Venkata Prasad Potturu [Wed, 21 Sep 2022 09:07:44 +0000 (14:37 +0530)]
ASoC: amd: acp: Add setbias level for rt5682s codec in machine driver
Add set_bais_level function for rt5682s codec to enable bclk and lrclk
before codec widgets power on and disable bclk and lrclk after widgets
power down, to avoid pop noise
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20220921090750.3833256-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Wed, 19 Oct 2022 14:13:17 +0000 (15:13 +0100)]
ASoC: SOF: Intel: Harden the IPC4 low level sequencing
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
The IPC4 use of doorbell registers leaves some corner cases not well defined
and the 'correct sequences' are subjective in a sense.
The DSP doorbell registers are used as separate and independent channels and
the sequences for host -> DSP -> host (reply) can be racy.
For example:
The ACKing of a received message can happen before the firmware sends the reply
or it can as well happen after the reply has been sent and received by the host.
Both can be considered 'correct sequences' but they need different handling.
This series will allow the kernel to service any interpretation of the
sequencing on the firmware side.
Shaomin Deng [Mon, 17 Oct 2022 14:18:12 +0000 (10:18 -0400)]
ASoC: meson: axg-pdm: Fix double word in comments
Delete the doubled word "for" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221017141812.6867-1-dengshaomin@cdjrlc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Wed, 19 Oct 2022 11:03:40 +0000 (12:03 +0100)]
ASoC: soc-dapm.c random cleanups
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
These are random cleanup for soc-dpam.c/h.
Basically, these are just cleanup, nothing changed.
Mark Brown [Wed, 19 Oct 2022 11:03:33 +0000 (12:03 +0100)]
ASoC: Intel/SOF: simplify S3 resume flows
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
All Intel drivers for cAVS platforms contain a sequence for S3 resume
which doesn't seem justified nor necessary. Forensic Git investigation
in internal repositories did not provide any rationale for the
implementation, and tests show no impact when those sequences are
removed.
This sequence was identified as problematic during a large HDaudio
cleanup where all programming sequences were revisited before
extensions are added.
Colin Ian King [Tue, 18 Oct 2022 15:29:28 +0000 (16:29 +0100)]
ASoC: twl4030: make read-only array ramp_base static const
Don't populate the read-only array ramp_base on the stack but
instead make it static const. Also makes the object code a
little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221018152928.942186-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Venkata Prasad Potturu [Tue, 18 Oct 2022 12:27:06 +0000 (17:57 +0530)]
ASoC: amd: acp: Add TDM slots setting support for ACP I2S controller
Modify set tdm slot function to set ACP I2S controller slots
in tdm mode based on number of slots.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20221018122711.2559452-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 18 Oct 2022 13:38:43 +0000 (16:38 +0300)]
ASoC: SOF: ipc3: Log the tx message before sending it
It makes more sense to log the message before it is sent to the DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221018133843.16958-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 18 Oct 2022 12:40:08 +0000 (15:40 +0300)]
ASoC: SOF: Intel: ipc4: Ack a received reply or notification separately
By acking a received message we tell the DSP that we have processed the
message (reply or notification) and we are open to receive a new one.
The original implementation did this in a common code after the received
message got handled as reply or notification.
With right timing this opens up a small window when we have processed the
reply and let the other thread proceed to send a new message to the DSP,
which is allowed as the DSP is free to receive message.
But when the message is received and processed by the DSP and it wants to
send a reply it will still see that the previous message has not been
acked, so it fails to send a reply. Later the first reply got acked by the
kernel, but it is too late and the in-flight message got a timeout due to
firmware not responding (which it tried, but could not).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 18 Oct 2022 12:40:07 +0000 (15:40 +0300)]
ASoC: SOF: Intel: ipc4: Wait for channel to be free before sending a message
Before attempting to send a message to the DSP we need to check if the
downstream BUSY flag has been cleared by the firmware to avoid lost IPC
messages by the firmware.
This is required by a firmware which only acks the received message after
it has sent a reply to the host.
With a bad luck, the host would send a message before the firmware gets to
the clearing the flag and thus losing a message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 18 Oct 2022 12:40:06 +0000 (15:40 +0300)]
ASoC: SOF: Intel: ipc4: Read the interrupt reason registers at the same time
Read both registers as the first step in the interrupt handler to make
sure that we are handling the event which triggered the interrupt.
The delayed reading of the target request register might reflect incorrect
information about the reason why the interrupt was risen.
Note also that the IPC3 interrupt handler is implemented in this way also.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 18 Oct 2022 12:40:05 +0000 (15:40 +0300)]
ASoC: SOF: ipc4: Log the tx message before sending it
It makes more sense to log the message before it is sent to the DSP.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221018124008.6846-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 17 Oct 2022 23:36:56 +0000 (23:36 +0000)]
ASoC: soc-dapm.c: cleanup dapm_widget_set_power()
This patch cleanup dapm_widget_set_power() comment, parenthesis,
and 100 chars. It has no meaning, nothing will be changed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8oiowdk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 17 Oct 2022 23:36:49 +0000 (23:36 +0000)]
ASoC: soc-dapm.c: ignore parameter NULL at snd_soc_dapm_free_widget()
Currently snd_soc_dapm_free_widget() is assuming input parameter is
non NULL. Thus, caller need to care about it.
