* eval.c (evaluate_subexp_standard): Use value_subscripted_rvalue for
multi_f77_subscript to support values from registers.
* valarith.c (value_subscripted_rvalue): Remove prototype and static.
* value.h (value_subscripted_rvalue): Add prototype.

* f-typeprint.c (f_type_print_base): Add support for TYPE_CODE_UNION.
Fix output.
* f-valprint.c (f_val_print): Likewise.

* gdb.texinfo (Fortran Operators): Describe '%' operator.

* archive.c (_bfd_write_archive_contents): Fix incorrect use of
ARFMAG.

daily update

*** empty log message ***

merge from gcc

* dwarf2read.c (zlib_decompress_section): Define abfd in the
!HAVE_ZLIB_H case.

* linux-ppc-low.c (ppc_arch_setup): Reset ppc_hwcap after the
initial call to init_register_ppc64.

bfd/
* elfxx-mips.c (_bfd_mips_vxworks_adjust_dynamic_symbol): Don't
set the value of undefined symbols in shared objects.
(_bfd_mips_vxworks_finish_dynamic_symbol): Clear value for
undefined symbols unless pointer equality is needed.
ld/testsuite/
* ld-vxworks/plt-mips1.s: New.
* ld-vxworks/plt-mips1.d: New.

* configure.srv (powerpc64-*-linux*, powerpc-*-linux*): Merge into single
powerpc*-*-linux* case.
(s390-*-linux*, s390x-*-linux*): Merge into single s390*-*-linux* case.

* symfile.c (syms_from_objfile): Don't warn if lowest loadable
section is not a code section.

*** empty log message ***

daily update

* gdb.texinfo (Set Breaks): Mention that multiple location
breakpoints need line number info.  Add index entries.

  * NEWS: Add information on compressed debug sections.
      * doc/gdb.texinfo (Requirements): Add an optional requirement
      on zlib.
      * doc/gdbint.texinfo (Debugging File Formats): Add new
      subsection for Compressed DWARF 2.

*** empty log message ***

daily update

* version.cc (version_string): Bump to 1.6.

* testsuite/Makefile.am (many_sections_r_test): New target.
(many_sections_r_test_SOURCES): Remove.
(many_sections_r_test_DEPENDENCIES): Remove.
(many_sections_r_test_LDFLAGS): Remove.
(many_sections_r_test_LDADD): Remove.

* object.cc (Sized_relobj::do_add_symbols): Always pass
local_symbol_count_ to add_from_relobj.

* testsuite/Makefile.am (many_sections_check.h): Only check one in
every thousand variables.
* testsuite/Makefile.in: Rebuild.

* elfcpp_file.h (class Elf_file): Add large_shndx_offset_ field.
(Elf_file::large_shndx_offset): New function.
(Elf_file::construct): Initialize large_shndx_offset_.
(Elf_File::initialize_shnum): If necessary, adjust shstrndx_ and
set large_shndx_offset_.

