scsi: mpi3mr: Add event handling debug prints

Link: https://lore.kernel.org/r/20210520152545.2710479-25-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add EEDP DIF DIX support

Link: https://lore.kernel.org/r/20210520152545.2710479-24-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for DSN secure firmware check

Read PCI_EXT_CAP_ID_DSN to query security status.

The driver will throw a warning message when a non-secure type controller
is detected. The purpose of this interface is to avoid interacting with any
firmware which is not secured/signed by Broadcom.  Any tampering on
firmware component will be detected by hardware and it will be communicated
to the driver to avoid any further interaction with that component.

Link: https://lore.kernel.org/r/20210520152545.2710479-23-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for PM suspend and resume

Link: https://lore.kernel.org/r/20210520152545.2710479-22-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Wait for pending I/O completions upon detection of VD I/O timeout

Wait for host I/O completion (default 180 seconds) if I/O timeout is
detected on VDs.

Link: https://lore.kernel.org/r/20210520152545.2710479-21-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Print pending host I/Os for debugging

Link: https://lore.kernel.org/r/20210520152545.2710479-20-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Complete support for soft reset

Unlock the host diagnostic register, write the specific reset type to that
and wait for reset acknowledgment from the controller. If the reset is not
successful retry for the predefined number of times

Link: https://lore.kernel.org/r/20210520152545.2710479-19-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for threaded ISR

Register driver for threaded interrupts.

By default the driver will attempt I/O completion from interrupt context
(primary handler). Since the driver tracks per reply queue outstanding
I/Os, it will schedule threaded ISR if there are any outstanding I/Os
expected on that particular reply queue.

Threaded ISR (secondary handler) will loop for I/O completion as long as
there are outstanding I/Os (speculative method using same per reply queue
outstanding counter) or it has completed some X amount of commands
(something like budget).

Link: https://lore.kernel.org/r/20210520152545.2710479-18-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Hardware workaround for UNMAP commands to NVMe drives

The controller hardware can not handle certain UNMAP commands for NVMe
drives. Add support in the driver for checking those commands and handle
them appropriately.

Link: https://lore.kernel.org/r/20210520152545.2710479-17-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Allow certain commands during pci-remove hook

Instead of driver returning DID_NO_CONNECT during driver unload allow SSU
and Sync Cache commands to be sent to the controller to flush any cached
data from the drive.

Link: https://lore.kernel.org/r/20210520152545.2710479-16-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add change queue depth support

Link: https://lore.kernel.org/r/20210520152545.2710479-15-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Implement SCSI error handler hooks

Link: https://lore.kernel.org/r/20210520152545.2710479-14-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: hare@suse.de
Cc: thenzl@redhat.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add bios_param SCSI host template hook

Link: https://lore.kernel.org/r/20210520152545.2710479-13-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Print IOC info for debugging

Link: https://lore.kernel.org/r/20210520152545.2710479-12-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for timestamp sync with firmware

This operation requests that the IOC update the TimeStamp.

When the I/O Unit is powered on it sets the TimeStamp field value to
0x0000_0000_0000_0000 and increments the current value every millisecond.
A host driver sets the TimeStamp field to the current time by using an
IOCInit request. The TimeStamp field is periodically updated by the host
driver.

Link: https://lore.kernel.org/r/20210520152545.2710479-11-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for recovering controller

Detection of firmware fault or any kind of unresponsiveness in the
controller (any admin command which times out) results in resetting the
controller. The primary reset mechanisms used are either soft reset or diag
fault reset. A reset is performed if the host sets the ResetAction field in
the HostDiagnostic register to either 001b (soft reset) or 007b (diag fault
reset). After successfully resetting the controller the driver
reinitializes the controller by going through start of the day
initialization procedure. Pending I/Os during the reset are returned back
to the SCSI midlayer for retry.

Link: https://lore.kernel.org/r/20210520152545.2710479-10-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.co
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Additional event handling

Implement support for handling the following MPI events:

 - MPI3_EVENT_SAS_BROADCAST_PRIMITIVE
 - MPI3_EVENT_CABLE_MGMT
 - MPI3_EVENT_ENERGY_PACK_CHANGE

Link: https://lore.kernel.org/r/20210520152545.2710479-9-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for PCIe device event handling

Implement support for the following PCIe-related MPI events:

 - MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST
 - MPI3_EVENT_PCIE_ENUMERATION

Link: https://lore.kernel.org/r/20210520152545.2710479-8-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for device add/remove event handling

Firmware can report various MPI Events. Enable support for processing the
following events related to device addition/removal to the driver:

 - MPI3_EVENT_DEVICE_ADDED
 - MPI3_EVENT_DEVICE_INFO_CHANGED
 - MPI3_EVENT_DEVICE_STATUS_CHANGE
 - MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE
 - MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST
 - MPI3_EVENT_SAS_DISCOVERY
 - MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR

Link: https://lore.kernel.org/r/20210520152545.2710479-7-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for internal watchdog thread

The watchdog thread is the driver's internal thread which does a few things
such as detecting firmware faults, resetting the controller, performing
timestamp sync, etc.

Link: https://lore.kernel.org/r/20210520152545.2710479-6-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add support for queue command processing

Send Port Enable Request to FW for Device Discovery.  As part of port
enable completion driver calls scan_start and scan_finished hooks.  SCSI
layer references like sdev, starget, etc. are added but actual device
discovery will be supported once driver adds complete event process
handling.

Link: https://lore.kernel.org/r/20210520152545.2710479-5-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: hare@suse.de
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Create operational request and reply queue pair

Create operational request and reply queue pair.