This patch care it at snd_soc_dapm_free_widget().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn8yowdr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 17 Oct 2022 23:36:42 +0000 (23:36 +0000)]
ASoC: soc-dapm.c: remove no meaning variable from snd_soc_dapm_add_path()
snd_soc_dapm_add_path() is using local variable "widgets[]", but it is
same as path->node[].
This is no meaning and duplicate operation. This patch removes "widgets[]".
path->node[SND_SOC_DAPM_DIR_IN] = wsource;
path->node[SND_SOC_DAPM_DIR_OUT] = wsink;
widgets[SND_SOC_DAPM_DIR_IN] = wsource;
widgets[SND_SOC_DAPM_DIR_OUT] = wsink;
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1teowdx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 17 Oct 2022 23:36:35 +0000 (23:36 +0000)]
ASoC: soc-dapm.c: tidyup error handling on snd_soc_dapm_add_route()
Current error handling on snd_soc_dapm_add_route() has some wastes.
It indicates *own* error message *only* for sink or source,
and return error directly at (A). OTOH, it has similar error message at
(B) which indicates *both* sink/source.
And more, (A) is using dev_err(), (B) is using dev_warn().
(B) is caring prefix, but (A) is not.
(X) int snd_soc_dapm_add_route(...)
{
...
if (wsource == NULL) {
(A) dev_err(...);
return -ENODEV;
}
if (wsink == NULL) {
(A) dev_err(...);
return -ENODEV;
}
...
ret = snd_soc_dapm_add_path(...);
if (ret)
(B) goto err;
return 0;
err:
(B) dev_warn(...);
return ret;
}
Above snd_soc_dapm_add_route() (= X) is called from
snd_soc_dapm_add_routes() (= Y).
(X) will indicate error message by itself, but (Y) will indicate
own error message at (C). (C) is duplicated.
(Y) int snd_soc_dapm_add_routes(...)
{
...
for (...) {
(X) int r = snd_soc_dapm_add_route(...);
if (r < 0) {
(C) dev_err(...);
ret = r;
}
...
}
...
}
This patch (1) merges these error message (= A,B) into one,
(2) use dev_err(), (3) remove duplicate error message (= C) from
snd_soc_dapm_add_routes().
By this patch, it will indicate error message like this.
- error message with prefix
- not found widget will have "(*)" mark
- it indicates [control] if exists.
ex)
[if no sink with control]
ASoC: Failed to add route SOURCE -> [CTRL] -> SINK(*)
[if no source without control]
ASoC: Failed to add route SOURCE(*) -> SINK
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgduowe5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto [Mon, 17 Oct 2022 23:36:27 +0000 (23:36 +0000)]
ASoC: soc-dapm.c: replace snd_soc_dapm_wcache to snd_soc_dapm_widget
Current ASoC has snd_soc_dapm_wcache, but its member is only
snd_soc_dapm_widget.
struct snd_soc_dapm_wcache {
struct snd_soc_dapm_widget *widget;
};
It is no meaning for now, and makes code unreadable.
This patch replace snd_soc_dapm_wcache to snd_soc_dapm_widget directly.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qr6qayt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 17 Oct 2022 20:49:46 +0000 (15:49 -0500)]
ASoC: SOF: Intel: hda-dsp: simplify S3 resume flows
The flow contains surprising parts that seem to have been inspired by
the Skylake driver.
During a resume from S3, the state of the links prior to suspend
should not matter. One would have to assume that the links are powered
down anyways prior to suspend, and there is also no specific code that
turns links on unconditionally on resume.
Likewise, the snd_hdac_init_chip() routine will start the cmd_io
handling, and it's not clear why we should care about the state of the
DMA prior to suspend.
This patch removes these two sequences to simplify the flow.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 17 Oct 2022 20:49:45 +0000 (15:49 -0500)]
ASoC: Intel: avs: simplify S3 resume flows
The same code was directly copied from the skylake driver where it was
already questionable. Remove and simplify the flow.
Tested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pierre-Louis Bossart [Mon, 17 Oct 2022 20:49:44 +0000 (15:49 -0500)]
ASoC: Intel: Skylake: simplify S3 resume flows
Commit
cce6c149eba3a ("ASoC: Intel: Skylake: add link management")
added a perfectly logical/symmetrical link handling for
'suspend_active' aka S0ix
However that commit also added a less obvious part, where during S3
resume the code will "turn off the links which are off before suspend"
as well as stop the cmd_io which is not started.
This sequence looks completely unnecessary and possibly wrong, remove it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221017204946.207986-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Tue, 18 Oct 2022 12:01:34 +0000 (13:01 +0100)]
ASoC: add devicetree support for WM8961 codec
Merge series from Doug Brown <doug@schmorgal.com>:
This series adds devicetree support for the Wolfson WM8961 codec. The
first patch adds a schema, the second patch hooks it up in the code, and
the third patch allows it to be selected in Kconfig.
