drm/i915: Protect timeline->hwsp dereferencing

As not only is the signal->timeline volatile, so will be acquiring the
timeline's HWSP. We must first carefully acquire the timeline from the
signaling request and then lock the timeline. With the removal of the
struct_mutex serialisation of request construction, we can have multiple
timelines active at once, and so we must avoid using the nested mutex
lock as it is quite possible for both timelines to be establishing
semaphores on the other and so deadlock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-3-chris@chris-wilson.co.uk

drm/i915: Lock signaler timeline while navigating

As we need to take a walk back along the signaler timeline to find the
fence before upon which we want to wait, we need to lock that timeline
to prevent it being modified as we walk. Similarly, we also need to
acquire a reference to the earlier fence while it still exists!

Though we lack the correct locking today, we are saved by the
overarching struct_mutex -- but that protection is being removed.

v2: Tvrtko made me realise I was being lax and using annotations to
ignore the AB-BA deadlock from the timeline overlap. As it would be
possible to construct a second request that was using a semaphore from the
same timeline as ourselves, we could quite easily end up in a situation
where we deadlocked in our mutex waits. Avoid that by using a trylock
and falling back to a normal dma-fence await if contended.

v3: Eek, the signal->timeline is volatile and must be carefully
dereferenced to ensure it is valid.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-2-chris@chris-wilson.co.uk

drm/i915: Mark i915_request.timeline as a volatile, rcu pointer

The request->timeline is only valid until the request is retired (i.e.
before it is completed). Upon retiring the request, the context may be
unpinned and freed, and along with it the timeline may be freed. We
therefore need to be very careful when chasing rq->timeline that the
pointer does not disappear beneath us. The vast majority of users are in
a protected context, either during request construction or retirement,
where the timeline->mutex is held and the timeline cannot disappear. It
is those few off the beaten path (where we access a second timeline) that
need extra scrutiny -- to be added in the next patch after first adding
the warnings about dangerous access.

One complication, where we cannot use the timeline->mutex itself, is
during request submission onto hardware (under spinlocks). Here, we want
to check on the timeline to finalize the breadcrumb, and so we need to
impose a second rule to ensure that the request->timeline is indeed
valid. As we are submitting the request, it's context and timeline must
be pinned, as it will be used by the hardware. Since it is pinned, we
know the request->timeline must still be valid, and we cannot submit the
idle barrier until after we release the engine->active.lock, ergo while
submitting and holding that spinlock, a second thread cannot release the
timeline.

v2: Don't be lazy inside selftests; hold the timeline->mutex for as long
as we need it, and tidy up acquiring the timeline with a bit of
refactoring (i915_active_add_request)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919111912.21631-1-chris@chris-wilson.co.uk

drm/i915/tgl: Suspend pre-parser across GTT invalidations

Before we execute a batch, we must first issue any and all TLB
invalidations so that batch picks up the new page table entries.
Tigerlake's preparser is weakening our post-sync CS_STALL inside the
invalidate pipe-control and allowing the loading of the batch buffer
before we have setup its page table (and so it loads the wrong page and
executes indefinitely).

The igt_cs_tlb indicates that this issue can only be observed on rcs,
even though the preparser is common to all engines. Alternatively, we
could do TLB shootdown via mmio on updating the GTT.

By inserting the pre-parser disable inside EMIT_INVALIDATE, we will also
accidentally fixup execution that writes into subsequent batches, such
as gem_exec_whisper and even relocations performed on the GPU. We should
be careful not to allow this disable to become baked into the uABI! The
issue is that if userspace relies on our disabling of the HW
optimisation, when we are ready to enable that optimisation, userspace
will then be broken...

Testcase: igt/i915_selftests/live_gtt/igt_cs_tlb
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111753
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919151811.9526-1-chris@chris-wilson.co.uk

drm/i915: Don't advertise modes that exceed the max plane size

Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
planes' max resolution. This has the nasty implication that modes on the
connectors' mode list may not be usable when the user asks for a
fullscreen plane. Seeing as that is the most common use case it seems
prudent to filter out modes that don't allow for fullscreen planes to
be enabled.

Let's do that in the connetor .mode_valid() hook so that normally
such modes are kept hidden but the user is still able to forcibly
specify such a mode if they know they don't need fullscreen planes.

This is in line with ealier policies regarding certain clock limits.
The idea is to prevent the casual user from encountering a mode that
would fail under typical conditions, but allow the expert user to
force things if they so wish.

Maybe in the future we should consider automagically using two
planes when one can't cover the entire screen? Wouldn't be a
great match for the current uapi with explicit planes though,
but I guess no worse than using two pipes (which we apparently
have to in the future anyway). Either that or we'd have to
teach userspace to do it for us.

v2: Fix icl+ max plane heigth (Manasi)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Leho Kraav <leho@kraav.com>
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918150707.32420-1-ville.syrjala@linux.intel.com

drm/i915: Bump skl+ max plane width to 5k for linear/x-tiled

The officially validated plane width limit is 4k on skl+, however
we already had people using 5k displays before we started to enforce
the limit. Also it seems Windows allows 5k resolutions as well
(though not sure if they do it with one plane or two).

According to hw folks 5k should work with the possible
exception of the following features:
- Ytile (already limited to 4k)
- FP16 (already limited to 4k)
- render compression (already limited to 4k)
- KVMR sprite and cursor (don't care)
- horizontal panning (need to verify this)
- pipe and plane scaling (need to verify this)

So apart from last two items on that list we are already
fine. We should really verify what happens with those last
two items but I don't have a 5k display on hand atm so it'll
have to wait.

In the meantime let's just bump the limit back up to 5k since
several users have already been using it without apparent issues.
At least we'll be no worse off than we were prior to lowering
the limits.

Cc: stable@vger.kernel.org
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Leho Kraav <leho@kraav.com>
Fixes: 372b9ffb5799 ("drm/i915: Fix skl+ max plane width")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111501
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905135044.2001-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>

drm/i915/tgl: Implement Wa_1406941453

Enable Small PL for power benefit.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-18-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190726000226.26914-4-lucas.demarchi@intel.com

drm/i915/tgl: Implement Wa_1409142259

Disable CPS aware color pipe by setting chicken bit.

BSpec: 52890
HSDES: 1409142259

v2: Move WA to ctx WA's(Daniele)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909231445.23815-1-radhakrishna.sripada@intel.com
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>

drm/i915: Unify ICP and MCC hotplug pin tables

The MCC hpd table is just a subset of the ICP table; we can eliminate it
and use the ICP table everywhere.  The extra pins in the table won't be
a problem for MCC since we still supply an appropriate hotplug trigger
mask anywhere the pin table is used.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918235626.3750-2-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Future-proof DDC pin mapping

We generally assume future platforms will inherit the behavior of the
most recent platforms, so update our DDC pin mapping defaults to match
how ICP/TGP behave (i.e., pins starting from GMBUS_PIN_1_BXT for combo
PHY's and pins starting from GMBUS_PIN_9_TC1_ICP for TC PHY's).  MCC's
non-standard handling of combo PHY C seems like a platform-specific
quirk that is unlikely to be duplicated on future platforms, so continue
handling it as a special case.