The MPI3 transport interface consists of an Administrative Request Queue,
an Administrative Reply Queue, and Operational Messaging Queues.  The
Operational Messaging Queues are the primary communication mechanism
between the host and the I/O Controller (IOC).  Request messages, allocated
in host memory, identify I/O operations to be performed by the IOC. These
operations are queued on an Operational Request Queue by the host driver.
Reply descriptors track I/O operations as they complete.  The IOC queues
these completions in an Operational Reply Queue.

To fulfil large contiguous memory requirement, driver creates multiple
segments and provide the list of segments. Each segment size should be 4K
which is a hardware requirement. An element array is contiguous or
segmented.  A contiguous element array is located in contiguous physical
memory.  A contiguous element array must be aligned on an element size
boundary.  An element's physical address within the array may be directly
calculated from the base address, the Producer/Consumer index, and the
element size.

Expected phased identifier bit is used to find out valid entry on reply
queue. Driver sets <ephase> bit and IOC inverts the value of this bit on
each pass.

Link: https://lore.kernel.org/r/20210520152545.2710479-4-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Base driver code

Implement basic pci device driver requirements: Device probing, memory
allocation, mapping system registers, allocate irq lines, etc.

Source is managed in mainly three different files:

 - mpi3mr_fw.c:  Common code which interacts with underlying fw/hw.

 - mpi3mr_os.c:  Common code which interacts with SCSI midlayer.

 - mpi3mr_app.c: Common code which interacts with application/ioctl.
 This is currently work in progress.

Link: https://lore.kernel.org/r/20210520152545.2710479-3-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Add mpi30 Rev-R headers and Kconfig

This adds the Kconfig and mpi30 headers.

Link: https://lore.kernel.org/r/20210520152545.2710479-2-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: bvanassche@acm.org
Cc: hch@infradead.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Fix a kernel-doc related formatting issue

Fix the following W=1 kernel build warning:

drivers/scsi/ufs/ufshcd.c:9773: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

[mkp: upcase abbreviations]

Link: https://lore.kernel.org/r/20210531163122.451375-1-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: isci: Use correctly sized target buffer for memcpy()

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), avoid intentionally writing across
neighboring array fields.

Switch from rsp_ui to resp_buf, since resp_ui isn't SSP_RESP_IU_MAX_SIZE
bytes in length. This avoids future compile-time warnings.

Link: https://lore.kernel.org/r/20210528181337.792268-4-keescook@chromium.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: esas2r: Switch to flexible array member

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), avoid intentionally writing across
neighboring array fields.

Remove old-style 1-byte array in favor of a flexible array[1] to avoid
future false-positive cross-field memcpy() warning in:

esas2r_vda.c:
memcpy(vi->cmd.gsv.version_info, esas2r_vdaioctl_versions, ...)

The change in struct size doesn't change other structure sizes (it is
already maxed out to 256 bytes, for example here:

        union {
                struct atto_ioctl_vda_scsi_cmd scsi;
                struct atto_ioctl_vda_flash_cmd flash;
                struct atto_ioctl_vda_diag_cmd diag;
                struct atto_ioctl_vda_cli_cmd cli;
                struct atto_ioctl_vda_smp_cmd smp;
                struct atto_ioctl_vda_cfg_cmd cfg;
                struct atto_ioctl_vda_mgt_cmd mgt;
                struct atto_ioctl_vda_gsv_cmd gsv;
                u8 cmd_info[256];
        } cmd;

No sizes are calculated using the enclosing structure, so no other
updates are needed.

Link: https://lore.kernel.org/r/20210528181337.792268-3-keescook@chromium.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: FlashPoint: Rename si_flags field

The BusLogic driver has build errors on ia64 due to a name collision (in
the #included FlashPoint.c file). Rename the struct field in struct
sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build.

This is the first problem. There are 50+ others after this one:

In file included from ../include/uapi/linux/signal.h:6,
                 from ../include/linux/signal_types.h:10,
                 from ../include/linux/sched.h:29,
                 from ../include/linux/hardirq.h:9,
                 from ../include/linux/interrupt.h:11,
                 from ../drivers/scsi/BusLogic.c:27:
../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
   15 | #define si_flags _sifields._sigfault._flags
      |                           ^
../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags'
   43 |  u16 si_flags;
      |      ^~~~~~~~
In file included from ../drivers/scsi/BusLogic.c:51:
../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter':
../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields'
 1076 |  pCardInfo->si_flags = 0x0000;
      |           ^~
../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields'

Link: https://lore.kernel.org/r/20210529234857.6870-1-rdunlap@infradead.org
Fixes: 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit.")
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix fall-through warnings for Clang

In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding break statements instead of just letting
the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210528200828.GA39349@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Log PCI address in qla_nvme_unregister_remote_port()

Pass in fcport->vha to ql_log() in order to add the PCI address to the log.

Currently NULL is passed in which gives this confusing log entry:

> qla2xxx [0000:00:00.0]-2112: : qla_nvme_unregister_remote_port: unregister remoteport on 0000000009d6a2e9 50000973981648c7

Link: https://lore.kernel.org/r/20210531122444.116655-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-mediatek: Disable HCI before HW reset

MediaTek ufshci needs to be disabled before HW reset to avoid potential
issues.

Link: https://lore.kernel.org/r/20210528033624.12170-3-alice.chao@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Alice.Chao <alice.chao@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Export ufshcd_hba_stop()

Export ufshcd_hba_stop() to allow vendors to disable HCI in variant ops.

