drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c

drm_plane_helper_check_update() isn't a transitional helper, so let's
rename it to drm_atomic_helper_check_plane_state() and move it into
drm_atomic_helper.c.

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc

Cc: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201619.6175-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()

drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.

We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/vmwgfx: Try to fix plane clipping

Try to fix the code to actually clip the plane to the crtc bounds
instead of the user provided crtc coordinates (which would be a no-op
since those are exactly the coordinates before clipping).

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Use drm_plane_helper_check_state()

Atomic drivers have no reason to use drm_plane_helper_check_update()
instead of drm_plane_helper_check_state(). So let's switch over.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Remove bogus crtc coords vs fb size check

Throw away the bugs crtc coords vs. fb size check. Crtc coords don't
define the viewport inside the fb, that's a job for the src coords,
which have been checked by the core already.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101182920.14386-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

gpu: gma500: remove unneeded DRIVER_LICENSE #define

There is no need to #define the license of the driver, just put it in
the MODULE_LICENSE() line directly as a text string.

This allows tools that check that the module license matches the source
code license to work properly, as there is no need to unwind the
unneeded dereference, especially when the string is defined in a .h file
far away from the .c file it is used in.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Reported-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117141632.GA17880@kroah.com

drm: don't link DP aux i2c adapter to the hardware device node

The i2c adapter on DP AUX is purely a software construct. Linking
it to the device node of the parent device is wrong, as it leads to
2 devices sharing the same device node, which is bad practice, as
well as the i2c trying to populate children of the i2c adapter by
looking at the child device nodes of the parent device.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170113173630.22138-1-l.stach@pengutronix.de

drm/panel: simple: Add Mitsubishi AA070MC01 panel support

The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in
8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector).

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1508537917-1723-1-git-send-email-lukma@denx.de

drm/panel: simple: Add Tianma TM070RVHG71 panel support

The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected
via LVDS and can be supported by the simple-panel binding.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107153058.5554-1-lukma@denx.de

drm/bridge/sii8620: add DVI mode support

If the sink device is in HDMI mode, enable infoframe interrupt in scdt
irq handle function else call start_video function immediately, because
in DVI mode, there is no infoframe interrupt provided.

Rename start_hdmi function to start_video and get rid of the old
start_video function. In start_video, if the sink is DVI and mode is
MHL1 or MHl2, write appropriate values to registers else the path
should remain the same as in HDMI mode.

Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510224822-7732-1-git-send-email-m.purski@samsung.com

drm/bridge/sii8620: filter unsupported modes

The maximum pixel clock depends on the version of the connected MHL
adapter. Add mode_valid callback to filter out modes with too high pixel
clock to avoid failure in mode_fixup later.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109102831.19844-1-m.szyprowski@samsung.com

drm/rockchip: vop: add rk3126 vop support

RK3126 vop register layout is similar with rk3036, so some feature
can reuse with rk3036.

RK3126 support two overlay plane and one hwc plane, max output
resolution is 1080p. it support IOMMU, and its IOMMU same as
rk3288's

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Mark Yao <mark.yao@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510658857-90299-1-git-send-email-hjc@rock-chips.com

dt-bindings: add document for rk3126-vop

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1510658855-90223-1-git-send-email-hjc@rock-chips.com

drm: gem_cma_helper.c: Allow importing of contiguous scatterlists with nents > 1

drm_gem_cma_prime_import_sg_table() will fail if the number of entries
in the sg_table > 1. However, you can have a device that uses an IOMMU
engine and can map a discontiguous buffer with multiple entries that
have consecutive sg_dma_addresses, effectively making it contiguous.
Allow for that scenario by testing the entries in the sg_table for
contiguous coverage.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110133310.1225-1-Liviu.Dudau@arm.com

drm/atomic-helper: always track connector commits, too

It's useful for syncing async connector work like link retraining.

v2: Make it work (Manasi&Ville)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110105313.16718-1-daniel.vetter@ffwll.ch

drm: Fix kerneldocs for drm_plane modifiers

Add the missing kerneldoc for modifiers and modifier_count.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191021.15591-3-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/gem-cma-helper: Fix kerneldocs

Use the correct name for the function argument in the docs.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191021.15591-1-ville.syrjala@linux.intel.com
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm: Fix modifiers_property kernel doc

The member is called 'modifiers_property' instead of 'modifiers'. Adjust
the kernel docs to match.

