Mauro Carvalho Chehab [Fri, 7 Dec 2018 11:13:48 +0000 (06:13 -0500)]
media: cetrus: return an error if alloc fails
As warned by smatch:
drivers/staging/media/sunxi/cedrus/cedrus.c: drivers/staging/media/sunxi/cedrus/cedrus.c:93 cedrus_init_ctrls() error: potential null dereference 'ctx->ctrls'. (kzalloc returns null)
While here, remove the memset(), as kzalloc() already zeroes the
struct.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Wed, 5 Dec 2018 09:24:42 +0000 (04:24 -0500)]
media: cedrus: Add device-tree compatible and variant for A64 support
Add the necessary compatible for supporting the A64 SoC along with a
description of the capabilities of this variant.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Wed, 5 Dec 2018 09:24:41 +0000 (04:24 -0500)]
media: cedrus: Add device-tree compatible and variant for H5 support
Add the necessary compatible for supporting the H5 SoC along with a
description of the capabilities of this variant.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Wed, 5 Dec 2018 09:24:40 +0000 (04:24 -0500)]
media: dt-bindings: media: cedrus: Add compatibles for the A64 and H5
This introduces two new compatibles for the cedrus driver, for the
A64 and H5 platforms.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Matt Ranostay [Sat, 24 Nov 2018 22:03:23 +0000 (17:03 -0500)]
media: video-i2c: check if chip struct has set_power function
Not all future supported video chips will always have power management
support, and so it is important to check before calling set_power() is
defined.
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Akinobu Mita [Thu, 22 Nov 2018 16:13:56 +0000 (11:13 -0500)]
media: video-i2c: support runtime PM
AMG88xx has a register for setting operating mode. This adds support
runtime PM by changing the operating mode.
The instruction for changing sleep mode to normal mode is from the
reference specifications.
https://docid81hrs3j1.cloudfront.net/medialibrary/2017/11/PANA-S-
A0002141979-1.pdf
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rob Herring [Wed, 5 Dec 2018 19:50:42 +0000 (14:50 -0500)]
media: staging: media: imx: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which this is.
Cc: Steve Longerbeam <slongerbeam@gmail.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Luca Ceresoli [Wed, 5 Dec 2018 16:55:37 +0000 (11:55 -0500)]
media: v4l2-subdev: document controls need _FL_HAS_DEVNODE
Control events can be subscribed and received by the user. Therefore
drivers that support controls must expose the
V4L2_SUBDEV_FL_HAS_EVENTS flag.
[As discussed in https://lkml.org/lkml/2018/11/27/637]
Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Gabriel Francisco Mandaji [Sun, 2 Dec 2018 13:45:38 +0000 (08:45 -0500)]
media: vivid: Improve timestamping
Simulate a more precise timestamp by calculating it based on the
current framerate.
Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: replaced division by 2 with bit shift]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sergei Shtylyov [Mon, 6 Aug 2018 18:48:20 +0000 (14:48 -0400)]
media: rcar-vin: add R8A77980 support
Add the R8A77980 SoC support to the R-Car VIN driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sergei Shtylyov [Mon, 6 Aug 2018 16:56:27 +0000 (12:56 -0400)]
media: rcar-csi2: add R8A77980 support
Add the R-Car V3H (AKA R8A77980) SoC support to the R-Car CSI2 driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Rob Herring [Thu, 6 Dec 2018 19:35:19 +0000 (14:35 -0500)]
media: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Vivek Gautam [Wed, 5 Dec 2018 08:31:51 +0000 (03:31 -0500)]
media: venus: core: Set dma maximum segment size
Turning on CONFIG_DMA_API_DEBUG_SG results in the following error:
[ 460.308650] ------------[ cut here ]------------
[ 460.313490] qcom-venus aa00000.video-codec: DMA-API: mapping sg segment longer than device claims to support [len=4194304] [max=65536]
[ 460.326017] WARNING: CPU: 3 PID: 3555 at src/kernel/dma/debug.c:1301 debug_dma_map_sg+0x174/0x254
[ 460.338888] Modules linked in: venus_dec venus_enc videobuf2_dma_sg videobuf2_memops hci_uart btqca bluetooth venus_core v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath10k_snoc ath10k_core ath lzo lzo_compress zramjoydev
[ 460.375811] CPU: 3 PID: 3555 Comm: V4L2DecoderThre Tainted: G W 4.19.1 #82
[ 460.384223] Hardware name: Google Cheza (rev1) (DT)
[ 460.389251] pstate:
60400009 (nZCv daif +PAN -UAO)
[ 460.394191] pc : debug_dma_map_sg+0x174/0x254
[ 460.398680] lr : debug_dma_map_sg+0x174/0x254
[ 460.403162] sp :
ffffff80200c37d0
[ 460.406583] x29:
ffffff80200c3830 x28:
0000000000010000
[ 460.412056] x27:
00000000ffffffff x26:
ffffffc0f785ea80
[ 460.417532] x25:
0000000000000000 x24:
ffffffc0f4ea1290
[ 460.423001] x23:
ffffffc09e700300 x22:
ffffffc0f4ea1290
[ 460.428470] x21:
ffffff8009037000 x20:
0000000000000001
[ 460.433936] x19:
ffffff80091b0000 x18:
0000000000000000
[ 460.439411] x17:
0000000000000000 x16:
000000000000f251
[ 460.444885] x15:
0000000000000006 x14:
0720072007200720
[ 460.450354] x13:
ffffff800af536e0 x12:
0000000000000000
[ 460.455822] x11:
0000000000000000 x10:
0000000000000000
[ 460.461288] x9 :
537944d9c6c48d00 x8 :
537944d9c6c48d00
[ 460.466758] x7 :
0000000000000000 x6 :
ffffffc0f8d98f80
[ 460.472230] x5 :
0000000000000000 x4 :
0000000000000000
[ 460.477703] x3 :
000000000000008a x2 :
ffffffc0fdb13948
[ 460.483170] x1 :
ffffffc0fdb0b0b0 x0 :
000000000000007a
[ 460.488640] Call trace:
[ 460.491165] debug_dma_map_sg+0x174/0x254
[ 460.495307] vb2_dma_sg_alloc+0x260/0x2dc [videobuf2_dma_sg]
[ 460.501150] __vb2_queue_alloc+0x164/0x374 [videobuf2_common]
[ 460.507076] vb2_core_reqbufs+0xfc/0x23c [videobuf2_common]
[ 460.512815] vb2_reqbufs+0x44/0x5c [videobuf2_v4l2]
[ 460.517853] v4l2_m2m_reqbufs+0x44/0x78 [v4l2_mem2mem]
[ 460.523144] v4l2_m2m_ioctl_reqbufs+0x1c/0x28 [v4l2_mem2mem]
[ 460.528976] v4l_reqbufs+0x30/0x40
[ 460.532480] __video_do_ioctl+0x36c/0x454
[ 460.536610] video_usercopy+0x25c/0x51c
[ 460.540572] video_ioctl2+0x38/0x48
[ 460.544176] v4l2_ioctl+0x60/0x74
[ 460.547602] do_video_ioctl+0x948/0x3520
[ 460.551648] v4l2_compat_ioctl32+0x60/0x98
[ 460.555872] __arm64_compat_sys_ioctl+0x134/0x20c
[ 460.560718] el0_svc_common+0x9c/0xe4
[ 460.564498] el0_svc_compat_handler+0x2c/0x38
[ 460.568982] el0_svc_compat+0x8/0x18
[ 460.572672] ---[ end trace
ce209b87b2f3af88 ]---
>From above warning one would deduce that the sg segment will overflow
the device's capacity. In reality, the hardware can accommodate larger
sg segments.
