platform/kernel/linux-rpi.git
4 years agommc: remove the call to check_disk_change
Christoph Hellwig [Wed, 8 Jul 2020 12:25:46 +0000 (14:25 +0200)]
mmc: remove the call to check_disk_change

The mmc driver doesn't support event notifications, which means
that check_disk_change is a no-op.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoxtensa/simdisk: remove the call to check_disk_change
Christoph Hellwig [Wed, 8 Jul 2020 12:25:45 +0000 (14:25 +0200)]
xtensa/simdisk: remove the call to check_disk_change

The simdisk driver doesn't support event notifications, which means
that check_disk_change is a no-op.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoisofs: remove a stale comment
Christoph Hellwig [Wed, 8 Jul 2020 12:25:44 +0000 (14:25 +0200)]
isofs: remove a stale comment

check_disk_change isn't for consumers of the block layer, so remove
the comment mentioning it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove flush_disk
Christoph Hellwig [Wed, 8 Jul 2020 12:25:43 +0000 (14:25 +0200)]
block: remove flush_disk

flush_disk has only two callers, so open code it there.  That also helps
clarifying the error message for the particular case, and allows to remove
setting bd_invalidated in check_disk_size_change, which will be cleared
again instantly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agocdrom: remove the unused cdrom_media_changed function
Christoph Hellwig [Wed, 8 Jul 2020 12:25:42 +0000 (14:25 +0200)]
cdrom: remove the unused cdrom_media_changed function

As well as the ->media_changed method.  All these are left over from
before the drivers were switched over to the check_events scheme.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agomd: switch to ->check_events for media change notifications
Christoph Hellwig [Wed, 8 Jul 2020 12:25:41 +0000 (14:25 +0200)]
md: switch to ->check_events for media change notifications

md is the last driver using the legacy media_changed method.  Switch
it over to (not so) new ->clear_events approach, which also removes the
need for the ->revalidate_disk method.

Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: remove unused 'bdops' variable in disk_clear_events()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: centralise related handling into blk_mq_get_driver_tag
Ming Lei [Mon, 6 Jul 2020 14:41:11 +0000 (22:41 +0800)]
blk-mq: centralise related handling into blk_mq_get_driver_tag

Move .nr_active update and request assignment into blk_mq_get_driver_tag(),
all are good to do during getting driver tag.

Meantime blk-flush related code is simplified and flush request needn't
to update the request table manually any more.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: streamline handling of q->mq_ops->queue_rq result
Ming Lei [Wed, 1 Jul 2020 13:58:57 +0000 (21:58 +0800)]
blk-mq: streamline handling of q->mq_ops->queue_rq result

Current handling of q->mq_ops->queue_rq result is a bit ugly:

- two branches which needs to 'continue' have to check if the
dispatch local list is empty, otherwise one bad request may
be retrieved via 'rq = list_first_entry(list, struct request, queuelist);'

- the branch of 'if (unlikely(ret != BLK_STS_OK))' isn't easy
to follow, since it is actually one error branch.

Streamline this handling, so the code becomes more readable, meantime
potential kernel oops can be avoided in case that the last request in
local dispatch list is failed.

Fixes: fc17b6534eb8 ("blk-mq: switch ->queue_rq return value to blk_status_t")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove a bogus warning in __submit_bio_noacct_mq
Christoph Hellwig [Tue, 7 Jul 2020 17:45:03 +0000 (19:45 +0200)]
block: remove a bogus warning in __submit_bio_noacct_mq

If blk_mq_submit_bio flushes the plug list, bios for other disks can
show up on current->bio_list.  As that doesn't involve any stacking of
block device it is entirely harmless and we should not warn about
this case.

Fixes: ff93ea0ce763 ("block: shortcut __submit_bio_noacct for blk-mq drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: initialize current->bio_list[1] in __submit_bio_noacct_mq
Christoph Hellwig [Thu, 2 Jul 2020 19:21:25 +0000 (21:21 +0200)]
block: initialize current->bio_list[1] in __submit_bio_noacct_mq

bio_alloc_bioset references current->bio_list[1], so we need to
initialize it for the blk-mq submission path as well.

Fixes: ff93ea0ce763 ("block: shortcut __submit_bio_noacct for blk-mq drivers")
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoRevert "blk-mq: put driver tag when this request is completed"
Jens Axboe [Thu, 2 Jul 2020 04:58:32 +0000 (22:58 -0600)]
Revert "blk-mq: put driver tag when this request is completed"

This reverts commits the following commits:

37f4a24c2469a10a4c16c641671bd766e276cf9f
723bf178f158abd1ce6069cb049581b3cb003aab
36a3df5a4574d5ddf59804fcd0c4e9654c514d9a

The last one is the culprit, but we have to go a bit deeper to get this
to revert cleanly. There's been a report that this breaks some MMC
setups [1], and also causes an issue with swap [2]. Until this can be
figured out, revert the offending commits.

[1] https://lore.kernel.org/linux-block/57fb09b1-54ba-f3aa-f82c-d709b0e6b281@samsung.com/
[2] https://lore.kernel.org/linux-block/20200702043721.GA1087@lca.pw/

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agodm: remove unused variable
Jens Axboe [Wed, 1 Jul 2020 21:45:19 +0000 (15:45 -0600)]
dm: remove unused variable

Since merging the commit identified in Fixes below, we trigger this
compile time warning:

drivers/md/dm.c: In function ‘__map_bio’:
drivers/md/dm.c:1296:24: warning: unused variable ‘md’ [-Wunused-variable]
 1296 |  struct mapped_device *md = io->md;
       |                        ^~

Remove the 'md' variable.

