ]

The commit d38c8cfb0571 ("scripts: kernel-doc: add support for typedef enum")
broke anonymous enum parsing. Restore it by relying on members rather than
its name.

Fixes: d38c8cfb0571 ("scripts: kernel-doc: add support for typedef enum")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20201102170637.36138-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: gasket: interrupt: fix the missed eventfd_ctx_put() in gasket_interrupt.c

[ Upstream commit ab5b769a23af12a675b9f3d7dd529250c527f5ac ]

gasket_interrupt_set_eventfd() misses to call eventfd_ctx_put() in an
error path. We check interrupt is valid before calling
eventfd_ctx_fdget() to fix it.

There is the same issue in gasket_interrupt_clear_eventfd(), Add the
missed function call to fix it.

Fixes: 9a69f5087ccc ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20201112064924.99680-1-jingxiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: greybus: codecs: Fix reference counter leak in error handling

[ Upstream commit 3952659a6108f77a0d062d8e8487bdbdaf52a66c ]

gb_pm_runtime_get_sync has increased the usage counter of the device here.
Forgetting to call gb_pm_runtime_put_noidle will result in usage counter
leak in the error branch of (gbcodec_hw_params and gbcodec_prepare). We
fixed it by adding it.

Fixes: c388ae7696992 ("greybus: audio: Update pm runtime support in dai_ops callback")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201109131347.1725288-2-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/udl: Fix missing error code in udl_handle_damage()

[ Upstream commit a7319c8f50c5e93a12997e2d0821a2f7946fb734 ]

If udl_get_urb() fails then this should return a negative error code
but currently it returns success.

Fixes: 798ce3fe1c3a ("drm/udl: Begin/end access to imported buffers in damage-handler")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113101502.GD168908@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: arm_scmi: Fix missing destroy_workqueue()

[ Upstream commit 6bbdb46c4b1bd57839c9c0a110bd81b0be0a4046 ]

destroy_workqueue is required before the return from scmi_notification_init
in case devm_kcalloc fails to allocate registered_protocols. Fix this by
simply moving registered_protocols allocation before alloc_workqueue.

Link: https://lore.kernel.org/r/20201110074221.41235-1-miaoqinglang@huawei.com
Fixes: bd31b249692e ("firmware: arm_scmi: Add notification dispatch and delivery")
Suggested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix status check in qat_hal_put_rel_rd_xfer()

[ Upstream commit 3b5c130fb2e4c045369791c33c83b59f6e84f7d6 ]

The return value of qat_hal_rd_ae_csr() is always a CSR value and never
a status and should not be stored in the status variable of
qat_hal_put_rel_rd_xfer().

This removes the assignment as qat_hal_rd_ae_csr() is not expected to
fail.
A more comprehensive handling of the theoretical corner case which could
result in a fail will be submitted in a separate patch.

Fixes: 8c9478a400b7 ("crypto: qat - reduce stack size with KASAN")
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: Kconfig - CRYPTO_MANAGER_EXTRA_TESTS requires the manager

[ Upstream commit 6569e3097f1c4a490bdf2b23d326855e04942dfd ]

The extra tests in the manager actually require the manager to be
selected too. Otherwise the linker gives errors like:

ld: arch/x86/crypto/chacha_glue.o: in function `chacha_simd_stream_xor':
chacha_glue.c:(.text+0x422): undefined reference to `crypto_simd_disabled_for_test'

Fixes: 2343d1529aff ("crypto: Kconfig - allow tests to be disabled when manager is disabled")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted

[ Upstream commit c1995e5afaf6abf3922b5395ad1f4096951e3276 ]

If a rstctrl reset bit is already deasserted, we can just bail out early
not wait for rstst to clear. Otherwise we can have deassert fail for
already deasserted resets.

Fixes: c5117a78dd88 ("soc: ti: omap-prm: poll for reset complete during de-assert")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix compute queue priority if num_kcq is less than 4

[ Upstream commit 3f66bf401e9fde1c35bb8b02dd7975659c40411d ]

Compute queues are configurable with module param, num_kcq.
amdgpu_gfx_is_high_priority_compute_queue was setting 1st 4 queues to
high priority queue leaving a null drm scheduler in
adev->gpu_sched[hw_ip]["normal_prio"].sched if num_kcq < 5.

