linux-yocto: improve checkout error handling and reporting

The typical workflow for linux-yocto simply uses a remote
upstream repository (Whether it is mirrored or not), and in this
case there are no issues with consistency in the format of the
resository that is unpacked into the WORKDIR.

When working with a local linux-yocto repository for kernel
development the remote vs local branches is not always consistent
between repositories.

The suggested/documented workflow has always been to use a
bare clone of linux-yocto, and use a second working tree repository
for development. Changes flow from the working tree to the bare
clone and then into the working directory for build. A common
mistake that happens with this workflow is that the non-bare,
working repository is used instead of the bare clone version.

If a non-bare repository is reference by the SRC_URI, then the
branches that are fetched into WORKDIR are not consitent. If the
MACHINE and META branches are not present, cryptic build errors
will result.

To solve this problem, the checkout code has been changed in
several ways:

  - works with a newly proposed 'bareclone' option to bitbake
  - detects if a bareclone is present in WORKDIR or not and
    adjustst the checkout accordingly.
  - if a non-bare clone is detected, machine and meta branches
    are checked. If they are not present, or can't be created
    a clear error message is produced
  - instead of manipulating the refs directly in the git tree,
    local tracking branches are (quietly) created for remote
    branches. Enabling a better workflow in the WORKDIR kernel
    repository.

This has been tested with linux-yocto remote upstreams, local
bare and non-bare respositories. All builds succeed or fail
with clear error messages.

(From OE-Core rev: e3b6537cc7931636ab11ae6ed2c8fbaad9da91bc)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate.bbclass: improve performance of sstate package creation

* also fixes replacing paths for perl where cmd line was probably
  too long for os.system(cmd) (it had 560410 characters because a lot of
  files from sstate_scan_cmd).
* also print those 2 commands so we can find them in log.do_package

(From OE-Core rev: 94c52d68fc2ce258bcc5b0978ac73413480a1a93)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu: remove version 0.14.0

0.15.1 has been available in OE-Core for some time and has demonstrated
no major regressions, so remove the older version.

(From OE-Core rev: d242e637a2b5101985befd93d3b560f17b37504b)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libsdl: allow building without x11

Disable X11 output support for target and nativesdk if x11 is not in
DISTRO_FEATURES.

Fixes [YOCTO #2020]

(From OE-Core rev: 506e4c9b05d61f126fff112d7c111902d5c9fac5)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

qemu: enable building qemu-nativesdk without x11

Allow building for nativesdk with x11 removed from DISTRO_FEATURES
by conditionally disabling qemugl (which requires X).

Fixes [YOCTO #2020]

(From OE-Core rev: 136b13eb6a682222e2af887d3247a61310476c70)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

psplash: allow building multiple splash executables

Adds a SPLASH_IMAGES variable which you can set to include one or more
images (listed in URI form as they would appear in SRC_URI), and an
executable will be built for each one, with each executable packaged
separately and managed at runtime using the alternatives system. An
optional "outsuffix" parameter can be used to specify the suffix for the
executable/package name. The images themselves can either be
pre-processed image header files (produced using the
make-image-header.sh script that comes with psplash), or alternatively
you can provide a .png and it will be converted using the aforementioned
script on the fly (at the expense of requiring gdk-pixbuf-native at
build time).

This has been implemented in such a way that you can still just provide
your own psplash-poky-img.h in a bbappend and it will work as it did
before; the only change being that the psplash executable is provided
in a "psplash-default" package rather than in the main psplash package,
and an RRECOMMENDS is set up to ensure psplash-default gets pulled in
(if you specify your own file or change the outsuffix you will need to
either install it separately yourself or add your own RRECOMMENDS
relationship.)

Implements [YOCTO #1947]

(From OE-Core rev: d3de5f7308b4a42b809884119a670af5bedde38f)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

psplash: use OpenEmbedded logo

Use the OpenEmbedded logo for psplash in OE-Core.

(From OE-Core rev: cd321b83c78c00003f1ce06ac3ca85647cf9df51)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

fetch2/git: create bareclone option

For similar reasons as the nocheckout option, packages that need
enhanced control over the checkout and branch creation on a repository
may want a complete mirror/bareclone created of the repository when
performing the unpack.

This is useful/required when a local respository is being used, but
local tracking branches have not been created for all branches that
a given recipe needs to manipulate. The standard git clone operations
will create remote branches for the branches that are local to the
source repository, but branches that are remote do not translate to
the destination repository. Doing a mirror/bare clone of the source,
makes all branches available to the repository.

This is a particular use case, but the ability to do a bare clone
creates great flexibility in recipe space, with no impact to recipes
that don't need this functionality.

To implement this, a new option 'bareclone' is craeted which creates
a mirror copy of the repository and leaves it bare in the unpacking
phase. A recipe that uses this option must both checkout and debare
the repository itself.

(Bitbake rev: 82482aae6f311c994275fb0b6b32d954bbfc78c3)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

conf/bitbake.conf: add DISTRO_FEATURES_BACKFILL

When introducing new items to DISTRO_FEATURES that control functionality
that is already enabled, in order to leave existing distro configuration
unchanged we need a way to "backfill" these new feature items onto the
existing DISTRO_FEATURES value.