* object.cc (Xindex::initialize_symtab_xindex): New function.
(Xindex::read_symtab_xindex): New function.
(Xindex::sym_xindex_to_shndx): New function.
(Sized_relobj::find_symtab): Pick up SHT_SYMTAB_SHNDX section if
available.
(Sized_relobj::do_initialize_xindex): New function.
(Sized_relobj::do_read_symbols): Adjust section links.
(Sized_relobj::symbol_section_and_value): Add is_ordinary
parameter.  Change all callers.
(Sized_relobj::include_section_group): Adjust section links and
symbol section indexes.
(Sized_relobj::do_layout): Adjust section links.
(Sized_relobj::do_count_local_symbols): Adjust section links and
symbol section indexes.
(Sized_relobj::do_finalize_local_symbols): Distinguish between
ordinary and special symbols.
(Sized_relobj::write_local_symbols): Add symtab_xindex and
dynsym_xindex parameters.  Change all callers.  Adjust section
links.  Use SHN_XINDEX when needed.
(Sized_relobj::get_symbol_location_info): Adjust section links.
Don't get fooled by special symbols.
* object.h (class Xindex): Define.
(class Object): Add xindex_ parameter.  Declare virtual functoin
do_initialize_xindex.
(Object::adjust_sym_shndx): New function.
(Object::set_xindex): New protected function.
(class Symbol_value): Add is_ordinary_shndx_ field.
(Symbol_value::Symbol_value): Initialize is_ordinary_shndx_.
(Symbol_value::value): Assert ordinary section.
(Symbol_value::initialize_input_to_output_map): Likewise.
(Symbol_value::set_input_shndx): Add is_ordinary parameter.
Change all callers.
(Symbol_value::input_shndx): Add is_ordinary parameter.  Change
all callers.
(class Sized_relobj): Update declarations.
(Sized_relobj::local_symbol_input_shndx): Add is_ordinary
parameter.  Change all callers.
(Sized_relobj::adjust_shndx): New function.
* dynobj.cc (Sized_dynobj::Sized_dynobj): Initialize dynsym_shndx_
field.
(Sized_dynobj::find_dynsym_sections): Remove pdynsym_shndx
parameter.  Change all callers.  Pick up SHT_DYNSYM_SHNDX section
for SHT_DYNSYM section if available.  Set dynsym_shndx_ field.
(Sized_dynobj::read_dynsym_section): Adjust section links.
(Sized_dynobj::read_dynamic): Likewise.
(Sized_dynobj::do_read_symbols): Use dynsym_shndx_ field.  Adjust
section links.
(Sized_dynobj::do_initialize_xindex): New function.
* dynobj.h (class Sized_dynobj): Add dynsym_shndx_ field.  Declare
do_initialize_xindex.
(Sized_dynobj::adjust_shndx): New function.
* layout.cc (Layout::Layout): Initialize symtab_xindex_ and
dynsym_xindex_ fields.
(Layout::finalize): Add a call to set_section_indexes before
creating the symtab sections.
(Layout::set_section_indexes): Don't do anything if the section
already has a section index.
(Layout::create_symtab_sections): Add shnum parameter.  Change
caller.  Create .symtab_shndx section if needed.
(Layout::create_shdrs): Add shstrtab_section parameter.  Change
caller.
(Layout::allocated_output_section_count): New function.
(Layout::create_dynamic_symtab): Create .dynsym_shndx section if
needed.
* layout.h (class Layout): Add symtab_xindex_ and dynsym_xindex_
fields.  Update declarations.
(Layout::symtab_xindex): New function.
(Layout::dynsym_xindex): New function.
(class Write_symbols_task): Add layout_ field.
(Write_symbols_task::Write_symbols_task): Add layout parameter.
Change caller.
* output.cc (Output_section_headers::Output_section_headers): Add
shstrtab_section parameter.  Change all callers.
(Output_section_headers::do_sized_write): Store overflow values
for section count and section string table section index in
section header zero.
(Output_file_header::do_sized_write): Check for overflow of
section count and section string table section index.
(Output_symtab_xindex::do_write): New function.
(Output_symtab_xindex::endian_do_write): New function.
* output.h (class Output_section_headers): Add shstrtab_section_.
Update declarations.
(class Output_symtab_xindex): Define.
(Output_section::has_out_shndx): New function.
* symtab.cc (Symbol::init_fields): Initialize is_ordinary_shndx_
field.
(Symbol::init_base): Add st_shndx and is_ordinary parameters.
Change all callers.
(Sized_symbol::init): Likewise.
(Symbol::output_section): Check for ordinary symbol.
(Symbol_table::add_from_object): Remove orig_sym parameter.  Add
st_shndx, is_ordinary, and orig_st_shndx parameters.  Change all
callers.
(Symbol_table::add_from_relobj): Add symndx_offset parameter.
Change all callers.  Simplify handling of symbols from sections
not included in the link.
(Symbol_table::add_from_dynobj): Handle ordinary symbol
distinction.
(Weak_alias_sorter::operator()): Assert that symbols are
ordinary.
(Symbol_table::sized_finalize_symbol): Handle ordinary symbol
distinction.
(Symbol_table::write_globals): Add symtab_xindex and dynsym_xindex
parameters.  Change all callers.
(Symbol_table::sized_write_globals): Likewise.  Handle ordinary
symbol distinction.  Use SHN_XINDEX when needed.
(Symbol_table::write_section_symbol): Add symtab_xindex
parameter.  Change all callers.
(Symbol_table::sized_write_section_symbol): Likewise.  Use
SHN_XINDEX when needed.
* symtab.h (class Symbol): Add is_ordinary_shndx_ field.  Update
declarations.
(Symbol::shndx): Add is_ordinary parameter.  Change all callers.
(Symbol::is_defined): Check is_ordinary.
(Symbol::is_undefined, Symbol::is_weak_undefined): Likewise.
(Symbol::is_absolute, Symbol::is_common): Likewise.
(class Sized_symbol): Update declarations.
(class Symbol_table): Update declarations.
* resolve.cc (Symbol::override_base): Add st_shndx and is_ordinary
parameters.  Change all callers.
(Sized_symbol::override): Likewise.
(Symbol_table::override): Likewise.
(symbol_to_bits): Add is_ordinary parameter.  Change all callers.
(Symbol_table::resolve): Remove orig_sym parameter.  Add st_shndx,
is_ordinary, and orig_st_shndx parameters.  Change all callers.
* copy-relocs.cc (Copy_relocs::emit_copy_reloc): Require symbol
to be in an ordinary section.
* dwarf_reader.cc (Sized_dwarf_line_info::symbol_section): Add
object and is_ordinary parameters.  Change all callers.
(Sized_dwarf_line_info::read_relocs): Add object parameter.
Change all callers.  Don't add undefined or non-ordinary symbols
to reloc_map_.
(Sized_dwarf_line_info::read_line_mappings): Add object parameter.
Change all callers.
* dwarf_reader.h (class Sized_dwarf_line_info): Update
declarations.
* ehframe.cc (Eh_frame::read_fde): Check for ordinary symbol.
* reloc.cc (Sized_relobj::do_read_relocs): Adjust section links.
(Sized_relobj::relocate_sections): Likewise.
* target-reloc.h (scan_relocs): Adjust section symbol index.
(scan_relocatable_relocs): Likewise.
* i386.cc (Scan::local): Check for ordinary symbols.
* sparc.cc (Scan::local): Likewise.
* x86_64.cc (Scan::local): Likewise.
* testsuite/binary_unittest.cc (Sized_binary_test): Update calls
to symbol_section_and_value.
* testsuite/many_sections_test.cc: New file.
* testsuite/Makefile.am (BUILT_SOURCES): Define.
(check_PROGRAMS): Add many_sections_test.
(many_sections_test_SOURCES): Define.
(many_sections_test_DEPENDENCIES): Define.
(many_sections_test_LDFLAGS): Define.
(BUILT_SOURCES): Add many_sections_define.h.
(many_sections_define.h): New target.
(BUILT_SOURCES): Add many_sections_check.h.
(many_sections_check.h): New target.
(check_PROGRAMS): Add many_sections_r_test.
(many_sections_r_test_SOURCES): Define.
(many_sections_r_test_DEPENDENCIES): Define.
(many_sections_r_test_LDFLAGS): Define.
(many_sections_r_test_LDADD): Define.
(many_sections_r_test.o): New target.
* testsuite/Makefile.in: Rebuild.

