Mike Frysinger [Wed, 22 Sep 2010 21:26:13 +0000 (21:26 +0000)]
gas: blackfin: fix DBG/DBGCMPLX insn encoding
Some extended registers when given to the DBG/DBGCMPLX pseudo insns are
not encoded properly. So fix them, fix the display of them when being
disassembled, and add testcases.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 22 Sep 2010 21:08:31 +0000 (21:08 +0000)]
gas: blackfin: handle multibyte symbols
Accept any 8bit char with the high bit set so as to support multibyte
characters. Also use the locale safe regular expressions to match
chars/digits. This brings the Blackfin assembler inline with the
behavior of other assemblers.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 22 Sep 2010 21:05:03 +0000 (21:05 +0000)]
opcodes/gas: blackfin: handle more ASTAT flags
Support a few more ASTAT bits with the standard insns that operate on
ASTAT bits directly.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 22 Sep 2010 20:59:00 +0000 (20:59 +0000)]
opcodes/gas: blackfin: support OUTC debug insn
The disassembler has partial (but incomplete/broken) support already for
the pseudo debug insn OUTC, so let's fix it up and finish it. And now
that the disassembler can handle it, make sure our assembler can output
it too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 22 Sep 2010 20:37:25 +0000 (20:37 +0000)]
opcodes: blackfin: fix decoding of LSHIFT insns
The Blackfin ISA does not have a "SHIFT" insn, it has either LSHIFT,
ASHIFT, or BXORSHIFT. So be specific when disassembling.
As fall out of this change, we need to update some assembler tests.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 22 Sep 2010 20:32:40 +0000 (20:32 +0000)]
opcodes: blackfin: constify formatting related structures
No need for these local structures related to formatting of output to
be writable, so constify the whole shebang.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 22 Sep 2010 20:21:32 +0000 (20:21 +0000)]
gas: blackfin: support ABORT debug insn
There is a pseudo debug insn named ABORT that is commonly used in
simulation, so support it in the assembler too. The disassembler
already supports it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 22 Sep 2010 20:19:53 +0000 (20:19 +0000)]
gas: blackfin: add support for BF51x-0.2 processors
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 22 Sep 2010 20:17:51 +0000 (20:17 +0000)]
gas: blackfin: add support for BF592 processors
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Joel Brobecker [Wed, 22 Sep 2010 20:08:04 +0000 (20:08 +0000)]
Fix order of ChangeLog entries.
(entry added at wrong location by patch).
Joel Brobecker [Wed, 22 Sep 2010 20:06:58 +0000 (20:06 +0000)]
preserve columnar alignment.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-const.S: Minor (space) reformatting.
Jan Kratochvil [Wed, 22 Sep 2010 20:00:53 +0000 (20:00 +0000)]
gdb/
Code cleanup.
* objfiles.c (allocate_objfile) <objfile->name != NULL>: Remove.
(free_objfile) <objfile->name != NULL>: Remove the conditional around
xfree.
* objfiles.h (struct objfile) <name>: New comment it is never NULL.
* python/py-auto-load.c (auto_load_new_objfile) <!objfile->name>:
Remove.
* python/py-objfile.c (objfpy_get_filename) <obj->objfile->name>
Remove the conditional.
* python/py-progspace.c (pspy_get_filename) <objfile->name>: Likewise.
Jan Kratochvil [Wed, 22 Sep 2010 19:59:15 +0000 (19:59 +0000)]
gdb/
* main.c: Include objfiles.h.
(captured_main): New variable objfile. Call
load_auto_scripts_for_objfile for ALL_OBJFILES.
Jan Kratochvil [Wed, 22 Sep 2010 19:22:44 +0000 (19:22 +0000)]
gdb/
* dwarf2read.c (die_needs_namespace) <DW_TAG_variable>: Add also
DW_TAG_constant.
gdb/testsuite/
* gdb.fortran/module.exp (fully qualified name of DW_TAG_constant):
New test.
* gdb.fortran/module.f90 (mod1) <var_const>: New constant.
Mike Frysinger [Wed, 22 Sep 2010 19:17:19 +0000 (19:17 +0000)]
gas: blackfin: allow end-of-line comments via #
We don't use the # character in the Blackfin assembly language, so let it
start end-of-line comments like most other assemblers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Joel Brobecker [Wed, 22 Sep 2010 19:13:40 +0000 (19:13 +0000)]
[testsuite] dw2-const.S: fix type reference size on 64bit platforms.