Mark Brown [Tue, 18 Oct 2022 12:01:27 +0000 (13:01 +0100)]
ASoC: Intel: avs: Fixes and new boards support
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Two fixes are leading the way - one addresses the incorrect DMA mask
assignment (typo) at driver probe. The other, fixes a potential buffer
overflow when copying data received from firmware to kernel buffer.
However unlikely, the fix should still be there.
Then a range of patches providing the support for:
- AML with rt286 (machine board)
- KBL-R for rt298 (codec)
- KBL-R with rt298 (machine board)
- APL/KBL with da7219 (machine board)
- Addition of all the missing SKL-based PCI ids to core.c
Of the remaining changes, only one stands out - special case is provided
for "unsupported" IPCs. The driver supports a range of platforms,
however, on some generations given IPC may not be supported. Such call
shall not be treated as "invalid" - those are two different scenarios.
Everything else in the patchset is mostly a readability improvement:
spelling fixes and log messages issues, code simplification.
Mark Brown [Tue, 18 Oct 2022 11:14:52 +0000 (12:14 +0100)]
Create a new sound card to access MICFIL based on rpmsg channel
Merge series from Chancel Liu <chancel.liu@nxp.com>:
At a previous time, we have successfully created a virtual sound card
based on rpmsg. The sound card works under this mechanism Cortex-A core
tells the Cortex-M core the format, rate, channel, .etc configuration
of the PCM parameters and Cortex-M controls real hardware devices such
as SAI and DMA. From the view of Linux side, the sound card is bound to
a rpmsg channel through which it can access SAI.
Here these patches are introduced to create a new virtual sound card to
access MICFIL based on a new created rpmsg channel. It's easy to create
a new rpmsg channel for MICFIL through rpmsg name service announcment.
Also the other ASoC components bound to this rpmsg MICFIL sound card
will be registered with these patches.
If other sound cards using different hardware devices needs to be
created over rpmsg in the future, these patches can be referred.
Mark Brown [Tue, 18 Oct 2022 11:14:45 +0000 (12:14 +0100)]
ASoC: codecs: jz4725b: Various improvements and fixes
Merge series from Siarhei Volkau <lis8215@gmail.com>:
The patchset fixes:
- Line In path stays powered off during capturing or
bypass to mixer.
- incorrectly represented dB values in alsamixer, et al.
- incorrect represented Capture input selector in alsamixer
in Playback tab.
- wrong control selected as Capture Master
The patchset improves:
- Exposes output stage (post mixer) gain control and makes it new
Master playback gain, DAC gain was the previous master.
However, no Master mute now.
- Exposes all mixer inputs (both Mics, LineIn and DAC) with their
gain controls.
- Exposes microphones widgets: single/differential input, boost.
Known issues:
- Bypass path enablement isn't applied immediately, for make
things going bit clock needs to be triggered for a bit,
e.g. by aplay dummy.wav
It might be a hardware bug, since the bit clock isn't
declared as required for codec operation.
Tested on:
- Ritmix RZX-27 (jz4725b).
- Ritmix RZX-50 (jz4755).
Mark Brown [Tue, 18 Oct 2022 11:14:39 +0000 (12:14 +0100)]
ASoC: Use DIV_ROUND_UP() instead of open-coding it
Merge series from Shang XiaoJing <shangxiaojing@huawei.com>:
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes
it more clear what is going on for the casual reviewer.
Mark Brown [Tue, 18 Oct 2022 11:14:33 +0000 (12:14 +0100)]
ASoC: Intel: avs: Add support for max98927 codec
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
This series adds machine board for max98927 codec present on some
Chromebook devices.
Siarhei Volkau [Sun, 16 Oct 2022 13:26:48 +0000 (16:26 +0300)]
ASoC: codecs: jz4725b: add missed microphone widgets
Microphone input can be single ended or differential, although
known SoCs with that codec expose MIC1P only.
Also there is 20dB mic boost in the Mic1 path.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-8-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Siarhei Volkau [Sun, 16 Oct 2022 13:26:47 +0000 (16:26 +0300)]
ASoC: codecs: jz4725b: add missed Mixer inputs
The Mixer couples analog input from 4 sources (DAC, Line In, Mic 1,
Mic 2) each input has its own gain & mute controls.
At the moment only DAC is implemented fully and Line In path can be
switched on/off. The patch implements Mic 1 and Mic 2 paths and fully
implements Line In path.
Manual states that these controls (16.6.3.3 Programmable attenuation:
GOi) gain varies from -22.5dB to +6.0dB with 1.5dB step. Also there's
extra values below the minimum, but they behave the same as the minimum
value.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-7-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Siarhei Volkau [Sun, 16 Oct 2022 13:26:46 +0000 (16:26 +0300)]
ASoC: codecs: jz4725b: use right control for Master Playback
At the moment DAC control is used as Master Playback control, this is
incorrect as DAC's output goes to a Mixer.
The Mixer couples analog input from 4 sources (DAC, Line In, Mic 1,
Mic 2) each input has its own gain & mute controls.
Output of the Mixer goes to Output Stage control which is the best suite
for the new Playback Master. However, it doesn't have mute capability.
The patch implements Output Stage control as a new master and renames
old Master to DAC. Rest of mixer inputs will be implemented in the next
patch in the series.
