Thibault Saunier [Sun, 22 Apr 2018 13:40:19 +0000 (10:40 -0300)]
jpegenc: Accept sof-marker=4
sof-marker is 4 when input is in the RGB colorspace.
https://bugzilla.gnome.org/show_bug.cgi?id=795463
Mathieu Duponchelle [Mon, 2 Apr 2018 14:06:35 +0000 (16:06 +0200)]
ulpfecdec: output perfect seqnums
ULP FEC, as defined in RFC 5109, has the protected and protection
packets sharing the same ssrc, and a different payload type, and
implies rewriting the seqnums of the protected stream when encoding
the protection packets. This has the unfortunate drawback of not
being able to tell whether a lost packet was a protection packet.
rtpbasedepayload relies on gaps in the seqnums to set the DISCONT
flag on buffers it outputs. Before that commit, this created two
problems:
* The protection packets don't make it as far as the depayloader,
which means it will mark buffers as DISCONT every time the previous
packets were protected
* While we could work around the previous issue by looking at
the protection packets ignored and dropped in rtpptdemux, we
would still mark buffers as DISCONT when a FEC packet was lost,
as we cannot know that it was indeed a FEC packet, even though
this should have no impact on the decoding of the stream
With this commit, we consider that when using ULPFEC, gaps in
the seqnums are not a reliable indicator of whether buffers should
be marked as DISCONT or not, and thus rewrite the seqnums on
the decoding side as well to form a perfect sequence, this
obviously doesn't prevent the jitterbuffer from doing its job
as the ulpfec decoder is downstream from it.
https://bugzilla.gnome.org/show_bug.cgi?id=794909
Sebastian Dröge [Tue, 17 Apr 2018 14:57:16 +0000 (17:57 +0300)]
Revert "rtspsrc: Fix up sendonly/recvonly attribute handling"
This reverts commit
af273b4de9eb292c0b6af63665e10ca015895902.
While RFC 3264 (SDP) says that sendonly/recvonly are from the point of view of
the requester, the actual RTSP RFCs (RFC 2326 / 7826) disagree and say
the opposite, just like the ONVIF standard.
Let's follow those RFCs as we're doing RTSP here, and add a property at
a later time if needed to switch to the SDP RFC behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=793964
Sebastian Dröge [Mon, 16 Apr 2018 18:27:47 +0000 (21:27 +0300)]
flacparse: Drain the parser when a CAPS event is received
After a CAPS event, in theory a new stream can start and it might start
with the FLAC headers again. We can't detect FLAC headers in the middle
of the stream, so we drain the parser to be able to detect either FLAC
headers after the CAPS event or the continuation of the previous stream.
This fixes for example
gst-launch-1.0 audiotestsrc num-buffers=200 ! flacenc ! c. \
audiotestsrc num-buffers=200 freq=880 ! flacenc ! c. \
concat name=c ! rtpgstpay ! udpsink host=127.0.0.1 port=5000
gst-launch-1.0 udpsrc multicast-group=127.0.0.1 port=5000 \
caps=application/x-rtp,media=application,clock-rate=90000,encoding-name=X-GST ! \
rtpgstdepay ! flacparse ! flacdec ! audioconvert ! pulsesin
Tim-Philipp Müller [Mon, 16 Apr 2018 09:52:56 +0000 (10:52 +0100)]
Automatic update of common submodule
From 3fa2c9e to ed78bee
Matthew Waters [Thu, 5 Apr 2018 06:05:12 +0000 (16:05 +1000)]
meson: add build files for the qml plugin
Tested on linux with X11/wayland and semi-tested on Windows.
Windows crashes on item destruction however this is better than nothing.
Fix up some win32 build issues on the way with mismatched {} and
G_STMT_{START,END}
Mathieu Duponchelle [Fri, 13 Apr 2018 21:02:26 +0000 (23:02 +0200)]
flvmux test: refactor looped test.
Looping the test 500 times to only execute the test once every
33 times means we inited and deinited gstreamer 467 times
for no reason at all, which was annoying when running the test
with valgrind.