Cc: dri-devel@lists.freedesktop.org
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-11-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

dma-buf: try to replace a signaled fence in reservation_object_add_shared_inplace

The amdgpu issue to also need signaled fences in the reservation objects should
be fixed by now.

Optimize the handling by replacing a signaled fence when adding a new
shared one.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114142436.1360-2-christian.koenig@amd.com

dma-buf: keep only not signaled fence in reservation_object_add_shared_replace v3

The amdgpu issue to also need signaled fences in the reservation objects
should be fixed by now.

Optimize the list by keeping only the not signaled yet fences around.

v2: temporary put the signaled fences at the end of the new container
v3: put the old fence at the end of the new container as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114142436.1360-1-christian.koenig@amd.com

drm/debugfs: Fix framebuffer debugfs file init

The introduction of: drm/framebuffer: Add framebuffer debugfs file
broke vgem. That patch assumed that all drivers had initialized the
dev->mode_config.fb_lock mutex which happens in drm_mode_config_init().
vgem doesn't need to call drm_mode_config_init().

Fix this by only creating the framebuffer debugfs file for modesetting
drivers.

Fixes: 45d58b40292b ("drm/framebuffer: Add framebuffer debugfs file")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113231201.26177-1-noralf@tronnes.org

dma-buf: add reservation_object_lock_interruptible()

That's the only wrapper function missing and necessary to cleanup TTM.

Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171109085909.1653-3-christian.koenig@amd.com

drm/cma-helper: Remove drm_fb_cma_debugfs_show()

drm_fb_cma_debugfs_show() and drm_gem_cma_describe() are superseded
by drm_framebuffer_debugfs_init() and drm_gem_cma_print_info().

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-13-noralf@tronnes.org

drm/tinydrm: Use drm_gem_cma_print_info()

There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer

Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-12-noralf@tronnes.org

drm/tilcdc: Use drm_gem_cma_print_info()

There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer

Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-11-noralf@tronnes.org

drm/arm/hdlcd: Use drm_gem_cma_print_info()

There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer

Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-10-noralf@tronnes.org

drm/arc: Use drm_gem_cma_print_info()

There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer

Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-9-noralf@tronnes.org

drm/cma-helper: Add drm_gem_cma_print_info()

Add drm_gem_cma_print_info() for debugfs printing
struct drm_gem_cma_object specific info.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-8-noralf@tronnes.org

drm/cma-helper: Turn to_drm_gem_cma_obj() into a macro

This allows the argument to be a const.

The other option was to keep it an inline function and make the argument
a const:

static inline struct drm_gem_cma_object *
to_drm_gem_cma_obj(const struct drm_gem_object *gem_obj)
{
return container_of(gem_obj, struct drm_gem_cma_object, base);
}

This will happily return a non-const pointer to the drm_gem_cma_object
based on a const pointer to the contained drm_gem_object, thus creating
const-safety problems.

There was an attempt to fix the problem in the container_of() macro
itself (see https://lkml.org/lkml/2017/5/19/381) but the patch seems to
have fallen through the cracks. It would require turning this inline
function into a macro.

By making this a macro now, we will benefit from a possible future
enhancement of container_of(). We don't loose type checking by doing
this, container_of() takes care of that.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-7-noralf@tronnes.org

drm/atomic: Use drm_framebuffer_print_info()

Use drm_framebuffer_print_info() to print framebuffer info in
drm_atomic_plane_print_state(). This will give optional GEM info as well.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-6-noralf@tronnes.org

drm/framebuffer: Add framebuffer debugfs file

Add debugfs file that dumps info about the framebuffers and its planes.
Also dump info about any connected gem object(s).