This introduces a DISTRO_FEATURES_BACKFILL variable whose items will be
added to the end of DISTRO_FEATURES, unless they also appear in
DISTRO_FEATURES_BACKFILL_CONSIDERED which distros can use in their
configuration to prevent specific items from being added.

Fixes [YOCTO #1946].

(From OE-Core rev: 738658d9d5ddef026d2929188744aa225324bf26)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glib-networking: Add intltools-native to DEPENDS

(From OE-Core rev: deb501b8a1cb3cdb1ea0a48ea08e411c2be365b3)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

task-self-hosted: add hicolor-icon-theme and socat

python-pygtk depends on libgtk and libgtk's recommends have
gdk-pixbuf-loader-{png,jpeg,gif,xpm}, so we have the warnings.
We can add hicolor-icon-theme to fix the warning:
Configuring gdk-pixbuf-loader-png.
gtk-update-icon-cache: No theme index file.
Configuring gdk-pixbuf-loader-jpeg.
gtk-update-icon-cache: No theme index file.
Configuring liberation-fonts.
Configuring gdk-pixbuf-loader-xpm.
gtk-update-icon-cache: No theme index file.
Configuring gdk-pixbuf-loader-gif.
gtk-update-icon-cache: No theme index file.

Add socat for to faciliate proxy setting.

(From OE-Core rev: d32933a74b380aac906bbfbe1ec7d89b02e9f72d)

Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mpfr: add patch to fix build for thumb

(From OE-Core rev: 68bc9416d9e4beb027133e151b1bb3ecadd2ee26)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package.bbclass: Add a sanity check to the debugsrcdir removal code

(From OE-Core rev: 9f6b9d7d0402b883fc3ad3cdead40e838ce31a27)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libfm: Fix packaging and dependency issues

Add missing pango and glib-2.0 dependencies.

Fix QA warnings:

WARNING: For recipe libfm, the following files/directories were installed but not shipped in any package:
WARNING:   /usr/lib/gio
WARNING:   /usr/lib/gio/modules
WARNING:   /usr/share/mime
WARNING:   /usr/share/mime/packages
WARNING:   /usr/share/mime/packages/libfm.xml

(From OE-Core rev: f6f527694e4f896b5d8a649f0b12f5b437c27cd1)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

runqueue: fire sceneQueueTaskStarted event when a setscene queue starts

The current code prints a log when a setscene task starts, therefore
the progressbar in hob will not receive it. Use a sceneQueueTaskStarted
event instead.

Besides, change the sceneQueueTaskFailed event to inherit runQueueEvent
directly to avoid confusion to event receiver.

(Bitbake rev: 7c07cc93d6558d7d9c3144b13493901b7ebae050)

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image.bbclass: Ensure timestamp matches format used in initscripts after recent changes

(From OE-Core rev: 173a48f79f8f2f18737f1901fc5992223d456348)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

update-rc.d.bbclass: do nothing for extended cross packages

(From OE-Core rev: a1f23a7cc527afdd1ce6cc7cd6083ee78fde09b3)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rootfs_ipk.bbclass: fix status file location in rootfs

This fixes runtime requirement checking and read-only-fs checking.

(From OE-Core rev: c50a46fbd50a148146fb1f077db20cdc8121f20b)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

meta-hob: Add a new meta-hob layer

This new layer contains hob-image.bb and hob-toolchain.bb that
are used by hob to build images or toolchain.

(From OE-Core rev: 213b5038215b1d7df10f1df0375610034fa156c7)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packageinfo.bbclass: add a new bbclass to pass package information

packageinfo.bbclass is to pass the accurate package information to
clients (e.g. Hob), including PN, PV, RDEPENDS, PKGSIZE, etc.

(From OE-Core rev: 1a0be9ec4d53cfcaea907edebe5d8bb525496b4e)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package.bbclass: set package size into pkgdata for hob2's use

Write the size of a package into its pkgdata for hob2 to get the size
and show on the UI for image making.

(From OE-Core rev: 9c446d007957dab36ee2c012f0a5b22494a7a84f)

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gthumb: Resolve staticdev QA warnings

Since the .a files are pretty useless in the case of plugin modules, lets
just remove them. This resolves the warnings:

WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libslideshow.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libimporter.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libimage_viewer.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libchange_date.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libedit_metadata.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libgstreamer_tools.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libphoto_importer.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libimage_rotation.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libfile_viewer.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libpixbuf_savers.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libexport_tools.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libconvert_format.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/librename_series.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libfile_tools.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libwebalbums.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libcatalogs.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libresize_images.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libimage_print.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libdesktop_background.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libred_eye_removal.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libcomments.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libfile_manager.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libjpeg_utils.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libgstreamer_utils.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/liblist_tools.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libbookmarks.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libsearch.a'
WARNING: QA Issue: non -staticdev package contains static .a library: gthumb path '/work/x86_64-poky-linux/gthumb-2.12.4-r1/packages-split/gthumb/usr/lib/gthumb/extensions/libraw_files.a'

(From OE-Core rev: a31d0dbd03b437de9c64a160e86ef97ef7e08807)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

autotools.bbclass: Make builds deterministic

We need to ensure any aclocal-copy directory is removed before we s
earch for .m4 files, else the locations .m4 files are found from can
vary depending on whether its the first or second time we run configure.