This patch tries to fix it by alternating compute queue priority between
normal and high priority.

Fixes: 33abcb1f5a1719b1c (drm/amdgpu: set compute queue priority at mqd_init)
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: BCM47XX: fix kconfig dependency bug for BCM47XX_BCMA

[ Upstream commit 3a5fe2fb9635c43359c9729352f45044f3c8df6b ]

When BCM47XX_BCMA is enabled and BCMA_DRIVER_PCI is disabled, it results
in the following Kbuild warning:

WARNING: unmet direct dependencies detected for BCMA_DRIVER_PCI_HOSTMODE
  Depends on [n]: MIPS [=y] && BCMA_DRIVER_PCI [=n] && PCI_DRIVERS_LEGACY [=y] && BCMA [=y]=y
  Selected by [y]:
  - BCM47XX_BCMA [=y] && BCM47XX [=y] && PCI [=y]

The reason is that BCM47XX_BCMA selects BCMA_DRIVER_PCI_HOSTMODE without
depending on or selecting BCMA_DRIVER_PCI while BCMA_DRIVER_PCI_HOSTMODE
depends on BCMA_DRIVER_PCI. This can also fail building the kernel.

Honor the kconfig dependency to remove unmet direct dependency warnings
and avoid any potential build failures.

Fixes: c1d1c5d4213e ("bcm47xx: add support for bcma bus")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209879
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ti: k3-am65*/j721e*: Fix unit address format error for dss node

[ Upstream commit cfbf17e69ae82f647c287366b7573e532fc281ee ]

Fix the node address to follow the device tree convention.

This fixes the dtc warning:
<stdout>: Warning (simple_bus_reg): /bus@100000/dss@04a00000: simple-bus
unit address format error, expected "4a00000"

Fixes: 76921f15acc0 ("arm64: dts: ti: k3-j721e-main: Add DSS node")
Fixes: fc539b90eda2 ("arm64: dts: ti: am654: Add DSS node")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://lore.kernel.org/r/20201104222519.12308-1-nm@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: fix Kconfig dependency for SND_INTEL_DSP_CONFIG

[ Upstream commit 358f0ac1f2791c80c19cc26706cf34664c9fd756 ]

SND_INTEL_DSP_CONFIG is selected by the HDaudio, Skylake and SOF
drivers. When the HDaudio link is not selected as a option, this
Kconfig option is not touched and will default to whatever other
drivers selected. In the case e.g. where HDaudio is compiled as
built-in, the linker will complain:

ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe':
sof-pci-dev.c:(.text+0x5c): undefined reference to
`snd_intel_dsp_driver_probe'

Adding the select for all HDaudio platforms, regardless of whether
they rely on the HDaudio link or not, solves the problem.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 82d9d54a6c0ee ('ALSA: hda: add Intel DSP configuration / probe code')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201112164425.25603-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMa/mthca: Work around -Wenum-conversion warning

[ Upstream commit fbb7dc5db6dee553b5a07c27e86364a5223e244c ]

gcc points out a suspicious mixing of enum types in a function that
converts from MTHCA_OPCODE_* values to IB_WC_* values:

drivers/infiniband/hw/mthca/mthca_cq.c: In function 'mthca_poll_one':
drivers/infiniband/hw/mthca/mthca_cq.c:607:21: warning: implicit conversion from 'enum <anonymous>' to 'enum ib_wc_opcode' [-Wenum-conversion]
607 | entry->opcode = MTHCA_OPCODE_INVALID;

Nothing seems to ever check for MTHCA_OPCODE_INVALID again, no idea if
this is meaningful, but it seems harmless as it deals with an invalid
input.

Remove MTHCA_OPCODE_INVALID and set the ib_wc_opcode to 0xFF, which is
still bogus, but at least doesn't make compiler warnings.