Fixes: 5a6c35f9af41 ("block: remove direct_make_request")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agosbitmap: Consider cleared bits in sbitmap_bitmap_show()
John Garry [Wed, 1 Jul 2020 08:06:25 +0000 (16:06 +0800)]
sbitmap: Consider cleared bits in sbitmap_bitmap_show()

sbitmap works by maintaining separate bitmaps of set and cleared bits.
The set bits are cleared in a batch, to save the burden of continuously
locking the "word" map to unset.

sbitmap_bitmap_show() only shows the set bits (in "word"), which is not
too much use, so mask out the cleared bits.

Fixes: ea86ea2cdced ("sbitmap: ammortize cost of clearing bits")
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove the all_bdevs list
Christoph Hellwig [Fri, 26 Jun 2020 08:01:58 +0000 (10:01 +0200)]
block: remove the all_bdevs list

Instead just iterate over the inodes for the block device superblock.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove the unused bd_private field from struct block_device
Christoph Hellwig [Fri, 26 Jun 2020 08:01:57 +0000 (10:01 +0200)]
block: remove the unused bd_private field from struct block_device

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove the bd_queue field from struct block_device
Christoph Hellwig [Fri, 26 Jun 2020 08:01:56 +0000 (10:01 +0200)]
block: remove the bd_queue field from struct block_device

Just use bd_disk->queue instead.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove the bd_block_size field from struct block_device
Christoph Hellwig [Fri, 26 Jun 2020 08:01:55 +0000 (10:01 +0200)]
block: remove the bd_block_size field from struct block_device

We can trivially calculate the block size from the inodes i_blkbits
variable.  Use that instead of keeping two redundant copies of the
information in slightly different formats.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: simplify set_init_blocksize
Christoph Hellwig [Fri, 26 Jun 2020 08:01:54 +0000 (10:01 +0200)]
block: simplify set_init_blocksize

The loop to increase the initial block size doesn't really make any
sense, as the AND operation won't match for powers of two if it didn't
for the initial block size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agodcssblk: don't set bd_block_size in ->open
Christoph Hellwig [Fri, 26 Jun 2020 08:01:53 +0000 (10:01 +0200)]
dcssblk: don't set bd_block_size in ->open

bd_block_size contains a value that matches the logic block size when
opening, so the statement is redundant.  Even if it wasn't the dumb
assignment would cause a a mismatch with bd_inode->i_blkbits.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agofloppy: use block_size
Christoph Hellwig [Fri, 26 Jun 2020 08:01:52 +0000 (10:01 +0200)]
floppy: use block_size

Use the block_size helper instead of open coding it.  Also remove the
check for a 0 block size, as that can't happen.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-iolatency: only call ktime_get() if needed
Hongnan Li [Wed, 1 Jul 2020 08:09:38 +0000 (16:09 +0800)]
blk-iolatency: only call ktime_get() if needed

ktime_to_ns(ktime_get()), which is expensive, does not need to be called
if blk_iolatency_enabled() return false in blkcg_iolatency_done_bio().
Postponing ktime_to_ns(ktime_get()) execution reduces the CPU usage when
blk_iolatency is disabled.

Signed-off-by: Hongnan Li <hongnan.li@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove direct_make_request
Christoph Hellwig [Wed, 1 Jul 2020 08:59:47 +0000 (10:59 +0200)]
block: remove direct_make_request

Now that submit_bio_noacct has a decent blk-mq fast path there is no
more need for this bypass.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: shortcut __submit_bio_noacct for blk-mq drivers
Christoph Hellwig [Wed, 1 Jul 2020 08:59:46 +0000 (10:59 +0200)]
block: shortcut __submit_bio_noacct for blk-mq drivers

For blk-mq drivers bios can only be inserted for the same queue.  So
bypass the complicated sorting logic in __submit_bio_noacct with
a blk-mq simpler submission helper.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: refator submit_bio_noacct
Christoph Hellwig [Wed, 1 Jul 2020 08:59:45 +0000 (10:59 +0200)]
block: refator submit_bio_noacct

Split out a __submit_bio_noacct helper for the actual de-recursion
algorithm, and simplify the loop by using a continue when we can't
enter the queue for a bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: rename generic_make_request to submit_bio_noacct
Christoph Hellwig [Wed, 1 Jul 2020 08:59:44 +0000 (10:59 +0200)]
block: rename generic_make_request to submit_bio_noacct

generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: move ->make_request_fn to struct block_device_operations
Christoph Hellwig [Wed, 1 Jul 2020 08:59:43 +0000 (10:59 +0200)]
block: move ->make_request_fn to struct block_device_operations

The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector.  Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does).  Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove the nr_sectors variable in generic_make_request_checks
Christoph Hellwig [Wed, 1 Jul 2020 08:59:42 +0000 (10:59 +0200)]
block: remove the nr_sectors variable in generic_make_request_checks

The variable is only used once, so just open code the bio_sector()
there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove the NULL queue check in generic_make_request_checks
Christoph Hellwig [Wed, 1 Jul 2020 08:59:41 +0000 (10:59 +0200)]
block: remove the NULL queue check in generic_make_request_checks

All registers disks must have a valid queue pointer, so don't bother to
log a warning for that case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: tidy up a warning in bio_check_ro
Christoph Hellwig [Wed, 1 Jul 2020 08:59:40 +0000 (10:59 +0200)]
block: tidy up a warning in bio_check_ro

The "generic_make_request: " prefix has no value, and will soon become
stale.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove the request_queue argument from blk_queue_split
Christoph Hellwig [Wed, 1 Jul 2020 08:59:39 +0000 (10:59 +0200)]
block: remove the request_queue argument from blk_queue_split

The queue can be trivially derived from the bio, so pass one less
argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agofs: remove a weird comment in submit_bh_wbc
Christoph Hellwig [Wed, 1 Jul 2020 08:59:38 +0000 (10:59 +0200)]
fs: remove a weird comment in submit_bh_wbc