Clearing any existing aclocal-copy directory before we start resolves
this issue and makes builds deterministic again.

(From OE-Core rev: 673e2a05013cbe08efde936f663845031025689d)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

insane.bbclass: Only depend on desktop-file-utils-native when we need it

There is no point in depending on desktop-file-utils if we're not going to
use it. This patch makes the dependency conditional upon the desktop tests
being enabled.

(From OE-Core rev: f775f76dc01f1a969c00f697507958d8a4f9b088)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package.bbclass: Remove empty directories created as part of srcdebug handling

We can create directories like /usr/src/debug as part of the debug file
manipulations. If these are going to end up empty, remove them to avoid QA
warnings like:

WARNING: For recipe task-core-x11, the following files/directories were installed but not shipped in any package:
WARNING:   /usr
WARNING:   /usr/src
WARNING:   /usr/src/debug
WARNING: For recipe task-core-console, the following files/directories were installed but not shipped in any package:
WARNING:   /usr
WARNING:   /usr/src
WARNING:   /usr/src/debug

(From OE-Core rev: 4f4451f7c0f9762092eb3dbc995b4afa2572ceb6)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dbus-glib: Correctly package bash completion pieces to avoid QA warning

WARNING: For recipe dbus-glib, the following files/directories were installed but not shipped in any package:
WARNING:   /etc
WARNING:   /etc/bash_completion.d
WARNING:   /etc/bash_completion.d/dbus-bash-completion.sh
WARNING:   /usr/libexec/dbus-bash-completion-helper

(From OE-Core rev: 8f0d188df4aaccc3fd4911f12c532f81ae9714a7)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

glib-2.0: Fix unpackaged files warning

WARNING: For recipe glib-2.0, the following files/directories were installed but not shipped in any package:
WARNING:   /usr/lib/gio
WARNING:   /usr/lib/gio/modules

(From OE-Core rev: a85f283ffae5407b23532ce2262142ee2d986af2)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cracklib: Fix unpackaged files warning by disabling autodetected python

WARNING: For recipe cracklib, the following files/directories were installed but not shipped in any package:
WARNING:   /usr/lib/python2.7
WARNING:   /usr/lib/python2.7/site-packages

(From OE-Core rev: f9b184b9454da8374de7351af8619d0201d6f843)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libgcrypt: Fix unpackaged file warning

WARNING: For recipe libgcrypt, the following files/directories were installed but not shipped in any package:
WARNING:   /usr/sbin

(From OE-Core rev: db3d5baa07ce8c81d229fdea4d80671768efa7a3)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

readline: Add a patch to remove the redundant rpath linker option

This resolves the QA warnings:

WARNING: QA Issue: readline: /work/x86_64-poky-linux/readline-6.2-r0/packages-split/readline/usr/lib/libhistory.so.6.2 contains probably-redundant RPATH /usr/lib
WARNING: QA Issue: readline: /work/x86_64-poky-linux/readline-6.2-r0/packages-split/readline/usr/lib/libreadline.so.6.2 contains probably-redundant RPATH /usr/lib
WARNING: QA Issue: readline: /work/x86_64-poky-linux/readline-6.2-r0/packages-split/readline/usr/lib/libreadline.so.6 contains probably-redundant RPATH /usr/lib
WARNING: QA Issue: readline: /work/x86_64-poky-linux/readline-6.2-r0/packages-split/readline/usr/lib/libhistory.so.6 contains probably-redundant RPATH /usr/lib

(From OE-Core rev: fe8661cd30b02dd8ea9bf172479f372c919c36a7)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libusb-compat: Address unpackaged files warning

WARNING: For recipe libusb-compat, the following files/directories were installed but not shipped in any package:
WARNING:   /lib/libusb.la

(From OE-Core rev: 019747e5fe834092731cdb2987d9c6e1f7fd1cc1)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libusb1: Address unpackaged files warning

WARNING: For recipe libusb1, the following files/directories were installed but not shipped in any package:
WARNING:   /lib/libusb-1.0.la

(From OE-Core rev: 3155ace4bd2c9ba0ecb0db4c65778601eb5ed186)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rpm: Fix LICENSE field

This addresses the warning:

WARNING: rpm: No generic license file exists for: LGPL in any provider
WARNING: rpm: No generic license file exists for: 2.1 in any provider

(From OE-Core rev: 2345f788c9206b87804292c0afdd73f565784d45)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

eglibc: Fix package warning

WARNING: For recipe eglibc, the following files/directories were installed but not shipped in any package:
WARNING:   /usr/lib/locale

(From OE-Core rev: d8c24378c6813036fcf9bc88cac919c3443c1446)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

distro_tracking_fields: fix typos

(From OE-Core rev: 1034e798cbab0bd16e35db6ae750f146fc8689c1)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

task-self-hosted: make the package lists alphabetical

This patch makes no actual change to the functionality of the recipe.