Without this change, future platforms would default to gen4-style pin
mapping which is almost certainly not what we'll want.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918235626.3750-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/selftests: Exercise CS TLB invalidation

Check that we are correctly invalidating the TLB at the start of a
batch after updating the GTT.

v2: Comments and hold the request reference while spinning

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919131414.7495-1-chris@chris-wilson.co.uk

drm/i915: Verify the engine after acquiring the active.lock

When using virtual engines, the rq->engine is not stable until we hold
the engine->active.lock (as the virtual engine may be exchanged with the
sibling). Since commit 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
we may retire a request concurrently with resubmitting it to HW, we need
to be extra careful to verify we are holding the correct lock for the
request's active list. This is similar to the issue we saw with
rescheduling the virtual requests, see sched_lock_engine().

Or else:

<4> [876.736126] list_add corruption. prev->next should be next (ffff8883f931a1f8), but was dead000000000100. (prev=ffff888361ffa610).
<4> [876.736136] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70
<4> [876.736137] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915]
<4> [876.736154] CPU: 2 PID: 21 Comm: ksoftirqd/2 Tainted: G     U            5.3.0-CI-CI_DRM_6898+ #1
<4> [876.736156] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4> [876.736157] RIP: 0010:__list_add_valid+0x4d/0x70
<4> [876.736159] Code: c3 48 89 d1 48 c7 c7 20 33 0e 82 48 89 c2 e8 4a 4a bc ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 70 33 0e 82 e8 33 4a bc ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 c0 33 0e 82 e8
<4> [876.736160] RSP: 0018:ffffc9000018bd30 EFLAGS: 00010082
<4> [876.736162] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000104
<4> [876.736163] RDX: 0000000080000104 RSI: 0000000000000000 RDI: 00000000ffffffff
<4> [876.736164] RBP: ffffc9000018bd68 R08: 0000000000000000 R09: 0000000000000001
<4> [876.736165] R10: 00000000aed95de3 R11: 000000007fe927eb R12: ffff888361ffca10
<4> [876.736166] R13: ffff888361ffa610 R14: ffff888361ffc880 R15: ffff8883f931a1f8
<4> [876.736168] FS:  0000000000000000(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000
<4> [876.736169] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [876.736170] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0
<4> [876.736171] PKRU: 55555554
<4> [876.736172] Call Trace:
<4> [876.736226]  __i915_request_submit+0x152/0x370 [i915]
<4> [876.736263]  __execlists_submission_tasklet+0x6da/0x1f50 [i915]
<4> [876.736293]  ? execlists_submission_tasklet+0x29/0x50 [i915]
<4> [876.736321]  execlists_submission_tasklet+0x34/0x50 [i915]
<4> [876.736325]  tasklet_action_common.isra.5+0x47/0xb0
<4> [876.736328]  __do_softirq+0xd8/0x4ae
<4> [876.736332]  ? smpboot_thread_fn+0x23/0x280
<4> [876.736334]  ? smpboot_thread_fn+0x6b/0x280
<4> [876.736336]  run_ksoftirqd+0x2b/0x50
<4> [876.736338]  smpboot_thread_fn+0x1d3/0x280
<4> [876.736341]  ? sort_range+0x20/0x20
<4> [876.736343]  kthread+0x119/0x130
<4> [876.736345]  ? kthread_park+0xa0/0xa0
<4> [876.736347]  ret_from_fork+0x24/0x50
<4> [876.736353] irq event stamp: 2290145
<4> [876.736356] hardirqs last  enabled at (2290144): [<ffffffff8123cde8>] __slab_free+0x3e8/0x500
<4> [876.736358] hardirqs last disabled at (2290145): [<ffffffff819cfb4d>] _raw_spin_lock_irqsave+0xd/0x50
<4> [876.736360] softirqs last  enabled at (2290114): [<ffffffff81c0033e>] __do_softirq+0x33e/0x4ae
<4> [876.736361] softirqs last disabled at (2290119): [<ffffffff810b815b>] run_ksoftirqd+0x2b/0x50
<4> [876.736363] WARNING: CPU: 2 PID: 21 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70
<4> [876.736364] ---[ end trace 3e58d6c7356c65bf ]---
<4> [876.736406] ------------[ cut here ]------------
<4> [876.736415] list_del corruption. prev->next should be ffff888361ffca10, but was ffff88840ac2c730
<4> [876.736421] WARNING: CPU: 2 PID: 5490 at lib/list_debug.c:53 __list_del_entry_valid+0x79/0x90
<4> [876.736422] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul snd_intel_nhlt snd_hda_codec snd_hwdep snd_hda_core ghash_clmulni_intel e1000e cdc_ether usbnet mii snd_pcm ptp pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc [last unloaded: i915]
<4> [876.736433] CPU: 2 PID: 5490 Comm: i915_selftest Tainted: G     U  W         5.3.0-CI-CI_DRM_6898+ #1
<4> [876.736435] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4> [876.736436] RIP: 0010:__list_del_entry_valid+0x79/0x90
<4> [876.736438] Code: 0b 31 c0 c3 48 89 fe 48 c7 c7 30 34 0e 82 e8 ae 49 bc ff 0f 0b 31 c0 c3 48 89 f2 48 89 fe 48 c7 c7 68 34 0e 82 e8 97 49 bc ff <0f> 0b 31 c0 c3 48 c7 c7 a8 34 0e 82 e8 86 49 bc ff 0f 0b 31 c0 c3
<4> [876.736439] RSP: 0018:ffffc900003ef758 EFLAGS: 00010086
<4> [876.736440] RAX: 0000000000000000 RBX: ffff888361ffc840 RCX: 0000000000000002
<4> [876.736442] RDX: 0000000080000002 RSI: 0000000000000000 RDI: 00000000ffffffff
<4> [876.736443] RBP: ffffc900003ef780 R08: 0000000000000000 R09: 0000000000000001
<4> [876.736444] R10: 000000001418e4b7 R11: 000000007f0ea93b R12: ffff888361ffcab8
<4> [876.736445] R13: ffff88843b6d0000 R14: 000000000000217c R15: 0000000000000001
<4> [876.736447] FS:  00007f4e6f255240(0000) GS:ffff88849fd00000(0000) knlGS:0000000000000000
<4> [876.736448] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [876.736449] CR2: 00007f093a9173c0 CR3: 00000003bba08005 CR4: 0000000000760ee0
<4> [876.736450] PKRU: 55555554
<4> [876.736451] Call Trace:
<4> [876.736488]  i915_request_retire+0x224/0x8e0 [i915]
<4> [876.736521]  i915_request_create+0x4b/0x1b0 [i915]
<4> [876.736550]  nop_virtual_engine+0x230/0x4d0 [i915]

Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111695
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190918145453.8800-1-chris@chris-wilson.co.uk

drm/i915: fix SFC reset flow

Our assumption that the we can ask the HW to lock the SFC even if not
currently in use does not match the HW commitment. The expectation from
the HW is that SW will not try to lock the SFC if the engine is not
using it and if we do that the behavior is undefined; on ICL the HW
ends up to returning the ack and ignoring our lock request, but this is
not guaranteed and we shouldn't expect it going forward.

Also, failing to get the ack while the SFC is in use means that we can't
cleanly reset it, so fail the engine reset in that scenario.

v2: drop rmw change, keep the log as debug and handle failure (Chris),
    improve comments (Tvrtko).