The testcase was failing on various 64bit platforms, because the
debugging info said that the target type for a const type is a
4-byte reference. In the asm file, I used a .long directive, but
the size of .long is of course dependent on the platform. This
replaces this .long by a .4byte directive.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-const.S: Use .4byte to reference the target
type of our const type.
Joel Brobecker [Wed, 22 Sep 2010 16:15:34 +0000 (16:15 +0000)]
DWARF: Add support for DW_TAG_constant DIEs
gdb/ChangeLog:
* dwarf2read.c (scan_partial_symbols): Add handling of
DW_TAG_constant DIEs.
(add_partial_symbol, load_partial_dies, new_symbol): Likewise.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-const.S, gdb.dwarf2/dw2-const.exp: New files.
Joel Brobecker [Wed, 22 Sep 2010 16:15:01 +0000 (16:15 +0000)]
Allow disabling of gdbserver build (--enable-gdbserver=yes/no/auto).
This patch adds a new --enable-gdbserver=yes/no/auto command-line switch
in gdb/configure. The primary purpose is to allow a user to disable the
build & install of gdbserver when not desired. It also allows the user
to request gdbserver in which case the configure script will abort if
automatic building of gdbserver is not supported for that configuration.
The default keeps things as is: We automatically build gdbserver if
building for a native configuration and if gdbserver is supported for
that configuration.
gdb/ChangeLog:
* configure.ac: Add support for --enable-gdbserver.
* configure: Regenerate.
At AdaCore, this is mostly intended for ia64-linux, where we currently
do not want to distribute gdbserver. This will be useful in the context
of I417-033, where we are now using "make install" to determine what
needs to be packaged inside the GNAT Pro package.
Tom Tromey [Wed, 22 Sep 2010 15:51:43 +0000 (15:51 +0000)]
* gdb.texinfo (Values From Inferior): Mention Value.__init__.
Sami Wagiaalla [Wed, 22 Sep 2010 15:48:59 +0000 (15:48 +0000)]
Fix PR 12028: "GDB crashes on a double free during overload resolution "
2010-09-22 Sami Wagiaalla <swagiaal@redhat.com>
PR C++/12028
* valops.c (find_oload_champ_namespace_loop): removed incorrect
'old_cleanups' reassignment.
2010-09-22 Sami Wagiaalla <swagiaal@redhat.com>
* gdb.cp/pr12028.cc: New.
* gdb.cp/pr12028.exp: New.
Kai Tietz [Wed, 22 Sep 2010 14:20:24 +0000 (14:20 +0000)]
2010-09-22 Kai Tietz <kai.tietz@onevision.com>
* ldlang.c (lang_add_section): Allow for debugging
section to be marked as noload but to keep content.
(IGNORE_SECTION): Likewise.
(lang_check_section_addresses): Likewise.
* ldwrite.c (build_link_order): Likewise.
Kai Tietz [Wed, 22 Sep 2010 14:19:35 +0000 (14:19 +0000)]
2010-09-22 Kai Tietz <kai.tietz@onevision.com>
* coffcode.h (sec_to_styp_flags): Adjust debug
sections to be conform to pe-coff specification
and avoid marking them as excluded.
(styp_to_sec_flags): Doing reverse mapping.
Eli Zaretskii [Wed, 22 Sep 2010 09:13:31 +0000 (09:13 +0000)]
gdb.texinfo (Values From Inferior): Clarify that
value.dynamic_type works only in C++ programs with RTTI.
Kai Tietz [Wed, 22 Sep 2010 08:03:42 +0000 (08:03 +0000)]
2010-09-22 Kai Tietz <kai.tietz@onevision.com>
* emultempl/pe.em (gld_${EMULATION_NAME}_place_orphan): Add
idata to orphan set.
* emultempl/pep.em: Likewise.
* scripttempl/armcoff.sc: Separate idata
and add __IAT_start__ and __IAT_end__ labels.
* scripttempl/pe.sc: Likewise.
* scripttempl/pep.sc: Likewise.
Kai Tietz [Wed, 22 Sep 2010 08:01:56 +0000 (08:01 +0000)]
2010-09-22 Kai Tietz <kai.tietz@onevision.com>
* peXXigen.c (_bfd_XXi_final_link_postscript):
Add handling for setting IAT directory entry.
gdbadmin [Wed, 22 Sep 2010 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 22 Sep 2010 00:00:06 +0000 (00:00 +0000)]
daily update
Mike Frysinger [Tue, 21 Sep 2010 06:04:21 +0000 (06:04 +0000)]
opcodes: blackfin: strip trailing whitespace
gdbadmin [Tue, 21 Sep 2010 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Tue, 21 Sep 2010 00:00:05 +0000 (00:00 +0000)]
daily update
David S. Miller [Mon, 20 Sep 2010 18:41:15 +0000 (18:41 +0000)]
* emulparams/elf32_sparc.sh: Set NOP to 0x01000000
Matthew Gretton-Dann [Mon, 20 Sep 2010 16:33:24 +0000 (16:33 +0000)]
* gas/config/tc-arm.c (arm_cpus): Correct canonical names for Cortex CPUs.