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-5-noralf@tronnes.org

drm/print: Add drm_printf_indent()

Add drm_printf_indent() that adds tab indentation according to argument.
Indentation overflow is marked with an X.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-4-noralf@tronnes.org

drm/framebuffer: drm_framebuffer_read_refcount() constify argument

Constify argument so functions calling into this take a const argument.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-3-noralf@tronnes.org

drm/vma-manager: drm_vma_node_start() constify argument

Constify argument so functions calling into this take a const argument.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-2-noralf@tronnes.org

virtgpu: remove redundant task_comm copying

Remove redundant task name copying because:

1. task->comm is already NUL-terminated
2. virtio_gpu_context_create() trims passed dbgname anyway

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: http://patchwork.freedesktop.org/patch/msgid/588612bbc672e8b598e10f79fcbc041122e844ba.1504202471.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm: qxl: remove pr_info message, stops log spamming

Simply mmap'ing /dev/dri/card0 repeatedly will spam the kernel
log with qxl_mmap information messages. The following example code
illustrates this:

int main(void)
{
int fd = open("/dev/dri/card0", O_RDONLY);
if (fd == -1)
err(1, "open failed");

for (;;) {
void *m = mmap(NULL, 4096, PROT_READ,
MAP_SHARED, fd, 0);
if (m != MAP_FAILED)
munmap(m, 4096);
}
}

Stop the spamming by removing the pr_info message. Since the mmap'ing
returns -EINVAL there is no need for the pr_info message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170912173422.14062-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/cirrus: add create_handle support.

Add create_handle support to cirrus fb. Without this, screenshot tool
in chromium OS can't work.

Signed-off-by: Lepton Wu <ytht.net@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171108185537.56167-1-ytht.net@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: add create_handle support.

Add create_handle support to virtio fb. Without this, screenshot tool
in chromium OS can't work.

Signed-off-by: Lepton Wu <ytht.net@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20171108184209.46211-1-ytht.net@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dma-buf: Use rcu_assign_pointer() to set rcu protected pointers

Use rcu_assign_pointer() when setting an rcu protected pointer.
This gets rid of another sparse warning.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-5-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>

drm/syncobj: Use proper methods for accessing rcu protected pointers

Use rcu_dereference_protected() and rcu_assign_pointer() for accessing
the rcu protected syncobj->fence pointer. This eliminates several sparse
warnings.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>

dma-buf/fence: Sparse wants __rcu on the object itself

In order to silence sparse in dma_fence_get_rcu_safe(), we need to mark
the incoming fence object as being RCU protected and not the pointer to
the object.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
[vsyrjala: s/silent/silence/ in commit message]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/syncobj: Mark up the fence as an RCU protected pointer

We take advantage of that syncobj->fence is an RCU-protected pointer, and
so sparse complains that it is lacking annotation.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-media@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102200336.23347-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/vc4: Reject HDMI modes with too high of clocks.

Peter Robinson reported issues on Fedora with 4k monitors not having
their modes filtered down to 1920x1080 on Raspberry Pi.

v2: Fix vc5 typo in place of vc4.

Cc: Peter Robinson <pbrobinson@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920225935.14566-1-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)

drm: Update docs for legacy kms state

Point at the equivalent atomic state and explain that atomic drivers
shouldn't really depend upon legacy state.

Motivated by questions from Manasi about how this all is supposed to
work.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108203007.12274-1-daniel.vetter@ffwll.ch

drm: sti: remove vtg_remove

vtg_remove does nothing just remove it

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1510146367-25329-1-git-send-email-benjamin.gaignard@linaro.org

drm: sti: remove useless fields from vtg structure

Drivers are registered on platform bus so the private list
could be replace by a call to of_find_device_by_node().
Changing this also makes dev, np and link fields useless
in vtg structure.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1510146255-24982-1-git-send-email-benjamin.gaignard@linaro.org

drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2.

This introduces a slight behavioral change to rmfb. Instead of
disabling a crtc when the primary plane is disabled, we try to
preserve it.

Apart from old versions of the vmwgfx xorg driver, there is
nothing depending on rmfb disabling a crtc.

Vmwgfx' and simple kms helper atomic implementation rejects CRTC
enabled without plane, so we can do this safely.

If the atomic commit is rejected by the driver then we will still
fall back to the old behavior and turn off the crtc.