Reported-by: Owen Zhang <owen.zhang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190919015330.15435-1-daniele.ceraolospurio@intel.com

drm/i915: Extend Haswell GT1 PSMI workaround to all

A few times in CI, we have detected a GPU hang on our Haswell GT2
systems with the characteristic IPEHR of 0x780c0000. When the PSMI w/a
was first introducted, it was applied to all Haswell, but later on we
found an erratum that supposedly restricted the issue to GT1 and so
constrained it only be applied on GT1. That may have been a mistake...

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111692
Fixes: 167bc759e823 ("drm/i915: Restrict PSMI context load w/a to Haswell GT1")
References: 2c550183476d ("drm/i915: Disable PSMI sleep messages on all rings around context switches")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917194746.26710-1-chris@chris-wilson.co.uk

drm/i915/cml: Add second PCH ID for CMP

The CMP PCH ID we have in the driver is correct for the CML-U machines we have
in our CI system, but the CML-S and CML-H CI machines appear to use a
different PCH ID, leading our driver to detect no PCH for them.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
References: 729ae330a0f2e2 ("drm/i915/cml: Introduce Comet Lake PCH")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111461
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190916233251.387-1-matthew.d.roper@intel.com

drm/i915/tgl: Extend MI_SEMAPHORE_WAIT

On Tigerlake, MI_SEMAPHORE_WAIT grew an extra dword, so be sure to
update the length field and emit that extra parameter and any padding
noop as required.

v2: Define the token shift while we are adding the updated MI_SEMAPHORE_WAIT
v3: Use int instead of bool in the addition so that readers are not left
wondering about the intricacies of the C spec. Now they just have to
worry what the integer value of a boolean operation is...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917123055.28965-1-chris@chris-wilson.co.uk

drm/i915: Only apply a rmw mmio update if the value changes

If we try to clear, or even set, a bit in the register that doesn't
change the register state; skip the write. There's a slight danger in
that the register acts as a latch-on-write, but I do not think we use a
rmw cycle with any such latch registers.

Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190917080029.27632-1-chris@chris-wilson.co.uk

drm/i915: Show the logical context ring state on dumping

Include the active context register state when dumping the engine.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190915203701.29163-1-chris@chris-wilson.co.uk

drm/i915: stop conflating HAS_DISPLAY() and disabled display

Stop setting ->pipe_mask to zero when display is disabled, allowing us
to have different code paths for not actually having display hardware,
and having display hardware disabled. This lets us develop those two
avenues independently.

There are no functional changes for when there is no display. However,
all uses of for_each_pipe() and for_each_pipe_masked() will start
running for the disabled display case. Put one of the more significant
ones behind checks for INTEL_DISPLAY_ENABLED(), otherwise the cases
should not be hit with disabled display, or they seem benign. Fingers
crossed.

All in all, this might not be the ideal solution. In fact we may have
had something along the lines of this in the past, but we ended up
conflating the two cases. Possibly even by recommendation by yours
truly; I did not dare dig up that part of the history. But the perfect
is the enemy of the good, this is a straightforward change, and lets us
get actual work done in both fronts without interfering with each other.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190916092901.31440-1-jani.nikula@intel.com

drm/i915: s/pipe_config/crtc_state/ in intel_crtc_atomic_check()

Clean up the mess with the drm vs. intel types in
intel_crtc_atomic_check() and rename varibles accordingly.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-5-ville.syrjala@linux.intel.com

drm/i915: Extract intel_modeset_calc_cdclk()

Exfiltrate the cdclk code from intel_modeset_checks() into
intel_modeset_calc_cdclk().

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-4-ville.syrjala@linux.intel.com

drm/i915: Allow downscale factor of <3.0 on glk+ for all formats

Bspec says that glk+ max downscale factor is <3.0 for all pixel formats.
Older platforms had a max of <2.0 for NV12. Update the code to deal with
this.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-3-ville.syrjala@linux.intel.com

drm/i915: Replace is_planar_yuv_format() with drm_format_info_is_yuv_semiplanar()

There's a helper in drm_fourcc.h these days to check of we're dealing
with a two plane YUV format. Make use if it.

Also s/plane/color_plane/ in skl_plane_relative_data_rate() to reduce
the confusion.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913193157.9556-2-ville.syrjala@linux.intel.com

drm/i915: introduce INTEL_DISPLAY_ENABLED()

Prepare for making a distinction between not having display and having
disabled display. Add INTEL_DISPLAY_ENABLED() and use it where
HAS_DISPLAY() is used after intel_device_info_runtime_init(). This is
initially duplication, as disabling display still leads to ->pipe_mask =
0 and HAS_DISPLAY() being false.

Note that ever since i915.display_disable was introduced, it has not
affected PCH detection even if it uses HAS_DISPLAY(), as display disable
happens after that.

Since INTEL_DISPLAY_ENABLED() will not make sense unless HAS_DISPLAY()
is true, include a warning for catching misuses making decisions on
INTEL_DISPLAY_ENABLED() when HAS_DISPLAY() is false.

v2: Remove INTEL_DISPLAY_ENABLED() check from intel_detect_pch() (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913100407.30991-1-jani.nikula@intel.com

drm/i915/tgl: Re-enable rc6

We think that we got rc6 problems sorted out. Flip the switch
and let CI expose our tendency to naive optimism.

Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913200638.31939-1-chris@chris-wilson.co.uk

drm/i915/tgl: Introduce gen12 forcewake ranges

The media ranges extend beyond what gen11 gives so we can't piggypack
on gen11 ranges, even on read side.

Introduce a table for gen12 and accessors for it.

v2: correctly implement gen12_fwtable_write/read (Daniele)
v3: update with ranges from bspec.
v4: avoid GEN11_NEEDS_FORCEWAKE (Mika)
v5: bspec ref (Daniele)

BSpec: 52078
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913141652.27958-2-mika.kuoppala@linux.intel.com

drm/i915: Update Gen11 forcewake ranges

Daniele noticed new render ranges in Gen11 fw table.

Bspec: 18331
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913141652.27958-1-mika.kuoppala@linux.intel.com

drm/i915/tgl: Limit ourselves to just rcs0

More pruning away of features until we have a stable system and a basis
for debugging what's missing.

v2: Fixup vdbox/vebox fusing

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913145556.23912-1-chris@chris-wilson.co.uk

drm/i915: Don't mix srcu tag and negative error codes

While srcu may use an integer tag, it does not exclude potential error
codes and so may overlap with our own use of -EINTR. Use a separate
outparam to store the tag, and report the error code separately.

Fixes: 2caffbf11762 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912160834.30601-1-chris@chris-wilson.co.uk

drm/i915/display/icl: Bump up the plane/fb height

On ICL+, the max supported plane height is 4320, so bump it up
To support 4320, we need to increase the number of bits used to
read plane_height to 13 as opposed to older 12 bits.

v4:
* Adjust the width mask also since extra bits are mbz (Ville)
v3:
* Use 0xffff for mask as extra bits are mbz (Ville)
v2:
* ICL plane height supported is 4320 (Ville)
* Add a new line between max width and max height (Jose)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712203808.4126-1-manasi.d.navare@intel.com

drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits

On ICL+, the vertical limits for the transcoders are increased to 8192
and horizontal limits are bumped to 16K so bump up
limits in intel_mode_valid()

v4:
* Increase the hdisplay to 16K (Ville)
v3:
* Supported starting ICL (Ville)
* Use the higher limits from TRANS_VTOTAL register (Ville)
v2:
* Checkpatch warning (Manasi)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712202214.3906-1-manasi.d.navare@intel.com

drm/i915/gtt: Make sure the gen6 ppgtt is bound before first use

As we remove the struct_mutex protection from around the vma pinning,
counters need to be atomic and aware that there may be multiple threads
simultaneously active.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190913064200.24297-1-chris@chris-wilson.co.uk

drm/i915/selftests: Keep the engine awake while we keep for preemption

Keep the engine awake to ensure that we don't inject any pm-idle
requests.