Link: https://lore.kernel.org/r/20210528033624.12170-2-alice.chao@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Alice.Chao <alice.chao@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Suppress false positive unhandled interrupt messages

From ufshcd_transfer_req_compl():

    Resetting interrupt aggregation counters first and reading the
    DOOR_BELL afterward allows us to handle all the completed requests.  In
    order to prevent other interrupts starvation the DB is read once after
    reset. The down side of this solution is the possibility of false
    interrupt if device completes another request after resetting
    aggregation and before reading the DB.

Prevent that ufshcd_intr() reports a false positive "Unhandled interrupt"
message if the above scenario is triggered.

Link: https://lore.kernel.org/r/20210519202058.12634-2-bvanassche@acm.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Handle firmware faults during second half of IOC init

If a firmware fault occurs while scanning the devices during IOC
initialization then the driver issues the hard reset operation to recover
the IOC. However, the driver is not issuing a Port enable request
message as part of hard reset operation during IOC initialization.  Due to
this, the driver will not receive get any device discovery-related events
and hence devices will not be accessible.

Teach the driver to gracefully handle firmware faults while scanning for
target devices during IOC initialization. Make the driver issue a port
enable request message as part of hard reset operation. This permits
receiving device discovery-related events from the firmware after the hard
reset operation completes.

Link: https://lore.kernel.org/r/20210518051625.1596742-4-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Handle firmware faults during first half of IOC init

During first half of IOC initialization (i.e.  before going for device
scanning), if any firmware fault occurs then driver is aborting the IOC
initialization operation.

Modify the driver to issue a diag reset operation to recover IOC from fault
state and reinitialize the IOC.

Link: https://lore.kernel.org/r/20210518051625.1596742-3-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpt3sas: Fix deadlock while cancelling the running firmware event

Do not cancel current running firmware event work if the event type is
different from MPT3SAS_REMOVE_UNRESPONDING_DEVICES.  Otherwise a deadlock
can be observed while cancelling the current firmware event work if a hard
reset operation is called as part of processing the current event.

Link: https://lore.kernel.org/r/20210518051625.1596742-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Cap scsi_host cmd_per_lun at can_queue

The sysfs handling function sdev_store_queue_depth() enforces that the sdev
queue depth cannot exceed shost can_queue. The initial sdev queue depth
comes from shost cmd_per_lun. However, the LLDD may manually set
cmd_per_lun to be larger than can_queue, which leads to an initial sdev
queue depth greater than can_queue.

Such an issue was reported in [0], which caused a hang. That has since been
fixed in commit fc09acb7de31 ("scsi: scsi_debug: Fix cmd_per_lun, set to
max_queue").

Stop this possibly happening for other drivers by capping shost cmd_per_lun
at shost can_queue.

[0] https://lore.kernel.org/linux-scsi/YHaez6iN2HHYxYOh@T590/

Link: https://lore.kernel.org/r/1621434662-173079-1-git-send-email-john.garry@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Update lpfc version to 12.8.0.10

Update lpfc version to 12.8.0.10

Link: https://lore.kernel.org/r/20210514195559.119853-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Reregister FPIN types if ELS_RDF is received from fabric controller

FC-LS-5 specifies that a received RDF implies a possible change to fabric
supported diagnostic functions. Endpoints are to re-perform the RDF
exchange with the fabric to enable possible new features or adapt to
changes in values.

This patch adds the logic to RDF receive to re-perform the RDF exchange
with the switch.

Link: https://lore.kernel.org/r/20210514195559.119853-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add a option to enable interlocked ABTS before job completion

Default behavior for the driver, when aborting an I/O, is to terminate the
I/O with the adapter. The adapter will initiate an ABTS to terminate the
exchange on the link and mark the exchange is terminated so that no further
use of the sgl or any traffic for the exchange is worked on. Completion on
the Abort is then posted to the driver, which as the I/O is terminated can
complete the I/O to the OS. This completion may occur prior to the ABTS
handshake completing on the wire. The ABTS handshake can take a long time
to complete with timeouts and retries reaching 60+ seconds. Note: if
retries fail, LOGO occurs.

Some devices want to ensure that the ABTS handshake fully completes (this
device has fully ack'd it) before the I/O completion is posted back to the
OS, where a failed I/O may be retried via a different path.

To support this behavior, an option was added to the driver to change I/O
completion from the Abort cmd completion to the Exchange termination (aka
ABTS) completion.

Link: https://lore.kernel.org/r/20210514195559.119853-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix crash when lpfc_sli4_hba_setup() fails to initialize the SGLs

The driver is encountering a crash in lpfc_free_iocb_list() while
performing initial attachment.

Code review found this to be an errant failure path that was taken, jumping
to a tag that then referenced structures that were uninitialized.

Fix the failure path.

Link: https://lore.kernel.org/r/20210514195559.119853-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Ignore GID-FT response that may be received after a link flip

When a link bounce happens, there is a possibility that responses to
requests posted prior to the link bounce could be received. This is
problematic as the counter to track reglogin completion after link up can
become out of sync with the real state.

As there is no reason to process a request made in a prior link up context,
eliminate all the disturbance by tagging the request with the event_tag
maintained by the SLI Port for the link. The event_tag will change on every
link state transition.  As long as the tag matches the current event_tag,
the response can be processed. If it doesn't match, just discard the
response.

Link: https://lore.kernel.org/r/20210514195559.119853-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix node handling for Fabric Controller and Domain Controller

During link bounce testing, RPI counts were seen to differ from the number
of nodes. For fabric and domain controllers, a temporary RPI is assigned,
but the code isn't registering it. If the nodes do go away, such as on link
down, the temporary RPI isn't being released.

Change the way these two fabric services are managed, make them behave like
any other remote port. Register the RPI and register with the transport.
Never leave the nodes in a NPR or UNUSED state where their RPI is in limbo.
This allows them to follow normal dev_loss_tmo handling, RPI refcounting,
and normal removal rules. It also allows fabric I/Os to use the RPI for
traffic requests.