Changes since v1:
- Restart completely when rmfb with crtc on fails (Sean Paul).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101150433.10777-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/edid: make drm_edid_to_eld() static

This is no longer needed outside of drm_edid.c.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c0be7b97d0144ed0419c87ac42b30f5835ca7e6.1509545641.git.jani.nikula@intel.com

drm/drivers: drop redundant drm_edid_to_eld() calls

drm_add_edid_modes() now fills in the ELD automatically, so the calls to
drm_edid_to_eld() are redundant. Remove them.

All the other places are obvious, but nv50 has detached
drm_edid_to_eld() from the drm_add_edid_modes() call.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0959ca02b983afc9e74dd9acd190ba6e25f21678.1509545641.git.jani.nikula@intel.com

drm/edid: build ELD in drm_add_edid_modes()

Call drm_edid_to_eld() from drm_add_edid_modes() to fill in the ELD
automatically. There's no harm in doing this for connectors that do not
support audio.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/551b2e1cf19be04c510e7865d7539cfc2f54ea89.1509545641.git.jani.nikula@intel.com

drm/edid: abstract connector ELD clearing

Preparation for future work. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95e83e7a62566b65a56c8cb5038ddf0c6b8e5e95.1509545641.git.jani.nikula@intel.com

drm/edid: set ELD connector type in drm_edid_to_eld()

Since drm_edid_to_eld() knows the connector type, we can set the type in
ELD while at it. Most connectors this gets called on are not DP
encoders, and with the HDMI type being 0, this does not change behaviour
for non-DP.

For i915 having this in place earlier would have saved a considerable
amount of debugging that lead to the fix 2d8f63297b9f ("drm/i915: always
update ELD connector type after get modes"). I don't see other drivers,
even the ones calling drm_edid_to_eld() on DP connectors, setting the
connector type in ELD.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.com

drm/edid: use macros for ELD offsets and values

We have the macros, use them. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36f00f018280a04d2db806574d337f7512986c86.1509545641.git.jani.nikula@intel.com

drm/selftests/mm: Insert cond_resched() between insert modes

kbuilder has begun running the selftests and reported a soft-lockup
inside __igt_insert(), so break up the test loop over different modes
with another call to cond_resched().

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107104131.5923-1-chris@chris-wilson.co.uk

drm/stm: ltdc: add a 2nd endpoint

ltdc can have up to 2 endpoints:
 - dpi external gpios: for rgb panels or external bridge ICs.
 - dpi internal ios: connected internally to dsi.

Note: Refer to the reference manual to know if the dsi is
present on your device.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1509018489-19641-3-git-send-email-philippe.cornu@st.com

dt-bindings: display: stm32: add a 2nd endpoint

ltdc can have up to 2 endpoints:
 - dpi external gpios: for rgb panels or external bridge ICs.
 - dpi internal ios: connected internally to dsi.

Note: Refer to the reference manual to know if the dsi is
present on your device.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1509018489-19641-2-git-send-email-philippe.cornu@st.com

drm/stm: checkpatch strict minor updates

Minor fixes detected with "scripts/checkpatch.pl --strict"

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1509013473-18365-1-git-send-email-philippe.cornu@st.com

drm/stm: dsi: Rename driver name

Rename the driver name from "dw_mipi_dsi-stm" to
"stm32-display-dsi" for a better readability
in /sys/bus/platform/drivers entries.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1509012290-16906-1-git-send-email-philippe.cornu@st.com

drm: via: use ktime_get() instead of do_gettimeofday

We want to remove uses of do_gettimeofday() from the kernel since the
resulting timeval structure overflows in 2038. This is not a problem for
this particular use, but do_gettimeofday() is also not an appropriate
method for measuring time intervals, since it requires a conversion into
microseconds and is complicated to work with.

ktime_get() is a better replacement, as it works with the monontonic
kernel timebase and requires a minimum of computation.

I'm slightly changing the output from microseconds to nanoseconds here,
to avoid introducing a new division operation. This should be fine
since the value is only used for debugging.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171104212131.2939989-1-arnd@arndb.de

drm: Print the fb dimensions when the src coord check fails

When debugging bad plane source coordinates it helps to have an
idea of what the framebuffer dimensions are.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101183533.28466-1-ville.syrjala@linux.intel.com

drm/drm_mm.h: Fix the name of the referenced function in comment

drm_mm_insert_node_generic() is a simplified version of
drm_mm_insert_node_in_range(), update comment to reflect correct
function name.

Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101140445.2798-1-Liviu.Dudau@arm.com

dma-buf: Cleanup comments on dma_buf_map_attachment()

Mappings need to be unmapped by calling dma_buf_unmap_attachment() and
not by calling again dma_buf_map_attachment(). Also fix some spelling
mistakes.

Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101140630.2884-1-Liviu.Dudau@arm.com

drm: Spelling fixes

Minor spelling fix for 'monster' and replace 'on' with 'own' in
comments.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101140436.2743-1-Liviu.Dudau@arm.com

drm/vc4: Fix wrong printk format in vc4_bo_stats_debugfs()

vc4->purgeable.size and vc4->purgeable.purged_size are size_t fields
and should be printed with a %zd specifier.

Fixes: b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101095731.14878-1-boris.brezillon@free-electrons.com

drm/drm_vma_manager.c: Remove useless goto statement

Commit db2395eccf08i ("drm: Convert drm_vma_manager to embedded
interval-tree in drm_mm") removed a line in drm_vma_offset_add() function that
makes checking the result of calling drm_mm_insert_node() and the goto
call redundant. Rework the function (as suggested by Chris Wilson) to
eliminate the need for the goto and associated label.

v2: rewrite function to remove all goto statements.

Fixes: db2395eccf08i ("drm: Convert drm_vma_manager to embedded interval-tree in drm_mm")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101144458.5353-1-Liviu.Dudau@arm.com

drm/fb-helper: Add .last_close and .output_poll_changed helpers

This adds helpers for the drm_driver->last_close and the
drm_mode_config_funcs->output_poll_changed callbacks.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030153951.56269-4-noralf@tronnes.org

drm: Add drm_device->fb_helper pointer

drm_fb_helper is *the* way of doing fbdev emulation so add a pointer to
struct drm_device. This makes it possible to add callback helpers for
.last_close and .output_poll_changed further reducing fbdev emulation
footprint in drivers. The pointer is set by drm_fb_helper_init() and
cleared by drm_fb_helper_fini().

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030153951.56269-3-noralf@tronnes.org

drm/fb-helper: Handle function NULL argument

Make functions tolerate that the drm_fb_helper argument is NULL.
This is useful for drivers that continue probing when fbdev emulation
fails and not having to do this check themselves.
Update docs for functions that already handles this.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030153951.56269-2-noralf@tronnes.org

MAINTAINERS: Gustavo as drm-misc co-maintainer

Gustavo volunteered to become a drm-misc co-maintainer, he'll take
care of 4.16 to get started.

Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030131028.11285-1-daniel.vetter@ffwll.ch

drm/TODO: Clarify DRM_DEV_* conversion

Not everyone agrees this is the best thing, so make it really clear
that maintainers need to be asked first, then the conversion. We've
had a few newbies that did this the other way round, got their patches
rejected, which isn't the best newbie experience.

Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030131536.11654-1-daniel.vetter@ffwll.ch

drm: gma500: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024151609.GA104501@beast

drm/panel: rpi-touchscreen: propagate errors in rpi_touchscreen_i2c_read()

There is one caller which checks whether rpi_touchscreen_i2c_read()
returns negative error codes.  Currently it can't because negative
error codes are truncated to u8, but that's easy to fix if we change the
type to int.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171020002845.kar2wg7gqxg7tzqi@mwanda
Reviewed-by: Eric Anholt <eric@anholt.net>

drm/vc4: Convert timers to use timer_setup()

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171024151648.GA104538@beast
Reviewed-by: Eric Anholt <eric@anholt.net>

drm: Enable pr_debug() for drm_printer

pr_debug() is conditionally compiled and requires either
dynamic-debugging to be enabled or for the code to opt-in using #define
DEBUG. Since drm_print provides a central debugging facility using
pr_debug(), make sure it will always produce output.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027110602.31519-1-chris@chris-wilson.co.uk

gma500: mmu: unmap the correct address

The function kunmap_atomatic() is called on the same variable twice,
i.e. pt->v. In the second call, its parameter should be variable v
rather than pt->v.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1509256512-5962-1-git-send-email-bianpan2016@163.com

drm: virtio: replace reference/unreference with get/put

DRM core uses reference/unreference suffixes for refcounting
functions, but kernel uses get/put (e.g. kref_get/put()).
Replace reference/unreference with get/put for consistency
and also it's shorter.