All bios can get remapped if submitted to partitions.  No need to
comment on that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agodm: stop using ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:37 +0000 (10:59 +0200)]
dm: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agobcache: stop setting ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:36 +0000 (10:59 +0200)]
bcache: stop setting ->queuedata

Nothing in bcache actually uses the ->queuedata field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agozram: stop using ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:35 +0000 (10:59 +0200)]
zram: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoumem: stop using ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:34 +0000 (10:59 +0200)]
umem: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agorsxx: stop using ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:33 +0000 (10:59 +0200)]
rsxx: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agops3vram: stop using ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:32 +0000 (10:59 +0200)]
ps3vram: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agonull_blk: stop using ->queuedata for bio mode
Christoph Hellwig [Wed, 1 Jul 2020 08:59:31 +0000 (10:59 +0200)]
null_blk: stop using ->queuedata for bio mode

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agodrbd: stop using ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:30 +0000 (10:59 +0200)]
drbd: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agosimdisk: stop using ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:29 +0000 (10:59 +0200)]
simdisk: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agonfblock: stop using ->queuedata
Christoph Hellwig [Wed, 1 Jul 2020 08:59:28 +0000 (10:59 +0200)]
nfblock: stop using ->queuedata

Instead of setting up the queuedata as well just use one private data
field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: remove pointless call of list_entry_rq() in hctx_show_busy_rq()
Hou Tao [Mon, 27 Apr 2020 13:12:50 +0000 (21:12 +0800)]
blk-mq: remove pointless call of list_entry_rq() in hctx_show_busy_rq()

Just use rq directly, the usage of list_entry_rq() doesn't make any
sense.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-cgroup: clean up indentation
Colin Ian King [Tue, 30 Jun 2020 15:54:41 +0000 (16:54 +0100)]
blk-cgroup: clean up indentation

There is a statement that is indented one level too deeply, fix it
by removing a tab.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: centralise related handling into blk_mq_get_driver_tag
Ming Lei [Tue, 30 Jun 2020 14:03:57 +0000 (22:03 +0800)]
blk-mq: centralise related handling into blk_mq_get_driver_tag

Move .nr_active update and request assignment into blk_mq_get_driver_tag(),
all are good to do during getting driver tag.

Meantime blk-flush related code is simplified and flush request needn't
to update the request table manually any more.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: move blk_mq_put_driver_tag() into blk-mq.c
Ming Lei [Tue, 30 Jun 2020 14:03:56 +0000 (22:03 +0800)]
blk-mq: move blk_mq_put_driver_tag() into blk-mq.c

It is used by blk-mq.c only, so move it to the source file.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: move blk_mq_get_driver_tag into blk-mq.c
Ming Lei [Tue, 30 Jun 2020 14:03:55 +0000 (22:03 +0800)]
blk-mq: move blk_mq_get_driver_tag into blk-mq.c

blk_mq_get_driver_tag() is only used by blk-mq.c and is supposed to
stay in blk-mq.c, so move it and preparing for cleanup code of
get/put driver tag.

Meantime hctx_may_queue() is moved to header file and it is fine
since it is defined as inline always.

No functional change.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: support batching dispatch in case of io
Ming Lei [Tue, 30 Jun 2020 10:25:01 +0000 (18:25 +0800)]
blk-mq: support batching dispatch in case of io

More and more drivers want to get batching requests queued from
block layer, such as mmc, and tcp based storage drivers. Also
current in-tree users have virtio-scsi, virtio-blk and nvme.

For none, we already support batching dispatch.

But for io scheduler, every time we just take one request from scheduler
and pass the single request to blk_mq_dispatch_rq_list(). This way makes
batching dispatch not possible when io scheduler is applied. One reason
is that we don't want to hurt sequential IO performance, becasue IO
merge chance is reduced if more requests are dequeued from scheduler
queue.

Try to support batching dispatch for io scheduler by starting with the
following simple approach:

1) still make sure we can get budget before dequeueing request

2) use hctx->dispatch_busy to evaluate if queue is busy, if it is busy
we fackback to non-batching dispatch, otherwise dequeue as many as
possible requests from scheduler, and pass them to blk_mq_dispatch_rq_list().

Wrt. 2), we use similar policy for none, and turns out that SCSI SSD
performance got improved much.

In future, maybe we can develop more intelligent algorithem for batching
dispatch.

Baolin has tested this patch and found that MMC performance is improved[3].

[1] https://lore.kernel.org/linux-block/20200512075501.GF1531898@T590/#r
[2] https://lore.kernel.org/linux-block/fe6bd8b9-6ed9-b225-f80c-314746133722@grimberg.me/
[3] https://lore.kernel.org/linux-block/CADBw62o9eTQDJ9RvNgEqSpXmg6Xcq=2TxH0Hfxhp29uF2W=TXA@mail.gmail.com/

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: pass obtained budget count to blk_mq_dispatch_rq_list
Ming Lei [Tue, 30 Jun 2020 10:25:00 +0000 (18:25 +0800)]
blk-mq: pass obtained budget count to blk_mq_dispatch_rq_list

Pass obtained budget count to blk_mq_dispatch_rq_list(), and prepare
for supporting fully batching submission.

With the obtained budget count, it is easier to put extra budgets
in case of .queue_rq failure.

Meantime remove the old 'got_budget' parameter.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: remove dead check from blk_mq_dispatch_rq_list
Ming Lei [Tue, 30 Jun 2020 10:24:59 +0000 (18:24 +0800)]
blk-mq: remove dead check from blk_mq_dispatch_rq_list

When BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE is returned from
.queue_rq, the 'list' variable always holds this rq which isn't
queued to LLD successfully.

So blk_mq_dispatch_rq_list() always returns false from the branch
of '!list_empty(list)'.

No functional change.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: move getting driver tag and budget into one helper
Ming Lei [Tue, 30 Jun 2020 10:24:58 +0000 (18:24 +0800)]
blk-mq: move getting driver tag and budget into one helper

Move code for getting driver tag and budget into one helper, so
blk_mq_dispatch_rq_list gets a bit simplified, and easier to read.