* mi/mi-cmd-var.c (varobj_update_one): Print new
value for variable objects that changed type.

* varobj.c (varobj_invalidate): Don't touch floating
varobjs.

* symtab.c: (multiple_symbols_modes, multiple_symbols_ask)
(multiple_symbols_cancel): Remove extra const.
* symtab.h: Likewise.

(linespec.o, mi-interp.o): Add dependencies.

Include interps.h and mi/mi-cmds.h.
(decode_line_2): When using MI, always set all breakpoints in menu.

New extern for top_level_interpreter.

(top_level_interpreter): Rename static variable...
(top_level_interpreter_ptr): ...to this.
(top_level_interpreter): New function.

*** empty log message ***

* configure.ac (AC_SEARCH_LIBS): Add check for zlib.
* config.in, configure: Regenerate.
* dwarf2read.c: Include zlib.h if present.
Modified *_SECTION macros.
(section_is_p): New.
(dwarf2_locate_sections): Use section_is_p instead of strcmp
(dwarf2_resize_section): New.
to determine whether a given section has a given name.
(zlib_decompress_section): New.
(dwarf2_read_section): Read the compressed section if present
in the binary.
* testsuite/gdb.dwarf2/dw2-compressed.S: New file.
* testsuite/gdb.dwarf2/dw2-compressed.exp: New file.
* MAINTAINERS: Added myself to section Write After Approval.

* defs.h (exec_set_section_offsets): Remove prototype.
* exec.c (exec_set_section_offsets): Remove function.

    * gdb.ada/atomic_enum: New test program.
        * gdb.ada/atomic_enum.exp: New testcase.

    * stabsread.c (cleanup_undefined_types_1): Add instance flags check
        in the search for the matching symbol.

*** empty log message ***

daily update

* doc/c-sparc.texi: Add syntax section.

2008-04-18  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
REG and NDS for instructions with immediate operand.

merge from gcc

gas/

2008-04-18  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
FMA.

gas/testsuite/

2008-04-18  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/arch-10.d: Updated.
* gas/i386/avx.d: Likewise.
* gas/i386/avx-intel.d: Likewise.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/x86-64-avx.d: Likewise.
* gas/i386/x86-64-avx-intel.d: Likewise.

opcodes/

2008-04-18  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (OP_VEX_FMA): New.
(OP_EX_VexImmW): Likewise.
(VexFMA): Likewise.
(Vex128FMA): Likewise.
(EXVexImmW): Likewise.
(get_vex_imm8): Likewise.
(OP_EX_VexReg): Likewise.
(vex_i4_done): Renamed to ...
(vex_w_done): This.
(prefix_table): Replace EXVexW with EXVexImmW on vpermil2ps
and vpermil2pd.  Replace Vex/Vex128 with VexFMA/Vex128FMA on
FMA instructions.
(print_insn): Updated.
(OP_EX_VexW): Rewrite to swap register in VEX with EX.
(OP_REG_VexI4): Check invalid high registers.

2008-04-18  Paolo Bonzini  <bonzini@gnu.org>

Sync with gcc:
2008-04-18  Paolo Bonzini  <bonzini@gnu.org>

PR bootstrap/35457
* configure.ac: Include override.m4.
* configure: Regenerate.

2008-04-18  Paolo Bonzini  <bonzini@gnu.org>

        * Makefile.tpl (restrap): Call `make all' using double-colon rules.
        * Makefile.in: Regenerate.

2008-04-11  Eric B. Weddington  <eweddington@cso.atmel.com>

        * configure.ac: Do not build libssp for the AVR.
        * configure: Regenerate.

config:
2008-04-18  Paolo Bonzini  <bonzini@gnu.org>

PR bootstrap/35457

* override.m4: Add this.  Make sure aclocal always picks it.
Add more lenient precious variable check, backported from
autoconf trunk.

   * aix5ppc-core.c: Define macros for the default architecture and
       machine for matching core files.
       (xcoff64_core_p): Set the architecture and machine to the default
       values defined in the macros mentioned above.
       * rs6000-core.c: Define macros to determine whether or not the
       core file header uses the core_dumpxx header format.
       (rs6000coff_core_p): Don't match core files that use the
       core_dumpxx header format.