(From OE-Core rev: 0dff62c849650f3fa51ce80979b4d80dcc0d36f1)

Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

task-self-hosted: remove duplicate packages

The package names are specified more than once.
We only need to keep one for each of them, so let's remove the duplicated
ones.
This patch makes no actual change to the functionality of the recipe.

(From OE-Core rev: 121a1499a81706366acc0081272a6bff634d4d62)

Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

A script to clean obsolete sstate cache files

There would be many obsolete cache files in the SSTATE_DIR after several
builds, this script can remove the obsolete one for a pkg, only leave
the up to date one.

Here is the help text:

sstate-cache-management.sh <OPTION>

Options:
  --help, -h
        Display this help and exit.

  --cache-dir=<sstate cache dir>
        Specify sstate cache directory, will use the environment
        variable SSTATE_CACHE_DIR if it is not specified.

  --remove-duplicated
        Remove the duplicated sstate cache files of one package, only
        the newest one would be kept.

[YOCTO #1682]

(From OE-Core rev: 7c99ef6d2173b14e1109a540ee5ae47b56d707e7)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

openssl: Move libcrypto to base_libdir

This fix is for dhclient. It needs libcrypto at runtime and if
libcrypto is in libdir, it's path can be inaccessible on systems
where /usr is on nfs for example or dhclient is needed before
/usr is mounted.

(From OE-Core rev: 01ea85f7f6c53c66c76d6f832518b28bf06ec072)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
[Fix comment to from /usr -> /lib - sgw]

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

boot-directdisk: Use correct SYSLINUX_TIMEOUT and SYSLINUX_ROOT instead of APPEND

(From OE-Core rev: 1284230ad554f8607cb02b054fdd74017ae7c861)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image-live: fix SYSLINUX_TIME and add SYSLINUX_ROOT instead of APPEND

(From OE-Core rev: e03d5cbdfc39a835576b16a0beeea6858e983f56)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image_types: add vmdk type to use with VMware

(From OE-Core rev: c18e6d444929c32a714b3e46f21567867e48814c)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

syslinux: add SYSLINUX_ROOT to APPEND line

By prepending the SYSLINUX_ROOT to the APPEND line, will allow a sane default
to be set for the various syslinux images

(From OE-Core rev: 47f53bc7998aa8390f846e939b6a7f6df3789777)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

syslinux: Use SYSLINUX_TIMEOUT and SYSLINUX_PROMPT to configure syslinux

syslinux allows you to set TIMEOUT and PROMPT variables, when PROMPT is 0,
the "boot:" is not displayed uless one presses CTRL or SHIFT during startup.
TIMEOUT is in 1/10th of seconds, and a value of 0 for TIMEOUT will disable
the timeout mechanism.

In bitbake, recipes had set TIMEOUT (not SYSLINUX_TIMEOUT) incorrectly, other
patches fix this issues.  We are adding SYSLINUX_PROMPT to enable/disable the
"boot:" prompt in syslinux.

See http://www.syslinux.org/wiki/index.php/SYSLINUX for more details

(From OE-Core rev: be04e3b2e13c1a7e1cd5416771b72a80ec52b8ad)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

ppp: Fix rp-pppoe plugin compilation

rp-pppoe plugin was broken due linux headers changes: pppd has own copy of
if_pppol2tp.h file which is included from <linux/if_pppox.h>.

Add patch from Debian for struct pppol2tpv3_addr definition.

(From OE-Core rev: bc2581aff2a859b414c8097514527a9b5b0ab2a6)

Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

mpeg2dec: depend on libx11 conditionally

* mpeg2dec currently doesn't build if x11 is unavailable,
  due to an unconditional dependency on libx11. However,
  libx11 is not required to build mpeg2dec.

(From OE-Core rev: 6ebbeeb0bcd29aec25e2c437d0bc95dd78d62f82)

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gst-plugins-base: depend on libx11 and libxv conditionally

* gst-plugins-base currently doesn't build if x11 is
  unavailable, due to unconditional dependencies on libx11
  and libxv. However, they are not required to build
  gst-plugins-base.

(From OE-Core rev: 668ebf38a5b9b0dbd0f6f1a0ebfafb04afbcbf07)

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

e2fsprogs: Cope with ${libdir} and ${base_libdir} being the same

${libdir} and ${base_libdir} may be the same. If they are don't try and
move files onto themselves.

(From OE-Core rev: 992604c533c9f3c2133cfa87c1121d43a508ec4a)

Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

busybox: don't create /etc/default

* It's not used by the recipe and its creation
  currently depends on CONFIG_HWCLOCK=y.

(From OE-Core rev: cd59c2fcefa6aeacf78a63c5c9a623a4d77c0941)

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dbus: Remove empty ${lindir}dbus-1.0/test directory as we don't build tests

This empty directory generates a QA warning of unshippped files/dirs.

(From OE-Core rev: d3573ae136c532d3cf537ef05c22f163275f4f41)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

e2fsprogs: e2initrd_helper was moved in libdir but not packaged correctly in FILES_libext2fs

The new install path of e2initrd_helper is %{libdir}. FILES_libext2fs modified accordigly to
avoid QA warnings.

(From OE-Core rev: 31684b34f3521e97dbfd35ff961960b9792ef657)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

nspr: Add patch in order to remove rpath from binaries

This patch was created in order to avoid QA warnings.