Manual states that Output stage control (16.6.3.5 Programmable output
amplifier: PGAT) gain varies from -33.5dB to +4.5dB, gain step isn't
fixed and has 3 opts.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-6-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Siarhei Volkau [Sun, 16 Oct 2022 13:26:45 +0000 (16:26 +0300)]
ASoC: codecs: jz4725b: fix capture selector naming
At the moment Capture source selector appears on Playback
tab in the alsamixer and has a senseless name.
Let's fix that.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-5-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Siarhei Volkau [Sun, 16 Oct 2022 13:26:44 +0000 (16:26 +0300)]
ASoC: codecs: jz4725b: use right control for Capture Volume
Line In Bypass control is used as Master Capture at the moment
this is completely incorrect.
Current control routed to Mixer instead of ADC, thus can't affect
Capture path. ADC control shall be used instead.
ADC volume control parameters are different, so the patch fixes that
as well. Manual says (16.6.3.2 Programmable input attenuation amplifier:
PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-4-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Siarhei Volkau [Sun, 16 Oct 2022 13:26:43 +0000 (16:26 +0300)]
ASoC: codecs: jz4725b: fix reported volume for Master ctl
DAC volume control is the Master Playback Volume at the moment
and it reports wrong levels in alsamixer and other alsa apps.
The patch fixes that, as stated in manual on the jz4725b SoC
(16.6.3.4 Programmable attenuation: GOD) the ctl range varies
from -22.5dB to 0dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-3-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Siarhei Volkau [Sun, 16 Oct 2022 13:26:42 +0000 (16:26 +0300)]
ASoC: codecs: jz4725b: add missed Line In power control bit
Line In path stayed powered off during capturing or
bypass to mixer.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-2-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:55 +0000 (14:19 +0200)]
ASoC: codecs: hda: Fix spelling error in log message
To improve readability.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:54 +0000 (14:19 +0200)]
ASoC: Intel: avs: Simplify log control for SKL
Loop only till the actual number of AudioDSP cores, not the value of
mask made from said number.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:53 +0000 (14:19 +0200)]
ASoC: Intel: avs: Simplify ignore_fw_version description
Reword the parameter description to drop any confusion regarding its
purpose.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:52 +0000 (14:19 +0200)]
ASoC: Intel: avs: Do not print IPC error message twice
ENABLE_LOGS and SYSTEM_TIME IPCs call LARGE_CONFIG_SET internally which
dumps an error message in case of an error. There is no need to repeat
the process in the top level handler.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:51 +0000 (14:19 +0200)]
ASoC: Intel: avs: Do not treat unsupported IPCs as invalid
Utilize NOT_SUPPORTED status code to differentiate between unsupported
and invalid requests. Skip over error paths if it is the former that is
communicated by the base firmware.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:50 +0000 (14:19 +0200)]
ASoC: Intel: avs: Do not reuse msg between different IPC handlers
While LOG_BUFFER_STATUS is a simple notification with only one
meaningful field, same message ptr shall not be reused for two different
handlers.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński [Mon, 10 Oct 2022 12:19:49 +0000 (14:19 +0200)]
ASoC: Intel: avs: Add missing include to HDA board
In some configurations board fails to compile due to missing header. Add
it to fix build.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:48 +0000 (14:19 +0200)]
ASoC: Intel: avs: Simplify d0ix disabling routine
No need to atomic_add_return(1) when there is atomic_inc_return()
available.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:47 +0000 (14:19 +0200)]
ASoC: Intel: avs: Add missing SKL-based device IDs
Enable additional SKL-based configurations by filling device ID table
with new entries.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński [Mon, 10 Oct 2022 12:19:46 +0000 (14:19 +0200)]
ASoC: Intel: avs: Support da7219 on both KBL and APL
KBL and APL devices use same codec but have different clock, so it must
be set appropriately depending on device.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:45 +0000 (14:19 +0200)]
ASoC: Intel: avs: Support AML with rt286 configuration
ACPI ID of INT343A signals rt286 device for SKL, KBL and AML platforms.
Add the missing AML entry.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński [Mon, 10 Oct 2022 12:19:44 +0000 (14:19 +0200)]
ASoC: Intel: avs: Add quirk for KBL-R RVP platform
KBL-R RVPs contain built-in rt298 codec which requires different PLL
clock and .dai_fmt configuration than seen on other boards.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński [Mon, 10 Oct 2022 12:19:43 +0000 (14:19 +0200)]
ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
KBL-R RVP platforms also use combojack, so we need to enable that
configuration for them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:42 +0000 (14:19 +0200)]
ASoC: Intel: avs: Fix potential RX buffer overflow
If an event caused firmware to return invalid RX size for
LARGE_CONFIG_GET, memcpy_fromio() could end up copying too many bytes.
Fix by utilizing min_t().
Reported-by: CoolStar <coolstarorganization@gmail.com>
Fixes:
f14a1c5a9f83 ("ASoC: Intel: avs: Add module management requests")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cezary Rojewski [Mon, 10 Oct 2022 12:19:41 +0000 (14:19 +0200)]
ASoC: Intel: avs: Fix DMA mask assignment
Spelling error leads to incorrect behavior when setting up DMA mask.