Fixes: 2a4443a69934 ("[PATCH] IB/mthca: fill in opcode field for send completions")
Link: https://lore.kernel.org/r/20201026211311.3887003-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: arizona: Fix a wrong free in wm8997_probe

[ Upstream commit 5e7aace13df24ff72511f29c14ebbfe638ef733c ]

In the normal path, we should not free the arizona,
we should return immediately. It will be free when
call remove operation.

Fixes: 31833ead95c2c ("ASoC: arizona: Move request of speaker IRQs into bus probe")
Reported-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111130923.220186-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtiofs fix leak in setup

[ Upstream commit 66ab33bf6d4341574f88b511e856a73f6f2a921e ]

This can be triggered for example by adding the "-omand" mount option,
which will be rejected and virtio_fs_fill_super() will return an error.

In such a case the allocations for fuse_conn and fuse_mount will leak due
to s_root not yet being set and so ->put_super() not being called.

Fixes: a62a8ef9d97d ("virtio-fs: add virtiofs filesystem")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: sprd: fix reference leak in sprd_spi_remove

[ Upstream commit e4062765bc2a41e025e29dd56bad798505036427 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in sprd_spi_remove, so we should fix it.

Fixes: e7d973a31c24b ("spi: sprd: Add SPI driver for Spreadtrum SC9860")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20201106015035.139574-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8998: Fix PM disable depth imbalance on error

[ Upstream commit 193aa0a043645220d2a2f783ba06ae13d4601078 ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes: 31833ead95c2c ("ASoC: arizona: Move request of speaker IRQs into bus probe")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111041326.1257558-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8994: Fix PM disable depth imbalance on error

[ Upstream commit b8161cbe55a1892a19a318eaebbda92438fa708c ]

The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.

Fixes: 57e265c8d71fb ("ASoC: wm8994: Move runtime PM init to platform device init")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111041326.1257558-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftest/bpf: Add missed ip6ip6 test back

[ Upstream commit 58cfa49c2ba7f815adccc27a775e7cf8a8f7f539 ]

In comment 173ca26e9b51 ("samples/bpf: add comprehensive ipip, ipip6,
ip6ip6 test") we added ip6ip6 test for bpf tunnel testing. But in commit
933a741e3b82 ("selftests/bpf: bpf tunnel test.") when we moved it to
the current folder, we didn't add it.

This patch add the ip6ip6 test back to bpf tunnel test. Update the ipip6's
topology for both IPv4 and IPv6 testing. Since iperf test is removed as
currect framework simplified it in purpose, I also removed unused tcp
checkings in test_tunnel_kern.c.

Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110015013.1570716-2-liuhangbin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/run_kselftest.sh: fix dry-run typo

[ Upstream commit 93f20eff0cca972d74cb554a2e8b47730228be16 ]

Should be -d instead of -n for dry-run.

Fixes: 5da1918446a1 ("selftests/run_kselftest.sh: Make each test individually selectable")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: do not notify audio subsystem if sink doesn't support audio

[ Upstream commit e8c765811b1064c200829eacf237ac8c25e79cd0 ]

For sinks that do not support audio, there is no need to notify
audio subsystem of the connection event.

This will make sure that audio routes only to the primary display
when connected to such sinks.

changes in v2:
- Added fixes tag
- Removed nested if condition and removed usage of global pointer

Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM")
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: skip checking LINK_STATUS_UPDATED bit

[ Upstream commit ea530388e64bd584645f2d89e40ca7dffade8eff ]

Some dongle will not clear LINK_STATUS_UPDATED bit after
DPCD read which cause link training failed. This patch
just read 6 bytes of DPCD link status from sink and return
without checking LINK_STATUS_UPDATED bit.
Only 8 bits are used to represent link rate at sinker DPCD.
The really link rate is 2.7Mb times the 8 bits value.
For example, 0x0A at DPCD is equal to 2.7Gb (10 * 2.7Mb).
This patch also convert 8 bits value of DPCD to really link
rate to fix worng link rate error during phy compliance test.

Fixes: 6625e2637d93 ("drm/msm/dp: DisplayPort PHY compliance tests fixup")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dp: return correct connection status after suspend

[ Upstream commit 19e52bcb27c2ba140699d2230d722366d7d048a1 ]

During suspend, dp host controller and hpd block are disabled due to
both ahb and aux clock are disabled. Therefore hpd plug/unplug interrupts
will not be generated. At dp_pm_resume(), reinitialize both dp host
controller and hpd block so that hpd plug/unplug interrupts will be
generated and handled by driver so that hpd connection state is updated
correctly. This patch will fix link training flaky issues.