(From OE-Core rev: 16b8a25ec03b9e9f360290263593b9f8f92bb9e1)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

nspr: Compile nspr with tests

1. Compile package tests suite
2. Add tests to -dev rpm as it needs dev libraries

(From OE-Core rev: c78db5086091e09e510fcd275918aee0949483c1)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

nspr: Integrate version 4.8.9

(From OE-Core rev: cbe6eced99566129c575b43a58cdde2ac669a741)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Sergey 'Jin' Bostandzhyan <jin@mediatomb.cc>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

dhcp: Update to 4.2.3-P2

1. Update to 4.2.3-P2
2. From 4.2.0 final release, -lcrypto check was removed and we compile static libraries
from bind that are linked to libcrypto. This is why i added a patch in order to add
-lcrypto to LIBS.
3. Add openssl in DEPENDS as we need libcrypto from this package
4. Drop installing /var/lib/dhcp/ as it is handled in pkg_postinst

(From OE-Core rev: 1cd882c47865a501d5401bad44e1c7f460ce2699)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

autotools.bbclass: Don't copy into non-existant directory

* If configure.ac contains AM_GNU_GETTEXT and po/Makefile.in.in
  doesn't exist, autotools_do_configure() copies a local
  version of Makefile.in.in to this location. If the directory
  'po' doesn't exist, the function aborts.

* This patch verifies that the directory exists before copying
  a file to it. This fixes libcddb, which uses AM_GNU_GETTEXT,
  but has no 'po' directory.

(From OE-Core rev: ba175bdfe85d701298d28e5190e55207420a24e8)

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wireless-tools: remove ldconfig call from install-libs

* and drop apply=yes param as it's not needed

(From OE-Core rev: ca343882f8e95b49b18b234000e387c879cf5885)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

initscripts: Make /etc/timestamp consistent again.

Commit cc8695 changed the way timestamps were handled
and added some extra munging to be able to compare them
reliably.  This change makes the timestamp value the same
everywhere and simplifies how the check to set the system
clock based on the timestamp is done.

Also, if the value stored in /etc/timestamp is newer
[at all] than the current system time, set the system clock
from the stored value, down to the minute, not just the day.

(From OE-Core rev: 5aab6653c9afa05e7c1b3ccd6bd34aec05c2a6f8)

Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xorg-lib: don't build libs unless requested by DISTRO_FEATURES

* If 'x11' is not set in DISTRO_FEATURES, then skip all
  recipes using xorg-lib-common.inc instead of only those
  using libx11.inc.

* One exception: pixman, which is not only used by xorg,
  but also by cairo.

(From OE-Core rev: a101bc85adcc915f151348107e850b8998a395b0)

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

e2fsprogs: remove ldconfig call from install-libs

(From OE-Core rev: 6a74c2050de4540deaf4e855bdf7aec4518f648a)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate.bbclass: add *_config to SSTATE_SCAN_FILES

* e.g. mysql5 has mysql_config not mysql-config

(From OE-Core rev: aebdffc93ba8446bbd4e20263f0f75d4d4460c47)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

apr: add apr_rules.mk to SSTATE_SCAN_FILES

(From OE-Core rev: 9db1f3b13c7e7f37c41f6a4fabdb2fc0c5ebc227)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libsdl 1.2.14: regenerate patch so it applies with 'patch' as well as 'git apply'

The '@@ -, +, @@' part upsets plain 'patch'

(From OE-Core rev: 949f4dc6f2bd59aa3e2c782fee87f07438aebd21)

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstatesig.py: Move package exclusion list to the layer config

its desireable for other layers to be able to append to the list of packages
with 'safe ABI's which are excluded from the sstate signatures.

I can't emphasise enough how careful you need to be with this list, anything
excluded here needs to be things which don't change interface and are consistent
between different machines.

(From OE-Core rev: 5adef35691a956c3071c0a1ed1caf6b58d1ec5a1)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstatesig.py: Add handling for machine specific module dependencies

Adding dependencies on machine specific recipes from generic packages
causes a rebuild of the generic package per machine if using signatures
for the stamp files which is unacceptable.

We need to declare that RRECOMMENDS on kernel-module-* are safe
and that we shouldn't care about these machine specific dependencies
from a stamp perspective. This change adds code which does this.

It depends on a change in bitbake to expose the dataCache object
which can be used to make the calculations we need to allow this to
work correctly.