[patch]: ctor/dtor section must start at alignment of 8 for x86_64-pc-mingw32.

* scripttempl/pep.sc: Align start of symbol __CTOR_LIST__.

* MAINTAINERS: Replace reference to configure.in with reference to configure.ac.

* config/tc-sparc.c (sparc_ip): Recognize %pc22 and %pc10.

 * configure.ac (cr16-*-*): Add case for cr16 target and include gdb
   as nonconfigurable directories list.
 * configure: Regenerate.

* Makefile.in (distclean): Add gstdint.h.

2008-04-17  Marc Khouzam  <marc.khouzam@ericsson.com>

       * breakpoint.c (update_watchpoint): Always reparse
       condition.

daily update

*** empty log message ***

* gdb.opt/Makefile.in: Fix whitespace.

* errors.cc (Errors::info): New function.
(gold_info): New function.
* errors.h (Errors::info): New function.
* gold.h (gold_info): New function.
* object.cc (Input_objects::add_object): Print trace output.
* options.cc (options::parse_set): New function.
(General_options::parse_wrap): Deleted.
(General_options::General_options): Deleted initializer.
* options.h (options::String_set): New typedef.
(options::parse_set): New function.
(DEFINE_set): New macro.
(General_options::wrap): Changed to use DEFINE_set. Changed
callers of any_wrap_symbols and is_wrap_symbol.
(General_options::trace, General_options::trace_symbol):
New options.
(General_options::any_wrap_symbols, General_options::is_wrap_symbol)
(General_options::wrap_symbols_): Deleted.
* symtab.cc (Symbol_table::add_from_object): Print trace output.

    * breakpoint.c (print_one_breakpoint_location): Make sure to print
        the breakpoint address only once.

2008-04-17  Daniel Jacobowitz  <dan@codesourcery.com>

* gdb.threads/linux-dp.exp: Continue after unrecognized lines.

* configure.srv [powerpc64-*-linux*]: Remove powerpc-e500.o from
srv_regobj.  Remove rs6000/powerpc-e500.xml and rs6000/power-spe.xml
from reg_xmlfiles.
* linux-ppc-low.c: Include <elf.h>.
(PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Define.
(ppc_hwcap): New global variable.
(ppc_regmap): Remove __SPE__ #ifdef sections.
(ppc_regmap_e500): New global variable.
(ppc_cannot_store_register): Update __SPE__ special case.
(ppc_get_hwcap): New function.
(ppc_arch_setup): Use it to determine whether inferior supports
AltiVec or SPE registers.  Set the_low_target.regmap if appropriate.
(ppc_fill_vrregset, ppc_store_vrregset): Define unconditionally.
Do not access registers if target does not support AltiVec.
(ppc_fill_evrregset, ppc_store_evrregset): Define unconditionally.
Do not access registers if target does not support SPE.
(target_regsets): Unconditionally include AltiVec and SPE regsets.

2008-04-17  Daniel Jacobowitz  <dan@codesourcery.com>

* linux-low.c (disabled_regsets, num_regsets): New.
(use_regsets_p): Delete.
(linux_wait_for_process): Clear disabled_regsets.
(regsets_fetch_inferior_registers): Check and set it.
(regsets_store_inferior_registers): Likewise.
(linux_fetch_registers, linux_store_registers): Do not use
use_regsets_p.
(initialize_low): Allocate disabled_regsets.

    * rs6000-tdep.c (rs6000_gdbarch_init): Use the BFD architecture,
        rather than a hard-coded architecture, for xcoff executables.

* options.cc (General_options::parse_V): New function.
* options.h: Add entries for -V and -Qy.

* buildsym.c (watch_main_source_file_lossage): New fn.
(end_symtab): Call it.

* gdb.base/hashline1.exp: New testcase.
* gdb.base/hashline2.exp: New testcase.
* gdb.base/hashline2.exp: New testcase.

* source.c (find_and_open_source): Add some comments clarifying
handling of FULLNAME argument. Make static.  Remove pointless
xstrdup/xfree.

gdb/
* inf-loop.c (inferior_event_handler): Also run the intermediate
continuations in the INF_EXEC_COMPLETE case.

gdb/testsuite/
* gdb.base/step-break.exp, gdb.base/step-break.c: New files.

