cpufreq: Add more verbose description of interactive governor

Update the Kconfig help paragraph to give more detail about
interactive governor.

Change-Id: I607b817b370accac3a685001649a15e2f7894f59
Signed-off-by: Allen Martin <amartin@nvidia.com>

Documentation: remove trailing whitespace in governors.txt

Fixes a checkpatch warning

Change-Id: I2962b7c32f336188de0d2fe4f0f13f1199cb68e2
Signed-off-by: Allen Martin <amartin@nvidia.com>

cpufreq: interactive: add sysfs control for timer rate

Add a new sysfs control that tunes the rate of the timer used to
increase cpu frequency

Change-Id: I1aa13ae54bb43aff5b3688984d2955f56aae1658
Signed-off-by: Allen Martin <amartin@nvidia.com>

cpufreq: interactive: Add error checking on sysfs interfaces

This adds better error checking on tunable parameters on sysfs
interfaces.  Also fixes return value from these functions, previously
on success they would return 0 which would cause a infinite loop.

Change-Id: Ic05038492166f8673d007202092471f98a2f0dfa
Signed-off-by: Allen Martin <amartin@nvidia.com>

cpufreq: interactive: use idle notifier

Convert interactive governor to use idle notifier instead of
hooking pm_idle directly.

Change-Id: I47e007f330468ac559240a0ae8a3cb06a89ccb67
Signed-off-by: Allen Martin <amartin@nvidia.com>

cpufreq: interactive: remove debug trace code

Remove debug trace code in preparation of upstreaming

Change-Id: I0905885e75031f5e9d7cb06878fb68c1fd06d4fe
Signed-off-by: Allen Martin <amartin@nvidia.com>

ARM: Move leds idle start/stop calls to idle notifiers

Change-Id: I5d8e4e85b17bbab7992ecb477f0bdb5e4138b166
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>

ARM: Call idle notifiers

Change-Id: Id833e61c13baa1783705ac9e9046d1f0cc90c95e
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>

Move x86_64 idle notifiers to generic

Move the x86_64 idle notifiers originally by Andi Kleen and Venkatesh
Pallipadi to generic.

Change-Id: Idf29cda15be151f494ff245933c12462643388d5
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>

USB: gadget: f_mtp: Add support for sending MTP header during file transfer

MTP_SEND_FILE_WITH_HEADER ioctl allows sending a file with the 12 byte header
prepended at the beginning.
This is to allow MTP to use a single packet for the data phase instead of two.

Signed-off-by: Mike Lockwood <lockwood@android.com>

net: wireless: bcmdhd: Add PNO support through CFG80211 private command

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

net: wireless: bcmdhd: Fix build break with newer versions of gcc

In case the WPA cipher can't be determined the pval and gval variables don't
get updated which generates a warning in newer versions of gcc (tested with
4.5.2). Since the bcmdhd driver gets compiled with warnings treated as errors
this change is needed to fix the build.

Change-Id: Ia483777fee54ac526bb0db7c666fa2bf5df17354
Signed-off-by: Rom Lemarchand <rlemarchand@sta.samsung.com>

net: wireless: bcm4329: Fix roaming message processing

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

net: wireless: bcmdhd: Add country private command

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

net: wireless: bcm4329: Add packet filtering commands

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

cgroup: Add generic cgroup subsystem permission checks

Rather than using explicit euid == 0 checks when trying to move
tasks into a cgroup via CFS, move permission checks into each
specific cgroup subsystem. If a subsystem does not specify a
'allow_attach' handler, then we fall back to doing our checks
the old way.

Use the 'allow_attach' handler for the 'cpu' cgroup to allow
non-root processes to add arbitrary processes to a 'cpu' cgroup
if it has the CAP_SYS_NICE capability set.

This version of the patch adds a 'allow_attach' handler instead
of reusing the 'can_attach' handler.  If the 'can_attach' handler
is reused, a new cgroup that implements 'can_attach' but not
the permission checks could end up with no permission checks
at all.

Change-Id: Icfa950aa9321d1ceba362061d32dc7dfa2c64f0c
Original-Author: San Mehat <san@google.com>
Signed-off-by: Colin Cross <ccross@android.com>

Revert "cgroup: Add generic cgroup subsystem permission checks."

This reverts commit 1d38bc7d0523af2233b4280e2aeab34c6a076665.

Change-Id: I2c5066b696cbdd5ca117ed74718bcb7e70e878e7
Signed-off-by: Colin Cross <ccross@android.com>

netfitler: fixup the quota2, and enable.