Mathieu Duponchelle [Fri, 13 Apr 2018 21:01:20 +0000 (23:01 +0200)]
flvmux: unref return of aggregator_pad_peek_buffer
We ended up leaking every single buffer going through the
muxer, which is far from ideal
Mathieu Duponchelle [Fri, 13 Apr 2018 20:49:43 +0000 (22:49 +0200)]
qtmux: Fix leak
gst_qt_mux_can_renegotiate () gets called everywhere following
that pattern:
return gst_qt_mux_can_renegotiate (ref(self));
This means the reference must be released both in the success
and failure cases, it was only done in the success case.
Mathieu Duponchelle [Fri, 13 Apr 2018 20:44:14 +0000 (22:44 +0200)]
flvmux: aggregate should not push EOS itself
Instead it is expected to return GST_FLOW_EOS, and let the
base class handle that.
Mathieu Duponchelle [Fri, 13 Apr 2018 19:19:02 +0000 (21:19 +0200)]
valgrind supps: ignore gnutls leaking a certificate
After investigating, we do dispose of the TLS connections
appropriately in the souphttpsrc test, which in turn
calls gnutls_deinit, but certificates get leaked anyway.
Mathieu Duponchelle [Fri, 13 Apr 2018 18:35:24 +0000 (20:35 +0200)]
souphttpsrc test: free g_get_current_dir return
Mathieu Duponchelle [Fri, 13 Apr 2018 18:31:07 +0000 (20:31 +0200)]
valgrind supps: bring getaddrinfo suppression from -base
Mathieu Duponchelle [Fri, 13 Apr 2018 18:28:35 +0000 (20:28 +0200)]
valgrind supps: ignore more twolame conditional moves
Mathieu Duponchelle [Fri, 13 Apr 2018 15:37:47 +0000 (17:37 +0200)]
rtpulpfec tests: Fix leaks
Alicia Boya García [Fri, 16 Feb 2018 22:40:50 +0000 (23:40 +0100)]
matroskademux: Add comment about Opus clipping
https://bugzilla.gnome.org/show_bug.cgi?id=793523
Whoopie [Wed, 11 Apr 2018 20:28:00 +0000 (20:28 +0000)]
v4l2object: Disable DMABuf for emulated formats
libv4l2 does not prevent exporting DMABuf even when emulated formats are
in use. As a side effect, userspace ends up with buffers of the original
formats which will cause issues.
https://bugzilla.gnome.org/show_bug.cgi?id=795097
Nicolas Dufresne [Mon, 9 Apr 2018 00:42:16 +0000 (20:42 -0400)]
v4l2object: Only use BT2020_12 for BT2020 v4l2 colorspace
BT2020_12 is not represented in V4L2, so drivers providing full colority
for BT2020 will set V4L2_XFER_FUNC_709 transfer function. To fix the
issue, we bump this to BT2020_12 if the resoltion is 4K, but we should
only do that if the colorspace is BT2020 to start with, otherwise it's
not possible to use normal BT709 for 4K 8bit formats.
Nicolas Dufresne [Sun, 8 Apr 2018 17:43:56 +0000 (13:43 -0400)]
v4l2object: Always set the colorimetry in S_FMT
So far we were only setting colorimetry for OUTPUT devices (v4l2sink or
m2m sink pad). This prevented selecting through caps negotiation the
colorimetry for CAPTURE devices (v4l2src or m2m src pad). This is rarely
selectable, but trying is harmless.
Sebastian Dröge [Wed, 11 Apr 2018 19:41:58 +0000 (21:41 +0200)]
monoscope: Only fixate pixel-aspect-ratio if the field exists
Vivia Nikolaidou [Wed, 11 Apr 2018 14:54:38 +0000 (17:54 +0300)]
splitmuxsink: Don't send fragment-opened-closed message if the reference ctx is NULL
It can happen during teardown that the reference context becomes NULL.
In that case, trying to send the fragment-opened-closed message would
lead to a crash.
Sebastian Dröge [Wed, 11 Apr 2018 07:12:09 +0000 (09:12 +0200)]
splitmuxsink: Run gst_iterator_foreach() as long as it returns GST_ITERATOR_RESYNC
CID 1434160
Edward Hervey [Wed, 11 Apr 2018 06:51:32 +0000 (08:51 +0200)]
qtdemux: Fix comparision for extra caption atom
We want to make sure we have *enough* data for the potential 2nd
caption atom.