Fixes:
a5bbbde2b81e ("ASoC: Intel: avs: Use helper function to set up DMA")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Vijendar Mukunda [Mon, 10 Oct 2022 09:39:40 +0000 (15:09 +0530)]
ASoC: amd: Update Pink Sardine platform ACP register header
Update Pink Sardine platform ACP register header with Soundwire
Controller specific registers and other ACP registers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20221010093941.2354783-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marcin Wojtas [Mon, 26 Sep 2022 11:05:33 +0000 (13:05 +0200)]
ASoC: kirkwood: enable Kirkwood driver for Armada 38x platforms
The audio unit of Marvell Armada38x SoC is similar to the ones comprised by
other Marvell SoCs (Kirkwood, Dove and Armada 370). Therefore KW audio
driver can be used to support it and this commit adds new compatible string
to identify Armada 38x variant.
Two new memory regions are added: first one for PLL configuration and
the second one for choosing one of audio I/O modes (I2S or S/PDIF).
For the latter purpose a new optional DT property is added ('spdif-mode').
kirkwood-i2s driver is extended by adding a new init function for Armada
38x flavor and also a routine that enables PLL output (i.e. MCLK)
configuration.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Tested-by: Star_Automation <star@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Lior Amsalem <alior@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Hezi Shahmoon <hezi@marvell.com>
Reviewed-by: Neta Zur Hershkovits <neta@marvell.com>
[pali: Fix support for pre-38x SoCs]
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220926110533.13475-1-pali@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Yang Yingliang [Wed, 21 Sep 2022 15:31:23 +0000 (23:31 +0800)]
ASoC: cs42l83: change cs42l83_regmap to static
cs42l83_regmap is only used in cs42l83-i2c.c now, change it to static.
Fixes:
94d5f62a91aa ("ASoC: cs42l83: Extend CS42L42 support to new part")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220921153123.1508144-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Viorel Suman [Thu, 13 Oct 2022 12:36:51 +0000 (20:36 +0800)]
ASoC: ak4458: add optional reset control to instead of gpio
Add optional reset control instead of GPIO to manage codec
PDN pin.
As there is reference counter for reset control, so need
to remove one ak4458_reset in runtime resume to make the
reference counter balance.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1665664611-21350-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shengjiu Wang [Fri, 23 Sep 2022 09:31:34 +0000 (17:31 +0800)]
ASoC: fsl_micfil: Add Hardware Voice Activity Detector support
The Hardware Voice Activity Detector (HWVAD) is a block
responsible for detect voice activity in a channel selected
by the user. It can be configured in Envelope-based or
Energy-based mode.
There are additional two interrupts for HWVAD, one is event
interrupt, another is error interrupt.
Enable hwvad in parallel with recording.
when voice activity detected, HWVAD will be disabled and
alsa control notification is triggerred.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1663925494-9941-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shang XiaoJing [Tue, 27 Sep 2022 14:09:48 +0000 (22:09 +0800)]
ASoC: ti: davinci-mcasp: Use DIV_ROUND_UP() instead of open-coding it
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it
more clear what is going on for the casual reviewer.
The Coccinelle references Commit
e4d8aef21403 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927140948.17696-5-shangxiaojing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shang XiaoJing [Tue, 27 Sep 2022 14:09:47 +0000 (22:09 +0800)]
ASoC: rsnd: Use DIV_ROUND_UP() instead of open-coding it
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it
more clear what is going on for the casual reviewer.
The Coccinelle references Commit
e4d8aef21403 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927140948.17696-4-shangxiaojing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shang XiaoJing [Tue, 27 Sep 2022 14:09:46 +0000 (22:09 +0800)]
ASoC: wm8978: Use DIV_ROUND_UP() instead of open-coding it
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it
more clear what is going on for the casual reviewer.
The Coccinelle references Commit
e4d8aef21403 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220927140948.17696-3-shangxiaojing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shang XiaoJing [Tue, 27 Sep 2022 14:09:45 +0000 (22:09 +0800)]
ASoC: cs35l36: Use DIV_ROUND_UP() instead of open-coding it
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it
more clear what is going on for the casual reviewer.
The Coccinelle references Commit
e4d8aef21403 ("ALSA: usb: Use
DIV_ROUND_UP() instead of open-coding it").