References: https://bugs.freedesktop.org/show_bug.cgi?id=111108
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912122639.25224-1-chris@chris-wilson.co.uk

drm/i915: Get the correct wakeref for reading HOTPLUG_EN et al.

Without it we get:
 Unclaimed read from register 0x1e1110
 WARNING: CPU: 2 PID: 1029 at drivers/gpu/drm/i915/intel_uncore.c:1101 __unclaimed_reg_debug+0x40/0x50 [i915]
 Call Trace:
  fwtable_read32+0x233/0x300 [i915]
  i915_interrupt_info+0xa73/0xd60 [i915]
  seq_read+0xdb/0x3c0
  full_proxy_read+0x51/0x80
  vfs_read+0x9e/0x160
  ksys_read+0x8f/0xe0
  do_syscall_64+0x55/0x1c0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109824
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912125418.23115-2-arkadiusz.hiler@intel.com

drm/i915/tgl: Disable preemption while being debugged

We see failures where the context continues executing past a
preemption event, eventually leading to situations where a request has
executed before we have event submitted it to HW! It seems like tgl is
ignoring our RING_TAIL updates, but more likely is that there is a
missing update required for our semaphore waits around preemption.

v2: And disable internal semaphore usage

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912132313.12751-1-chris@chris-wilson.co.uk

drm/i915/pmu: Use GT parked for estimating RC6 while asleep

As we track when we put the GT device to sleep upon idling, we can use
that callback to sample the current rc6 counters and record the
timestamp for estimating samples after that point while asleep.

v2: Stick to using ktime_t
v3: Track user_wakerefs that interfere with the new
intel_gt_pm_wait_for_idle
v4: No need for parked/unparked estimation if !CONFIG_PM
v5: Keep timer park/unpark logic as was
v6: Refactor duplicated estimate/update rc6 logic
v7: Pull intel_get_pm_get_if_awake() out from the pmu->lock.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912124813.19225-1-chris@chris-wilson.co.uk

drm/i915: convert device info num_pipes to pipe_mask

Replace device info number of pipes with a bit mask of available
pipes. This will prove handy in the future. There's still a bunch of
future work to do to actually allow a non-consecutive mask of pipes, but
it's a start. No functional changes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911202908.19631-1-jani.nikula@intel.com

drm/i915/pmu: Skip busyness sampling when and where not needed

Since d0aa694b9239 ("drm/i915/pmu: Always sample an active ringbuffer")
the cost of sampling the engine state on execlists platforms became a
little bit higher when both engine busyness and one of the wait states are
being monitored. (Previously the busyness sampling on legacy platforms was
done via seqno comparison so there was no cost of mmio read.)

We can avoid that by skipping busyness sampling when engine supports
software busy stats and so avoid the cost of potential mmio read and
sample accumulation.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911160730.22687-1-tvrtko.ursulin@linux.intel.com

drm/i915/execlists: Ensure the context is reloaded after a GPU reset

After we manipulate the context to allow replay after a GPU reset, force
that context to be reloaded. This should be a layer of paranoia, for if
the GPU was reset, the context will no longer be resident!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912092933.4729-2-chris@chris-wilson.co.uk

drm/i915/execlists: Add a paranoid flush of the CSB pointers upon reset

After a GPU reset, we need to drain all the CS events so that we have an
accurate picture of the execlists state at the time of the reset. Be
paranoid and force a read of the CSB write pointer from memory.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190912092933.4729-1-chris@chris-wilson.co.uk

drm/i915: Disable FBC if BIOS reserved memory (stolen) is unavailable

The FBC requires a couple of contiguous buffers, which we allocate from
stolen memory. If stolen memory is unavailable, we cannot allocate those
buffers and so cannot support FBC. Mark it so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911175926.31365-1-chris@chris-wilson.co.uk

drm/i915: Remove duplicated bxt/cnl/icl .modeset_calc_cdclk() funcs

Reuse the same .modeset_calc_cdclk() function for all bxt+.

The only difference in between the cnl/icl and the bxt variants
is the call to cnl_compute_min_voltage_level(). We can do that call
just fine on older platforms since they leave min_voltage_level[]
zeroed. Let's rename the function to bxt_compute_min_voltage_level()
just so it stays consistent with the rest of the naming scheme.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-4-ville.syrjala@linux.intel.com

drm/i915: Reuse cnl_modeset_calc_cdclk() on icl+

The cnl and icl .modeset_calc_cdclk() functions are identical. Drop one
copy.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-3-ville.syrjala@linux.intel.com

drm/i915: Fix CD2X pipe select masking during cdclk sanitation

We're forgetting to mask off all three pipe select bits from the
CDCLK_CTL value on icl+ which may lead to the extra bit being
left in. That will cause us to consider the current hardware
cdclk state as invalid, and we proceed to sanitize it even
though the hardware may have active pipes and whatnot.

Fix up the mask so we get rid of all three pipe select bits
and thus hopefully no longer sanitize cdclk when it's already
correctly programmed.

Cc: Matt Roper <matthew.d.roper@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111641
Fixes: 0c1279b58fc7 ("drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-2-ville.syrjala@linux.intel.com

drm/i915: Fix cdclk bypass freq readout for tgl/bxt/glk

On tgl/bxt/glk the cdclk bypass frequency depends on the PLL
reference clock. So let's read out the ref clock before we
try to compute the bypass clock.

Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 71dc367e2bc3 ("drm/i915: Consolidate bxt/cnl/icl cdclk readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911133129.27466-1-ville.syrjala@linux.intel.com

drm/i915: add INTEL_NUM_PIPES() and use it

Abstract away direct access to ->num_pipes to allow further
refactoring. No functional changes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911092608.13009-1-jani.nikula@intel.com

drm/i915: Squeeze iommu status into debugfs/i915_capabilities

There's no easy way of checking whether iommu is enabled for the GPU
(you can grep dmesg if you know the device, or you can grep
i915_gpu_info if that's available). We do have a central
i915_capabilities with the intent of listing such pertinent information,
so add the iommu status.

Suggested-by: Martin Peres <martin.peres@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Martin Peres <martin.peres@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Martin Peres <martin.peres@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911114655.9254-1-chris@chris-wilson.co.uk

drm/i915/tgl: Disable read-only ppgtt support

The same read-only affliction as befell Icelake is affecting Tigerlake.
Disable the read-only support as clearly it was not fixed.

Testcase: igt/i915_selftests/live_gem_context
References: 3936867dbc1e ("drm/i915: Disable read only ppgtt support for gen11")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911125717.28997-1-chris@chris-wilson.co.uk

drm/i915: Remove pointless planes_changed=true assignment

i915 doesn't use the crtc_state->plane_changed flag for anything,
so setting it is pointless.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708125325.16576-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Use a high priority wq for nonblocking plane updates

system_unbound_wq can't keep up sometimes and we get dropped frames.
Switch to a high priority variant.