CID #1434161
Edward Hervey [Wed, 11 Apr 2018 06:42:54 +0000 (08:42 +0200)]
qtdemux: Handle bogus caption samples
Corrupted files could potentially have multiple cdat/cdt2 atoms in
a sample entry, which is unclear how to handle.
Ignore repeated ones.
CID #1434162
CID #1434159
Sebastian Dröge [Tue, 10 Apr 2018 19:15:48 +0000 (21:15 +0200)]
monoscope: Fixate pixel-aspect-ratio too and make sure the final caps are completely fixated
Otherwise e.g. this fails with assertions:
gst-launch-1.0 audiotestsrc ! audioconvert ! monoscope ! videoconvert ! \
videoscale ! video/x-raw,width=800,height=600 ! ximagesink
Edward Hervey [Thu, 8 Mar 2018 09:10:01 +0000 (10:10 +0100)]
qtmux: Add comments and doc about prefill mode
Edward Hervey [Tue, 6 Feb 2018 13:36:50 +0000 (14:36 +0100)]
qtmux: Refactor pad re-negotiation code
It was similar for all pads
https://bugzilla.gnome.org/show_bug.cgi?id=606643
Edward Hervey [Wed, 31 Jan 2018 14:10:03 +0000 (15:10 +0100)]
qtdemux: Detect and expose CEA 608/708 Closed Caption tracks
https://bugzilla.gnome.org/show_bug.cgi?id=606643
Mathieu Duponchelle [Tue, 3 Apr 2018 23:48:44 +0000 (01:48 +0200)]
rtxsend: fix wrong memory layout assumption
The code responsible for creating retransmitted buffers
assumed the stored buffer had been created with
rtp_buffer_new_allocate when copying the extension data,
which isn't necessarily the case, for example when
the rtp buffers come from a udpsrc.
https://bugzilla.gnome.org/show_bug.cgi?id=794958
Mathieu Duponchelle [Mon, 2 Apr 2018 21:04:06 +0000 (23:04 +0200)]
rtpbin: new signal "get-storage"
Similar to the get-session and get-internal-session signals,
we expose a get-storage signal in addition to the
get-internal-storage signal to give access to the actual
element for applications that need to set properties on the
element, in particular "size-time"
https://bugzilla.gnome.org/show_bug.cgi?id=794910
Sebastian Dröge [Thu, 29 Mar 2018 16:19:21 +0000 (19:19 +0300)]
splitmuxsink: Add new reset-muxer property
With this the muxer is not set to NULL after each segment but instead
only flush events are sent to it to reset the EOS state.
As a result, the muxer will keep stream state and e.g. mpegtsmux will
keep the packet continuity counter continuous between segments as needed
by hlssink2.
https://bugzilla.gnome.org/show_bug.cgi?id=794816
Tim-Philipp Müller [Mon, 2 Apr 2018 11:48:50 +0000 (12:48 +0100)]
tests: remove broken and now pointless v4l2src-test
This tests APIs that don't exist any longer and also doesn't
work at all, and was last touched in a meaningful way in 2006.
Seungha Yang [Tue, 20 Mar 2018 15:19:37 +0000 (00:19 +0900)]
v4l2: Fix unknown type name ‘off_t’ error
Fix following build error
gstv4l2object.h:197:17: error: unknown type name ‘off_t’
gint fd, off_t offset);
^
https://bugzilla.gnome.org/show_bug.cgi?id=794533
Mathieu Duponchelle [Thu, 25 May 2017 01:44:39 +0000 (03:44 +0200)]
rtspsrc: reject segment seeks
https://bugzilla.gnome.org/show_bug.cgi?id=784681
Edward Hervey [Tue, 13 Feb 2018 10:50:05 +0000 (11:50 +0100)]
qtdemux: Handle variant of vorbis in mp4
Comes from gpac apparently. The codec_data uses the same packing
mechanism as matroska.
https://bugzilla.gnome.org/show_bug.cgi?id=738244
Edward Hervey [Thu, 22 Mar 2018 14:20:47 +0000 (15:20 +0100)]
qtdemux: Check sample count is valid in PIFF parsing
The value stored in cenc_aux_sample_count wasn't in sync with the
parsing code that followed which checks whether all entries are
valid and present.
Only write the actual sample count when we know for sure.