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220927140948.17696-2-shangxiaojing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chancel Liu [Fri, 30 Sep 2022 06:44:41 +0000 (14:44 +0800)]
ASoC: imx-rpmsg: Assign platform driver used by machine driver to link with
Each ASoC platform driver is named by rpmsg channel. ASoC machine
driver can parse "fsl,rpmsg-channel-name" property to figure out which
ASoC platform driver it should link with.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220930064441.2548505-8-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chancel Liu [Fri, 30 Sep 2022 06:44:40 +0000 (14:44 +0800)]
ASoC: fsl_rpmsg: Multi-channel support in CPU DAI driver
Some sound card based on rpmsg may support multi-channel. This patch
expands the maximum channels to 32.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220930064441.2548505-7-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chancel Liu [Fri, 30 Sep 2022 06:44:39 +0000 (14:44 +0800)]
ASoC: fsl_rpmsg: Register different ASoC machine devices
This driver helps register ASoC machine device thus use of
PLATFORM_DEVID_AUTO macro in API can automatically create device for
each sound card based on rpmsg.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220930064441.2548505-6-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chancel Liu [Fri, 30 Sep 2022 06:44:38 +0000 (14:44 +0800)]
ASoC: imx-pcm-rpmsg: Multi-channel support for sound card based on rpmsg
Some sound card based on rpmsg may support multi-channel. The number of
channels can be sent to Cortex-M in rpmsg for process.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220930064441.2548505-5-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chancel Liu [Fri, 30 Sep 2022 06:44:37 +0000 (14:44 +0800)]
ASoC: imx-pcm-rpmsg: Register different platform drivers
This patch can register different ASoC platform drivers if there are
several rpmsg channels. Thus sound cards based on different rpmsg
channels can link to their respective platform drivers. Besides, the
name of driver is equal to the name of rpmsg channel.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220930064441.2548505-4-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chancel Liu [Fri, 30 Sep 2022 06:44:36 +0000 (14:44 +0800)]
ASoC: imx-audio-rpmsg: Create rpmsg channel for MICFIL
Rpmsg channel for MICFIL can also be created through rpmsg name service
announcement. If this driver is probed, Cortex-A can access MICFIL
which is actually controlled by Cortex-M through rpmsg channel for
MICFIL. This driver also helps register ASoC platform device thus use
of PLATFORM_DEVID_AUTO macro in API can automatically create device for
each rpmsg channel.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220930064441.2548505-3-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Chancel Liu [Fri, 30 Sep 2022 06:44:35 +0000 (14:44 +0800)]
ASoC: dt-bindings: fsl_rpmsg: Add a property to assign the rpmsg channel
Add a string property to assign the rpmsg channel this sound card sits
on. This property can be omitted if there is only one sound card and it
sits on "rpmsg-audio-channel".
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220930064441.2548505-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński [Fri, 30 Sep 2022 12:45:38 +0000 (14:45 +0200)]
ASoC: Intel: avs: Load max98927 on target platform
In order to load proper board configuration it needs to be looked up in
ACPI. Add board configuration for MAXIM 98927 codec present on
Chromebooks.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220930124538.354992-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amadeusz Sławiński [Fri, 30 Sep 2022 12:45:37 +0000 (14:45 +0200)]
ASoC: Intel: avs: Add max98927 machine board
To support AVS-max98927 configuration add machine board connecting AVS
platform component driver with max98927 codec one.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220930124538.354992-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Doug Brown [Mon, 3 Oct 2022 03:24:14 +0000 (20:24 -0700)]
ASoC: codecs: allow WM8961 to be selected by the user
Allow the WM8961 driver to be enabled independently now that it is
usable with devicetree.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221003032414.248326-4-doug@schmorgal.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Doug Brown [Mon, 3 Oct 2022 03:24:13 +0000 (20:24 -0700)]
ASoC: wm8961: add support for devicetree
Add support for devicetree to the WM8961 driver so it can be used with
modern DT-based kernels.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221003032414.248326-3-doug@schmorgal.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Doug Brown [Mon, 3 Oct 2022 03:24:12 +0000 (20:24 -0700)]
ASoC: dt-bindings: add schema for WM8961
Create a simple DT schema for the existing Wolfson WM8961 driver so that
DT support can be added to the driver.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221003032414.248326-2-doug@schmorgal.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Mon, 17 Oct 2022 11:47:15 +0000 (12:47 +0100)]
Merge existing fixes from asoc/for-6.1 into new branch
Linus Torvalds [Sun, 16 Oct 2022 22:36:24 +0000 (15:36 -0700)]
Linux 6.1-rc1
Linus Torvalds [Sun, 16 Oct 2022 22:27:07 +0000 (15:27 -0700)]
Merge tag 'random-6.1-rc1-for-linus' of git://git./linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
Linus Torvalds [Sun, 16 Oct 2022 22:14:29 +0000 (15:14 -0700)]
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
Linus Torvalds [Sun, 16 Oct 2022 18:12:22 +0000 (11:12 -0700)]
Merge tag 'kbuild-fixes-v6.1' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
Linus Torvalds [Sun, 16 Oct 2022 18:08:19 +0000 (11:08 -0700)]
Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
Linus Torvalds [Sun, 16 Oct 2022 18:01:40 +0000 (11:01 -0700)]
Merge tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- fix a regression in guest mounts to old servers
- improvements to directory leasing (caching directory entries safely
beyond the root directory)
- symlink improvement (reducing roundtrips needed to process symlinks)
- an lseek fix (to problem where some dir entries could be skipped)
- improved ioctl for returning more detailed information on directory
change notifications
- clarify multichannel interface query warning
- cleanup fix (for better aligning buffers using ALIGN and round_up)
- a compounding fix
- fix some uninitialized variable bugs found by Coverity and the kernel
test robot
* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve SMB3 change notification support
cifs: lease key is uninitialized in two additional functions when smb1
cifs: lease key is uninitialized in smb1 paths
smb3: must initialize two ACL struct fields to zero
cifs: fix double-fault crash during ntlmssp
cifs: fix static checker warning
cifs: use ALIGN() and round_up() macros
cifs: find and use the dentry for cached non-root directories also
cifs: enable caching of directories for which a lease is held
cifs: prevent copying past input buffer boundaries
cifs: fix uninitialised var in smb2_compound_op()
cifs: improve symlink handling for smb2+
smb3: clarify multichannel warning
cifs: fix regression in very old smb1 mounts
cifs: fix skipping to incorrect offset in emit_cached_dirents
Tetsuo Handa [Sat, 15 Oct 2022 15:53:51 +0000 (00:53 +0900)]
Revert "cpumask: fix checking valid cpu range".