* common.cc (Symbol_table::allocate_commons): Remove options
parameter.  Change caller.
(Symbol_table::do_allocate_commons): Remove options parameter.
Change caller.  Just call do_allocate_commons_list twice.
(Symbol_table::do_allocate_commons_list): New function, broken out
of do_allocate_commons.
* common.h (class Allocate_commons_task): Remove options_ field.
Update constructor.
* symtab.cc (Symbol_table::Symbol_table): Initialize
tls_commons_.
(Symbol_table::add_from_object): Put TLS common symbols on
tls_commons_ list.
(Symbol_table::sized_finalize_symbol): Handle STT_TLS symbols
which are IN_OUTPUT_DATA.
* symtab.h (class Symbol_table): Add tls_commons_ field.  Update
allocate_commons and do_allocate_commons declarations.  Declare
do_allocate_commons_list.
* gold.cc (queue_middle_tasks): Update creation of
Allocate_commons_task to not pass options.
* testsuite/Makefile.am (INCLUDES): Add -I.. .
(TLS_TEST_C_FLAGS): New variable.
(tls_test_c_pic.o): New target.
(tls_test_shared.so): Link in tls_test_c_pic.o.
(tls_test_c_pic_ie.o): New target.
(tls_test_ie_shared.so): Link in tls_test_c_pic_ie.o.
(tls_test_DEPENDENCIES, tls_test_LDADD): Add tls_test_c.o.
(tls_test_c.o): New target.
(tls_pic_test_DEPENDENCIES): Add tls_test_c_pic.o.
(tls_pic_test_LDADD): Likewise.
(tls_shared_gd_to_ie_test_DEPENDENCIES): Add tls_test_c_pic.o.
(tls_shared_gd_to_ie_test_LDADD): Likewise.
(tls_test_c_gnu2.o): New target.
(tls_shared_gnu2_gd_to_ie_test_DEPENDENCIES): Add
tls_test_c_gnu2.o.
(tls_shared_gnu2_gd_to_ie_test_LDADD): Likewise.
(tls_test_gnu2_shared.so): Link in tls_test_c_gnu2.o.
(tls_test_shared_nonpic.so): Link in tls_test_c.o.
* testsuite/tls_test.cc: Include "config.h".
(t_last): Call t11_last.
* testsuite/tls_test.h (t11, t11_last): Declare.
* testsuite/tls_test_c.c: New file.
* testsuite/tls_test_main.cc (thread_routine): Call t11.
* configure.ac: Check for OpenMP support.
* configure, config.in, Makefile.in: Rebuild.
* testsuite/Makefile.in: Rebuild.

* sparc.cc (Target_sparc::Scan): Change from struct to class.
Add issued_non_pic_error_ field.  Declare check_non_pic.
(Target_sparc::Scan::check_non_pic): New function.
(Target_sparc::Scan::local): Call check_non_pic as appropriate.
(Target_sparc::Scan::global): Likewise.

* configure.ac (FN_PTRS_IN_SO_WITHOUT_PIC): Add sparc64.
* configure: Rebuild.

* i386.cc (Target_i386::define_tls_base_symbol): New function.
(Target_i386::tls_base_symbol_defined_): New field.
(Target_i386::Scan::local): Define _TLS_MODULE_BASE_ symbol.
(Target_i386::Scan::global): Likewise.
* symtab.cc (sized_finalize_symbol): Add check for TLS symbol.
* x86_64.cc (Target_x86_64::define_tls_base_symbol): New function.
(Target_x86_64::tls_base_symbol_defined_): New field.
(Target_x86_64::Scan::local): Define _TLS_MODULE_BASE_ symbol.
(Target_x86_64::Scan::global): Likewise.

* cli/cli-decode.h (CMD_ASYNC_OK): New define.
(set_cmd_async_ok, get_cmd_async_ok): Declare.
* cli/cli-decode.c (set_cmd_async_ok): New function.
(get_cmd_async_ok): New function.
* cli/cli-cmds.c (init_cli_cmds): Mark "pwd", "help", "info", and
"show" as async-ok.
* top.c (execute_command): Use get_cmd_async_ok.
* infcmd.c: Include cli/cli-decode.h.
(_initialize_infcmd): Mark "interrupt" as async-ok.
* Makefile.in (infcmd.o): Depend on cli_decode_h.

* symtab.h (Symbol::is_strong_undefined): Removed unused function.
(Symbol::needs_plt_entry): Allow weak undefined symbols.
(Symbol::needs_dynamic_reloc): Allow weak undefined symbols when
building shared libraries.
* testsuite/Makefile.am (weak_undef_nonpic_test): New target.
(weak_undef_file1_nonpic.o, weak_undef_file2_nonpic.o)
(weak_undef_lib_nonpic.so, alt/weak_undef_lib_nonpic.so): New targets.
* testsuite/Makefile.in: Rebuild.
* testsuite/weak_undef.h: New file.
* testsuite/weak_undef_file1.cc: Add extra test cases.
* testsuite/weak_undef_file2.cc: Likewise.
* testsuite/weak_undef_test.cc: Likewise.

*** empty log message ***

daily update

elfcpp/

* elfcpp.h (DF_1_NOW, DF_1_GLOBAL, DF_1_GROUP,
DF_1_NODELETE, DF_1_LOADFLTR, DF_1_INITFIRST,
DF_1_NOOPEN, DF_1_ORIGIN, DF_1_DIRECT, DF_1_TRANS,
DF_1_INTERPOSE, DF_1_NODEFLIB, DF_1_NODUMP,
DF_1_CONLFAT): New enum constants.

gold/

* options.h (DEFINE_enable): New macro.
(new_dtags): New enable option.
(initfirst, interpose, loadfltr, nodefaultlib,
nodelete, nodlopen, nodump): New -z options.
* layout.cc (Layout:finish_dynamic_section): If new
dtags enabled, emit DT_RUNPATH.  Also, emit a
DT_FLAGS_1 containing any specified -z flags.