* gas/testsuite/gas/arm/attr-cpu-directive.d: Update test for change in canonical
CPU name.
* gas/testsuite/gas/arm/attr-mcpu.d: Likewise.
* ld/testsuite/ld-arm/attr-merge-6.attr: Update tests for change in canonical
CPU name.
* ld/testsuite/ld-arm/attr-merge-7.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-2.attr: Likewise.
* ld/testsuite/ld-arm/attr-merge-arch-2.attr: Likewise.
Matthew Gretton-Dann [Mon, 20 Sep 2010 16:26:53 +0000 (16:26 +0000)]
* ld/testsuite/ld-arm/script-type.ld: Update to generate symbols in a section.
Richard Henderson [Mon, 20 Sep 2010 16:09:03 +0000 (16:09 +0000)]
Use bfd_elf_generic_reloc for alpha-elf.
Richard Henderson [Mon, 20 Sep 2010 16:07:27 +0000 (16:07 +0000)]
* gas/elf/elf.exp: Disable symtab test for alpha.
gdbadmin [Mon, 20 Sep 2010 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 20 Sep 2010 00:00:05 +0000 (00:00 +0000)]
daily update
Richard Sandiford [Sun, 19 Sep 2010 10:52:17 +0000 (10:52 +0000)]
bfd/
* elfxx-mips.c (mips_elf_link_hash_entry): Add got_only_for_calls.
(mips_elf_link_hash_newfunc): Initialize it.
(mips_elf_record_global_got_symbol): Add a for_call parameter.
(mips_elf_count_got_symbols): Check SYMBOL_CALLS_LOCAL rather
than SYMBOL_REFERENCES_LOCAL if the GOT entry is only used for calls.
Try to remove .got entries in favour of .got.plt entries on VxWorks.
(_bfd_mips_elf_check_relocs): Do not try to avoid allocating
a global GOT entry for VxWorks calls. Update uses of
mips_elf_record_global_got_symbol.
(allocate_dynrelocs): Set got_only_for_calls to false if the GOT
entry is used for dynamic relocations.
Richard Sandiford [Sun, 19 Sep 2010 10:26:28 +0000 (10:26 +0000)]
bfd/
* elfxx-mips.c (mips_got_entry): Adjust commentary.
(mips_elf_create_local_got_entry): If given a symbol, check that it
has been assigned to the local part of the GOT.
(mips_elf_count_got_symbols): Take the bfd_link_info as argument
instead of the master GOT. Put all locally-binding symbols in
the local area.
(mips_elf_make_got_per_bfd): Use global_got_area to decide whether
a symbol lives in the local or global area.
(mips_elf_local_relocation_p): Remove check_forced argument and
retain only the !check_forced behavior.
(mips_elf_calculate_relocation): Adjust call accordingly.
Use global_got_area to decide whether an output relocation
should be local or global. Explicitly decay R_MIPS_GOT_PAGE
into R_MIPS_GOT_DISP where appropriate. Fix selection of
local vs. global semantics for R_MIPS*_26. Remove redundant
reevaluation of what is stored in was_local_p.
(mips_elf_create_dynamic_relocation): Use global_got_area to decide
whether the relocation should be against a global or local symbol.
(mips_elf_lay_out_got): Update the GOT traversal after the above
change to mips_elf_count_got_symbols.
(mips_elf_adjust_addend): Adjust call to mips_elf_local_relocation_p.
(_bfd_mips_elf_relocate_section): Likewise.
(_bfd_mips_elf_finish_dynamic_symbol): Use global_got_area to decide
whether the symbol has a global got entry.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
ld/testsuite/
* ld-mips-elf/elf-rel-got-n32.d: Swap two local GOT entries
and remove some duplication between the global and local GOT
entries. Adjust GP offsets accordingly.
* ld-mips-elf/elf-rel-got-n64-linux.d: Likewise.
* ld-mips-elf/elf-rel-xgot-n32.d: Reorder GOT entries and update
GP offsets accordingly.
* ld-mips-elf/elf-rel-xgot-n64-linux.d: Likewise.
* ld-mips-elf/mips16-pic-1.gd: Move all global GOT entries to
the local GOT.