This reverts commit
78e5a3399421 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit
78e5a3399421 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734
Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nathan Chancellor [Fri, 14 Oct 2022 20:42:11 +0000 (13:42 -0700)]
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Fri, 14 Oct 2022 20:18:11 +0000 (05:18 +0900)]
kbuild: fix single directory build
Commit
f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes:
f110e5a250e3 ("kbuild: refactor single builds of *.ko")
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Sun, 16 Oct 2022 00:05:07 +0000 (17:05 -0700)]
Merge tag 'slab-for-6.1-rc1-hotfix' of git://git./linux/kernel/git/vbabka/slab
Pull slab hotfix from Vlastimil Babka:
"A single fix for the common-kmalloc series, for warnings on mips and
sparc64 reported by Guenter Roeck"
* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
Linus Torvalds [Sat, 15 Oct 2022 23:47:33 +0000 (16:47 -0700)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"I have relocated to London so not much work from me while I get
settled.
Still, OpenRISC picked up two patches in this window:
- Fix for kernel page table walking from Jann Horn
- MAINTAINER entry cleanup from Palmer Dabbelt"
* tag 'for-linus' of https://github.com/openrisc/linux:
MAINTAINERS: git://github -> https://github.com for openrisc
openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
Linus Torvalds [Sat, 15 Oct 2022 23:36:38 +0000 (16:36 -0700)]
Merge tag 'pci-v6.1-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert the attempt to distribute spare resources to unconfigured
hotplug bridges at boot time.
This fixed some dock hot-add scenarios, but Jonathan Cameron reported
that it broke a topology with a multi-function device where one
function was a Switch Upstream Port and the other was an Endpoint"
* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Distribute available resources for root buses, too"
Hyeonggon Yoo [Sat, 15 Oct 2022 04:34:29 +0000 (13:34 +0900)]
mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
After commit
d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes:
d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Palmer Dabbelt [Thu, 13 Oct 2022 21:46:37 +0000 (14:46 -0700)]
MAINTAINERS: git://github -> https://github.com for openrisc
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Steve French [Sat, 15 Oct 2022 05:43:22 +0000 (00:43 -0500)]
smb3: improve SMB3 change notification support
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
struct __attribute__((__packed__)) smb3_notify {
uint32_t completion_filter;
bool watch_tree;
uint32_t data_len;
uint8_t data[];
} __packed;
using CIFS_IOC_NOTIFY_INFO 0xc009cf0b
or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info)
The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sat, 15 Oct 2022 01:00:32 +0000 (20:00 -0500)]
cifs: lease key is uninitialized in two additional functions when smb1
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Sat, 15 Oct 2022 00:18:32 +0000 (19:18 -0500)]
cifs: lease key is uninitialized in smb1 paths
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Steve French [Fri, 14 Oct 2022 23:50:20 +0000 (18:50 -0500)]
smb3: must initialize two ACL struct fields to zero
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to
zero in create_sd_buf.
Addresses-Coverity: 1513848 ("Uninitialized scalar variable")
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Paulo Alcantara [Fri, 14 Oct 2022 20:14:54 +0000 (17:14 -0300)]
cifs: fix double-fault crash during ntlmssp
The crash occurred because we were calling memzero_explicit() on an
already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer().
Fix this by not calling memzero_explicit() on sess_data::iov[1] as
it's already by handled by callers.
Fixes:
a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data")
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Arnaldo Carvalho de Melo [Fri, 7 Aug 2020 11:45:47 +0000 (08:45 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
b8d1d163604bd1e6 ("x86/apic: Don't disable x2APIC if locked")
ca5b7c0d9621702e ("perf/x86/amd/lbr: Add LbrExtV2 branch record support")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2022-10-14 18:06:34.
294561729 -0300
+++ after 2022-10-14 18:06:41.
285744044 -0300
@@ -264,6 +264,7 @@
[0xc0000102 - x86_64_specific_MSRs_offset] = "KERNEL_GS_BASE",
[0xc0000103 - x86_64_specific_MSRs_offset] = "TSC_AUX",
[0xc0000104 - x86_64_specific_MSRs_offset] = "AMD64_TSC_RATIO",
+ [0xc000010e - x86_64_specific_MSRs_offset] = "AMD64_LBR_SELECT",
[0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG",
[0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS",
[0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL",
$
Now one can trace systemwide asking to see backtraces to where that MSR
is being read/written, see this example with a previous update:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
^C#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/lkml/Y0nQkz2TUJxwfXJd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Qi Liu [Tue, 27 Sep 2022 08:14:00 +0000 (16:14 +0800)]
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
Add support for using 'perf report --dump-raw-trace' to parse PTT packet.