Reported-by: Heinrich Fink <heinrich.fink@daqri.com>
Tested-by: Heinrich Fink <heinrich.fink@daqri.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910121347.22958-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/display: Add glk_cdclk_table

Commit 736da8112fee ("drm/i915: Use literal representation of cdclk
tables") pushed the cdclk logic into tables, adding glk_cdclk_table but
not using yet:

drivers/gpu/drm/i915/display/intel_cdclk.c:1173:38: error: ‘glk_cdclk_table’ defined but not used [-Werror=unused-const-variable=]

Fixes: 736da8112fee ("drm/i915: Use literal representation of cdclk tables")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911074727.32585-1-chris@chris-wilson.co.uk

drm/i915: Make i915_vma.flags atomic_t for mutex reduction

In preparation for reducing struct_mutex stranglehold around the vm,
make the vma.flags atomic so that we can acquire a pin on the vma
atomically before deciding if we need to take the mutex.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911090243.16786-1-chris@chris-wilson.co.uk

drm/i915: Whitelist COMMON_SLICE_CHICKEN2

This allows userspace to use "legacy" mode for push constants, where
they are committed at 3DPRIMITIVE or flush time, rather than being
committed at 3DSTATE_BINDING_TABLE_POINTERS_XS time.  Gen6-8 and Gen11
both use the "legacy" behavior - only Gen9 works in the "new" way.

Conflating push constants with binding tables is painful for userspace,
we would like to be able to avoid doing so.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911014801.26821-1-kenneth@whitecape.org

drm/i915: Make shrink/unshrink be atomic

Add an atomic counter and always take the spinlock around the pin/unpin
events, so that we can perform the list manipulation concurrently.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910212204.17190-1-chris@chris-wilson.co.uk

drm/i915: Make pm_notify take intel_gt

These notifications operate on intel_gt so make the code take what it
needs.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-5-tvrtko.ursulin@linux.intel.com

drm/i915: Avoid round-trip via i915 in intel_gt_park

Both in the container_of and getting to gt->awake there is no need to go
via i915 since both the wakeref and awake are members of gt.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-4-tvrtko.ursulin@linux.intel.com

drm/i915: Make wait_for_timelines take struct intel_gt

Timelines live in struct intel_gt so make wait_for_timelines take
exactly what it needs.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-3-tvrtko.ursulin@linux.intel.com

drm/i915: Move GT init to intel_gt.c

Code in i915_gem_init_hw is all about GT init so move it to intel_gt.c
renaming to intel_gt_init_hw.

Existing intel_gt_init_hw is renamed to intel_gt_init_hw_early since it
is currently called from driver probe.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910143823.10686-2-tvrtko.ursulin@linux.intel.com

drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk

The BXT and CNL functions were already basically identical, whereas
ICL's function tried to do its own sanitization rather than calling
bxt_sanitize_cdclk.

This should actually fix a bug in our ICL initialization where it would
consider the /2 CD2X divider invalid and force an unnecessary
sanitization (we now have valid clock frequencies that use this
divider).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-9-matthew.d.roper@intel.com

drm/i915: Enhance cdclk sanitization

When reading out the BIOS-programmed cdclk state, let's make sure that
the cdclk value is on the valid list for the platform, ensure that the
VCO matches the cdclk, and ensure that the CD2X divider was set
properly.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-8-matthew.d.roper@intel.com

drm/i915: Add calc_voltage_level display vfunc

With all of the cdclk function consolidation, we can cut down on a lot
of platform if/else logic by creating a vfunc that's initialized at
startup.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-7-matthew.d.roper@intel.com

drm/i915: Consolidate {bxt,cnl,icl}_uninit_cdclk

The uninitialize flow is the same on all of these platforms, aside from
calculating a different frequency level.

v2: Reverse platform conditional order for consistency.  (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-6-matthew.d.roper@intel.com

drm/i915: Kill cnl_sanitize_cdclk()

The CNL variant of this function is identical to the BXT variant aside
from not needing to handle SSA precharge.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-5-matthew.d.roper@intel.com

drm/i915: Combine bxt_set_cdclk and cnl_set_cdclk

We'd previously combined ICL/TGL logic into the cnl_set_cdclk function,
but BXT is pretty similar as well.  Roll the cnl/icl/tgl logic back into
the bxt function; the only things we really need to handle separately
are punit notification and calling different functions to enable/disable
the cdclk PLL.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910154252.30503-4-matthew.d.roper@intel.com

drm/i915: Use literal representation of cdclk tables

The bspec lays out legal cdclk frequencies, PLL ratios, and CD2X
dividers in an easy-to-read table for most recent platforms.  We've been
translating the data from that table into platform-specific code logic,
but it's easy to overlook an area we need to update when adding new
cdclk values or enabling new platforms.  Let's just add a form of the
bspec table to the code and then adjust our functions to pull what they
need directly out of the table.

v2: Fix comparison when finding best cdclk.

v3: Another logic fix for calc_cdclk.

v4:
 - Use named initializers for cdclk tables. (Ville)
 - Include refclk as a field in the table instead of adding all three
   ratios for each entry. (Ville)
 - Terminate tables with an empty entry to avoid needing to store the
   table size. (Ville)
 - Don't try so hard to return reasonable values from our lookup
   functions if we get impossible inputs; just WARN and return 0.
   (Ville)
 - Keep a bxt_ prefix on the lookup functions since they're still only
   used on bxt+ for now.  We can rename them later if we extend this
   table-based approach back to older platforms.  (Ville)

v5:
 - Fix cnl table's ratios for 24mhz refclk. (Ville)
 - Don't miss the named initializers on the cnl table. (Ville)
 - Represent refclk in table as u16 rather than u32. (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910161506.7158-1-matthew.d.roper@intel.com

drm/i915: Consolidate bxt/cnl/icl cdclk readout

Aside from a few minor register changes and some different clock values,
cdclk design hasn't changed much since gen9lp.  Let's consolidate the
handlers for bxt, cnl, and icl to keep the codeflow consistent.

Also, while we're at it, s/bxt_de_pll_update/bxt_de_pll_readout/ since
"update" makes me think we should be writing to hardware rather than
reading from it.

v2:
 - Fix icl_calc_voltage_level() limits.  (Ville)
 - Use CNL_CDCLK_PLL_RATIO_MASK rather than BXT_DE_PLL_RATIO_MASK on
   gen10+ to avoid confusion.  (Ville)

v3:
 - Also fix ehl_calc_voltage_level() limits.  (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910160520.6587-1-matthew.d.roper@intel.com

drm/i915/tgl: Disable rc6 for debugging

Empirical evidence from CI tells us that our rc6 setup for Tigerlake is
off. Disable rc6 on tgl temporary so that we gain CI coverage as we
prepare a fix. It also appears that the BIOS on our tgl leaves rc6
enabled, so we have to explicitly disable it on init.