* ld-mips-elf/mips16-pic-1.dd: Update GP offsets accordingly.
* ld-mips-elf/multi-got-no-shared.d: Adjust GP setup for
smaller GOT sizes.
Richard Sandiford [Sun, 19 Sep 2010 10:07:30 +0000 (10:07 +0000)]
bfd/
* elfxx-mips.c (allocate_dynrelocs): Don't add relocation symbols
to the global GOT on VxWorks.
Richard Sandiford [Sun, 19 Sep 2010 10:03:28 +0000 (10:03 +0000)]
bfd/
* elfxx-mips.c (_bfd_mips_elf_check_relocs): On VxWorks,
exclude __GOTT_BASE__ and __GOTT_INDEX__ from the warning
about HI/LO relocations in shared objects.
gdbadmin [Sun, 19 Sep 2010 00:00:34 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Sun, 19 Sep 2010 00:00:06 +0000 (00:00 +0000)]
daily update
Alan Modra [Sat, 18 Sep 2010 02:30:41 +0000 (02:30 +0000)]
* lib/ld-lib.exp (check_gc_sections_available): Fail more targets.
* ld-discard/discard.exp: Move xfails from here..
* ld-discard/extern.d: ..to here.
* ld-discard/start.d: ..and here.
* ld-discard/static.d: ..and here.
* ld-elf/binutils.exp: Don't run tbss1 and tbss2 tests on hppa64.
* ld-elf/empty2.d: Remove xfails.
* ld-elf/flags1.d: xfail hppa64.
* ld-elf/group1.d: Add comment.
* ld-elf/group2.d: xfail cr16 and crx.
* ld-elf/group3b.d: Correct xfail and add comment.
* ld-elf/group4.d: xfail cr16 and crx.
* ld-elf/group5.d: Likewise.
* ld-elf/group6.d: Likewise.
* ld-elf/group7.d: Likewise.
* ld-elf/group8a.d: Add more notarget and xfail entries. Comment.
* ld-elf/group8b.d: Likewise.
* ld-elf/group9a.d: Likewise.
* ld-elf/group9b.d: Likewise.
* ld-elf/linkonce2.d: Correct notarget and comment.
* ld-elf/merge2.d: Remove iq2000 from xfail.
* ld-elf/multibss1.d: xfail hppa64.
* ld-elf/nobits-1.d: Likewise.
* ld-elf/note-1.d: Likewise.
* ld-elf/note-2.d: Likewise.
* ld-elf/orphan-region.d: Add xfails.
* ld-elf/orphan-region.ld: Discard some sections.
* ld-elf/orphan.d: Add xfails.
* ld-elf/orphan.ld: Discard some sections.
* ld-elf/orphan3.d: Replace xfail frv-*-* with frv-*-elf. Remove
cr16, crx and d10v.
* ld-elf/pr349.d: Add xfails.
* ld-elf/warn2.d: Add xfails. Tweak symbol section for hppa64.
* ld-scripts/rgn-at5.t: Discard .reginfo.
H.J. Lu [Sat, 18 Sep 2010 00:43:39 +0000 (00:43 +0000)]
Fix date.
H.J. Lu [Sat, 18 Sep 2010 00:42:25 +0000 (00:42 +0000)]
Add a target argument.
2010-09-15 H.J. Lu <hongjiu.lu@intel.com>
* emul_aix.c (ar_emul_aix_append): Add a target argument
and ignore it if it is set.
(ar_emul_aix5_append): Likewise.
(ar_emul_aix_replace): Likewise.
(ar_emul_aix5_replace): Likewise.
Ian Lance Taylor [Sat, 18 Sep 2010 00:34:58 +0000 (00:34 +0000)]
* testsuite/Makefile.am (memory_test.o): New target.
(memory_test): Depend on memory_test.o, gcctestdir/ld, and
memory_test.t.
* testsuite/Makefile.in: Rebuild.
Ian Lance Taylor [Sat, 18 Sep 2010 00:31:02 +0000 (00:31 +0000)]
* testsuite/memory_test.sh: Adjust for change of 2010-09-10.
Alan Modra [Sat, 18 Sep 2010 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Sat, 18 Sep 2010 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Doug Kwan [Fri, 17 Sep 2010 23:51:42 +0000 (23:51 +0000)]
2010-09-17 Doug Kwan <dougkwan@google.com>
* arm.cc (Target_arm::Relocate::relocate): Ignore symbol type and
defintion if relocation uses GOT entries of the symbol.
* testsuite/icf_safe_test.sh: Fix test.
* testsuite/icf_safe_so_test.sh: Fix test.