So, initialize the max segment size properly to weed out this warning.
Based on a similar patch sent by Sean Paul for mdss:
https://patchwork.kernel.org/patch/
10671457/
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kelvin Lawson [Fri, 30 Nov 2018 00:07:28 +0000 (19:07 -0500)]
media: venus: Support V4L2 QP parameters in Venus encoder
Support V4L2 QP parameters in Venus encoder:
* V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP
* V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP
* V4L2_CID_MPEG_VIDEO_H264_MIN_QP
* V4L2_CID_MPEG_VIDEO_H264_MAX_QP
Signed-off-by: Kelvin Lawson <klawson@lisden.com>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ezequiel Garcia [Thu, 6 Dec 2018 19:46:39 +0000 (14:46 -0500)]
media: v4l2-ioctl: Zero v4l2_plane_pix_format reserved fields
Make the core set the reserved fields to zero in
vv4l2_pix_format_mplane.4l2_plane_pix_format,
for _MPLANE queue types.
Moving this to the core avoids having to do so in each
and every driver.
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Lubomir Rintel [Mon, 3 Dec 2018 11:47:42 +0000 (06:47 -0500)]
media: marvell-ccic: trivial fix to the datasheet URL
Update URL.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Todor Tomov [Fri, 30 Nov 2018 12:01:39 +0000 (07:01 -0500)]
media: MAINTAINERS: Change Todor Tomov's email address
My Linaro email address with be inactive very soon so switch
it to my Gmail address.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Paul Kocialkowski [Fri, 30 Nov 2018 08:16:17 +0000 (03:16 -0500)]
media: cedrus: Remove global IRQ spin lock from the driver
We initially introduced a spin lock to ensure that the VPU registers
are not accessed concurrently between our setup function and IRQ
handler. The V4L2 M2M API ensures that only one decoding job runs at a
time, so the interrupt signaling the end of decoding will not occur
while the next picture is being configured.
Spurious interrupts are taken care of in the handler, by checking that
we have a valid M2M context and a decoding status available before
marking the buffers as done.
In addition, holding a spin lock could be problematic if non-atomic
operations are required in the setup process for future codec support.
As a result, remove the global IRQ spin lock.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Thu, 29 Nov 2018 10:50:38 +0000 (05:50 -0500)]
media: sun6i: fix spelling mistake "droped" -> "dropped"
There are spelling mistakes in dev_dbg messages, fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Thu, 29 Nov 2018 10:19:45 +0000 (05:19 -0500)]
media: pvrusb2: fix spelling mistake "statuss" -> "status"
There is a spelling mistake in a pvr2_trace trace message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Philipp Zabel [Wed, 28 Nov 2018 13:01:22 +0000 (08:01 -0500)]
media: coda: fix H.264 deblocking filter controls
Add support for the third loop filter mode
V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY,
and fix V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA and
V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA controls.
The filter offset controls are signed values in the -6 to 6 range and
are stored into the slice header fields slice_alpha_c0_offset_div2 and
slice_beta_offset_div2. The actual filter offsets FilterOffsetA/B are
double their value, in range of -12 to 12.
Rename variables to more closely match the nomenclature in the H.264
specification.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Philipp Zabel [Wed, 28 Nov 2018 13:01:21 +0000 (08:01 -0500)]
media: v4l2: clarify H.264 loop filter offset controls
The venus and s5p-mfc drivers add the loop filter alpha/beta offset
controls V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA/BETA with a range of
-6 to +6, inclusive. This is exactly the range specified for the slice
header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2,
which store half the actual filter offsets FilterOffsetA/B.
Clarify that this control contains the halved offsets.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Dmitry Osipenko [Mon, 19 Nov 2018 11:17:18 +0000 (06:17 -0500)]
media: staging: tegra-vde: Replace debug messages with trace points
Trace points are much more efficient than debug messages for intensive
tracing and could be conveniently enabled / disabled dynamically, hence
let's replace debug messages with the trace points. This also makes
code a bit cleaner.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Malathi Gottam [Fri, 2 Nov 2018 12:57:56 +0000 (08:57 -0400)]
media: venus: add support for key frame
When client requests for a keyframe, set the property
to hardware to generate the sync frame.