Meantime move updating of 'no_tag' and 'no_budget_available' into
the branch for handling partial dispatch because that is exactly
consumer of the two local variables.

Also rename the parameter of 'got_budget' as 'ask_budget'.

No functional change.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: pass hctx to blk_mq_dispatch_rq_list
Ming Lei [Tue, 30 Jun 2020 10:24:57 +0000 (18:24 +0800)]
blk-mq: pass hctx to blk_mq_dispatch_rq_list

All requests in the 'list' of blk_mq_dispatch_rq_list belong to same
hctx, so it is better to pass hctx instead of request queue, because
blk-mq's dispatch target is hctx instead of request queue.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: pass request queue into get/put budget callback
Ming Lei [Tue, 30 Jun 2020 10:24:56 +0000 (18:24 +0800)]
blk-mq: pass request queue into get/put budget callback

blk-mq budget is abstract from scsi's device queue depth, and it is
always per-request-queue instead of hctx.

It can be quite absurd to get a budget from one hctx, then dequeue a
request from scheduler queue, and this request may not belong to this
hctx, at least for bfq and deadline.

So fix the mess and always pass request queue to get/put budget
callback.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: remove the BLK_MQ_REQ_INTERNAL flag
Christoph Hellwig [Mon, 29 Jun 2020 15:08:34 +0000 (17:08 +0200)]
blk-mq: remove the BLK_MQ_REQ_INTERNAL flag

Just check for a non-NULL elevator directly to make the code more clear.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: put driver tag when this request is completed
Ming Lei [Mon, 29 Jun 2020 09:47:59 +0000 (17:47 +0800)]
blk-mq: put driver tag when this request is completed

It is natural to release driver tag when this request is completed by
LLD or device since its purpose is for LLD use.

One big benefit is that the released tag can be re-used quicker since
bio_endio() may take too long.

Meantime we don't need to release driver tag for flush request.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-cgroup: remove a dead check in blk_throtl_bio
Christoph Hellwig [Sat, 27 Jun 2020 07:31:59 +0000 (09:31 +0200)]
blk-cgroup: remove a dead check in blk_throtl_bio

bios must have a valid block group by the time they are submitted.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-cgroup: remove blkcg_bio_issue_check
Christoph Hellwig [Sat, 27 Jun 2020 07:31:58 +0000 (09:31 +0200)]
blk-cgroup: remove blkcg_bio_issue_check

blkcg_bio_issue_check is a giant inline function that does three entirely
different things.  Factor out the blk-cgroup related bio initalization
into a new helper, and the open code the sequence in the only caller,
relying on the fact that all the actual functionality is stubbed out for
non-cgroup builds.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-cgroup: move rcu locking from blkcg_bio_issue_check to blk_throtl_bio
Christoph Hellwig [Sat, 27 Jun 2020 07:31:57 +0000 (09:31 +0200)]
blk-cgroup: move rcu locking from blkcg_bio_issue_check to blk_throtl_bio

The only thing in blkcg_bio_issue_check that needs to be under
rcu_read_lock is blk_throtl_bio, so move the locking there.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agocgroup: unexport cgroup_rstat_updated
Christoph Hellwig [Sat, 27 Jun 2020 07:31:56 +0000 (09:31 +0200)]
cgroup: unexport cgroup_rstat_updated

cgroup_rstat_updated is only used by core block code, no need to
export it.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-cgroup: remove the !bio->bi_blkg check in blkcg_bio_issue_check
Christoph Hellwig [Sat, 27 Jun 2020 07:31:55 +0000 (09:31 +0200)]
blk-cgroup: remove the !bio->bi_blkg check in blkcg_bio_issue_check

This is purely a sanity check for grave programming errors.  Remove it
to simplify further work in this area.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: move the initial blkg lookup into blkg_tryget_closest
Christoph Hellwig [Sat, 27 Jun 2020 07:31:54 +0000 (09:31 +0200)]
block: move the initial blkg lookup into blkg_tryget_closest

By moving the initial blkg lookup into blkg_tryget_closest we get
a nicely self contained routines that does all the RCU locking.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: bypass blkg_tryget_closest for the root_blkg
Christoph Hellwig [Sat, 27 Jun 2020 07:31:53 +0000 (09:31 +0200)]
block: bypass blkg_tryget_closest for the root_blkg

The root_blkg is only torn down at the very end of removing a queue.
So in the I/O submission path is always has a life reference and we
can just grab another one using blkg_get instead of doing a tryget
and parent walk that won't lead anywhere.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: merge blkg_lookup_create and __blkg_lookup_create
Christoph Hellwig [Sat, 27 Jun 2020 07:31:52 +0000 (09:31 +0200)]
block: merge blkg_lookup_create and __blkg_lookup_create

No good reason to keep these two functions split.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: move the bio cgroup associatation helpers to blk-cgroup.c
Christoph Hellwig [Sat, 27 Jun 2020 07:31:51 +0000 (09:31 +0200)]
block: move the bio cgroup associatation helpers to blk-cgroup.c

Keep the cgroup code together.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: move bio_associate_blkg_from_page to mm/page_io.c
Christoph Hellwig [Sat, 27 Jun 2020 07:31:50 +0000 (09:31 +0200)]
block: move bio_associate_blkg_from_page to mm/page_io.c

bio_associate_blkg_from_page is a special purpose helper for swap bios
that doesn't need access to bio internals.  Move it to the swap code
instead of having it in bio.c.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: merge __bio_associate_blkg into bio_associate_blkg_from_css
Christoph Hellwig [Sat, 27 Jun 2020 07:31:49 +0000 (09:31 +0200)]
block: merge __bio_associate_blkg into bio_associate_blkg_from_css