Matthew Gretton-Dann [Fri, 17 Sep 2010 15:19:14 +0000 (15:19 +0000)]
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* config/tc-arm.c (do_t_ldmstm): Add logic to handle single-register
list for ldm/stm.
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* gas/arm/thumb2_ldmstm.d: Change single-register stmia to use 16-bit
str encoding instead of str.w. Likewise for ldmia.
* gas/arm/thumb2_ldmstm.s: Change stmia comment. Add tests for T1
ldmia-to-ldr.
Matthew Gretton-Dann [Fri, 17 Sep 2010 10:42:04 +0000 (10:42 +0000)]
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* config/tc-arm.c (parse_psr): Add condition for matching "APSR" on
non-M-arch cpus.
(psrs): Add entry for PSR flags, g, nzcvq, nzcvqg.
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* gas/arm/msr-reg.s: New file.
* gas/arm/msr-reg.d: Likewise.
* gas/arm/msr-imm.s: Likewise.
* gas/arm/msr-imm.d: Likewise.
* gas/arm/msr-imm-bad.d: Likewise.
* gas/arm/msr-imm-bad.l: Likewise.
* gas/arm/msr-reg-bad.d: Likewise.
* gas/arm/msr-imm-bad.d: Likewise.
* gas/arm/msr-reg-thumb.d: Likewise.
* gas/arm/arch7.s: Add tests for xpsr.
* gas/arm/arch7.d: Likewise.
Matthew Gretton-Dann [Fri, 17 Sep 2010 10:13:41 +0000 (10:13 +0000)]
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* config/tc-arm.c (insns): Change MRC entry to accept APSR_RR instead
of just RR.
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* gas/arm/copro.s: Add test for APSR_nzcv as a MRC operand.
* gas/arm/copro.d: Change pc in MRC to disassemble as APSR_nzcv. Also
add disassembly for test added in copro.s
2010-09-17 Tejas Belagod <tejas.belagod@arm.com>
* arm_dis.c (coprocessor_opcodes): Add MRC entry for APSR_nzcv.
gdbadmin [Fri, 17 Sep 2010 00:00:32 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Fri, 17 Sep 2010 00:00:04 +0000 (00:00 +0000)]
daily update
Alan Modra [Thu, 16 Sep 2010 23:55:10 +0000 (23:55 +0000)]
PR gas/12011
* config/obj-elf.c (obj_elf_parse_section_letters): Correct test
for error return from md_elf_section_letter.
* config/tc-alpha.c (alpha_elf_section_letter): Correct error message.
* config/tc-i386.c (x86_64_section_letter): Likewise.
* config/tc-ia64.c (ia64_elf_section_letter): Likewise.
* config/tc-mep.c (mep_elf_section_letter): Likewise.
* gas/elf/bad-section-flag.d, * gas/elf/bad-section-flag.err,
* gas/elf/bad-section-flag.s: New test.
* gas/elf/elf.exp: Run it.
Jan Kratochvil [Thu, 16 Sep 2010 19:20:51 +0000 (19:20 +0000)]
gdb/
* charset.c (wchar_iterate) <EILSEQ>: Return any possibly converted
characters.
Cary Coutant [Thu, 16 Sep 2010 15:52:15 +0000 (15:52 +0000)]
* script_sections.cc (class Memory_region): Remove "NULL" from
vector initializations.
Phil Muldoon [Thu, 16 Sep 2010 13:47:55 +0000 (13:47 +0000)]
2010-09-16 Phil Muldoon <pmuldoon@redhat.com>
PR mi/11407
* mi/mi-cmd-stack.c (list_args_or_locals): Catch exceptions from
read_var_value and common_val_print and print a warning.
2010-09-16 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
PR mi/11407
* gdb.mi/dw2-ref-missing-frame-func.c: New File.
* gdb.mi/dw2-ref-missing-frame-main.c New File.
* gdb.mi/dw2-ref-missing-frame.S New File.
* gdb.mi/dw2-ref-missing-frame.exp New File.
Alan Modra [Thu, 16 Sep 2010 10:51:41 +0000 (10:51 +0000)]
* ld-elf/orphan-region.d: xfail for spu.
* ld-elf/relocatable.d: xfail for hppa.
Alan Modra [Thu, 16 Sep 2010 10:36:00 +0000 (10:36 +0000)]
* elf32-spu.c (spu_elf_size_sections): Omit fixups for non-alloc
sections.
(spu_elf_create_sections): Mark .fixup with SEC_LINKER_CREATED and
set dynobj.
(spu_elf_finish_dynamic_sections): New function.
(elf_backend_finish_dynamic_sections): Define.