Note: There is some logic that still has a couple of exceptions when the
Domain controller (0xfffcXX). There are cases where the fabric won't have a
valid login but will send RDP. Other times, it will it send a LOGO then an
RDP. It makes for ad-hoc behavior to manage the node. Exceptions are
documented in the code.

Link: https://lore.kernel.org/r/20210514195559.119853-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix Node recovery when driver is handling simultaneous PLOGIs

When lpfc is handling a solicited and unsolicited PLOGI with another
initiator, the remote initiator is never recovered. The node for the
initiator is erroneouosly removed and all resources released.

In lpfc_cmpl_els_plogi(), when lpfc_els_retry() returns a failure code, the
driver is calling the state machine with a device remove event because the
remote port is not currently registered with the SCSI or NVMe
transports. The issue is that on a PLOGI "collision" the driver correctly
aborts the solicited PLOGI and allows the unsolicited PLOGI to complete the
process, but this process is interrupted with a device_rm event.

Introduce logic in the PLOGI completion to capture the PLOGI collision
event and jump out of the routine.  This will avoid removal of the node.
If there is no collision, the normal node removal will occur.

Fixes:  52edb2caf675 ("scsi: lpfc: Remove ndlp when a PLOGI/ADISC/PRLI/REG_RPI ultimately fails")
Cc: <stable@vger.kernel.org> # v5.11+
Link: https://lore.kernel.org/r/20210514195559.119853-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Add ndlp kref accounting for resume RPI path

The driver is crashing due to a bad pointer during driver load due in an
adisc acc receive routine. The driver is missing node get/put in the
mbx_resume_rpi paths.

Fix by adding the proper gets and puts into the resume_rpi path.

Link: https://lore.kernel.org/r/20210514195559.119853-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix "Unexpected timeout" error in direct attach topology

An 'unexpected timeout' message may be seen in a point-2-point topology.
The message occurs when a PLOGI is received before the driver is notified
of FLOGI completion. The FLOGI completion failure causes discovery to be
triggered for a second time. The discovery timer is restarted but no new
discovery activity is initiated, thus the timeout message eventually
appears.

In point-2-point, when discovery has progressed before the FLOGI completion
is processed, it is not a failure. Add code to FLOGI completion to detect
that discovery has progressed and exit the FLOGI handling (noop'ing it).

Link: https://lore.kernel.org/r/20210514195559.119853-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix non-optimized ERSP handling

When processing an NVMe ERSP IU which didn't match the optimized CQE-only
path, the status was being left to the WQE status. WQE status is non-zero
as it is indicating a non-optimized completion that needs to be handled by
the driver.

Fix by clearing the status field when falling into the non-optimized
case. Log message added to track optimized vs non-optimized debug.

Link: https://lore.kernel.org/r/20210514195559.119853-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: Fix unreleased RPIs when NPIV ports are created

While testing NPIV and watching logins and used RPI levels, it was seen the
used RPI count was much higher than the number of remote ports discovered.

Code inspection showed that remote port removals on any NPIV instance are
releasing the RPI, but not performing an UNREG_RPI with the adapter thus
the reference counting never fully drops and the RPI is never fully
released. This was happening on NPIV nodes due to a log of fabric ELS's to
fabric addresses. This lack of UNREG_RPI was introduced by a prior node
rework patch that performed the UNREG_RPI as part of node cleanup.

To resolve the issue, do the following:

 - Restore the RPI release code, but move the location to so that it is in
   line with the new node cleanup design.

 - NPIV ports now release the RPI and drop the node when the caller sets
   the NLP_RELEASE_RPI flag.

 - Set the NLP_RELEASE_RPI flag in node cleanup which will trigger a
   release of RPI to free pool.

 - Ensure there's an UNREG_RPI at LOGO completion so that RPI release is
   completed.

 - Stop offline_prep from skipping nodes that are UNUSED. The RPI may
   not have been released.

 - Stop the default RPI handling in lpfc_cmpl_els_rsp() for SLI4.

 - Fixed up debugfs RPI displays for better debugging.

Fixes: a70e63eee1c1 ("scsi: lpfc: Fix NPIV Fabric Node reference counting")
Link: https://lore.kernel.org/r/20210514195559.119853-2-jsmart2021@gmail.com
Cc: <stable@vger.kernel.org> # v5.11+
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_dh_alua: Retry RTPG on a different path after failure

If an RTPG fails, we can't infer anything wrt. the state of the ports in
the port group except that we were unable to reach the one port on which
the RTPG had failed. "offline" is just a secondary port state, which means
that we can't infer the state of any port in the PG from the failure (in
fact, even the failed port might still be in "active/optimized" primary
port access state).

Therefore, when we encounter an RTPG failure, we should retry the RTPG on a
different port. This avoids falsely setting port states to offline for
unreachable ports. To do this, ports on which an RTPG has failed are
temporarily set to "disabled" to avoid repeating the failed I/O on the same
target port. Once the RTPG has either succeeded on one port or failed on
all ports of the PG, the ports are enabled again.

Link: https://lore.kernel.org/r/20210514153214.5626-1-mwilck@suse.com
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove redundant assignment to rval

Variable rval is set to QLA_SUCCESS but this value is never read as it is
overwritten later on. Hence it is a redundant assignment and can be
removed.

Clean up the following clang-analyzer warning:

drivers/scsi/qla2xxx/qla_init.c:4359:2: warning: Value stored to 'rval'
is never read [clang-analyzer-deadcode.DeadStores].