Signed-off-by: Malathi Gottam <mgottam@codeaurora.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Malcolm Priestley [Wed, 5 Dec 2018 19:14:31 +0000 (14:14 -0500)]
media: lmedm04: Move interrupt buffer to priv buffer.
Interrupt is always present throughout life time of driver and
there is no dma element move this buffer to private area of driver.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Malcolm Priestley [Wed, 5 Dec 2018 19:11:57 +0000 (14:11 -0500)]
media: lmedm04: Add missing usb_free_urb to free interrupt urb.
The interrupt urb is killed but never freed add the function
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Andreas Pape [Fri, 23 Nov 2018 16:14:54 +0000 (11:14 -0500)]
media: stkwebcam: Bugfix for wrong return values
usb_control_msg returns in case of a successfully sent message the number
of sent bytes as a positive number. Don't use this value as a return value
for stk_camera_read_reg, as a non-zero return value is used as an error
condition in some cases when stk_camera_read_reg is called.
Signed-off-by: Andreas Pape <ap@ca-pape.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Andreas Pape [Fri, 23 Nov 2018 16:14:52 +0000 (11:14 -0500)]
media: stkwebcam: Support for ASUS A6VM notebook added.
The ASUS A6VM notebook has a built in stk11xx webcam which is mounted
in a way that the video is vertically and horizontally flipped.
Therefore this notebook is added to the special handling in the driver
to automatically flip the video into the correct orientation.
Signed-off-by: Andreas Pape <ap@ca-pape.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Wed, 5 Dec 2018 18:42:30 +0000 (13:42 -0500)]
media: rockchip/vpu: fix a few alignments
As reported by checkpatch.pl, some function calls have a wrong
alignment.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ezequiel Garcia [Wed, 5 Dec 2018 16:09:52 +0000 (11:09 -0500)]
media: add Rockchip VPU JPEG encoder driver
Add a mem2mem driver for the VPU available on Rockchip SoCs.
Currently only JPEG encoding is supported, for RK3399 and RK3288
platforms.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch.pl alignment warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ezequiel Garcia [Fri, 30 Nov 2018 17:34:30 +0000 (12:34 -0500)]
media: dt-bindings: Document the Rockchip VPU bindings
Add devicetree binding documentation for Rockchip Video Processing
Unit IP.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Wed, 5 Dec 2018 18:16:24 +0000 (13:16 -0500)]
Merge commit '
0072a0c14d5b7cb72c611d396f143f5dcd73ebe2' into patchwork
Merge from Upstream after the latest media fixes branch, because we
need one patch that it is there.
* commit '
0072a0c14d5b7cb72c611d396f143f5dcd73ebe2': (1108 commits)
ide: Change to use DEFINE_SHOW_ATTRIBUTE macro
ide: pmac: add of_node_put()
drivers/tty: add missing of_node_put()
drivers/sbus/char: add of_node_put()
sbus: char: add of_node_put()
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
...
Mauro Carvalho Chehab [Fri, 23 Nov 2018 18:21:10 +0000 (13:21 -0500)]
media: pixfmt-meta-d4xx.rst: Add a license to it
This file is a recent addition to media docs, and it is now the
only one without any license.
While the best is to dual-license with GFDL and GPL, it is,
at least, compatible with GFDL, as this is a requirement to be
part of the media uAPI docs.
So, add such license to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Thu, 30 Aug 2018 14:20:04 +0000 (10:20 -0400)]
media: docs: brainless mass add SPDX headers to all media files
All Documentation files outside the uAPI are all licensed with,
at least, GPL 2.0. So, mark them as such.
The ondes at media/uapi are at least GFDL 1.1+.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Thu, 30 Aug 2018 15:07:49 +0000 (11:07 -0400)]
media: svg files: dual-licence some files with GPL and GFDL
Along the time, several image files got replaced by me by
new ones with similar contents.
As those were not simple conversions, dual-license them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Thu, 30 Aug 2018 14:15:26 +0000 (10:15 -0400)]
media: add SPDX header to media uAPI files
All those files are under GFDL 1.1 or later, with no invariant sections.
Tag them as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Thu, 30 Aug 2018 14:09:48 +0000 (10:09 -0400)]
media: remove text encoding from rst files
This is not needed there. Also, the same UTF-8 encoding should
be used on all documents.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ben Hutchings [Fri, 23 Nov 2018 18:38:34 +0000 (13:38 -0500)]
media: Documentation/media: uapi: Explicitly say there are no Invariant Sections
The GNU Free Documentation License allows for a work to specify
Invariant Sections that are not allowed to be modified. (Debian
considers that this makes such works non-free.)
The Linux Media Infrastructure userspace API documentation does not
specify any such sections, but it also doesn't say there are none (as
is recommended by the license text). Make it explicit that there are
none.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marcus Metzler <mocm@metzlerbros.de>
Signed-off-by: Michael Ira Krufky <mkrufky@gmail.com>
Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Dafna Hirschfeld [Tue, 4 Dec 2018 20:54:37 +0000 (15:54 -0500)]
media: vicodec: Change variable names
Change variables names in vicodec-core.c to *_src *_dst
to improve readability
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Niklas Söderlund [Fri, 30 Nov 2018 02:11:07 +0000 (21:11 -0500)]
media: v4l2: async: remove locking when initializing async notifier
There is no need to hold the list_lock when initializing the local
asd_list of a notifier. Remove the lock handling to simplify the code
and remove a potential LOCKDEP warning.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reported-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:27 +0000 (03:44 -0500)]
media: ov5640: Remove duplicate auto-exposure setup
The autoexposure setup in the 1080p init array is redundant with the
default value of the sensor.
Remove it.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:26 +0000 (03:44 -0500)]
media: ov5640: Add 60 fps support
Now that we have everything in place to compute the clock rate at runtime,
we can enable the 60fps framerate for the mode we tested it with.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:25 +0000 (03:44 -0500)]
media: ov5640: Make the FPS clamping / rounding more extendable
The current code uses an algorithm to clamp the FPS values and round them
to the closest supported one that isn't really allows to be extended to
more than two values.