Alan Modra [Thu, 16 Sep 2010 00:42:00 +0000 (00:42 +0000)]
* binutils-all/i386/i386.exp: Don't run on linuxaout.
Alan Modra [Thu, 16 Sep 2010 00:39:11 +0000 (00:39 +0000)]
* gas/all/redef3.d: Don't run on arc.
* gas/i386/i386.exp: Don't run intel-got32 on linuxaout. Move
x86_64 mingw exclusions to equivalent elf only block of tests.
Alan Modra [Thu, 16 Sep 2010 00:28:57 +0000 (00:28 +0000)]
* ld-elf/group3b.d: Disable for generic linker targets.
* ld-elf/linkonce2.d: Likewise.
* ld-scripts/empty-address-2a.d: Disable for frv and aout,oldld.
* ld-scripts/empty-address-2b.d: Likewise.
* ld-scripts/rgn-at5.s: Don't use .word.
* ld-scripts/rgn-at5.d: Update.
Alan Modra [Thu, 16 Sep 2010 00:06:12 +0000 (00:06 +0000)]
bfd/
* elf.c (bfd_elf_get_default_section_type): Don't test SEC_NEVER_LOAD.
* elflink.c (elf_link_input_bfd): Likewise.
ld/
* ld.texinfo (NOLOAD): Do not erroneously state that contents will
appear in output file.
* ldlang.c (lang_add_section): Clear SEC_HAS_CONTENTS on noload
unless SEC_COFF_SHARED_LIBRARY.
(map_input_to_output_sections): Don't set SEC_HAS_CONTENTS for noload
output sections.
(lang_size_sections_1): Don't test SEC_NEVER_LOAD when deciding
to update dot in region. Ditto when setting SEC_ALLOC if dot
advanced due to assignment.
* ldwrite.c (build_link_order): Don't test SEC_NEVER_LOAD.
gdbadmin [Thu, 16 Sep 2010 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 16 Sep 2010 00:00:04 +0000 (00:00 +0000)]
daily update
Jan Kratochvil [Wed, 15 Sep 2010 22:53:53 +0000 (22:53 +0000)]
gdb/
* MAINTAINERS (GLOBAL MAINTAINERS) <Jan Kratochvil>: Move the entry to
keep the list in alphabetical order. Use longer e-mail address.
Tom Tromey [Wed, 15 Sep 2010 22:26:25 +0000 (22:26 +0000)]
* MAINTAINERS (GLOBAL MAINTAINERS): Add Jan Kratochvil.
Tom Tromey [Wed, 15 Sep 2010 20:18:47 +0000 (20:18 +0000)]
* charset.c (iconv_open): New define.
(iconv): Likewise.
(iconv_close): Likewise.
(phony_iconv_open): Add "phony_" prefix.
(phony_iconv_close): Likewise.
(phony_iconv): Likewise.
* gdb_wchar.h: Check _LIBICONV_VERSION, __STDC_ISO_10646__.
Change how INTERMEDIATE_ENCODING is defined.
Kai Tietz [Wed, 15 Sep 2010 19:50:13 +0000 (19:50 +0000)]
Fix intend
Kai Tietz [Wed, 15 Sep 2010 19:48:52 +0000 (19:48 +0000)]
ChangeLog gas
2010-09-15 Kai Tietz <kai.tietz@onevision.com>
* config/obj-coff-seh.c (seh_validate_seg): New funtion.
(obj_coff_seh_endproc): Add check for segment.
(obj_coff_seh_endprologue): Likewise.
(obj_coff_seh_pushreg): Likewise.
(obj_coff_seh_pushframe): Likewise.
(obj_coff_seh_save): Likewise.
(obj_coff_seh_setframe): Likewise.
ChangeLog gas/testsuite
2010-09-15 Kai Tietz <kai.tietz@onevision.com>
* gas/pe/pe.exp: Add new test.
* gas/pe/seh-x64-err-1.l: New.
* gas/pe/seh-x64-err-1.s: New.
Kai Tietz [Wed, 15 Sep 2010 19:43:56 +0000 (19:43 +0000)]
ChangeLog gas
2010-09-15 Kai Tietz <kai.tietz@onevision.com>
* config/obj-coff-seh.h (seh_context): New member code_seg.
* config/obj-coff-seh.c: Implementing xdata/pdata section cloning
for link-once code-segment.
ChangeLog ld
2010-09-15 Kai Tietz <kai.tietz@onevision.com>
* scripttempl/pep.sc: Add .xdata segment and
put into .pdata all segments beginning with .pdata.