The xt_quota2 came from
  http://sourceforge.net/projects/xtables-addons/develop

It needed tweaking for it to compile within the kernel tree.
Fixed kmalloc() and create_proc_entry() invocations within
 a non-interruptible context.
Removed useless copying of current quota back to the iptable's
struct matchinfo:
  - those are per CPU: they will change randomly based on which
    cpu gets to update the value.
  - they prevent matching a rule: e.g.
      -A chain -m quota2 --name q1 --quota 123
     can't be followed by
      -D chain -m quota2 --name q1 --quota 123
    as the 123 will be compared to the struct matchinfo's quota member.

Change-Id: I021d3b743db3b22158cc49acb5c94d905b501492
Signed-off-by: JP Abgrall <jpa@google.com>

netfilter: adding the original quota2 from xtables-addons

The original xt_quota in the kernel is plain broken:
  - counts quota at a per CPU level
    (was written back when ubiquitous SMP was just a dream)
  - provides no way to count across IPV4/IPV6.

This patch is the original unaltered code from:
  http://sourceforge.net/projects/xtables-addons

  at commit e84391ce665cef046967f796dd91026851d6bbf3

Change-Id: I19d49858840effee9ecf6cff03c23b45a97efdeb
Signed-off-by: JP Abgrall <jpa@google.com>

USB: otg: add otg id notifier utiltiies

Add a otg_id notifier to allow multiple drivers to cooperate to
determine the type of cable connected to a USB connector without
requiring direct calls between the drivers.

Change-Id: Ic5675f1a89daf85b17336765de24e4bdb6df6348
Signed-off-by: Colin Cross <ccross@android.com>

pda_power: add support for using otg transceiver events

If the platform data sets the use_otg_notifier flag,
the driver will now register an otg notifier callback and listen
to transceiver events for AC/USB plug-in events instead. This would
normally be used by not specifying is_xx_online callbacks and
not specifying any irqs so the state machine is completely driven
from OTG xceiver events.

Change-Id: Ic4b3bc4010f299156e41fd2411696c7ff5a88e92
Signed-off-by: Dima Zavin <dima@android.com>

Bluetooth: Add support for returning the encryption key size

This will be useful when userspace wants to restrict some kinds of
operations based on the length of the key size used to encrypt the
link.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for storing the key size

In some cases it will be useful having the key size used for
encrypting the link. For example, some profiles may restrict
some operations depending on the key length.

The key size is stored in the key that is passed to userspace
using the pin_length field in the key structure.

For now this field is only valid for LE controllers. 3.0+HS
controllers define the Read Encryption Key Size command, this
field is intended for storing the value returned by that
command.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for communicating keys with userspace

As the key format has changed to something that has a dynamic size,
the way that keys are received and sent must be changed.

The structure fields order is changed to make the parsing of the
information received from the Management Interface easier.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Remove unused field in hci_conn

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Use the stored LTK for restabilishing security

Now that it's possible that the exchanged key is present in
the link key list, we may be able to estabilish security with
an already existing key, without need to perform any SMP
procedure.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Use the link key list to temporarily store the STK

With this we can use only one place to store all keys, without
need to use a field in the connection structure for this
purpose.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for storing the LTK

Now when the LTK is received from the remote or generated it is stored,
so it can later be used.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix SM pairing parameters negotiation

Before implementing SM key distribution, the pairing features
exchange must be better negotiated, taking into account some
features of the host and connection requirements.

If we are in the "not pairable" state, it makes no sense to
exchange any key. This allows for simplification of the key
negociation method.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Reject an encryption request when the key isn't found

Now that we have methods to finding keys by its parameters we can
reject an encryption request if the key isn't found.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add functions to manipulate the link key list for SMP

As the LTK (the new type of key being handled now) has more data
associated with it, we need to store this extra data and retrieve
the keys based on that data.

Methods for searching for a key and for adding a new LTK are
introduced here.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add new structures for supporting SM key distribution

We need these changes because SMP keys may have more information
associated with them, for example, in the LTK case, it has an
encrypted diversifier (ediv) and a random number (rand).

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for SMP phase 3 (key distribution)

This adds support for generating and distributing all the keys
specified in the third phase of SMP.

This will make possible to re-establish secure connections, resolve
private addresses and sign commands.

For now, the values generated are random.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Remove L2CAP busy queue

The ERTM receive buffer is now handled in a way that does not require
the busy queue and the associated polling code.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Use event-driven approach for handling ERTM receive buffer

This change moves most L2CAP ERTM receive buffer handling out of the
L2CAP core and in to the socket code.  It's up to the higher layer
(the socket code, in this case) to tell the core when its buffer is
full or has space available.  The recv op should always accept
incoming ERTM data or else the connection will go down.