CID #1427087
Carlos Rafael Giani [Sun, 4 Mar 2018 14:14:08 +0000 (15:14 +0100)]
qt: Get EGL native display from QPA if platform header is available
https://bugzilla.gnome.org/show_bug.cgi?id=792378
Petr Kulhavy [Tue, 6 Mar 2018 01:14:34 +0000 (02:14 +0100)]
udpsrc: switch to using a buffer pool
This exposes a new property, mtu, which is used to determine the
initial size of buffers from the buffer pool. If received data
exceeds this, the element gracefully handles that in a manner similar
to what we had previously: a large memory gets filled and reallocated
at the next call to "fill".
The default size is set to 1500, which should cover most use cases.
With contributions from Mathieu Duponchelle <mathieu@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=772841
Petr Kulhavy [Tue, 15 Nov 2016 08:39:31 +0000 (09:39 +0100)]
udpsrc: optimize GstUdpSrc object for cache performance
Optimize GstUdpSrc for cache performance.
Move the hot properties, which are used by the read function, to the top:
@used_socket, @addr, @cancellable, @skip_first_bytes, @timeout,
@retrieve_sender_address.
Remove the unused property @ttl.
Where needed reorder so that holes are avoided (the 64-bit @timeout)
https://bugzilla.gnome.org/show_bug.cgi?id=772841
Sebastian Dröge [Mon, 5 Mar 2018 10:48:15 +0000 (12:48 +0200)]
qtdemux: Fix seeking on streams with frame reordering
The samples table is sorted by DTS, not PTS. As such we can only get the
correct result when using a binary search on it, if we search for the
DTS.
Also if we only ever search for the frame, where the following frame is
the first one with a PTS after the search position, we will generally
stop searching too early if frames are reordered.
In forwards playback this is not really a problem (after the decoder
reordered the frames, clipping is happening), in reverse playback
it means that we can output one or more frames too few as we stop too
early and the decoder would never receive it.
https://bugzilla.gnome.org/show_bug.cgi?id=782118
Sebastian Dröge [Tue, 20 Mar 2018 09:36:32 +0000 (11:36 +0200)]
rtp: Fix compilation with non-C99 compilers
By moving variable declarations out of loop headers.
Tim-Philipp Müller [Tue, 20 Mar 2018 09:24:19 +0000 (09:24 +0000)]
Back to development
Tim-Philipp Müller [Mon, 19 Mar 2018 20:18:22 +0000 (20:18 +0000)]
Release 1.14.0
Tim-Philipp Müller [Mon, 19 Mar 2018 20:18:22 +0000 (20:18 +0000)]
Update docs
Tim-Philipp Müller [Mon, 19 Mar 2018 18:39:08 +0000 (18:39 +0000)]
rtpulpfecdec: fix build with older gcc
As on Ubuntu Trusty.
https://bugzilla.gnome.org/show_bug.cgi?id=794493
Sebastian Dröge [Mon, 19 Mar 2018 08:58:28 +0000 (10:58 +0200)]
splitmuxsink: Allow splitting at exactly the time/bytes threshold
76e458a119926424e9dd5acf3210a592a314d713 changed the conditions from
"queued > threshold" to "queued >= threshold", which broke hlssink2 and
resulting in too small fragments being created although keyframes would
be at *exactly* the configured threshold.
https://bugzilla.gnome.org/show_bug.cgi?id=794440
Tim-Philipp Müller [Sat, 17 Mar 2018 20:29:35 +0000 (20:29 +0000)]
rtpulpfec: fix unconditional use of __attribute__ ((packed))
Fix compilation with MSVC. We still assume that attribute
is supported by all other relevant compilers, which seems
to be the case since we haven't had any complaints about
similar code in rtpsbcpay.
Tim-Philipp Müller [Sat, 17 Mar 2018 13:04:47 +0000 (13:04 +0000)]
rtpulpfec: don't use non-portable notation for 64-bit int constants
Use GLib macro instead, even if it's a bit unwieldy.
Tim-Philipp Müller [Sat, 17 Mar 2018 12:55:57 +0000 (12:55 +0000)]
rtpulpfecdec: don't use __builtin_ctzll unconditionally
Fixes build with MSVC, and possibly other compilers too.