Link: https://lore.kernel.org/r/1620643206-127930-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Make a const array static, makes object smaller

Don't populate the const array granularity_tbl on the stack but instead
make it static. Makes the object code smaller by 190 bytes:

Before:
   text    data     bss     dec     hex filename
  25563    6908       0   32471    7ed7 ./drivers/scsi/ufs/ufs-exynos.o

After:
   text    data     bss     dec     hex filename
  25213    7068       0   32281    7e19 ./drivers/scsi/ufs/ufs-exynos.o

(gcc version 10.3.0)

Link: https://lore.kernel.org/r/20210505190104.70112-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fas216: Use fallthrough pseudo-keyword

Replace /*FALLTHROUGH*/ comment with pseudo-keyword macro 'fallthrough'.

Link: https://lore.kernel.org/r/20210518131823.2586-1-jj251510319013@gmail.com
Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Clean up whitespace

checkpatch reports the following errors:

ERROR: space prohibited before that ',' (ctx:WxW)
#945: FILE: drivers/scsi/ufs/ufshcd.h:945:
+int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
                                  ^

ERROR: space prohibited before that ',' (ctx:WxW)
#945: FILE: drivers/scsi/ufs/ufshcd.h:945:
+int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
                                                   ^
Remove unnecessary whitespace in ufshcd.h.

Link: https://lore.kernel.org/r/2038148563.21621340102306.JavaMail.epsvc@epcpadp3
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: Fix spelling mistakes in header files

Fix some spelling mistakes in comments:

  pathes ==> paths
  Resouce ==> Resource
  retreived ==> retrieved
  recevied ==> received
  interruped ==> interrupted

[mkp: kept 'keep-alives' and 'busses']

Link: https://lore.kernel.org/r/20210517095945.7363-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove leading spaces in Kconfig

Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

  $ find drivers/scsi -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'

Link: https://lore.kernel.org/r/20210517095835.81733-1-juergh@canonical.com
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Fix boolreturn.cocci warnings

drivers/target/target_core_user.c:1424:9-10: WARNING: return of 0/1 in function 'tcmu_handle_completions' with return type bool

 Return statements in functions returning bool should use
 true/false instead of 1/0.

Generated by: scripts/coccinelle/misc/boolreturn.cocci

Link: https://lore.kernel.org/r/20210515230358.GA97544@60d1edce16e0
Fixes: 9814b55cde05 ("scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found")
CC: Bodo Stroesser <bostroesser@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: Use designated initializers in ufs_pm_lvl_states[]

The comments in the enum ufs_pm_level definition are redundant. Remove the
comments from the ufs_pm_level enum and use designated initializers in the
ufs_pm_lvl_states[] definition instead.

Link: https://lore.kernel.org/r/20210519202058.12634-3-bvanassche@acm.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Propagate errors in interrupt_init_v1_hw()

After commit 6c11dc060427 ("scsi: hisi_sas: Fix IRQ checks") we have the
error codes returned by platform_get_irq() ready for the propagation
upsream in interrupt_init_v1_hw() -- that will fix still broken deferred
probing. Let's propagate the error codes from devm_request_irq() as well
since I don't see the reason to override them with -ENOENT...

Link: https://lore.kernel.org/r/49ba93a3-d427-7542-d85a-b74fe1a33a73@omp.ru
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Fix inconsistent indenting

Eliminate the follow smatch warning:

drivers/scsi/bfa/bfa_svc.c:3176 bfa_fcport_send_enable() warn:
inconsistent indenting.

Link: https://lore.kernel.org/r/1621590368-72041-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Fix typo

Change 'chnage' to 'change'.

Link: https://lore.kernel.org/r/20210521092153.379-1-zuoqilin1@163.com
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pmcraid: Fix typos

Change "avaibale" and "avaible" to "available".

Link: https://lore.kernel.org/r/20210521082808.1925-1-zuoqilin1@163.com
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_fc: Remove double FC_FPORT_DELETED in mask creation

Remove the double listed FC_FPORT_DELETING from the mask creation.

Commit 260f4aeddb48 ("scsi: scsi_transport_fc: return -EBUSY for deleted
vport") added VC_VPORT_DELETING to the flag masks. This is not necessary as
FC_FPORT_DEL is defined as VC_FPORT_DELETED | FC_FPORT_DELETING.

Link: https://lore.kernel.org/r/20210520073127.132456-1-dwagner@suse.de
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arcmsr: Update driver version to v1.50.00.05-20210429

Update driver version to v1.50.00.05-20210429.

Link: https://lore.kernel.org/r/d0c6dc6431f0e46db6583dc0d04d7983b420d4da.camel@areca.com.tw
Signed-off-by: ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arcmsr: Fix doorbell status being updated late on ARC-1886

It is possible for the IOP to be delayed in updating the doorbell
status. The doorbell status should not be 0 so loop until the value
changes.

Link: https://lore.kernel.org/r/afdfdf7eabecf14632492c4987a6b9ac6312a7ad.camel@areca.com.tw
Signed-off-by: ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Use vzalloc() instead of vmalloc()/memset(0)

Use vzalloc() instead of vmalloc() and memset(0) to simpify the code.

Link: https://lore.kernel.org/r/20210518132018.1312995-1-yangyingliang@huawei.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: ufs-exynos: Move definitions from .h to .c

In the Linux kernel definitions of data structures should occur in .c
files. Hence move the exynos7_uic_attr definition from a .h into a .c
file. Additionally, declare exynos_ufs_drvs static. This patch fixes the
following two sparse warnings:

drivers/scsi/ufs/ufs-exynos.h:248:28: warning: symbol 'exynos_ufs_drvs' was not declared. Should it be static?
drivers/scsi/ufs/ufs-exynos.h:250:28: warning: symbol 'exynos7_uic_attr' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20210509213817.4348-1-bvanassche@acm.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: 3w-9xxx: Fix endianness issues in command packets

The controller expects all data it sends/receives to be little-endian.
Therefore, the packet struct definitions should use the __le16/32/64
types. Once those are correct, sparse reports several issues with the
driver code, which are fixed here as well.