Rework it a bit to make it much easier to extend the amount of FPS options
we support.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:24 +0000 (03:44 -0500)]
media: ov5640: Make the return rate type more explicit
In the ov5640_try_frame_interval function, the ret variable actually holds
the frame rate index to use, which is represented by the enum
ov5640_frame_rate in the driver.
Make it more obvious.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:23 +0000 (03:44 -0500)]
media: ov5640: Enhance FPS handling
Now that we have moved the clock generation logic out of the bytes array,
these arrays are identical between the 15fps and 30fps variants.
Remove the duplicate entries, and convert the code accordingly.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:22 +0000 (03:44 -0500)]
media: ov5640: Remove pixel clock rates
The pixel clock rates were introduced to report the initially static clock
rate.
Since this is now handled dynamically, we can remove them entirely.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:21 +0000 (03:44 -0500)]
media: ov5640: Compute the clock rate at runtime
The clock rate, while hardcoded until now, is actually a function of the
resolution, framerate and bytes per pixel. Now that we have an algorithm to
adjust our clock rate, we can select it dynamically when we change the
mode.
This changes a bit the clock rate being used, with the following effect:
+------+------+------+------+-----+-----------------+----------------+-----------+
| Hact | Vact | Htot | Vtot | FPS | Hardcoded clock | Computed clock | Deviation |
+------+------+------+------+-----+-----------------+----------------+-----------+
| 640 | 480 | 1896 | 1080 | 15 |
56000000 |
61430400 | 8.84 % |
| 640 | 480 | 1896 | 1080 | 30 |
112000000 |
122860800 | 8.84 % |
| 1024 | 768 | 1896 | 1080 | 15 |
56000000 |
61430400 | 8.84 % |
| 1024 | 768 | 1896 | 1080 | 30 |
112000000 |
122860800 | 8.84 % |
| 320 | 240 | 1896 | 984 | 15 |
56000000 |
55969920 | 0.05 % |
| 320 | 240 | 1896 | 984 | 30 |
112000000 |
111939840 | 0.05 % |
| 176 | 144 | 1896 | 984 | 15 |
56000000 |
55969920 | 0.05 % |
| 176 | 144 | 1896 | 984 | 30 |
112000000 |
111939840 | 0.05 % |
| 720 | 480 | 1896 | 984 | 15 |
56000000 |
55969920 | 0.05 % |
| 720 | 480 | 1896 | 984 | 30 |
112000000 |
111939840 | 0.05 % |
| 720 | 576 | 1896 | 984 | 15 |
56000000 |
55969920 | 0.05 % |
| 720 | 576 | 1896 | 984 | 30 |
112000000 |
111939840 | 0.05 % |
| 1280 | 720 | 1892 | 740 | 15 |
42000000 |
42002400 | 0.01 % |
| 1280 | 720 | 1892 | 740 | 30 |
84000000 |
84004800 | 0.01 % |
| 1920 | 1080 | 2500 | 1120 | 15 |
84000000 |
84000000 | 0.00 % |
| 1920 | 1080 | 2500 | 1120 | 30 |
168000000 |
168000000 | 0.00 % |
| 2592 | 1944 | 2844 | 1944 | 15 |
84000000 |
165862080 | 49.36 % |
+------+------+------+------+-----+-----------------+----------------+-----------+
Only the 640x480, 1024x768 and 2592x1944 modes are significantly affected
by the new formula.
In this case, 640x480 and 1024x768 are actually fixed by this change.
Indeed, the sensor was sending data at, for example, 27.33fps instead of
30fps. This is -9%, which is roughly what we're seeing in the array.
Testing these modes with the new clock setup actually fix that error, and
data are now sent at around 30fps.
2592x1944, on the other hand, is probably due to the fact that this mode
can only be used using MIPI-CSI2, in a two lane mode, and never really
tested with a DVP bus.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:20 +0000 (03:44 -0500)]
media: ov5640: Remove redundant register setup
The MIPI divider is also cleared as part of the clock setup sequence, so we
can remove that code.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:19 +0000 (03:44 -0500)]
media: ov5640: Remove redundant defines
The OV5640_SCLK2X_ROOT_DIVIDER_DEFAULT and OV5640_SCLK_ROOT_DIVIDER_DEFAULT
defines represent exactly the same setup, and are at the same value, than
the more consistent with the rest of the driver OV5640_SCLK2X_ROOT_DIV and
OV5640_SCLK_ROOT_DIV.
Remove them.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:18 +0000 (03:44 -0500)]
media: ov5640: Remove the clocks registers initialization
Part of the hardcoded initialization sequence is to set up the proper clock
dividers. However, this is now done dynamically through proper code and as
such, the static one is now redundant.
Let's remove it.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Maxime Ripard [Mon, 3 Dec 2018 08:44:17 +0000 (03:44 -0500)]
media: ov5640: Adjust the clock based on the expected rate
The clock structure for the PCLK is quite obscure in the documentation, and
was hardcoded through the bytes array of each and every mode.
This is troublesome, since we cannot adjust it at runtime based on other
parameters (such as the number of bytes per pixel), and we can't support
either framerates that have not been used by the various vendors, since we
don't have the needed initialization sequence.
We can however understand how the clock tree works, and then implement some
functions to derive the various parameters from a given rate. And now that
those parameters are calculated at runtime, we can remove them from the
initialization sequence.
The modes also gained a new parameter which is the clock that they are
running at, from the register writes they were doing, so for now the switch
to the new algorithm should be transparent.
Co-Developed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx6dq
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jacopo Mondi [Mon, 3 Dec 2018 08:44:16 +0000 (03:44 -0500)]
media: ov5640: Fix set format regression
The set_fmt operations updates the sensor format only when the image format
is changed. When only the image sizes gets changed, the format do not get
updated causing the sensor to always report the one that was previously in
use.
Without this patch, updating frame size only fails:
[fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb ...]