Changes in v2:
-- use container_of to cast correct dp_display_private pointer
   at both dp_pm_suspend() and dp_pm_resume().

Changes in v3:
-- replace hpd_state atomic_t  with u32

Changes in v4
-- call dp_display_host_deinit() at dp_pm_suspend()
-- call dp_display_host_init() at msm_dp_display_enable()
-- fix phy->init_count unbalance which causes link training failed

Changes in v5
--  add Fixes tag

Fixes:  8ede2ecc3e5e (drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets)
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: tegra: fix strncpy()/strncat() confusion

[ Upstream commit 9294996f0be40e9da818ed891c82397ab63c00d0 ]

The way that bpmp_populate_debugfs_inband() uses strncpy()
and strncat() makes no sense since the size argument for
the first is insufficient to contain the trailing '/'
and the second passes the length of the input rather than
the output, which triggers a warning:

In function 'strncat',
    inlined from 'bpmp_populate_debugfs_inband' at ../drivers/firmware/tegra/bpmp-debugfs.c:422:4:
include/linux/string.h:289:30: warning: '__builtin_strncat' specified bound depends on the length of the source argument [-Wstringop-overflow=]
  289 | #define __underlying_strncat __builtin_strncat
      |                              ^
include/linux/string.h:367:10: note: in expansion of macro '__underlying_strncat'
  367 |   return __underlying_strncat(p, q, count);
      |          ^~~~~~~~~~~~~~~~~~~~
drivers/firmware/tegra/bpmp-debugfs.c: In function 'bpmp_populate_debugfs_inband':
include/linux/string.h:288:29: note: length computed here
  288 | #define __underlying_strlen __builtin_strlen
      |                             ^
include/linux/string.h:321:10: note: in expansion of macro '__underlying_strlen'
  321 |   return __underlying_strlen(p);

Simplify this to use an snprintf() instead.

Fixes: 5e37b9c137ee ("firmware: tegra: Add support for in-band debug")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a5xx: Clear shadow on suspend

[ Upstream commit 5771de5d5b3bfaf279e5c262a113d4b6fbe54355 ]

Similar to the previous patch, clear shadow on suspend to avoid timeouts
waiting for ringbuffer space.

Fixes: 8907afb476ac ("drm/msm: Allow a5xx to mark the RPTR shadow as privileged")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a6xx: Clear shadow on suspend

[ Upstream commit e8b0b994c3a5881f0648d53f90435120089c56ad ]

Clear the shadow rptr on suspend.  Otherwise, when we resume, we can
have a stale value until CP_WHERE_AM_I executes.  If we suspend near
the ringbuffer wraparound point, this can lead to a chicken/egg
situation where we are waiting for ringbuffer space to write the
CP_WHERE_AM_I (or CP_INIT) packet, because we mistakenly believe that
the ringbuffer is full (due to stale rptr value in the shadow).

Fixes errors like:

  [drm:adreno_wait_ring [msm]] *ERROR* timeout waiting for space in ringbuffer 0

in the resume path.

Fixes: d3a569fccfa0 ("drm/msm: a6xx: Use WHERE_AM_I for eligible targets")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: fix mwifiex_shutdown_sw() causing sw reset failure

[ Upstream commit fa74cb1dc0f4da46c441b735ca865ac52de42c0e ]

When a PCIe function level reset (FLR) is performed but without fw reset for
some reasons (e.g., on Microsoft Surface devices, fw reset requires other
quirks), it fails to reset wifi properly. You can trigger the issue on such
devices via debugfs entry for reset:

    $ echo 1 | sudo tee /sys/kernel/debug/mwifiex/mlan0/reset

and the resulting dmesg log:

    [   45.740508] mwifiex_pcie 0000:03:00.0: Resetting per request
    [   45.742937] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 3
    [   45.744666] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex...
    [   45.751530] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [   45.751539] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [   45.771691] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [   45.771695] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [   45.771697] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [   45.771698] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [   45.771699] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [   45.771701] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [   45.771702] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [   45.771703] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [   45.771704] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [   45.771705] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [   45.771707] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
    [   45.771708] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [   53.099343] mwifiex_pcie 0000:03:00.0: info: trying to associate to '[SSID]' bssid [BSSID]
    [   53.241870] mwifiex_pcie 0000:03:00.0: info: associated to bssid [BSSID] successfully
    [   75.377942] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
    [   85.385491] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 15
    [   87.539408] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
    [   87.539412] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [   99.699917] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
    [   99.699925] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [  111.859802] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
    [  111.859808] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
    [...]

When comparing mwifiex_shutdown_sw() with mwifiex_pcie_remove(), it
lacks mwifiex_init_shutdown_fw().

This commit fixes mwifiex_shutdown_sw() by adding the missing
mwifiex_init_shutdown_fw().

Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201028142110.18144-2-kitakar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Handle errors if peer creation fails

[ Upstream commit c134d1f8c436d96b3f62896c630278e3ec001280 ]

ath11k_peer_create() is called without its return value being checked,
meaning errors will be unhandled. Add missing check and, as the mutex is
unconditionally unlocked on leaving this function, simplify the exit
path.

Addresses-Coverity-ID: 1497531 ("Code maintainability issues")
Fixes: 701e48a43e15 ("ath11k: add packet log support for QCA6390")
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201004100218.311653-1-alex.dewar90@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: common: Fix refcounting in qcom_snd_parse_of()

[ Upstream commit 4e59dd249cd513a211e2ecce2cb31f4e29a5ce5b ]

There are two issues in this function.

1) We can't drop the refrences on "cpu", "codec" and "platform" before
   we take the reference.  This doesn't cause a problem on the first
   iteration because those pointers start as NULL so the of_node_put()
   is a no-op.  But on the subsequent iterations, it will lead to a use
   after free.

2) If the devm_kzalloc() allocation failed then the code returned
   directly instead of cleaning up.

Fixes: c1e6414cdc37 ("ASoC: qcom: common: Fix refcount imbalance on error")
Fixes: 1e36ea360ab9 ("ASoC: qcom: common: use modern dai_link style")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201105125154.GA176426@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: imx: fix reference leak in two imx operations

[ Upstream commit 1dcbdd944824369d4569959f8130336fe6fe5f39 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in callers(spi_imx_prepare_message and
spi_imx_remove), so we should fix it.

Fixes: 525c9e5a32bd7 ("spi: imx: enable runtime pm support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102145835.4765-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: bcm63xx-hsspi: fix missing clk_disable_unprepare() on error in bcm63xx_hsspi_resume

[ Upstream commit 9bb9ef2b3e5d9d012876e7e2d7757eb30e865bee ]

Fix the missing clk_disable_unprepare() before return
from bcm63xx_hsspi_resume in the error handling case when
fails to prepare and enable bs->pll_clk.

Fixes: 0fd85869c2a9 ("spi/bcm63xx-hsspi: keep pll clk enabled")
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201103074911.195530-1-miaoqinglang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra114: fix reference leak in tegra spi ops

[ Upstream commit a042184c7fb99961ea083d4ec192614bec671969 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in two callers(tegra_spi_setup and
tegra_spi_resume), so we should fix it.

Fixes: f333a331adfac ("spi/tegra114: add spi driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103141306.5607-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra20-sflash: fix reference leak in tegra_sflash_resume

[ Upstream commit 3482e797ab688da6703fe18d8bad52f94199f4f2 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in tegra_sflash_resume, so we should fix it.

Fixes: 8528547bcc336 ("spi: tegra: add spi driver for sflash controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103141323.5841-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra20-slink: fix reference leak in slink ops of tegra20

[ Upstream commit 763eab7074f6e71babd85d796156f05a675f9510 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in two callers(tegra_slink_setup and
tegra_slink_resume), so we should fix it.