PR gdb/2445
* exec.c: Correct "arch-utils.h" include.

* copy-relocs.cc: New file.
* copy-relocs.h: New file.
* reloc.cc: Remove Copy_relocs code.
* reloc.h: Likewise.
* reloc-types.h (struct Reloc_types) [both versions]: Add
get_reloc_addend_noerror.
* output.h (class Output_data_reloc<elfcpp::SHT_REL>): Add
variants of add_global which take an addend which must be zero.
* i386.cc: Include "copy-relocs.h".
(class Target_i386): Change type of copy_relocs_ to variable,
update initializer.
(Target_i386::copy_reloc): Rewrite to pass to Copy_relocs class.
Change all callers.
(Target_i386::do_finalize_sections): Change handling of
copy_relocs_.
* sparc.cc: Include "copy-relocs.h".
(class Target_sparc): Change type of copy_relocs_ to variable,
update initializer.
(Target_sparc::copy_reloc): Rewrite to pass to Copy_relocs class.
Change all callers.
(Target_sparc::do_finalize_sections): Change handling of
copy_relocs_.
* x86_64.cc: Include "copy-relocs.h".
(class Target_x86_64): Change type of copy_relocs_ to variable,
update initializer.
(Target_x86_64::copy_reloc): Rewrite to pass to Copy_relocs
class.  Change all callers.
(Target_x86_64::do_finalize_sections): Change handling of
copy_relocs_.
* Makefile.am (CCFILES): Add copy-relocs.cc.
(HFILES): Add copy-relocs.h.

* Makefile.in, aclocal.m4, testsuite/Makefile.in: Rebuild.

* config.bfd (i[3-7]86-*-dicos*, x86_64-*-dicos*): Add.

* testsuite/script_test_4.sh: Permit leading zeroes.

<opcode changes>
2008-04-16  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
            Michael Meissner  <michael.meissner@amd.com>

        * i386-opc.tbl: Fix protX to allow memory in the middle operand.
        * i386-tbl.h: Regenerate from i386-opc.tbl.

<gas/testsuite changes>
2008-04-16  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
            Michael Meissner  <michael.meissner@amd.com>

        * gas/i386/x86-64-sse5.s: Add protX tests to allow memory in the middle
        operand.
        * gas/i386/x86-64-sse5.d: Likewise.

* gdb.texinfo (GDB/MI Simple Examples): Added 'disp' field to the
sample output for 'stopped,reason="breakpoint-hit"' message.
(GDB/MI Program Execution): Likewise.

Sorry, missed this ChangeLog updat in previous commit.

bfd/

* reloc.c (BFD_RELOC_SPARC_GOTDATA_HIX22,
BFD_RELOC_SPARC_GOTDATA_LOX10, BFD_RELOC_SPARC_GOTDATA_OP_HIX22,
BFD_RELOC_SPARC_GOTDATA_OP_LOX10, BFD_RELOC_SPARC_GOTDATA_OP): New.
* libbfd.h: Regnerate.
* bfd-in2.h: Regenerate.
* elfxx-sparc.c (_bfd_sparc_elf_howto_table): Add entries for
GOTDATA relocations.
(sparc_reloc_map): Likewise.
(_bfd_sparc_elf_check_relocs): Handle R_SPARC_GOTDATA_* like
R_SPARC_GOT*.
(_bfd_sparc_elf_gc_sweep_hook): Likewise.
(_bfd_sparc_elf_relocate_section): Transform R_SPARC_GOTDATA_HIX22,
R_SPARC_GOTDATA_LOX10, R_SPARC_GOTDATA_OP_HIX22, and
R_SPARC_GOTDATA_OP_LOX10 into the equivalent R_SPARC_GOT* reloc.
Simply ignore R_SPARC_GOTDATA_OP relocations.

gas/

* config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
and relocation generation.
(tc_gen_reloc): Likewise.

gas/testsuite/

* gas/sparc/gotops32.d: New.
* gas/sparc/gotops32.s: Likewise.
* gas/sparc/gotops64.d: Likewise.
* gas/sparc/gotops64.s: Likewise.
* gas/sparc/sparc.exp: Run new gotdata tests.

ld/testsuite/

* ld-sparc/gotop32.dd: New.
* ld-sparc/gotop32.rd: Likewise.
* ld-sparc/gotop32.s: Likewise.
* ld-sparc/gotop32.sd: Likewise.
* ld-sparc/gotop32.td: Likewise.
* ld-sparc/gotop64.dd: Likewise.
* ld-sparc/gotop64.rd: Likewise.
* ld-sparc/gotop64.s: Likewise.
* ld-sparc/gotop64.sd: Likewise.
* ld-sparc/gotop64.td: Likewise.
* ld-sparc/sparc.exp: Run new gotdata tests.

* elf/sparc.h (R_SPARC_GOTDATA_HIX22,
R_SPARC_GOTDATA_LOX10, R_SPARC_GOTDATA_OP_HIX22,
R_SPARC_GOTDATA_OP_LOX10, R_SPARC_GOTDATA_OP,
R_SPARC_H34, R_SPARC_SIZE32, R_SPARC_SIZE64): New relocs.