With this patch applied:
[fmt:UYVY8_2X8/1024x768@1/30 field:none colorspace:srgb xfer:srgb ...]
Fixes:
6949d864776e ("media: ov5640: do not change mode if format or frame interval is unchanged")
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6 w/ CSI2 interface on 4.19.6 and 4.20-RC5
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Enrico Scholz [Tue, 27 Nov 2018 10:02:53 +0000 (05:02 -0500)]
media: mt9m111: allow to setup pixclk polarity
The chip can be configured to output data transitions on the
rising or falling edge of PIXCLK (Datasheet R58:1[9]), default is on the
falling edge.
Parsing the fw-node is made in a subfunction to bundle all (future)
dt-parsing / fw-parsing stuff.
[m.grzeschik@pengutronix.de: Fix inverting clock. INV_PIX_CLOCK bit is set
per default. Set bit to 0 (enable mask bit without value) to enable
falling edge sampling.]
[m.felsch@pengutronix.de: use fwnode helpers]
[m.felsch@pengutronix.de: mv fw parsing into own function]
[m.felsch@pengutronix.de: adapt commit msg]
[sakari.ailus@linux.intel.com: V4L2 API usage changes to compile
on media tree master]
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Marco Felsch [Tue, 27 Nov 2018 10:02:52 +0000 (05:02 -0500)]
media: dt-bindings: media: mt9m111: add pclk-sample property
Add the pclk-sample property to the list of optional properties
for the mt9m111 camera sensor.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Marco Felsch [Tue, 27 Nov 2018 10:02:51 +0000 (05:02 -0500)]
media: dt-bindings: media: mt9m111: adapt documentation to be more clear
Replace the vague binding by a more verbose. Remove the remote property
from the example since the driver don't support such a property. Also
remove the bus-width property from the endpoint since the driver don't
take care of it.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Michael Grzeschik [Tue, 27 Nov 2018 10:02:50 +0000 (05:02 -0500)]
media: mt9m111: add support to select formats and fps for {Q,SXGA}
This patch implements the framerate selection using the skipping and
readout power-modi features. The power-modi cut the framerate by half
and each context has an independent selection bit. The same applies to
the 2x skipping feature.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Michael Grzeschik [Tue, 27 Nov 2018 10:02:49 +0000 (05:02 -0500)]
media: mt9m111: add streaming check to set_fmt
Currently set_fmt don't care about the streaming status, so the format
can be changed during streaming. This can lead into wrong behaviours.
Check if the device is already streaming and return -EBUSY to avoid
wrong behaviours.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Marco Felsch [Tue, 27 Nov 2018 10:02:48 +0000 (05:02 -0500)]
media: mt9m111: add s_stream callback
Add callback to check if we are already streaming. Now other callbacks
can check the state and return -EBUSY if we already streaming.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Luca Ceresoli [Tue, 27 Nov 2018 08:34:45 +0000 (03:34 -0500)]
media: imx274: select REGMAP_I2C
The imx274 driver uses regmap and the build will fail without it.
Fixes:
drivers/media/i2c/imx274.c:142:21: error: variable ‘imx274_regmap_config’ has initializer but incomplete type
static const struct regmap_config imx274_regmap_config = {
^~~~~~~~~~~~~
drivers/media/i2c/imx274.c:1869:19: error: implicit declaration of function ‘devm_regmap_init_i2c’ [-Werror=implicit-function-declaration]
imx274->regmap = devm_regmap_init_i2c(client, &imx274_regmap_config);
^~~~~~~~~~~~~~~~~~~~
and others.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Luca Ceresoli [Tue, 27 Nov 2018 08:34:44 +0000 (03:34 -0500)]
media: imx274: declare the correct number of controls
v4l2_ctrl_handler_init() expects a hint of how many controls this
handler is expected to refer to. Since this number here is always 4,
let's pass exactly 4.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Luca Ceresoli [Mon, 26 Nov 2018 16:35:07 +0000 (11:35 -0500)]
media: imx274: fix stack corruption in imx274_read_reg
imx274_read_reg() takes a u8 pointer ("reg") and casts it to pass it
to regmap_read(), which takes an unsigned int pointer. This results in
a corrupted stack and random crashes.
Fixes:
0985dd306f72 ("media: imx274: V4l2 driver for Sony imx274 CMOS sensor")
Cc: stable@vger.kernel.org # for 4.15 and up
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Bingbu Cao [Tue, 27 Nov 2018 04:01:01 +0000 (23:01 -0500)]
media: unify some sony camera sensors pattern naming
Some Sony camera sensors have same test pattern
definitions, this patch unify the pattern naming
to make it more clear to the userspace.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Bingbu Cao [Mon, 26 Nov 2018 07:43:34 +0000 (02:43 -0500)]
media: imx355: fix wrong order in test pattern menus
current imx355 test pattern order in ctrl menu
is not correct, this patch fixes it.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Bingbu Cao [Mon, 26 Nov 2018 07:43:33 +0000 (02:43 -0500)]
media: imx319: fix wrong order in test pattern menus
current imx319 test pattern order in ctrl menu
is not correct, this patch fixes it.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fabio Estevam [Fri, 23 Nov 2018 12:50:59 +0000 (07:50 -0500)]
media: v4l2-fwnode: Demote warning to debug level
On a imx6q-wandboard the following warnings are observed:
[ 4.327794] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: bad remote port parent
[ 4.336118] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: bad remote port parent
As explained by Philipp Zabel:
"There are empty endpoint nodes (without remote-endpoint property)
labeled ipu1_csi[01]_mux_from_parallel_sensor in the i.MX6 device trees
for board DT implementers' convenience. See commit
2539f517acbdc ("ARM:
dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections")."