Fixes: dc4dc36056392 ("spi: tegra: add spi driver for SLINK controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103141345.6188-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: mt7621: fix missing clk_disable_unprepare() on error in mt7621_spi_probe

[ Upstream commit 702b15cb97123cedcec56a39d9a21c5288eb9ae1 ]

Fix the missing clk_disable_unprepare() before return
from mt7621_spi_probe in the error handling case.

Fixes: cbd66c626e16 ("spi: mt7621: Move SPI driver out of staging")
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20201103074912.195576-1-miaoqinglang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-ti-qspi: fix reference leak in ti_qspi_setup

[ Upstream commit 45c0cba753641e5d7c3207f04241bd0e7a021698 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in ti_qspi_setup, so we should fix it.

Fixes: 505a14954e2d7 ("spi/qspi: Add qspi flash controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201103140947.3815-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32-qspi: fix reference leak in stm32 qspi operations

[ Upstream commit 88e1419b5ee30cc50e0c4d5265bdee1ba04af539 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in two callers(stm32_qspi_exec_op and
stm32_qspi_setup), so we should fix it.

Fixes: 9d282c17b023a ("spi: stm32-qspi: Add pm_runtime support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Link: https://lore.kernel.org/r/20201106015357.141235-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_h5: fix memory leak in h5_close

[ Upstream commit 855af2d74c870d747bf53509f8b2d7b9dc9ee2c3 ]

When h5_close() is called, h5 is directly freed when !hu->serdev.
However, h5->rx_skb is not freed, which causes a memory leak.

Freeing h5->rx_skb and setting it to NULL, fixes this memory leak.

Fixes: ce945552fde4 ("Bluetooth: hci_h5: Add support for serdev enumerated devices")
Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix: LL PRivacy BLE device fails to connect

[ Upstream commit 1fb17dfc258ff6208f7873cc7b8e40e27515d2d5 ]

When adding device to white list the device is added to resolving list
also. It has to be added only when HCI_ENABLE_LL_PRIVACY flag is set.
HCI_ENABLE_LL_PRIVACY flag has to be tested before adding/deleting devices
to resolving list. use_ll_privacy macro is used only to check if controller
supports LL_Privacy.

https://bugzilla.kernel.org/show_bug.cgi?id=209745

Fixes: 0eee35bdfa3b ("Bluetooth: Update resolving list when updating whitelist")
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix null pointer dereference in hci_event_packet()

[ Upstream commit 6dfccd13db2ff2b709ef60a50163925d477549aa ]

AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called
from hci_event_packet() and there is a possibility, that hcon->amp_mgr may
not be found when accessing after initialization of hcon.

- net/bluetooth/hci_event.c:4945
The bug seems to get triggered in this line:

bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;

Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status.

Fixes: d5e911928bd8 ("Bluetooth: AMP: Process Physical Link Complete evt")
Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f
Signed-off-by: Anmol Karn <anmol.karan123@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Add flags to boe_nv133fhm_n61

[ Upstream commit ab6fd5d44aa21ede9e566f89132f7bdda7f33093 ]

Reading the EDID of this panel shows that these flags should be set. Set
them so that we match what is in the EDID.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106182333.3080124-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: Correct psci compatible used on Exynos7

[ Upstream commit e1e47fbca668507a81bb388fcae044b89d112ecc ]

It's not possible to reboot or poweroff Exynos7420 using PSCI. Instead
we need to use syscon reboot/poweroff drivers, like it's done for other
Exynos SoCs. This was confirmed by checking vendor source and testing it
on Samsung Galaxy S6 device based on this SoC.

To be able to use custom restart/poweroff handlers instead of PSCI
functions, we need to correct psci compatible. This also requires us to
provide function ids for CPU_ON and CPU_OFF.

Fixes: fb026cb65247 ("arm64: dts: Add reboot node for exynos7")
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20201107133926.37187-2-pawel.mikolaj.chmiel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: Include common syscon restart/poweroff for Exynos7

[ Upstream commit 73bc7510ea0dafb4ff1ae6808759627a8ec51f5a ]

Exynos7 uses the same syscon reboot and poweroff nodes as other Exynos
SoCs, so instead of duplicating code we can just include common dtsi
file, which already contains definitions of them. After this change,
poweroff node will be also available, previously this dts file did
contain only reboot node.