The following cocci script was used to generate the patch:

@@
expression e;
@@

(
-drm_gem_object_reference(e);
+drm_gem_object_get(e);
|
-drm_gem_object_unreference(e);
+drm_gem_object_put(e);
|
-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);
)

Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1508776686-29664-1-git-send-email-aastha.gupta4104@gmail.com

drm/gem: Remove trailing whitespace

Remove two trailing spaces.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171026165731.5793-4-noralf@tronnes.org

drm/dp: Bit definition for D3 power state that keeps AUX fully powered

DPCD 600h - SET_POWER & SET_DP_PWR_VOLTAGE defines power state

101 = Set Main-Link for local Sink device and all downstream Sink
devices to D3 (power-down mode), keep AUX block fully powered, ready to
reply within a Response Timeout period of 300us.

This state is useful in a MST dock + MST monitor configuration that
doesn't wake up from D3 state.

v2: Use spaces instead of tabs (Jani)

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502475008-2035-1-git-send-email-dhinakaran.pandiyan@intel.com

drm/tinydrm: Replace list_for_each with list_for_each_entry

Replace use of list_for_each with list_for_each_entry to simplify the
code and remove variables that are used only in list_for_each.
Done with following coccinelle patch:

@r@
identifier fn,i,f,p;
expression e;
iterator name list_for_each, list_for_each_entry;
type T;
@@

fn(...) {
++ T *i;
  <+...
- list_for_each(p,e)
+ list_for_each_entry(i,e,f)
  {
              ...
-   T *i = list_entry(p,T,f);
                  ...
   }
   ...+>
}

@@
identifier r.fn,r.p;
@@

fn(...) {
  ...
- struct list_head *p;
  ... when != p
}

@@
identifier r.fn,r.i,r.f;
expression r.e;
statement S;
@@

fn(...) {
  <...
  list_for_each_entry(i,e,f)
- {
  S
- }
  ...>
}

@s@
identifier i,f,p;
expression e;
type T;
@@

- list_for_each(p,e)
+ list_for_each_entry(i,e,f)
  {
    ... when != T *i;
-   i = list_entry(p,T,f);
    ...
  }

@@
identifier s.p;
@@

- struct list_head *p;
  ... when != p

@@
identifier s.i,s.f;
expression s.e;
statement S;
@@

  list_for_each_entry(i,e,f)
- {
  S
- }

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014202823.29230-1-harshasharmaiitr@gmail.com

drm/rockchip: Fix build warning in analogix_dp-rockchip.c

I didn't catch this before applying, just right after (of course).

Fixes:
../drivers/gpu/drm/rockchip/analogix_dp-rockchip.c: In function
‘rockchip_dp_of_probe’:
../drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:276:6: warning:
unused variable ‘ret’ [-Wunused-variable]
  int ret;
        ^~~

Fixes: 102712a32ff5 ("drm/rockchip: analogix_dp: Remove unnecessary init
code")
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171020172557.54900-1-seanpaul@chromium.org

drm/print: Update old comment style

Remove old comment style used by doxygen.
And remove comment left from commit 99cdb35e787b ("drm/doc: move printf
helpers out of drmP.h") after refactoring drmP.h.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/4d89eef3945dbffd402d2ecdc130108b0565c158.1508297716.git.hamohammed.sa@gmail.com

drm: Move debug macros out of drmP.h

This patch extract DRM_* debug macros from drmP.h to drm_print.h and
move printing related functions used by these macros from drm_drv.[hc]
to drm_print.[hc].

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/4020bc7c5ffad2af516919f78bb837c7f366b82b.1508297716.git.hamohammed.sa@gmail.com

drm/rockchip: analogix_dp: Remove unnecessary init code

Remove unnecessary init code, since we would do it in the power_on()
callback.

Also move of parse code to probe().

Fixes: 9e32e16e9e98 ("drm: rockchip: dp: add rockchip platform dp driver")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019034812.13768-3-jeffy.chen@rock-chips.com

drm/vc4: Fix sleeps during the IRQ handler for DSI transactions.