ChangeLog gas/testsuite
2010-09-15 Kai Tietz <kai.tietz@onevision.com>
* gas/pe/pe.exp: Add peseh-x64-4,5,6 tests.
* gas/pe/peseh-x64-4.s: New.
* gas/pe/peseh-x64-4.d: New.
* gas/pe/peseh-x64-5.d: New.
* gas/pe/peseh-x64-6.d: New.
Tom Tromey [Wed, 15 Sep 2010 19:31:59 +0000 (19:31 +0000)]
2010-09-15 Paul Bolle <pebolle@tiscali.nl>
* gdb.texinfo (Character Sets): Correctly reference host-charset
in example.
Doug Evans [Wed, 15 Sep 2010 18:14:47 +0000 (18:14 +0000)]
* dwarf2read.c (struct die_info): Fix comment.
Cary Coutant [Wed, 15 Sep 2010 18:10:31 +0000 (18:10 +0000)]
* incremental.cc (Output_section_incremental_inputs::write_info_blocks):
Resolve forwarding symbols.
Doug Kwan [Wed, 15 Sep 2010 17:39:57 +0000 (17:39 +0000)]
2010-09-15 Doug Kwan <dougkwan@google.com>
* gold/testsuite/script_test_3.t: Add ARM special sections.
* gold/testsuite/script_test_4.t: Same.
* gold/testsuite/script_test_5.t: Same.
* gold/testsuite/script_test_6.t: Same.
* gold/testsuite/script_test_7.t: Same.
* gold/testsuite/script_test_7.t: Same.
* gold/testsuite/thumb_blx_out_of_range.s: Fix instruction alignment.
Kai Tietz [Wed, 15 Sep 2010 17:27:30 +0000 (17:27 +0000)]
2010-09-15 Kai Tietz <kai.tietz@onevision.com>
* pei-x86_64.c (pex64_get_unwind_info): Reorgnized.
(pex64_get_scope_entry): Removed.
(find_next_xdata_or_end): New helper.
(pex64_dump_xdata): Reworked.
(pex64_bfd_print_pdata): Add checking for
valid pdata sorting and values. Reworked
output.
H.J. Lu [Wed, 15 Sep 2010 17:12:59 +0000 (17:12 +0000)]
Handle NULL iostream in bfd_plugin_object_p.
2010-09-15 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/12004
* plugin.c (bfd_plugin_object_p): Handle NULL iostream.
H.J. Lu [Wed, 15 Sep 2010 17:10:15 +0000 (17:10 +0000)]
Pass "plugin" as target for "ar --plugin" when opening a BFD file.
2010-09-15 H.J. Lu <hongjiu.lu@intel.com>
* ar.c (plugin_target): New.
(main): Set plugin_target to "plugin" for --plugin.
(open_inarch): Initialize target to plugin_target.
(replace_members): Pass plugin_target to ar_emul_replace
and ar_emul_append.
* binemul.h (ar_emul_append): Add a target argument.
(ar_emul_default_append): Likewise.
(ar_emul_replace): Likewise.
(ar_emul_default_replace): Likewise.
(bin_emulation_xfer_struct): Add a target argument to
ar_append and ar_replace.
* binemul.c (ar_emul_append): Updated. Pass target to bfd_openr.
(do_ar_emul_default_append): Likewise.
(ar_emul_default_append): Likewise.
(ar_emul_replace): Likewise.
(ar_emul_default_replace): Likewise.
Alan Modra [Wed, 15 Sep 2010 03:30:30 +0000 (03:30 +0000)]
PR 4606
* gcore.c (gcore_create_callback): Clear SEC_HAS_CONTENTS rather
than setting SEC_NEVER_LOAD on sections that need not be copied.
gdbadmin [Wed, 15 Sep 2010 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Wed, 15 Sep 2010 00:00:05 +0000 (00:00 +0000)]
daily update
Maciej W. Rozycki [Tue, 14 Sep 2010 23:49:04 +0000 (23:49 +0000)]
opcodes/
* mips-opc.c (mips_builtin_opcodes): Add "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb".
gas/testsuite/
* gas/mips/mips32r2-sync.d: New test for MIPS32r2 "sync"
instruction variants.
* gas/mips/octeon@mips32r2-sync.d: Likewise, Octeon version.
* gas/mips/mips32r2-sync.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
Tom Tromey [Tue, 14 Sep 2010 22:50:30 +0000 (22:50 +0000)]
* psympriv.h (add_psymbol_to_list, init_psymbol_list)
(start_psymtab_common, allocate_psymtab, discard_psymtab):
Declare.
* symfile.h (extend_psymbol_list): Remove.