References: https://bugs.freedesktop.org/show_bug.cgi?id=111593
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910161657.23037-1-chris@chris-wilson.co.uk

drm/i915/selftests: Tighten the timeout testing for partial mmaps

Currently, if there is time remaining before the start of the loop, we
do one full iteration over many possible different chunks within the
object. A full loop may take 50+s (depending on speed of indirect GTT
mmapings) and we try separately with LINEAR, X and Y -- at which point
igt times out. If we check more frequently, we will interrupt the loop
upon our timeout -- it is hard to argue for as this significantly reduces
the test coverage as we dramatically reduce the runtime. In practical
terms, the coverage we should prioritise is in using different fence
setups, forcing verification of the tile row computations over the
current preference of checking extracting chunks. Though the exhaustive
search is great given an infinite timeout, to improve our current
coverage, we also add a randomised smoketest of partial mmaps. So let's
do both, add a randomised smoketest of partial tiling chunks and the
exhaustive (though time limited) search for failures.

Even in adding another subtest, we should shave 100s off BAT! (With,
hopefully, no loss in coverage, at least over multiple runs.)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910121009.13431-1-chris@chris-wilson.co.uk

drm/i915/selftests: Take runtime wakeref for igt_ggtt_lowlevel

Being a "low-level" test, we opt to bypass the normal bind/unbind hooks
for the lower level insert_entries/clear_range. For ggtt, the
bind/unbind hooks provide the runtime wakeref and so we must also handle
this in exercising the low level hooks.

<4> [538.151672] RPM raw-wakeref not held
<4> [538.151825] WARNING: CPU: 0 PID: 11 at ./drivers/gpu/drm/i915/intel_runtime_pm.h:107 fwtable_read32+0x1be/0x300 [i915]
<4> [538.151830] Modules linked in: i915(+) amdgpu gpu_sched ttm vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic mei_hdcp btusb btrtl btbcm x86_pkg_temp_thermal coretemp btintel crct10dif_pclmul bluetooth crc32_pclmul snd_intel_nhlt snd_hda_codec ecdh_generic ghash_clmulni_intel ecc snd_hwdep snd_hda_core lpc_ich r8169 realtek snd_pcm mei_me mei prime_numbers pinctrl_broxton pinctrl_intel [last unloaded: i915]
<4> [538.151861] CPU: 0 PID: 11 Comm: migration/0 Tainted: G     U            5.3.0-rc7-CI-Trybot_4938+ #1
<4> [538.151864] Hardware name: Intel corporation NUC6CAYS/NUC6CAYB, BIOS AYAPLCEL.86A.0056.2018.0926.1100 09/26/2018
<4> [538.151960] RIP: 0010:fwtable_read32+0x1be/0x300 [i915]
<4> [538.151965] Code: e8 e7 f9 5f e0 e9 0b ff ff ff 80 3d d5 8d 26 00 00 0f 85 81 fe ff ff 48 c7 c7 ef 01 bd a0 c6 05 c1 8d 26 00 01 e8 b2 e4 6a e0 <0f> 0b e9 67 fe ff ff 80 3d ad 8d 26 00 00 0f 85 65 fe ff ff 48 c7
<4> [538.151969] RSP: 0018:ffffc9000007be10 EFLAGS: 00010086
<4> [538.151972] RAX: 0000000000000000 RBX: ffff88826be10d50 RCX: 0000000000000002
<4> [538.151975] RDX: 0000000080000002 RSI: 0000000000000000 RDI: 00000000ffffffff
<4> [538.151978] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
<4> [538.151981] R10: 0000000000000000 R11: ffffc9000007bcb0 R12: 0000000000101008
<4> [538.151984] R13: 0000000000000000 R14: ffffc9000036f638 R15: 0000000000000002
<4> [538.151987] FS:  0000000000000000(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
<4> [538.151990] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [538.151993] CR2: 00007fd48e7052f8 CR3: 0000000005210000 CR4: 00000000003406f0
<4> [538.151995] Call Trace:
<4> [538.152106]  bxt_vtd_ggtt_clear_range__cb+0x38/0x40 [i915]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-2-chris@chris-wilson.co.uk

drm/i915: Perform GGTT restore much earlier during resume

As soon as we re-enable the various functions within the HW, they may go
off and read data via a GGTT offset. Hence, if we have not yet restored
the GGTT PTE before then, they may read and even *write* random locations
in memory.

Detected by DMAR faults during resume.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Martin Peres <martin.peres@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909110011.8958-4-chris@chris-wilson.co.uk

drm/i915/ringbuffer: Flush writes before RING_TAIL update

Be paranoid and make sure we flush any and all writes out of the WCB
before performing the UC mmio to update the RING_TAIL. (An UC write
should itself be enough to do the flush, hence the paranoia here.) Quite
infrequently, we see problems where the GPU seems to overshoot the
RING_TAIL and so executes garbage, hence the speculation.

References: https://bugs.freedesktop.org/show_bug.cgi?id=111598
References: https://bugs.freedesktop.org/show_bug.cgi?id=111417
References: https://bugs.freedesktop.org/show_bug.cgi?id=111034
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909113018.13300-1-chris@chris-wilson.co.uk

drm/i915/execlists: Ignore lost completion events

Icelake hit an issue where it missed reporting a completion event and
instead jumped straight to a idle->active event (skipping over the
active->idle and not even hitting the lite-restore preemption).

661497511us : process_csb: rcs0 cs-irq head=11, tail=0
661497512us : process_csb: rcs0 csb[0]: status=0x10008002:0x00000020 [lite-restore]
661497512us : trace_ports: rcs0: preempted { 28cc8:11052, 0:0 }
661497513us : trace_ports: rcs0: promote { 28cc8:11054, 0:0 }
661497514us : __i915_request_submit: rcs0 fence 28cc8:11056, current 11052
661497514us : __execlists_submission_tasklet: rcs0: queue_priority_hint:-2147483648, submit:yes
661497515us : trace_ports: rcs0: submit { 28cc8:11056, 0:0 }
661497530us : process_csb: rcs0 cs-irq head=0, tail=1
661497530us : process_csb: rcs0 csb[1]: status=0x10008002:0x00000020 [lite-restore]
661497531us : trace_ports: rcs0: preempted { 28cc8:11054!, 0:0 }
661497535us : trace_ports: rcs0: promote { 28cc8:11056, 0:0 }
661497540us : __i915_request_submit: rcs0 fence 28cc8:11058, current 11054
661497544us : __execlists_submission_tasklet: rcs0: queue_priority_hint:-2147483648, submit:yes
661497545us : trace_ports: rcs0: submit { 28cc8:11058, 0:0 }
661497553us : process_csb: rcs0 cs-irq head=1, tail=2
661497553us : process_csb: rcs0 csb[2]: status=0x10000001:0x00000000 [idle->active]
661497574us : process_csb: process_csb:1538 GEM_BUG_ON(*execlists->active)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190907084334.28952-1-chris@chris-wilson.co.uk

drm/i915/display: Extract chv_read_luts()

For cherryview, add hw read out to create hw blob of gamma
lut values.

Review comments from previous series:
https://patchwork.freedesktop.org/patch/328252

v4: -No need to initialize *blob [Jani]
    -Removed right shifts [Jani]
    -Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
     function [Ville]
    -Renamed function cherryview_get_color_config() to chv_read_luts()
    -Renamed cherryview_get_gamma_config() to chv_read_cgm_gamma_lut()
     [Ville]
v9: -80 character limit [Uma]
    -Made read func para as const [Ville, Uma]
    -Renamed chv_read_cgm_gamma_lut() to chv_read_cgm_gamma_lut()
     [Ville, Uma]

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-4-git-send-email-swati2.sharma@intel.com

drm/i915/display: Extract i965_read_luts()

For i965, add hw read out to create hw blob of gamma
lut values.