VC4's DSI1 has a bug where the AXI connection is broken for 32-bit
writes from the CPU, so we use the DMA engine to DMA 32-bit values
into registers instead.  That sleeps, so we can't do it from the top
half.

As a solution, use an interrupt thread so that all our writes happen
when sleeping is is allowed.

v2: Use IRQF_ONESHOT (suggested by Boris)
v3: Style nitpicks.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014001255.32005-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v2)

drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl

This ioctl will allow us to purge inactive userspace buffers when the
system is running out of contiguous memory.

For now, the purge logic is rather dumb in that it does not try to
release only the amount of BO needed to meet the last CMA alloc request
but instead purges all objects placed in the purgeable pool as soon as
we experience a CMA allocation failure.

Note that the in-kernel BO cache is always purged before the purgeable
cache because those objects are known to be unused while objects marked
as purgeable by a userspace application/library might have to be
restored when they are marked back as unpurgeable, which can be
expensive.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171019125748.3152-1-boris.brezillon@free-electrons.com

drm/panel: simple: add Toshiba LT089AC19000

Only exposes a single mode and not a complete display timing, as
the datasheet is rather vague about the minimum/maximum values.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171018172240.8772-1-l.stach@pengutronix.de

dma-fence: remove duplicate word in comment

Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1508333423-5394-1-git-send-email-frank.binns@imgtec.com

drm/panel: simple: add delays for Innolux AT043TN24

The delays between video data and backlight enable and between backlight
disable and end of video data are given as >= 160 ms in the datasheet.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-3-p.zabel@pengutronix.de

drm/panel: simple: add bus flags for Innolux AT043TN24

For LCD interface controllers that support configuring polarity of
pixel clock and data enable signal, specify bus flags in the panel
descriptor.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-2-p.zabel@pengutronix.de

drm/panel: simple: fix vertical timings for Innolux AT043TN24

The vsync length should be 10 lines, as specified in the data sheet.
This gets the actual refresh rate closer to nominal 60 Hz given the
9 MHz pixel clock.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-1-p.zabel@pengutronix.de

drm/atomic-helper: check that drivers call drm_crtc_vblank_off

At least when they have vblank support they need to call this, or the
vblank core will happily call into their crtc->enable_vblank callback
even when the crtc is off. Which leads to a boom when the clocks are
off on most hardware (besides the inevitable confusion in the
book-keeping).

The consistency checks in drm_vblank.c will then make sure that
vblank_off/on calls are balanced, and if drivers forget to re-enable
it all the commits will stall, so I think we're covered.

It'd be nice to be able to place this check outside of commit helpers,
but tha's not really possible (due to nonblocking commits and all
that). Placing it into atomic helpers should at least cover most
drivers.

Also note that vblank support is still optional (for virtual drivers,
which tend to not have this), check for that.

v2: Fixup the handling for vblank_put (Rob).

Cc: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017152714.6849-1-daniel.vetter@ffwll.ch

drm: some KMS todo ideas

Inspired by discussions with Keith and Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Keith Packard <keithp@keithp.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017162918.8380-1-daniel.vetter@ffwll.ch

vgaarb: Factor out EFI and fallback default device selection

The default VGA device is normally set in vga_arbiter_add_pci_device() when
we call it for the first enabled device that can be accessed with the
legacy VGA resources ([mem 0xa0000-0xbffff], etc.)

That default device can be overridden by an EFI device that owns the boot
framebuffer.  As a fallback, we can also select a VGA device that can't be
accessed via legacy VGA resources, or a VGA device that isn't even enabled.

Factor out this EFI and fallback selection from vga_arb_device_init() into
a separate vga_arb_select_default_device() function.  This doesn't change
any behavior, but it untangles the "bridge control possible" checking and
messages from the default device selection.

Tested-by: Zhou Wang <wangzhou1@hisilicon.com> # D05 Hisi Hip07, Hip08
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013034729.14630.30419.stgit@bhelgaas-glaptop.roam.corp.google.com

vgaarb: Select a default VGA device even if there's no legacy VGA

Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is
behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter
never selects it as the default, which means Xorg auto-detection doesn't
work.

VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g.,
[mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are
not configurable by BARs.  Consequently, multiple VGA devices can conflict
with each other.  The VGA arbiter avoids conflicts by ensuring that those
legacy resources are only routed to one VGA device at a time.

The arbiter identifies the "default VGA" device, i.e., a legacy VGA device
that was used by boot firmware.  It selects the first device that:

  - is of PCI_CLASS_DISPLAY_VGA,
  - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and
  - has PCI_BRIDGE_CTL_VGA set in all upstream bridges.

Some systems don't have such a device.  For example, if a host bridge
doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any
devices below it.  Or, as on the HiSilicon D05, the VGA device may be
behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the
legacy VGA resources will never reach the device.

This patch extends the arbiter so that if it doesn't find a device that
meets all the above criteria, it selects the first device that:

  - is of PCI_CLASS_DISPLAY_VGA and
  - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled

If it doesn't find even that, it selects the first device that:

  - is of class PCI_CLASS_DISPLAY_VGA.

Such a device may not be able to use the legacy VGA resources, but most
drivers can operate the device without those.  Setting it as the default
device means its "boot_vga" sysfs file will contain "1", which Xorg (via
libpciaccess) uses to help select its default output device.

This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in
particular; see the link below).

It also replaces the powerpc fixup_vga() quirk, albeit with slightly
different semantics: the quirk selected the first VGA device we found, and
overrode that selection with any enabled VGA device we found.  If there
were several enabled VGA devices, the *last* one we found would become the
default.

The code here instead selects the *first* enabled VGA device we find, and
if none are enabled, the first VGA device we find.

Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net
Tested-by: Daniel Axtens <dja@axtens.net> # arm64, ppc64-qemu-tcg
Tested-by: Zhou Wang <wangzhou1@hisilicon.com> # D05 Hisi Hip07, Hip08
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013034721.14630.65913.stgit@bhelgaas-glaptop.roam.corp.google.com

drm/bridge: adv7511: Fix a use after free

We free "edid", then use it again on the next line.

Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017204343.zctliubjkq7imudi@mwanda

drm/sun4i: Add support for A20 display pipeline components

The A20 display pipeline has 2 frontends, 2 backends, and 2 TCONs.
This patch adds support (or a compatible string in the frontend's
case) for these components.

The TCONs support directly outputting to CPU/RGB/LVDS LCD panels,
or it can output to HDMI via an on-chip HDMI controller, or
CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional
encoders are not covered in this patch.

Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: Expand commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-6-wens@csie.org

drm/sun4i: Add support for A10 display pipeline components

The A10 display pipeline has 2 frontends, 2 backends, and 2 TCONs.
This patch adds support (or a compatible string in the frontend's
case) for these components.

The TCONs support directly outputting to CPU/RGB/LVDS LCD panels,
or it can output to HDMI via an on-chip HDMI controller, or
CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional
encoders are not covered in this patch.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-5-wens@csie.org

drm/sun4i: hdmi: Support HDMI controller on A10

The HDMI controller in the A10 SoC is the same as the one currently
supported in the A10s. It has slightly different setup parameters.
Since these parameters are not thoroughly understood, we add support
for this variant by copying these parameters verbatim.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-4-wens@csie.org

drm/sun4i: tcon: Add support for A10 TCON

The A10 has two TCONs that are similar to the ones found on other SoCs.
Like the A31, TCON0 has a register used to mux the TCON outputs to the
downstream encoders. The bit fields are slightly different.

Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: Reworked for A10 and fixed up commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-3-wens@csie.org

drm/sun4i: backend: Support output muxing

The backend has a mux to select the destination of the data to output
to. It can select the TCON or the frontends. On the A20, it includes
an option to output to the second TCON. This is not documented in the
user manual, but the vendor kernel uses it nevertheless, so the second
backend outputs to the second TCON.

Although the muxing can be changed on the fly, DRM needs to be able to
group a bunch of layers such that they get switched to another crtc
together. This is because the display backend does the layer compositing,
while the TCON generates the display timings. This constraint is not
supported by DRM.

Here we simply pair up backends and TCONs with the same ID.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-2-wens@csie.org