Within the socket layer, an skb that does not fit in the socket
receive buffer will be temporarily stored.  When the socket is read
from, that skb will be placed in the receive buffer if possible.  Once
adequate buffer space becomes available, the L2CAP core is informed
and the ERTM local busy state is cleared.

Receive buffer management for non-ERTM modes is unchanged.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Move code for ERTM local busy state to separate functions

The local busy state is entered and exited based on buffer status in
the socket layer (or other upper layer).  This change is in
preparation for general buffer status reports from the socket layer,
which will then be used to change the local busy status.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix potential deadlock in mgmt

All threads running in process context should disable local bottom
halve before locking hdev->lock.

This patch fix the following message generated when Bluetooh module
is loaded with enable_mgmt=y (CONFIG_PROVE_LOCKING enabled).

[  107.880781] =================================
[  107.881631] [ INFO: inconsistent lock state ]
[  107.881631] 2.6.39+ #1
[  107.881631] ---------------------------------
[  107.881631] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  107.881631] rcuc0/7 [HC0[0]:SC1[3]:HE1:SE0] takes:
[  107.881631]  (&(&hdev->lock)->rlock){+.?...}, at: [<ffffffffa0012c8d>] mgmt_set_local_name_complete+0x84/0x10b [bluetooth]
[  107.881631] {SOFTIRQ-ON-W} state was registered at:
[  107.881631]   [<ffffffff8105188b>] __lock_acquire+0x347/0xd52
[  107.881631]   [<ffffffff810526ac>] lock_acquire+0x8a/0xa7
[  107.881631]   [<ffffffff812b3758>] _raw_spin_lock+0x2c/0x3b
[  107.881631]   [<ffffffffa0011cc2>] mgmt_control+0xd4d/0x175b [bluetooth]
[  107.881631]   [<ffffffffa0013275>] hci_sock_sendmsg+0x97/0x293 [bluetooth]
[  107.881631]   [<ffffffff8121940c>] sock_aio_write+0x126/0x13a
[  107.881631]   [<ffffffff810a35fa>] do_sync_write+0xba/0xfa
[  107.881631]   [<ffffffff810a3beb>] vfs_write+0xaa/0xca
[  107.881631]   [<ffffffff810a3d80>] sys_write+0x45/0x69
[  107.881631]   [<ffffffff812b4892>] system_call_fastpath+0x16/0x1b
[  107.881631] irq event stamp: 2100876
[  107.881631] hardirqs last  enabled at (2100876): [<ffffffff812b40d4>] restore_args+0x0/0x30
[  107.881631] hardirqs last disabled at (2100875): [<ffffffff812b3f6a>] save_args+0x6a/0x70
[  107.881631] softirqs last  enabled at (2100862): [<ffffffff8106a805>] rcu_cpu_kthread+0x2b5/0x2e2
[  107.881631] softirqs last disabled at (2100863): [<ffffffff812b56bc>] call_softirq+0x1c/0x26
[  107.881631]
[  107.881631] other info that might help us debug this:
[  107.881631]  Possible unsafe locking scenario:
[  107.881631]
[  107.881631]        CPU0
[  107.881631]        ----