Example usage:
Output will contain raw PTT data and its textual representation, such
as (8DW format):
0 0 0x5810 [0x30]: PERF_RECORD_AUXTRACE size: 0x400000 offset: 0
ref: 0xa5d50c725 idx: 0 tid: -1 cpu: 0
.
. ... HISI PTT data: size 4194304 bytes
.
00000000: 00 00 00 00 Prefix
.
00000004: 08 20 00 60 Header DW0
.
00000008: ff 02 00 01 Header DW1
.
0000000c: 20 08 00 00 Header DW2
.
00000010: 10 e7 44 ab Header DW3
.
00000014: 2a a8 1e 01 Time
.
00000020: 00 00 00 00 Prefix
.
00000024: 01 00 00 60 Header DW0
.
00000028: 0f 1e 00 01 Header DW1
.
0000002c: 04 00 00 00 Header DW2
.
00000030: 40 00 81 02 Header DW3
.
00000034: ee 02 00 00 Time
....
This patch only add basic parsing support according to the definition of
the PTT packet described in Documentation/trace/hisi-ptt.rst. And the
fields of each packet can be further decoded following the PCIe Spec's
definition of TLP packet.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-4-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Qi Liu [Tue, 27 Sep 2022 08:13:59 +0000 (16:13 +0800)]
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
HiSilicon PCIe tune and trace device (PTT) could dynamically tune the
PCIe link's events, and trace the TLP headers).
This patch add support for PTT device in perf tool, so users could use
'perf record' to get TLP headers trace data.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-3-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Qi Liu [Tue, 27 Sep 2022 08:13:58 +0000 (16:13 +0800)]
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
Add find_pmu_for_event() and use to simplify logic in
auxtrace_record_init(). find_pmu_for_event() will be reused in
subsequent patches.
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi6124@gmail.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zeng Prime <prime.zeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20220927081400.14364-2-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Thu, 6 Oct 2022 15:51:49 +0000 (21:21 +0530)]
perf tests stat+json_output: Include sanity check for topology
Testcase stat+json_output.sh fails in powerpc:
86: perf stat JSON output linter : FAILED!
The testcase "stat+json_output.sh" verifies perf stat JSON output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes:
0c343af2a2f82844 ("perf test: JSON format checking")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Athira Rajeev [Thu, 6 Oct 2022 15:51:48 +0000 (21:21 +0530)]
perf tests stat+csv_output: Include sanity check for topology
Testcase stat+csv_output.sh fails in powerpc:
84: perf stat CSV output linter: FAILED!
The testcase "stat+csv_output.sh" verifies perf stat CSV output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes:
7473ee56dbc91c98 ("perf test: Add checking for perf stat CSV output.")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 12 Oct 2022 08:22:59 +0000 (11:22 +0300)]
perf intel-pt: Fix system_wide dummy event for hybrid
User space tasks can migrate between CPUs, so when tracing selected CPUs,
system-wide sideband is still needed, however evlist->core.has_user_cpus
is not set in the hybrid case, so check the target cpu_list instead.
Fixes:
7d189cadbeebc778 ("perf intel-pt: Track sideband system-wide when needed")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 12 Oct 2022 08:22:58 +0000 (11:22 +0300)]
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
uClibc segfaulted because NULL was passed as the format to fprintf().
That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().
Add the missing format string, and check format is not NULL before calling
fprintf().
Fixes:
11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Wed, 12 Oct 2022 09:46:32 +0000 (10:46 +0100)]
perf test: Fix attr tests for PERF_FORMAT_LOST
Since PERF_FORMAT_LOST was added, the default read format has that bit
set, so add it to the tests. Keep the old value as well so that the test
still passes on older kernels.
This fixes the following failure:
expected read_format=0|4, got 20
FAILED './tests/attr/test-record-C0' - match failure
Fixes:
85b425f31c8866e0 ("perf record: Set PERF_FORMAT_LOST by default")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221012094633.21669-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ammy Yi [Fri, 14 Oct 2022 17:09:05 +0000 (20:09 +0300)]
perf test: test_intel_pt.sh: Add 9 tests
Add tests:
Test with MTC and TSC disabled
Test with branches disabled
Test with/without CYC
Test recording with sample mode
Test with kernel trace
Test virtual LBR
Test power events
Test with TNT packets disabled
Test with event_trace
These tests mostly check that perf record works with the corresponding
Intel PT config terms, sometimes also checking that certain packets do or
do not appear in the resulting trace as appropriate.
The "Test virtual LBR" is slightly trickier, using a Python script to
check that branch stacks are actually synthesized.
Signed-off-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 14 Oct 2022 17:09:04 +0000 (20:09 +0300)]
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
When a program header was added, it moved the text section but
GEN_ELF_TEXT_OFFSET was not updated.
Fix by adding the program header size and aligning.
Fixes:
babd04386b1df8c3 ("perf jit: Include program header in ELF files")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lieven Hey <lieven.hey@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>