Fixes: fb026cb65247 ("arm64: dts: Add reboot node for exynos7")
Fixes: b9024cbc937d ("arm64: dts: Add initial device tree support for exynos7")
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://lore.kernel.org/r/20201107133926.37187-1-pawel.mikolaj.chmiel@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: Fix memory leak for unpaired brcmf_{alloc/free}

[ Upstream commit 9db946284e07bb27309dd546b7fee528664ba82a ]

There are missig brcmf_free() for brcmf_alloc(). Fix memory leak
by adding missed brcmf_free().

Reported-by: Jaehoon Chung <jh80.chung@samsung.com>
Fixes: a1f5aac1765a ("brcmfmac: don't realloc wiphy during PCIe reset")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1603849967-22817-1-git-send-email-sw0312.kim@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: fix wmi init configuration

[ Upstream commit 36c7c640ffeb87168e5ff79b7a36ae3a020bd378 ]

Assign the correct hw_op ath11k_init_wmi_config_ipq8074 to
the hw IPQ8074. Also update the correct TWT radio count.
Incorrect TWT radio count cause TWT feature fails on radio2
because physical device count is hardcoded to 2. so set
the value dynamically.

Found this during code review.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2

Fixes: 2d4bcbed5b7d53e1 ("ath11k: initialize wmi config based on hw_params")
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1604512020-25197-1-git-send-email-periyasa@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Fix number of rules in filtered ETSI regdomain

[ Upstream commit 6189be7d145c3a2d48514eb8755483602ff5a4b4 ]

The ath11k code will try to insert wheather rader related limits when the
DFS region is set to ETSI. For this reason, it will add two more entries in
the array of reg_rules. But the 2.4.0.1 firmware is prefiltering the list
of reg rules it returns for 2.4GHz PHYs. They will then not contain the
list of 5GHz rules and thus no wheather radar band rules were inserted by
this code.

But the code didn't fix the n_reg_rules for this regulatory domain and PHY
when this happened. This resulted in a rejection by is_valid_rd because it
found rules which start and end at 0khz. This resulted in a splat like:

  Invalid regulatory domain detected
  ------------[ cut here ]------------
  WARNING: at backports-20200628-4.4.60-9a94b73e75/net/wireless/reg.c:3721
  [...]
  ath11k c000000.wifi1: failed to perform regd update : -22

The number of rules must therefore be saved after they were converted from
the ath11k format to the ieee80211_regdomain format and not before.

Tested with IPQ8074 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201030101940.2387952-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath11k: Initialize complete alpha2 for regulatory change

[ Upstream commit 383a32cde4172db19d4743d4c782c00af39ff275 ]

The function ath11k_wmi_send_init_country_cmd is taking 3 byte from alpha2
of the structure wmi_init_country_params. But the function
ath11k_reg_notifier is only initializing 2 bytes. The third byte is
therefore always an uninitialized value.

The command can happen to look like

0c 00 87 02 01 00 00 00 00 00 00 00 43 41 f8 00

instead of

0c 00 87 02 01 00 00 00 00 00 00 00 43 41 00 00

Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01161-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00019-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2

Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201021140555.4114715-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/edid: Fix uninitialized variable in drm_cvt_modes()

[ Upstream commit 991fcb77f490390bcad89fa67d95763c58cdc04c ]

Noticed this when trying to compile with -Wall on a kernel fork. We
potentially don't set width here, which causes the compiler to complain
about width potentially being uninitialized in drm_cvt_modes(). So, let's
fix that.

Changes since v1:
* Don't emit an error as this code isn't reachable, just mark it as such
Changes since v2:
* Remove now unused variable

Fixes: 3f649ab728cd ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105235703.1328115-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mce: Correct the detection of invalid notifier priorities

[ Upstream commit 15af36596ae305aefc8c502c2d3e8c58221709eb ]

Commit

c9c6d216ed28 ("x86/mce: Rename "first" function as "early"")

changed the enumeration of MCE notifier priorities. Correct the check
for notifier priorities to cover the new range.