Tim-Philipp Müller [Tue, 13 Mar 2018 19:16:42 +0000 (19:16 +0000)]
Release 1.13.91
Tim-Philipp Müller [Tue, 13 Mar 2018 19:16:42 +0000 (19:16 +0000)]
Update docs
Tim-Philipp Müller [Mon, 12 Mar 2018 13:21:08 +0000 (13:21 +0000)]
docs: rtpbin: add some Since markers for new properties
Nirbheek Chauhan [Sat, 10 Mar 2018 13:27:38 +0000 (18:57 +0530)]
meson: Add deviceprovider changes to directsoundsink
These were missed when they were added to Makefile.am
Michael Tretter [Thu, 8 Mar 2018 09:12:16 +0000 (10:12 +0100)]
configure.ac: enable largefile support if possible
https://bugzilla.gnome.org/show_bug.cgi?id=793103
Nicolas Dufresne [Wed, 7 Mar 2018 19:16:02 +0000 (14:16 -0500)]
v4l2: Fix support for 32bit mmap
https://bugzilla.gnome.org/show_bug.cgi?id=793103
Tim-Philipp Müller [Sat, 3 Mar 2018 22:19:36 +0000 (22:19 +0000)]
Release 1.13.90
Tim-Philipp Müller [Sat, 3 Mar 2018 22:19:36 +0000 (22:19 +0000)]
Update docs
Olivier Crête [Thu, 1 Mar 2018 23:24:33 +0000 (18:24 -0500)]
flvmux: Duration & unit tests
The muxed buffers will not carry the duration of the
incoming buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=793457
Olivier Crête [Thu, 1 Mar 2018 22:15:02 +0000 (17:15 -0500)]
flvmux: Set PTS based on running time
https://bugzilla.gnome.org/show_bug.cgi?id=793457
Sebastian Dröge [Thu, 1 Mar 2018 16:13:20 +0000 (18:13 +0200)]
rtspsrc: Ignore sendonly/recvonly attributes unless a backchannel is configured
This works around a bug in various ONVIF cameras that implement the
attributes the wrong way around. They still won't work with a
backchannel but at least normal playback will work for the time being.
It restores pre-1.14 behaviour where we would fail to preroll on any SDP
that lists a recvonly stream. For 1.16 a better solution should be
found.
The problem here is that the ONVIF spec has the meaning of the two
attributes the wrong way around in the examples, compared to RFC4566.
https://bugzilla.gnome.org/show_bug.cgi?id=793715
Mathieu Duponchelle [Thu, 1 Mar 2018 17:16:24 +0000 (18:16 +0100)]
meson: enable more warnings
https://bugzilla.gnome.org/show_bug.cgi?id=793961
Mathieu Duponchelle [Wed, 28 Feb 2018 23:34:20 +0000 (00:34 +0100)]
Port to latest GstAggregator segment API
The aggregator segment is now exposed on the src pad
https://bugzilla.gnome.org/show_bug.cgi?id=793945
Nirbheek Chauhan [Thu, 1 Mar 2018 10:04:13 +0000 (15:34 +0530)]
directsoundsink: Downgrade rank to match directsoundsrc in -bad
As stated in commit
c2956036b8da4b8f22a63a4f5a254be03e870aa6 in -bad,
the wasapi elements are now better than directsound, and should be
preferred if they are available.
For a later release, once the elements have more testing, we can
consider moving them to -good.
Sebastian Dröge [Wed, 28 Feb 2018 17:21:53 +0000 (19:21 +0200)]
matroskamux: Only mark new clusters as keyframe if they start on a keyframe or we're muxing only audio
Based on a patch by Nicola Murino <nicola.murino@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792775
Sebastian Dröge [Wed, 28 Feb 2018 17:19:10 +0000 (19:19 +0200)]
matroskamux: Clip maximum cluster duration to the maximum possible value
Only up to timescale * G_MAXINT16 is possible as cluster duration, which
is already higher than our default value. Using higher values would
cause overflows and broken files.