(From OE-Core rev: 91fc672756d45086cdf4e9c6de8e920dcd8cd14e)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

python: add Makefile to SSTATE_SCAN_FILES

* it contains sysroot specific paths, this is from om-gta04 sysroot and
  notice nokia900
  ./usr/lib/python2.7/config/Makefile:CC=         arm-oe-linux-gnueabi-gcc  -march=armv7-a -fno-tree-vectorize      -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 -D__SOFTFP__ --sysroot=/OE/shr-core/tmp-eglibc/sysroots/nokia900
  ./usr/lib/python2.7/config/Makefile:CXX=                arm-oe-linux-gnueabi-g++  -march=armv7-a -fno-tree-vectorize      -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 -D__SOFTFP__ --sysroot=/OE/shr-core/tmp-eglibc/sysroots/nokia900
  ./usr/lib/python2.7/config/Makefile:LDFLAGS=-L. -L/OE/shr-core/tmp-eglibc/sysroots/nokia900/usr/lib     -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed
  ./usr/lib/python2.7/config/Makefile:LIBDIR=             /OE/shr-core/tmp-eglibc/sysroots/nokia900/usr/lib
  ./usr/lib/python2.7/config/Makefile:INCLUDEDIR= /OE/shr-core/tmp-eglibc/sysroots/nokia900/usr/include
  ./usr/lib/python2.7/config/Makefile:CONFIG_ARGS=         '--build=x86_64-linux' '--host=arm-oe-linux-gnueabi' '--target=arm-oe-linux-gnueabi' '--prefix=/usr' '--exec_prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--libexecdir=/OE/shr-core/tmp-eglibc/sysroots/nokia900/usr/libexec' '--datadir=/usr/share' '--sysconfdir=/etc' '--sharedstatedir=/com' '--localstatedir=/var' '--libdir=/usr/lib' '--includedir=/OE/shr-core/tmp-eglibc/sysroots/nokia900/usr/include' '--oldincludedir=/usr/include' '--infodir=/usr/share/info' '--mandir=/usr/share/man' '--disable-silent-rules' '--disable-dependency-tracking' \
  '--with-libtool-sysroot=/OE/shr-core/tmp-eglibc/sysroots/nokia900' '--with-threads' '--with-pymalloc' '--with-cyclic-gc' '--without-cxx' '--with-signal-module' '--with-wctype-functions' '--enable-shared' 'build_alias=x86_64-linux' 'host_alias=arm-oe-linux-gnueabi' 'target_alias=arm-oe-linux-gnueabi' 'CC=arm-oe-linux-gnueabi-gcc  -march=armv7-a -fno-tree-vectorize      -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 -D__SOFTFP__ --sysroot=/OE/shr-core/tmp-eglibc/sysroots/nokia900' 'CFLAGS=-O2 -pipe -g -feliminate-unused-debug-types' 'LDFLAGS=-L. -L/OE/shr-core/tmp-eglibc/sysroots/nokia900/usr/lib-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed' 'CPPFLAGS=' 'CPP=arm-oe-linux-gnueabi-gcc -E --sysroot=/OE/shr-core/tmp-eglibc/sysroots/nokia900  -march=armv7-a -fno-tree-vectorize      -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 -D__SOFTFP__'
  ./usr/lib/python2.7/config/Makefile:            $(RUNSHARED) /OE/shr-core/tmp-eglibc/sysroots/nokia900/usr/libexec/oah/translate ./$(BUILDPYTHON) -E -tt $(TESTPROG) -uall $(TESTOPTS)

(From OE-Core rev: bf1628286987ad6b4a762b0aeb6aece4a51e7255)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oe/utils.py: use bb.utils.vercmp_string

Fixes the following warning:

| WARNING: .../meta/lib/oe/utils.py:31: DeprecationWarning: Call to deprecated function bb.vercmp_string: Please use bb.utils.vercmp_string instead.
|  result = bb.vercmp(d.getVar(variable,True), checkvalue)

(From OE-Core rev: 925a9729afaa9cd498661f7f363112c974b023a2)

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: change for adding progress bar in Hob2.

The changes include:
- Clean some events in event.py
- Fire essential events for Hob2 to handle with more information.
- knotty changes

(Bitbake rev: 9ede881620c501574f014e600cea6947ea908ac2)

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

command.py: add resolve option for generateTargetsTree API

Currently we have generateTargetsTree API, which is used to get
dependency information. However in that tree, there will be
"virtual/xxx" in depends fields. Therefore we add the resolve option
to replace it with its real providers.

Besides, for packages that provided by multiple recipes, we will find
their preverred provider.

(Bitbake rev: 28501612efdfc6ee47576cc90deb6e897883e7f5)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

command.py: Add a new API triggerEvent()

This functions enables the client to request triggering specific event
from bitbake server.

(Bitbake rev: 45da6d709a69697158fae92e1c0c0a6ac8f30831)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

command.py: add new API to get the cpu count on the server

Add a new API in command.py to get the cpu count in order to set the appropriate default BB_NUMBER_THREADS and PARALLEL_MAKE variables.

(Bitbake rev: 335047b2e440e65713e88fabb24b47a9c82f939b)

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: Add client socket info for BitBakeServerConnection

In server/client split model, the client will bind to a specific address
and port. We need to pass the values to BitBakeServerConnection().

(Bitbake rev: c8e19c5c389efc06696084c6f9439ba75472c5b7)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: add -B option to bind with interface

When start bitbake as a server only process, we need to assign certain
interface to it.

(Bitbake rev: 95b97d2dc6466ea3d99371f5b5bd68f6f3c99074)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

event.py: Add new events RequestPackageInfo and PackageInfo

RequestPackageInfo is triggered by GUI client to request the available
package information.

PackageInfo event is to pass package information back to GUI.