So demote the warning to debug level and make the wording a bit
less misleading.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Nathan Chancellor [Thu, 18 Oct 2018 20:03:06 +0000 (16:03 -0400)]
media: firewire: Fix app_info parameter type in avc_ca{,_app}_info
Clang warns:
drivers/media/firewire/firedtv-avc.c:999:45: warning: implicit
conversion from 'int' to 'char' changes value from 159 to -97
[-Wconstant-conversion]
app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1000:45: warning: implicit
conversion from 'int' to 'char' changes value from 128 to -128
[-Wconstant-conversion]
app_info[1] = (EN50221_TAG_APP_INFO >> 8) & 0xff;
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1040:44: warning: implicit
conversion from 'int' to 'char' changes value from 159 to -97
[-Wconstant-conversion]
app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1041:44: warning: implicit
conversion from 'int' to 'char' changes value from 128 to -128
[-Wconstant-conversion]
app_info[1] = (EN50221_TAG_CA_INFO >> 8) & 0xff;
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
4 warnings generated.
Change app_info's type to unsigned char to match the type of the
member msg in struct ca_msg, which is the only thing passed into the
app_info parameter in this function.
Link: https://github.com/ClangBuiltLinux/linux/issues/105
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Christoph Hellwig [Sat, 13 Oct 2018 15:17:06 +0000 (11:17 -0400)]
media: sti/bdisp: don't pass GFP_DMA32 to dma_alloc_attrs
The DMA API does its own zone decisions based on the coherent_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
YueHaibing [Sat, 6 Oct 2018 07:36:02 +0000 (03:36 -0400)]
media: imx-pxp: remove duplicated include from imx-pxp.c
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Andrey Abramov [Mon, 1 Oct 2018 10:15:31 +0000 (06:15 -0400)]
media: Staging: media: replace deprecated probe method
Replaced i2c_driver::probe with i2c_driver::probe_new,
because documentation says that probe method is "soon to be deprecated".
Signed-off-by: Andrey Abramov <st5pub@yandex.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mauro Carvalho Chehab [Wed, 5 Dec 2018 10:02:33 +0000 (05:02 -0500)]
media: ddbridge: remove another duplicate of io.h and sort includes
The io.h was still included twice. Having a large number of
includes like that unsorted is likely the reason why we ended
by having 3 includes of io.h and two includes of interrupt.h
at the first place.
So, let's reorder the includes on alphabetic order. That would
make easier to maintain it.
Fixes:
12645e0655e4 ("media: ddbridge: remove some duplicated include file")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
zhong jiang [Thu, 20 Sep 2018 04:56:36 +0000 (00:56 -0400)]
media: ddbridge: remove some duplicated include file
interrupt.h and io.h have duplicated include. hence just remove
redundant file.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Marco Felsch [Tue, 18 Sep 2018 13:14:46 +0000 (09:14 -0400)]
media: tvp5150: fix irq_request error path during probe
Commit
37c65802e76a ("media: tvp5150: Add sync lock interrupt handling")
introduced the interrupt handling. But we have to free the
v4l2_ctrl_handler before we can return the error code.
Fixes:
37c65802e76a ("media: tvp5150: Add sync lock interrupt handling")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
zhong jiang [Tue, 18 Sep 2018 08:24:03 +0000 (04:24 -0400)]
media: remove redundant include moduleparam.h
module.h already contained moduleparam.h, so it is safe to remove
the redundant include.
The issue is detected with the help of Coccinelle.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Iliya Iliev [Sun, 12 Aug 2018 07:23:11 +0000 (03:23 -0400)]
media: drivers: media: pci: b2c2: Fix errors due to unappropriate coding style.
Fix error due to assignment in conditional expression.
Fix errors due to absence of empty spaces separators after commas in
function calls.
Fix errors due to lines longer than 80 characters.
Signed-off-by: Iliya Iliev <iliyailiev3592@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Corentin Labbe [Wed, 26 Sep 2018 11:44:20 +0000 (07:44 -0400)]
media: usb: dvb-usb: remove old friio driver
friio drivers is unused and un-compilable since
commit
b30cc07de8a9 ("media: dvb-usb/friio, dvb-usb-v2/gl861: decompose
friio and merge with gl861"). Let's remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Cc: Akihiro Tsukada <tskd2@yahoo.co.jp>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Malcolm Priestley [Thu, 29 Nov 2018 22:30:25 +0000 (17:30 -0500)]
media: lmedm04: use dvb_usbv2_generic_rw_locked
Use dvb-usb-v2 generic usb function for bulk transfers and simplify logic.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Malcolm Priestley [Thu, 29 Nov 2018 22:29:51 +0000 (17:29 -0500)]
media: lmedm04: Move usb buffer to lme2510_state.
lme2510_state exists for the entire duration of driver.
Move usb_buffer to lme2510_state removing the need for
lme2510_exit_int for removing the buffer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sean Young [Tue, 4 Dec 2018 09:59:10 +0000 (04:59 -0500)]
media: dib7000p: Remove dead code
Clang warns that 'interleaving' is assigned to itself in this function.
drivers/media/dvb-frontends/dib7000p.c:1874:15: warning: explicitly
assigning value of variable of type 'int' to itself [-Wself-assign]
interleaving = interleaving;
~~~~~~~~~~~~ ^ ~~~~~~~~~~~~
1 warning generated.
Just remove the self-assign and leave existing code in place for now.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Nikita Gerasimov [Wed, 26 Sep 2018 21:44:45 +0000 (17:44 -0400)]
media: rtl28xxu: add support for Sony CXD2837ER slave demod
Since 2018 some new revisions of RTL2832P based devices having
Sony CXD2837ER as a slave demodulator instead of Panasonic MN88473.
CXD2837ER handled in DVB_CXD2841ER module but it's has a lack of control.
So slave demod has to be reseted by GPIO0 before detecting to woke up
CXD2837ER.
Signed-off-by: Nikita Gerasimov <nikitych@yandex.ru>
Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Sat, 27 Jan 2018 23:43:01 +0000 (18:43 -0500)]
media: uvcvideo: Utilise for_each_uvc_urb iterator
A new iterator is available for processing UVC URB structures. This
simplifies the processing of the internal stream data.