Move entries for changes in sub-directories into the changelogs in those sub-
directories.

    PR binutils/6034
        * objcopy.c (stuct symlist): Rename to
        is_specified_symbol_predicate_data.
        (strip_specific_list): Rename to strip_specific_htab.
        (strip_unneeded_list): Rename to strip_unneeded_htab.
        (keep_specific_list):  Rename to keep_specific_htab.
        (localize_specific_list): Rename to localize_specific_htab.
        (globalize_specific_list): Rename to globalize_specific_htab.
        (keepglobal_specific_list): Rename to keepglobal_specific_htab.
        (weaken_specific_list): Rename to weaken_specific_htab.
        (eq_string): New function.
        (create_symbol_htab): New function.
        (create_symbol_htabs): New function.
        (add_specific_symbol): Change to use hash tables.
        (is_specified_symbol_predicate): New function.
        (is_specified_symbol): Use hash table lookup.
        (is_strip_section): Update to use new functions and hash tables.
        (filter_symbols): Likewise.
        (copy_object): Likewise.
        (copy_section): Likewise.
        (strip_main): Likewise.
        (copy_main): Likewise.
        (main): Likewise.

* sparc.h (EF_SPARC_EXT_MASK, EF_SPARC_32PLUS_MASK,
EF_SPARC_32PLUS, EF_SPARC_SUN_US1, EF_SPARC_HAL_R1,
EF_SPARC_SUN_US3, EF_SPARC_LEDATA, EF_SPARCV9_MM,
EF_SPARCV9_TSO, EF_SPARCV9_PSO, EF_SPARCV9_RMO):
Define as enum constants.

*** empty log message ***

daily update

* script-sections.cc (Script_sections::create_segments): Use
header_size_adjustment even when there is enough room for the
headers.
* testsuite/script_test_4.sh: New file.
* testsuite/script_test_4.t: New file.
* testsuite/Makefile.am (check_SCRIPTS): Add script_test_4.sh.
(check_DATA): Add script_test_4.stdout.
(MOSTLYCLEANFILES): Likewise.
(script_test_4): New target.
(script_test_4.stdout): New target.
* testsuite/Makefile.in: Rebuild.

* sparc.cc: Add definitions for Output_data_plt_sparc class
constants.

2008-04-15  Andrew Stubbs  <andrew.stubbs@st.com>

gas/

* config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
relocations are properly aligned, and not negative.

gas/testsuite/

* gas/sh/arch/arch.exp: Align PC-relative instructions in the gererated
assembly files.
* gas/sh/arch/sh-dsp.s: Regenerate.
* gas/sh/arch/sh.s: Regenerate.
* gas/sh/arch/sh2.s: Regenerate.
* gas/sh/arch/sh2a-nofpu-or-sh3-nommu.s: Regenerate.
* gas/sh/arch/sh2a-nofpu-or-sh4-nommu-nofpu.s: Regenerate.
* gas/sh/arch/sh2a-nofpu.s: Regenerate.
* gas/sh/arch/sh2a-or-sh3e.s: Regenerate.: Regenerate.
* gas/sh/arch/sh2a-or-sh4.s: Regenerate.
* gas/sh/arch/sh2a.s: Regenerate.
* gas/sh/arch/sh2e.s: Regenerate.
* gas/sh/arch/sh3-dsp.s: Regenerate.
* gas/sh/arch/sh3-nommu.s: Regenerate.
* gas/sh/arch/sh3.s: Regenerate.
* gas/sh/arch/sh3e.s: Regenerate.
* gas/sh/arch/sh4-nofpu.s: Regenerate.
* gas/sh/arch/sh4-nommu-nofpu.s: Regenerate.
* gas/sh/arch/sh4.s: Regenerate.
* gas/sh/arch/sh4a-nofpu.s: Regenerate.
* gas/sh/arch/sh4a.s: Regenerate.
* gas/sh/arch/sh4al-dsp.s: Regenerate.
* gas/sh/err-mova.s: New test.

ld/testsuite/

* ld-sh/arch/sh-dsp.s: Regenerate.
* ld-sh/arch/sh.s: Regenerate.
* ld-sh/arch/sh2.s: Regenerate.
* ld-sh/arch/sh2a-nofpu-or-sh3-nommu.s: Regenerate.
* ld-sh/arch/sh2a-nofpu-or-sh4-nommu-nofpu.s: Regenerate.
* ld-sh/arch/sh2a-nofpu.s: Regenerate.
* ld-sh/arch/sh2a-or-sh3e.s: Regenerate.: Regenerate.
* ld-sh/arch/sh2a-or-sh4.s: Regenerate.
* ld-sh/arch/sh2a.s: Regenerate.
* ld-sh/arch/sh2e.s: Regenerate.
* ld-sh/arch/sh3-dsp.s: Regenerate.
* ld-sh/arch/sh3-nommu.s: Regenerate.
* ld-sh/arch/sh3.s: Regenerate.
* ld-sh/arch/sh3e.s: Regenerate.
* ld-sh/arch/sh4-nofpu.s: Regenerate.
* ld-sh/arch/sh4-nommu-nofpu.s: Regenerate.
* ld-sh/arch/sh4.s: Regenerate.
* ld-sh/arch/sh4a-nofpu.s: Regenerate.
* ld-sh/arch/sh4a.s: Regenerate.
* ld-sh/arch/sh4al-dsp.s: Regenerate.