The main issue observed was at the call to scsi_set_resid(), where the
byteswapped parameter would eventually trigger the alignment check at
drivers/scsi/sd.c:2009. At that point, the kernel would continuously
complain about an "Unaligned partial completion", and no further I/O could
occur.

This gets the controller working on big endian powerpc64.

Link: https://lore.kernel.org/r/20210427235915.39211-4-samuel@sholland.org
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: 3w-9xxx: Reduce scope of structure packing

Currently, all command packet structs used by this driver are packed.
However, only one (TW_SG_Entry) actually needs to be packed, because it
uses 64-bit addresses at 32-bit alignment. To improve the quality of
generated code, stop packing all of the other command packet structs.  This
requires adjusting the type of one misaligned "reserved" member.

After this change, pahole reports that only one type had its layout change:
the tw_compat_info member of TW_Device_Extension is now naturally aligned.

Link: https://lore.kernel.org/r/20210427235915.39211-3-samuel@sholland.org
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: 3w-9xxx: Use flexible array members to avoid struct padding

In preparation for removing the "#pragma pack(1)" from the driver, fix all
instances where a trailing array member could be replaced by a flexible
array member. Since a flexible array member has zero size, it introduces no
padding, whether or not the struct is packed.

Link: https://lore.kernel.org/r/20210427235915.39211-2-samuel@sholland.org
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: be2iscsi: Remove redundant initialization

The nested for loop variables i and j in beiscsi_free_mem() are initialized
twice. The values outside of the loops are redundant and can be removed.

Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/YJ2mMHNqAgTNVVj+@fedora
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Remove redundant parenthesis

Remove unnecessary parenthesis in ufshcd_is_wb_flags() and
ufshcd_is_wbattrs().

Link: https://lore.kernel.org/r/1891546521.01620896402035.JavaMail.epsvc@epcpadp3
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Remove usfhcd_is_*_pm() macros

Remove these macros to make the UFS driver source code easier to read.
These macros were introduced by commit 57d104c153d3 ("ufs: add UFS power
management support").

Link: https://lore.kernel.org/r/20210513171229.7439-1-bvanassche@acm.org
Cc: Can Guo <cang@codeaurora.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bfa: Remove some unused variables

'lp' is unused, it is just declared and zeroed

Remove it.

Link: https://lore.kernel.org/r/d10ccee35e35bf33d651f2e0163034d7c451520b.1618944442.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Add the VERSION DESCRIPTOR fields to the INQUIRY data

Extend the standard INQUIRY data to 96 bytes and fill in the VERSION
DESCRIPTOR fields.

The layout follows SPC-4:

 - SCSI architecture standard
 - SCSI transport protocol standard
 - SCSI primary command set standard
 - SCSI device type command set standard

All version descriptor values are defined as "no version claimed" because
some initiators fail to recognize anything else.

[mkp: whitespace]

Link: https://lore.kernel.org/r/20210513192804.1252142-3-k.shelekhin@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Bump INQUIRY VERSION to SPC-4

Bump the SCSI primary command set standard to SPC-4. The upcoming version
descriptors will report newer SCSI standards (like SBC-3) that are not
defined in SPC-3.

Link: https://lore.kernel.org/r/20210513192804.1252142-2-k.shelekhin@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Add configurable IEEE Company ID attribute

Implement an attribute which provides a way to set a company specific WWN
in configfs via:

  target/core/$backstore/$name/wwn/company_id

The Open Fabrics Alliance ID 001405h remains the default.

Link: https://lore.kernel.org/r/20210420185920.42431-3-s.samoylenko@yadro.com
Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: core: Unify NAA identifier generation

Both the INQUIRY handling and the XCOPY implementation provide functions to
generate an NAA designator. In addition, these functions are poorly named:

 - spc_parse_naa_6h_vendor_specific()
 - target_xcopy_gen_naa_ieee()

Introduce a common NAA 6 designator generation function,
spc_gen_naa_6h_vendor_specific().

Link: https://lore.kernel.org/r/20210420185920.42431-2-s.samoylenko@yadro.com
Signed-off-by: Sergey Samoylenko <s.samoylenko@yadro.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: sbp_target: Remove redundant assignment to pg_size

Variable pg_size is set to '0x100 << pg_size', but this value is never read
and it is not used later on. Hence it is a redundant assignment and can be
removed.

Clean up the following clang-analyzer warning:

drivers/target/sbp/sbp_target.c:1264:3: warning: Value stored to
'pg_size' is never read [clang-analyzer-deadcode.DeadStores].

Link: https://lore.kernel.org/r/1620902977-57076-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: message: fusion: Remove redundant assignment to rc

Variable rc is set to '-1', but this value is never read as it is
overwritten later. Hence it is a redundant assignment and can be removed.

Clean up the following clang-analyzer warning:

drivers/message/fusion/mptbase.c:6996:2: warning: Value stored to 'rc'
is never read [clang-analyzer-deadcode.DeadStores].

Link: https://lore.kernel.org/r/1620814327-25427-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Reinit target retries

If rport target discovery commands fail for some reason, they get retried
up to a set number of retries. Once the retry limit is exceeded, the target
is deleted. In order to delete the target, we either need to do an implicit
logout or a move login. In the move login case, if the move login fails, we
want to retry it. This ensures the retry counter gets reinitialized so the
move login will get retried.