Convert the manual loop iterators to the new helper, adding an index
helper to keep the existing debug print.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Mon, 5 Nov 2018 15:41:09 +0000 (10:41 -0500)]
media: uvcvideo: Rename uvc_{un,}init_video()
We have both uvc_init_video() and uvc_video_init() calls which can be
quite confusing to determine the process for each. Now that video
uvc_video_enable() has been renamed to uvc_video_start_streaming(),
adapt these calls to suit the new flow.
Rename uvc_init_video() to uvc_video_start_transfer() and
uvc_uninit_video() to uvc_video_stop_transfer().
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Mon, 5 Nov 2018 15:28:24 +0000 (10:28 -0500)]
media: uvcvideo: Split uvc_video_enable into two
uvc_video_enable() is used both to start and stop the video stream
object, however the single function entry point shares no code between
the two operations.
Split the function into two distinct calls, and rename to
uvc_video_start_streaming() and uvc_video_stop_streaming() as
appropriate.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Wed, 22 Mar 2017 09:42:52 +0000 (05:42 -0400)]
media: uvcvideo: Move decode processing to process context
Newer high definition cameras, and cameras with multiple lenses such as
the range of stereo-vision cameras now available have ever increasing
data rates.
The inclusion of a variable length packet header in URB packets mean
that we must memcpy the frame data out to our destination 'manually'.
This can result in data rates of up to 2 gigabits per second being
processed.
To improve efficiency, and maximise throughput, handle the URB decode
processing through a work queue to move it from interrupt context, and
allow multiple processors to work on URBs in parallel.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Fri, 9 Nov 2018 14:26:10 +0000 (09:26 -0500)]
media: uvcvideo: Abstract streaming object lifetime
The streaming object is a key part of handling the UVC device. Although
not critical, we are currently missing a call to destroy the mutex on
clean up paths, and we are due to extend the objects complexity in the
near future.
Facilitate easy management of a stream object by creating a pair of
functions to handle creating and destroying the allocation. The new
uvc_stream_delete() function also performs the missing mutex_destroy()
operation.
Previously a failed streaming object allocation would cause
uvc_parse_streaming() to return -EINVAL, which is inappropriate. If the
constructor failes, we will instead return -ENOMEM.
While we're here, fix the trivial spelling error in the function banner
of uvc_delete().
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Thu, 16 Mar 2017 13:33:05 +0000 (09:33 -0400)]
media: uvcvideo: queue: Support asynchronous buffer handling
The buffer queue interface currently operates sequentially, processing
buffers after they have fully completed.
In preparation for supporting parallel tasks operating on the buffers,
we will need to support buffers being processed on multiple CPUs.
Adapt the uvc_queue_next_buffer() such that a reference count tracks the
active use of the buffer, returning the buffer to the VB2 stack at
completion.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Wed, 3 Jan 2018 17:33:49 +0000 (12:33 -0500)]
media: uvcvideo: queue: Simplify spin-lock usage
Both uvc_start_streaming(), and uvc_stop_streaming() are called from
userspace context, with interrupts enabled. As such, they do not need to
save the IRQ state, and can use spin_lock_irq() and spin_unlock_irq()
respectively.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Thu, 23 Mar 2017 12:25:14 +0000 (08:25 -0400)]
media: uvcvideo: Protect queue internals with helper
The URB completion operation obtains the current buffer by reading
directly into the queue internal interface.
Protect this queue abstraction by providing a helper
uvc_queue_get_current_buffer() which can be used by both the decode
task, and the uvc_queue_next_buffer() functions.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Wed, 15 Mar 2017 09:39:14 +0000 (05:39 -0400)]
media: uvcvideo: Convert decode functions to use new context structure
The URB completion handlers currently reference the stream context.
Now that each URB has its own context structure, convert the decode (and
one encode) functions to utilise this context for URB management.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Kieran Bingham [Tue, 14 Mar 2017 22:03:23 +0000 (18:03 -0400)]
media: uvcvideo: Refactor URB descriptors
We currently store three separate arrays for each URB reference we hold.
Objectify the data needed to track URBs into a single uvc_urb structure,
allowing better object management and tracking of the URB.
All accesses to the data pointers through stream, are converted to use a
uvc_urb pointer for consistency.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Randy Dunlap [Fri, 30 Nov 2018 16:30:20 +0000 (11:30 -0500)]
media: seco-cec: add missing header file to fix build
Fix build errors due to missing <linux/module.h> header file.
The header file is inserted first because module-related errors
begin showing up in <linux/acpi.h> (when CONFIG_ACPI is not set).