[  107.881631]   lock(&(&hdev->lock)->rlock);
[  107.881631]   <Interrupt>
[  107.881631]     lock(&(&hdev->lock)->rlock);
[  107.881631]
[  107.881631]  *** DEADLOCK ***
[  107.881631]
[  107.881631] 1 lock held by rcuc0/7:
[  107.881631]  #0:  (hci_task_lock){++.-..}, at: [<ffffffffa0008353>] hci_rx_task+0x49/0x2f3 [bluetooth]
[  107.881631]
[  107.881631] stack backtrace:
[  107.881631] Pid: 7, comm: rcuc0 Not tainted 2.6.39+ #1
[  107.881631] Call Trace:
[  107.881631]  <IRQ>  [<ffffffff812ae901>] print_usage_bug+0x1e7/0x1f8
[  107.881631]  [<ffffffff8100a796>] ? save_stack_trace+0x27/0x44
[  107.881631]  [<ffffffff8104fc3f>] ? print_irq_inversion_bug.part.26+0x19a/0x19a
[  107.881631]  [<ffffffff810504bb>] mark_lock+0x106/0x258
[  107.881631]  [<ffffffff81051817>] __lock_acquire+0x2d3/0xd52
[  107.881631]  [<ffffffff8102be73>] ? vprintk+0x3ab/0x3d7
[  107.881631]  [<ffffffff810526ac>] lock_acquire+0x8a/0xa7
[  107.881631]  [<ffffffffa0012c8d>] ? mgmt_set_local_name_complete+0x84/0x10b [bluetooth]
[  107.881631]  [<ffffffff81052615>] ? lock_release+0x16c/0x179
[  107.881631]  [<ffffffff812b3952>] _raw_spin_lock_bh+0x31/0x40
[  107.881631]  [<ffffffffa0012c8d>] ? mgmt_set_local_name_complete+0x84/0x10b [bluetooth]
[  107.881631]  [<ffffffffa0012c8d>] mgmt_set_local_name_complete+0x84/0x10b [bluetooth]
[  107.881631]  [<ffffffffa000d3fe>] hci_event_packet+0x122b/0x3e12 [bluetooth]
[  107.881631]  [<ffffffff81050658>] ? mark_held_locks+0x4b/0x6d
[  107.881631]  [<ffffffff812b3cff>] ? _raw_spin_unlock_irqrestore+0x40/0x4d
[  107.881631]  [<ffffffff810507b9>] ? trace_hardirqs_on_caller+0x13f/0x172
[  107.881631]  [<ffffffff812b3d07>] ? _raw_spin_unlock_irqrestore+0x48/0x4d
[  107.881631]  [<ffffffffa00083d2>] hci_rx_task+0xc8/0x2f3 [bluetooth]
[  107.881631]  [<ffffffff8102f836>] ? __local_bh_enable+0x90/0xa4
[  107.881631]  [<ffffffff8102f5a9>] tasklet_action+0x87/0xe6
[  107.881631]  [<ffffffff8102fa11>] __do_softirq+0x9f/0x13f
[  107.881631]  [<ffffffff812b56bc>] call_softirq+0x1c/0x26
[  107.881631]  <EOI>  [<ffffffff810033b8>] ? do_softirq+0x46/0x9a
[  107.881631]  [<ffffffff8106a805>] ? rcu_cpu_kthread+0x2b5/0x2e2
[  107.881631]  [<ffffffff8102f906>] _local_bh_enable_ip+0xac/0xc9
[  107.881631]  [<ffffffff8102f93b>] local_bh_enable+0xd/0xf
[  107.881631]  [<ffffffff8106a805>] rcu_cpu_kthread+0x2b5/0x2e2
[  107.881631]  [<ffffffff81041586>] ? __init_waitqueue_head+0x46/0x46
[  107.881631]  [<ffffffff8106a550>] ? rcu_yield.constprop.42+0x98/0x98
[  107.881631]  [<ffffffff81040f0a>] kthread+0x7f/0x87
[  107.881631]  [<ffffffff812b55c4>] kernel_thread_helper+0x4/0x10
[  107.881631]  [<ffffffff812b40d4>] ? retint_restore_args+0x13/0x13
[  107.881631]  [<ffffffff81040e8b>] ? __init_kthread_worker+0x53/0x53
[  107.881631]  [<ffffffff812b55c0>] ? gs_change+0x13/0x13