[ bp: Rewrite commit message, remove superfluous brackets in
conditional. ]

Fixes: c9c6d216ed28 ("x86/mce: Rename "first" function as "early"")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201106141216.2062-2-thunder.leizhen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix tests for local_storage

[ Upstream commit f0e5ba0bc481df77cf0afac2b33e420b33eeb463 ]

The {inode,sk}_storage_result checking if the correct value was retrieved
was being clobbered unconditionally by the return value of the
bpf_{inode,sk}_storage_delete call.

Also, consistently use the newly added BPF_LOCAL_STORAGE_GET_F_CREATE
flag.

Fixes: cd324d7abb3d ("bpf: Add selftests for local_storage")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201106103747.2780972-7-kpsingh@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: fix reference leak in stm32_spi_resume

[ Upstream commit 900ccdcb79bb61471df1566a70b2b39687a628d5 ]

pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to pm_runtime_put_noidle will result in
reference leak in stm32_spi_resume, so we should fix it.

Fixes: db96bf976a4fc ("spi: stm32: fixes suspend/resume management")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Alain Volmat <alain.volmat@st.com>
Link: https://lore.kernel.org/r/20201106015217.140476-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211/cfg80211: fix potential infinite loop

[ Upstream commit ba5c25236bc3d399df82ebe923490ea8d2d35cf2 ]

The for-loop iterates with a u8 loop counter and compares this
with the loop upper limit of request->n_ssids which is an int type.
There is a potential infinite loop if n_ssids is larger than the
u8 loop counter, so fix this by making the loop counter an int.

Addresses-Coverity: ("Infinite loop")
Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201029222407.390218-1-colin.king@canonical.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling

[ Upstream commit 200ea5a2292dc444a818b096ae6a32ba3caa51b9 ]

A previous fix, commit 83370b31a915 ("selinux: fix error initialization
in inode_doinit_with_dentry()"), changed how failures were handled
before a SELinux policy was loaded. Unfortunately that patch was
potentially problematic for two reasons: it set the isec->initialized
state without holding a lock, and it didn't set the inode's SELinux
label to the "default" for the particular filesystem. The later can
be a problem if/when a later attempt to revalidate the inode fails
and SELinux reverts to the existing inode label.

This patch should restore the default inode labeling that existed
before the original fix, without affecting the LABEL_INVALID marking
such that revalidation will still be attempted in the future.

Fixes: 83370b31a915 ("selinux: fix error initialization in inode_doinit_with_dentry()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam - fix printing on xts fallback allocation error path

[ Upstream commit ab95bd2aa904e4f53b7358efeea1d57693fb7889 ]

At the time xts fallback tfm allocation fails the device struct
hasn't been enabled yet in the caam xts tfm's private context.

Fix this by using the device struct from xts algorithm's private context
or, when not available, by replacing dev_err with pr_err.

Fixes: 9d9b14dbe077 ("crypto: caam/jr - add fallback for XTS with more than 8B IV")
Fixes: 83e8aa912138 ("crypto: caam/qi - add fallback for XTS with more than 8B IV")
Fixes: 36e2d7cfdcf1 ("crypto: caam/qi2 - add fallback for XTS with more than 8B IV")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: arm/aes-neonbs - fix usage of cbc(aes) fallback

[ Upstream commit a2715fbdc6fc387e85211df917a4778761ec693d ]

Loading the module deadlocks since:
-local cbc(aes) implementation needs a fallback and
-crypto API tries to find one but the request_module() resolves back to
the same module

Fix this by changing the module alias for cbc(aes) and
using the NEED_FALLBACK flag when requesting for a fallback algorithm.

Fixes: 00b99ad2bac2 ("crypto: arm/aes-neonbs - Use generic cbc encryption path")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: arm64/poly1305-neon - reorder PAC authentication with SP update

[ Upstream commit 519a0d7e495a6d3ce62594e485aea2a3a4a2ca0a ]

PAC pointer authentication signs the return address against the value
of the stack pointer, to prevent stack overrun exploits from corrupting
the control flow. However, this requires that the AUTIASP is issued with
SP holding the same value as it held when the PAC value was generated.
The Poly1305 NEON code got this wrong, resulting in crashes on PAC
capable hardware.

Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>