Review comments from old series:
https://patchwork.freedesktop.org/series/58039/

v4:  -No need to initialize *blob [Jani]
     -Removed right shifts [Jani]
     -Dropped dev local var [Jani]
v5:  -Returned blob instead of assigning it internally
      within the function [Ville]
     -Renamed i965_get_color_config() to i965_read_lut() [Ville]
     -Renamed i965_get_gamma_config_10p6() to i965_read_gamma_lut_10p6()
      [Ville]
v9:  -Typo and 80 character limit [Uma]
     -Made read func para as const [Ville, Uma]
     -Renamed i965_read_gamma_lut_10p6() to i965_read_lut_10p6() [Ville, Uma]
v10: -Swapped ldw and udw while creating hw blob [Jani]
     -Added last index rgb lut value from PIPEGCMAX to h/w blob [Jani]

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-3-git-send-email-swati2.sharma@intel.com

drm/i915/display: Add gamma precision function for CHV

intel_color_get_gamma_bit_precision() is extended for
cherryview by adding chv_gamma_precision(), i965 will use existing
i9xx_gamma_precision() func only.

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1568030503-26747-2-git-send-email-swati2.sharma@intel.com

drm/i915/execlists: Clear STOP_RING bit on reset

During reset, we try to ensure no forward progress of the CS prior to
the reset by setting the STOP_RING bit in RING_MI_MODE. Since gen9, this
register is context saved and do we end up in the odd situation where we
save the STOP_RING bit and so try to stop the engine again immediately
upon resume. This is quite unexpected and causes us to complain about an
early CS completion event!

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111514
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190910080208.4223-1-chris@chris-wilson.co.uk

drm/i915: include GTT page-size info in error state

It might prove useful in the future to know if the vma is utilising
huge-GTT-pages. Related to this is the GTT cache, where there is some HW
"quirkiness" where it must be disabled if using 2M pages, so include
that for good measure.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909171646.22090-1-matthew.auld@intel.com

drm/i915: cleanup cache-coloring

Try to tidy up the cache-coloring such that we rid the code of any
mm.color_adjust assumptions, this should hopefully make it more obvious
in the code when we need to actually use the cache-level as the color,
and as a bonus should make adding a different color-scheme simpler.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-3-matthew.auld@intel.com

drm/i915: s/i915_gtt_color_adjust/i915_ggtt_color_adjust

Make it clear that the color adjust callback applies to the ggtt.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-2-matthew.auld@intel.com

drm/i915: export color_differs

Export color_differs so that we can use it elsewhere.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190909124052.22900-1-matthew.auld@intel.com

drm/i915/execlists: Remove incorrect BUG_ON for schedule-out

As we may unwind incomplete requests (for preemption) prior to
processing the CSB and the schedule-out events, we may update rq->engine
(resetting it to point back to the parent virtual engine) prior to
calling execlists_schedule_out(), invalidating the assertion that the
request still points to the inflight engine. (The likelihood of this is
increased if the CSB interrupt processing is pushed to the ksoftirqd for
being too slow and direct submission overtakes it.)

Tvrtko summarised it as:
"So unwind from direct submission resets rq->engine and races with
process_csb from the tasklet which notices request has actually
completed."

Reported-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Fixes: df403069029d ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190907105046.19934-1-chris@chris-wilson.co.uk

drm/i915/buddy: add missing call to i915_global_register

We are meant to register the kmem cache at init, such the supplied exit
and shrink hooks can be called.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905072921.7979-1-matthew.auld@intel.com

drm/i915: Hook up GT power management

Refactor the GT power management interface to work through the GT now
that it is under the control of gt/

Based on a patch by Chris Wilson.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905111403.10071-1-andi.shyti@intel.com

drm/i915/tgl: Register state context definition for Gen12

Gen12 has subtle changes in the reg state context offsets (some fields
are gone, some are in a different location), compared to previous Gens.

The simplest approach seems to be keeping Gen12 (and future platform)
changes apart from the previous gens, while keeping the registers that
are contiguous in functions we can reuse.

v2: alias, virtual engine, rpcs, prune unused regs
v3: use engine base (Daniele), take ctx_bb for all

Bspec: 46255
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Tested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
[ickle: Tweaked the GEM_WARN_ON after settling on a compromise with
Daniele]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906122314.2146-2-mika.kuoppala@linux.intel.com

drm/i915: Use engine relative LRIs on context setup

Daniele pointed out that relative mmio works differently in
on context restore. Instead of adding the engine mmio base to offset,
it masks out the base and adds bits [12:2] to current engine base.

This should allow us to construct context register state to be
applicable to all instances, including virtual. And avoid the trouble
of updating the registers on virtual instances when submitting work.

v2: only enable for gen12 for now (Mika)
v3: make enabling readable (Chris)

Bspec: 20206
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190906134957.25909-1-mika.kuoppala@linux.intel.com

drm/i915/tgl: Use refclk/2 as bypass frequency

Unlike gen11, which always ran at 50MHz when the cdclk PLL was disabled,
TGL runs at refclk/2.  The 50MHz croclk/2 is only used by hardware
during some power state transitions.

Bspec: 49201
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905181337.23727-1-matthew.d.roper@intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: add immutable zpos plane properties

This adds basic immutable support for the zpos property. The zpos increases
from bottom to top: primary, sprites, cursor.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[contact@emersion.fr: adapted for latest drm-tip]
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/YSH9PasoADJJdNJCSdI4m55ankIBsCaoSgkw-NQ5dlruCAxc8J-SQwVl5n3ddSAMDLTdbdyQvkONmtbjkUU-TQk5VIu1p-aZRO1OjjuSxjY=@emersion.fr
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Protect debugfs per_file_stats with RCU lock

If we make sure we grab a strong reference to each object as we dump it,
we can reduce the locks outside of our iterators to an rcu_read_lock.

This should prevent errors like:
[ 2138.371911] BUG: KASAN: use-after-free in per_file_stats+0x43/0x380 [i915]
[ 2138.371924] Read of size 8 at addr ffff888223651000 by task cat/8293

[ 2138.371947] CPU: 0 PID: 8293 Comm: cat Not tainted 5.3.0-rc6-CI-Custom_4352+ #1
[ 2138.371953] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.40 07/14/2017
[ 2138.371959] Call Trace:
[ 2138.371974]  dump_stack+0x7c/0xbb
[ 2138.372099]  ? per_file_stats+0x43/0x380 [i915]
[ 2138.372108]  print_address_description+0x73/0x3a0
[ 2138.372231]  ? per_file_stats+0x43/0x380 [i915]
[ 2138.372352]  ? per_file_stats+0x43/0x380 [i915]
[ 2138.372362]  __kasan_report+0x14e/0x192
[ 2138.372489]  ? per_file_stats+0x43/0x380 [i915]
[ 2138.372502]  kasan_report+0xe/0x20
[ 2138.372625]  per_file_stats+0x43/0x380 [i915]
[ 2138.372751]  ? i915_panel_show+0x110/0x110 [i915]
[ 2138.372761]  idr_for_each+0xa7/0x160
[ 2138.372773]  ? idr_get_next_ul+0x110/0x110
[ 2138.372782]  ? do_raw_spin_lock+0x10a/0x1d0
[ 2138.372923]  print_context_stats+0x264/0x510 [i915]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903062133.27360-1-chris@chris-wilson.co.uk

drm/i915/mst: Do not hardcoded the crtcs that encoder can connect

Tiger Lake has up to 4 pipes so the mask would need to be 0xf instead of
0x7. Do not hardcode the mask so it allows the fake MST encoders to
connect to all pipes no matter how many the platform has.