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix potential deadlock in hci_core

Since hdev->lock may be acquired by threads runnning in interrupt
context, all threads running in process context should disable
local bottom halve before locking hdev->lock. This can be done by
using hci_dev_lock_bh macro.

This way, we avoid potencial deadlocks like this one reported by
CONFIG_PROVE_LOCKING=y.

[  304.788780] =================================
[  304.789686] [ INFO: inconsistent lock state ]
[  304.789686] 2.6.39+ #1
[  304.789686] ---------------------------------
[  304.789686] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  304.789686] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE1:SE0] takes:
[  304.789686]  (&(&hdev->lock)->rlock){+.?...}, at: [<ffffffffa000bbfe>] hci_conn_check_pending+0x38/0x76 [bluetooth]
[  304.789686] {SOFTIRQ-ON-W} state was registered at:
[  304.789686]   [<ffffffff8105188b>] __lock_acquire+0x347/0xd52
[  304.789686]   [<ffffffff810526ac>] lock_acquire+0x8a/0xa7
[  304.789686]   [<ffffffff812b3758>] _raw_spin_lock+0x2c/0x3b
[  304.789686]   [<ffffffffa0009cf0>] hci_blacklist_del+0x1f/0x8a [bluetooth]
[  304.789686]   [<ffffffffa00139fd>] hci_sock_ioctl+0x2d9/0x314 [bluetooth]
[  304.789686]   [<ffffffff812197d8>] sock_ioctl+0x1f2/0x214
[  304.789686]   [<ffffffff810b0fd6>] do_vfs_ioctl+0x46c/0x4ad
[  304.789686]   [<ffffffff810b1059>] sys_ioctl+0x42/0x65
[  304.789686]   [<ffffffff812b4892>] system_call_fastpath+0x16/0x1b
[  304.789686] irq event stamp: 9768
[  304.789686] hardirqs last  enabled at (9768): [<ffffffff812b40d4>] restore_args+0x0/0x30
[  304.789686] hardirqs last disabled at (9767): [<ffffffff812b3f6a>] save_args+0x6a/0x70
[  304.789686] softirqs last  enabled at (9726): [<ffffffff8102fa9b>] __do_softirq+0x129/0x13f
[  304.789686] softirqs last disabled at (9739): [<ffffffff8102fb33>] run_ksoftirqd+0x82/0x133
[  304.789686]
[  304.789686] other info that might help us debug this:
[  304.789686]  Possible unsafe locking scenario:
[  304.789686]
[  304.789686]        CPU0
[  304.789686]        ----
[  304.789686]   lock(&(&hdev->lock)->rlock);
[  304.789686]   <Interrupt>
[  304.789686]     lock(&(&hdev->lock)->rlock);
[  304.789686]
[  304.789686]  *** DEADLOCK ***
[  304.789686]
[  304.789686] 1 lock held by ksoftirqd/0/3:
[  304.789686]  #0:  (hci_task_lock){++.-..}, at: [<ffffffffa0008353>] hci_rx_task+0x49/0x2f3 [bluetooth]
[  304.789686]
[  304.789686] stack backtrace:
[  304.789686] Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.39+ #1
[  304.789686] Call Trace:
[  304.789686]  [<ffffffff812ae901>] print_usage_bug+0x1e7/0x1f8
[  304.789686]  [<ffffffff8100a796>] ? save_stack_trace+0x27/0x44
[  304.789686]  [<ffffffff8104fc3f>] ? print_irq_inversion_bug.part.26+0x19a/0x19a
[  304.789686]  [<ffffffff810504bb>] mark_lock+0x106/0x258
[  304.789686]  [<ffffffff812b40d4>] ? retint_restore_args+0x13/0x13
[  304.789686]  [<ffffffff81051817>] __lock_acquire+0x2d3/0xd52
[  304.789686]  [<ffffffff8102be73>] ? vprintk+0x3ab/0x3d7
[  304.789686]  [<ffffffff812ae126>] ? printk+0x3c/0x3e
[  304.789686]  [<ffffffff810526ac>] lock_acquire+0x8a/0xa7
[  304.789686]  [<ffffffffa000bbfe>] ? hci_conn_check_pending+0x38/0x76 [bluetooth]
[  304.789686]  [<ffffffff811601c6>] ? __dynamic_pr_debug+0x10c/0x11a
[  304.789686]  [<ffffffff812b3758>] _raw_spin_lock+0x2c/0x3b
[  304.789686]  [<ffffffffa000bbfe>] ? hci_conn_check_pending+0x38/0x76 [bluetooth]
[  304.789686]  [<ffffffffa000bbfe>] hci_conn_check_pending+0x38/0x76 [bluetooth]
[  304.789686]  [<ffffffffa000c561>] hci_event_packet+0x38e/0x3e12 [bluetooth]
[  304.789686]  [<ffffffff81052615>] ? lock_release+0x16c/0x179
[  304.789686]  [<ffffffff812b3b41>] ? _raw_read_unlock+0x23/0x27
[  304.789686]  [<ffffffffa0013e7f>] ? hci_send_to_sock+0x179/0x188 [bluetooth]
[  304.789686]  [<ffffffffa00083d2>] hci_rx_task+0xc8/0x2f3 [bluetooth]
[  304.789686]  [<ffffffff8102f5a9>] tasklet_action+0x87/0xe6
[  304.789686]  [<ffffffff8102fa11>] __do_softirq+0x9f/0x13f
[  304.789686]  [<ffffffff8102fb33>] run_ksoftirqd+0x82/0x133
[  304.789686]  [<ffffffff8102fab1>] ? __do_softirq+0x13f/0x13f
[  304.789686]  [<ffffffff81040f0a>] kthread+0x7f/0x87
[  304.789686]  [<ffffffff812b55c4>] kernel_thread_helper+0x4/0x10
[  304.789686]  [<ffffffff812b40d4>] ? retint_restore_args+0x13/0x13
[  304.789686]  [<ffffffff81040e8b>] ? __init_kthread_worker+0x53/0x53
[  304.789686]  [<ffffffff812b55c0>] ? gs_change+0x13/0x13