* gdb.base/attach.exp (do_attach_tests): Matching pattern for
temporary breakpoint to match "Temporary breakpoint".
* gdb.base/break.exp (delete_breakpoints): Likewise.
* gdb.base/call-ar-st.exp (get_debug_format): Likewise.
* gdb.base/commands.exp (temporary_breakpoint_commands): Likewise.
* gdb.base/display.exp: Likewise.
* gdb.base/foll-exec.exp (do_exec_tests): Likewise.
* gdb.base/foll-fork.exp (catch_fork_child_follow): Likewise.
* gdb.base/restore.exp (restore_tests): Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.mi/mi-cli.exp: Added argument for new "disp" field.
* gdb.mi/mi-pending.exp: Likewise.
* gdb.mi/mi-simplerun.exp (test_running_the_program): Likewise.
* gdb.mi/mi-until.exp (test_runnint_to_foo): Likewise.
* gdb.mi/mi-var-cmd.exp: Likewise.
* gdb.mi/mi-var-display.exp: Likewise.
* gdb.mi/mi2-cli.exp: Likewise.
* gdb.mi/mi2-simplerun.exp (test_running_the_program): Likewise.
* gdb.mi/mi2-until.exp (test_running_to_foo): Likewise.
* gdb.mi/mi2-var-display.exp: Likewise.
* lib/gdb.exp (gdb_breakpoint): Pattern for temporary breakpoint.
* lib/mi-support.exp (mi_runto_helper): Use "after_reason" argument for
new "disp" field.
(mi_expect_stop): Move after_reason argument to be really after
reason. This is to support fix for PR2424.

PR gdb/2424
* infrun.c (normal_stop) Move breakpoint_auto_delete further down
to allow printing to 'see' real reason of stop. This fixes PR 2424.
* breakpoint.c (bpdisp_texst): New function. The function takes over
the role of bpstats static array in print_one_breakpoint_location.
(print_it_typical): Print "Temporary breakpoint" instead
of just "Breakpoint" when breakpoint is, well, temporary. For mi-like
protocols, print disp field.
(print_one_breakpoint_location): Removed bpdisps static definition.
Call new bpstat_text function to get value for 'disp' field.
(mention): Print "Temporary breakpoint" instead of just "Breakpoint".

* doc/tc-arm.texi: Fix fnstart and fnend directive names.

* gnulib/Makefile.am, gnulib/m4/gnulib-cache.m4,
gnulib/aux/link-warning.h, gnulib/extra/link-warning.h: Adjust
by rerunning gnulib-tool with --aux-dir=gnulib/extra.
* gnulib/Makefile.in: Regenerate.

* gdb.dwarf2/dw2-ranges.S: New stub `.file' directive.

toplevel/

* configure.ac: Add sparc*-*-* to gold supported targets.
* configure: Regenerate.

gold/

* sparc.cc: New file.
* Makefile.am (TARGETSOURCES): Add sparc.cc
(ALL_TARGETOBJS): Add sparc.$(OBJEXT)
* configure.tgt: Document targ_extra_size and
targ_extra_big_endian.  Add entries for sparc-* and
sparc64-*.
* configure.ac: Handle targ_extra_size and
targ_extra_big_endian.
* Makefile.in: Rebuild.
* configure: Likewise.
* po/POTFILES.in: Likewise.
* po/gold.pot: Likewise.

* readelf.c (get_gnu_elf_note_type): Recognize NT_GNU_GOLD_VERSION.

* layout.cc (Layout::Layout): Initialize sections_are_attached_.
(Layout::get_output_section): Ignore SHF_WRITE and SHF_EXECINSTR
in the name/type/flags to section mapping.  Don't call
allocate_output_section.
(Layout::choose_output_section): Change parameter from adjust_name
to is_input_section.  Don't permit input sections after sections
are attached to segments.  Don't call allocate_output_section.
(Layout::layout_eh_frame): Call update_flags_for_input_section,
not write_enable_output_section.
(Layout::make_output_section): Don't push to
unattached_section_list_ nor call attach_to_segment.  Call
attach_section_to_segment if sections are attached.
(Layout::attach_sections_to_segments): New function.
(Layout::attach_section_to_segment): New function.
(Layout::attach_allocated_section_to_segment): Rename from
attach_to_segment.  Remove flags parameter.
(Layout::allocate_output_section): Remove function.
(Layout::write_enable_output_section): Remove function.
* layout.h (class Layout): Update for above changes.  Add new
field sections_are_attached_.
* output.h (Output_section::update_flags_for_input_section): New
function.
* output.cc (Output_section::add_input_section): Call
update_flags_for_input_section.
* gold.cc (queue_middle_tasks): Call attach_sections_to_segments.

daily update

*** empty log message ***

* configure.in: Link with the PIC version of libiberty on
Linux/MIPS hosts.
* configure: Regenerate.