Merge __bio_associate_blkg into the only caller, which allows to slightly
reduce the RCU crticial section and better explain the code flow.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: really clone the block cgroup in bio_clone_blkg_association
Christoph Hellwig [Sat, 27 Jun 2020 07:31:48 +0000 (09:31 +0200)]
block: really clone the block cgroup in bio_clone_blkg_association

bio_clone_blkg_association is supposed to clone the associatation, but
actually ends up doing a search with a tryget.  As we know we have a
reference on the source cgroup just get an unconditional additional
reference to it and call it a day.  That also removes the need for
a RCU critical section.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: remove bio_disassociate_blkg
Christoph Hellwig [Sat, 27 Jun 2020 07:31:47 +0000 (09:31 +0200)]
block: remove bio_disassociate_blkg

bio_disassociate_blkg has two callers, of which one immediately assigns
a new value to >bi_blkg.  Just open code the function in the two callers.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agodm: use bio_uninit instead of bio_disassociate_blkg
Christoph Hellwig [Sat, 27 Jun 2020 07:31:46 +0000 (09:31 +0200)]
dm: use bio_uninit instead of bio_disassociate_blkg

bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail.  Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.

Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-rq-qos: remove redundant finish_wait to rq_qos_wait.
Guo Xuenan [Sun, 28 Jun 2020 13:56:25 +0000 (09:56 -0400)]
blk-rq-qos: remove redundant finish_wait to rq_qos_wait.

It is no need do finish_wait twice after acquiring inflight.

Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblktrace: Provide event for request merging
Jan Kara [Wed, 17 Jun 2020 13:58:23 +0000 (15:58 +0200)]
blktrace: Provide event for request merging

Currently blk-mq does not report any event when two requests get merged
in the elevator. This then results in difficult to understand sequence
of events like:

...
  8,0   34     1579     0.608765271  2718  I  WS 215023504 + 40 [dbench]
  8,0   34     1584     0.609184613  2719  A  WS 215023544 + 56 <- (8,4) 2160568
  8,0   34     1585     0.609184850  2719  Q  WS 215023544 + 56 [dbench]
  8,0   34     1586     0.609188524  2719  G  WS 215023544 + 56 [dbench]
  8,0    3      602     0.609684162   773  D  WS 215023504 + 96 [kworker/3:1H]
  8,0   34     1591     0.609843593     0  C  WS 215023504 + 96 [0]

and you can only guess (after quite some headscratching since the above
excerpt is intermixed with a lot of other IO) that request 215023544+56
got merged to request 215023504+40. Provide proper event for request
merging like we used to do in the legacy block layer.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: move struct block_device to blk_types.h
Christoph Hellwig [Sat, 20 Jun 2020 07:16:44 +0000 (09:16 +0200)]
block: move struct block_device to blk_types.h

Move the struct block_device definition together with most of the
block layer definitions, as it has nothing to do with the rest of fs.h.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: reduce ifdef CONFIG_BLOCK madness in headers
Christoph Hellwig [Sat, 20 Jun 2020 07:16:43 +0000 (09:16 +0200)]
block: reduce ifdef CONFIG_BLOCK madness in headers

Large part of bio.h, blkdev.h and genhd.h are under ifdef CONFIG_BLOCK
for no good reason.  Only stub out function that are called from
code that is not dependent on CONFIG_BLOCK and leave the harmless
other declarations around.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agofs: move the buffer_heads_over_limit stub to buffer_head.h
Christoph Hellwig [Sat, 20 Jun 2020 07:16:42 +0000 (09:16 +0200)]
fs: move the buffer_heads_over_limit stub to buffer_head.h

Move the !CONFIG_BLOCK stub to the same place as the non-stub
declaration.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: move block-related definitions out of fs.h
Christoph Hellwig [Sat, 20 Jun 2020 07:16:41 +0000 (09:16 +0200)]
block: move block-related definitions out of fs.h

Move most of the block related definition out of fs.h into more suitable
headers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: simplify sb_is_blkdev_sb
Christoph Hellwig [Sat, 20 Jun 2020 07:16:40 +0000 (09:16 +0200)]
block: simplify sb_is_blkdev_sb

Just use IS_ENABLED instead of providing a stub for !CONFIG_BLOCK.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agofs: remove the mount_bdev and kill_block_super stubs
Christoph Hellwig [Sat, 20 Jun 2020 07:16:39 +0000 (09:16 +0200)]
fs: remove the mount_bdev and kill_block_super stubs

No one calls these functions without CONFIG_BLOCK, so don't bother
stubbing them out.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agofs: remove the HAVE_UNLOCKED_IOCTL and HAVE_COMPAT_IOCTL defines
Christoph Hellwig [Sat, 20 Jun 2020 07:16:38 +0000 (09:16 +0200)]
fs: remove the HAVE_UNLOCKED_IOCTL and HAVE_COMPAT_IOCTL defines

These are not defined anywhere, and contrary to the comments we really
do not care about out of tree code at all.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agofs: remove an unused block_device_operations forward declaration
Christoph Hellwig [Sat, 20 Jun 2020 07:16:37 +0000 (09:16 +0200)]
fs: remove an unused block_device_operations forward declaration

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: mark bd_finish_claiming static
Christoph Hellwig [Sat, 20 Jun 2020 07:16:36 +0000 (09:16 +0200)]
block: mark bd_finish_claiming static

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agotty/sysrq: emergency_thaw_all does not depend on CONFIG_BLOCK
Christoph Hellwig [Sat, 20 Jun 2020 07:16:35 +0000 (09:16 +0200)]
tty/sysrq: emergency_thaw_all does not depend on CONFIG_BLOCK

We can also thaw non-block file systems.  Remove the CONFIG_BLOCK in
sysrq.c after making the prototype available unconditionally.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agonvme-rdma: fix a missing completion with remove invalidation
Christoph Hellwig [Tue, 23 Jun 2020 16:22:39 +0000 (18:22 +0200)]
nvme-rdma: fix a missing completion with remove invalidation

Revert and incorret transformation that caused requests using remote
invalidation to never complete.