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Remove enable_smp parameter

The enable_smp parameter is no longer needed. It can be replaced by
checking lmp_host_le_capable.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add lmp_host_le_capable() macro

Since we have the extended LMP features properly implemented, we
should check the LMP_HOST_LE bit to know if the host supports LE.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add enable_le module parameter

This patch adds a new module parameter to enable/disable host LE
support. By default host LE support is disabled.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Write LE Host Supported command

This patch adds a handler to Write LE Host Supported command complete
events. Once this commands has completed successfully, we should
read the extended LMP features and update the extfeatures field in
hci_dev.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add extfeatures to struct hci_dev

This new field holds the extended LMP features value. Some LE
mechanism such as discovery procedure needs to read the extended
LMP features to work properly.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Check earlier for L2CAP ERTM frames to drop

Even when the received tx_seq is expected, the frame still needs to be
dropped if the TX window is exceeded or the receiver is in the local
busy state.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Clean up unused struct hci_conn items

priv and lock are never used

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix bad locking balance

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add Atheros AR3012 one PID/VID supported

The new Ath3k needs to download patch and radio table,
and it keeps same PID/VID even after downloading the patch and radio
table. This patch is to use the bcdDevice (Device Release Number) to
judge whether the chip has been patched or not. The init bcdDevice
value of the chip is 0x0001, this value increases after patch and
radio table downloading.

Signed-off-by: Steven.Li <yongli@qca.qualcomm.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add bt_printk

Add a local logging function to emit bluetooth specific
messages.  Using vsprintf extension %pV saves code/text
space.

Convert the current BT_INFO and BT_ERR macros to use bt_printk.
Remove __func__ from BT_ERR macro (and the uses).
Prefix "Bluetooth: " to BT_ERR
Remove __func__ from BT_DBG as function can be prefixed when
using dynamic_debug.

With allyesconfig:

   text    data     bss     dec     hex filename
 129956    8632   36096  174684   2aa5c drivers/bluetooth/built-in.o.new2
 134402    8632   36064  179098   2bb9a drivers/bluetooth/built-in.o.old
  14778    1012    3408   19198    4afe net/bluetooth/bnep/built-in.o.new2
  15067    1012    3408   19487    4c1f net/bluetooth/bnep/built-in.o.old
 346595   19163   86080  451838   6e4fe net/bluetooth/built-in.o.new2
 353751   19163   86064  458978   700e2 net/bluetooth/built-in.o.old
  18483    1172    4264   23919    5d6f net/bluetooth/cmtp/built-in.o.new2
  18927    1172    4264   24363    5f2b net/bluetooth/cmtp/built-in.o.old
  19237    1172    5152   25561    63d9 net/bluetooth/hidp/built-in.o.new2
  19581    1172    5152   25905    6531 net/bluetooth/hidp/built-in.o.old
  59461    3884   14464   77809   12ff1 net/bluetooth/rfcomm/built-in.o.new2
  61206    3884   14464   79554   136c2 net/bluetooth/rfcomm/built-in.o.old

with x86 defconfig (and just bluetooth):

$ size net/bluetooth/built-in.o.defconfig.*
   text    data     bss     dec     hex filename
  66358     933     100   67391   1073f net/bluetooth/built-in.o.defconfig.new
  66643     933     100   67676   1085c net/bluetooth/built-in.o.defconfig.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Rename function bt_err to bt_to_errno

Make it easier to use more normal logging styles later.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: ERTM timeouts need to be converted to jiffies

ERTM timeouts are defined in milliseconds, but need to be converted
to jiffies when passed to mod_timer().

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix indentation whitespace

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: uses crypto interfaces, select CRYPTO

Recent changes to hci_core.c use crypto interfaces, so select CRYPTO
to make sure that those interfaces are present.

Fixes these build errors when CRYPTO is not enabled:

net/built-in.o: In function `hci_register_dev':
(.text+0x4cf86): undefined reference to `crypto_alloc_base'
net/built-in.o: In function `hci_unregister_dev':
(.text+0x4f912): undefined reference to `crypto_destroy_tfm'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: include scatterlist.h where needed

net/bluetooth/smp.c: In function 'smp_e':
net/bluetooth/smp.c:49:21: error: storage size of 'sg' isn't known
net/bluetooth/smp.c:67:2: error: implicit declaration of function 'sg_init_one'
net/bluetooth/smp.c:49:21: warning: unused variable 'sg'

Caused by commit d22ef0bc83c5 ("Bluetooth: Add LE SMP Cryptoolbox
functions").  Missing include file, presumably.  This batch has been in
the bluetooth tree since June 14, so it may have been exposed by the
removal of linux/mm.h from netdevice.h ...