Sample of build errors:
In file included from ../include/linux/acpi.h:27:0,
from ../drivers/media/platform/seco-cec/seco-cec.c:10:
../include/linux/device.h:1620:1: warning: data definition has no type or storage class [enabled by default]
module_exit(__driver##_exit);
^
../include/linux/platform_device.h:229:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^
../drivers/media/platform/seco-cec/seco-cec.c:791:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(secocec_driver);
^
../include/linux/device.h:1620:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
module_exit(__driver##_exit);
^
../include/linux/platform_device.h:229:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^
../drivers/media/platform/seco-cec/seco-cec.c:791:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(secocec_driver);
^
In file included from ../include/linux/linkage.h:7:0,
from ../include/linux/kernel.h:7,
from ../include/linux/list.h:9,
from ../include/linux/resource_ext.h:17,
from ../include/linux/acpi.h:26,
from ../drivers/media/platform/seco-cec/seco-cec.c:10:
../include/linux/export.h:18:30: warning: parameter names (without types) in function declaration [enabled by default]
#define THIS_MODULE ((struct module *)0)
^
../include/linux/platform_device.h:199:34: note: in expansion of macro 'THIS_MODULE'
__platform_driver_register(drv, THIS_MODULE)
^
../include/linux/device.h:1613:9: note: in expansion of macro 'platform_driver_register'
return __register(&(__driver) , ##__VA_ARGS__); \
^
../include/linux/platform_device.h:229:2: note: in expansion of macro 'module_driver'
module_driver(__platform_driver, platform_driver_register, \
^
../drivers/media/platform/seco-cec/seco-cec.c:791:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(secocec_driver);
^
../drivers/media/platform/seco-cec/seco-cec.c:793:20: error: expected declaration specifiers or '...' before string constant
MODULE_DESCRIPTION("SECO CEC X86 Driver");
^
../drivers/media/platform/seco-cec/seco-cec.c:794:15: error: expected declaration specifiers or '...' before string constant
MODULE_AUTHOR("Ettore Chimenti <ek5.chimenti@gmail.com>");
^
../drivers/media/platform/seco-cec/seco-cec.c:795:16: error: expected declaration specifiers or '...' before string constant
MODULE_LICENSE("Dual BSD/GPL");
^
In file included from ../include/linux/acpi.h:27:0,
from ../drivers/media/platform/seco-cec/seco-cec.c:10:
../drivers/media/platform/seco-cec/seco-cec.c:791:24: warning: 'secocec_driver_init' defined but not used [-Wunused-function]
module_platform_driver(secocec_driver);
^
../include/linux/device.h:1611:19: note: in definition of macro 'module_driver'
static int __init __driver##_init(void) \
^
../drivers/media/platform/seco-cec/seco-cec.c:791:1: note: in expansion of macro 'module_platform_driver'
module_platform_driver(secocec_driver);
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ettore Chimenti <ek5.chimenti@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Wed, 28 Nov 2018 16:34:51 +0000 (11:34 -0500)]
media: vicodec: move the GREY format to the end of the list
With the GREY format at the beginning, the default format selected
by vicodec would be GREY instead of YUV420. That didn't make sense,
so move it to the end of the list.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Colin Ian King [Wed, 28 Nov 2018 15:34:09 +0000 (10:34 -0500)]
media: tda7432: fix spelling mistake "maximium" -> "maximum"
There is a spelling mistake in the module description as well
as a comment. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Wed, 28 Nov 2018 09:11:52 +0000 (04:11 -0500)]
media: vivid: add req_validate error injection
Add a new vivid button control to inject an error into the
req_validate request callback.
This will help testing with v4l2-compliance.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jasmin Jessich [Mon, 26 Nov 2018 22:01:09 +0000 (17:01 -0500)]
media: adv7604 added include of linux/interrupt.h
On older Kernels (prior to 4.15) irqreturn_t and devm_request_threaded_irq
is not defined when compiling adv7604.c. It seems more recent Kernels
include it via another header which is included by adv7604.c.
Now we include linux/interrupt.h explicitly to get the type also defined
for Kernels prior to 4.15.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Michael Tretter [Mon, 26 Nov 2018 18:01:23 +0000 (13:01 -0500)]
media: v4l2-pci-skeleton: depend on CONFIG_SAMPLES
Commit
0185f8501762 ("[media] samples: v4l: from Documentation to
samples directory") moved the v4l2-pci-skeleton driver to the samples
directory. The samples are only be built, if CONFIG_SAMPLES is enabled.
Therefore, VIDEO_PCI_SKELETON is not enough to build the
v4l2-pci-skeleton driver, but SAMPLES needs to be enabled, too. Let
VIDEO_PCI_SKELETON depend on SAMPLES.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Michael Tretter [Mon, 26 Nov 2018 18:01:24 +0000 (13:01 -0500)]
media: v4l2-pci-skeleton: replace vb2_buffer with vb2_v4l2_buffer
Commit
2d7007153f0c ("[media] media: videobuf2: Restructure vb2_buffer")
replaced vb2_buffer with vb2_v4l2_buffer in all v4l2 drivers. The
restructuring skipped the v4l2-pci-skeleton, probably because it resides
outside the drivers directory.
The v4l2_buf_ops assume that the passed buffer is a vb2_v4l2_buffer.
This is not the case if the skel_buffer is based on vb2_buffer instead
of vb2_v4l2_buffer.
Replace vb2_buffer with vb2_v4l2_buffer in the skeleton to make sure
that future drivers that are based on the skeleton use vb2_v4l2_buffer.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Sakari Ailus [Mon, 26 Nov 2018 11:07:29 +0000 (06:07 -0500)]
media: v4l: ioctl: Allow drivers to fill in the format description
The v4l_fill_fmtdesc() function does a good job in filling in pixelformat
description. While generally all drivers should depend on this function
doing the job, staging drivers that use their own formats may not.
Allow staging drivers to fill in their own formats by checking whether the
description begins with a non-nil character before issuing the warning.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Jonas Karlman [Sun, 25 Nov 2018 15:21:42 +0000 (10:21 -0500)]
media: v4l: Fix MPEG-2 slice Intra DC Precision validation
intra_dc_precision is a 2-bit integer [1]
allow use of all valid options, 8 - 11 bits precision
[1] ISO/IEC 13818-2 Table 6-13
Fixes:
c27bb30e7b6d ("media: v4l: Add definitions for MPEG-2 slice format and metadata")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Alexey Khoroshilov [Fri, 23 Nov 2018 21:56:26 +0000 (16:56 -0500)]
media: DaVinci-VPBE: fix error handling in vpbe_initialize()
If vpbe_set_default_output() or vpbe_set_default_mode() fails,
vpbe_initialize() returns error code without releasing resources.
The patch adds error handling for that case.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hans Verkuil [Fri, 23 Nov 2018 12:07:33 +0000 (07:07 -0500)]
media: vivid: fix smatch warnings
Reorganize code to fix two smatch warnings:
drivers/media/platform/vivid/vivid-core.c: drivers/media/platform/vivid/vivid-core.c:889 vivid_create_instance() warn: potentially one past the end of array
'dev->query_dv_timings_qmenu[dev->query_dv_timings_size]'
drivers/media/platform/vivid/vivid-core.c: drivers/media/platform/vivid/vivid-core.c:889 vivid_create_instance() warn: potentially one past the end of array
'dev->query_dv_timings_qmenu[dev->query_dv_timings_size]'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>