Fixes: 421147be863b ("nvme-rdma: factor out a nvme_rdma_end_request helper")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-iocost: Use struct_size() in kzalloc_node()
Gustavo A. R. Silva [Fri, 19 Jun 2020 23:08:30 +0000 (18:08 -0500)]
blk-iocost: Use struct_size() in kzalloc_node()

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: bio: Use struct_size() in kmalloc()
Gustavo A. R. Silva [Sat, 20 Jun 2020 00:49:49 +0000 (19:49 -0500)]
block: bio: Use struct_size() in kmalloc()

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle and, audited and
fixed manually.

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: create the request_queue debugfs_dir on registration
Luis Chamberlain [Fri, 19 Jun 2020 20:47:30 +0000 (20:47 +0000)]
block: create the request_queue debugfs_dir on registration

We were only creating the request_queue debugfs_dir only
for make_request block drivers (multiqueue), but never for
request-based block drivers. We did this as we were only
creating non-blktrace additional debugfs files on that directory
for make_request drivers. However, since blktrace *always* creates
that directory anyway, we special-case the use of that directory
on blktrace. Other than this being an eye-sore, this exposes
request-based block drivers to the same debugfs fragile
race that used to exist with make_request block drivers
where if we start adding files onto that directory we can later
run a race with a double removal of dentries on the directory
if we don't deal with this carefully on blktrace.

Instead, just simplify things by always creating the request_queue
debugfs_dir on request_queue registration. Rename the mutex also to
reflect the fact that this is used outside of the blktrace context.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblktrace: ensure our debugfs dir exists
Luis Chamberlain [Fri, 19 Jun 2020 20:47:29 +0000 (20:47 +0000)]
blktrace: ensure our debugfs dir exists

We make an assumption that a debugfs directory exists, but since
this can fail ensure it exists before allowing blktrace setup to
complete. Otherwise we end up stuffing blktrace files on the debugfs
root directory. In the worst case scenario this *in theory* can create
an eventual panic *iff* in the future a similarly named file is created
prior on the debugfs root directory. This theoretical crash can happen
due to a recursive removal followed by a specific dentry removal.

This doesn't fix any known crash, however I have seen the files
go into the main debugfs root directory in cases where the debugfs
directory was not created due to other internal bugs with blktrace
now fixed.

blktrace is also completely useless without this directory, so
this ensures to userspace we only setup blktrace if the kernel
can stuff files where they are supposed to go into.

debugfs directory creations typically aren't checked for, and we have
maintainers doing sweep removals of these checks, but since we need this
check to ensure proper userspace blktrace functionality we make sure
to annotate the justification for the check.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblktrace: fix debugfs use after free
Luis Chamberlain [Fri, 19 Jun 2020 20:47:28 +0000 (20:47 +0000)]
blktrace: fix debugfs use after free

On commit 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
merged on v4.12 Omar fixed the original blktrace code for request-based
drivers (multiqueue). This however left in place a possible crash, if you
happen to abuse blktrace while racing to remove / add a device.

We used to use asynchronous removal of the request_queue, and with that
the issue was easier to reproduce. Now that we have reverted to
synchronous removal of the request_queue, the issue is still possible to
reproduce, its however just a bit more difficult.

We essentially run two instances of break-blktrace which add/remove
a loop device, and setup a blktrace and just never tear the blktrace
down. We do this twice in parallel. This is easily reproduced with the
script run_0004.sh from break-blktrace [0].

We can end up with two types of panics each reflecting where we
race, one a failed blktrace setup:

[  252.426751] debugfs: Directory 'loop0' with parent 'block' already present!
[  252.432265] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[  252.436592] #PF: supervisor write access in kernel mode
[  252.439822] #PF: error_code(0x0002) - not-present page
[  252.442967] PGD 0 P4D 0
[  252.444656] Oops: 0002 [#1] SMP NOPTI
[  252.446972] CPU: 10 PID: 1153 Comm: break-blktrace Tainted: G            E     5.7.0-rc2-next-20200420+ #164
[  252.452673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[  252.456343] RIP: 0010:down_write+0x15/0x40
[  252.458146] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
               cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
               00 00 <f0> 48 0f b1 55 00 75 0f 48 8b 04 25 c0 8b 01 00 48 89
               45 08 5d
[  252.463638] RSP: 0018:ffffa626415abcc8 EFLAGS: 00010246
[  252.464950] RAX: 0000000000000000 RBX: ffff958c25f0f5c0 RCX: ffffff8100000000
[  252.466727] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[  252.468482] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000001
[  252.470014] R10: 0000000000000000 R11: ffff958d1f9227ff R12: 0000000000000000
[  252.471473] R13: ffff958c25ea5380 R14: ffffffff8cce15f1 R15: 00000000000000a0
[  252.473346] FS:  00007f2e69dee540(0000) GS:ffff958c2fc80000(0000) knlGS:0000000000000000
[  252.475225] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  252.476267] CR2: 00000000000000a0 CR3: 0000000427d10004 CR4: 0000000000360ee0
[  252.477526] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  252.478776] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  252.479866] Call Trace:
[  252.480322]  simple_recursive_removal+0x4e/0x2e0
[  252.481078]  ? debugfs_remove+0x60/0x60
[  252.481725]  ? relay_destroy_buf+0x77/0xb0
[  252.482662]  debugfs_remove+0x40/0x60
[  252.483518]  blk_remove_buf_file_callback+0x5/0x10
[  252.484328]  relay_close_buf+0x2e/0x60
[  252.484930]  relay_open+0x1ce/0x2c0
[  252.485520]  do_blk_trace_setup+0x14f/0x2b0
[  252.486187]  __blk_trace_setup+0x54/0xb0
[  252.486803]  blk_trace_ioctl+0x90/0x140
[  252.487423]  ? do_sys_openat2+0x1ab/0x2d0
[  252.488053]  blkdev_ioctl+0x4d/0x260
[  252.488636]  block_ioctl+0x39/0x40
[  252.489139]  ksys_ioctl+0x87/0xc0
[  252.489675]  __x64_sys_ioctl+0x16/0x20
[  252.490380]  do_syscall_64+0x52/0x180
[  252.491032]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