Based on the investigation by Nicola Murino <nicola.murino@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792775
Sebastian Dröge [Mon, 26 Feb 2018 11:03:59 +0000 (13:03 +0200)]
matroska-mux: Refuse caps changes after starting to write headers
Matroska does not support changing the stream type and stream properties
after the headers were started to be written, and for example H264
codec_data changes can't be supported.
https://bugzilla.gnome.org/show_bug.cgi?id=782949
Mathieu Duponchelle [Tue, 27 Feb 2018 15:33:53 +0000 (16:33 +0100)]
tests: fix redenc tests
The default of the allow-no-red-blocks property was changed in a
previous commit, thus breaking the test assumptions
Tim-Philipp Müller [Tue, 27 Feb 2018 13:13:49 +0000 (13:13 +0000)]
rtp: fix another debug log printf format warning on 32-bit systems
rtpulpfeccommon.c:432:27: error: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 10 has type ‘guint64 {aka long long unsigned int}’
https://bugzilla.gnome.org/show_bug.cgi?id=793732
Mathieu Duponchelle [Mon, 26 Feb 2018 16:02:52 +0000 (17:02 +0100)]
rtpptdemux: provide example usage for ignored-payload-types
Mathieu Duponchelle [Mon, 26 Feb 2018 15:53:08 +0000 (16:53 +0100)]
rtpbin, rtpptdemux: Add missing Since markers
Mathieu Duponchelle [Mon, 26 Feb 2018 14:57:28 +0000 (15:57 +0100)]
FEC elements: document, remove irrelevant properties
The ulpfecenc "mux-seq" and "ssrc" properties were initially added
because the element did more than implement ULPFEC. As it was
decided that FLEXFEC would be implemented in a separate element,
both properties are now unneeded and confusing.
Change the default for the ulpfecenc multi-packet property,
as it is expected that most users of this element will be protecting video
streams.
Change the default property for the rtpredenc allow-no-red-blocks
property, as it should also be its default mode of operation.
https://bugzilla.gnome.org/show_bug.cgi?id=793843
Mathieu Duponchelle [Sat, 24 Feb 2018 19:05:05 +0000 (20:05 +0100)]
rtpgstdepay: do not warn when caps were not yet received
It is expected that when connecting to a stream that has
already started, the caps will only arrive at the interval
specified on rtpgstpay, we shouldn't be warning as this is
a normal mode of operation.
https://bugzilla.gnome.org/show_bug.cgi?id=793798
Arnaud Bonatti [Thu, 22 Feb 2018 20:53:40 +0000 (21:53 +0100)]
rtpulpfec: fix debug log printf format warning on 32-bit platforms
https://bugzilla.gnome.org/show_bug.cgi?id=793732
Tim-Philipp Müller [Thu, 22 Feb 2018 14:58:12 +0000 (14:58 +0000)]
docs: hook up new RTP FEC elements
https://bugzilla.gnome.org/show_bug.cgi?id=792696
Tim-Philipp Müller [Thu, 22 Feb 2018 14:57:58 +0000 (14:57 +0000)]
docs: update for git master
Tim-Philipp Müller [Thu, 22 Feb 2018 10:54:02 +0000 (10:54 +0000)]
.gitignore more test binaries
Tim-Philipp Müller [Wed, 21 Feb 2018 20:46:10 +0000 (20:46 +0000)]
tests: also dist new fec test header file
Tim-Philipp Müller [Wed, 21 Feb 2018 20:44:26 +0000 (20:44 +0000)]
rtp: dist new header files
Fixes make distcheck
Tim-Philipp Müller [Wed, 21 Feb 2018 18:52:44 +0000 (18:52 +0000)]
rtp: fec: fix build with gstreamer debug log system disabled
Mathieu Duponchelle [Wed, 21 Feb 2018 18:59:04 +0000 (19:59 +0100)]
rtpptdemux: do no assume sink caps are non NULL
Mathieu Duponchelle [Wed, 21 Feb 2018 17:51:17 +0000 (18:51 +0100)]
check: Fix ulpfec test build
The test name was updated but not the build definition
Mathieu Duponchelle [Tue, 28 Nov 2017 05:02:05 +0000 (06:02 +0100)]
rtpbin: Expose FEC support signals
Also slightly refactor complete_session_src
https://bugzilla.gnome.org/show_bug.cgi?id=792696
Mikhail Fludkov [Fri, 17 Nov 2017 02:52:03 +0000 (03:52 +0100)]
rtp: Implement ULPFEC (RFC 5109)
We expose a set of new elements:
* ULPFEC encoder / decoder
* A storage element, which should be placed before jitterbuffers,
and is used to store packets in order to attempt reconstruction
after the jitterbuffer has sent PacketLost events
* RED encoder / decoder (RFC 2198), these are necessary to
use FEC in webrtc, as browsers will propose and expect ulpfec
packets to be wrapped in red packets
With contributions from:
Mathieu Duponchelle <mathieu@centricular.com>
Sebastian Dröge <sebastian@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792696
Mathieu Duponchelle [Tue, 28 Nov 2017 00:11:54 +0000 (01:11 +0100)]
rtpptdemux: Add ignored-payload-types property
Packets with these payload types will be dropped. A use case
for this is FEC, where we want FEC packets to go through the
jitterbuffer, but not be output by rtpbin.