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Bluetooth: Fix not setting the chan state

When the connection is ready we should set the connection
to CONNECTED so userspace can use it.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Remove useless access to the socket

We already have access to the chan, we don't have to access the
socket to get its imtu.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix crash when setting a LE socket to ready

We should not try to do any other type of configuration for
LE links when they become ready.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix locking in blacklist code

There was no unlock call on the errors path

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Use bit operations on conn_state

Instead of setting bits manually we use set_bit, test_bit, etc.
Also remove L2CAP_ prefix from macros.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: use bit operation on conf_state

Instead of making the bit operations manually, we now use set_bit,
test_bit, etc.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add blacklisting support for mgmt interface

Management interface commands for blocking and unblocking devices.

Signed-off-by: Antti Julku <antti.julku@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Move blacklisting functions to hci_core

Move blacklisting functions to hci_core.c, so that they can
be used by both management interface and hci socket interface.

Signed-off-by: Antti Julku <antti.julku@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add key size checks for SMP

This patch implements a check in smp cmd pairing request and pairing
response to verify if encryption key maximum size is compatible in both
slave and master when SMP Pairing is requested. Keys are also masked to
the correct negotiated size.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for SMP timeout

This patch adds support for disconnecting the link when SMP procedure
takes more than 30 seconds.

SMP begins when either the Pairing Request command is sent or the
Pairing Response is received, and it ends when the link is encrypted
(or terminated). Vol 3, Part H Section 3.4.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: fix missing parameter for HCI_OP_DISCONNECT

The "dc" variable is initialized but not passed to hci_send_cmd().

Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org>
Signed-off-by: Bruna Moreira <bruna.moreira@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for Pairing features exchange

This patch implements a simple version of the SMP Pairing Features
exchange procedure (Vol. 3 Part H, Section 2.3.5.1).

For now, everything that would cause a Pairing Method different of
Just Works to be chosen is rejected.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for building pairing commands

Before we are able to do a proper exchange of pairing parameters,
we need a unified way of building pairing requests and responses.

For IO Capability we use the value that was set by userspace,
using the management interface.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Update the security level when link is encrypted

If the pending security level is greater than the current security
level and the link is now encrypted, we should update the link
security level.

This is only useful for LE links, when the only event generated
when SMP is sucessful in the Encrypt Change event.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix initial security level of LE links

As the default security level (BT_SECURITY_SDP) doesn't make sense for
LE links, initialize LE links with something that makes sense.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for resuming socket when SMP is finished

This adds support for resuming the user space traffic when SMP
negotiation is complete.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Remove debug statements

Now that these commands are sent to the controller we can use hcidump
to verify that the correct values are produced.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for LE Start Encryption

This adds support for starting SMP Phase 2 Encryption, when the initial
SMP negotiation is successful. This adds the LE Start Encryption and LE
Long Term Key Request commands and related events.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add SMP confirmation checks methods

This patch includes support for generating and sending the random value
used to produce the confirmation value.

Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add SMP confirmation structs

This patch adds initial support for verifying the confirmation value
that the remote side has sent.

Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add LE SMP Cryptoolbox functions

This patch implements SMP crypto functions called ah, c1, s1 and e.
It also implements auxiliary functions. All These functions are needed
for SMP keys generation.

Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org>
Signed-off-by: Bruna Moreira <bruna.moreira@openbossa.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add support for using the crypto subsystem

This will allow using the crypto subsystem for encrypting data. As SMP
(Security Manager Protocol) is implemented almost entirely on the host
side and the crypto module already implements the needed methods
(AES-128), it makes sense to use it.

There's now a new module option to enable/disable SMP support.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add simple SMP pairing negotiation

This implementation only exchanges SMP messages between the Host and the
Remote. No keys are being generated. TK and STK generation will be
provided in further patches.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Start SMP procedure

Start SMP procedure for LE connections. This modification intercepts
l2cap received frames and call proper SMP functions to start the SMP
procedure. By now, no keys are being used.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Implement the first SMP commands

These simple commands will allow the SMP procedure to be started
and terminated with a not supported error. This is the first step
toward something useful.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Don't forget to check for LE_LINK

Otherwise the wrong error can be returned.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: keep reference if any ERTM timer is enabled

ERTM use the generic L2CAP timer functions to keep a reference to the
channel. This is useful for avoiding crashes.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Make timer functions generic

We now plan to use l2cap_set_timer and l2cap_clear_timer in ERTM timers.