And the other on the device removal:

[  128.528940] debugfs: Directory 'loop0' with parent 'block' already present!
[  128.615325] BUG: kernel NULL pointer dereference, address: 00000000000000a0
[  128.619537] #PF: supervisor write access in kernel mode
[  128.622700] #PF: error_code(0x0002) - not-present page
[  128.625842] PGD 0 P4D 0
[  128.627585] Oops: 0002 [#1] SMP NOPTI
[  128.629871] CPU: 12 PID: 544 Comm: break-blktrace Tainted: G            E     5.7.0-rc2-next-20200420+ #164
[  128.635595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[  128.640471] RIP: 0010:down_write+0x15/0x40
[  128.643041] Code: eb ca e8 ae 22 8d ff cc cc cc cc cc cc cc cc cc cc cc cc
               cc cc 0f 1f 44 00 00 55 48 89 fd e8 52 db ff ff 31 c0 ba 01 00
               00 00 <f0> 48 0f b1 55 00 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89
               45 08 5d
[  128.650180] RSP: 0018:ffffa9c3c05ebd78 EFLAGS: 00010246
[  128.651820] RAX: 0000000000000000 RBX: ffff8ae9a6370240 RCX: ffffff8100000000
[  128.653942] RDX: 0000000000000001 RSI: ffffff8100000000 RDI: 00000000000000a0
[  128.655720] RBP: 00000000000000a0 R08: 0000000000000002 R09: ffff8ae9afd2d3d0
[  128.657400] R10: 0000000000000056 R11: 0000000000000000 R12: 0000000000000000
[  128.659099] R13: 0000000000000000 R14: 0000000000000003 R15: 00000000000000a0
[  128.660500] FS:  00007febfd995540(0000) GS:ffff8ae9afd00000(0000) knlGS:0000000000000000
[  128.662204] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  128.663426] CR2: 00000000000000a0 CR3: 0000000420042003 CR4: 0000000000360ee0
[  128.664776] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  128.666022] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  128.667282] Call Trace:
[  128.667801]  simple_recursive_removal+0x4e/0x2e0
[  128.668663]  ? debugfs_remove+0x60/0x60
[  128.669368]  debugfs_remove+0x40/0x60
[  128.669985]  blk_trace_free+0xd/0x50
[  128.670593]  __blk_trace_remove+0x27/0x40
[  128.671274]  blk_trace_shutdown+0x30/0x40
[  128.671935]  blk_release_queue+0x95/0xf0
[  128.672589]  kobject_put+0xa5/0x1b0
[  128.673188]  disk_release+0xa2/0xc0
[  128.673786]  device_release+0x28/0x80
[  128.674376]  kobject_put+0xa5/0x1b0
[  128.674915]  loop_remove+0x39/0x50 [loop]
[  128.675511]  loop_control_ioctl+0x113/0x130 [loop]
[  128.676199]  ksys_ioctl+0x87/0xc0
[  128.676708]  __x64_sys_ioctl+0x16/0x20
[  128.677274]  do_syscall_64+0x52/0x180
[  128.677823]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The common theme here is:

debugfs: Directory 'loop0' with parent 'block' already present

This crash happens because of how blktrace uses the debugfs directory
where it places its files. Upon init we always create the same directory
which would be needed by blktrace but we only do this for make_request
drivers (multiqueue) block drivers. When you race a removal of these
devices with a blktrace setup you end up in a situation where the
make_request recursive debugfs removal will sweep away the blktrace
files and then later blktrace will also try to remove individual
dentries which are already NULL. The inverse is also possible and hence
the two types of use after frees.

We don't create the block debugfs directory on init for these types of
block devices:

  * request-based block driver block devices
  * every possible partition
  * scsi-generic

And so, this race should in theory only be possible with make_request
drivers.

We can fix the UAF by simply re-using the debugfs directory for
make_request drivers (multiqueue) and only creating the ephemeral
directory for the other type of block devices. The new clarifications
on relying on the q->blk_trace_mutex *and* also checking for q->blk_trace
*prior* to processing a blktrace ensures the debugfs directories are
only created if no possible directory name clashes are possible.

This goes tested with:

  o nvme partitions
  o ISCSI with tgt, and blktracing against scsi-generic with:
    o block
    o tape
    o cdrom
    o media changer
  o blktests

This patch is part of the work which disputes the severity of
CVE-2019-19770 which shows this issue is not a core debugfs issue, but
a misuse of debugfs within blktace.

Fixes: 6ac93117ab00 ("blktrace: use existing disk debugfs directory")
Reported-by: syzbot+603294af2d01acfdd6da@syzkaller.appspotmail.com
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoloop: be paranoid on exit and prevent new additions / removals
Luis Chamberlain [Fri, 19 Jun 2020 20:47:27 +0000 (20:47 +0000)]
loop: be paranoid on exit and prevent new additions / removals

Be pedantic on removal as well and hold the mutex.
This should prevent uses of addition while we exit.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblktrace: annotate required lock on do_blk_trace_setup()
Luis Chamberlain [Fri, 19 Jun 2020 20:47:26 +0000 (20:47 +0000)]
blktrace: annotate required lock on do_blk_trace_setup()

Ensure it is clear which lock is required on do_blk_trace_setup().

Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: revert back to synchronous request_queue removal
Luis Chamberlain [Fri, 19 Jun 2020 20:47:25 +0000 (20:47 +0000)]
block: revert back to synchronous request_queue removal

Commit dc9edc44de6c ("block: Fix a blk_exit_rl() regression") merged on
v4.12 moved the work behind blk_release_queue() into a workqueue after a
splat floated around which indicated some work on blk_release_queue()
could sleep in blk_exit_rl(). This splat would be possible when a driver
called blk_put_queue() or blk_cleanup_queue() (which calls blk_put_queue()
as its final call) from an atomic context.

blk_put_queue() decrements the refcount for the request_queue kobject, and
upon reaching 0 blk_release_queue() is called. Although blk_exit_rl() is
now removed through commit db6d99523560 ("block: remove request_list code")
on v5.0, we reserve the right to be able to sleep within
blk_release_queue() context.

The last reference for the request_queue must not be called from atomic
context. *When* the last reference to the request_queue reaches 0 varies,
and so let's take the opportunity to document when that is expected to
happen and also document the context of the related calls as best as
possible so we can avoid future issues, and with the hopes that the
synchronous request_queue removal sticks.

We revert back to synchronous request_queue removal because asynchronous
removal creates a regression with expected userspace interaction with
several drivers. An example is when removing the loopback driver, one
uses ioctls from userspace to do so, but upon return and if successful,
one expects the device to be removed. Likewise if one races to add another
device the new one may not be added as it is still being removed. This was
expected behavior before and it now fails as the device is still present
and busy still. Moving to asynchronous request_queue removal could have
broken many scripts which relied on the removal to have been completed if
there was no error. Document this expectation as well so that this
doesn't regress userspace again.

Using asynchronous request_queue removal however has helped us find
other bugs. In the future we can test what could break with this
arrangement by enabling CONFIG_DEBUG_KOBJECT_RELEASE.

While at it, update the docs with the context expectations for the
request_queue / gendisk refcount decrement, and make these
expectations explicit by using might_sleep().

Fixes: dc9edc44de6c ("block: Fix a blk_exit_rl() regression")
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: yu kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: clarify context for refcount increment helpers
Luis Chamberlain [Fri, 19 Jun 2020 20:47:24 +0000 (20:47 +0000)]
block: clarify context for refcount increment helpers

Let us clarify the context under which the helpers to increment the
refcount for the gendisk and request_queue can be called under. We
make this explicit on the places where we may sleep with might_sleep().

We don't address the decrement context yet, as that needs some extra
work and fixes, but will be addressed in the next patch.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblock: add docs for gendisk / request_queue refcount helpers
Luis Chamberlain [Fri, 19 Jun 2020 20:47:23 +0000 (20:47 +0000)]
block: add docs for gendisk / request_queue refcount helpers

This adds documentation for the gendisk / request_queue refcount
helpers.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agonvme: use blk_mq_complete_request_remote to avoid an indirect function call
Christoph Hellwig [Thu, 11 Jun 2020 06:44:52 +0000 (08:44 +0200)]
nvme: use blk_mq_complete_request_remote to avoid an indirect function call

Use the new blk_mq_complete_request_remote helper to avoid an indirect
function call in the completion fast path.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agonvme-rdma: factor out a nvme_rdma_end_request helper
Christoph Hellwig [Thu, 11 Jun 2020 06:44:51 +0000 (08:44 +0200)]
nvme-rdma: factor out a nvme_rdma_end_request helper

Factor a small sniplet of duplicated code into a new helper in
preparation for making this sniplet a little bit less trivial.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: add a new blk_mq_complete_request_remote API
Christoph Hellwig [Thu, 11 Jun 2020 06:44:50 +0000 (08:44 +0200)]
blk-mq: add a new blk_mq_complete_request_remote API

This is a variant of blk_mq_complete_request_remote that only completes
the request if it needs to be bounced to another CPU or a softirq.  If
the request can be completed locally the function returns false and lets
the driver complete it without requring and indirect function call.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: factor out a blk_mq_complete_need_ipi helper
Christoph Hellwig [Thu, 11 Jun 2020 06:44:49 +0000 (08:44 +0200)]
blk-mq: factor out a blk_mq_complete_need_ipi helper

Add a helper to decide if we can complete locally or need an IPI.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: remove the get_cpu/put_cpu pair in blk_mq_complete_request
Christoph Hellwig [Thu, 11 Jun 2020 06:44:48 +0000 (08:44 +0200)]
blk-mq: remove the get_cpu/put_cpu pair in blk_mq_complete_request

We don't really care if we get migrated during the I/O completion.
In the worth case we either perform an IPI that wasn't required, or
complete the request on a CPU which we just migrated off.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: move failure injection out of blk_mq_complete_request
Christoph Hellwig [Thu, 11 Jun 2020 06:44:47 +0000 (08:44 +0200)]
blk-mq: move failure injection out of blk_mq_complete_request

Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: merge the softirq vs non-softirq IPI logic
Christoph Hellwig [Thu, 11 Jun 2020 06:44:46 +0000 (08:44 +0200)]
blk-mq: merge the softirq vs non-softirq IPI logic

Both the softirq path for single queue devices and the multi-queue
completion handler share the same logic to figure out if we need an
IPI for the completion and eventually issue it.  Merge the two
versions into a single unified code path.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: short cut the IPI path in blk_mq_force_complete_rq for !SMP
Christoph Hellwig [Thu, 11 Jun 2020 06:44:45 +0000 (08:44 +0200)]
blk-mq: short cut the IPI path in blk_mq_force_complete_rq for !SMP

Let the compile optimize out the entire IPI path, given that we are
obviously not going to use it.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
4 years agoblk-mq: complete polled requests directly
Christoph Hellwig [Thu, 11 Jun 2020 06:44:44 +0000 (08:44 +0200)]
blk-mq: complete polled requests directly

Even for single queue devices there is no point in offloading a polled
completion to the softirq, given that blk_mq_force_complete_rq is called
from the polling thread in that case and thus there are no starvation
issues.

Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>