Link: https://lore.kernel.org/r/1620756740-7045-4-git-send-email-brking@linux.vnet.ibm.com
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Avoid move login if fast fail is enabled

If fast fail is enabled and we encounter a WWPN moving from one port id to
another port id with I/O outstanding, if we use the move login MAD,
although it will work, it will leave any outstanding I/O still outstanding
to the old port id. Eventually, the SCSI command timers will fire and we
will abort these commands, however, this is generally much longer than the
fast fail timeout, which can lead to I/O operations being outstanding for a
long time. This patch changes the behavior to avoid the move login if fast
fail is enabled. Once terminate_rport_io cleans up the rport, then we force
the target back through the delete process, which re-drives the implicit
logout, then kicks us back into discovery where we will discover the WWPN
at the new location and do a PLOGI to it.

Link: https://lore.kernel.org/r/1620756740-7045-3-git-send-email-brking@linux.vnet.ibm.com
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: Handle move login failure

When service is being performed on an SVC with NPIV enabled, the WWPN of
the canister / node being serviced fails over to the another canister /
node. This looks to the ibmvfc driver as a WWPN moving from one SCSI ID to
another. The driver will first attempt to do an implicit logout of the old
SCSI ID. If this works, we simply delete the rport at the old location and
add an rport at the new location and the FC transport class handles
everything. However, if there is I/O outstanding, this implicit logout will
fail, in which case we will send a "move login" request to the VIOS. This
will cancel any outstanding I/O to that port, logout the port, and PLOGI
the new port. Recently we've encountered a scenario where the move login
fails. This was resulting in an attempted plogi to the new scsi id, without
the old scsi id getting logged out, which is a VIOS protocol violation. To
solve this, we want to keep tracking the old scsi id as the current scsi
id. That way, once terminate_rport_io cancels the outstanding i/o, it will
send us back through to do an implicit logout of the old scsi id, rather
than the new scsi id, and then we can plogi the new scsi id.

Link: https://lore.kernel.org/r/1620756740-7045-2-git-send-email-brking@linux.vnet.ibm.com
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Rename TCM_DEV_BIT_PLUGGED to TCMU_DEV_BIT_PLUGGED

The bit definition TCM_DEV_BIT_PLUGGED should correctly be named
TCMU_DEV_BIT_PLUGGED, since all other bits in the same bitfield have prefix
TCMU_.

Link: https://lore.kernel.org/r/20210512140654.31249-1-bostroesser@gmail.com
Signed-off-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Fix a comment in function scsi_host_dev_release()

Commit 3be8828fc507 ("scsi: core: Avoid that ATA error handling can
trigger a kernel hang or oops") moved rcu to scsi_cmnd instead of
shost. Modify "shost->rcu" to "scmd->rcu" in a comment.

Link: https://lore.kernel.org/r/1620646526-193154-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Drop unnecessary NULL checks after container_of()

The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure, which is not the case here.
The NULL checks are therefore unnecessary and misleading. Remove them.

The changes in this patch were made automatically using the following
Coccinelle script.

@@
type t;
identifier v;
statement s;
@@

<+...
(
  t v = container_of(...);
|
  v = container_of(...);
)
  ...
  when != v
- if (\( !v \| v == NULL \) ) s
...+>

Link: https://lore.kernel.org/r/20210510041211.2051325-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: iscsi: Drop unnecessary container_of()

The structure pointer passed to container_of() is never NULL; that was
already checked. That means that the result of container_of() operations
on it is also never NULL, even though se_node_acl is the first element
of the structure embedding it. On top of that, it is misleading to perform
a NULL check on the result of container_of() because the position of the
contained element could change, which would make the test invalid.
Remove the unnecessary NULL check.

As it turns out, the container_of operation was only made for the purpose
of the NULL check. If the container_of is actually needed, it is repeated
later. Remove the container_of operation as well.

The NULL check was identified and removed with the following Coccinelle
script.

@@
type t;
identifier v;
statement s;
@@

<+...
(
  t v = container_of(...);
|
  v = container_of(...);
)
  ...
  when != v
- if (\( !v \| v == NULL \) ) s
...+>

Link: https://lore.kernel.org/r/20210510040817.2050266-1-linux@roeck-us.net
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Hou Pu <houpu@bytedance.com>
Cc: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_debug: Drop if with an always false condition

to_sdebug_host() is a container_of operation, so it never returns NULL.

Link: https://lore.kernel.org/r/20210506203206.254258-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: snic: Fix an error message

'ret' is known to be 0 here. No error code is available so just remove
'ret' from the error message.

While at it, change the word "Queuing" into "Init" which looks more
appropriate.

Link: https://lore.kernel.org/r/3b9d5d767e09d03a07bede293a6ba32e3735cd1a.1620326191.git.christophe.jaillet@wanadoo.fr
Fixes: c8806b6c9e82 ("snic: driver for Cisco SCSI HBA")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: cxgbit: Unmap DMA buffer before calling target_execute_cmd()

Instead of calling dma_unmap_sg() after completing WRITE I/O, call
dma_unmap_sg() before calling target_execute_cmd() to sync the DMA buffer.

Link: https://lore.kernel.org/r/1618403949-3443-1-git-send-email-varun@chelsio.com
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Introduce HBA performance monitor sysfs nodes

Add a new sysfs group which has nodes to monitor data/request transfer
performance. This sysfs group has nodes showing total sectors/requests
transferred, total busy time spent and max/min/avg/sum latencies. This
group can be enhanced later to show more UFS driver layer performance
statistics data during runtime.