Change-Id: Ie62b01e003f8885ae89c73e2e64195c21cbadddd
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add refcnt to struct l2cap_chan

struct l2cap_chan has now its own refcnt that is compatible with the
socket refcnt, i.e., we won't see sk_refcnt = 0 and chan->refcnt > 0.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add state tracking to struct l2cap_chan

Now socket state is tracked by struct sock and channel state is tracked by
chan->state. At this point both says the same, but this is going to change
when we add AMP Support for example.

Change-Id: Idbf873f5e8dd94f5b2482ba960c52193d28ce5dd
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: add close() callback to l2cap_chan_ops

close() calls l2cap_sock_kill() on l2cap_sock.c

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: add recv() callback to l2cap_chan_ops

This abstracts the call to sock_queue_recv_skb() into
l2cap_chan_ops->recv().

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add l2cap_chan_ops abstraction

Add an abstraction layer between L2CAP core and its users (only
l2cap_sock.c now). The first function implemented is new_connection() that
replaces calls to l2cap_sock_alloc() in l2cap_core.c

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Merge l2cap_chan_create() in the l2cap_sock_alloc()

As a first step to remove l2cap_sock_alloc() and l2cap_sock_init() from
l2cap_core.c

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Clean up some code style issues

Fix lines longer than 80 chars in length.

Change-Id: I448077965c5f7723a4a9537977bfa664cfe104fd
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Kill set but unused variable 'cmd' in cmtp_recv_capimsg()

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning

Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following
warning:

In function 'copy_from_user',
    inlined from 'rfcomm_sock_setsockopt' at
    net/bluetooth/rfcomm/sock.c:705:
arch/x86/include/asm/uaccess_64.h:65:
warning: call to 'copy_from_user_overflow' declared with
attribute warning: copy_from_user() buffer size is not provably
correct

presumably due to buf_size being signed causing GCC to fail to
see that buf_size can't become negative.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Fix check for the ERTM local busy state

Local busy is encoded in a bitfield, but was not masked out correctly.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Restore accidentally-deleted line

When code was moved from l2cap_core.c to l2cap_sock.c in commit
6de0702b5b93da0ef097aa092b4597fbc024ebba, one line was dropped
from the old __l2cap_sock_close() implementation. This sk_state
change should still be in l2cap_chan_close().

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Simplify hci_conn_accept_secure check

If the link key is secure (authenticated or combination 16 digit)
the sec_level will be always BT_SECURITY_HIGH. Therefore, instead
of checking the link key type simply check the sec_level on the link.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Add BT_POWER L2CAP socket option.

Add BT_POWER socket option used to control the power
characteristics of the underlying ACL link. When the remote end
has put the link in sniff mode and the host stack wants to send
data we need need to explicitly exit sniff mode to work well with
certain devices (For example, A2DP on Plantronics Voyager 855).
However, this causes problems with HID devices.

Hence, moving into active mode when sending data, irrespective
of who set the sniff mode has been made as a socket option. By
default, we will move into active mode. HID devices can set the
L2CAP socket option to prevent this from happening.

Currently, this has been implemented for L2CAP sockets. This has been
tested with incoming and outgoing L2CAP sockets for HID and A2DP.

Based on discussions on linux-bluetooth and patches submitted by
Andrei Emeltchenko.

Signed-off-by: Jaikumar Ganesh <jaikumar@google.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Verify a pin code in pin_code_reply

As we cannot relay on a userspace mgmt api implementation we should verify
if pin_code_reply in fact contains the secure pin code.

If userspace replied with unsecure pincode when secure was required we will
send pin_code_neg_reply to the controller.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Remove a magic number

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: fix sparse & gcc warnings

sparse complains about a few things that should
be static.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Set 'peer_addr_type' in hci_le_connect()

Set the 'peer_addr_type' field of the LE Create Connection command
sent in hci_le_connect().

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Check advertising cache in hci_connect()

When connecting to a LE device, we need to check the advertising
cache in order to know the address type of that device.

If its advertising entry is not found, the connection is not
established and hci_connect() returns error.

Change-Id: I234912abc53b859becbe79625b08bc3b6eacc143
Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

Bluetooth: Remove useless check in hci_connect()

There is no need to check the connection's state since hci_conn_add()
has just created a new connection and its state has been set properly.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Acked-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>