(add_psymbol_to_list, init_psymbol_list, start_psymtab_common)
(allocate_psymtab, discard_psymtab): Move to psympriv.h.
* psymtab.c (extend_psymbol_list): Move earlier. Now static.
Cary Coutant [Tue, 14 Sep 2010 21:44:21 +0000 (21:44 +0000)]
* x86_64.cc (Target_x86_64::saw_tls_block_reloc_): Remove member.
(Target_x86_64::Relocate::relocate_tls): Replace check for
saw_tls_block_reloc_ with test for executable section.
Jan Kratochvil [Tue, 14 Sep 2010 21:28:53 +0000 (21:28 +0000)]
gdb/
* dwarf2read.c (dw2_map_ada_symtabs): Remove the internal_error.
Update the comment.
Kai Tietz [Tue, 14 Sep 2010 20:40:39 +0000 (20:40 +0000)]
2010-09-14 Kai Tietz <kai.tietz@onevision.com>
* pe-x86_64.c (COFF_SECTION_ALIGNMENT_ENTRIES): Make
.rdata, .data, and .text partial matched section names.
* pei-x86_64.c: Likewise.
Kai Tietz [Tue, 14 Sep 2010 20:25:34 +0000 (20:25 +0000)]
2010-09-14 Kai Tietz <kai.tietz@onevision.com>
* peXXigen.c (sort_x64_pdata): New helper.
(_bfd_XXi_final_link_postscript): Do pdata sorting.
Tom Tromey [Tue, 14 Sep 2010 19:39:59 +0000 (19:39 +0000)]
gdb
PR symtab/8399:
* dwarf2loc.c (locexpr_describe_location_piece): Don't call error
for unrecognized frame base expression.
gdb/testsuite
PR symtab/8399:
* gdb.threads/tls.exp: Remove kfail. Update expected output.
Tom Tromey [Tue, 14 Sep 2010 19:08:30 +0000 (19:08 +0000)]
gdb
PR exp/11803:
* value.c (value_static_field): Use value_of_variable.
gdb/testsuite
PR exp/11803:
* gdb.threads/tls.exp: Use C++.
(check_thread_local): Use K::another_thread_local.
* gdb.threads/tls.c (class K): New.
(another_thread_local): Now a member of K.
(spin): Update. No longer K&R C.
Jie Zhang [Tue, 14 Sep 2010 09:16:21 +0000 (09:16 +0000)]
* doc/c-arm.texi: Document -mcpu=cortex-m4.
Pierre Muller [Tue, 14 Sep 2010 08:01:12 +0000 (08:01 +0000)]
* m32r-rom.c: Replace winsock.h with winsock2.h header.
* remote-m32r-sdi.c: Replace winsock.h by winsock2.h.
Alan Modra [Tue, 14 Sep 2010 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Tue, 14 Sep 2010 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Sami Wagiaalla [Mon, 13 Sep 2010 20:41:05 +0000 (20:41 +0000)]
Fix PR 11992: C++ 'this' scope sometimes does not work
2010-09-13 Sami Wagiaalla <swagiaal@redhat.com>
PR symtab/11992:
* c-exp.y (classify_name): Check is_a_member_of_this before returning
UNKNOWN_CPP_NAME.
2010-09-13 Sami Wagiaalla <swagiaal@redhat.com>
* gdb.cp/koenig.cc: created class for testing member lookup.
* gdb.cp/koenig.exp: Added test for member lookup.
Joel Brobecker [Mon, 13 Sep 2010 20:37:34 +0000 (20:37 +0000)]
[NEWS] Announce gdbserver support for x86-lynxos
This patch adjusts the NEWS entry for the LynxOS gdbserver to include
x86-lynxos to the list of supported platforms.
gdb/ChangeLog:
* NEWS: Add x86-lynxos to the list of platforms supported by
gdbserver.
Jan Kratochvil [Mon, 13 Sep 2010 20:05:04 +0000 (20:05 +0000)]
gdb/testsuite/
Fix false FAILs on sourcetree topdir directory containing "kill".
* gdb.base/sigall.exp (test_one_sig) <advance to $nextsig>: Extend the
source line matching regexp.
Joel Brobecker [Mon, 13 Sep 2010 19:11:03 +0000 (19:11 +0000)]
Add support for x86 LynxOS
This patch adds support for x86 LynxOS (tested on LynxOS 5.0).
gdb/gdbserver/ChangeLog:
* lynx-i386-low.c: New file.
* configure.srv: Add handling of i[34567]86-*-lynxos* targets.
projects / platform / upstream / binutils.git / log