https://bugzilla.gnome.org/show_bug.cgi?id=792696
Mathieu Duponchelle [Mon, 20 Nov 2017 17:08:38 +0000 (18:08 +0100)]
rtpptdemux: Add ssrc to output caps
It may be useful downstream
https://bugzilla.gnome.org/show_bug.cgi?id=792696
Arnaud Bonatti [Wed, 21 Feb 2018 10:12:10 +0000 (11:12 +0100)]
gtk: fix compiler warning with recent glib
https://bugzilla.gnome.org/show_bug.cgi?id=793688
Matthew Waters [Wed, 21 Feb 2018 00:35:33 +0000 (11:35 +1100)]
qt: don't use libEGL functions when we don't link to libEGL
Use the provided wrapper available from libgstgl.
https://bugzilla.gnome.org/show_bug.cgi?id=793547
Sebastian Dröge [Sun, 18 Feb 2018 20:38:13 +0000 (21:38 +0100)]
monoscope: Forward the SEGMENT event from the chain function
Otherwise we'll break the event order and forward the SEGMENT event
before sending a CAPS event.
James Stevenson [Fri, 16 Feb 2018 12:25:29 +0000 (12:25 +0000)]
rtspsrc: Fix missing read property of backchannel
Add missing read property code for backchannel
https://bugzilla.gnome.org/show_bug.cgi?id=793507
Tim-Philipp Müller [Fri, 16 Feb 2018 09:42:59 +0000 (09:42 +0000)]
examples: rtsp: fix meson build take 2
Sebastian Dröge [Fri, 16 Feb 2018 09:30:01 +0000 (11:30 +0200)]
rtsp: Fix meson.build of the example
Sebastian Dröge [Fri, 26 Jan 2018 14:33:21 +0000 (16:33 +0200)]
rtspsrc: Implement ONVIF backchannel support via TCP
Nirbheek Chauhan [Fri, 13 Oct 2017 15:05:54 +0000 (18:05 +0300)]
rtspsrc: Implement ONVIF backchannel support
Set backchannel=onvif to enable, and use the 'push-backchannel-sample'
action signal with the correct stream id.
Jan Schmidt [Thu, 15 Feb 2018 14:49:57 +0000 (01:49 +1100)]
splitmuxsrc: Improve not-linked handling.
Don't report not-linked unless all pads have
returned not-linked.
Tim-Philipp Müller [Thu, 15 Feb 2018 19:44:19 +0000 (19:44 +0000)]
Back to development
Tim-Philipp Müller [Thu, 15 Feb 2018 17:06:10 +0000 (17:06 +0000)]
Release 1.13.1
Tim-Philipp Müller [Thu, 15 Feb 2018 17:05:23 +0000 (17:05 +0000)]
docs: update plugin docs
Tim-Philipp Müller [Thu, 15 Feb 2018 13:32:20 +0000 (13:32 +0000)]
po: update translations
Patrick Radizi [Wed, 14 Feb 2018 15:38:07 +0000 (16:38 +0100)]
rtpjitterbuffer: allow timestamps to move backwards
The original solution for #784002 incorrectly assumed that timestamps
may not move backwards and changed timestamps that did so.
https://bugzilla.gnome.org/show_bug.cgi?id=784002
Tim-Philipp Müller [Thu, 15 Feb 2018 00:58:38 +0000 (00:58 +0000)]
docs: remove pointless Since: 0.10.x markers