(Bitbake rev: 9020c2d4476766f63ff7e024bbd99043d06feefc)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cache: Use configuration's hash value to validate cache

Previously we use the file time stamp to judge if a cache is valid.
Here this commit introduce a new method, which calculates the total
hash value for a certain configuration's key/value paris, and tag
it into cache filename, for example, bb_cache.dat.xxxyyyzzz.

This mechanism also ensures the cache's correctness if user
dynamically setting variables from some frontend GUI, like HOB.

(Bitbake rev: 1c1df03a6c4717bfd5faab144c4f8bbfcbae0b57)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: add file and line number to ParseError

Ensure that a file and line number are reported for ParseError where
possible. This helps particularly in the case of inherit and require
which previously did not report either of these upon failure.

(Bitbake rev: f588ba69622a2df35417ced184e56c79ac1b40d5)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: fix parse errors not being reported

Fixes a regression introduced in BitBake rev
c9f58ef6b897d3fa5b0d23734b5f2cb3dabb057a which prevents errors during
parsing from being fully reported because BitBake shuts down before it
can print them. Move the error printing to before the shutdown in order
to fix it.

Also remove a couple of superfluous calls to sys.exit() since these
will never be called (as self.shutdown(clean=False) does this itself).

(Bitbake rev: 356c42ed00541dea2c382c57f768a4f431d22db0)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

siggen.py: Pass the datacache to signature generator classes

The dataCache exposes much useful information to the singature generation code
for example its possible to figure out whether kernel dependencies are
important or not based on the RRECOMMENDS values.

We therefore pass this information to the handler and trust it to handle
any API changes in the dataCache structure.

For backwards compatibility, OE-Core is already updated to handle
the extra argument when it appears.

(Bitbake rev: 4ebc25155d5f96a7f63de22b52b18d045eb4dec7)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

texi2html: Fix for multilib

(From OE-Core rev: 55f72b98f606c1554eb6edd151292ffdfddf1384)

Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

quicky: Fix for multilib

(From OE-Core rev: 1be7873cec6630ddb485590a8473e04cfb224615)

Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

netbase: remove redundant assignments

There's no need to explicitly set PACKAGE_ARCH = MACHINE_ARCH, base.bbclass
takes care of setting this value for us based on the interfaces for those
machines being an OVERRIDE.

(From OE-Core rev: c3d5800d2850a186f91b5a0db642aa5d1c20156b)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

base.bbclass: check all entries of FILESPATH for MACHINE overrides

The logic which looks for MACHINE overrides in SRC_URI and updates
PACKAGE_ARCH was checking only certain subdirectories of the recipes parent
which, amongst other issues, doesn't account for SRC_URI overrides in layers.

This patch changes the logic such that all FILESPATH entries are checked
for children named for MACHINE.

(From OE-Core rev: f2b572072c754048aaafdc4c42b71af87d61d9e7)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

external-csl-toolchain: skip parsing if CSL_VER_MAIN isn't set

(From OE-Core rev: 264d1254e5ac11613af06c0f1c53c736f54e9f54)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sanity.bbclass: Add ABI version 8, used for transition from the OEBasic to OEBasicHash stamp layout

(From OE-Core rev: bf440fd971dd549ae4e92c54046ea062ef51cd85)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/ui/knotty: fix incorrect exit code

The recent Ctrl+C patch was not fully tested; the variable it was
relying upon is set to non-zero under other circumstances and thus
bitbake was reporting that it was interrupted and returning a non-zero
exit code when it was not. Track this status in a separate variable
in order to fix the issue.

(Bitbake rev: 95a599067650902727ecb4a39d6dd003c5cfedf3)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

siggen: compare runtaskdeps dictionary even when they have the same size

* otherwise it reports lots of changed checksums just because it compares different tasks

  notice linux-libc-headers_3.1.bb.do_package_write:
  Task dependency hash changed from 42acced29debf54d598802474c5e9cbb to f438a54f995df77620d0727d6f4b4ce5 (for linux-libc-headers_3.1.bb.do_package_write and linux-gta04_git.bb.do_deploy)
  Task dependency hash changed from 61f8babe1d10c6e7fb1423112bb04e1e to 1b3e21ff106ecfcb7ddf76a1e29537bb (for linux-nokia900-meego_git.bb.do_deploy and linux-gta04_git.bb.do_package_write)
  Task dependency hash changed from 512f9d6686d760b318d8b11c8b589226 to 42acced29debf54d598802474c5e9cbb (for linux-nokia900-meego_git.bb.do_package_write and linux-libc-headers_3.1.bb.do_package_write)
  Task dependency hash changed from 153e91dfd1d2053fda7b98cc08d4b802 to 92a293bdd8ed234932b87a66025038c5 (for systemd-serialgetty.bb.do_package_write and systemd-serialgetty.bb.do_package_write)
  Task dependency hash changed from 730abebf9954794bb440c2f3239f79fe to 413eaebaff27a2fd16f5cf68c1f4ff17 (for systemd_git.bb.do_package_write and systemd_git.bb.do_package_write)

  with this patch:
  Dependency on task linux-nokia900-meego_git.bb.do_package_write was added
  Dependency on task linux-nokia900-meego_git.bb.do_deploy was added
  Dependency on task linux-gta04_git.bb.do_deploy was removed
  Dependency on task linux-gta04_git.bb.do_package_write was removed
  Hash for dependent task systemd_git.bb.do_package_write changed from 730abebf9954794bb440c2f3239f79fe to 413eaebaff27a2fd16f5cf68c1f4ff17
  Hash for dependent task systemd-serialgetty.bb.do_package_write changed from 153e91dfd1d2053fda7b98cc08d4b802 to 92a293bdd8ed234932b87a66025038c5