Link: https://lore.kernel.org/r/1619058521-35307-2-git-send-email-cang@codeaurora.org
Reviewed-by: Daejun Park <daejun7.park@samsung.com>
Acked-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Replace one-element array with flexible-array member

There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Refactor the code according to the use of a flexible-array member in struct
aac_raw_io2 instead of one-element array, and use the struct_size() helper.

Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warnings:

drivers/scsi/aacraid/aachba.c: In function ‘aac_build_sgraw2’:
drivers/scsi/aacraid/aachba.c:3970:18: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 3970 |     if (rio2->sge[j].length % (i*PAGE_SIZE)) {
      |         ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:3974:27: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 3974 |     nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE));
      |                  ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:4011:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 4011 |   for (j = 0; j < rio2->sge[i].length / (pages * PAGE_SIZE); ++j) {
      |                   ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:4012:24: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 4012 |    addr_low = rio2->sge[i].addrLow + j * pages * PAGE_SIZE;
      |               ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:4014:33: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 4014 |    sge[pos].addrHigh = rio2->sge[i].addrHigh;
      |                        ~~~~~~~~~^~~
drivers/scsi/aacraid/aachba.c:4015:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds]
 4015 |    if (addr_low < rio2->sge[i].addrLow)
      |                   ~~~~~~~~~^~~

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Link: https://lore.kernel.org/lkml/60414244.ur4%2FkI+fBF1ohKZs%25lkp@intel.com/
Link: https://lore.kernel.org/r/20210421185611.GA105224@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Build-tested-by: kernel test robot <lkp@intel.com>

scsi: ufs: sysfs: Resume the proper SCSI device

Resume the SCSI device described by the unit descriptor instead of the HBA.

Link: https://lore.kernel.org/r/889bb20c47cc1ae5e40390f533712b704000345b.1619223249.git.asutoshd@codeaurora.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Enable power management for wlun

During runtime-suspend of ufs host, the SCSI devices are already suspended
and so are the queues associated with them. However, the ufs host sends SSU
(START_STOP_UNIT) to the wlun during runtime-suspend.

During the process blk_queue_enter() checks if the queue is not in suspended
state. If so, it waits for the queue to resume, and never comes out of
it. Commit 52abca64fd94 ("scsi: block: Do not accept any requests while
suspended") adds the check to see if the queue is in suspended state in
blk_queue_enter().

Call trace:
 __switch_to+0x174/0x2c4
 __schedule+0x478/0x764
 schedule+0x9c/0xe0
 blk_queue_enter+0x158/0x228
 blk_mq_alloc_request+0x40/0xa4
 blk_get_request+0x2c/0x70
 __scsi_execute+0x60/0x1c4
 ufshcd_set_dev_pwr_mode+0x124/0x1e4
 ufshcd_suspend+0x208/0x83c
 ufshcd_runtime_suspend+0x40/0x154
 ufshcd_pltfrm_runtime_suspend+0x14/0x20
 pm_generic_runtime_suspend+0x28/0x3c
 __rpm_callback+0x80/0x2a4
 rpm_suspend+0x308/0x614
 rpm_idle+0x158/0x228
 pm_runtime_work+0x84/0xac
 process_one_work+0x1f0/0x470
 worker_thread+0x26c/0x4c8
 kthread+0x13c/0x320
 ret_from_fork+0x10/0x18

Fix this by registering ufs device wlun as a SCSI driver and registering it
for block runtime-pm. Also make this a supplier for all other LUNs. This
way the wlun device suspends after all the consumers and resumes after HBA
resumes. This also registers a new SCSI driver for rpmb wlun. This new
driver is mostly used to clear rpmb uac.

[mkp: resolve merge conflict with 5.13-rc1 and fix doc warning]

Fixed smatch warnings:
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/4662c462e79e3e7f541f54f88f8993f421026d83.1619223249.git.asutoshd@codeaurora.org
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Simplify conditional

Fix the following coccicheck warning:

./drivers/scsi/qla4xxx/ql4_83xx.c:475:23-25: WARNING !A || A && B is
equivalent to !A || B

Link: https://lore.kernel.org/r/20210414121726.12503-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arcmsr: Update driver version to v1.50.00.04-20210414

Update driver version to v1.50.00.04-20210414.

Link: https://lore.kernel.org/r/1ca5474a5c6fea59bf13cdf84f7bd17f0b20f562.camel@areca.com.tw
Signed-off-by: ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: arcmsr: Fix the wrong CDB payload report to IOP

This patch fixes the wrong CDB payload report to IOP.

Link: https://lore.kernel.org/r/d2c97df3c817595c6faf582839316209022f70da.camel@areca.com.tw
Signed-off-by: ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Use DEFINE_SPINLOCK() for spinlock

spinlock can be initialized automatically with DEFINE_SPINLOCK() rather
than explicitly calling spin_lock_init().

Link: https://lore.kernel.org/r/20210329094532.4165147-1-liushixin2@huawei.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_mbox: Remove redundant initialization of pointer mbox

The pointer mbox is being initialized with a value that is never read and
it is being updated later with a new value.  The initialization is
redundant and can be removed.

Link: https://lore.kernel.org/r/20210420104919.376734-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")

scsi: lpfc: Remove redundant assignment to pointer temp_hdr

The pointer tmp_hdr is being assigned a value that is never read, the
assignment is redundant and can be removed.

Link: https://lore.kernel.org/r/20210420104123.376420-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: 3w-9xxx: Move * operator to clean up code style warning

Checkpatch is warning that char* text sould be char *text to match the
coding style. Fix this.

Link: https://lore.kernel.org/r/20210416094713.2033212-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>