Iterating over all pipes to keep consistent with intel_ddi_init().

Initialy this patch was replaced by commit 4eaceea3a00f ("drm/i915:
Fix DP-MST crtc_mask") but userspace it not correctly using
encoder.possible_crtcs and it was reverted by
commit e838bfa8e170 ("Revert "drm/i915: Fix DP-MST crtc_mask"")

Userspace should be fixed but it might take a while, so bringing this
patch back for now.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-2-jose.souza@intel.com

drm/i915: Apply FBC WA for TGL too

WA 1409120013 is also valid for TGL, so lets check for ">= 11".

BSpec: 52890

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904230241.20638-1-jose.souza@intel.com

drm/i915/tgl: add gen12 to stolen initialization

Add case for gen == 12 and add MISSING_CASE() for future gens. We were
already handling gen12 as the default, so this doesn't change the
current behavior.

BSpec: 19481 and 44980

Cc: CQ Tang <cq.tang@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-7-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/tgl: disable SAGV temporarily

SAGV is not currently working for Tiger Lake. We better disable it until
the implementation is stabilized and we can enable it.

HSDES: 1409542895 2208191909

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-6-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/tgl: move DP_TP_* to transcoder

Gen 12 onwards moves the DP_TP_* registers to be transcoder-based rather
than port-based. This adds the new register addresses and changes all
the callers to use the register saved in intel_dp->regs.*. This is
filled out when preparing to enable the port so we take into account if
we should use the transcoder or the port.

v2: reimplement by stashing the registers we want to access under
intel_dp->reg. Now they are initialized when enabling the port.
Ville suggested to store the transcoder to be used exclusively
by TGL+. After implementing I thought just storing the register directly
made it cleaner.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-5-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: protect access to DP_TP_* on non-dp

DP_TP_{CTL,STATUS} should only be programmed when the encoder is intel_dp.
Checking its current usages intel_disable_ddi_buf() is the only
offender, with other places being protected by checks like
pipe_config->fec_enable that is only set by intel_dp.

v3 (José):
- Using intel_crtc_has_dp_encoder() instead of intel_encoder_is_dp()
(Ville)

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-4-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/tgl: Access the right register when handling PSR interruptions

For older gens PSR IIR and IMR have fixed addresses. From TGL onwards those
registers moved to each transcoder offset. The bits for the registers
are defined without an offset per transcoder as right now we have one
register per transcoder. So add a fake "trans_shift" when calculating
the bits offsets: it will be 0 for gen12+ and psr.transcoder otherwise.

v2 (Lucas): change the implementation to use trans_shift instead of
getting each bit value with a different macro

Cc: Imre Deak <imre.deak@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-3-jose.souza@intel.com

drm/i915/psr: Only handle interruptions of the transcoder in use

It was enabling and checking PSR interruptions in every transcoder
while it should keep the interruptions on the non-used transcoders
masked.

While doing this it gives us trouble on Tiger Lake if we are
reading/writing to registers of disabled transcoders since from gen12
onwards the registers are relative to the transcoder. Instead of forcing
them ON to access those registers, just avoid the accesses as they are
not needed.

v2 (Lucas):
  - Explain why we can't keep accessing all transcoders
  - Remove TODO about extending the irq handling to multiple instances:
    when/if implementing multiple instances it's pretty clear by the
    singleton psr that it needs to be extended
  - Fix intel_psr_debug_set() calling psr_irq_control() with
    psr.transcoder not set yet (from Imre). Now we only set the debug
    register right away if psr is already enabled. Otherwise we just
    record the value to be set when enabling the source.
  - Do not depend on the value of TRANSCODER_A. Just be relative to it
    (from Imre)
  - handle psr error last so we don't schedule the work before handling
    the other flags

v3:
  - Adding a warning about setting reserverd bits on EDP_PSR_IMR

Cc: Imre Deak <imre.deak@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904213419.27547-2-jose.souza@intel.com

drm/i915: disable set/get_tiling ioctl on gen12+

The cpu (de)tiler hw is gone, this stopped being useful. Plus it never
supported any of the fancy new tiling formats, which means userspace
also stopped using the magic side-channel this provides.

This would totally break a lot of the igts, but they're already broken
for the same reasons as userspace on gen12 would be.

v2: Look at ggtt->num_fences instead, that also avoids the need for a
comment (Chris). This also means that gen12 support really needs to
make sure num_fences is set to 0. There is a patch for that, but it
checks for HAS_MAPPABLE_APERTURE, which I'm not sure is the right
thing really. Adding relevant people.

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820195451.15671-1-daniel.vetter@ffwll.ch

Revert "drm/i915: Fix DP-MST crtc_mask"

This reverts commit 4eaceea3a00f8e936a7f48dcd0c975a57f88930f.

Several userspace clients (modesetting ddx and mutter+wayland at least)
handle encoder.possible_crtcs incorrectly. What they essentially do is
the following:

possible_crtcs = ~0;
for_each_possible_encoder(connector)
possible_crtcs &= encoder->possible_crtcs;

Ie. they calculate the intersection of the possible_crtcs
for the connector when they really should be calculating the
union instead.

In our case each MST encoder now has just one unique bit set,
and so the intersection is always zero. The end result is that
MST connectors can't be lit up because no crtc can be found to
drive them.

I've submitted a fix for the modesetting ddx [1], and complained
on #wayland about mutter, so hopefully the situation will improve
in the future. In the meantime we have regression, and so must go
back to the old way of misconfiguring possible_crtcs in the kernel.

[1] https://gitlab.freedesktop.org/xorg/xserver/merge_requests/277

Cc: Jonas Ådahl <jadahl@gmail.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111507
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903154018.26357-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+

This bit was fliped on for "syncing dependencies between camera and
graphics". BSpec has no recollection why, and it is causing
unrecoverable GPU hangs with Vulkan compute workloads.

From BSpec, setting bit5 to 0 enables relaxed padding requirements for
buffers, 1D and 2D non-array, non-MSAA, non-mip-mapped linear surfaces;
and *must* be set to 0h on skl+ to ensure "Out of Bounds" case is
suppressed.

Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110998
Fixes: 8424171e135c ("drm/i915/gen9: h/w w/a: syncing dependencies between camera and graphics")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: denys.kostin@globallogic.com
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.1+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904100707.7377-1-chris@chris-wilson.co.uk

drm/i915/display: Extract glk_read_luts()

For glk, add hw read out to create hw blob of gamma
lut values.

v4: -No need to initialize *blob [Jani]
    -Removed right shifts [Jani]
    -Dropped dev local var [Jani]
v5: -Returned blob instead of assigning it internally within the
     function [Ville]
    -Renamed glk_get_color_config() to glk_read_luts() [Ville]
    -Added degamma validation [Ville]
v9: -80 character limit [Uma]
    -Made read func para as const [Ville, Uma]

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1567538578-4489-8-git-send-email-swati2.sharma@intel.com