* added test if there is different task with same hash then we don't
  show it as added/removed dependency, because bitbake doesn't care

(Bitbake rev: ca52bf32b479811bd7fed41648bedcc06b00430b)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/knotty: ensure CommandFailed increases error count

CommandFailed already sets the return code, so we print out the error
summary message, however we don't increase the error count so it is
usually zero in this case. As we are actually showing an ERROR message,
increment the error count so that the summary makes sense.

(Bitbake rev: aeb71c3ca65dc42015c29c0e4cac050bfbcb51a5)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/knotty: ensure we return non-zero exit code on Ctrl+C

If the user uses Ctrl+C to exit out of the build, then ensure we return
a non-zero exit code since the entire build was not completed
successfully.

If nothing else, this is useful to avoid continuing in the bitbake
wrapper script in OE-Core if the initial pseudo build is interrupted.

(Bitbake rev: c11eab7fa230f1fd5cc33589f3555b94e95f202d)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: show appropriate warnings for universe target

When building the universe target:
* Show a warning about universe likely producing errors
* Multiprovider errors are now shown as warnings

Also remove an unused "error" variable in runqueue.py.

Fixes [YOCTO #1936]

(Bitbake rev: 293c796e8a3d1f74ca1e51017b6dede261612281)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Fix parser hang at 0% with single-core machines

The number of threads is self.num_processes - 1 due to the range(1,
self.num_processes). Fixed by changing to range(0, self.num_processes).

(Bitbake rev: adc041fd9e3def29cdf9c1ae4849c5383bac46e5)

Signed-off-by: Caleb Crome <caleb@signalessence.com>
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

persist_data: survive if sqlite3 couldn't enable the shared cache

(Bitbake rev: e870fd57bb84a17a871a5b5de3bf5202fe9b135f)

Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

knotty: shut down more cleanly

This ensures that when we are shutting down, we drain the queue of events from
the server. This ensures that the server never gets hung up on the join of the
feeder thread associated with the event queue, thereby avoiding a bitbake hang
issue.

Also, since the third keyboard interrupt now behaves the same as the second,
removed that message.

(Bitbake rev: ce9e0946b8a412616074809c76fba54f8bff36c4)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cooker: roll our own process pool

This fixes the hang issue encountered with parse errors. The underlying issue
seems to have been the pool.terminate(). This sends SIGTERM to each of the
multiprocessing pool's processes, however, a python process terminating in
this fashion can corrupt any queues it's interacting with, causing a number of
problems for us (e.g. the queue that sends events to the UI).

So instead of using multiprocessing's pool, we roll our own, with the ability
to cancel the work. In the very long term, the python concurrent.futures
module introduced in python 3.2 could be used to resolve this as well.

(Bitbake rev: 7c39cfd8e060cca8753ac4114775447b18e13067)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

iputils: Add base_libdir to VPATH in order to find the crypto library

(From OE-Core rev: d4ffe12ca36bf10be4e0f9565d7c3d8e6f4a265a)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

consolekit: depend on libx11

* Fixes the following error at configure time:

|checking for TOOLS... no
|configure: error: Package requirements (x11 >= 1.0.0
|  glib-2.0 >= 2.14
|) were not met:
|
|No package 'x11' found

(From OE-Core rev: e5c60517a22997bb966bbe21a2d7cbc99a97b42b)

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

udev.inc has a bad link for udev home page; update the link

Fixed bad link in udev.inc to the udev home page / documentation on
kernel.org

(From OE-Core rev: 479b9a52a013d990da296f96bd658db00423f9a6)

Signed-off-by: Robert Cochran<yocto@mindchasers.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Add sanity checks for eglibc locale

Add sanity checks that test for the existance of folders. This allows to use
an external binary toolchain that doesn't have localization support.

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libsdl: add fix for new _XGetRequest symbol backported to libx11

(From OE-Core rev: d2c96e22de19a649ff7121e5ea0f95797abba93a)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

eds-tools: Update it to fix the build error

The head file 'libedataserver/e-data-server-module.h' has been moved
to 'libebackend/e-data-server-module.h', just update eds-tools to get
the latest changes for fixing the path of 'e-data-server-module.h'.

Also update its recipe file to reflect it has been converted to git
repo and split all generated binaries to correct packages.

[YOCTO#1786]

(From OE-Core rev: 38d74ee1fe6f28ec4d7db79f550c7d2830d922fb)

Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

buildhistory_analysis: correctly split RDEPENDS/RRECOMMENDS

Split RDEPENDS and RRECOMMENDS correctly (which may contain version
number specifications after each item).

(From OE-Core rev: d974ed4330f33c4f8dfd635a83c61a0d44e688b6)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>